Hou Tao [Tue, 8 Feb 2022 06:54:44 +0000 (14:54 +0800)]
selftests/bpf: Do not export subtest as standalone test
Two subtests in ksyms_module.c are not qualified as static, so these
subtests are exported as standalone tests in tests.h and lead to
confusion for the output of "./test_progs -t ksyms_module".
Joe Damato [Fri, 17 Dec 2021 19:35:18 +0000 (11:35 -0800)]
i40e: Add a stat for tracking pages waived
In some cases, pages can not be reused because they are not associated with
the correct NUMA zone. Knowing how often pages are waived helps users to
understand the interaction between the driver's memory usage and their
system.
Pass rx_stats through to i40e_can_reuse_rx_page to allow tracking when
pages are waived.
NeilBrown [Mon, 17 Jan 2022 05:36:53 +0000 (16:36 +1100)]
SUNRPC: lock against ->sock changing during sysfs read
->sock can be set to NULL asynchronously unless ->recv_mutex is held.
So it is important to hold that mutex. Otherwise a sysfs read can
trigger an oops.
Commit 17f09d3f619a ("SUNRPC: Check if the xprt is connected before
handling sysfs reads") appears to attempt to fix this problem, but it
only narrows the race window.
Fixes: 17f09d3f619a ("SUNRPC: Check if the xprt is connected before handling sysfs reads") Fixes: a8482488a7d6 ("SUNRPC query transport's source port") Signed-off-by: NeilBrown <[email protected]> Signed-off-by: Anna Schumaker <[email protected]>
Add the description of @server and @fhandle, and remove the excess
@inode in nfs4_proc_get_locations() kernel-doc comment to remove
warnings found by running scripts/kernel-doc, which is caused by
using 'make W=1'.
fs/nfs/nfs4proc.c:8219: warning: Function parameter or member 'server'
not described in 'nfs4_proc_get_locations'
fs/nfs/nfs4proc.c:8219: warning: Function parameter or member 'fhandle'
not described in 'nfs4_proc_get_locations'
fs/nfs/nfs4proc.c:8219: warning: Excess function parameter 'inode'
description in 'nfs4_proc_get_locations'
Dan Aloni [Tue, 25 Jan 2022 20:06:46 +0000 (22:06 +0200)]
xprtrdma: fix pointer derefs in error cases of rpcrdma_ep_create
If there are failures then we must not leave the non-NULL pointers with
the error value, otherwise `rpcrdma_ep_destroy` gets confused and tries
free them, resulting in an Oops.
Trond Myklebust [Wed, 2 Feb 2022 23:52:01 +0000 (18:52 -0500)]
NFS: Fix initialisation of nfs_client cl_flags field
For some long forgotten reason, the nfs_client cl_flags field is
initialised in nfs_get_client() instead of being initialised at
allocation time. This quirk was harmless until we moved the call to
nfs_create_rpc_client().
Fixes: dd99e9f98fbf ("NFSv4: Initialise connection to the server in nfs4_alloc_client()") Cc: [email protected] # 4.8.x Signed-off-by: Trond Myklebust <[email protected]> Signed-off-by: Anna Schumaker <[email protected]>
====================
inet: Separate DSCP from ECN bits using new dscp_t type
The networking stack currently doesn't clearly distinguish between DSCP
and ECN bits. The entire DSCP+ECN bits are stored in u8 variables (or
structure fields), and each part of the stack handles them in their own
way, using different macros. This has created several bugs in the past
and some uncommon code paths are still unfixed.
Such bugs generally manifest by selecting invalid routes because of ECN
bits interfering with FIB routes and rules lookups (more details in the
LPC 2021 talk[1] and in the RFC of this series[2]).
This patch series aims at preventing the introduction of such bugs (and
detecting existing ones), by introducing a dscp_t type, representing
"sanitised" DSCP values (that is, with no ECN information), as opposed
to plain u8 values that contain both DSCP and ECN information. dscp_t
makes it clear for the reader what we're working on, and Sparse can
flag invalid interactions between dscp_t and plain u8.
This series converts only a few variables and structures:
* Patch 1 converts the tclass field of struct fib6_rule. It
effectively forbids the use of ECN bits in the tos/dsfield option
of ip -6 rule. Rules now match packets solely based on their DSCP
bits, so ECN doesn't influence the result any more. This contrasts
with the previous behaviour where all 8 bits of the Traffic Class
field were used. It is believed that this change is acceptable as
matching ECN bits wasn't usable for IPv4, so only IPv6-only
deployments could be depending on it. Also the previous behaviour
made DSCP-based ip6-rules fail for packets with both a DSCP and an
ECN mark, which is another reason why any such deploy is unlikely.
* Patch 2 converts the tos field of struct fib4_rule. This one too
effectively forbids defining ECN bits, this time in ip -4 rule.
Before that, setting ECN bit 1 was accepted, while ECN bit 0 was
rejected. But even when accepted, the rule would never match, as
the packets would have their ECN bits cleared before doing the
rule lookup.
* Patch 3 converts the fc_tos field of struct fib_config. This is
equivalent to patch 2, but for IPv4 routes. Routes using a
tos/dsfield option with any ECN bit set is now rejected. Before
this patch, they were accepted but, as with ip4 rules, these routes
couldn't match any packet, since their ECN bits are cleared before
the lookup.
* Patch 4 converts the fa_tos field of struct fib_alias. This one is
pure internal u8 to dscp_t conversion. While patches 1-3 had user
facing consequences, this patch shouldn't have any side effect and
is there to give an overview of what future conversion patches will
look like. Conversions are quite mechanical, but imply some code
churn, which is the price for the extra clarity a possibility of
type checking.
To summarise, all the behaviour changes required for the dscp_t type
approach to work should be contained in patches 1-3. These changes are
edge cases of ip-route and ip-rule that don't currently work properly.
So they should be safe. Also, a kernel selftest is added for each of
them.
Finally, this work also paves the way for allowing the usage of the 3
high order DSCP bits in IPv4 (a few call paths already handle them, but
in general the stack clears them before IPv4 rule and route lookups).
References:
[1] LPC 2021 talk:
- https://linuxplumbersconf.org/event/11/contributions/943/
- Direct link to slide deck:
https://linuxplumbersconf.org/event/11/contributions/943/attachments/901/1780/inet_tos_lpc2021.pdf
[2] RFC version of this series:
- https://lore.kernel.org/netdev/cover.1638814614[email protected]/
====================
Guillaume Nault [Fri, 4 Feb 2022 13:58:19 +0000 (14:58 +0100)]
ipv4: Use dscp_t in struct fib_alias
Use the new dscp_t type to replace the fa_tos field of fib_alias. This
ensures ECN bits are ignored and makes the field compatible with the
fc_dscp field of struct fib_config.
Converting old *tos variables and fields to dscp_t allows sparse to
flag incorrect uses of DSCP and ECN bits. This patch is entirely about
type annotation and shouldn't change any existing behaviour.
Guillaume Nault [Fri, 4 Feb 2022 13:58:16 +0000 (14:58 +0100)]
ipv4: Reject routes specifying ECN bits in rtm_tos
Use the new dscp_t type to replace the fc_tos field of fib_config, to
ensure IPv4 routes aren't influenced by ECN bits when configured with
non-zero rtm_tos.
Before this patch, IPv4 routes specifying an rtm_tos with some of the
ECN bits set were accepted. However they wouldn't work (never match) as
IPv4 normally clears the ECN bits with IPTOS_RT_MASK before doing a FIB
lookup (although a few buggy code paths don't).
After this patch, IPv4 routes specifying an rtm_tos with any ECN bit
set is rejected.
Note: IPv6 routes ignore rtm_tos altogether, any rtm_tos is accepted,
but treated as if it were 0.
Guillaume Nault [Fri, 4 Feb 2022 13:58:14 +0000 (14:58 +0100)]
ipv4: Stop taking ECN bits into account in fib4-rules
Use the new dscp_t type to replace the tos field of struct fib4_rule,
so that fib4-rules consistently ignore ECN bits.
Before this patch, fib4-rules did accept rules with the high order ECN
bit set (but not the low order one). Also, it relied on its callers
masking the ECN bits of ->flowi4_tos to prevent those from influencing
the result. This was brittle and a few call paths still do the lookup
without masking the ECN bits first.
After this patch fib4-rules only compare the DSCP bits. ECN can't
influence the result anymore, even if the caller didn't mask these
bits. Also, fib4-rules now must have both ECN bits cleared or they will
be rejected.
Guillaume Nault [Fri, 4 Feb 2022 13:58:11 +0000 (14:58 +0100)]
ipv6: Define dscp_t and stop taking ECN bits into account in fib6-rules
Define a dscp_t type and its appropriate helpers that ensure ECN bits
are not taken into account when handling DSCP.
Use this new type to replace the tclass field of struct fib6_rule, so
that fib6-rules don't get influenced by ECN bits anymore.
Before this patch, fib6-rules didn't make any distinction between the
DSCP and ECN bits. Therefore, rules specifying a DSCP (tos or dsfield
options in iproute2) stopped working as soon a packets had at least one
of its ECN bits set (as a work around one could create four rules for
each DSCP value to match, one for each possible ECN value).
After this patch fib6-rules only compare the DSCP bits. ECN doesn't
influence the result anymore. Also, fib6-rules now must have the ECN
bits cleared or they will be rejected.
Yannick Vignon [Fri, 4 Feb 2022 13:55:44 +0000 (14:55 +0100)]
net: stmmac: optimize locking around PTP clock reads
Reading the PTP clock is a simple operation requiring only 3 register
reads. Under a PREEMPT_RT kernel, protecting those reads by a spin_lock is
counter-productive: if the 2nd task preempting the 1st has a higher prio
but needs to read time as well, it will require 2 context switches, which
will pretty much always be more costly than just disabling preemption for
the duration of the reads. Moreover, with the code logic recently added
to get_systime(), disabling preemption is not even required anymore:
reads and writes just need to be protected from each other, to prevent a
clock read while the clock is being updated.
Improve the above situation by replacing the PTP spinlock by a rwlock, and
using read_lock for PTP clock reads so simultaneous reads do not block
each other.
It is mandatory for a software to issue a reset upon modifying RGMII
Receive Timing Control and RGMII Transmit Timing Control bit fields of MAC
Specific Control register 2 (page 2, register 21) otherwise the changes
won't be perceived by the PHY (the same is applicable for a lot of other
registers). Not setting the RGMII delays on the platforms that imply it'
being done on the PHY side will consequently cause the traffic loss. We
discovered that the denoted soft-reset is missing in the
m88e1121_config_aneg() method for the case if the RGMII delays are
modified but the MDIx polarity isn't changed or the auto-negotiation is
left enabled, thus causing the traffic loss on our platform with Marvell
Alaska 88E1510 installed. Let's fix that by issuing the soft-reset if the
delays have been actually set in the m88e1121_config_aneg_rgmii_delays()
method.
bpf: test_run: Fix overflow in bpf_test_finish frags parsing
This place also uses signed min_t and passes this singed int to
copy_to_user (which accepts unsigned argument). I don't think
there is an issue, but let's be consistent.
When kattr->test.data_size_in > INT_MAX, signed min_t will assign
negative value to data_len. This negative value then gets passed
over to copy_from_user where it is converted to (big) unsigned.
Changes v8 => v9:
1. Fix an error with multi function program, in 4/9.
Changes v7 => v8:
1. Rebase and fix conflicts.
2. Lock text_mutex for text_poke_copy. (Daniel)
Changes v6 => v7:
1. Redesign the interface between generic and arch logic, based on feedback
from Alexei and Ilya.
2. Split 6/7 of v6 to 7/9 and 8/9 in v7, for cleaner logic.
3. Add bpf_arch_text_copy in 6/9.
Changes v5 => v6:
1. Make jit_hole_buffer 128 byte long. Only fill the first and last 128
bytes of header with INT3. (Alexei)
2. Use kvmalloc for temporary buffer. (Alexei)
3. Rename tmp_header/tmp_image => rw_header/rw_image. Remove tmp_image from
x64_jit_data. (Alexei)
4. Change fall back round_up_to in bpf_jit_binary_alloc_pack() from
BPF_PROG_MAX_PACK_PROG_SIZE to PAGE_SIZE.
Changes v4 => v5:
1. Do not use atomic64 for bpf_jit_current. (Alexei)
Changes v1 => v2:
1. Use text_poke instead of writing through linear mapping. (Peter)
2. Avoid making changes to non-x86_64 code.
Most BPF programs are small, but they consume a page each. For systems
with busy traffic and many BPF programs, this could also add significant
pressure to instruction TLB. High iTLB pressure usually causes slow down
for the whole system, which includes visible performance degradation for
production workloads.
This set tries to solve this problem with customized allocator that pack
multiple programs into a huge page.
Patches 1-6 prepare the work. Patch 7 contains key logic of bpf_prog_pack
allocator. Patch 8 contains bpf_jit_binary_pack_alloc logic on top of
bpf_prog_pack allocator. Patch 9 uses this allocator in x86_64 jit.
====================
Song Liu [Fri, 4 Feb 2022 18:57:42 +0000 (10:57 -0800)]
bpf, x86_64: Use bpf_jit_binary_pack_alloc
Use bpf_jit_binary_pack_alloc in x86_64 jit. The jit engine first writes
the program to the rw buffer. When the jit is done, the program is copied
to the final location with bpf_jit_binary_pack_finalize.
Note that we need to do bpf_tail_call_direct_fixup after finalize.
Therefore, the text_live = false logic in __bpf_arch_text_poke is no
longer needed.
This is the jit binary allocator built on top of bpf_prog_pack.
bpf_prog_pack allocates RO memory, which cannot be used directly by the
JIT engine. Therefore, a temporary rw buffer is allocated for the JIT
engine. Once JIT is done, bpf_jit_binary_pack_finalize is used to copy
the program to the RO memory.
bpf_jit_binary_pack_alloc reserves 16 bytes of extra space for illegal
instructions, which is small than the 128 bytes space reserved by
bpf_jit_binary_alloc. This change is necessary for bpf_jit_binary_hdr
to find the correct header. Also, flag use_bpf_prog_pack is added to
differentiate a program allocated by bpf_jit_binary_pack_alloc.
Song Liu [Fri, 4 Feb 2022 18:57:40 +0000 (10:57 -0800)]
bpf: Introduce bpf_prog_pack allocator
Most BPF programs are small, but they consume a page each. For systems
with busy traffic and many BPF programs, this could add significant
pressure to instruction TLB. High iTLB pressure usually causes slow down
for the whole system, which includes visible performance degradation for
production workloads.
Introduce bpf_prog_pack allocator to pack multiple BPF programs in a huge
page. The memory is then allocated in 64 byte chunks.
Memory allocated by bpf_prog_pack allocator is RO protected after initial
allocation. To write to it, the user (jit engine) need to use text poke
API.
Song Liu [Fri, 4 Feb 2022 18:57:34 +0000 (10:57 -0800)]
x86/Kconfig: Select HAVE_ARCH_HUGE_VMALLOC with HAVE_ARCH_HUGE_VMAP
This enables module_alloc() to allocate huge page for 2MB+ requests.
To check the difference of this change, we need enable config
CONFIG_PTDUMP_DEBUGFS, and call module_alloc(2MB). Before the change,
/sys/kernel/debug/page_tables/kernel shows pte for this map. With the
change, /sys/kernel/debug/page_tables/ show pmd for thie map.
Linus Torvalds [Mon, 7 Feb 2022 23:25:50 +0000 (15:25 -0800)]
Merge tag '5.17-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull ksmbd server fixes from Steve French:
- NTLMSSP authentication improvement
- RDMA (smbdirect) fix allowing broader set of NICs to be supported
- improved buffer validation
- additional small fixes, including a posix extensions fix for stable
* tag '5.17-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: add support for key exchange
ksmbd: reduce smb direct max read/write size
ksmbd: don't align last entry offset in smb2 query directory
ksmbd: fix same UniqueId for dot and dotdot entries
ksmbd: smbd: validate buffer descriptor structures
ksmbd: fix SMB 3.11 posix extension mount failure
Corinna Vinschen [Wed, 19 Jan 2022 14:52:59 +0000 (15:52 +0100)]
igb: refactor XDP registration
On changing the RX ring parameters igb uses a hack to avoid a warning
when calling xdp_rxq_info_reg via igb_setup_rx_resources. It just
clears the struct xdp_rxq_info content.
Instead, change this to unregister if we're already registered. Align
code to the igc code.
igc_ethtool_set_ringparam() copies the igc_ring structure but neglects to
reset the xdp_rxq_info member before calling igc_setup_rx_resources().
This in turn calls xdp_rxq_info_reg() with an already registered xdp_rxq_info.
Make sure to unregister the xdp_rxq_info structure first in
igc_setup_rx_resources.
This series fixes a bad calculation of strict mode in two places. It
also updates libbpf to make it easier for the users to disable a
specific LIBBPF_STRICT_* flag.
v1 -> v2:
- remove check in libbpf_set_strict_mode()
- split in different commits
"(__LIBBPF_STRICT_LAST - 1) & ~LIBBPF_STRICT_MAP_DEFINITIONS" is wrong
as it is equal to 0 (LIBBPF_STRICT_NONE). Let's use
"LIBBPF_STRICT_ALL & ~LIBBPF_STRICT_MAP_DEFINITIONS" now that the
previous commit makes it possible in libbpf.
"(__LIBBPF_STRICT_LAST - 1) & ~LIBBPF_STRICT_MAP_DEFINITIONS" is wrong
as it is equal to 0 (LIBBPF_STRICT_NONE). Let's use
"LIBBPF_STRICT_ALL & ~LIBBPF_STRICT_MAP_DEFINITIONS" now that the
previous commit makes it possible in libbpf.
libbpf: Remove mode check in libbpf_set_strict_mode()
libbpf_set_strict_mode() checks that the passed mode doesn't contain
extra bits for LIBBPF_STRICT_* flags that don't exist yet.
It makes it difficult for applications to disable some strict flags as
something like "LIBBPF_STRICT_ALL & ~LIBBPF_STRICT_MAP_DEFINITIONS"
is rejected by this check and they have to use a rather complicated
formula to calculate it.[0]
One possibility is to change LIBBPF_STRICT_ALL to only contain the bits
of all existing LIBBPF_STRICT_* flags instead of 0xffffffff. However
it's not possible because the idea is that applications compiled against
older libbpf_legacy.h would still be opting into latest
LIBBPF_STRICT_ALL features.[1]
The other possibility is to remove that check so something like
"LIBBPF_STRICT_ALL & ~LIBBPF_STRICT_MAP_DEFINITIONS" is allowed. It's
what this commit does.
* tag 'mmc-v5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
moxart: fix potential use-after-free on remove path
mmc: core: Wait for command setting 'Power Off Notification' bit to complete
mmc: sh_mmcif: Check for null res pointer
mmc: sdhci-of-esdhc: Check for error num after setting mask
Linus Torvalds [Mon, 7 Feb 2022 17:55:14 +0000 (09:55 -0800)]
Merge tag 'integrity-v5.17-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity fixes from Mimi Zohar:
"Fixes for recently found bugs.
One was found/noticed while reviewing IMA support for fsverity digests
and signatures. Two of them were found/noticed while working on IMA
namespacing. Plus two other bugs.
All of them are for previous kernel releases"
* tag 'integrity-v5.17-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Do not print policy rule with inactive LSM labels
ima: Allow template selection with ima_template[_fmt]= after ima_hash=
ima: Remove ima_policy file before directory
integrity: check the return value of audit_log_start()
ima: fix reference leak in asymmetric_verify()
Naveen N. Rao [Fri, 4 Feb 2022 11:35:20 +0000 (17:05 +0530)]
selftests/bpf: Fix tests to use arch-dependent syscall entry points
Some of the tests are using x86_64 ABI-specific syscall entry points
(such as __x64_sys_nanosleep and __x64_sys_getpgid). Update them to use
architecture-dependent syscall entry names.
Also update fexit_sleep test to not use BPF_PROG() so that it is clear
that the syscall parameters aren't being accessed in the bpf prog.
Note that none of the bpf progs in these tests are actually accessing
any of the syscall parameters. The only exception is perfbuf_bench, which
passes on the bpf prog context into bpf_perf_event_output() as a pointer
to pt_regs, but that looks to be mostly ignored.
Naveen N. Rao [Fri, 4 Feb 2022 11:35:19 +0000 (17:05 +0530)]
selftests/bpf: Use "__se_" prefix on architectures without syscall wrapper
On architectures that don't use a syscall wrapper, sys_* function names
are set as an alias of __se_sys_* functions. Due to this, there is no
BTF associated with sys_* function names. This results in some of the
test progs failing to load. Set the SYS_PREFIX to "__se_" to fix this
issue.
Damien Le Moal [Mon, 7 Feb 2022 02:27:53 +0000 (11:27 +0900)]
ata: libata-core: Fix ata_dev_config_cpr()
The concurrent positioning ranges log page 47h is a general purpose log
page and not a subpage of the indentify device log. Using
ata_identify_page_supported() to test for concurrent positioning ranges
support is thus wrong. ata_log_supported() must be used.
Furthermore, unlike other advanced ATA features (e.g. NCQ priority),
accesses to the concurrent positioning ranges log page are not gated by
a feature bit from the device IDENTIFY data. Since many older drives
react badly to the READ LOG EXT and/or READ LOG DMA EXT commands isued
to read device log pages, avoid problems with older drives by limiting
the concurrent positioning ranges support detection to drives
implementing at least the ACS-4 ATA standard (major version 11). This
additional condition effectively turns ata_dev_config_cpr() into a nop
for older drives, avoiding problems in the field.
Dan Carpenter [Mon, 7 Feb 2022 08:24:39 +0000 (11:24 +0300)]
net: dsa: mv88e6xxx: Unlock on error in mv88e6xxx_port_bridge_join()
Call mv88e6xxx_reg_unlock(chip) before returning on this error path.
Fixes: 7af4a361a62f ("net: dsa: mv88e6xxx: Improve isolation of standalone ports") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Dan Carpenter [Mon, 7 Feb 2022 08:22:53 +0000 (11:22 +0300)]
net: dsa: mv88e6xxx: Fix off by in one in mv88e6185_phylink_get_caps()
The <= ARRAY_SIZE() needs to be < ARRAY_SIZE() to prevent an out of
bounds error.
Fixes: d4ebf12bcec4 ("net: dsa: mv88e6xxx: populate supported_interfaces and mac_capabilities") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Russell King (Oracle) <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Yufeng Mo [Mon, 7 Feb 2022 01:44:23 +0000 (09:44 +0800)]
net: hns3: add support for TX push mode
For the device that supports the TX push capability, the BD can
be directly copied to the device memory. However, due to hardware
restrictions, the push mode can be used only when there are no
more than two BDs, otherwise, the doorbell mode based on device
memory is used.
Pavel Skripkin [Sun, 6 Feb 2022 18:05:16 +0000 (21:05 +0300)]
net: asix: add proper error handling of usb read errors
Syzbot once again hit uninit value in asix driver. The problem still the
same -- asix_read_cmd() reads less bytes, than was requested by caller.
Since all read requests are performed via asix_read_cmd() let's catch
usb related error there and add __must_check notation to be sure all
callers actually check return value.
So, this patch adds sanity check inside asix_read_cmd(), that simply
checks if bytes read are not less, than was requested and adds missing
error handling of asix_read_cmd() all across the driver code.
Heiner Kallweit [Sun, 6 Feb 2022 16:07:13 +0000 (17:07 +0100)]
r8169: factor out redundant RTL8168d PHY config functionality to rtl8168d_1_common()
rtl8168d_2_hw_phy_config() shares quite some functionality with
rtl8168d_1_hw_phy_config(), so let's factor out the common part to a
new function rtl8168d_1_common(). In addition improve the code a little.
This was fine because ip6mr_sk_done() would not reach the point decreasing
net->ipv6.devconf_all->mc_forwarding until my patch in ip6mr_sk_done().
To fix this without changing struct pernet_operations ordering,
we can clear net->ipv6.devconf_dflt and net->ipv6.devconf_all
when they are freed from addrconf_exit_net()
BUG: KASAN: use-after-free in instrument_atomic_read include/linux/instrumented.h:71 [inline]
BUG: KASAN: use-after-free in atomic_read include/linux/atomic/atomic-instrumented.h:27 [inline]
BUG: KASAN: use-after-free in ip6mr_sk_done+0x11b/0x410 net/ipv6/ip6mr.c:1578
Read of size 4 at addr ffff88801ff08688 by task kworker/u4:4/963
Fixes: f2f2325ec799 ("ip6mr: ip6mr_sk_done() can exit early in common cases") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Eric Dumazet [Sun, 6 Feb 2022 14:33:48 +0000 (06:33 -0800)]
net/smc: use GFP_ATOMIC allocation in smc_pnet_add_eth()
My last patch moved the netdev_tracker_alloc() call to a section
protected by a write_lock().
I should have replaced GFP_KERNEL with GFP_ATOMIC to avoid the infamous:
BUG: sleeping function called from invalid context at include/linux/sched/mm.h:256
Fixes: 28f922213886 ("net/smc: fix ref_tracker issue in smc_pnet_add()") Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
David S. Miller [Mon, 7 Feb 2022 11:59:57 +0000 (11:59 +0000)]
Merge branch 'mlxsw-dip-sip-mangling'
Ido Schimmel says:
====================
mlxsw: Add SIP and DIP mangling support
Danielle says:
On Spectrum-2 onwards, it is possible to overwrite SIP and DIP address
of an IPv4 or IPv6 packet in the ACL engine. That corresponds to pedit
munges of, respectively, ip src and ip dst fields, and likewise for ip6.
Offload these munges on the systems where they are supported.
Patchset overview:
Patch #1: introduces SIP_DIP_ACTION and its fields.
Patch #2-#3: adds the new pedit fields, and dispatches on them on
Spectrum-2 and above.
Patch #4 adds a selftest.
====================
Danielle Ratson [Sun, 6 Feb 2022 15:36:13 +0000 (17:36 +0200)]
selftests: forwarding: Add a test for pedit munge SIP and DIP
Add a test that checks that pedit adjusts source and destination
addresses of IPv4 and IPv6 packets.
Output example:
$ ./pedit_ip.sh
TEST: ping [ OK ]
TEST: ping6 [ OK ]
TEST: dev swp2 ingress pedit ip src set 198.51.100.1 [ OK ]
TEST: dev swp3 egress pedit ip src set 198.51.100.1 [ OK ]
TEST: dev swp2 ingress pedit ip dst set 198.51.100.1 [ OK ]
TEST: dev swp3 egress pedit ip dst set 198.51.100.1 [ OK ]
TEST: dev swp2 ingress pedit ip6 src set 2001:db8:2::1 [ OK ]
TEST: dev swp3 egress pedit ip6 src set 2001:db8:2::1 [ OK ]
TEST: dev swp2 ingress pedit ip6 dst set 2001:db8:2::1 [ OK ]
TEST: dev swp3 egress pedit ip6 dst set 2001:db8:2::1 [ OK ]
Danielle Ratson [Sun, 6 Feb 2022 15:36:12 +0000 (17:36 +0200)]
mlxsw: Support FLOW_ACTION_MANGLE for SIP and DIP IPv6 addresses
Spectrum-2 supports an ACL action SIP_DIP, which allows IPv4 and IPv6
source and destination addresses change. Offload suitable mangles to
the IPv6 address change action.
Danielle Ratson [Sun, 6 Feb 2022 15:36:11 +0000 (17:36 +0200)]
mlxsw: Support FLOW_ACTION_MANGLE for SIP and DIP IPv4 addresses
Spectrum-2 supports an ACL action SIP_DIP, which allows IPv4 and IPv6
source and destination addresses change. Offload suitable mangles to
the IPv4 address change action.
David S. Miller [Mon, 7 Feb 2022 11:18:49 +0000 (11:18 +0000)]
Merge branch 'ipv6-kfree_skb_reason'
Menglong Dong says:
====================
net: use kfree_skb_reason() for ip/udp packet receive
In this series patches, kfree_skb() is replaced with kfree_skb_reason()
during ipv4 and udp4 packet receiving path, and following drop reasons
are introduced:
TCP is more complex, so I left it in the next series.
I just figure out how __print_symbolic() works. It doesn't base on the
array index, but searching for symbols by loop. So I'm a little afraid
it's performance.
Changes since v3:
- fix some small problems in the third patch (net: ipv4: use
kfree_skb_reason() in ip_rcv_core()), as David Ahern said
Changes since v2:
- use SKB_DROP_REASON_PKT_TOO_SMALL for a path in ip_rcv_core()
Changes since v1:
- add document for all drop reasons, as David advised
- remove unreleated cleanup
- remove EARLY_DEMUX and IP_ROUTE_INPUT drop reason
- replace {UDP, TCP}_FILTER with SOCKET_FILTER
====================
Linus Torvalds [Sun, 6 Feb 2022 18:34:45 +0000 (10:34 -0800)]
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Various bug fixes for ext4 fast commit and inline data handling.
Also fix regression introduced as part of moving to the new mount API"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
fs/ext4: fix comments mentioning i_mutex
ext4: fix incorrect type issue during replay_del_range
jbd2: fix kernel-doc descriptions for jbd2_journal_shrink_{scan,count}()
ext4: fix potential NULL pointer dereference in ext4_fill_super()
jbd2: refactor wait logic for transaction updates into a common function
jbd2: cleanup unused functions declarations from jbd2.h
ext4: fix error handling in ext4_fc_record_modified_inode()
ext4: remove redundant max inline_size check in ext4_da_write_inline_data_begin()
ext4: fix error handling in ext4_restore_inline_data()
ext4: fast commit may miss file actions
ext4: fast commit may not fallback for ineligible commit
ext4: modify the logic of ext4_mb_new_blocks_simple
ext4: prevent used blocks from being allocated during fast commit replay
Linus Torvalds [Sun, 6 Feb 2022 18:18:23 +0000 (10:18 -0800)]
Merge tag 'perf-tools-fixes-for-v5.17-2022-02-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix display of grouped aliased events in 'perf stat'.
- Add missing branch_sample_type to perf_event_attr__fprintf().
- Apply correct label to user/kernel symbols in branch mode.
- Fix 'perf ftrace' system_wide tracing, it has to be set before
creating the maps.
- Return error if procfs isn't mounted for PID namespaces when
synthesizing records for pre-existing processes.
- Set error stream of objdump process for 'perf annotate' TUI, to avoid
garbling the screen.
- Add missing arm64 support to perf_mmap__read_self(), the kernel part
got into 5.17.
- Check for NULL pointer before dereference writing debug info about a
sample.
- Update UAPI copies for asound, perf_event, prctl and kvm headers.
- Fix a typo in bpf_counter_cgroup.c.
* tag 'perf-tools-fixes-for-v5.17-2022-02-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf ftrace: system_wide collection is not effective by default
libperf: Add arm64 support to perf_mmap__read_self()
tools include UAPI: Sync sound/asound.h copy with the kernel sources
perf stat: Fix display of grouped aliased events
perf tools: Apply correct label to user/kernel symbols in branch mode
perf bpf: Fix a typo in bpf_counter_cgroup.c
perf synthetic-events: Return error if procfs isn't mounted for PID namespaces
perf session: Check for NULL pointer before dereference
perf annotate: Set error stream of objdump process for TUI
perf tools: Add missing branch_sample_type to perf_event_attr__fprintf()
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers UAPI: Sync linux/prctl.h with the kernel sources
perf beauty: Make the prctl arg regexp more strict to cope with PR_SET_VMA
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync linux/perf_event.h with the kernel sources
tools include UAPI: Sync sound/asound.h copy with the kernel sources
Linus Torvalds [Sun, 6 Feb 2022 18:11:14 +0000 (10:11 -0800)]
Merge tag 'perf_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Intel/PT: filters could crash the kernel
- Intel: default disable the PMU for SMM, some new-ish EFI firmware has
started using CPL3 and the PMU CPL filters don't discriminate against
SMM, meaning that CPL3 (userspace only) events now also count EFI/SMM
cycles.
- Fixup for perf_event_attr::sig_data
* tag 'perf_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/pt: Fix crash with stop filters in single-range mode
perf: uapi: Document perf_event_attr::sig_data truncation on 32 bit architectures
selftests/perf_events: Test modification of perf_event_attr::sig_data
perf: Copy perf_event_attr::sig_data on modification
x86/perf: Default set FREEZE_ON_SMI for all
Linus Torvalds [Sun, 6 Feb 2022 17:57:39 +0000 (09:57 -0800)]
Merge tag 'edac_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
"Fix altera and xgene EDAC drivers to propagate the correct error code
from platform_get_irq() so that deferred probing still works"
* tag 'edac_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/xgene: Fix deferred probing
EDAC/altera: Fix deferred probing
Rob Herring [Tue, 1 Feb 2022 21:40:56 +0000 (15:40 -0600)]
libperf: Add arm64 support to perf_mmap__read_self()
Add the arm64 variants for read_perf_counter() and read_timestamp().
Unfortunately the counter number is encoded into the instruction, so the
code is a bit verbose to enumerate all possible counters.
Which entails no changes in the tooling side as it doesn't introduce new
SNDRV_PCM_IOCTL_ ioctls.
To silence this perf tools build warning:
Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h'
diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h
Ian Rogers [Sat, 5 Feb 2022 01:09:41 +0000 (17:09 -0800)]
perf stat: Fix display of grouped aliased events
An event may have a number of uncore aliases that when added to the
evlist are consecutive.
If there are multiple uncore events in a group then
parse_events__set_leader_for_uncore_aliase will reorder the evlist so
that events on the same PMU are adjacent.
The collect_all_aliases function assumes that aliases are in blocks so
that only the first counter is printed and all others are marked merged.
The reordering for groups breaks the assumption and so all counts are
printed.
This change removes the assumption from collect_all_aliases
that the events are in blocks and instead processes the entire evlist.
Before:
```
$ perf stat -e '{UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE,UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE},duration_time' -a -A -- sleep 1
Leo Yan [Fri, 24 Dec 2021 12:40:13 +0000 (20:40 +0800)]
perf synthetic-events: Return error if procfs isn't mounted for PID namespaces
For perf recording, it retrieves process info by iterating nodes in proc
fs. If we run perf in a non-root PID namespace with command:
# unshare --fork --pid perf record -e cycles -a -- test_program
... in this case, unshare command creates a child PID namespace and
launches perf tool in it, but the issue is the proc fs is not mounted
for the non-root PID namespace, this leads to the perf tool gathering
process info from its parent PID namespace.
We can use below command to observe the process nodes under proc fs:
So it shows many existed tasks, since unshared command has not mounted
the proc fs for the new created PID namespace, it still accesses the
proc fs of the root PID namespace. This leads to two prominent issues:
- Firstly, PID values are mismatched between thread info and samples.
The gathered thread info are coming from the proc fs of the root PID
namespace, but samples record its PID from the child PID namespace.
- The second issue is profiled program 'test_program' returns its forked
PID number from the child PID namespace, perf tool wrongly uses this
PID number to retrieve the process info via the proc fs of the root
PID namespace.
To avoid issues, we need to mount proc fs for the child PID namespace
with the option '--mount-proc' when use unshare command:
# unshare --fork --pid --mount-proc perf record -e cycles -a -- test_program
Conversely, when the proc fs of the root PID namespace is used by child
namespace, perf tool can detect the multiple PID levels and
nsinfo__is_in_root_namespace() returns false, this patch reports error
for this case:
# unshare --fork --pid perf record -e cycles -a -- test_program
Couldn't synthesize bpf events.
Perf runs in non-root PID namespace but it tries to gather process info from its parent PID namespace.
Please mount the proc file system properly, e.g. add the option '--mount-proc' for unshare command.
tools headers UAPI: Sync linux/kvm.h with the kernel sources
To pick the changes in:
f6c6804c43fa18d3 ("kvm: Move KVM_GET_XSAVE2 IOCTL definition at the end of kvm.h")
That just rebuilds perf, as these patches don't add any new KVM ioctl to
be harvested for the the 'perf trace' ioctl syscall argument
beautifiers.
This is also by now used by tools/testing/selftests/kvm/, a simple test
build succeeded.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Fixes: b60645248af3 ("net/smc: add net device tracker to struct smc_pnetentry") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
net: phy: marvell: Fix MDI-x polarity setting in 88e1118-compatible PHYs
When setting up autonegotiation for 88E1118R and compatible PHYs,
a software reset of PHY is issued before setting up polarity.
This is incorrect as changes of MDI Crossover Mode bits are
disruptive to the normal operation and must be followed by a
software reset to take effect. Let's patch m88e1118_config_aneg()
to fix the issue mentioned before by invoking software reset
of the PHY just after setting up MDI-x polarity.
Eric Dumazet [Sat, 5 Feb 2022 17:27:11 +0000 (09:27 -0800)]
ref_tracker: remove filter_irq_stacks() call
After commit e94006608949 ("lib/stackdepot: always do filter_irq_stacks()
in stack_depot_save()") it became unnecessary to filter the stack
before calling stack_depot_save().
Eric Dumazet [Sat, 5 Feb 2022 17:01:25 +0000 (09:01 -0800)]
net: initialize init_net earlier
While testing a patch that will follow later
("net: add netns refcount tracker to struct nsproxy")
I found that devtmpfs_init() was called before init_net
was initialized.
This is a bug, because devtmpfs_setup() calls
ksys_unshare(CLONE_NEWNS);
This has the effect of increasing init_net refcount,
which will be later overwritten to 1, as part of setup_net(&init_net)
We had too many prior patches [1] trying to work around the root cause.
Really, make sure init_net is in BSS section, and that net_ns_init()
is called earlier at boot time.
Note that another patch ("vfs: add netns refcount tracker
to struct fs_context") also will need net_ns_init() being called
before vfs_caches_init()
As a bonus, this patch saves around 4KB in .data section.
[1]
f8c46cb39079 ("netns: do not call pernet ops for not yet set up init_net namespace") b5082df8019a ("net: Initialise init_net.count to 1") 734b65417b24 ("net: Statically initialize init_net.dev_base_head")
v2: fixed a build error reported by kernel build bots (CONFIG_NET=n)
Juhee Kang [Sat, 5 Feb 2022 15:40:38 +0000 (15:40 +0000)]
net: hsr: use hlist_head instead of list_head for mac addresses
Currently, HSR manages mac addresses of known HSR nodes by using list_head.
It takes a lot of time when there are a lot of registered nodes due to
finding specific mac address nodes by using linear search. We can be
reducing the time by using hlist. Thus, this patch moves list_head to
hlist_head for mac addresses and this allows for further improvement of
network performance.
Linus Torvalds [Sat, 5 Feb 2022 17:55:59 +0000 (09:55 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- A couple of fixes when handling an exception while a SError has
been delivered
- Workaround for Cortex-A510's single-step erratum
RISC-V:
- Make CY, TM, and IR counters accessible in VU mode
- Fix SBI implementation version
x86:
- Report deprecation of x87 features in supported CPUID
- Preparation for fixing an interrupt delivery race on AMD hardware
- Sparse fix
All except POWER and s390:
- Rework guest entry code to correctly mark noinstr areas and fix
vtime' accounting (for x86, this was already mostly correct but not
entirely; for ARM, MIPS and RISC-V it wasn't)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Use ERR_PTR_USR() to return -EFAULT as a __user pointer
KVM: x86: Report deprecated x87 features in supported CPUID
KVM: arm64: Workaround Cortex-A510's single-step and PAC trap errata
KVM: arm64: Stop handle_exit() from handling HVC twice when an SError occurs
KVM: arm64: Avoid consuming a stale esr value when SError occur
RISC-V: KVM: Fix SBI implementation version
RISC-V: KVM: make CY, TM, and IR counters accessible in VU mode
kvm/riscv: rework guest entry logic
kvm/arm64: rework guest entry logic
kvm/x86: rework guest entry logic
kvm/mips: rework guest entry logic
kvm: add guest_state_{enter,exit}_irqoff()
KVM: x86: Move delivery of non-APICv interrupt into vendor code
kvm: Move KVM_GET_XSAVE2 IOCTL definition at the end of kvm.h
Linus Torvalds [Sat, 5 Feb 2022 17:21:55 +0000 (09:21 -0800)]
Merge tag 'xfs-5.17-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"I was auditing operations in XFS that clear file privileges, and
realized that XFS' fallocate implementation drops suid/sgid but
doesn't clear file capabilities the same way that file writes and
reflink do.
There are VFS helpers that do it correctly, so refactor XFS to use
them. I also noticed that we weren't flushing the log at the correct
point in the fallocate operation, so that's fixed too.
Summary:
- Fix fallocate so that it drops all file privileges when files are
modified instead of open-coding that incompletely.
- Fix fallocate to flush the log if the caller wanted synchronous
file updates"
* tag 'xfs-5.17-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: ensure log flush at the end of a synchronous fallocate call
xfs: move xfs_update_prealloc_flags() to xfs_pnfs.c
xfs: set prealloc flag in xfs_alloc_file_space()
xfs: fallocate() should call file_modified()
xfs: remove XFS_PREALLOC_SYNC
xfs: reject crazy array sizes being fed to XFS_IOC_GETBMAP*
Linus Torvalds [Sat, 5 Feb 2022 17:13:51 +0000 (09:13 -0800)]
Merge tag 'vfs-5.17-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull vfs fixes from Darrick Wong:
"I was auditing the sync_fs code paths recently and noticed that most
callers of ->sync_fs ignore its return value (and many implementations
never return nonzero even if the fs is broken!), which means that
internal fs errors and corruption are not passed up to userspace
callers of syncfs(2) or FIFREEZE. Hence fixing the common code and
XFS, and I'll start working on the ext4/btrfs folks if this is merged.
Summary:
- Fix a bug where callers of ->sync_fs (e.g. sync_filesystem and
syncfs(2)) ignore the return value.
- Fix a bug where callers of sync_filesystem (e.g. fs freeze) ignore
the return value.
- Fix a bug in XFS where xfs_fs_sync_fs never passed back error
returns"
* tag 'vfs-5.17-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: return errors in xfs_fs_sync_fs
quota: make dquot_quota_sync return errors from ->sync_fs
vfs: make sync_filesystem return errors from ->sync_fs
vfs: make freeze_super abort when sync_filesystem returns error
Linus Torvalds [Sat, 5 Feb 2022 17:04:43 +0000 (09:04 -0800)]
Merge tag 'iomap-5.17-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap fix from Darrick Wong:
"A single bugfix for iomap.
The fix should eliminate occasional complaints about stall warnings
when a lot of writeback IO completes all at once and we have to then
go clearing status on a large number of folios.
Summary:
- Limit the length of ioend chains in writeback so that we don't trip
the softlockup watchdog and to limit long tail latency on clearing
PageWriteback"
* tag 'iomap-5.17-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs, iomap: limit individual ioend chain lengths in writeback
projects / linux.git / log