Amlogic sound cards do create a lot of pcm interfaces, possibly more than
8. Some pcm interfaces are internal (like DPCM backends and c2c) and not
exposed to userspace.
Those interfaces still increase the number passed to snd_find_free_minor(),
which eventually exceeds 8 causing -EBUSY error on card registration if
CONFIG_SND_DYNAMIC_MINORS=n and the interface is exposed to userspace.
select CONFIG_SND_DYNAMIC_MINORS for Amlogic cards to avoid the problem.
Simon Trimmer [Mon, 22 Apr 2024 10:32:11 +0000 (11:32 +0100)]
ASoC: cs35l56: Avoid static analysis warning of uninitialised variable
Static checkers complain that the silicon_uid variable passed by
pointer to cs35l56_read_silicon_uid() could later be used
uninitialised when calling cs_amp_get_efi_calibration_data().
cs35l56_read_silicon_uid() must have succeeded to call
cs_amp_get_efi_calibration_data() and that would have populated the
variable.
However, initialise the value so we are not haunted by it forevermore.
ASoC: ti: davinci-mcasp: Fix race condition during probe
When using davinci-mcasp as CPU DAI with simple-card, there are some
conditions that cause simple-card to finish registering a sound card before
davinci-mcasp finishes registering all sound components. This creates a
non-working sound card from userspace with no problem indication apart
from not being able to play/record audio on a PCM stream. The issue
arises during simultaneous probe execution of both drivers. Specifically,
the simple-card driver, awaiting a CPU DAI, proceeds as soon as
davinci-mcasp registers its DAI. However, this process can lead to the
client mutex lock (client_mutex in soc-core.c) being held or davinci-mcasp
being preempted before PCM DMA registration on davinci-mcasp finishes.
This situation occurs when the probes of both drivers run concurrently.
Below is the code path for this condition. To solve the issue, defer
davinci-mcasp CPU DAI registration to the last step in the audio part of
it. This way, simple-card CPU DAI parsing will be deferred until all
audio components are registered.
Fail Code Path:
simple-card.c: probe starts
simple-card.c: simple_dai_link_of: simple_parse_node(..,cpu,..) returns EPROBE_DEFER, no CPU DAI yet
davinci-mcasp.c: probe starts
davinci-mcasp.c: devm_snd_soc_register_component() register CPU DAI
simple-card.c: probes again, finish CPU DAI parsing and call devm_snd_soc_register_card()
simple-card.c: finish probe
davinci-mcasp.c: *dma_pcm_platform_register() register PCM DMA
davinci-mcasp.c: probe finish
ASoC: Intel: avs: Set name of control as in topology
When creating controls attached to widgets, there are a lot of rules if
they get their name prefixed with widget name or not. Due to that
controls ended up with weirdly looking names like "ssp0_fe DSP Volume",
while topology set it to "DSP Volume".
Fix this by setting no_wname_in_kcontrol_name to true in avs topology
widgets which disables unwanted behaviour.
Peter Ujfalusi [Wed, 17 Apr 2024 07:58:04 +0000 (10:58 +0300)]
ASoC: SOF: Core: Handle error returned by sof_select_ipc_and_paths
The patch which fixed the missing remove_late() calls missed a case
when sof_select_ipc_and_paths() could return with error and in this
case sof_init_environment() would just return with 0.
Do not ignore the error code returned by sof_select_ipc_and_paths().
Stefan Binding [Thu, 11 Apr 2024 14:26:48 +0000 (15:26 +0100)]
ASoC: cs35l41: Update DSP1RX5/6 Sources for DSP config
Currently, all ASoC systems are set to use VPMON for DSP1RX5_SRC,
however, this is required only for internal boost systems.
External boost systems require VBSTMON instead of VPMON to be the
input to DSP1RX5_SRC.
Shared Boost Active acts like Internal boost (requires VPMON).
Shared Boost Passive acts like External boost (requires VBSTMON)
All systems require DSP1RX6_SRC to be set to VBSTMON.
This chain fixes some problems with some previous patches for handling
the ASP1 config registers. The root of the problem is that the ownership
of these registers can be either with the firmware or the driver, and that
the chip has to be soft-reset after downloading the firmware.
This chain adds and uses a regmap_read_bypassed() function so that the
driver can leave the regmap in cache-only until the chip has rebooted,
but still poll a register to detect when the chip has rebooted.
Richard Fitzgerald (4):
regmap: Add regmap_read_bypassed()
ALSA: hda: cs35l56: Exit cache-only after
cs35l56_wait_for_firmware_boot()
ASoC: cs35l56: Fix unintended bus access while resetting amp
ASoC: cs35l56: Prevent overwriting firmware ASP config
Background:
Pulseaudio and Pipewire on startup opens all available streams and
closes them without triggering a start (after probing it's capabilities).
We somehow missed the default path for DSP libraries for LNL, and need
to restrict support for D0i3 w/ IPC4. Also add debugfs support for
firmware profile information so that sof-test scripts can show what is
being tested.
ASoC: rt5645: Fix the electric noise due to the CBJ contacts floating
The codec leaves tie combo jack's sleeve/ring2 to floating status
default. It would cause electric noise while connecting the active
speaker jack during boot or shutdown.
This patch requests a gpio to control the additional jack circuit
to tie the contacts to the ground or floating.
ASoC: SOF: debug: show firmware/topology prefix/names
The SOF driver has multiple profiles to select firmware/topology
prefix/names depending on the platform and ipc_type, and each of those
fields can be overridden with kernel parameters. This results in some
cases in confusion on what configuration is actually used in a given
test.
We currently log the firmware and topology names in the kernel logs,
but there's been an ask to add the information in debugfs to simplify
test scripts used by developers and CI.
This isn't meant to be a stable ABI used by apps, changes will be
allowed as needed.
ASoC: SOF: pcm: Restrict DSP D0i3 during S0ix to IPC3
Introduce a new field in struct sof_ipc_pcm_ops that can be used to
restrict DSP D0i3 during S0ix suspend to IPC3. With IPC4, all streams
must be stopped before S0ix suspend.
ASoC: SOF: Intel: add default firmware library path for LNL
The commit cd6f2a2e6346 ("ASoC: SOF: Intel: Set the default firmware
library path for IPC4") added the default_lib_path field for all
platforms, but this was missed when LunarLake was later introduced.
Peter Ujfalusi [Tue, 9 Apr 2024 11:00:36 +0000 (14:00 +0300)]
ASoC: SOF: ipc4-pcm: Do not reset the ChainDMA if it has not been allocated
The ChainDMA operation differs from normal pipelines that it is only
created when the stream started, in fact a PCM using ChainDMA has no
pipelines, modules.
To reset a ChainDMA, it needs to be first allocated in firmware. When
PulseAudio/PipeWire starts, they will probe the PCMs by opening them, check
hw_params and then close the PCM without starting audio.
Unconditionally resetting the ChainDMA can result the following error:
Add a new chain_dma_allocated flag to sof_ipc4_pcm_stream_priv to store the
ChainDMA allocation state and use this flag to skip sending the reset if
the ChainDMA is not allocated.
Using the sof_ipc4_timestamp_info struct directly as sps->private data
is too restrictive, add a new generic sof_ipc4_pcm_stream_priv struct
containing the time_info to allow new information to be stored in a
generic way.
ASoC: cs35l56: Prevent overwriting firmware ASP config
Only populate the ASP1 config registers in the regmap cache if the
ASP DAI is used. This prevents regcache_sync() from overwriting
these registers with their defaults when the firmware owns
control of these registers.
On a SoundWire system the ASP could be owned by the firmware to
share reference audio with the firmware on other cs35l56. Or it
can be used as a normal codec-codec interface owned by the driver.
The driver must not overwrite the registers if the firmware has
control of them.
The original implementation for this in commit 07f7d6e7a124
("ASoC: cs35l56: Fix for initializing ASP1 mixer registers") was
to still provide defaults for these registers, assuming that if
they were never reconfigured from defaults then regcache_sync()
would not write them out because they are not dirty. Unfortunately
regcache_sync() is not that smart. If the chip has not reset (so
the driver has not called regcache_mark_dirty()) a regcache_sync()
could write out registers that are not dirty.
To avoid accidental overwriting of the ASP registers, they are
removed from the table of defaults and instead are populated with
defaults only if one of the ASP DAI configuration functions is
called. So if the DAI has never been configured, the firmware is
assumed to have ownership of these registers, and the regmap cache
will not contain any entries for them.
ASoC: cs35l56: Fix unintended bus access while resetting amp
Use the new regmap_read_bypassed() so that the regmap can be left
in cache-only mode while it is booting, but the driver can still
read boot-status and chip-id information during this time.
This fixes race conditions where some writes could be issued to the
silicon while it is still rebooting, before the driver has determined
that the boot is complete.
This is typically prevented by putting regmap into cache-only until the
hardware is ready. But this assumes that the driver does not need to
access device registers to determine when it is "ready". For cs35l56
this involves polling a register and the original implementation relied
on having special handlers to block racing callbacks until dsp_work()
is complete. However, some cases were missed, most notably the ASP DAI
functions.
The regmap_read_bypassed() function allows the fix for this to be
simplified to putting regmap into cache-only during the reset. The
initial boot stages (poll HALO_STATE and read the chip ID) are all done
bypassed. Only when the amp is seen to be booted is the cache-only
revoked.
Changes are:
- cs35l56_system_reset() now leaves the regmap in cache-only status.
- cs35l56_wait_for_firmware_boot() polls using regmap_read_bypassed().
- cs35l56_init() revokes cache-only either via cs35l56_hw_init() or
when firmware has rebooted after a soft reset.
- cs35l56_hw_init() exits cache-only after it has determined that the
amp has booted.
- cs35l56_sdw_init() doesn't disable cache-only, since this must be
deferred to cs35l56_init().
- cs35l56_runtime_resume_common() waits for firmware boot before exiting
cache-only.
These changes cover three situations where the registers are not
accessible:
1) SoundWire first-time enumeration. The regmap is kept in cache-only
until the chip is fully booted. The original code had to exit
cache-only to read chip status in cs35l56_init() and cs35l56_hw_init()
but this is now deferred to after the firmware has rebooted.
In this case cs35l56_sdw_probe() leaves regmap in cache-only
(unchanged behaviour) and cs35l56_hw_init() exits cache-only after the
firmware is booted and the chip identified.
2) Soft reset during first-time initialization. cs35l56_init() calls
cs35l56_system_reset(), which puts regmap into cache-only.
On I2C/SPI cs35l56_init() then flows through to call
cs35l56_wait_for_firmware_boot() and exit cache-only. On SoundWire
the re-enumeration will enter cs35l56_init() again, which then drops
down to call cs35l56_wait_for_firmware_boot() and exit cache-only.
3) Soft reset after firmware download. dsp_work() calls
cs35l56_system_reset(), which puts regmap into cache-only. After this
the flow is the same as (2).
ALSA: hda: cs35l56: Exit cache-only after cs35l56_wait_for_firmware_boot()
Adds calls to disable regmap cache-only after a successful return from
cs35l56_wait_for_firmware_boot().
This is to prepare for a change in the shared ASoC module that will
leave regmap in cache-only mode after cs35l56_system_reset(). This is
to prevent register accesses going to the hardware while it is
rebooting.
Add a regmap_read_bypassed() to allow reads from the hardware registers
while the regmap is in cache-only mode.
A typical use for this is to keep the cache in cache-only mode until
the hardware has reached a valid state, but one or more status registers
must be polled to determine when this state is reached.
For example, firmware download on the cs35l56 can take several seconds if
there are multiple amps sharing limited bus bandwidth. This is too long
to block in probe() so it is done as a background task. The device must
be soft-reset to reboot the firmware and during this time the registers are
not accessible, so the cache should be in cache-only. But the driver must
poll a register to detect when reboot has completed.
Hans de Goede [Sun, 7 Apr 2024 19:15:59 +0000 (21:15 +0200)]
ASoC: Intel: bytcr_rt5640: Apply Asus T100TA quirk to Asus T100TAM too
The Asus T100TA quirk has been using an exact match on a product-name of
"T100TA" but there are also T100TAM variants with a slightly higher
clocked CPU and a metal backside which need the same quirk.
Sort the existing T100TA (stereo speakers) below the more specific
T100TAF (mono speaker) quirk and switch from exact matching to
substring matching so that the T100TA quirk will also match on
the T100TAM models.
DSPK configuration is wrong for 16-bit playback and this happens because
the client config is always fixed at 24-bit in hw_params(). Fix this by
updating the client config to 16-bit for the respective playback.
Recent changes addressed PAGE_SIZE ambiguity in 2/3 locations for struct
avs_icl_memwnd2. The unaddressed one causes build errors when
PAGE_SIZE != SZ_4K.
Merge tag 'x86-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix MCE timer reinit locking
- Fix/improve CoCo guest random entropy pool init
- Fix SEV-SNP late disable bugs
- Fix false positive objtool build warning
- Fix header dependency bug
- Fix resctrl CPU offlining bug
* tag 'x86-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/retpoline: Add NOENDBR annotation to the SRSO dummy return thunk
x86/mce: Make sure to grab mce_sysfs_mutex in set_bank()
x86/CPU/AMD: Track SNP host status with cc_platform_*()
x86/cc: Add cc_platform_set/_clear() helpers
x86/kvm/Kconfig: Have KVM_AMD_SEV select ARCH_HAS_CC_PLATFORM
x86/coco: Require seeding RNG with RDRAND on CoCo systems
x86/numa/32: Include missing <asm/pgtable_areas.h>
x86/resctrl: Fix uninitialized memory read when last CPU of domain goes offline
Merge tag 'timers-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
"Fix various timer bugs:
- Fix a timer migration bug that may result in missed events
- Fix timer migration group hierarchy event updates
- Fix a PowerPC64 build warning
- Fix a handful of DocBook annotation bugs"
* tag 'timers-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers/migration: Return early on deactivation
timers/migration: Fix ignored event due to missing CPU update
vdso: Use CONFIG_PAGE_SHIFT in vdso/datapage.h
timers: Fix text inconsistencies and spelling
tick/sched: Fix struct tick_sched doc warnings
tick/sched: Fix various kernel-doc warnings
timers: Fix kernel-doc format and add Return values
time/timekeeping: Fix kernel-doc warnings and typos
time/timecounter: Fix inline documentation
Merge tag 'perf-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fix from Ingo Molnar:
"Fix a combined PEBS events bug on x86 Intel CPUs"
* tag 'perf-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/ds: Don't clear ->pebs_data_cfg for the last PEBS event
Merge tag 'nfsd-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Address a slow memory leak with RPC-over-TCP
- Prevent another NFS4ERR_DELAY loop during CREATE_SESSION
* tag 'nfsd-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: hold a lighter-weight client reference over CB_RECALL_ANY
SUNRPC: Fix a slow server-side memory leak with RPC-over-TCP
Merge tag '6.9-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- fix to retry close to avoid potential handle leaks when server
returns EBUSY
- DFS fixes including a fix for potential use after free
- fscache fix
- minor strncpy cleanup
- reconnect race fix
- deal with various possible UAF race conditions tearing sessions down
* tag '6.9-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix potential UAF in cifs_signal_cifsd_for_reconnect()
smb: client: fix potential UAF in smb2_is_network_name_deleted()
smb: client: fix potential UAF in is_valid_oplock_break()
smb: client: fix potential UAF in smb2_is_valid_oplock_break()
smb: client: fix potential UAF in smb2_is_valid_lease_break()
smb: client: fix potential UAF in cifs_stats_proc_show()
smb: client: fix potential UAF in cifs_stats_proc_write()
smb: client: fix potential UAF in cifs_dump_full_key()
smb: client: fix potential UAF in cifs_debug_files_proc_show()
smb3: retrying on failed server close
smb: client: serialise cifs_construct_tcon() with cifs_mount_mutex
smb: client: handle DFS tcons in cifs_construct_tcon()
smb: client: refresh referral without acquiring refpath_lock
smb: client: guarantee refcounted children from parent session
cifs: Fix caching to try to do open O_WRONLY as rdwr on server
smb: client: fix UAF in smb2_reconnect_server()
smb: client: replace deprecated strncpy with strscpy
x86/retpoline: Add NOENDBR annotation to the SRSO dummy return thunk
srso_alias_untrain_ret() is special code, even if it is a dummy
which is called in the !SRSO case, so annotate it like its real
counterpart, to address the following objtool splat:
vmlinux.o: warning: objtool: .export_symbol+0x2b290: data relocation to !ENDBR: srso_alias_untrain_ret+0x0
Merge tag 'firewire-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fixes from Takashi Sakamoto:
"The firewire-ohci kernel module has a parameter for verbose kernel
logging. It is well-known that it logs the spurious IRQ for bus-reset
event due to the unmasked register for IRQ event. This update fixes
the issue"
* tag 'firewire-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: ohci: mask bus reset interrupts between ISR and bottom half
Adam Goldman [Sun, 24 Mar 2024 22:38:41 +0000 (07:38 +0900)]
firewire: ohci: mask bus reset interrupts between ISR and bottom half
In the FireWire OHCI interrupt handler, if a bus reset interrupt has
occurred, mask bus reset interrupts until bus_reset_work has serviced and
cleared the interrupt.
Normally, we always leave bus reset interrupts masked. We infer the bus
reset from the self-ID interrupt that happens shortly thereafter. A
scenario where we unmask bus reset interrupts was introduced in 2008 in a007bb857e0b26f5d8b73c2ff90782d9c0972620: If
OHCI_PARAM_DEBUG_BUSRESETS (8) is set in the debug parameter bitmask, we
will unmask bus reset interrupts so we can log them.
irq_handler logs the bus reset interrupt. However, we can't clear the bus
reset event flag in irq_handler, because we won't service the event until
later. irq_handler exits with the event flag still set. If the
corresponding interrupt is still unmasked, the first bus reset will
usually freeze the system due to irq_handler being called again each
time it exits. This freeze can be reproduced by loading firewire_ohci
with "modprobe firewire_ohci debug=-1" (to enable all debugging output).
Apparently there are also some cases where bus_reset_work will get called
soon enough to clear the event, and operation will continue normally.
This freeze was first reported a few months after a007bb85 was committed,
but until now it was never fixed. The debug level could safely be set
to -1 through sysfs after the module was loaded, but this would be
ineffectual in logging bus reset interrupts since they were only
unmasked during initialization.
irq_handler will now leave the event flag set but mask bus reset
interrupts, so irq_handler won't be called again and there will be no
freeze. If OHCI_PARAM_DEBUG_BUSRESETS is enabled, bus_reset_work will
unmask the interrupt after servicing the event, so future interrupts
will be caught as desired.
As a side effect to this change, OHCI_PARAM_DEBUG_BUSRESETS can now be
enabled through sysfs in addition to during initial module loading.
However, when enabled through sysfs, logging of bus reset interrupts will
be effective only starting with the second bus reset, after
bus_reset_work has executed.
Merge tag 'spi-fix-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few small driver specific fixes, the most important being the
s3c64xx change which is likely to be hit during normal operation"
* tag 'spi-fix-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: mchp-pci1xxx: Fix a possible null pointer dereference in pci1xxx_spi_probe
spi: spi-fsl-lpspi: remove redundant spi_controller_put call
spi: s3c64xx: Use DMA mode from fifo size
Merge tag 'regmap-fix-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"Richard found a nasty corner case in the maple tree code which he
fixed, and also fixed a compiler warning which was showing up with the
toolchain he uses and helpfully identified a possible incorrect error
code which could have runtime impacts"
* tag 'regmap-fix-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: maple: Fix uninitialized symbol 'ret' warnings
regmap: maple: Fix cache corruption in regcache_maple_drop()
* tag 'block-6.9-20240405' of git://git.kernel.dk/linux:
nvme-fc: rename free_ctrl callback to match name pattern
nvmet-fc: move RCU read lock to nvmet_fc_assoc_exists
nvmet: implement unique discovery NQN
nvme: don't create a multipath node for zero capacity devices
nvme: split nvme_update_zone_info
nvme-multipath: don't inherit LBA-related fields for the multipath node
block: fix overflow in blk_ioctl_discard()
nullblk: Fix cleanup order in null_add_dev() error path
Merge tag 'io_uring-6.9-20240405' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Backport of some fixes that came up during development of the 6.10
io_uring patches. This includes some kbuf cleanups and reference
fixes.
- Disable multishot read if we don't have NOWAIT support on the target
- Fix for a dependency issue with workqueue flushing
* tag 'io_uring-6.9-20240405' of git://git.kernel.dk/linux:
io_uring/kbuf: hold io_buffer_list reference over mmap
io_uring/kbuf: protect io_buffer_list teardown with a reference
io_uring/kbuf: get rid of bl->is_ready
io_uring/kbuf: get rid of lower BGID lists
io_uring: use private workqueue for exit work
io_uring: disable io-wq execution of multishot NOWAIT requests
io_uring/rw: don't allow multishot reads without NOWAIT support
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The most important is the libsas fix, which is a problem for DMA to a
kmalloc'd structure too small causing cache line interference. The
other fixes (all in drivers) are mostly for allocation length fixes,
error leg unwinding, suspend races and a missing retry"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Fix MCQ mode dev command timeout
scsi: libsas: Align SMP request allocation to ARCH_DMA_MINALIGN
scsi: sd: Unregister device if device_add_disk() failed in sd_probe()
scsi: ufs: core: WLUN suspend dev/link state error recovery
scsi: mylex: Fix sysfs buffer lengths
Merge tag 'mm-hotfixes-stable-2024-04-05-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"8 hotfixes, 3 are cc:stable
There are a couple of fixups for this cycle's vmalloc changes and one
for the stackdepot changes. And a fix for a very old x86 PAT issue
which can cause a warning splat"
* tag 'mm-hotfixes-stable-2024-04-05-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
stackdepot: rename pool_index to pool_index_plus_1
x86/mm/pat: fix VM_PAT handling in COW mappings
MAINTAINERS: change vmware.com addresses to broadcom.com
selftests/mm: include strings.h for ffsl
mm: vmalloc: fix lockdep warning
mm: vmalloc: bail out early in find_vmap_area() if vmap is not init
init: open output files from cpio unpacking with O_LARGEFILE
mm/secretmem: fix GUP-fast succeeding on secretmem folios
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"arm64/ptrace fix to use the correct SVE layout based on the saved
floating point state rather than the TIF_SVE flag. The latter may be
left on during syscalls even if the SVE state is discarded"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/ptrace: Use saved floating point state type to determine SVE layout
Merge tag 'riscv-for-linus-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for an __{get,put}_kernel_nofault to avoid an uninitialized
value causing spurious failures
- compat_vdso.so.dbg is now installed to the standard install location
- A fix to avoid initializing PERF_SAMPLE_BRANCH_*-related events, as
they aren't supported and will just later fail
- A fix to make AT_VECTOR_SIZE_ARCH correct now that we're providing
AT_MINSIGSTKSZ
- pgprot_nx() is now implemented, which fixes vmap W^X protection
- A fix for the vector save/restore code, which at least manifests as
corrupted vector state when a signal is taken
- A fix for a race condition in instruction patching
- A fix to avoid leaking the kernel-mode GP to userspace, which is a
kernel pointer leak that can be used to defeat KASLR in various ways
- A handful of smaller fixes to build warnings, an overzealous printk,
and some missing tracing annotations
* tag 'riscv-for-linus-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: process: Fix kernel gp leakage
riscv: Disable preemption when using patch_map()
riscv: Fix warning by declaring arch_cpu_idle() as noinstr
riscv: use KERN_INFO in do_trap
riscv: Fix vector state restore in rt_sigreturn()
riscv: mm: implement pgprot_nx
riscv: compat_vdso: align VDSOAS build log
RISC-V: Update AT_VECTOR_SIZE_ARCH for new AT_MINSIGSTKSZ
riscv: Mark __se_sys_* functions __used
drivers/perf: riscv: Disable PERF_SAMPLE_BRANCH_* while not supported
riscv: compat_vdso: install compat_vdso.so.dbg to /lib/modules/*/vdso/
riscv: hwprobe: do not produce frtace relocation
riscv: Fix spurious errors from __get/put_kernel_nofault
riscv: mm: Fix prototype to avoid discarding const
Merge tag 's390-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Fix missing NULL pointer check when determining guest/host fault
- Mark all functions in asm/atomic_ops.h, asm/atomic.h and
asm/preempt.h as __always_inline to avoid unwanted instrumentation
- Fix removal of a Processor Activity Instrumentation (PAI) sampling
event in PMU device driver
- Align system call table on 8 bytes
* tag 's390-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/entry: align system call table on 8 bytes
s390/pai: fix sampling event removal for PMU device driver
s390/preempt: mark all functions __always_inline
s390/atomic: mark all functions __always_inline
s390/mm: fix NULL pointer dereference
Merge tag 'pm-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a recent Energy Model change that went against a recent scheduler
change made independently (Vincent Guittot)"
* tag 'pm-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: EM: fix wrong utilization estimation in em_cpu_energy()
Merge tag 'thermal-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These fix two power allocator thermal governor issues and an ACPI
thermal driver regression that all were introduced during the 6.8
development cycle.
Specifics:
- Allow the power allocator thermal governor to bind to a thermal
zone without cooling devices and/or without trip points (Nikita
Travkin)
- Make the ACPI thermal driver register a tripless thermal zone when
it cannot find any usable trip points instead of returning an error
from acpi_thermal_add() (Stephen Horvath)"
* tag 'thermal-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: gov_power_allocator: Allow binding without trip points
thermal: gov_power_allocator: Allow binding without cooling devices
ACPI: thermal: Register thermal zones without valid trip points
Merge tag 'gpio-fixes-for-v6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- make sure GPIO devices are registered with the subsystem before
trying to return them to a caller of gpio_device_find()
- fix two issues with incorrect sanitization of the interrupt labels
* tag 'gpio-fixes-for-v6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: cdev: fix missed label sanitizing in debounce_setup()
gpio: cdev: check for NULL labels when sanitizing them for irqs
gpiolib: Fix triggering "kobject: 'gpiochipX' is not initialized, yet" kobject_get() errors
Merge tag 'ata-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Damien Le Moal:
- Compilation warning fixes from Arnd: one in the sata_sx4 driver due
to an incorrect calculation of the parameters passed to memcpy() and
another one in the sata_mv driver when CONFIG_PCI is not set
- Drop the owner driver field assignment in the pata_macio driver. That
is not needed as the PCI core code does that already (Krzysztof)
- Remove an unusued field in struct st_ahci_drv_data of the ahci_st
driver (Christophe)
- Add a missing clock probe error check in the sata_gemini driver
(Chen)
* tag 'ata-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: sata_gemini: Check clk_enable() result
ata: sata_mv: Fix PCI device ID table declaration compilation warning
ata: ahci_st: Remove an unused field in struct st_ahci_drv_data
ata: pata_macio: drop driver owner assignment
ata: sata_sx4: fix pdc20621_get_from_dimm() on 64-bit
Merge tag 'sound-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This became a bit bigger collection of patches, but almost all are
about device-specific fixes, and should be safe for 6.9:
- Lots of ASoC Intel SOF-related fixes/updates
- Locking fixes in SoundWire drivers
- ASoC AMD ACP/SOF updates
- ASoC ES8326 codec fixes
- HD-audio codec fixes and quirks
- A regression fix in emu10k1 synth code"
* tag 'sound-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (49 commits)
ASoC: SOF: Core: Add remove_late() to sof_init_environment failure path
ASoC: SOF: amd: fix for false dsp interrupts
ASoC: SOF: Intel: lnl: Disable DMIC/SSP offload on remove
ASoC: Intel: avs: boards: Add modules description
ASoC: codecs: ES8326: Removing the control of ADC_SCALE
ASoC: codecs: ES8326: Solve a headphone detection issue after suspend and resume
ASoC: codecs: ES8326: modify clock table
ASoC: codecs: ES8326: Solve error interruption issue
ALSA: line6: Zero-initialize message buffers
ALSA: hda/realtek: cs35l41: Support ASUS ROG G634JYR
ALSA: hda/realtek: Update Panasonic CF-SZ6 quirk to support headset with microphone
ALSA: hda/realtek: Add sound quirks for Lenovo Legion slim 7 16ARHA7 models
Revert "ALSA: emu10k1: fix synthesizer sample playback position and caching"
OSS: dmasound/paula: Mark driver struct with __refdata to prevent section mismatch
ALSA: hda/realtek: Add quirks for ASUS Laptops using CS35L56
ASoC: amd: acp: fix for acp_init function error handling
ASoC: tas2781: mark dvc_tlv with __maybe_unused
ASoC: ops: Fix wraparound for mask in snd_soc_get_volsw
ASoC: rt-sdw*: add __func__ to all error logs
ASoC: rt722-sdca-sdw: fix locking sequence
...
Merge tag 'drm-fixes-2024-04-05' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly fixes, mostly xe and i915, amdgpu on a week off, otherwise a
nouveau fix for a crash with new vulkan cts tests, and a couple of
cleanups and misc fixes.
display:
- fix typos in kerneldoc
prime:
- unbreak dma-buf export for virt-gpu
nouveau:
- uvmm: fix remap address calculation
- minor cleanups
panfrost:
- fix power-transition timeouts
xe:
- Stop using system_unbound_wq for preempt fences
- Fix saving unordered rebinding fences by attaching them as kernel
feces to the vm's resv
- Fix TLB invalidation fences completing out of order
- Move rebind TLB invalidation to the ring ops to reduce the latency
i915:
- A few DisplayPort related fixes
- eDP PSR fixes
- Remove some VM space restrictions on older platforms
- Disable automatic load CCS load balancing"
* tag 'drm-fixes-2024-04-05' of https://gitlab.freedesktop.org/drm/kernel: (22 commits)
drm/xe: Use ordered wq for preempt fence waiting
drm/xe: Move vma rebinding to the drm_exec locking loop
drm/xe: Make TLB invalidation fences unordered
drm/xe: Rework rebinding
drm/xe: Use ring ops TLB invalidation for rebinds
drm/i915/mst: Reject FEC+MST on ICL
drm/i915/mst: Limit MST+DSC to TGL+
drm/i915/dp: Fix the computation for compressed_bpp for DISPLAY < 13
drm/i915/gt: Enable only one CCS for compute workload
drm/i915/gt: Do not generate the command streamer for all the CCS
drm/i915/gt: Disable HW load balancing for CCS
drm/i915/gt: Limit the reserved VM space to only the platforms that need it
drm/i915/psr: Fix intel_psr2_sel_fetch_et_alignment usage
drm/i915/psr: Move writing early transport pipe src
drm/i915/psr: Calculate PIPE_SRCSZ_ERLY_TPT value
drm/i915/dp: Remove support for UHBR13.5
drm/i915/dp: Fix DSC state HW readout for SST connectors
drm/display: fix typo
drm/prime: Unbreak virtgpu dma-buf export
nouveau/uvmm: fix addr/range calcs for remap operations
...
stackdepot: rename pool_index to pool_index_plus_1
Commit 3ee34eabac2a ("lib/stackdepot: fix first entry having a 0-handle")
changed the meaning of the pool_index field to mean "the pool index plus
1". This made the code accessing this field less self-documenting, as
well as causing debuggers such as drgn to not be able to easily remain
compatible with both old and new kernels, because they typically do that
by testing for presence of the new field. Because stackdepot is a
debugging tool, we should make sure that it is debugger friendly.
Therefore, give the field a different name to improve readability as well
as enabling debugger backwards compatibility.
This is needed in 6.9, which would otherwise become an odd release with
the new semantics and old name so debuggers wouldn't recognize the new
semantics there.
PAT handling won't do the right thing in COW mappings: the first PTE (or,
in fact, all PTEs) can be replaced during write faults to point at anon
folios. Reliably recovering the correct PFN and cachemode using
follow_phys() from PTEs will not work in COW mappings.
Using follow_phys(), we might just get the address+protection of the anon
folio (which is very wrong), or fail on swap/nonswap entries, failing
follow_phys() and triggering a WARN_ON_ONCE() in untrack_pfn() and
track_pfn_copy(), not properly calling free_pfn_range().
In free_pfn_range(), we either wouldn't call memtype_free() or would call
it with the wrong range, possibly leaking memory.
To fix that, let's update follow_phys() to refuse returning anon folios,
and fallback to using the stored PFN inside vma->vm_pgoff for COW mappings
if we run into that.
We will now properly handle untrack_pfn() with COW mappings, where we
don't need the cachemode. We'll have to fail fork()->track_pfn_copy() if
the first page was replaced by an anon folio, though: we'd have to store
the cachemode in the VMA to make this work, likely growing the VMA size.
For now, lets keep it simple and let track_pfn_copy() just fail in that
case: it would have failed in the past with swap/nonswap entries already,
and it would have done the wrong thing with anon folios.
Simple reproducer to trigger the WARN_ON_ONCE() in untrack_pfn():
indeed it can happen if the find_vmap_area_exceed_addr_lock() gets called
concurrently because it tries to acquire two nodes locks. It was done to
prevent removing a lowest VA found on a previous step.
To address this a lowest VA is found first without holding a node lock
where it resides. As a last step we check if a VA still there because it
can go away, if removed, proceed with next lowest.
Some background. It worked before because the lock that is in question
was statically defined and initialized. As of now, the locks and data
structures are initialized in the vmalloc_init() function.
To address that issue add the check whether the "vmap_initialized"
variable is set, if not find_vmap_area() bails out on entry returning NULL.
John Sperbeck [Sat, 23 Mar 2024 15:29:34 +0000 (08:29 -0700)]
init: open output files from cpio unpacking with O_LARGEFILE
If a member of a cpio archive for an initrd or initrams is larger than
2Gb, we'll eventually fail to write to that file when we get to that
limit, unless O_LARGEFILE is set.
The problem can be seen with this recipe, assuming that BLK_DEV_RAM
is not configured:
mm/secretmem: fix GUP-fast succeeding on secretmem folios
folio_is_secretmem() currently relies on secretmem folios being LRU
folios, to save some cycles.
However, folios might reside in a folio batch without the LRU flag set, or
temporarily have their LRU flag cleared. Consequently, the LRU flag is
unreliable for this purpose.
In particular, this is the case when secretmem_fault() allocates a fresh
page and calls filemap_add_folio()->folio_add_lru(). The folio might be
added to the per-cpu folio batch and won't get the LRU flag set until the
batch was drained using e.g., lru_add_drain().
Consequently, folio_is_secretmem() might not detect secretmem folios and
GUP-fast can succeed in grabbing a secretmem folio, crashing the kernel
when we would later try reading/writing to the folio, because the folio
has been unmapped from the directmap.
Jeff Layton [Fri, 5 Apr 2024 17:56:18 +0000 (13:56 -0400)]
nfsd: hold a lighter-weight client reference over CB_RECALL_ANY
Currently the CB_RECALL_ANY job takes a cl_rpc_users reference to the
client. While a callback job is technically an RPC that counter is
really more for client-driven RPCs, and this has the effect of
preventing the client from being unhashed until the callback completes.
If nfsd decides to send a CB_RECALL_ANY just as the client reboots, we
can end up in a situation where the callback can't complete on the (now
dead) callback channel, but the new client can't connect because the old
client can't be unhashed. This usually manifests as a NFS4ERR_DELAY
return on the CREATE_SESSION operation.
The job is only holding a reference to the client so it can clear a flag
after the RPC completes. Fix this by having CB_RECALL_ANY instead hold a
reference to the cl_nfsdfs.cl_ref. Typically we only take that sort of
reference when dealing with the nfsdfs info files, but it should work
appropriately here to ensure that the nfs4_client doesn't disappear.
Fixes: 44df6f439a17 ("NFSD: add delegation reaper to react to low memory condition") Reported-by: Vladimir Benes <[email protected]> Signed-off-by: Jeff Layton <[email protected]> Signed-off-by: Chuck Lever <[email protected]>
Merge tag '9p-for-6.9-rc3' of https://github.com/martinetd/linux
Pull minor 9p cleanups from Dominique Martinet:
- kernel doc fix & removal of unused flag
- fix some bogus debug statement for read/write
* tag '9p-for-6.9-rc3' of https://github.com/martinetd/linux:
9p: remove SLAB_MEM_SPREAD flag usage
9p: Fix read/write debug statements to report server reply
9p/trans_fd: remove Excess kernel-doc comment
Merge tag '6.9-rc2-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
"Three fixes, all also for stable:
- encryption fix
- memory overrun fix
- oplock break fix"
* tag '6.9-rc2-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: do not set SMB2_GLOBAL_CAP_ENCRYPTION for SMB 3.1.1
ksmbd: validate payload size in ipc response
ksmbd: don't send oplock break if rename fails
Merge tag 'vfs-6.9-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"This contains a few small fixes. This comes with some delay because I
wanted to wait on people running their reproducers and the Easter
Holidays meant that those replies came in a little later than usual:
- Fix handling of preventing writes to mounted block devices.
Since last kernel we allow to prevent writing to mounted block
devices provided CONFIG_BLK_DEV_WRITE_MOUNTED isn't set and the
block device is opened with restricted writes. When we switched to
opening block devices as files we altered the mechanism by which we
recognize when a block device has been opened with write
restrictions.
The detection logic assumed that only read-write mounted
filesystems would apply write restrictions to their block devices
from other openers. That of course is not true since it also makes
sense to apply write restrictions for filesystems that are
read-only.
Fix the detection logic using an FMODE_* bit. We still have a few
left since we freed up a couple a while ago. I also picked up a
patch to free up four additional FMODE_* bits scheduled for the
next merge window.
- Fix counting the number of writers to a block device. This just
changes the logic to be consistent.
- Fix a bug in aio causing a NULL pointer derefernce after we
implemented batched processing in aio.
- Finally, add the changes we discussed that allows to yield block
devices early even though file closing itself is deferred.
This also allows us to remove two holder operations to get and
release the holder to align lifetime of file and holder of the
block device"
* tag 'vfs-6.9-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
aio: Fix null ptr deref in aio_complete() wakeup
fs,block: yield devices early
block: count BLK_OPEN_RESTRICT_WRITES openers
block: handle BLK_OPEN_RESTRICT_WRITES correctly
Kent Overstreet [Sun, 31 Mar 2024 21:52:12 +0000 (17:52 -0400)]
aio: Fix null ptr deref in aio_complete() wakeup
list_del_init_careful() needs to be the last access to the wait queue
entry - it effectively unlocks access.
Previously, finish_wait() would see the empty list head and skip taking
the lock, and then we'd return - but the completion path would still
attempt to do the wakeup after the task_struct pointer had been
overwritten.
Commit 4b6f4c5a67c0 ("timer/migration: Remove buggy early return on
deactivation") removed the logic to return early in tmigr_update_events()
on deactivation. With this the problem with a not properly updated first
global event in a hierarchy containing only a single group was fixed.
But when having a look at this code path with a hierarchy with more than a
single level, now unnecessary work is done (example is partially copied
from the message of the commit mentioned above):
0) CPU 0 is active thus its event is ignored (the letter 'i') and so are
upper levels' events. CPU 1 is idle and has the timer T1 enqueued.
CPU 2 also has a timer. The expiry order is T0 (ignored) < T1 < T2
1) CPU 0 goes idle without global event queued. Therefore KTIME_MAX is
pushed as its next expiry and its own event kept as "ignore". Without this
early return the following steps happen in tmigr_update_events() when
child = null and group = GRP0:0 :
2) The change now propagates up to the top. Then tmigr_update_events()
updates the group event of GRP0:0 and executes the following steps
(child = GRP0:0 and group = GRP0:0):
lock(GRP0:0->lock);
lock(GRP1:0->lock);
evt = tmigr_next_groupevt(GRP0:0); -> this removes the ignored events
in GRP0:0
... update GRP1:0 group event and timerqueue ...
unlock(GRP1:0->lock);
unlock(GRP0:0->lock);
So the dance in 1) with locking the GRP0:0->lock and removing the T0i from
the timerqueue is redundand as this is done nevertheless in 2) when
tmigr_next_groupevt(GRP0:0) is executed.
Revert commit 4b6f4c5a67c0 ("timer/migration: Remove buggy early return on
deactivation") and add a condition into return path to skip the return
only, when hierarchy contains a single group. Adapt comments accordingly.
timers/migration: Fix ignored event due to missing CPU update
When a group event is updated with its expiry unchanged but a different
CPU, that target change may go unnoticed and the event may be propagated
up with a stale CPU value. The following depicts a scenario that has
been actually observed:
0) The hierarchy has 3 levels. The left part (GRP1:0) is all idle,
including CPU 0 and CPU 1 which have a timer each: T0 and T1. They have
the same expiry value.
2) The migrator in GRP1:1 fetches the next timer for CPU 0 and finds
none. But it updates the events from its groups, starting with GRP0:0
which now has T1 as its next event. So far so good.
3) The migrator in GRP1:1 proceeds upward and updates the events in
GRP1:0. The child event TGRP0:0 is found queued with the same expiry
as before. And therefore it is left unchanged. However the target CPU
is not the same but that fact is ignored so TGRP0:0 still points to
CPU 0 when it should point to CPU 1.
4) The propagation has reached the top level and TGRP1:0, having TGRP0:0
as its first event, also wrongly points to CPU 0. TGRP1:0 is added to
the top level group.
5) The migrator in GRP1:1 dequeues the next event in top level pointing
to CPU 0. But since it actually doesn't see any real event in CPU 0, it
early returns.
6) T1 is left unhandled until either CPU 0 or CPU 1 wake up.
Some other bad scenario may involve trees with just two levels.
Fix this with unconditionally updating the CPU of the child event before
considering to early return while updating a queued event with an
unchanged expiry value.
Merge tag 'asoc-fix-v6.9-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.9
A relatively large set of fixes here, the biggest piece of it is a
series correcting some problems with the delay reporting for Intel SOF
cards but there's a bunch of other things. Everything here is driver
specific except for a fix in the core for an issue with sign extension
handling volume controls.
Dave Airlie [Fri, 5 Apr 2024 02:25:28 +0000 (12:25 +1000)]
Merge tag 'drm-xe-fixes-2024-04-04' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- Stop using system_unbound_wq for preempt fences,
as this can cause starvation when reaching more
than max_active defined by workqueue
- Fix saving unordered rebinding fences by attaching
them as kernel feces to the vm's resv
- Fix TLB invalidation fences completing out of order
- Move rebind TLB invalidation to the ring ops to reduce
the latency
x86/cpufeatures: Add CPUID_LNX_5 to track recently added Linux-defined word
Add CPUID_LNX_5 to track cpufeatures' word 21, and add the appropriate
compile-time assert in KVM to prevent direct lookups on the features in
CPUID_LNX_5. KVM uses X86_FEATURE_* flags to manage guest CPUID, and so
must translate features that are scattered by Linux from the Linux-defined
bit to the hardware-defined bit, i.e. should never try to directly access
scattered features in guest CPUID.
Opportunistically add NR_CPUID_WORDS to enum cpuid_leafs, along with a
compile-time assert in KVM's CPUID infrastructure to ensure that future
additions update cpuid_leafs along with NCAPINTS.
Merge tag 'net-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, bluetooth and bpf.
Fairly usual collection of driver and core fixes. The large selftest
accompanying one of the fixes is also becoming a common occurrence.
Current release - regressions:
- ipv6: fix infinite recursion in fib6_dump_done()
- net/rds: fix possible null-deref in newly added error path
Current release - new code bugs:
- net: do not consume a full cacheline for system_page_pool
- bpf: fix bpf_arena-related file descriptor leaks in the verifier
- drv: ice: fix freeing uninitialized pointers, fixing misuse of the
newfangled __free() auto-cleanup
Previous releases - regressions:
- x86/bpf: fixes the BPF JIT with retbleed=stuff
- xen-netfront: add missing skb_mark_for_recycle, fix page pool
accounting leaks, revealed by recently added explicit warning
- tcp: fix bind() regression for v6-only wildcard and v4-mapped-v6
non-wildcard addresses
- Bluetooth:
- replace "hci_qca: Set BDA quirk bit if fwnode exists in DT" with
better workarounds to un-break some buggy Qualcomm devices
- set conn encrypted before conn establishes, fix re-connecting to
some headsets which use slightly unusual sequence of msgs
- mptcp:
- prevent BPF accessing lowat from a subflow socket
- don't account accept() of non-MPC client as fallback to TCP
- drv: mana: fix Rx DMA datasize and skb_over_panic
- drv: i40e: fix VF MAC filter removal
Previous releases - always broken:
- gro: various fixes related to UDP tunnels - netns crossing
problems, incorrect checksum conversions, and incorrect packet
transformations which may lead to panics
- bpf: support deferring bpf_link dealloc to after RCU grace period
- nf_tables:
- release batch on table validation from abort path
- release mutex after nft_gc_seq_end from abort path
- flush pending destroy work before exit_net release
- drv: r8169: skip DASH fw status checks when DASH is disabled"
* tag 'net-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
netfilter: validate user input for expected length
net/sched: act_skbmod: prevent kernel-infoleak
net: usb: ax88179_178a: avoid the interface always configured as random address
net: dsa: sja1105: Fix parameters order in sja1110_pcs_mdio_write_c45()
net: ravb: Always update error counters
net: ravb: Always process TX descriptor ring
netfilter: nf_tables: discard table flag update with pending basechain deletion
netfilter: nf_tables: Fix potential data-race in __nft_flowtable_type_get()
netfilter: nf_tables: reject new basechain after table flag update
netfilter: nf_tables: flush pending destroy work before exit_net release
netfilter: nf_tables: release mutex after nft_gc_seq_end from abort path
netfilter: nf_tables: release batch on table validation from abort path
Revert "tg3: Remove residual error handling in tg3_suspend"
tg3: Remove residual error handling in tg3_suspend
net: mana: Fix Rx DMA datasize and skb_over_panic
net/sched: fix lockdep splat in qdisc_tree_reduce_backlog()
net: phy: micrel: lan8814: Fix when enabling/disabling 1-step timestamping
net: stmmac: fix rx queue priority assignment
net: txgbe: fix i2c dev name cannot match clkdev
net: fec: Set mac_managed_pm during probe
...
Merge tag 'bcachefs-2024-04-03' of https://evilpiepirate.org/git/bcachefs
Pull bcachefs repair code from Kent Overstreet:
"A couple more small fixes, and new repair code.
We can now automatically recover from arbitrary corrupted interior
btree nodes by scanning, and we can reconstruct metadata as needed to
bring a filesystem back into a working, consistent, read-write state
and preserve access to whatevver wasn't corrupted.
Meaning - you can blow away all metadata except for extents and
dirents leaf nodes, and repair will reconstruct everything else and
give you your data, and under the correct paths. If inodes are missing
i_size will be slightly off and permissions/ownership/timestamps will
be gone, and we do still need the snapshots btree if snapshots were in
use - in the future we'll be able to guess the snapshot tree structure
in some situations.
IOW - aside from shaking out remaining bugs (fuzz testing is still
coming), repair code should be complete and if repair ever doesn't
work that's the highest priority bug that I want to know about
immediately.
This patchset was kindly tested by a user from India who accidentally
wiped one drive out of a three drive filesystem with no replication on
the family computer - it took a couple weeks but we got everything
important back"
* tag 'bcachefs-2024-04-03' of https://evilpiepirate.org/git/bcachefs:
bcachefs: reconstruct_inode()
bcachefs: Subvolume reconstruction
bcachefs: Check for extents that point to same space
bcachefs: Reconstruct missing snapshot nodes
bcachefs: Flag btrees with missing data
bcachefs: Topology repair now uses nodes found by scanning to fill holes
bcachefs: Repair pass for scanning for btree nodes
bcachefs: Don't skip fake btree roots in fsck
bcachefs: bch2_btree_root_alloc() -> bch2_btree_root_alloc_fake()
bcachefs: Etyzinger cleanups
bcachefs: bch2_shoot_down_journal_keys()
bcachefs: Clear recovery_passes_required as they complete without errors
bcachefs: ratelimit informational fsck errors
bcachefs: Check for bad needs_discard before doing discard
bcachefs: Improve bch2_btree_update_to_text()
mean_and_variance: Drop always failing tests
bcachefs: fix nocow lock deadlock
bcachefs: BCH_WATERMARK_interior_updates
bcachefs: Fix btree node reserve
Stefan O'Rear [Wed, 27 Mar 2024 06:12:58 +0000 (02:12 -0400)]
riscv: process: Fix kernel gp leakage
childregs represents the registers which are active for the new thread
in user context. For a kernel thread, childregs->gp is never used since
the kernel gp is not touched by switch_to. For a user mode helper, the
gp value can be observed in user space after execve or possibly by other
means.
[From the email thread]
The /* Kernel thread */ comment is somewhat inaccurate in that it is also used
for user_mode_helper threads, which exec a user process, e.g. /sbin/init or
when /proc/sys/kernel/core_pattern is a pipe. Such threads do not have
PF_KTHREAD set and are valid targets for ptrace etc. even before they exec.
childregs is the *user* context during syscall execution and it is observable
from userspace in at least five ways:
1. kernel_execve does not currently clear integer registers, so the starting
register state for PID 1 and other user processes started by the kernel has
sp = user stack, gp = kernel __global_pointer$, all other integer registers
zeroed by the memset in the patch comment.
This is a bug in its own right, but I'm unwilling to bet that it is the only
way to exploit the issue addressed by this patch.
2. ptrace(PTRACE_GETREGSET): you can PTRACE_ATTACH to a user_mode_helper thread
before it execs, but ptrace requires SIGSTOP to be delivered which can only
happen at user/kernel boundaries.
3. /proc/*/task/*/syscall: this is perfectly happy to read pt_regs for
user_mode_helpers before the exec completes, but gp is not one of the
registers it returns.
4. PERF_SAMPLE_REGS_USER: LOCKDOWN_PERF normally prevents access to kernel
addresses via PERF_SAMPLE_REGS_INTR, but due to this bug kernel addresses
are also exposed via PERF_SAMPLE_REGS_USER which is permitted under
LOCKDOWN_PERF. I have not attempted to write exploit code.
5. Much of the tracing infrastructure allows access to user registers. I have
not attempted to determine which forms of tracing allow access to user
registers without already allowing access to kernel registers.
Alexandre Ghiti [Tue, 26 Mar 2024 20:30:17 +0000 (21:30 +0100)]
riscv: Disable preemption when using patch_map()
patch_map() uses fixmap mappings to circumvent the non-writability of
the kernel text mapping.
The __set_fixmap() function only flushes the current cpu tlb, it does
not emit an IPI so we must make sure that while we use a fixmap mapping,
the current task is not migrated on another cpu which could miss the
newly introduced fixmap mapping.
So in order to avoid any task migration, disable the preemption.
Reported-by: Andrea Parri <[email protected]> Closes: https://lore.kernel.org/all/ZcS+GAaM25LXsBOl@andrea/ Reported-by: Andy Chiu <[email protected]> Closes: https://lore.kernel.org/linux-riscv/CABgGipUMz3Sffu-CkmeUB1dKVwVQ73+7=sgC45-m0AE9RCjOZg@mail.gmail.com/ Fixes: cad539baa48f ("riscv: implement a memset like function for text") Fixes: 0ff7c3b33127 ("riscv: Use text_mutex instead of patch_lock") Co-developed-by: Andy Chiu <[email protected]> Signed-off-by: Andy Chiu <[email protected]> Signed-off-by: Alexandre Ghiti <[email protected]> Acked-by: Puranjay Mohan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Palmer Dabbelt <[email protected]>
* tag 'nvme-6.9-2024-04-04' of git://git.infradead.org/nvme:
nvme-fc: rename free_ctrl callback to match name pattern
nvmet-fc: move RCU read lock to nvmet_fc_assoc_exists
nvmet: implement unique discovery NQN
nvme: don't create a multipath node for zero capacity devices
nvme: split nvme_update_zone_info
nvme-multipath: don't inherit LBA-related fields for the multipath node
ASoC: SOF: Core: Add remove_late() to sof_init_environment failure path
In cases where the sof driver is unable to find the firmware and/or
topology file [1], it exits without releasing the i915 runtime
pm wakeref [2]. This results in dmesg warnings[3] during
suspend/resume or driver unbind. Add remove_late() to the failure path
of sof_init_environment so that i915 wakeref is released appropriately
[1]
[ 8.990366] sof-audio-pci-intel-mtl 0000:00:1f.3: SOF firmware and/or topology file not found.
[ 8.990396] sof-audio-pci-intel-mtl 0000:00:1f.3: Supported default profiles
[ 8.990398] sof-audio-pci-intel-mtl 0000:00:1f.3: - ipc type 1 (Requested):
[ 8.990399] sof-audio-pci-intel-mtl 0000:00:1f.3: Firmware file: intel/sof-ipc4/mtl/sof-mtl.ri
[ 8.990401] sof-audio-pci-intel-mtl 0000:00:1f.3: Topology file: intel/sof-ace-tplg/sof-mtl-rt711-2ch.tplg
[ 8.990402] sof-audio-pci-intel-mtl 0000:00:1f.3: Check if you have 'sof-firmware' package installed.
[ 8.990403] sof-audio-pci-intel-mtl 0000:00:1f.3: Optionally it can be manually downloaded from:
[ 8.990404] sof-audio-pci-intel-mtl 0000:00:1f.3: https://github.com/thesofproject/sof-bin/
[ 8.999088] sof-audio-pci-intel-mtl 0000:00:1f.3: error: sof_probe_work failed err: -2
Jakub Kicinski [Thu, 4 Apr 2024 18:37:39 +0000 (11:37 -0700)]
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-04-04
We've added 7 non-merge commits during the last 5 day(s) which contain
a total of 9 files changed, 75 insertions(+), 24 deletions(-).
The main changes are:
1) Fix x86 BPF JIT under retbleed=stuff which causes kernel panics due to
incorrect destination IP calculation and incorrect IP for relocations,
from Uros Bizjak and Joan Bruguera Micó.
2) Fix BPF arena file descriptor leaks in the verifier,
from Anton Protopopov.
3) Defer bpf_link deallocation to after RCU grace period as currently
running multi-{kprobes,uprobes} programs might still access cookie
information from the link, from Andrii Nakryiko.
4) Fix a BPF sockmap lock inversion deadlock in map_delete_elem reported
by syzkaller, from Jakub Sitnicki.
5) Fix resolve_btfids build with musl libc due to missing linux/types.h
include, from Natanael Copa.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: Prevent lock inversion deadlock in map delete elem
x86/bpf: Fix IP for relocating call depth accounting
x86/bpf: Fix IP after emitting call depth accounting
bpf: fix possible file descriptor leaks in verifier
tools/resolve_btfids: fix build with musl libc
bpf: support deferring bpf_link dealloc to after RCU grace period
bpf: put uprobe link's path and task in release callback
====================
Vincent Guittot [Thu, 4 Apr 2024 10:42:00 +0000 (12:42 +0200)]
PM: EM: fix wrong utilization estimation in em_cpu_energy()
Commit 1b600da51073 ("PM: EM: Optimize em_cpu_energy() and remove division")
has added back map_util_perf() in em_cpu_energy() computation which has
been removed with the rework of scheduler/cpufreq interface.
This is wrong because sugov_effective_cpu_perf() already takes care of
mapping the utilization to a performance level.
Fixes: 1b600da51073 ("PM: EM: Optimize em_cpu_energy() and remove division") Signed-off-by: Vincent Guittot <[email protected]> Reviewed-by: Lukasz Luba <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
Kent Gibson [Thu, 4 Apr 2024 09:33:28 +0000 (11:33 +0200)]
gpio: cdev: fix missed label sanitizing in debounce_setup()
When adding sanitization of the label, the path through
edge_detector_setup() that leads to debounce_setup() was overlooked.
A request taking this path does not allocate a new label and the
request label is freed twice when the request is released, resulting
in memory corruption.
Add label sanitization to debounce_setup().
Cc: [email protected] Fixes: b34490879baa ("gpio: cdev: sanitize the label before requesting the interrupt") Signed-off-by: Kent Gibson <[email protected]>
[Bartosz: rebased on top of the fix for empty GPIO labels] Co-developed-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]>
The buggy address belongs to the object at ffff88802cd73da0
which belongs to the cache kmalloc-8 of size 8
The buggy address is located 0 bytes inside of
allocated 1-byte region [ffff88802cd73da0, ffff88802cd73da1)
Memory state around the buggy address: ffff88802cd73c80: 07 fc fc fc 05 fc fc fc 05 fc fc fc fa fc fc fc ffff88802cd73d00: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc
>ffff88802cd73d80: fa fc fc fc 01 fc fc fc fa fc fc fc fa fc fc fc
^ ffff88802cd73e00: fa fc fc fc fa fc fc fc 05 fc fc fc 07 fc fc fc ffff88802cd73e80: 07 fc fc fc 07 fc fc fc 07 fc fc fc 07 fc fc fc
Jakub Kicinski [Thu, 4 Apr 2024 16:38:52 +0000 (09:38 -0700)]
Merge tag 'nf-24-04-04' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
Patch #1 unlike early commit path stage which triggers a call to abort,
an explicit release of the batch is required on abort, otherwise
mutex is released and commit_list remains in place.
Patch #2 release mutex after nft_gc_seq_end() in commit path, otherwise
async GC worker could collect expired objects.
Patch #3 flush pending destroy work in module removal path, otherwise UaF
is possible.
Patch #4 and #6 restrict the table dormant flag with basechain updates
to fix state inconsistency in the hook registration.
Patch #5 adds missing RCU read side lock to flowtable type to avoid races
with module removal.
* tag 'nf-24-04-04' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: discard table flag update with pending basechain deletion
netfilter: nf_tables: Fix potential data-race in __nft_flowtable_type_get()
netfilter: nf_tables: reject new basechain after table flag update
netfilter: nf_tables: flush pending destroy work before exit_net release
netfilter: nf_tables: release mutex after nft_gc_seq_end from abort path
netfilter: nf_tables: release batch on table validation from abort path
====================
net: usb: ax88179_178a: avoid the interface always configured as random address
After the commit d2689b6a86b9 ("net: usb: ax88179_178a: avoid two
consecutive device resets"), reset is not executed from bind operation and
mac address is not read from the device registers or the devicetree at that
moment. Since the check to configure if the assigned mac address is random
or not for the interface, happens after the bind operation from
usbnet_probe, the interface keeps configured as random address, although the
address is correctly read and set during open operation (the only reset
now).
In order to keep only one reset for the device and to avoid the interface
always configured as random address, after reset, configure correctly the
suitable field from the driver, if the mac address is read successfully from
the device registers or the devicetree. Take into account if a locally
administered address (random) was previously stored.
projects / linux.git / log