Linus Torvalds [Fri, 15 Nov 2024 18:53:42 +0000 (10:53 -0800)]
Merge tag 'drm-fixes-2024-11-16' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Final week of fixes, lots of small amdgpu fixes, some i915 and xe
fixes, the nouveau changes fix a recent regression and some laptop
panel black screens, then a couple of other misc ones.
It's probably a little busier than I'd like, but each fix seems fine.
amdgpu:
- PSR fix
- Panel replay fixes
- DML fix
- vblank power fix
- Fix video caps
- SMU 14.0 fix
- GPUVM fix
- MES 12 fix
- APU carve out fix
- DC vbios fix
- NBIO fix
i915:
- Don't load GSC on ARL-H and ARL-U if too old FW
- Avoid potential OOPS in enabling/disabling TV output
xe:
- Fix unlock on exec ioctl error path
- Fix hibernation on LNL due to ggtt getting lost
- Fix missing runtime PM in OA release
bridge:
- tc358768: Fix DSI command tx
nouveau:
- Fix GSP AUX error handling
- dp: Handle retires for AUX CH transfers with GSP
- fw: Sync DMA after setup
panthor:
- Fix partial BO mappings to GPU
rockchip:
- vop: Avoid null-ptr deref in plane-state check
vmwgfx:
- Avoid null-ptr deref in surface creation"
* tag 'drm-fixes-2024-11-16' of https://gitlab.freedesktop.org/drm/kernel: (27 commits)
drm/bridge: tc358768: Fix DSI command tx
drm/vmwgfx: avoid null_ptr_deref in vmw_framebuffer_surface_create_handle
nouveau/dp: handle retries for AUX CH transfers with GSP.
nouveau: handle EBUSY and EAGAIN for GSP aux errors.
nouveau: fw: sync dma after setup is called.
drm/xe/oa: Fix "Missing outer runtime PM protection" warning
drm/xe: handle flat ccs during hibernation on igpu
drm/xe: improve hibernation on igpu
drm/xe: Restore system memory GGTT mappings
drm/xe: Ensure all locks released in exec IOCTL
drm/panthor: Fix handling of partial GPU mapping of BOs
drm/amd: Fix initialization mistake for NBIO 7.7.0
Revert "drm/amd/display: parse umc_info or vram_info based on ASIC"
drm/amd/display: Fix failure to read vram info due to static BP_RESULT
drm/amdgpu: enable GTT fallback handling for dGPUs only
drm/i915: Grab intel_display from the encoder to avoid potential oopsies
drm/i915/gsc: ARL-H and ARL-U need a newer GSC FW.
drm/amdgpu/mes12: correct kiq unmap latency
drm/amdgpu: fix check in gmc_v9_0_get_vm_pte()
drm/amd/pm: print pp_dpm_mclk in ascending order on SMU v14.0.0
...
Linus Torvalds [Fri, 15 Nov 2024 18:48:28 +0000 (10:48 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
- Revert a change to the VLAN logic, this broke previously working ROCE
configurations
- Fix a memory leak on error unwinding in bnxt_re
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
Revert "RDMA/core: Fix ENODEV error for iWARP test over vlan"
RDMA/bnxt_re: Remove some dead code
RDMA/bnxt_re: Fix some error handling paths in bnxt_re_probe()
Dave Airlie [Fri, 15 Nov 2024 18:31:09 +0000 (04:31 +1000)]
Merge tag 'drm-xe-fixes-2024-11-14' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Fix unlock on exec ioctl error path (Matthew Brost)
- Fix hibernation on LNL due to ggtt getting lost
(Matthew Brost / Matthew Auld)
- Fix missing runtime PM in OA release (Ashutosh)
Linus Torvalds [Fri, 15 Nov 2024 18:20:17 +0000 (10:20 -0800)]
Merge tag 'pmdomain-v6.12-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
"pmdomain core:
- Add GENPD_FLAG_DEV_NAME_FW flag to generate unique names
pmdomain providers:
- arm: Use FLAG_DEV_NAME_FW to ensure unique names
- imx93-blk-ctrl: Fix the remove path
arm_scmi/qcom-cpucp:
- Report duplicate OPPs as firmware bugs for arm_scmi
- Skip OPP duplicates for arm_scmi
- Mark the qcom-cpucp mailbox irq with IRQF_NO_SUSPEND flag"
* tag 'pmdomain-v6.12-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
mailbox: qcom-cpucp: Mark the irq with IRQF_NO_SUSPEND flag
firmware: arm_scmi: Report duplicate opps as firmware bugs
firmware: arm_scmi: Skip opp duplicates
pmdomain: imx93-blk-ctrl: correct remove path
pmdomain: arm: Use FLAG_DEV_NAME_FW to ensure unique names
pmdomain: core: Add GENPD_FLAG_DEV_NAME_FW flag
Linus Torvalds [Fri, 15 Nov 2024 18:09:38 +0000 (10:09 -0800)]
Merge tag 'sound-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A few last-minute fixes. All changes are device-specific small fixes
that should be pretty safe to apply"
* tag 'sound-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek - update set GPIO3 to default for Thinkpad with ALC1318
ALSA: hda/realtek: fix mute/micmute LEDs for a HP EliteBook 645 G10
ALSA: hda/realtek - Fixed Clevo platform headset Mic issue
ALSA: usb-audio: Fix Yamaha P-125 Quirk Entry
ASoC: max9768: Fix event generation for playback mute
ASoC: intel: sof_sdw: add quirk for Dell SKU
ASoC: audio-graph-card2: Purge absent supplies for device tree nodes
Linus Torvalds [Fri, 15 Nov 2024 17:59:51 +0000 (09:59 -0800)]
Merge tag 'sched_ext-for-6.12-rc7-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fix from Tejun Heo:
"One more fix for v6.12-rc7
ops.cpu_acquire() was being invoked with the wrong kfunc mask allowing
the operation to call kfuncs which shouldn't be allowed. Fix it by
using SCX_KF_REST instead, which is trivial and low risk"
* tag 'sched_ext-for-6.12-rc7-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: ops.cpu_acquire() should be called with SCX_KF_REST
Tejun Heo [Thu, 14 Nov 2024 18:50:58 +0000 (08:50 -1000)]
sched_ext: ops.cpu_acquire() should be called with SCX_KF_REST
ops.cpu_acquire() is currently called with 0 kf_maks which is interpreted as
SCX_KF_UNLOCKED which allows all unlocked kfuncs, but ops.cpu_acquire() is
called from balance_one() under the rq lock and should only be allowed call
kfuncs that are safe under the rq lock. Update it to use SCX_KF_REST.
Linus Torvalds [Thu, 14 Nov 2024 18:00:23 +0000 (10:00 -0800)]
Merge tag 'bcachefs-2024-11-13' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"This fixes one minor regression from the btree cache fixes (in the
scan_for_btree_nodes repair path) - and the shutdown path fix is the
big one here, in terms of bugs closed:
The shutdown path wasn't flushing the btree write buffer, leading
to shutting down while we still had operations in flight. This
fixes a whole slew of syzbot bugs, and undoubtedly other strange
heisenbugs.
* tag 'bcachefs-2024-11-13' of git://evilpiepirate.org/bcachefs:
bcachefs: Fix assertion pop in bch2_ptr_swab()
bcachefs: Fix journal_entry_dev_usage_to_text() overrun
bcachefs: Allow for unknown key types in backpointers fsck
bcachefs: Fix assertion pop in topology repair
bcachefs: Fix hidden btree errors when reading roots
bcachefs: Fix validate_bset() repair path
bcachefs: Fix missing validation for bch_backpointer.level
bcachefs: Fix bch_member.btree_bitmap_shift validation
bcachefs: bch2_btree_write_buffer_flush_going_ro()
Takashi Iwai [Thu, 14 Nov 2024 15:40:15 +0000 (16:40 +0100)]
Merge tag 'asoc-fix-v6.12-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.12
Some last updates for v6.12, one quirk plus a couple of fixes. One is a
minor fix for a relatively obscure driver and the other is a relatively
important fix for boot hangs with some audio graph based cards.
Josef Bacik [Wed, 13 Nov 2024 16:05:13 +0000 (11:05 -0500)]
btrfs: fix incorrect comparison for delayed refs
When I reworked delayed ref comparison in cf4f04325b2b ("btrfs: move
->parent and ->ref_root into btrfs_delayed_ref_node"), I made a mistake
and returned -1 for the case where ref1->ref_root was > than
ref2->ref_root. This is a subtle bug that can result in improper
delayed ref running order, which can result in transaction aborts.
net: sched: u32: Add test case for systematic hnode IDR leaks
Add a tdc test case to exercise the just-fixed systematic leak of
IDR entries in u32 hnode disposal. Given the IDR in question is
confined to the range [1..0x7FF], it is sufficient to create/delete
the same filter 2048 times to fill it up and get a nonzero exit
status from "tc filter add".
Wait for the command transmission to be completed in the DSI transfer
function polling for the dc_start bit to go back to idle state after the
transmission is started.
This is documented in the datasheet and failures to do so lead to
commands corruption.
====================
bonding: fix ns targets not work on hardware NIC
The first patch fixed ns targets not work on hardware NIC when bonding
set arp_validate.
The second patch add a related selftest for bonding.
v4: Thanks Nikolay for the comments:
use bond_slave_ns_maddrs_{add/del} with clear name
fix comments typos
remove _slave_set_ns_maddrs underscore directly
update bond_option_arp_validate_set() change logic
v3: use ndisc_mc_map to convert the mcast mac address (Jay Vosburgh)
v2: only add/del mcast group on backup slaves when arp_validate is set (Jay Vosburgh)
arp_validate doesn't support 3ad, tlb, alb. So let's only do it on ab mode.
====================
Hangbin Liu [Mon, 11 Nov 2024 10:16:49 +0000 (10:16 +0000)]
bonding: add ns target multicast address to slave device
Commit 4598380f9c54 ("bonding: fix ns validation on backup slaves")
tried to resolve the issue where backup slaves couldn't be brought up when
receiving IPv6 Neighbor Solicitation (NS) messages. However, this fix only
worked for drivers that receive all multicast messages, such as the veth
interface.
For standard drivers, the NS multicast message is silently dropped because
the slave device is not a member of the NS target multicast group.
To address this, we need to make the slave device join the NS target
multicast group, ensuring it can receive these IPv6 NS messages to validate
the slave’s status properly.
There are three policies before joining the multicast group:
1. All settings must be under active-backup mode (alb and tlb do not support
arp_validate), with backup slaves and slaves supporting multicast.
2. We can add or remove multicast groups when arp_validate changes.
3. Other operations, such as enslaving, releasing, or setting NS targets,
need to be guarded by arp_validate.
Fixes: 4e24be018eb9 ("bonding: add new parameter ns_targets") Signed-off-by: Hangbin Liu <[email protected]> Reviewed-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
Meghana Malladi [Mon, 11 Nov 2024 09:58:42 +0000 (15:28 +0530)]
net: ti: icssg-prueth: Fix 1 PPS sync
The first PPS latch time needs to be calculated by the driver
(in rounded off seconds) and configured as the start time
offset for the cycle. After synchronizing two PTP clocks
running as master/slave, missing this would cause master
and slave to start immediately with some milliseconds
drift which causes the PPS signal to never synchronize with
the PTP master.
Chen Ridong [Tue, 29 Oct 2024 08:34:29 +0000 (08:34 +0000)]
drm/vmwgfx: avoid null_ptr_deref in vmw_framebuffer_surface_create_handle
The 'vmw_user_object_buffer' function may return NULL with incorrect
inputs. To avoid possible null pointer dereference, add a check whether
the 'bo' is NULL in the vmw_framebuffer_surface_create_handle.
net: stmmac: dwmac-mediatek: Fix inverted handling of mediatek,mac-wol
The mediatek,mac-wol property is being handled backwards to what is
described in the binding: it currently enables PHY WOL when the property
is present and vice versa. Invert the driver logic so it matches the
binding description.
Breno Leitao [Fri, 8 Nov 2024 14:08:36 +0000 (06:08 -0800)]
ipmr: Fix access to mfc_cache_list without lock held
Accessing `mr_table->mfc_cache_list` is protected by an RCU lock. In the
following code flow, the RCU read lock is not held, causing the
following error when `RCU_PROVE` is not held. The same problem might
show up in the IPv6 code path.
6.12.0-rc5-kbuilder-01145-gbac17284bdcb #33 Tainted: G E N
-----------------------------
net/ipv4/ipmr_base.c:313 RCU-list traversed in non-reader section!!
This is not a problem per see, since the RTNL lock is held here, so, it
is safe to iterate in the list without the RCU read lock, as suggested
by Eric.
To alleviate the concern, modify the code to use
list_for_each_entry_rcu() with the RTNL-held argument.
The annotation will raise an error only if RTNL or RCU read lock are
missing during iteration, signaling a legitimate problem, otherwise it
will avoid this false positive.
This will solve the IPv6 case as well, since ip6mr_rtm_dumproute() calls
this function as well.
Wei Fang [Tue, 12 Nov 2024 03:03:47 +0000 (11:03 +0800)]
samples: pktgen: correct dev to DEV
In the pktgen_sample01_simple.sh script, the device variable is uppercase
'DEV' instead of lowercase 'dev'. Because of this typo, the script cannot
enable UDP tx checksum.
net: phylink: ensure PHY momentary link-fails are handled
Normally, phylib won't notify changes in quick succession. However, as
a result of commit 3e43b903da04 ("net: phy: Immediately call
adjust_link if only tx_lpi_enabled changes") this is no longer true -
it is now possible that phy_link_down() and phy_link_up() will both
complete before phylink's resolver has run, which means it'll miss that
pl->phy_state.link momentarily became false.
Rename "mac_link_dropped" to be more generic "link_failed" since it will
cover more than the MAC/PCS end of the link failing, and arrange to set
this in phylink_phy_change() if we notice that the PHY reports that the
link is down.
This will ensure that we capture an EEE reconfiguration event.
Jakub Kicinski [Thu, 14 Nov 2024 02:51:09 +0000 (18:51 -0800)]
Merge branch 'mptcp-pm-a-few-more-fixes'
Matthieu Baerts says:
====================
mptcp: pm: a few more fixes
Three small fixes related to the MPTCP path-manager:
- Patch 1: correctly reflect the backup flag to the corresponding local
address entry of the userspace path-manager. A fix for v5.19.
- Patch 2: hold the PM lock when deleting an entry from the local
addresses of the userspace path-manager to avoid messing up with this
list. A fix for v5.19.
- Patch 3: use _rcu variant to iterate the in-kernel path-manager's
local addresses list, when under rcu_read_lock(). A fix for v5.17.
====================
In mptcp_pm_create_subflow_or_signal_addr(), rcu_read_(un)lock() are
used as expected to iterate over the list of local addresses, but
list_for_each_entry() was used instead of list_for_each_entry_rcu() in
__lookup_addr(). It is important to use this variant which adds the
required READ_ONCE() (and diagnostic checks if enabled).
Because __lookup_addr() is also used in mptcp_pm_nl_set_flags() where it
is called under the pernet->lock and not rcu_read_lock(), an extra
condition is then passed to help the diagnostic checks making sure
either the associated spin lock or the RCU lock is held.
Geliang Tang [Tue, 12 Nov 2024 19:18:33 +0000 (20:18 +0100)]
mptcp: update local address flags when setting it
Just like in-kernel pm, when userspace pm does set_flags, it needs to send
out MP_PRIO signal, and also modify the flags of the corresponding address
entry in the local address list. This patch implements the missing logic.
Traverse all address entries on userspace_pm_local_addr_list to find the
local address entry, if bkup is true, set the flags of this entry with
FLAG_BACKUP, otherwise, clear FLAG_BACKUP.
Dave Airlie [Tue, 12 Nov 2024 19:57:03 +0000 (05:57 +1000)]
nouveau: fw: sync dma after setup is called.
When this code moved to non-coherent allocator the sync was put too
early for some firmwares which called the setup function, move the
sync down after the setup function.
Linus Torvalds [Wed, 13 Nov 2024 21:32:51 +0000 (13:32 -0800)]
Merge tag 'pm-6.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a locking issue in the asymmetric CPU capacity setup code in the
intel_pstate driver that may lead to a deadlock if CPU online/offline
runs in parallel with the code in question, which is unlikely but not
impossible (Rafael Wysocki)"
* tag 'pm-6.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Rearrange locking in hybrid_init_cpu_capacity_scaling()
Linus Torvalds [Wed, 13 Nov 2024 21:28:58 +0000 (13:28 -0800)]
Merge tag 'tpmdd-next-6.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm fixes from Jarkko Sakkinen:
"Two bug fixes for TPM bus encryption (the remaining reported issues in
the feature)"
* tag 'tpmdd-next-6.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: Disable TPM on tpm2_create_primary() failure
tpm: Opt-in in disable PCR integrity protection
Jarkko Sakkinen [Wed, 13 Nov 2024 05:54:12 +0000 (07:54 +0200)]
tpm: Opt-in in disable PCR integrity protection
The initial HMAC session feature added TPM bus encryption and/or integrity
protection to various in-kernel TPM operations. This can cause performance
bottlenecks with IMA, as it heavily utilizes PCR extend operations.
In order to mitigate this performance issue, introduce a kernel
command-line parameter to the TPM driver for disabling the integrity
protection for PCR extend operations (i.e. TPM2_PCR_Extend).
Linus Torvalds [Wed, 13 Nov 2024 17:14:19 +0000 (09:14 -0800)]
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Daniel Borkmann:
- Fix a mismatching RCU unlock flavor in bpf_out_neigh_v6 (Jiawei Ye)
- Fix BPF sockmap with kTLS to reject vsock and unix sockets upon kTLS
context retrieval (Zijian Zhang)
- Fix BPF bits iterator selftest for s390x (Hou Tao)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix mismatched RCU unlock flavour in bpf_out_neigh_v6
bpf: Add sk_is_inet and IS_ICSK check in tls_sw_has_ctx_tx/rx
selftests/bpf: Use -4095 as the bad address for bits iterator
Linus Torvalds [Wed, 13 Nov 2024 17:09:00 +0000 (09:09 -0800)]
Merge tag 'loongarch-fixes-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
- fix possible CPUs setup logical-physical CPU mapping, in order to
avoid CPU hotplug issue
- fix some KASAN bugs
- fix AP booting issue in VM mode
- some trivial cleanups
* tag 'loongarch-fixes-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Fix AP booting issue in VM mode
LoongArch: Add WriteCombine shadow mapping in KASAN
LoongArch: Disable KASAN if PGDIR_SIZE is too large for cpu_vabits
LoongArch: Make KASAN work with 5-level page-tables
LoongArch: Define a default value for VM_DATA_DEFAULT_FLAGS
LoongArch: Fix early_numa_add_cpu() usage for FDT systems
LoongArch: For all possible CPUs setup logical-physical CPU mapping
Linus Torvalds [Wed, 13 Nov 2024 16:58:11 +0000 (08:58 -0800)]
Merge tag 'mm-hotfixes-stable-2024-11-12-16-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"10 hotfixes, 7 of which are cc:stable. 7 are MM, 3 are not. All
singletons"
* tag 'mm-hotfixes-stable-2024-11-12-16-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: swapfile: fix cluster reclaim work crash on rotational devices
selftests: hugetlb_dio: fixup check for initial conditions to skip in the start
mm/thp: fix deferred split queue not partially_mapped: fix
mm/gup: avoid an unnecessary allocation call for FOLL_LONGTERM cases
nommu: pass NULL argument to vma_iter_prealloc()
ocfs2: fix UBSAN warning in ocfs2_verify_volume()
nilfs2: fix null-ptr-deref in block_dirty_buffer tracepoint
nilfs2: fix null-ptr-deref in block_touch_buffer tracepoint
mm: page_alloc: move mlocked flag clearance into free_pages_prepare()
mm: count zeromap read and set for swapout and swapin
Matthew Auld [Tue, 12 Nov 2024 16:28:28 +0000 (16:28 +0000)]
drm/xe: handle flat ccs during hibernation on igpu
Starting from LNL, CCS has moved over to flat CCS model where there is
now dedicated memory reserved for storing compression state. On
platforms like LNL this reserved memory lives inside graphics stolen
memory, which is not treated like normal RAM and is therefore skipped by
the core kernel when creating the hibernation image. Currently if
something was compressed and we enter hibernation all the corresponding
CCS state is lost on such HW, resulting in corrupted memory. To fix this
evict user buffers from TT -> SYSTEM to ensure we take a snapshot of the
raw CCS state when entering hibernation, where upon resuming we can
restore the raw CCS state back when next validating the buffer. This has
been confirmed to fix display corruption on LNL when coming back from
hibernation.
Matthew Auld [Fri, 1 Nov 2024 17:01:57 +0000 (17:01 +0000)]
drm/xe: improve hibernation on igpu
The GGTT looks to be stored inside stolen memory on igpu which is not
treated as normal RAM. The core kernel skips this memory range when
creating the hibernation image, therefore when coming back from
hibernation the GGTT programming is lost. This seems to cause issues
with broken resume where GuC FW fails to load:
Current GGTT users are kernel internal and tracked as pinned, so it
should be possible to hook into the existing save/restore logic that we
use for dgpu, where the actual evict is skipped but on restore we
importantly restore the GGTT programming. This has been confirmed to
fix hibernation on at least ADL and MTL, though likely all igpu
platforms are affected.
This also means we have a hole in our testing, where the existing s4
tests only really test the driver hooks, and don't go as far as actually
rebooting and restoring from the hibernation image and in turn powering
down RAM (and therefore losing the contents of stolen).
v2 (Brost)
- Remove extra newline and drop unnecessary parentheses.
Matthew Brost [Thu, 31 Oct 2024 18:22:57 +0000 (11:22 -0700)]
drm/xe: Restore system memory GGTT mappings
GGTT mappings reside on the device and this state is lost during suspend
/ d3cold thus this state must be restored resume regardless if the BO is
in system memory or VRAM.
v2:
- Unnecessary parentheses around bo->placements[0] (Checkpatch)
Kailang Yang [Tue, 12 Nov 2024 06:03:53 +0000 (14:03 +0800)]
ALSA: hda/realtek - update set GPIO3 to default for Thinkpad with ALC1318
If user no update BIOS, the speaker will no sound.
This patch support old BIOS to have sound from speaker.
Fixes: 1e707769df07 ("ALSA: hda/realtek - Set GPIO3 to default at S4 state for Thinkpad with ALC1318") Signed-off-by: Kailang Yang <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
net: sched: cls_u32: Fix u32's systematic failure to free IDR entries for hnodes.
To generate hnode handles (in gen_new_htid()), u32 uses IDR and
encodes the returned small integer into a structured 32-bit
word. Unfortunately, at disposal time, the needed decoding
is not done. As a result, idr_remove() fails, and the IDR
fills up. Since its size is 2048, the following script ends up
with "Filter already exists":
tc filter add dev myve $FILTER1
tc filter add dev myve $FILTER2
for i in {1..2048}
do
echo $i
tc filter del dev myve $FILTER2
tc filter add dev myve $FILTER2
done
This patch adds the missing decoding logic for handles that
deserve it.
Removing full driver sections also removed mailing list entries, causing
submitters of future patches to forget CCing these mailing lists.
Hence re-add the sections for the Renesas Ethernet AVB, R-Car SATA, and
SuperH Ethernet drivers. Add people who volunteered to maintain these
drivers (thanks a lot!), and mark all of them as supported.
Jakub Kicinski [Wed, 13 Nov 2024 01:30:41 +0000 (17:30 -0800)]
Merge tag 'for-net-2024-11-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- btintel: Direct exception event to bluetooth stack
- hci_core: Fix calling mgmt_device_connected
* tag 'for-net-2024-11-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: btintel: Direct exception event to bluetooth stack
Bluetooth: hci_core: Fix calling mgmt_device_connected
====================
Akash Goel [Mon, 11 Nov 2024 13:47:20 +0000 (13:47 +0000)]
drm/panthor: Fix handling of partial GPU mapping of BOs
This commit fixes the bug in the handling of partial mapping of the
buffer objects to the GPU, which caused kernel warnings.
Panthor didn't correctly handle the case where the partial mapping
spanned multiple scatterlists and the mapping offset didn't point
to the 1st page of starting scatterlist. The offset variable was
not cleared after reaching the starting scatterlist.
Following warning messages were seen.
WARNING: CPU: 1 PID: 650 at drivers/iommu/io-pgtable-arm.c:659 __arm_lpae_unmap+0x254/0x5a0
<snip>
pc : __arm_lpae_unmap+0x254/0x5a0
lr : __arm_lpae_unmap+0x2cc/0x5a0
<snip>
Call trace:
__arm_lpae_unmap+0x254/0x5a0
__arm_lpae_unmap+0x108/0x5a0
__arm_lpae_unmap+0x108/0x5a0
__arm_lpae_unmap+0x108/0x5a0
arm_lpae_unmap_pages+0x80/0xa0
panthor_vm_unmap_pages+0xac/0x1c8 [panthor]
panthor_gpuva_sm_step_unmap+0x4c/0xc8 [panthor]
op_unmap_cb.isra.23.constprop.30+0x54/0x80
__drm_gpuvm_sm_unmap+0x184/0x1c8
drm_gpuvm_sm_unmap+0x40/0x60
panthor_vm_exec_op+0xa8/0x120 [panthor]
panthor_vm_bind_exec_sync_op+0xc4/0xe8 [panthor]
panthor_ioctl_vm_bind+0x10c/0x170 [panthor]
drm_ioctl_kernel+0xbc/0x138
drm_ioctl+0x210/0x4b0
__arm64_sys_ioctl+0xb0/0xf8
invoke_syscall+0x4c/0x110
el0_svc_common.constprop.1+0x98/0xf8
do_el0_svc+0x24/0x38
el0_svc+0x34/0xc8
el0t_64_sync_handler+0xa0/0xc8
el0t_64_sync+0x174/0x178
<snip>
panthor : [drm] drm_WARN_ON(unmapped_sz != pgsize * pgcount)
WARNING: CPU: 1 PID: 650 at drivers/gpu/drm/panthor/panthor_mmu.c:922 panthor_vm_unmap_pages+0x124/0x1c8 [panthor]
<snip>
pc : panthor_vm_unmap_pages+0x124/0x1c8 [panthor]
lr : panthor_vm_unmap_pages+0x124/0x1c8 [panthor]
<snip>
panthor : [drm] *ERROR* failed to unmap range ffffa388f000-ffffa3890000 (requested range ffffa388c000-ffffa3890000)
The syzbot console output indicates a virtual environment where swapfile
is on a rotational device. In this case, clusters aren't actually used,
and si->full_clusters is not initialized. Daan's report is from qemu, so
likely rotational too.
Make sure to only schedule the cluster reclaim work when clusters are
actually in use.
Si-Wei Liu [Mon, 21 Oct 2024 13:40:39 +0000 (16:40 +0300)]
vdpa/mlx5: Fix PA offset with unaligned starting iotlb map
When calculating the physical address range based on the iotlb and mr
[start,end) ranges, the offset of mr->start relative to map->start
is not taken into account. This leads to some incorrect and duplicate
mappings.
For the case when mr->start < map->start the code is already correct:
the range in [mr->start, map->start) was handled by a different
iteration.
Linus Torvalds [Tue, 12 Nov 2024 21:35:13 +0000 (13:35 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"x86 and selftests fixes.
x86:
- When emulating a guest TLB flush for a nested guest, flush vpid01,
not vpid02, if L2 is active but VPID is disabled in vmcs12, i.e. if
L2 and L1 are sharing VPID '0' (from L1's perspective).
- Fix a bug in the SNP initialization flow where KVM would return '0'
to userspace instead of -errno on failure.
- Move the Intel PT virtualization (i.e. outputting host trace to
host buffer and guest trace to guest buffer) behind CONFIG_BROKEN.
- Fix memory leak on failure of KVM_SEV_SNP_LAUNCH_START
- Fix a bug where KVM fails to inject an interrupt from the IRR after
KVM_SET_LAPIC.
Selftests:
- Increase the timeout for the memslot performance selftest to avoid
false failures on arm64 and nested x86 platforms.
- Fix a goof in the guest_memfd selftest where a for-loop initialized
a bit mask to zero instead of BIT(0).
- Disable strict aliasing when building KVM selftests to prevent the
compiler from treating things like "u64 *" to "uint64_t *" cases as
undefined behavior, which can lead to nasty, hard to debug
failures.
- Force -march=x86-64-v2 for KVM x86 selftests if and only if the
uarch is supported by the compiler.
- Fix broken compilation of kvm selftests after a header sync in
tools/"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: VMX: Bury Intel PT virtualization (guest/host mode) behind CONFIG_BROKEN
KVM: x86: Unconditionally set irr_pending when updating APICv state
kvm: svm: Fix gctx page leak on invalid inputs
KVM: selftests: use X86_MEMTYPE_WB instead of VMX_BASIC_MEM_TYPE_WB
KVM: SVM: Propagate error from snp_guest_req_init() to userspace
KVM: nVMX: Treat vpid01 as current if L2 is active, but with VPID disabled
KVM: selftests: Don't force -march=x86-64-v2 if it's unsupported
KVM: selftests: Disable strict aliasing
KVM: selftests: fix unintentional noop test in guest_memfd_test.c
KVM: selftests: memslot_perf_test: increase guest sync timeout
Linus Torvalds [Tue, 12 Nov 2024 21:21:07 +0000 (13:21 -0800)]
Merge tag 'for-6.12/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mikulas Patocka:
- fix warnings about duplicate slab cache names
* tag 'for-6.12/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-cache: fix warnings about duplicate slab caches
dm-bufio: fix warnings about duplicate slab caches
Linus Torvalds [Tue, 12 Nov 2024 21:06:31 +0000 (13:06 -0800)]
Merge tag 'integrity-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity fixes from Mimi Zohar:
"One bug fix, one performance improvement, and the use of
static_assert:
- The bug fix addresses "only a cosmetic change" commit, which didn't
take into account the original 'ima' template definition.
- The performance improvement limits the atomic_read()"
* tag 'integrity-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
integrity: Use static_assert() to check struct sizes
evm: stop avoidably reading i_writecount in evm_file_release
ima: fix buffer overrun in ima_eventdigest_init_common
Linus Torvalds [Tue, 12 Nov 2024 21:01:09 +0000 (13:01 -0800)]
Merge tag 'landlock-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fixes from Mickaël Salaün:
"This fixes issues in the Landlock's sandboxer sample and
documentation, slightly refactors helpers (required for ongoing patch
series), and improve/fix a feature merged in v6.12 (signal and
abstract UNIX socket scoping)"
* tag 'landlock-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Optimize scope enforcement
landlock: Refactor network access mask management
landlock: Refactor filesystem access mask management
samples/landlock: Clarify option parsing behaviour
samples/landlock: Refactor help message
samples/landlock: Fix port parsing in sandboxer
landlock: Fix grammar issues in documentation
landlock: Improve documentation of previous limitations
Sibi Sankar [Wed, 30 Oct 2024 12:55:12 +0000 (18:25 +0530)]
mailbox: qcom-cpucp: Mark the irq with IRQF_NO_SUSPEND flag
The qcom-cpucp mailbox irq is expected to function during suspend-resume
cycle particularly when the scmi cpufreq driver can query the current
frequency using the get_level message after the cpus are brought up during
resume. Hence mark the irq with IRQF_NO_SUSPEND flag to fix the do_xfer
failures we see during resume.
Err Logs:
arm-scmi firmware:scmi: timed out in resp(caller:do_xfer+0x164/0x568)
cpufreq: cpufreq_online: ->get() failed
Sibi Sankar [Wed, 30 Oct 2024 12:55:09 +0000 (18:25 +0530)]
firmware: arm_scmi: Report duplicate opps as firmware bugs
Duplicate opps reported by buggy SCP firmware currently show up
as warnings even though the only functional impact is that the
level/index remain inaccessible. Make it less scary for the end
user by using dev_info instead, along with FW_BUG tag.
Aurelien Jarno [Sun, 10 Nov 2024 11:46:36 +0000 (12:46 +0100)]
Revert "mmc: dw_mmc: Fix IDMAC operation with pages bigger than 4K"
The commit 8396c793ffdf ("mmc: dw_mmc: Fix IDMAC operation with pages
bigger than 4K") increased the max_req_size, even for 4K pages, causing
various issues:
- Panic booting the kernel/rootfs from an SD card on Rockchip RK3566
- Panic booting the kernel/rootfs from an SD card on StarFive JH7100
- "swiotlb buffer is full" and data corruption on StarFive JH7110
At this stage no fix have been found, so it's probably better to just
revert the change.
Donet Tom [Sun, 10 Nov 2024 06:49:03 +0000 (00:49 -0600)]
selftests: hugetlb_dio: fixup check for initial conditions to skip in the start
This test verifies that a hugepage, used as a user buffer for DIO
operations, is correctly freed upon unmapping. To test this, we read the
count of free hugepages before and after the mmap, DIO, and munmap
operations, then check if the free hugepage count is the same.
Reading free hugepages before the test was removed by commit 0268d4579901
('selftests: hugetlb_dio: check for initial conditions to skip at the
start'), causing the test to always fail.
This patch adds back reading the free hugepages before starting the test.
With this patch, the tests are now passing.
Test results without this patch:
./tools/testing/selftests/mm/hugetlb_dio
TAP version 13
1..4
# No. Free pages before allocation : 0
# No. Free pages after munmap : 100
not ok 1 : Huge pages not freed!
# No. Free pages before allocation : 0
# No. Free pages after munmap : 100
not ok 2 : Huge pages not freed!
# No. Free pages before allocation : 0
# No. Free pages after munmap : 100
not ok 3 : Huge pages not freed!
# No. Free pages before allocation : 0
# No. Free pages after munmap : 100
not ok 4 : Huge pages not freed!
# Totals: pass:0 fail:4 xfail:0 xpass:0 skip:0 error:0
Test results with this patch:
/tools/testing/selftests/mm/hugetlb_dio
TAP version 13
1..4
# No. Free pages before allocation : 100
# No. Free pages after munmap : 100
ok 1 : Huge pages freed successfully !
# No. Free pages before allocation : 100
# No. Free pages after munmap : 100
ok 2 : Huge pages freed successfully !
# No. Free pages before allocation : 100
# No. Free pages after munmap : 100
ok 3 : Huge pages freed successfully !
# No. Free pages before allocation : 100
# No. Free pages after munmap : 100
ok 4 : Huge pages freed successfully !
Hugh Dickins [Sun, 10 Nov 2024 21:11:21 +0000 (13:11 -0800)]
mm/thp: fix deferred split queue not partially_mapped: fix
Though even more elusive than before, list_del corruption has still been
seen on THP's deferred split queue.
The idea in commit e66f3185fa04 was right, but its implementation wrong.
The context omitted an important comment just before the critical test:
"split_folio() removes folio from list on success." In ignoring that
comment, when a THP split succeeded, the code went on to release the
preceding safe folio, preserving instead an irrelevant (formerly head)
folio: which gives no safety because it's not on the list. Fix the logic.
John Hubbard [Tue, 5 Nov 2024 03:29:44 +0000 (19:29 -0800)]
mm/gup: avoid an unnecessary allocation call for FOLL_LONGTERM cases
commit 53ba78de064b ("mm/gup: introduce
check_and_migrate_movable_folios()") created a new constraint on the
pin_user_pages*() API family: a potentially large internal allocation must
now occur, for FOLL_LONGTERM cases.
A user-visible consequence has now appeared: user space can no longer pin
more than 2GB of memory anymore on x86_64. That's because, on a 4KB
PAGE_SIZE system, when user space tries to (indirectly, via a device
driver that calls pin_user_pages()) pin 2GB, this requires an allocation
of a folio pointers array of MAX_PAGE_ORDER size, which is the limit for
kmalloc().
In addition to the directly visible effect described above, there is also
the problem of adding an unnecessary allocation. The **pages array
argument has already been allocated, and there is no need for a redundant
**folios array allocation in this case.
Fix this by avoiding the new allocation entirely. This is done by
referring to either the original page[i] within **pages, or to the
associated folio. Thanks to David Hildenbrand for suggesting this
approach and for providing the initial implementation (which I've tested
and adjusted slightly) as well.
Andre Przywara [Thu, 7 Nov 2024 01:42:40 +0000 (01:42 +0000)]
mmc: sunxi-mmc: Fix A100 compatible description
It turns out that the Allwinner A100/A133 SoC only supports 8K DMA
blocks (13 bits wide), for both the SD/SDIO and eMMC instances.
And while this alone would make a trivial fix, the H616 falls back to
the A100 compatible string, so we have to now match the H616 compatible
string explicitly against the description advertising 64K DMA blocks.
As the A100 is now compatible with the D1 description, let the A100
compatible string point to that block instead, and introduce an explicit
match against the H616 string, pointing to the old description.
Also remove the redundant setting of clk_delays to NULL on the way.
Kiran K [Tue, 22 Oct 2024 09:11:34 +0000 (14:41 +0530)]
Bluetooth: btintel: Direct exception event to bluetooth stack
Have exception event part of HCI traces which helps for debug.
snoop traces:
> HCI Event: Vendor (0xff) plen 79
Vendor Prefix (0x8780)
Intel Extended Telemetry (0x03)
Unknown extended telemetry event type (0xde)
01 01 de
Unknown extended subevent 0x07
01 01 de 07 01 de 06 1c ef be ad de ef be ad de
ef be ad de ef be ad de ef be ad de ef be ad de
ef be ad de 05 14 ef be ad de ef be ad de ef be
ad de ef be ad de ef be ad de 43 10 ef be ad de
ef be ad de ef be ad de ef be ad de
Fixes: af395330abed ("Bluetooth: btintel: Add Intel devcoredump support") Signed-off-by: Kiran K <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
Since 61a939c68ee0 ("Bluetooth: Queue incoming ACL data until
BT_CONNECTED state is reached") there is no long the need to call
mgmt_device_connected as ACL data will be queued until BT_CONNECTED
state.
Alexandre Ghiti [Tue, 12 Nov 2024 11:34:22 +0000 (12:34 +0100)]
drivers: perf: Fix wrong put_cpu() placement
Unfortunately, the wrong patch version was merged which places the
put_cpu() after enabling a static key, which is not safe as pointed by
Will [1], so move put_cpu() before to avoid this.
Leon Romanovsky [Tue, 12 Nov 2024 08:56:26 +0000 (10:56 +0200)]
Revert "RDMA/core: Fix ENODEV error for iWARP test over vlan"
The citied commit in Fixes line caused to regression for udaddy [1]
application. It doesn't work over VLANs anymore.
Client:
ifconfig eth2 1.1.1.1
ip link add link eth2 name p0.3597 type vlan protocol 802.1Q id 3597
ip link set dev p0.3597 up
ip addr add 2.2.2.2/16 dev p0.3597
udaddy -S 847 -C 220 -c 2 -t 0 -s 2.2.2.3 -b 2.2.2.2
Server:
ifconfig eth2 1.1.1.3
ip link add link eth2 name p0.3597 type vlan protocol 802.1Q id 3597
ip link set dev p0.3597 up
ip addr add 2.2.2.3/16 dev p0.3597
udaddy -S 847 -C 220 -c 2 -t 0 -b 2.2.2.3
Mark Brown [Tue, 12 Nov 2024 13:09:50 +0000 (13:09 +0000)]
ASoC: max9768: Fix event generation for playback mute
The max9768 has a custom control for playback mute which unconditionally
returns 0 from the put() operation, rather than returning 1 on change to
ensure notifications are generated to userspace. Check to see if the value
has changed and return appropriately.
Michal Luczaj [Thu, 7 Nov 2024 20:46:13 +0000 (21:46 +0100)]
vsock: Fix sk_error_queue memory leak
Kernel queues MSG_ZEROCOPY completion notifications on the error queue.
Where they remain, until explicitly recv()ed. To prevent memory leaks,
clean up the queue when the socket is destroyed.
Michal Luczaj [Thu, 7 Nov 2024 20:46:12 +0000 (21:46 +0100)]
virtio/vsock: Fix accept_queue memory leak
As the final stages of socket destruction may be delayed, it is possible
that virtio_transport_recv_listen() will be called after the accept_queue
has been flushed, but before the SOCK_DONE flag has been set. As a result,
sockets enqueued after the flush would remain unremoved, leading to a
memory leak.
Ville Syrjälä [Thu, 7 Nov 2024 16:11:14 +0000 (18:11 +0200)]
drm/i915: Grab intel_display from the encoder to avoid potential oopsies
Grab the intel_display from 'encoder' rather than 'state'
in the encoder hooks to avoid the massive footgun that is
intel_sanitize_encoder(), which passes NULL as the 'state'
argument to encoder .disable() and .post_disable().
TODO: figure out how to actually fix intel_sanitize_encoder()...
Bibo Mao [Tue, 12 Nov 2024 08:35:39 +0000 (16:35 +0800)]
LoongArch: Fix AP booting issue in VM mode
Native IPI is used for AP booting, because it is the booting interface
between OS and BIOS firmware. The paravirt IPI is only used inside OS,
and native IPI is necessary to boot AP.
When booting AP, we write the kernel entry address in the HW mailbox of
AP and send IPI interrupt to it. AP executes idle instruction and waits
for interrupts or SW events, then clears IPI interrupt and jumps to the
kernel entry from HW mailbox.
Between writing HW mailbox and sending IPI, AP can be woken up by SW
events and jumps to the kernel entry, so ACTION_BOOT_CPU IPI interrupt
will keep pending during AP booting. And native IPI interrupt handler
needs be registered so that it can clear pending native IPI, else there
will be endless interrupts during AP booting stage.
Here native IPI interrupt is initialized even if paravirt IPI is used.
Kanglong Wang [Tue, 12 Nov 2024 08:35:39 +0000 (16:35 +0800)]
LoongArch: Add WriteCombine shadow mapping in KASAN
Currently, the kernel couldn't boot when ARCH_IOREMAP, ARCH_WRITECOMBINE
and KASAN are enabled together. Because DMW2 is used by kernel now which
is configured as 0xa000000000000000 for WriteCombine, but KASAN has no
segment mapping for it. This patch fix this issue.
Solution: Add the relevant definitions for WriteCombine (DMW2) in KASAN.
Huacai Chen [Tue, 12 Nov 2024 08:35:39 +0000 (16:35 +0800)]
LoongArch: Disable KASAN if PGDIR_SIZE is too large for cpu_vabits
If PGDIR_SIZE is too large for cpu_vabits, KASAN_SHADOW_END will
overflow UINTPTR_MAX because KASAN_SHADOW_START/KASAN_SHADOW_END are
aligned up by PGDIR_SIZE. And then the overflowed KASAN_SHADOW_END looks
like a user space address.
For example, PGDIR_SIZE of CONFIG_4KB_4LEVEL is 2^39, which is too large
for Loongson-2K series whose cpu_vabits = 39.
Since CONFIG_4KB_4LEVEL is completely legal for CPUs with cpu_vabits <=
39, we just disable KASAN via early return in kasan_init(). Otherwise we
get a boot failure.
Moreover, we change KASAN_SHADOW_END from the first address after KASAN
shadow area to the last address in KASAN shadow area, in order to avoid
the end address exactly overflow to 0 (which is a legal case). We don't
need to worry about alignment because pgd_addr_end() can handle it.
Huacai Chen [Tue, 12 Nov 2024 08:35:39 +0000 (16:35 +0800)]
LoongArch: Make KASAN work with 5-level page-tables
Make KASAN work with 5-level page-tables, including:
1. Implement and use __pgd_none() and kasan_p4d_offset().
2. As done in kasan_pmd_populate() and kasan_pte_populate(), restrict
the loop conditions of kasan_p4d_populate() and kasan_pud_populate()
to avoid unnecessary population.
Yuli Wang [Tue, 12 Nov 2024 08:35:39 +0000 (16:35 +0800)]
LoongArch: Define a default value for VM_DATA_DEFAULT_FLAGS
This is a trivial cleanup, commit c62da0c35d58518d ("mm/vma: define a
default value for VM_DATA_DEFAULT_FLAGS") has unified default values of
VM_DATA_DEFAULT_FLAGS across different platforms.
Huacai Chen [Tue, 12 Nov 2024 08:35:36 +0000 (16:35 +0800)]
LoongArch: For all possible CPUs setup logical-physical CPU mapping
In order to support ACPI-based physical CPU hotplug, we suppose for all
"possible" CPUs cpu_logical_map() can work. Because some drivers want to
use cpu_logical_map() for all "possible" CPUs, while currently we only
setup logical-physical mapping for "present" CPUs. This lack of mapping
also causes cpu_to_node() cannot work for hot-added CPUs.
All "possible" CPUs are listed in MADT, and the "present" subset is
marked as ACPI_MADT_ENABLED. To setup logical-physical CPU mapping for
all possible CPUs and keep present CPUs continuous in cpu_present_mask,
we parse MADT twice. The first pass handles CPUs with ACPI_MADT_ENABLED
and the second pass handles CPUs without ACPI_MADT_ENABLED.
The global flag (cpu_enumerated) is removed because acpi_map_cpu() calls
cpu_number_map() rather than set_processor_mask() now.
drm/i915/gsc: ARL-H and ARL-U need a newer GSC FW.
All MTL and ARL SKUs share the same GSC FW, but the newer platforms are
only supported in newer blobs. In particular, ARL-S is supported
starting from 102.0.10.1878 (which is already the minimum required
version for ARL in the code), while ARL-H and ARL-U are supported from
102.1.15.1926. Therefore, the driver needs to check which specific ARL
subplatform its running on when verifying that the GSC FW is new enough
for it.
Carolina Jubran [Thu, 7 Nov 2024 18:35:27 +0000 (20:35 +0200)]
net/mlx5e: Disable loopback self-test on multi-PF netdev
In Multi-PF (Socket Direct) configurations, when a loopback packet is
sent through one of the secondary devices, it will always be received
on the primary device. This causes the loopback layer to fail in
identifying the loopback packet as the devices are different.
To avoid false test failures, disable the loopback self-test in
Multi-PF configurations.