Szymon Heidrich [Wed, 11 Jan 2023 17:50:31 +0000 (18:50 +0100)]
wifi: rndis_wlan: Prevent buffer overflow in rndis_query_oid
Since resplen and respoffs are signed integers sufficiently
large values of unsigned int len and offset members of RNDIS
response will result in negative values of prior variables.
This may be utilized to bypass implemented security checks
to either extract memory contents by manipulating offset or
overflow the data buffer via memcpy by manipulating both
offset and len.
Additionally assure that sum of resplen and respoffs does not
overflow so buffer boundaries are kept.
Arend van Spriel [Wed, 11 Jan 2023 11:24:19 +0000 (12:24 +0100)]
wifi: brcmfmac: fix regression for Broadcom PCIe wifi devices
A sanity check was introduced considering maximum flowrings above
256 as insane and effectively aborting the device probe. This
resulted in regression for number of users as the value turns out
to be sane after all.
wifi: brcmfmac: avoid NULL-deref in survey dump for 2G only device
When dealing with a device for 2GHz band only the wiphy->bands for
5GHz will be NULL. This would result in a NULL-deref in the
brcmf_cfg80211_dump_survey() function. Rework the code with a
for-loop to make it easier to add another band.
wifi: brcmfmac: avoid handling disabled channels for survey dump
An issue was reported in which periodically error messages are
printed in the kernel log:
[ 26.303445] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 26.303554] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.bin failed with error -2
[ 26.516752] brcmfmac_wcc: brcmf_wcc_attach: executing
[ 26.528264] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan 4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e
[ 27.076829] Bluetooth: hci0: BCM: features 0x2f
[ 27.078592] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+
[ 27.078601] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0342
[ 30.142104] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SS
[ 30.590017] Bluetooth: MGMT ver 1.22
[ 104.897615] brcmfmac: cfg80211_set_channel: set chanspec 0x100e fail, reason -52
[ 104.897992] brcmfmac: cfg80211_set_channel: set chanspec 0xd022 fail, reason -52
[ 105.007672] brcmfmac: cfg80211_set_channel: set chanspec 0xd026 fail, reason -52
[ 105.117654] brcmfmac: cfg80211_set_channel: set chanspec 0xd02a fail, reason -52
[ 105.227636] brcmfmac: cfg80211_set_channel: set chanspec 0xd02e fail, reason -52
[ 106.987552] brcmfmac: cfg80211_set_channel: set chanspec 0xd090 fail, reason -52
[ 106.987911] brcmfmac: cfg80211_set_channel: set chanspec 0xd095 fail, reason -52
[ 106.988233] brcmfmac: cfg80211_set_channel: set chanspec 0xd099 fail, reason -52
[ 106.988565] brcmfmac: cfg80211_set_channel: set chanspec 0xd09d fail, reason -52
[ 106.988909] brcmfmac: cfg80211_set_channel: set chanspec 0xd0a1 fail, reason -52
This happens in brcmf_cfg80211_dump_survey() because we try a disabled
channel. When channel is marked as disabled we do not need to fill any
other info so bail out.
Marek Vasut [Mon, 16 Jan 2023 09:49:57 +0000 (10:49 +0100)]
gpio: mxc: Always set GPIOs used as interrupt source to INPUT mode
Always configure GPIO pins which are used as interrupt source as INPUTs.
In case the default pin configuration is OUTPUT, or the prior stage does
configure the pins as OUTPUT, then Linux will not reconfigure the pin as
INPUT and no interrupts are received.
Always configure the interrupt source GPIO pin as input to fix the above case.
Reviewed-by: Linus Walleij <[email protected]> Fixes: 07bd1a6cc7cbb ("MXC arch: Add gpio support for the whole platform") Signed-off-by: Marek Vasut <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]>
Marek Vasut [Mon, 16 Jan 2023 09:49:56 +0000 (10:49 +0100)]
gpio: mxc: Protect GPIO irqchip RMW with bgpio spinlock
The driver currently performs register read-modify-write without locking
in its irqchip part, this could lead to a race condition when configuring
interrupt mode setting. Add the missing bgpio spinlock lock/unlock around
the register read-modify-write.
Yu Kuai [Tue, 3 Jan 2023 08:47:55 +0000 (16:47 +0800)]
block, bfq: switch 'bfqg->ref' to use atomic refcount apis
The updating of 'bfqg->ref' should be protected by 'bfqd->lock', however,
during code review, we found that bfq_pd_free() update 'bfqg->ref'
without holding the lock, which is problematic:
1) bfq_pd_free() triggered by removing cgroup is called asynchronously;
2) bfqq will grab bfqg reference, and exit bfqq will drop the reference,
which can concurrent with 1).
Unfortunately, 'bfqd->lock' can't be held here because 'bfqd' might already
be freed in bfq_pd_free(). Fix the problem by using atomic refcount apis.
Damien Le Moal [Fri, 6 Jan 2023 08:43:06 +0000 (17:43 +0900)]
zonefs: Detect append writes at invalid locations
Using REQ_OP_ZONE_APPEND operations for synchronous writes to sequential
files succeeds regardless of the zone write pointer position, as long as
the target zone is not full. This means that if an external (buggy)
application writes to the zone of a sequential file underneath the file
system, subsequent file write() operation will succeed but the file size
will not be correct and the file will contain invalid data written by
another application.
Modify zonefs_file_dio_append() to check the written sector of an append
write (returned in bio->bi_iter.bi_sector) and return -EIO if there is a
mismatch with the file zone wp offset field. This change triggers a call
to zonefs_io_error() and a zone check. Modify zonefs_io_error_cb() to
not expose the unexpected data after the current inode size when the
errors=remount-ro mode is used. Other error modes are correctly handled
already.
Linus Torvalds [Sun, 15 Jan 2023 13:17:44 +0000 (07:17 -0600)]
Merge tag 'x86_urgent_for_v6.2_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Make sure the poking PGD is pinned for Xen PV as it requires it this
way
- Fixes for two resctrl races when moving a task or creating a new
monitoring group
- Fix SEV-SNP guests running under HyperV where MTRRs are disabled to
not return a UC- type mapping type on memremap() and thus cause a
serious slowdown
- Fix insn mnemonics in bioscall.S now that binutils is starting to fix
confusing insn suffixes
* tag 'x86_urgent_for_v6.2_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: fix poking_init() for Xen PV guests
x86/resctrl: Fix event counts regression in reused RMIDs
x86/resctrl: Fix task CLOSID/RMID update race
x86/pat: Fix pat_x_mtrr_type() for MTRR disabled case
x86/boot: Avoid using Intel mnemonics in AT&T syntax asm
Linus Torvalds [Sun, 15 Jan 2023 13:12:58 +0000 (07:12 -0600)]
Merge tag 'edac_urgent_for_v6.2_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
- Fix the EDAC device's confusion in the polling setting units
- Fix a memory leak in highbank's probing function
* tag 'edac_urgent_for_v6.2_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/highbank: Fix memory leak in highbank_mc_probe()
EDAC/device: Fix period calculation in edac_device_reset_delay_period()
Linus Torvalds [Sun, 15 Jan 2023 13:09:41 +0000 (07:09 -0600)]
Merge tag 'powerpc-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix a build failure with some versions of ld that have an odd version
string
- Fix incorrect use of mutex in the IMC PMU driver
Thanks to Kajol Jain, Michael Petlan, Ojaswin Mujoo, Peter Zijlstra, and
Yang Yingliang.
* tag 'powerpc-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s/hash: Make stress_hpt_timer_fn() static
powerpc/imc-pmu: Fix use of mutex in IRQs disabled section
powerpc/boot: Fix incorrect version calculation issue in ld_version
Linus Torvalds [Sat, 14 Jan 2023 16:48:15 +0000 (10:48 -0600)]
Merge tag 'iommu-fixes-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Core: Fix an iommu-group refcount leak
- Fix overflow issue in IOVA alloc path
- ARM-SMMU fixes from Will:
- Fix VFIO regression on NXP SoCs by reporting IOMMU_CAP_CACHE_COHERENCY
- Fix SMMU shutdown paths to avoid device unregistration race
- Error handling fix for Mediatek IOMMU driver
* tag 'iommu-fixes-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/mediatek-v1: Fix an error handling path in mtk_iommu_v1_probe()
iommu/iova: Fix alloc iova overflows issue
iommu: Fix refcount leak in iommu_device_claim_dma_owner
iommu/arm-smmu-v3: Don't unregister on shutdown
iommu/arm-smmu: Don't unregister on shutdown
iommu/arm-smmu: Report IOMMU_CAP_CACHE_COHERENCY even betterer
Linus Torvalds [Sat, 14 Jan 2023 16:08:08 +0000 (10:08 -0600)]
Merge tag 'fixes-2023-01-14' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"memblock: always release pages to the buddy allocator in
memblock_free_late()
If CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, memblock_free_pages()
only releases pages to the buddy allocator if they are not in the
deferred range. This is correct for free pages (as defined by
for_each_free_mem_pfn_range_in_zone()) because free pages in the
deferred range will be initialized and released as part of the
deferred init process.
memblock_free_pages() is called by memblock_free_late(), which is used
to free reserved ranges after memblock_free_all() has run. All pages
in reserved ranges have been initialized at that point, and
accordingly, those pages are not touched by the deferred init process.
This means that currently, if the pages that memblock_free_late()
intends to release are in the deferred range, they will never be
released to the buddy allocator. They will forever be reserved.
In addition, memblock_free_pages() calls kmsan_memblock_free_pages(),
which is also correct for free pages but is not correct for reserved
pages. KMSAN metadata for reserved pages is initialized by
kmsan_init_shadow(), which runs shortly before memblock_free_all().
For both of these reasons, memblock_free_pages() should only be called
for free pages, and memblock_free_late() should call
__free_pages_core() directly instead.
One case where this issue can occur in the wild is EFI boot on x86_64.
The x86 EFI code reserves all EFI boot services memory ranges via
memblock_reserve() and frees them later via memblock_free_late()
(efi_reserve_boot_services() and efi_free_boot_services(),
respectively).
If any of those ranges happens to fall within the deferred init range,
the pages will not be released and that memory will be unavailable.
For example, on an Amazon EC2 t3.micro VM (1 GB) booting via EFI:
* tag 'fixes-2023-01-14' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
mm: Always release pages to the buddy allocator in memblock_free_late().
Linus Torvalds [Sat, 14 Jan 2023 16:04:00 +0000 (10:04 -0600)]
Merge tag 'hardening-v6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kernel hardening fixes from Kees Cook:
- Fix CFI hash randomization with KASAN (Sami Tolvanen)
- Check size of coreboot table entry and use flex-array
* tag 'hardening-v6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kbuild: Fix CFI hash randomization with KASAN
firmware: coreboot: Check size of table entry and use flex-array
Linus Torvalds [Sat, 14 Jan 2023 14:08:25 +0000 (08:08 -0600)]
Merge tag '6.2-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
- memory leak and double free fix
- two symlink fixes
- minor cleanup fix
- two smb1 fixes
* tag '6.2-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix uninitialized memory read for smb311 posix symlink create
cifs: fix potential memory leaks in session setup
cifs: do not query ifaces on smb1 mounts
cifs: fix double free on failed kerberos auth
cifs: remove redundant assignment to the variable match
cifs: fix file info setting in cifs_open_file()
cifs: fix file info setting in cifs_query_path_info()
Linus Torvalds [Sat, 14 Jan 2023 13:57:25 +0000 (07:57 -0600)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two minor fixes in the hisi_sas driver which only impact enterprise
style multi-expander and shared disk situations and no core changes"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: hisi_sas: Set a port invalid only if there are no devices attached when refreshing port id
scsi: hisi_sas: Use abort task set to reset SAS disks when discovered
Linus Torvalds [Sat, 14 Jan 2023 13:52:11 +0000 (07:52 -0600)]
Merge tag 'ata-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA fix from Damien Le Moal:
"A single fix to prevent building the pata_cs5535 driver with user mode
linux as it uses msr operations that are not defined with UML"
* tag 'ata-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: pata_cs5535: Don't build on UML
Rahul Rameshbabu [Fri, 13 Jan 2023 00:55:29 +0000 (16:55 -0800)]
sch_htb: Avoid grafting on htb_destroy_class_offload when destroying htb
Peek at old qdisc and graft only when deleting a leaf class in the htb,
rather than when deleting the htb itself. Do not peek at the qdisc of the
netdev queue when destroying the htb. The caller may already have grafted a
new qdisc that is not part of the htb structure being destroyed.
This fix resolves two use cases.
1. Using tc to destroy the htb.
- Netdev was being prematurely activated before the htb was fully
destroyed.
2. Using tc to replace the htb with another qdisc (which also leads to
the htb being destroyed).
- Premature netdev activation like previous case. Newly grafted qdisc
was also getting accidentally overwritten when destroying the htb.
====================
mptcp: userspace pm: create sockets for the right family
Before these patches, the Userspace Path Manager would allow the
creation of subflows with wrong families: taking the one of the MPTCP
socket instead of the provided ones and resulting in the creation of
subflows with likely not the right source and/or destination IPs. It
would also allow the creation of subflows between different families or
not respecting v4/v6-only socket attributes.
Patch 1 lets the userspace PM select the proper family to avoid creating
subflows with the wrong source and/or destination addresses because the
family is not the expected one.
Patch 2 makes sure the userspace PM doesn't allow the userspace to
create subflows for a family that is not allowed.
Patch 3 validates scenarios with a mix of v4 and v6 subflows for the
same MPTCP connection.
These patches fix issues introduced in v5.19 when the userspace path
manager has been introduced.
====================
MPTCP protocol supports having subflows in both IPv4 and IPv6. In Linux,
it is possible to have that if the MPTCP socket has been created with
AF_INET6 family without the IPV6_V6ONLY option.
Here, a new IPv4 subflow is being added to the initial IPv6 connection,
then being removed using Netlink commands.
Matthieu Baerts [Thu, 12 Jan 2023 17:42:52 +0000 (18:42 +0100)]
mptcp: netlink: respect v4/v6-only sockets
If an MPTCP socket has been created with AF_INET6 and the IPV6_V6ONLY
option has been set, the userspace PM would allow creating subflows
using IPv4 addresses, e.g. mapped in v6.
The kernel side of userspace PM will also accept creating subflows with
local and remote addresses having different families. Depending on the
subflow socket's family, different behaviours are expected:
- If AF_INET is forced with a v6 address, the kernel will take the last
byte of the IP and try to connect to that: a new subflow is created
but to a non expected address.
- If AF_INET6 is forced with a v4 address, the kernel will try to
connect to a v4 address (v4-mapped-v6). A -EBADF error from the
connect() part is then expected.
It is then required to check the given families can be accepted. This is
done by using a new helper for addresses family matching, taking care of
IPv4 vs IPv4-mapped-IPv6 addresses. This helper will be re-used later by
the in-kernel path-manager to use mixed IPv4 and IPv6 addresses.
While at it, a clear error message is now reported if there are some
conflicts with the families that have been passed by the userspace.
Paolo Abeni [Thu, 12 Jan 2023 17:42:51 +0000 (18:42 +0100)]
mptcp: explicitly specify sock family at subflow creation time
Let the caller specify the to-be-created subflow family.
For a given MPTCP socket created with the AF_INET6 family, the current
userspace PM can already ask the kernel to create subflows in v4 and v6.
If "plain" IPv4 addresses are passed to the kernel, they are
automatically mapped in v6 addresses "by accident". This can be
problematic because the userspace will need to pass different addresses,
now the v4-mapped-v6 addresses to destroy this new subflow.
On the other hand, if the MPTCP socket has been created with the AF_INET
family, the command to create a subflow in v6 will be accepted but the
result will not be the one as expected as new subflow will be created in
IPv4 using part of the v6 addresses passed to the kernel: not creating
the expected subflow then.
No functional change intended for the in-kernel PM where an explicit
enforcement is currently in place. This arbitrary enforcement will be
leveraged by other patches in a future version.
Clément Léger [Thu, 12 Jan 2023 16:13:11 +0000 (17:13 +0100)]
net: lan966x: add missing fwnode_handle_put() for ports node
Since the "ethernet-ports" node is retrieved using
device_get_named_child_node(), it should be release after using it. Add
missing fwnode_handle_put() and move the code that retrieved the node
from device-tree to avoid complicated handling in case of error.
but I'll say it anyway: the enetc_tx_onestep_tstamp() work item runs in
process context, therefore with softirqs enabled (i.o.w., it can be
interrupted by a softirq). If we hold the netif_tx_lock() when there is
an interrupt, and the NET_TX softirq then gets scheduled, this will take
the netif_tx_lock() a second time and deadlock the kernel.
To solve this, use netif_tx_lock_bh(), which blocks softirqs from
running.
Jisoo Jang [Wed, 11 Jan 2023 13:19:14 +0000 (22:19 +0900)]
net: nfc: Fix use-after-free in local_cleanup()
Fix a use-after-free that occurs in kfree_skb() called from
local_cleanup(). This could happen when killing nfc daemon (e.g. neard)
after detaching an nfc device.
When detaching an nfc device, local_cleanup() called from
nfc_llcp_unregister_device() frees local->rx_pending and decreases
local->ref by kref_put() in nfc_llcp_local_put().
In the terminating process, nfc daemon releases all sockets and it leads
to decreasing local->ref. After the last release of local->ref,
local_cleanup() called from local_release() frees local->rx_pending
again, which leads to the bug.
Setting local->rx_pending to NULL in local_cleanup() could prevent
use-after-free when local_cleanup() is called twice.
Linus Torvalds [Fri, 13 Jan 2023 23:41:19 +0000 (17:41 -0600)]
Merge tag 'block-6.2-2023-01-13' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"Nothing major in here, just a collection of NVMe fixes and dropping a
wrong might_sleep() that static checkers tripped over but which isn't
valid"
* tag 'block-6.2-2023-01-13' of git://git.kernel.dk/linux:
MAINTAINERS: stop nvme matching for nvmem files
nvme: don't allow unprivileged passthrough on partitions
nvme: replace the "bool vec" arguments with flags in the ioctl path
nvme: remove __nvme_ioctl
nvme-pci: fix error handling in nvme_pci_enable()
nvme-pci: add NVME_QUIRK_IDENTIFY_CNS quirk to Apple T2 controllers
nvme-apple: add NVME_QUIRK_IDENTIFY_CNS quirk to fix regression
block: Drop spurious might_sleep() from blk_put_queue()
Linus Torvalds [Fri, 13 Jan 2023 23:37:09 +0000 (17:37 -0600)]
Merge tag 'io_uring-6.2-2023-01-13' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
"A fix for a regression that happened last week, rest is fixes that
will be headed to stable as well. In detail:
- Fix for a regression added with the leak fix from last week (me)
- In writing a test case for that leak, inadvertently discovered a
case where we a poll request can race. So fix that up and mark it
for stable, and also ensure that fdinfo covers both the poll tables
that we have. The latter was an oversight when the split poll table
were added (me)
- Fix for a lockdep reported issue with IOPOLL (Pavel)"
* tag 'io_uring-6.2-2023-01-13' of git://git.kernel.dk/linux:
io_uring: lock overflowing for IOPOLL
io_uring/poll: attempt request issue after racy poll wakeup
io_uring/fdinfo: include locked hash table in fdinfo output
io_uring/poll: add hash if ready poll request can't complete inline
io_uring/io-wq: only free worker if it was allocated for creation
Linus Torvalds [Fri, 13 Jan 2023 23:32:22 +0000 (17:32 -0600)]
Merge tag 'pci-v6.2-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci fixes from Bjorn Helgaas:
- Work around apparent firmware issue that made Linux reject MMCONFIG
space, which broke PCI extended config space (Bjorn Helgaas)
- Fix CONFIG_PCIE_BT1 dependency due to mid-air collision between a
PCI_MSI_IRQ_DOMAIN -> PCI_MSI change and addition of PCIE_BT1 (Lukas
Bulwahn)
* tag 'pci-v6.2-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
x86/pci: Treat EfiMemoryMappedIO as reservation of ECAM space
x86/pci: Simplify is_mmconf_reserved() messages
PCI: dwc: Adjust to recent removal of PCI_MSI_IRQ_DOMAIN
Sami Tolvanen [Thu, 12 Jan 2023 22:49:48 +0000 (22:49 +0000)]
kbuild: Fix CFI hash randomization with KASAN
Clang emits a asan.module_ctor constructor to each object file
when KASAN is enabled, and these functions are indirectly called
in do_ctors. With CONFIG_CFI_CLANG, the compiler also emits a CFI
type hash before each address-taken global function so they can
pass indirect call checks.
However, in commit 0c3e806ec0f9 ("x86/cfi: Add boot time hash
randomization"), x86 implemented boot time hash randomization,
which relies on the .cfi_sites section generated by objtool. As
objtool is run against vmlinux.o instead of individual object
files with X86_KERNEL_IBT (enabled by default), CFI types in
object files that are not part of vmlinux.o end up not being
included in .cfi_sites, and thus won't get randomized and trip
CFI when called.
Only .vmlinux.export.o and init/version-timestamp.o are linked
into vmlinux separately from vmlinux.o. As these files don't
contain any functions, disable KASAN for both of them to avoid
breaking hash randomization.
Kees Cook [Thu, 12 Jan 2023 23:03:16 +0000 (15:03 -0800)]
firmware: coreboot: Check size of table entry and use flex-array
The memcpy() of the data following a coreboot_table_entry couldn't
be evaluated by the compiler under CONFIG_FORTIFY_SOURCE. To make it
easier to reason about, add an explicit flexible array member to struct
coreboot_device so the entire entry can be copied at once. Additionally,
validate the sizes before copying. Avoids this run-time false positive
warning:
memcpy: detected field-spanning write (size 168) of single field "&device->entry" at drivers/firmware/google/coreboot_table.c:103 (size 8)
Nicholas Piggin [Thu, 12 Jan 2023 10:54:26 +0000 (20:54 +1000)]
kallsyms: Fix scheduling with interrupts disabled in self-test
kallsyms_on_each* may schedule so must not be called with interrupts
disabled. The iteration function could disable interrupts, but this
also changes lookup_symbol() to match the change to the other timing
code.
Linus Torvalds [Fri, 13 Jan 2023 20:41:50 +0000 (14:41 -0600)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix the PMCR_EL0 reset value after the PMU rework
- Correctly handle S2 fault triggered by a S1 page table walk by not
always classifying it as a write, as this breaks on R/O memslots
- Document why we cannot exit with KVM_EXIT_MMIO when taking a write
fault from a S1 PTW on a R/O memslot
- Put the Apple M2 on the naughty list for not being able to
correctly implement the vgic SEIS feature, just like the M1 before
it
- Reviewer updates: Alex is stepping down, replaced by Zenghui
x86:
- Fix various rare locking issues in Xen emulation and teach lockdep
to detect them
- Documentation improvements
- Do not return host topology information from KVM_GET_SUPPORTED_CPUID"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/xen: Avoid deadlock by adding kvm->arch.xen.xen_lock leaf node lock
KVM: Ensure lockdep knows about kvm->lock vs. vcpu->mutex ordering rule
KVM: x86/xen: Fix potential deadlock in kvm_xen_update_runstate_guest()
KVM: x86/xen: Fix lockdep warning on "recursive" gpc locking
Documentation: kvm: fix SRCU locking order docs
KVM: x86: Do not return host topology information from KVM_GET_SUPPORTED_CPUID
KVM: nSVM: clarify recalc_intercepts() wrt CR8
MAINTAINERS: Remove myself as a KVM/arm64 reviewer
MAINTAINERS: Add Zenghui Yu as a KVM/arm64 reviewer
KVM: arm64: vgic: Add Apple M2 cpus to the list of broken SEIS implementations
KVM: arm64: Convert FSC_* over to ESR_ELx_FSC_*
KVM: arm64: Document the behaviour of S1PTW faults on RO memslots
KVM: arm64: Fix S1PTW handling on RO memslots
KVM: arm64: PMU: Fix PMCR_EL0 reset value
Mateusz Guzik [Fri, 13 Jan 2023 18:44:47 +0000 (19:44 +0100)]
lockref: stop doing cpu_relax in the cmpxchg loop
On the x86-64 architecture even a failing cmpxchg grants exclusive
access to the cacheline, making it preferable to retry the failed op
immediately instead of stalling with the pause instruction.
To illustrate the impact, below are benchmark results obtained by
running various will-it-scale tests on top of the 6.2-rc3 kernel and
Cascade Lake (2 sockets * 24 cores * 2 threads) CPU.
All results in ops/s. Note there is some variance in re-runs, but the
code is consistently faster when contention is present.
That is, fixing the problems in access itself *reduces* scalability
after the cacheline ping-pong only happens in lockref with the pause
instruction.
Note that fstat and access benchmarks are not currently integrated into
will-it-scale, but interested parties can find them in pull requests to
said project.
Code at hand has a rather tortured history. First modification showed
up in commit d472d9d98b46 ("lockref: Relax in cmpxchg loop"), written
with Itanium in mind. Later it got patched up to use an arch-dependent
macro to stop doing it on s390 where it caused a significant regression.
Said macro had undergone revisions and was ultimately eliminated later,
going back to cpu_relax.
While I intended to only remove cpu_relax for x86-64, I got the
following comment from Linus:
I would actually prefer just removing it entirely and see if
somebody else hollers. You have the numbers to prove it hurts on
real hardware, and I don't think we have any numbers to the
contrary.
So I think it's better to trust the numbers and remove it as a
failure, than say "let's just remove it on x86-64 and leave
everybody else with the potentially broken code"
Additionally, Will Deacon (maintainer of the arm64 port, one of the
architectures previously benchmarked):
So, from the arm64 side of the fence, I'm perfectly happy just
removing the cpu_relax() calls from lockref.
As such, come back full circle in history and whack it altogether.
Bjorn Helgaas [Tue, 10 Jan 2023 18:02:43 +0000 (12:02 -0600)]
x86/pci: Treat EfiMemoryMappedIO as reservation of ECAM space
Normally we reject ECAM space unless it is reported as reserved in the E820
table or via a PNP0C02 _CRS method (PCI Firmware, r3.3, sec 4.1.2).
07eab0901ede ("efi/x86: Remove EfiMemoryMappedIO from E820 map"), removes
E820 entries that correspond to EfiMemoryMappedIO regions because some
other firmware uses EfiMemoryMappedIO for PCI host bridge windows, and the
E820 entries prevent Linux from allocating BAR space for hot-added devices.
Some firmware doesn't report ECAM space via PNP0C02 _CRS methods, but does
mention it as an EfiMemoryMappedIO region via EFI GetMemoryMap(), which is
normally converted to an E820 entry by a bootloader or EFI stub. After 07eab0901ede, that E820 entry is removed, so we reject this ECAM space,
which makes PCI extended config space (offsets 0x100-0xfff) inaccessible.
The lack of extended config space breaks anything that relies on it,
including perf, VSEC telemetry, EDAC, QAT, SR-IOV, etc.
Allow use of ECAM for extended config space when the region is covered by
an EfiMemoryMappedIO region, even if it's not included in E820 or PNP0C02
_CRS.
This commit introduced an init sequence from downstream DT [1] in the
driver. As mentioned by the comment above the HSPHY_INIT_CFG macro for
this sequence:
/*
* The macro is used to define an initialization sequence. Each tuple
* is meant to program 'value' into phy register at 'offset' with 'delay'
* in us followed.
*/
Instead of corresponding to offsets into the phy register, the sequence
read by the downstream driver [2] is passed into ulpi_write [3] which
crafts the address-value pair into a new value and writes it into the
same register at USB_ULPI_VIEWPORT [4]. In other words, this init
sequence is programmed into the hardware in a totally different way than
downstream and is unlikely to achieve the desired result, if the hsphy
is working at all.
An alternative method needs to be found to write these init values at
the desired location. Fortunately mdm9607 did not land upstream yet [5]
and should have its compatible revised to use the generic one, instead
of a compatible that writes wrong data to the wrong registers.
Maxime Ripard [Fri, 13 Jan 2023 15:46:37 +0000 (16:46 +0100)]
drm/vc4: bo: Fix unused variable warning
Commit 07a2975c65f2 ("drm/vc4: bo: Fix drmm_mutex_init memory hog")
removed the only use of the ret variable, but didn't remove the
variable itself leading to a unused variable warning.
Linus Torvalds [Fri, 13 Jan 2023 16:35:26 +0000 (10:35 -0600)]
Merge tag 'docs-6.2-fixes' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"Three documentation fixes (or rather two and one warning):
- Sphinx 6.0 broke our configuration mechanism, so fix it
- I broke our configuration for non-Alabaster themes; Akira fixed it
- Deprecate Sphinx < 2.4 with an eye toward future removal"
* tag 'docs-6.2-fixes' of git://git.lwn.net/linux:
docs/conf.py: Use about.html only in sidebar of alabaster theme
docs: Deprecate use of Sphinx < 2.4.x
docs: Fix the docs build with Sphinx 6.0
Luis Gerhorst [Mon, 9 Jan 2023 15:05:46 +0000 (16:05 +0100)]
bpf: Fix pointer-leak due to insufficient speculative store bypass mitigation
To mitigate Spectre v4, 2039f26f3aca ("bpf: Fix leakage due to
insufficient speculative store bypass mitigation") inserts lfence
instructions after 1) initializing a stack slot and 2) spilling a
pointer to the stack.
However, this does not cover cases where a stack slot is first
initialized with a pointer (subject to sanitization) but then
overwritten with a scalar (not subject to sanitization because
the slot was already initialized). In this case, the second write
may be subject to speculative store bypass (SSB) creating a
speculative pointer-as-scalar type confusion. This allows the
program to subsequently leak the numerical pointer value using,
for example, a branch-based cache side channel.
To fix this, also sanitize scalars if they write a stack slot
that previously contained a pointer. Assuming that pointer-spills
are only generated by LLVM on register-pressure, the performance
impact on most real-world BPF programs should be small.
The following unprivileged BPF bytecode drafts a minimal exploit
and the mitigation:
[...]
// r6 = 0 or 1 (skalar, unknown user input)
// r7 = accessible ptr for side channel
// r10 = frame pointer (fp), to be leaked
//
r9 = r10 # fp alias to encourage ssb
*(u64 *)(r9 - 8) = r10 // fp[-8] = ptr, to be leaked
// lfence added here because of pointer spill to stack.
//
// Ommitted: Dummy bpf_ringbuf_output() here to train alias predictor
// for no r9-r10 dependency.
//
*(u64 *)(r10 - 8) = r6 // fp[-8] = scalar, overwrites ptr
// 2039f26f3aca: no lfence added because stack slot was not STACK_INVALID,
// store may be subject to SSB
//
// fix: also add an lfence when the slot contained a ptr
//
r8 = *(u64 *)(r9 - 8)
// r8 = architecturally a scalar, speculatively a ptr
//
// leak ptr using branch-based cache side channel:
r8 &= 1 // choose bit to leak
if r8 == 0 goto SLOW // no mispredict
// architecturally dead code if input r6 is 0,
// only executes speculatively iff ptr bit is 1
r8 = *(u64 *)(r7 + 0) # encode bit in cache (0: slow, 1: fast)
SLOW:
[...]
After running this, the program can time the access to *(r7 + 0) to
determine whether the chosen pointer bit was 0 or 1. Repeat this 64
times to recover the whole address on amd64.
In summary, sanitization can only be skipped if one scalar is
overwritten with another scalar. Scalar-confusion due to speculative
store bypass can not lead to invalid accesses because the pointer
bounds deducted during verification are enforced using branchless
logic. See 979d63d50c0c ("bpf: prevent out of bounds speculation on
pointer arithmetic") for details.
Do not make the mitigation depend on !env->allow_{uninit_stack,ptr_leaks}
because speculative leaks are likely unexpected if these were enabled.
For example, leaking the address to a protected log file may be acceptable
while disabling the mitigation might unintentionally leak the address
into the cached-state of a map that is accessible to unprivileged
processes.
Ard Biesheuvel [Mon, 9 Jan 2023 09:44:31 +0000 (10:44 +0100)]
efi: tpm: Avoid READ_ONCE() for accessing the event log
Nathan reports that recent kernels built with LTO will crash when doing
EFI boot using Fedora's GRUB and SHIM. The culprit turns out to be a
misaligned load from the TPM event log, which is annotated with
READ_ONCE(), and under LTO, this gets translated into a LDAR instruction
which does not tolerate misaligned accesses.
Interestingly, this does not happen when booting the same kernel
straight from the UEFI shell, and so the fact that the event log may
appear misaligned in memory may be caused by a bug in GRUB or SHIM.
However, using READ_ONCE() to access firmware tables is slightly unusual
in any case, and here, we only need to ensure that 'event' is not
dereferenced again after it gets unmapped, but this is already taken
care of by the implicit barrier() semantics of the early_memunmap()
call.
There is no real problem for normal IOPOLL as flush is also called with
uring_lock taken, but it's getting more complicated for IOPOLL|SQPOLL,
for which __io_cqring_overflow_flush() happens from the CQ waiting path.
Linus Torvalds [Fri, 13 Jan 2023 14:20:29 +0000 (08:20 -0600)]
Merge tag 'sound-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This became a slightly big update, but it's more or less expected, as
the first batch after holidays.
All changes (but for the last two last-minute fixes) have been stewed
in linux-next long enough, so it's fairly safe to take:
- PCM UAF fix in 32bit compat layer
- ASoC board-specific fixes for Intel, AMD, Medathek, Qualcomm
- SOF power management fixes
- ASoC Intel link failure fixes
- A series of fixes for USB-audio regressions
- CS35L41 HD-audio codec regression fixes
- HD-audio device-specific fixes / quirks
Note that one SPI patch has been taken in ASoC subtree mistakenly, and
the same fix is found in spi tree, but it should be OK to apply"
* tag 'sound-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (39 commits)
ALSA: pcm: Move rwsem lock inside snd_ctl_elem_read to prevent UAF
ALSA: usb-audio: Fix possible NULL pointer dereference in snd_usb_pcm_has_fixed_rate()
ALSA: hda/realtek: Enable mute/micmute LEDs on HP Spectre x360 13-aw0xxx
ASoC: fsl-asoc-card: Fix naming of AC'97 CODEC widgets
ASoC: fsl_ssi: Rename AC'97 streams to avoid collisions with AC'97 CODEC
ALSA: hda/hdmi: Add a HP device 0x8715 to force connect list
ALSA: control-led: use strscpy in set_led_id()
ALSA: usb-audio: Always initialize fixed_rate in snd_usb_find_implicit_fb_sync_format()
ASoC: dt-bindings: qcom,lpass-tx-macro: correct clocks on SC7280
ASoC: dt-bindings: qcom,lpass-wsa-macro: correct clocks on SM8250
ASoC: qcom: Fix building APQ8016 machine driver without SOUNDWIRE
ALSA: hda: cs35l41: Check runtime suspend capability at runtime_idle
ALSA: hda: cs35l41: Don't return -EINVAL from system suspend/resume
ASoC: fsl_micfil: Correct the number of steps on SX controls
ALSA: hda/realtek: fix mute/micmute LEDs don't work for a HP platform
Revert "ALSA: usb-audio: Drop superfluous interface setup at parsing"
ALSA: usb-audio: More refactoring of hw constraint rules
ALSA: usb-audio: Relax hw constraints for implicit fb sync
ALSA: usb-audio: Make sure to stop endpoints before closing EPs
ALSA: hda - Enable headset mic on another Dell laptop with ALC3254
...
Paul E. McKenney [Fri, 13 Jan 2023 14:08:04 +0000 (23:08 +0900)]
tomoyo: Remove "select SRCU"
Now that the SRCU Kconfig option is unconditionally selected, there is
no longer any point in selecting it. Therefore, remove the "select SRCU"
Kconfig statements.
Linus Torvalds [Fri, 13 Jan 2023 13:38:14 +0000 (07:38 -0600)]
Merge tag 'pm-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix assorted issues in the ARM cpufreq drivers and in the AMD
P-state driver.
Specifics:
- Fix cpufreq policy reference counting in amd-pstate to prevent it
from crashing on removal (Perry Yuan)
- Fix double initialization and set suspend-freq for Apple's cpufreq
driver (Arnd Bergmann, Hector Martin)
- Fix reading of "reg" property, update cpufreq-dt's blocklist and
update DT documentation for Qualcomm's cpufreq driver (Konrad
Dybcio, Krzysztof Kozlowski)
- Replace 0 with NULL in the Armada cpufreq driver (Miles Chen)
- Fix potential overflows in the CPPC cpufreq driver (Pierre Gondois)
- Update blocklist for the Tegra234 Soc cpufreq driver (Sumit Gupta)"
* tag 'pm-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: amd-pstate: fix kernel hang issue while amd-pstate unregistering
cpufreq: armada-37xx: stop using 0 as NULL pointer
cpufreq: apple-soc: Switch to the lowest frequency on suspend
dt-bindings: cpufreq: cpufreq-qcom-hw: document interrupts
cpufreq: Add SM6375 to cpufreq-dt-platdev blocklist
cpufreq: Add Tegra234 to cpufreq-dt-platdev blocklist
cpufreq: qcom-hw: Fix reading "reg" with address/size-cells != 2
cpufreq: CPPC: Add u64 casts to avoid overflowing
cpufreq: apple: remove duplicate intializer
Linus Torvalds [Fri, 13 Jan 2023 13:32:55 +0000 (07:32 -0600)]
Merge tag 'acpi-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These add one more ACPI IRQ override quirk, improve ACPI companion
lookup for backlight devices and add missing kernel command line
option values for backlight detection.
Specifics:
- Improve ACPI companion lookup for backlight devices in the cases
when there is more than one candidate ACPI device object (Hans de
Goede)
- Add missing support for manual selection of NVidia-WMI-EC or Apple
GMUX backlight in the kernel command line to the ACPI backlight
driver (Hans de Goede)
- Skip ACPI IRQ override on Asus Expertbook B2402CBA (Tamim Khan)"
* tag 'acpi-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: Fix selecting wrong ACPI fwnode for the iGPU on some Dell laptops
ACPI: video: Allow selecting NVidia-WMI-EC or Apple GMUX backlight from the cmdline
ACPI: resource: Skip IRQ override on Asus Expertbook B2402CBA
Linus Torvalds [Fri, 13 Jan 2023 13:26:40 +0000 (07:26 -0600)]
Merge tag 'platform-drivers-x86-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"A set of assorted fixes and hardware-id additions"
* tag 'platform-drivers-x86-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad_acpi: Fix profile mode display in AMT mode
platform/x86: int3472/discrete: Ensure the clk/power enable pins are in output mode
platform/x86/amd: Fix refcount leak in amd_pmc_probe
platform/x86: intel/pmc/core: Add Meteor Lake mobile support
platform/x86: simatic-ipc: add another model
platform/x86: simatic-ipc: correct name of a model
platform/x86: dell-privacy: Only register SW_CAMERA_LENS_COVER if present
platform/x86: dell-privacy: Fix SW_CAMERA_LENS_COVER reporting
platform/x86: asus-wmi: Don't load fan curves without fan
platform/x86: asus-wmi: Ignore fan on E410MA
platform/x86: asus-wmi: Add quirk wmi_ignore_fan
platform/x86: asus-nb-wmi: Add alternate mapping for KEY_SCREENLOCK
platform/x86: asus-nb-wmi: Add alternate mapping for KEY_CAMERA
platform/surface: aggregator: Add missing call to ssam_request_sync_free()
platform/surface: aggregator: Ignore command messages not intended for us
platform/x86: touchscreen_dmi: Add info for the CSL Panther Tab HD
platform/x86: ideapad-laptop: Add Legion 5 15ARH05 DMI id to set_fn_lock_led_list[]
platform/x86: sony-laptop: Don't turn off 0x153 keyboard backlight during probe
Linus Torvalds [Fri, 13 Jan 2023 13:18:59 +0000 (07:18 -0600)]
Merge tag 'drm-fixes-2023-01-13' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"There is a bit of a post-holiday build up here I expect, small fixes
across the board, amdgpu and msm being the main leaders, with others
having a few. One code removal patch for nouveau:
buddy:
- benchmark regression fix for top-down buddy allocation
panel:
- add Lenovo panel orientation quirk
ttm:
- fix kernel oops regression
amdgpu:
- fix missing fence references
- fix missing pipeline sync fencing
- SMU13 fan speed fix
- SMU13 fix power cap handling
- SMU13 BACO fix
- Fix a possible segfault in bo validation error case
- Delay removal of firmware framebuffer
- Fix error when unloading
amdkfd:
- SVM fix when clearing vram
- GC11 fix for multi-GPU
i915:
- Reserve enough fence slot for i915_vma_unbind_vsync
- Fix potential use after free
- Reset engines twice in case of reset failure
- Use multi-cast registers for SVG Unit registers
msm:
- display:
- doc warning fixes
- dt attribs cleanups
- memory leak fix
- error handing in hdmi probe fix
- dp_aux_isr incorrect signalling fix
- shutdown path fix
- accel:
- a5xx: fix quirks to be a bitmask
- a6xx: fix gx halt to avoid 1s hang
- kexec shutdown fix
- fix potential double free
vmwgfx:
- drop rcu usage to make code more robust
virtio:
- fix use-after-free in gem handle code
nouveau:
- drop unused nouveau_fbcon.c"
* tag 'drm-fixes-2023-01-13' of git://anongit.freedesktop.org/drm/drm: (35 commits)
drm: Optimize drm buddy top-down allocation method
drm/ttm: Fix a regression causing kernel oops'es
drm/i915/gt: Cover rest of SVG unit MCR registers
drm/nouveau: Remove file nouveau_fbcon.c
drm/amdkfd: Fix NULL pointer error for GC 11.0.1 on mGPU
drm/amd/pm/smu13: BACO is supported when it's in BACO state
drm/amdkfd: Add sync after creating vram bo
drm/i915/gt: Reset twice
drm/amdgpu: fix pipeline sync v2
drm/vmwgfx: Remove rcu locks from user resources
drm/virtio: Fix GEM handle creation UAF
drm/amdgpu: Fixed bug on error when unloading amdgpu
drm/amd: Delay removal of the firmware framebuffer
drm/amdgpu: Fix potential NULL dereference
drm/i915: Fix potential context UAFs
drm/i915: Reserve enough fence slot for i915_vma_unbind_async
drm: Add orientation quirk for Lenovo ideapad D330-10IGL
drm/msm/a6xx: Avoid gx gbit halt during rpm suspend
drm/msm/adreno: Make adreno quirks not overwrite each other
drm/msm: another fix for the headless Adreno GPU
...
Clement Lecigne [Fri, 13 Jan 2023 12:07:45 +0000 (13:07 +0100)]
ALSA: pcm: Move rwsem lock inside snd_ctl_elem_read to prevent UAF
Takes rwsem lock inside snd_ctl_elem_read instead of snd_ctl_elem_read_user
like it was done for write in commit 1fa4445f9adf1 ("ALSA: control - introduce
snd_ctl_notify_one() helper"). Doing this way we are also fixing the following
locking issue happening in the compat path which can be easily triggered and
turned into an use-after-free.
Linus Torvalds [Fri, 13 Jan 2023 13:11:45 +0000 (07:11 -0600)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Here's a sizeable batch of Friday the 13th arm64 fixes for -rc4. What
could possibly go wrong?
The obvious reason we have so much here is because of the holiday
season right after the merge window, but we've also brought back an
erratum workaround that was previously dropped at the last minute and
there's an MTE coredumping fix that strays outside of the arch/arm64
directory.
Summary:
- Fix PAGE_TABLE_CHECK failures on hugepage splitting path
- Fix PSCI encoding of MEM_PROTECT_RANGE function in UAPI header
- Fix NULL deref when accessing debugfs node if PSCI is not present
- Fix MTE core dumping when VMA list is being updated concurrently
- Fix SME signal frame handling when SVE is not implemented by the
CPU
- Fix asm constraints for cmpxchg_double() to hazard both words
- Fix build failure with stack tracer and older versions of Clang
- Bring back workaround for Cortex-A715 erratum 2645198"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Fix build with CC=clang, CONFIG_FTRACE=y and CONFIG_STACK_TRACER=y
arm64/mm: Define dummy pud_user_exec() when using 2-level page-table
arm64: errata: Workaround possible Cortex-A715 [ESR|FAR]_ELx corruption
firmware/psci: Don't register with debugfs if PSCI isn't available
firmware/psci: Fix MEM_PROTECT_RANGE function numbers
arm64/signal: Always allocate SVE signal frames on SME only systems
arm64/signal: Always accept SVE signal frames on SME only systems
arm64/sme: Fix context switch for SME only systems
arm64: cmpxchg_double*: hazard against entire exchange variable
arm64/uprobes: change the uprobe_opcode_t typedef to fix the sparse warning
arm64: mte: Avoid the racy walk of the vma list during core dump
elfcore: Add a cprm parameter to elf_core_extra_{phdrs,data_size}
arm64: mte: Fix double-freeing of the temporary tag storage during coredump
arm64: ptrace: Use ARM64_SME to guard the SME register enumerations
arm64/mm: add pud_user_exec() check in pud_user_accessible_page()
arm64/mm: fix incorrect file_map_count for invalid pmd
Yunfei Wang [Wed, 11 Jan 2023 06:38:00 +0000 (14:38 +0800)]
iommu/iova: Fix alloc iova overflows issue
In __alloc_and_insert_iova_range, there is an issue that retry_pfn
overflows. The value of iovad->anchor.pfn_hi is ~0UL, then when
iovad->cached_node is iovad->anchor, curr_iova->pfn_hi + 1 will
overflow. As a result, if the retry logic is executed, low_pfn is
updated to 0, and then new_pfn < low_pfn returns false to make the
allocation successful.
This issue occurs in the following two situations:
1. The first iova size exceeds the domain size. When initializing
iova domain, iovad->cached_node is assigned as iovad->anchor. For
example, the iova domain size is 10M, start_pfn is 0x1_F000_0000,
and the iova size allocated for the first time is 11M. The
following is the log information, new->pfn_lo is smaller than
iovad->cached_node.
Example log as follows:
[ 223.798112][T1705487] sh: [name:iova&]__alloc_and_insert_iova_range
start_pfn:0x1f0000,retry_pfn:0x0,size:0xb00,limit_pfn:0x1f0a00
[ 223.799590][T1705487] sh: [name:iova&]__alloc_and_insert_iova_range
success start_pfn:0x1f0000,new->pfn_lo:0x1efe00,new->pfn_hi:0x1f08ff
2. The node with the largest iova->pfn_lo value in the iova domain
is deleted, iovad->cached_node will be updated to iovad->anchor,
and then the alloc iova size exceeds the maximum iova size that can
be allocated in the domain.
After judging that retry_pfn is less than limit_pfn, call retry_pfn+1
to fix the overflow issue.
Vladimir Oltean [Thu, 15 Dec 2022 14:12:51 +0000 (16:12 +0200)]
iommu/arm-smmu-v3: Don't unregister on shutdown
Similar to SMMUv2, this driver calls iommu_device_unregister() from the
shutdown path, which removes the IOMMU groups with no coordination
whatsoever with their users - shutdown methods are optional in device
drivers. This can lead to NULL pointer dereferences in those drivers'
DMA API calls, or worse.
Instead of calling the full arm_smmu_device_remove() from
arm_smmu_device_shutdown(), let's pick only the relevant function call -
arm_smmu_device_disable() - more or less the reverse of
arm_smmu_device_reset() - and call just that from the shutdown path.
Vladimir Oltean [Thu, 15 Dec 2022 14:12:50 +0000 (16:12 +0200)]
iommu/arm-smmu: Don't unregister on shutdown
Michael Walle says he noticed the following stack trace while performing
a shutdown with "reboot -f". He suggests he got "lucky" and just hit the
correct spot for the reboot while there was a packet transmission in
flight.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098
CPU: 0 PID: 23 Comm: kworker/0:1 Not tainted 6.1.0-rc5-00088-gf3600ff8e322 #1930
Hardware name: Kontron KBox A-230-LS (DT)
pc : iommu_get_dma_domain+0x14/0x20
lr : iommu_dma_map_page+0x9c/0x254
Call trace:
iommu_get_dma_domain+0x14/0x20
dma_map_page_attrs+0x1ec/0x250
enetc_start_xmit+0x14c/0x10b0
enetc_xmit+0x60/0xdc
dev_hard_start_xmit+0xb8/0x210
sch_direct_xmit+0x11c/0x420
__dev_queue_xmit+0x354/0xb20
ip6_finish_output2+0x280/0x5b0
__ip6_finish_output+0x15c/0x270
ip6_output+0x78/0x15c
NF_HOOK.constprop.0+0x50/0xd0
mld_sendpack+0x1bc/0x320
mld_ifc_work+0x1d8/0x4dc
process_one_work+0x1e8/0x460
worker_thread+0x178/0x534
kthread+0xe0/0xe4
ret_from_fork+0x10/0x20
Code: d503201ff9416800d503233fd50323bf (f9404c00)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception in interrupt
This appears to be reproducible when the board has a fixed IP address,
is ping flooded from another host, and "reboot -f" is used.
The following is one more manifestation of the issue:
$ reboot -f
kvm: exiting hardware virtualization
cfg80211: failed to load regulatory.db
arm-smmu 5000000.iommu: disabling translation
sdhci-esdhc 2140000.mmc: Removing from iommu group 11
sdhci-esdhc 2150000.mmc: Removing from iommu group 12
fsl-edma 22c0000.dma-controller: Removing from iommu group 17
dwc3 3100000.usb: Removing from iommu group 9
dwc3 3110000.usb: Removing from iommu group 10
ahci-qoriq 3200000.sata: Removing from iommu group 2
fsl-qdma 8380000.dma-controller: Removing from iommu group 20
platform f080000.display: Removing from iommu group 0
etnaviv-gpu f0c0000.gpu: Removing from iommu group 1
etnaviv etnaviv: Removing from iommu group 1
caam_jr 8010000.jr: Removing from iommu group 13
caam_jr 8020000.jr: Removing from iommu group 14
caam_jr 8030000.jr: Removing from iommu group 15
caam_jr 8040000.jr: Removing from iommu group 16
fsl_enetc 0000:00:00.0: Removing from iommu group 4
arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications
arm-smmu 5000000.iommu: GFSR 0x80000002, GFSYNR0 0x00000002, GFSYNR1 0x00000429, GFSYNR2 0x00000000
fsl_enetc 0000:00:00.1: Removing from iommu group 5
arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications
arm-smmu 5000000.iommu: GFSR 0x80000002, GFSYNR0 0x00000002, GFSYNR1 0x00000429, GFSYNR2 0x00000000
arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications
arm-smmu 5000000.iommu: GFSR 0x80000002, GFSYNR0 0x00000000, GFSYNR1 0x00000429, GFSYNR2 0x00000000
fsl_enetc 0000:00:00.2: Removing from iommu group 6
fsl_enetc_mdio 0000:00:00.3: Removing from iommu group 8
mscc_felix 0000:00:00.5: Removing from iommu group 3
fsl_enetc 0000:00:00.6: Removing from iommu group 7
pcieport 0001:00:00.0: Removing from iommu group 18
arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications
arm-smmu 5000000.iommu: GFSR 0x00000002, GFSYNR0 0x00000000, GFSYNR1 0x00000429, GFSYNR2 0x00000000
pcieport 0002:00:00.0: Removing from iommu group 19
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a8
pc : iommu_get_dma_domain+0x14/0x20
lr : iommu_dma_unmap_page+0x38/0xe0
Call trace:
iommu_get_dma_domain+0x14/0x20
dma_unmap_page_attrs+0x38/0x1d0
enetc_unmap_tx_buff.isra.0+0x6c/0x80
enetc_poll+0x170/0x910
__napi_poll+0x40/0x1e0
net_rx_action+0x164/0x37c
__do_softirq+0x128/0x368
run_ksoftirqd+0x68/0x90
smpboot_thread_fn+0x14c/0x190
Code: d503201ff9416800d503233fd50323bf (f9405400)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception in interrupt
---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]---
The problem seems to be that iommu_group_remove_device() is allowed to
run with no coordination whatsoever with the shutdown procedure of the
enetc PCI device. In fact, it almost seems as if it implies that the
pci_driver :: shutdown() method is mandatory if DMA is used with an
IOMMU, otherwise this is inevitable. That was never the case; shutdown
methods are optional in device drivers.
This is the call stack that leads to iommu_group_remove_device() during
reboot:
I don't know much about the arm_smmu driver, but
arm_smmu_device_shutdown() invoking arm_smmu_device_remove() looks
suspicious, since it causes the IOMMU device to unregister and that's
where everything starts to unravel. It forces all other devices which
depend on IOMMU groups to also point their ->shutdown() to ->remove(),
which will make reboot slower overall.
There are 2 moments relevant to this behavior. First was commit b06c076ea962 ("Revert "iommu/arm-smmu: Make arm-smmu explicitly
non-modular"") when arm_smmu_device_shutdown() was made to run the exact
same thing as arm_smmu_device_remove(). Prior to that, there was no
iommu_device_unregister() call in arm_smmu_device_shutdown(). However,
that was benign until commit 57365a04c921 ("iommu: Move bus setup to
IOMMU device registration"), which made iommu_device_unregister() call
remove_iommu_group().
Restore the old shutdown behavior by making remove() call shutdown(),
but shutdown() does not call the remove() specific bits.
Robin Murphy [Thu, 15 Dec 2022 16:51:55 +0000 (16:51 +0000)]
iommu/arm-smmu: Report IOMMU_CAP_CACHE_COHERENCY even betterer
Although it's vanishingly unlikely that anyone would integrate an SMMU
within a coherent interconnect without also making the pagetable walk
interface coherent, the same effect happens if a coherent SMMU fails to
advertise CTTW correctly. This turns out to be the case on some popular
NXP SoCs, where VFIO started failing the IOMMU_CAP_CACHE_COHERENCY test,
even though IOMMU_CACHE *was* previously achieving the desired effect
anyway thanks to the underlying integration.
While those SoCs stand to gain some more general benefits from a
firmware update to override CTTW correctly in DT/ACPI, it's also easy
to work around this in Linux as well, to avoid imposing too much on
affected users - since the upstream client devices *are* correctly
marked as coherent, we can trivially infer their coherent paths through
the SMMU as well.
Mark Pearson [Thu, 12 Jan 2023 22:12:28 +0000 (17:12 -0500)]
platform/x86: thinkpad_acpi: Fix profile mode display in AMT mode
Recently AMT mode was enabled (somewhat unexpectedly) on the Lenovo
Z13 platform. The FW is advertising it is available and the driver tries
to use it - unfortunately it reports the profile mode incorrectly.
Note, there is also some extra work needed to enable the dynamic aspect
of AMT support that I will be following up with; but more testing is
needed first. This patch just fixes things so the profiles are reported
correctly.
Merge an ACPI resource management quirk and an ACPI backlight driver fix
for 6.2-rc4:
- Skip ACPI IRQ override on Asus Expertbook B2402CBA (Tamim Khan).
- Add missing support for manual selection of NVidia-WMI-EC or Apple
GMUX backlight in the kernel command line to the ACPI backlight
driver (Hans de Goede).
* acpi-resource:
ACPI: resource: Skip IRQ override on Asus Expertbook B2402CBA
* acpi-video:
ACPI: video: Allow selecting NVidia-WMI-EC or Apple GMUX backlight from the cmdline
ethtool: add netlink attr in rss get reply only if value is not null
Current code for RSS_GET ethtool command includes netlink attributes
in reply message to user space even if they are null. Added checks
to include netlink attribute in reply message only if a value is
received from driver. Drivers might return null for RSS indirection
table or hash key. Instead of including attributes with empty value
in the reply message, add netlink attribute only if there is content.
Jakub Kicinski [Fri, 13 Jan 2023 05:50:43 +0000 (21:50 -0800)]
Merge branch 'amd-xgbe-pfc-and-kr-training-fixes'
Raju Rangoju says:
====================
amd-xgbe: PFC and KR-Training fixes
This patch series fixes the issues in kr-training and pfc
0001 - There is difference in the TX Flow Control registers (TFCR)
between the revisions of the hardware. Update the driver to use the
TFCR based on the reported version of the hardware.
0002 - AN restart triggered during KR training not only aborts the KR
training process but also move the HW to unstable state. Add the
necessary changes to fix kr-taining.
====================
Raju Rangoju [Wed, 11 Jan 2023 17:28:52 +0000 (22:58 +0530)]
amd-xgbe: Delay AN timeout during KR training
AN restart triggered during KR training not only aborts the KR training
process but also move the HW to unstable state. Driver has to wait upto
500ms or until the KR training is completed before restarting AN cycle.
Raju Rangoju [Wed, 11 Jan 2023 17:28:51 +0000 (22:58 +0530)]
amd-xgbe: TX Flow Ctrl Registers are h/w ver dependent
There is difference in the TX Flow Control registers (TFCR) between the
revisions of the hardware. The older revisions of hardware used to have
single register per queue. Whereas, the newer revision of hardware (from
ver 30H onwards) have one register per priority.
Update the driver to use the TFCR based on the reported version of the
hardware.
Jakub Kicinski [Fri, 13 Jan 2023 04:01:44 +0000 (20:01 -0800)]
Merge tag 'wireless-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Some fixes, stack only for now:
* iTXQ conversion fixes, various bugs reported
* properly reset multiple BSSID settings
* fix for a link_sta crash
* fix for AP VLAN checks
* fix for MLO address translation
* tag 'wireless-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: fix MLO + AP_VLAN check
mac80211: Fix MLO address translation for multiple bss case
wifi: mac80211: reset multiple BSSID options in stop_ap()
wifi: mac80211: Fix iTXQ AMPDU fragmentation handling
wifi: mac80211: sdata can be NULL during AMPDU start
wifi: mac80211: Proper mark iTXQs for resumption
wifi: mac80211: fix initialization of rx->link and rx->link_sta
====================
Dave Airlie [Fri, 13 Jan 2023 03:01:22 +0000 (13:01 +1000)]
Merge tag 'drm-msm-fixes-2023-01-12' of https://gitlab.freedesktop.org/drm/msm into drm-fixes
msm-fixes for v6.3-rc4
Display Fixes:
- Fix the documentation for dpu_encoder_phys_wb_init() and
dpu_encoder_phys_wb_setup_fb() APIs to address doc warnings
- Remove vcca-supply and vdds-supply as mandatory for 14nm PHY and
10nm PHY DT schemas respectively as they are not present on some
SOCs using these PHYs
- Add the dsi-phy-regulator-ldo-mode to dsi-phy-28nm.yaml as it was
missed out during txt to yaml migration
- Remove operating-points-v2 and power-domain as a required property
for the DSI controller as thats not the case for every SOC
- Fix the description from display escape clock to display core
clock in the dsi controller yaml
- Fix the memory leak for mdp1-mem path for the cases when we return
early after failing to get mdp0-mem ICC paths for msm
- Fix error handling path in msm_hdmi_dev_probe() to release the phy
ref count when devm_pm_runtime_enable() fails
- Fix the dp_aux_isr() routine to make sure it doesnt incorrectly
signal the aux transaction as complete if the ISR was not an AUX
isr. This fixes a big hitter stability bug on chromebooks.
- Add protection against null pointer dereference when there is no
kms object as in the case of headless adreno GPU in the shutdown
path.
GPU Fixes:
- a5xx: fix quirks to actually be a bitmask and not overwrite each
other
- a6xx: fix gx halt sequence to avoid 1000ms hang on some devices
- kexec shutdown fix
- fix potential double free
Tonghao Zhang [Wed, 11 Jan 2023 09:29:01 +0000 (17:29 +0800)]
bpf: hash map, avoid deadlock with suitable hash mask
The deadlock still may occur while accessed in NMI and non-NMI
context. Because in NMI, we still may access the same bucket but with
different map_locked index.
For example, on the same CPU, .max_entries = 2, we update the hash map,
with key = 4, while running bpf prog in NMI nmi_handle(), to update
hash map with key = 20, so it will have the same bucket index but have
different map_locked index.
Dave Airlie [Fri, 13 Jan 2023 02:44:21 +0000 (12:44 +1000)]
Merge tag 'drm-intel-fixes-2023-01-12' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Reserve enough fence slot for i915_vma_unbind_vsync (Nirmoy)
- Fix potential use after free (Rob Clark)
- Reset engines twice in case of reset failure (Chris)
- Use multi-cast registers for SVG Unit registers (Gustavo)
Dave Airlie [Fri, 13 Jan 2023 02:37:24 +0000 (12:37 +1000)]
Merge tag 'amd-drm-fixes-6.2-2023-01-11' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.2-2023-01-11:
amdgpu:
- SMU13 fan speed fix
- SMU13 fix power cap handling
- SMU13 BACO fix
- Fix a possible segfault in bo validation error case
- Delay removal of firmware framebuffer
- Fix error when unloading
amdkfd:
- SVM fix when clearing vram
- GC11 fix for multi-GPU
Dave Airlie [Fri, 13 Jan 2023 01:44:54 +0000 (11:44 +1000)]
Merge tag 'drm-misc-fixes-2023-01-12' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Several fixes for amdgpu (all addressing issues with fences), yet
another orientation quirk for a Lenovo device, a use-after-free fix for
virtio, a regression fix in TTM and a performance regression in drm
buddy.
Linus Torvalds [Fri, 13 Jan 2023 00:20:44 +0000 (18:20 -0600)]
Merge tag 'net-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from rxrpc.
The rxrpc changes are noticeable large: to address a recent regression
has been necessary completing the threaded refactor.
Current release - regressions:
- rxrpc:
- only disconnect calls in the I/O thread
- move client call connection to the I/O thread
- fix incoming call setup race
- eth: mlx5:
- restore pkt rate policing support
- fix memory leak on updating vport counters
Previous releases - regressions:
- gro: take care of DODGY packets
- ipv6: deduct extension header length in rawv6_push_pending_frames
- tipc: fix unexpected link reset due to discovery messages
Previous releases - always broken:
- sched: disallow noqueue for qdisc classes
- eth: ice: fix potential memory leak in ice_gnss_tty_write()
- eth: ixgbe: fix pci device refcount leak
- eth: mlx5:
- fix command stats access after free
- fix macsec possible null dereference when updating MAC security
entity (SecY)"
* tag 'net-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits)
r8152: add vendor/device ID pair for Microsoft Devkit
net: stmmac: add aux timestamps fifo clearance wait
bnxt: make sure we return pages to the pool
net: hns3: fix wrong use of rss size during VF rss config
ipv6: raw: Deduct extension header length in rawv6_push_pending_frames
net: lan966x: check for ptp to be enabled in lan966x_ptp_deinit()
net: sched: disallow noqueue for qdisc classes
iavf/iavf_main: actually log ->src mask when talking about it
igc: Fix PPS delta between two synchronized end-points
ixgbe: fix pci device refcount leak
octeontx2-pf: Fix resource leakage in VF driver unbind
selftests/net: l2_tos_ttl_inherit.sh: Ensure environment cleanup on failure.
selftests/net: l2_tos_ttl_inherit.sh: Run tests in their own netns.
selftests/net: l2_tos_ttl_inherit.sh: Set IPv6 addresses with "nodad".
net/mlx5e: Fix macsec possible null dereference when updating MAC security entity (SecY)
net/mlx5e: Fix macsec ssci attribute handling in offload path
net/mlx5: E-switch, Coverity: overlapping copy
net/mlx5e: Don't support encap rules with gbp option
net/mlx5: Fix ptp max frequency adjustment range
net/mlx5e: Fix memory leak on updating vport counters
...
Linus Torvalds [Thu, 12 Jan 2023 23:09:20 +0000 (17:09 -0600)]
Merge tag 's390-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Add various missing READ_ONCE() to cmpxchg() loops prevent the
compiler from potentially generating incorrect code. This includes a
rather large change to the s390 specific hardware sampling code and
its current use of cmpxchg_double().
Do the fix now to get it out of the way of Peter Zijlstra's
cmpxchg128() work, and have something that can be backported. The
added new code includes a private 128 bit cmpxchg variant which will
be removed again after Peter's rework is available. Also note that
this 128 bit cmpxchg variant is used to implement 128 bit
READ_ONCE(), while strictly speaking it wouldn't be necessary, and
_READ_ONCE() should also be sufficient; even though it isn't obvious
for all converted locations that this is the case. Therefore use this
implementation for for the sake of clarity and consistency for now.
- Fix ipl report address handling to avoid kdump failures/hangs.
- Fix misuse of #(el)if in kernel decompressor.
- Define RUNTIME_DISCARD_EXIT to fix link error with GNU ld < 2.36,
caused by the recently changed discard behaviour.
- Make sure _edata and _end symbols are always page aligned.
- The current header guard DEBUG_H in one of the s390 specific header
files is too generic and conflicts with the ath9k wireless driver.
Add an _ASM_S390_ prefix to the guard to make it unique.
- Update defconfigs.
* tag 's390-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: update defconfigs
KVM: s390: interrupt: use READ_ONCE() before cmpxchg()
s390/percpu: add READ_ONCE() to arch_this_cpu_to_op_simple()
s390/cpum_sf: add READ_ONCE() semantics to compare and swap loops
s390/kexec: fix ipl report address for kdump
s390: fix -Wundef warning for CONFIG_KERNEL_ZSTD
s390: define RUNTIME_DISCARD_EXIT to fix link error with GNU ld < 2.36
s390: expicitly align _edata and _end symbols on page boundary
s390/debug: add _ASM_S390_ prefix to header guard
Linus Torvalds [Thu, 12 Jan 2023 23:02:20 +0000 (17:02 -0600)]
Merge tag 'for-linus-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- two cleanup patches
- a fix of a memory leak in the Xen pvfront driver
- a fix of a locking issue in the Xen hypervisor console driver
* tag 'for-linus-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/pvcalls: free active map buffer on pvcalls_front_free_map
hvc/xen: lock console list traversal
x86/xen: Remove the unused function p2m_index()
xen: make remove callback of xen driver void returned
Linus Torvalds [Thu, 12 Jan 2023 22:47:32 +0000 (16:47 -0600)]
Merge tag 'perf-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events hw enablement from Ingo Molnar:
- More hardware-enablement for Intel Meteor Lake & Emerald Rapid
systems: pure model ID enumeration additions that do not affect other
systems.
* tag 'perf-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Add Emerald Rapids
perf/x86/msr: Add Emerald Rapids
perf/x86/msr: Add Meteor Lake support
perf/x86/cstate: Add Meteor Lake support
Linus Torvalds [Thu, 12 Jan 2023 22:39:43 +0000 (16:39 -0600)]
Merge tag 'sched-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix scheduler frequency invariance bug related to overly long
tickless periods triggering an integer overflow and disabling the
feature.
- Fix use-after-free bug in dup_user_cpus_ptr().
- Fix do_set_cpus_allowed() deadlock scenarios related to calling
kfree() with the pi_lock held. NOTE: the rcu_free() is the 'lazy'
solution here - we looked at patches to free the structure after the
pi_lock got dropped, but that looked quite a bit messier - and none
of this is truly performance critical. We can revisit this if it's
too lazy of a solution ...
* tag 'sched-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Use kfree_rcu() in do_set_cpus_allowed()
sched/core: Fix use-after-free bug in dup_user_cpus_ptr()
sched/core: Fix arch_scale_freq_tick() on tickless systems
Linus Torvalds [Thu, 12 Jan 2023 20:38:22 +0000 (14:38 -0600)]
Merge tag 'urgent-nolibc.2023.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull nolibc fixes from Paul McKenney:
- The fd_set structure was incorrectly defined as arrays of u32 instead
of long, which breaks BE64. Fix courtesy of Sven Schnelle.
- S_ISxxx macros were incorrectly testing the bits after applying them
instead of bitwise ANDing S_FMT with the value. Fix from Warner Losh.
- The mips code was randomly broken due to an unprotected "noreorder"
directive in the _start code that could prevent the assembler from
filling delayed slots. This in turn resulted in random other
instructions being placed into those slots. Fix courtesy of Willy
Tarreau.
- The current nolibc header layout refrains from including files that
are not explicitly included by the code using nolibc. Unfortunately,
this causes build failures when such files contain definitions that
are used (for example) by libgcc. Example definitions include raise()
and memset(), which are called by some architectures, but only at
certain optimization levels. Fix courtesy of Willy Tarreau.
- gcc 11.3 in ARM thumb2 mode at -O2 recognized a memset() construction
inside the memset() definition. The compiler replaced this
construction with a call to... memset(). Userland cannot be forced to
build with -ffreestanding, so an empty asm() statement was introduced
into the loop the loop in order to prevent the compiler from making
this unproductive transformation. Fix courtesy of Willy Tarreau.
- Most of the O_* macros were wrong on RISCV because their octal values
were coded as hexadecimal. This resulted in the getdents64() selftest
failing. Fix courtesy of Willy Tarreau.
This was tested on x86_64, i386, armv5, armv7, thumb1, thumb2, mips and
riscv, all at -O0, -Os and -O3.
* tag 'urgent-nolibc.2023.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
tools/nolibc: fix the O_* fcntl/open macro definitions for riscv
tools/nolibc: prevent gcc from making memset() loop over itself
tools/nolibc: fix missing includes causing build issues at -O0
tools/nolibc: restore mips branch ordering in the _start block
tools/nolibc: Fix S_ISxxx macros
nolibc: fix fd_set type
Hans de Goede [Wed, 11 Jan 2023 20:14:26 +0000 (21:14 +0100)]
platform/x86: int3472/discrete: Ensure the clk/power enable pins are in output mode
acpi_get_and_request_gpiod() does not take a gpio_lookup_flags argument
specifying that the pins direction should be initialized to a specific
value.
This means that in some cases the pins might be left in input mode, causing
the gpiod_set() calls made to enable the clk / regulator to not work.
One example of this problem is the clk-enable GPIO for the ov01a1s sensor
on a Dell Latitude 9420 being left in input mode causing the clk to
never get enabled.
Explicitly set the direction of the pins to output to fix this.
Miaoqian Lin [Thu, 29 Dec 2022 07:25:33 +0000 (11:25 +0400)]
platform/x86/amd: Fix refcount leak in amd_pmc_probe
pci_get_domain_bus_and_slot() takes reference, the caller should release
the reference by calling pci_dev_put() after use. Call pci_dev_put() in
the error path to fix this.
Adrian Huang [Tue, 10 Jan 2023 01:45:12 +0000 (09:45 +0800)]
md: fix incorrect declaration about claim_rdev in md_import_device
Commit fb541ca4c365 ("md: remove lock_bdev / unlock_bdev") removes
wrappers for blkdev_get/blkdev_put. However, the uninitialized local
static variable of pointer type 'claim_rdev' in md_import_device()
is NULL, which leads to the following warning call trace:
Hans de Goede [Wed, 21 Dec 2022 22:07:24 +0000 (23:07 +0100)]
platform/x86: dell-privacy: Only register SW_CAMERA_LENS_COVER if present
Unlike keys where userspace only reacts to keypresses, userspace may act
on switches in both (0 and 1) of their positions.
For example if a SW_TABLET_MODE switch is registered then GNOME will not
automatically show the onscreen keyboard when a text field gets focus on
touchscreen devices when SW_TABLET_MODE reports 0 and when SW_TABLET_MODE
reports 1 libinput will block (filter out) builtin keyboard and touchpad
events.
So to avoid unwanted side-effects EV_SW type inputs should only be
registered if they are actually present, only register SW_CAMERA_LENS_COVER
if it is actually there.
Use KE_VSW instead of KE_SW for the SW_CAMERA_LENS_COVER key_entry
and get the value of the switch from the status field when handling
SW_CAMERA_LENS_COVER events, instead of always reporting 0.
Also correctly set the initial SW_CAMERA_LENS_COVER value.
Thomas Weißschuh [Wed, 21 Dec 2022 17:59:49 +0000 (17:59 +0000)]
platform/x86: asus-wmi: Add quirk wmi_ignore_fan
Some laptops have a fan device listed in their ACPI tables but do not
actually contain a fan.
Introduce a quirk that can be used to override the fan detection logic.
This was observed with a ASUS VivoBook E410MA running firmware
E410MAB.304.
projects / linux.git / log