Merge tag 'for-5.7-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"We have a few regressions and one fix for stable:
- revert fsync optimization
- fix lost i_size update
- fix a space accounting leak
- build fix, add back definition of a deprecated ioctl flag
- fix search condition for old roots in relocation"
* tag 'for-5.7-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: re-instantiate the removed BTRFS_SUBVOL_CREATE_ASYNC definition
btrfs: fix reclaim counter leak of space_info objects
btrfs: make full fsyncs always operate on the entire file again
btrfs: fix lost i_size update after cloning inline extent
btrfs: check commit root generation in should_ignore_root
Merge tag 'afs-fixes-20200413' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull AFS fixes from David Howells:
- Fix the decoding of fetched file status records so that the xdr
pointer is advanced under all circumstances.
- Fix the decoding of a fetched file status record that indicates an
inline abort (ie. an error) so that it sets the flag saying the
decoder stored the abort code.
- Fix the decoding of the result of the rename operation so that it
doesn't skip the decoding of the second fetched file status (ie. that
of the dest dir) in the case that the source and dest dirs were the
same as this causes the xdr pointer not to be advanced, leading to
incorrect decoding of subsequent parts of the reply.
- Fix the dump of a bad YFSFetchStatus record to dump the full length.
- Fix a race between local editing of directory contents and accessing
the dir for reading or d_revalidate by using the same lock in both.
- Fix afs_d_revalidate() to not accidentally reverse the version on a
dentry when it's meant to be bringing it forward.
* tag 'afs-fixes-20200413' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Fix afs_d_validate() to set the right directory version
afs: Fix race between post-modification dir edit and readdir/d_revalidate
afs: Fix length of dump of bad YFSFetchStatus record
afs: Fix rename operation status delivery
afs: Fix decoding of inline abort codes from version 1 status records
afs: Fix missing XDR advance in xdr_decode_{AFS,YFS}FSFetchStatus()
drm/amdgpu: fix the hw hang during perform system reboot and reset
The system reboot failed as some IP blocks enter power gate before perform
hw resource destory. Meanwhile use unify interface to set device CGPG to ungate
state can simplify the amdgpu poweroff or reset ungate guard.
Hui Wang [Tue, 14 Apr 2020 14:27:25 +0000 (22:27 +0800)]
ALSA: hda: call runtime_allow() for all hda controllers
Before the pci_driver->probe() is called, the pci subsystem calls
runtime_forbid() and runtime_get_sync() on this pci dev, so only call
runtime_put_autosuspend() is not enough to enable the runtime_pm on
this device.
For controllers with vgaswitcheroo feature, the pci/quirks.c will call
runtime_allow() for this dev, then the controllers could enter
rt_idle/suspend/resume, but for non-vgaswitcheroo controllers like
Intel hda controllers, the runtime_pm is not enabled because the
runtime_allow() is not called.
Since it is no harm calling runtime_allow() twice, here let hda
driver call runtime_allow() for all controllers. Then the runtime_pm
is enabled on all controllers after the put_autosuspend() is called.
tools headers: Synchronize linux/bits.h with the kernel sources
To pick up the changes in these csets:
295bcca84916 ("linux/bits.h: add compile time sanity check of GENMASK inputs") 3945ff37d2f4 ("linux/bits.h: Extract common header for vDSO")
To address this tools/perf build warning:
Warning: Kernel ABI header at 'tools/include/linux/bits.h' differs from latest version at 'include/linux/bits.h'
diff -u tools/include/linux/bits.h include/linux/bits.h
This clashes with usage of userspace's static_assert(), that, at least
on glibc, is guarded by a ifnded/endif pair, do the same to our copy of
build_bug.h and avoid that diff in check_headers.sh so that we continue
checking for drifts with the kernel sources master copy.
This will all be tested with the set of build containers that includes
uCLibc, musl libc, lots of glibc versions in lots of distros and cross
build environments.
The tools/objtool, tools/bpf, etc were tested as well.
tools headers: Update x86's syscall_64.tbl with the kernel sources
To pick the changes from:
d3b1b776eefc ("x86/entry/64: Remove ptregs qualifier from syscall table") cab56d3484d4 ("x86/entry: Remove ABI prefixes from functions in syscall tables") 27dd84fafcd5 ("x86/entry/64: Use syscall wrappers for x32_rt_sigreturn")
Addressing this tools/perf build warning:
Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
That didn't result in any tooling changes, as what is extracted are just
the first two columns, and these patches touched only the third.
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
To pick the change in:
88be76cdafc7 ("drm/i915: Allow userspace to specify ringsize on construction")
That don't result in any changes in tooling, just silences this perf
build warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h'
diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h
Now 'perf trace' and other code that might use the
tools/perf/trace/beauty autogenerated tables will be able to translate
this new ioctl code into a string:
$ tools/perf/trace/beauty/drm_ioctl.sh > before
$ cp include/uapi/drm/drm.h tools/include/uapi/drm/drm.h
$ tools/perf/trace/beauty/drm_ioctl.sh > after
$ diff -u before after
--- before 2020-04-14 09:28:45.461821077 -0300
+++ after 2020-04-14 09:28:53.594782685 -0300
@@ -107,6 +107,7 @@
[0xCB] = "SYNCOBJ_QUERY",
[0xCC] = "SYNCOBJ_TRANSFER",
[0xCD] = "SYNCOBJ_TIMELINE_SIGNAL",
+ [0xCE] = "MODE_GETFB2",
[DRM_COMMAND_BASE + 0x00] = "I915_INIT",
[DRM_COMMAND_BASE + 0x01] = "I915_FLUSH",
[DRM_COMMAND_BASE + 0x02] = "I915_FLIP",
$
tools headers kvm: Sync linux/kvm.h with the kernel sources
To pick up the changes from:
9a5788c615f5 ("KVM: PPC: Book3S HV: Add a capability for enabling secure guests") 3c9bd4006bfc ("KVM: x86: enable dirty log gradually in small chunks") 13da9ae1cdbf ("KVM: s390: protvirt: introduce and enable KVM_CAP_S390_PROTECTED") e0d2773d487c ("KVM: s390: protvirt: UV calls in support of diag308 0, 1") 19e122776886 ("KVM: S390: protvirt: Introduce instruction data area bounce buffer") 29b40f105ec8 ("KVM: s390: protvirt: Add initial vm and cpu lifecycle handling")
So far we're ignoring those arch specific ioctls, we need to revisit
this at some time to have arch specific tables, etc:
Warning: Kernel ABI header at 'tools/arch/arm/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm/include/uapi/asm/kvm.h'
diff -u tools/arch/arm/include/uapi/asm/kvm.h arch/arm/include/uapi/asm/kvm.h
Warning: Kernel ABI header at 'tools/include/uapi/linux/fscrypt.h' differs from latest version at 'include/uapi/linux/fscrypt.h'
diff -u tools/include/uapi/linux/fscrypt.h include/uapi/linux/fscrypt.h
Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h'
diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h
This automatically picks these new ioctls, making tools such as 'perf
trace' aware of them and possibly allowing to use the strings in
filters, etc:
Juergen Gross [Thu, 26 Mar 2020 08:03:58 +0000 (09:03 +0100)]
xen/xenbus: ensure xenbus_map_ring_valloc() returns proper grant status
xenbus_map_ring_valloc() maps a ring page and returns the status of the
used grant (0 meaning success).
There are Xen hypervisors which might return the value 1 for the status
of a failed grant mapping due to a bug. Some callers of
xenbus_map_ring_valloc() test for errors by testing the returned status
to be less than zero, resulting in no error detected and crashing later
due to a not available ring page.
Set the return value of xenbus_map_ring_valloc() to GNTST_general_error
in case the grant status reported by Xen is greater than zero.
The rtw88 driver defines emtpy functions with multiple indirections
but gets one of these wrong:
drivers/net/wireless/realtek/rtw88/pci.c:1347:12: error: 'rtw_pci_resume' defined but not used [-Werror=unused-function]
1347 | static int rtw_pci_resume(struct device *dev)
| ^~~~~~~~~~~~~~
drivers/net/wireless/realtek/rtw88/pci.c:1342:12: error: 'rtw_pci_suspend' defined but not used [-Werror=unused-function]
1342 | static int rtw_pci_suspend(struct device *dev)
Better simplify it to rely on the conditional reference in
SIMPLE_DEV_PM_OPS(), and mark the functions as __maybe_unused to avoid
warning about it.
I'm not sure if these are needed at all given that the functions
don't do anything, but they were only recently added.
tools arch x86: Sync asm/cpufeatures.h with the kernel sources
To pick up the changes from:
077168e241ec ("x86/mce/amd: Add PPIN support for AMD MCE") 753039ef8b2f ("x86/cpu/amd: Call init_amd_zn() om Family 19h processors too") 6650cdd9a8cc ("x86/split_lock: Enable split lock detection by kernel")
These don't cause any changes in tooling, just silences this perf build
warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
tools headers UAPI: Sync linux/mman.h with the kernel
To get the changes in:
e346b3813067 ("mm/mremap: add MREMAP_DONTUNMAP to mremap()")
Add that to 'perf trace's mremap 'flags' decoder.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/mman.h' differs from latest version at 'include/uapi/linux/mman.h'
diff -u tools/include/uapi/linux/mman.h include/uapi/linux/mman.h
ef2c41cf38a7 ("clone3: allow spawning processes into cgroups")
Add that to 'perf trace's clone 'flags' decoder.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/sched.h' differs from latest version at 'include/uapi/linux/sched.h'
diff -u tools/include/uapi/linux/sched.h include/uapi/linux/sched.h
tools headers: Update linux/vdso.h and grab a copy of vdso/const.h
To get in line with:
8165b57bca21 ("linux/const.h: Extract common header for vDSO")
And silence this tools/perf/ build warning:
Warning: Kernel ABI header at 'tools/include/linux/const.h' differs from latest version at 'include/linux/const.h'
diff -u tools/include/linux/const.h include/linux/const.h
perf python: Check if clang supports -fno-semantic-interposition
The set of C compiler options used by distros to build python bindings
may include options that are unknown to clang, we check for a variety of
such options, add -fno-semantic-interposition to that mix:
This fixes the build on, among others, Manjaro Linux:
GEN /tmp/build/perf/python/perf.so
clang-9: error: unknown argument: '-fno-semantic-interposition'
error: command 'clang' failed with exit status 1
make: Leaving directory '/git/perf/tools/perf'
tools arch x86: Sync the msr-index.h copy with the kernel sources
To pick up the changes in:
6650cdd9a8cc ("x86/split_lock: Enable split lock detection by kernel")
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
objtool: Support Clang non-section symbols in ORC generation
When compiling the kernel with AS=clang, objtool produces a lot of
warnings:
warning: objtool: missing symbol for section .text
warning: objtool: missing symbol for section .init.text
warning: objtool: missing symbol for section .ref.text
It then fails to generate the ORC table.
The problem is that objtool assumes text section symbols always exist.
But the Clang assembler is aggressive about removing them.
When generating relocations for the ORC table, objtool always tries to
reference instructions by their section symbol offset. If the section
symbol doesn't exist, it bails.
Do a fallback: when a section symbol isn't available, reference a
function symbol instead.
CONFIG_UBSAN_TRAP causes GCC to emit a UD2 whenever it encounters an
unreachable code path. This includes __builtin_unreachable(). Because
the BUG() macro uses __builtin_unreachable() after it emits its own UD2,
this results in a double UD2. In this case objtool rightfully detects
that the second UD2 is unreachable:
Yan Zhao [Fri, 13 Mar 2020 03:11:51 +0000 (23:11 -0400)]
drm/i915/gvt: switch to user vfio_group_pin/upin_pages
substitute vfio_pin_pages() and vfio_unpin_pages() with
vfio_group_pin_pages() and vfio_group_unpin_pages(), so that
it will not go through looking up, checking, referencing,
dereferencing of VFIO group in each call.
removed the code that retrieves the non-remapped UEFI runtime services
pointer from the data structure provided by kexec, as it was never really
needed on the kexec boot path: mapping the runtime services table at its
non-remapped address is only needed when calling SetVirtualAddressMap(),
which never happens during a kexec boot in the first place.
However, dropping the 'runtime' member from struct efi_setup_data was a
mistake. That struct is shared ABI between the kernel and the kexec tooling
for x86, and so we cannot simply change its layout. So let's put back the
removed field, but call it 'unused' to reflect the fact that we never look
at its contents. While at it, add a comment to remind our future selves
that the layout is external ABI.
efi/x86: Don't remap text<->rodata gap read-only for mixed mode
Commit
d9e3d2c4f10320 ("efi/x86: Don't map the entire kernel text RW for mixed mode")
updated the code that creates the 1:1 memory mapping to use read-only
attributes for the 1:1 alias of the kernel's text and rodata sections, to
protect it from inadvertent modification. However, it failed to take into
account that the unused gap between text and rodata is given to the page
allocator for general use.
If the vmap'ed stack happens to be allocated from this region, any by-ref
output arguments passed to EFI runtime services that are allocated on the
stack (such as the 'datasize' argument taken by GetVariable() when invoked
from efivar_entry_size()) will be referenced via a read-only mapping,
resulting in a page fault if the EFI code tries to write to it:
Gary Lin [Thu, 9 Apr 2020 13:04:33 +0000 (15:04 +0200)]
efi/x86: Fix the deletion of variables in mixed mode
efi_thunk_set_variable() treated the NULL "data" pointer as an invalid
parameter, and this broke the deletion of variables in mixed mode.
This commit fixes the check of data so that the userspace program can
delete a variable in mixed mode.
reworks the file I/O routines in a way that triggers the following
warning:
drivers/firmware/efi/libstub/file.c:240:1: warning: the frame size
of 1200 bytes is larger than 1024 bytes [-Wframe-larger-than=]
We can work around this issue dropping an instance of efi_char16_t[256]
from the stack frame, and reusing the 'filename' field of the file info
struct that we use to obtain file information from EFI (which contains
the file name even though we already know it since we used it to open
the file in the first place)
Documentation/x86, efi/x86: Clarify EFI handover protocol and its requirements
The EFI handover protocol was introduced on x86 to permit the boot
loader to pass a populated boot_params structure as an additional
function argument to the entry point. This allows the bootloader to
pass the base and size of a initrd image, which is more flexible
than relying on the EFI stub's file I/O routines, which can only
access the file system from which the kernel image itself was loaded
from firmware.
This approach requires a fair amount of internal knowledge regarding
the layout of the boot_params structure on the part of the boot loader,
as well as knowledge regarding the allowed placement of the initrd in
memory, and so it has been deprecated in favour of a new initrd loading
method that is based on existing UEFI protocols and best practices.
So update the x86 boot protocol documentation to clarify that the EFI
handover protocol has been deprecated, and while at it, add a note that
invoking the EFI handover protocol still requires the PE/COFF image to
be loaded properly (as opposed to simply being copied into memory).
Also, drop the code32_start header field from the list of values that
need to be provided, as this is no longer required.
efi/arm: Deal with ADR going out of range in efi_enter_kernel()
Commit
0698fac4ac2a ("efi/arm: Clean EFI stub exit code from cache instead of avoiding it")
introduced a PC-relative reference to 'call_cache_fn' into
efi_enter_kernel(), which lives way at the end of head.S. In some cases,
the ARM version of the ADR instruction does not have sufficient range,
resulting in a build error:
arch/arm/boot/compressed/head.S:1453: Error: invalid constant (fffffffffffffbe4) after fixup
ARM defines an alternative with a wider range, called ADRL, but this does
not exist for Thumb-2. At the same time, the ADR instruction in Thumb-2
has a wider range, and so it does not suffer from the same issue.
So let's switch to ADRL for ARM builds, and keep the ADR for Thumb-2 builds.
efi/x86: Always relocate the kernel for EFI handover entry
Commit
d5cdf4cfeac9 ("efi/x86: Don't relocate the kernel unless necessary")
tries to avoid relocating the kernel in the EFI stub as far as possible.
However, when systemd-boot is used to boot a unified kernel image [1],
the image is constructed by embedding the bzImage as a .linux section in
a PE executable that contains a small stub loader from systemd that will
call the EFI stub handover entry, together with additional sections and
potentially an initrd. When this image is constructed, by for example
dracut, the initrd is placed after the bzImage without ensuring that at
least init_size bytes are available for the bzImage. If the kernel is
not relocated by the EFI stub, this could result in the compressed
kernel's startup code in head_{32,64}.S overwriting the initrd.
To prevent this, unconditionally relocate the kernel if the EFI stub was
entered via the handover entry point.
3ee372ccce4d ("x86/boot/compressed/64: Remove .bss/.pgtable from bzImage")
removed the .bss section from the bzImage.
However, while a PE loader is required to zero-initialize the .bss
section before calling the PE entry point, the EFI handover protocol
does not currently document any requirement that .bss be initialized by
the bootloader prior to calling the handover entry.
When systemd-boot is used to boot a unified kernel image [1], the image
is constructed by embedding the bzImage as a .linux section in a PE
executable that contains a small stub loader from systemd together with
additional sections and potentially an initrd. As the .bss section
within the bzImage is no longer explicitly present as part of the file,
it is not initialized before calling the EFI handover entry.
Furthermore, as the size of the embedded .linux section is only the size
of the bzImage file itself, the .bss section's memory may not even have
been allocated.
In particular, this can result in efi_disable_pci_dma being true even
when it was not specified via the command line or configuration option,
which in turn causes crashes while booting on some systems.
To avoid issues, place all EFI stub global variables into the .data
section instead of .bss. As of this writing, only boolean flags for a
few command line arguments and the sys_table pointer were in .bss and
will now move into the .data section.
Colin Ian King [Thu, 9 Apr 2020 13:04:27 +0000 (15:04 +0200)]
efi/libstub/x86: Remove redundant assignment to pointer hdr
The pointer hdr is being assigned a value that is never read and
it is being updated later with a new value. The assignment is
redundant and can be removed.
efi/cper: Use scnprintf() for avoiding potential buffer overflow
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
which is due to error injection (or allocation failure) preventing the
rings from being setup. On shutdown, we attempt to remove any pending
requests, and for poll request, we call io_cqring_ev_posted() when we've
killed poll requests. However, since the rings aren't setup, we won't
find any poll requests. Make the calling of io_cqring_ev_posted()
dependent on actually having completed requests. This fixes this setup
corner case, and removes spurious calls if we remove poll requests and
don't find any.
Ashutosh Dixit [Wed, 8 Apr 2020 23:42:01 +0000 (16:42 -0700)]
drm/i915/perf: Do not clear pollin for small user read buffers
It is wrong to block the user thread in the next poll when OA data is
already available which could not fit in the user buffer provided in
the previous read. In several cases the exact user buffer size is not
known. Blocking user space in poll can lead to data loss when the
buffer size used is smaller than the available data.
This change fixes this issue and allows user space to read all OA data
even when using a buffer size smaller than the available data using
multiple non-blocking reads rather than staying blocked in poll till
the next timer interrupt.
v2: Fix ret value for blocking reads (Umesh)
v3: Mistake during patch send (Ashutosh)
v4: Remove -EAGAIN from comment (Umesh)
v5: Improve condition for clearing pollin and return (Lionel)
v6: Improve blocking read loop and other cleanups (Lionel)
v7: Added Cc stable
ALSA: hda: Allow setting preallocation again for x86
The commit c31427d0d21e ("ALSA: hda: No preallocation on x86
platforms") changed CONFIG_SND_HDA_PREALLOC_SIZE setup and its default
to zero for x86, as the preallocation should work almost all cases.
However, this expectation was too naive; some applications try to
allocate as the max buffer size as possible, and it leads to the
memory exhaustion. More badly, the commit changed the kconfig no
longer adjustable for x86, so you can't fix it statically (although it
can be still adjusted via procfs).
So, practically seen, it's more recommended to set a reasonable limit
for x86, too. This patch follows to that experience, and changes the
default to 2048 and allow the kconfig adjustable again.
NFS: Fix an ABBA spinlock issue in pnfs_update_layout()
We need to drop the inode spinlock while calling nfs4_select_rw_stateid(),
since nfs4_copy_delegation_stateid() could take the delegation lock.
Note that it is safe to do this, since all other calls to
pnfs_update_layout() for that inode will find themselves blocked by
the lock we hold on NFS_LAYOUT_FIRST_LAYOUTGET.
Fixes: fc51b1cf391d ("NFS: Beware when dereferencing the delegation cred") Signed-off-by: Trond Myklebust <[email protected]>
The __clk_hw_register_fixed_rate_with_accuracy() function (with two '_')
does not exist, and apparently never did:
drivers/clk/clk-asm9260.c: In function 'asm9260_acc_init':
drivers/clk/clk-asm9260.c:279:7: error: implicit declaration of function '__clk_hw_register_fixed_rate_with_accuracy'; did you mean 'clk_hw_register_fixed_rate_with_accuracy'? [-Werror=implicit-function-declaration]
279 | hw = __clk_hw_register_fixed_rate_with_accuracy(NULL, NULL, pll_clk,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| clk_hw_register_fixed_rate_with_accuracy
drivers/clk/clk-asm9260.c:279:5: error: assignment to 'struct clk_hw *' from 'int' makes pointer from integer without a cast [-Werror=int-conversion]
279 | hw = __clk_hw_register_fixed_rate_with_accuracy(NULL, NULL, pll_clk,
| ^
From what I can tell, __clk_hw_register_fixed_rate() is the correct
API here, so use that instead.
The cleanup in commit 630f289b7114c0e6 ("asm-generic: make more
kernel-space headers mandatory") did not take into account the recently
added line for hardirq.h in commit acc45648b9aefa90 ("m68k: Switch to
asm-generic/hardirq.h"), leading to the following message during the
build:
scripts/Makefile.asm-generic:25: redundant generic-y found in arch/m68k/include/asm/Kbuild: hardirq.h
Bodo Stroesser [Thu, 9 Apr 2020 10:10:26 +0000 (12:10 +0200)]
scsi: target: tcmu: reset_ring should reset TCMU_DEV_BIT_BROKEN
In case command ring buffer becomes inconsistent, tcmu sets device flag
TCMU_DEV_BIT_BROKEN. If the bit is set, tcmu rejects new commands from LIO
core with TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE, and no longer processes
completions from the ring. The reset_ring attribute can be used to
completely clean up the command ring, so after reset_ring the ring no
longer is inconsistent.
Therefore reset_ring also should reset bit TCMU_DEV_BIT_BROKEN to allow
normal processing.
Bodo Stroesser [Wed, 8 Apr 2020 13:26:10 +0000 (15:26 +0200)]
scsi: target: fix PR IN / READ FULL STATUS for FC
Creation of the response to READ FULL STATUS fails for FC based
reservations. Reason is the too high loop limit (< 24) in
fc_get_pr_transport_id(). The string representation of FC WWPN is 23 chars
long only ("11:22:33:44:55:66:77:88"). So when i is 23, the loop body is
executed a last time for the ending '\0' of the string and thus hex2bin()
reports an error.
Bodo Stroesser [Wed, 8 Apr 2020 13:26:09 +0000 (15:26 +0200)]
scsi: target: Write NULL to *port_nexus_ptr if no ISID
This patch fixes a minor flaw that could be triggered by a PR OUT RESERVE
on iSCSI, if TRANSPORT IDs with and without ISID are used in the same
command. In case an ISCSI Transport ID has no ISID, port_nexus_ptr was not
used to write NULL, so value from previous call might persist. I don't
know if that ever could happen, but with the change the code is cleaner, I
think.
drivers/scsi/qla2xxx/qla_dbg.c:2542:7: warning: The scope of the variable 'pbuf'
can be reduced. [variableScope]
drivers/scsi/qla2xxx/qla_init.c:3615:6: warning: Variable 'rc' is assigned a
value that is never used. [unreadVariable]
drivers/scsi/qla2xxx/qla_isr.c:81:11-29: WARNING: dma_alloc_coherent use in
rsp_els already zeroes out memory, so memset is not needed
drivers/scsi/qla2xxx/qla_mbx.c:4889:15-33: WARNING: dma_alloc_coherent use in
els_cmd_map already zeroes out memory, so memset is not needed
Jeff Layton [Wed, 8 Apr 2020 12:41:38 +0000 (08:41 -0400)]
ceph: fix potential bad pointer deref in async dirops cb's
The new async dirops callback routines can pass ERR_PTR values to
ceph_mdsc_free_path, which could cause an oops. Make ceph_mdsc_free_path
ignore ERR_PTR values. Also, ensure that the pr_warn messages look sane
even if ceph_mdsc_build_path fails.
drivers/scsi/hisi_sas/hisi_sas_main.o: In function
`hisi_sas_fill_ata_reset_cmd': hisi_sas_main.c:(.text+0x2500): undefined
reference to `ata_tf_to_fis'
io_uring: check for need to re-wait in polled async handling
We added this for just the regular poll requests in commit a6ba632d2c24
("io_uring: retry poll if we got woken with non-matching mask"), we
should do the same for the poll handler used pollable async requests.
Move the re-wait check and arm into a helper, and call it from
io_async_task_func() as well.
The HD-audio controller does system-suspend and resume operations by
directly calling its helpers __azx_runtime_suspend() and
__azx_runtime_resume(). However, in general, we don't have to resume
always the device fully at the system resume; typically, if a device
has been runtime-suspended, we can leave it to runtime resume.
Usually for achieving this, the driver would call
pm_runtime_force_suspend() and pm_runtime_force_resume() pairs in the
system suspend and resume ops. Unfortunately, this doesn't work for
the resume path in our case. For handling the jack detection at the
system resume, a child codec device may need the (literally) forcibly
resume even if it's been runtime-suspended, and for that, the
controller device must be also resumed even if it's been suspended.
This patch is an attempt to improve the situation. It replaces the
direct __azx_runtime_suspend()/_resume() calls with with
pm_runtime_force_suspend() and pm_runtime_force_resume() with a slight
trick as we've done for the codec side. More exactly:
- azx_has_pm_runtime() check is dropped from azx_runtime_suspend() and
azx_runtime_resume(), so that it can be properly executed from the
system-suspend/resume path
- The WAKEEN handling depends on the card's power state now; it's set
and cleared only for the runtime-suspend
- azx_resume() checks whether any codec may need the forcible resume
beforehand. If the forcible resume is required, it does temporary
PM refcount up/down for actually triggering the runtime resume.
- A new helper function, hda_codec_need_resume(), is introduced for
checking whether the codec needs a forcible runtime-resume, and the
existing code is rewritten with that.
ALSA: hda: Keep the controller initialization even if no codecs found
Currently, when the HD-audio controller driver doesn't detect any
codecs, it tries to abort the probe. But this abort happens at the
delayed probe, i.e. the primary probe call already returned success,
hence the driver is never unbound until user does so explicitly.
As a result, it may leave the HD-audio device in the running state
without the runtime PM. More badly, if the device is a HD-audio bus
that is tied with a GPU, GPU cannot reach to the full power down and
consumes unnecessarily much power.
This patch changes the logic after no-codec situation; it continues
probing without the further codec initialization but keep the
controller driver running normally.
ALSA: hda: Release resources at error in delayed probe
snd-hda-intel driver handles the most of its probe task in the delayed
work (either via workqueue or via firmware loader). When an error
happens in the later delayed probe, we can't deregister the device
itself because the probe callback already returned success and the
device was bound. So, for now, we set hda->init_failed flag and make
the rest untouched until the device gets really unbound.
However, this leaves the device up running, keeping the resources
without any use that prevents other operations.
In this patch, we release the resources at first when a probe error
happens in the delayed probe stage, but keeps the top-level object, so
that the PM and other ops can still refer to the object itself.
Also for simplicity, snd_hda_intel object is allocated via devm, so
that we can get rid of the explicit kfree calls.
ALSA: hda: Honor PM disablement in PM freeze and thaw_noirq ops
freeze_noirq and thaw_noirq need to check the PM availability like
other PM ops. There are cases where the device got disabled due to
the error, and the PM operation should be ignored for that.
ALSA: hda: Don't release card at firmware loading error
At the error path of the firmware loading error, the driver tries to
release the card object and set NULL to drvdata. This may be referred
badly at the possible PM action, as the driver itself is still bound
and the PM callbacks read the card object.
Instead, we continue the probing as if it were no option set. This is
often a better choice than the forced abort, too.
Darrick J. Wong [Sun, 12 Apr 2020 20:11:11 +0000 (13:11 -0700)]
xfs: fix partially uninitialized structure in xfs_reflink_remap_extent
In the reflink extent remap function, it turns out that uirec (the block
mapping corresponding only to the part of the passed-in mapping that got
unmapped) was not fully initialized. Specifically, br_state was not
being copied from the passed-in struct to the uirec. This could lead to
unpredictable results such as the reflinked mapping being marked
unwritten in the destination file.
Brian Foster [Sun, 12 Apr 2020 20:11:10 +0000 (13:11 -0700)]
xfs: acquire superblock freeze protection on eofblocks scans
The filesystem freeze sequence in XFS waits on any background
eofblocks or cowblocks scans to complete before the filesystem is
quiesced. At this point, the freezer has already stopped the
transaction subsystem, however, which means a truncate or cowblock
cancellation in progress is likely blocked in transaction
allocation. This results in a deadlock between freeze and the
associated scanner.
Fix this problem by holding superblock write protection across calls
into the block reapers. Since protection for background scans is
acquired from the workqueue task context, trylock to avoid a similar
deadlock between freeze and blocking on the write lock.
David Howells [Sat, 11 Apr 2020 07:50:45 +0000 (08:50 +0100)]
afs: Fix afs_d_validate() to set the right directory version
If a dentry's version is somewhere between invalid_before and the current
directory version, we should be setting it forward to the current version,
not backwards to the invalid_before version. Note that we're only doing
this at all because dentry::d_fsdata isn't large enough on a 32-bit system.
Fix this by using a separate variable for invalid_before so that we don't
accidentally clobber the current dir version.
Fixes: a4ff7401fbfa ("afs: Keep track of invalid-before version for dentry coherency") Signed-off-by: David Howells <[email protected]>
David Howells [Fri, 10 Apr 2020 14:23:27 +0000 (15:23 +0100)]
afs: Fix race between post-modification dir edit and readdir/d_revalidate
AFS directories are retained locally as a structured file, with lookup
being effected by a local search of the file contents. When a modification
(such as mkdir) happens, the dir file content is modified locally rather
than redownloading the directory.
The directory contents are accessed in a number of ways, with a number of
different locks schemes:
(1) Download of contents - dvnode->validate_lock/write in afs_read_dir().
(2) Lookup and readdir - dvnode->validate_lock/read in afs_dir_iterate(),
downgrading from (1) if necessary.
(3) d_revalidate of child dentry - dvnode->validate_lock/read in
afs_do_lookup_one() downgrading from (1) if necessary.
(4) Edit of dir after modification - page locks on individual dir pages.
Unfortunately, because (4) uses different locking scheme to (1) - (3),
nothing protects against the page being scanned whilst the edit is
underway. Even download is not safe as it doesn't lock the pages - relying
instead on the validate_lock to serialise as a whole (the theory being that
directory contents are treated as a block and always downloaded as a
block).
Fix this by write-locking dvnode->validate_lock around the edits. Care
must be taken in the rename case as there may be two different dirs - but
they need not be locked at the same time. In any case, once the lock is
taken, the directory version must be rechecked, and the edit skipped if a
later version has been downloaded by revalidation (there can't have been
any local changes because the VFS holds the inode lock, but there can have
been remote changes).
Fixes: 63a4681ff39c ("afs: Locally edit directory data for mkdir/create/unlink/...") Signed-off-by: David Howells <[email protected]>
David Howells [Wed, 1 Apr 2020 22:32:12 +0000 (23:32 +0100)]
afs: Fix length of dump of bad YFSFetchStatus record
Fix the length of the dump of a bad YFSFetchStatus record. The function
was copied from the AFS version, but the YFS variant contains bigger fields
and extra information, so expand the dump to match.
David Howells [Wed, 8 Apr 2020 19:56:20 +0000 (20:56 +0100)]
afs: Fix rename operation status delivery
The afs_deliver_fs_rename() and yfs_deliver_fs_rename() functions both only
decode the second file status returned unless the parent directories are
different - unfortunately, this means that the xdr pointer isn't advanced
and the volsync record will be read incorrectly in such an instance.
Fix this by always decoding the second status into the second
status/callback block which wasn't being used if the dirs were the same.
The afs_update_dentry_version() calls that update the directory data
version numbers on the dentries can then unconditionally use the second
status record as this will always reflect the state of the destination dir
(the two records will be identical if the destination dir is the same as
the source dir)
Fixes: 260a980317da ("[AFS]: Add "directory write" support.") Fixes: 30062bd13e36 ("afs: Implement YFS support in the fs client") Signed-off-by: David Howells <[email protected]>
David Howells [Wed, 8 Apr 2020 16:32:10 +0000 (17:32 +0100)]
afs: Fix decoding of inline abort codes from version 1 status records
If we're decoding an AFSFetchStatus record and we see that the version is 1
and the abort code is set and we're expecting inline errors, then we store
the abort code and ignore the remaining status record (which is correct),
but we don't set the flag to say we got a valid abort code.
This can affect operation of YFS.RemoveFile2 when removing a file and the
operation of {,Y}FS.InlineBulkStatus when prospectively constructing or
updating of a set of inodes during a lookup.
Fix this to indicate the reception of a valid abort code.
Fixes: a38a75581e6e ("afs: Fix unlink to handle YFS.RemoveFile2 better") Signed-off-by: David Howells <[email protected]>
David Howells [Wed, 8 Apr 2020 15:13:20 +0000 (16:13 +0100)]
afs: Fix missing XDR advance in xdr_decode_{AFS,YFS}FSFetchStatus()
If we receive a status record that has VNOVNODE set in the abort field,
xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() don't advance
the XDR pointer, thereby corrupting anything subsequent decodes from the
same block of data.
This has the potential to affect AFS.InlineBulkStatus and
YFS.InlineBulkStatus operation, but probably doesn't since the status
records are extracted as individual blocks of data and the buffer pointer
is reset between blocks.
It does affect YFS.RemoveFile2 operation, corrupting the volsync record -
though that is not currently used.
Other operations abort the entire operation rather than returning an error
inline, in which case there is no decoding to be done.
Fix this by unconditionally advancing the xdr pointer.
Fixes: 684b0f68cf1c ("afs: Fix AFSFetchStatus decoder to provide OpenAFS compatibility") Signed-off-by: David Howells <[email protected]>
With OPP core now supporting DVFS for IO devices, we have instances of
IO devices (same IP block) which require an OPP on some platforms/SoCs
while just needing to scale the clock on some others.
In order to avoid conditional code in every driver which supports such
devices (to check for availability of OPPs and then deciding to do
either dev_pm_opp_set_rate() or clk_set_rate()) add support to manage
empty OPP tables with a clk handle.
This makes dev_pm_opp_set_rate() equivalent of a clk_set_rate() for
devices with just a clk and no OPPs specified, and makes
dev_pm_opp_set_rate(0) bail out without throwing an error.
Ilya Dryomov [Tue, 17 Mar 2020 14:18:48 +0000 (15:18 +0100)]
rbd: don't mess with a page vector in rbd_notify_op_lock()
rbd_notify_op_lock() isn't interested in a notify reply. Instead of
accepting that page vector just to free it, have watch-notify code take
care of it.
Ilya Dryomov [Mon, 16 Mar 2020 16:16:28 +0000 (17:16 +0100)]
rbd: don't test rbd_dev->opts in rbd_dev_image_release()
rbd_dev->opts is used to distinguish between the image that is being
mapped and a parent. However, because we no longer establish watch for
read-only mappings, this test is imprecise and results in unnecessary
rbd_unregister_watch() calls.
Make it consistent with need_watch in rbd_dev_image_probe().
Fixes: b9ef2b8858a0 ("rbd: don't establish watch for read-only mappings") Signed-off-by: Ilya Dryomov <[email protected]> Reviewed-by: Jason Dillaman <[email protected]>
Ilya Dryomov [Mon, 16 Mar 2020 14:52:54 +0000 (15:52 +0100)]
rbd: call rbd_dev_unprobe() after unwatching and flushing notifies
rbd_dev_unprobe() is supposed to undo most of rbd_dev_image_probe(),
including rbd_dev_header_info(), which means that rbd_dev_header_info()
isn't supposed to be called after rbd_dev_unprobe().
However, rbd_dev_image_release() calls rbd_dev_unprobe() before
rbd_unregister_watch(). This is racy because a header update notify
can sneak in:
"rbd unmap" thread ceph-watch-notify worker
rbd_dev_image_release()
rbd_dev_unprobe()
free and zero out header
rbd_watch_cb()
rbd_dev_refresh()
rbd_dev_header_info()
read in header
The same goes for "rbd map" because rbd_dev_image_probe() calls
rbd_dev_unprobe() on errors. In both cases this results in a memory
leak.
Fixes: fd22aef8b47c ("rbd: move rbd_unregister_watch() call into rbd_dev_image_release()") Signed-off-by: Ilya Dryomov <[email protected]> Reviewed-by: Jason Dillaman <[email protected]>
Ilya Dryomov [Fri, 13 Mar 2020 10:20:51 +0000 (11:20 +0100)]
rbd: avoid a deadlock on header_rwsem when flushing notifies
rbd_unregister_watch() flushes notifies and therefore cannot be called
under header_rwsem because a header update notify takes header_rwsem to
synchronize with "rbd map". If mapping an image fails after the watch
is established and a header update notify sneaks in, we deadlock when
erroring out from rbd_dev_image_probe().
Move watch registration and unregistration out of the critical section.
The only reason they were put there was to make header_rwsem management
slightly more obvious.
Fixes: 811c66887746 ("rbd: fix rbd map vs notify races") Signed-off-by: Ilya Dryomov <[email protected]> Reviewed-by: Jason Dillaman <[email protected]>
Dan Carpenter [Tue, 7 Apr 2020 09:29:35 +0000 (12:29 +0300)]
platform/chrome: cros_ec_sensorhub: Off by one in cros_sensorhub_send_sample()
The sensorhub->push_data[] array has sensorhub->sensor_num elements.
It's allocated in cros_ec_sensorhub_ring_add(). So the > should be >=
to prevent a read one element beyond the end of the array.
mptcp_connect/28740 is trying to release lock (sk_lock-AF_INET) at:
[<ffffffff82c15869>] mptcp_poll+0xb9/0x550
but there are no more locks to release!
Call Trace:
lock_release+0x50f/0x750
release_sock+0x171/0x1b0
mptcp_poll+0xb9/0x550
sock_poll+0x157/0x470
? get_net_ns+0xb0/0xb0
do_sys_poll+0x63c/0xdd0
Problem is that __mptcp_tcp_fallback() releases the mptcp socket lock,
but after recent change it doesn't do this in all of its return paths.
To fix this, remove the unlock from __mptcp_tcp_fallback() and
always do the unlock in the caller.
Also add a small comment as to why we have this
__mptcp_needs_tcp_fallback().
net: tun: record RX queue in skb before do_xdp_generic()
This allows netif_receive_generic_xdp() to correctly determine the RX
queue from which the skb is coming, so that the context passed to the
XDP program will contain the correct RX queue index.
io_uring: correct O_NONBLOCK check for splice punt
The splice file punt check uses file->f_mode to check for O_NONBLOCK,
but it should be checking file->f_flags. This leads to punting even
for files that have O_NONBLOCK set, which isn't necessary. This equates
to checking for FMODE_PATH, which will never be set on the fd in
question.
Jason Yan [Thu, 9 Apr 2020 08:45:02 +0000 (16:45 +0800)]
hwmon: (k10temp) make some symbols static
Fix the following sparse warning:
drivers/hwmon/k10temp.c:189:12: warning: symbol 'k10temp_temp_label' was
not declared. Should it be static?
drivers/hwmon/k10temp.c:202:12: warning: symbol 'k10temp_in_label' was
not declared. Should it be static?
drivers/hwmon/k10temp.c:207:12: warning: symbol 'k10temp_curr_label' was
not declared. Should it be static?
hwmon: (drivetemp) Return -ENODATA for invalid temperatures
Holger Hoffstätte observed that Samsung 850 Pro may return invalid
temperatures for a short period of time after resume. Return -ENODATA
to userspace if this is observed.
Fixes: 5b46903d8bf3 ("hwmon: Driver for disk and solid state drives with temperature sensors") Reported-by: Holger Hoffstätte <[email protected]> Cc: Holger Hoffstätte <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
Ann T Ropea [Mon, 6 Apr 2020 23:55:21 +0000 (01:55 +0200)]
hwmon: (drivetemp) Use drivetemp's true module name in Kconfig section
The addition of the support for reading the temperature of ATA drives as
per commit 5b46903d8bf3 ("hwmon: Driver for disk and solid state drives
with temperature sensors") lists in the respective Kconfig section the
name of the module to be optionally built as "satatemp".
However, building the kernel modules with "CONFIG_SENSORS_DRIVETEMP=m",
does not generate a file named "satatemp.ko".
Instead, the rest of the original commit uses the term "drivetemp" and
a file named "drivetemp.ko" ends up in the kernel's modules directory.
This file has the right ingredients:
$ strings /path/to/drivetemp.ko | grep ^description
description=Hard drive temperature monitor
I2C chip IDs need to reflect chip names, not chip functionality.
Fixes: f621d61fd59f ("hwmon: (pmbus) add support for 2nd Gen Renesas digital multiphase") Cc: Grant Peltier <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
projects / linux.git / log