Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Many small changes across the subystem, some highlights:
- Usual driver cleanups in qedr, siw, erdma, hfi1, mlx4/5, irdma,
mthca, hns, and bnxt_re
- siw now works over tunnel and other netdevs with a MAC address by
removing assumptions about a MAC/GID from the connection manager
- "Doorbell Pacing" for bnxt_re - this is a best effort scheme to
allow userspace to slow down the doorbell rings if the HW gets full
- irdma egress VLAN priority, better QP/WQ sizing
- rxe bug fixes in queue draining and srq resizing
- Support more ethernet speed options in the core layer
- DMABUF support for bnxt_re
- Multi-stage MTT support for erdma to allow much bigger MR
registrations
- A irdma fix with a CVE that came in too late to go to -rc, missing
bounds checking for 0 length MRs"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (87 commits)
IB/hfi1: Reduce printing of errors during driver shut down
RDMA/hfi1: Move user SDMA system memory pinning code to its own file
RDMA/hfi1: Use list_for_each_entry() helper
RDMA/mlx5: Fix trailing */ formatting in block comment
RDMA/rxe: Fix redundant break statement in switch-case.
RDMA/efa: Fix wrong resources deallocation order
RDMA/siw: Call llist_reverse_order in siw_run_sq
RDMA/siw: Correct wrong debug message
RDMA/siw: Balance the reference of cep->kref in the error path
Revert "IB/isert: Fix incorrect release of isert connection"
RDMA/bnxt_re: Fix kernel doc errors
RDMA/irdma: Prevent zero-length STAG registration
RDMA/erdma: Implement hierarchical MTT
RDMA/erdma: Refactor the storage structure of MTT entries
RDMA/erdma: Renaming variable names and field names of struct erdma_mem
RDMA/hns: Support hns HW stats
RDMA/hns: Dump whole QP/CQ/MR resource in raw
RDMA/irdma: Add missing kernel-doc in irdma_setup_umode_qp()
RDMA/mlx4: Copy union directly
RDMA/irdma: Drop unused kernel push code
...
Merge tag 'x86-urgent-2023-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Dave Hansen:
"The most important fix here adds a missing CPU model to the recent
Gather Data Sampling (GDS) mitigation list to ensure that mitigations
are available on that CPU.
There are also a pair of warning fixes, and closure of a covert
channel that pops up when protection keys are disabled.
Summary:
- Mark all Skylake CPUs as vulnerable to GDS
- Fix PKRU covert channel
- Fix -Wmissing-variable-declarations warning for ia32_xyz_class
- Fix kernel-doc annotation warning"
* tag 'x86-urgent-2023-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu/xstate: Fix PKRU covert channel
x86/irq/i8259: Fix kernel-doc annotation warning
x86/speculation: Mark all Skylake CPUs as vulnerable to GDS
x86/audit: Fix -Wmissing-variable-declarations warning for ia32_xyz_class
- Show actual size of ring buffer after modifying the ring buffer
size via buffer_size_kb.
Currently it just returns what was written, but the actual size
rounds up to the sub buffer size. Show that real size instead.
Major changes:
- Added "eventfs". This is the code that handles the inodes and
dentries of tracefs/events directory. As there are thousands of
events, and each event has several inodes and dentries that
currently exist even when tracing is never used, they take up
precious memory. Instead, eventfs will allocate the inodes and
dentries in a JIT way (similar to what procfs does). There is now
metadata that handles the events and subdirectories, and will
create the inodes and dentries when they are used.
Note, I also have patches that remove the subdirectory meta data,
but will wait till the next merge window before applying them. It's
a little more complex, and I want to make sure the dynamic code
works properly before adding more complexity, making it easier to
revert if need be.
Minor changes:
- Optimization to user event list traversal
- Remove intermediate permission of tracefs files (note the
intermediate permission removes all access to the files so it is
not a security concern, but just a clean up)
- Add the complex fix to FORTIFY_SOURCE to the kernel stack event
logic
- Other minor cleanups"
* tag 'trace-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (29 commits)
tracefs: Remove kerneldoc from struct eventfs_file
tracefs: Avoid changing i_mode to a temp value
tracing/user_events: Optimize safe list traversals
ftrace: Remove empty declaration ftrace_enable_daemon() and ftrace_disable_daemon()
tracing: Remove unused function declarations
tracing/filters: Document cpumask filtering
tracing/filters: Further optimise scalar vs cpumask comparison
tracing/filters: Optimise CPU vs cpumask filtering when the user mask is a single CPU
tracing/filters: Optimise scalar vs cpumask filtering when the user mask is a single CPU
tracing/filters: Optimise cpumask vs cpumask filtering when user mask is a single CPU
tracing/filters: Enable filtering the CPU common field by a cpumask
tracing/filters: Enable filtering a scalar field by a cpumask
tracing/filters: Enable filtering a cpumask field by another cpumask
tracing/filters: Dynamically allocate filter_pred.regex
test: ftrace: Fix kprobe test for eventfs
eventfs: Move tracing/events to eventfs
eventfs: Implement removal of meta data from eventfs
eventfs: Implement functions to create files and dirs when accessed
eventfs: Implement eventfs lookup, read, open functions
eventfs: Implement eventfs file add functions
...
Merge tag 'wq-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue updates from Tejun Heo:
- Unbound workqueues now support more flexible affinity scopes.
The default behavior is to soft-affine according to last level cache
boundaries. A work item queued from a given LLC is executed by a
worker running on the same LLC but the worker may be moved across
cache boundaries as the scheduler sees fit. On machines which
multiple L3 caches, which are becoming more popular along with
chiplet designs, this improves cache locality while not harming work
conservation too much.
Unbound workqueues are now also a lot more flexible in terms of
execution affinity. Differeing levels of affinity scopes are
supported and both the default and per-workqueue affinity settings
can be modified dynamically. This should help working around amny of
sub-optimal behaviors observed recently with asymmetric ARM CPUs.
This involved signficant restructuring of workqueue code. Nothing was
reported yet but there's some risk of subtle regressions. Should keep
an eye out.
- Rescuer workers now has more identifiable comms.
- workqueue.unbound_cpus added so that CPUs which can be used by
workqueue can be constrained early during boot.
- Now that all the in-tree users have been flushed out, trigger warning
if system-wide workqueues are flushed.
* tag 'wq-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (31 commits)
workqueue: fix data race with the pwq->stats[] increment
workqueue: Rename rescuer kworker
workqueue: Make default affinity_scope dynamically updatable
workqueue: Add "Affinity Scopes and Performance" section to documentation
workqueue: Implement non-strict affinity scope for unbound workqueues
workqueue: Add workqueue_attrs->__pod_cpumask
workqueue: Factor out need_more_worker() check and worker wake-up
workqueue: Factor out work to worker assignment and collision handling
workqueue: Add multiple affinity scopes and interface to select them
workqueue: Modularize wq_pod_type initialization
workqueue: Add tools/workqueue/wq_dump.py which prints out workqueue configuration
workqueue: Generalize unbound CPU pods
workqueue: Factor out clearing of workqueue-only attrs fields
workqueue: Factor out actual cpumask calculation to reduce subtlety in wq_update_pod()
workqueue: Initialize unbound CPU pods later in the boot
workqueue: Move wq_pod_init() below workqueue_init()
workqueue: Rename NUMA related names to use pod instead
workqueue: Rename workqueue_attrs->no_numa to ->ordered
workqueue: Make unbound workqueues to use per-cpu pool_workqueues
workqueue: Call wq_update_unbound_numa() on all CPUs in NUMA node on CPU hotplug
...
Merge tag 'cgroup-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- Per-cpu cpu usage stats are now tracked
This currently isn't printed out in the cgroupfs interface and can
only be accessed through e.g. BPF. Should decide on a not-too-ugly
way to show per-cpu stats in cgroupfs
- cpuset received some cleanups and prepatory patches for the pending
cpus.exclusive patchset which will allow cpuset partitions to be
created below non-partition parents, which should ease the management
of partition cpusets
* tag 'cgroup-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (32 commits)
cgroup: Avoid -Wstringop-overflow warnings
cgroup:namespace: Remove unused cgroup_namespaces_init()
cgroup/rstat: Record the cumulative per-cpu time of cgroup and its descendants
cgroup: clean up if condition in cgroup_pidlist_start()
cgroup: fix obsolete function name in cgroup_destroy_locked()
Documentation: cgroup-v2.rst: Correct number of stats entries
cgroup: fix obsolete function name above css_free_rwork_fn()
cgroup/cpuset: fix kernel-doc
cgroup: clean up printk()
cgroup: fix obsolete comment above cgroup_create()
docs: cgroup-v1: fix typo
docs: cgroup-v1: correct the term of Page Cache organization in inode
cgroup/misc: Store atomic64_t reads to u64
cgroup/misc: Change counters to be explicit 64bit types
cgroup/misc: update struct members descriptions
cgroup: remove cgrp->kn check in css_populate_dir()
cgroup: fix obsolete function name
cgroup: use cached local variable parent in for loop
cgroup: remove obsolete comment above struct cgroupstats
cgroup: put cgroup_tryget_css() inside CONFIG_CGROUP_SCHED
...
Merge tag 'percpu-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu
Pull percpu updates from Dennis Zhou:
"One bigger change to percpu_counter's api allowing for init and
destroy of multiple counters via percpu_counter_init_many() and
percpu_counter_destroy_many(). This is used to help begin remediating
a performance regression with percpu rss stats.
Additionally, it seems larger core count machines are feeling the
burden of the single threaded allocation of percpu. Mateusz is
thinking about it and I will spend some time on it too.
percpu:
- A couple cleanups by Baoquan He and Bibo Mao. The only behavior
change is to start printing messages if we're under the warn limit
for failed atomic allocations.
percpu_counter:
- Shakeel introduced percpu counters into mm_struct which caused
percpu allocations be on the hot path [1]. Originally I spent some
time trying to improve the percpu allocator, but instead preferred
what Mateusz Guzik proposed grouping at the allocation site,
percpu_counter_init_many(). This allows a single percpu allocation
to be shared by the counters. I like this approach because it
creates a shared lifetime by the allocations. Additionally, I
believe many inits have higher level synchronization requirements,
like percpu_counter does against HOTPLUG_CPU. Therefore we can
group these optimizations together"
Link: https://lore.kernel.org/linux-mm/[email protected]/
* tag 'percpu-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
kernel/fork: group allocation/free of per-cpu counters for mm struct
pcpcntr: add group allocation/free
mm/percpu.c: print error message too if atomic alloc failed
mm/percpu.c: optimize the code in pcpu_setup_first_chunk() a little bit
mm/percpu.c: remove redundant check
mm/percpu: Remove some local variables in pcpu_populate_pte
Rick Edgecombe [Fri, 1 Sep 2023 18:16:52 +0000 (11:16 -0700)]
selftests/x86: Update map_shadow_stack syscall nr
Shadow stack's selftest utilizes the map_shadow_stack syscall. The
syscall is new with the feature, but the selftests cannot automatically
find the headers for the kernel source tree they are located in. This
resulted in the shadow stack test failing to build until the brand new
headers were installed.
To avoid this, a copy of the new uapi defines needed by the test were
included in the selftest (see link for discussion). When shadow stack was
merged the syscall number was changed, but the copy in the selftest was
not updated.
So update the copy of the syscall number define used when the required
headers are not installed, to have the final syscall number from the
merge.
Andy Chiu [Fri, 25 Aug 2023 05:02:46 +0000 (05:02 +0000)]
RISC-V: Add ptrace support for vectors
This patch add back the ptrace support with the following fix:
- Define NT_RISCV_CSR and re-number NT_RISCV_VECTOR to prevent
conflicting with gdb's NT_RISCV_CSR.
- Use struct __riscv_v_regset_state to handle ptrace requests
Since gdb does not directly include the note description header in
Linux and has already defined NT_RISCV_CSR as 0x900, we decide to
sync with gdb and renumber NT_RISCV_VECTOR to solve and prevent future
conflicts.
Paolo Bonzini [Fri, 1 Sep 2023 19:49:45 +0000 (15:49 -0400)]
Merge branch 'kvm-x86-mmu-6.6' into HEAD
KVM x86 MMU changes for 6.6:
- Rip out the ancient MMU_DEBUG crud and replace the useful bits with
CONFIG_KVM_PROVE_MMU
- Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the API surface
that is needed by external users (currently only KVMGT), and fix a variety
of issues in the process
- Fix KVM's handling of !visible guest roots to avoid premature triple fault
injection by loading a dummy root backed by the zero page
Merge tag 'for-linus-2023083101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Benjamin Tissoires:
- devm fixes for problems that caused use-after-free reports (Rahul
Rameshbabu)
- Some extensive HID docs (Marco Morandini)
- Constification of struct class (Ivan Orlov and Greg Kroah-Hartman)
- Google Stadia Force Feedback support (Fabio Baltieri)
- Various fixes and new device ID support
* tag 'for-linus-2023083101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (42 commits)
HID: logitech-hidpp: rework one more time the retries attempts
HID: nvidia-shield: Reference hid_device devm allocation of input_dev name
HID: multitouch: Correct devm device reference for hidinput input_dev name
HID: uclogic: Correct devm device reference for hidinput input_dev name
HID: logitech-dj: Fix error handling in logi_dj_recv_switch_to_dj_mode()
HID: i2c-hid: elan: Add ili9882t timing
dt-bindings: input: i2c-hid: Introduce Ilitek ili9882t
HID: apple: Add "Hailuck" to the list of non-apple keyboards
HID: steelseries: arctis_1_battery_request[] should be static
MAINTAINERS: update my email address
HID: logitech-hidpp: Add support for Logitech MX Anywhere 3 mouse
HID: wacom: struct name cleanup
HID: wacom: remove unnecessary 'connected' variable from EKR
HID: wacom: remove the battery when the EKR is off
HID: nvidia-shield: Update Thunderstrike LED instance name to use id
HID: nvidia-shield: Add battery support for Thunderstrike
HID: nvidia-shield: Remove led_classdev_unregister in thunderstrike_create
HID: hid-google-stadiaff: add support for Stadia force feedback
HID: logitech-dj: Add support for a new lightspeed receiver iteration
HID: logitech-hidpp: Add support for the Pro X Superlight
...
Merge tag 'media/v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new i2c drivers: ds90ub913, ds90ub953, ds90ub960, dw9719, ds90ub913
- new Intel IVSC MEI drivers
- some Mediatek platform drivers were moved to a common location
- Intel atomisp2 driver is now working with the main ov2680 driver. Due
to that, the atomisp2 ov2680 staging one was removed
- the bttv driver was finally converted to videobuf2 framework. This
was the last one upstream using videobuf version 1 core. We'll likely
remove the old videobuf framework on 6.7
- lots of improvements at atomisp driver: it now works with normal I2C
sensors. Several compile-mode dependecies to select between ISP2400
and ISP2401 are now solved in runtime
- a new ipu-bridge logic was added to work with IVSC MEI drivers
- venus driver gained better support for new VPU versions
- the v4l core async framework has gained lots of improvements and
cleanups
- lots of other cleanups, improvements and driver fixes
* tag 'media/v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (358 commits)
media: ivsc: Add ACPI dependency
media: bttv: convert to vb2
media: bttv: use audio defaults for winfast2000
media: bttv: refactor bttv_set_dma()
media: bttv: move vbi_skip/vbi_count out of buffer
media: bttv: remove crop info from bttv_buffer
media: bttv: remove tvnorm field from bttv_buffer
media: bttv: remove format field from bttv_buffer
media: bttv: move do_crop flag out of bttv_fh
media: bttv: copy vbi_fmt from bttv_fh
media: bttv: copy vid fmt/width/height from fh
media: bttv: radio use v4l2_fh instead of bttv_fh
media: bttv: replace BUG with WARN_ON
media: bttv: use video_drvdata to get bttv
media: i2c: rdacm21: Fix uninitialized value
media: coda: Remove duplicated include
media: vivid: fix the racy dev->radio_tx_rds_owner
media: i2c: ccs: Check rules is non-NULL
media: i2c: ds90ub960: Fix PLL config for 1200 MHz CSI rate
media: i2c: ds90ub953: Fix use of uninitialized variables
...
Merge tag 'fbdev-for-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
- Drop the mx3fb driver
- Use list_for_each_entry() helper in fbcore code
- Shorten neofb product names for fb-fix id field
- reduce memory usage in ssd1307fb
* tag 'fbdev-for-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: Update fbdev source file paths
fbdev: ssd1307fb: Use bool for ssd1307fb_deviceinfo flags
fbdev: neofb: Shorten Neomagic product name in info struct
fbdev: mx3fb: Remove the driver
fbdev/core: Use list_for_each_entry() helper
Merge tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
changes for 6.6-rc1.
Stuff all over the place here, lots of driver updates and changes and
new additions. Short summary is:
- new IIO drivers and updates
- Interconnect driver updates
- fpga driver updates and additions
- fsi driver updates
- mei driver updates
- coresight driver updates
- nvmem driver updates
- counter driver updates
- lots of smaller misc and char driver updates and additions
All of these have been in linux-next for a long time with no reported
problems"
* tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (267 commits)
nvmem: core: Notify when a new layout is registered
nvmem: core: Do not open-code existing functions
nvmem: core: Return NULL when no nvmem layout is found
nvmem: core: Create all cells before adding the nvmem device
nvmem: u-boot-env:: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
nvmem: sec-qfprom: Add Qualcomm secure QFPROM support
dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom
dt-bindings: nvmem: Add compatible for QCM2290
nvmem: Kconfig: Fix typo "drive" -> "driver"
nvmem: Explicitly include correct DT includes
nvmem: add new NXP QorIQ eFuse driver
dt-bindings: nvmem: Add t1023-sfp efuse support
dt-bindings: nvmem: qfprom: Add compatible for MSM8226
nvmem: uniphier: Use devm_platform_get_and_ioremap_resource()
nvmem: qfprom: do some cleanup
nvmem: stm32-romem: Use devm_platform_get_and_ioremap_resource()
nvmem: rockchip-efuse: Use devm_platform_get_and_ioremap_resource()
nvmem: meson-mx-efuse: Convert to devm_platform_ioremap_resource()
nvmem: lpc18xx_otp: Convert to devm_platform_ioremap_resource()
nvmem: brcm_nvram: Use devm_platform_get_and_ioremap_resource()
...
Merge tag 'driver-core-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is a small set of driver core updates and additions for 6.6-rc1.
Included in here are:
- stable kernel documentation updates
- class structure const work from Ivan on various subsystems
- kernfs tweaks
- driver core tests!
- kobject sanity cleanups
- kobject structure reordering to save space
- driver core error code handling fixups
- other minor driver core cleanups
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits)
driver core: Call in reversed order in device_platform_notify_remove()
driver core: Return proper error code when dev_set_name() fails
kobject: Remove redundant checks for whether ktype is NULL
kobject: Add sanity check for kset->kobj.ktype in kset_register()
drivers: base: test: Add missing MODULE_* macros to root device tests
drivers: base: test: Add missing MODULE_* macros for platform devices tests
drivers: base: Free devm resources when unregistering a device
drivers: base: Add basic devm tests for platform devices
drivers: base: Add basic devm tests for root devices
kernfs: fix missing kernfs_iattr_rwsem locking
docs: stable-kernel-rules: mention that regressions must be prevented
docs: stable-kernel-rules: fine-tune various details
docs: stable-kernel-rules: make the examples for option 1 a proper list
docs: stable-kernel-rules: move text around to improve flow
docs: stable-kernel-rules: improve structure by changing headlines
base/node: Remove duplicated include
kernfs: attach uuid for every kernfs and report it in fsid
kernfs: add stub helper for kernfs_generic_poll()
x86/resctrl: make pseudo_lock_class a static const structure
x86/MSR: make msr_class a static const structure
...
Merge tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of tty and serial driver changes for 6.6-rc1.
Lots of cleanups in here this cycle, and some driver updates. Short
summary is:
- Jiri's continued work to make the tty code and apis be a bit more
sane with regards to modern kernel coding style and types
- cpm_uart driver updates
- n_gsm updates and fixes
- meson driver updates
- sc16is7xx driver updates
- 8250 driver updates for different hardware types
- qcom-geni driver fixes
- tegra serial driver change
- stm32 driver updates
- synclink_gt driver cleanups
- tty structure size reduction
All of these have been in linux-next this week with no reported
issues. The last bit of cleanups from Jiri and the tty structure size
reduction came in last week, a bit late but as they were just style
changes and size reductions, I figured they should get into this merge
cycle so that others can work on top of them with no merge conflicts"
* tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits)
tty: shrink the size of struct tty_struct by 40 bytes
tty: n_tty: deduplicate copy code in n_tty_receive_buf_real_raw()
tty: n_tty: extract ECHO_OP processing to a separate function
tty: n_tty: unify counts to size_t
tty: n_tty: use u8 for chars and flags
tty: n_tty: simplify chars_in_buffer()
tty: n_tty: remove unsigned char casts from character constants
tty: n_tty: move newline handling to a separate function
tty: n_tty: move canon handling to a separate function
tty: n_tty: use MASK() for masking out size bits
tty: n_tty: make n_tty_data::num_overrun unsigned
tty: n_tty: use time_is_before_jiffies() in n_tty_receive_overrun()
tty: n_tty: use 'num' for writes' counts
tty: n_tty: use output character directly
tty: n_tty: make flow of n_tty_receive_buf_common() a bool
Revert "tty: serial: meson: Add a earlycon for the T7 SoC"
Documentation: devices.txt: Fix minors for ttyCPM*
Documentation: devices.txt: Remove ttySIOC*
Documentation: devices.txt: Remove ttyIOC*
serial: 8250_bcm7271: improve bcm7271 8250 port
...
Merge tag 'staging-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here are a set of staging driver cleanups for 6.6-rc1. Nothing huge in
here at all, overall we dropped a few hundred lines of code, it's been
a quiet development cycle for this subsystem.
Nothing stands out, everything can be categorized as "minor coding
style cleanups for staging drivers" and there was one race condition
fixed.
Full details in the shortlog.
All have been in linux-next for a while with no reported problems"
* tag 'staging-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (71 commits)
staging: rtl8192e: Annotate struct rtllib_txb with __counted_by
staging: greybus: fix alignment of open parenthesis
staging: sm750fb: fix sii164InitChip function name
staging: vme_user: fix check lines should not end with a '('
staging: vme_user: fix check blank lines not necessary
staging: rtl8723bs: Use helpers to check broadcast and multicast Ether addresses
staging: vt6655: replace camel case by snake case
staging: rtl8192e: Remove unsupported mode IW_MODE_MESH
staging: rtl8192e: Remove unsupported mode IW_MODE_REPEAT
staging: rtl8192e: Remove unused function rtllib_start_master_bss()
staging: rtl8192e: Remove unsupported mode IW_MODE_MASTER
staging: vt6655: Change camel case variables to snake case
staging: fieldbus: arcx-anybus: Remove redundant of_match_ptr()
staging: vme_user: fix alignment of open parenthesis
Staging: rtl8192e: Rename function RxBaInactTimeout
Staging: rtl8192e: Rename function TxBaInactTimeout
Staging: rtl8192e: Rename function BaSetupTimeOut
Staging: rtl8192e: Rename function TsInitDelBA
Staging: rtl8192e: Rename function TsInitAddBA
staging: vme_user: fix check alignment should match open parenthesis
...
Merge tag 'usb-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt / PHY driver updates from Greg KH:
"Here is the big set of USB, Thunderbolt, and PHY driver updates for
6.6-rc1. Included in here are:
- PHY driver additions and cleanups
- Thunderbolt minor additions and fixes
- USB MIDI 2 gadget support added
- dwc3 driver updates and additions
- Removal of some old USB wireless code that was missed when that
codebase was originally removed a few years ago, cleaning up some
core USB code paths
- USB core potential use-after-free fixes that syzbot from different
people/groups keeps tripping over
- typec updates and additions
- gadget fixes and cleanups
- loads of smaller USB core and driver cleanups all over the place
Full details are in the shortlog. All of these have been in linux-next
for a while with no reported problems"
* tag 'usb-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
platform/chrome: cros_ec_typec: Configure Retimer cable type
tcpm: Avoid soft reset when partner does not support get_status
usb: typec: tcpm: reset counter when enter into unattached state after try role
usb: typec: tcpm: set initial svdm version based on pd revision
USB: serial: option: add FOXCONN T99W368/T99W373 product
USB: serial: option: add Quectel EM05G variant (0x030e)
usb: dwc2: add pci_device_id driver_data parse support
usb: gadget: remove max support speed info in bind operation
usb: gadget: composite: cleanup function config_ep_by_speed_and_alt()
usb: gadget: config: remove max speed check in usb_assign_descriptors()
usb: gadget: unconditionally allocate hs/ss descriptor in bind operation
usb: gadget: f_uvc: change endpoint allocation in uvc_function_bind()
usb: gadget: add a inline function gether_bitrate()
usb: gadget: use working speed to calcaulate network bitrate and qlen
dt-bindings: usb: samsung,exynos-dwc3: Add Exynos850 support
usb: dwc3: exynos: Add support for Exynos850 variant
usb: gadget: udc-xilinx: fix incorrect type in assignment warning
usb: gadget: udc-xilinx: fix cast from restricted __le16 warning
usb: gadget: udc-xilinx: fix restricted __le16 degrades to integer warning
USB: dwc2: hande irq on dead controller correctly
...
Merge tag 'platform-drivers-x86-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- hp-bioscfg: New firmware-attributes driver for changing BIOS settings
from within Linux
- asus-wmi: Add charger mode, middle fan and eGPU settings support
- ideapad: Support keyboard backlight control on more models
- mellanox: Support for new models
- sel-3350: New LED and power-supply driver for this industrial
mainboard
- simatic-ipc: Add RTC battery monitor and various new models support
- miscellaneous other cleanups / fixes
* tag 'platform-drivers-x86-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (101 commits)
platform/x86: asus-wmi: corrections to egpu safety check
platform/x86: mlx-platform: Add dependency on PCI to Kconfig
platform/x86: ideapad-laptop: Add support for keyboard backlights using KBLC ACPI symbol
platform/x86/amd/pmc: Fix build error with randconfig
platform/x86/amd/pmf: Fix a missing cleanup path
watchdog: simatic: Use idiomatic selection of P2SB
platform/x86: p2sb: Make the Kconfig symbol hidden
Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
platform: mellanox: nvsw-sn2201: change fans i2c busses.
platform: mellanox: mlxreg-hotplug: Extend condition for notification callback processing
platform: mellanox: Add initial support for PCIe based programming logic device
platform: mellanox: mlx-platform: Get interrupt line through ACPI
platform: mellanox: mlx-platform: Introduce ACPI init flow
platform: mellanox: mlx-platform: Prepare driver to allow probing through ACPI infrastructure
platform: mellanox: mlx-platform: Add reset callback
platform: mellanox: Cosmetic changes
platform: mellanox: mlx-platform: Modify power off callback
platform: mellanox: mlx-platform: add support for additional CPLD
platform: mellanox: mlx-platform: Add reset cause attribute
platform: mellanox: mlx-platform: Modify health and power hotplug action
...
Lad Prabhakar [Fri, 18 Aug 2023 13:57:22 +0000 (14:57 +0100)]
cache: Add L2 cache management for Andes AX45MP RISC-V core
I/O Coherence Port (IOCP) provides an AXI interface for connecting
external non-caching masters, such as DMA controllers. The accesses
from IOCP are coherent with D-Caches and L2 Cache.
IOCP is a specification option and is disabled on the Renesas RZ/Five
SoC due to this reason IP blocks using DMA will fail.
The Andes AX45MP core has a Programmable Physical Memory Attributes (PMA)
block that allows dynamic adjustment of memory attributes in the runtime.
It contains a configurable amount of PMA entries implemented as CSR
registers to control the attributes of memory locations in interest.
Below are the memory attributes supported:
* Device, Non-bufferable
* Device, bufferable
* Memory, Non-cacheable, Non-bufferable
* Memory, Non-cacheable, Bufferable
* Memory, Write-back, No-allocate
* Memory, Write-back, Read-allocate
* Memory, Write-back, Write-allocate
* Memory, Write-back, Read and Write-allocate
More info about PMA (section 10.3): Link: http://www.andestech.com/wp-content/uploads/AX45MP-1C-Rev.-5.0.0-Datasheet.pdf
As a workaround for SoCs with IOCP disabled CMO needs to be handled by
software. Firstly OpenSBI configures the memory region as
"Memory, Non-cacheable, Bufferable" and passes this region as a global
shared dma pool as a DT node. With DMA_GLOBAL_POOL enabled all DMA
allocations happen from this region and synchronization callbacks are
implemented to synchronize when doing DMA transactions.
Example PMA region passes as a DT node from OpenSBI:
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
Add DT binding documentation for L2 cache controller found on RZ/Five SoC.
The Renesas RZ/Five microprocessor includes a RISC-V CPU Core (AX45MP
Single) from Andes. The AX45MP core has an L2 cache controller, this patch
describes the L2 cache block.
Lad Prabhakar [Fri, 18 Aug 2023 13:57:20 +0000 (14:57 +0100)]
riscv: mm: dma-noncoherent: nonstandard cache operations support
Introduce support for nonstandard noncoherent systems in the RISC-V
architecture. It enables function pointer support to handle cache
management in such systems.
This patch adds a new configuration option called
"RISCV_NONSTANDARD_CACHE_OPS." This option is a boolean flag that
depends on "RISCV_DMA_NONCOHERENT" and enables the function pointer
support for cache management in nonstandard noncoherent systems.
Lad Prabhakar [Fri, 18 Aug 2023 13:57:19 +0000 (14:57 +0100)]
riscv: errata: Add Andes alternative ports
Add required ports of the Alternative scheme for Andes CPU cores.
I/O Coherence Port (IOCP) provides an AXI interface for connecting external
non-caching masters, such as DMA controllers. IOCP is a specification
option and is disabled on the Renesas RZ/Five SoC due to this reason cache
management needs a software workaround.
Lad Prabhakar [Wed, 16 Aug 2023 23:23:36 +0000 (00:23 +0100)]
riscv: dma-mapping: switch over to generic implementation
Add helper functions for cache wback/inval/clean and use them
arch_sync_dma_for_device()/arch_sync_dma_for_cpu() functions. The proposed
changes are in preparation for switching over to generic implementation.
Reorganization of the code is based on the patch (Link[0]) from Arnd.
For now I have dropped CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU check as this
will be enabled by default upon selection of RISCV_DMA_NONCOHERENT
and also dropped arch_dma_mark_dcache_clean().
Arnd Bergmann [Wed, 16 Aug 2023 23:23:35 +0000 (00:23 +0100)]
riscv: dma-mapping: skip invalidation before bidirectional DMA
For a DMA_BIDIRECTIONAL transfer, the caches have to be cleaned
first to let the device see data written by the CPU, and invalidated
after the transfer to let the CPU see data written by the device.
riscv also invalidates the caches before the transfer, which does
not appear to serve any purpose.
Arnd Bergmann [Wed, 16 Aug 2023 23:23:34 +0000 (00:23 +0100)]
riscv: dma-mapping: only invalidate after DMA, not flush
No other architecture intentionally writes back dirty cache lines into
a buffer that a device has just finished writing into. If the cache is
clean, this has no effect at all, but if a cacheline in the buffer has
actually been written by the CPU, there is a driver bug that is likely
made worse by overwriting that buffer.
Evan Green [Fri, 18 Aug 2023 19:41:36 +0000 (12:41 -0700)]
RISC-V: alternative: Remove feature_probe_func
Now that we're testing unaligned memory copy and making that
determination generically, there are no more users of the vendor
feature_probe_func(). While I think it's probably going to need to come
back, there are no users right now, so let's remove it until it's
needed.
Evan Green [Fri, 18 Aug 2023 19:41:35 +0000 (12:41 -0700)]
RISC-V: Probe for unaligned access speed
Rather than deferring unaligned access speed determinations to a vendor
function, let's probe them and find out how fast they are. If we
determine that an unaligned word access is faster than N byte accesses,
mark the hardware's unaligned access as "fast". Otherwise, we mark
accesses as slow.
The algorithm itself runs for a fixed amount of jiffies. Within each
iteration it attempts to time a single loop, and then keeps only the best
(fastest) loop it saw. This algorithm was found to have lower variance from
run to run than my first attempt, which counted the total number of
iterations that could be done in that fixed amount of jiffies. By taking
only the best iteration in the loop, assuming at least one loop wasn't
perturbed by an interrupt, we eliminate the effects of interrupts and
other "warm up" factors like branch prediction. The only downside is it
depends on having an rdtime granular and accurate enough to measure a
single copy. If we ever manage to complete a loop in 0 rdtime ticks, we
leave the unaligned setting at UNKNOWN.
There is a slight change in user-visible behavior here. Previously, all
boards except the THead C906 reported misaligned access speed of
UNKNOWN. C906 reported FAST. With this change, since we're now measuring
misaligned access speed on each hart, all RISC-V systems will have this
key set as either FAST or SLOW.
Currently, we don't have a way to confidently measure the difference between
SLOW and EMULATED, so we label anything not fast as SLOW. This will
mislabel some systems that are actually EMULATED as SLOW. When we get
support for delegating misaligned access traps to the kernel (as opposed
to the firmware quietly handling it), we can explicitly test in Linux to
see if unaligned accesses trap. Those systems will start to report
EMULATED, though older (today's) systems without that new SBI mechanism
will continue to report SLOW.
I've updated the documentation for those hwprobe values to reflect
this, specifically: SLOW may or may not be emulated by software, and FAST
represents means being faster than equivalent byte accesses. The change
in documentation is accurate with respect to both the former and current
behavior.
Merge tag 'riscv-for-linus-6.6-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the new "riscv,isa-extensions" and "riscv,isa-base"
device tree interfaces for probing extensions
- Support for userspace access to the performance counters
- Support for more instructions in kprobes
- Crash kernels can be allocated above 4GiB
- Support for KCFI
- Support for ELFs in !MMU configurations
- ARCH_KMALLOC_MINALIGN has been reduced to 8
- mmap() defaults to sv48-sized addresses, with longer addresses hidden
behind a hint (similar to Arm and Intel)
- Also various fixes and cleanups
* tag 'riscv-for-linus-6.6-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
lib/Kconfig.debug: Restrict DEBUG_INFO_SPLIT for RISC-V
riscv: support PREEMPT_DYNAMIC with static keys
riscv: Move create_tmp_mapping() to init sections
riscv: Mark KASAN tmp* page tables variables as static
riscv: mm: use bitmap_zero() API
riscv: enable DEBUG_FORCE_FUNCTION_ALIGN_64B
riscv: remove redundant mv instructions
RISC-V: mm: Document mmap changes
RISC-V: mm: Update pgtable comment documentation
RISC-V: mm: Add tests for RISC-V mm
RISC-V: mm: Restrict address space for sv39,sv48,sv57
riscv: enable DMA_BOUNCE_UNALIGNED_KMALLOC for !dma_coherent
riscv: allow kmalloc() caches aligned to the smallest value
riscv: support the elf-fdpic binfmt loader
binfmt_elf_fdpic: support 64-bit systems
riscv: Allow CONFIG_CFI_CLANG to be selected
riscv/purgatory: Disable CFI
riscv: Add CFI error handling
riscv: Add ftrace_stub_graph
riscv: Add types to indirectly called assembly functions
...
Fix these problems by setting requests state to MQ_RQ_COMPLETE under
nq->poll_lock protection, in which null_timeout_rq() can safely detect
this race and early return.
Note this patch just fix the kernel panic when request timeout happen.
Ming Lei [Fri, 1 Sep 2023 13:49:16 +0000 (21:49 +0800)]
io_uring: fix IO hang in io_wq_put_and_exit from do_exit()
io_wq_put_and_exit() is called from do_exit(), but all FIXED_FILE requests
in io_wq aren't canceled in io_uring_cancel_generic() called from do_exit().
Meantime io_wq IO code path may share resource with normal iopoll code
path.
So if any HIPRI request is submittd via io_wq, this request may not get resouce
for moving on, given iopoll isn't possible in io_wq_put_and_exit().
The issue can be triggered when terminating 't/io_uring -n4 /dev/nullb0'
with default null_blk parameters.
Fix it by always cancelling all requests in io_wq by adding helper of
io_uring_cancel_wq(), and this way is reasonable because io_wq destroying
follows canceling requests immediately.
Heiko Carstens [Mon, 28 Aug 2023 15:31:42 +0000 (17:31 +0200)]
s390/dasd: fix string length handling
Building dasd_eckd.o with latest clang reveals this bug:
CC drivers/s390/block/dasd_eckd.o
drivers/s390/block/dasd_eckd.c:1082:3: warning: 'snprintf' will always be truncated;
specified size is 1, but format string expands to at least 11 [-Wfortify-source]
1082 | snprintf(print_uid, sizeof(*print_uid),
| ^
drivers/s390/block/dasd_eckd.c:1087:3: warning: 'snprintf' will always be truncated;
specified size is 1, but format string expands to at least 10 [-Wfortify-source]
1087 | snprintf(print_uid, sizeof(*print_uid),
| ^
Fix this by moving and using the existing UID_STRLEN for the arrays
that are being written to. Also rename UID_STRLEN to DASD_UID_STRLEN
to clarify its scope.
Takashi Iwai [Thu, 31 Aug 2023 13:04:57 +0000 (15:04 +0200)]
ASoC: Name iov_iter argument as iterator instead of buffer
While transitioning ASoC code for iov_iter usages, I kept the argument
name as "buf" as the original code. But, iov_iter is an iterator, and
using the name "buf" may be misleading: the crucial difference is that
iov_iter can be proceeded after the operation, hence it can't be
passed twice, while a simple "buffer" sounds as if reusable.
To make the usage clearer, rename the argument from "buf" to "iter".
There is no functional changes, just names.
Takashi Iwai [Thu, 31 Aug 2023 13:04:56 +0000 (15:04 +0200)]
ASoC: dmaengine: Drop unused iov_iter for process callback
Passing the iov_iter to the process callback is rather buggy, as the
iterator has been already processed for playback. Similarly, it makes
the copy for capture buggy after the process callback reading the
iterator out. Moreover, all existing process callbacks don't refer to
the passed iterator at all. So, it's better to drop the argument from
the process callback.
selftests/bpf: Fix a CI failure caused by vsock write
While commit 90f0074cd9f9 ("selftests/bpf: fix a CI failure caused by vsock sockmap test")
fixes a receive failure of vsock sockmap test, there is still a write failure:
Error: #211/79 sockmap_listen/sockmap VSOCK test_vsock_redir
Error: #211/79 sockmap_listen/sockmap VSOCK test_vsock_redir
./test_progs:vsock_unix_redir_connectible:1501: egress: write: Transport endpoint is not connected
vsock_unix_redir_connectible:FAIL:1501
./test_progs:vsock_unix_redir_connectible:1501: ingress: write: Transport endpoint is not connected
vsock_unix_redir_connectible:FAIL:1501
./test_progs:vsock_unix_redir_connectible:1501: egress: write: Transport endpoint is not connected
vsock_unix_redir_connectible:FAIL:1501
The reason is that the vsock connection in the test is set to ESTABLISHED state
by function virtio_transport_recv_pkt, which is executed in a workqueue thread,
so when the user space test thread runs before the workqueue thread, this
problem occurs.
To fix it, before writing the connection, wait for it to be connected.
Introduce KCONFIG_WARN_UNKNOWN_SYMBOLS environment variable,
which makes Kconfig warn about unknown config symbols.
This is especially useful for continuous kernel uprevs when
some symbols can be either removed or renamed between kernel
releases (which can go unnoticed otherwise).
By default KCONFIG_WARN_UNKNOWN_SYMBOLS generates warnings,
which are non-terminal. There is an additional environment
variable KCONFIG_WERROR that overrides this behaviour and
turns warnings into errors.
Edward Cree [Thu, 31 Aug 2023 16:58:11 +0000 (17:58 +0100)]
sfc: check for zero length in EF10 RX prefix
When EF10 RXDP firmware is operating in cut-through mode, packet length
is not known at the time the RX prefix is generated, so it is left as
zero and RX event merging is inhibited to ensure that the length is
available in the RX event. However, it has been found that in certain
circumstances the RX events for these packets still get merged,
meaning the driver cannot read the length from the RX event, and tries
to use the length from the prefix.
The resulting zero-length SKBs cause crashes in GRO since commit 1d11fa696733 ("net-gro: remove GRO_DROP"), so add a check to the driver
to detect these zero-length RX events and discard the packet.
David S. Miller [Fri, 1 Sep 2023 07:11:51 +0000 (08:11 +0100)]
Merge branch 'dst-hint-multipath'
Sriram Yagnaraman says:
====================
Avoid TCP resets when using ECMP for load-balancing between multiple servers.
All packets in the same flow (L3/L4 depending on multipath hash policy)
should be directed to the same target, but after [0]/[1] we see stray
packets directed towards other targets. This, for instance, causes RST
to be sent on TCP connections.
The first two patches solve the problem by ignoring route hints for
destinations that are part of multipath group, by using new SKB flags
for IPv4 and IPv6. The third patch is a selftest that tests the
scenario.
Thanks to Ido, for reviewing and suggesting a way forward in [2] and
also suggesting how to write a selftest for this.
v4->v5:
- Fixed review comments from Ido
v3->v4:
- Remove single path test
- Rebase to latest
v2->v3:
- Add NULL check for skb in fib6_select_path (Ido Schimmel)
- Use fib_tests.sh for selftest instead of the forwarding suite (Ido
Schimmel)
v1->v2:
- Update to commit messages describing the solution (Ido Schimmel)
- Use perf stat to count fib table lookups in selftest (Ido Schimmel)
====================
selftests: fib_tests: Add multipath list receive tests
The test uses perf stat to count the number of fib:fib_table_lookup
tracepoint hits for IPv4 and the number of fib6:fib6_table_lookup for
IPv6. The measured count is checked to be within 5% of the total number
of packets sent via veth1.
Route hints when the nexthop is part of a multipath group causes packets
in the same receive batch to be sent to the same nexthop irrespective of
the multipath hash of the packet. So, do not extract route hint for
packets whose destination is part of a multipath group.
A new SKB flag IP6SKB_MULTIPATH is introduced for this purpose, set the
flag when route is looked up in fib6_select_path() and use it in
ip6_can_use_hint() to check for the existence of the flag.
Fixes: 197dbf24e360 ("ipv6: introduce and uses route look hints for list input.") Signed-off-by: Sriram Yagnaraman <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Route hints when the nexthop is part of a multipath group causes packets
in the same receive batch to be sent to the same nexthop irrespective of
the multipath hash of the packet. So, do not extract route hint for
packets whose destination is part of a multipath group.
A new SKB flag IPSKB_MULTIPATH is introduced for this purpose, set the
flag when route is looked up in ip_mkroute_input() and use it in
ip_extract_route_hint() to check for the existence of the flag.
skbuff: skb_segment, Call zero copy functions before using skbuff frags
Commit bf5c25d60861 ("skbuff: in skb_segment, call zerocopy functions
once per nskb") added the call to zero copy functions in skb_segment().
The change introduced a bug in skb_segment() because skb_orphan_frags()
may possibly change the number of fragments or allocate new fragments
altogether leaving nrfrags and frag to point to the old values. This can
cause a panic with stacktrace like the one below.
In this case calling skb_orphan_frags() updated nr_frags leaving nrfrags
local variable in skb_segment() stale. This resulted in the code hitting
i >= nrfrags prematurely and trying to move to next frag_skb using
list_skb pointer, which was NULL, and caused kernel panic. Move the call
to zero copy functions before using frags and nr_frags.
Nick Desaulniers [Fri, 25 Aug 2023 17:38:01 +0000 (10:38 -0700)]
Documentation/llvm: refresh docs
Recent fixes for an embargoed hardware security vulnerability failed to
link with ld.lld (LLVM's linker). [0] To be fair, our documentation
mentions ``CC=clang`` foremost with ``LLVM=1`` being buried "below the
fold."
We want to encourage the use of ``LLVM=1`` rather than just
``CC=clang``. Make that suggestion "above the fold" and "front and
center" in our docs.
While here, the following additional changes were made:
- remove the bit about CROSS_COMPILE setting --target=, that's no longer
true.
- Add ARCH=loongarch to the list of maintained targets (though we're
still working on getting defconfig building cleanly at the moment;
we're pretty close).
- Bump ARCH=powerpc from CC=clang to LLVM=1 status.
- Promote ARCH=riscv from being Maintained to being Supported. Android
is working towards supporting RISC-V, and we have excellent support
from multiple companies in this regard.
- Note that the toolchain distribution on kernel.org has been built with
profile data from kernel builds.
- Note how to use ccache with clang.
.llvm.call-graph-profile section is added by clang when the kernel is
built with profiles (e.g. -fprofile-sample-use= or -fprofile-use=).
Note that .llvm.call-graph-profile intentionally uses REL relocations
to decrease the object size, for more details see
https://reviews.llvm.org/D104080.
The section contains edge information derived from text sections,
so .llvm.call-graph-profile itself doesn't need more analysis as
the text sections have been analyzed.
This change fixes the kernel build with clang and a sample profile
which currently fails with:
"FATAL: modpost: Please add code to calculate addend for this architecture"
Masahiro Yamada [Wed, 23 Aug 2023 11:50:47 +0000 (20:50 +0900)]
kbuild: support 'make modules_sign' with CONFIG_MODULE_SIG_ALL=n
Commit d890f510c8e4 ("MODSIGN: Add modules_sign make target") introduced
'make modules_sign' to manually sign modules.
Some time later, commit d9d8d7ed498e ("MODSIGN: Add option to not sign
modules during modules_install") introduced CONFIG_MODULE_SIG_ALL.
If it was disabled, mod_sign_cmd was set to no-op ('true' command).
It affected not only 'make modules_install' but also 'make modules_sign'.
With CONFIG_MODULE_SIG_ALL=n, neither modules_install nor modules_sign
is able to sign modules.
Kbuild has kept that behavior, and nobody has complained about it, but
I think it is weird.
CONFIG_MODULE_SIG_ALL=n should turn off signing only for modules_install.
If users want to sign modules manually, modules_sign should be offered.
Eric Dumazet [Thu, 31 Aug 2023 13:52:12 +0000 (13:52 +0000)]
net: annotate data-races around sk->sk_bind_phc
sk->sk_bind_phc is read locklessly. Add corresponding annotations.
Fixes: d463126e23f1 ("net: sock: extend SO_TIMESTAMPING for PHC binding") Signed-off-by: Eric Dumazet <[email protected]> Cc: Yangbo Lu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Eric Dumazet [Thu, 31 Aug 2023 13:52:11 +0000 (13:52 +0000)]
net: annotate data-races around sk->sk_tsflags
sk->sk_tsflags can be read locklessly, add corresponding annotations.
Fixes: b9f40e21ef42 ("net-timestamp: move timestamp flags out of sk_flags") Signed-off-by: Eric Dumazet <[email protected]> Cc: Willem de Bruijn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Eric Dumazet [Thu, 31 Aug 2023 13:52:10 +0000 (13:52 +0000)]
mptcp: annotate data-races around msk->rmem_fwd_alloc
msk->rmem_fwd_alloc can be read locklessly.
Add mptcp_rmem_fwd_alloc_add(), similar to sk_forward_alloc_add(),
and appropriate READ_ONCE()/WRITE_ONCE() annotations.
Fixes: 6511882cdd82 ("mptcp: allocate fwd memory separately on the rx and tx path") Signed-off-by: Eric Dumazet <[email protected]> Cc: Paolo Abeni <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Eric Dumazet [Thu, 31 Aug 2023 13:52:08 +0000 (13:52 +0000)]
net: use sk_forward_alloc_get() in sk_get_meminfo()
inet_sk_diag_fill() has been changed to use sk_forward_alloc_get(),
but sk_get_meminfo() was forgotten.
Fixes: 292e6077b040 ("net: introduce sk_forward_alloc_get()") Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Linus Torvalds [Thu, 31 Aug 2023 22:36:41 +0000 (15:36 -0700)]
Merge tag 'nfs-for-6.6-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"New Features:
- Enable the NFS v4.2 READ_PLUS operation by default
Stable Fixes:
- NFSv4/pnfs: minor fix for cleanup path in nfs4_get_device_info
- NFS: Fix a potential data corruption
Bugfixes:
- Fix various READ_PLUS issues including:
- smatch warnings
- xdr size calculations
- scratch buffer handling
- 32bit / highmem xdr page handling
- Fix checkpatch errors in file.c
- Fix redundant readdir request after an EOF
- Fix handling of COPY ERR_OFFLOAD_NO_REQ
- Fix assignment of xprtdata.cred
Cleanups:
- Remove unused xprtrdma function declarations
- Clean up an integer overflow check to avoid a warning
- Clean up #includes in dns_resolve.c
- Clean up nfs4_get_device_info so we don't pass a NULL pointer
to __free_page()
- Clean up sunrpc TCP socket timeout configuration
- Guard against READDIR loops when entry names are too long
- Use EXCHID4_FLAG_USE_PNFS_DS for DS servers"
* tag 'nfs-for-6.6-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (22 commits)
pNFS: Fix assignment of xprtdata.cred
NFSv4.2: fix handling of COPY ERR_OFFLOAD_NO_REQ
NFS: Guard against READDIR loop when entry names exceed MAXNAMELEN
NFSv4.1: use EXCHGID4_FLAG_USE_PNFS_DS for DS server
NFS/pNFS: Set the connect timeout for the pNFS flexfiles driver
SUNRPC: Don't override connect timeouts in rpc_clnt_add_xprt()
SUNRPC: Allow specification of TCP client connect timeout at setup
SUNRPC: Refactor and simplify connect timeout
SUNRPC: Set the TCP_SYNCNT to match the socket timeout
NFS: Fix a potential data corruption
nfs: fix redundant readdir request after get eof
nfs/blocklayout: Use the passed in gfp flags
filemap: Fix errors in file.c
NFSv4/pnfs: minor fix for cleanup path in nfs4_get_device_info
NFS: Move common includes outside ifdef
SUNRPC: clean up integer overflow check
xprtrdma: Remove unused function declaration rpcrdma_bc_post_recv()
NFS: Enable the READ_PLUS operation by default
SUNRPC: kmap() the xdr pages during decode
NFSv4.2: Rework scratch handling for READ_PLUS (again)
...
Linus Torvalds [Thu, 31 Aug 2023 22:32:18 +0000 (15:32 -0700)]
Merge tag 'nfsd-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"I'm thrilled to announce that the Linux in-kernel NFS server now
offers NFSv4 write delegations. A write delegation enables a client to
cache data and metadata for a single file more aggressively, reducing
network round trips and server workload. Many thanks to Dai Ngo for
contributing this facility, and to Jeff Layton and Neil Brown for
reviewing and testing it.
This release also sees the removal of all support for DES- and
triple-DES-based Kerberos encryption types in the kernel's SunRPC
implementation. These encryption types have been deprecated by the
Internet community for years and are considered insecure. This change
affects both the in-kernel NFS client and server.
The server's UDP and TCP socket transports have now fully adopted
David Howells' new bio_vec iterator so that no more than one sendmsg()
call is needed to transmit each RPC message. In particular, this helps
kTLS optimize record boundaries when sending RPC-with-TLS replies, and
it takes the server a baby step closer to handling file I/O via
folios.
We've begun work on overhauling the SunRPC thread scheduler to remove
a costly linked-list walk when looking for an idle RPC service thread
to wake. The pre-requisites are included in this release. Thanks to
Neil Brown for his ongoing work on this improvement"
* tag 'nfsd-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (56 commits)
Documentation: Add missing documentation for EXPORT_OP flags
SUNRPC: Remove unused declaration rpc_modcount()
SUNRPC: Remove unused declarations
NFSD: da_addr_body field missing in some GETDEVICEINFO replies
SUNRPC: Remove return value of svc_pool_wake_idle_thread()
SUNRPC: make rqst_should_sleep() idempotent()
SUNRPC: Clean up svc_set_num_threads
SUNRPC: Count ingress RPC messages per svc_pool
SUNRPC: Deduplicate thread wake-up code
SUNRPC: Move trace_svc_xprt_enqueue
SUNRPC: Add enum svc_auth_status
SUNRPC: change svc_xprt::xpt_flags bits to enum
SUNRPC: change svc_rqst::rq_flags bits to enum
SUNRPC: change svc_pool::sp_flags bits to enum
SUNRPC: change cache_head.flags bits to enum
SUNRPC: remove timeout arg from svc_recv()
SUNRPC: change svc_recv() to return void.
SUNRPC: call svc_process() from svc_recv().
nfsd: separate nfsd_last_thread() from nfsd_put()
nfsd: Simplify code around svc_exit_thread() call in nfsd()
...
fbdev: ssd1307fb: Use bool for ssd1307fb_deviceinfo flags
The .need_pwm and .need_chargepump fields in struct ssd1307fb_deviceinfo
are flags that can have only two possible values: 0 and 1.
Reduce kernel size by changing their types from int to bool.
Helge Deller [Thu, 31 Aug 2023 21:14:18 +0000 (23:14 +0200)]
fbdev: neofb: Shorten Neomagic product name in info struct
Avoid those compiler warnings:
neofb.c:1959:3: warning: 'snprintf' will always be truncated;
specified size is 16, but format string expands to at least 17 [-Wfortify-source]
Linus Torvalds [Thu, 31 Aug 2023 22:28:26 +0000 (15:28 -0700)]
Merge tag '6.6-rc-ksmbd-fixes-part1' of git://git.samba.org/ksmbd
Pull smb server updates from Steve French:
- fix potential overflows in decoding create and in session setup
requests
- cleanup fixes
- compounding fixes, including one for MacOS compounded read requests
- session setup error handling fix
- fix mode bit bug when applying force_directory_mode and
force_create_mode
- RDMA (smbdirect) write fix
* tag '6.6-rc-ksmbd-fixes-part1' of git://git.samba.org/ksmbd:
ksmbd: add missing calling smb2_set_err_rsp() on error
ksmbd: replace one-element array with flex-array member in struct smb2_ea_info
ksmbd: fix slub overflow in ksmbd_decode_ntlmssp_auth_blob()
ksmbd: fix wrong DataOffset validation of create context
ksmbd: Fix one kernel-doc comment
ksmbd: reduce descriptor size if remaining bytes is less than request size
ksmbd: fix `force create mode' and `force directory mode'
ksmbd: fix wrong interim response on compound
ksmbd: add support for read compound
ksmbd: switch to use kmemdup_nul() helper
Linus Torvalds [Thu, 31 Aug 2023 22:25:01 +0000 (15:25 -0700)]
Merge tag 'jfs-6.6' of github.com:kleikamp/linux-shaggy
Pull jfs updates from Dave Kleikamp:
"A few small fixes"
* tag 'jfs-6.6' of github.com:kleikamp/linux-shaggy:
jfs: validate max amount of blocks before allocation.
jfs: remove redundant initialization to pointer ip
jfs: fix invalid free of JFS_IP(ipimap)->i_imap in diUnmount
FS: JFS: (trivial) Fix grammatical error in extAlloc
fs/jfs: prevent double-free in dbUnmount() after failed jfs_remount()
Linus Torvalds [Thu, 31 Aug 2023 22:18:15 +0000 (15:18 -0700)]
Merge tag 'ext4_for_linus-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Many ext4 and jbd2 cleanups and bug fixes:
- Cleanups in the ext4 remount code when going to and from read-only
- Cleanups in ext4's multiblock allocator
- Cleanups in the jbd2 setup/mounting code paths
- Performance improvements when appending to a delayed allocation file
- Miscellaneous syzbot and other bug fixes"
* tag 'ext4_for_linus-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (60 commits)
ext4: fix slab-use-after-free in ext4_es_insert_extent()
libfs: remove redundant checks of s_encoding
ext4: remove redundant checks of s_encoding
ext4: reject casefold inode flag without casefold feature
ext4: use LIST_HEAD() to initialize the list_head in mballoc.c
ext4: do not mark inode dirty every time when appending using delalloc
ext4: rename s_error_work to s_sb_upd_work
ext4: add periodic superblock update check
ext4: drop dio overwrite only flag and associated warning
ext4: add correct group descriptors and reserved GDT blocks to system zone
ext4: remove unused function declaration
ext4: mballoc: avoid garbage value from err
ext4: use sbi instead of EXT4_SB(sb) in ext4_mb_new_blocks_simple()
ext4: change the type of blocksize in ext4_mb_init_cache()
ext4: fix unttached inode after power cut with orphan file feature enabled
jbd2: correct the end of the journal recovery scan range
ext4: ext4_get_{dev}_journal return proper error value
ext4: cleanup ext4_get_dev_journal() and ext4_get_journal()
jbd2: jbd2_journal_init_{dev,inode} return proper error return value
jbd2: drop useless error tag in jbd2_journal_wipe()
...
Christian König [Fri, 25 Aug 2023 13:28:00 +0000 (15:28 +0200)]
drm/amdgpu: fix amdgpu_cs_p1_user_fence
The offset is just 32bits here so this can potentially overflow if
somebody specifies a large value. Instead reduce the size to calculate
the last possible offset.
The error handling path incorrectly drops the reference to the user
fence BO resulting in potential reference count underflow.
The problematic IGT test case (i.e. kms_atomic@plane-immutable-zpos) has
been fixed as of commit cb77add45011 ("tests/kms_atomic: remove zpos <
N-planes assert") to the IGT repo. So, reintroduce the reverted code.
mqd_stride function was introduced in commit 2f77b9a242a2
("drm/amdkfd: Update MQD management on multi XCC setup")
but not assigned for gfx11. Fixes a NULL dereference in debugfs.
André Almeida [Thu, 17 Aug 2023 18:20:46 +0000 (15:20 -0300)]
drm/amdgpu: Allocate coredump memory in a nonblocking way
During a GPU reset, a normal memory reclaim could block to reclaim
memory. Giving that coredump is a best effort mechanism, it shouldn't
disturb the reset path. Change its memory allocation flag to a
nonblocking one.
Wenjing Liu [Tue, 15 Aug 2023 14:47:52 +0000 (10:47 -0400)]
drm/amd/display: always switch off ODM before committing more streams
ODM power optimization is only supported with single stream. When ODM
power optimization is enabled, we might not have enough free pipes for
enabling other stream. So when we are committing more than 1 stream we
should first switch off ODM power optimization to make room for new
stream and then allocating pipe resource for the new stream.
Gabe Teeger [Mon, 14 Aug 2023 20:06:18 +0000 (16:06 -0400)]
drm/amd/display: Remove wait while locked
[Why]
We wait for mpc idle while in a locked state, leading to potential
deadlock.
[What]
Move the wait_for_idle call to outside of HW lock. This and a
call to wait_drr_doublebuffer_pending_clear are moved added to a new
static helper function called wait_for_outstanding_hw_updates, to make
the interface clearer.
Wenjing Liu [Mon, 14 Aug 2023 21:11:16 +0000 (17:11 -0400)]
drm/amd/display: update blank state on ODM changes
When we are dynamically adding new ODM slices, we didn't update
blank state, if the pipe used by new ODM slice is previously blanked,
we will continue outputting blank pixel data on that slice causing
right half of the screen showing blank image.
The previous fix was a temporary hack to directly update current state
when committing new state. This could potentially cause hw and sw
state synchronization issues and it is not permitted by dc commit
design.
Fudong Wang [Fri, 11 Aug 2023 00:24:59 +0000 (08:24 +0800)]
drm/amd/display: Add smu write msg id fail retry process
A benchmark stress test (12-40 machines x 48hours) found that DCN315 has
cases where DC writes to an indirect register to set the smu clock msg
id, but when we go to read the same indirect register the returned msg
id doesn't match with what we just set it to. So, to fix this retry the
write until the register's value matches with the requested value.
Wenjing Liu [Tue, 8 Aug 2023 22:49:20 +0000 (18:49 -0400)]
Partially revert "drm/amd/display: update add plane to context logic with a new algorithm"
This partially reverts commit 460ea8980511 ("drm/amd/display: update add
plane to context logic with a new algorithm").
The new secondary pipe allocation logic triggers an issue with a
specific hardware state transition and causes a frame of corruption when
toggling between windowed MPO and ODM desktop only mode. Ideally hwss is
supposed to handle this scenario. We are temporarily reverting the logic
and investigate the root cause why this transition would cause
corruptions.
Fixes: 460ea8980511 ("drm/amd/display: update add plane to context logic with a new algorithm") Reviewed-by: Martin Leung <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Wenjing Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Hamza Mahfooz [Tue, 22 Aug 2023 16:31:09 +0000 (12:31 -0400)]
drm/amd/display: register edp_backlight_control() for DCN301
As made mention of in commit 099303e9a9bd ("drm/amd/display: eDP
intermittent black screen during PnP"), we need to turn off the
display's backlight before powering off an eDP display. Not doing so
will result in undefined behaviour according to the eDP spec. So, set
DCN301's edp_backlight_control() function pointer to
dce110_edp_backlight_control().
Implement the wait for bootloader call back for PSP v13.0 ASICs. Only
for ASICs with PSP v13.0.6, it needs an additional check for VBIOS
mailbox status.
Hamza Mahfooz [Tue, 15 Aug 2023 13:13:37 +0000 (09:13 -0400)]
drm/amdgpu: register a dirty framebuffer callback for fbcon
fbcon requires that we implement &drm_framebuffer_funcs.dirty.
Otherwise, the framebuffer might take a while to flush (which would
manifest as noticeable lag). However, we can't enable this callback for
non-fbcon cases since it may cause too many atomic commits to be made at
once. So, implement amdgpu_dirtyfb() and only enable it for fbcon
framebuffers (we can use the "struct drm_file file" parameter in the
callback to check for this since it is only NULL when called by fbcon,
at least in the mainline kernel) on devices that support atomic KMS.
Linus Torvalds [Thu, 31 Aug 2023 22:02:12 +0000 (15:02 -0700)]
Merge tag 'dlm-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
- Allow blocking posix lock requests to be interrupted while waiting.
This requires a cancel request to be sent to the userspace daemon
where posix lock requests are processed across the cluster.
- Fix a posix lock patch from the previous cycle in which lock requests
from different file systems could be mixed up.
- Fix some long standing problems with nfs posix lock cancelation.
- Add a new debugfs file for printing queued callbacks.
- Stop modifying buffers that have been used to receive a message.
- Misc cleanups and some refactoring.
* tag 'dlm-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: fix plock lookup when using multiple lockspaces
fs: dlm: don't use RCOM_NAMES for version detection
fs: dlm: create midcomms nodes when configure
fs: dlm: constify receive buffer
fs: dlm: drop rxbuf manipulation in dlm_recover_master_copy
fs: dlm: drop rxbuf manipulation in dlm_copy_master_names
fs: dlm: get recovery sequence number as parameter
fs: dlm: cleanup lock order
fs: dlm: remove clear_members_cb
fs: dlm: add plock dev tracepoints
fs: dlm: check on plock ops when exit dlm
fs: dlm: debugfs for queued callbacks
fs: dlm: remove unused processed_nodes
fs: dlm: add missing spin_unlock
fs: dlm: fix F_CANCELLK to cancel pending request
fs: dlm: allow to F_SETLKW getting interrupted
fs: dlm: remove twice newline
Hawking Zhang [Sat, 19 Aug 2023 06:15:08 +0000 (14:15 +0800)]
drm/amdgpu: Fix the return for gpu mode1_reset
amdgpu_device_mode1_reset will return gpu mode1_reset
succeed (ret = 0) as long as wait_for_bootloader call
succeed, regardless of the status reported by smu or
psp firmware. This results to driver continue executing
recovery even smu or psp fail to perform mode1 reset.
Hamza Mahfooz [Fri, 18 Aug 2023 13:11:11 +0000 (09:11 -0400)]
drm/amd/display: fix mode scaling (RMX_.*)
As made mention of in commit 4a2df0d1f28e ("drm/amd/display: Fixed
non-native modes not lighting up"), we shouldn't call
drm_mode_set_crtcinfo() once the crtc timings have been decided. Since,
it can cause settings to be unintentionally overwritten. So, since
dm_state is never NULL now, we can use old_stream to determine if we
should call drm_mode_set_crtcinfo() because we only need to set the crtc
timing parameters for entirely new streams.
Horace Chen [Thu, 17 Aug 2023 09:38:29 +0000 (17:38 +0800)]
drm/amdkfd: use correct method to get clock under SRIOV
[What]
Current SRIOV still using adev->clock.default_XX which gets from
atomfirmware. But these fields are abandoned in atomfirmware long ago.
Which may cause function to return a 0 value.
[How]
We don't need to check whether SR-IOV. For SR-IOV one-vf-mode,
pm is enabled and VF is able to read dpm clock
from pmfw, so we can use dpm clock interface directly. For
multi-VF mode, VF pm is disabled, so driver can just react as pm
disabled. One-vf-mode is introduced from GFX9 so it shall not have
any backward compatibility issue.
projects / linux.git / log