Linus Torvalds [Mon, 7 Jan 2013 15:50:41 +0000 (07:50 -0800)]
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
"Various fixes across the tree. The modpost error due to
virt_addr_valid() not being usable from modules required a number of
preparatory cleanups so a clean fix was possible."
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: 64-bit: Fix build if !CONFIG_MODULES
MIPS: Wire up finit_module syscall.
MIPS: Fix modpost error in modules attepting to use virt_addr_valid().
MIPS: page.h: Remove now unnecessary #ifndef __ASSEMBLY__ wrapper.
MIPS: Switch remaining assembler PAGE_SIZE users to <asm/asm-offsets.h>.
MIPS: Include PAGE_S{IZE,HIFT} in <asm/offset.h>.
MIPS: Don't include <asm/page.h> unnecessarily.
MIPS: Fix comment.
Revert "MIPS: Optimise TLB handlers for MIPS32/64 R2 cores."
MIPS: perf: Fix build failure in XLP perf support.
MIPS: Alchemy: Make 32kHz and r4k timer coexist peacefully
Linus Torvalds [Mon, 7 Jan 2013 15:42:38 +0000 (07:42 -0800)]
Merge branch 'akpm' (fixes from Andrew)
Merge emailed fixes from Andrew Morton:
"Bunch of fixes:
- delayed IPC updates. I held back on this because of some possible
outstanding bug reports, but they appear to have been addressed in
later versions
- A bunch of MAINTAINERS updates
- Yet Another RTC driver. I'd held this back while a couple of
little issues were being worked out.
I'm expecting an intrusive-but-simple patchset from Joe Perches which
splits up printk.c into kernel/printk/*. That will be a pig to
maintain for two months so if it passes testing I'd like to get it
upstream after a week or so."
* emailed patches from Andrew Morton <[email protected]>: (35 commits)
printk: fix incorrect length from print_time() when seconds > 99999
drivers/rtc/rtc-vt8500.c: fix handling of data passed in struct rtc_time
drivers/rtc/rtc-vt8500.c: correct handling of CR_24H bitfield
rtc: add RTC driver for TPS6586x
MAINTAINERS: fix drivers/staging/sm7xx/
MAINTAINERS: remove include/linux/of_pwm.h
MAINTAINERS: remove arch/*/lib/perf_event*.c
MAINTAINERS: remove drivers/mmc/host/imxmmc.*
MAINTAINERS: fix Documentation/mei/
MAINTAINERS: remove arch/x86/platform/mrst/pmu.*
MAINTAINERS: remove firmware/isci/
MAINTAINERS: fix drivers/ieee802154/
MAINTAINERS: fix .../plat-mxc/include/mach/imxfb.h
MAINTAINERS: remove drivers/video/epson1355fb.c
MAINTAINERS: fix drivers/media/usb/dvb-usb/cxusb*
MAINTAINERS: adjust for UAPI
MAINTAINERS: fix drivers/media/platform/atmel-isi.c
MAINTAINERS: fix arch/arm/mach-at91/include/mach/at_hdmac.h
MAINTAINERS: fix drivers/rtc/rtc-vt8500.c
MAINTAINERS: remove arch/arm/plat-s5p/
...
Linus Torvalds [Mon, 7 Jan 2013 15:39:32 +0000 (07:39 -0800)]
Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblaze
Pull microblaze update from Michal Simek:
"This fixes noMMU kernel and I have also added defconfig updates which
fix issue with one external dependency and enable all xilinx device
drivers for 0-day testing system.
Additionally wire up finit_module system call, and do highmem fixup
and pci warnings reported by the 0-day testing system"
* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Update microblaze defconfigs
microblaze: Fix pci compilation and sparse warnings
microblaze: Add finit_module syscall
microblaze: Kill __kmap_atomic()
microblaze: Change section flags for noMMU
microblaze: Microblaze wants sys_fork for noMMU too
Linus Torvalds [Mon, 7 Jan 2013 15:37:36 +0000 (07:37 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull integrity subsystem regression fix from James Morris:
"Commit fdf90729e578 "ima: support new kernel module syscall" by error
modified init_module() to return INTEGRITY_UNKNOWN (which is 4) to
user space if the kernel was built with CONFIG_IMA_APPRAISE=y.
As a result, user space can no longer load kernel modules using
init_module(). This commit fixes this regression."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
ima: fallback to MODULE_SIG_ENFORCE for existing kernel module syscall
drm/radeon: add quirk for d3 delay during switcheroo poweron for apple macbooks
vga-switcheroo with apple-gmux does not switch correctly on my system. The PCI
configuration space is not restored correctly, resulting in MSI not working after switch.
Only useful item in dmesg is:
[ 33.922807] radeon 0000:01:00.0: Refused to change power state, currently in D3
I did some testing, dumping the difference in ms between first succesful switch
from D3 to D0, and it seems that there is slightly more than 20 ms difference when
the device is re-enabled through vga-switcheroo.
So bump the re-enable d3 delay to 20 ms to handle this, which fixes msi not working
on my system after switcheroo-ing. Default d3_delay value is PCI_PM_D3_WAIT, 10 ms.
Gregory CLEMENT [Mon, 7 Jan 2013 10:28:42 +0000 (11:28 +0100)]
ARM: 7616/1: cache-l2x0: aurora: Use writel_relaxed instead of writel
The use of writel instead of writel_relaxed lead to deadlock in some
situation (SMP on Armada 370 for instance). The use of writel_relaxed
as it was done in the rest of this driver fixes this bug.
Gregory CLEMENT [Mon, 7 Jan 2013 10:27:14 +0000 (11:27 +0100)]
ARM: 7615/1: cache-l2x0: aurora: Invalidate during clean operation with WT enable
This patch fixes a bug for Aurora L2 cache controller when the
write-through mode is enable. For the clean operation even if we don't
have to flush the lines we still need to invalidate them.
vortex_wt_setdsout performs bit-negation on the bit position (wt&0x1f)
rather than on the resulting bitmask. This code is never actually
invoked (vortex_wt_setdsout is always called with en=1), so this does
not currently cause any problem, and this patch is simply cleanup.
Eric Dumazet [Sun, 6 Jan 2013 18:21:49 +0000 (18:21 +0000)]
tcp: fix MSG_SENDPAGE_NOTLAST logic
commit 35f9c09fe9c72e (tcp: tcp_sendpages() should call tcp_push() once)
added an internal flag : MSG_SENDPAGE_NOTLAST meant to be set on all
frags but the last one for a splice() call.
The condition used to set the flag in pipe_to_sendpage() relied on
splice() user passing the exact number of bytes present in the pipe,
or a smaller one.
But some programs pass an arbitrary high value, and the test fails.
The effect of this bug is a lack of tcp_push() at the end of a
splice(pipe -> socket) call, and possibly very slow or erratic TCP
sessions.
We should both test sd->total_len and fact that another fragment
is in the pipe (pipe->nrbufs > 1)
Many thanks to Willy for providing very clear bug report, bisection
and test programs.
Prathyush K [Thu, 27 Dec 2012 11:40:13 +0000 (06:40 -0500)]
drm/exynos: fimd: modify condition in fimd resume
If fimd is runtime suspended (by DPMS OFF), fimd_suspend does not
call fimd_activate(false) and just returns. Similarily the check in
fimd_resume should not resume if previously runtime_suspended.
Instead the existing check does the opposite. So if fimd was not
runtime suspended, suspend will turn off fimd but resume will not turn
it on. This patch fixes this issue by reversing the condition.
Valerie Aurora [Mon, 7 Jan 2013 04:38:44 +0000 (23:38 -0500)]
ext4: fix configuration dependencies for ext4 ACLs and security labels
Commit "ext4: Remove CONFIG_EXT4_FS_XATTR" removed the configuration
dependencies for ext4 xattrs from the ext4 ACLs and security labels
configuration options, but did not replace them with a dependency on
ext4 itself. Add back the dependency on ext4 so the options only show
up if ext4 is enabled.
Fabio Estevam [Sat, 5 Jan 2013 02:51:59 +0000 (03:51 +0100)]
ARM: 7612/1: imx: Do not select some errata that depends on !ARCH_MULTIPLATFORM
Since commit 62e4d357a (ARM: 7609/1: disable errata work-arounds which access
secure registers) ARM_ERRATA_743622/751472 depends on !ARCH_MULTIPLATFORM.
Since imx has been converted to multiplatform, the following warning happens:
$ make imx_v6_v7_defconfig
warning: (SOC_IMX6Q && ARCH_TEGRA_2x_SOC && ARCH_TEGRA_3x_SOC) selects
ARM_ERRATA_751472 which has unmet direct dependencies (CPU_V7 &&
!ARCH_MULTIPLATFORM)
warning: (SOC_IMX6Q && ARCH_TEGRA_3x_SOC) selects ARM_ERRATA_743622
which has unmet direct dependencies (CPU_V7 && !ARCH_MULTIPLATFORM)
warning: (SOC_IMX6Q && ARCH_TEGRA_3x_SOC) selects ARM_ERRATA_743622
which has unmet direct dependencies (CPU_V7 && !ARCH_MULTIPLATFORM)
warning: (SOC_IMX6Q && ARCH_TEGRA_2x_SOC && ARCH_TEGRA_3x_SOC) selects
ARM_ERRATA_751472 which has unmet direct dependencies (CPU_V7 &&
!ARCH_MULTIPLATFORM)
Recommended approach is to remove ARM_ERRATA_743622/751472 from being selected
by SOC_IMX6Q and apply such workarounds into the bootloader.
When a channel fails to initialize, we release all ressources,
including clocks. However, a XOR unit is not necessarily associated to
a clock (some variants of Marvell SoCs have a clock for XOR units,
some don't), so we shouldn't unconditionally be releasing the clock.
Instead, just like we do in the mv_xor_remove() function, we should
check if one clock was found before releasing it.
dma: mv_xor: fix error handling of mv_xor_channel_add()
When mv_xor_channel_add() fails for one XOR channel, we jump to the
err_channel_add label to clean up all previous channels that had been
initialized correctly. Unfortunately, while handling this error
condition, we were disposing the IRQ mapping before calling
mv_xor_channel_remove() (which does the free_irq()), which is
incorrect.
Instead, do things properly in the reverse order of the
initialization: first remove the XOR channel (so that free_irq() is
done), and then dispose the IRQ mapping.
This avoids ugly warnings when for some reason one of the XOR channel
fails to initialize.
arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces
We originally thought that the MV78230 variant of the Armada XP had
four Ethernet interfaces, like the other variants MV78260 and
MV78460. In fact, this is not true, and the MV78230 has only three
Ethernet interfaces.
So, the definitions of the Ethernet interfaces is now done as follows:
* armada-370-xp.dtsi: definitions of the first two interfaces, that
are common to Armada 370 and Armada XP
* armada-xp.dtsi: definition of the third interface, common to all
Armada XP variants.
* armada-xp-mv78260.dtsi and armada-xp-mv78460.dtsi: definition of
the fourth interface.
arm: mvebu: Armada XP MV78230 has two cores, not one
Contrary to our understanding at the time armada-xp-mv78230.dtsi was
written, the MV78230 variant of the Armada XP SoC has two cores and
not one. This patch updates the .dtsi file to take into account this
reality.
Joshua Coombs [Sun, 6 Jan 2013 10:10:39 +0000 (11:10 +0100)]
clk: mvebu: Remove inappropriate __init tagging
If the Orion WDT driver is built as a module, an opps occurs during
clk lookup when calling mvebu_clk_gating_get_src(). Remove the
inappropriate __init tag so the function is available for modules
after kernel init.
Andrew Lunn [Sun, 6 Jan 2013 10:10:38 +0000 (11:10 +0100)]
ARM: Kirkwood: Use fixed-regulator instead of board gpio call
With the change to a DT based pinctrl/gpio driver, using gpio API
calls in board-*.c files no longer works, a dereferenced NULL pointer
exception occurs instead. By converting the GPIO code into a
fixed-regulator which gets probed later once pinctrl/gpio is
available, we avoid the exception.
ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providers
Clock Management of kirkwood has moved to DT clock providers.
However, TWSI1 has not yet been done.
This switches TWSI1 of 88f6282 to DT clock providers.
Andrew Lunn [Sun, 6 Jan 2013 10:10:35 +0000 (11:10 +0100)]
Power: gpio-poweroff: Fix documentation and gpio_is_valid
Improve the documentation to clarify level vs edge triggered power off.
Improve the comments for level vs edge triggered power off.
Make use of gpio_is_valid().
Gregory CLEMENT [Tue, 4 Dec 2012 17:04:59 +0000 (18:04 +0100)]
arm: mvebu: Use dw-apb-uart instead of ns16650 as UART driver
The UART controller used in the Armada 370 and Armada XP SoCs is the
Synopsys DesignWare 8250 (aka Synopsys DesignWare ABP UART). The
improper use of the ns16550 can lead to a kernel oops during boot if
a character is sent to the UART before the initialization of the
driver. The DW APB has an extra interrupt that gets raised when
writing to the LCR when busy. This explains why we need to use
dw-apb-uart driver to handle this.
Oleg Nesterov [Sat, 5 Jan 2013 18:13:29 +0000 (19:13 +0100)]
signals: set_current_blocked() can use __set_current_blocked()
Cleanup. And I think we need more cleanups, in particular
__set_current_blocked() and sigprocmask() should die. Nobody should
ever block SIGKILL or SIGSTOP.
- Change set_current_blocked() to use __set_current_blocked()
- Change sys_sigprocmask() to use set_current_blocked(), this way it
should not worry about SIGKILL/SIGSTOP.
Commit 77097ae503b1 ("most of set_current_blocked() callers want
SIGKILL/SIGSTOP removed from set") removed the initialization of newmask
by accident, causing ltp to complain like this:
PM: Move disabling/enabling runtime PM to late suspend/early resume
Currently, the PM core disables runtime PM for all devices right
after executing subsystem/driver .suspend() callbacks for them
and re-enables it right before executing subsystem/driver .resume()
callbacks for them. This may lead to problems when there are
two devices such that the .suspend() callback executed for one of
them depends on runtime PM working for the other. In that case,
if runtime PM has already been disabled for the second device,
the first one's .suspend() won't work correctly (and analogously
for resume).
To make those issues go away, make the PM core disable runtime PM
for devices right before executing subsystem/driver .suspend_late()
callbacks for them and enable runtime PM for them right after
executing subsystem/driver .resume_early() callbacks for them. This
way the potential conflitcs between .suspend_late()/.resume_early()
and their runtime PM counterparts are still prevented from happening,
but the subtle ordering issues related to disabling/enabling runtime
PM for devices during system suspend/resume are much easier to avoid.
Roland Dreier [Fri, 4 Jan 2013 23:35:50 +0000 (15:35 -0800)]
printk: fix incorrect length from print_time() when seconds > 99999
print_prefix() passes a NULL buf to print_time() to get the length of
the time prefix; when printk times are enabled, the current code just
returns the constant 15, which matches the format "[%5lu.%06lu] " used
to print the time value. However, this is obviously incorrect when the
whole seconds part of the time gets beyond 5 digits (100000 seconds is a
bit more than a day of uptime).
The simple fix is to use snprintf(NULL, 0, ...) to calculate the actual
length of the time prefix. This could be micro-optimized but it seems
better to have simpler, more readable code here.
The bug leads to the syslog system call miscomputing which messages fit
into the userspace buffer. If there are enough messages to fill
log_buf_len and some have a timestamp >= 100000, dmesg may fail with:
# dmesg
klogctl: Bad address
When this happens, strace shows that the failure is indeed EFAULT due to
the kernel mistakenly accessing past the end of dmesg's buffer, since
dmesg asks the kernel how big a buffer it needs, allocates a bit more,
and then gets an error when it asks the kernel to fill it:
As far as I can see, the bug has been there as long as print_time(),
which comes from commit 084681d14e42 ("printk: flush continuation lines
immediately to console") in 3.5-rc5.
Tony Prisk [Fri, 4 Jan 2013 23:35:48 +0000 (15:35 -0800)]
drivers/rtc/rtc-vt8500.c: fix handling of data passed in struct rtc_time
tm_mon is 0..11, whereas vt8500 expects 1..12 for the month field,
causing invalid date errors for January, and causing the day field to
roll over incorrectly.
The century flag is only handled in vt8500_rtc_read_time, but not set in
vt8500_rtc_set_time. This patch corrects the behaviour of the century
flag.
Tony Prisk [Fri, 4 Jan 2013 23:35:47 +0000 (15:35 -0800)]
drivers/rtc/rtc-vt8500.c: correct handling of CR_24H bitfield
Control register bitfield for 12H/24H mode is handled incorrectly.
Setting CR_24H actually enables 12H mode. This patch renames the define
and changes the initialization code to correctly set 24H mode.
Added by commit 200efedd8766 ("pwm: Take over maintainership of the PWM
subsystem"), but I could not find any trace of that file being ever
added to the repository.
This file was moved to arch/arm/mach-rpc/time.c by commit a1be5d649699
("ARM: riscpc: move time-acorn.c to mach-rpc"), and the pattern for
arch/arm/mach-rpc/ already exists.
This subdirectory entry was added by commit 8a5700cd6754 ("MAINTAINERS:
add drivers/platform/msm to MSM subsystem") back in 2011, but I could
not find any trace of that directory being ever added to the repository.
Michal Hocko [Fri, 4 Jan 2013 23:35:12 +0000 (15:35 -0800)]
mm: limit mmu_gather batching to fix soft lockups on !CONFIG_PREEMPT
Since commit e303297e6c3a ("mm: extended batches for generic
mmu_gather") we are batching pages to be freed until either
tlb_next_batch cannot allocate a new batch or we are done.
This works just fine most of the time but we can get in troubles with
non-preemptible kernel (CONFIG_PREEMPT_NONE or CONFIG_PREEMPT_VOLUNTARY)
on large machines where too aggressive batching might lead to soft
lockups during process exit path (exit_mmap) because there are no
scheduling points down the free_pages_and_swap_cache path and so the
freeing can take long enough to trigger the soft lockup.
The lockup is harmless except when the system is setup to panic on
softlockup which is not that unusual.
The simplest way to work around this issue is to limit the maximum
number of batches in a single mmu_gather. 10k of collected pages should
be safe to prevent from soft lockups (we would have 2ms for one) even if
they are all freed without an explicit scheduling point.
This patch doesn't add any new explicit scheduling points because it
relies on zap_pmd_range during page tables zapping which calls
cond_resched per PMD.
The following lockup has been reported for 3.0 kernel with a huge
process (in order of hundreds gigs but I do know any more details).
mm: fix zone_watermark_ok_safe() accounting of isolated pages
Commit 702d1a6e0766 ("memory-hotplug: fix kswapd looping forever
problem") added an isolated pageblocks counter (nr_pageblock_isolate in
struct zone) and used it to adjust free pages counter in
zone_watermark_ok_safe() to prevent kswapd looping forever problem.
Then later, commit 2139cbe627b8 ("cma: fix counting of isolated pages")
fixed accounting of isolated pages in global free pages counter. It
made the previous zone_watermark_ok_safe() fix unnecessary and
potentially harmful (cause now isolated pages may be accounted twice
making free pages counter incorrect).
This patch removes the special isolated pageblocks counter altogether
which fixes zone_watermark_ok_safe() free pages check.
Remove the redundant and confusing fill_copy(). Also add copy_msg()
check for error. In this case exit from the function have to be done
instead of break, because further code interprets any error as EAGAIN.
Also define copy_msg() for the case when CONFIG_CHECKPOINT_RESTORE is
disabled.
Passing and checking of msgflg to free_copy() is redundant. This patch
sets copy to NULL on declaration instead and checks for non-NULL in
free_copy().
Note: in case of copy allocation failure, error is returned immediately.
So no need to check for IS_ERR() in free_copy().
This patch is required for checkpoint/restore in userspace.
c/r requires some way to get all pending IPC messages without deleting
them from the queue (checkpoint can fail and in this case tasks will be
resumed, so queue have to be valid).
To achive this, new operation flag MSG_COPY for sys_msgrcv() system call
was introduced. If this flag was specified, then mtype is interpreted as
number of the message to copy.
If MSG_COPY is set, then kernel will allocate dummy message with passed
size, and then use new copy_msg() helper function to copy desired message
(instead of unlinking it from the queue).
Notes:
1) Return -ENOSYS if MSG_COPY is specified, but
CONFIG_CHECKPOINT_RESTORE is not set.
Add 3 new variables and sysctls to tune them (by one "next_id" variable
for messages, semaphores and shared memory respectively). This variable
can be used to set desired id for next allocated IPC object. By default
it's equal to -1 and old behaviour is preserved. If this variable is
non-negative, then desired idr will be extracted from it and used as a
start value to search for free IDR slot.
Notes:
1) this patch doesn't guarantee that the new object will have desired
id. So it's up to user space how to handle new object with wrong id.
2) After a sucessful id allocation attempt, "next_id" will be set back
to -1 (if it was non-negative).
Joseph Lo [Fri, 4 Jan 2013 23:34:45 +0000 (15:34 -0800)]
drivers/rtc/rtc-tegra.c: convert to DT driver
After Kernel 3.7, the Tegra device will only support booting with DT.
The legacy Tegra RTC platform driver will not work anymore. This patch
converts the driver to support DT.
net/ipv4/ipconfig: really display the BOOTP/DHCP server's address.
Up to now, the debug and info messages from the ipconfig subsytem
claim to display the IP address of the DHCP/BOOTP server but
display instead the IP address of the bootserver. Fix that.
* pm-cpufreq:
cpufreq / governor: Fix problem with cpufreq_ondemand or cpufreq_conservative
cpufreq / Longhaul: Disable driver by default
cpufreq / stats: fix race between stats allocation and first usage
By Sivaram Nair (2) and others
* pm-cpuidle:
cpuidle: fix lock contention in the idle path
intel_idle: pr_debug information need separated
cpuidle / coupled: fix ready counter decrement
cpuidle: Fix finding state with min power_usage
* acpi-assorted:
ACPI / scan: Do not use dummy HID for system bus ACPI nodes
ACPI / power: Remove useless message from device registering routine
ACPI / glue: Update DBG macro to include KERN_DEBUG
ACPI / PM: Do not apply ACPI_SUCCESS() to acpi_bus_get_device() result
ACPI / memhotplug: remove redundant logic of acpi memory hotadd
ACPI / APEI: Fix the returned value in erst_dbg_read
ACPI / scan: Do not use dummy HID for system bus ACPI nodes
At one point acpi_device_set_id() checks if acpi_device_hid(device)
returns NULL, but that never happens, so system bus devices with an
empty list of PNP IDs are given the dummy HID ("device") instead of
the "system bus HID" ("LNXSYBUS"). Fix the code to use the right
check.
When using nanosleep() in an userspace application we get a
ratelimit warning
NOHZ: local_softirq_pending 08
for 10 times.
This patch replaces netif_rx() with netif_rx_ni() which has
to be used from process/softirq context.
The process/softirq context will be called from fakelb driver.
Ath9k consists of 2 different sub-modules: ATH9K and ATH9K_HTC.
Both uses common Atheros code from ath.ko and need ATH_COMMON.
However, while ATH9K selects ATH_COMMON, ATH9K_HTC does not.
As result, if ATH9K_HTC is the only Atheros card selected, compilation fails with
unresolved symbols.
This patch moves ATH_COMMON selection to the common part for both
ATH9K and ATH9K_HTC
Linus Torvalds [Fri, 4 Jan 2013 18:41:54 +0000 (10:41 -0800)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64
Pull ARM64 fixes from Catalin Marinas:
- Missing include in asm/compat.h.
- Kconfig updates.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
arm64: Always select ARM_AMBA and GENERIC_GPIO
arm64: Keep the ARM64 Kconfig selects sorted
arm64: Include linux/ptrace.h in asm/compat.h
Linus Torvalds [Fri, 4 Jan 2013 18:30:11 +0000 (10:30 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input update from Dmitry Torokhov:
"Updates for the input subsystem. Just a couple of driver fixes this
time."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: gpio_keys - defer probing if GPIO probing is deferred
Input: gpio_keys_polled - defer probing if GPIO probing is deferred
Input: sentelic - only report position of first finger as ST coordinates
Linus Torvalds [Fri, 4 Jan 2013 18:29:01 +0000 (10:29 -0800)]
Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull radeon and minor nouveau fixes from Dave Airlie:
"Just a radeon pull from Alex, fixes a few regressions since 3.7 and
reworks some of the reset handling, and two minor nouveau fixes I
found on the list, Ben will be back next week to take care of the
couple of larger nouveau patches that I see outstanding."
* 'drm-next' of git://people.freedesktop.org/~airlied/linux:
drm/nouveau: fix init with agpgart-uninorth
drm: nouveau: Fix build warning seen if HWMON is undefined
drm/radeon: switch to a finer grained reset for SI (v2)
drm/radeon: switch to a finer grained reset for cayman/TN
drm/radeon: switch to a finer grained reset for evergreen
drm/radeon: switch to a finer grained reset for r6xx/7xx
drm/radeon: add GPU reset flags
drm/radeon: fix typo in evergreen dma fence
drm/radeon: Properly handle DDC probe for DP bridges
drm/radeon: reset dma engine on gpu reset (v2)
drm/radeon: print dma status reg on lockup (v2)
drm/radeon: improve ring debugfs printing
drm/radeon: add debugfs file for dma rings
drm/radeon/r6xx: fix DMA engine for ttm bo transfers
drm/radeon: add connector table for Mac G4 Silver
Partially revert commit (SUNRPC: add WARN_ON_ONCE for potential deadlock).
The looping behaviour has been tracked down to a knownn issue with
workqueues, and a workaround has now been implemented.
Trond Myklebust [Fri, 4 Jan 2013 17:47:04 +0000 (12:47 -0500)]
NFS: Ensure that we free the rpc_task after read and write cleanups are done
This patch ensures that we free the rpc_task after the cleanup callbacks
are done in order to avoid a deadlock problem that can be triggered if
the callback needs to wait for another workqueue item to complete.
Trond Myklebust [Fri, 4 Jan 2013 17:23:21 +0000 (12:23 -0500)]
SUNRPC: Ensure that we free the rpc_task after cleanups are done
This patch ensures that we free the rpc_task after the cleanup callbacks
are done in order to avoid a deadlock problem that can be triggered if
the callback needs to wait for another workqueue item to complete.
Alex Deucher [Fri, 4 Jan 2013 14:24:18 +0000 (09:24 -0500)]
drm/radeon: split r6xx and r7xx copy_dma functions
- r6xx actually uses a slightly different packet format,
although both formats seem to work ok.
- r7xx doesn't have the count multiple of 2 limitation.
Lothar Waßmann [Thu, 22 Nov 2012 12:49:14 +0000 (13:49 +0100)]
video: mxsfb: fix crash when unblanking the display
The VDCTRL4 register does not provide the MXS SET/CLR/TOGGLE feature.
The write in mxsfb_disable_controller() sets the data_cnt for the LCD
DMA to 0 which obviously means the max. count for the LCD DMA and
leads to overwriting arbitrary memory when the display is unblanked.
projects / linux.git / log