Eric Whitney [Fri, 23 Aug 2019 03:22:14 +0000 (23:22 -0400)]
ext4: rework reserved cluster accounting when invalidating pages
The goal of this patch is to remove two references to the buffer delay
bit in ext4_da_page_release_reservation() as part of a larger effort
to remove all such references from ext4. These two references are
principally used to reduce the reserved block/cluster count when pages
are invalidated as a result of truncating, punching holes, or
collapsing a block range in a file. The entire function is removed
and replaced with code in ext4_es_remove_extent() that reduces the
reserved count as a side effect of removing a block range from delayed
and not unwritten extents in the extent status tree as is done when
truncating, punching holes, or collapsing ranges.
The code is written to minimize the number of searches descending from
rb tree roots for scalability.
Ayush Ranjan [Fri, 23 Aug 2019 03:18:33 +0000 (23:18 -0400)]
ext4: documentation fixes
This commit aims to fix the following issues in ext4 documentation:
- Flexible block group docs said that the aim was to group block
metadata together instead of block group metadata.
- The documentation consistly uses "location" instead of "block number".
It is easy to confuse location to be an absolute offset on disk. Added
a line to clarify all location values are in terms of block numbers.
- Dirent2 docs said that the rec_len field is shortened instead of the
name_len field.
- Typo in bg_checksum description.
- Inode size is 160 bytes now, and hence i_extra_isize is now 32.
- Cluster size formula was incorrect, it did not include the +10 to
s_log_cluster_size value.
- Typo: there were two s_wtime_hi in the superblock struct.
- Superblock struct was outdated, added the new fields which were part
of s_reserved earlier.
- Multiple mount protection seems to be implemented in fs/ext4/mmp.c.
ZhangXiaoxu [Fri, 23 Aug 2019 03:00:32 +0000 (23:00 -0400)]
ext4: treat buffers with write errors as containing valid data
I got some errors when I repair an ext4 volume which stacked by an
iscsi target:
Entry 'test60' in / (2) has deleted/unused inode 73750. Clear?
It can be reproduced when the network not good enough.
When I debug this I found ext4 will read entry buffer from disk and
the buffer is marked with write_io_error.
If the buffer is marked with write_io_error, it means it already
wroten to journal, and not checked out to disk. IOW, the journal
is newer than the data in disk.
If this journal record 'delete test60', it means the 'test60' still
on the disk metadata.
In this case, if we read the buffer from disk successfully and create
file continue, the new journal record will overwrite the journal
which record 'delete test60', then the entry corruptioned.
So, use the buffer rather than read from disk if the buffer is marked
with write_io_error.
Really enable warning when CONFIG_EXT4_DEBUG is set and fix missing
first argument. This was introduced in commit ff95ec22cd7f ("ext4:
add warning to ext4_convert_unwritten_extents_endio") and splitting
extents inside endio would trigger it.
Colin Ian King [Mon, 12 Aug 2019 18:29:38 +0000 (14:29 -0400)]
ext4: set error return correctly when ext4_htree_store_dirent fails
Currently when the call to ext4_htree_store_dirent fails the error return
variable 'ret' is is not being set to the error code and variable count is
instead, hence the error code is not being returned. Fix this by assigning
ret to the error return code.
Addresses-Coverity: ("Unused value") Fixes: 8af0f0822797 ("ext4: fix readdir error in the case of inline_data+dir_index") Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Theodore Ts'o <[email protected]>
Theodore Ts'o [Mon, 12 Aug 2019 17:44:49 +0000 (13:44 -0400)]
ext4: drop legacy pre-1970 encoding workaround
Originally, support for expanded timestamps had a bug in that pre-1970
times were erroneously encoded as being in the the 24th century. This
was fixed in commit a4dad1ae24f8 ("ext4: Fix handling of extended
tv_sec") which landed in 4.4. Starting with 4.4, pre-1970 timestamps
were correctly encoded, but for backwards compatibility those
incorrectly encoded timestamps were mapped back to the pre-1970 dates.
Given that backwards compatibility workaround has been around for 4
years, and given that running e2fsck from e2fsprogs 1.43.2 and later
will offer to fix these timestamps (which has been released for 3
years), it's past time to drop the legacy workaround from the kernel.
Theodore Ts'o [Sun, 11 Aug 2019 20:32:41 +0000 (16:32 -0400)]
ext4: add new ioctl EXT4_IOC_GET_ES_CACHE
For debugging reasons, it's useful to know the contents of the extent
cache. Since the extent cache contains much of what is in the fiemap
ioctl, use an fiemap-style interface to return this information.
The warning happens because flush_descriptor() drops bh reference it
does not own. The bh reference acquired by
jbd2_journal_get_descriptor_buffer() is owned by the log_bufs list and
gets released when this list is processed. The reference for doing IO is
only acquired in write_dirty_buffer() later in flush_descriptor().
Shi Siyuan [Sun, 11 Aug 2019 20:28:41 +0000 (16:28 -0400)]
ext4: remove unnecessary error check
Remove unnecessary error check in ext4_file_write_iter(),
because this check will be done in upcoming later function --
ext4_write_checks() -> generic_write_checks()
The above script will trigger "WARN_ON(!io_end->handle && sbi->s_journal)"
because ext4_should_dioread_nolock() returns false for a file with inline
data. Move the check to a place after we have already removed the inline
data and prepared inode to write normal pages.
Linus Torvalds [Sun, 11 Aug 2019 20:15:10 +0000 (13:15 -0700)]
Merge tag 'dax-fixes-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull dax fixes from Dan Williams:
"A filesystem-dax and device-dax fix for v5.3.
The filesystem-dax fix is tagged for stable as the implementation has
been mistakenly throwing away all cow pages on any truncate or hole
punch operation as part of the solution to coordinate device-dma vs
truncate to dax pages.
The device-dax change fixes up a regression this cycle from the
introduction of a common 'internal per-cpu-ref' implementation.
Summary:
- Fix dax_layout_busy_page() to not discard private cow pages of
fs/dax private mappings.
- Update the memremap_pages core to properly cleanup on behalf of
internal reference-count users like device-dax"
* tag 'dax-fixes-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
mm/memremap: Fix reuse of pgmap instances with internal references
dax: dax_layout_busy_page() should not unmap cow pages
Linus Torvalds [Sat, 10 Aug 2019 23:31:47 +0000 (16:31 -0700)]
Merge tag 'riscv/for-v5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
"A few minor RISC-V updates for v5.3-rc4:
- Remove __udivdi3() from the 32-bit Linux port, converting the only
upstream user to use do_div(), per Linux policy
- Convert the RISC-V standard clocksource away from per-cpu data
structures, since only one is used by Linux, even on a multi-CPU
system
- A set of DT binding updates that remove an obsolete text binding in
favor of a YAML binding, fix a bogus compatible string in the
schema (thus fixing a "make dtbs_check" warning), and clarifies the
future values expected in one of the RISC-V CPU properties"
* tag 'riscv/for-v5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
dt-bindings: riscv: fix the schema compatible string for the HiFive Unleashed board
dt-bindings: riscv: remove obsolete cpus.txt
RISC-V: Remove udivdi3
riscv: delay: use do_div() instead of __udivdi3()
dt-bindings: Update the riscv,isa string description
RISC-V: Remove per cpu clocksource
Linus Torvalds [Sat, 10 Aug 2019 23:24:03 +0000 (16:24 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A few fixes for x86:
- Don't reset the carefully adjusted build flags for the purgatory
and remove the unwanted flags instead. The 'reset all' approach led
to build fails under certain circumstances.
- Unbreak CLANG build of the purgatory by avoiding the builtin
memcpy/memset implementations.
- Address missing prototype warnings by including the proper header
- Fix yet more fall-through issues"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/lib/cpu: Address missing prototypes warning
x86/purgatory: Use CFLAGS_REMOVE rather than reset KBUILD_CFLAGS
x86/purgatory: Do not use __builtin_memcpy and __builtin_memset
x86: mtrr: cyrix: Mark expected switch fall-through
x86/ptrace: Mark expected switch fall-through
Linus Torvalds [Sat, 10 Aug 2019 23:19:02 +0000 (16:19 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf tooling fixes from Thomas Gleixner:
"Perf tooling fixes all over the place:
- Fix the selection of the main thread COMM in db-export
- Fix the disassemmbly display for BPF in annotate
- Fix cpumap mask setup in perf ftrace when only one CPU is present
- Add the missing 'cpu_clk_unhalted.core' event
- Fix CPU 0 bindings in NUMA benchmarks
- Fix the module size calculations for s390
- Handle the gap between kernel end and module start on s390
correctly
- Build and typo fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf pmu-events: Fix missing "cpu_clk_unhalted.core" event
perf annotate: Fix s390 gap between kernel end and module start
perf record: Fix module size on s390
perf tools: Fix include paths in ui directory
perf tools: Fix a typo in a variable name in the Documentation Makefile
perf cpumap: Fix writing to illegal memory in handling cpumap mask
perf ftrace: Fix failure to set cpumask when only one cpu is present
perf db-export: Fix thread__exec_comm()
perf annotate: Fix printing of unaugmented disassembled instructions from BPF
perf bench numa: Fix cpu0 binding
Linus Torvalds [Sat, 10 Aug 2019 22:48:02 +0000 (15:48 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"Three fixlets for the scheduler:
- Avoid double bandwidth accounting in the push & pull code
- Use a sane FIFO priority for the Pressure Stall Information (PSI)
thread.
- Avoid permission checks when setting the scheduler params for the
PSI thread"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/psi: Do not require setsched permission from the trigger creator
sched/psi: Reduce psimon FIFO priority
sched/deadline: Fix double accounting of rq/running bw in push & pull
Linus Torvalds [Sat, 10 Aug 2019 22:46:25 +0000 (15:46 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A small fix for the affinity spreading code.
It failed to handle situations where a single vector was requested
either due to only one CPU being available or vector exhaustion
causing only a single interrupt to be granted.
The fix is to simply remove the requirement in the affinity spreading
code for more than one interrupt being available"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/affinity: Create affinity mask for single vector
Joe Perches [Mon, 5 Aug 2019 22:11:15 +0000 (15:11 -0700)]
Makefile: Convert -Wimplicit-fallthrough=3 to just -Wimplicit-fallthrough for clang
A compilation -Wimplicit-fallthrough warning was enabled by commit a035d552a93b ("Makefile: Globally enable fall-through warning")
Even though clang 10.0.0 does not currently support this warning without
a patch, clang currently does not support a value for this option.
Link: https://bugs.llvm.org/show_bug.cgi?id=39382
The gcc default for this warning is 3 so removing the =3 has no effect
for gcc and enables the warning for patched versions of clang.
Also remove the =3 from an existing use in a parisc Makefile:
arch/parisc/math-emu/Makefile
Linus Torvalds [Sat, 10 Aug 2019 19:24:20 +0000 (12:24 -0700)]
Merge tag 'char-misc-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes Greg KH:
"Here are some small char/misc driver fixes for 5.3-rc4.
Two of these are for the habanalabs driver for issues found when
running on a big-endian system (are they still alive?) The others are
tiny fixes reported by people, and a MAINTAINERS update about the
location of the fpga development tree.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
coresight: Fix DEBUG_LOCKS_WARN_ON for uninitialized attribute
MAINTAINERS: Move linux-fpga tree to new location
nvmem: Use the same permissions for eeprom as for nvmem
habanalabs: fix host memory polling in BE architecture
habanalabs: fix F/W download in BE architecture
Linus Torvalds [Sat, 10 Aug 2019 19:20:02 +0000 (12:20 -0700)]
Merge tag 'driver-core-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two small fixes for some driver core issues that have been
reported. There is also a kernfs "fix" here, which was then reverted
because it was found to cause problems in linux-next.
The driver core fixes both resolve reported issues, one with gpioint
stuff that showed up in 5.3-rc1, and the other finally (and hopefully)
resolves a very long standing race when removing glue directories.
It's nice to get that issue finally resolved and the developers
involved should be applauded for the persistence it took to get this
patch finally accepted.
All of these have been in linux-next for a while with no reported
issues. Well, the one reported issue, hence the revert :)"
* tag 'driver-core-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Revert "kernfs: fix memleak in kernel_ops_readdir()"
kernfs: fix memleak in kernel_ops_readdir()
driver core: Fix use-after-free and double free on glue directory
driver core: platform: return -ENXIO for missing GpioInt
Linus Torvalds [Sat, 10 Aug 2019 19:17:12 +0000 (12:17 -0700)]
Merge tag 'tty-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty fix from Greg KH:
"Here is a single tty kgdb fix for 5.3-rc4.
It fixes an annoying log message that has caused kdb to become
useless. It's another fallout from commit ddde3c18b700 ("vt: More
locking checks") which tries to enforce locking checks more strictly
in the tty layer, unfortunatly when kdb is stopped, there's no need
for locks :)
This patch has been linux-next for a while with no reported issues"
* tag 'tty-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
kgdboc: disable the console lock when in kgdb
Linus Torvalds [Sat, 10 Aug 2019 18:59:57 +0000 (11:59 -0700)]
Merge tag 'usb-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 5.3-rc4.
The "biggest" one here is moving code from one file to another in
order to fix a long-standing race condition with the creation of sysfs
files for USB devices. Turns out that there are now userspace tools
out there that are hitting this long-known bug, so it's time to fix
them. Thankfully the tool-maker in this case fixed the issue :)
The other patches in here are all fixes for reported issues. Now that
syzbot knows how to fuzz USB drivers better, and is starting to now
fuzz the userspace facing side of them at the same time, there will be
more and more small fixes like these coming, which is a good thing.
All of these have been in linux-next with no reported issues"
* tag 'usb-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: setup authorized_default attributes using usb_bus_notify
usb: iowarrior: fix deadlock on disconnect
Revert "USB: rio500: simplify locking"
usb: usbfs: fix double-free of usb memory upon submiturb error
usb: yurex: Fix use-after-free in yurex_delete
usb: typec: tcpm: Ignore unsupported/unknown alternate mode requests
xhci: Fix NULL pointer dereference at endpoint zero reset.
usb: host: xhci-rcar: Fix timeout in xhci_suspend()
usb: typec: ucsi: ccg: Fix uninitilized symbol error
usb: typec: tcpm: remove tcpm dir if no children
usb: typec: tcpm: free log buf memory when remove debug file
usb: typec: tcpm: Add NULL check before dereferencing config
Linus Torvalds [Sat, 10 Aug 2019 17:21:25 +0000 (10:21 -0700)]
Merge tag 'pinctrl-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Delay acquisition of regmaps in the Aspeed G5 driver.
- Make a symbol static to reduce compiler noise.
* tag 'pinctrl-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: aspeed: Make aspeed_pinmux_ips static
pinctrl: aspeed-g5: Delay acquisition of regmaps
Linus Torvalds [Sat, 10 Aug 2019 17:17:19 +0000 (10:17 -0700)]
Merge tag 'powerpc-5.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"Just one fix, a revert of a commit that was meant to be a minor
improvement to some inline asm, but ended up having no real benefit
with GCC and broke booting 32-bit machines when using Clang.
Thanks to: Arnd Bergmann, Christophe Leroy, Nathan Chancellor, Nick
Desaulniers, Segher Boessenkool"
* tag 'powerpc-5.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
Revert "powerpc: slightly improve cache helpers"
Linus Torvalds [Sat, 10 Aug 2019 17:10:33 +0000 (10:10 -0700)]
Merge tag 'Wimplicit-fallthrough-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull fall-through fixes from Gustavo A. R. Silva:
"Mark more switch cases where we are expecting to fall through, fixing
fall-through warnings in arm, sparc64, mips, i386 and s390"
* tag 'Wimplicit-fallthrough-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
ARM: ep93xx: Mark expected switch fall-through
scsi: fas216: Mark expected switch fall-throughs
pcmcia: db1xxx_ss: Mark expected switch fall-throughs
video: fbdev: omapfb_main: Mark expected switch fall-throughs
watchdog: riowd: Mark expected switch fall-through
s390/net: Mark expected switch fall-throughs
crypto: ux500/crypt: Mark expected switch fall-throughs
watchdog: wdt977: Mark expected switch fall-through
watchdog: scx200_wdt: Mark expected switch fall-through
watchdog: Mark expected switch fall-throughs
ARM: signal: Mark expected switch fall-through
mfd: omap-usb-host: Mark expected switch fall-throughs
mfd: db8500-prcmu: Mark expected switch fall-throughs
ARM: OMAP: dma: Mark expected switch fall-throughs
ARM: alignment: Mark expected switch fall-throughs
ARM: tegra: Mark expected switch fall-through
ARM/hw_breakpoint: Mark expected switch fall-throughs
Linus Torvalds [Sat, 10 Aug 2019 03:31:04 +0000 (20:31 -0700)]
Merge tag 'kbuild-fixes-v5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- revive single target %.ko
- do not create built-in.a where it is unneeded
- do not create modules.order where it is unneeded
- show a warning if subdir-y/m is used to visit a module Makefile
* tag 'kbuild-fixes-v5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: show hint if subdir-y/m is used to visit module Makefile
kbuild: generate modules.order only in directories visited by obj-y/m
kbuild: fix false-positive need-builtin calculation
kbuild: revive single target %.ko
Mark switch cases where we are expecting to fall through.
Fix the following warnings (Building: arm-ep93xx_defconfig arm):
arch/arm/mach-ep93xx/crunch.c: In function 'crunch_do':
arch/arm/mach-ep93xx/crunch.c:46:3: warning: this statement may
fall through [-Wimplicit-fallthrough=]
memset(crunch_state, 0, sizeof(*crunch_state));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/arm/mach-ep93xx/crunch.c:53:2: note: here
case THREAD_NOTIFY_EXIT:
^~~~
Notice that, in this particular case, the code comment is
modified in accordance with what GCC is expecting to find.
Mark switch cases where we are expecting to fall through.
Fix the following warnings (Building: rpc_defconfig arm):
drivers/scsi/arm/fas216.c: In function ‘fas216_disconnect_intr’:
drivers/scsi/arm/fas216.c:913:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (fas216_get_last_msg(info, info->scsi.msgin_fifo) == ABORT) {
^
drivers/scsi/arm/fas216.c:919:2: note: here
default: /* huh? */
^~~~~~~
drivers/scsi/arm/fas216.c: In function ‘fas216_kick’:
drivers/scsi/arm/fas216.c:1959:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
fas216_allocate_tag(info, SCpnt);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/arm/fas216.c:1960:2: note: here
case TYPE_OTHER:
^~~~
drivers/scsi/arm/fas216.c: In function ‘fas216_busservice_intr’:
drivers/scsi/arm/fas216.c:1413:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
fas216_stoptransfer(info);
^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/arm/fas216.c:1414:2: note: here
case STATE(STAT_STATUS, PHASE_SELSTEPS):/* Sel w/ steps -> Status */
^~~~
drivers/scsi/arm/fas216.c:1424:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
fas216_stoptransfer(info);
^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/arm/fas216.c:1425:2: note: here
case STATE(STAT_MESGIN, PHASE_COMMAND): /* Command -> Message In */
^~~~
drivers/scsi/arm/fas216.c: In function ‘fas216_funcdone_intr’:
drivers/scsi/arm/fas216.c:1573:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if ((stat & STAT_BUSMASK) == STAT_MESGIN) {
^
drivers/scsi/arm/fas216.c:1579:2: note: here
default:
^~~~~~~
drivers/scsi/arm/fas216.c: In function ‘fas216_handlesync’:
drivers/scsi/arm/fas216.c:605:20: warning: this statement may fall through [-Wimplicit-fallthrough=]
info->scsi.phase = PHASE_MSGOUT_EXPECT;
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
drivers/scsi/arm/fas216.c:607:2: note: here
case async:
^~~~
pcmcia: db1xxx_ss: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings (Building: db1xxx_defconfig mips):
drivers/pcmcia/db1xxx_ss.c:257:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/pcmcia/db1xxx_ss.c:269:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
video: fbdev: omapfb_main: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warning (Building: omap1_defconfig arm):
drivers/watchdog/wdt285.c:170:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/watchdog/ar7_wdt.c:237:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:449:23: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:1549:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:1547:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:1545:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:1543:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:1540:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:1538:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:1535:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
watchdog: riowd: Mark expected switch fall-through
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings (Building: sparc64):
drivers/watchdog/riowd.c: In function ‘riowd_ioctl’:
drivers/watchdog/riowd.c:136:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
riowd_writereg(p, riowd_timeout, WDTO_INDEX);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/watchdog/riowd.c:139:2: note: here
case WDIOC_GETTIMEOUT:
^~~~
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings (Building: s390):
drivers/s390/net/ctcm_fsms.c: In function ‘ctcmpc_chx_attnbusy’:
drivers/s390/net/ctcm_fsms.c:1703:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (grp->changed_side == 1) {
^
drivers/s390/net/ctcm_fsms.c:1707:2: note: here
case MPCG_STATE_XID0IOWAIX:
^~~~
drivers/s390/net/ctcm_mpc.c: In function ‘ctc_mpc_alloc_channel’:
drivers/s390/net/ctcm_mpc.c:358:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (callback)
^
drivers/s390/net/ctcm_mpc.c:360:2: note: here
case MPCG_STATE_XID0IOWAIT:
^~~~
drivers/s390/net/ctcm_mpc.c: In function ‘mpc_action_timeout’:
drivers/s390/net/ctcm_mpc.c:1469:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if ((fsm_getstate(rch->fsm) == CH_XID0_PENDING) &&
^
drivers/s390/net/ctcm_mpc.c:1472:2: note: here
default:
^~~~~~~
drivers/s390/net/ctcm_mpc.c: In function ‘mpc_send_qllc_discontact’:
drivers/s390/net/ctcm_mpc.c:2087:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (grp->estconnfunc) {
^
drivers/s390/net/ctcm_mpc.c:2092:2: note: here
case MPCG_STATE_FLOWC:
^~~~
drivers/s390/net/qeth_l2_main.c: In function ‘qeth_l2_process_inbound_buffer’:
drivers/s390/net/qeth_l2_main.c:328:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (IS_OSN(card)) {
^
drivers/s390/net/qeth_l2_main.c:337:3: note: here
default:
^~~~~~~
crypto: ux500/crypt: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warning (Building: arm):
drivers/crypto/ux500/cryp/cryp.c: In function ‘cryp_save_device_context’:
drivers/crypto/ux500/cryp/cryp.c:316:16: warning: this statement may fall through [-Wimplicit-fallthrough=]
ctx->key_4_r = readl_relaxed(&src_reg->key_4_r);
drivers/crypto/ux500/cryp/cryp.c:318:2: note: here
case CRYP_KEY_SIZE_192:
^~~~
drivers/crypto/ux500/cryp/cryp.c:320:16: warning: this statement may fall through [-Wimplicit-fallthrough=]
ctx->key_3_r = readl_relaxed(&src_reg->key_3_r);
drivers/crypto/ux500/cryp/cryp.c:322:2: note: here
case CRYP_KEY_SIZE_128:
^~~~
drivers/crypto/ux500/cryp/cryp.c:324:16: warning: this statement may fall through [-Wimplicit-fallthrough=]
ctx->key_2_r = readl_relaxed(&src_reg->key_2_r);
drivers/crypto/ux500/cryp/cryp.c:326:2: note: here
default:
^~~~~~~
In file included from ./include/linux/io.h:13:0,
from drivers/crypto/ux500/cryp/cryp_p.h:14,
from drivers/crypto/ux500/cryp/cryp.c:15:
drivers/crypto/ux500/cryp/cryp.c: In function ‘cryp_restore_device_context’:
./arch/arm/include/asm/io.h:92:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
#define __raw_writel __raw_writel
^
./arch/arm/include/asm/io.h:299:29: note: in expansion of macro ‘__raw_writel’
#define writel_relaxed(v,c) __raw_writel((__force u32) cpu_to_le32(v),c)
^~~~~~~~~~~~
drivers/crypto/ux500/cryp/cryp.c:363:3: note: in expansion of macro ‘writel_relaxed’
writel_relaxed(ctx->key_4_r, ®->key_4_r);
^~~~~~~~~~~~~~
drivers/crypto/ux500/cryp/cryp.c:365:2: note: here
case CRYP_KEY_SIZE_192:
^~~~
In file included from ./include/linux/io.h:13:0,
from drivers/crypto/ux500/cryp/cryp_p.h:14,
from drivers/crypto/ux500/cryp/cryp.c:15:
./arch/arm/include/asm/io.h:92:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
#define __raw_writel __raw_writel
^
./arch/arm/include/asm/io.h:299:29: note: in expansion of macro ‘__raw_writel’
#define writel_relaxed(v,c) __raw_writel((__force u32) cpu_to_le32(v),c)
^~~~~~~~~~~~
drivers/crypto/ux500/cryp/cryp.c:367:3: note: in expansion of macro ‘writel_relaxed’
writel_relaxed(ctx->key_3_r, ®->key_3_r);
^~~~~~~~~~~~~~
drivers/crypto/ux500/cryp/cryp.c:369:2: note: here
case CRYP_KEY_SIZE_128:
^~~~
In file included from ./include/linux/io.h:13:0,
from drivers/crypto/ux500/cryp/cryp_p.h:14,
from drivers/crypto/ux500/cryp/cryp.c:15:
./arch/arm/include/asm/io.h:92:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
#define __raw_writel __raw_writel
^
./arch/arm/include/asm/io.h:299:29: note: in expansion of macro ‘__raw_writel’
#define writel_relaxed(v,c) __raw_writel((__force u32) cpu_to_le32(v),c)
^~~~~~~~~~~~
drivers/crypto/ux500/cryp/cryp.c:371:3: note: in expansion of macro ‘writel_relaxed’
writel_relaxed(ctx->key_2_r, ®->key_2_r);
^~~~~~~~~~~~~~
drivers/crypto/ux500/cryp/cryp.c:373:2: note: here
default:
^~~~~~~
watchdog: wdt977: Mark expected switch fall-through
Mark switch cases where we are expecting to fall through.
This patch fixes the following warning (Building: arm):
drivers/watchdog/wdt977.c: In function ‘wdt977_ioctl’:
LD [M] drivers/media/platform/vicodec/vicodec.o
drivers/watchdog/wdt977.c:400:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
wdt977_keepalive();
^~~~~~~~~~~~~~~~~~
drivers/watchdog/wdt977.c:403:2: note: here
case WDIOC_GETTIMEOUT:
^~~~
watchdog: scx200_wdt: Mark expected switch fall-through
Mark switch cases where we are expecting to fall through.
This patch fixes the following warning (Building: i386):
drivers/watchdog/scx200_wdt.c: In function ‘scx200_wdt_ioctl’:
drivers/watchdog/scx200_wdt.c:188:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
scx200_wdt_ping();
^~~~~~~~~~~~~~~~~
drivers/watchdog/scx200_wdt.c:189:2: note: here
case WDIOC_GETTIMEOUT:
^~~~
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings:
drivers/watchdog/ar7_wdt.c: warning: this statement may fall
through [-Wimplicit-fallthrough=]: => 237:3
drivers/watchdog/pcwd.c: warning: this statement may fall
through [-Wimplicit-fallthrough=]: => 653:3
drivers/watchdog/sb_wdog.c: warning: this statement may fall
through [-Wimplicit-fallthrough=]: => 204:3
drivers/watchdog/wdt.c: warning: this statement may fall
through [-Wimplicit-fallthrough=]: => 391:3
Mark switch cases where we are expecting to fall through.
This patch fixes the following warning:
arch/arm/kernel/signal.c: In function 'do_signal':
arch/arm/kernel/signal.c:598:12: warning: this statement may fall through [-Wimplicit-fallthrough=]
restart -= 2;
~~~~~~~~^~~~
arch/arm/kernel/signal.c:599:3: note: here
case -ERESTARTNOHAND:
^~~~
mfd: omap-usb-host: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings:
drivers/mfd/omap-usb-host.c: In function 'usbhs_runtime_resume':
drivers/mfd/omap-usb-host.c:303:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (!IS_ERR(omap->hsic480m_clk[i])) {
^
drivers/mfd/omap-usb-host.c:313:3: note: here
case OMAP_EHCI_PORT_MODE_TLL:
^~~~
drivers/mfd/omap-usb-host.c: In function 'usbhs_runtime_suspend':
drivers/mfd/omap-usb-host.c:345:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (!IS_ERR(omap->hsic480m_clk[i]))
^
drivers/mfd/omap-usb-host.c:349:3: note: here
case OMAP_EHCI_PORT_MODE_TLL:
^~~~
mfd: db8500-prcmu: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings:
drivers/mfd/db8500-prcmu.c: In function 'dsiclk_rate':
drivers/mfd/db8500-prcmu.c:1592:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
div *= 2;
~~~~^~~~
drivers/mfd/db8500-prcmu.c:1593:2: note: here
case PRCM_DSI_PLLOUT_SEL_PHI_2:
^~~~
drivers/mfd/db8500-prcmu.c:1594:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
div *= 2;
~~~~^~~~
drivers/mfd/db8500-prcmu.c:1595:2: note: here
case PRCM_DSI_PLLOUT_SEL_PHI:
^~~~
ARM: OMAP: dma: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings:
arch/arm/plat-omap/dma.c: In function 'omap_set_dma_src_burst_mode':
arch/arm/plat-omap/dma.c:384:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (dma_omap2plus()) {
^
arch/arm/plat-omap/dma.c:393:2: note: here
case OMAP_DMA_DATA_BURST_16:
^~~~
arch/arm/plat-omap/dma.c:394:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (dma_omap2plus()) {
^
arch/arm/plat-omap/dma.c:402:2: note: here
default:
^~~~~~~
arch/arm/plat-omap/dma.c: In function 'omap_set_dma_dest_burst_mode':
arch/arm/plat-omap/dma.c:473:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (dma_omap2plus()) {
^
arch/arm/plat-omap/dma.c:481:2: note: here
default:
^~~~~~~
Notice that, in this particular case, the code comment is
modified in accordance with what GCC is expecting to find.
ARM: alignment: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings:
arch/arm/mm/alignment.c: In function 'thumb2arm':
arch/arm/mm/alignment.c:688:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if ((tinstr & (3 << 9)) == 0x0400) {
^
arch/arm/mm/alignment.c:700:2: note: here
default:
^~~~~~~
arch/arm/mm/alignment.c: In function 'do_alignment_t32_to_handler':
arch/arm/mm/alignment.c:753:15: warning: this statement may fall through [-Wimplicit-fallthrough=]
poffset->un = (tinst2 & 0xff) << 2;
~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
arch/arm/mm/alignment.c:754:2: note: here
case 0xe940:
^~~~
Mark switch cases where we are expecting to fall through.
This patch fixes the following warning:
arch/arm/mach-tegra/reset.c: In function 'tegra_cpu_reset_handler_enable':
arch/arm/mach-tegra/reset.c:72:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
tegra_cpu_reset_handler_set(reset_address);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/arm/mach-tegra/reset.c:74:2: note: here
case 0:
^~~~
ARM/hw_breakpoint: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings:
arch/arm/kernel/hw_breakpoint.c: In function 'hw_breakpoint_arch_parse':
arch/arm/kernel/hw_breakpoint.c:609:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (hw->ctrl.len == ARM_BREAKPOINT_LEN_2)
^
arch/arm/kernel/hw_breakpoint.c:611:2: note: here
case 3:
^~~~
arch/arm/kernel/hw_breakpoint.c:613:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (hw->ctrl.len == ARM_BREAKPOINT_LEN_1)
^
arch/arm/kernel/hw_breakpoint.c:615:2: note: here
default:
^~~~~~~
arch/arm/kernel/hw_breakpoint.c: In function 'arch_build_bp_info':
arch/arm/kernel/hw_breakpoint.c:544:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if ((hw->ctrl.type != ARM_BREAKPOINT_EXECUTE)
^
arch/arm/kernel/hw_breakpoint.c:547:2: note: here
default:
^~~~~~~
In file included from include/linux/kernel.h:11,
from include/linux/list.h:9,
from include/linux/preempt.h:11,
from include/linux/hardirq.h:5,
from arch/arm/kernel/hw_breakpoint.c:16:
arch/arm/kernel/hw_breakpoint.c: In function 'hw_breakpoint_pending':
include/linux/compiler.h:78:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
# define unlikely(x) __builtin_expect(!!(x), 0)
^~~~~~~~~~~~~~~~~~~~~~~~~~
include/asm-generic/bug.h:136:2: note: in expansion of macro 'unlikely'
unlikely(__ret_warn_on); \
^~~~~~~~
arch/arm/kernel/hw_breakpoint.c:863:3: note: in expansion of macro 'WARN'
WARN(1, "Asynchronous watchpoint exception taken. Debugging results may be unreliable\n");
^~~~
arch/arm/kernel/hw_breakpoint.c:864:2: note: here
case ARM_ENTRY_SYNC_WATCHPOINT:
^~~~
arch/arm/kernel/hw_breakpoint.c: In function 'core_has_os_save_restore':
arch/arm/kernel/hw_breakpoint.c:910:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (oslsr & ARM_OSLSR_OSLM0)
^
arch/arm/kernel/hw_breakpoint.c:912:2: note: here
default:
^~~~~~~
Linus Torvalds [Fri, 9 Aug 2019 22:46:29 +0000 (15:46 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Bugfixes (arm and x86) and cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
selftests: kvm: Adding config fragments
KVM: selftests: Update gitignore file for latest changes
kvm: remove unnecessary PageReserved check
KVM: arm/arm64: vgic: Reevaluate level sensitive interrupts on enable
KVM: arm: Don't write junk to CP15 registers on reset
KVM: arm64: Don't write junk to sysregs on reset
KVM: arm/arm64: Sync ICH_VMCR_EL2 back when about to block
x86: kvm: remove useless calls to kvm_para_available
KVM: no need to check return value of debugfs_create functions
KVM: remove kvm_arch_has_vcpu_debugfs()
KVM: Fix leak vCPU's VMCS value into other pCPU
KVM: Check preempted_in_kernel for involuntary preemption
KVM: LAPIC: Don't need to wakeup vCPU twice afer timer fire
arm64: KVM: hyp: debug-sr: Mark expected switch fall-through
KVM: arm64: Update kvm_arm_exception_class and esr_class_str for new EC
KVM: arm: vgic-v3: Mark expected switch fall-through
arm64: KVM: regmap: Fix unexpected switch fall-through
KVM: arm/arm64: Introduce kvm_pmu_vcpu_init() to setup PMU counter index
Given that the setup path initializes pgmap->ref, arrange for it to be
also torn down so devm_memremap_pages() is ready to be called again and
not be mistaken for the 3rd-party per-cpu-ref case.
Masahiro Yamada [Thu, 8 Aug 2019 11:21:11 +0000 (20:21 +0900)]
kbuild: show hint if subdir-y/m is used to visit module Makefile
Since commit ff9b45c55b26 ("kbuild: modpost: read modules.order instead
of $(MODVERDIR)/*.mod"), a module is no longer built in the following
pattern:
[Makefile]
subdir-y := some-module
[some-module/Makefile]
obj-m := some-module.o
You cannot write Makefile this way in upstream because modules.order is
not correctly generated. subdir-y is used to descend to a sub-directory
that builds tools, device trees, etc.
For external modules, the modules order does not matter. So, the
Makefile above was known to work.
I believe the Makefile should be re-written as follows:
[Makefile]
obj-m := some-module/
[some-module/Makefile]
obj-m := some-module.o
However, people will have no idea if their Makefile suddenly stops
working. In fact, I received questions from multiple people.
Show a warning for a while if obj-m is specified in a Makefile visited
by subdir-y or subdir-m.
I touched the %/ rule to avoid false-positive warnings for the single
target.
Masahiro Yamada [Tue, 6 Aug 2019 10:03:22 +0000 (19:03 +0900)]
kbuild: generate modules.order only in directories visited by obj-y/m
The modules.order files in directories visited by the chain of obj-y
or obj-m are merged to the upper-level ones, and become parts of the
top-level modules.order. On the other hand, there is no need to
generate modules.order in directories visited by subdir-y or subdir-m
since they would become orphan anyway.
Masahiro Yamada [Fri, 2 Aug 2019 10:23:58 +0000 (19:23 +0900)]
kbuild: revive single target %.ko
I removed the single target %.ko in commit ff9b45c55b26 ("kbuild:
modpost: read modules.order instead of $(MODVERDIR)/*.mod") because
the modpost stage does not work reliably. For instance, the module
dependency, modversion, etc. do not work if we lack symbol information
from the other modules.
Yet, some people still want to build only one module in their interest,
and it may be still useful if it is used within those limitations.
Fixes: ff9b45c55b26 ("kbuild: modpost: read modules.order instead of $(MODVERDIR)/*.mod") Reported-by: Don Brace <[email protected]> Reported-by: Arend Van Spriel <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
amdgpu:
- fix VCN to handle the latest navi10 firmware
- fix for fan control on navi10
- properly handle SMU metrics table on navi10
- fix a resume regression on Stoney
- kfd revert a GWS ioctl
vmwgfx:
- memory leak fix
rockchip:
- suspend fix"
* tag 'drm-fixes-2019-08-09' of git://anongit.freedesktop.org/drm/drm:
drm/vmwgfx: fix memory leak when too many retries have occurred
Revert "drm/amdkfd: New IOCTL to allocate queue GWS"
Revert "drm/amdgpu: fix transform feedback GDS hang on gfx10 (v2)"
drm/amdgpu: pin the csb buffer on hw init for gfx v8
drm/rockchip: Suspend DP late
drm/i915: Fix wrong escape clock divisor init for GLK
drm/i915: fix possible memory leak in intel_hdcp_auth_downstream()
drm/modes: Fix unterminated strncpy
drm/amd/powerplay: correct navi10 vcn powergate
drm/amd/powerplay: honor hw limit on fetching metrics data for navi10
drm/amd/powerplay: Allow changing of fan_control in smu_v11_0
drm/amd/amdgpu/vcn_v2_0: Move VCN 2.0 specific dec ring test to vcn_v2_0
drm/amd/amdgpu/vcn_v2_0: Mark RB commands as KMD commands
drm/tegra: Fix gpiod_get_from_of_node() regression
Linus Torvalds [Fri, 9 Aug 2019 16:30:00 +0000 (09:30 -0700)]
Merge tag 's390-5.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Map vdso also for statically linked binaries like all other
architectures.
- Fix no .bss usage compile-time check to account common objects with
the help of binutils size tool. Top level Makefile change acked-by
Masahiro.
- A fix to make perf happy with _etext symbol type.
- Fix dump_pagetables which is broken since p*d_offset implementation
change to comply with mm/gup.c expectations.
- Revert memory sharing for diag calls in protected virtualization,
since this is not required after all.
- Couple of other minor code cleanups.
* tag 's390-5.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/vdso: map vdso also for statically linked binaries
s390/build: use size command to perform empty .bss check
kbuild: add OBJSIZE variable for the size tool
s390: put _stext and _etext into .text section
s390/head64: cleanup unused labels
s390/unwind: remove stack recursion warning
s390/setup: adjust start_code of init_mm to _text
s390/mm: fix dump_pagetables top level page table walking
s390/protvirt: avoid memory sharing for diag 308 set/store
Linus Torvalds [Fri, 9 Aug 2019 16:28:18 +0000 (09:28 -0700)]
Merge tag 'for-linus-20190809' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Revert of a bcache patch that caused an oops for some (Coly)
- ata rb532 unused warning fix (Gustavo)
- AoE kernel crash fix (He)
- Error handling fixup for blkdev_get() (Jan)
- libata read/write translation and SFF PIO fix (me)
- Use after free and error handling fix for O_DIRECT fragments. There's
still a nowait + sync oddity in there, we'll nail that start next
week. If all else fails, I'll queue a revert of the NOWAIT change.
(me)
- Two BFQ regression fixes that caused crashes (Paolo)
* tag 'for-linus-20190809' of git://git.kernel.dk/linux-block:
bcache: Revert "bcache: use sysfs_match_string() instead of __sysfs_match_string()"
loop: set PF_MEMALLOC_NOIO for the worker thread
bdev: Fixup error handling in blkdev_get()
block, bfq: handle NULL return value by bfq_init_rq()
block, bfq: move update of waker and woken list to queue freeing
block, bfq: reset last_completed_rq_bfqq if the pointed queue is freed
block: aoe: Fix kernel crash due to atomic sleep when exiting
libata: add SG safety checks in SFF pio transfers
libata: have ata_scsi_rw_xlat() fail invalid passthrough requests
block: fix O_DIRECT error handling for bio fragments
ata: rb532_cf: Fix unused variable warning in rb532_pata_driver_probe
Linus Torvalds [Fri, 9 Aug 2019 16:26:47 +0000 (09:26 -0700)]
Merge tag 'mmc-v5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- cavium: Fix DMA support
- sdhci-sprd: Fix soft reset when runtime resuming"
* tag 'mmc-v5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: cavium: Add the missing dma unmap when the dma has finished.
mmc: cavium: Set the correct dma max segment size for mmc_host
mmc: sdhci-sprd: Fix the incorrect soft reset operation when runtime resuming
Linus Torvalds [Fri, 9 Aug 2019 16:24:49 +0000 (09:24 -0700)]
Merge tag 'fbdev-v5.3-rc4' of git://github.com/bzolnier/linux
Pull fbdev fix from Bartlomiej Zolnierkiewicz:
"fbdev patches will now go to upstream through drm-misc tree for
improved maintainership and better integration testing so update
MAINTAINERS file accordingly"
* tag 'fbdev-v5.3-rc4' of git://github.com/bzolnier/linux:
MAINTAINERS: handle fbdev changes through drm-misc tree
Linus Torvalds [Fri, 9 Aug 2019 16:23:23 +0000 (09:23 -0700)]
Merge tag 'pwm/for-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm fix from Thierry Reding:
"A single fix for a backlight brightness regression introduced in
this merge window"
* tag 'pwm/for-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: Fallback to the static lookup-list when acpi_pwm_get fails
Linus Torvalds [Fri, 9 Aug 2019 16:18:36 +0000 (09:18 -0700)]
Merge tag 'pm-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Revert a recent PCI power management change that caused problems to
occur on multiple systems (Mika Westerberg)"
* tag 'pm-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "PCI: Add missing link delays required by the PCIe spec"
Linus Torvalds [Fri, 9 Aug 2019 16:17:05 +0000 (09:17 -0700)]
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"Fix a number of bugs in the ccp driver"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ccp - Ignore tag length when decrypting GCM ciphertext
crypto: ccp - Add support for valid authsize values less than 16
crypto: ccp - Fix oops by properly managing allocated structures
It turns out that the current version of gfs2_metadata_walker suffers
from multiple problems that can cause gfs2_hole_size to report an
incorrect size. This will confuse fiemap as well as lseek with the
SEEK_DATA flag.
Fix that by changing gfs2_hole_walker to compute the metapath to the
first data block after the hole (if any), and compute the hole size
based on that.
Paolo Bonzini [Fri, 9 Aug 2019 14:53:50 +0000 (16:53 +0200)]
Merge tag 'kvmarm-fixes-for-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm fixes for 5.3, take #2
- Fix our system register reset so that we stop writing
non-sensical values to them, and track which registers
get reset instead.
- Sync VMCR back from the GIC on WFI so that KVM has an
exact vue of PMR.
- Reevaluate state of HW-mapped, level triggered interrupts
on enable.
MAINTAINERS: handle fbdev changes through drm-misc tree
fbdev patches will now go to upstream through drm-misc tree (IOW
starting with v5.4 merge window fbdev changes will be included in
DRM pull request) for improved maintainership and better integration
testing. Update MAINTAINERS file accordingly.
In drivers/md/bcache/sysfs.c:bch_snprint_string_list(), NULL pointer at
the end of list is necessary. Remove the NULL from last element of each
lists will cause the following panic,
Heiko Carstens [Wed, 7 Aug 2019 12:31:59 +0000 (14:31 +0200)]
s390/vdso: map vdso also for statically linked binaries
s390 does not map the vdso for statically linked binaries, assuming
that this doesn't make sense. See commit fc5243d98ac2 ("[S390]
arch_setup_additional_pages arguments").
However with glibc commit d665367f596d ("linux: Enable vDSO for static
linking as default (BZ#19767)") and commit 5e855c895401 ("s390: Enable
VDSO for static linking") the vdso is also used for statically linked
binaries - if the kernel would make it available.
Therefore map the vdso always, just like all other architectures.
KVM: arm/arm64: vgic: Reevaluate level sensitive interrupts on enable
A HW mapped level sensitive interrupt asserted by a device will not be put
into the ap_list if it is disabled at the VGIC level. When it is enabled
again, it will be inserted into the ap_list and written to a list register
on guest entry regardless of the state of the device.
We could argue that this can also happen on real hardware, when the command
to enable the interrupt reached the GIC before the device had the chance to
de-assert the interrupt signal; however, we emulate the distributor and
redistributors in software and we can do better than that.
Marc Zyngier [Mon, 5 Aug 2019 09:34:51 +0000 (10:34 +0100)]
KVM: arm: Don't write junk to CP15 registers on reset
At the moment, the way we reset CP15 registers is mildly insane:
We write junk to them, call the reset functions, and then check that
we have something else in them.
The "fun" thing is that this can happen while the guest is running
(PSCI, for example). If anything in KVM has to evaluate the state
of a CP15 register while junk is in there, bad thing may happen.
Let's stop doing that. Instead, we track that we have called a
reset function for that register, and assume that the reset
function has done something.
In the end, the very need of this reset check is pretty dubious,
as it doesn't check everything (a lot of the CP15 reg leave outside
of the cp15_regs[] array). It may well be axed in the near future.
Marc Zyngier [Mon, 5 Aug 2019 09:34:51 +0000 (10:34 +0100)]
KVM: arm64: Don't write junk to sysregs on reset
At the moment, the way we reset system registers is mildly insane:
We write junk to them, call the reset functions, and then check that
we have something else in them.
The "fun" thing is that this can happen while the guest is running
(PSCI, for example). If anything in KVM has to evaluate the state
of a system register while junk is in there, bad thing may happen.
Let's stop doing that. Instead, we track that we have called a
reset function for that register, and assume that the reset
function has done something. This requires fixing a couple of
sysreg refinition in the trap table.
In the end, the very need of this reset check is pretty dubious,
as it doesn't check everything (a lot of the sysregs leave outside of
the sys_regs[] array). It may well be axed in the near future.
Paul Walmsley [Thu, 8 Aug 2019 22:36:44 +0000 (15:36 -0700)]
dt-bindings: riscv: fix the schema compatible string for the HiFive Unleashed board
The YAML binding document for SiFive boards has an incorrect
compatible string for the HiFive Unleashed board. Change it to match
the name of the board on the SiFive web site:
https://www.sifive.com/boards/hifive-unleashed
which also matches the contents of the board DT data file:
Palmer Dabbelt [Wed, 7 Aug 2019 00:05:08 +0000 (17:05 -0700)]
RISC-V: Remove udivdi3
This should never have landed in the first place: it was added as part
of 64-bit divide support for 32-bit systems, but the kernel doesn't
allow this sort of division. I must have forgotten to remove it.
This patch removes the support. Since this routine only worked on
64-bit platforms but was only built on 32-bit platforms, it's
essentially just nonsense anyway.
Paul Walmsley [Wed, 7 Aug 2019 01:28:33 +0000 (18:28 -0700)]
riscv: delay: use do_div() instead of __udivdi3()
In preparation for removing __udivdi3() from the RISC-V
architecture-specific files, convert its one user to use do_div().
This avoids breaking the RV32 build after __udivdi3() is removed.
This second version removes the assignment of the remainder to an
unused temporary variable. Thanks to Nicolas Pitre <[email protected]>
for the suggestion.
Atish Patra [Sat, 3 Aug 2019 04:27:23 +0000 (21:27 -0700)]
dt-bindings: Update the riscv,isa string description
Since the RISC-V specification states that ISA description strings are
case-insensitive, there's no functional difference between mixed-case,
upper-case, and lower-case ISA strings. Thus, to simplify parsing,
specify that the letters present in "riscv,isa" must be all lowercase.
Linus Torvalds [Thu, 8 Aug 2019 21:47:19 +0000 (14:47 -0700)]
Merge tag 'nfs-for-5.3-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fixes from Trond Myklebust:
"Highlights include:
Stable fixes:
- NFSv4: Ensure we check the return value of update_open_stateid() so
we correctly track active open state.
- NFSv4: Fix for delegation state recovery to ensure we recover all
open modes that are active.
- NFSv4: Fix an Oops in nfs4_do_setattr
Fixes:
- NFS: Fix regression whereby fscache errors are appearing on 'nofsc'
mounts
- NFSv4: Fix a potential sleep while atomic in nfs4_do_reclaim()
- NFSv4: Fix a credential refcount leak in nfs41_check_delegation_stateid
- pNFS: Report errors from the call to nfs4_select_rw_stateid()
- NFSv4: Various other delegation and open stateid recovery fixes
- NFSv4: Fix state recovery behaviour when server connection times
out"
* tag 'nfs-for-5.3-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4: Ensure state recovery handles ETIMEDOUT correctly
NFS: Fix regression whereby fscache errors are appearing on 'nofsc' mounts
NFSv4: Fix an Oops in nfs4_do_setattr
NFSv4: Fix a potential sleep while atomic in nfs4_do_reclaim()
NFSv4: Check the return value of update_open_stateid()
NFSv4.1: Only reap expired delegations
NFSv4.1: Fix open stateid recovery
NFSv4: Report the error from nfs4_select_rw_stateid()
NFSv4: When recovering state fails with EAGAIN, retry the same recovery
NFSv4: Print an error in the syslog when state is marked as irrecoverable
NFSv4: Fix delegation state recovery
NFSv4: Fix a credential refcount leak in nfs41_check_delegation_stateid
Thomas Gleixner [Thu, 8 Aug 2019 20:12:01 +0000 (22:12 +0200)]
Merge tag 'perf-urgent-for-mingo-5.3-20190808' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
perf/urgent fixes:
db-export:
Adrian Hunter:
- Fix thread__exec_comm() picking of main thread COMM for pre-existing,
synthesized from /proc data records.
annotate:
Arnaldo Carvalho de Melo:
- Fix printing of unaugmented disassembled instructions from BPF, some
lines were leaving leftovers from the previous screen, due to use of
newlines by binutils's libopcode disassembler.
perf ftrace:
He Zhe:
- Fix cpumask problems when only one CPU is present.
PMU events:
Jin Yao:
- Add missing "cpu_clk_unhalted.core" event.
perf bench:
Jiri Olsa:
- Fix cpu0 binding in the NUMA benchmarks.
s390:
Thomas Richter:
- Fix module size calculations.
build system:
Masanari Iida:
- Fix a typo in a variable name in the Documentation Makefile
The events defined in pmu-events JSON are parsed and added into perf
tool. For fixed counters, we handle the encodings between JSON and perf
by using a static array fixed[].
But the fixed[] has missed an important event "cpu_clk_unhalted.core".
For example, on the Tremont platform,
[root@localhost ~]# perf stat -e cpu_clk_unhalted.core -a
event syntax error: 'cpu_clk_unhalted.core'
\___ parser error
With this patch, the event cpu_clk_unhalted.core can be parsed.
[root@localhost perf]# ./perf stat -e cpu_clk_unhalted.core -a -vvv
------------------------------------------------------------
perf_event_attr:
type 4
size 112
config 0x3c
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
exclude_guest 1
------------------------------------------------------------
...
On s390 the kernel is located around memory address 0x200, 0x10000 or
0x100000, depending on linux version. Modules however start some- where
around 0x3ff xxxx xxxx.
This is different than x86 and produces a large gap for which histogram
allocation fails.
Fix this by detecting the kernel's last symbol and do no adjustment for
it. Introduce a weak function and handle s390 specifics.
There is an offset of 0x1990 bytes. The size of the qeth module is
151552 bytes (0x25000 in hex).
The location of the GOT/relocation table at the beginning of a module is
unique to s390.
commit 203d8a4aa6ed ("perf s390: Fix 'start' address of module's map")
adjusts the start address of a module in the map structures, but does
not adjust the size of the modules. This leads to overlapping of module
maps as this example shows:
The module qeth.ko has an adjusted start address modified to b3990, but
its size is unchanged and the module ends at 0x3ff800d8990. This end
address overlaps with the next modules start address of 0x3ff800d85a0.
When the size of the leading GOT/Relocation table stored in the
beginning of the text segment (0x1990 bytes) is subtracted from module
qeth end address, there are no overlaps anymore:
0x3ff800d8990 - 0x1990 = 0x0x3ff800d7000
which is the same as
0x3ff800b2000 + 0x25000 = 0x0x3ff800d7000.
To fix this issue, also adjust the modules size in function
arch__fix_module_text_start(). Add another function parameter named size
and reduce the size of the module when the text segment start address is
changed.
Ian Rogers [Wed, 31 Jul 2019 22:54:41 +0000 (15:54 -0700)]
perf tools: Fix include paths in ui directory
These paths point to the wrong location but still work because they get
picked up by a -I flag that happens to direct to the correct file. Fix
paths to point to the correct location without -I flags.
He Zhe [Fri, 2 Aug 2019 08:29:51 +0000 (16:29 +0800)]
perf ftrace: Fix failure to set cpumask when only one cpu is present
The buffer containing the string used to set cpumask is overwritten at
the end of the string later in cpu_map__snprint_mask due to not enough
memory space, when there is only one cpu.
And thus causes the following failure:
$ perf ftrace ls
failed to reset ftrace
$
This patch fixes the calculation of the cpumask string size.
Adrian Hunter [Thu, 8 Aug 2019 06:48:23 +0000 (09:48 +0300)]
perf db-export: Fix thread__exec_comm()
Threads synthesized from /proc have comms with a start time of zero, and
not marked as "exec". Currently, there can be 2 such comms. The first is
created by processing a synthesized fork event and is set to the
parent's comm string, and the second by processing a synthesized comm
event set to the thread's current comm string.
In the absence of an "exec" comm, thread__exec_comm() picks the last
(oldest) comm, which, in the case above, is the parent's comm string.
For a main thread, that is very probably wrong. Use the second-to-last
in that case.
This affects only db-export because it is the only user of
thread__exec_comm().
Example:
$ sudo perf record -a -o pt-a-sleep-1 -e intel_pt//u -- sleep 1
$ sudo chown ahunter pt-a-sleep-1
perf annotate: Fix printing of unaugmented disassembled instructions from BPF
The code to disassemble BPF programs uses binutil's disassembling
routines, and those use in turn fprintf to print to a memstream FILE,
adding a newline at the end of each line, which ends up confusing the
TUI routines called from:
The SLsmg_vprintf() function in the slang library gets confused with the
terminating newline, so make the disasm_line__parse() function that
parses the lines produced by the BPF specific disassembler (that uses
binutil's libopcodes) and the lines produced by the objdump based
disassembler used for everything else (and that doesn't adds this
terminating newline) trim the end of the line in addition of the
beginning.
This way when disasm_line->ops.raw, i.e. for instructions without a
special scnprintf() method, we'll not have that \n getting in the way of
filling the screen right after the instruction with spaces to avoid
leaving what was on the screen before and thus garbling the annotation
screen, breaking scrolling, etc.
projects / linux.git / log