Mark Brown [Mon, 9 Feb 2015 07:09:48 +0000 (15:09 +0800)]
Merge tag 'asoc-v3.19-rc2' into asoc-linus
ASoC: Updates for v3.20
Nothing too exciting here yet, a small optimization for DAPM from
Lars-Peter and a few small bits and pieces for drivers but nothing
that really stands out.
# gpg: Signature made Tue 30 Dec 2014 00:15:48 HKT using RSA key ID 5D5487D0
# gpg: Oops: keyid_from_fingerprint: no pubkey
# gpg: key AF88CD16: no public key for trusted key - skipped
# gpg: key AF88CD16 marked as ultimately trusted
# gpg: key 5621E907: no public key for trusted key - skipped
# gpg: key 5621E907 marked as ultimately trusted
# gpg: Good signature from "Mark Brown <[email protected]>"
# gpg: aka "Mark Brown <[email protected]>"
# gpg: aka "Mark Brown <[email protected]>"
# gpg: aka "Mark Brown <[email protected]>"
# gpg: aka "Mark Brown <[email protected]>"
# gpg: aka "Mark Brown <[email protected]>"
ARM: dts: Exynos4 and Odroid X2/U3 sound device nodes update
Clock related properties are added to the Exynos4 I2S device nodes
so they can be referred to as clock providers. Missing i2s_opclk1
clock is added to the I2S0 node and clock properties are added
to the MAX98090 codec node to allow it to control/read frequency
of the MCLK clock directly.
Eric Dumazet [Mon, 9 Feb 2015 04:39:13 +0000 (20:39 -0800)]
net:rfs: adjust table size checking
Make sure root user does not try something stupid.
Also make sure mask field in struct rps_sock_flow_table
does not share a cache line with the potentially often dirtied
flow table.
Signed-off-by: Eric Dumazet <[email protected]> Fixes: 567e4b79731c ("net: rfs: add hash collision detection") Signed-off-by: David S. Miller <[email protected]>
Handle clip_tbl debugfs entry, when clip_tbl isn't allocated.
In commit b5a02f503caa0837 ("cxgb4: Update ipv6 address handling api") wrong
argument was passed for single_open for clip_tbl debugfs entry, which led to
below trace. Fixing it.
Mitch Williams [Fri, 9 Jan 2015 11:18:17 +0000 (11:18 +0000)]
i40evf: ignore bogus messages from FW
Occasionally on shutdown, the FW will hand us a bunch of messages filled
with zeros, which can cause us to spin trying to handle them. Just
ignore these and get on with shutting down.
Mitch Williams [Fri, 9 Jan 2015 11:18:16 +0000 (11:18 +0000)]
i40evf: reset on module unload
When the module is being unloaded, don't wait for the PF to politely
handle all of our admin queue requests, as that might take forever with
a lot of VFs enabled. Instead, just stop everything and request a VF
reset.
When the original shutdown code was written, VF resets were unreliable,
so we avoided them. But with production hardware and firmware, and the
1.x PF driver, this is no longer the case.
This fixes a potential multi-minute delay on driver unload, VF disable,
or system shutdown.
Mitch Williams [Fri, 9 Jan 2015 11:18:15 +0000 (11:18 +0000)]
i40e: add locking around VF reset
During VF deallocation, we need to lock out the VF reset code. However,
we cannot depend on simply masking the interrupt, as this does not lock
out the service task, which can still call the reset routine. Instead,
leave the interrupt enabled, but add locking around the VF disable and
reset routines.
For the disable code, we wait to get the lock, as the reset code will
take a finite amount of time to run. For the reset code, we just return
if we fail to get the lock. Since we know that the VFs are being
disabled, we don't need to handle the reset.
This fixes a panic when disabling SR-IOV.
Mitch Williams [Fri, 9 Jan 2015 11:18:14 +0000 (11:18 +0000)]
i40e: Use even more ARQ descriptors
When enabling 64 VFs and loading the VF driver in the host kernel, we
can easily overrun the PF's admin receive queue. Double the size of this
queue, and increase the work limit to allow the PF to handle more
requests in a single pass through the service task.
John W Linville [Wed, 14 Jan 2015 03:06:28 +0000 (03:06 +0000)]
i40e: avoid use of uninitialized v_budget in i40e_init_msix
This I40E_FCOE block increments v_budget before it has been initialized,
then v_budget gets overwritten a few lines later. This patch just
reorders the code hunks in what I believe was the intended sequence.
Linus Torvalds [Mon, 9 Feb 2015 02:08:14 +0000 (18:08 -0800)]
Merge tag 'trace-fixes-v3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull ftrace fixes from Steven Rostedt:
"During testing Sedat Dilek hit a "suspicious RCU usage" splat that
pointed out a real bug. During suspend and resume the tlb_flush
tracepoint is called when the CPU is going offline. As the CPU has
been noted as offline, RCU is ignoring that CPU, which means that it
can not use RCU protected locks. When tracepoints are activated, they
require RCU locking, and if RCU is ignoring a CPU that runs a
tracepoint, there is a chance that the tracepoint could cause
corruption.
The solution was to change the tracepoint into a
TRACE_EVENT_CONDITION() which allows us to check a condition to
determine if the tracepoint should be called or not. If the condition
is not met, the rcu protected code will not be executed. By adding
the condition "cpu_online(smp_processor_id())", this will prevent the
RCU protected code from being executed if the CPU is marked offline.
After adding this, another bug was discovered. As RCU checks rcu
callers, if a rcu call is not done, there is no check (obviously). We
found that tracepoints could be added in RCU ignored locations and not
have lockdep complain until the tracepoint is activated. This missed
places where tracepoints were added in places they should not have
been. To fix this, code was added in 3.18 that if lockdep is enabled,
any tracepoint will still call the rcu checks even if the tracepoint
is not enabled. The bug here, is that the check does not take the
CONDITION into account. As the condition may prevent tracepoints from
being activated in RCU ignored areas (as the one patch does), we get
false positives when we enable lockdep and hit a tracepoint that the
condition prevents it from being called in a RCU ignored location.
The fix for this is to add the CONDITION to the rcu checks, even if
the tracepoint is not enabled"
* tag 'trace-fixes-v3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
x86/tlb/trace: Do not trace on CPU that is offline
tracing: Add condition check to RCU lockdep checks
src_ip is a pointer to a union vxlan_addr, one member of which is a
struct sockaddr. Passing a pointer to src_ip is wrong; one should pass
the value of src_ip itself. Since %pIS formally expects something of
type struct sockaddr*, let's pass a pointer to the appropriate union
member, though this of course doesn't change the generated code.
Eric Dumazet [Fri, 6 Feb 2015 20:59:01 +0000 (12:59 -0800)]
net: rfs: add hash collision detection
Receive Flow Steering is a nice solution but suffers from
hash collisions when a mix of connected and unconnected traffic
is received on the host, when flow hash table is populated.
Also, clearing flow in inet_release() makes RFS not very good
for short lived flows, as many packets can follow close().
(FIN , ACK packets, ...)
This patch extends the information stored into global hash table
to not only include cpu number, but upper part of the hash value.
I use a 32bit value, and dynamically split it in two parts.
For host with less than 64 possible cpus, this gives 6 bits for the
cpu number, and 26 (32-6) bits for the upper part of the hash.
Since hash bucket selection use low order bits of the hash, we have
a full hash match, if /proc/sys/net/core/rps_sock_flow_entries is big
enough.
If the hash found in flow table does not match, we fallback to RPS (if
it is enabled for the rxqueue).
This means that a packet for an non connected flow can avoid the
IPI through a unrelated/victim CPU.
This also means we no longer have to clear the table at socket
close time, and this helps short lived flows performance.
Sabrina Dubroca [Fri, 6 Feb 2015 16:22:22 +0000 (17:22 +0100)]
gre/ipip: use be16 variants of netlink functions
encap.sport and encap.dport are __be16, use nla_{get,put}_be16 instead
of nla_{get,put}_u16.
Fixes the sparse warnings:
warning: incorrect type in assignment (different base types)
expected restricted __be32 [addressable] [usertype] o_key
got restricted __be16 [addressable] [usertype] i_flags
warning: incorrect type in assignment (different base types)
expected restricted __be16 [usertype] sport
got unsigned short
warning: incorrect type in assignment (different base types)
expected restricted __be16 [usertype] dport
got unsigned short
warning: incorrect type in argument 3 (different base types)
expected unsigned short [unsigned] [usertype] value
got restricted __be16 [usertype] sport
warning: incorrect type in argument 3 (different base types)
expected unsigned short [unsigned] [usertype] value
got restricted __be16 [usertype] dport
Hans de Goede [Sat, 7 Feb 2015 08:53:53 +0000 (09:53 +0100)]
ACPI / video: Add disable_native_backlight quirk for Samsung 510R
Backlight control through the native intel interface does not work properly
on the Samsung 510R, where as using the acpi_video interface does work, add
a quirk for this.
In commit 5de21bb998b8 ("ACPI / PM: Drop CONFIG_PM_RUNTIME from the
ACPI core"), all occurrences of CONFIG_PM_RUNTIME were replaced with
CONFIG_PM. This created the following structure of #ifdef blocks in
the code:
This patch removes the inner "#ifdef CONFIG_PM" block as it will
always be enabled when the outer block is enabled. This inconsistency
was found using the undertaker-checkpatch tool.
USB / PM: Remove unneeded #ifdef and associated dead code
In commit ceb6c9c862c8 ("USB / PM: Drop CONFIG_PM_RUNTIME from the
USB core"), all occurrences of CONFIG_PM_RUNTIME in the USB core
code were replaced by CONFIG_PM. This created the following structure
of #ifdef blocks in drivers/usb/core/hub.c:
[...]
#ifdef CONFIG_PM
#ifdef CONFIG_PM
/* always on / undead */
#else
/* dead */
#endif
[...]
This patch removes unnecessary inner "#ifdef CONFIG_PM" as well as
the corresponding dead #else block. This inconsistency was found using
the undertaker-checkpatch tool.
Jon Paul Maloy [Sun, 8 Feb 2015 16:10:50 +0000 (11:10 -0500)]
tipc: fix bug in socket reception function
In commit c637c1035534867b85b78b453c38c495b58e2c5a ("tipc: resolve race
problem at unicast message reception") we introduced a time limit
for how long the function tipc_sk_eneque() would be allowed to execute
its loop. Unfortunately, the test for when this limit is passed was put
in the wrong place, resulting in a lost message when the test is true.
We fix this by moving the test to before we dequeue the next buffer
from the input queue.
Michael Büsch [Sun, 8 Feb 2015 09:14:07 +0000 (10:14 +0100)]
rt6_probe_deferred: Do not depend on struct ordering
rt6_probe allocates a struct __rt6_probe_work and schedules a work handler rt6_probe_deferred.
But rt6_probe_deferred kfree's the struct work_struct instead of struct __rt6_probe_work.
This works, because struct work_struct is the first element of struct __rt6_probe_work.
Change it to kfree struct __rt6_probe_work to not implicitly depend on
struct work_struct being the first element.
ALSA: control: fix failure to return numerical ID in 'add' event
Currently when adding a new control, the assigned numerical ID is not
set for event data, thus userspace applications cannot realize it just
by event data.
David S. Miller [Sun, 8 Feb 2015 09:03:26 +0000 (01:03 -0800)]
Merge branch 'tcp_ack_loops'
Neal Cardwellsays:
====================
tcp: mitigate TCP ACK loops due to out-of-window validation dupacks
This patch series mitigates "ack loop" DoS scenarios by rate-limiting
outgoing duplicate ACKs sent in response to incoming "out of window"
segments.
Background
-----------
There are several cases in which the TCP RFCs specify that a TCP
endpoint should send a pure duplicate ACK in response to a pure
duplicate ACK that appears to be invalid due to being "out of window":
(1) RFC 793 (section 3.9, page 69) specifies that endpoints should
send a duplicate ACK in response to an ACK when the incoming
sequence number is invalid due to being outside the receive
window: "If an incoming segment is not acceptable, an
acknowledgment should be sent in reply".
(2) RFC 793 (section 3.9, page 72) says: "If the ACK acknowledges
something not yet sent (SEG.ACK > SND.NXT) then send an ACK".
(3) RFC 1323 (section 4.2.1, page 18) specifies that endpoints should
send a duplicate ACK in response to an ACK when the PAWS check for
the incoming timestamp value fails: "If .... SEG.TSval < TS.Recent
and if TS.Recent is valid ... Send an acknowledgement in reply"
The problem
------------
Normally, this is not a problem. However, a buggy middlebox or
malicious man-in-the-middle can inject a few packets into the
conversation that advance each endpoint's notion of the current window
(sequence, ACK, or timestamp), without either side noticing. In this
case, from then on each side can think the other is sending invalid
segments. Thus an infinite feedback loop of duplicate ACKs can ensue,
as each endpoint receives a duplicate ACK, decides that it is invalid
(due to sequence number, ACK number, or timestamp), and then sends a
dupack in reply, which the other side decides is invalid, responding
with a dupack... ad infinitum. This ping-pong feedback loop can happen
at a very high rate.
This phenomenon can and does happen in practice. It has been seen in
datacenter and Internet contexts at Google, and has been documented by
Anil Agarwal in the Nov 2013 tcpm thread "TCP mismatched sequence
numbers issue", and Avery Fay in the Feb 2015 Linux netdev thread
"Invalid timestamp? causing tight ack loop (hundreds of thousands of
packets / sec)".
This patch series
------------------
This patch series mitigates such ack loops by rate-limiting outgoing
duplicate ACKs sent in response to incoming TCP packets that are for
an existing connection but that are invalid due to any of the reasons
mentioned above: sequence number (1), ACK field (2), or timestamp
value (3). The rate limit for such duplicate ACKs is specified by a
new sysctl, tcp_invalid_ratelimit, which specifies the minimal space
between such outbound duplicate ACKs, in milliseconds. The default is
500 (500ms), and 0 disables the mechanism.
We rate-limit these duplicate ACK responses rather than blocking them
entirely or resetting the connection, because legitimate connections
can rely on dupacks in response to some out-of-window segments. For
example, zero window probes are typically sent with a sequence number
that is below the current window, and ZWPs thus expect to thus elicit
a dupack in response.
Testing: this approach has been in use at Google for a while.
====================
Neal Cardwell [Fri, 6 Feb 2015 21:04:41 +0000 (16:04 -0500)]
tcp: mitigate ACK loops for connections as tcp_timewait_sock
Ensure that in state FIN_WAIT2 or TIME_WAIT, where the connection is
represented by a tcp_timewait_sock, we rate limit dupacks in response
to incoming packets (a) with TCP timestamps that fail PAWS checks, or
(b) with sequence numbers that are out of the acceptable window.
We do not send a dupack in response to out-of-window packets if it has
been less than sysctl_tcp_invalid_ratelimit (default 500ms) since we
last sent a dupack in response to an out-of-window packet.
Neal Cardwell [Fri, 6 Feb 2015 21:04:40 +0000 (16:04 -0500)]
tcp: mitigate ACK loops for connections as tcp_sock
Ensure that in state ESTABLISHED, where the connection is represented
by a tcp_sock, we rate limit dupacks in response to incoming packets
(a) with TCP timestamps that fail PAWS checks, or (b) with sequence
numbers or ACK numbers that are out of the acceptable window.
We do not send a dupack in response to out-of-window packets if it has
been less than sysctl_tcp_invalid_ratelimit (default 500ms) since we
last sent a dupack in response to an out-of-window packet.
There is already a similar (although global) rate-limiting mechanism
for "challenge ACKs". When deciding whether to send a challence ACK,
we first consult the new per-connection rate limit, and then the
global rate limit.
Neal Cardwell [Fri, 6 Feb 2015 21:04:39 +0000 (16:04 -0500)]
tcp: mitigate ACK loops for connections as tcp_request_sock
In the SYN_RECV state, where the TCP connection is represented by
tcp_request_sock, we now rate-limit SYNACKs in response to a client's
retransmitted SYNs: we do not send a SYNACK in response to client SYN
if it has been less than sysctl_tcp_invalid_ratelimit (default 500ms)
since we last sent a SYNACK in response to a client's retransmitted
SYN.
This allows the vast majority of legitimate client connections to
proceed unimpeded, even for the most aggressive platforms, iOS and
MacOS, which actually retransmit SYNs 1-second intervals for several
times in a row. They use SYN RTO timeouts following the progression:
1,1,1,1,1,2,4,8,16,32.
Neal Cardwell [Fri, 6 Feb 2015 21:04:38 +0000 (16:04 -0500)]
tcp: helpers to mitigate ACK loops by rate-limiting out-of-window dupacks
Helpers for mitigating ACK loops by rate-limiting dupacks sent in
response to incoming out-of-window packets.
This patch includes:
- rate-limiting logic
- sysctl to control how often we allow dupacks to out-of-window packets
- SNMP counter for cases where we rate-limited our dupack sending
The rate-limiting logic in this patch decides to not send dupacks in
response to out-of-window segments if (a) they are SYNs or pure ACKs
and (b) the remote endpoint is sending them faster than the configured
rate limit.
We rate-limit our responses rather than blocking them entirely or
resetting the connection, because legitimate connections can rely on
dupacks in response to some out-of-window segments. For example, zero
window probes are typically sent with a sequence number that is below
the current window, and ZWPs thus expect to thus elicit a dupack in
response.
We allow dupacks in response to TCP segments with data, because these
may be spurious retransmissions for which the remote endpoint wants to
receive DSACKs. This is safe because segments with data can't
realistically be part of ACK loops, which by their nature consist of
each side sending pure/data-less ACKs to each other.
The dupack interval is controlled by a new sysctl knob,
tcp_invalid_ratelimit, given in milliseconds, in case an administrator
needs to dial this upward in the face of a high-rate DoS attack. The
name and units are chosen to be analogous to the existing analogous
knob for ICMP, icmp_ratelimit.
The default value for tcp_invalid_ratelimit is 500ms, which allows at
most one such dupack per 500ms. This is chosen to be 2x faster than
the 1-second minimum RTO interval allowed by RFC 6298 (section 2, rule
2.4). We allow the extra 2x factor because network delay variations
can cause packets sent at 1 second intervals to be compressed and
arrive much closer.
Chris Rorvick [Sat, 7 Feb 2015 16:43:19 +0000 (10:43 -0600)]
ALSA: line6: Pass driver name to line6_probe()
Provide a unique name for each driver instead of using "line6usb" for
all of them. This will allow for different configurations based on the
driver type.
Chris Rorvick [Sat, 7 Feb 2015 16:43:18 +0000 (10:43 -0600)]
ALSA: line6: Pass toneport pointer to toneport_has_led()
It is unlikely this function would ever be used in a context without a
pointer to a `struct usb_line6_toneport', so grab the device type from
it rather than having the caller do it.
David S. Miller [Sun, 8 Feb 2015 06:53:03 +0000 (22:53 -0800)]
Merge branch 'cxgb4'
Hariprasad Shenai says:
====================
Add support to dump some hw debug info
This patch series adds support to dump sensor info, dump Transport Processor
event trace, dump Upper Layer Protocol RX module command trace, dump mailbox
contents and dump Transport Processor congestion control configuration.
Will send a separate patch series for all the hw stats patches, by moving them
to ethtool.
The patches series is created against 'net-next' tree.
And includes patches on cxgb4 driver.
We have included all the maintainers of respective drivers. Kindly review the
change and let us know in case of any review comments.
V2: Dopped all hw stats related patches. Added a new patch which adds support to
dump congestion control table.
====================
David S. Miller [Sun, 8 Feb 2015 06:51:02 +0000 (22:51 -0800)]
Merge branch 'be2net'
Sathya Perla says:
====================
be2net: patch set
Hi Dave, pls consider applying the following patch-set to the
net-next tree. It has 5 code/style cleanup patches and 4 patches that
add functionality to the driver.
Patch 1 moves routines that were not needed to be in be.h to the respective
src files, to avoid unnecessary compilation.
Patch 2 replaces (1 << x) with BIT(x) macro
Patch 3 refactors code that checks if a FW flash file is compatible
with the adapter. The code is now refactored into 2 routines, the first one
gets the file type from the image file and the 2nd routine checks if the
file type is compatible with the adapter.
Patch 4 adds compatibility checks for flashing a FW image on the new
Skyhawk P2 HW revision.
Patch 5 adds support for a new "offset based" flashing scheme, wherein
the driver informs the FW of the offset at which each component in the flash
file is to be flashed at. This helps flashing components that were
previously not recognized by the running FW.
Patch 6 simplifies the be_cmd_rx_filter() routine, by passing to it the
filter flags already used in the FW cmd, instead of the netdev flags that
were converted to the FW-cmd flags.
Patch 7 introduces helper routines in be_set_rx_mode() and be_vid_config()
to improve code readability.
Patch 8 adds processing of port-misconfig async event sent by the FW.
Patch 9 removes unnecessary swapping of a field in the TX desc.
====================
Sathya Perla [Fri, 6 Feb 2015 13:18:43 +0000 (08:18 -0500)]
be2net: avoid unncessary swapping of fields in eth_tx_wrb
The 32-bit fields of a tx-wrb are little endian. The driver is currently
using be_dws_le_to_cpu() routine to swap (cpu to le) all the fields of
a tx-wrb. So, the rsvd field is also unnecessarily swapped.
This patch fixes this by individually swapping the required fields.
Also, the type of the fields in eth_tx_wrb{} is now changed to __le32
from u32 to avoid sparse warnings.
This patch adds support for processing the port misconfigure async
event generated by the FW. This event is generated typically when an
optical module is incorrectly installed or is faulty.
This patch also moves the port_name field to the adapter struct for
logging the event. As the be_cmd_query_port_name() call is now moved
to be_get_config(), it is modified to use the mailbox instead of MCCQ
Sathya Perla [Fri, 6 Feb 2015 13:18:41 +0000 (08:18 -0500)]
be2net: refactor be_set_rx_mode() and be_vid_config() for readability
This patch re-factors the filter setting (uc-list, mc-list, promisc, vlan)
code in be_set_rx_mode() and be_vid_config() to make it more readable
and reduce code duplication.
This patch adds a separate field to track the state/mode of filtering,
along with moving all the filtering related fields to one place in be
be_adapter structure.
Sathya Perla [Fri, 6 Feb 2015 13:18:40 +0000 (08:18 -0500)]
be2net: remove duplicate code in be_cmd_rx_filter()
This patch passes BE_IF_FLAGS_XXX flags to be_cmd_rx_filter() routine
instead of the IFF_XXX flags. Doing this gets rid of the code to convert
the IFF_XXX flags to the BE_IF_FLAGS_XXX used by the FW cmd. The patch
also removes code for setting if_flags_mask that was duplicated for each
filter mode.
be2net: use offset based FW flashing for Skyhawk chip
While sending FW update cmds to the FW, the driver specifies the "type"
of each component that needs to be flashed. The FW then picks the offset
in the flash area at which the componnet is to be flashed. This doesn't work
when new components that the current FW doesn't recognize, need to be
flashed. Recent FWs (10.2 and above) support a scheme of FW-update wherein
the "offset" of the component in the flash area can be specified instead
of the "type". This patch uses the "offset" based FW-update mechanism and
only when it fails, it fallsback to the old "type" based update.
be2net: refactor code that checks flash file compatibility
This patch re-factors the code that checks for flash file compatibility with
the chip type, for better readability, as follows:
- be_get_ufi_type() returns the UFI type from the flash file
- be_check_ufi_compatibility() checks if the UFI type is compatible
with the adapter/chip that is being flashed
Sathya Perla [Fri, 6 Feb 2015 13:18:35 +0000 (08:18 -0500)]
be2net: move un-exported routines from be.h to respective src files
Routines that are called only inside one src file must remain in that
file itself. Including them in a header file that is used for exporting
routine/struct definitions, causes unnecessary compilation of other
src files, when such a routine is modified.
Roopa Prabhu [Fri, 6 Feb 2015 06:24:45 +0000 (22:24 -0800)]
bridge: add missing bridge port check for offloads
This patch fixes a missing bridge port check caught by smatch.
setlink/dellink of attributes like vlans can come for a bridge device
and there is no need to offload those today. So, this patch adds a bridge
port check. (In these cases however, the BRIDGE_SELF flags will always be set
and we may not hit a problem with the current code).
smatch complaint:
The patch 68e331c785b8: "bridge: offload bridge port attributes to
switch asic if feature flag set" from Jan 29, 2015, leads to the
following Smatch complaint:
net/bridge/br_netlink.c:552 br_setlink()
error: we previously assumed 'p' could be null (see line 518)
net/bridge/br_netlink.c
517
518 if (p && protinfo) {
^
Check for NULL.
David S. Miller [Sun, 8 Feb 2015 06:48:50 +0000 (22:48 -0800)]
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2015-02-05
This series contains updates to fm10k, ixgbe and ixgbevf.
Matthew fixes an issue where fm10k does not properly drop the upper-most four
bits on of the VLAN ID due to type promotion, so resolve the issue by not
masking off the bits, but by throwing an error if the VLAN ID is out-of-bounds.
Then cleans up two cases where variables were not being used, but were
being set, so just remove the unused variables.
Don cleans up sparse errors in the x550 family file for ixgbe. Fixed up
a redundant setting of the default value for set_rxpba, which was done
twice accidentally. Cleaned up the probe routine to remove a redundant
attempt to identify the PHY, which could lead to a panic on x550. Added
support for VXLAN receive checksum offload in x550 hardware. Added the
Ethertype Anti-spoofing feature for affected devices.
Emil enables ixgbe and ixgbevf to allow multiple queues in SRIOV mode.
Adds RSS support for x550 per VF. Fixed up a couple of issues introduced
in commit 2b509c0cd292 ("ixgbe: cleanup ixgbe_ndo_set_vf_vlan"), fixed
setting of the VLAN inside ixgbe_enable_port_vlan() and disable the
"hide VLAN" bit in PFQDE when port VLAN is disabled. Cleaned up the
setting of vlan_features by enabling all features at once. Fixed the
ordering of the shutdown patch so that we attempt to shutdown the rings
more gracefully. We shutdown the main Rx filter in the case of Rx and we
set the carrier_off state in the case of Tx so that packets stop being
delivered from outside the driver. Then we shutdown interrupts and NAPI,
then finally stop the rings from performing DMA and clean them. Added
code to allow for Tx hang checking to provide more robust debug info in
the event of a transmit unit hang in ixgbevf. Cleaned up ixgbevf logic
dealing with link up/down by breaking down the link detection and up/down
events into separate functions, similar to how these events are handled
in other drivers. Combined the ixgbevf reset and watchdog tasks into a
single task so that we can avoid multiple schedules of the reset task when
we have a reset event needed due to either the mailbox going down or
transmit packets being present on a link down.
v2: Fixed up patch #03 of the series to remove the variable type change
based on feedback from David Laight
====================
amd-xgbe: Check per channel DMA interrupt use in main ISR
When using per channel DMA interrupts the transmit interrupt (TI) and the
receive interrupt (RI) are masked off so as to not generate an interrupt
to the main ISR. However, should another interrupt fire for the DMA channel
that is handled by the main ISR the TI/RI bits can still be set. This
will cause the wrong and uninitialized napi structure to be used causing a
panic. Add a check to be sure per channel DMA interrupts are not enabled
before acting on those bit flags.
rds: Make rds_message_copy_from_user() return 0 on success.
Commit 083735f4b01b ("rds: switch rds_message_copy_from_user() to iov_iter")
breaks rds_message_copy_from_user() semantics on success, and causes it
to return nbytes copied, when it should return 0. This commit fixes that bug.
Jarno Rajahalme [Thu, 5 Feb 2015 21:40:49 +0000 (13:40 -0800)]
net: openvswitch: Support masked set actions.
OVS userspace already probes the openvswitch kernel module for
OVS_ACTION_ATTR_SET_MASKED support. This patch adds the kernel module
implementation of masked set actions.
The existing set action sets many fields at once. When only a subset
of the IP header fields, for example, should be modified, all the IP
fields need to be exact matched so that the other field values can be
copied to the set action. A masked set action allows modification of
an arbitrary subset of the supported header bits without requiring the
rest to be matched.
Masked set action is now supported for all writeable key types, except
for the tunnel key. The set tunnel action is an exception as any
input tunnel info is cleared before action processing starts, so there
is no tunnel info to mask.
The kernel module converts all (non-tunnel) set actions to masked set
actions. This makes action processing more uniform, and results in
less branching and duplicating the action processing code. When
returning actions to userspace, the fully masked set actions are
converted back to normal set actions. We use a kernel internal action
code to be able to tell the userspace provided and converted masked
set actions apart.
David S. Miller [Sun, 8 Feb 2015 06:38:45 +0000 (22:38 -0800)]
Merge branch 'dsa-next'
Florian Fainelli says:
====================
net: dsa: bcm_sf2: GPHY power down
This patch series implement GPHY power up and down in the SF2 switch
driver in order to conserve power whenever possible (e.g: port is brought
down or unused during Wake-on-LAN).
====================
Implement the power on/off recommended procedure for the Single GPHY we
have on our Starfighter 2 switch. In order to make sure we get proper
LED link/activity signaling during suspend, switch the link indication
from the Switch/MAC to the PHY.
Finally, since the GPHY needs to be reset to be put in low power mode,
we will loose any context applied to it: workarounds, EEE etc.. so we
need to call phy_init_hw() to get our fixups re-applied successfully.
net: dsa: bcm_sf2: move GPHY enabling to its own function
Move the code that touches the single GPHY register from
bcm_sf2_sw_resume() to a separate function since we will have to
enable/disable the GPHY from different locations, and we want the code
to be self-contained.
David S. Miller [Sun, 8 Feb 2015 06:22:25 +0000 (22:22 -0800)]
Merge tag 'nfc-next-3.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next
NFC: 3.20 second pull request
This is the second NFC pull request for 3.20.
It brings:
- NCI NFCEE (NFC Execution Environment, typically an embedded or
external secure element) discovery and enabling/disabling support.
In order to communicate with an NFCEE, we also added NCI's logical
connections support to the NCI stack.
- HCI over NCI protocol support. Some secure elements only understand
HCI and thus we need to send them HCI frames when they're part of
an NCI chipset.
- NFC_EVT_TRANSACTION userspace API addition. Whenever an application
running on a secure element needs to notify its host counterpart,
we send an NFC_EVENT_SE_TRANSACTION event to userspace through the
NFC netlink socket.
- Secure element and HCI transaction event support for the st21nfcb
chipset.
Daniel Borkmann [Thu, 5 Feb 2015 17:44:04 +0000 (18:44 +0100)]
rtnetlink: ifla_vf_policy: fix misuses of NLA_BINARY
ifla_vf_policy[] is wrong in advertising its individual member types as
NLA_BINARY since .type = NLA_BINARY in combination with .len declares the
len member as *max* attribute length [0, len].
The issue is that when do_setvfinfo() is being called to set up a VF
through ndo handler, we could set corrupted data if the attribute length
is less than the size of the related structure itself.
The intent is exactly the opposite, namely to make sure to pass at least
data of minimum size of len.
dsa: correctly determine the number of switches in a system
The number of connected switches was sourced from the number of
children to the DSA node, change it to the number of available
children, skipping any disabled switches.
Fixes: 5e95329b701c4 ("dsa: add device tree bindings to register DSA switches") Signed-off-by: Tobias Waldekranz <[email protected]> Acked-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Mark Brown [Sun, 8 Feb 2015 03:16:38 +0000 (11:16 +0800)]
Merge tag 'spi-v3.19-rc7' into spi-linus
spi: Fixes for v3.19
A couple of driver specific fixes:
- Disable DMA mode for i.MX6DL chips due to a hardware bug.
- Don't use devm_kzalloc() outside of bind/unbind paths in the fsl-dspi
driver, fixing memory leaks.
# gpg: Signature made Thu 05 Feb 2015 05:06:57 HKT using RSA key ID 5D5487D0
# gpg: WARNING: digest algorithm MD5 is deprecated
# gpg: please see http://www.gnupg.org/faq/weak-digest-algos.html for more information
# gpg: Oops: keyid_from_fingerprint: no pubkey
# gpg: key AF88CD16: no public key for trusted key - skipped
# gpg: key AF88CD16 marked as ultimately trusted
# gpg: key 5621E907: no public key for trusted key - skipped
# gpg: key 5621E907 marked as ultimately trusted
# gpg: Good signature from "Mark Brown <[email protected]>"
# gpg: aka "Mark Brown <[email protected]>"
# gpg: aka "Mark Brown <[email protected]>"
# gpg: aka "Mark Brown <[email protected]>"
# gpg: aka "Mark Brown <[email protected]>"
# gpg: aka "Mark Brown <[email protected]>"
Mark Brown [Sun, 8 Feb 2015 03:16:30 +0000 (11:16 +0800)]
Merge remote-tracking branches 'regulator/topic/rk808', 'regulator/topic/rpm', 'regulator/topic/rt5033' and 'regulator/topic/tps65023' into regulator-next
projects / linux.git / log