Xin Long [Tue, 4 Apr 2017 05:39:55 +0000 (13:39 +0800)]
sctp: get sock from transport in sctp_transport_update_pmtu
This patch is almost to revert commit 02f3d4ce9e81 ("sctp: Adjust PMTU
updates to accomodate route invalidation."). As t->asoc can't be NULL
in sctp_transport_update_pmtu, it could get sk from asoc, and no need
to pass sk into that function.
It is also to remove some duplicated codes from that function.
Earlier patch c4adfc822bf5 ("bonding: make speed, duplex setting
consistent with link state") made an attempt to keep slave state
consistent with speed and duplex settings. Unfortunately link-state
transition is used to change the active link especially when used
in conjunction with mii-mon. The above mentioned patch broke that
logic. Also when speed and duplex settings for a link are updated
during a link-event, the link-status should not be changed to
invoke correct transition logic.
This patch fixes this issue by moving the link-state update outside
of the bond_update_speed_duplex() fn and to the places where this fn
is called and update link-state selectively.
Fixes: c4adfc822bf5 ("bonding: make speed, duplex setting consistent
with link state") Signed-off-by: Mahesh Bandewar <[email protected]> Reviewed-by: Andy Gospodarek <[email protected]> Signed-off-by: David S. Miller <[email protected]>
cb_running is reported in /proc/self/net/netlink and it is reported by
the ss tool, when it gets information from the proc files.
sock_diag is a new interface which is used instead of proc files, so it
looks reasonable that this interface has to report no less information
about sockets than proc files.
We use these flags to dump and restore netlink sockets.
Dan Carpenter [Mon, 3 Apr 2017 18:18:27 +0000 (21:18 +0300)]
liquidio: clear the correct memory
There is a cut and paste bug here so we accidentally clear the first
few bytes of "resp" a second time instead clearing "ctx".
Fixes: 50c0add534d2 ("liquidio: refactor interrupt moderation code") Signed-off-by: Dan Carpenter <[email protected]> Acked-by: Felix Manlunas <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Michael Chan [Tue, 4 Apr 2017 22:14:17 +0000 (18:14 -0400)]
bnxt_en: Cap the msix vector with the max completion rings.
The current code enables up to the maximum MSIX vectors in the PCIE
config space without considering the max completion rings available.
An MSIX vector is only useful when it has an associated completion
ring, so it is better to cap it.
Michael Chan [Tue, 4 Apr 2017 22:14:16 +0000 (18:14 -0400)]
bnxt_en: Use short TX BDs for the XDP TX ring.
No offload is performed on the XDP_TX ring so we can use the short TX
BDs. This has the effect of doubling the size of the XDP TX ring so
that it now matches the size of the rx ring by default.
Michael Chan [Tue, 4 Apr 2017 22:14:13 +0000 (18:14 -0400)]
bnxt_en: Add ethtool mac loopback self test.
The mac loopback self test operates in polling mode. To support that,
we need to add functions to open and close the NIC half way. The half
open mode allows the rings to operate without IRQ and NAPI. We
use the XDP transmit function to send the loopback packet.
Vic Yang [Fri, 24 Mar 2017 17:44:01 +0000 (18:44 +0100)]
mfd: cros-ec: Fix host command buffer size
For SPI, we can get up to 32 additional bytes for response preamble.
The current overhead (2 bytes) may cause problems when we try to receive
a big response. Update it to 32 bytes.
Without this fix we could see a kernel BUG when we receive a big response
from the Chrome EC when is connected via SPI.
Signed-off-by: Vic Yang <[email protected]> Tested-by: Enric Balletbo i Serra <enric.balletbo.collabora.com> Signed-off-by: Lee Jones <[email protected]>
Merge tag 'gpio-v4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull late GPIO fixes from Linus Walleij:
"Some late coming ACPI fixes for GPIO.
We're dealing with ACPI issues here. The first is related to wake IRQs
on Bay Trail/Cherry Trail CPUs which are common in laptops. The second
is about proper probe deferral when reading _CRS properties.
For my untrained eye it seems there was some quarrel between the BIOS
and the kernel about who is supposed to deal with wakeups from GPIO
lines"
* tag 'gpio-v4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
ACPI / gpio: do not fall back to parsing _CRS when we get a deferral
gpio: acpi: Call enable_irq_wake for _IAE GpioInts with Wake set
Sekhar Nori [Mon, 3 Apr 2017 12:04:28 +0000 (17:34 +0530)]
net: ethernet: ti: cpsw: fix race condition during open()
TI's cpsw driver handles both OF and non-OF case for phy
connect. Unfortunately of_phy_connect() returns NULL on
error while phy_connect() returns ERR_PTR().
To handle this, cpsw_slave_open() overrides the return value
from phy_connect() to make it NULL or error.
This leaves a small window, where cpsw_adjust_link() may be
invoked for a slave while slave->phy pointer is temporarily
set to -ENODEV (or some other error) before it is finally set
to NULL.
_cpsw_adjust_link() only handles the NULL case, and an oops
results when ERR_PTR() is seen by it.
Note that cpsw_adjust_link() checks PHY status for each
slave whenever it is invoked. It can so happen that even
though phy_connect() for a given slave returns error,
_cpsw_adjust_link() is still called for that slave because
the link status of another slave changed.
Fix this by using a temporary pointer to store return value
of {of_}phy_connect() and do a one-time write to slave->phy.
Merge tag 'drm-fixes-for-v4.11-rc6' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"This is just mostly stuff that missed rc5, from vmwgfx and msm
drivers"
* tag 'drm-fixes-for-v4.11-rc6' of git://people.freedesktop.org/~airlied/linux:
drm/msm: Make sure to detach the MMU during GPU cleanup
drm/msm/hdmi: redefinitions of macros not required
drm/msm/mdp5: Update SSPP_MAX value
drm/msm/dsi: Fix bug in dsi_mgr_phy_enable
drm/msm: Don't allow zero sized buffer objects
drm/msm: Fix wrong pointer check in a5xx_destroy
drm/msm: adreno: fix build error without debugfs
drm/vmwgfx: fix integer overflow in vmw_surface_define_ioctl()
drm/vmwgfx: Remove getparam error message
drm/ttm: Avoid calling drm_ht_remove from atomic context
drm/ttm, drm/vmwgfx: Relax permission checking when opening surfaces
drm/vmwgfx: avoid calling vzalloc with a 0 size in vmw_get_cap_3d_ioctl()
drm/vmwgfx: NULL pointer dereference in vmw_surface_define_ioctl()
drm/vmwgfx: Type-check lookups of fence objects
Fixes: f1f39f911027 ("l2tp: auto load type modules") Signed-off-by: Guillaume Nault <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Take a reference on the sessions returned by l2tp_session_find_nth()
(and rename it l2tp_session_get_nth() to reflect this change), so that
caller is assured that the session isn't going to disappear while
processing it.
For procfs and debugfs handlers, the session is held in the .start()
callback and dropped in .show(). Given that pppol2tp_seq_session_show()
dereferences the associated PPPoL2TP socket and that
l2tp_dfs_seq_session_show() might call pppol2tp_show(), we also need to
call the session's .ref() callback to prevent the socket from going
away from under us.
Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Fixes: 0ad6614048cf ("l2tp: Add debugfs files for dumping l2tp debug info") Fixes: 309795f4bec2 ("l2tp: Add netlink control API for L2TP") Signed-off-by: Guillaume Nault <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Akshay Bhat [Fri, 17 Mar 2017 21:10:40 +0000 (17:10 -0400)]
can: hi311x: Add Holt HI-311x CAN driver
This patch adds support for the Holt HI-311x CAN controller. The HI311x
CAN controller is capable of transmitting and receiving standard data
frames, extended data frames and remote frames. The HI311x interfaces
with the host over SPI.
Mario Kicherer [Tue, 21 Feb 2017 11:19:47 +0000 (12:19 +0100)]
can: initial support for network namespaces
This patch adds initial support for network namespaces. The changes only
enable support in the CAN raw, proc and af_can code. GW and BCM still
have their checks that ensure that they are used only from the main
namespace.
The patch boils down to moving the global structures, i.e. the global
filter list and their /proc stats, into a per-namespace structure and passing
around the corresponding "struct net" in a lot of different places.
Changes since v1:
- rebased on current HEAD (2bfe01e)
- fixed overlong line
David S. Miller [Tue, 4 Apr 2017 02:16:38 +0000 (19:16 -0700)]
Merge branch 'qed-QM-ILT-changes'
Yuval Mintz says:
====================
qed: QM & ILT changes
This series introduces several changes and improvements to existing
queue manager and ILT configurations done during initialization.
Notice some of the patches are actually future fixes, I.e., bugs that
can't be triggered with exisiting driver but are needed for some future
functionality.
Patch #1 refactors the configuration of the hardware's queue manager,
which is quite messy today. This contains most of the bulk [code-wise]
in the series.
Patch #2, #3 fix Timers related ILT configurations that are yet to
affect qed in existing scenarios.
Patch #4 reduces needless ILT lines wasted for RoCE configurations.
Patch #5 allows RoCE partitions to manage with less memory regions
[important, e.g., for Multi-function parititions with RoCE support].
====================
It's possible some configurations would prevent driver from utilizing
all the Memory Regions due to a lack of ILT lines.
In such a case, calculate how many memory regions would have to be
dropped due to limit, and manage without those.
As of today there's no protocol supported that requires
support from the TM hardware block and enables SRIOV,
but we should still correct the calculation to reflect
the lines required for such future VFs instead of changing
the PF's own lines.
Michal Kalderon [Mon, 3 Apr 2017 09:21:10 +0000 (12:21 +0300)]
qed: Fix TM block ILT allocation
When configuring the HW timers block we should set the number of CIDs
up until the last CID that require timers, instead of only those CIDs
whose protocol needs timers support.
Today, the protocols that require HW timers' support have their CIDs
before any other protocol, but that would change in future [when we
add iWARP support].
Refactor and clean up the queue manager initialization logic.
Also, this adds support for RoC low latency queues, which later
would be used for improving RoCE latency in high throughput scenarios.
Add support for the net stats64 counters to the usbnet core. With that
in place put the hooks into every usbnet driver to use it.
This is a strait forward addition of 64bit counters for RX and TX packet
and byte counts. It is done in the same style as for the other net drivers
that support stats64. Note that the other stats fields remain as 32bit
sized values (error counts, etc).
The motivation to add this is that it is not particularly difficult to
get the RX and TX byte counts to wrap on 32bit platforms.
Make ->hash_count, ->low_watermark and ->high_watermark unsigned int
and propagate unsignedness to other variables.
This change doesn't change code generation because these fields aren't
used in 64-bit contexts but make it anyway: these fields can't be
negative numbers.
Andrew Lunn [Sun, 2 Apr 2017 18:20:47 +0000 (20:20 +0200)]
net/faraday: Add missing include of of.h
Breaking the include loop netdevice.h, dsa.h, devlink.h broke this
driver, it depends on includes brought in by these headers. Adding
linux/of.h fixes it.
Fixes: ed0e39e97d34 ("net: break include loop netdevice.h, dsa.h, devlink.h") Signed-off-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Vincent Bernat [Sun, 2 Apr 2017 09:00:06 +0000 (11:00 +0200)]
vxlan: fix ND proxy when skb doesn't have transport header offset
When an incoming frame is tagged or when GRO is disabled, the skb
handled to vxlan_xmit() doesn't contain a valid transport header
offset. This makes ND proxying fail.
We combine two changes: replace use of skb_transport_offset() and ensure
the necessary amount of skb is linear just before using it:
- In vxlan_xmit(), when determining if we have an ICMPv6 neighbor
discovery packet, just check if it is an ICMPv6 packet and rely on
neigh_reduce() to do more checks if this is the case. The use of
pskb_may_pull() is replaced by skb_header_pointer() for just the IPv6
header.
- In neigh_reduce(), add pskb_may_pull() for IPv6 header and neighbor
discovery message since this was removed from vxlan_xmit(). Replace
skb_transport_header() with ipv6_hdr() + 1.
- In vxlan_na_create(), replace first skb_transport_offset() with
ipv6_hdr() + 1 and second with skb_network_offset() + sizeof(struct
ipv6hdr). Additionally, ensure we pskb_may_pull() the whole skb as we
need it to iterate over the options.
Markus Trippelsdorf reported that after commit dcb17d22e1c2 ("tcp: warn
on bogus MSS and try to amend it") the kernel started logging the
warning for a NIC driver that doesn't even support GRO.
It was diagnosed that it was possibly caused on connections that were
using TCP Timestamps but some packets lacked the Timestamps option. As
we reduce rcv_mss when timestamps are used, the lack of them would cause
the packets to be bigger than expected, although this is a valid case.
As this warning is more as a hint, getting a clean-cut on the
threshold is probably not worth the execution time spent on it. This
patch thus alleviates the false-positives with 2 quick checks: by
accounting for the entire TCP option space and also checking against the
interface MTU if it's available.
These changes, specially the MTU one, might mask some real positives,
though if they are really happening, it's possible that sooner or later
it will be triggered anyway.
Merge tag 'xtensa-20170403' of git://github.com/jcmvbkbc/linux-xtensa
Pull Xtensa fixes from Max Filippov:
- make __pa work with uncached KSEG addresses, it fixes DMA memory
mmapping and DMA debug
- fix torn stack dump output
- wire up statx syscall
* tag 'xtensa-20170403' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: wire up statx system call
xtensa: fix stack dump output
xtensa: make __pa work with uncached KSEG addresses
Dave Airlie [Tue, 4 Apr 2017 00:13:40 +0000 (10:13 +1000)]
Merge branch 'msm-fixes-4.11-rc6' of git://people.freedesktop.org/~robclark/linux into drm-fixes
misc msm fixes.
* 'msm-fixes-4.11-rc6' of git://people.freedesktop.org/~robclark/linux:
drm/msm: Make sure to detach the MMU during GPU cleanup
drm/msm/hdmi: redefinitions of macros not required
drm/msm/mdp5: Update SSPP_MAX value
drm/msm/dsi: Fix bug in dsi_mgr_phy_enable
drm/msm: Don't allow zero sized buffer objects
drm/msm: Fix wrong pointer check in a5xx_destroy
drm/msm: adreno: fix build error without debugfs
Xin Long [Sat, 1 Apr 2017 09:15:59 +0000 (17:15 +0800)]
sctp: check for dst and pathmtu update in sctp_packet_config
This patch is to move sctp_transport_dst_check into sctp_packet_config
from sctp_packet_transmit and add pathmtu check in sctp_packet_config.
With this fix, sctp can update dst or pathmtu before appending chunks,
which can void dropping packets in sctp_packet_transmit when dst is
obsolete or dst's mtu is changed.
This patch is also to improve some other codes in sctp_packet_config.
It updates packet max_size with gso_max_size, checks for dst and
pathmtu, and appends ecne chunk only when packet is empty and asoc
is not NULL.
It makes sctp flush work better, as we only need to set up them once
for one flush schedule. It's also safe, since asoc is NULL only when
the packet is created by sctp_ootb_pkt_new in which it just gets the
new dst, no need to do more things for it other than set packet with
transport's pathmtu.
There is a bug on Hip06 that tx ring interrupts packets count will be
clear when drivers send data to tx ring, so that the tx packets count
will never upgrade to packets line, and cause the interrupts engendered
was delayed.
Sometimes, it will cause sending performance lower than expected.
To fix this bug, we set tx ring interrupts packets line to 1 forever,
to avoid count clear. And set the gap time to 20us, to solve the problem
that too many interrupts engendered when packets line is 1.
This patch could advance the send performance on ARM from 6.6G to 9.37G
when an iperf send thread on ARM and an iperf send thread on X86 for XGE.
Kejian Yan [Sat, 1 Apr 2017 11:03:46 +0000 (12:03 +0100)]
net: hns: Adjust the SBM module buffer threshold
HNS needs SMB Buffers to store at least two packets after sending
pause frame because of the link delay. The MTU of HNS is 9728. As
the processor user manual described, the SBM buffer threshold should
be modified.
Kejian Yan [Sat, 1 Apr 2017 11:03:45 +0000 (12:03 +0100)]
net: hns: Simplify the exception sequence in hns_ppe_init()
We need to free all ppe submodule if it fails to initialize ppe by
any fault, so this patch will free all ppe resource before
hns_ppe_init() returns exception situation
Kejian Yan [Sat, 1 Apr 2017 11:03:40 +0000 (12:03 +0100)]
net: hns: Remove the redundant adding and deleting mac function
The functions (hns_dsaf_set_mac_mc_entry() and hns_mac_del_mac()) are
not called by any functions. They are dead code in hns. And the same
features are implemented by the patch (the id is 66355f5).
netif_tx_lock is a global spin lock, it will take affect
in all rings in the netdevice. In tx_poll_one process, it can
only lock the current ring, in this case, we define a spin lock
in hnae_ring struct for it.
net: hns: Fix to adjust buf_size of ring according to mtu
Because buf_size of ring set to 2048, the process of rx_poll_one
can reuse the page, therefore the performance of XGE can improve.
But the chip only supports three bds in one package, so the max mtu
is 6K when it sets to 2048. For better performane in litter mtu, we
need change buf_size according to mtu.
When user change mtu, hns is only change the desc in memory. There
are some desc has been fetched by the chip, these desc can not be
changed by the code. So it needs set the port loopback and send
some packages to let the chip consumes the wrong desc and fetch new
desc.
Because the Pv660 do not support rss indirection, we need add version
check in mtu change process.
net: hns: Optimize hns_nic_common_poll for better performance
After polling less than buget packages, we need check again. If
there are still some packages, we call napi_schedule add softirq
queue, this is not better way. So we return buget value instead
of napi_schedule.
net: hns: Remove redundant memset during buffer release
Because all members of desc_cb is assigned when xmit one package, so it
can delete in hnae_free_buffer, as follows:
- "dma, priv, length, type" are assigned in fill_v2_desc.
- "page_offset, reuse_flag, buf" are not used in tx direction.
net: hns: Fix the implementation of irq affinity function
This patch fixes the implementation of the IRQ affinity
function. This function is used to create the cpu mask
which eventually is used to initialize the cpu<->queue
association for XPS(Transmit Packet Steering).
Simon Horman [Mon, 3 Apr 2017 19:42:58 +0000 (15:42 -0400)]
flow dissector: correct size of storage for ARP
The last argument to __skb_header_pointer() should be a buffer large
enough to store struct arphdr. This can be a pointer to a struct arphdr
structure. The code was previously using a pointer to a pointer to
struct arphdr.
By my counting the storage available both before and after is 8 bytes on
x86_64.
Jordan Crouse [Mon, 6 Feb 2017 17:39:29 +0000 (10:39 -0700)]
drm/msm: Make sure to detach the MMU during GPU cleanup
We should be detaching the MMU before destroying the address
space. To do this cleanly, the detach has to happen in
adreno_gpu_cleanup() because it needs access to structs
in adreno_gpu.c. Plus it is better symmetry to have
the attach and detach at the same code level.
Archit Taneja [Fri, 17 Mar 2017 03:39:48 +0000 (09:09 +0530)]
drm/msm/mdp5: Update SSPP_MAX value
'SSPP_MAX + 1' is the max number of hwpipes that can be present on a
MDP5 platform. Recently, 2 new cursor hwpipes were added, which
caused overflows in arrays that used SSPP_MAX to represent the number
of elements. Update the SSPP_MAX value to incorporate the extra
hwpipes.
Archit Taneja [Thu, 16 Feb 2017 10:59:04 +0000 (16:29 +0530)]
drm/msm/dsi: Fix bug in dsi_mgr_phy_enable
A recent commit introduces a bug in dsi_mgr_phy_enable. In the non
dual DSI mode, we reset the mdsi (master DSI) PHY. This isn't right
since master and slave DSI exist only in dual DSI mode. For the normal
mode of operation, we should simply reset the PHY of the DSI device
(i.e. msm_dsi) corresponding to the current bridge.
Usage of the wrong DSI pointer also resulted in a static checker
warning. That too is resolved with this fix.
CPU: 1 PID: 2323 Comm: drm-api-test Tainted: G W 4.9.0-rc4-00906-g693af44 #213
Hardware name: Qualcomm Technologies, Inc. DB820c (DT)
task: ffff8000d7353400 task.stack: ffff8000d7720000
PC is at drm_mm_insert_node_generic+0x258/0x2f0
LR is at drm_vma_offset_add+0x4c/0x70
Zero sized buffers serve no appreciable value to the user so disallow
them at create time.
Arnd Bergmann [Mon, 13 Mar 2017 16:43:48 +0000 (17:43 +0100)]
drm/msm: adreno: fix build error without debugfs
The newly added a5xx support fails to build when debugfs is diabled:
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:849:4: error: 'struct msm_gpu_funcs' has no member named 'show'
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:849:11: error: 'a5xx_show' undeclared here (not in a function); did you mean 'a5xx_irq'?
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"Four bug fixes, two of them for stable:
- avoid initrd corruptions in the kernel decompressor
- prevent inconsistent dumps if the boot CPU does not have address
zero
- fix the new pkey interface added with the merge window for 4.11
- a fix for a fix, another issue with user copy zero padding"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/uaccess: get_user() should zero on failure (again)
s390/pkey: Fix wrong handling of secure key with old MKVP
s390/smp: fix ipl from cpu with non-zero address
s390/decompressor: fix initrd corruption caused by bss clear
Sven Eckelmann [Sat, 1 Apr 2017 12:47:06 +0000 (14:47 +0200)]
batman-adv: Group ethtool related code together
The ethtool code was spread in soft-interface.c. This makes reading the
code and working on it unnecessary complicated. Having everything in a
common place next to the other code which references it, makes it slightly
easier.
Sven Eckelmann [Sat, 1 Apr 2017 12:47:05 +0000 (14:47 +0200)]
batman-adv: Remove ethtool .get_settings stub
The .get_settings function pointer and the related API was deprecated.
Fortunately, batman-adv is a virtual interface and never provided any
useful information via .get_settings. The stub can therefore be
removed.
This also avoids that incorrect information is shown in ethtool about the
batadv interface.
Sven Eckelmann [Sat, 1 Apr 2017 12:47:04 +0000 (14:47 +0200)]
batman-adv: Remove ethtool msglevel functions
batadv devices don't support msglevel. The ethtool stubs therefore returned
that it isn't supported. But instead, the complete function can be dropped
to avoid that bogus values are shown in ethtool.
Sven Eckelmann [Sat, 1 Apr 2017 12:47:03 +0000 (14:47 +0200)]
batman-adv: Use ethtool helper to get link status
The ethtool_ops of batman-adv never contained more than a stub for the
get_link function pointer. It was always returning that a link exists even
when the devices was not yet up and therefore nothing resampling a link
could have been available.
Instead use the ethtool helper which returns the current carrier state.
Make sure to reserve the boot memory for the flattened device tree.
Otherwise it might get overwritten, e.g. when initial_boot_params is
copied, leading to a corrupted FDT and a boot hang/crash:
bootconsole [early0] enabled
Early console on uart16650 initialized at 0xf8001600
OF: fdt: Error -11 processing FDT
Kernel panic - not syncing: setup_cpuinfo: No CPU found in devicetree!
---[ end Kernel panic - not syncing: setup_cpuinfo: No CPU found in devicetree!
Guenter Roeck says:
> I think I found the problem. In unflatten_and_copy_device_tree(), with added
> debug information:
>
> OF: fdt: initial_boot_params=c861e400, dt=c861f000 size=28874 (0x70ca)
>
> ... and then initial_boot_params is copied to dt, which results in corrupted
> fdt since the memory overlaps. Looks like the initial_boot_params memory
> is not reserved and (re-)allocated by early_init_dt_alloc_memory_arch().
net: ethernet: ti: cpsw: wake tx queues on ndo_tx_timeout
In case, if TX watchdog is fired some or all netdev TX queues will be
stopped and as part of recovery it is required not only to drain and
reinitailize CPSW TX channeles, but also wake up stoppted TX queues what
doesn't happen now and netdevice will stop transmiting data until
reopenned.
Hence, add netif_tx_wake_all_queues() call in .ndo_tx_timeout() to complete
recovery and restore TX path.
Sowmini Varadhan [Fri, 31 Mar 2017 22:56:31 +0000 (15:56 -0700)]
rds: tcp: canonical connection order for all paths with index > 0
The rds_connect_worker() has a bug in the check that enforces the
canonical connection order described in the comments of
rds_tcp_state_change(). The intention is to make sure that all
the multipath connections are always initiated by the smaller IP
address via rds_start_mprds. To achieve this, rds_connection_worker
should check that cp_index > 0.
Sowmini Varadhan [Fri, 31 Mar 2017 22:56:30 +0000 (15:56 -0700)]
rds: tcp: allow progress of rds_conn_shutdown if the rds_connection is marked ERROR by an intervening FIN
rds_conn_shutdown() runs in workq context, and marks the rds_connection
as DISCONNECTING before quiescing Tx/Rx paths. However, after all I/O
has quiesced, we may still find the rds_connection state to be
RDS_CONN_ERROR if an intervening FIN was processed in softirq context.
This is not a fatal error: rds_conn_shutdown() should continue the
shutdown, and there is no need to log noisy messages about this event.
Andrew Morton [Fri, 31 Mar 2017 20:09:41 +0000 (13:09 -0700)]
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c: fix build with gcc-4.4.4
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c: In function 'mlx5e_set_rxfh':
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:1067: error: unknown field 'rss' specified in initializer
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:1067: warning: missing braces around initializer
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:1067: warning: (near initialization for 'rrp.<anonymous>')
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:1068: error: unknown field 'rss' specified in initializer
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:1069: warning: excess elements in struct initializer
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:1069: warning: (near initialization for 'rrp')
gcc-4.4.4 has issues with anonymous union initializers. Work around this.
Andrew Morton [Fri, 31 Mar 2017 20:09:38 +0000 (13:09 -0700)]
drivers/net/ethernet/mellanox/mlx5/core/en_main.c: fix build with gcc-4.4.4
drivers/net/ethernet/mellanox/mlx5/core/en_main.c: In function 'mlx5e_redirect_rqts':
drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2210: error: unknown field 'rqn' specified in initializer
drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2211: warning: missing braces around initializer
drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2211: warning: (near initialization for 'direct_rrp.<anonymous>')
drivers/net/ethernet/mellanox/mlx5/core/en_main.c: In function 'mlx5e_redirect_rqts_to_channels':
drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2227: error: unknown field 'rss' specified in initializer
drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2227: warning: missing braces around initializer
drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2227: warning: (near initialization for 'rrp.<anonymous>')
drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2227: warning: initialization makes integer from pointer without a cast
drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2228: error: unknown field 'rss' specified in initializer
drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2229: warning: excess elements in struct initializer
drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2229: warning: (near initialization for 'rrp')
drivers/net/ethernet/mellanox/mlx5/core/en_main.c: In function 'mlx5e_redirect_rqts_to_drop':
drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2238: error: unknown field 'rqn' specified in initializer
drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2239: warning: missing braces around initializer
drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2239: warning: (near initialization for 'drop_rrp.<anonymous>')
gcc-4.4.4 has issues with anonymous union initializers. Work around this.
Joao Pinto [Fri, 31 Mar 2017 13:22:02 +0000 (14:22 +0100)]
net: stmmac: fix cbs configuration
Sending again, because forgot to include net-dev.
The QoS IP does not accept AVB capabilities to default/queue 0, this way we
guarantee 75% bandwidth for AVB. This patch assures that only queues >= 1
gets CBS confgured. Additional info was also added to stmmac.txt.
Merge tag 'dmaengine-fix-4.11-rc5' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"A couple of minor fixes for 4.11:
- array bound fix for __get_unmap_pool()
- cyclic period splitting for bcm2835"
* tag 'dmaengine-fix-4.11-rc5' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: Fix array index out of bounds warning in __get_unmap_pool()
dmaengine: bcm2835: Fix cyclic DMA period splitting
projects / linux.git / log