Jakub Kicinski [Thu, 15 Feb 2024 16:03:49 +0000 (08:03 -0800)]
Merge branch 'fix-module_description-for-net-p6'
Breno Leitao says:
====================
Fix MODULE_DESCRIPTION() for net (p6)
There are a few network modules left that misses MODULE_DESCRIPTION(),
causing a warnning when compiling with W=1. Example:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/arcnet/....
This last patchset solves the problem for all the missing driver. It is
not expect to see any warning for the driver/net and net/ directory once
all these patches have landed.
Takashi Iwai [Thu, 15 Feb 2024 15:31:44 +0000 (16:31 +0100)]
ALSA: usb-audio: More relaxed check of MIDI jack names
The USB audio driver tries to retrieve MIDI jack name strings that can
be used for rawmidi substream names and sequencer port names, but its
checking is too strict: often the firmware provides the jack info for
unexpected directions, and then we miss the info although it's
present.
In this patch, the code to extract the jack info is changed to allow
both in and out directions in a single loop. That is, the former two
functions to obtain the descriptor pointers for jack in and out are
changed to a single function that returns iJack of the corresponding
jack ID, no matter which direction is used. It's a code
simplification at the same time as well as the fix.
Gavrilov Ilia [Wed, 14 Feb 2024 09:01:50 +0000 (09:01 +0000)]
pppoe: Fix memory leak in pppoe_sendmsg()
syzbot reports a memory leak in pppoe_sendmsg [1].
The problem is in the pppoe_recvmsg() function that handles errors
in the wrong order. For the skb_recv_datagram() function, check
the pointer to skb for NULL first, and then check the 'error' variable,
because the skb_recv_datagram() function can set 'error'
to -EAGAIN in a loop but return a correct pointer to socket buffer
after a number of attempts, though 'error' remains set to -EAGAIN.
skb_recv_datagram
__skb_recv_datagram // Loop. if (err == -EAGAIN) then
// go to the next loop iteration
__skb_try_recv_datagram // if (skb != NULL) then return 'skb'
// else if a signal is received then
// return -EAGAIN
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with Syzkaller.
Dmitry Antipov [Wed, 14 Feb 2024 08:22:24 +0000 (11:22 +0300)]
net: sctp: fix skb leak in sctp_inq_free()
In case of GSO, 'chunk->skb' pointer may point to an entry from
fraglist created in 'sctp_packet_gso_append()'. To avoid freeing
random fraglist entry (and so undefined behavior and/or memory
leak), introduce 'sctp_inq_chunk_free()' helper to ensure that
'chunk->skb' is set to 'chunk->head_skb' (i.e. fraglist head)
before calling 'sctp_chunk_free()', and use the aforementioned
helper in 'sctp_inq_pop()' as well.
Takashi Iwai [Thu, 15 Feb 2024 14:00:31 +0000 (15:00 +0100)]
Merge tag 'asoc-fix-v6.8-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.8
A relatively large set of fixes and quirk additions here but they're all
driver specific, people seem to be back into the swing of things after
the holidays. This is all driver specific and much of it fairly minor.
Arnd Bergmann [Thu, 15 Feb 2024 08:32:08 +0000 (09:32 +0100)]
kallsyms: ignore ARMv4 thunks along with others
lld is now able to build ARMv4 and ARMv4T kernels, which means it can
generate thunks for those (__ARMv4PILongThunk_*, __ARMv4PILongBXThunk_*)
that can interfere with kallsyms table generation since they do not get
ignore like the corresponding ARMv5+ ones are:
Inconsistent kallsyms data
Try "make KALLSYMS_EXTRA_PASS=1" as a workaround
Replace the hardcoded list of thunk symbols with a more general regex that
covers this one along with future symbols that follow the same pattern.
Florian Fainelli [Tue, 13 Feb 2024 17:33:39 +0000 (09:33 -0800)]
net: bcmasp: Handle RX buffer allocation failure
The buffer_pg variable needs to hold an order-5 allocation (32 x
PAGE_SIZE) which, under memory pressure may fail to be allocated. Deal
with that error condition properly to avoid doing a NULL pointer
de-reference in the subsequent call to dma_map_page().
In addition, the err_reclaim_tx error label in bcmasp_netif_init() needs
to ensure that the TX NAPI object is properly deleted, otherwise
unregister_netdev() will spin forever attempting to test and clear
the NAPI_STATE_HASHED bit.
Mark Brown [Tue, 13 Feb 2024 18:24:38 +0000 (18:24 +0000)]
arm64/sve: Lower the maximum allocation for the SVE ptrace regset
Doug Anderson observed that ChromeOS crashes are being reported which
include failing allocations of order 7 during core dumps due to ptrace
allocating storage for regsets:
which is the maximum size of the SVE regset. As Doug observes it is not
entirely surprising that such a large allocation of contiguous memory might
fail on a long running system.
The SVE regset is currently sized to hold SVE registers with a VQ of
SVE_VQ_MAX which is 512, substantially more than the architectural maximum
of 16 which we might see even in a system emulating the limits of the
architecture. Since we don't expose the size we tell the regset core
externally let's define ARCH_SVE_VQ_MAX with the actual architectural
maximum and use that for the regset, we'll still overallocate most of the
time but much less so which will be helpful even if the core is fixed to
not require contiguous allocations.
Specify ARCH_SVE_VQ_MAX in terms of the maximum value that can be written
into ZCR_ELx.LEN (where this is set in the hardware). For consistency
update the maximum SME vector length to be specified in the same style
while we are at it.
We could also teach the ptrace core about runtime discoverable regset sizes
but that would be a more invasive change and this is being observed in
practical systems.
Easwar Hariharan [Wed, 14 Feb 2024 17:55:18 +0000 (17:55 +0000)]
arm64: Subscribe Microsoft Azure Cobalt 100 to ARM Neoverse N2 errata
Add the MIDR value of Microsoft Azure Cobalt 100, which is a Microsoft
implemented CPU based on r0p0 of the ARM Neoverse N2 CPU, and therefore
suffers from all the same errata.
Paolo Abeni [Thu, 15 Feb 2024 11:31:22 +0000 (12:31 +0100)]
Merge tag 'linux-can-fixes-for-6.8-20240214' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2024-02-14
this is a pull request of 3 patches for net/master.
the first patch is by Ziqi Zhao and targets the CAN J1939 protocol, it
fixes a potential deadlock by replacing the spinlock by an rwlock.
Oleksij Rempel's patch adds a missing spin_lock_bh() to prevent a
potential Use-After-Free in the CAN J1939's
setsockopt(SO_J1939_FILTER).
Maxime Jayat contributes a patch to fix the transceiver delay
compensation (TDCO) calculation, which is needed for higher CAN-FD bit
rates (usually 2Mbit/s).
* tag 'linux-can-fixes-for-6.8-20240214' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: netlink: Fix TDCO calculation using the old data bittiming
can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER)
can: j1939: prevent deadlock by changing j1939_socks_lock to rwlock
====================
Vadim Fedorenko [Tue, 13 Feb 2024 11:04:28 +0000 (03:04 -0800)]
net-timestamp: make sk_tskey more predictable in error path
When SOF_TIMESTAMPING_OPT_ID is used to ambiguate timestamped datagrams,
the sk_tskey can become unpredictable in case of any error happened
during sendmsg(). Move increment later in the code and make decrement of
sk_tskey in error path. This solution is still racy in case of multiple
threads doing snedmsg() over the very same socket in parallel, but still
makes error path much more predictable.
drm/xe/pt: Allow for stricter type- and range checking
Distinguish between xe_pt and the xe_pt_dir subclass when
allocating and freeing. Also use a fixed-size array for the
xe_pt_dir page entries to make life easier for dynamic range-
checkers. Finally rename the page-directory child pointer array
to "children".
While no functional change, this fixes ubsan splats similar to:
shmem ensures the memory is cleared on allocation, however here we are
using TTM, which doesn't natively support shmem (other than for swap),
but instead just allocates normal system memory. And we only zero such
memory for userspace allocations. In the case of intel_fbdev we are
missing the memset_io() since display path incorrectly thinks object is
shmem based.
The function xe_vm_prepare_vma was blindly accepting zero as the
number of fences and forwarded that to drm_exec_prepare_obj.
However, that leads to an out-of-bounds shift in the
dma_resv_reserve_fences() and while one could argue that the
dma_resv code should be robust against that, avoid attempting
to reserve zero fences.
Relevant stack trace:
[773.183188] ------------[ cut here ]------------
[773.183199] UBSAN: shift-out-of-bounds in ../include/linux/log2.h:57:13
[773.183241] shift exponent 64 is too large for 64-bit type 'long unsigned int'
[773.183254] CPU: 2 PID: 1816 Comm: xe_evict Tainted: G U 6.8.0-rc3-xe #1
[773.183256] Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 2014 10/14/2022
[773.183257] Call Trace:
[773.183258] <TASK>
[773.183260] dump_stack_lvl+0xaf/0xd0
[773.183266] dump_stack+0x10/0x20
[773.183283] ubsan_epilogue+0x9/0x40
[773.183286] __ubsan_handle_shift_out_of_bounds+0x10f/0x170
[773.183293] dma_resv_reserve_fences.cold+0x2b/0x48
[773.183295] ? ww_mutex_lock+0x3c/0x110
[773.183301] drm_exec_prepare_obj+0x45/0x60 [drm_exec]
[773.183313] xe_vm_prepare_vma+0x33/0x70 [xe]
[773.183375] xe_vma_destroy_unlocked+0x55/0xa0 [xe]
[773.183427] xe_vm_close_and_put+0x526/0x940 [xe]
Jakub Kicinski [Tue, 13 Feb 2024 14:20:55 +0000 (06:20 -0800)]
selftests: tls: increase the wait in poll_partial_rec_async
Test runners on debug kernels occasionally fail with:
# # RUN tls_err.13_aes_gcm.poll_partial_rec_async ...
# # tls.c:1883:poll_partial_rec_async:Expected poll(&pfd, 1, 5) (0) == 1 (1)
# # tls.c:1870:poll_partial_rec_async:Expected status (256) == 0 (0)
# # poll_partial_rec_async: Test failed at step #17
# # FAIL tls_err.13_aes_gcm.poll_partial_rec_async
# not ok 699 tls_err.13_aes_gcm.poll_partial_rec_async
# # FAILED: 698 / 699 tests passed.
This points to the second poll() in the test which is expected
to wait for the sender to send the rest of the data.
Apparently under some conditions that doesn't happen within 5ms,
bump the timeout to 20ms.
Dave Ertman [Tue, 13 Feb 2024 18:39:55 +0000 (10:39 -0800)]
ice: Add check for lport extraction to LAG init
To fully support initializing the LAG support code, a DDP package that
extracts the logical port from the metadata is required. If such a
package is not present, there could be difficulties in supporting some
bond types.
Add a check into the initialization flow that will bypass the new paths
if any of the support pieces are missing.
Jakub Kicinski [Thu, 15 Feb 2024 01:32:37 +0000 (17:32 -0800)]
Merge tag 'wireless-2024-02-14' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Valentine's day edition, with just few fixes because
that's how we love it ;-)
iwlwifi:
- correct A3 in A-MSDUs
- fix crash when operating as AP and running out of station
slots to use
- clear link ID to correct some later checks against it
- fix error codes in SAR table loading
- fix error path in PPAG table read
mac80211:
- reload a pointer after SKB may have changed
(only in certain monitor inject mode scenarios)
* tag 'wireless-2024-02-14' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: mvm: fix a crash when we run out of stations
wifi: iwlwifi: uninitialized variable in iwl_acpi_get_ppag_table()
wifi: iwlwifi: Fix some error codes
wifi: iwlwifi: clear link_id in time_event
wifi: iwlwifi: mvm: use correct address 3 in A-MSDU
wifi: mac80211: reload info pointer in ieee80211_tx_dequeue()
====================
If we hit CQ ring overflow when attempting to post a multishot accept
completion, we don't properly save the result or return code. This
results in losing the accepted fd value.
Instead, we return the result from the poll operation that triggered
the accept retry. This is generally POLLIN|POLLPRI|POLLRDNORM|POLLRDBAND
which is 0xc3, or 195, which looks like a valid file descriptor, but it
really has no connection to that.
Handle this like we do for other multishot completions - assign the
result, and return IOU_STOP_MULTISHOT to cancel any further completions
from this request when overflow is hit. This preserves the result, as we
should, and tells the application that the request needs to be re-armed.
Linus Torvalds [Thu, 15 Feb 2024 00:06:31 +0000 (16:06 -0800)]
Merge tag 'mips-fixes_6.8_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- Fix for broken ipv6 checksums
- Fix handling of exceptions in delay slots
* tag 'mips-fixes_6.8_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
mm/memory: Use exception ip to search exception tables
MIPS: Clear Cause.BD in instruction_pointer_set
ptrace: Introduce exception_ip arch hook
MIPS: Add 'memory' clobber to csum_ipv6_magic() inline assembler
Linus Torvalds [Thu, 15 Feb 2024 00:02:36 +0000 (16:02 -0800)]
Merge tag 'landlock-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock test fixes from Mickaël Salaün:
"Fix build issues for tests, and improve test compatibility"
* tag 'landlock-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Fix capability for net_test
selftests/landlock: Fix fs_test build with old libc
selftests/landlock: Fix net_test build with old libc
Linus Torvalds [Wed, 14 Feb 2024 23:47:02 +0000 (15:47 -0800)]
Merge tag 'for-6.8-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few regular fixes and one fix for space reservation regression since
6.7 that users have been reporting:
- fix over-reservation of metadata chunks due to not keeping proper
balance between global block reserve and delayed refs reserve; in
practice this leaves behind empty metadata block groups, the
workaround is to reclaim them by using the '-musage=1' balance
filter
- other space reservation fixes:
- do not delete unused block group if it may be used soon
- do not reserve space for checksums for NOCOW files
- fix extent map assertion failure when writing out free space inode
- reject encoded write if inode has nodatasum flag set
- fix chunk map leak when loading block group zone info"
* tag 'for-6.8-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: don't refill whole delayed refs block reserve when starting transaction
btrfs: zoned: fix chunk map leak when loading block group zone info
btrfs: reject encoded write if inode has nodatasum flag set
btrfs: don't reserve space for checksums when writing to nocow files
btrfs: add new unused block groups to the list of unused block groups
btrfs: do not delete unused block group if it may be used soon
btrfs: add and use helper to check if block group is used
btrfs: don't drop extent_map for free space inode on write error
Linus Torvalds [Wed, 14 Feb 2024 23:34:03 +0000 (15:34 -0800)]
Merge tag 'linux_kselftest-kunit-fixes-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit fix from Shuah Khan:
"One important fix to unregister kunit_bus when KUnit module is
unloaded.
Not doing so causes an error when KUnit module tries to re-register
the bus when it gets reloaded"
* tag 'linux_kselftest-kunit-fixes-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: device: Unregister the kunit_bus on shutdown
Commit 8f84780b84d6 ("netfilter: flowtable: allow unidirectional rules")
made unidirectional flow offload possible, while completely ignoring (and
breaking) bidirectional flow offload for nftables.
Add the missing flag that was left out as an exercise for the reader :)
we seem to be DNATing to some random port on the LAN side. While this is
expected if --random is passed to the iptables command, it is not
expected without passing --random. The expected behavior (and the
observed behavior prior to the commit in the "Fixes" tag) is the traffic
will be DNAT'd to 192.168.0.10:21000 unless there is a tuple collision
with that destination. In that case, we expect the traffic to be
instead DNAT'd to 192.168.0.10:21001, so on so forth until the end of
the range.
This patch intends to restore the behavior observed prior to the "Fixes"
tag.
Fixes: 6ed5943f8735 ("netfilter: nat: remove l4 protocol port rovers") Signed-off-by: Kyle Swenson <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
Radek Krejci [Wed, 14 Feb 2024 09:14:07 +0000 (10:14 +0100)]
modpost: trim leading spaces when processing source files list
get_line() does not trim the leading spaces, but the
parse_source_files() expects to get lines with source files paths where
the first space occurs after the file path.
Fixes: 70f30cfe5b89 ("modpost: use read_text_file() and get_line() for reading text files") Signed-off-by: Radek Krejci <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
kbuild: Fix changing ELF file type for output of gen_btf for big endian
Commit 90ceddcb4950 ("bpf: Support llvm-objcopy for vmlinux BTF")
changed the ELF type of .btf.vmlinux.bin.o to ET_REL via dd, which works
fine for little endian platforms:
While in the area, update the comment to mention that binutils 2.35+
matches LLD's behavior of rejecting an ET_EXEC input, which occurred
after the comment was added.
Jean Delvare [Wed, 14 Feb 2024 14:59:39 +0000 (15:59 +0100)]
i2c: i801: Fix block process call transactions
According to the Intel datasheets, software must reset the block
buffer index twice for block process call transactions: once before
writing the outgoing data to the buffer, and once again before
reading the incoming data from the buffer.
The driver is currently missing the second reset, causing the wrong
portion of the block buffer to be read.
Arnd Bergmann [Mon, 12 Feb 2024 11:19:04 +0000 (12:19 +0100)]
i2c: pasemi: split driver into two separate modules
On powerpc, it is possible to compile test both the new apple (arm) and
old pasemi (powerpc) drivers for the i2c hardware at the same time,
which leads to a warning about linking the same object file twice:
scripts/Makefile.build:244: drivers/i2c/busses/Makefile: i2c-pasemi-core.o is added to multiple modules: i2c-apple i2c-pasemi
Rework the driver to have an explicit helper module, letting Kbuild
take care of whether this should be built-in or a loadable driver.
Fixes: 9bc5f4f660ff ("i2c: pasemi: Split pci driver to its own file") Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Sven Peter <[email protected]> Signed-off-by: Andi Shyti <[email protected]>
Masahiro Yamada [Fri, 2 Feb 2024 01:31:42 +0000 (10:31 +0900)]
kbuild: use 4-space indentation when followed by conditionals
GNU Make manual [1] clearly forbids a tab at the beginning of the
conditional directive line:
"Extra spaces are allowed and ignored at the beginning of the
conditional directive line, but a tab is not allowed."
This will not work for the next release of GNU Make, hence commit 82175d1f9430 ("kbuild: Replace tabs with spaces when followed by
conditionals") replaced the inappropriate tabs with 8 spaces.
However, the 8-space indentation cannot be visually distinguished.
Linus suggested 2-4 spaces for those nested if-statements. [2]
Jann Horn [Wed, 14 Feb 2024 16:05:38 +0000 (17:05 +0100)]
lsm: fix integer overflow in lsm_set_self_attr() syscall
security_setselfattr() has an integer overflow bug that leads to
out-of-bounds access when userspace provides bogus input:
`lctx->ctx_len + sizeof(*lctx)` is checked against `lctx->len` (and,
redundantly, also against `size`), but there are no checks on
`lctx->ctx_len`.
Therefore, userspace can provide an `lsm_ctx` with `->ctx_len` set to a
value between `-sizeof(struct lsm_ctx)` and -1, and this bogus `->ctx_len`
will then be passed to an LSM module as a buffer length, causing LSM
modules to perform out-of-bounds accesses.
The following reproducer will demonstrate this under ASAN (if AppArmor is
loaded as an LSM):
Fixes: a04a1198088a ("LSM: syscalls for current process attributes") Signed-off-by: Jann Horn <[email protected]> Acked-by: Casey Schaufler <[email protected]>
[PM: subj tweak, removed ref to ASAN splat that isn't included] Signed-off-by: Paul Moore <[email protected]>
Kunwu Chan [Mon, 15 Jan 2024 08:28:25 +0000 (16:28 +0800)]
igb: Fix string truncation warnings in igb_set_fw_version
Commit 1978d3ead82c ("intel: fix string truncation warnings")
fixes '-Wformat-truncation=' warnings in igb_main.c by using kasprintf.
drivers/net/ethernet/intel/igb/igb_main.c:3092:53: warning：‘%d’ directive output may be truncated writing between 1 and 5 bytes into a region of size between 1 and 13 [-Wformat-truncation=]
3092 | "%d.%d, 0x%08x, %d.%d.%d",
| ^~
drivers/net/ethernet/intel/igb/igb_main.c:3092:34: note：directive argument in the range [0, 65535]
3092 | "%d.%d, 0x%08x, %d.%d.%d",
| ^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/intel/igb/igb_main.c:3092:34: note：directive argument in the range [0, 65535]
drivers/net/ethernet/intel/igb/igb_main.c:3090:25: note：‘snprintf’ output between 23 and 43 bytes into a destination of size 32
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.
Fix this warning by using a larger space for adapter->fw_version,
and then fall back and continue to use snprintf.
Where that s->saved_cmdlines allocation looks to be a dangling allocation
to kmemleak. That's because kmemleak only keeps track of kmalloc()
allocations. For allocations that use page_alloc() directly, the kmemleak
needs to be explicitly informed about it.
Add kmemleak_alloc() and kmemleak_free() around the page allocation so
that it doesn't give the following false positive:
Paolo Bonzini [Wed, 14 Feb 2024 17:34:58 +0000 (12:34 -0500)]
Merge tag 'kvm-x86-selftests-6.8-rcN' of https://github.com/kvm-x86/linux into HEAD
KVM selftests fixes/cleanups (and one KVM x86 cleanup) for 6.8:
- Remove redundant newlines from error messages.
- Delete an unused variable in the AMX test (which causes build failures when
compiling with -Werror).
- Fail instead of skipping tests if open(), e.g. of /dev/kvm, fails with an
error code other than ENOENT (a Hyper-V selftest bug resulted in an EMFILE,
and the test eventually got skipped).
- Fix TSC related bugs in several Hyper-V selftests.
- Fix a bug in the dirty ring logging test where a sem_post() could be left
pending across multiple runs, resulting in incorrect synchronization between
the main thread and the vCPU worker thread.
- Relax the dirty log split test's assertions on 4KiB mappings to fix false
positives due to the number of mappings for memslot 0 (used for code and
data that is NOT being dirty logged) changing, e.g. due to NUMA balancing.
- Have KVM's gtod_is_based_on_tsc() return "bool" instead of an "int" (the
function generates boolean values, and all callers treat the return value as
a bool).
Paolo Bonzini [Wed, 14 Feb 2024 17:34:43 +0000 (12:34 -0500)]
Merge tag 'kvm-x86-fixes-6.8-rcN' of https://github.com/kvm-x86/linux into HEAD
KVM x86 fixes for 6.8:
- Make a KVM_REQ_NMI request while handling KVM_SET_VCPU_EVENTS if and only
if the incoming events->nmi.pending is non-zero. If the target vCPU is in
the UNITIALIZED state, the spurious request will result in KVM exiting to
userspace, which in turn causes QEMU to constantly acquire and release
QEMU's global mutex, to the point where the BSP is unable to make forward
progress.
- Fix a type (u8 versus u64) goof that results in pmu->fixed_ctr_ctrl being
incorrectly truncated, and ultimately causes KVM to think a fixed counter
has already been disabled (KVM thinks the old value is '0').
- Fix a stack leak in KVM_GET_MSRS where a failed MSR read from userspace
that is ultimately ignored due to ignore_msrs=true doesn't zero the output
as intended.
Arnd Bergmann [Fri, 9 Feb 2024 16:34:54 +0000 (16:34 +0000)]
nvmem: include bit index in cell sysfs file name
Creating sysfs files for all Cells caused a boot failure for linux-6.8-rc1 on
Apple M1, which (in downstream dts files) has multiple nvmem cells that use the
same byte address. This causes the device probe to fail with
As far as I can tell, this is a problem for any device with multiple cells on
different bits of the same address. Avoid the issue by changing the file name
to include the first bit number.
Merge tag 'iio-fixes-for-6.8a' of http://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
IIO: 1st set of fixes for the 6.8 cycle
Usual mixed bag of issues introduced this cycle and fixes for long term
issues that have been identified recently + one case where I messed up
a merge resolution and dropped the build file changes.
Most important is the userspace ABI fix for the iio_modifier enum
where we accidentally added new entries in the middle rather than at
the end.
IIO Core
- Close a memory leak in an error path.
- Move LIGHT_UVA and LIGHT_UVB definitions to end of the iio_modifier
enum to avoid breaking older userspace. (not yet in a released kernel
thankfully).
adi,adis
- Fix a DMA buffer alignment issue that was missing in series that fixed
these across IIO.
adi,ad-sigma-delta
- Fix a DMA buffer alignment issue that was missing in series that fixed
these across IIO.
adi,ad4130
- Zero init remaining fields of clock init data.
- Only set GPIO control bits on pins that aren't in use for anything else.
adi,ad5933
- Fix an old bug due to type mismatch. This is a rare device so good to
get some new test coverage.
adi,ad7091r
- Use right variable for an error return code.
bosch,bmp280:
- Add missing bmp085 ID to the SPI table to avoid mismatch with the
of_device_id table.
hid-sensors:
- Avoid returning an error for timestamp read back that succeeds.
pni,rm3100
- Check value read from RM31000_REG_TMRC register is valid before using
it. Hardening to avoid a real world issue seen on some faulty hardware.
st,st-sensors
- Fix a DMA buffer alignment issue that was missing in series that fixed
these across IIO.
ti,hdc3020
- Add missing Kconfig and Makefile entrees accidentally dropped when patches
were applied.
- Fix wrong temperature offset (negated)
* tag 'iio-fixes-for-6.8a' of http://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: adc: ad4130: only set GPIO_CTRL if pin is unused
iio: adc: ad4130: zero-initialize clock init data
iio: accel: bma400: Fix a compilation problem
iio: commom: st_sensors: ensure proper DMA alignment
iio: hid-sensor-als: Return 0 for HID_USAGE_SENSOR_TIME_TIMESTAMP
iio: move LIGHT_UVA and LIGHT_UVB to the end of iio_modifier
staging: iio: ad5933: fix type mismatch regression
iio: humidity: hdc3020: fix temperature offset
iio: adc: ad7091r8: Fix error code in ad7091r8_gpio_setup()
iio: adc: ad_sigma_delta: ensure proper DMA alignment
iio: imu: adis: ensure proper DMA alignment
iio: humidity: hdc3020: Add Makefile, Kconfig and MAINTAINERS entry
iio: imu: bno055: serdev requires REGMAP
iio: magnetometer: rm3100: add boundary check for the value read from RM3100_REG_TMRC
iio: pressure: bmp280: Add missing bmp085 to SPI id table
iio: core: fix memleak in iio_device_register_sysfs
Few users have observed display corruption when they boot
the machine to KDE Plasma or playing games. We have root
caused the problem that whenever alloc_range() couldn't
find the required memory blocks the function was returning
SUCCESS in some of the corner cases.
The right approach would be if the total allocated size
is less than the required size, the function should
return -ENOSPC.
powerpc/iommu: Fix the missing iommu_group_put() during platform domain attach
The function spapr_tce_platform_iommu_attach_dev() is missing to call
iommu_group_put() when the domain is already set. This refcount leak
shows up with BUG_ON() during DLPAR remove operation as:
KernelBug: Kernel bug in state 'None': kernel BUG at arch/powerpc/platforms/pseries/iommu.c:100!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=8192 NUMA pSeries
<snip>
Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_016) hv:phyp pSeries
NIP: c0000000000ff4d4 LR: c0000000000ff4cc CTR: 0000000000000000
REGS: c0000013aed5f840 TRAP: 0700 Tainted: G I (6.8.0-rc3-autotest-g99bd3cb0d12e)
MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 44002402 XER: 20040000
CFAR: c000000000a0d170 IRQMASK: 0
...
NIP iommu_reconfig_notifier+0x94/0x200
LR iommu_reconfig_notifier+0x8c/0x200
Call Trace:
iommu_reconfig_notifier+0x8c/0x200 (unreliable)
notifier_call_chain+0xb8/0x19c
blocking_notifier_call_chain+0x64/0x98
of_reconfig_notify+0x44/0xdc
of_detach_node+0x78/0xb0
ofdt_write.part.0+0x86c/0xbb8
proc_reg_write+0xf4/0x150
vfs_write+0xf8/0x488
ksys_write+0x84/0x140
system_call_exception+0x138/0x330
system_call_vectored_common+0x15c/0x2ec
The patch adds the missing iommu_group_put() call.
Maxime Jayat [Mon, 6 Nov 2023 18:01:58 +0000 (19:01 +0100)]
can: netlink: Fix TDCO calculation using the old data bittiming
The TDCO calculation was done using the currently applied data bittiming,
instead of the newly computed data bittiming, which means that the TDCO
had an invalid value unless setting the same data bittiming twice.
Oleksij Rempel [Fri, 20 Oct 2023 13:38:14 +0000 (15:38 +0200)]
can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER)
Lock jsk->sk to prevent UAF when setsockopt(..., SO_J1939_FILTER, ...)
modifies jsk->filters while receiving packets.
Following trace was seen on affected system:
==================================================================
BUG: KASAN: slab-use-after-free in j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939]
Read of size 4 at addr ffff888012144014 by task j1939/350
A reasonable fix is to change j1939_socks_lock to an rwlock, since in
the rare situations where a write lock is required for the linked list
that j1939_socks_lock is protecting, the code does not attempt to
acquire any more locks. This would break the circular lock dependency,
where, for example, the current thread already locks j1939_socks_lock
and attempts to acquire sk_session_queue_lock, and at the same time,
another thread attempts to acquire j1939_socks_lock while holding
sk_session_queue_lock.
NOTE: This patch along does not fix the unregister_netdevice bug
reported by Syzbot; instead, it solves a deadlock situation to prepare
for one or more further patches to actually fix the Syzbot bug, which
appears to be a reference counting problem within the j1939 codebase.
Arnd Bergmann [Tue, 13 Feb 2024 10:16:34 +0000 (11:16 +0100)]
ethernet: cpts: fix function pointer cast warnings
clang-16 warns about the mismatched prototypes for the devm_* callbacks:
drivers/net/ethernet/ti/cpts.c:691:12: error: cast from 'void (*)(struct clk_hw *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
691 | (void(*)(void *))clk_hw_unregister_mux,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/device.h:406:34: note: expanded from macro 'devm_add_action_or_reset'
406 | __devm_add_action_or_reset(dev, action, data, #action)
| ^~~~~~
drivers/net/ethernet/ti/cpts.c:703:12: error: cast from 'void (*)(struct device_node *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
703 | (void(*)(void *))of_clk_del_provider,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/device.h:406:34: note: expanded from macro 'devm_add_action_or_reset'
406 | __devm_add_action_or_reset(dev, action, data, #action)
Use separate helper functions for this instead, using the expected prototypes
with a void* argument.
Fixes: a3047a81ba13 ("net: ethernet: ti: cpts: add support for ext rftclk selection") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Arnd Bergmann [Tue, 13 Feb 2024 10:07:50 +0000 (11:07 +0100)]
bnad: fix work_queue type mismatch
clang-16 warns about a function pointer cast:
drivers/net/ethernet/brocade/bna/bnad.c:1995:4: error: cast from 'void (*)(struct delayed_work *)' to 'work_func_t' (aka 'void (*)(struct work_struct *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
1995 | (work_func_t)bnad_tx_cleanup);
drivers/net/ethernet/brocade/bna/bnad.c:2252:4: error: cast from 'void (*)(void *)' to 'work_func_t' (aka 'void (*)(struct work_struct *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
2252 | (work_func_t)(bnad_rx_cleanup));
The problem here is mixing up work_struct and delayed_work, which relies
the former being the first member of the latter.
Change the code to use consistent types here to address the warning and
make it more robust against workqueue interface changes.
Side note: the use of a delayed workqueue for cleaning up TX descriptors
is probably a bad idea since this introduces a noticeable delay. The
driver currently does not appear to use BQL, but if one wanted to add
that, this would have to be changed as well.
Fixes: 01b54b145185 ("bna: tx rx cleanup fix") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Dmitry Antipov [Mon, 12 Feb 2024 14:34:02 +0000 (17:34 +0300)]
net: smc: fix spurious error message from __sock_release()
Commit 67f562e3e147 ("net/smc: transfer fasync_list in case of fallback")
leaves the socket's fasync list pointer within a container socket as well.
When the latter is destroyed, '__sock_release()' warns about its non-empty
fasync list, which is a dangling pointer to previously freed fasync list
of an underlying TCP socket. Fix this spurious warning by nullifying
fasync list of a container socket.
Fixes: 67f562e3e147 ("net/smc: transfer fasync_list in case of fallback") Signed-off-by: Dmitry Antipov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
David S. Miller [Wed, 14 Feb 2024 10:37:33 +0000 (10:37 +0000)]
Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-02-12 (i40e)
This series contains updates to i40e driver only.
Ivan Vecera corrects the looping value used while waiting for queues to
be disabled as well as an incorrect mask being used for DCB
configuration.
Maciej resolves an issue related to XDP traffic; removing a double call to
i40e_pf_rxq_wait() and accounting for XDP rings when stopping rings.
====================
octeontx2-af: Remove the PF_FUNC validation for NPC transmit rules
NPC transmit side mcam rules can use the pcifunc (in packet metadata
added by hardware) of transmitting device for mcam lookup similar to
the channel of receiving device at receive side.
The commit 18603683d766 ("octeontx2-af: Remove channel verification
while installing MCAM rules") removed the receive side channel
verification to save hardware MCAM filters while switching packets
across interfaces but missed removing transmit side checks.
This patch removes transmit side rules validation.
Fixes: 18603683d766 ("octeontx2-af: Remove channel verification while installing MCAM rules") Signed-off-by: Subbaraya Sundeep <[email protected]> Signed-off-by: David S. Miller <[email protected]>
ALSA: hda/realtek: cs35l41: Fix device ID / model name
The patch 51d976079976c800ef19ed1b542602fcf63f0edb ("ALSA: hda/realtek:
Add quirks for ASUS Zenbook 2022 Models") modified the entry 1043:1e2e
from "ASUS UM3402" to "ASUS UM6702RA/RC" and added another entry for
"ASUS UM3402" with 104e:1ee2.
The first entry was correct, while the new one corresponds to model
"ASUS UM6702RA/RC"
Fix the model names for both devices.
Shrikanth Hegde [Tue, 13 Feb 2024 05:26:35 +0000 (10:56 +0530)]
powerpc/pseries: fix accuracy of stolen time
powerVM hypervisor updates the VPA fields with stolen time data.
It currently reports enqueue_dispatch_tb and ready_enqueue_tb for
this purpose. In linux these two fields are used to report the stolen time.
The VPA fields are updated at the TB frequency. On powerPC its mostly
set at 512Mhz. Hence this needs a conversion to ns when reporting it
back as rest of the kernel timings are in ns. This conversion is already
handled in tb_to_ns function. So use that function to report accurate
stolen time.
Observed this issue and used an Capped Shared Processor LPAR(SPLPAR) to
simplify the experiments. In all these cases, 100% VP Load is run using
stress-ng workload. Values of stolen time is in percentages as reported
by mpstat. With the patch values are close to expected.
Naveen N Rao [Tue, 13 Feb 2024 17:54:10 +0000 (23:24 +0530)]
powerpc/ftrace: Ignore ftrace locations in exit text sections
Michael reported that we are seeing an ftrace bug on bootup when KASAN
is enabled and we are using -fpatchable-function-entry:
ftrace: allocating 47780 entries in 18 pages
ftrace-powerpc: 0xc0000000020b3d5c: No module provided for non-kernel address
------------[ ftrace bug ]------------
ftrace faulted on modifying
[<c0000000020b3d5c>] 0xc0000000020b3d5c
Initializing ftrace call sites
ftrace record flags: 0
(0)
expected tramp: c00000000008cef4
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:2180 ftrace_bug+0x3c0/0x424
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0-rc3-00120-g0f71dcfb4aef #860
Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries
NIP: c0000000003aa81c LR: c0000000003aa818 CTR: 0000000000000000
REGS: c0000000033cfab0 TRAP: 0700 Not tainted (6.5.0-rc3-00120-g0f71dcfb4aef)
MSR: 8000000002021033 <SF,VEC,ME,IR,DR,RI,LE> CR: 28028240 XER: 00000000
CFAR: c0000000002781a8 IRQMASK: 3
...
NIP [c0000000003aa81c] ftrace_bug+0x3c0/0x424
LR [c0000000003aa818] ftrace_bug+0x3bc/0x424
Call Trace:
ftrace_bug+0x3bc/0x424 (unreliable)
ftrace_process_locs+0x5f4/0x8a0
ftrace_init+0xc0/0x1d0
start_kernel+0x1d8/0x484
With CONFIG_FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY=y and
CONFIG_KASAN=y, compiler emits nops in functions that it generates for
registering and unregistering global variables (unlike with -pg and
-mprofile-kernel where calls to _mcount() are not generated in those
functions). Those functions then end up in INIT_TEXT and EXIT_TEXT
respectively. We don't expect to see any profiled functions in
EXIT_TEXT, so ftrace_init_nop() assumes that all addresses that aren't
in the core kernel text belongs to a module. Since these functions do
not match that criteria, we see the above bug.
Address this by having ftrace ignore all locations in the text exit
sections of vmlinux.
David Engraf [Wed, 7 Feb 2024 09:27:58 +0000 (10:27 +0100)]
powerpc/cputable: Add missing PPC_FEATURE_BOOKE on PPC64 Book-E
Commit e320a76db4b0 ("powerpc/cputable: Split cpu_specs[] out of
cputable.h") moved the cpu_specs to separate header files. Previously
PPC_FEATURE_BOOKE was enabled by CONFIG_PPC_BOOK3E_64. The definition in
cpu_specs_e500mc.h for PPC64 no longer enables PPC_FEATURE_BOOKE.
This breaks user space reading the ELF hwcaps and expect
PPC_FEATURE_BOOKE. Debugging an application with gdb is no longer
working on e5500/e6500 because the 64-bit detection relies on
PPC_FEATURE_BOOKE for Book-E.
Michael Ellerman [Mon, 12 Feb 2024 06:42:44 +0000 (17:42 +1100)]
powerpc/kasan: Limit KASAN thread size increase to 32KB
KASAN is seen to increase stack usage, to the point that it was reported
to lead to stack overflow on some 32-bit machines (see link).
To avoid overflows the stack size was doubled for KASAN builds in
commit 3e8635fb2e07 ("powerpc/kasan: Force thread size increase with
KASAN").
However with a 32KB stack size to begin with, the doubling leads to a
64KB stack, which causes build errors:
arch/powerpc/kernel/switch.S:249: Error: operand out of range (0x000000000000fe50 is not between 0xffffffffffff8000 and 0x0000000000007fff)
Although the asm could be reworked, in practice a 32KB stack seems
sufficient even for KASAN builds - the additional usage seems to be in
the 2-3KB range for a 64-bit KASAN build.
So only increase the stack for KASAN if the stack size is < 32KB.
Remove superfluous initialization of status variable in
nvmet_execute_admin_connect() and nvmet_execute_io_connect(), since it
will get overwritten by nvmet_copy_from_sgl().
ASoC: cs35l56: Workaround for ACPI with broken spk-id-gpios property
The ACPI in some SoundWire laptops has a spk-id-gpios property but
it points to the wrong Device node. This patch adds a workaround to
try to get the GPIO directly from the correct Device node.
If the attempt to get the GPIOs from the property fails, the workaround
looks for the SDCA node "AF01", which is where the GpioIo resource is
defined. If this exists, a spk-id-gpios mapping is added to that node
and then the GPIO is got from that node using the property.
Will Deacon [Mon, 12 Feb 2024 19:30:52 +0000 (19:30 +0000)]
KVM: arm64: Fix double-free following kvm_pgtable_stage2_free_unlinked()
kvm_pgtable_stage2_free_unlinked() does the final put_page() on the
root page of the sub-tree before returning, so remove the additional
put_page() invocations in the callers.
Jakub Kicinski [Tue, 13 Feb 2024 18:19:07 +0000 (10:19 -0800)]
Merge branch 'selftests-net-more-pmtu-sh-fixes'
Paolo Abeni says:
====================
selftests: net: more pmtu.sh fixes
The mentioned test is still flaky, unusally enough in 'fast'
environments.
Patch 2/2 [try to] address the existing issues, while patch 1/2
introduces more strict tests for the existing net helpers, to hopefully
prevent future pain.
====================
Paolo Abeni [Mon, 12 Feb 2024 10:19:23 +0000 (11:19 +0100)]
selftests: net: more strict check in net_helper
The helper waiting for a listener port can match any socket whose
hexadecimal representation of source or destination addresses
matches that of the given port.
Additionally, any socket state is accepted.
All the above can let the helper return successfully before the
relevant listener is actually ready, with unexpected results.
So far I could not find any related failure in the netdev CI, but
the next patch is going to make the critical event more easily
reproducible.
Address the issue matching the port hex only vs the relevant socket
field and additionally checking the socket state for TCP sockets.
Since commit 28270e25c69a ("btrfs: always reserve space for delayed refs
when starting transaction") we started not only to reserve metadata space
for the delayed refs a caller of btrfs_start_transaction() might generate
but also to try to fully refill the delayed refs block reserve, because
there are several case where we generate delayed refs and haven't reserved
space for them, relying on the global block reserve. Relying too much on
the global block reserve is not always safe, and can result in hitting
-ENOSPC during transaction commits or worst, in rare cases, being unable
to mount a filesystem that needs to do orphan cleanup or anything that
requires modifying the filesystem during mount, and has no more
unallocated space and the metadata space is nearly full. This was
explained in detail in that commit's change log.
However the gap between the reserved amount and the size of the delayed
refs block reserve can be huge, so attempting to reserve space for such
a gap can result in allocating many metadata block groups that end up
not being used. After a recent patch, with the subject:
"btrfs: add new unused block groups to the list of unused block groups"
We started to add new block groups that are unused to the list of unused
block groups, to avoid having them around for a very long time in case
they are never used, because a block group is only added to the list of
unused block groups when we deallocate the last extent or when mounting
the filesystem and the block group has 0 bytes used. This is not a problem
introduced by the commit mentioned earlier, it always existed as our
metadata space reservations are, most of the time, pessimistic and end up
not using all the space they reserved, so we can occasionally end up with
one or two unused metadata block groups for a long period. However after
that commit mentioned earlier, we are just more pessimistic in the
metadata space reservations when starting a transaction and therefore the
issue is more likely to happen.
This however is not always enough because we might create unused metadata
block groups when reserving metadata space at a high rate if there's
always a gap in the delayed refs block reserve and the cleaner kthread
isn't triggered often enough or is busy with other work (running delayed
iputs, cleaning deleted roots, etc), not to mention the block group's
allocated space is only usable for a new block group after the transaction
used to remove it is committed.
A user reported that he's getting a lot of allocated metadata block groups
but the usage percentage of metadata space was very low compared to the
total allocated space, specially after running a series of block group
relocations.
So for now stop trying to refill the gap in the delayed refs block reserve
and reserve space only for the delayed refs we are expected to generate
when starting a transaction.
Filipe Manana [Mon, 12 Feb 2024 21:50:53 +0000 (21:50 +0000)]
btrfs: zoned: fix chunk map leak when loading block group zone info
At btrfs_load_block_group_zone_info() we never drop a reference on the
chunk map we have looked up, therefore leaking a reference on it. So
add the missing btrfs_free_chunk_map() at the end of the function.
Filipe Manana [Fri, 2 Feb 2024 12:09:22 +0000 (12:09 +0000)]
btrfs: reject encoded write if inode has nodatasum flag set
Currently we allow an encoded write against inodes that have the NODATASUM
flag set, either because they are NOCOW files or they were created while
the filesystem was mounted with "-o nodatasum". This results in having
compressed extents without corresponding checksums, which is a filesystem
inconsistency reported by 'btrfs check'.
For example, running btrfs/281 with MOUNT_OPTIONS="-o nodatacow" triggers
this and 'btrfs check' errors out with:
[1/7] checking root items
[2/7] checking extents
[3/7] checking free space tree
[4/7] checking fs roots
root 256 inode 257 errors 1040, bad file extent, some csum missing
root 256 inode 258 errors 1040, bad file extent, some csum missing
ERROR: errors found in fs roots
(...)
So reject encoded writes if the target inode has NODATASUM set.
Filipe Manana [Wed, 31 Jan 2024 17:18:04 +0000 (17:18 +0000)]
btrfs: don't reserve space for checksums when writing to nocow files
Currently when doing a write to a file we always reserve metadata space
for inserting data checksums. However we don't need to do it if we have
a nodatacow file (-o nodatacow mount option or chattr +C) or if checksums
are disabled (-o nodatasum mount option), as in that case we are only
adding unnecessary pressure to metadata reservations.
For example on x86_64, with the default node size of 16K, a 4K buffered
write into a nodatacow file is reserving 655360 bytes of metadata space,
as it's accounting for checksums. After this change, which stops reserving
space for checksums if we have a nodatacow file or checksums are disabled,
we only need to reserve 393216 bytes of metadata.
Align the IPC4 firmware path/name and the topology path to the documentation:
default_fw_path: intel/sof-ipc4/{platform_name}
default_lib_path: intel/sof-ipc4-lib/{platform_name}
default_tplg_path: intel/sof-ipc4-tplg
default_fw_filename: sof-{platform_name}.ri
Tiger Lake and Lunar Lake support is not yet available via the official
firmware release, the paths can be changed now to avoid misalignment in the
future.
Regards,
Peter
---
Peter Ujfalusi (2):
ASoC: SOF: Intel: pci-tgl: Change the default paths and firmware names
ASoC: SOF: Intel: pci-lnl: Change the topology path to
intel/sof-ipc4-tplg
Sven Schnelle [Mon, 5 Feb 2024 06:53:40 +0000 (07:53 +0100)]
tracing: Use ring_buffer_record_is_set_on() in tracer_tracing_is_on()
tracer_tracing_is_on() checks whether record_disabled is not zero. This
checks both the record_disabled counter and the RB_BUFFER_OFF flag.
Reading the source it looks like this function should only check for
the RB_BUFFER_OFF flag. Therefore use ring_buffer_record_is_set_on().
This fixes spurious fails in the 'test for function traceon/off triggers'
test from the ftrace testsuite when the system is under load.
Petr Pavlu [Tue, 13 Feb 2024 13:24:34 +0000 (14:24 +0100)]
tracing: Fix HAVE_DYNAMIC_FTRACE_WITH_REGS ifdef
Commit a8b9cf62ade1 ("ftrace: Fix DIRECT_CALLS to use SAVE_REGS by
default") attempted to fix an issue with direct trampolines on x86, see
its description for details. However, it wrongly referenced the
HAVE_DYNAMIC_FTRACE_WITH_REGS config option and the problem is still
present.
Add the missing "CONFIG_" prefix for the logic to work as intended.
Keith Busch [Mon, 5 Feb 2024 19:10:25 +0000 (11:10 -0800)]
nvme: implement support for relaxed effects
NVM Express TP4167 provides a way for controllers to report a relaxed
execution constraint. Specifically, it notifies of exclusivity for IO
vs. admin commands instead of grouping these together. If set, then we
don't need to freeze IO in order to execute that admin command. The
freezing distrupts IO processes, so it's nice to avoid that if the
controller tells us it's not necessary.
Linus Torvalds [Tue, 13 Feb 2024 16:38:57 +0000 (08:38 -0800)]
Merge tag 'trace-tools-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing tooling fixes from Steven Rostedt:
"RTLA:
- rtla tools are exiting with a positive value when usage() is
called. Make them return 0 if the usage was called via -h/--help
- the -P priority sets the sched priority for rtla workload. When the
SCHED_OTHER scheduler is selected, it sets the rt_priority instead
of the nice parameter. Setting the nice value is the correct thing,
so fix it
- rtla is failing to compile with clang due to unsupported options
from gcc. Adjusting the compiler/linker options makes clang work
properly
- Remove the sched_getattr() unused function on utils.c
- Fixes for variable initialization and size, reported by clang
Verification:
- rv is failing to compile with clang due to unsupported options from
gcc. Adjusting the compiler/linker options makes clang work
properly
- Fix an uninitialized variable on in_kernel.c reported by clang"
* tag 'trace-tools-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tools/rtla: Exit with EXIT_SUCCESS when help is invoked
tools/rtla: Replace setting prio with nice for SCHED_OTHER
tools/rv: Fix curr_reactor uninitialized variable
tools/rv: Fix Makefile compiler options for clang
tools/rtla: Remove unused sched_getattr() function
tools/rtla: Fix clang warning about mount_point var size
tools/rtla: Fix uninitialized bucket/data->bucket_size warning
tools/rtla: Fix Makefile compiler options for clang
Rob Herring [Wed, 24 Jan 2024 19:07:33 +0000 (13:07 -0600)]
dt-bindings: ufs: samsung,exynos-ufs: Add size constraints on "samsung,sysreg"
The 'phandle-array' type is a bit ambiguous. It can be either just an
array of phandles or an array of phandles plus args. "samsung,sysreg" is
the latter and needs to be constrained to a single entry with a phandle and
offset.
In nvmf_connect_io_queue(), if connect I/O command fails, we log the
error and continue for authentication. This overrides error captured
from __nvme_submit_sync_cmd(), causing wrong return value.
Add goto out_free_data after logging connect error to fix the issue.
There was a change in the mxs-dma engine that uses a new custom flag.
The change was not applied to the mxs spi driver.
This results in chipselect being deasserted too early.
This fixes the chipselect problem by using the new flag in the mxs-spi
driver.
Philip Yang [Mon, 21 Aug 2023 20:02:01 +0000 (16:02 -0400)]
drm/prime: Support page array >= 4GB
Without unsigned long typecast, the size is passed in as zero if page
array size >= 4GB, nr_pages >= 0x100000, then sg list converted will
have the first and the last chunk lost.
Curtis Malainey [Tue, 13 Feb 2024 12:38:34 +0000 (14:38 +0200)]
ASoC: SOF: IPC3: fix message bounds on ipc ops
commit 74ad8ed65121 ("ASoC: SOF: ipc3: Implement rx_msg IPC ops")
introduced a new allocation before the upper bounds check in
do_rx_work. As a result A DSP can cause bad allocations if spewing
garbage.
projects / linux.git / log