Git Repo - linux.git/log

vxlan: Add missing entries to vxlan_get_size()

There are some attributes added by vxlan_fill_info() which are not
accounted for in vxlan_get_size(). Add them.

I didn't find a way to trigger an actual problem from this miscalculation
since there is usually extra space in netlink size calculations like
if_nlmsg_size(); but maybe I just didn't search long enough.

Fixes: 3511494ce2f3 ("vxlan: Group Policy extension")
Fixes: e1e5314de08b ("vxlan: implement GPE")
Fixes: 0ace2ca89cbd ("vxlan: Use checksum partial with remote checksum offload")
Fixes: f9c4bb0b245c ("vxlan: vni filtering support on collect metadata device")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: rds: Fix possible NULL-pointer dereference

In rds_rdma_cm_event_handler_cmn() check, if conn pointer exists
before dereferencing it as rdma_set_service_type() argument

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: fd261ce6a30e ("rds: rdma: update rdma transport for tos")
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

locking/atomic: scripts: fix fallback ifdeffery

Since commit:

  9257959a6e5b4fca ("locking/atomic: scripts: restructure fallback ifdeffery")

The ordering fallbacks for atomic*_read_acquire() and
atomic*_set_release() erroneously fall back to the implictly relaxed
atomic*_read() and atomic*_set() variants respectively, without any
additional barriers. This loses the ACQUIRE and RELEASE ordering
semantics, which can result in a wide variety of problems, even on
strongly-ordered architectures where the implementation of
atomic*_read() and/or atomic*_set() allows the compiler to reorder those
relative to other accesses.

In practice this has been observed to break bit spinlocks on arm64,
resulting in dentry cache corruption.

The fallback logic was intended to allow ACQUIRE/RELEASE/RELAXED ops to
be defined in terms of FULL ops, but where an op had RELAXED ordering by
default, this unintentionally permitted the ACQUIRE/RELEASE ops to be
defined in terms of the implicitly RELAXED default.

This patch corrects the logic to avoid falling back to implicitly
RELAXED ops, resulting in the same behaviour as prior to commit
9257959a6e5b4fca.

I've verified the resulting assembly on arm64 by generating outlined
wrappers of the atomics. Prior to this patch the compiler generates
sequences using relaxed load (LDR) and store (STR) instructions, e.g.

| <outlined_atomic64_read_acquire>:
|         ldr     x0, [x0]
|         ret
|
| <outlined_atomic64_set_release>:
|         str     x1, [x0]
|         ret

With this patch applied the compiler generates sequences using the
intended load-acquire (LDAR) and store-release (STLR) instructions, e.g.

| <outlined_atomic64_read_acquire>:
|         ldar    x0, [x0]
|         ret
|
| <outlined_atomic64_set_release>:
|         stlr    x1, [x0]
|         ret

To make sure that there were no other victims of the ifdeffery rewrite,
I generated outlined copies of all of the {atomic,atomic64,atomic_long}
atomic operations before and after commit 9257959a6e5b4fca. A diff of
the generated assembly on arm64 shows that only the read_acquire() and
set_release() operations were changed, and only lost their intended
ordering:

| [mark@lakrids:~/src/linux]% diff -u \
| <(aarch64-linux-gnu-objdump -d before-9257959a6e5b4fca.o)
| <(aarch64-linux-gnu-objdump -d after-9257959a6e5b4fca.o)
| --- /proc/self/fd/11    2023-09-19 16:51:51.114779415 +0100
| +++ /proc/self/fd/16    2023-09-19 16:51:51.114779415 +0100
| @@ -1,5 +1,5 @@
|
| -before-9257959a6e5b4fca.o:     file format elf64-littleaarch64
| +after-9257959a6e5b4fca.o:     file format elf64-littleaarch64
|
|
|  Disassembly of section .text:
| @@ -9,7 +9,7 @@
|         4:      d65f03c0        ret
|
|  0000000000000008 <outlined_atomic_read_acquire>:
| -       8:      88dffc00        ldar    w0, [x0]
| +       8:      b9400000        ldr     w0, [x0]
|         c:      d65f03c0        ret
|
|  0000000000000010 <outlined_atomic_set>:
| @@ -17,7 +17,7 @@
|        14:      d65f03c0        ret
|
|  0000000000000018 <outlined_atomic_set_release>:
| -      18:      889ffc01        stlr    w1, [x0]
| +      18:      b9000001        str     w1, [x0]
|        1c:      d65f03c0        ret
|
|  0000000000000020 <outlined_atomic_add>:
| @@ -1230,7 +1230,7 @@
|      1070:      d65f03c0        ret
|
|  0000000000001074 <outlined_atomic64_read_acquire>:
| -    1074:      c8dffc00        ldar    x0, [x0]
| +    1074:      f9400000        ldr     x0, [x0]
|      1078:      d65f03c0        ret
|
|  000000000000107c <outlined_atomic64_set>:
| @@ -1238,7 +1238,7 @@
|      1080:      d65f03c0        ret
|
|  0000000000001084 <outlined_atomic64_set_release>:
| -    1084:      c89ffc01        stlr    x1, [x0]
| +    1084:      f9000001        str     x1, [x0]
|      1088:      d65f03c0        ret
|
|  000000000000108c <outlined_atomic64_add>:
| @@ -2427,7 +2427,7 @@
|      207c:      d65f03c0        ret
|
|  0000000000002080 <outlined_atomic_long_read_acquire>:
| -    2080:      c8dffc00        ldar    x0, [x0]
| +    2080:      f9400000        ldr     x0, [x0]
|      2084:      d65f03c0        ret
|
|  0000000000002088 <outlined_atomic_long_set>:
| @@ -2435,7 +2435,7 @@
|      208c:      d65f03c0        ret
|
|  0000000000002090 <outlined_atomic_long_set_release>:
| -    2090:      c89ffc01        stlr    x1, [x0]
| +    2090:      f9000001        str     x1, [x0]
|      2094:      d65f03c0        ret
|
|  0000000000002098 <outlined_atomic_long_add>:

I've build tested this with a variety of configs for alpha, arm, arm64,
csky, i386, m68k, microblaze, mips, nios2, openrisc, powerpc, riscv,
s390, sh, sparc, x86_64, and xtensa, for which I've seen no issues. I
was unable to build test for ia64 and parisc due to existing build
breakage in v6.6-rc2.

Fixes: 9257959a6e5b4fca ("locking/atomic: scripts: restructure fallback ifdeffery")
Reported-by: Ming Lei <ming.lei@redhat.com>
Reported-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Baokun Li <libaokun1@huawei.com>
Link: https://lkml.kernel.org/r/20230919171430.2697727-1-mark.rutland@arm.com

docs/zh_CN/LoongArch: Update the links of ABI

The current links of ABI can not be found for some time, let us fix
the broken links.

By the way, the latest and official ABI documentation releases are
available at https://github.com/loongson/la-abi-specs, but there are
no Chinese and pdf versions for now, so just do the minimal changes
to update the links so that they can be found, hope there are stable
links in the future.

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

docs/LoongArch: Update the links of ABI

The current links of ABI can not be found for some time, let us fix
the broken links.

By the way, the latest and official ABI documentation releases are
available at https://github.com/loongson/la-abi-specs, but there are
no Chinese and pdf versions for now, so just do the minimal changes
to update the links so that they can be found, hope there are stable
links in the future.

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Don't inline kasan_mem_to_shadow()/kasan_shadow_to_mem()

As Linus suggested, kasan_mem_to_shadow()/kasan_shadow_to_mem() are not
performance-critical and too big to inline. This is simply wrong so just
define them out-of-line.

If they really need to be inlined in future, such as the objtool / SMAP
issue for X86, we should mark them __always_inline.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

kasan: Cleanup the __HAVE_ARCH_SHADOW_MAP usage

As Linus suggested, __HAVE_ARCH_XYZ is "stupid" and "having historical
uses of it doesn't make it good". So migrate __HAVE_ARCH_SHADOW_MAP to
separate macros named after the respective functions.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Set all reserved memblocks on Node#0 at initialization

After commit 61167ad5fecdea ("mm: pass nid to reserve_bootmem_region()")
we get a panic if DEFERRED_STRUCT_PAGE_INIT is enabled:

[    0.000000] CPU 0 Unable to handle kernel paging request at virtual address 0000000000002b82, era == 90000000040e3f28, ra == 90000000040e3f18
[    0.000000] Oops[#1]:
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0+ #733
[    0.000000] pc 90000000040e3f28 ra 90000000040e3f18 tp 90000000046f4000 sp 90000000046f7c90
[    0.000000] a0 0000000000000001 a1 0000000000200000 a2 0000000000000040 a3 90000000046f7ca0
[    0.000000] a4 90000000046f7ca4 a5 0000000000000000 a6 90000000046f7c38 a7 0000000000000000
[    0.000000] t0 0000000000000002 t1 9000000004b00ac8 t2 90000000040e3f18 t3 90000000040f0800
[    0.000000] t4 00000000000f0000 t5 80000000ffffe07e t6 0000000000000003 t7 900000047fff5e20
[    0.000000] t8 aaaaaaaaaaaaaaab u0 0000000000000018 s9 0000000000000000 s0 fffffefffe000000
[    0.000000] s1 0000000000000000 s2 0000000000000080 s3 0000000000000040 s4 0000000000000000
[    0.000000] s5 0000000000000000 s6 fffffefffe000000 s7 900000000470b740 s8 9000000004ad4000
[    0.000000]    ra: 90000000040e3f18 reserve_bootmem_region+0xec/0x21c
[    0.000000]   ERA: 90000000040e3f28 reserve_bootmem_region+0xfc/0x21c
[    0.000000]  CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
[    0.000000]  PRMD: 00000000 (PPLV0 -PIE -PWE)
[    0.000000]  EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
[    0.000000]  ECFG: 00070800 (LIE=11 VS=7)
[    0.000000] ESTAT: 00010800 [PIL] (IS=11 ECode=1 EsubCode=0)
[    0.000000]  BADV: 0000000000002b82
[    0.000000]  PRID: 0014d000 (Loongson-64bit, Loongson-3A6000)
[    0.000000] Modules linked in:
[    0.000000] Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____))
[    0.000000] Stack : 0000000000000000 9000000002eb5430 0000003a00000020 90000000045ccd00
[    0.000000]         900000000470e000 90000000002c1918 0000000000000000 9000000004110780
[    0.000000]         00000000fe6c0000 0000000480000000 9000000004b4e368 9000000004110748
[    0.000000]         0000000000000000 900000000421ca84 9000000004620000 9000000004564970
[    0.000000]         90000000046f7d78 9000000002cc9f70 90000000002c1918 900000000470e000
[    0.000000]         9000000004564970 90000000040bc0e0 90000000046f7d78 0000000000000000
[    0.000000]         0000000000004000 90000000045ccd00 0000000000000000 90000000002c1918
[    0.000000]         90000000002c1900 900000000470b700 9000000004b4df78 9000000004620000
[    0.000000]         90000000046200a8 90000000046200a8 0000000000000000 9000000004218b2c
[    0.000000]         9000000004270008 0000000000000001 0000000000000000 90000000045ccd00
[    0.000000]         ...
[    0.000000] Call Trace:
[    0.000000] [<90000000040e3f28>] reserve_bootmem_region+0xfc/0x21c
[    0.000000] [<900000000421ca84>] memblock_free_all+0x114/0x350
[    0.000000] [<9000000004218b2c>] mm_core_init+0x138/0x3cc
[    0.000000] [<9000000004200e38>] start_kernel+0x488/0x7a4
[    0.000000] [<90000000040df0d8>] kernel_entry+0xd8/0xdc
[    0.000000]
[    0.000000] Code: 02eb21ad  00410f4c  380c31ac <262b818d> 6800b70d  02c1c196  0015001c  57fe4bb1  260002cd

The reason is early memblock_reserve() in memblock_init() set node id to
MAX_NUMNODES, making NODE_DATA(nid) a NULL dereference in the call chain
reserve_bootmem_region() -> init_reserved_page(). After memblock_init(),
those late calls of memblock_reserve() operate on subregions of memblock
.memory regions. As a result, these reserved regions will be set to the
correct node at the first iteration of memmap_init_reserved_pages().

So set all reserved memblocks on Node#0 at initialization can avoid this
panic.

Reported-by: WANG Xuerui <git@xen0n.name>
Tested-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: WANG Xuerui <git@xen0n.name> # with nits addressed
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Remove dead code in relocate_new_kernel

The initial aim is to silence the following objtool warning:

arch/loongarch/kernel/relocate_kernel.o: warning: objtool: relocate_new_kernel+0x74: unreachable instruction

There are two adjacent "b" instructions, the second one is unreachable,
it is dead code, just remove it.

Co-developed-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Co-developed-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Use _UL() and _ULL()

Use _UL() and _ULL() that are provided by const.h.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Fix some build warnings with W=1

There are some building warnings when building LoongArch kernel with W=1
as following, this patch fixes them.

arch/loongarch/kernel/acpi.c:284:13: warning: no previous prototype for ‘acpi_numa_arch_fixup’ [-Wmissing-prototypes]
  284 | void __init acpi_numa_arch_fixup(void) {}
      |             ^~~~~~~~~~~~~~~~~~~~
arch/loongarch/kernel/time.c:32:13: warning: no previous prototype for ‘constant_timer_interrupt’ [-Wmissing-prototypes]
   32 | irqreturn_t constant_timer_interrupt(int irq, void *data)
      |             ^~~~~~~~~~~~~~~~~~~~~~~~
arch/loongarch/kernel/traps.c:496:25: warning: no previous prototype for 'do_fpe' [-Wmissing-prototypes]
  496 | asmlinkage void noinstr do_fpe(struct pt_regs *regs
      |                         ^~~~~~
arch/loongarch/kernel/traps.c:813:22: warning: variable ‘opcode’ set but not used [-Wunused-but-set-variable]
  813 |         unsigned int opcode;
      |                      ^~~~~~
arch/loongarch/kernel/signal.c:895:14: warning: no previous prototype for ‘get_sigframe’ [-Wmissing-prototypes]
  895 | void __user *get_sigframe(struct ksignal *ksig, struct pt_regs *regs,
      |              ^~~~~~~~~~~~
arch/loongarch/kernel/syscall.c:21:40: warning: initialized field overwritten [-Woverride-init]
   21 | #define __SYSCALL(nr, call)     [nr] = (call),
      |                                        ^
arch/loongarch/kernel/syscall.c:40:14: warning: no previous prototype for ‘do_syscall’ [-Wmissing-prototypes]
   40 | void noinstr do_syscall(struct pt_regs *regs)
      |              ^~~~~~~~~~
arch/loongarch/kernel/smp.c:502:17: warning: no previous prototype for ‘start_secondary’ [-Wmissing-prototypes]
  502 | asmlinkage void start_secondary(void)
      |                 ^~~~~~~~~~~~~~~
arch/loongarch/kernel/process.c:309:15: warning: no previous prototype for ‘arch_align_stack’ [-Wmissing-prototypes]
  309 | unsigned long arch_align_stack(unsigned long sp)
      |               ^~~~~~~~~~~~~~~~
arch/loongarch/kernel/topology.c:13:5: warning: no previous prototype for ‘arch_register_cpu’ [-Wmissing-prototypes]
   13 | int arch_register_cpu(int cpu)
      |     ^~~~~~~~~~~~~~~~~
arch/loongarch/kernel/topology.c:27:6: warning: no previous prototype for ‘arch_unregister_cpu’ [-Wmissing-prototypes]
   27 | void arch_unregister_cpu(int cpu)
      |      ^~~~~~~~~~~~~~~~~~~
arch/loongarch/kernel/module-sections.c:103:5: warning: no previous prototype for ‘module_frob_arch_sections’ [-Wmissing-prototypes]
  103 | int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
      |     ^~~~~~~~~~~~~~~~~~~~~~~~~
arch/loongarch/mm/hugetlbpage.c:56:5: warning: no previous prototype for ‘is_aligned_hugepage_range’ [-Wmissing-prototypes]
   56 | int is_aligned_hugepage_range(unsigned long addr, unsigned long len)
      |     ^~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Fix lockdep static memory detection

Since commit 0a6b58c5cd0d ("lockdep: fix static memory detection even
more") the lockdep code uses is_kernel_core_data(), is_kernel_rodata()
and init_section_contains() to verify if a lock is located inside a
kernel static data section.

This change triggers a failure on LoongArch, for which the vmlinux.lds.S
script misses to put the locks (as part of in the .data.rel symbols)
into the Linux data section.

This patch fixes the lockdep problem by moving *(.data.rel*) symbols
into the kernel data section (from _sdata to _edata).

Additionally, move other wrongly assigned symbols too:
- altinstructions into the _initdata section,
- PLT symbols behind the read-only section, and
- *(.la_abs) into the data section.

Cc: stable <stable@kernel.org> # v6.4+
Fixes: 0a6b58c5cd0d ("lockdep: fix static memory detection even more")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

crypto: sm2 - Fix crash caused by uninitialized context

In sm2_compute_z_digest() function, the newly allocated structure
mpi_ec_ctx is used, but forget to initialize it, which will cause
a crash when performing subsequent operations.

Fixes: e5221fa6a355 ("KEYS: asymmetric: Move sm2 code into x509_public_key")
Cc: stable@vger.kernel.org # v6.5
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

cifs: Fix UAF in cifs_demultiplex_thread()

There is a UAF when xfstests on cifs:

  BUG: KASAN: use-after-free in smb2_is_network_name_deleted+0x27/0x160
  Read of size 4 at addr ffff88810103fc08 by task cifsd/923

  CPU: 1 PID: 923 Comm: cifsd Not tainted 6.1.0-rc4+ #45
  ...
  Call Trace:
   <TASK>
   dump_stack_lvl+0x34/0x44
   print_report+0x171/0x472
   kasan_report+0xad/0x130
   kasan_check_range+0x145/0x1a0
   smb2_is_network_name_deleted+0x27/0x160
   cifs_demultiplex_thread.cold+0x172/0x5a4
   kthread+0x165/0x1a0
   ret_from_fork+0x1f/0x30
   </TASK>

  Allocated by task 923:
   kasan_save_stack+0x1e/0x40
   kasan_set_track+0x21/0x30
   __kasan_slab_alloc+0x54/0x60
   kmem_cache_alloc+0x147/0x320
   mempool_alloc+0xe1/0x260
   cifs_small_buf_get+0x24/0x60
   allocate_buffers+0xa1/0x1c0
   cifs_demultiplex_thread+0x199/0x10d0
   kthread+0x165/0x1a0
   ret_from_fork+0x1f/0x30

  Freed by task 921:
   kasan_save_stack+0x1e/0x40
   kasan_set_track+0x21/0x30
   kasan_save_free_info+0x2a/0x40
   ____kasan_slab_free+0x143/0x1b0
   kmem_cache_free+0xe3/0x4d0
   cifs_small_buf_release+0x29/0x90
   SMB2_negotiate+0x8b7/0x1c60
   smb2_negotiate+0x51/0x70
   cifs_negotiate_protocol+0xf0/0x160
   cifs_get_smb_ses+0x5fa/0x13c0
   mount_get_conns+0x7a/0x750
   cifs_mount+0x103/0xd00
   cifs_smb3_do_mount+0x1dd/0xcb0
   smb3_get_tree+0x1d5/0x300
   vfs_get_tree+0x41/0xf0
   path_mount+0x9b3/0xdd0
   __x64_sys_mount+0x190/0x1d0
   do_syscall_64+0x35/0x80
   entry_SYSCALL_64_after_hwframe+0x46/0xb0

The UAF is because:

mount(pid: 921)               | cifsd(pid: 923)
-------------------------------|-------------------------------
                               | cifs_demultiplex_thread
SMB2_negotiate                 |
cifs_send_recv                |
  compound_send_recv           |
   smb_send_rqst               |
    wait_for_response          |
     wait_event_state      [1] |
                               |  standard_receive3
                               |   cifs_handle_standard
                               |    handle_mid
                               |     mid->resp_buf = buf;  [2]
                               |     dequeue_mid           [3]
     KILL the process      [4] |
    resp_iov[i].iov_base = buf |
free_rsp_buf              [5] |
                               |   is_network_name_deleted [6]
                               |   callback

1. After send request to server, wait the response until
    mid->mid_state != SUBMITTED;
2. Receive response from server, and set it to mid;
3. Set the mid state to RECEIVED;
4. Kill the process, the mid state already RECEIVED, get 0;
5. Handle and release the negotiate response;
6. UAF.

It can be easily reproduce with add some delay in [3] - [6].

Only sync call has the problem since async call's callback is
executed in cifsd process.

Add an extra state to mark the mid state to READY before wakeup the
waitter, then it can get the resp safely.

Fixes: ec637e3ffb6b ("[CIFS] Avoid extra large buffer allocation (and memcpy) in cifs_readpages")
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

nouveau/u_memcpya: fix NULL vs error pointer bug

The u_memcpya() function is supposed to return error pointers on
error. Returning NULL will lead to an Oops.

Fixes: e3885f712134 ("nouveau/u_memcpya: use vmemdup_user")
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/10fd258b-466f-4c5b-9d48-fe61a3f21424@moroto.mountain

nouveau/u_memcpya: use vmemdup_user

I think there are limit checks in place for most things but the
new uAPI wants to not have them.

Add a limit check and use the vmemdup_user helper instead.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230810185020.231135-1-airlied@gmail.com

drm/nouveau: sched: fix leaking memory of timedout job

Always stop and re-start the scheduler in order to let the scheduler
free up the timedout job in case it got signaled. In case of exec jobs
the job type specific callback will take care to signal all fences and
tear down the channel.

Fixes: b88baab82871 ("drm/nouveau: implement new VM_BIND uAPI")
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230916162835.5719-1-dakr@redhat.com

drm/nouveau: fence: fix type cast warning in nouveau_fence_emit()

Fix the following warning.

  drivers/gpu/drm/nouveau/nouveau_fence.c:210:45: sparse: sparse:
  incorrect type in initializer (different address spaces)
  @@     expected struct nouveau_channel *chan
  @@     got struct nouveau_channel [noderef] __rcu *channel

We're just about to emit the fence, there is nothing to protect against
yet, hence it is safe to just cast __rcu away.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309140340.BwKXzaDx-lkp@intel.com/
Fixes: 978474dc8278 ("drm/nouveau: fence: fix undefined fence state after emit")
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230916011501.15813-1-dakr@redhat.com

proc: nommu: fix empty /proc/<pid>/maps

On no-MMU, /proc/<pid>/maps reads as an empty file. This happens because
find_vma(mm, 0) always returns NULL (assuming no vma actually contains the
zero address, which is normally the case).

To fix this bug and improve the maintainability in the future, this patch
makes the no-MMU implementation as similar as possible to the MMU
implementation.

The only remaining differences are the lack of hold/release_task_mempolicy
and the extra code to shoehorn the gate vma into the iterator.

This has been tested on top of 6.5.3 on an STM32F746.

Link: https://lkml.kernel.org/r/20230915160055.971059-2-ben.wolsieffer@hefring.com
Fixes: 0c563f148043 ("proc: remove VMA rbtree use from nommu")
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

filemap: add filemap_map_order0_folio() to handle order0 folio

Kernel test robot reported regressions for several benchmarks [1].
The regression are related with commit:
de74976eb65151a2f568e477fc2e0032df5b22b4 ("filemap: add filemap_map_folio_range()")

It turned out that function filemap_map_folio_range() brings these
regressions when handle folio with order0.

Add filemap_map_order0_folio() to handle order0 folio. The benefit
come from two perspectives:
  - the code size is smaller (around 126 bytes)
  - no loop

Testing showed the regressions reported by 0day [1] all are fixed:
commit 9f1f5b60e76d44fa: parent commit of de74976eb65151a2
commit fbdf9263a3d7fdbd: latest mm-unstable commit
commit 7fbfe2003f84686d: this fixing patch

9f1f5b60e76d44fa fbdf9263a3d7fdbd            7fbfe2003f84686d
---------------- --------------------------- ---------------------------
   3843810           -21.4%    3020268            +4.6%    4018708      stress-ng.bad-altstack.ops
     64061           -21.4%      50336            +4.6%      66977      stress-ng.bad-altstack.ops_per_sec

   1709026           -14.4%    1462102            +2.4%    1750757      stress-ng.fork.ops
     28483           -14.4%      24368            +2.4%      29179      stress-ng.fork.ops_per_sec

   3685088           -53.6%    1710976            +0.5%    3702454      stress-ng.zombie.ops
     56732           -65.3%      19667            +0.7%      57107      stress-ng.zombie.ops_per_sec

     61874           -12.1%      54416            +0.4%      62136      vm-scalability.median
  13527663           -11.7%   11942117            -0.1%   13513946      vm-scalability.throughput
4.066e+09           -11.7%   3.59e+09            -0.1%  4.061e+09      vm-scalability.workload

[1]:
https://lore.kernel.org/oe-lkp/72e017b9-deb6-44fa-91d6-716ee2c39cbc@intel.com/T/#m7d2bba30f75a9cee8eab07e5809abd9b3b206c84

Link: https://lkml.kernel.org/r/20230914134741.1937654-1-fengwei.yin@intel.com
Fixes: de74976eb65151a2f568e477fc2e0032df5b22b4 ("filemap: add filemap_map_folio_range()")
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202309111556.b2aa3d7a-oliver.sang@intel.com
Cc: Feng Tang <feng.tang@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

proc: nommu: /proc/<pid>/maps: release mmap read lock

The no-MMU implementation of /proc/<pid>/map doesn't normally release
the mmap read lock, because it uses !IS_ERR_OR_NULL(_vml) to determine
whether to release the lock.  Since _vml is NULL when the end of the
mappings is reached, the lock is not released.

Reading /proc/1/maps twice doesn't cause a hang because it only
takes the read lock, which can be taken multiple times and therefore
doesn't show any problem if the lock isn't released. Instead, you need
to perform some operation that attempts to take the write lock after
reading /proc/<pid>/maps. To actually reproduce the bug, compile the
following code as 'proc_maps_bug':

#include <stdio.h>
#include <unistd.h>
#include <sys/mman.h>

int main(int argc, char *argv[]) {
        void *buf;
        sleep(1);
        buf = mmap(NULL, 4096, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
        puts("mmap returned");
        return 0;
}

Then, run:

  ./proc_maps_bug &; cat /proc/$!/maps; fg

Without this patch, mmap() will hang and the command will never
complete.

This code was incorrectly adapted from the MMU implementation, which at
the time released the lock in m_next() before returning the last entry.

The MMU implementation has diverged further from the no-MMU version since
then, so this patch brings their locking and error handling into sync,
fixing the bug and hopefully avoiding similar issues in the future.

Link: https://lkml.kernel.org/r/20230914163019.4050530-2-ben.wolsieffer@hefring.com
Fixes: 47fecca15c09 ("fs/proc/task_nommu.c: don't use priv->task->mm")
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: memcontrol: fix GFP_NOFS recursion in memory.high enforcement

Breno and Josef report a deadlock scenario from cgroup reclaim
re-entering the filesystem:

[  361.546690] ======================================================
[  361.559210] WARNING: possible circular locking dependency detected
[  361.571703] 6.5.0-0_fbk700_debug_rc0_kbuilder_13159_gbf787a128001 #1 Tainted: G S          E
[  361.589704] ------------------------------------------------------
[  361.602277] find/9315 is trying to acquire lock:
[  361.611625] ffff88837ba140c0 (&delayed_node->mutex){+.+.}-{4:4}, at: __btrfs_release_delayed_node+0x68/0x4f0
[  361.631437]
[  361.631437] but task is already holding lock:
[  361.643243] ffff8881765b8678 (btrfs-tree-01){++++}-{4:4}, at: btrfs_tree_read_lock+0x1e/0x40

[  362.904457]  mutex_lock_nested+0x1c/0x30
[  362.912414]  __btrfs_release_delayed_node+0x68/0x4f0
[  362.922460]  btrfs_evict_inode+0x301/0x770
[  362.982726]  evict+0x17c/0x380
[  362.988944]  prune_icache_sb+0x100/0x1d0
[  363.005559]  super_cache_scan+0x1f8/0x260
[  363.013695]  do_shrink_slab+0x2a2/0x540
[  363.021489]  shrink_slab_memcg+0x237/0x3d0
[  363.050606]  shrink_slab+0xa7/0x240
[  363.083382]  shrink_node_memcgs+0x262/0x3b0
[  363.091870]  shrink_node+0x1a4/0x720
[  363.099150]  shrink_zones+0x1f6/0x5d0
[  363.148798]  do_try_to_free_pages+0x19b/0x5e0
[  363.157633]  try_to_free_mem_cgroup_pages+0x266/0x370
[  363.190575]  reclaim_high+0x16f/0x1f0
[  363.208409]  mem_cgroup_handle_over_high+0x10b/0x270
[  363.246678]  try_charge_memcg+0xaf2/0xc70
[  363.304151]  charge_memcg+0xf0/0x350
[  363.320070]  __mem_cgroup_charge+0x28/0x40
[  363.328371]  __filemap_add_folio+0x870/0xd50
[  363.371303]  filemap_add_folio+0xdd/0x310
[  363.399696]  __filemap_get_folio+0x2fc/0x7d0
[  363.419086]  pagecache_get_page+0xe/0x30
[  363.427048]  alloc_extent_buffer+0x1cd/0x6a0
[  363.435704]  read_tree_block+0x43/0xc0
[  363.443316]  read_block_for_search+0x361/0x510
[  363.466690]  btrfs_search_slot+0xc8c/0x1520

This is caused by the mem_cgroup_handle_over_high() not respecting the
gfp_mask of the allocation context.  We used to only call this function on
resume to userspace, where no locks were held.  But c9afe31ec443 ("memcg:
synchronously enforce memory.high for large overcharges") added a call
from the allocation context without considering the gfp.

Link: https://lkml.kernel.org/r/20230914152139.100822-1-hannes@cmpxchg.org
Fixes: c9afe31ec443 ("memcg: synchronously enforce memory.high for large overcharges")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Breno Leitao <leitao@debian.org>
Reported-by: Josef Bacik <josef@toxicpanda.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org> [5.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

pidfd: prevent a kernel-doc warning

Change the comment to match the function name that the SYSCALL_DEFINE()
macros generate to prevent a kernel-doc warning.

kernel/pid.c:628: warning: expecting prototype for pidfd_open(). Prototype was for sys_pidfd_open() instead

Link: https://lkml.kernel.org/r/20230912060822.2500-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

argv_split: fix kernel-doc warnings

Use proper kernel-doc notation to prevent build warnings:

lib/argv_split.c:36: warning: Function parameter or member 'argv' not described in 'argv_free'
lib/argv_split.c:61: warning: No description found for return value of 'argv_split'

Link: https://lkml.kernel.org/r/20230912060838.3794-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

scatterlist: add missing function params to kernel-doc

Describe missing function parameters to prevent kernel-doc warnings:

lib/scatterlist.c:288: warning: Function parameter or member 'first_chunk' not described in '__sg_alloc_table'
lib/scatterlist.c:800: warning: Function parameter or member 'flags' not described in 'sg_miter_start'

Link: https://lkml.kernel.org/r/20230912060848.4673-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/proc: fixup proc-empty-vm test after KSM changes

/proc/${pid}/smaps_rollup is not empty file even if process's address
space is empty, update the test.

Link: https://lkml.kernel.org/r/725e041f-e9df-4f3d-b267-d4cd2774a78d@p183
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Stefan Roesch <shr@devkernel.io>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

revert "scripts/gdb/symbols: add specific ko module load command"

Revert 11f956538c07 ("scripts/gdb/symbols: add specific ko module load
command") due to breakage identified by Johannes Berg in [1].

Fixes: 11f956538c07 ("scripts/gdb/symbols: add specific ko module load command")
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Closes: https://lkml.kernel.org/r/c44b748307a074d0c250002cdcfe209b8cce93c9.camel@sipsolutions.net [1]
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests: link libasan statically for tests with -fsanitize=address

When dynamically linking, Address Sanitizer requires its library to be the
first one to be loaded; this is apparently to ensure that every call to
malloc is intercepted.  If using LD_PRELOAD, those listed libraries will
be loaded before the libraries listed in the program's ELF and will
therefore violate this requirement, leading to the below failure and
output from ASan.

commit 58e2847ad2e6 ("selftests: line buffer test program's stdout")
modified the kselftest runner to force line buffering by forcing the test
programs to run through `stdbuf`.  It turns out that stdbuf implements
line buffering by injecting a library via LD_PRELOAD.  Therefore selftests
that use ASan started failing.

Fix this by statically linking libasan in the affected test programs,
using the `-static-libasan` option.  Note this is already the default for
Clang, but not got GCC.

Test output sample for failing case:

  TAP version 13
  1..3
  # timeout set to 300
  # selftests: openat2: openat2_test
  # ==4052==ASan runtime does not come first in initial library list;
  you should either link runtime to your application or manually preload
  it with LD_PRELOAD.
  not ok 1 selftests: openat2: openat2_test # exit=1
  # timeout set to 300
  # selftests: openat2: resolve_test
  # ==4070==ASan runtime does not come first in initial library list;
  you should either link runtime to your application or manually preload
  it with LD_PRELOAD.
  not ok 2 selftests: openat2: resolve_test # exit=1

Link: https://lkml.kernel.org/r/20230912135048.1755771-1-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Fixes: 58e2847ad2e6 ("selftests: line buffer test program's stdout")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202309121342.97e2f008-oliver.sang@intel.com
Cc: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

task_work: add kerneldoc annotation for 'data' argument

A previous commit changed the arguments to task_work_cancel_match(), but
didn't document all of them.

Link: https://lkml.kernel.org/r/93938bff-baa3-4091-85f5-784aae297a07@kernel.dk
Fixes: c7aab1a7c52b ("task_work: add helper for more targeted task_work canceling")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309120307.zis3yQGe-lkp@intel.com/
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: page_alloc: fix CMA and HIGHATOMIC landing on the wrong buddy list

Commit 4b23a68f9536 ("mm/page_alloc: protect PCP lists with a spinlock")
bypasses the pcplist on lock contention and returns the page directly to
the buddy list of the page's migratetype.

For pages that don't have their own pcplist, such as CMA and HIGHATOMIC,
the migratetype is temporarily updated such that the page can hitch a ride
on the MOVABLE pcplist.  Their true type is later reassessed when flushing
in free_pcppages_bulk().  However, when lock contention is detected after
the type was already overridden, the bypass will then put the page on the
wrong buddy list.

Once on the MOVABLE buddy list, the page becomes eligible for fallbacks
and even stealing.  In the case of HIGHATOMIC, otherwise ineligible
allocations can dip into the highatomic reserves.  In the case of CMA, the
page can be lost from the CMA region permanently.

Use a separate pcpmigratetype variable for the pcplist override.  Use the
original migratetype when going directly to the buddy.  This fixes the bug
and should make the intentions more obvious in the code.

Originally sent here to address the HIGHATOMIC case:
https://lore.kernel.org/lkml/20230821183733.106619-4-hannes@cmpxchg.org/

Changelog updated in response to the CMA-specific bug report.

[mgorman@techsingularity.net: updated changelog]
Link: https://lkml.kernel.org/r/20230911181108.GA104295@cmpxchg.org
Fixes: 4b23a68f9536 ("mm/page_alloc: protect PCP lists with a spinlock")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Joe Liu <joe.liu@mediatek.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

sh: mm: re-add lost __ref to ioremap_prot() to fix modpost warning

When __ioremap_caller() was replaced by ioremap_prot(), the __ref
annotation added in commit af1415314a4190b8 ("sh: Flag __ioremap_caller()
__init_refok.") was removed, causing a modpost warning:

WARNING: modpost: vmlinux: section mismatch in reference: ioremap_prot+0x88 (section: .text) -> ioremap_fixed (section: .init.text)

ioremap_prot() calls ioremap_fixed() (which is marked __init), but only
before mem_init_done becomes true, so this is safe. Hence fix this by
re-adding the lost __ref.

Link: https://lkml.kernel.org/r/20230911093850.1517389-1-geert+renesas@glider.be
Fixes: 0453c9a78015cb22 ("sh: mm: convert to GENERIC_IOREMAP")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Baoquan He <bhe@redhat.com>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Rich Felker <dalias@libc.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

i2c: designware: fix __i2c_dw_disable() in case master is holding SCL low

The DesignWare IP can be synthesized with the IC_EMPTYFIFO_HOLD_MASTER_EN
parameter.
In this case, when the TX FIFO gets empty and the last command didn't have
the STOP bit (IC_DATA_CMD[9]), the controller will hold SCL low until
a new command is pushed into the TX FIFO or the transfer is aborted.

When the controller is holding SCL low, it cannot be disabled.
The transfer must first be aborted.
Also, the bus recovery won't work because SCL is held low by the master.

Check if the master is holding SCL low in __i2c_dw_disable() before trying
to disable the controller. If SCL is held low, an abort is initiated.
When the abort is done, then proceed with disabling the controller.

This whole situation can happen for instance during SMBus read data block
if the slave just responds with "byte count == 0".
This puts the driver in an unrecoverable state, because the controller is
holding SCL low and the current __i2c_dw_disable() procedure is not
working. In this situation only a SoC reset can fix the i2c bus.

Co-developed-by: Jonathan Borne <jborne@kalray.eu>
Signed-off-by: Jonathan Borne <jborne@kalray.eu>
Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

smb3: do not start laundromat thread when dir leases
disabled

When no directory lease support, or for IPC shares where directories
can not be opened, do not start an unneeded laundromat thread for
that mount (it wastes resources).

Fixes: d14de8067e3f ("cifs: Add a laundromat thread for cached directories")
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

x86/shstk: Add warning for shadow stack double unmap

There are several ways a thread's shadow stacks can get unmapped. This
can happen on exit or exec, as well as error handling in exec or clone.
The task struct already keeps track of the thread's shadow stack. Use the
size variable to keep track of if the shadow stack has already been freed.

When an attempt to double unmap the thread shadow stack is caught, warn
about it and abort the operation.

Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: H.J. Lu <hjl.tools@gmail.com>
Link: https://lore.kernel.org/all/20230908203655.543765-4-rick.p.edgecombe%40intel.com

x86/shstk: Remove useless clone error handling

When clone fails after the shadow stack is allocated, any allocated shadow
stack is cleaned up in exit_thread() in copy_process(). So the logic in
copy_thread() is unneeded, and also will not handle failures that happen
outside of copy_thread().

In addition, since there is a second attempt to unmap the same shadow
stack, there is a race where an newly mapped region could get unmapped.

So remove the logic in copy_thread() and rely on exit_thread() to handle
clone failure.

Fixes: b2926a36b97a ("x86/shstk: Handle thread shadow stack")
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: H.J. Lu <hjl.tools@gmail.com>
Link: https://lore.kernel.org/all/20230908203655.543765-3-rick.p.edgecombe%40intel.com

x86/shstk: Handle vfork clone failure correctly

Shadow stacks are allocated automatically and freed on exit, depending
on the clone flags. The two cases where new shadow stacks are not
allocated are !CLONE_VM (fork()) and CLONE_VFORK (vfork()). For
!CLONE_VM, although a new stack is not allocated, it can be freed normally
because it will happen in the child's copy of the VM.

However, for CLONE_VFORK the parent and the child are actually using the
same shadow stack. So the kernel doesn't need to allocate *or* free a
shadow stack for a CLONE_VFORK child. CLONE_VFORK children already need
special tracking to avoid returning to userspace until the child exits or
execs. Shadow stack uses this same tracking to avoid freeing CLONE_VFORK
shadow stacks.

However, the tracking is not setup until the clone has succeeded
(internally). Which means, if a CLONE_VFORK fails, the existing logic will
not know it is a CLONE_VFORK and proceed to unmap the parents shadow stack.
This error handling cleanup logic runs via exit_thread() in the
bad_fork_cleanup_thread label in copy_process(). The issue was seen in
the glibc test "posix/tst-spawn3-pidfd" while running with shadow stack
using currently out-of-tree glibc patches.

Fix it by not unmapping the vfork shadow stack in the error case as well.
Since clone is implemented in core code, it is not ideal to pass the clone
flags along the error path in order to have shadow stack code have
symmetric logic in the freeing half of the thread shadow stack handling.

Instead use the existing state for thread shadow stacks to track whether
the thread is managing its own shadow stack. For CLONE_VFORK, simply set
shstk->base and shstk->size to 0, and have it mean the thread is not
managing a shadow stack and so should skip cleanup work. Implement this
by breaking up the CLONE_VFORK and !CLONE_VM cases in
shstk_alloc_thread_stack() to separate conditionals since, the logic is
now different between them. In the case of CLONE_VFORK && !CLONE_VM, the
existing behavior is to not clean up the shadow stack in the child (which
should go away quickly with either be exit or exec), so maintain that
behavior by handling the CLONE_VFORK case first in the allocation path.

This new logioc cleanly handles the case of normal, successful
CLONE_VFORK's skipping cleaning up their shadow stack's on exit as well.
So remove the existing, vfork shadow stack freeing logic. This is in
deactivate_mm() where vfork_done is used to tell if it is a vfork child
that can skip cleaning up the thread shadow stack.

Fixes: b2926a36b97a ("x86/shstk: Handle thread shadow stack")
Reported-by: H.J. Lu <hjl.tools@gmail.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: H.J. Lu <hjl.tools@gmail.com>
Link: https://lore.kernel.org/all/20230908203655.543765-2-rick.p.edgecombe%40intel.com

efi/unaccepted: Make sure unaccepted table is mapped

Unaccepted table is now allocated from EFI_ACPI_RECLAIM_MEMORY. It
translates into E820_TYPE_ACPI, which is not added to memblock and
therefore not mapped in the direct mapping.

This causes a crash on the first touch of the table.

Use memblock_add() to make sure that the table is mapped in direct
mapping.

Align the range to the nearest page borders. Ranges smaller than page
size are not mapped.

Fixes: e7761d827e99 ("efi/unaccepted: Use ACPI reclaim memory for unaccepted memory table")
Reported-by: Hongyu Ning <hongyu.ning@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

iomap: convert iomap_unshare_iter to use large folios

Convert iomap_unshare_iter to create large folios if possible, since the
write and zeroing paths already do that. I think this got missed in the
conversion of the write paths that landed in 6.6-rc1.

Cc: ritesh.list@gmail.com, willy@infradead.org
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>

smb3: Add dynamic trace points for RDMA (smbdirect) reconnect

smb3_smbd_connect_done and smb3_smbd_connect_err

To improve debugging of RDMA issues add those two. We already
had dynamic tracepoints for non-RDMA connect done and error cases.

Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

team: fix null-ptr-deref when team device type is changed

Get a null-ptr-deref bug as follows with reproducer [1].

BUG: kernel NULL pointer dereference, address: 0000000000000228
...
RIP: 0010:vlan_dev_hard_header+0x35/0x140 [8021q]
...
Call Trace:
<TASK>
? __die+0x24/0x70
? page_fault_oops+0x82/0x150
? exc_page_fault+0x69/0x150
? asm_exc_page_fault+0x26/0x30
? vlan_dev_hard_header+0x35/0x140 [8021q]
? vlan_dev_hard_header+0x8e/0x140 [8021q]
neigh_connected_output+0xb2/0x100
ip6_finish_output2+0x1cb/0x520
? nf_hook_slow+0x43/0xc0
? ip6_mtu+0x46/0x80
ip6_finish_output+0x2a/0xb0
mld_sendpack+0x18f/0x250
mld_ifc_work+0x39/0x160
process_one_work+0x1e6/0x3f0
worker_thread+0x4d/0x2f0
? __pfx_worker_thread+0x10/0x10
kthread+0xe5/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x34/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30

[1]
$ teamd -t team0 -d -c '{"runner": {"name": "loadbalance"}}'
$ ip link add name t-dummy type dummy
$ ip link add link t-dummy name t-dummy.100 type vlan id 100
$ ip link add name t-nlmon type nlmon
$ ip link set t-nlmon master team0
$ ip link set t-nlmon nomaster
$ ip link set t-dummy up
$ ip link set team0 up
$ ip link set t-dummy.100 down
$ ip link set t-dummy.100 master team0

When enslave a vlan device to team device and team device type is changed
from non-ether to ether, header_ops of team device is changed to
vlan_header_ops. That is incorrect and will trigger null-ptr-deref
for vlan->real_dev in vlan_dev_hard_header() because team device is not
a vlan device.

Cache eth_header_ops in team_setup(), then assign cached header_ops to
header_ops of team net device when its type is changed from non-ether
to ether to fix the bug.

Fixes: 1d76efe1577b ("team: add support for non-ethernet devices")
Suggested-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230918123011.1884401-1-william.xuanziyang@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

ALSA: hda/realtek - ALC287 Realtek I2S speaker platform support

New platform SSID:0x231f.

0x17 was only speaker pin, DAC assigned will be 0x03. Headphone
assigned to 0x02.
Playback via headphone will get EQ filter processing.
So, it needs to swap DAC.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/8d63c6e360124e3ea2523753050e6f05@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hda: cs35l56: Use the new RUNTIME_PM_OPS() macro

Use RUNTIME_PM_OPS() instead of the old SET_RUNTIME_PM_OPS().
This means we don't need __maybe_unused on the functions.

Fixes: 73cfbfa9caea ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230919081153.19793-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

spi: Merge up old fix

This fix was originally queued at the end of the 6.4 cycle but as it was
minor it never actually got sent.

net: bridge: use DEV_STATS_INC()

syzbot/KCSAN reported data-races in br_handle_frame_finish() [1]
This function can run from multiple cpus without mutual exclusion.

Adopt SMP safe DEV_STATS_INC() to update dev->stats fields.

Handles updates to dev->stats.tx_dropped while we are at it.

[1]
BUG: KCSAN: data-race in br_handle_frame_finish / br_handle_frame_finish

read-write to 0xffff8881374b2178 of 8 bytes by interrupt on cpu 1:
br_handle_frame_finish+0xd4f/0xef0 net/bridge/br_input.c:189
br_nf_hook_thresh+0x1ed/0x220
br_nf_pre_routing_finish_ipv6+0x50f/0x540
NF_HOOK include/linux/netfilter.h:304 [inline]
br_nf_pre_routing_ipv6+0x1e3/0x2a0 net/bridge/br_netfilter_ipv6.c:178
br_nf_pre_routing+0x526/0xba0 net/bridge/br_netfilter_hooks.c:508
nf_hook_entry_hookfn include/linux/netfilter.h:144 [inline]
nf_hook_bridge_pre net/bridge/br_input.c:272 [inline]
br_handle_frame+0x4c9/0x940 net/bridge/br_input.c:417
__netif_receive_skb_core+0xa8a/0x21e0 net/core/dev.c:5417
__netif_receive_skb_one_core net/core/dev.c:5521 [inline]
__netif_receive_skb+0x57/0x1b0 net/core/dev.c:5637
process_backlog+0x21f/0x380 net/core/dev.c:5965
__napi_poll+0x60/0x3b0 net/core/dev.c:6527
napi_poll net/core/dev.c:6594 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6727
__do_softirq+0xc1/0x265 kernel/softirq.c:553
run_ksoftirqd+0x17/0x20 kernel/softirq.c:921
smpboot_thread_fn+0x30a/0x4a0 kernel/smpboot.c:164
kthread+0x1d7/0x210 kernel/kthread.c:388
ret_from_fork+0x48/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304

read-write to 0xffff8881374b2178 of 8 bytes by interrupt on cpu 0:
br_handle_frame_finish+0xd4f/0xef0 net/bridge/br_input.c:189
br_nf_hook_thresh+0x1ed/0x220
br_nf_pre_routing_finish_ipv6+0x50f/0x540
NF_HOOK include/linux/netfilter.h:304 [inline]
br_nf_pre_routing_ipv6+0x1e3/0x2a0 net/bridge/br_netfilter_ipv6.c:178
br_nf_pre_routing+0x526/0xba0 net/bridge/br_netfilter_hooks.c:508
nf_hook_entry_hookfn include/linux/netfilter.h:144 [inline]
nf_hook_bridge_pre net/bridge/br_input.c:272 [inline]
br_handle_frame+0x4c9/0x940 net/bridge/br_input.c:417
__netif_receive_skb_core+0xa8a/0x21e0 net/core/dev.c:5417
__netif_receive_skb_one_core net/core/dev.c:5521 [inline]
__netif_receive_skb+0x57/0x1b0 net/core/dev.c:5637
process_backlog+0x21f/0x380 net/core/dev.c:5965
__napi_poll+0x60/0x3b0 net/core/dev.c:6527
napi_poll net/core/dev.c:6594 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6727
__do_softirq+0xc1/0x265 kernel/softirq.c:553
do_softirq+0x5e/0x90 kernel/softirq.c:454
__local_bh_enable_ip+0x64/0x70 kernel/softirq.c:381
__raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline]
_raw_spin_unlock_bh+0x36/0x40 kernel/locking/spinlock.c:210
spin_unlock_bh include/linux/spinlock.h:396 [inline]
batadv_tt_local_purge+0x1a8/0x1f0 net/batman-adv/translation-table.c:1356
batadv_tt_purge+0x2b/0x630 net/batman-adv/translation-table.c:3560
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2703
worker_thread+0x525/0x730 kernel/workqueue.c:2784
kthread+0x1d7/0x210 kernel/kthread.c:388
ret_from_fork+0x48/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304

value changed: 0x00000000000d7190 -> 0x00000000000d7191

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 14848 Comm: kworker/u4:11 Not tainted 6.6.0-rc1-syzkaller-00236-gad8a69f361b9 #0

Fixes: 1c29fc4989bc ("[BRIDGE]: keep track of received multicast packets")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Roopa Prabhu <roopa@nvidia.com>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: bridge@lists.linux-foundation.org
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230918091351.1356153-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

s390/cert_store: fix string length handling

Building cert_store.o with W=1 reveals this bug:

        CC      arch/s390/kernel/cert_store.o
          arch/s390/kernel/cert_store.c:443:45: warning: ‘sprintf’ may write a terminating nul past the end of the destination [-Wformat-overflow=]
            443 |         sprintf(desc + name_len, ":%04u:%08u", vce->vce_hdr.vc_index, cs_token);
                |                                             ^
          arch/s390/kernel/cert_store.c:443:9: note: ‘sprintf’ output between 15 and 18 bytes into a destination of size 15
            443 |         sprintf(desc + name_len, ":%04u:%08u", vce->vce_hdr.vc_index, cs_token);

Fix this by using the correct maximum width for each integer component
in both buffer length calculation and format string. Also switch to
using snprintf() to guard against potential future changes to the
integer range of each component.

Fixes: 8cf57d7217c3 ("s390: add support for user-defined certificates")
Reported-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

s390: update defconfigs

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Merge branch 'there-are-some-bugfix-for-the-hns3-ethernet-driver'

Jijie Shao says:

====================
There are some bugfix for the HNS3 ethernet driver
====================

Link: https://lore.kernel.org/r/20230918074840.2650978-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: hns3: add 5ms delay before clear firmware reset irq source

Currently the reset process in hns3 and firmware watchdog init process is
asynchronous. we think firmware watchdog initialization is completed
before hns3 clear the firmware interrupt source. However, firmware
initialization may not complete early.

so we add delay before hns3 clear firmware interrupt source and 5 ms delay
is enough to avoid second firmware reset interrupt.

Fixes: c1a81619d73a ("net: hns3: Add mailbox interrupt handling to PF driver")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: hns3: fix fail to delete tc flower rules during reset issue

Firmware does not respond driver commands during reset
Therefore, rule will fail to delete while the firmware is resetting

So, if failed to delete rule, set rule state to TO_DEL,
and the rule will be deleted when periodic task being scheduled.

Fixes: 0205ec041ec6 ("net: hns3: add support for hw tc offload of tc flower")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: hns3: only enable unicast promisc when mac table full

Currently, the driver will enable unicast promisc for the function
once configure mac address fail. It's unreasonable when the failure
is caused by using same mac address with other functions. So only
enable unicast promisc when mac table full.

Fixes: c631c696823c ("net: hns3: refactor the promisc mode setting")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: hns3: fix GRE checksum offload issue

The device_version V3 hardware can't offload the checksum for IP in GRE
packets, but can do it for NvGRE. So default to disable the checksum and
GSO offload for GRE, but keep the ability to enable it when only using
NvGRE.

Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: hns3: add cmdq check for vf periodic service task

When the vf cmdq is disabled, there is no need to keep these task running.
So this patch skip these task when the cmdq is disabled.

Fixes: ff200099d271 ("net: hns3: remove unnecessary work in hclgevf_main")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

i2c: i801: unregister tco_pdev in i801_probe() error path

We have to unregister tco_pdev also if i2c_add_adapter() fails.

Fixes: 9424693035a5 ("i2c: i801: Create iTCO device on newer Intel PCHs")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

x86/srso: Fix SBPB enablement for spec_rstack_overflow=off

If the user has requested no SRSO mitigation, other mitigations can use
the lighter-weight SBPB instead of IBPB.

Fixes: fb3bd914b3ec ("x86/srso: Add a Speculative RAS Overflow mitigation")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/b20820c3cfd1003171135ec8d762a0b957348497.1693889988.git.jpoimboe@kernel.org

x86/srso: Don't probe microcode in a guest

To support live migration, the hypervisor sets the "lowest common
denominator" of features.  Probing the microcode isn't allowed because
any detected features might go away after a migration.

As Andy Cooper states:

  "Linux must not probe microcode when virtualised.  What it may see
  instantaneously on boot (owing to MSR_PRED_CMD being fully passed
  through) is not accurate for the lifetime of the VM."

Rely on the hypervisor to set the needed IBPB_BRTYPE and SBPB bits.

Fixes: 1b5277c0ea0b ("x86/srso: Add SRSO_NO support")
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/3938a7209606c045a3f50305d201d840e8c834c7.1693889988.git.jpoimboe@kernel.org

x86/srso: Set CPUID feature bits independently of bug or mitigation status

Booting with mitigations=off incorrectly prevents the
X86_FEATURE_{IBPB_BRTYPE,SBPB} CPUID bits from getting set.

Also, future CPUs without X86_BUG_SRSO might still have IBPB with branch
type prediction flushing, in which case SBPB should be used instead of
IBPB. The current code doesn't allow for that.

Also, cpu_has_ibpb_brtype_microcode() has some surprising side effects
and the setting of these feature bits really doesn't belong in the
mitigation code anyway. Move it to earlier.

Fixes: fb3bd914b3ec ("x86/srso: Add a Speculative RAS Overflow mitigation")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/869a1709abfe13b673bdd10c2f4332ca253a40bc.1693889988.git.jpoimboe@kernel.org

x86/srso: Fix srso_show_state() side effect

Reading the 'spec_rstack_overflow' sysfs file can trigger an unnecessary
MSR write, and possibly even a (handled) exception if the microcode
hasn't been updated.

Avoid all that by just checking X86_FEATURE_IBPB_BRTYPE instead, which
gets set by srso_select_mitigation() if the updated microcode exists.

Fixes: fb3bd914b3ec ("x86/srso: Add a Speculative RAS Overflow mitigation")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/27d128899cb8aee9eb2b57ddc996742b0c1d776b.1693889988.git.jpoimboe@kernel.org

kernel/sched: Modify initial boot task idle setup

Initial booting is setting the task flag to idle (PF_IDLE) by the call
path sched_init() -> init_idle().  Having the task idle and calling
call_rcu() in kernel/rcu/tiny.c means that TIF_NEED_RESCHED will be
set.  Subsequent calls to any cond_resched() will enable IRQs,
potentially earlier than the IRQ setup has completed.  Recent changes
have caused just this scenario and IRQs have been enabled early.

This causes a warning later in start_kernel() as interrupts are enabled
before they are fully set up.

Fix this issue by setting the PF_IDLE flag later in the boot sequence.

Although the boot task was marked as idle since (at least) d80e4fda576d,
I am not sure that it is wrong to do so.  The forced context-switch on
idle task was introduced in the tiny_rcu update, so I'm going to claim
this fixes 5f6130fa52ee.

Fixes: 5f6130fa52ee ("tiny_rcu: Directly force QS when call_rcu_[bh|sched]() on idle_task")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mm/CAMuHMdWpvpWoDa=Ox-do92czYRvkok6_x6pYUH+ZouMcJbXy+Q@mail.gmail.com/

net: stmmac: fix incorrect rxq|txq_stats reference

commit 133466c3bbe1 ("net: stmmac: use per-queue 64 bit statistics
where necessary") caused one regression as found by Uwe, the backtrace
looks like:

INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc1-00449-g133466c3bbe1-dirty #21
Hardware name: STM32 (Device Tree Support)
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x60/0x90
dump_stack_lvl from register_lock_class+0x98c/0x99c
register_lock_class from __lock_acquire+0x74/0x293c
__lock_acquire from lock_acquire+0x134/0x398
lock_acquire from stmmac_get_stats64+0x2ac/0x2fc
stmmac_get_stats64 from dev_get_stats+0x44/0x130
dev_get_stats from rtnl_fill_stats+0x38/0x120
rtnl_fill_stats from rtnl_fill_ifinfo+0x834/0x17f4
rtnl_fill_ifinfo from rtmsg_ifinfo_build_skb+0xc0/0x144
rtmsg_ifinfo_build_skb from rtmsg_ifinfo+0x50/0x88
rtmsg_ifinfo from __dev_notify_flags+0xc0/0xec
__dev_notify_flags from dev_change_flags+0x50/0x5c
dev_change_flags from ip_auto_config+0x2f4/0x1260
ip_auto_config from do_one_initcall+0x70/0x35c
do_one_initcall from kernel_init_freeable+0x2ac/0x308
kernel_init_freeable from kernel_init+0x1c/0x138
kernel_init from ret_from_fork+0x14/0x2c

The reason is the rxq|txq_stats structures are not what expected
because stmmac_open() -> __stmmac_open() the structure is overwritten
by "memcpy(&priv->dma_conf, dma_conf, sizeof(*dma_conf));"
This causes the well initialized syncp member of rxq|txq_stats is
overwritten unexpectedly as pointed out by Johannes and Uwe.

Fix this issue by moving rxq|txq_stats back to stmmac_extra_stats. For
SMP cache friendly, we also mark stmmac_txq_stats and stmmac_rxq_stats
as ____cacheline_aligned_in_smp.

Fixes: 133466c3bbe1 ("net: stmmac: use per-queue 64 bit statistics where necessary")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230917165328.3403-1-jszhang@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

ALSA: usb-audio: scarlett_gen2: Fix another -Wformat-truncation warning

The recent enablement of -Wformat-truncation leads to a false-positive
warning for mixer_scarlett_gen2.c.

For suppressing the warning, replace snprintf() with scnprintf().
As stated in the above, truncation doesn't matter.

Fixes: 78bd8f5126f8 ("ALSA: usb-audio: scarlett_gen2: Fix -Wformat-truncation warning")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230919071205.10684-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

media: imx-mipi-csis: Remove an incorrect fwnode_handle_put() call

The commit in Fixes has removed an fwnode_graph_get_endpoint_by_id() call
in mipi_csis_subdev_init().
So the reference that was taken should not be released anymore in the
error handling path of the probe and in the remove function.

Remove the now incorrect fwnode_handle_put() calls.

Fixes: 1029939b3782 ("media: v4l: async: Simplify async sub-device fwnode matching")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

xen/efi: refactor deprecated strncpy

`strncpy` is deprecated for use on NUL-terminated destination strings [1].

`efi_loader_signature` has space for 4 bytes. We are copying "Xen" (3 bytes)
plus a NUL-byte which makes 4 total bytes. With that being said, there is
currently not a bug with the current `strncpy()` implementation in terms of
buffer overreads but we should favor a more robust string interface
either way.

A suitable replacement is `strscpy` [2] due to the fact that it guarantees
NUL-termination on the destination buffer while being functionally the
same in this case.

Link: www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings[1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230911-strncpy-arch-x86-xen-efi-c-v1-1-96ab2bba2feb@google.com
Signed-off-by: Juergen Gross <jgross@suse.com>

x86/xen: allow nesting of same lazy mode

When running as a paravirtualized guest under Xen, Linux is using
"lazy mode" for issuing hypercalls which don't need to take immediate
effect in order to improve performance (examples are e.g. multiple
PTE changes).

There are two different lazy modes defined: MMU and CPU lazy mode.
Today it is not possible to nest multiple lazy mode sections, even if
they are of the same kind. A recent change in memory management added
nesting of MMU lazy mode sections, resulting in a regression when
running as Xen PV guest.

Technically there is no reason why nesting of multiple sections of the
same kind of lazy mode shouldn't be allowed. So add support for that
for fixing the regression.

Fixes: bcc6cc832573 ("mm: add default definition of set_ptes()")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20230913113828.18421-4-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>

x86/xen: move paravirt lazy code

Only Xen is using the paravirt lazy mode code, so it can be moved to
Xen specific sources.

This allows to make some of the functions static or to merge them into
their only call sites.

While at it do a rename from "paravirt" to "xen" for all moved
specifiers.

No functional change.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20230913113828.18421-3-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>

arm/xen: remove lazy mode related definitions

include/xen/arm/hypervisor.h contains definitions related to paravirt
lazy mode, which are used nowhere in the code.

All paravirt lazy mode related users are in x86 code, so remove the
definitions on Arm side.

Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20230913113828.18421-2-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>

xen: simplify evtchn_do_upcall() call maze

There are several functions involved for performing the functionality
of evtchn_do_upcall():

- __xen_evtchn_do_upcall() doing the real work
- xen_hvm_evtchn_do_upcall() just being a wrapper for
  __xen_evtchn_do_upcall(), exposed for external callers
- xen_evtchn_do_upcall() calling __xen_evtchn_do_upcall(), too, but
  without any user

Simplify this maze by:

- removing the unused xen_evtchn_do_upcall()
- removing xen_hvm_evtchn_do_upcall() as the only left caller of
  __xen_evtchn_do_upcall(), while renaming __xen_evtchn_do_upcall() to
  xen_evtchn_do_upcall()

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Juergen Gross <jgross@suse.com>

iomap: don't skip reading in !uptodate folios when unsharing a range

Prior to commit a01b8f225248e, we would always read in the contents of a
!uptodate folio prior to writing userspace data into the folio,
allocated a folio state object, etc. Ritesh introduced an optimization
that skips all of that if the write would cover the entire folio.

Unfortunately, the optimization misses the unshare case, where we always
have to read in the folio contents since there isn't a data buffer
supplied by userspace. This can result in stale kernel memory exposure
if userspace issues a FALLOC_FL_UNSHARE_RANGE call on part of a shared
file that isn't already cached.

This was caught by observing fstests regressions in the "unshare around"
mechanism that is used for unaligned writes to a reflinked realtime
volume when the realtime extent size is larger than 1FSB, though I think
it applies to any shared file.

Cc: ritesh.list@gmail.com, willy@infradead.org
Fixes: a01b8f225248e ("iomap: Allocate ifs in ->write_begin() early")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>

Merge tag 'nfs-for-6.6-2' of git://git.linux-nfs.org/projects/anna/linux-nfs

Pull NFS client fixes from Anna Schumaker:
"Various O_DIRECT related fixes from Trond:
   - Error handling
   - Locking issues
   - Use the correct commit info for joining page groups
   - Fixes for rescheduling IO

  Sunrpc bad verifier fixes:
   - Report EINVAL errors from connect()
   - Revalidate creds that the server has rejected
   - Revert "SUNRPC: Fail faster on bad verifier"

  Misc:
   - Fix pNFS session trunking when MDS=DS
   - Fix zero-value filehandles for post-open getattr operations
   - Fix compiler warning about tautological comparisons
   - Revert 'SUNRPC: clean up integer overflow check' before Trond's fix"

* tag 'nfs-for-6.6-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  SUNRPC: Silence compiler complaints about tautological comparisons
  Revert "SUNRPC: clean up integer overflow check"
  NFSv4.1: fix zero value filehandle in post open getattr
  NFSv4.1: fix pnfs MDS=DS session trunking
  Revert "SUNRPC: Fail faster on bad verifier"
  SUNRPC: Mark the cred for revalidation if the server rejects it
  NFS/pNFS: Report EINVAL errors from connect() to the server
  NFS: More fixes for nfs_direct_write_reschedule_io()
  NFS: Use the correct commit info in nfs_join_page_group()
  NFS: More O_DIRECT accounting fixes for error paths
  NFS: Fix O_DIRECT locking issues
  NFS: Fix error handling for O_DIRECT write scheduling

netfs: Only call folio_start_fscache() one time for each folio

If a network filesystem using netfs implements a clamp_length()
function, it can set subrequest lengths smaller than a page size.

When we loop through the folios in netfs_rreq_unlock_folios() to
set any folios to be written back, we need to make sure we only
call folio_start_fscache() once for each folio.

Otherwise, this simple testcase:

  mount -o fsc,rsize=1024,wsize=1024 127.0.0.1:/export /mnt/nfs
  dd if=/dev/zero of=/mnt/nfs/file.bin bs=4096 count=1
  1+0 records in
  1+0 records out
  4096 bytes (4.1 kB, 4.0 KiB) copied, 0.0126359 s, 324 kB/s
  echo 3 > /proc/sys/vm/drop_caches
  cat /mnt/nfs/file.bin > /dev/null

will trigger an oops similar to the following:

  page dumped because: VM_BUG_ON_FOLIO(folio_test_private_2(folio))
  ------------[ cut here ]------------
  kernel BUG at include/linux/netfs.h:44!
  ...
  CPU: 5 PID: 134 Comm: kworker/u16:5 Kdump: loaded Not tainted 6.4.0-rc5
  ...
  RIP: 0010:netfs_rreq_unlock_folios+0x68e/0x730 [netfs]
  ...
  Call Trace:
    netfs_rreq_assess+0x497/0x660 [netfs]
    netfs_subreq_terminated+0x32b/0x610 [netfs]
    nfs_netfs_read_completion+0x14e/0x1a0 [nfs]
    nfs_read_completion+0x2f9/0x330 [nfs]
    rpc_free_task+0x72/0xa0 [sunrpc]
    rpc_async_release+0x46/0x70 [sunrpc]
    process_one_work+0x3bd/0x710
    worker_thread+0x89/0x610
    kthread+0x181/0x1c0
    ret_from_fork+0x29/0x50

Fixes: 3d3c95046742 ("netfs: Provide readahead and readpage netfs helpers"
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2210612
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20230608214137.856006-1-dwysocha@redhat.com/
Link: https://lore.kernel.org/r/20230915185704.1082982-1-dwysocha@redhat.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'gfs2-v6.6-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2

Pull gfs2 fixes from Andreas Gruenbacher:

- Fix another freeze/thaw hang

- Fix glock cache shrinking

- Fix the quota=quiet mount option

* tag 'gfs2-v6.6-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Fix quota=quiet oversight
  gfs2: fix glock shrinker ref issues
  gfs2: Fix another freeze/thaw hang

hwmon: (nct6775) Fix non-existent ALARM warning

Skip non-existent ALARM attribute to avoid a shift-out-of-bounds
dmesg warning.

Reported-by: Doug Smythies <dsmythies@telus.net>
Closes: https://lore.kernel.org/linux-hwmon/ZQVzdlHgWdFhOVyQ@debian.me/T/#mc69b690660eb50734a6b07506d74a119e0266f1b
Fixes: b7f1f7b2523a ("hwmon: (nct6775) Additional TEMP registers for nct6799")
Signed-off-by: Ahmad Khalifa <ahmad@khalifa.ws>
Link: https://lore.kernel.org/r/20230918184722.2033225-1-ahmad@khalifa.ws
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

x86/asm: Fix build of UML with KASAN

Building UML with KASAN fails since commit 69d4c0d32186 ("entry, kasan,
x86: Disallow overriding mem*() functions") with the following errors:

$ tools/testing/kunit/kunit.py run --kconfig_add CONFIG_KASAN=y
...
ld: mm/kasan/shadow.o: in function `memset':
shadow.c:(.text+0x40): multiple definition of `memset';
arch/x86/lib/memset_64.o:(.noinstr.text+0x0): first defined here
ld: mm/kasan/shadow.o: in function `memmove':
shadow.c:(.text+0x90): multiple definition of `memmove';
arch/x86/lib/memmove_64.o:(.noinstr.text+0x0): first defined here
ld: mm/kasan/shadow.o: in function `memcpy':
shadow.c:(.text+0x110): multiple definition of `memcpy';
arch/x86/lib/memcpy_64.o:(.noinstr.text+0x0): first defined here

UML does not use GENERIC_ENTRY and is still supposed to be allowed to
override the mem*() functions, so use weak aliases in that case.

Fixes: 69d4c0d32186 ("entry, kasan, x86: Disallow overriding mem*() functions")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20230918-uml-kasan-v3-1-7ad6db477df6@axis.com

gfs2: Fix quota=quiet oversight

Patch eef46ab713f7 introduced a new gfs2 quota=quiet mount option.
Checks for the new option were added to quota.c, but a check in
gfs2_quota_lock_check() was overlooked. This patch adds the missing
check.

Fixes: eef46ab713f7 ("gfs2: Introduce new quota=quiet mount option")
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

gfs2: fix glock shrinker ref issues

Before this patch, function gfs2_scan_glock_lru would only try to free
glocks that had a reference count of 0. But if the reference count ever
got to 0, the glock should have already been freed.

Shrinker function gfs2_dispose_glock_lru checks whether glocks on the
LRU are demote_ok, and if so, tries to demote them. But that's only
possible if the reference count is at least 1.

This patch changes gfs2_scan_glock_lru so it will try to demote and/or
dispose of glocks that have a reference count of 1 and which are either
demotable, or are already unlocked.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

gfs2: Fix another freeze/thaw hang

On a thawed filesystem, the freeze glock is held in shared mode.  In
order to initiate a cluster-wide freeze, the node initiating the freeze
drops the freeze glock and grabs it in exclusive mode.  The other nodes
recognize this as contention on the freeze glock; function
freeze_go_callback is invoked.  This indicates to them that they must
freeze the filesystem locally, drop the freeze glock, and then
re-acquire it in shared mode before being able to unfreeze the
filesystem locally.

While a node is trying to re-acquire the freeze glock in shared mode,
additional contention can occur.  In that case, the node must behave in
the same way as above.

Unfortunately, freeze_go_callback() contains a check that causes it to
bail out when the freeze glock isn't held in shared mode.  Fix that to
allow the glock to be unlocked or held in shared mode.

In addition, update a reference to trylock_super() which has been
renamed to super_trylock_shared() in the meantime.

Fixes: b77b4a4815a9 ("gfs2: Rework freeze / thaw logic")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

MAINTAINERS: Add myself into x86 platform driver maintainers

Hans has been asking for another person to help as the maintainer of
the x86 platform driver because Mark has not been able to find time to
do that. I got asked for the task and have been reviewing the relevant
patches for a while now but lets make it more official by adding the
MAINTAINERS entries.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230918102901.17669-2-ilpo.jarvinen@linux.intel.com
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: thinkpad_acpi: Take mutex in hotkey_resume

hotkey_status_set expects the hotkey_mutex to be held.
It seems like it was missed here and that gives lockdep
warnings while resuming.

Fixes: 38831eaf7d4c ("platform/x86: thinkpad_acpi: use lockdep annotations")
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Dennis Bonke <admin@dennisbonke.com>
Link: https://lore.kernel.org/r/20230914130356.235912-1-admin@dennisbonke.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: intel_scu_ipc: Fail IPC send if still busy

It's possible for interrupts to get significantly delayed to the point
that callers of intel_scu_ipc_dev_command() and friends can call the
function once, hit a timeout, and call it again while the interrupt
still hasn't been processed. This driver will get seriously confused if
the interrupt is finally processed after the second IPC has been sent
with ipc_command(). It won't know which IPC has been completed. This
could be quite disastrous if calling code assumes something has happened
upon return from intel_scu_ipc_dev_simple_command() when it actually
hasn't.

Let's avoid this scenario by simply returning -EBUSY in this case.
Hopefully higher layers will know to back off or fail gracefully when
this happens. It's all highly unlikely anyway, but it's better to be
correct here as we have no way to know which IPC the status register is
telling us about if we send a second IPC while the previous IPC is still
processing.

Cc: Prashant Malani <pmalani@chromium.org>
Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Fixes: ed12f295bfd5 ("ipc: Added support for IPC interrupt mode")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230913212723.3055315-5-swboyd@chromium.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: intel_scu_ipc: Don't override scu in intel_scu_ipc_dev_simple_command()

Andy discovered this bug during patch review. The 'scu' argument to this
function shouldn't be overridden by the function itself. It doesn't make
any sense. Looking at the commit history, we see that commit
f57fa18583f5 ("platform/x86: intel_scu_ipc: Introduce new SCU IPC API")
removed the setting of the scu to ipcdev in other functions, but not
this one. That was an oversight. Remove this line so that we stop
overriding the scu instance that is used by this function.

Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Closes: https://lore.kernel.org/r/ZPjdZ3xNmBEBvNiS@smile.fi.intel.com
Cc: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Fixes: f57fa18583f5 ("platform/x86: intel_scu_ipc: Introduce new SCU IPC API")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230913212723.3055315-4-swboyd@chromium.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: intel_scu_ipc: Check status upon timeout in ipc_wait_for_interrupt()

It's possible for the completion in ipc_wait_for_interrupt() to timeout,
simply because the interrupt was delayed in being processed. A timeout
in itself is not an error. This driver should check the status register
upon a timeout to ensure that scheduling or interrupt processing delays
don't affect the outcome of the IPC return value.

CPU0                                                   SCU
----                                                   ---
ipc_wait_for_interrupt()
  wait_for_completion_timeout(&scu->cmd_complete)
  [TIMEOUT]                                             status[IPC_STATUS_BUSY]=0

Fix this problem by reading the status bit in all cases, regardless of
the timeout. If the completion times out, we'll assume the problem was
that the IPC_STATUS_BUSY bit was still set, but if the status bit is
cleared in the meantime we know that we hit some scheduling delay and we
should just check the error bit.

Cc: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Fixes: ed12f295bfd5 ("ipc: Added support for IPC interrupt mode")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230913212723.3055315-3-swboyd@chromium.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: intel_scu_ipc: Check status after timeout in busy_loop()

It's possible for the polling loop in busy_loop() to get scheduled away
for a long time.

  status = ipc_read_status(scu); // status = IPC_STATUS_BUSY
  <long time scheduled away>
  if (!(status & IPC_STATUS_BUSY))

If this happens, then the status bit could change while the task is
scheduled away and this function would never read the status again after
timing out. Instead, the function will return -ETIMEDOUT when it's
possible that scheduling didn't work out and the status bit was cleared.
Bit polling code should always check the bit being polled one more time
after the timeout in case this happens.

Fix this by reading the status once more after the while loop breaks.
The readl_poll_timeout() macro implements all of this, and it is
shorter, so use that macro here to consolidate code and fix this.

There were some concerns with using readl_poll_timeout() because it uses
timekeeping, and timekeeping isn't running early on or during the late
stages of system suspend or early stages of system resume, but an audit
of the code concluded that this code isn't called during those times so
it is safe to use the macro.

Cc: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Fixes: e7b7ab3847c9 ("platform/x86: intel_scu_ipc: Sleeping is fine when polling")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230913212723.3055315-2-swboyd@chromium.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

spi: imx: Take in account bits per word instead of assuming 8-bits

The IMX spi driver has a hardcoded 8, breaking the driver for word
lengths other than 8.

Signed-off-by: Stefan Moring <stefanmoring@gmail.com>
Reported-by: Sebastian Reichel <sre@kernel.org>
Fixes: 15a6af94a277 ("spi: Increase imx51 ecspi burst length based on transfer length")
Tested-by: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20230917164037.29284-1-stefanmoring@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge branch 'ax25-project-links'

Peter Lafreniere says:

====================
ax25: Update link for linux-ax25.org

http://linux-ax25.org has been down for nearly a year. Its official
replacement is https://linux-ax25.in-berlin.de.

Update all references to the dead link to its replacement.

As the three touched files are in different areas of the tree, this is
being sent with one patch per file.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

ax25: Kconfig: Update link for linux-ax25.org

http://linux-ax25.org has been down for nearly a year. Its official
replacement is https://linux-ax25.in-berlin.de. Change all references to
the old site in the ax25 Kconfig to its replacement.

Link: https://marc.info/?m=166792551600315
Signed-off-by: Peter Lafreniere <peter@n8pjl.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS: Update link for linux-ax25.org

http://linux-ax25.org has been down for nearly a year. Its official
replacement is https://linux-ax25.in-berlin.de. Update all links to the
new URL.

Link: https://marc.info/?m=166792551600315
Signed-off-by: Peter Lafreniere <peter@n8pjl.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation: netdev: fix dead link in ax25.rst

http://linux-ax25.org has been down for nearly a year. Its official
replacement is https://linux-ax25.in-berlin.de.

Update the documentation to point there instead. And acknowledge that
while the linux-hams list isn't entirely dead, it isn't what most would
call 'active'. Remove that word.

Link: https://marc.info/?m=166792551600315
Signed-off-by: Peter Lafreniere <peter@n8pjl.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'mptcp-stalled-connections-fix'

Matthieu Baerts says:

====================
mptcp: fix stalled connections

Daire reported a few issues with MPTCP where some connections were
stalled in different states. Paolo did a great job fixing them.

Patch 1 fixes bogus receive window shrinkage with multiple subflows. Due
to a race condition and unlucky circumstances, that may lead to
TCP-level window shrinkage, and the connection being stalled on the
sender end.

Patch 2 is a preparation for patch 3 which processes pending subflow
errors on close. Without that and under specific circumstances, the
MPTCP-level socket might not switch to the CLOSE state and stall.

Patch 4 is also a preparation patch for the next one. Patch 5 fixes
MPTCP connections not switching to the CLOSE state when all subflows
have been closed but no DATA_FIN have been exchanged to explicitly close
the MPTCP connection. Now connections in such state will switch to the
CLOSE state after a timeout, still allowing the "make-after-break"
feature but making sure connections don't stall forever. It will be
possible to modify this timeout -- currently matching TCP TIMEWAIT value
(60 seconds) -- in a future version.
====================

Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>

mptcp: fix dangling connection hang-up

According to RFC 8684 section 3.3:

A connection is not closed unless [...] or an implementation-specific
connection-level send timeout.

Currently the MPTCP protocol does not implement such timeout, and
connection timing-out at the TCP-level never move to close state.

Introduces a catch-up condition at subflow close time to move the
MPTCP socket to close, too.

That additionally allows removing similar existing inside the worker.

Finally, allow some additional timeout for plain ESTABLISHED mptcp
sockets, as the protocol allows creating new subflows even at that
point and making the connection functional again.

This issue is actually present since the beginning, but it is basically
impossible to solve without a long chain of functional pre-requisites
topped by commit bbd49d114d57 ("mptcp: consolidate transition to
TCP_CLOSE in mptcp_do_fastclose()"). When backporting this current
patch, please also backport this other commit as well.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/430
Fixes: e16163b6e2b7 ("mptcp: refactor shutdown and close")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: rename timer related helper to less confusing names

The msk socket uses to different timeout to track close related
events and retransmissions. The existing helpers do not indicate
clearly which timer they actually touch, making the related code
quite confusing.

Change the existing helpers name to avoid such confusion. No
functional change intended.

This patch is linked to the next one ("mptcp: fix dangling connection
hang-up"). The two patches are supposed to be backported together.

Cc: stable@vger.kernel.org # v5.11+
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: process pending subflow error on close

On incoming TCP reset, subflow closing could happen before error
propagation. That in turn could cause the socket error being ignored,
and a missing socket state transition, as reported by Daire-Byrne.

Address the issues explicitly checking for subflow socket error at
close time. To avoid code duplication, factor-out of __mptcp_error_report()
a new helper implementing the relevant bits.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/429
Fixes: 15cc10453398 ("mptcp: deliver ssk errors to msk")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: move __mptcp_error_report in protocol.c

This will simplify the next patch ("mptcp: process pending subflow error
on close").

No functional change intended.

Cc: stable@vger.kernel.org # v5.12+
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: fix bogus receive window shrinkage with multiple subflows

In case multiple subflows race to update the mptcp-level receive
window, the subflow losing the race should use the window value
provided by the "winning" subflow to update it's own tcp-level
rcv_wnd.

To such goal, the current code bogusly uses the mptcp-level rcv_wnd
value as observed before the update attempt. On unlucky circumstances
that may lead to TCP-level window shrinkage, and stall the other end.

Address the issue feeding to the rcv wnd update the correct value.

Fixes: f3589be0c420 ("mptcp: never shrink offered window")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/427
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

thermal: sysfs: Fix trip_point_hyst_store()

After commit 2e38a2a981b2 ("thermal/core: Add a generic thermal_zone_set_trip()
function") updating a trip point temperature doesn't actually work,
because the value supplied by user space is subsequently overwritten
with the current trip point hysteresis value.

Fix this by changing the code to parse the number string supplied by
user space after retrieving the current trip point data from the
thermal zone.

Also drop a redundant tab character from the code in question.

Fixes: 2e38a2a981b2 ("thermal/core: Add a generic thermal_zone_set_trip() function")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 6.3+ <stable@vger.kernel.org> # 6.3+

arm64: Document missing userspace visible fields in ID_AA64ISAR2_EL1

We have exposed a number of fields in ID_AA64ISAR2_EL1 to userspace without
adding the matching documentation in cpu-feature-registers.rst, update it
to match the implementation.

Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20230914-arm64-feat-hbc-doc-v1-2-797d25f06897@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>

ACPI: processor: Fix uninitialized access of buf in acpi_set_pdc_bits()

A bug was introduced during unification of setting CAP_SMP_T_SWCOORD for
the _PDC and _OSC methods.

The third u32 in the buffer is never cleared before setting bits on it.
The memory is not guaranteed to be zero as it was allocated by kmalloc()
instead of kzalloc().

Fix this by initializing the third u32 in the buffer to 0.

Fixes: b9e8d0168a7a ("ACPI: processor: Set CAP_SMP_T_SWCOORD in arch_acpi_set_proc_cap_bits()")
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

arm64/hbc: Document HWCAP2_HBC

When we added support for FEAT_HBC we added a new hwcap but did not
document that we had done so, add the documentation.

Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20230914-arm64-feat-hbc-doc-v1-1-797d25f06897@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>

arm64/sme: Include ID_AA64PFR1_EL1.SME in cpu-feature-registers.rst

We expose ID_AA64PFR1_EL1.SME to userspace but do not document this in
cpu-feature-registers.rst. Add it.

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230914-arm64-pfr1-sme-doc-v1-1-b6c497d10d77@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>

arm64: cpufeature: Fix CLRBHB and BC detection

ClearBHB support is indicated by the CLRBHB field in ID_AA64ISAR2_EL1.
Following some refactoring the kernel incorrectly checks the BC field
instead. Fix the detection to use the right field.

(Note: The original ClearBHB support had it as FTR_HIGHER_SAFE, but this
patch uses FTR_LOWER_SAFE, which seems more correct.)

Also fix the detection of BC (hinted conditional branches) to use
FTR_LOWER_SAFE, so that it is not reported on mismatched systems.

Fixes: 356137e68a9f ("arm64/sysreg: Make BHB clear feature defines match the architecture")
Fixes: 8fcc8285c0e3 ("arm64/sysreg: Convert ID_AA64ISAR2_EL1 to automatic generation")
Cc: stable@vger.kernel.org
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230912133429.2606875-1-kristina.martsenko@arm.com
Signed-off-by: Will Deacon <will@kernel.org>

Merge branch 'tsnep-napi-fixes'

Gerhard Engleder says:

====================
tsnep: Fixes based on napi.rst

Based on the documentation networking/napi.rst some fixes have been
done. tsnep driver should be in line with this new documentation after
these fixes.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

tsnep: Fix NAPI polling with budget 0

According to the NAPI documentation networking/napi.rst, Rx specific
APIs like page pool and XDP cannot be used at all when budget is 0.
skb Tx processing should happen regardless of the budget.

Stop NAPI polling after Tx processing and skip Rx processing if budget
is 0.

Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>