Stephan Gerhold [Mon, 25 Oct 2021 10:55:03 +0000 (12:55 +0200)]
ASoC: qcom: common: Respect status = "disabled" on DAI link nodes
At the moment, the DAI link nodes in the device tree always have to be
specified completely in each device tree. However, the available
interfaces (e.g. Primary/Secondary/Tertiary/Quaternary MI2S) are common
for all devices of a SoC, so the majority of the definitions can be
placed in a common device tree include to reduce boilerplate.
Make it possible to define such stubs in device tree includes by
respecting the "status" property for the DAI link nodes. This is
a trivial change that just requires switching to the _available_
OF functions that check the "status" property additionally.
This allows defining a stub like:
sound_dai_quaternary: dai-link-quaternary {
link-name = "Quaternary MI2S";
status = "disabled"; /* Needs extra codec configuration */
cpu {
sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
};
platform {
sound-dai = <&q6routing>;
};
};
where the codec would be filled in by the device-specific device tree.
For existing device trees this change does not make any difference.
A missing "status" property is treated like status = "okay".
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
ASoC: cs42l42: Prevent NULL pointer deref in interrupt handler
The interrupt handling code was getting the struct device* from a
struct snd_soc_component* stored in struct cs42l42_private. If the
interrupt was asserted before ASoC calls component_probe() the
snd_soc_component* will be NULL.
The stored snd_soc_component* is not actually used for anything other
than indirectly getting the struct device*. Remove it, and store the
struct device* in struct cs42l42_private.
Use the existing devm_clk_get_optional() helper instead of building a
similar construct on top of devm_clk_get() that fails to handle all
errors but -EPROBE_DEFER.
This is because SND_SOC_DMIC and SND_SOC_MAX98357A are
selected by SND_SOC_INTEL_DA7219_MAX98357A_GENERIC, which
is also selected by SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH.
However, the selectors do not depend on or select GPIOLIB,
despite SND_SOC_DMIC and SND_SOC_MAX98357A depending on GPIOLIB.
These unmet dependency bugs were detected by Kismet,
a static analysis tool for Kconfig. Please advise if this
is not the appropriate solution.
Uwe Kleine-König [Wed, 20 Oct 2021 13:24:16 +0000 (15:24 +0200)]
ASoC: cs35l41: Make cs35l41_remove() return void
Up to now cs35l41_remove() returns zero unconditionally. Make it
return void instead which makes it easier to see in the callers that
there is no error to handle.
Also the return value of i2c, platform and spi remove callbacks is
ignored anyway.
Dmitry Osipenko [Sun, 24 Oct 2021 19:28:52 +0000 (22:28 +0300)]
ASoC: tegra: Restore AC97 support
The device-tree of AC97 codecs need to be parsed differently from I2S
codecs, plus codec device may need to be created. This was missed by the
patch that unified machine drivers into a single driver, fix it. It should
restore audio on Toradex Colibri board.
John Keeping [Sun, 24 Oct 2021 15:17:31 +0000 (16:17 +0100)]
ASoC: doc: update codec example code
As the codec API has evolved the documentation has not kept up and still
uses old fields that have been removed. Update the examples to
represent the current API.
Mark Brown [Sat, 23 Oct 2021 16:30:02 +0000 (17:30 +0100)]
Merge series "ASoC: Add common modules support for ACP hw block" from Ajit Kumar Pandey <[email protected]>:
changes since v3:
- rebase and fixes merge conflict.
- Fixed kernel autobot warning.
Ajit Kumar Pandey (8):
ASoC: amd: Add common framework to support I2S on ACP SOC
ASoC: amd: acp: Add I2S support on Renoir platform
ASoC: amd: acp: Add callback for machine driver on ACP
ASoC: amd: acp: Add generic machine driver support for ACP cards
ASoC: amd: acp: Add legacy sound card support for Chrome audio
ASoC: amd: acp: Add SOF audio support on Chrome board
ASoC: amd: acp: Add support for Maxim amplifier codec
ASoC: amd: acp: Add support for RT5682-VS codec
Mark Brown [Sat, 23 Oct 2021 16:29:20 +0000 (17:29 +0100)]
Merge series "Add Yellow Carp platform ASoC driver" from Vijendar Mukunda <[email protected]>:
Yellow Carp platform is new APU series based on acp6.x design.
This patch set adds an ASoC driver for the ACP (Audio CoProcessor)
block on AMD Yellow Carp APU with DMIC endpoint support.
changes since v1:
- fixed SPDX commenting style in acp6x pci driver.
- fixed Copyright commenting style in acp6x pci driver,
pdm dma driver and machine driver files.
- fixed local variable check logic in acp6x_power_on() function.
- fixed Kconfig indentation issue
- removed irq_flag local variable in irq handler.
- add dmi info check in machine driver probe
Mark Brown [Sat, 23 Oct 2021 13:32:19 +0000 (14:32 +0100)]
Merge series "ASoC: meson: axg: fix TDM channel order sync" from Jerome Brunet <[email protected]>:
On the Amlogic AXG series, the TODDR FIFO may get out of sync with the TDM
decoder if the decoder is started before the FIFO. The channel appears
shifted in memory in an unpredictable way.
To fix this, the trick is to start the FIFO before the TDM decoder. This
way the FIFO is already waiting when the 1st channel is produced and it is
correctly placed in memory.
Jerome Brunet (2):
ASoC: meson: axg-card: make links nonatomic
ASoC: meson: axg-tdm-interface: manage formatters in trigger
Jerome Brunet [Wed, 20 Oct 2021 11:42:17 +0000 (13:42 +0200)]
ASoC: meson: axg-tdm-interface: manage formatters in trigger
So far, the formatters have been reset/enabled using the .prepare()
callback. This was done in this callback because walking the formatters use
a mutex so it could not be done in .trigger(), which is atomic by default.
It turns out there is a problem on capture path of the AXG series.
The FIFO may get out of sync with the TDM decoder if the IP are not enabled
in a specific order. The FIFO must be enabled before the formatter starts
producing data. IOW, we must deal with FE before the BE. The .prepare()
callback is called on the BEs before the FE so it is not OK for the AXG.
The .trigger() callback order can be configured, and it deals with the FE
before the BEs by default. To solve our problem, we just need to start and
stop the formatters from the .trigger() callback. It is OK do so now that
the links have been made 'nonatomic' in the card driver.
Jerome Brunet [Wed, 20 Oct 2021 11:42:16 +0000 (13:42 +0200)]
ASoC: meson: axg-card: make links nonatomic
Non atomic operations need to be performed in the trigger callback
of the TDM interfaces. Those are BEs but what matters is the nonatomic
flag of the FE in the DPCM context. Just set nonatomic for everything so,
at least, it is clear.
The driver has runtime_suspend and runtime_resume callbacks, but
pm_runtime is never enabled so these functions won't be called. They
could not be used anyway because the runtime_suspend would cause jack
detect to stop working.
This is because SND_SOC_MAX98357A is selected
by SND_SOC_STORM and SND_SOC_SC7180, but
these config options do not select or depend on
GPIOLIB, despite SND_SOC_MAX98357A depending on
GPIOLIB.
These unmet dependency bugs were detected by Kismet,
a static analysis tool for Kconfig. Please advise if this
is not the appropriate solution.
Johnathon Clark [Wed, 20 Oct 2021 13:12:51 +0000 (14:12 +0100)]
ALSA: hda/realtek: Fix mic mute LED for the HP Spectre x360 14
On the 'HP Spectre x360 Convertible 14-ea0xx' the microphone mute led is
controlled by GPIO 0x04. The speaker mute LED does not seem to be
exposed by GPIO and is there not set.
Takashi Iwai [Wed, 20 Oct 2021 16:48:46 +0000 (18:48 +0200)]
ALSA: mixer: oss: Fix racy access to slots
The OSS mixer can reassign the mapping slots dynamically via proc
file. Although the addition and deletion of those slots are protected
by mixer->reg_mutex, the access to slots aren't, hence this may cause
UAF when the slots in use are deleted concurrently.
This patch applies the mixer->reg_mutex in all appropriate code paths
(i.e. the ioctl functions) that may access slots.
In newer variants primary codec is rt5682vs. Add support for newer
codec variants in generic machine driver module and define driver
data to register SOF sound card.
ASoC: amd: acp: Add support for Maxim amplifier codec
In newer chrome boards we have max98360a as an amplifier codec.
Add support for max98360a in generic machine driver and configure
driver data to enable SOF sound card support on newer boards .
ASoC: amd: acp: Add SOF audio support on Chrome board
Chrome board has RT5682 codec and RT1019 amp connected to I2S SP
controller on ACP hw. Also it support DMIC capture endpoints with
inbuilt pdm controller on ACP hw block. Add driver module to create
backend dai links for sof dsp core. We pass driver data with audio
end points configuration to register sound cards and create device
nodes for all audio endpoints.
ASoC: amd: acp: Add legacy sound card support for Chrome audio
Renoir based Chrome board has RT5682 as primary headset codec and
RT1019 amp device connected to I2SSP ACP i2s controller. Add driver
to register legacy sound card devices on Chrome board.
ASoC: amd: acp: Add generic machine driver support for ACP cards
We have machines with different audio endpoints configurations
across various distributions. We need to support multiple sound
cards for different combinations of I2S instance and codecs hw.
Now we also need to support SOF-DSP endpoints based sound cards.
All such card combinations slightly differs in terms of machine
ops callback. This patch adds ACP generic machine driver module
that exposes method to create ACP cards dai links and define new
ops for audio endpoints configurations. Initially we have added
dailink support for RT5682 and RT1019 codec connection with ACP
I2S_SP instance. We will add newer codecs in this module to use
this for all AMD's ACP block sound cards supports in future.
ASoC: amd: Add common framework to support I2S on ACP SOC
We are using legacy way of exposing dais and DMA configuration that
requires separate driver modules for various ACP SOC with almost
similar hw configuration. Moreover the legacy approach requires
separate I2S and DMA module platform devices registration and need
machine specific quirk to control various I2S endpoints. Add generic
dai driver and platform driver for I2S controller on ACP hw block.
This common framework can be used by various ACP platform devices
that shares common specs.
Takashi Iwai [Tue, 19 Oct 2021 06:05:35 +0000 (08:05 +0200)]
ALSA: memalloc: Drop superfluous snd_dma_buffer_sync() declaration
snd_dma_buffer_sync() is declared twice, and the one outside the ifdef
CONFIG_HAS_DMA could lead to a build error when CONFIG_HAS_DMA=n.
As it's an overlooked leftover after rebase, drop this line.
Marco Giunta [Mon, 18 Oct 2021 16:25:52 +0000 (18:25 +0200)]
ALSA: usb-audio: Fix microphone sound on Jieli webcam.
When a Jieli Technology USB Webcam is connected, the video part works
well, but the mic sound is speeded up. On dmesg there are messages
about different rates from the runtime rates, warnings about volume
resolution and lastly, the log is filled, every 5 seconds, with
retire_capture_urb error messages.
The mic works only when ep packet size is set to wMaxPacketSize (normal
sound and no more retire_capture_urb error messages). Skipping reading
sample rate, fixes the messages about different rates and forcing a volume
resolution, fixes warnings about volume range. I have arbitrarily choosed
the value (16): I read in a comment that there should be no more than 255
levels, so 4096 (max volume) / 16 = 0-255.
Vijendar Mukunda [Mon, 18 Oct 2021 11:20:37 +0000 (16:50 +0530)]
ASoC: amd: add acp6x irq handler
Add ACP6x irq handler for handling irq events for ACP IP.
Add pdm irq events handling.
Whenever audio data equal to the PDM watermark level are consumed,
interrupt is generated. Acknowledge the interrupt.
Vijendar Mukunda [Mon, 18 Oct 2021 11:20:36 +0000 (16:50 +0530)]
ASoC: amd: add acp6x pdm platform driver
PDM platform driver binds to the platform device created by
ACP6x PCI device. PDM driver registers ALSA DMA and CPU DAI
components with ASoC framework.
Vijendar Mukunda [Mon, 18 Oct 2021 11:20:35 +0000 (16:50 +0530)]
ASoC: amd: add platform devices for acp6x pdm driver and dmic driver
ACP6.x IP has PDM decoder block.
Create a platform device for it, so that the PDM platform driver
can be bound to this device.
Pass PCI resources like MMIO to this platform device.
Create a platform device for generic dmic codec driver.
Takashi Iwai [Mon, 18 Oct 2021 11:40:35 +0000 (13:40 +0200)]
ALSA: uapi: Fix a C++ style comment in asound.h
UAPI header should have no C++ style comment but only in the
traditional C style comment, but there is still one place we used it
mistakenly. This patch corrects it.
Takashi Iwai [Mon, 18 Oct 2021 06:37:00 +0000 (08:37 +0200)]
ALSA: firewire: Fix C++ style comments in uapi header
UAPI headers are built with -std=c90 and C++ style comments are
explicitly prohibited. The recent commit overlooked the rule and
caused the error at header installation. This patch corrects those.
Fixes: bea36afa102e ("ALSA: firewire-motu: add message parser to gather meter information in register DSP model") Fixes: 90b28f3bb85c ("ALSA: firewire-motu: add message parser for meter information in command DSP model") Fixes: 634ec0b2906e ("ALSA: firewire-motu: notify event for parameter change in register DSP model") Reported-by: Stephen Rothwell <[email protected]> Acked-by: Takashi Sakamoto <[email protected]> Link: https://lore.kernel.org/r/[email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
Tzung-Bi Shih [Mon, 18 Oct 2021 10:16:08 +0000 (18:16 +0800)]
ASoC: dt-bindings: mediatek: rename reset controller headers in DT example
Commit f07c776f6d7e ("arm64: dts: mediatek: Move reset controller
constants into common location") moves the reset controller headers.
However, it forgot to rename the DT example in mt8192-afe-pcm.yaml.
During development of V5 of the i2s-tdm patch series, I replaced
the atomic refcount with a regular integer, as it was only ever
accessed within a spinlock.
Foolishly, I got the semantics of atomic_dec_and_test wrong, which
resulted in a test for 0 actually becoming a test for >0.
The result was that setting the audio frequency broke; switching
from 44100 Hz audio playback to 96000 Hz audio playback would
garble the sound most unpleasantly.
Fix this by checking for --refcount == 0, which is what it should
have been all along.
Uwe Kleine-König [Fri, 15 Oct 2021 07:11:13 +0000 (09:11 +0200)]
ASoC: tlv320aic32x4: Make aic32x4_remove() return void
Up to now aic32x4_remove() returns zero unconditionally. Make it return
void instead which makes it easier to see in the callers that there is
no error to handle.
Also the return value of i2c and spi remove callbacks is ignored anyway.
DAI active count is not exchanged during for_each_rtd_dais()
loops. We don't need to keep snd_soc_dai_stream_active() as
"active" on soc_pcm_hw_clean(). This patch avoid verbose code.
Takashi Iwai [Sun, 17 Oct 2021 07:48:59 +0000 (09:48 +0200)]
ALSA: memalloc: Convert x86 SG-buffer handling with non-contiguous type
We've had an x86-specific SG-buffer handling code, but now it can be
merged gracefully with the standard non-contiguous DMA pages.
After the migration, SNDRV_DMA_TYPE_DMA_SG becomes identical with
SNDRV_DMA_TYPE_NONCONTIG on x86, while others still fall back to
SNDRV_DMA_TYPE_DEV.
The remaining problem is about the SG-buffer with WC pages: the DMA
core stuff on x86 doesn't treat it well, so we still need some special
handling to manipulate the page attribute manually. The mmap handler
for SNDRV_DMA_TYPE_DEV_SG_WC still returns -ENOENT intentionally for
the fallback to the default handler.
Takashi Iwai [Sun, 17 Oct 2021 07:48:58 +0000 (09:48 +0200)]
ALSA: memalloc: Support for non-coherent page allocation
Following to the addition of non-contiguous pages, this patch adds the
new contiguous non-coherent page allocation to the standard memalloc
helper. Like the previous non-contig type, this non-coherent type is
also directional and requires the explicit sync, too. Hence the
driver using this type of buffer may need to set
SNDRV_PCM_INFO_EXPLICIT_SYNC flag to the PCM hardware.info as well,
unless it's set up in the managed mode.
Takashi Iwai [Sun, 17 Oct 2021 07:48:57 +0000 (09:48 +0200)]
ALSA: memalloc: Support for non-contiguous page allocation
This patch adds the support for allocation of non-contiguous DMA pages
in the common memalloc helper. It's another SG-buffer type, but
unlike the existing one, this is directional and requires the explicit
sync / invalidation of dirty pages on non-coherent architectures.
For this enhancement, the following points are changed:
- snd_dma_device stores the DMA direction.
- snd_dma_device stores need_sync flag indicating whether the explicit
sync is required or not.
- A new variant of helper functions, snd_dma_alloc_dir_pages() and
*_all() are introduced; the old snd_dma_alloc_pages() and *_all()
kept as just wrappers with DMA_BIDIRECTIONAL.
- A new helper snd_dma_buffer_sync() is introduced; this gets called
in the appropriate places.
- A new allocation type, SNDRV_DMA_TYPE_NONCONTIG, is introduced.
When the driver allocates pages with this new type, and it may require
the SNDRV_PCM_INFO_EXPLICIT_SYNC flag set to the PCM hardware.info for
taking the full control of PCM applptr and hwptr changes (that implies
disabling the mmap of control/status data). When the buffer
allocation is managed by snd_pcm_set_managed_buffer(), this flag is
automatically set depending on the result of dma_need_sync()
internally. Otherwise, if the buffer is managed manually, the driver
has to set the flag explicitly, too.
The explicit sync between CPU and device for non-coherent memory is
performed at the points before and after read/write transfer as well
as the applptr/hwptr syncptr ioctl. In the case of mmap mode,
user-space is supposed to call the syncptr ioctl with the hwptr flag
to update and fetch the status at first; this corresponds to CPU-sync.
Then user-space advances the applptr via syncptr ioctl again with
applptr flag, and this corresponds to the device sync with flushing.
Other than the DMA direction and the explicit sync, the usage of this
new buffer type is almost equivalent with the existing
SNDRV_DMA_TYPE_DEV_SG; you can get the page and the address via
snd_sgbuf_get_page() and snd_sgbuf_get_addr(), also calculate the
continuous pages via snd_sgbuf_get_chunk_size().
For those SG-page handling, the non-contig type shares the same ops
with the vmalloc handler. As we do always vmap the SG pages at first,
the actual address can be deduced from the vmapped address easily
without iterating the SG-list.
Linus Torvalds [Mon, 18 Oct 2021 05:39:22 +0000 (19:39 -1000)]
Merge tag 'libata-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull libata fixes from Damien Le Moal:
"Two fixes for this cycle:
- Fix a null pointer dereference in ahci-platform driver (from Hai)
- Fix uninitialized variables in pata_legacy driver (from Dan)"
* tag 'libata-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: ahci_platform: fix null-ptr-deref in ahci_platform_enable_regulators()
pata_legacy: fix a couple uninitialized variable bugs
Linus Torvalds [Mon, 18 Oct 2021 05:25:20 +0000 (19:25 -1000)]
Merge tag 'block-5.15-2021-10-17' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Bigger than usual for this point in time, the majority is fixing some
issues around BDI lifetimes with the move from the request_queue to
the disk in this release. In detail:
- Series on draining fs IO for del_gendisk() (Christoph)
- NVMe pull request via Christoph:
- fix the abort command id (Keith Busch)
- nvme: fix per-namespace chardev deletion (Adam Manzanares)
- brd locking scope fix (Tetsuo)
- BFQ fix (Paolo)"
* tag 'block-5.15-2021-10-17' of git://git.kernel.dk/linux-block:
block, bfq: reset last_bfqq_created on group change
block: warn when putting the final reference on a registered disk
brd: reduce the brd_devices_mutex scope
kyber: avoid q->disk dereferences in trace points
block: keep q_usage_counter in atomic mode after del_gendisk
block: drain file system I/O on del_gendisk
block: split bio_queue_enter from blk_queue_enter
block: factor out a blk_try_enter_queue helper
block: call submit_bio_checks under q_usage_counter
nvme: fix per-namespace chardev deletion
block/rnbd-clt-sysfs: fix a couple uninitialized variable bugs
nvme-pci: Fix abort command id
Linus Torvalds [Mon, 18 Oct 2021 04:17:19 +0000 (18:17 -1000)]
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"Fixes up some issues in rc5"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost-vdpa: Fix the wrong input in config_cb
VDUSE: fix documentation underline warning
Revert "virtio-blk: Add validation for block size in config space"
vhost_vdpa: unset vq irq before freeing irq
virtio: write back F_VERSION_1 before validate
Linus Torvalds [Mon, 18 Oct 2021 04:01:32 +0000 (18:01 -1000)]
Merge tag 'powerpc-5.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix a bug where guests on P9 with interrupts passed through could get
stuck in synchronize_irq().
- Fix a bug in KVM on P8 where secondary threads entering a guest would
write outside their allocated stack.
- Fix a bug in KVM on P8 where secondary threads could confuse the host
offline code and cause the guest or host to crash.
Thanks to Cédric Le Goater.
* tag 'powerpc-5.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S HV: Make idle_kvm_start_guest() return 0 if it went to guest
KVM: PPC: Book3S HV: Fix stack handling in idle_kvm_start_guest()
powerpc/xive: Discard disabled interrupts in get_irqchip_state()
Linus Torvalds [Mon, 18 Oct 2021 03:41:39 +0000 (17:41 -1000)]
Merge tag 'objtool_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
- Update section headers before the respective relocations to not
trigger a safety check in elftoolchain's implementation of libelf
- Do not add garbage data to the .rela.orc_unwind_ip section
* tag 'objtool_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Update section header before relocations
objtool: Check for gelf_update_rel[a] failures
Linus Torvalds [Mon, 18 Oct 2021 03:30:49 +0000 (17:30 -1000)]
Merge tag 'efi-urgent-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Borislav Petkov:
"Forwarded from Ard Biesheuvel through the tip tree. Ard will send
stuff directly in the near future.
Low priority fixes but fixes nonetheless:
- update stub diagnostic print that is no longer accurate
- avoid statically allocated buffer for CPER error record decoding
- avoid sleeping on the efi_runtime semaphore when calling the
ResetSystem EFI runtime service"
* tag 'efi-urgent-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Change down_interruptible() in virt_efi_reset_system() to down_trylock()
efi/cper: use stack buffer for error record decoding
efi/libstub: Simplify "Exiting bootservices" message
Linus Torvalds [Mon, 18 Oct 2021 03:27:22 +0000 (17:27 -1000)]
Merge tag 'x86_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Do not enable AMD memory encryption in Kconfig by default due to
shortcomings of some platforms, leading to boot failures.
- Mask out invalid bits in the MXCSR for 32-bit kernels again because
Thomas and I don't know how to mask out bits properly. Third time's
the charm.
* tag 'x86_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Mask out the invalid MXCSR bits properly
x86/Kconfig: Do not enable AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT automatically
Linus Torvalds [Mon, 18 Oct 2021 03:17:28 +0000 (17:17 -1000)]
Merge tag 'driver-core-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core fixes for 5.15-rc6, all of which have
been in linux-next for a while with no reported issues.
They include:
- kernfs negative dentry bugfix
- simple pm bus fixes to resolve reported issues"
* tag 'driver-core-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: bus: Delete CONFIG_SIMPLE_PM_BUS
drivers: bus: simple-pm-bus: Add support for probing simple bus only devices
driver core: Reject pointless SYNC_STATE_ONLY device links
kernfs: don't create a negative dentry if inactive node exists
Linus Torvalds [Mon, 18 Oct 2021 03:10:00 +0000 (17:10 -1000)]
Merge tag 'staging-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO driver fixes from Greg KH:
"Here are a number of small IIO and staging driver fixes for 5.15-rc6.
They include:
- vc04_services bugfix for reported problem
- r8188eu array underflow fix
- iio driver fixes for a lot of tiny reported issues.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8188eu: prevent array underflow in rtw_hal_update_ra_mask()
staging: vc04_services: shut up out-of-range warning
iio: light: opt3001: Fixed timeout error when 0 lux
iio: adis16480: fix devices that do not support sleep mode
iio: mtk-auxadc: fix case IIO_CHAN_INFO_PROCESSED
iio: adis16475: fix deadlock on frequency set
iio: ssp_sensors: add more range checking in ssp_parse_dataframe()
iio: ssp_sensors: fix error code in ssp_print_mcu_debug()
iio: adc: ad7793: Fix IRQ flag
iio: adc: ad7780: Fix IRQ flag
iio: adc: ad7192: Add IRQ flag
iio: adc: aspeed: set driver data when adc probe.
iio: adc: rzg2l_adc: add missing clk_disable_unprepare() in rzg2l_adc_pm_runtime_resume()
iio: adc: max1027: Fix the number of max1X31 channels
iio: adc: max1027: Fix wrong shift with 12-bit devices
iio: adc128s052: Fix the error handling path of 'adc128_probe()'
iio: adc: rzg2l_adc: Fix -EBUSY timeout error return
iio: accel: fxls8962af: return IRQ_HANDLED when fifo is flushed
iio: dac: ti-dac5571: fix an error code in probe()
Linus Torvalds [Mon, 18 Oct 2021 03:06:31 +0000 (17:06 -1000)]
Merge tag 'tty-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fix from Greg KH:
"Here is a single 8250 Kconfig fix for 5.15-rc6 that resolves a
regression that showed up in 5.15-rc1. It has been in linux-next for a
while with no reported issues"
* tag 'tty-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250: allow disabling of Freescale 16550 compile test
Linus Torvalds [Mon, 18 Oct 2021 02:57:06 +0000 (16:57 -1000)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a new product ID for the xpad joystick driver
- fixes to resistive-adc-touch and snvs_pwrkey drivers
- a change to touchscreen helpers to make clang happier
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: touchscreen - avoid bitwise vs logical OR warning
Input: xpad - add support for another USB ID of Nacon GC-100
Input: resistive-adc-touch - fix division by zero error on z1 == 0
Input: snvs_pwrkey - add clk handling
Paolo Valente [Fri, 15 Oct 2021 14:43:36 +0000 (16:43 +0200)]
block, bfq: reset last_bfqq_created on group change
Since commit 430a67f9d616 ("block, bfq: merge bursts of newly-created
queues"), BFQ maintains a per-group pointer to the last bfq_queue
created. If such a queue, say bfqq, happens to move to a different
group, then bfqq is no more a valid last bfq_queue created for its
previous group. That pointer must then be cleared. Not resetting such
a pointer may also cause UAF, if bfqq happens to also be freed after
being moved to a different group. This commit performs this missing
reset. As such it fixes commit 430a67f9d616 ("block, bfq: merge bursts
of newly-created queues").
Such a missing reset is most likely the cause of the crash reported in [1].
With some analysis, we found that this crash was due to the
above UAF. And such UAF did go away with this commit applied [1].
Anyway, before this commit, that crash happened to be triggered in
conjunction with commit 2d52c58b9c9b ("block, bfq: honor already-setup
queue merges"). The latter was then reverted by commit ebc69e897e17
("Revert "block, bfq: honor already-setup queue merges""). Yet commit 2d52c58b9c9b ("block, bfq: honor already-setup queue merges") contains
no error related with the above UAF, and can then be restored.
block: warn when putting the final reference on a registered disk
Warn when the last reference on a live disk is put without calling
del_gendisk first. There are some BDI related bug reports that look
like a case of this, so make sure we have the proper instrumentation
to catch it.
As with commit 8b52d8be86d72308 ("loop: reorder loop_exit"),
unregister_blkdev() needs to be called first in order to avoid calling
brd_alloc() from brd_probe() after brd_del_one() from brd_exit(). Then,
we can avoid holding global mutex during add_disk()/del_gendisk() as with
commit 1c500ad706383f1a ("loop: reduce the loop_ctl_mutex scope").
Randy Dunlap [Sat, 16 Oct 2021 06:26:02 +0000 (23:26 -0700)]
ALSA: ISA: not for M68K
On m68k, compiling drivers under SND_ISA causes build errors:
../sound/core/isadma.c: In function 'snd_dma_program':
../sound/core/isadma.c:33:17: error: implicit declaration of function 'claim_dma_lock' [-Werror=implicit-function-declaration]
33 | flags = claim_dma_lock();
| ^~~~~~~~~~~~~~
../sound/core/isadma.c:41:9: error: implicit declaration of function 'release_dma_lock' [-Werror=implicit-function-declaration]
41 | release_dma_lock(flags);
| ^~~~~~~~~~~~~~~~
../sound/isa/sb/sb16_main.c: In function 'snd_sb16_playback_prepare':
../sound/isa/sb/sb16_main.c:253:72: error: 'DMA_AUTOINIT' undeclared (first use in this function)
253 | snd_dma_program(dma, runtime->dma_addr, size, DMA_MODE_WRITE | DMA_AUTOINIT);
| ^~~~~~~~~~~~
../sound/isa/sb/sb16_main.c:253:72: note: each undeclared identifier is reported only once for each function it appears in
../sound/isa/sb/sb16_main.c: In function 'snd_sb16_capture_prepare':
../sound/isa/sb/sb16_main.c:322:71: error: 'DMA_AUTOINIT' undeclared (first use in this function)
322 | snd_dma_program(dma, runtime->dma_addr, size, DMA_MODE_READ | DMA_AUTOINIT);
| ^~~~~~~~~~~~
ASoC: dt-bindings: rockchip: i2s-tdm: Drop rockchip,cru property
This property was only needed for a driver hack, which we can
remove. Since the bindings were not in any kernel release yet, we
are able to just drop the property instead of silently accepting
and ignoring it.
In cases where both rx and tx lrck are synced to the same source,
the resets for rx and tx need to be triggered simultaneously,
according to the downstream driver.
As there is no reset API to atomically bulk (de)assert two resets
at once, what the driver did was implement half a reset controller
specific to Rockchip, which tried to write the registers for the
resets within one write ideally or several writes within an irqsave
section.
This of course violates abstractions quite badly. The driver should
not write to the CRU's registers directly.
In practice, for the cases I tested the driver with, which is audio
playback, replacing the synchronised asserts with just individual
ones does not seem to make any difference.
If it turns out that this breaks something in the future, it should
be fixed through the specification and implementation of an atomic
bulk reset API, not with a CRU hack.
Linus Torvalds [Sat, 16 Oct 2021 18:11:07 +0000 (11:11 -0700)]
Merge tag 'perf-tools-fixes-for-v5.15-2021-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix 'perf test evsel' build error on !x86 architectures
- Fix libperf's test_stat_cpu mixup of CPU numbers and CPU indexes
- Output offsets for decompressed records, not just useless zeros
* tag 'perf-tools-fixes-for-v5.15-2021-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
libperf tests: Fix test_stat_cpu
libperf test evsel: Fix build error on !x86 architectures
perf report: Output non-zero offset for decompressed records
Linus Torvalds [Sat, 16 Oct 2021 17:51:41 +0000 (10:51 -0700)]
Merge tag 'trace-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Tracing fixes for 5.15:
- Fix defined but not use warning/error for osnoise function
- Fix memory leak in event probe
- Fix memblock leak in bootconfig
- Fix the API of event probes to be like kprobes
- Added test to check removal of event probe API
- Fix recordmcount.pl for nds32 failed build
* tag 'trace-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
nds32/ftrace: Fix Error: invalid operands (*UND* and *UND* sections) for `^'
selftests/ftrace: Update test for more eprobe removal process
tracing: Fix event probe removal from dynamic events
tracing: Fix missing * in comment block
bootconfig: init: Fix memblock leak in xbc_make_cmdline()
tracing: Fix memory leak in eprobe_register()
tracing: Fix missing osnoise tracer on max_latency
Linus Torvalds [Sat, 16 Oct 2021 17:22:08 +0000 (10:22 -0700)]
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk driver fixes from Stephen Boyd:
"Clk driver fixes for critical issues found in the past few weeks:
- Select gdsc config so qcom sm6350 driver probes
- Fix a register offset in qcom gcc-sm6115 so the correct clk is
controlled
- Fix inverted logic in Renesas RZ/G2L .is_enabled()
- Mark some more clks critical in Renesas clk driver
- Remove a duplicate clk in the agilex driver"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: add select QCOM_GDSC for SM6350
clk: qcom: gcc-sm6115: Fix offset for hlos1_vote_turing_mmu_tbu0_gdsc
clk: socfpga: agilex: fix duplicate s2f_user0_clk
clk: renesas: rzg2l: Fix clk status function
clk: renesas: r9a07g044: Mark IA55_CLK and DMAC_ACLK critical
Linus Torvalds [Sat, 16 Oct 2021 16:14:55 +0000 (09:14 -0700)]
Merge tag 's390-5.15-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Maintainers and reviewers changes:
* Cornelia decided to free up her time and step down from vfio-ccw
maintainer and s390 kvm reviewer duties
* Add Alexander Gordeev as s390 arch code reviewer
- Fix broken strrchr implementation
* tag 's390-5.15-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: add Alexander Gordeev as reviewer
s390: fix strrchr() implementation
vfio-ccw: step down as maintainer
KVM: s390: remove myself as reviewer
Linus Torvalds [Sat, 16 Oct 2021 16:12:18 +0000 (09:12 -0700)]
Merge tag 'csky-for-linus-5.15-rc6' of git://github.com/c-sky/csky-linux
Pull csky fixes from Guo Ren:
"Only 5 fixups:
- Make HAVE_TCM depend on !COMPILE_TEST
- bitops: Remove duplicate __clear_bit define
- Select ARCH_WANT_FRAME_POINTERS only if compiler supports it
- Fixup regs.sr broken in ptrace
- don't let sigreturn play with priveleged bits of status register"
* tag 'csky-for-linus-5.15-rc6' of git://github.com/c-sky/csky-linux:
csky: Make HAVE_TCM depend on !COMPILE_TEST
csky: bitops: Remove duplicate __clear_bit define
csky: Select ARCH_WANT_FRAME_POINTERS only if compiler supports it
csky: Fixup regs.sr broken in ptrace
csky: don't let sigreturn play with priveleged bits of status register
projects / linux.git / log