If there is a lot(more then 16) of virtio-console devices
or virtio_console module is reloaded
- buffers 'vtermnos' and 'cons_ops' are overflowed.
In older kernels it overruns spinlock which leads to kernel freezing:
https://bugzilla.redhat.com/show_bug.cgi?id=1786239
To reproduce the issue, you can try simple script that
loads/unloads module. Something like this:
while [ 1 ]
do
modprobe virtio_console
sleep 2
modprobe -r virtio_console
sleep 2
done
Description of problem:
Guest get 'Call Trace' when loading module "virtio_console"
and unloading it frequently - clearly reproduced on kernel-4.18.0:
init_r_port can access pc104 array out of bounds. pc104 is a 2D array
defined to have 4 members. Each member has 8 submembers.
* we can have more than 4 (PCI) boards, i.e. [board] can be OOB
* line is not modulo-ed by anything, so the first line on the second
board can be 4, on the 3rd 12 or alike (depending on previously
registered boards). It's zero only on the first line of the first
board. So even [line] can be OOB, quite soon (with the 2nd registered
board already).
This code is broken for ages, so just avoid the OOB accesses and don't
try to fix it as we would need to find out the correct line number. Use
the default: RS232, if we are out.
Generally, if anyone needs to set the interface types, a module parameter
is past the last thing that should be used for this purpose. The
parameters' description says it's for ISA cards anyway.
Nicolas Pitre [Sat, 28 Mar 2020 21:32:42 +0000 (17:32 -0400)]
vt: don't hardcode the mem allocation upper bound
The code in vc_do_resize() bounds the memory allocation size to avoid
exceeding MAX_ORDER down the kzalloc() call chain and generating a
runtime warning triggerable from user space. However, not only is it
unwise to use a literal value here, but MAX_ORDER may also be
configurable based on CONFIG_FORCE_MAX_ZONEORDER.
Let's use KMALLOC_MAX_SIZE instead.
Note that prior commit bb1107f7c605 ("mm, slab: make sure that
KMALLOC_MAX_SIZE will fit into MAX_ORDER") the KMALLOC_MAX_SIZE value
could not be relied upon.
commit 8ba92cf59335 ("arm64: dts: actions: s700: Add Clock Management Unit")
breaks the UART on Cubieboard7-lite (based on S700 SoC), This is due to the
fact that generic clk routine clk_disable_unused() disables the gate clks,
and that in turns disables OWL UART (but UART driver never enables it). To
prove this theory, Andre suggested to use "clk_ignore_unused" in kernel
commnd line and it worked (Kernel happily lands into RAMFS world :)).
This commit fix this up by adding clk_prepare_enable().
Nicolas Pitre [Sun, 29 Mar 2020 02:25:11 +0000 (22:25 -0400)]
vt: don't use kmalloc() for the unicode screen buffer
Even if the actual screen size is bounded in vc_do_resize(), the unicode
buffer is still a little more than twice the size of the glyph buffer
and may exceed MAX_ORDER down the kmalloc() path. This can be triggered
from user space.
Since there is no point having a physically contiguous buffer here,
let's avoid the above issue as well as reducing pressure on high order
allocations by using vmalloc() instead.
Changming Liu [Tue, 21 Apr 2020 03:41:25 +0000 (23:41 -0400)]
USB: sisusbvga: Change port variable from signed to unsigned
Change a bunch of arguments of wrapper functions which pass signed
integer to an unsigned integer which might cause undefined behaviors
when sign integer overflow.
Alan Stern [Wed, 22 Apr 2020 20:14:57 +0000 (16:14 -0400)]
usb-storage: Add unusual_devs entry for JMicron JMS566
Cyril Roelandt reports that his JMicron JMS566 USB-SATA bridge fails
to handle WRITE commands with the FUA bit set, even though it claims
to support FUA. (Oddly enough, a later version of the same bridge,
version 2.03 as opposed to 1.14, doesn't claim to support FUA. Also
oddly, the bridge _does_ support FUA when using the UAS transport
instead of the Bulk-Only transport -- but this device was blacklisted
for uas in commit bc3bdb12bbb3 ("usb-storage: Disable UAS on JMicron
SATA enclosure") for apparently unrelated reasons.)
This patch adds a usb-storage unusual_devs entry with the BROKEN_FUA
flag. This allows the bridge to work properly with usb-storage.
Alan Stern [Wed, 22 Apr 2020 20:13:08 +0000 (16:13 -0400)]
USB: hub: Revert commit bd0e6c9614b9 ("usb: hub: try old enumeration scheme first for high speed devices")
Commit bd0e6c9614b9 ("usb: hub: try old enumeration scheme first for
high speed devices") changed the way the hub driver enumerates
high-speed devices. Instead of using the "new" enumeration scheme
first and switching to the "old" scheme if that doesn't work, we start
with the "old" scheme. In theory this is better because the "old"
scheme is slightly faster -- it involves resetting the device only
once instead of twice.
However, for a long time Windows used only the "new" scheme. Zeng Tao
said that Windows 8 and later use the "old" scheme for high-speed
devices, but apparently there are some devices that don't like it.
William Bader reports that the Ricoh webcam built into his Sony Vaio
laptop not only doesn't enumerate under the "old" scheme, it gets hung
up so badly that it won't then enumerate under the "new" scheme! Only
a cold reset will fix it.
Therefore we will revert the commit and go back to trying the "new"
scheme first for high-speed devices.
Alan Stern [Wed, 22 Apr 2020 20:09:51 +0000 (16:09 -0400)]
USB: hub: Fix handling of connect changes during sleep
Commit 8099f58f1ecd ("USB: hub: Don't record a connect-change event
during reset-resume") wasn't very well conceived. The problem it
tried to fix was that if a connect-change event occurred while the
system was asleep (such as a device disconnecting itself from the bus
when it is suspended and then reconnecting when it resumes)
requiring a reset-resume during the system wakeup transition, the hub
port's change_bit entry would remain set afterward. This would cause
the hub driver to believe another connect-change event had occurred
after the reset-resume, which was wrong and would lead the driver to
send unnecessary requests to the device (which could interfere with a
firmware update).
The commit tried to fix this by not setting the change_bit during the
wakeup. But this was the wrong thing to do; it means that when a
device is unplugged while the system is asleep, the hub driver doesn't
realize anything has happened: The change_bit flag which would tell it
to handle the disconnect event is clear.
The commit needs to be reverted and the problem fixed in a different
way. Fortunately an alternative solution was noted in the commit's
Changelog: We can continue to set the change_bit entry in
hub_activate() but then clear it when a reset-resume occurs. That way
the the hub driver will see the change_bit when a device is
disconnected but won't see it when the device is still present.
Xiyu Yang [Mon, 20 Apr 2020 05:44:16 +0000 (13:44 +0800)]
staging: comedi: Fix comedi_device refcnt leak in comedi_open
comedi_open() invokes comedi_dev_get_from_minor(), which returns a
reference of the COMEDI device to "dev" with increased refcount.
When comedi_open() returns, "dev" becomes invalid, so the refcount
should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of
comedi_open(). When "cfp" allocation is failed, the refcnt increased by
comedi_dev_get_from_minor() is not decreased, causing a refcnt leak.
Fix this issue by calling comedi_dev_put() on this error path when "cfp"
allocation is failed.
ALSA: hda: Always use jackpoll helper for jack update after resume
HD-audio codec driver applies a tricky procedure to forcibly perform
the runtime resume by mimicking the usage count even if the device has
been runtime-suspended beforehand. This was needed to assure to
trigger the jack detection update after the system resume.
And recently we also applied the similar logic to the HD-audio
controller side. However this seems leading to some inconsistency,
and eventually PCI controller gets screwed up.
This patch is an attempt to fix and clean up those behavior: instead
of the tricky runtime resume procedure, the existing jackpoll work is
scheduled when such a forced codec resume is required. The jackpoll
work will power up the codec, and this alone should suffice for the
jack status update in usual cases. If the extra polling is requested
(by checking codec->jackpoll_interval), the manual update is invoked
after that, and the codec is powered down again.
Also, we filter the spurious wake up of the codec from the controller
runtime resume by checking codec->relaxed_resume flag. If this flag
is set, basically we don't need to wake up explicitly, but it's
supposed to be done via the audio component notifier.
Xiyu Yang [Thu, 23 Apr 2020 04:54:19 +0000 (12:54 +0800)]
ALSA: usb-audio: Fix usb audio refcnt leak when getting spdif
snd_microii_spdif_default_get() invokes snd_usb_lock_shutdown(), which
increases the refcount of the snd_usb_audio object "chip".
When snd_microii_spdif_default_get() returns, local variable "chip"
becomes invalid, so the refcount should be decreased to keep refcount
balanced.
The reference counting issue happens in several exception handling paths
of snd_microii_spdif_default_get(). When those error scenarios occur
such as usb_ifnum_to_if() returns NULL, the function forgets to decrease
the refcnt increased by snd_usb_lock_shutdown(), causing a refcnt leak.
Fix this issue by jumping to "end" label when those error scenarios
occur.
David Ahern [Mon, 20 Apr 2020 16:18:43 +0000 (10:18 -0600)]
libbpf: Only check mode flags in get_xdp_id
The commit in the Fixes tag changed get_xdp_id to only return prog_id
if flags is 0, but there are other XDP flags than the modes - e.g.,
XDP_FLAGS_UPDATE_IF_NOEXIST. Since the intention was only to look at
MODE flags, clear other ones before checking if flags is 0.
The WARN_ON is triggered in fib_select_default which is invoked when
there are multiple default routes. Update the function to use
fib_info_nhc and convert the nexthop checks to use fib_nh_common.
Add test case that covers the affected code path.
[0] https://github.com/FRRouting/frr/issues/6089
Fixes: 493ced1ac47c ("ipv4: Allow routes to use nexthop objects") Signed-off-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Paolo Abeni [Wed, 22 Apr 2020 16:24:56 +0000 (18:24 +0200)]
mptcp: fix data_fin handing in RX path
The data fin flag is set only via a DSS option, but
mptcp_incoming_options() copies it unconditionally from the
provided RX options.
Since we do not clear all the mptcp sock RX options in a
socket free/alloc cycle, we can end-up with a stray data_fin
value while parsing e.g. MPC packets.
That would lead to mapping data corruption and will trigger
a few WARN_ON() in the RX path.
Instead of adding a costly memset(), fetch the data_fin flag
only for DSS packets - when we always explicitly initialize
such bit at option parsing time.
Fixes: 648ef4b88673 ("mptcp: Implement MPTCP receive path") Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: David S. Miller <[email protected]>
David Ahern [Tue, 21 Apr 2020 23:48:27 +0000 (17:48 -0600)]
vrf: Fix IPv6 with qdisc and xfrm
When a qdisc is attached to the VRF device, the packet goes down the ndo
xmit function which is setup to send the packet back to the VRF driver
which does a lookup to send the packet out. The lookup in the VRF driver
is not considering xfrm policies. Change it to use ip6_dst_lookup_flow
rather than ip6_route_output.
Fixes: 35402e313663 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Documentation: add documentation of ping_group_range
Support for non-root users to send ICMP ECHO requests was added
back in Linux 3.0 kernel, but the documentation for the sysctl
to enable it has been missing.
David S. Miller [Thu, 23 Apr 2020 02:27:40 +0000 (19:27 -0700)]
Merge branch 'sctp-fixes'
Jere Leppänen says:
====================
sctp: Fix problems with peer restart when in SHUTDOWN-PENDING state and socket is closed
These patches are related to the scenario described in commit bdf6fa52f01b ("sctp: handle association restarts when the socket is
closed."). To recap, when our association is in SHUTDOWN-PENDING state
and we've closed our one-to-one socket, while the peer crashes without
being detected, restarts and reconnects using the same addresses and
ports, we start association shutdown.
In this case, Cumulative TSN Ack in the SHUTDOWN that we send has
always been incorrect. Additionally, bundling of the SHUTDOWN with the
COOKIE-ACK was broken by a later commit. This series fixes both of
these issues.
====================
sctp: Fix SHUTDOWN CTSN Ack in the peer restart case
When starting shutdown in sctp_sf_do_dupcook_a(), get the value for
SHUTDOWN Cumulative TSN Ack from the new association, which is
reconstructed from the cookie, instead of the old association, which
the peer doesn't have anymore.
Otherwise the SHUTDOWN is either ignored or replied to with an ABORT
by the peer because CTSN Ack doesn't match the peer's Initial TSN.
Fixes: bdf6fa52f01b ("sctp: handle association restarts when the socket is closed.") Signed-off-by: Jere Leppänen <[email protected]> Acked-by: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: David S. Miller <[email protected]>
When we start shutdown in sctp_sf_do_dupcook_a(), we want to bundle
the SHUTDOWN with the COOKIE-ACK to ensure that the peer receives them
at the same time and in the correct order. This bundling was broken by
commit 4ff40b86262b ("sctp: set chunk transport correctly when it's a
new asoc"), which assigns a transport for the COOKIE-ACK, but not for
the SHUTDOWN.
Fix this by passing a reference to the COOKIE-ACK chunk as an argument
to sctp_sf_do_9_2_start_shutdown() and onward to
sctp_make_shutdown(). This way the SHUTDOWN chunk is assigned the same
transport as the COOKIE-ACK chunk, which allows them to be bundled.
In sctp_sf_do_9_2_start_shutdown(), the void *arg parameter was
previously unused. Now that we're taking it into use, it must be a
valid pointer to a chunk, or NULL. There is only one call site where
it's not, in sctp_sf_autoclose_timer_expire(). Fix that too.
Fixes: 4ff40b86262b ("sctp: set chunk transport correctly when it's a new asoc") Signed-off-by: Jere Leppänen <[email protected]> Acked-by: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Vladimir Oltean [Tue, 21 Apr 2020 17:18:53 +0000 (20:18 +0300)]
net: dsa: don't fail to probe if we couldn't set the MTU
There is no reason to fail the probing of the switch if the MTU couldn't
be configured correctly (either the switch port itself, or the host
port) for whatever reason. MTU-sized traffic probably won't work, sure,
but we can still probably limp on and support some form of communication
anyway, which the users would probably appreciate more.
Eric Dumazet [Tue, 21 Apr 2020 17:00:28 +0000 (10:00 -0700)]
sched: etf: do not assume all sockets are full blown
skb->sk does not always point to a full blown socket,
we need to use sk_fullsock() before accessing fields which
only make sense on full socket.
BUG: KASAN: use-after-free in report_sock_error+0x286/0x300 net/sched/sch_etf.c:141
Read of size 1 at addr ffff88805eb9b245 by task syz-executor.5/9630
Fixes: 4b15c7075352 ("net/sched: Make etf report drops on error_queue") Fixes: 25db26a91364 ("net/sched: Introduce the ETF Qdisc") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Cc: Vinicius Costa Gomes <[email protected]> Reviewed-by: Vinicius Costa Gomes <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Jason Yan [Fri, 10 Apr 2020 07:33:12 +0000 (15:33 +0800)]
tracing: Convert local functions in tracing_map.c to static
Fix the following sparse warning:
kernel/trace/tracing_map.c:286:6: warning: symbol
'tracing_map_array_clear' was not declared. Should it be static?
kernel/trace/tracing_map.c:297:6: warning: symbol
'tracing_map_array_free' was not declared. Should it be static?
kernel/trace/tracing_map.c:319:26: warning: symbol
'tracing_map_array_alloc' was not declared. Should it be static?
Nikolay Borisov [Mon, 13 Apr 2020 15:32:46 +0000 (18:32 +0300)]
tracing: Remove DECLARE_TRACE_NOARGS
This macro was intentionally broken so that the kernel code is not
poluted with such noargs macro used simply as markers. This use case
can be satisfied by using dummy no inline functions. Just remove it.
arch: split MODULE_ARCH_VERMAGIC definitions out to <asm/vermagic.h>
As the bug report [1] pointed out, <linux/vermagic.h> must be included
after <linux/module.h>.
I believe we should not impose any include order restriction. We often
sort include directives alphabetically, but it is just coding style
convention. Technically, we can include header files in any order by
making every header self-contained.
Currently, arch-specific MODULE_ARCH_VERMAGIC is defined in
<asm/module.h>, which is not included from <linux/vermagic.h>.
Hence, the straight-forward fix-up would be as follows:
This works enough, but for further cleanups, I split MODULE_ARCH_VERMAGIC
definitions into <asm/vermagic.h>.
With this, <linux/module.h> and <linux/vermagic.h> will be orthogonal,
and the location of MODULE_ARCH_VERMAGIC definitions will be consistent.
For arc and ia64, MODULE_PROC_FAMILY is only used for defining
MODULE_ARCH_VERMAGIC. I squashed it.
For hexagon, nds32, and xtensa, I removed <asm/modules.h> entirely
because they contained nothing but MODULE_ARCH_VERMAGIC definition.
Kbuild will automatically generate <asm/modules.h> at build-time,
wrapping <asm-generic/module.h>.
kbuild: fix DT binding schema rule again to avoid needless rebuilds
Since commit 7a0496056064 ("kbuild: fix DT binding schema rule to detect
command line changes"), this rule is every time re-run even if you change
nothing.
cmd_dtc takes one additional parameter to pass to the -O option of dtc.
We need to pass 'yaml' to if_changed_rule. Otherwise, cmd-check invoked
from if_changed_rule is false positive.
Fixes: 7a0496056064 ("kbuild: fix DT binding schema rule to detect command line changes") Signed-off-by: Masahiro Yamada <[email protected]>
Paulo Alcantara [Mon, 20 Apr 2020 22:43:04 +0000 (19:43 -0300)]
cifs: ensure correct super block for DFS reconnect
This patch is basically fixing the lookup of tcons (DFS specific) during
reconnect (smb2pdu.c:__smb2_reconnect) to update their prefix paths.
Previously, we relied on the TCP_Server_Info pointer
(misc.c:tcp_super_cb) to determine which tcon to update the prefix path
We could not rely on TCP server pointer to determine which super block
to update the prefix path when reconnecting tcons since it might map
to different tcons that share same TCP connection.
Instead, walk through all cifs super blocks and compare their DFS full
paths with the tcon being updated to.
struct hist_field allocated through create_var() do not initialize
"ref" field to 1. The code in __destroy_hist_field() does not destroy
object if "ref" is initialized to zero, the condition
if (--hist_field->ref > 1) always passes since unsigned int wraps.
Paulo Alcantara [Mon, 20 Apr 2020 22:42:57 +0000 (19:42 -0300)]
cifs: do not share tcons with DFS
This disables tcon re-use for DFS shares.
tcon->dfs_path stores the path that the tcon should connect to when
doing failing over.
If that tcon is used multiple times e.g. 2 mounts using it with
different prefixpath, each will need a different dfs_path but there is
only one tcon. The other solution would be to split the tcon in 2
tcons during failover but that is much harder.
tcons could not be shared with DFS in cifs.ko because in a
DFS namespace like:
you can see that link and link2 are two DFS links that both resolve to
the same target share (/serverA/target1), so cifs.ko will only contain a
single tcon for both link and link2.
The problem with that is, if we (auto)mount "link" and "link2", cifs.ko
will only contain a single tcon for both DFS links so we couldn't
perform failover or refresh the DFS cache for both links because
tcon->dfs_path was set to either "link" or "link2", but not both --
which is wrong.
Sometimes, WARN_FUNC() and other users of symbol_by_offset() will
associate the first instruction of a symbol with the symbol preceding
it. This is because symbol->offset + symbol->len is already outside of
the symbol's range.
uclamp_fork() resets the uclamp values to their default when the
reset-on-fork flag is set. It also checks whether the task has a RT
policy, and sets its uclamp.min to 1024 accordingly. However, during
reset-on-fork, the task's policy is lowered to SCHED_NORMAL right after,
hence leading to an erroneous uclamp.min setting for the new task if it
was forked from RT.
Fix this by removing the unnecessary check on rt_task() in
uclamp_fork() as this doesn't make sense if the reset-on-fork flag is
set.
x86, sched: Don't enable static key when starting secondary CPUs
The static key arch_scale_freq_key only needs to be enabled once (at
boot). This change fixes a bug by which the key was enabled every time cpu0
is started, even as a secondary CPU during cpu hotplug. Secondary CPUs are
started from the idle thread: setting a static key from there means
acquiring a lock and may result in sleeping in the idle task, causing CPU
lockup.
Another consequence of this change is that init_counter_refs() is now
called on each CPU correctly; previously the function on_each_cpu() was
used, but it was called at boot when the only online cpu is cpu0.
x86, sched: Account for CPUs with less than 4 cores in freq. invariance
If a CPU has less than 4 physical cores, MSR_TURBO_RATIO_LIMIT will
rightfully report that the 4C turbo ratio is zero. In such cases, use the
1C turbo ratio instead for frequency invariance calculations.
x86, sched: Bail out of frequency invariance if base frequency is unknown
Some hypervisors such as VMWare ESXi 5.5 advertise support for
X86_FEATURE_APERFMPERF but then fill all MSR's with zeroes. In particular,
MSR_PLATFORM_INFO set to zero tricks the code that wants to know the base
clock frequency of the CPU (highest non-turbo frequency), producing a
division by zero when computing the ratio turbo_freq/base_freq necessary
for frequency invariant accounting.
It is to be noted that even if MSR_PLATFORM_INFO contained the appropriate
data, APERF and MPERF are constantly zero on ESXi 5.5, thus freq-invariance
couldn't be done in principle (not that it would make a lot of sense in a
VM anyway). The real problem is advertising X86_FEATURE_APERFMPERF. This
appears to be fixed in more recent versions: ESXi 6.7 doesn't advertise
that feature.
David Ahern [Tue, 21 Apr 2020 14:47:24 +0000 (08:47 -0600)]
selftests: Fix suppress test in fib_tests.sh
fib_tests is spewing errors:
...
Cannot open network namespace "ns1": No such file or directory
Cannot open network namespace "ns1": No such file or directory
Cannot open network namespace "ns1": No such file or directory
Cannot open network namespace "ns1": No such file or directory
ping: connect: Network is unreachable
Cannot open network namespace "ns1": No such file or directory
Cannot open network namespace "ns1": No such file or directory
...
Each test entry in fib_tests is supposed to do its own setup and
cleanup. Right now the $IP commands in fib_suppress_test are
failing because there is no ns1. Add the setup/cleanup and logging
expected for each test.
Fixes: ca7a03c41753 ("ipv6: do not free rt if FIB_LOOKUP_NOREF is set on suppress rule") Signed-off-by: David Ahern <[email protected]> Cc: Jason A. Donenfeld <[email protected]> Signed-off-by: David S. Miller <[email protected]>
David S. Miller [Wed, 22 Apr 2020 19:50:41 +0000 (12:50 -0700)]
Merge branch 'net-dsa-b53-Various-ARL-fixes'
Florian Fainelli says:
====================
net: dsa: b53: Various ARL fixes
This patch series fixes a number of short comings in the existing b53
driver ARL management logic in particular:
- we were not looking up the {MAC,VID} tuples against their VID, despite
having VLANs enabled
- the MDB entries (multicast) would lose their validity as soon as a
single port in the vector would leave the entry
- the ARL was currently under utilized because we would always place new
entries in bin index #1, instead of using all possible bins available,
thus reducing the ARL effective size by 50% or 75% depending on the
switch generation
- it was possible to overwrite the ARL entries because no proper space
verification was done
This patch series addresses all of these issues.
Changes in v2:
- added a new patch to correctly flip invidual VLAN learning vs. shared
VLAN learning depending on the global VLAN state
- added Andrew's R-b tags for patches which did not change
- corrected some verbosity and minor issues in patch #4 to match caller
expectations, also avoid a variable length DECLARE_BITMAP() call
====================
When asking the ARL to read a MAC address, we will get a number of bins
returned in a single read. Out of those bins, there can essentially be 3
states:
- all bins are full, we have no space left, and we can either replace an
existing address or return that full condition
- the MAC address was found, then we need to return its bin index and
modify that one, and only that one
- the MAC address was not found and we have a least one bin free, we use
that bin index location then
The code would unfortunately fail on all counts.
Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
The ARL {MAC,VID} tuple and the forward entry were off by 0x10 bytes,
which means that when we read/wrote from/to ARL bin index 0, we were
actually accessing the ARLA_RWCTRL register.
Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
When support for the MDB entries was added, the valid bit was correctly
changed to be assigned depending on the remaining port bitmask, that is,
if there were no more ports added to the entry's port bitmask, the entry
now becomes invalid. There was another assignment a few lines below that
would override this which would invalidate entries even when there were
still multiple ports left in the MDB entry.
Fixes: 5d65b64a3d97 ("net: dsa: b53: Add support for MDB") Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Harry Pan [Thu, 2 Apr 2020 11:07:09 +0000 (19:07 +0800)]
perf/x86/cstate: Add Jasper Lake CPU support
The Jasper Lake processor is Tremont microarchitecture, reuse the
glm_cstates table of Goldmont and Goldmont Plus to enable the C-states
residency profiling.
David S. Miller [Wed, 22 Apr 2020 19:32:11 +0000 (12:32 -0700)]
Merge branch 'vrf-looping'
David Ahern says:
====================
net: Fix looping with vrf, xfrms and qdisc on VRF
Trev reported that use of VRFs with xfrms is looping when a qdisc
is added to the VRF device. The combination of xfrm + qdisc is not
handled by the VRF driver which lost track that it has already
seen the packet.
The XFRM_TRANSFORMED flag is used by the netfilter code for a similar
purpose, so re-use for VRF. Patch 1 drops the #ifdef around setting
the flag in the xfrm output functions. Patch 2 adds a check to
the VRF driver for flag; if set the packet has already passed through
the VRF driver once and does not need to recirculated a second time.
This is a day 1 bug with VRFs; stable wise, I would only take this
back to 4.14. I have a set of test cases which I will submit to
net-next.
====================
David Ahern [Mon, 20 Apr 2020 23:13:52 +0000 (17:13 -0600)]
vrf: Check skb for XFRM_TRANSFORMED flag
To avoid a loop with qdiscs and xfrms, check if the skb has already gone
through the qdisc attached to the VRF device and then to the xfrm layer.
If so, no need for a second redirect.
David Ahern [Mon, 20 Apr 2020 23:13:51 +0000 (17:13 -0600)]
xfrm: Always set XFRM_TRANSFORMED in xfrm{4,6}_output_finish
IPSKB_XFRM_TRANSFORMED and IP6SKB_XFRM_TRANSFORMED are skb flags set by
xfrm code to tell other skb handlers that the packet has been passed
through the xfrm output functions. Simplify the code and just always
set them rather than conditionally based on netfilter enabled thus
making the flag available for other users.
net: phy: microchip_t1: add lan87xx_phy_init to initialize the lan87xx phy.
lan87xx_phy_init() initializes the lan87xx phy hardware
including its TC10 Wake-up and Sleep features.
Fixes: 3e50d2da5850 ("Add driver for Microchip LAN87XX T1 PHYs") Signed-off-by: Yuiko Oshino <[email protected]>
v0->v1:
- Add more details in the commit message and source comments.
- Update to the latest initialization sequences.
- Add access_ereg_modify_changed().
- Fix access_ereg() to access SMI bank correctly. Signed-off-by: David S. Miller <[email protected]>
Merge tag 'linux-kselftest-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"This consists of fixes to runner scripts and individual test run-time
bugs. Includes fixes to tpm2 and memfd test run-time regressions"
* tag 'linux-kselftest-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ipc: Fix test failure seen after initial test run
Revert "Kernel selftests: tpm2: check for tpm support"
selftests/ftrace: Add CONFIG_SAMPLE_FTRACE_DIRECT=m kconfig
selftests/seccomp: allow clock_nanosleep instead of nanosleep
kselftest/runner: allow to properly deliver signals to tests
selftests/harness: fix spelling mistake "SIGARLM" -> "SIGALRM"
selftests: Fix memfd test run-time regression
selftests: vm: Fix 64-bit test builds for powerpc64le
selftests: vm: Do not override definition of ARCH
usb: typec: altmode: Fix typec_altmode_get_partner sometimes returning an invalid pointer
Before this commit, typec_altmode_get_partner would return a
const struct typec_altmode * pointing to address 0x08 when
to_altmode(adev)->partner was NULL.
Add a check for to_altmode(adev)->partner being NULL to fix this.
with the introduction of CPU directed interrupts the kernel
parameter pci=force_floating was introduced to fall back
to the previous behavior using floating irqs.
However we were still setting the affinity in that case,
both in __irq_alloc_descs() and via the irq_set_affinity
callback in struct irq_chip.
For the former only set the affinity in the directed case.
The latter is explicitly set in zpci_directed_irq_init()
so we can just leave it unset for the floating case.
Fixes: e979ce7bced2 ("s390/pci: provide support for CPU directed interrupts") Co-developed-by: Alexander Schmidt <[email protected]> Signed-off-by: Alexander Schmidt <[email protected]> Signed-off-by: Niklas Schnelle <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
Philipp Rudo [Mon, 6 Apr 2020 12:47:48 +0000 (14:47 +0200)]
s390/ftrace: fix potential crashes when switching tracers
Switching tracers include instruction patching. To prevent that a
instruction is patched while it's read the instruction patching is done
in stop_machine 'context'. This also means that any function called
during stop_machine must not be traced. Thus add 'notrace' to all
functions called within stop_machine.
Fixes: 1ec2772e0c3c ("s390/diag: add a statistic for diagnose calls") Fixes: 38f2c691a4b3 ("s390: improve wait logic of stop_machine") Fixes: 4ecf0a43e729 ("processor: get rid of cpu_relax_yield") Signed-off-by: Philipp Rudo <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
It turned out that ALC1220-VB USB-audio device gives the interrupt
event to some PCM terminals while those don't allow the connector
state request but only the actual I/O terminals return the request.
The recent commit 7dc3c5a0172e ("ALSA: usb-audio: Don't create jack
controls for PCM terminals") excluded those phantom terminals, so
those events are ignored, too.
My first thought was that this could be easily deduced from the
associated terminals, but some of them have even no associate terminal
ID, hence it's not too trivial to figure out.
Since the number of such terminals are small and limited, this patch
implements another quirk table for the simple mapping of the
connectors. It's not really scalable, but let's hope that there will
be not many such funky devices in future.
Eric Sandeen [Tue, 21 Apr 2020 02:13:10 +0000 (11:13 +0900)]
exfat: truncate atimes to 2s granularity
The timestamp for access_time has double seconds granularity(There is no
10msIncrement field for access_time unlike create/modify_time).
exfat's atimes are restricted to only 2s granularity so after
we set an atime, round it down to the nearest 2s and set the
sub-second component of the timestamp to 0.
Eric Sandeen [Fri, 17 Apr 2020 05:43:49 +0000 (14:43 +0900)]
exfat: properly set s_time_gran
The s_time_gran superblock field indicates the on-disk nanosecond
granularity of timestamps, and for exfat that seems to be 10ms, so
set s_time_gran to 10000000ns. Without this, in-memory timestamps
change when they get re-read from disk.
Unify access to boot sector via 'sbi->pbr_bh'.
This fixes vol_flags inconsistency at read failed in fs_set_vol_flags(),
and buffer_head leak in __exfat_fill_super().
This patch is to enable Intel SERDES power up/down sequence. The SERDES
converts 8/10 bits data to SGMII signal. Below is an example of
HW configuration for SGMII mode. The SERDES is located in the PHY IF
in the diagram below.
PHY IF configuration and status registers are accessible through
mdio address 0x15 which is defined as mdio_adhoc_addr. During D0,
The driver will need to power up PHY IF by changing the power state
to P0. Likewise, for D3, the driver sets PHY IF power state to P3.
net: broadcom: convert to devm_platform_ioremap_resource_byname()
Use the function devm_platform_ioremap_resource_byname() to simplify
source code which calls the functions platform_get_resource_byname()
and devm_ioremap_resource(). Remove also a few error messages which
became unnecessary with this software refactoring.
macvlan: fix null dereference in macvlan_device_event()
In the macvlan_device_event(), the list_first_entry_or_null() is used.
This function could return null pointer if there is no node.
But, the macvlan module doesn't check the null pointer.
So, null-ptr-deref would occur.
The problem scenario.
If dummy1 is removed,
1. ->dellink() of dummy1 is called.
2. NETDEV_UNREGISTER of dummy1 notification is sent to macvlan module.
3. ->dellink() of macvlan1 is called.
4. NETDEV_UNREGISTER of macvlan1 notification is sent to bond module.
5. __bond_release_one() is called and it internally calls
dev_set_mac_address().
6. dev_set_mac_address() calls the ->ndo_set_mac_address() of macvlan1,
which is macvlan_set_mac_address().
7. macvlan_set_mac_address() calls the dev_set_mac_address() with dummy1.
8. NETDEV_CHANGEADDR of dummy1 is sent to macvlan module.
9. In the macvlan_device_event(), it calls list_first_entry_or_null().
At this point, dummy1 and macvlan1 were removed.
So, list_first_entry_or_null() will return NULL.
Test commands:
ip netns add nst
ip netns exec nst ip link add bond0 type bond
for i in {0..10}
do
ip netns exec nst ip link add dummy$i type dummy
ip netns exec nst ip link add macvlan$i link dummy$i \
type macvlan mode passthru
ip netns exec nst ip link set macvlan$i master bond0
done
ip netns del nst
Fixes: e289fd28176b ("macvlan: fix the problem when mac address changes for passthru mode") Reported-by: [email protected] Signed-off-by: Taehee Yoo <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Jason Yan [Mon, 20 Apr 2020 12:34:48 +0000 (20:34 +0800)]
i40e: Remove unneeded conversion to bool
The '==' expression itself is bool, no need to convert it to bool again.
This fixes the following coccicheck warning:
drivers/net/ethernet/intel/i40e/i40e_main.c:1614:52-57: WARNING:
conversion to bool not needed here
drivers/net/ethernet/intel/i40e/i40e_main.c:11439:52-57: WARNING:
conversion to bool not needed here
Jason Yan [Mon, 20 Apr 2020 12:34:31 +0000 (20:34 +0800)]
ptp: Remove unneeded conversion to bool
The '==' expression itself is bool, no need to convert it to bool again.
This fixes the following coccicheck warning:
drivers/ptp/ptp_ines.c:403:55-60: WARNING: conversion to bool not
needed here
drivers/ptp/ptp_ines.c:404:55-60: WARNING: conversion to bool not
needed here
Commit 018d26fcd12a ("cgroup, netclassid: periodically release file_lock
on classid") added a second cond_resched to write_classid indirectly by
update_classid_task. Remove the one in write_classid.
* emailed patches from Andrew Morton <[email protected]>:
tools/vm: fix cross-compile build
coredump: fix null pointer dereference on coredump
mm: shmem: disable interrupt when acquiring info->lock in userfaultfd_copy path
shmem: fix possible deadlocks on shmlock_user_lock
vmalloc: fix remap_vmalloc_range() bounds checks
mm/shmem: fix build without THP
mm/ksm: fix NULL pointer dereference when KSM zero page is enabled
tools/build: tweak unused value workaround
checkpatch: fix a typo in the regex for $allocFunctions
mm, gup: return EINTR when gup is interrupted by fatal signals
mm/hugetlb: fix a addressing exception caused by huge_pte_offset
MAINTAINERS: add an entry for kfifo
mm/userfaultfd: disable userfaultfd-wp on x86_32
slub: avoid redzone when choosing freepointer location
sh: fix build error in mm/init.c
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Bugfixes, and a few cleanups to the newly-introduced assembly language
vmentry code for AMD"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: PPC: Book3S HV: Handle non-present PTEs in page fault functions
kvm: Disable objtool frame pointer checking for vmenter.S
MAINTAINERS: add a reviewer for KVM/s390
KVM: s390: Fix PV check in deliverable_irqs()
kvm: Handle reads of SandyBridge RAPL PMU MSRs rather than injecting #GP
KVM: Remove CREATE_IRQCHIP/SET_PIT2 race
KVM: SVM: Fix __svm_vcpu_run declaration.
KVM: SVM: Do not setup frame pointer in __svm_vcpu_run
KVM: SVM: Fix build error due to missing release_pages() include
KVM: SVM: Do not mark svm_vcpu_run with STACK_FRAME_NON_STANDARD
kvm: nVMX: match comment with return type for nested_vmx_exit_reflected
kvm: nVMX: reflect MTF VM-exits if injected by L1
KVM: s390: Return last valid slot if approx index is out-of-bounds
KVM: Check validity of resolved slot when searching memslots
KVM: VMX: Enable machine check support for 32bit targets
KVM: SVM: move more vmentry code to assembly
KVM: SVM: fix compilation with modular PSP and non-modular KVM
Merge tag 'asoc-fix-v5.7-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.7
Quite a lot of fixes here, a lot of driver specific ones but the biggest
one is the revert of changes to the startup and shutdown sequence for
DAIs that went in during the merge window - they broke some older x86
platforms and attempts to fix them didn't succeed so it's safer to just
roll them back and try to make sure those platforms are handled properly
in any future attempt.
The rockchip S/PDIF DT stuff was IIRC for validation issues.
Alexander Tsoy [Tue, 21 Apr 2020 19:09:08 +0000 (22:09 +0300)]
ALSA: usb-audio: Apply async workaround for Scarlett 2i4 2nd gen
Due to rounding error driver sometimes incorrectly calculate next packet
size, which results in audible clicks on devices with synchronous playback
endpoints. For example on a high speed bus and a sample rate 44.1 kHz it
loses one sample every ~40.9 seconds. Fortunately playback interface on
Scarlett 2i4 2nd gen has a working explicit feedback endpoint, so we can
switch playback data endpoint to asynchronous mode as a workaround.
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes and cleanups from Michael Tsirkin:
- Some bug fixes
- Cleanup a couple of issues that surfaced meanwhile
- Disable vhost on ARM with OABI for now - to be fixed fully later in
the cycle or in the next release.
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (24 commits)
vhost: disable for OABI
virtio: drop vringh.h dependency
virtio_blk: add a missing include
virtio-balloon: Avoid using the word 'report' when referring to free page hinting
virtio-balloon: make virtballoon_free_page_report() static
vdpa: fix comment of vdpa_register_device()
vdpa: make vhost, virtio depend on menu
vdpa: allow a 32 bit vq alignment
drm/virtio: fix up for include file changes
remoteproc: pull in slab.h
rpmsg: pull in slab.h
virtio_input: pull in slab.h
remoteproc: pull in slab.h
virtio-rng: pull in slab.h
virtgpu: pull in uaccess.h
tools/virtio: make asm/barrier.h self contained
tools/virtio: define aligned attribute
virtio/test: fix up after IOTLB changes
vhost: Create accessors for virtqueues private_data
vdpasim: Return status in vdpasim_get_status
...
Merge tag 'tpmdd-next-20200421' of git://git.infradead.org/users/jjs/linux-tpmdd
Pull tpm fixes from Jarkko Sakkinen:
"A few bug fixes"
* tag 'tpmdd-next-20200421' of git://git.infradead.org/users/jjs/linux-tpmdd:
tpm/tpm_tis: Free IRQ if probing fails
tpm: fix wrong return value in tpm_pcr_extend
tpm: ibmvtpm: retry on H_CLOSED in tpm_ibmvtpm_send()
tpm: Export tpm2_get_cc_attrs_tbl for ibmvtpm driver as module
Merge tag 'clang-format-for-linus-v5.7-rc3' of git://github.com/ojeda/linux
Pull clang-format fixlets from Miguel Ojeda:
"Two trivial clang-format changes:
- Don't indent C++ namespaces (Ian Rogers)
- The usual clang-format macro list update (Miguel Ojeda)"
* tag 'clang-format-for-linus-v5.7-rc3' of git://github.com/ojeda/linux:
clang-format: Update with the latest for_each macro list
clang-format: don't indent namespaces
Lucas Stach [Tue, 21 Apr 2020 01:14:23 +0000 (18:14 -0700)]
tools/vm: fix cross-compile build
Commit 7ed1c1901fe5 ("tools: fix cross-compile var clobbering") moved
the setup of the CC variable to tools/scripts/Makefile.include to make
the behavior consistent across all the tools Makefiles.
As the vm tools missed the include we end up with the wrong CC in a
cross-compiling evironment.
projects / linux.git / log