The NVMe driver only requests the PCIe device's memory regions but releases
all possible regions (including eventual I/O regions). This leads to a stale
warning entry in dmesg about freeing non existent resources.
Jan Glauber [Wed, 8 Jun 2016 06:51:17 +0000 (08:51 +0200)]
i2c: octeon: Missing AAK flag in case of I2C_M_RECV_LEN
During receive the controller requires the AAK flag for all
bytes but the final one. This was wrong in case of I2C_M_RECV_LEN,
where the decision if the final byte is to be transmitted
happened before adding the additional received length byte.
Set the AAK flag if additional bytes are to be received.
There are also bunch of AML methods that that the BIOS can use to access
these fields. Most of the systems in question AML methods accessing the
SMBI OpRegion are never used.
Now, because of this SMBI OpRegion many systems fail to load the SMBus
driver with an error looking like one below:
ACPI Warning: SystemIO range 0x0000000000003040-0x000000000000305F
conflicts with OpRegion 0x0000000000003040-0x000000000000304F
(\_SB.PCI0.SBUS.SMBI) (20160108/utaddress-255)
ACPI: If an ACPI driver is available for this device, you should use
it instead of the native driver
The reason is that this SMBI OpRegion conflicts with the PCI BAR used by
the SMBus driver.
It turns out that we can install a custom SystemIO address space handler
for the SMBus device to intercept all accesses through that OpRegion. This
allows us to share the PCI BAR with the AML code if it for some reason is
using it. We do not expect that this OpRegion handler will ever be called
but if it is we print a warning and prevent all access from the SMBus
driver itself.
Ben Dooks [Thu, 9 Jun 2016 10:38:34 +0000 (11:38 +0100)]
drivers: of: add definition of early_init_dt_alloc_reserved_memory_arch
The function early_init_dt_alloc_reserved_memory_arch is defined
in drivers/of/of_reserved_mem.c but is not declared in any of the
header files. Add the declaration of this to avoid the warning:
drivers/of/of_reserved_mem.c:31:19: warning: symbol 'early_init_dt_alloc_reserved_memory_arch' was not declared. Should it be static?
Gavin Shan [Thu, 9 Jun 2016 05:50:49 +0000 (15:50 +1000)]
drivers/of: Fix depth for sub-tree blob in unflatten_dt_nodes()
The function is unflattening device sub-tree blob if @dad passed to
the function is valid. Currently, this functionality is used by PPC
PowerNV PCI hotplug driver only. There are possibly multiple nodes
in the first level of depth, fdt_next_node() bails immediately when
@depth becomes negative before the second device node can be probed
successfully. It leads to the device nodes except the first one won't
be unflattened successfully.
This fixes the issue by setting the initial depth (@inital_depth) to
1 when this function is called to unflatten device sub-tree blob. No
logic changes when this function is used to unflatten non-sub-tree
blob.
David S. Miller [Thu, 9 Jun 2016 18:52:47 +0000 (11:52 -0700)]
Merge tag 'mac80211-for-davem-2016-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Two more fixes for now:
* a fix for a long-standing iwpriv 32/64 compat issue
* two fairly recently introduced (4.6) warning asking for
symmetric operations are erroneous and I remove them
====================
Ido Schimmel [Thu, 9 Jun 2016 07:51:40 +0000 (09:51 +0200)]
mlxsw: spectrum: Don't sleep during ndo_get_phys_port_name()
When rtnl_fill_ifinfo() is called for a certain netdevice it queries its
various parameters such as switch id and physical port name. The
function might get called in an atomic context, which means the
underlying driver must not sleep during the query operation.
Don't query the device and sleep during ndo_get_phys_port_name(), but
instead store the needed parameters in port creation time.
Fixes: 2bf9a58675c5 ("mlxsw: spectrum: Add support for physical port names") Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Ido Schimmel [Thu, 9 Jun 2016 07:51:39 +0000 (09:51 +0200)]
mlxsw: spectrum: Make split flow match firmware requirements
When a port is created following a split / unsplit we need to map it to
the correct module and lane, enable it and then continue to initialize
its various parameters such as MTU and VLAN filters.
Under certain conditions, such as trying to split ports at the bottom
row of the front panel by four, we get firmware errors.
After evaluating this with the firmware team it was decided to alter the
split / unsplit flow, so that first all the affected ports are mapped,
then enabled and finally each is initialized separately.
Fix the split / unsplit flow by first mapping and enabling all the
affected ports. Newer firmware versions will support both flows.
Fixes: 18f1e70c4137 ("mlxsw: spectrum: Introduce port splitting") Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
drm/amdgpu: add pipeline sync while vmid switch in same ctx
Since vmid-mgr supports vmid sharing in one vm, the same ctx could
get different vmids for two emits without vm flush, vm_flush could
be done in another ring.
Prasun Maiti [Mon, 6 Jun 2016 14:34:19 +0000 (20:04 +0530)]
wext: Fix 32 bit iwpriv compatibility issue with 64 bit Kernel
iwpriv app uses iw_point structure to send data to Kernel. The iw_point
structure holds a pointer. For compatibility Kernel converts the pointer
as required for WEXT IOCTLs (SIOCIWFIRST to SIOCIWLAST). Some drivers
may use iw_handler_def.private_args to populate iwpriv commands instead
of iw_handler_def.private. For those case, the IOCTLs from
SIOCIWFIRSTPRIV to SIOCIWLASTPRIV will follow the path ndo_do_ioctl().
Accordingly when the filled up iw_point structure comes from 32 bit
iwpriv to 64 bit Kernel, Kernel will not convert the pointer and sends
it to driver. So, the driver may get the invalid data.
The pointer conversion for the IOCTLs (SIOCIWFIRSTPRIV to
SIOCIWLASTPRIV), which follow the path ndo_do_ioctl(), is mandatory.
This patch adds pointer conversion from 32 bit to 64 bit and vice versa,
if the ioctl comes from 32 bit iwpriv to 64 bit Kernel.
Johannes Berg [Thu, 9 Jun 2016 07:40:55 +0000 (09:40 +0200)]
cfg80211: remove get/set antenna and tx power warnings
Since set_tx_power and set_antenna are frequently implemented
without the matching get_tx_power/get_antenna, we shouldn't
have added warnings for those. Remove them.
The remaining ones are correct and need to be implemented
symmetrically for correct operation.
Cc: [email protected] Fixes: de3bb771f471 ("cfg80211: add more warnings for inconsistent ops") Signed-off-by: Johannes Berg <[email protected]>
Shweta Choudaha [Wed, 8 Jun 2016 19:15:43 +0000 (20:15 +0100)]
ip6gre: Allow live link address change
The ip6 GRE tap device should not be forced to down state to change
the mac address and should allow live address change for tap device
similar to ipv4 gre.
These are incremental changes from v1 of cls_u32 fixes.
First patch is reposted in its entirety, patch 2 is an
incremental change from patch 2 of the original series.
====================
Jakub Kicinski [Wed, 8 Jun 2016 19:11:04 +0000 (20:11 +0100)]
net: cls_u32: be more strict about skip-sw flag for knodes
Return an error if user requested skip-sw and the underlaying
hardware cannot handle tc offloads (or offloads are disabled).
This patch fixes the knode handling.
Dave Airlie [Thu, 9 Jun 2016 02:32:09 +0000 (12:32 +1000)]
Merge tag 'drm-vc4-fixes-2016-06-06' of github.com:anholt/linux into drm-fixes
This pull request brings in vblank/pageflip fixes I had hoped to see
merged before 4.7rc1, plus two new fixes that have come in since then.
* tag 'drm-vc4-fixes-2016-06-06' of github.com:anholt/linux:
drm/vc4: Make pageflip completion handling more robust.
drm/vc4: Fix ioctl permissions for render nodes.
drm/vc4: Return -EBUSY if there's already a pending flip event.
drm/vc4: Fix drm_vblank_put/get imbalance in page flip path.
drm/vc4: Fix get_vblank_counter with proper no-op for Linux 4.4+
Dave Airlie [Thu, 9 Jun 2016 02:30:29 +0000 (12:30 +1000)]
Merge branch 'linux-4.7' of git://github.com/skeggsb/linux into drm-fixes
Fixes for two issues reported by KASAN, a display engine hang due to
incorrect BIOS table parsing, and incorrect LTC interrupt handling on
Maxwell which could lead to a never-ending interrupt storm.
* 'linux-4.7' of git://github.com/skeggsb/linux:
drm/nouveau/disp/sor/gm107: training pattern registers are like gm200
drm/nouveau/disp/sor/gf119: both links use the same training register
drm/nouveau/core: swap the order of imem/fb
drm/nouveau/fbcon: fix out-of-bounds memory accesses
drm/nouveau/gr/gf100-: update sm error decoding from gk20a nvgpu headers
drm/nouveau/ltc/gm107-: fix typo in the address of NV_PLTCG_LTC0_LTS0_INTR
drm/nouveau/bios/disp: fix handling of "match any protocol" entries
Stefan Agner [Fri, 3 Jun 2016 21:21:34 +0000 (14:21 -0700)]
drm/fsl-dcu: use flat regmap cache
Using flat regmap cache instead of RB-tree to avoid the following
lockdep warning on driver load:
WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:2755 lockdep_trace_alloc+0x15c/0x160()
DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags))
The RB-tree regmap cache needs to allocate new space on first
writes. However, allocations in an atomic context (e.g. when a
spinlock is held) are not allowed. The function regmap_write
calls map->lock, which acquires a spinlock in the fast_io case.
Since the FSL DCU driver uses MMIO, the regmap bus of type
regmap_mmio is being used which has fast_io set to true.
Use flat regmap cache and specify max register to be large
enouth to cover all registers available in LS1021a and Vybrids
register space.
Eric Dumazet [Wed, 8 Jun 2016 13:19:45 +0000 (06:19 -0700)]
net_sched: add missing paddattr description
"make htmldocs" complains otherwise:
.//net/core/gen_stats.c:65: warning: No description found for parameter 'padattr'
.//net/core/gen_stats.c:101: warning: No description found for parameter 'padattr'
Jakub Sitnicki [Wed, 8 Jun 2016 13:13:34 +0000 (15:13 +0200)]
ipv6: Skip XFRM lookup if dst_entry in socket cache is valid
At present we perform an xfrm_lookup() for each UDPv6 message we
send. The lookup involves querying the flow cache (flow_cache_lookup)
and, in case of a cache miss, creating an XFRM bundle.
If we miss the flow cache, we can end up creating a new bundle and
deriving the path MTU (xfrm_init_pmtu) from on an already transformed
dst_entry, which we pass from the socket cache (sk->sk_dst_cache) down
to xfrm_lookup(). This can happen only if we're caching the dst_entry
in the socket, that is when we're using a connected UDP socket.
To put it another way, the path MTU shrinks each time we miss the flow
cache, which later on leads to incorrectly fragmented payload. It can
be observed with ESPv6 in transport mode:
1) Set up a transformation and lower the MTU to trigger fragmentation
# ip xfrm policy add dir out src ::1 dst ::1 \
tmpl src ::1 dst ::1 proto esp spi 1
# ip xfrm state add src ::1 dst ::1 \
proto esp spi 1 enc 'aes' 0x0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b
# ip link set dev lo mtu 1500
2) Monitor the packet flow and set up an UDP sink
# tcpdump -ni lo -ttt &
# socat udp6-listen:12345,fork /dev/null &
4) Compare it to a non-connected socket
# perl -e 'print "@" x 1500' | socat - udp6-sendto:[::1]:12345
00:00:40.535488 IP6 ::1 > ::1: frag (0|1448) ESP(spi=0x00000001,seq=0x6), length 1448
00:00:00.000010 IP6 ::1 > ::1: frag (1448|64)
What happens in step (3) is:
1) when connecting the socket in __ip6_datagram_connect(), we
perform an XFRM lookup, miss the flow cache, create an XFRM
bundle, and cache the destination,
2) afterwards, when sending the datagram, we perform an XFRM lookup,
again, miss the flow cache (due to mismatch of flowi6_iif and
flowi6_oif, which is an issue of its own), and recreate an XFRM
bundle based on the cached (and already transformed) destination.
To prevent the recreation of an XFRM bundle, avoid an XFRM lookup
altogether whenever we already have a destination entry cached in the
socket. This prevents the path MTU shrinkage and brings us on par with
UDPv4.
The fix also benefits connected PINGv6 sockets, another user of
ip6_sk_dst_lookup_flow(), who also suffer messages being transformed
twice.
Guillaume Nault [Wed, 8 Jun 2016 10:59:17 +0000 (12:59 +0200)]
l2tp: fix configuration passed to setup_udp_tunnel_sock()
Unused fields of udp_cfg must be all zeros. Otherwise
setup_udp_tunnel_sock() fills ->gro_receive and ->gro_complete
callbacks with garbage, eventually resulting in panic when used by
udp_gro_receive().
v2: use empty initialiser instead of "{ NULL }" to avoid relying on
first field's type.
Fixes: 38fd2af24fcf ("udp: Add socket based GRO and config") Signed-off-by: Guillaume Nault <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Bob Liu [Tue, 31 May 2016 08:59:17 +0000 (16:59 +0800)]
xen-blkfront: fix resume issues after a migration
After a migrate to another host (which may not have multiqueue
support), the number of rings (block hardware queues)
may be changed and the ring info structure will also be reallocated.
This patch fixes two related bugs:
* call blk_mq_update_nr_hw_queues() to make blk-core know the number
of hardware queues have been changed.
* Don't store rinfo pointer to hctx->driver_data, because rinfo may be
reallocated so use hctx->queue_num to get the rinfo structure instead.
Bob Liu [Tue, 7 Jun 2016 14:43:15 +0000 (10:43 -0400)]
xen-blkfront: don't call talk_to_blkback when already connected to blkback
Sometimes blkfront may twice receive blkback_changed() notification
(XenbusStateConnected) after migration, which will cause
talk_to_blkback() to be called twice too and confuse xen-blkback.
The flow is as follow:
blkfront blkback
blkfront_resume()
> talk_to_blkback()
> Set blkfront to XenbusStateInitialised
front changed()
> Connect()
> Set blkback to XenbusStateConnected
blkback_changed()
> Skip talk_to_blkback()
because frontstate == XenbusStateInitialised
> blkfront_connect()
> Set blkfront to XenbusStateConnected
-----
And here we get another XenbusStateConnected notification leading
to:
-----
blkback_changed()
> because now frontstate != XenbusStateInitialised
talk_to_blkback() is also called again
> blkfront state changed from
XenbusStateConnected to XenbusStateInitialised
(Which is not correct!)
front_changed():
> Do nothing because blkback
already in XenbusStateConnected
Now blkback is in XenbusStateConnected but blkfront is still
in XenbusStateInitialised - leading to no disks.
Poking of the XenbusStateConnected state is allowed (to deal with
block disk change) and has to be dealt with. The most likely
cause of this bug are custom udev scripts hooking up the disks
and then validating the size.
Mel Gorman [Wed, 8 Jun 2016 13:25:22 +0000 (14:25 +0100)]
futex: Calculate the futex key based on a tail page for file-based futexes
Mike Galbraith reported that the LTP test case futex_wake04 was broken
by commit 65d8fc777f6d ("futex: Remove requirement for lock_page()
in get_futex_key()").
This test case uses futexes backed by hugetlbfs pages and so there is an
associated inode with a futex stored on such pages. The problem is that
the key is being calculated based on the head page index of the hugetlbfs
page and not the tail page.
Prior to the optimisation, the page lock was used to stabilise mappings and
pin the inode is file-backed which is overkill. If the page was a compound
page, the head page was automatically looked up as part of the page lock
operation but the tail page index was used to calculate the futex key.
After the optimisation, the compound head is looked up early and the page
lock is only relied upon to identify truncated pages, special pages or a
shmem page moving to swapcache. The head page is looked up because without
the page lock, special care has to be taken to pin the inode correctly.
However, the tail page is still required to calculate the futex key so
this patch records the tail page.
On vanilla 4.6, the output of the test case is;
futex_wake04 0 TINFO : Hugepagesize 2097152
futex_wake04 1 TFAIL : futex_wake04.c:126: Bug: wait_thread2 did not wake after 30 secs.
Josef Bacik [Wed, 8 Jun 2016 14:32:10 +0000 (10:32 -0400)]
nbd: pass the nbd pointer for flags debugfs
We were passing in &nbd for the private data in debugfs_create_file() for the
flags entry. We expect it to just be nbd, fix this so we get proper output from
this debugfs entry.
drivers/gpu/drm/vmwgfx/vmwgfx_msg.o: warning: objtool: vmw_send_msg()+0x107: duplicate frame pointer save
drivers/gpu/drm/vmwgfx/vmwgfx_msg.o: warning: objtool: vmw_host_get_guestinfo()+0x252: duplicate frame pointer save
To quote Linus:
"The reason is that VMW_PORT_HB_OUT() uses a magic instruction sequence
(a "rep outsb") to communicate with the hypervisor (it's a virtual GPU
driver for vmware), and %rbp is part of the communication. So the
inline asm does a save-and-restore of the frame pointer around the
instruction sequence.
I actually find the objtool warning to be quite reasonable, so it's
not exactly a false positive, since in this case it actually does
point out that the frame pointer won't be reliable over that
instruction sequence.
But in this particular case it just ends up being the wrong thing -
the code is what it is, and %rbp just can't have the frame information
due to annoying magic calling conventions."
Silence the warnings by telling objtool to ignore the two functions
which use the VMW_PORT_HB_{IN,OUT} macros.
Robin Murphy [Tue, 7 Jun 2016 17:44:48 +0000 (18:44 +0100)]
drivers: of: Fix of_pci.h header guard
The compilation of of_pci.c is governed by CONFIG_OF_PCI, but the
corresponding declarations in of_pci.h are inconsistently guarded by
CONFIG_OF, with the result that if CONFIG_PCI is disabled for an OF
platform, the dangling external declarations are still active and the
inline stub definitions not. So far this has managed to go unnoticed
since it happens that the only references to these functions are from
code which itself depends on CONFIG_PCI or CONFIG_OF_PCI.
Fix this with the appropriate config guard so that any new callers
outside PCI-specific code don't start unexpectedly breaking under
certain configs.
The problem is that it tries to update the 'sched_schedstats' static key
before jump labels have been initialized.
Changing jump_label_init() to be called earlier before
parse_early_param() wouldn't fix it: it would still fail trying to
poke_text() because mm isn't yet initialized.
Instead, just create a temporary '__sched_schedstats' variable which can
be copied to the static key later during sched_init() after jump labels
have been initialized.
Josh Poimboeuf [Fri, 3 Jun 2016 22:58:40 +0000 (17:58 -0500)]
sched/debug: Fix /proc/sched_debug regression
Commit:
cb2517653fcc ("sched/debug: Make schedstats a runtime tunable that is disabled by default")
... introduced a bug when CONFIG_SCHEDSTATS is enabled and the
runtime tunable is disabled (which is the default).
The wait-time, sum-exec, and sum-sleep fields are missing from the
/proc/sched_debug file in the runnable_tasks section.
Fix it with a new schedstat_val() macro which returns the field value
when schedstats is enabled and zero otherwise. The macro works with
both SCHEDSTATS and !SCHEDSTATS. I put the macro in stats.h since it
might end up being useful in other places.
There is no way to end up in _free_event() with event::pmu being NULL.
The latter is initialized in event allocation path and remains set
forever. In case of allocation failure, the error path doesn't use
_free_event().
Having the check, however, suggests that it is possible to have a
event::pmu==NULL situation in _free_event() and confuses the robots.
Peter Zijlstra [Wed, 8 Jun 2016 08:19:51 +0000 (10:19 +0200)]
locking/qspinlock: Fix spin_unlock_wait() some more
While this prior commit:
54cf809b9512 ("locking,qspinlock: Fix spin_is_locked() and spin_unlock_wait()")
... fixes spin_is_locked() and spin_unlock_wait() for the usage
in ipc/sem and netfilter, it does not in fact work right for the
usage in task_work and futex.
So while the 2 locks crossed problem:
spin_lock(A) spin_lock(B)
if (!spin_is_locked(B)) spin_unlock_wait(A)
foo() foo();
... works with the smp_mb() injected by both spin_is_locked() and
spin_unlock_wait(), this is not sufficient for:
flag = 1;
smp_mb(); spin_lock()
spin_unlock_wait() if (!flag)
// add to lockless list
// iterate lockless list
... because in this scenario, the store from spin_lock() can be delayed
past the load of flag, uncrossing the variables and loosing the
guarantee.
This patch reworks spin_is_locked() and spin_unlock_wait() to work in
both cases by exploiting the observation that while the lock byte
store can be delayed, the contender must have registered itself
visibly in other state contained in the word.
It also allows for architectures to override both functions, as PPC
and ARM64 have an additional issue for which we currently have no
generic solution.
The bcm_kona_gpio_reset() calls bcm_kona_gpio_write_lock_regs()
with what looks like the wrong parameter. The write_lock_regs
function takes a pointer to the registers, not the bcm_kona_gpio
structure.
Fix the warning, and probably bug by changing the function to
pass reg_base instead of kona_gpio, fixing the following warning:
drivers/gpio/gpio-bcm-kona.c:550:47: warning: incorrect type in argument 1
(different address spaces)
expected void [noderef] <asn:2>*reg_base
got struct bcm_kona_gpio *kona_gpio
warning: incorrect type in argument 1 (different address spaces)
expected void [noderef] <asn:2>*reg_base
got struct bcm_kona_gpio *kona_gpio
Borislav Petkov [Wed, 1 Jun 2016 10:04:28 +0000 (12:04 +0200)]
x86/cpu/AMD: Extend X86_FEATURE_TOPOEXT workaround to newer models
We need to reenable the topology extensions CPUID leafs on newer models
too, if BIOS has disabled them, as we rely on them to get proper compute
unit topology.
Dave Hansen [Fri, 3 Jun 2016 00:19:27 +0000 (17:19 -0700)]
x86/cpu/intel: Introduce macros for Intel family numbers
Problem:
We have a boatload of open-coded family-6 model numbers. Half of
them have these model numbers in hex and the other half in
decimal. This makes grepping for them tons of fun, if you were
to try.
Solution:
Consolidate all the magic numbers. Put all the definitions in
one header.
The names here are closely derived from the comments describing
the models from arch/x86/events/intel/core.c. We could easily
make them shorter by doing things like s/SANDYBRIDGE/SNB/, but
they seemed fine even with the longer versions to me.
Do not take any of these names too literally, like "DESKTOP"
or "MOBILE". These are all colloquial names and not precise
descriptions of everywhere a given model will show up.
Will Deacon [Tue, 7 Jun 2016 16:55:15 +0000 (17:55 +0100)]
arm64: mm: always take dirty state from new pte in ptep_set_access_flags
Commit 66dbd6e61a52 ("arm64: Implement ptep_set_access_flags() for
hardware AF/DBM") ensured that pte flags are updated atomically in the
face of potential concurrent, hardware-assisted updates. However, Alex
reports that:
| This patch breaks swapping for me.
| In the broken case, you'll see either systemd cpu time spike (because
| it's stuck in a page fault loop) or the system hang (because the
| application owning the screen is stuck in a page fault loop).
It turns out that this is because the 'dirty' argument to
ptep_set_access_flags is always 0 for read faults, and so we can't use
it to set PTE_RDONLY. The failing sequence is:
1. We put down a PTE_WRITE | PTE_DIRTY | PTE_AF pte
2. Memory pressure -> pte_mkold(pte) -> clear PTE_AF
3. A read faults due to the missing access flag
4. ptep_set_access_flags is called with dirty = 0, due to the read fault
5. pte is then made PTE_WRITE | PTE_DIRTY | PTE_AF | PTE_RDONLY (!)
6. A write faults, but pte_write is true so we get stuck
The solution is to check the new page table entry (as would be done by
the generic, non-atomic definition of ptep_set_access_flags that just
calls set_pte_at) to establish the dirty state.
Linus Walleij [Wed, 8 Jun 2016 08:58:20 +0000 (10:58 +0200)]
gpio: include <linux/io-mapping.h> in gpiolib-of
When enabling the gpiolib for all archs a build robot came
up with this:
All errors (new ones prefixed by >>):
drivers/gpio/gpiolib-of.c: In function 'of_mm_gpiochip_add_data':
>> drivers/gpio/gpiolib-of.c:317:2: error: implicit declaration of
function 'iounmap' [-Werror=implicit-function-declaration]
iounmap(mm_gc->regs);
^~~~~~~
cc1: some warnings being treated as errors
Fix this by including <linux/io-mapping.h> explicitly.
Fixes: 296ad4acb8ef ("gpio: remove deps on ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB") Reported-by: kbuild test robot <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
gpiolib relies on the reference counters to clean up the gpio_device
structure.
Although the number of get/put is properly aligned on gpiolib.c
itself, it does not take into consideration how the referece counters
are affected by other external functions such as cdev_add and device_add.
Because of this, after the last call to put_device, the reference counter
has a value of +3, therefore never calling gpiodevice_release.
Due to the fact that some of the device has already been cleaned on
gpiochip_remove, the library will end up OOPsing the kernel (e.g. a call
to of_gpiochip_find_and_xlate).
Helmut Grohne [Fri, 3 Jun 2016 12:15:32 +0000 (14:15 +0200)]
gpio: zynq: initialize clock even without CONFIG_PM
When the PM initialization was moved in the commit referenced below, the
code enabling the clock was removed from the probe function. On
CONFIG_PM=y kernels, this is not a problem as the pm resume hook enables
the clock, but when power management is disabled, all those pm_*
functions are noops and the clock is never enabled resulting in a
dysfunctional gpio controller.
Put the clock initialization back to support CONFIG_PM=n.
Cc: [email protected] Signed-off-by: Helmut Grohne <[email protected]> Fixes: 3773c195d387 ("gpio: zynq: Do PM initialization earlier to support gpio hogs") Signed-off-by: Linus Walleij <[email protected]>
gpio: 104-dio-48e: Fix control port offset computation off-by-one error
There are only two control ports, each controlling three distinct I/O
ports. To compute the control port address offset for a respective I/O
port, the I/O port address offset should be divided by 3; dividing by 2
may result in not only the wrong address offset but possibly also an
out-of-bounds array memory access for a non-existent third control port.
Fixes: 1b06d64f7374 ("gpio: Add GPIO support for the ACCES 104-DIO-48E") Signed-off-by: William Breathitt Gray <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
Ben Dooks [Tue, 7 Jun 2016 18:27:51 +0000 (19:27 +0100)]
net-sysfs: fix missing <linux/of_net.h>
The of_find_net_device_by_node() function is defined in
<linux/of_net.h> but not included in the .c file that
implements it. Fix the following warning by including the
header:
net/core/net-sysfs.c:1494:19: warning: symbol 'of_find_net_device_by_node' was not declared. Should it be static?
Toshiaki Makita [Tue, 7 Jun 2016 10:14:17 +0000 (19:14 +0900)]
bridge: Don't insert unnecessary local fdb entry on changing mac address
The missing br_vlan_should_use() test caused creation of an unneeded
local fdb entry on changing mac address of a bridge device when there is
a vlan which is configured on a bridge port but not on the bridge
device.
Fixes: 2594e9064a57 ("bridge: vlan: add per-vlan struct and move to rhashtables") Signed-off-by: Toshiaki Makita <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
powerpc/mm/radix: Fix always false comparison against MMU_NO_CONTEXT
In some of the radix TLB flush routines, we use a local to store the
mm->context.id, AKA the PID.
Currently we use an int, but the PID is unsigned long, so large values
of PID will be truncated. In particular MMU_NO_CONTEXT is -1, which
means all our comparisons against that value can never be true.
This means we'll issue TLB flushes when we shouldn't on radix enabled
machines.
Fix it by using an unsigned long for the local. Discovered by Coverity.
Linus Torvalds [Wed, 8 Jun 2016 03:41:36 +0000 (20:41 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
"Fixes for crap of assorted ages: EOPENSTALE one is 4.2+, autofs one is
4.6, d_walk - 3.2+.
The atomic_open() and coredump ones are regressions from this window"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
coredump: fix dumping through pipes
fix a regression in atomic_open()
fix d_walk()/non-delayed __d_free() race
autofs braino fix for do_last()
fix EOPENSTALE bug in do_last()
Al Viro [Wed, 8 Jun 2016 01:53:51 +0000 (21:53 -0400)]
fix a regression in atomic_open()
open("/foo/no_such_file", O_RDONLY | O_CREAT) on should fail with
EACCES when /foo is not writable; failing with ENOENT is obviously
wrong. That got broken by a braino introduced when moving the
creat_error logics from atomic_open() to lookup_open(). Easy to
fix, fortunately.
Al Viro [Wed, 8 Jun 2016 01:26:55 +0000 (21:26 -0400)]
fix d_walk()/non-delayed __d_free() race
Ascend-to-parent logics in d_walk() depends on all encountered child
dentries not getting freed without an RCU delay. Unfortunately, in
quite a few cases it is not true, with hard-to-hit oopsable race as
the result.
Fortunately, the fix is simiple; right now the rule is "if it ever
been hashed, freeing must be delayed" and changing it to "if it
ever had a parent, freeing must be delayed" closes that hole and
covers all cases the old rule used to cover. Moreover, pipes and
sockets remain _not_ covered, so we do not introduce RCU delay in
the cases which are the reason for having that delay conditional
in the first place.
cpufreq: intel_pstate: Fix ->set_policy() interface for no_turbo
When turbo is disabled, the ->set_policy() interface is broken.
For example, when turbo is disabled and cpuinfo.max = 2900000 (full
max turbo frequency), setting the limits results in frequency less
than the requested one:
Set 1000000 KHz results in 0700000 KHz
Set 1500000 KHz results in 1100000 KHz
Set 2000000 KHz results in 1500000 KHz
This is because the limits->max_perf fraction is calculated using
the max turbo frequency as the reference, but when the max P-State is
capped in intel_pstate_get_min_max(), the reference is not the max
turbo P-State. This results in reducing max P-State.
One option is to always use max turbo as reference for calculating
limits. But this will not be correct. By definition the intel_pstate
sysfs limits, shows percentage of available performance. So when
BIOS has disabled turbo, the available performance is max non turbo.
So the max_perf_pct should still show 100%.
Signed-off-by: Srinivas Pandruvada <[email protected]>
[ rjw : Subject & changelog, rewrite in fewer lines of code ] Cc: All applicable <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
Wolfram Sang [Mon, 6 Jun 2016 16:48:38 +0000 (18:48 +0200)]
of: fix autoloading due to broken modalias with no 'compatible'
Because of an improper dereference, a stray 'C' character was output to
the modalias when no 'compatible' was specified. This is the case for
some old PowerMac drivers which only set the 'name' property. Fix it to
let them match again.
powerpc/pseries: Fix IBM_ARCH_VEC_NRCORES_OFFSET since POWER8NVL was added
The recent commit 7cc851039d64 ("powerpc/pseries: Add POWER8NVL support
to ibm,client-architecture-support call") added a new PVR mask & value
to the start of the ibm_architecture_vec[] array.
However it missed the fact that further down in the array, we hard code
the offset of one of the fields, and then at boot use that value to
patch the value in the array. This means every update to the array must
also update the #define, ugh.
This means that on pseries machines we will misreport to firmware the
number of cores we support, by a factor of threads_per_core.
Fix it for now by updating the #define.
Fixes: 7cc851039d64 ("powerpc/pseries: Add POWER8NVL support to ibm,client-architecture-support call") Cc: [email protected] # v4.0+ Signed-off-by: Michael Ellerman <[email protected]>
The following patchset contains two Netfilter/IPVS fixes for your net
tree, they are:
1) Fix missing alignment in next offset calculation for standard
targets, introduced in the previous merge window, patch from
Florian Westphal.
2) Fix to correct the handling of outgoing connections which use the
SIP-pe such that the binding of a real-server is updated when needed.
This was an omission from changes introduced by Marco Angaroni in
the previous merge window too, to allow handling of outgoing
connections by the SIP-pe. Patch and report came via Simon Horman.
====================
Daniel Borkmann [Mon, 6 Jun 2016 20:50:39 +0000 (22:50 +0200)]
net: sched: fix tc_should_offload for specific clsact classes
When offloading classifiers such as u32 or flower to hardware, and the
qdisc is clsact (TC_H_CLSACT), then we need to differentiate its classes,
since not all of them handle ingress, therefore we must leave those in
software path. Add a .tcf_cl_offload() callback, so we can generically
handle them, tested on ixgbe.
Fixes: 10cbc6843446 ("net/sched: cls_flower: Hardware offloaded filters statistics support") Fixes: 5b33f48842fa ("net/flower: Introduce hardware offload support") Fixes: a1b7c5fd7fe9 ("net: sched: add cls_u32 offload hooks for netdevs") Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: John Fastabend <[email protected]> Signed-off-by: David S. Miller <[email protected]>
WANG Cong [Mon, 6 Jun 2016 16:54:30 +0000 (09:54 -0700)]
act_police: fix a crash during removal
The police action is using its own code to initialize tcf hash
info, which makes us to forgot to initialize a->hinfo correctly.
Fix this by calling the helper function tcf_hash_create() directly.
Fixes: ddf97ccdd7cb ("net_sched: add network namespace support for tc actions") Cc: Jamal Hadi Salim <[email protected]> Signed-off-by: Cong Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
projects / linux.git / log