Steve Wahl [Fri, 19 May 2023 16:04:20 +0000 (11:04 -0500)]
platform/x86: ISST: Remove 8 socket limit
Stop restricting the PCI search to a range of PCI domains fed to
pci_get_domain_bus_and_slot(). Instead, use for_each_pci_dev() and
look at all PCI domains in one pass.
On systems with more than 8 sockets, this avoids error messages like
"Information: Invalid level, Can't get TDP control information at
specified levels on cpu 480" from the intel speed select utility.
Jingbo Xu [Mon, 15 May 2023 10:39:41 +0000 (18:39 +0800)]
erofs: fix null-ptr-deref caused by erofs_xattr_prefixes_init
Fragments and dedupe share one feature bit, and thus packed inode may not
exist when fragment feature bit (dedupe feature bit exactly) is set, e.g.
when deduplication feature is in use while fragments feature is not. In
this case, sbi->packed_inode could be NULL while fragments feature bit
is set.
Fix this by accessing packed inode only when it exists.
After the cited patch, mlx5_irq xarray index can be different then
mlx5_irq MSIX table index.
Fix it by storing both mlx5_irq xarray index and MSIX table index.
The cited patch deny the user of changing the affinity of mlx5 irqs,
which break backward compatibility.
Hence, allow the user to change the affinity of mlx5 irqs.
Whenever a shutdown is invoked, free irqs only and keep mlx5_irq
synthetic wrapper intact in order to avoid use-after-free on
system shutdown.
for example:
==================================================================
BUG: KASAN: use-after-free in _find_first_bit+0x66/0x80
Read of size 8 at addr ffff88823fc0d318 by task kworker/u192:0/13608
The buggy address belongs to the object at ffff88823fc0d300
which belongs to the cache kmalloc-192 of size 192
The buggy address is located 24 bytes inside of
192-byte region [ffff88823fc0d300, ffff88823fc0d3c0)
Shay Drory [Tue, 2 May 2023 10:36:42 +0000 (13:36 +0300)]
net/mlx5: Devcom, serialize devcom registration
From one hand, mlx5 driver is allowing to probe PFs in parallel.
From the other hand, devcom, which is a share resource between PFs, is
registered without any lock. This might resulted in memory problems.
Hence, use the global mlx5_dev_list_lock in order to serialize devcom
registration.
Shay Drory [Tue, 2 May 2023 10:35:11 +0000 (13:35 +0300)]
net/mlx5: Devcom, fix error flow in mlx5_devcom_register_device
In case devcom allocation is failed, mlx5 is always freeing the priv.
However, this priv might have been allocated by a different thread,
and freeing it might lead to use-after-free bugs.
Fix it by freeing the priv only in case it was allocated by the
running thread.
Shay Drory [Mon, 6 Feb 2023 09:52:02 +0000 (11:52 +0200)]
net/mlx5: E-switch, Devcom, sync devcom events and devcom comp register
devcom events are sent to all registered component. Following the
cited patch, it is possible for two components, e.g.: two eswitches,
to send devcom events, while both components are registered. This
means eswitch layer will do double un/pairing, which is double
allocation and free of resources, even though only one un/pairing is
needed. flow example:
[ 826.534521] The buggy address belongs to the object at ffff888194485800
which belongs to the cache kmalloc-512 of size 512
[ 826.535506] The buggy address is located 48 bytes inside of
freed 512-byte region [ffff888194485800, ffff888194485a00)
[ 826.541095] Memory state around the buggy address:
[ 826.541519] ffff888194485700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 826.542149] ffff888194485780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 826.542773] >ffff888194485800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 826.543400] ^
[ 826.543822] ffff888194485880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 826.544452] ffff888194485900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 826.545079] ==================================================================
Fixes: 6702782845a5 ("net/mlx5e: TC, Set CT miss to the specific ct action instance") Signed-off-by: Paul Blakey <[email protected]> Reviewed-by: Vlad Buslov <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
Rahul Rameshbabu [Wed, 22 Feb 2023 00:18:48 +0000 (16:18 -0800)]
net/mlx5e: Fix SQ wake logic in ptp napi_poll context
Check in the mlx5e_ptp_poll_ts_cq context if the ptp tx sq should be woken
up. Before change, the ptp tx sq may never wake up if the ptp tx ts skb
fifo is full when mlx5e_poll_tx_cq checks if the queue should be woken up.
Vlad Buslov [Fri, 31 Mar 2023 12:20:51 +0000 (14:20 +0200)]
net/mlx5e: Fix deadlock in tc route query code
Cited commit causes ABBA deadlock[0] when peer flows are created while
holding the devcom rw semaphore. Due to peer flows offload implementation
the lock is taken much higher up the call chain and there is no obvious way
to easily fix the deadlock. Instead, since tc route query code needs the
peer eswitch structure only to perform a lookup in xarray and doesn't
perform any sleeping operations with it, refactor the code for lockless
execution in following ways:
- RCUify the devcom 'data' pointer. When resetting the pointer
synchronously wait for RCU grace period before returning. This is fine
since devcom is currently only used for synchronization of
pairing/unpairing of eswitches which is rare and already expensive as-is.
- Wrap all usages of 'paired' boolean in {READ|WRITE}_ONCE(). The flag has
already been used in some unlocked contexts without proper
annotations (e.g. users of mlx5_devcom_is_paired() function), but it wasn't
an issue since all relevant code paths checked it again after obtaining the
devcom semaphore. Now it is also used by mlx5_devcom_get_peer_data_rcu() as
"best effort" check to return NULL when devcom is being unpaired. Note that
while RCU read lock doesn't prevent the unpaired flag from being changed
concurrently it still guarantees that reader can continue to use 'data'.
- Refactor mlx5e_tc_query_route_vport() function to use new
mlx5_devcom_get_peer_data_rcu() API which fixes the deadlock.
[0]:
[ 164.599612] ======================================================
[ 164.600142] WARNING: possible circular locking dependency detected
[ 164.600667] 6.3.0-rc3+ #1 Not tainted
[ 164.601021] ------------------------------------------------------
[ 164.601557] handler1/3456 is trying to acquire lock:
[ 164.601998] ffff88811f1714b0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}, at: mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core]
[ 164.603078]
but task is already holding lock:
[ 164.603617] ffff88810137fc98 (&comp->sem){++++}-{3:3}, at: mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core]
[ 164.604459]
which lock already depends on the new lock.
net/mlx5e: Use correct encap attribute during invalidation
With introduction of post action infrastructure most of the users of encap
attribute had been modified in order to obtain the correct attribute by
calling mlx5e_tc_get_encap_attr() helper instead of assuming encap action
is always on default attribute. However, the cited commit didn't modify
mlx5e_invalidate_encap() which prevents it from destroying correct modify
header action which leads to a warning [0]. Fix the issue by using correct
attribute.
[0]:
Feb 21 09:47:35 c-237-177-40-045 kernel: WARNING: CPU: 17 PID: 654 at drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:684 mlx5e_tc_attach_mod_hdr+0x1cc/0x230 [mlx5_core]
Feb 21 09:47:35 c-237-177-40-045 kernel: RIP: 0010:mlx5e_tc_attach_mod_hdr+0x1cc/0x230 [mlx5_core]
Feb 21 09:47:35 c-237-177-40-045 kernel: Call Trace:
Feb 21 09:47:35 c-237-177-40-045 kernel: <TASK>
Feb 21 09:47:35 c-237-177-40-045 kernel: mlx5e_tc_fib_event_work+0x8e3/0x1f60 [mlx5_core]
Feb 21 09:47:35 c-237-177-40-045 kernel: ? mlx5e_take_all_encap_flows+0xe0/0xe0 [mlx5_core]
Feb 21 09:47:35 c-237-177-40-045 kernel: ? lock_downgrade+0x6d0/0x6d0
Feb 21 09:47:35 c-237-177-40-045 kernel: ? lockdep_hardirqs_on_prepare+0x273/0x3f0
Feb 21 09:47:35 c-237-177-40-045 kernel: ? lockdep_hardirqs_on_prepare+0x273/0x3f0
Feb 21 09:47:35 c-237-177-40-045 kernel: process_one_work+0x7c2/0x1310
Feb 21 09:47:35 c-237-177-40-045 kernel: ? lockdep_hardirqs_on_prepare+0x3f0/0x3f0
Feb 21 09:47:35 c-237-177-40-045 kernel: ? pwq_dec_nr_in_flight+0x230/0x230
Feb 21 09:47:35 c-237-177-40-045 kernel: ? rwlock_bug.part.0+0x90/0x90
Feb 21 09:47:35 c-237-177-40-045 kernel: worker_thread+0x59d/0xec0
Feb 21 09:47:35 c-237-177-40-045 kernel: ? __kthread_parkme+0xd9/0x1d0
net/mlx5: DR, Check force-loopback RC QP capability independently from RoCE
SW Steering uses RC QP for writing STEs to ICM. This writingis done in LB
(loopback), and FL (force-loopback) QP is preferred for performance. FL is
available when RoCE is enabled or disabled based on RoCE caps.
This patch adds reading of FL capability from HCA caps in addition to the
existing reading from RoCE caps, thus fixing the case where we didn't
have loopback enabled when RoCE was disabled.
Erez Shitrit [Thu, 9 Mar 2023 14:43:15 +0000 (16:43 +0200)]
net/mlx5: DR, Fix crc32 calculation to work on big-endian (BE) CPUs
When calculating crc for hash index we use the function crc32 that
calculates for little-endian (LE) arch.
Then we convert it to network endianness using htonl(), but it's wrong
to do the conversion in BE archs since the crc32 value is already LE.
The solution is to switch the bytes from the crc result for all types
of arc.
Fixes: 40416d8ede65 ("net/mlx5: DR, Replace CRC32 implementation to use kernel lib") Signed-off-by: Erez Shitrit <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
Shay Drory [Mon, 20 Mar 2023 11:07:53 +0000 (13:07 +0200)]
net/mlx5: Handle pairing of E-switch via uplink un/load APIs
In case user switch a device from switchdev mode to legacy mode, mlx5
first unpair the E-switch and afterwards unload the uplink vport.
From the other hand, in case user remove or reload a device, mlx5
first unload the uplink vport and afterwards unpair the E-switch.
The latter is causing a bug[1], hence, handle pairing of E-switch as
part of uplink un/load APIs.
[1]
In case VF_LAG is used, every tc fdb flow is duplicated to the peer
esw. However, the original esw keeps a pointer to this duplicated
flow, not the peer esw.
e.g.: if user create tc fdb flow over esw0, the flow is duplicated
over esw1, in FW/HW, but in SW, esw0 keeps a pointer to the duplicated
flow.
During module unload while a peer tc fdb flow is still offloaded, in
case the first device to be removed is the peer device (esw1 in the
example above), the peer net-dev is destroyed, and so the mlx5e_priv
is memset to 0.
Afterwards, the peer device is trying to unpair himself from the
original device (esw0 in the example above). Unpair API invoke the
original device to clear peer flow from its eswitch (esw0), but the
peer flow, which is stored over the original eswitch (esw0), is
trying to use the peer mlx5e_priv, which is memset to 0 and result in
bellow kernel-oops.
Shay Drory [Tue, 2 May 2023 08:03:53 +0000 (11:03 +0300)]
net/mlx5: Collect command failures data only for known commands
DEVX can issue a general command, which is not used by mlx5 driver.
In case such command is failed, mlx5 is trying to collect the failure
data, However, mlx5 doesn't create a storage for this command, since
mlx5 doesn't use it. This lead to array-index-out-of-bounds error.
Fix it by checking whether the command is known before collecting the
failure data.
Fixes: 34f46ae0d4b3 ("net/mlx5: Add command failures data to debugfs") Signed-off-by: Shay Drory <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
sock_alloc_file() calls release_sock() on error but the left hand
side of the assignment dereferences "sock". This isn't the bug and
I didn't report this earlier because there is an assert that it
doesn't fail.
Chuck Lever [Fri, 19 May 2023 17:12:50 +0000 (13:12 -0400)]
net/handshake: Squelch allocation warning during Kunit test
The "handshake_req_alloc excessive privsize" kunit test is intended
to check what happens when the maximum privsize is exceeded. The
WARN_ON_ONCE_GFP at mm/page_alloc.c:4744 can be disabled safely for
this test.
Linus Torvalds [Mon, 22 May 2023 23:31:28 +0000 (16:31 -0700)]
Merge tag 'x86_urgent_for_6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Dave Hansen:
"This works around and issue where the INVLPG instruction may miss
invalidating kernel TLB entries in recent hybrid CPUs.
I do expect an eventual microcode fix for this. When the microcode
version numbers are known, we can circle back around and add them the
model table to disable this workaround"
* tag 'x86_urgent_for_6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Avoid incomplete Global INVLPG flushes
Linus Torvalds [Mon, 22 May 2023 22:35:53 +0000 (15:35 -0700)]
Merge tag 'modules-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module fix from Luis Chamberlain:
"Only one fix has trickled through. Harshit Mogalapalli found a
use-after-free bug through static analysis with smatch"
* tag 'modules-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: Fix use-after-free bug in read_file_mod_stats()
Linus Torvalds [Mon, 22 May 2023 19:01:13 +0000 (12:01 -0700)]
Merge tag 'nfs-for-6.4-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
"Stable Fix:
- Don't change task->tk_status after the call to rpc_exit_task
Other Bugfixes:
- Convert kmap_atomic() to kmap_local_folio()
- Fix a potential double free with READ_PLUS"
* tag 'nfs-for-6.4-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFSv4.2: Fix a potential double free with READ_PLUS
SUNRPC: Don't change task->tk_status after the call to rpc_exit_task
NFS: Convert kmap_atomic() to kmap_local_folio()
Anton Protopopov [Mon, 22 May 2023 15:45:58 +0000 (15:45 +0000)]
bpf: fix a memory leak in the LRU and LRU_PERCPU hash maps
The LRU and LRU_PERCPU maps allocate a new element on update before locking the
target hash table bucket. Right after that the maps try to lock the bucket.
If this fails, then maps return -EBUSY to the caller without releasing the
allocated element. This makes the element untracked: it doesn't belong to
either of free lists, and it doesn't belong to the hash table, so can't be
re-used; this eventually leads to the permanent -ENOMEM on LRU map updates,
which is unexpected. Fix this by returning the element to the local free list
if bucket locking fails.
Takashi Iwai [Thu, 18 May 2023 11:35:20 +0000 (13:35 +0200)]
ALSA: hda: Fix unhandled register update during auto-suspend period
It's reported that the recording started right after the driver probe
doesn't work properly, and it turned out that this is related with the
codec auto-suspend. Namely, after the probe phase, the usage count
goes zero, and the auto-suspend is programmed, but the codec is kept
still active until the auto-suspend expiration. When an application
(e.g. alsactl) updates the mixer values at this moment, the values are
cached but not actually written. Then, starting arecord thereafter
also results in the silence because of the missing unmute.
The root cause is the handling of "lazy update" mode; when a mixer
value is updated *after* the suspend, it should update only the cache
and exits. At the resume, the cached value is written to the device,
in turn. The problem is that the current code misinterprets the state
of auto-suspend as if it were already suspended.
Although we can add the check of the actual device state after
pm_runtime_get_if_in_use() for catching the missing state, this won't
suffice; the second call of regmap_update_bits_check() will skip
writing the register because the cache has been already updated by the
first call. So we'd need fixes in two different places.
OTOH, a simpler fix is to replace pm_runtime_get_if_in_use() with
pm_runtime_get_if_active() (with ign_usage_count=true). This change
implies that the driver takes the pm refcount if the device is still
in ACTIVE state and continues the processing. A small caveat is that
this will leave the auto-suspend timer. But, since the timer callback
itself checks the device state and aborts gracefully when it's active,
this won't be any substantial problem.
Long story short: we address the missing register-write problem just
by replacing the pm_runtime_*() call in snd_hda_keep_power_up().
Finn Thain [Sat, 6 May 2023 09:38:12 +0000 (19:38 +1000)]
m68k: Move signal frame following exception on 68020/030
On 68030/020, an instruction such as, moveml %a2-%a3/%a5,%sp@- may cause
a stack page fault during instruction execution (i.e. not at an
instruction boundary) and produce a format 0xB exception frame.
In this situation, the value of USP will be unreliable. If a signal is
to be delivered following the exception, this USP value is used to
calculate the location for a signal frame. This can result in a
corrupted user stack.
The corruption was detected in dash (actually in glibc) where it showed
up as an intermittent "stack smashing detected" message and crash
following signal delivery for SIGCHLD.
It was hard to reproduce that failure because delivery of the signal
raced with the page fault and because the kernel places an unpredictable
gap of up to 7 bytes between the USP and the signal frame.
A format 0xB exception frame can be produced by a bus error or an
address error. The 68030 Users Manual says that address errors occur
immediately upon detection during instruction prefetch. The instruction
pipeline allows prefetch to overlap with other instructions, which means
an address error can arise during the execution of a different
instruction. So it seems likely that this patch may help in the address
error case also.
Charles Keepax [Thu, 18 May 2023 09:39:26 +0000 (10:39 +0100)]
spi: spi-cadence: Interleave write of TX and read of RX FIFO
When working in slave mode it seems the timing is exceedingly tight.
The TX FIFO can never empty, because the master is driving the clock so
zeros would be sent for those bytes where the FIFO is empty.
Return to interleaving the writing of the TX FIFO and the reading
of the RX FIFO to try to ensure the data is available when required.
All IPCs using instance_id use 8 bit value. Original commit used 16 bit
value because FW reports possible max value in 16 bit field, but in
practice FW limits the value to 8 bits.
Cezary Rojewski [Fri, 19 May 2023 20:17:09 +0000 (22:17 +0200)]
ASoC: Intel: avs: Account for UID of ACPI device
Configurations with multiple codecs attached to the platform are
supported but only if each from the set is different. Add new field
representing the 'Unique ID' so that codecs that share Vendor and Part
IDs can be differentiated and thus enabling support for such
configurations.
When changing value of kcontrol, FW module to which data should be send
needs to be found. Currently it is done in improper way, fix it. Change
function name to indicate that it looks only for volume module.
This allows to change volume during runtime, instead of only changing
init value.
Xin Long [Thu, 18 May 2023 20:03:00 +0000 (16:03 -0400)]
sctp: fix an issue that plpmtu can never go to complete state
When doing plpmtu probe, the probe size is growing every time when it
receives the ACK during the Search state until the probe fails. When
the failure occurs, pl.probe_high is set and it goes to the Complete
state.
However, if the link pmtu is huge, like 65535 in loopback_dev, the probe
eventually keeps using SCTP_MAX_PLPMTU as the probe size and never fails.
Because of that, pl.probe_high can not be set, and the plpmtu probe can
never go to the Complete state.
Fix it by setting pl.probe_high to SCTP_MAX_PLPMTU when the probe size
grows to SCTP_MAX_PLPMTU in sctp_transport_pl_recv(). Also, not allow
the probe size greater than SCTP_MAX_PLPMTU in the Complete state.
Fixes: b87641aff9e7 ("sctp: do state transition when a probe succeeds on HB ACK recv path") Signed-off-by: Xin Long <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Linus Torvalds [Sun, 21 May 2023 20:58:37 +0000 (13:58 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Plug a race in the stage-2 mapping code where the IPA and the PA
would end up being out of sync
- Make better use of the bitmap API (bitmap_zero, bitmap_zalloc...)
- FP/SVE/SME documentation update, in the hope that this field
becomes clearer...
- Add workaround for Apple SEIS brokenness to a new SoC
- Random comment fixes
x86:
- add MSR_IA32_TSX_CTRL into msrs_to_save
- fixes for XCR0 handling in SGX enclaves
Generic:
- Fix vcpu_array[0] races
- Fix race between starting a VM and 'reboot -f'"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: VMX: add MSR_IA32_TSX_CTRL into msrs_to_save
KVM: x86: Don't adjust guest's CPUID.0x12.1 (allowed SGX enclave XFRM)
KVM: VMX: Don't rely _only_ on CPUID to enforce XCR0 restrictions for ECREATE
KVM: Fix vcpu_array[0] races
KVM: VMX: Fix header file dependency of asm/vmx.h
KVM: Don't enable hardware after a restart/shutdown is initiated
KVM: Use syscore_ops instead of reboot_notifier to hook restart/shutdown
KVM: arm64: vgic: Add Apple M2 PRO/MAX cpus to the list of broken SEIS implementations
KVM: arm64: Clarify host SME state management
KVM: arm64: Restructure check for SVE support in FP trap handler
KVM: arm64: Document check for TIF_FOREIGN_FPSTATE
KVM: arm64: Fix repeated words in comments
KVM: arm64: Constify start/end/phys fields of the pgtable walker data
KVM: arm64: Infer PA offset from VA in hyp map walker
KVM: arm64: Infer the PA offset from IPA in stage-2 map walker
KVM: arm64: Use the bitmap API to allocate bitmaps
KVM: arm64: Slightly optimize flush_context()
* tag 'perf-tools-fixes-for-v6.4-1-2023-05-20' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (33 commits)
perf bench syscall: Fix __NR_execve undeclared build error
perf test attr: Fix python SafeConfigParser() deprecation warning
perf test attr: Update no event/metric expectations
tools headers disabled-features: Sync with the kernel sources
tools headers UAPI: Sync arch prctl headers with the kernel sources
tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench'
tools headers x86 cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync s390 syscall table file that wires up the memfd_secret syscall
tools headers UAPI: Sync linux/prctl.h with the kernel sources
perf metrics: Avoid segv with --topdown for metrics without a group
perf lock contention: Add empty 'struct rq' to satisfy libbpf 'runqueue' type verification
perf cs-etm: Fix contextid validation
perf arm64: Fix build with refcount checking
perf test: Add stat test for record and script
perf script: Skip aggregation for stat events
perf build: Add system include paths to BPF builds
perf bpf skels: Make vmlinux.h use bpf.h and perf_event.h in source directory
perf parse-events: Do not break up AUX event group
perf test test_intel_pt.sh: Test sample mode with event with PMU name
perf evsel: Modify group pmu name for software events
...
Linus Torvalds [Sun, 21 May 2023 18:53:52 +0000 (11:53 -0700)]
Merge tag 'powerpc-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix broken soft dirty tracking when using the Radix MMU (>= P9)
- Fix ISA mapping when "ranges" property is not present, for PASemi
Nemo boards
- Fix a possible WARN_ON_ONCE hitting in BPF extable handling
- Fix incorrect DMA address handling when using 2MB TCEs
- Fix a bug in IOMMU table handling for SR-IOV devices
- Fix the recent rework of IOMMU handling which left arch code calling
clean up routines that are handled by the IOMMU core
- A few assorted build fixes
Thanks to Christian Zigotzky, Dan Horák, Gaurav Batra, Hari Bathini,
Jason Gunthorpe, Nathan Chancellor, Naveen N. Rao, Nicholas Piggin, Pali
Rohár, Randy Dunlap, and Rob Herring.
* tag 'powerpc-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/iommu: Incorrect DDW Table is referenced for SR-IOV device
powerpc/iommu: DMA address offset is incorrectly calculated with 2MB TCEs
powerpc/iommu: Remove iommu_del_device()
powerpc/crypto: Fix aes-gcm-p10 build when VSX=n
powerpc/bpf: populate extable entries only during the last pass
powerpc/boot: Disable power10 features after BOOTAFLAGS assignment
powerpc/64s/radix: Fix soft dirty tracking
powerpc/fsl_uli1575: fix kconfig warnings and build errors
powerpc/isa-bridge: Fix ISA mapping when "ranges" is not present
Linus Torvalds [Sun, 21 May 2023 17:55:31 +0000 (10:55 -0700)]
Merge tag '6.4-rc2-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull ksmbd server fixes from Steve French:
- two fixes for incorrect SMB3 message validation (one for client which
uses 8 byte padding, and one for empty bcc)
- two fixes for out of bounds bugs: one for username offset checks (in
session setup) and the other for create context name length checks in
open requests
* tag '6.4-rc2-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: smb2: Allow messages padded to 8byte boundary
ksmbd: allocate one more byte for implied bcc[0]
ksmbd: fix wrong UserName check in session_user
ksmbd: fix global-out-of-bounds in smb2_find_context_vals
Linus Torvalds [Sun, 21 May 2023 17:20:58 +0000 (10:20 -0700)]
Merge tag '6.4-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client fixes from Steve French:
"Two smb3 client fixes, both related to deferred close, and also for
stable:
- send close for deferred handles before not after lease break
response to avoid possible sharing violations
- check all opens on an inode (looking for deferred handles) when
lease break is returned not just the handle the lease break came in
on"
* tag '6.4-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
SMB3: drop reference to cfile before sending oplock break
SMB3: Close all deferred handles of inode in case of handle lease break
Mingwei Zhang [Tue, 9 May 2023 03:23:48 +0000 (03:23 +0000)]
KVM: VMX: add MSR_IA32_TSX_CTRL into msrs_to_save
Add MSR_IA32_TSX_CTRL into msrs_to_save[] to explicitly tell userspace to
save/restore the register value during migration. Missing this may cause
userspace that relies on KVM ioctl(KVM_GET_MSR_INDEX_LIST) fail to port the
value to the target VM.
In addition, there is no need to add MSR_IA32_TSX_CTRL when
ARCH_CAP_TSX_CTRL_MSR is not supported in kvm_get_arch_capabilities(). So
add the checking in kvm_probe_msr_to_save().
Drop KVM's manipulation of guest's CPUID.0x12.1 ECX and EDX, i.e. the
allowed XFRM of SGX enclaves, now that KVM explicitly checks the guest's
allowed XCR0 when emulating ECREATE.
Note, this could theoretically break a setup where userspace advertises
a "bad" XFRM and relies on KVM to provide a sane CPUID model, but QEMU
is the only known user of KVM SGX, and QEMU explicitly sets the SGX CPUID
XFRM subleaf based on the guest's XCR0.
KVM: VMX: Don't rely _only_ on CPUID to enforce XCR0 restrictions for ECREATE
Explicitly check the vCPU's supported XCR0 when determining whether or not
the XFRM for ECREATE is valid. Checking CPUID works because KVM updates
guest CPUID.0x12.1 to restrict the leaf to a subset of the guest's allowed
XCR0, but that is rather subtle and KVM should not modify guest CPUID
except for modeling true runtime behavior (allowed XFRM is most definitely
not "runtime" behavior).
Linus Torvalds [Sat, 20 May 2023 17:33:57 +0000 (10:33 -0700)]
Merge tag 'tty-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.4-rc3 to resolve
some reported problems, and add some new device ids. These include:
- termios documentation updates
- vc_screen use-after-free fix
- memory leak fix in arc_uart driver
- new 8250 driver ids
- other small serial driver fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF
serial: qcom-geni: fix enabling deactivated interrupt
serial: 8250_bcm7271: fix leak in `brcmuart_probe`
serial: 8250_bcm7271: balance clk_enable calls
serial: arc_uart: fix of_iomap leak in `arc_serial_probe`
serial: 8250: Document termios parameter of serial8250_em485_config()
serial: Add support for Advantech PCI-1611U card
serial: 8250_exar: Add support for USR298x PCI Modems
Linus Torvalds [Sat, 20 May 2023 17:16:38 +0000 (10:16 -0700)]
Merge tag 'usb-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are some USB fixes for 6.4-rc3, as well as a driver core fix that
resolves a memory leak that shows up in USB devices easier than other
subsystems.
Included in here are:
- driver core memory leak as reported and tested by syzbot and
developers
- dwc3 driver fixes for reported problems
- xhci driver fixes for reported problems
- USB gadget driver reverts to resolve regressions
- usbtmc driver fix for syzbot reported problem
- thunderbolt driver fixes for reported issues
- other small USB fixes
All of these, except for the driver core fix, have been in linux-next
with no reported problems. The driver core fix was tested and verified
to solve the issue by syzbot and the original reporter"
* tag 'usb-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
driver core: class: properly reference count class_dev_iter()
xhci: Fix incorrect tracking of free space on transfer rings
xhci-pci: Only run d3cold avoidance quirk for s2idle
usb-storage: fix deadlock when a scsi command timeouts more than once
usb: dwc3: fix a test for error in dwc3_core_init()
usb: typec: tps6598x: Fix fault at module removal
usb: gadget: u_ether: Fix host MAC address case
usb: typec: altmodes/displayport: fix pin_assignment_show
Revert "usb: gadget: udc: core: Invoke usb_gadget_connect only when started"
Revert "usb: gadget: udc: core: Prevent redundant calls to pullup"
usb: gadget: drop superfluous ':' in doc string
usb: dwc3: debugfs: Resume dwc3 before accessing registers
USB: UHCI: adjust zhaoxin UHCI controllers OverCurrent bit value
usb: dwc3: fix gadget mode suspend interrupt handler issue
usb: dwc3: gadget: Improve dwc3_gadget_suspend() and dwc3_gadget_resume()
USB: usbtmc: Fix direction for 0-length ioctl control messages
thunderbolt: Clear registers properly when auto clear isn't in use
- Deny writeable mmap mapping on a readonly block device (Loic)
- Kill unused define that got introduced by accident (Christoph)
- Error handling fix for s390 dasd (Stefan)
- ublk locking fix (Ming)
* tag 'block-6.4-2023-05-20' of git://git.kernel.dk/linux:
block: remove NFL4_UFLG_MASK
block: Deny writable memory mapping if block is read-only
s390/dasd: fix command reject error on ESE devices
nvme-pci: Add quirk for Teamgroup MP33 SSD
ublk: fix AB-BA lockdep warning
nvme: do not let the user delete a ctrl before a complete initialization
nvme-multipath: don't call blk_mark_disk_dead in nvme_mpath_remove_disk
nvme-pci: clamp max_hw_sectors based on DMA optimized limitation
nvme-pci: add quirk for missing secondary temperature thresholds
nvme-pci: add NVME_QUIRK_BOGUS_NID for HS-SSD-FUTURE 2048G
The NFL4_UFLG_MASK define slipped in in commit 9208d4149758
("block: add a ->get_unique_id method") and should never have been
added, as NFSD as the only user of it already has it's copy.
Jakub Kicinski [Sat, 20 May 2023 05:48:26 +0000 (22:48 -0700)]
Merge tag 'for-net-2023-05-19' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix compiler warnings on btnxpuart
- Fix potential double free on hci_conn_unlink
- Fix UAF on hci_conn_hash_flush
* tag 'for-net-2023-05-19' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: btnxpuart: Fix compiler warnings
Bluetooth: Unlink CISes when LE disconnects in hci_conn_del
Bluetooth: Fix UAF in hci_conn_hash_flush again
Bluetooth: Refcnt drop must be placed last in hci_conn_unlink
Bluetooth: Fix potential double free caused by hci_conn_unlink
====================
Taehee Yoo [Wed, 17 May 2023 14:30:10 +0000 (14:30 +0000)]
net: fix stack overflow when LRO is disabled for virtual interfaces
When the virtual interface's feature is updated, it synchronizes the
updated feature for its own lower interface.
This propagation logic should be worked as the iteration, not recursively.
But it works recursively due to the netdev notification unexpectedly.
This problem occurs when it disables LRO only for the team and bonding
interface type.
If team0's LRO feature is updated, it generates the NETDEV_FEAT_CHANGE
event to its own lower interfaces(team1 ~ team200).
It is worked by netdev_sync_lower_features().
So, the NETDEV_FEAT_CHANGE notification logic of each lower interface
work iteratively.
But generated NETDEV_FEAT_CHANGE event is also sent to the upper
interface too.
upper interface(team0) generates the NETDEV_FEAT_CHANGE event for its own
lower interfaces again.
lower and upper interfaces receive this event and generate this
event again and again.
So, the stack overflow occurs.
But it is not the infinite loop issue.
Because the netdev_sync_lower_features() updates features before
generating the NETDEV_FEAT_CHANGE event.
Already synchronized lower interfaces skip notification logic.
So, it is just the problem that iteration logic is changed to the
recursive unexpectedly due to the notification mechanism.
Reproducer:
ip link add team0 type team
ethtool -K team0 lro on
for i in {1..200}
do
ip link add team$i master team0 type team
ethtool -K team$i lro on
done
ethtool -K team0 lro off
In order to fix it, the notifier_ctx member of bonding/team is introduced.
Alan Stern [Fri, 19 May 2023 19:32:30 +0000 (15:32 -0400)]
fbdev: udlfb: Fix endpoint check
The syzbot fuzzer detected a problem in the udlfb driver, caused by an
endpoint not having the expected type:
usb 1-1: Read EDID byte 0 failed: -71
usb 1-1: Unable to get valid EDID from device/display
------------[ cut here ]------------
usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 0 PID: 9 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880
drivers/usb/core/urb.c:504
Modules linked in:
CPU: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.4.0-rc1-syzkaller-00016-ga4422ff22142 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google
04/28/2023
Workqueue: usb_hub_wq hub_event
RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
...
Call Trace:
<TASK>
dlfb_submit_urb+0x92/0x180 drivers/video/fbdev/udlfb.c:1980
dlfb_set_video_mode+0x21f0/0x2950 drivers/video/fbdev/udlfb.c:315
dlfb_ops_set_par+0x2a7/0x8d0 drivers/video/fbdev/udlfb.c:1111
dlfb_usb_probe+0x149a/0x2710 drivers/video/fbdev/udlfb.c:1743
The current approach for this issue failed to catch the problem
because it only checks for the existence of a bulk-OUT endpoint; it
doesn't check whether this endpoint is the one that the driver will
actually use.
We can fix the problem by instead checking that the endpoint used by
the driver does exist and is bulk-OUT.
Niklas Schnelle [Tue, 16 May 2023 11:00:33 +0000 (13:00 +0200)]
fbdev: atyfb: Remove unused clock determination
Just below the removed lines par->clk_wr_offset is hard coded to 3 so
there is no use in determining a different clock just to then ignore it
anyway. This also removes the only I/O port use remaining in the driver
allowing it to be built without CONFIG_HAS_IOPORT.
Arnd Bergmann [Tue, 16 May 2023 20:28:09 +0000 (22:28 +0200)]
fbdev: i810: include i810_main.h in i810_dvt.c
Building with W=1 shows that a header needs to be included to
make the prototypes visible:
drivers/video/fbdev/i810/i810_dvt.c:194:6: error: no previous prototype for 'round_off_xres' [-Werror=missing-prototypes]
drivers/video/fbdev/i810/i810_dvt.c:233:6: error: no previous prototype for 'i810fb_encode_registers' [-Werror=missing-prototypes]
drivers/video/fbdev/i810/i810_dvt.c:245:6: error: no previous prototype for 'i810fb_fill_var_timings' [-Werror=missing-prototypes]
drivers/video/fbdev/i810/i810_dvt.c:279:5: error: no previous prototype for 'i810_get_watermark' [-Werror=missing-prototypes]
Adding the header leads to another warning from a mismatched
prototype, so fix this as well:
drivers/video/fbdev/i810/i810_dvt.c:280:5: error: conflicting types for 'i810_get_watermark'; have 'u32(struct fb_var_screeninfo *,
Loic Poulain [Wed, 10 May 2023 07:42:23 +0000 (09:42 +0200)]
block: Deny writable memory mapping if block is read-only
User should not be able to write block device if it is read-only at
block level (e.g force_ro attribute). This is ensured in the regular
fops write operation (blkdev_write_iter) but not when writing via
user mapping (mmap), allowing user to actually write a read-only
block device via a PROT_WRITE mapping.
Example: This can lead to integrity issue of eMMC boot partition
(e.g mmcblk0boot0) which is read-only by default.
To fix this issue, simply deny shared writable mapping if the block
is readonly.
Note: Block remains writable if switch to read-only is performed
after the initial mapping, but this is expected behavior according
to commit a32e236eb93e ("Partially revert "block: fail op_is_write()
requests to read-only partitions"")'.
Linus Torvalds [Sat, 20 May 2023 02:11:20 +0000 (19:11 -0700)]
Merge tag 'drm-fixes-2023-05-20' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Regular fixes pull, amdgpu and msm make up most of these, nothing too
serious, also one i915 and one exynos.
I didn't get a misc fixes pull this week (one of the maintainers is
off, so have to engage the backup) so I think there are a few
outstanding patches that will show up next week,
amdgpu:
- update gfx11 clock counter logic
- Fix a race when disabling gfxoff on gfx10/11 for profiling
- Raven/Raven2/PCO clock counter fix
- Add missing get_vbios_fb_size for GMC 11
- Fix a spurious irq warning in the device remove case
- Fix possible power mode mismatch between driver and PMFW
- USB4 fix
exynos:
- fix build warning
i915:
- fix missing NULL check in HDCP code
msm:
- display:
- msm8998: fix fetch and qos to align with downstream
- msm8998: fix LM pairs to align with downstream
- remove unused INTF0 interrupt mask on some chipsets
- remove TE2 block from relevant chipsets
- relocate non-MDP_TOP offset to different header
- fix some indentation
- fix register offets/masks for dither blocks
- make ping-ping block length 0
- remove duplicated defines
- fix log mask for writeback block
- unregister the hdmi codec for dp during unbind
- fix yaml warnings
- gpu:
- fix submit error path leak
- arm-smmu-qcom fix for regression that broke per-process page
tables
- fix no-iommu crash"
* tag 'drm-fixes-2023-05-20' of git://anongit.freedesktop.org/drm/drm: (29 commits)
drm/amd/display: enable dpia validate
drm/amd/pm: fix possible power mode mismatch between driver and PMFW
drm/amdgpu: skip disabling fence driver src_irqs when device is unplugged
drm/amdgpu/gmc11: implement get_vbios_fb_size()
drm/amdgpu: Differentiate between Raven2 and Raven/Picasso according to revision id
drm/amdgpu/gfx11: Adjust gfxoff before powergating on gfx11 as well
drm/amdgpu/gfx10: Disable gfxoff before disabling powergating.
drm/amdgpu/gfx11: update gpu_clock_counter logic
drm/msm: Be more shouty if per-process pgtables aren't working
iommu/arm-smmu-qcom: Fix missing adreno_smmu's
drm/i915/hdcp: Check if media_gt exists
drm/exynos: fix g2d_open/close helper function definitions
drm/msm: Fix submit error-path leaks
drm/msm/iommu: Fix null pointer dereference in no-IOMMU case
dt-bindings: display/msm: dsi-controller-main: Document qcom, master-dsi and qcom, sync-dual-dsi
drm/msm/dpu: Remove duplicate register defines from INTF
drm/msm/dpu: Set PINGPONG block length to zero for DPU >= 7.0.0
drm/msm/dpu: Use V2 DITHER PINGPONG sub-block in SM8[34]50/SC8280XP
drm/msm/dpu: Fix PP_BLK_DIPHER -> DITHER typo
drm/msm/dpu: Reindent REV_7xxx interrupt masks with tabs
...
Stefan Haberland [Fri, 19 May 2023 10:23:40 +0000 (12:23 +0200)]
s390/dasd: fix command reject error on ESE devices
Formatting a thin-provisioned (ESE) device that is part of a PPRC copy
relation might fail with the following error:
dasd-eckd 0.0.f500: An error occurred in the DASD device driver, reason=09
[...]
24 Byte: 0 MSG 4, no MSGb to SYSOP
During format of an ESE disk the Release Allocated Space command is used.
A bit in the payload of the command is set that is not allowed to be set
for devices in a copy relation. This bit is set to allow the partial
release of an extent.
Check for the existence of a copy relation before setting the respective
bit.
Linus Torvalds [Fri, 19 May 2023 22:54:01 +0000 (15:54 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Six small fixes.
Four in drivers and the two core changes should be read together as a
correction to a prior iorequest_cnt fix that exposed us to a potential
use after free"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: core: Decrease scsi_device's iorequest_cnt if dispatch failed
scsi: Revert "scsi: core: Do not increase scsi_device's iorequest_cnt if dispatch failed"
scsi: storvsc: Don't pass unused PFNs to Hyper-V host
scsi: ufs: core: Fix MCQ nr_hw_queues
scsi: ufs: core: Rename symbol sizeof_utp_transfer_cmd_desc()
scsi: ufs: core: Fix MCQ tag calculation
Ruihan Li [Wed, 3 May 2023 13:39:37 +0000 (21:39 +0800)]
Bluetooth: Unlink CISes when LE disconnects in hci_conn_del
Currently, hci_conn_del calls hci_conn_unlink for BR/EDR, (e)SCO, and
CIS connections, i.e., everything except LE connections. However, if
(e)SCO connections are unlinked when BR/EDR disconnects, CIS connections
should also be unlinked when LE disconnects.
In terms of disconnection behavior, CIS and (e)SCO connections are not
too different. One peculiarity of CIS is that when CIS connections are
disconnected, the CIS handle isn't deleted, as per [BLUETOOTH CORE
SPECIFICATION Version 5.4 | Vol 4, Part E] 7.1.6 Disconnect command:
All SCO, eSCO, and CIS connections on a physical link should be
disconnected before the ACL connection on the same physical
connection is disconnected. If it does not, they will be
implicitly disconnected as part of the ACL disconnection.
...
Note: As specified in Section 7.7.5, on the Central, the handle
for a CIS remains valid even after disconnection and, therefore,
the Host can recreate a disconnected CIS at a later point in
time using the same connection handle.
Since hci_conn_link invokes both hci_conn_get and hci_conn_hold,
hci_conn_unlink should perform both hci_conn_put and hci_conn_drop as
well. However, currently it performs only hci_conn_put.
This patch makes hci_conn_unlink call hci_conn_drop as well, which
simplifies the logic in hci_conn_del a bit and may benefit future users
of hci_conn_unlink. But it is noted that this change additionally
implies that hci_conn_unlink can queue disc_work on conn itself, with
the following call stack:
Queued disc_work after hci_conn_del can be spurious, so during the
process of hci_conn_del, it is necessary to make the call to
cancel_delayed_work(&conn->disc_work) after invoking hci_conn_unlink.
Ruihan Li [Wed, 3 May 2023 13:39:36 +0000 (21:39 +0800)]
Bluetooth: Fix UAF in hci_conn_hash_flush again
Commit 06149746e720 ("Bluetooth: hci_conn: Add support for linking
multiple hcon") reintroduced a previously fixed bug [1] ("KASAN:
slab-use-after-free Read in hci_conn_hash_flush"). This bug was
originally fixed by commit 5dc7d23e167e ("Bluetooth: hci_conn: Fix
possible UAF").
The hci_conn_unlink function was added to avoid invalidating the link
traversal caused by successive hci_conn_del operations releasing extra
connections. However, currently hci_conn_unlink itself also releases
extra connections, resulted in the reintroduced bug.
This patch follows a more robust solution for cleaning up all
connections, by repeatedly removing the first connection until there are
none left. This approach does not rely on the inner workings of
hci_conn_del and ensures proper cleanup of all connections.
Meanwhile, we need to make sure that hci_conn_del never fails. Indeed it
doesn't, as it now always returns zero. To make this a bit clearer, this
patch also changes its return type to void.
Reported-by: [email protected] Closes: https://lore.kernel.org/linux-bluetooth/[email protected]/ Fixes: 06149746e720 ("Bluetooth: hci_conn: Add support for linking multiple hcon") Signed-off-by: Ruihan Li <[email protected]> Co-developed-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
Ruihan Li [Wed, 3 May 2023 13:39:35 +0000 (21:39 +0800)]
Bluetooth: Refcnt drop must be placed last in hci_conn_unlink
If hci_conn_put(conn->parent) reduces conn->parent's reference count to
zero, it can immediately deallocate conn->parent. At the same time,
conn->link->list has its head in conn->parent, causing use-after-free
problems in the latter list_del_rcu(&conn->link->list).
This problem can be easily solved by reordering the two operations,
i.e., first performing the list removal with list_del_rcu and then
decreasing the refcnt with hci_conn_put.
Reported-by: Luiz Augusto von Dentz <[email protected]> Closes: https://lore.kernel.org/linux-bluetooth/CABBYNZ+1kce8_RJrLNOXd_8=Mdpb=2bx4Nto-hFORk=qiOkoCg@mail.gmail.com/ Fixes: 06149746e720 ("Bluetooth: hci_conn: Add support for linking multiple hcon") Signed-off-by: Ruihan Li <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
Ruihan Li [Wed, 3 May 2023 13:39:34 +0000 (21:39 +0800)]
Bluetooth: Fix potential double free caused by hci_conn_unlink
The hci_conn_unlink function is being called by hci_conn_del, which
means it should not call hci_conn_del with the input parameter conn
again. If it does, conn may have already been released when
hci_conn_unlink returns, leading to potential UAF and double-free
issues.
This patch resolves the problem by modifying hci_conn_unlink to release
only conn's child links when necessary, but never release conn itself.
Trond Myklebust [Wed, 10 May 2023 16:28:00 +0000 (12:28 -0400)]
SUNRPC: Don't change task->tk_status after the call to rpc_exit_task
Some calls to rpc_exit_task() may deliberately change the value of
task->tk_status, for instance because it gets checked by the RPC call's
rpc_release() callback. That makes it wrong to reset the value to
task->tk_rpc_status.
In particular this causes a bug where the rpc_call_done() callback tries
to fail over a set of pNFS/flexfiles writes to a different IP address,
but the reset of task->tk_status causes nfs_commit_release_pages() to
immediately mark the file as having a fatal error.
kmap_atomic() is deprecated in favor of kmap_local_{folio,page}().
Therefore, replace kmap_atomic() with kmap_local_folio() in
nfs_readdir_folio_array_append().
kmap_atomic() disables page-faults and preemption (the latter only for
!PREEMPT_RT kernels), However, the code within the mapping/un-mapping in
nfs_readdir_folio_array_append() does not depend on the above-mentioned
side effects.
Therefore, a mere replacement of the old API with the new one is all that
is required (i.e., there is no need to explicitly add any calls to
pagefault_disable() and/or preempt_disable()).
Tested with (x)fstests in a QEMU/KVM x86_32 VM, 6GB RAM, booting a kernel
with HIGHMEM64GB enabled.
Cc: Ira Weiny <[email protected]> Signed-off-by: Fabio M. De Francesco <[email protected]> Fixes: ec108d3cc766 ("NFS: Convert readdir page array functions to use a folio") Signed-off-by: Anna Schumaker <[email protected]>
Linus Torvalds [Fri, 19 May 2023 19:02:12 +0000 (12:02 -0700)]
Merge tag 'ceph-for-6.4-rc3' of https://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A workaround for a just discovered bug in MClientSnap encoding which
goes back to 2017 (marked for stable) and a fixup to quieten a static
checker"
* tag 'ceph-for-6.4-rc3' of https://github.com/ceph/ceph-client:
ceph: force updating the msg pointer in non-split case
ceph: silence smatch warning in reconnect_caps_cb()
Linus Torvalds [Fri, 19 May 2023 18:44:08 +0000 (11:44 -0700)]
Merge tag 'pm-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two issues in the cpupower utility and get rid of a spurious
warning message printed to the kernel log by the ACPI cpufreq driver
after recent changes.
Specifics:
- Get rid of a warning message printed by the ACPI cpufreq driver
after recent changes in it when anohter CPU performance scaling
driver is registered already when it starts (Petr Pavlu)
- Make cpupower read TSC on each CPU right before reading MPERF so as
to reduce the potential time difference between the TSC and MPERF
accesses and improve the C0 percentage calculation (Wyes Karny)
- Fix a possible file handle leak and clean up the code in the
sysfs_get_enabled() function in cpupower (Hao Zeng)"
* tag 'pm-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: ACPI: Prevent a warning when another frequency driver is loaded
cpupower: Make TSC read per CPU for Mperf monitor
cpupower:Fix resource leaks in sysfs_get_enabled()
Linus Torvalds [Fri, 19 May 2023 18:38:41 +0000 (11:38 -0700)]
Merge tag 'acpi-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Add an ACPI IRQ override quirk for LG UltraPC 17U70P so as to make the
internal keyboard work on that machine (Rubén Gómez)"
* tag 'acpi-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: resource: Add IRQ override quirk for LG UltraPC 17U70P
Linus Torvalds [Fri, 19 May 2023 18:25:17 +0000 (11:25 -0700)]
Merge tag 'docs-6.4-fixes' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"Four straightforward documentation fixes"
* tag 'docs-6.4-fixes' of git://git.lwn.net/linux:
Documentation/filesystems: ramfs-rootfs-initramfs: use :Author:
Documentation/filesystems: sharedsubtree: add section headings
docs: quickly-build-trimmed-linux: various small fixes and improvements
Documentation: use capitalization for chapters and acronyms
Linus Torvalds [Fri, 19 May 2023 18:11:04 +0000 (11:11 -0700)]
Merge tag 's390-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Add check whether the required facilities are installed before using
the s390-specific ChaCha20 implementation
- Key blobs for s390 protected key interface IOCTLs commands
PKEY_VERIFYKEY2 and PKEY_VERIFYKEY3 may contain clear key material.
Zeroize copies of these keys in kernel memory after creating
protected keys
- Set CONFIG_INIT_STACK_NONE=y in defconfigs to avoid extra overhead of
initializing all stack variables by default
- Make sure that when a new channel-path is enabled all subchannels are
evaluated: with and without any devices connected on it
- When SMT thread CPUs are added to CPU topology masks the nr_cpu_ids
limit is not checked and could be exceeded. Respect the nr_cpu_ids
limit and avoid a warning when CONFIG_DEBUG_PER_CPU_MAPS is set
- The pointer to IPL Parameter Information Block is stored in the
absolute lowcore as a virtual address. Save it as the physical
address for later use by dump tools
- Fix a Queued Direct I/O (QDIO) problem on z/VM guests using QIOASSIST
with dedicated (pass through) QDIO-based devices such as FCP, real
OSA or HiperSockets
- s390's struct statfs and struct statfs64 contain padding, which
field-by-field copying does not set. Initialize the respective
structures with zeros before filling them and copying to userspace
- Grow s390 compat_statfs64, statfs and statfs64 structures f_spare
array member to cover padding and simplify things
- Remove obsolete SCHED_BOOK and SCHED_DRAWER configs
- Remove unneeded S390_CCW_IOMMU and S390_AP_IOM configs
* tag 's390-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/iommu: get rid of S390_CCW_IOMMU and S390_AP_IOMMU
s390/Kconfig: remove obsolete configs SCHED_{BOOK,DRAWER}
s390/uapi: cover statfs padding by growing f_spare
statfs: enforce statfs[64] structure initialization
s390/qdio: fix do_sqbs() inline assembly constraint
s390/ipl: fix IPIB virtual vs physical address confusion
s390/topology: honour nr_cpu_ids when adding CPUs
s390/cio: include subchannels without devices also for evaluation
s390/defconfigs: set CONFIG_INIT_STACK_NONE=y
s390/pkey: zeroize key blobs
s390/crypto: use vector instructions only if available for ChaCha20
Linus Torvalds [Fri, 19 May 2023 18:05:42 +0000 (11:05 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"A mixture of compiler/static checker resolutions and a couple of MTE
fixes:
- Avoid erroneously marking untagged pages with PG_mte_tagged
- Always reset KASAN tags for destination page in copy_page()
- Mark PMU header functions 'static inline'
- Fix some sparse warnings due to missing casts"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mte: Do not set PG_mte_tagged if tags were not initialized
arm64: Also reset KASAN tag if page is not PG_mte_tagged
arm64: perf: Mark all accessor functions inline
ARM: perf: Mark all accessor functions inline
arm64: vdso: Pass (void *) to virt_to_page()
arm64/mm: mark private VM_FAULT_X defines as vm_fault_t
Michal Luczaj [Wed, 10 May 2023 14:04:09 +0000 (16:04 +0200)]
KVM: Fix vcpu_array[0] races
In kvm_vm_ioctl_create_vcpu(), add vcpu to vcpu_array iff it's safe to
access vcpu via kvm_get_vcpu() and kvm_for_each_vcpu(), i.e. when there's
no failure path requiring vcpu removal and destruction. Such order is
important because vcpu_array accessors may end up referencing vcpu at
vcpu_array[0] even before online_vcpus is set to 1.
When online_vcpus=0, any call to kvm_get_vcpu() goes through
array_index_nospec() and ends with an attempt to xa_load(vcpu_array, 0):
int num_vcpus = atomic_read(&kvm->online_vcpus);
i = array_index_nospec(i, num_vcpus);
return xa_load(&kvm->vcpu_array, i);
Similarly, when online_vcpus=0, a kvm_for_each_vcpu() does not iterate over
an "empty" range, but actually [0, ULONG_MAX]:
In both cases, such online_vcpus=0 edge case, even if leading to
unnecessary calls to XArray API, should not be an issue; requesting
unpopulated indexes/ranges is handled by xa_load() and xa_for_each_range().
However, this means that when the first vCPU is created and inserted in
vcpu_array *and* before online_vcpus is incremented, code calling
kvm_get_vcpu()/kvm_for_each_vcpu() already has access to that first vCPU.
This should not pose a problem assuming that once a vcpu is stored in
vcpu_array, it will remain there, but that's not the case:
kvm_vm_ioctl_create_vcpu() first inserts to vcpu_array, then requests a
file descriptor. If create_vcpu_fd() fails, newly inserted vcpu is removed
from the vcpu_array, then destroyed:
vcpu->vcpu_idx = atomic_read(&kvm->online_vcpus);
r = xa_insert(&kvm->vcpu_array, vcpu->vcpu_idx, vcpu, GFP_KERNEL_ACCOUNT);
kvm_get_kvm(kvm);
r = create_vcpu_fd(vcpu);
if (r < 0) {
xa_erase(&kvm->vcpu_array, vcpu->vcpu_idx);
kvm_put_kvm_no_destroy(kvm);
goto unlock_vcpu_destroy;
}
atomic_inc(&kvm->online_vcpus);
This results in a possible race condition when a reference to a vcpu is
acquired (via kvm_get_vcpu() or kvm_for_each_vcpu()) moments before said
vcpu is destroyed.
KVM: Don't enable hardware after a restart/shutdown is initiated
Reject hardware enabling, i.e. VM creation, if a restart/shutdown has
been initiated to avoid re-enabling hardware between kvm_reboot() and
machine_{halt,power_off,restart}(). The restart case is especially
problematic (for x86) as enabling VMX (or clearing GIF in KVM_RUN on
SVM) blocks INIT, which results in the restart/reboot hanging as BIOS
is unable to wake and rendezvous with APs.
Note, this bug, and the original issue that motivated the addition of
kvm_reboot(), is effectively limited to a forced reboot, e.g. `reboot -f`.
In a "normal" reboot, userspace will gracefully teardown userspace before
triggering the kernel reboot (modulo bugs, errors, etc), i.e. any process
that might do ioctl(KVM_CREATE_VM) is long gone.
KVM: Use syscore_ops instead of reboot_notifier to hook restart/shutdown
Use syscore_ops.shutdown to disable hardware virtualization during a
reboot instead of using the dedicated reboot_notifier so that KVM disables
virtualization _after_ system_state has been updated. This will allow
fixing a race in KVM's handling of a forced reboot where KVM can end up
enabling hardware virtualization between kernel_restart_prepare() and
machine_restart().
Rename KVM's hook to match the syscore op to avoid any possible confusion
from wiring up a "reboot" helper to a "shutdown" hook (neither "shutdown
nor "reboot" is completely accurate as the hook handles both).
Opportunistically rewrite kvm_shutdown()'s comment to make it less VMX
specific, and to explain why kvm_rebooting exists.
Linus Torvalds [Fri, 19 May 2023 17:55:55 +0000 (10:55 -0700)]
Merge tag 'sound-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes that have been gathered since rc1:
- Lots of small ASoC SOF Intel fixes
- A couple of UAF and NULL-dereference fixes
- Quirks and updates for HD-audio, USB-audio and ASoC AMD
- A few minor build / sparse warning fixes
- MAINTAINERS and DT updates"
* tag 'sound-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (38 commits)
ALSA: hda: Add NVIDIA codec IDs a3 through a7 to patch table
ALSA: oss: avoid missing-prototype warnings
ALSA: cs46xx: mark snd_cs46xx_download_image as static
ALSA: hda: Fix Oops by 9.1 surround channel names
ASoC: SOF: topology: Fix tuples array allocation
ASoC: SOF: Separate the tokens for input and output pin index
MAINTAINERS: Remove self from Cirrus Codec drivers
ASoC: cs35l56: Prevent unbalanced pm_runtime in dsp_work() on SoundWire
ASoC: SOF: topology: Fix logic for copying tuples
ASoC: SOF: pm: save io region state in case of errors in resume
ASoC: MAINTAINERS: drop Krzysztof Kozlowski from Samsung audio
ASoC: mediatek: mt8186: Fix use-after-free in driver remove path
ASoC: SOF: ipc3-topology: Make sure that only one cmd is sent in dai_config
ASoC: SOF: sof-client-probes: fix pm_runtime imbalance in error handling
ASoC: SOF: pcm: fix pm_runtime imbalance in error handling
ASoC: SOF: debug: conditionally bump runtime_pm counter on exceptions
ASoC: SOF: Intel: hda-mlink: add helper to program SoundWire PCMSyCM registers
ASoC: SOF: Intel: hda-mlink: initialize instance_offset member
ASoC: SOF: Intel: hda-mlink: use 'ml_addr' parameter consistently
ASoC: SOF: Intel: hda-mlink: fix base_ptr computation
...
Will Deacon [Thu, 18 May 2023 10:25:28 +0000 (11:25 +0100)]
bpf: Fix mask generation for 32-bit narrow loads of 64-bit fields
A narrow load from a 64-bit context field results in a 64-bit load
followed potentially by a 64-bit right-shift and then a bitwise AND
operation to extract the relevant data.
In the case of a 32-bit access, an immediate mask of 0xffffffff is used
to construct a 64-bit BPP_AND operation which then sign-extends the mask
value and effectively acts as a glorified no-op. For example:
0: 61 10 00 00 00 00 00 00 r0 = *(u32 *)(r1 + 0)
results in the following code generation for a 64-bit field:
The __NR_execve definition for i386 was deleted by mistake
in the commit ece7f7c0507c ("perf bench syscall: Add fork
syscall benchmark"), add it to fix the build error on i386.
- Read TSC on each CPU right before reading MPERF so as to reduce the
potential time difference between the TSC and MPERF accesses and
improve the C0 percentage calculation (Wyes Karny).
- Fix a possible file handle leak and clean up the code in
sysfs_get_enabled() (Hao Zeng).
* pm-tools:
cpupower: Make TSC read per CPU for Mperf monitor
cpupower:Fix resource leaks in sysfs_get_enabled()
Merge tag 'linux-cpupower-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Pull cpupower utility fixes for 6.4-rc3 from Shuah Khan:
"This cpupower fixes update for Linux 67.4-rc3 consists of:
- a resource leak fix
- fix drift in C0 percentage calculation due to System-wide TSC read.
To lower this drift read TSC per CPU and also just after mperf read.
This technique improves C0 percentage calculation in Mperf monitor"
* tag 'linux-cpupower-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower: Make TSC read per CPU for Mperf monitor
cpupower:Fix resource leaks in sysfs_get_enabled()
Dan Carpenter [Mon, 15 May 2023 10:32:47 +0000 (13:32 +0300)]
fbdev: omapfb: panel-tpo-td043mtea1: fix error code in probe()
This was using the wrong variable, "r", instead of "ddata->vcc_reg", so
it returned success instead of a negative error code.
Fixes: 0d3dbeb8142a ("video: fbdev: omapfb: panel-tpo-td043mtea1: Make use of the helper function dev_err_probe()") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Helge Deller <[email protected]>
Ian Rogers [Wed, 17 May 2023 22:57:06 +0000 (15:57 -0700)]
perf test attr: Fix python SafeConfigParser() deprecation warning
Address the warning:
```
tests/attr.py:155: DeprecationWarning: The SafeConfigParser class has
been renamed to ConfigParser in Python 3.2. This alias will be
removed in Python 3.12. Use ConfigParser directly instead.
parser = configparser.SafeConfigParser()
```
by removing the word 'Safe'.
When class_dev_iter is initialized, the reference count for the subsys
private structure is incremented, but never decremented, causing a
memory leak over time. To resolve this, save off a pointer to the
internal structure into the class_dev_iter structure and then when the
iterator is finished, drop the reference count.
Shenwei Wang [Thu, 18 May 2023 15:02:02 +0000 (10:02 -0500)]
net: fec: add dma_wmb to ensure correct descriptor values
Two dma_wmb() are added in the XDP TX path to ensure proper ordering of
descriptor and buffer updates:
1. A dma_wmb() is added after updating the last BD to make sure
the updates to rest of the descriptor are visible before
transferring ownership to FEC.
2. A dma_wmb() is also added after updating the bdp to ensure these
updates are visible before updating txq->bd.cur.
3. Start the xmit of the frame immediately right after configuring the
tx descriptor.
Vladimir Oltean [Thu, 18 May 2023 15:41:46 +0000 (18:41 +0300)]
MAINTAINERS: add myself as maintainer for enetc
I would like to be copied on new patches submitted on this driver.
I am relatively familiar with the code, having practically maintained
it for a while.
Sunil Goutham [Thu, 18 May 2023 06:40:42 +0000 (12:10 +0530)]
octeontx2-pf: Fix TSOv6 offload
HW adds segment size to the payload length
in the IPv6 header. Fix payload length to
just TCP header length instead of 'TCP header
size + IPv6 header size'.
Fixes: 86d7476078b8 ("octeontx2-pf: TCP segmentation offload support") Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: Ratheesh Kannoth <[email protected]> Signed-off-by: David S. Miller <[email protected]>
projects / linux.git / log