Lyude Paul [Fri, 23 Aug 2019 20:52:51 +0000 (16:52 -0400)]
drm/i915: Call dma_set_max_seg_size() in i915_driver_hw_probe()
Currently, we don't call dma_set_max_seg_size() for i915 because we
intentionally do not limit the segment length that the device supports.
However, this results in a warning being emitted if we try to map
anything larger than SZ_64K on a kernel with CONFIG_DMA_API_DEBUG_SG
enabled:
[ 7.751926] DMA-API: i915 0000:00:02.0: mapping sg segment longer
than device claims to support [len=98304] [max=65536]
[ 7.751934] WARNING: CPU: 5 PID: 474 at kernel/dma/debug.c:1220
debug_dma_map_sg+0x20f/0x340
This was originally brought up on
https://bugs.freedesktop.org/show_bug.cgi?id=108517 , and the consensus
there was it wasn't really useful to set a limit (and that dma-debug
isn't really all that useful for i915 in the first place). Unfortunately
though, CONFIG_DMA_API_DEBUG_SG is enabled in the debug configs for
various distro kernels. Since a WARN_ON() will disable automatic problem
reporting (and cause any CI with said option enabled to start
complaining), we really should just fix the problem.
Note that as me and Chris Wilson discussed, the other solution for this
would be to make DMA-API not make such assumptions when a driver hasn't
explicitly set a maximum segment size. But, taking a look at the commit
which originally introduced this behavior, commit 78c47830a5cb
("dma-debug: check scatterlist segments"), there is an explicit mention
of this assumption and how it applies to devices with no segment size:
Conversely, devices which are less limited than the rather
conservative defaults, or indeed have no limitations at all
(e.g. GPUs with their own internal MMU), should be encouraged to
set appropriate dma_parms, as they may get more efficient DMA
mapping performance out of it.
So unless there's any concerns (I'm open to discussion!), let's just
follow suite and call dma_set_max_seg_size() with UINT_MAX as our limit
to silence any warnings.
Changes since v3:
* Drop patch for enabling CONFIG_DMA_API_DEBUG_SG in CI. It looks like
just turning it on causes the kernel to spit out bogus WARN_ONs()
during some igt tests which would otherwise require teaching igt to
disable the various DMA-API debugging options causing this. This is
too much work to be worth it, since DMA-API debugging is useless for
us. So, we'll just settle with this single patch to squelch WARN_ONs()
during driver load for users that have CONFIG_DMA_API_DEBUG_SG turned
on for some reason.
* Move dma_set_max_seg_size() call into i915_driver_hw_probe() - Chris
Wilson
Manasi Navare [Wed, 21 Aug 2019 21:59:50 +0000 (14:59 -0700)]
drm/i915/dp: Fix DSC enable code to use cpu_transcoder instead of encoder->type
This patch fixes the intel_configure_pps_for_dsc_encoder() function to use
cpu_transcoder instead of encoder->type to select the correct DSC registers
that was wrongly used in the original patch for one DSC register isntance.
Four drm_mm_node are used to reserve guest ggtt space, but some of them
may be skipped and not initialised due to space constraints in
intel_vgt_balloon(). If drm_mm_remove_node() is called with
uninitialized drm_mm_node, the above call trace occurs.
This patch check drm_mm_node's validity before calling
drm_mm_remove_node().
Ville Syrjälä [Tue, 20 Aug 2019 16:16:57 +0000 (19:16 +0300)]
drm/i915: Do not create a new max_bpc prop for MST connectors
We're not allowed to create new properties after device registration
so for MST connectors we need to either create the max_bpc property
earlier, or we reuse one we already have. Let's do the latter apporach
since the corresponding SST connector already has the prop and its
min/max are correct also for the MST connector.
The problem was highlighted by commit 4f5368b5541a ("drm/kms:
Catch mode_object lifetime errors") which results in the following
spew:
[ 1330.878941] WARNING: CPU: 2 PID: 1554 at drivers/gpu/drm/drm_mode_object.c:45 __drm_mode_object_add+0xa0/0xb0 [drm]
...
[ 1330.879008] Call Trace:
[ 1330.879023] drm_property_create+0xba/0x180 [drm]
[ 1330.879036] drm_property_create_range+0x15/0x30 [drm]
[ 1330.879048] drm_connector_attach_max_bpc_property+0x62/0x80 [drm]
[ 1330.879086] intel_dp_add_mst_connector+0x11f/0x140 [i915]
[ 1330.879094] drm_dp_add_port.isra.20+0x20b/0x440 [drm_kms_helper]
...
The newly added suspend/resume functions are only used if CONFIG_PM
is enabled:
drivers/mfd/rk808.c:752:12: error: 'rk8xx_resume' defined but not used [-Werror=unused-function]
drivers/mfd/rk808.c:732:12: error: 'rk8xx_suspend' defined but not used [-Werror=unused-function]
Mark them as __maybe_unused so the compiler can silently drop them
when they are not needed.
Fixes: 586c1b4125b3 ("mfd: rk808: Add RK817 and RK809 support") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Lee Jones <[email protected]>
H_PUT_TCE_INDIRECT handlers receive a page with up to 512 TCEs from
a guest. Although we verify correctness of TCEs before we do anything
with the existing tables, there is a small window when a check in
kvmppc_tce_validate might pass and right after that the guest alters
the page of TCEs, causing an early exit from the handler and leaving
srcu_read_lock(&vcpu->kvm->srcu) (virtual mode) or lock_rmap(rmap)
(real mode) locked.
This fixes the bug by jumping to the common exit code with an appropriate
unlock.
Kent Russell [Fri, 23 Aug 2019 13:13:18 +0000 (09:13 -0400)]
drm/powerplay: Fix Vega20 power reading again
For the 40.46 SMU release, they changed CurrSocketPower to
AverageSocketPower, but this was changed back in 40.47 so just check if
it's 40.46 and make the appropriate change
Kent Russell [Thu, 22 Aug 2019 12:17:40 +0000 (08:17 -0400)]
drm/powerplay: Fix Vega20 Average Power value v4
The SMU changed reading from CurrSocketPower to AverageSocketPower, so
reflect this accordingly. This fixes the issue where Average Power
Consumption was being reported as 0 from SMU 40.46-onward
v2: Fixed headline prefix
v3: Add check for SMU version for proper compatibility
v4: Style fix
Naveen N. Rao [Wed, 21 Aug 2019 19:23:58 +0000 (00:53 +0530)]
bpf: handle 32-bit zext during constant blinding
Since BPF constant blinding is performed after the verifier pass, the
ALU32 instructions inserted for doubleword immediate loads don't have a
corresponding zext instruction. This is causing a kernel oops on powerpc
and can be reproduced by running 'test_cgroup_storage' with
bpf_jit_harden=2.
Fix this by emitting BPF_ZEXT during constant blinding if
prog->aux->verifier_zext is set.
Fixes: a4b1d3c1ddf6cb ("bpf: verifier: insert zero extension according to analysis result") Reported-by: Michael Ellerman <[email protected]> Signed-off-by: Naveen N. Rao <[email protected]> Reviewed-by: Jiong Wang <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
Jiong Wang [Sat, 24 Aug 2019 02:00:28 +0000 (19:00 -0700)]
nfp: bpf: fix latency bug when updating stack index register
NFP is using Local Memory to model stack. LM_addr could be used as base of
a 16 32-bit word region of Local Memory. Then, if the stack offset is
beyond the current region, the local index needs to be updated. The update
needs at least three cycles to take effect, therefore the sequence normally
looks like:
local_csr_wr[ActLMAddr3, gprB_5]
nop
nop
nop
If the local index switch happens on a narrow loads, then the instruction
preparing value to zero high 32-bit of the destination register could be
counted as one cycle, the sequence then could be something like:
However, we have zero extension optimization that zeroing high 32-bit could
be eliminated, therefore above IMMED insn won't be available for which case
the first sequence needs to be generated.
Trond Myklebust [Thu, 15 Aug 2019 16:26:05 +0000 (12:26 -0400)]
NFS: Fix spurious EIO read errors
If the client attempts to read a page, but the read fails due to some
spurious error (e.g. an ACCESS error or a timeout, ...) then we need
to allow other processes to retry.
Also try to report errors correctly when doing a synchronous readpage.
Trond Myklebust [Fri, 16 Aug 2019 12:37:26 +0000 (08:37 -0400)]
Revert "NFSv4/flexfiles: Abort I/O early if the layout segment was invalidated"
This reverts commit a79f194aa4879e9baad118c3f8bb2ca24dbef765.
The mechanism for aborting I/O is racy, since we are not guaranteed that
the request is asleep while we're changing both task->tk_status and
task->tk_action.
Trond Myklebust [Fri, 16 Aug 2019 02:55:19 +0000 (22:55 -0400)]
SUNRPC: Handle EADDRINUSE and ENOBUFS correctly
If a connect or bind attempt returns EADDRINUSE, that means we want to
retry with a different port. It is not a fatal connection error.
Similarly, ENOBUFS is not fatal, but just indicates a memory allocation
issue. Retry after a short delay.
Trond Myklebust [Fri, 16 Aug 2019 00:18:48 +0000 (20:18 -0400)]
pNFS/flexfiles: Turn off soft RPC calls
The pNFS/flexfiles I/O requests are sent with the SOFTCONN flag set, so
they automatically time out if the connection breaks. It should
therefore not be necessary to have the soft flag set in addition.
Bandan Das [Mon, 26 Aug 2019 10:15:13 +0000 (06:15 -0400)]
x86/apic: Include the LDR when clearing out APIC registers
Although APIC initialization will typically clear out the LDR before
setting it, the APIC cleanup code should reset the LDR.
This was discovered with a 32-bit KVM guest jumping into a kdump
kernel. The stale bits in the LDR triggered a bug in the KVM APIC
implementation which caused the destination mapping for VCPUs to be
corrupted.
Note that this isn't intended to paper over the KVM APIC bug. The kernel
has to clear the LDR when resetting the APIC registers except when X2APIC
is enabled.
This lacks a Fixes tag because missing to clear LDR goes way back into pre
git history.
[ tglx: Made x2apic_enabled a function call as required ]
Bandan Das [Mon, 26 Aug 2019 10:15:12 +0000 (06:15 -0400)]
x86/apic: Do not initialize LDR and DFR for bigsmp
Legacy apic init uses bigsmp for smp systems with 8 and more CPUs. The
bigsmp APIC implementation uses physical destination mode, but it
nevertheless initializes LDR and DFR. The LDR even ends up incorrectly with
multiple bit being set.
This does not cause a functional problem because LDR and DFR are ignored
when physical destination mode is active, but it triggered a problem on a
32-bit KVM guest which jumps into a kdump kernel.
The multiple bits set unearthed a bug in the KVM APIC implementation. The
code which creates the logical destination map for VCPUs ignores the
disabled state of the APIC and ends up overwriting an existing valid entry
and as a result, APIC calibration hangs in the guest during kdump
initialization.
Remove the bogus LDR/DFR initialization.
This is not intended to work around the KVM APIC bug. The LDR/DFR
ininitalization is wrong on its own.
The issue goes back into the pre git history. The fixes tag is the commit
in the bitkeeper import which introduced bigsmp support in 2003.
ARCv2: IDU-intc: Add support for edge-triggered interrupts
This adds support for an optional extra interrupt cell to specify edge
vs level triggered. It is backward compatible with dts files with only
one cell, and will default to level-triggered in such a case.
Note that I had to make a change to idu_irq_set_affinity as well, as
this function was setting the interrupt type to "level" unconditionally,
since this was the only type supported previously.
Takashi Sakamoto [Mon, 26 Aug 2019 13:55:15 +0000 (22:55 +0900)]
ALSA: oxfw: fix to handle correct stream for PCM playback
When userspace application calls ioctl(2) to configure hardware for PCM
playback substream, ALSA OXFW driver handles incoming AMDTP stream.
In this case, outgoing AMDTP stream should be handled.
This commit fixes the bug for v5.3-rc kernel.
Fixes: 4f380d007052 ("ALSA: oxfw: configure packet format in pcm.hw_params callback") Signed-off-by: Takashi Sakamoto <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
Sebastian Mayr [Sun, 28 Jul 2019 15:26:17 +0000 (17:26 +0200)]
uprobes/x86: Fix detection of 32-bit user mode
32-bit processes running on a 64-bit kernel are not always detected
correctly, causing the process to crash when uretprobes are installed.
The reason for the crash is that in_ia32_syscall() is used to determine the
process's mode, which only works correctly when called from a syscall.
In the case of uretprobes, however, the function is called from a exception
and always returns 'false' on a 64-bit kernel. In consequence this leads to
corruption of the process's return address.
Fix this by using user_64bit_mode() instead of in_ia32_syscall(), which
is correct in any situation.
[ tglx: Add a comment and the following historical info ]
This should have been detected by the rename which happened in commit
abfb9498ee13 ("x86/entry: Rename is_{ia32,x32}_task() to in_{ia32,x32}_syscall()")
which states in the changelog:
The is_ia32_task()/is_x32_task() function names are a big misnomer: they
suggests that the compat-ness of a system call is a task property, which
is not true, the compatness of a system call purely depends on how it
was invoked through the system call layer.
.....
and then it went and blindly renamed every call site.
Sadly enough this was already mentioned here:
8faaed1b9f50 ("uprobes/x86: Introduce sizeof_long(), cleanup adjust_ret_addr() and
arch_uretprobe_hijack_return_addr()")
where the changelog says:
TODO: is_ia32_task() is not what we actually want, TS_COMPAT does
not necessarily mean 32bit. Fortunately syscall-like insns can't be
probed so it actually works, but it would be better to rename and
use is_ia32_frame().
and goes all the way back to:
0326f5a94dde ("uprobes/core: Handle breakpoint and singlestep exceptions")
Oh well. 7+ years until someone actually tried a uretprobe on a 32bit
process on a 64bit kernel....
Thomas Gleixner [Wed, 21 Aug 2019 13:16:31 +0000 (15:16 +0200)]
x86/apic: Fix arch_dynirq_lower_bound() bug for DT enabled machines
Rahul Tanwar reported the following bug on DT systems:
> 'ioapic_dynirq_base' contains the virtual IRQ base number. Presently, it is
> updated to the end of hardware IRQ numbers but this is done only when IOAPIC
> configuration type is IOAPIC_DOMAIN_LEGACY or IOAPIC_DOMAIN_STRICT. There is
> a third type IOAPIC_DOMAIN_DYNAMIC which applies when IOAPIC configuration
> comes from devicetree.
>
> See dtb_add_ioapic() in arch/x86/kernel/devicetree.c
>
> In case of IOAPIC_DOMAIN_DYNAMIC (DT/OF based system), 'ioapic_dynirq_base'
> remains to zero initialized value. This means that for OF based systems,
> virtual IRQ base will get set to zero.
Such systems will very likely not even boot.
For DT enabled machines ioapic_dynirq_base is irrelevant and not
updated, so simply map the IRQ base 1:1 instead.
Prashant Malani [Sat, 24 Aug 2019 08:36:19 +0000 (01:36 -0700)]
r8152: Set memory to all 0xFFs on failed reg reads
get_registers() blindly copies the memory written to by the
usb_control_msg() call even if the underlying urb failed.
This could lead to junk register values being read by the driver, since
some indirect callers of get_registers() ignore the return values. One
example is:
ocp_read_dword() ignores the return value of generic_ocp_read(), which
calls get_registers().
So, emulate PCI "Master Abort" behavior by setting the buffer to all
0xFFs when usb_control_msg() fails.
This patch is copied from the r8152 driver (v2.12.0) published by
Realtek (www.realtek.com).
Yi-Hung Wei [Thu, 22 Aug 2019 20:17:50 +0000 (13:17 -0700)]
openvswitch: Fix conntrack cache with timeout
This patch addresses a conntrack cache issue with timeout policy.
Currently, we do not check if the timeout extension is set properly in the
cached conntrack entry. Thus, after packet recirculate from conntrack
action, the timeout policy is not applied properly. This patch fixes the
aforementioned issue.
Alexey Kodanev [Fri, 23 Aug 2019 17:51:43 +0000 (20:51 +0300)]
ipv4: mpls: fix mpls_xmit for iptunnel
When using mpls over gre/gre6 setup, rt->rt_gw4 address is not set, the
same for rt->rt_gw_family. Therefore, when rt->rt_gw_family is checked
in mpls_xmit(), neigh_xmit() call is skipped. As a result, such setup
doesn't work anymore.
This issue was found with LTP mpls03 tests.
Fixes: 1550c171935d ("ipv4: Prepare rtable for IPv6 gateway") Signed-off-by: Alexey Kodanev <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
fib_dump_info incorrectly has nhs = 0 for blackhole nexthops, so it
believes the nexthop object is a multipath group (nhs != 1) and ends
up down the nexthop_mpath_fill_node() path which is wrong for a
blackhole.
The blackhole check in nexthop_num_path is leftover from early days
of the blackhole implementation which did not initialize the device.
In the end the design was simpler (fewer special case checks) to set
the device to loopback in nh_info, so the check in nexthop_num_path
should have been removed.
Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Reported-by: Donald Sharp <[email protected]> Signed-off-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Linus Torvalds [Sun, 25 Aug 2019 18:29:27 +0000 (11:29 -0700)]
Merge tag 'for-linus-5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBIFS and JFFS2 fixes from Richard Weinberger:
"UBIFS:
- Don't block too long in writeback_inodes_sb()
- Fix for a possible overrun of the log head
- Fix double unlock in orphan_delete()
JFFS2:
- Remove C++ style from UAPI header and unbreak picky toolchains"
* tag 'for-linus-5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubifs: Limit the number of pages in shrink_liability
ubifs: Correctly initialize c->min_log_bytes
ubifs: Fix double unlock around orphan_delete()
jffs2: Remove C++ style comments from uapi header
Linus Torvalds [Sun, 25 Aug 2019 17:10:15 +0000 (10:10 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A few fixes for x86:
- Fix a boot regression caused by the recent bootparam sanitizing
change, which escaped the attention of all people who reviewed that
code.
- Address a boot problem on machines with broken E820 tables caused
by an underflow which ended up placing the trampoline start at
physical address 0.
- Handle machines which do not advertise a legacy timer of any form,
but need calibration of the local APIC timer gracefully by making
the calibration routine independent from the tick interrupt. Marked
for stable as well as there seems to be quite some new laptops
rolled out which expose this.
- Clear the RDRAND CPUID bit on AMD family 15h and 16h CPUs which are
affected by broken firmware which does not initialize RDRAND
correctly after resume. Add a command line parameter to override
this for machine which either do not use suspend/resume or have a
fixed BIOS. Unfortunately there is no way to detect this on boot,
so the only safe decision is to turn it off by default.
- Prevent RFLAGS from being clobbers in CALL_NOSPEC on 32bit which
caused fast KVM instruction emulation to break.
- Explain the Intel CPU model naming convention so that the repeating
discussions come to an end"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/retpoline: Don't clobber RFLAGS during CALL_NOSPEC on i386
x86/boot: Fix boot regression caused by bootparam sanitizing
x86/CPU/AMD: Clear RDRAND CPUID bit on AMD family 15h/16h
x86/boot/compressed/64: Fix boot on machines with broken E820 table
x86/apic: Handle missing global clockevent gracefully
x86/cpu: Explain Intel model naming convention
Linus Torvalds [Sun, 25 Aug 2019 17:08:01 +0000 (10:08 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timekeeping fix from Thomas Gleixner:
"A single fix for a regression caused by the generic VDSO
implementation where a math overflow causes CLOCK_BOOTTIME to become a
random number generator"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping/vsyscall: Prevent math overflow in BOOTTIME update
Linus Torvalds [Sun, 25 Aug 2019 17:06:12 +0000 (10:06 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"Handle the worker management in situations where a task is scheduled
out on a PI lock contention correctly and schedule a new worker if
possible"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Schedule new worker even if PI-blocked
Linus Torvalds [Sun, 25 Aug 2019 17:03:32 +0000 (10:03 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"Two small fixes for kprobes and perf:
- Prevent a deadlock in kprobe_optimizer() causes by reverse lock
ordering
- Fix a comment typo"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kprobes: Fix potential deadlock in kprobe_optimizer()
perf/x86: Fix typo in comment
Linus Torvalds [Sun, 25 Aug 2019 17:00:21 +0000 (10:00 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A single fix for a imbalanced kobject operation in the irq decriptor
code which was unearthed by the new warnings in the kobject code"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Properly pair kobject_del() with kobject_add()
Linus Torvalds [Sun, 25 Aug 2019 16:56:27 +0000 (09:56 -0700)]
Merge branch 'akpm' (patches from Andrew)
Mergr misc fixes from Andrew Morton:
"11 fixes"
Mostly VM fixes, one psi polling fix, and one parisc build fix.
* emailed patches from Andrew Morton <[email protected]>:
mm/kasan: fix false positive invalid-free reports with CONFIG_KASAN_SW_TAGS=y
mm/zsmalloc.c: fix race condition in zs_destroy_pool
mm/zsmalloc.c: migration can leave pages in ZS_EMPTY indefinitely
mm, page_owner: handle THP splits correctly
userfaultfd_release: always remove uffd flags and clear vm_userfaultfd_ctx
psi: get poll_work to run when calling poll syscall next time
mm: memcontrol: flush percpu vmevents before releasing memcg
mm: memcontrol: flush percpu vmstats before releasing memcg
parisc: fix compilation errrors
mm, page_alloc: move_freepages should not examine struct page of reserved memory
mm/z3fold.c: fix race between migration and destruction
Takashi Iwai [Sun, 25 Aug 2019 07:21:44 +0000 (09:21 +0200)]
ALSA: seq: Fix potential concurrent access to the deleted pool
The input pool of a client might be deleted via the resize ioctl, the
the access to it should be covered by the proper locks. Currently the
only missing place is the call in snd_seq_ioctl_get_client_pool(), and
this patch papers over it.
Linus Torvalds [Sun, 25 Aug 2019 03:00:11 +0000 (20:00 -0700)]
Merge tag 'dma-mapping-5.3-5' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
"Two fixes for regressions in this merge window:
- select the Kconfig symbols for the noncoherent dma arch helpers on
arm if swiotlb is selected, not just for LPAE to not break then Xen
build, that uses swiotlb indirectly through swiotlb-xen
- fix the page allocator fallback in dma_alloc_contiguous if the CMA
allocation fails"
* tag 'dma-mapping-5.3-5' of git://git.infradead.org/users/hch/dma-mapping:
dma-direct: fix zone selection after an unaddressable CMA allocation
arm: select the dma-noncoherent symbols for all swiotlb builds
may produce false-positive invalid-free reports on the kernel with
CONFIG_KASAN_SW_TAGS=y.
In the example above we lose the original tag assigned to 'ptr', so
kfree() gets the pointer with 0xFF tag. In kfree() we check that 0xFF
tag is different from the tag in shadow hence print false report.
Instead of just comparing tags, do the following:
1) Check that shadow doesn't contain KASAN_TAG_INVALID. Otherwise it's
double-free and it doesn't matter what tag the pointer have.
2) If pointer tag is different from 0xFF, make sure that tag in the
shadow is the same as in the pointer.
Henry Burns [Sun, 25 Aug 2019 00:55:06 +0000 (17:55 -0700)]
mm/zsmalloc.c: fix race condition in zs_destroy_pool
In zs_destroy_pool() we call flush_work(&pool->free_work). However, we
have no guarantee that migration isn't happening in the background at
that time.
Since migration can't directly free pages, it relies on free_work being
scheduled to free the pages. But there's nothing preventing an
in-progress migrate from queuing the work *after*
zs_unregister_migration() has called flush_work(). Which would mean
pages still pointing at the inode when we free it.
Since we know at destroy time all objects should be free, no new
migrations can come in (since zs_page_isolate() fails for fully-free
zspages). This means it is sufficient to track a "# isolated zspages"
count by class, and have the destroy logic ensure all such pages have
drained before proceeding. Keeping that state under the class spinlock
keeps the logic straightforward.
In this case a memory leak could lead to an eventual crash if compaction
hits the leaked page. This crash would only occur if people are
changing their zswap backend at runtime (which eventually starts
destruction).
Henry Burns [Sun, 25 Aug 2019 00:55:03 +0000 (17:55 -0700)]
mm/zsmalloc.c: migration can leave pages in ZS_EMPTY indefinitely
In zs_page_migrate() we call putback_zspage() after we have finished
migrating all pages in this zspage. However, the return value is
ignored. If a zs_free() races in between zs_page_isolate() and
zs_page_migrate(), freeing the last object in the zspage,
putback_zspage() will leave the page in ZS_EMPTY for potentially an
unbounded amount of time.
To fix this, we need to do the same thing as zs_page_putback() does:
schedule free_work to occur.
To avoid duplicated code, move the sequence to a new
putback_zspage_deferred() function which both zs_page_migrate() and
zs_page_putback() call.
Vlastimil Babka [Sun, 25 Aug 2019 00:54:59 +0000 (17:54 -0700)]
mm, page_owner: handle THP splits correctly
THP splitting path is missing the split_page_owner() call that
split_page() has.
As a result, split THP pages are wrongly reported in the page_owner file
as order-9 pages. Furthermore when the former head page is freed, the
remaining former tail pages are not listed in the page_owner file at
all. This patch fixes that by adding the split_page_owner() call into
__split_huge_page().
Jason Xing [Sun, 25 Aug 2019 00:54:53 +0000 (17:54 -0700)]
psi: get poll_work to run when calling poll syscall next time
Only when calling the poll syscall the first time can user receive
POLLPRI correctly. After that, user always fails to acquire the event
signal.
Reproduce case:
1. Get the monitor code in Documentation/accounting/psi.txt
2. Run it, and wait for the event triggered.
3. Kill and restart the process.
The question is why we can end up with poll_scheduled = 1 but the work
not running (which would reset it to 0). And the answer is because the
scheduling side sees group->poll_kworker under RCU protection and then
schedules it, but here we cancel the work and destroy the worker. The
cancel needs to pair with resetting the poll_scheduled flag.
Roman Gushchin [Sun, 25 Aug 2019 00:54:50 +0000 (17:54 -0700)]
mm: memcontrol: flush percpu vmevents before releasing memcg
Similar to vmstats, percpu caching of local vmevents leads to an
accumulation of errors on non-leaf levels. This happens because some
leftovers may remain in percpu caches, so that they are never propagated
up by the cgroup tree and just disappear into nonexistence with on
releasing of the memory cgroup.
To fix this issue let's accumulate and propagate percpu vmevents values
before releasing the memory cgroup similar to what we're doing with
vmstats.
Since on cpu hotplug we do flush percpu vmstats anyway, we can iterate
only over online cpus.
Roman Gushchin [Sun, 25 Aug 2019 00:54:47 +0000 (17:54 -0700)]
mm: memcontrol: flush percpu vmstats before releasing memcg
Percpu caching of local vmstats with the conditional propagation by the
cgroup tree leads to an accumulation of errors on non-leaf levels.
Let's imagine two nested memory cgroups A and A/B. Say, a process
belonging to A/B allocates 100 pagecache pages on the CPU 0. The percpu
cache will spill 3 times, so that 32*3=96 pages will be accounted to A/B
and A atomic vmstat counters, 4 pages will remain in the percpu cache.
Imagine A/B is nearby memory.max, so that every following allocation
triggers a direct reclaim on the local CPU. Say, each such attempt will
free 16 pages on a new cpu. That means every percpu cache will have -16
pages, except the first one, which will have 4 - 16 = -12. A/B and A
atomic counters will not be touched at all.
Now a user removes A/B. All percpu caches are freed and corresponding
vmstat numbers are forgotten. A has 96 pages more than expected.
As memory cgroups are created and destroyed, errors do accumulate. Even
1-2 pages differences can accumulate into large numbers.
To fix this issue let's accumulate and propagate percpu vmstat values
before releasing the memory cgroup. At this point these numbers are
stable and cannot be changed.
Since on cpu hotplug we do flush percpu vmstats anyway, we can iterate
only over online cpus.
Qian Cai [Sun, 25 Aug 2019 00:54:43 +0000 (17:54 -0700)]
parisc: fix compilation errrors
Commit 0cfaee2af3a0 ("include/asm-generic/5level-fixup.h: fix variable
'p4d' set but not used") converted a few functions from macros to static
inline, which causes parisc to complain,
In file included from include/asm-generic/4level-fixup.h:38:0,
from arch/parisc/include/asm/pgtable.h:5,
from arch/parisc/include/asm/io.h:6,
from include/linux/io.h:13,
from sound/core/memory.c:9:
include/asm-generic/5level-fixup.h:14:18: error: unknown type name 'pgd_t'; did you mean 'pid_t'?
#define p4d_t pgd_t
^
include/asm-generic/5level-fixup.h:24:28: note: in expansion of macro 'p4d_t'
static inline int p4d_none(p4d_t p4d)
^~~~~
It is because "4level-fixup.h" is included before "asm/page.h" where
"pgd_t" is defined.
David Rientjes [Sun, 25 Aug 2019 00:54:40 +0000 (17:54 -0700)]
mm, page_alloc: move_freepages should not examine struct page of reserved memory
After commit 907ec5fca3dc ("mm: zero remaining unavailable struct
pages"), struct page of reserved memory is zeroed. This causes
page->flags to be 0 and fixes issues related to reading
/proc/kpageflags, for example, of reserved memory.
The VM_BUG_ON() in move_freepages_block(), however, assumes that
page_zone() is meaningful even for reserved memory. That assumption is
no longer true after the aforementioned commit.
There's no reason why move_freepages_block() should be testing the
legitimacy of page_zone() for reserved memory; its scope is limited only
to pages on the zone's freelist.
Note that pfn_valid() can be true for reserved memory: there is a
backing struct page. The check for page_to_nid(page) is also buggy but
reserved memory normally only appears on node 0 so the zeroing doesn't
affect this.
Move the debug checks to after verifying PageBuddy is true. This
isolates the scope of the checks to only be for buddy pages which are on
the zone's freelist which move_freepages_block() is operating on. In
this case, an incorrect node or zone is a bug worthy of being warned
about (and the examination of struct page is acceptable bcause this
memory is not reserved).
Why does move_freepages_block() gets called on reserved memory? It's
simply math after finding a valid free page from the per-zone free area
to use as fallback. We find the beginning and end of the pageblock of
the valid page and that can bring us into memory that was reserved per
the e820. pfn_valid() is still true (it's backed by a struct page), but
since it's zero'd we shouldn't make any inferences here about comparing
its node or zone. The current node check just happens to succeed most
of the time by luck because reserved memory typically appears on node 0.
The fix here is to validate that we actually have buddy pages before
testing if there's any type of zone or node strangeness going on.
We noticed it almost immediately after bringing 907ec5fca3dc in on
CONFIG_DEBUG_VM builds. It depends on finding specific free pages in
the per-zone free area where the math in move_freepages() will bring the
start or end pfn into reserved memory and wanting to claim that entire
pageblock as a new migratetype. So the path will be rare, require
CONFIG_DEBUG_VM, and require fallback to a different migratetype.
Some struct pages were already zeroed from reserve pages before 907ec5fca3c so it theoretically could trigger before this commit. I
think it's rare enough under a config option that most people don't run
that others may not have noticed. I wouldn't argue against a stable tag
and the backport should be easy enough, but probably wouldn't single out
a commit that this is fixing.
Mel said:
: The overhead of the debugging check is higher with this patch although
: it'll only affect debug builds and the path is not particularly hot.
: If this was a concern, I think it would be reasonable to simply remove
: the debugging check as the zone boundaries are checked in
: move_freepages_block and we never expect a zone/node to be smaller than
: a pageblock and stuck in the middle of another zone.
Henry Burns [Sun, 25 Aug 2019 00:54:37 +0000 (17:54 -0700)]
mm/z3fold.c: fix race between migration and destruction
In z3fold_destroy_pool() we call destroy_workqueue(&pool->compact_wq).
However, we have no guarantee that migration isn't happening in the
background at that time.
Migration directly calls queue_work_on(pool->compact_wq), if destruction
wins that race we are using a destroyed workqueue.
Zhu Yanjun [Sat, 24 Aug 2019 01:04:16 +0000 (21:04 -0400)]
net: rds: add service level support in rds-info
>From IB specific 7.6.5 SERVICE LEVEL, Service Level (SL)
is used to identify different flows within an IBA subnet.
It is carried in the local route header of the packet.
Before this commit, run "rds-info -I". The outputs are as
below:
"
RDS IB Connections:
LocalAddr RemoteAddr Tos SL LocalDev RemoteDev
192.2.95.3 192.2.95.1 2 0 fe80::21:28:1a:39 fe80::21:28:10:b9
192.2.95.3 192.2.95.1 1 0 fe80::21:28:1a:39 fe80::21:28:10:b9
192.2.95.3 192.2.95.1 0 0 fe80::21:28:1a:39 fe80::21:28:10:b9
"
After this commit, the output is as below:
"
RDS IB Connections:
LocalAddr RemoteAddr Tos SL LocalDev RemoteDev
192.2.95.3 192.2.95.1 2 2 fe80::21:28:1a:39 fe80::21:28:10:b9
192.2.95.3 192.2.95.1 1 1 fe80::21:28:1a:39 fe80::21:28:10:b9
192.2.95.3 192.2.95.1 0 0 fe80::21:28:1a:39 fe80::21:28:10:b9
"
The commit fe3475af3bdf ("net: rds: add per rds connection cache
statistics") adds cache_allocs in struct rds_info_rdma_connection
as below:
struct rds_info_rdma_connection {
...
__u32 rdma_mr_max;
__u32 rdma_mr_size;
__u8 tos;
__u32 cache_allocs;
};
The peer struct in rds-tools of struct rds_info_rdma_connection is as
below:
struct rds_info_rdma_connection {
...
uint32_t rdma_mr_max;
uint32_t rdma_mr_size;
uint8_t tos;
uint8_t sl;
uint32_t cache_allocs;
};
The difference between userspace and kernel is the member variable sl.
In the kernel struct, the member variable sl is missing. This will
introduce risks. So it is necessary to use this commit to avoid this risk.
John Fastabend [Sat, 24 Aug 2019 00:11:38 +0000 (17:11 -0700)]
net: route dump netlink NLM_F_MULTI flag missing
An excerpt from netlink(7) man page,
In multipart messages (multiple nlmsghdr headers with associated payload
in one byte stream) the first and all following headers have the
NLM_F_MULTI flag set, except for the last header which has the type
NLMSG_DONE.
but, after (ee28906) there is a missing NLM_F_MULTI flag in the middle of a
FIB dump. The result is user space applications following above man page
excerpt may get confused and may stop parsing msg believing something went
wrong.
In the golang netlink lib [0] the library logic stops parsing believing the
message is not a multipart message. Found this running Cilium[1] against
net-next while adding a feature to auto-detect routes. I noticed with
multiple route tables we no longer could detect the default routes on net
tree kernels because the library logic was not returning them.
Fix this by handling the fib_dump_info_fnhe() case the same way the
fib_dump_info() handles it by passing the flags argument through the
call chain and adding a flags argument to rt_fill_info().
Tested with Cilium stack and auto-detection of routes works again. Also
annotated libs to dump netlink msgs and inspected NLM_F_MULTI and
NLMSG_DONE flags look correct after this.
Note: In inet_rtm_getroute() pass rt_fill_info() '0' for flags the same
as is done for fib_dump_info() so this looks correct to me.
Fixes: ee28906fd7a14 ("ipv4: Dump route exceptions if requested") Signed-off-by: John Fastabend <[email protected]> Reviewed-by: Stefano Brivio <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Julian Wiedmann [Fri, 23 Aug 2019 09:29:23 +0000 (11:29 +0200)]
s390/qeth: reject oversized SNMP requests
Commit d4c08afafa04 ("s390/qeth: streamline SNMP cmd code") removed
the bounds checking for req_len, under the assumption that the check in
qeth_alloc_cmd() would suffice.
But that code path isn't sufficiently robust to handle a user-provided
data_length, which could overflow (when adding the cmd header overhead)
before being checked against QETH_BUFSIZE. We end up allocating just a
tiny iob, and the subsequent copy_from_user() writes past the end of
that iob.
Special-case this path and add a coarse bounds check, to protect against
maliciuous requests. This let's the subsequent code flow do its normal
job and precise checking, without risk of overflow.
Andrew Lunn [Sat, 24 Aug 2019 22:34:54 +0000 (00:34 +0200)]
MAINTAINERS: Add phylink keyword to SFF/SFP/SFP+ MODULE SUPPORT
Russell king maintains phylink, as part of the SFP module support.
However, much of the review work is about drivers swapping from phylib
to phylink. Such changes don't make changes to the phylink core, and
so the F: rules in MAINTAINERS don't match. Add a K:, keywork rule,
which hopefully get_maintainers will match against for patches to MAC
drivers swapping to phylink.
David S. Miller [Sat, 24 Aug 2019 21:49:36 +0000 (14:49 -0700)]
Merge branch 'collect_md-mode-dev-null'
Hangbin Liu says:
====================
fix dev null pointer dereference when send packets larger than mtu in collect_md mode
When we send a packet larger than PMTU, we need to reply with
icmp_send(ICMP_FRAG_NEEDED) or icmpv6_send(ICMPV6_PKT_TOOBIG).
But with collect_md mode, kernel will crash while accessing the dst dev
as __metadata_dst_init() init dst->dev to NULL by default. Here is what
the code path looks like, for GRE:
We could not fix it in __metadata_dst_init() as there is no dev supplied.
Look in to the __icmp_send()/decode_session{4,6} code we could find the dst
dev is actually not needed. In __icmp_send(), we could get the net by skb->dev.
For decode_session{4,6}, as it was called by xfrm_decode_session_reverse()
in this scenario, the oif is not used by
fl4->flowi4_oif = reverse ? skb->skb_iif : oif;
The reproducer is easy:
ovs-vsctl add-br br0
ip link set br0 up
ovs-vsctl add-port br0 gre0 -- set interface gre0 type=gre options:remote_ip=$dst_addr
ip link set gre0 up
ip addr add ${local_gre6}/64 dev br0
ping6 $remote_gre6 -s 1500
Hangbin Liu [Thu, 22 Aug 2019 14:19:49 +0000 (22:19 +0800)]
xfrm/xfrm_policy: fix dst dev null pointer dereference in collect_md mode
In decode_session{4,6} there is a possibility that the skb dst dev is NULL,
e,g, with tunnel collect_md mode, which will cause kernel crash.
Here is what the code path looks like, for GRE:
The reason is __metadata_dst_init() init dst->dev to NULL by default.
We could not fix it in __metadata_dst_init() as there is no dev supplied.
On the other hand, the skb_dst(skb)->dev is actually not needed as we
called decode_session{4,6} via xfrm_decode_session_reverse(), so oif is not
used by: fl4->flowi4_oif = reverse ? skb->skb_iif : oif;
So make a dst dev check here should be clean and safe.
v4: No changes.
v3: No changes.
v2: fix the issue in decode_session{4,6} instead of updating shared dst dev
in {ip_md, ip6}_tunnel_xmit.
Fixes: 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels") Signed-off-by: Hangbin Liu <[email protected]> Tested-by: Jonathan Lemon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Hangbin Liu [Thu, 22 Aug 2019 14:19:48 +0000 (22:19 +0800)]
ipv4/icmp: fix rt dst dev null pointer dereference
In __icmp_send() there is a possibility that the rt->dst.dev is NULL,
e,g, with tunnel collect_md mode, which will cause kernel crash.
Here is what the code path looks like, for GRE:
- ip6gre_tunnel_xmit
- ip6gre_xmit_ipv4
- __gre6_xmit
- ip6_tnl_xmit
- if skb->len - t->tun_hlen - eth_hlen > mtu; return -EMSGSIZE
- icmp_send
- net = dev_net(rt->dst.dev); <-- here
The reason is __metadata_dst_init() init dst->dev to NULL by default.
We could not fix it in __metadata_dst_init() as there is no dev supplied.
On the other hand, the reason we need rt->dst.dev is to get the net.
So we can just try get it from skb->dev when rt->dst.dev is NULL.
v4: Julian Anastasov remind skb->dev also could be NULL. We'd better
still use dst.dev and do a check to avoid crash.
v3: No changes.
v2: fix the issue in __icmp_send() instead of updating shared dst dev
in {ip_md, ip6}_tunnel_xmit.
Linus Torvalds [Sat, 24 Aug 2019 21:45:33 +0000 (14:45 -0700)]
Merge tag 'gpio-v5.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Here is a (hopefully last) set of GPIO fixes for the v5.3 kernel
cycle. Two are pretty core:
- Fix not reporting open drain/source lines to userspace as "input"
- Fix a minor build error found in randconfigs
- Fix a chip select quirk on the Freescale SPI
- Fix the irqchip initialization semantic order to reflect what it
was using the old API"
* tag 'gpio-v5.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: Fix irqchip initialization order
gpio: of: fix Freescale SPI CS quirk handling
gpio: Fix build error of function redefinition
gpiolib: never report open-drain/source lines as 'input' to user-space
Yi-Hung Wei [Thu, 22 Aug 2019 00:16:10 +0000 (17:16 -0700)]
openvswitch: Fix log message in ovs conntrack
Fixes: 06bd2bdf19d2 ("openvswitch: Add timeout support to ct action") Signed-off-by: Yi-Hung Wei <[email protected]> Signed-off-by: David S. Miller <[email protected]>
David S. Miller [Sat, 24 Aug 2019 20:46:57 +0000 (13:46 -0700)]
Merge branch 'ieee802154-for-davem-2019-08-24' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan
Stefan Schmidt says:
====================
pull-request: ieee802154 for net 2019-08-24
An update from ieee802154 for your *net* tree.
Yue Haibing fixed two bugs discovered by KASAN in the hwsim driver for
ieee802154 and Colin Ian King cleaned up a redundant variable assignment.
====================
Linus Torvalds [Sat, 24 Aug 2019 18:42:06 +0000 (11:42 -0700)]
Merge tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V fixes from Sasha Levin:
- Fix for panics and network failures on PAE guests by Dexuan Cui.
- Fix of a memory leak (and related cleanups) in the hyper-v keyboard
driver by Dexuan Cui.
- Code cleanups for hyper-v clocksource driver during the merge window
by Dexuan Cui.
- Fix for a false positive warning in the userspace hyper-v KVP store
by Vitaly Kuznetsov.
* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: vmbus: Fix virt_to_hvpfn() for X86_PAE
Tools: hv: kvp: eliminate 'may be used uninitialized' warning
Input: hyperv-keyboard: Use in-place iterator API in the channel callback
Drivers: hv: vmbus: Remove the unused "tsc_page" from struct hv_context
We don't actually have any other arm64 fixes pending at the moment
(touch wood), so I've pulled from Marc, written a merge commit, tagged
the result and run it through my build/boot/bisect scripts"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
KVM: arm/arm64: VGIC: Properly initialise private IRQ affinity
KVM: arm/arm64: Only skip MMIO insn once
Linus Torvalds [Sat, 24 Aug 2019 18:26:51 +0000 (11:26 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four fixes, three for edge conditions which don't occur very often.
The lpfc fix mitigates memory exhaustion for some high CPU systems"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: lpfc: Mitigate high memory pre-allocation by SCSI-MQ
scsi: ufs: Fix NULL pointer dereference in ufshcd_config_vreg_hpm()
scsi: target: tcmu: avoid use-after-free after command timeout
scsi: qla2xxx: Fix gnl.l memory leak on adapter init failure
Linus Torvalds [Sat, 24 Aug 2019 18:21:26 +0000 (11:21 -0700)]
Merge tag 'xfs-5.3-fixes-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fix from Darrick Wong:
"A single patch that fixes a xfs lockup problem when a chown/chgrp
operation fails due to running out of quota. It has survived the usual
xfstests runs and merges cleanly with this morning's master:
- Fix a forgotten inode unlock when chown/chgrp fail due to quota"
* tag 'xfs-5.3-fixes-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix missing ILOCK unlock when xfs_setattr_nonsize fails due to EDQUOT
Linus Torvalds [Sat, 24 Aug 2019 18:16:04 +0000 (11:16 -0700)]
Merge tag 'drm-fixes-2019-08-24' of git://anongit.freedesktop.org/drm/drm
Pull more drm fixes from Dave Airlie:
"Although the tree built for me fine on arm here, it appears either
header cleanups in next or some kconfig combo it breaks, so this
contains a fix to mediatek to include dma-mapping.h explicitly.
There was also one nouveau fix that came in late that I was going to
leave until next week, but since I was sending this I thought it may
as well be in here:
mediatek:
- fix build in some cases
nouveau:
- fix hang with i2c and mst docks"
* tag 'drm-fixes-2019-08-24' of git://anongit.freedesktop.org/drm/drm:
drm/mediatek: include dma-mapping header
drm/nouveau: Don't retry infinitely when receiving no data on i2c over AUX
"One (hopefully last) set of fixes for KVM/arm for 5.3: an embarassing
MMIO emulation regression, and a UBSAN splat. Oh well...
- Don't overskip instructions on MMIO emulation
- Fix UBSAN splat when initializing PPI priorities"
* tag 'kvmarm-fixes-for-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm:
KVM: arm/arm64: VGIC: Properly initialise private IRQ affinity
KVM: arm/arm64: Only skip MMIO insn once
Dave Airlie [Sat, 24 Aug 2019 05:07:07 +0000 (15:07 +1000)]
drm/mediatek: include dma-mapping header
Although it builds fine here in my arm cross compile, it seems
either via some other patches in -next or some Kconfig combination,
this fails to build for everyone.
This is because on big-endian machines casts from __u32 to __u16 are
generated by referencing the respective variable as __u16 with an offset
of 2 (as opposed to 0 on little-endian machines).
The verifier already has all the infrastructure in place to allow such
accesses, it's just that they are not explicitly enabled for
eth_protocol field. Enable them for eth_protocol field by using
bpf_ctx_range instead of offsetof.
Ditto for ip_protocol, bind_inany and len, since they already allow
narrowing, and the same problem can arise when working with them.
Daniel Borkmann [Fri, 23 Aug 2019 20:14:23 +0000 (22:14 +0200)]
bpf: fix use after free in prog symbol exposure
syzkaller managed to trigger the warning in bpf_jit_free() which checks via
bpf_prog_kallsyms_verify_off() for potentially unlinked JITed BPF progs
in kallsyms, and subsequently trips over GPF when walking kallsyms entries:
Upon further debugging, it turns out that whenever we trigger this
issue, the kallsyms removal in bpf_prog_ksym_node_del() was /skipped/
but yet bpf_jit_free() reported that the entry is /in use/.
Problem is that symbol exposure via bpf_prog_kallsyms_add() but also
perf_event_bpf_event() were done /after/ bpf_prog_new_fd(). Once the
fd is exposed to the public, a parallel close request came in right
before we attempted to do the bpf_prog_kallsyms_add().
Given at this time the prog reference count is one, we start to rip
everything underneath us via bpf_prog_release() -> bpf_prog_put().
The memory is eventually released via deferred free, so we're seeing
that bpf_jit_free() has a kallsym entry because we added it from
bpf_prog_load() but /after/ bpf_prog_put() from the remote CPU.
Therefore, move both notifications /before/ we install the fd. The
issue was never seen between bpf_prog_alloc_id() and bpf_prog_new_fd()
because upon bpf_prog_get_fd_by_id() we'll take another reference to
the BPF prog, so we're still holding the original reference from the
bpf_prog_load().
Fixes: 6ee52e2a3fe4 ("perf, bpf: Introduce PERF_RECORD_BPF_EVENT") Fixes: 74451e66d516 ("bpf: make jited programs visible in traces") Reported-by: [email protected] Signed-off-by: Daniel Borkmann <[email protected]> Cc: Song Liu <[email protected]>
bpf: fix precision tracking in presence of bpf2bpf calls
While adding extra tests for precision tracking and extra infra
to adjust verifier heuristics the existing test
"calls: cross frame pruning - liveness propagation" started to fail.
The root cause is the same as described in verifer.c comment:
* Also if parent's curframe > frame where backtracking started,
* the verifier need to mark registers in both frames, otherwise callees
* may incorrectly prune callers. This is similar to
* commit 7640ead93924 ("bpf: verifier: make sure callees don't prune with caller differences")
* For now backtracking falls back into conservative marking.
Turned out though that returning -ENOTSUPP from backtrack_insn() and
doing mark_all_scalars_precise() in the current parentage chain is not enough.
Depending on how is_state_visited() heuristic is creating parentage chain
it's possible that callee will incorrectly prune caller.
Fix the issue by setting precise=true earlier and more aggressively.
Before this fix the precision tracking _within_ functions that don't do
bpf2bpf calls would still work. Whereas now precision tracking is completely
disabled when bpf2bpf calls are present anywhere in the program.
No difference in cilium tests (they don't have bpf2bpf calls).
No difference in test_progs though some of them have bpf2bpf calls,
but precision tracking wasn't effective there.
Jakub Sitnicki [Wed, 21 Aug 2019 12:17:20 +0000 (14:17 +0200)]
flow_dissector: Fix potential use-after-free on BPF_PROG_DETACH
Call to bpf_prog_put(), with help of call_rcu(), queues an RCU-callback to
free the program once a grace period has elapsed. The callback can run
together with new RCU readers that started after the last grace period.
New RCU readers can potentially see the "old" to-be-freed or already-freed
pointer to the program object before the RCU update-side NULLs it.
Reorder the operations so that the RCU update-side resets the protected
pointer before the end of the grace period after which the program will be
freed.
As reported by Aaro this patch causes network problems on
MIPS Loongson platform. Therefore revert it.
Fixes: f072218cca5b ("r8169: remove not needed call to dma_sync_single_for_device") Signed-off-by: Heiner Kallweit <[email protected]> Reported-by: Aaro Koskinen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Linus Torvalds [Fri, 23 Aug 2019 21:53:09 +0000 (14:53 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Doug Ledford:
"No beating around the bush: this is a monster pull request for an -rc5
kernel. Intel hit me with a series of fixes for TID processing.
Mellanox hit me with a series for their UMR memory support.
And we had one fix for siw that fixes the 32bit build warnings and
because of the number of casts that had to be changed to properly
silence the warnings, that one patch alone is a full 40% of the LOC of
this entire pull request. Given that this is the initial release
kernel for siw, I'm trying to fix anything in it that we can, so that
adds to the impetus to take fixes for it like this one.
I had to do a rebase early in the week. Jason had thought he put a
patch on the rc queue that he needed to be there so he could base some
work off of it, and it had actually not been placed there. So he asked
me (on Tuesday) to fix that up before pushing my wip branch to the
official rc branch. I did, and that's why the early patches look like
they were all committed at the same time on Tuesday. That bunch had
been in my queue prior.
The various patches all pass my test for being legitimate fixes and
not attempts to slide new features or development into a late rc.
Well, they were all fixes with the exception of a couple clean up
patches people wrote for making the fixes they also wrote better (like
a cleanup patch to move UMR checking into a function so that the
remaining UMR fix patches can reference that function), so I left
those in place too.
My apologies for the LOC count and the number of patches here, it's
just how the cards fell this cycle.
Summary:
- Fix siw buffer mapping issue
- Fix siw 32/64 casting issues
- Fix a KASAN access issue in bnxt_re
- Fix several memory leaks (hfi1, mlx4)
- Fix a NULL deref in cma_cleanup
- Fixes for UMR memory support in mlx5 (4 patch series)
- Fix namespace check for restrack
- Fixes for counter support
- Fixes for hfi1 TID processing (5 patch series)
- Fix potential NULL deref in siw
- Fix memory page calculations in mlx5"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (21 commits)
RDMA/siw: Fix 64/32bit pointer inconsistency
RDMA/siw: Fix SGL mapping issues
RDMA/bnxt_re: Fix stack-out-of-bounds in bnxt_qplib_rcfw_send_message
infiniband: hfi1: fix memory leaks
infiniband: hfi1: fix a memory leak bug
IB/mlx4: Fix memory leaks
RDMA/cma: fix null-ptr-deref Read in cma_cleanup
IB/mlx5: Block MR WR if UMR is not possible
IB/mlx5: Fix MR re-registration flow to use UMR properly
IB/mlx5: Report and handle ODP support properly
IB/mlx5: Consolidate use_umr checks into single function
RDMA/restrack: Rewrite PID namespace check to be reliable
RDMA/counters: Properly implement PID checks
IB/core: Fix NULL pointer dereference when bind QP to counter
IB/hfi1: Drop stale TID RDMA packets that cause TIDErr
IB/hfi1: Add additional checks when handling TID RDMA WRITE DATA packet
IB/hfi1: Add additional checks when handling TID RDMA READ RESP packet
IB/hfi1: Unsafe PSN checking for TID RDMA READ Resp packet
IB/hfi1: Drop stale TID RDMA packets
RDMA/siw: Fix potential NULL de-ref
...
Sabrina Dubroca [Fri, 23 Aug 2019 13:44:36 +0000 (15:44 +0200)]
ipv6: propagate ipv6_add_dev's error returns out of ipv6_find_idev
Currently, ipv6_find_idev returns NULL when ipv6_add_dev fails,
ignoring the specific error value. This results in addrconf_add_dev
returning ENOBUFS in all cases, which is unfortunate in cases such as:
# ip link add dummyX type dummy
# ip link set dummyX mtu 1200 up
# ip addr add 2000::/64 dev dummyX
RTNETLINK answers: No buffer space available
Commit a317a2f19da7 ("ipv6: fail early when creating netdev named all
or default") introduced error returns in ipv6_add_dev. Before that,
that function would simply return NULL for all failures.
Linus Torvalds [Fri, 23 Aug 2019 21:45:45 +0000 (14:45 -0700)]
Merge tag 'for-linus-20190823' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Here's a set of fixes that should go into this release. This contains:
- Three minor fixes for NVMe.
- Three minor tweaks for the io_uring polling logic.
- Officially mark Song as the MD maintainer, after he's been filling
that role sucessfully for the last 6 months or so"
* tag 'for-linus-20190823' of git://git.kernel.dk/linux-block:
io_uring: add need_resched() check in inner poll loop
md: update MAINTAINERS info
io_uring: don't enter poll loop if we have CQEs pending
nvme: Add quirk for LiteON CL1 devices running FW 22301111
nvme: Fix cntlid validation when not using NVMEoF
nvme-multipath: fix possible I/O hang when paths are updated
io_uring: fix potential hang with polled IO
Linus Torvalds [Fri, 23 Aug 2019 17:53:34 +0000 (10:53 -0700)]
Merge tag 'for-5.3/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Revert a DM bufio change from during the 5.3 merge window now that a
proper fix has been made to the block loopback driver.
- Fix DM kcopyd to wakeup so failed subjobs get completed.
- Various fixes to DM zoned target to address error handling, and other
small tweaks (SPDX license identifiers and fix typos).
- Fix DM integrity range locking race by tracking whether journal has
changed.
- Fix DM dust target to detect reads of badblocks beyond the first 512b
sector (applicable if blocksize is larger than 512b).
- Fix DM persistent-data issue in both the DM btree and DM
space-map-metadata interfaces.
- Fix out of bounds memory access with certain DM table configurations.
* tag 'for-5.3/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm table: fix invalid memory accesses with too high sector number
dm space map metadata: fix missing store of apply_bops() return value
dm btree: fix order of block initialization in btree_split_beneath
dm raid: add missing cleanup in raid_ctr()
dm zoned: fix potential NULL dereference in dmz_do_reclaim()
dm dust: use dust block size for badblocklist index
dm integrity: fix a crash due to BUG_ON in __journal_read_write()
dm zoned: fix a few typos
dm zoned: add SPDX license identifiers
dm zoned: properly handle backing device failure
dm zoned: improve error handling in i/o map code
dm zoned: improve error handling in reclaim
dm kcopyd: always complete failed jobs
Revert "dm bufio: fix deadlock with loop device"
Linus Torvalds [Fri, 23 Aug 2019 17:49:44 +0000 (10:49 -0700)]
Merge tag 'xfs-5.3-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"Here are a few more bug fixes that trickled in since the last pull.
They've survived the usual xfstests runs and merge cleanly with this
morning's master.
I expect there to be one more pull request tomorrow for the fix to
that quota related inode unlock bug that we were reviewing last night,
but it will continue to soak in the testing machine for several more
hours.
- Fix missing compat ioctl handling for get/setlabel
- Fix missing ioctl pointer sanitization on s390
- Fix a page locking deadlock in the dedupe comparison code
- Fix inadequate locking in reflink code w.r.t. concurrent directio
- Fix broken error detection when breaking layouts"
* tag 'xfs-5.3-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
fs/xfs: Fix return code of xfs_break_leased_layouts()
xfs: fix reflink source file racing with directio writes
vfs: fix page locking deadlocks when deduping files
xfs: compat_ioctl: use compat_ptr()
xfs: fall back to native ioctls for unhandled compat ones
At the moment we initialise the target *mask* of a virtual IRQ to the
VCPU it belongs to, even though this mask is only defined for GICv2 and
quickly runs out of bits for many GICv3 guests.
This behaviour triggers an UBSAN complaint for more than 32 VCPUs:
------
[ 5659.462377] UBSAN: Undefined behaviour in virt/kvm/arm/vgic/vgic-init.c:223:21
[ 5659.471689] shift exponent 32 is too large for 32-bit type 'unsigned int'
------
Also for GICv3 guests the reporting of TARGET in the "vgic-state" debugfs
dump is wrong, due to this very same problem.
Because there is no requirement to create the VGIC device before the
VCPUs (and QEMU actually does it the other way round), we can't safely
initialise mpidr or targets in kvm_vgic_vcpu_init(). But since we touch
every private IRQ for each VCPU anyway later (in vgic_init()), we can
just move the initialisation of those fields into there, where we
definitely know the VGIC type.
On the way make sure we really have either a VGICv2 or a VGICv3 device,
since the existing code is just checking for "VGICv3 or not", silently
ignoring the uninitialised case.
Sven Eckelmann [Thu, 22 Aug 2019 06:55:36 +0000 (08:55 +0200)]
batman-adv: Only read OGM2 tvlv_len after buffer len check
Multiple batadv_ogm2_packet can be stored in an skbuff. The functions
batadv_v_ogm_send_to_if() uses batadv_v_ogm_aggr_packet() to check if there
is another additional batadv_ogm2_packet in the skb or not before they
continue processing the packet.
The length for such an OGM2 is BATADV_OGM2_HLEN +
batadv_ogm2_packet->tvlv_len. The check must first check that at least
BATADV_OGM2_HLEN bytes are available before it accesses tvlv_len (which is
part of the header. Otherwise it might try read outside of the currently
available skbuff to get the content of tvlv_len.
Fixes: 9323158ef9f4 ("batman-adv: OGMv2 - implement originators logic") Signed-off-by: Sven Eckelmann <[email protected]> Signed-off-by: Simon Wunderlich <[email protected]>
Sven Eckelmann [Thu, 22 Aug 2019 06:55:36 +0000 (08:55 +0200)]
batman-adv: Only read OGM tvlv_len after buffer len check
Multiple batadv_ogm_packet can be stored in an skbuff. The functions
batadv_iv_ogm_send_to_if()/batadv_iv_ogm_receive() use
batadv_iv_ogm_aggr_packet() to check if there is another additional
batadv_ogm_packet in the skb or not before they continue processing the
packet.
The length for such an OGM is BATADV_OGM_HLEN +
batadv_ogm_packet->tvlv_len. The check must first check that at least
BATADV_OGM_HLEN bytes are available before it accesses tvlv_len (which is
part of the header. Otherwise it might try read outside of the currently
available skbuff to get the content of tvlv_len.
Linus Torvalds [Fri, 23 Aug 2019 16:19:38 +0000 (09:19 -0700)]
Merge tag 'ceph-for-5.3-rc6' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"Three important fixes tagged for stable (an indefinite hang, a crash
on an assert and a NULL pointer dereference) plus a small series from
Luis fixing instances of vfree() under spinlock"
* tag 'ceph-for-5.3-rc6' of git://github.com/ceph/ceph-client:
libceph: fix PG split vs OSD (re)connect race
ceph: don't try fill file_lock on unsuccessful GETFILELOCK reply
ceph: clear page dirty before invalidate page
ceph: fix buffer free while holding i_ceph_lock in fill_inode()
ceph: fix buffer free while holding i_ceph_lock in __ceph_build_xattrs_blob()
ceph: fix buffer free while holding i_ceph_lock in __ceph_setxattr()
libceph: allow ceph_buffer_put() to receive a NULL ceph_buffer
Linus Torvalds [Fri, 23 Aug 2019 16:03:06 +0000 (09:03 -0700)]
Merge tag 'drm-fixes-2019-08-23' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Live from the laundromat after my washing machine broke down, we have
the 5.3-rc6 fixes. Changelog is in the tag below, but nothing too
noteworthy in here:
rcar-du:
- LVDS dual-link mode fix
mediatek:
- of node refcount fix
- prime buffer import fix
- dma max seg fix
* tag 'drm-fixes-2019-08-23' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu/powerplay: silence a warning in smu_v11_0_setup_pptable
drm/amd/display: Calculate bpc based on max_requested_bpc
drm/amdgpu: prevent memory leaks in AMDGPU_CS ioctl
drm/amd/amdgpu: disable MMHUB PG for navi10
drm/amd/powerplay: remove duplicate macro smu_get_uclk_dpm_states in amdgpu_smu.h
drm/amd/powerplay: fix variable type errors in smu_v11_0_setup_pptable
drm/amdgpu/gfx9: update pg_flags after determining if gfx off is possible
drm/i915: Fix HW readout for crtc_clock in HDMI mode
drm/mediatek: mtk_drm_drv.c: Add of_node_put() before goto
drm: rcar_lvds: Fix dual link mode operations
drm/mediatek: set DMA max segment size
drm/mediatek: use correct device to import PRIME buffers
drm/omap: ensure we have a valid dma_mask
drm/komeda: Add support for 'memory-region' DT node property
drm/komeda: Adds internal bpp computing for arm afbc only format YU08 YU10
drm/komeda: Initialize and enable output polling on Komeda
x86/retpoline: Don't clobber RFLAGS during CALL_NOSPEC on i386
Use 'lea' instead of 'add' when adjusting %rsp in CALL_NOSPEC so as to
avoid clobbering flags.
KVM's emulator makes indirect calls into a jump table of sorts, where
the destination of the CALL_NOSPEC is a small blob of code that performs
fast emulation by executing the target instruction with fixed operands.
adcb_al_dl:
0x000339f8 <+0>: adc %dl,%al
0x000339fa <+2>: ret
A major motiviation for doing fast emulation is to leverage the CPU to
handle consumption and manipulation of arithmetic flags, i.e. RFLAGS is
both an input and output to the target of CALL_NOSPEC. Clobbering flags
results in all sorts of incorrect emulation, e.g. Jcc instructions often
take the wrong path. Sans the nops...
ctxt->eflags = (ctxt->eflags & ~EFLAGS_MASK) | (flags & EFLAGS_MASK);
0x000359a8 <+136>: mov -0x10(%ebp),%eax
0x000359ab <+139>: and $0x8d5,%edi
0x000359b4 <+148>: and $0xfffff72a,%eax
0x000359b9 <+153>: or %eax,%edi
0x000359bd <+157>: mov %edi,0x4(%ebx)
For the most part this has gone unnoticed as emulation of guest code
that can trigger fast emulation is effectively limited to MMIO when
running on modern hardware, and MMIO is rarely, if ever, accessed by
instructions that affect or consume flags.
Breakage is almost instantaneous when running with unrestricted guest
disabled, in which case KVM must emulate all instructions when the guest
has invalid state, e.g. when the guest is in Big Real Mode during early
BIOS.
Mikulas Patocka [Fri, 23 Aug 2019 13:54:09 +0000 (09:54 -0400)]
dm table: fix invalid memory accesses with too high sector number
If the sector number is too high, dm_table_find_target() should return a
pointer to a zeroed dm_target structure (the caller should test it with
dm_target_is_valid).
However, for some table sizes, the code in dm_table_find_target() that
performs btree lookup will access out of bound memory structures.
Fix this bug by testing the sector number at the beginning of
dm_table_find_target(). Also, add an "inline" keyword to the function
dm_table_get_size() because this is a hot path.
drm/komeda: Clean warning 'komeda_component_add' might be a candidate for 'gnu_printf'
komeda/komeda_pipeline.c: In function 'komeda_component_add':
komeda/komeda_pipeline.c:212:3: warning: function 'komeda_component_add' might be a candidate for 'gnu_printf' format attribute [-Wsuggest-attribute=format]
vsnprintf(c->name, sizeof(c->name), name_fmt, args);
^~~~~~~~~
/arm/linux/display/aosp-4.14-drm-next/drivers/gpu/drm/arm/display/komeda/komeda_kms.c: In function ‘komeda_crtc_normalize_zpos’:
/arm/linux/display/aosp-4.14-drm-next/drivers/gpu/drm/arm/display/komeda/komeda_kms.c:150:26: warning: variable ‘fb’ set but not used [-Wunused-but-set-variable]
struct drm_framebuffer *fb;
^~
/arm/linux/display/aosp-4.14-drm-next/drivers/gpu/drm/arm/display/komeda/komeda_kms.c: In function ‘komeda_kms_check’:
/arm/linux/display/aosp-4.14-drm-next/drivers/gpu/drm/arm/display/komeda/komeda_kms.c:209:25: warning: variable ‘old_crtc_st’ set but not used [-Wunused-but-set-variable]
struct drm_crtc_state *old_crtc_st, *new_crtc_st;
^~~~~~~~~~~
projects / linux.git / log