Jani Nikula [Fri, 9 Aug 2024 14:27:03 +0000 (17:27 +0300)]
drm/i915/acpi: convert to struct intel_display
Going forward, struct intel_display shall replace struct
drm_i915_private as the main display device data pointer type. Convert
intel_acpi.[ch] to struct intel_display.
Jani Nikula [Tue, 6 Aug 2024 13:38:32 +0000 (16:38 +0300)]
drm/i915: remove __i915_printk()
With the previous cleanups, the last remaining user of __i915_printk()
is i915_probe_error(). Switch that to use drm_dbg() and drm_err()
instead, dropping the request to report bugs in the few remaining
specific cases.
It's not common for drivers to log bug filing requests to begin with,
but these cases are in init, which is most likely to be tested in CI and
least likely to be hit by end users anyway.
Jani Nikula [Tue, 6 Aug 2024 13:38:31 +0000 (16:38 +0300)]
drm/i915: remove i915_report_error()
i915_report_error() presently acts as a wrapper for __i915_printk(). In
practice, it would be better to use drm level error reporting wherever
possible, so replace all uses of i915_report_error() with the equivalent
drm_err() call. These cases are not worth having a dedicated wrapper to
also print bug reporting info. Replacing the calls leaves
i915_report_error() with no users, so remove it.
Imre Deak [Mon, 5 Aug 2024 15:07:56 +0000 (18:07 +0300)]
drm/i915: Remove DSC register dump
The Display Engine's DSC register values are deducted from the DSC
configuration stored in intel_crtc_state::dsc. The latter one is
dumped in a human-readable format, so dumping the register values is
redundant, remove it.
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality or semantics.
Imre Deak [Mon, 22 Jul 2024 16:55:02 +0000 (19:55 +0300)]
drm/i915/dp_mst: Ensure link parameters are up-to-date for a disabled link
As explained in the previous patch, the MST link BW reported by branch
devices during topology probing/path resources enumeration depends on
the link parameters programmed to DPCD to be up-to-date. After a sink is
plugged this is not ensured, as those DPCD values start out zeroed. The
target link parameters (for a subsequent modeset) are the maximum that
is supported, so make sure these maximum values are programmed before the
topology probing.
Imre Deak [Mon, 22 Jul 2024 16:55:01 +0000 (19:55 +0300)]
drm/i915/dp_mst: Reprobe the MST topology after a link parameter change
The MST link BW reported by branch devices via the ENUM_PATH_RESOURCES
message depends on the channel coding and link rate/lane count
parameters programmed to DPCD. This is the case at least for some branch
devices, while for others the reported BW is independent of the link
parameters. In any case the DP standard requires the branch device to
adjust the returned value to both account for the different way the BW
for FEC is accounted for (included in the returned value for non-UHBR
and not included for UHBR rates) and to limit the returned value to the
(trained) link BW between the source and first downstream branch
device, see DP v2.0/v2.1 Figure 2-94, DP v2.1 5.9.7. Presumedly this is
also the reason why the standard requires the DPCD link rate/lane count
values being up-to-date before sending the ENUM_PATH_RESOURCES message,
see DP v2.1 2.14.9.4.
Based on the above reprobe the MST topology after the link is retrained
with new link parameters to make sure that the MST link BW tracked in
the MST topology state (via each topology port's full_pbn value) is
up-to-date.
The next patch will make sure that the MST link BW is also kept
up-to-date if the link is disabled.
Imre Deak [Mon, 22 Jul 2024 16:55:00 +0000 (19:55 +0300)]
drm/i915/dp_mst: Queue modeset-retry after a failed payload BW allocation
If the MST payload allocation failed, enabling the output also failed
most probably, so send a uevent accordinly requesting the user to retry
the modeset. While at it remove the driver specific debug message, there
is already one printed by drm_dp_add_payload_part1().
Imre Deak [Mon, 22 Jul 2024 16:54:59 +0000 (19:54 +0300)]
drm/i915/dp_mst: Configure MST after the link parameters are reset
The MST topology probing depends on the maximum link parameters -
programmed to DPCD if required by a follow-up patch - so make sure these
parameters are up-to-date before configuring and probing the MST
topology.
Imre Deak [Mon, 29 Jul 2024 14:44:58 +0000 (17:44 +0300)]
drm/i915/dp_mst: Reduce the link parameters in BW order after LT failures
On MST links - at least for some MST branch devices - the list of modes
returned to users on an enabled link depends on the current link
rate/lane count parameters (besides the DPRX link capabilities, any MST
branch BW limit and the maximum link parameters reduced after LT
failures). In particular the MST branch BW limit may depend on the link
rate/lane count parameters programmed to DPCD. After an LT failure and
limiting the maximum link parameters accordingly, users should see a
mode list reflecting these new limits. However with the current fallback
order this isn't ensured, as the new limit could allow for modes
requiring a higher link BW, but these modes will be filtered out due to
the enabled link's lower link BW.
Ensure that the mode list changes in a consistent way after a link
training failure and reducing the link parameters by changing the
fallback order on MST links to happen in BW order.
v2:
- s/INTEL_DP_MAX_SUPPORTED_LANE_COUNTS/INTEL_DP_MAX_SUPPORTED_LANE_CONFIGS
and s/num_common_lane_counts/num_common_lane_configs to make the
difference wrt. max lane counts clearer. (Suraj)
- Add a TODO comment to make the SST fallback logic work the same way as
MST. (Arun)
- Use sort_r()'s default swap function instead of a custom one.
Imre Deak [Mon, 22 Jul 2024 16:54:55 +0000 (19:54 +0300)]
drm/i915/dp: Send only a single modeset-retry uevent for a commit
There are multiple failure cases a modeset-retry uevent can be sent for
a link (TBT tunnel BW allocation failure, unrecoverable link training
failure), a follow-up patch adding the handling for a new case where the
DP MST payload allocation fails. The uevent is the same in all cases,
sent to all the connectors on the link, so in case of multiple failures
there is no point in sending a separate uevent for each failure; prevent
this, sending only a single modeset-retry uevent for a commit.
Imre Deak [Mon, 22 Jul 2024 16:54:54 +0000 (19:54 +0300)]
drm/i915/dp: Initialize the link parameters during HW readout
Initialize the DP link parameters during HW readout. These need to be
up-to-date at least for the MST topology probing, which depends on the
link rate and lane count programmed in DPCD. A follow-up patch will
program the DPCD values to reflect the maximum link parameters before
the first MST topology probing, but should do so only if the link is
disabled (link_trained==false).
Imre Deak [Mon, 22 Jul 2024 16:54:53 +0000 (19:54 +0300)]
drm/i915/ddi: For an active output call the DP encoder sync_state() only for DP
If the DDI encoder output is enabled in HDMI mode there is no point in
calling intel_dp_sync_state(), as in that case the DPCD initialization
will fail - as expected - with AUX timeouts. Prevent calling the hook in
this case.
Imre Deak [Mon, 22 Jul 2024 16:54:52 +0000 (19:54 +0300)]
drm/dp_mst: Simplify the condition when to enumerate path resources
In the
if (old_ddps != port->ddps || !created)
if (port->ddps && !port->input)
ret = drm_dp_send_enum_path_resources();
sequence the first if's condition is true if the port exists already
(!created) or the port was created anew (hence old_ddps==0) and it was
in the plugged state (port->ddps==1). The second if's condition is true
for output ports in the plugged state. So the function is called for an
output port in the plugged state, regardless if it already existed or
not and regardless of the old plugged state. In all other cases
port->full_pbn can be zeroed as the port is either an input for which
full_pbn is never set, or an output in the unplugged state for which
full_pbn was already zeroed previously or the port was just created
(with port->full_pbn==0).
Simplify the condition, making it clear that the path resources are
always enumerated for an output port in the plugged state.
drm/i915: Fix possible int overflow in skl_ddi_calculate_wrpll()
On the off chance that clock value ends up being too high (by means
of skl_ddi_calculate_wrpll() having been called with big enough
value of crtc_state->port_clock * 1000), one possible consequence
may be that the result will not be able to fit into signed int.
Fix this issue by moving conversion of clock parameter from kHz to Hz
into the body of skl_ddi_calculate_wrpll(), as well as casting the
same parameter to u64 type while calculating the value for AFE clock.
This both mitigates the overflow problem and avoids possible erroneous
integer promotion mishaps.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
drm/i915/display/dp: Compute AS SDP when vrr is also enabled
AS SDP should be computed when VRR timing generator is also enabled.
Correct the compute condition to compute params of Adaptive sync SDP
when VRR timing genrator is enabled along with sink support indication.
Lucas De Marchi [Wed, 24 Jul 2024 21:53:09 +0000 (14:53 -0700)]
drm/xe: Fix opregion leak
Being part o the display, ideally the setup and cleanup would be done by
display itself. However this is a bigger refactor that needs to be done
on both i915 and xe. For now, just fix the leak:
Merge tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix RPM package build error caused by an incorrect locale setup
- Mark modules.weakdep as ghost in RPM package
- Fix the odd combination of -S and -c in stack protector scripts,
which is an error with the latest Clang
* tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Fix '-S -c' in x86 stack protector scripts
kbuild: rpm-pkg: ghost modules.weakdep file
kbuild: rpm-pkg: Fix C locale setup
minmax: simplify and clarify min_t()/max_t() implementation
This simplifies the min_t() and max_t() macros by no longer making them
work in the context of a C constant expression.
That means that you can no longer use them for static initializers or
for array sizes in type definitions, but there were only a couple of
such uses, and all of them were converted (famous last words) to use
MIN_T/MAX_T instead.
Commit 3a7e02c040b1 ("minmax: avoid overly complicated constant
expressions in VM code") added the simpler MIN_T/MAX_T macros in order
to avoid some excessive expansion from the rather complicated regular
min/max macros.
The complexity of those macros stems from two issues:
(a) trying to use them in situations that require a C constant
expression (in static initializers and for array sizes)
(b) the type sanity checking
and MIN_T/MAX_T avoids both of these issues.
Now, in the whole (long) discussion about all this, it was pointed out
that the whole type sanity checking is entirely unnecessary for
min_t/max_t which get a fixed type that the comparison is done in.
But that still leaves min_t/max_t unnecessarily complicated due to
worries about the C constant expression case.
However, it turns out that there really aren't very many cases that use
min_t/max_t for this, and we can just force-convert those.
This does exactly that.
Which in turn will then allow for much simpler implementations of
min_t()/max_t(). All the usual "macros in all upper case will evaluate
the arguments multiple times" rules apply.
We should do all the same things for the regular min/max() vs MIN/MAX()
cases, but that has the added complexity of various drivers defining
their own local versions of MIN/MAX, so that needs another level of
fixes first.
kbuild: Fix '-S -c' in x86 stack protector scripts
After a recent change in clang to stop consuming all instances of '-S'
and '-c' [1], the stack protector scripts break due to the kernel's use
of -Werror=unused-command-line-argument to catch cases where flags are
not being properly consumed by the compiler driver:
$ echo | clang -o - -x c - -S -c -Werror=unused-command-line-argument
clang: error: argument unused during compilation: '-c' [-Werror,-Wunused-command-line-argument]
This results in CONFIG_STACKPROTECTOR getting disabled because
CONFIG_CC_HAS_SANE_STACKPROTECTOR is no longer set.
'-c' and '-S' both instruct the compiler to stop at different stages of
the pipeline ('-S' after compiling, '-c' after assembling), so having
them present together in the same command makes little sense. In this
case, the test wants to stop before assembling because it is looking at
the textual assembly output of the compiler for either '%fs' or '%gs',
so remove '-c' from the list of arguments to resolve the error.
All versions of GCC continue to work after this change, along with
versions of clang that do or do not contain the change mentioned above.
Merge tag 'v6.11-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Enable turbostat extensions to add both perf and PMT (Intel
Platform Monitoring Technology) counters via the cmdline
- Demonstrate PMT access with built-in support for Meteor Lake's
Die C6 counter
* tag 'v6.11-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2024.07.26
tools/power turbostat: Include umask=%x in perf counter's config
tools/power turbostat: Document PMT in turbostat.8
tools/power turbostat: Add MTL's PMT DC6 builtin counter
tools/power turbostat: Add early support for PMT counters
tools/power turbostat: Add selftests for added perf counters
tools/power turbostat: Add selftests for SMI, APERF and MPERF counters
tools/power turbostat: Move verbose counter messages to level 2
tools/power turbostat: Move debug prints from stdout to stderr
tools/power turbostat: Fix typo in turbostat.8
tools/power turbostat: Add perf added counter example to turbostat.8
tools/power turbostat: Fix formatting in turbostat.8
tools/power turbostat: Extend --add option with perf counters
tools/power turbostat: Group SMI counter with APERF and MPERF
tools/power turbostat: Add ZERO_ARRAY for zero initializing builtin array
tools/power turbostat: Replace enum rapl_source and cstate_source with counter_source
tools/power turbostat: Remove anonymous union from rapl_counter_info_t
tools/power/turbostat: Switch to new Intel CPU model defines
Merge tag 'cxl-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dave Jiang:
"Core:
- A CXL maturity map has been added to the documentation to detail
the current state of CXL enabling.
It provides the status of the current state of various CXL features
to inform current and future contributors of where things are and
which areas need contribution.
- A notifier handler has been added in order for a newly created CXL
memory region to trigger the abstract distance metrics calculation.
This should bring parity for CXL memory to the same level vs
hotplugged DRAM for NUMA abstract distance calculation. The
abstract distance reflects relative performance used for memory
tiering handling.
- An addition for XOR math has been added to address the CXL DPA to
SPA translation.
CXL address translation did not support address interleave math
with XOR prior to this change.
Fixes:
- Fix to address race condition in the CXL memory hotplug notifier
- Add missing MODULE_DESCRIPTION() for CXL modules
- Fix incorrect vendor debug UUID define
Misc:
- A warning has been added to inform users of an unsupported
configuration when mixing CXL VH and RCH/RCD hierarchies
- The ENXIO error code has been replaced with EBUSY for inject poison
limit reached via debugfs and cxl-test support
- Moving the PCI config read in cxl_dvsec_rr_decode() to avoid
unnecessary PCI config reads
- A refactor to a common struct for DRAM and general media CXL
events"
* tag 'cxl-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/core/pci: Move reading of control register to immediately before usage
cxl: Remove defunct code calculating host bridge target positions
cxl/region: Verify target positions using the ordered target list
cxl: Restore XOR'd position bits during address translation
cxl/core: Fold cxl_trace_hpa() into cxl_dpa_to_hpa()
cxl/test: Replace ENXIO with EBUSY for inject poison limit reached
cxl/memdev: Replace ENXIO with EBUSY for inject poison limit reached
cxl/acpi: Warn on mixed CXL VH and RCH/RCD Hierarchy
cxl/core: Fix incorrect vendor debug UUID define
Documentation: CXL Maturity Map
cxl/region: Simplify cxl_region_nid()
cxl/region: Support to calculate memory tier abstract distance
cxl/region: Fix a race condition in memory hotplug notifier
cxl: add missing MODULE_DESCRIPTION() macros
cxl/events: Use a common struct for DRAM and General Media events
Merge tag 'unicode-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode
Pull unicode update from Gabriel Krisman Bertazi:
"Two small fixes to silence the compiler and static analyzers tools
from Ben Dooks and Jeff Johnson"
* tag 'unicode-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode:
unicode: add MODULE_DESCRIPTION() macros
unicode: make utf8 test count static
In the same way as for other similar files, mark as ghost the new file
generated by depmod for configured weak dependencies for modules,
modules.weakdep, so that although it is not included in the package,
claim the ownership on it.
Merge tag '6.11-rc-smb-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
- fix for potential null pointer use in init cifs
- additional dynamic trace points to improve debugging of some common
scenarios
- two SMB1 fixes (one addressing reconnect with POSIX extensions, one a
mount parsing error)
* tag '6.11-rc-smb-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb3: add dynamic trace point for session setup key expired failures
smb3: add four dynamic tracepoints for copy_file_range and reflink
smb3: add dynamic tracepoint for reflink errors
cifs: mount with "unix" mount option for SMB1 incorrectly handled
cifs: fix reconnect with SMB1 UNIX Extensions
cifs: fix potential null pointer use in destroy_workqueue in init_cifs error path
Merge tag 'block-6.11-20240726' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Fix request without payloads cleanup (Leon)
- Use new protection information format (Francis)
- Improved debug message for lost pci link (Bart)
- Another apst quirk (Wang)
- Use appropriate sysfs api for printing chars (Markus)
- ublk async device deletion fix (Ming)
- drbd kerneldoc fixups (Simon)
- Fix deadlock between sd removal and release (Yang)
* tag 'block-6.11-20240726' of git://git.kernel.dk/linux:
nvme-pci: add missing condition check for existence of mapped data
ublk: fix UBLK_CMD_DEL_DEV_ASYNC handling
block: fix deadlock between sd_remove & sd_release
drbd: Add peer_device to Kernel doc
nvme-core: choose PIF from QPIF if QPIFS supports and PIF is QTYPE
nvme-pci: Fix the instructions for disabling power management
nvme: remove redundant bdev local variable
nvme-fabrics: Use seq_putc() in __nvmf_concat_opt_tokens()
nvme/pci: Add APST quirk for Lenovo N60z laptop
Merge tag 'vfs-6.11-rc1.fixes.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"This contains two fixes for this merge window:
VFS:
- I noticed that it is possible for a privileged user to mount most
filesystems with a non-initial user namespace in sb->s_user_ns.
When fsopen() is called in a non-init namespace the caller's
namespace is recorded in fs_context->user_ns. If the returned file
descriptor is then passed to a process privileged in init_user_ns,
that process can call fsconfig(fd_fs, FSCONFIG_CMD_CREATE*),
creating a new superblock with sb->s_user_ns set to the namespace
of the process which called fsopen().
This is problematic as only filesystems that raise FS_USERNS_MOUNT
are known to be able to support a non-initial s_user_ns. Others may
suffer security issues, on-disk corruption or outright crash the
kernel. Prevent that by restricting such delegation to filesystems
that allow FS_USERNS_MOUNT.
Note, that this delegation requires a privileged process to
actually create the superblock so either the privileged process is
cooperaing or someone must have tricked a privileged process into
operating on a fscontext file descriptor whose origin it doesn't
know (a stupid idea).
The bug dates back to about 5 years afaict.
Misc:
- Fix hostfs parsing when the mount request comes in via the legacy
mount api.
In the legacy mount api hostfs allows to specify the host directory
mount without any key.
Restore that behavior"
* tag 'vfs-6.11-rc1.fixes.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
hostfs: fix the host directory parse when mounting.
fs: don't allow non-init s_user_ns for filesystems without FS_USERNS_MOUNT
Merge tag 'rust-6.11' of https://github.com/Rust-for-Linux/linux
Pull Rust updates from Miguel Ojeda:
"The highlight is the establishment of a minimum version for the Rust
toolchain, including 'rustc' (and bundled tools) and 'bindgen'.
The initial minimum will be the pinned version we currently have, i.e.
we are just widening the allowed versions. That covers three stable
Rust releases: 1.78.0, 1.79.0, 1.80.0 (getting released tomorrow),
plus beta, plus nightly.
This should already be enough for kernel developers in distributions
that provide recent Rust compiler versions routinely, such as Arch
Linux, Debian Unstable (outside the freeze period), Fedora Linux,
Gentoo Linux (especially the testing channel), Nix (unstable) and
openSUSE Slowroll and Tumbleweed.
In addition, the kernel is now being built-tested by Rust's pre-merge
CI. That is, every change that is attempting to land into the Rust
compiler is tested against the kernel, and it is merged only if it
passes. Similarly, the bindgen tool has agreed to build the kernel in
their CI too.
Thus, with the pre-merge CI in place, both projects hope to avoid
unintentional changes to Rust that break the kernel. This means that,
in general, apart from intentional changes on their side (that we will
need to workaround conditionally on our side), the upcoming Rust
compiler versions should generally work.
In addition, the Rust project has proposed getting the kernel into
stable Rust (at least solving the main blockers) as one of its three
flagship goals for 2024H2 [1].
I would like to thank Niko, Sid, Emilio et al. for their help
promoting the collaboration between Rust and the kernel.
Toolchain and infrastructure:
- Support several Rust toolchain versions.
- Support several bindgen versions.
- Remove 'cargo' requirement and simplify 'rusttest', thanks to
'alloc' having been dropped last cycle.
- Provide proper error reporting for the 'rust-analyzer' target.
'kernel' crate:
- Add 'uaccess' module with a safe userspace pointers abstraction.
- Add 'page' module with a 'struct page' abstraction.
- Support more complex generics in workqueue's 'impl_has_work!'
macro.
'macros' crate:
- Add 'firmware' field support to the 'module!' macro.
- Improve 'module!' macro documentation.
Documentation:
- Provide instructions on what packages should be installed to build
the kernel in some popular Linux distributions.
- Introduce the new kernel.org LLVM+Rust toolchains.
- Explain '#[no_std]'.
And a few other small bits"
Link: https://rust-lang.github.io/rust-project-goals/2024h2/index.html#flagship-goals
* tag 'rust-6.11' of https://github.com/Rust-for-Linux/linux: (26 commits)
docs: rust: quick-start: add section on Linux distributions
rust: warn about `bindgen` versions 0.66.0 and 0.66.1
rust: start supporting several `bindgen` versions
rust: work around `bindgen` 0.69.0 issue
rust: avoid assuming a particular `bindgen` build
rust: start supporting several compiler versions
rust: simplify Clippy warning flags set
rust: relax most deny-level lints to warnings
rust: allow `dead_code` for never constructed bindings
rust: init: simplify from `map_err` to `inspect_err`
rust: macros: indent list item in `paste!`'s docs
rust: add abstraction for `struct page`
rust: uaccess: add typed accessors for userspace pointers
uaccess: always export _copy_[from|to]_user with CONFIG_RUST
rust: uaccess: add userspace pointers
kbuild: rust-analyzer: improve comment documentation
kbuild: rust-analyzer: better error handling
docs: rust: no_std is used
rust: alloc: add __GFP_HIGHMEM flag
rust: alloc: fix typo in docs for GFP_NOWAIT
...
Merge tag 'apparmor-pr-2024-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull apparmor updates from John Johansen:
"Cleanups
- optimization: try to avoid refing the label in apparmor_file_open
- remove useless static inline function is_deleted
- use kvfree_sensitive to free data->data
- fix typo in kernel doc
Bug fixes:
- unpack transition table if dfa is not present
- test: add MODULE_DESCRIPTION()
- take nosymfollow flag into account
- fix possible NULL pointer dereference
- fix null pointer deref when receiving skb during sock creation"
* tag 'apparmor-pr-2024-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: unpack transition table if dfa is not present
apparmor: try to avoid refing the label in apparmor_file_open
apparmor: test: add MODULE_DESCRIPTION()
apparmor: take nosymfollow flag into account
apparmor: fix possible NULL pointer dereference
apparmor: fix typo in kernel doc
apparmor: remove useless static inline function is_deleted
apparmor: use kvfree_sensitive to free data->data
apparmor: Fix null pointer deref when receiving skb during sock creation
Merge tag 'landlock-6.11-rc1-houdini-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fix from Mickaël Salaün:
"Jann Horn reported a sandbox bypass for Landlock. This includes the
fix and new tests. This should be backported"
* tag 'landlock-6.11-rc1-houdini-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Add cred_transfer test
landlock: Don't lose track of restrictions on cred_transfer
Merge tag 'devicetree-fixes-for-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
"Most of this is a treewide change to of_property_for_each_u32() which
was small enough to do in one go before rc1 and avoids the need to
create of_property_for_each_u32_some_new_name().
- Treewide conversion of of_property_for_each_u32() to drop internal
arguments making struct property opaque
- Add binding for Amlogic A4 SoC watchdog
- Fix constraints for AD7192 'single-channel' property"
* tag 'devicetree-fixes-for-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: iio: adc: ad7192: Fix 'single-channel' constraints
of: remove internal arguments from of_property_for_each_u32()
dt-bindings: watchdog: add support for Amlogic A4 SoCs
Merge tag 'iommu-fixes-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Will Deacon:
"We're still resolving a regression with the handling of unexpected
page faults on SMMUv3, but we're not quite there with a fix yet.
- Fix NULL dereference when freeing domain in Unisoc SPRD driver
- Separate assignment statements with semicolons in AMD page-table
code
- Fix Tegra erratum workaround when the CPU is using 16KiB pages"
* tag 'iommu-fixes-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu: arm-smmu: Fix Tegra workaround for PAGE_SIZE mappings
iommu/amd: Convert comma to semicolon
iommu: sprd: Avoid NULL deref in sprd_iommu_hw_en
Merge tag 'firewire-fixes-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fixes from Takashi Sakamoto:
"The recent integration of compiler collections introduced the
technology to check flexible array length at runtime by providing
proper annotations. In v6.10 kernel, a patch was merged into firewire
subsystem to utilize it, however the annotation was inadequate.
There is also the related change for the flexible array in sound
subsystem, but it causes a regression where the data in the payload of
isochronous packet is incorrect for some devices. These bugs are now
fixed"
* tag 'firewire-fixes-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
ALSA: firewire-lib: fix wrong value as length of header for CIP_NO_HEADER case
Revert "firewire: Annotate struct fw_iso_packet with __counted_by()"
Merge tag 'spi-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"The bulk of this is a series of fixes for the microchip-core driver
mostly originating from one of their customers, I also applied an
additional patch adding support for controlling the word size which
came along with it since it's still the merge window and clearly had a
bunch of fairly thorough testing.
We also have a fix for the compatible used to bind spidev to the
BH2228FV"
* tag 'spi-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spidev: add correct compatible for Rohm BH2228FV
dt-bindings: trivial-devices: fix Rohm BH2228FV compatible string
spi: microchip-core: add support for word sizes of 1 to 32 bits
spi: microchip-core: ensure TX and RX FIFOs are empty at start of a transfer
spi: microchip-core: fix init function not setting the master and motorola modes
spi: microchip-core: only disable SPI controller when register value change requires it
spi: microchip-core: defer asserting chip select until just before write to TX FIFO
spi: microchip-core: fix the issues in the isr
Merge tag 'regulator-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"These two commits clean up the excessively loose dependencies for the
RZG2L USB VBCTRL regulator driver, ensuring it shouldn't prompt for
people who can't use it"
* tag 'regulator-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Further restrict RZG2L USB VBCTRL regulator dependencies
regulator: renesas-usb-vbus-regulator: Update the default
Merge tag 'regmap-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"Arnd sent a workaround for a false positive warning which was showing
up with GCC 14.1"
* tag 'regmap-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: maple: work around gcc-14.1 false-positive warning
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A few clk driver fixes for the merge window to fix the build and boot
on some SoCs.
- Initialize struct clk_init_data in the TI da8xx-cfgchip driver so
that stack contents aren't used for things like clk flags leading
to unexpected behavior
- Don't leak stack contents in a debug print in the new Sophgo clk
driver
- Disable the new T-Head clk driver on 32-bit targets to fix the
build due to a division
- Fix Samsung Exynos4 fin_pll wreckage from the clkdev rework done
last cycle by using a struct clk_hw directly instead of a struct
clk consumer"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: samsung: fix getting Exynos4 fin_pll rate from external clocks
clk: T-Head: Disable on 32-bit Targets
clk: sophgo: clk-sg2042-pll: Fix uninitialized variable in debug output
clk: davinci: da8xx-cfgchip: Initialize clk_init_data before use
Merge tag 'i3c/for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"This cycle, there are new features for the Designware controller and
fixes for the other IPs:
- dw: optional apb clock and power management support, IBI handling
fixes
- mipi-i3c-hci: IBI handling fixes
- svc: a few fixes"
* tag 'i3c/for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
dt-bindings: i3c: add header for generic I3C flags
i3c: master: svc: Fix error code in svc_i3c_master_do_daa_locked()
i3c: master: Enhance i3c_bus_type visibility for device searching & event monitoring
i3c: dw: Add power management support
i3c: dw: Add some functions for reusability
i3c: dw: Save timing registers and other values
i3c: master: svc: Improve DAA STOP handle code logic
i3c: dw: Add optional apb clock
i3c: dw: Use new *_enabled clk API
dt-bindings: i3c: dw: Add apb clock binding
i3c: master: svc: Convert comma to semicolon
i3c: mipi-i3c-hci: Round IBI data chunk size to HW supported value
i3c: mipi-i3c-hci: Error out instead on BUG_ON() in IBI DMA setup
i3c: mipi-i3c-hci: Set IBI Status and Data Ring base addresses
i3c: mipi-i3c-hci: Switch to lower_32_bits()/upper_32_bits() helpers
i3c: dw: Remove ibi_capable property
i3c: dw: Fix IBI intr programming
i3c: dw: Fix clearing queue thld
i3c: mipi-i3c-hci: Fix number of DAT/DCT entries for HCI versions < 1.1
i3c: master: svc: resend target address when get NACK
Merge tag 'thermal-6.11-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Prevent the thermal core from flooding the kernel log with useless
messages if thermal zone temperature can never be determined (or its
sensor has failed permanently) and make it finally give up and disable
defective thermal zones (Rafael Wysocki)"
* tag 'thermal-6.11-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Back off when polling thermal zones on errors
thermal: trip: Split thermal_zone_device_set_mode()
Merge tag 'mm-hotfixes-stable-2024-07-26-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"11 hotfixes, 7 of which are cc:stable. 7 are MM, 4 are other"
* tag 'mm-hotfixes-stable-2024-07-26-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
nilfs2: handle inconsistent state in nilfs_btnode_create_block()
selftests/mm: skip test for non-LPA2 and non-LVA systems
mm/page_alloc: fix pcp->count race between drain_pages_zone() vs __rmqueue_pcplist()
mm: memcg: add cacheline padding after lruvec in mem_cgroup_per_node
alloc_tag: outline and export free_reserved_page()
decompress_bunzip2: fix rare decompression failure
mm/huge_memory: avoid PMD-size page cache if needed
mm: huge_memory: use !CONFIG_64BIT to relax huge page alignment on 32 bit machines
mm: fix old/young bit handling in the faulting path
dt-bindings: arm: update James Clark's email address
MAINTAINERS: mailmap: update James Clark's email address
Merge tag 'timers-urgent-2024-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer migration updates from Thomas Gleixner:
"Fixes and minor updates for the timer migration code:
- Stop testing the group->parent pointer as it is not guaranteed to
be stable over a chain of operations by design.
This includes a warning which would be nice to have but it produces
false positives due to the racy nature of the check.
- Plug a race between CPUs going in and out of idle and a CPU hotplug
operation. The latter can create and connect a new hierarchy level
which is missed in the concurrent updates of CPUs which go into
idle. As a result the events of such a CPU might not be processed
and timers go stale.
Cure it by splitting the hotplug operation into a prepare and
online callback. The prepare callback is guaranteed to run on an
online and therefore active CPU. This CPU updates the hierarchy and
being online ensures that there is always at least one migrator
active which handles the modified hierarchy correctly when going
idle. The online callback which runs on the incoming CPU then just
marks the CPU active and brings it into operation.
- Improve tracing and polish the code further so it is more obvious
what's going on"
* tag 'timers-urgent-2024-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers/migration: Fix grammar in comment
timers/migration: Spare write when nothing changed
timers/migration: Rename childmask by groupmask to make naming more obvious
timers/migration: Read childmask and parent pointer in a single place
timers/migration: Use a single struct for hierarchy walk data
timers/migration: Improve tracing
timers/migration: Move hierarchy setup into cpuhotplug prepare callback
timers/migration: Do not rely always on group->parent
Merge tag 'riscv-for-linus-6.11-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Support for NUMA (via SRAT and SLIT), console output (via SPCR), and
cache info (via PPTT) on ACPI-based systems.
- The trap entry/exit code no longer breaks the return address stack
predictor on many systems, which results in an improvement to trap
latency.
- Support for HAVE_ARCH_STACKLEAK.
- The sv39 linear map has been extended to support 128GiB mappings.
- The frequency of the mtime CSR is now visible via hwprobe.
* tag 'riscv-for-linus-6.11-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (21 commits)
RISC-V: Provide the frequency of time CSR via hwprobe
riscv: Extend sv39 linear mapping max size to 128G
riscv: enable HAVE_ARCH_STACKLEAK
riscv: signal: Remove unlikely() from WARN_ON() condition
riscv: Improve exception and system call latency
RISC-V: Select ACPI PPTT drivers
riscv: cacheinfo: initialize cacheinfo's level and type from ACPI PPTT
riscv: cacheinfo: remove the useless input parameter (node) of ci_leaf_init()
RISC-V: ACPI: Enable SPCR table for console output on RISC-V
riscv: boot: remove duplicated targets line
trace: riscv: Remove deprecated kprobe on ftrace support
riscv: cpufeature: Extract common elements from extension checking
riscv: Introduce vendor variants of extension helpers
riscv: Add vendor extensions to /proc/cpuinfo
riscv: Extend cpufeature.c to detect vendor extensions
RISC-V: run savedefconfig for defconfig
RISC-V: hwprobe: sort EXT_KEY()s in hwprobe_isa_ext0() alphabetically
ACPI: NUMA: replace pr_info with pr_debug in arch_acpi_numa_init
ACPI: NUMA: change the ACPI_NUMA to a hidden option
ACPI: NUMA: Add handler for SRAT RINTC affinity structure
...
Merge tag 'for-linus-6.11-rc1a-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Two fixes for issues introduced in this merge window:
- fix enhanced debugging in the Xen multicall handling
- two patches fixing a boot failure when running as dom0 in PVH mode"
* tag 'for-linus-6.11-rc1a-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: fix memblock_reserve() usage on PVH
x86/xen: move xen_reserve_extra_memory()
xen: fix multicall debug data referencing
Hongbo Li [Thu, 25 Jul 2024 06:51:30 +0000 (14:51 +0800)]
hostfs: fix the host directory parse when mounting.
hostfs not keep the host directory when mounting. When the host
directory is none (default), fc->source is used as the host root
directory, and this is wrong. Here we use `parse_monolithic` to
handle the old mount path for parsing the root directory. For new
mount path, The `parse_param` is used for the host directory parse.
fs: don't allow non-init s_user_ns for filesystems without FS_USERNS_MOUNT
Christian noticed that it is possible for a privileged user to mount
most filesystems with a non-initial user namespace in sb->s_user_ns.
When fsopen() is called in a non-init namespace the caller's namespace
is recorded in fs_context->user_ns. If the returned file descriptor is
then passed to a process priviliged in init_user_ns, that process can
call fsconfig(fd_fs, FSCONFIG_CMD_CREATE), creating a new superblock
with sb->s_user_ns set to the namespace of the process which called
fsopen().
This is problematic. We cannot assume that any filesystem which does not
set FS_USERNS_MOUNT has been written with a non-initial s_user_ns in
mind, increasing the risk for bugs and security issues.
Prevent this by returning EPERM from sget_fc() when FS_USERNS_MOUNT is
not set for the filesystem and a non-initial user namespace will be
used. sget() does not need to be updated as it always uses the user
namespace of the current context, or the initial user namespace if
SB_SUBMOUNT is set.
ALSA: firewire-lib: fix wrong value as length of header for CIP_NO_HEADER case
In a commit 1d717123bb1a ("ALSA: firewire-lib: Avoid
-Wflex-array-member-not-at-end warning"), DEFINE_FLEX() macro was used to
handle variable length of array for header field in struct fw_iso_packet
structure. The usage of macro has a side effect that the designated
initializer assigns the count of array to the given field. Therefore
CIP_HEADER_QUADLETS (=2) is assigned to struct fw_iso_packet.header,
while the original designated initializer assigns zero to all fields.
With CIP_NO_HEADER flag, the change causes invalid length of header in
isochronous packet for 1394 OHCI IT context. This bug affects all of
devices supported by ALSA fireface driver; RME Fireface 400, 800, UCX, UFX,
and 802.
This commit fixes the bug by replacing it with the alternative version of
macro which corresponds no initializer.
The header_length field is byte unit, thus it can not express the number of
elements in header field. It seems that the argument for counted_by
attribute can have no arithmetic expression, therefore this commit just
reverts the issued commit.
minmax: avoid overly complicated constant expressions in VM code
The minmax infrastructure is overkill for simple constants, and can
cause huge expansions because those simple constants are then used by
other things.
For example, 'pageblock_order' is a core VM constant, but because it was
implemented using 'min_t()' and all the type-checking that involves, it
actually expanded to something like 2.5kB of preprocessor noise.
And when that simple constant was then used inside other expansions:
the end result was that one statement expanding to 253kB in size.
There are probably other cases of this, but this one case certainly
stood out.
I've added 'MIN_T()' and 'MAX_T()' macros for this kind of "core simple
constant with specific type" use. These macros skip the type checking,
and as such need to be very sparingly used only for obvious cases that
have active issues like this.
minmax: avoid overly complex min()/max() macro arguments in xen
We have some very fancy min/max macros that have tons of sanity checking
to warn about mixed signedness etc.
This is all things that a sane compiler should warn about, but there are
no sane compiler interfaces for this, and '-Wsign-compare' is broken [1]
and not useful.
So then we compensate (some would say over-compensate) by doing the
checks manually with some truly horrid macro games.
And no, we can't just use __builtin_types_compatible_p(), because the
whole question of "does it make sense to compare these two values" is a
lot more complicated than that.
For example, it makes a ton of sense to compare unsigned values with
simple constants like "5", even if that is indeed a signed type. So we
have these very strange macros to try to make sensible type checking
decisions on the arguments to 'min()' and 'max()'.
But that can cause enormous code expansion if the min()/max() macros are
used with complicated expressions, and particularly if you nest these
things so that you get the first big expansion then expanded again.
The xen setup.c file ended up ballooning to over 50MB of preprocessed
noise that takes 15s to compile (obviously depending on the build host),
largely due to one single line.
So let's split that one single line to just be simpler. I think it ends
up being more legible to humans too at the same time. Now that single
file compiles in under a second.
nilfs2: handle inconsistent state in nilfs_btnode_create_block()
Syzbot reported that a buffer state inconsistency was detected in
nilfs_btnode_create_block(), triggering a kernel bug.
It is not appropriate to treat this inconsistency as a bug; it can occur
if the argument block address (the buffer index of the newly created
block) is a virtual block number and has been reallocated due to
corruption of the bitmap used to manage its allocation state.
So, modify nilfs_btnode_create_block() and its callers to treat it as a
possible filesystem error, rather than triggering a kernel bug.
Dev Jain [Thu, 18 Jul 2024 05:25:04 +0000 (10:55 +0530)]
selftests/mm: skip test for non-LPA2 and non-LVA systems
Post my improvement of the test in e4a4ba415419 ("selftests/mm:
va_high_addr_switch: dynamically initialize testcases to enable LPA2
testing"):
The test begins to fail on 4k and 16k pages, on non-LPA2 systems. To
reduce noise in the CI systems, let us skip the test when higher address
space is not implemented.
Li Zhijian [Tue, 23 Jul 2024 06:44:28 +0000 (14:44 +0800)]
mm/page_alloc: fix pcp->count race between drain_pages_zone() vs __rmqueue_pcplist()
It's expected that no page should be left in pcp_list after calling
zone_pcp_disable() in offline_pages(). Previously, it's observed that
offline_pages() gets stuck [1] due to some pages remaining in pcp_list.
Cause:
There is a race condition between drain_pages_zone() and __rmqueue_pcplist()
involving the pcp->count variable. See below scenario:
CPU0 CPU1
---------------- ---------------
spin_lock(&pcp->lock);
__rmqueue_pcplist() {
zone_pcp_disable() {
/* list is empty */
if (list_empty(list)) {
/* add pages to pcp_list */
alloced = rmqueue_bulk()
mutex_lock(&pcp_batch_high_lock)
...
__drain_all_pages() {
drain_pages_zone() {
/* read pcp->count, it's 0 here */
count = READ_ONCE(pcp->count)
/* 0 means nothing to drain */
/* update pcp->count */
pcp->count += alloced << order;
...
...
spin_unlock(&pcp->lock);
In this case, after calling zone_pcp_disable() though, there are still some
pages in pcp_list. And these pages in pcp_list are neither movable nor
isolated, offline_pages() gets stuck as a result.
Solution:
Expand the scope of the pcp->lock to also protect pcp->count in
drain_pages_zone(), to ensure no pages are left in the pcp list after
zone_pcp_disable()
Roman Gushchin [Tue, 23 Jul 2024 17:12:44 +0000 (17:12 +0000)]
mm: memcg: add cacheline padding after lruvec in mem_cgroup_per_node
Oliver Sand reported a performance regression caused by commit 98c9daf5ae6b ("mm: memcg: guard memcg1-specific members of struct
mem_cgroup_per_node"), which puts some fields of the mem_cgroup_per_node
structure under the CONFIG_MEMCG_V1 config option. Apparently it causes a
false cache sharing between lruvec and lru_zone_size members of the
structure. Fix it by adding an explicit padding after the lruvec member.
Even though the padding is not required with CONFIG_MEMCG_V1 set, it seems
like the introduced memory overhead is not significant enough to warrant
another divergence in the mem_cgroup_per_node layout, so the padding is
added unconditionally.
alloc_tag: outline and export free_reserved_page()
Outline and export free_reserved_page() because modules use it and it in
turn uses page_ext_{get|put} which should not be exported. The same
result could be obtained by outlining {get|put}_page_tag_ref() but that
would have higher performance impact as these functions are used in more
performance critical paths.
The decompression code parses a huffman tree and counts the number of
symbols for a given bit length. In rare cases, there may be >= 256
symbols with a given bit length, causing the unsigned char to overflow.
This causes a decompression failure later when the code tries and fails to
find the bit length for a given symbol.
Since the maximum number of symbols is 258, use unsigned short instead.
mm/huge_memory: avoid PMD-size page cache if needed
xarray can't support arbitrary page cache size. the largest and supported
page cache size is defined as MAX_PAGECACHE_ORDER by commit 099d90642a71
("mm/filemap: make MAX_PAGECACHE_ORDER acceptable to xarray"). However,
it's possible to have 512MB page cache in the huge memory's collapsing
path on ARM64 system whose base page size is 64KB. 512MB page cache is
breaking the limitation and a warning is raised when the xarray entry is
split as shown in the following example.
[root@dhcp-10-26-1-207 ~]# cat /proc/1/smaps | grep KernelPageSize
KernelPageSize: 64 kB
[root@dhcp-10-26-1-207 ~]# cat /tmp/test.c
:
int main(int argc, char **argv)
{
const char *filename = TEST_XFS_FILENAME;
int fd = 0;
void *buf = (void *)-1, *p;
int pgsize = getpagesize();
int ret = 0;
if (pgsize != 0x10000) {
fprintf(stdout, "System with 64KB base page size is required!\n");
return -EPERM;
}
Fix it by correcting the supported page cache orders, different sets for
DAX and other files. With it corrected, 512MB page cache becomes
disallowed on all non-DAX files on ARM64 system where the base page size
is 64KB. After this patch is applied, the test program fails with error
-EINVAL returned from __thp_vma_allowable_orders() and the madvise()
system call to collapse the page caches.
Yang Shi [Fri, 12 Jul 2024 15:58:55 +0000 (08:58 -0700)]
mm: huge_memory: use !CONFIG_64BIT to relax huge page alignment on 32 bit machines
Yves-Alexis Perez reported commit 4ef9ad19e176 ("mm: huge_memory: don't
force huge page alignment on 32 bit") didn't work for x86_32 [1]. It is
because x86_32 uses CONFIG_X86_32 instead of CONFIG_32BIT.
mm: fix old/young bit handling in the faulting path
Commit 3bd786f76de2 ("mm: convert do_set_pte() to set_pte_range()")
replaced do_set_pte() with set_pte_range() and that introduced a
regression in the following faulting path of non-anonymous vmas which
caused the PTE for the faulting address to be marked as old instead of
young.
The polarity of prefault calculation is incorrect. This leads to prefault
being incorrectly set for the faulting address. The following check will
incorrectly mark the PTE old rather than young. On some architectures
this will cause a double fault to mark it young when the access is
retried.
if (prefault && arch_wants_old_prefaulted_pte())
entry = pte_mkold(entry);
On a subsequent fault on the same address, the faulting path will see a
non NULL vmf->pte and instead of reaching the do_pte_missing() path, PTE
will then be correctly marked young in handle_pte_fault() itself.
Due to this bug, performance degradation in the fault handling path will
be observed due to unnecessary double faulting.
The 'single-channel' property is an uint32, not an array, so 'items' is
an incorrect constraint. This didn't matter until dtschema recently
changed how properties are decoded. This results in this warning:
Documentation/devicetree/bindings/iio/adc/adi,ad7192.example.dtb: adc@0: \
channel@1:single-channel: 1 is not of type 'array'
tools/power turbostat: Include umask=%x in perf counter's config
Some counters, like cpu/cache-misses/, expose and require umask=%x
parameter alongside event=%x in the sysfs perf counter's event file.
This change make sure we parse and use it when opening user added
counters.
Provide a definition for metadata that allows reading DC6 residency
counter via PMT and exposes it as a builtin counter.
Note that this residency counter is updated and read via
entirely different mechanisms vs the MSR-based residency counters.
On MTL processors, there are times when Die%c6 will report above 100%.
This is still useful, but don't expect 3 digits of precision...
tools/power turbostat: Add early support for PMT counters
Allows users to read Intel PMT (Platform Monitoring Technology)
counters, providing interface similar to one used to add MSR and perf
counters. Because PMT is exposed as a raw MMIO range, without metadata,
user has to supply the necessary information to find and correctly
display the requested counter.
Merge tag 'auxdisplay-for-v6.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull auxdisplay updates from Geert Uytterhoeven:
- add support for configuring the boot message on line displays
- miscellaneous fixes and improvements
* tag 'auxdisplay-for-v6.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
auxdisplay: ht16k33: Drop reference after LED registration
auxdisplay: Use sizeof(*pointer) instead of sizeof(type)
auxdisplay: hd44780: add missing MODULE_DESCRIPTION() macro
auxdisplay: linedisp: add missing MODULE_DESCRIPTION() macro
auxdisplay: linedisp: Support configuring the boot message
auxdisplay: charlcd: Provide a forward declaration
Merge tag 'sound-fix-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fixes gathered since the previous pull.
We see a bit large LOCs at a HD-audio quirk, but that's only bulk COEF
data, hence it's safe to take. In addition to that, there were two
minor fixes for MIDI 2.0 handling for ALSA core, and the rest are all
rather random small and device-specific fixes"
* tag 'sound-fix-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: fsl-asoc-card: Dynamically allocate memory for snd_soc_dai_link_components
ASoC: amd: yc: Support mic on Lenovo Thinkpad E16 Gen 2
ALSA: hda/realtek: Implement sound init sequence for Samsung Galaxy Book3 Pro 360
ALSA: hda/realtek: cs35l41: Fixup remaining asus strix models
ASoC: SOF: ipc4-topology: Preserve the DMA Link ID for ChainDMA on unprepare
ASoC: SOF: ipc4-topology: Only handle dai_config with HW_PARAMS for ChainDMA
ALSA: ump: Force 1 Group for MIDI1 FBs
ALSA: ump: Don't update FB name for static blocks
ALSA: usb-audio: Add a quirk for Sonix HD USB Camera
ASoC: TAS2781: Fix tasdev_load_calibrated_data()
ASoC: tegra: select CONFIG_SND_SIMPLE_CARD_UTILS
ASoC: Intel: use soc_intel_is_byt_cr() only when IOSF_MBI is reachable
ALSA: usb-audio: Move HD Webcam quirk to the right place
ALSA: hda: tas2781: mark const variables as __maybe_unused
ALSA: usb-audio: Fix microphone sound on HD webcam.
ASoC: sof: amd: fix for firmware reload failure in Vangogh platform
ASoC: Intel: Fix RT5650 SSP lookup
ASOC: SOF: Intel: hda-loader: only wait for HDaudio IOC for IPC4 devices
ASoC: SOF: imx8m: Fix DSP control regmap retrieval
i915:
- Reset intel_dp->link_trained before retraining the link
- Don't switch the LTTPR mode on an active link
- Do not consider preemption during execlists_dequeue for gen8
- Allow NULL memory region
xe:
- xe_exec ioctl minor fix on sync entry cleanup upon error
- SRIOV: limit VF LMEM provisioning
- Wedge mode fixes
v3d:
- fix indirect dispatch on newer v3d revs
panel:
- fix panel backlight bindings"
* tag 'drm-next-2024-07-26' of https://gitlab.freedesktop.org/drm/kernel: (39 commits)
drm/amdgpu: reset vm state machine after gpu reset(vram lost)
drm/amdgpu: add missed harvest check for VCN IP v4/v5
drm/amdgpu: Fix eeprom max record count
drm/amdgpu: fix ras UE error injection failure issue
drm/amd/display: Remove ASSERT if significance is zero in math_ceil2
drm/amd/display: Check for NULL pointer
drm/amdgpu/vcn: Use offsets local to VCN/JPEG in VF
drm/amdgpu: Add empty HDP flush function to VCN v4.0.3
drm/amdgpu: Add empty HDP flush function to JPEG v4.0.3
drm/amd/amdgpu: Fix uninitialized variable warnings
drm/amdgpu: Fix atomics on GFX12
drm/amdgpu/sdma5.2: Update wptr registers as well as doorbell
drm/i915: Allow NULL memory region
drm/i915/gt: Do not consider preemption during execlists_dequeue for gen8
dt-bindings: display: panel: samsung,atna33xc20: Document ATNA45AF01
drm/xe: Don't suspend device upon wedge
drm/xe: Wedge the entire device
drm/xe/pf: Limit fair VF LMEM provisioning
drm/xe/exec: Fix minor bug related to xe_sync_entry_cleanup
drm/amd/display: fix corruption with high refresh rates on DCN 3.0
...
tools/power turbostat: Add selftests for added perf counters
Test adds several perf counters from msr, cstate_core and cstate_pkg
groups and checks if the columns for those counters show up.
The test skips the counters that are not present. It is not an error,
but the test may not be as exhaustive.
tools/power turbostat: Add selftests for SMI, APERF and MPERF counters
The test requests BICs that are dependent on SMI, APERF and MPERF
counters and checks if the columns show up in the output and the
turbostat doesn't crash. Read the counters in both --no-msr
and --no-perf mode.
The test skips counters that are not present or user does not have
permissions to read. It is not an error, but the test may not be as
exhaustive.
Merge tag 's390-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Fix KMSAN build breakage caused by the conflict between s390 and
mm-stable trees
- Add KMSAN page markers for ptdump
- Add runtime constant support
- Fix __pa/__va for modules under non-GPL licenses by exporting
necessary vm_layout struct with EXPORT_SYMBOL to prevent linkage
problems
- Fix an endless loop in the CF_DIAG event stop in the CPU Measurement
Counter Facility code when the counter set size is zero
- Remove the PROTECTED_VIRTUALIZATION_GUEST config option and enable
its functionality by default
- Support allocation of multiple MSI interrupts per device and improve
logging of architecture-specific limitations
- Add support for lowcore relocation as a debugging feature to catch
all null ptr dereferences in the kernel address space, improving
detection beyond the current implementation's limited write access
protection
- Clean up and rework CPU alternatives to allow for callbacks and early
patching for the lowcore relocation
* tag 's390-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (39 commits)
s390: Remove protvirt and kvm config guards for uv code
s390/boot: Add cmdline option to relocate lowcore
s390/kdump: Make kdump ready for lowcore relocation
s390/entry: Make system_call() ready for lowcore relocation
s390/entry: Make ret_from_fork() ready for lowcore relocation
s390/entry: Make __switch_to() ready for lowcore relocation
s390/entry: Make restart_int_handler() ready for lowcore relocation
s390/entry: Make mchk_int_handler() ready for lowcore relocation
s390/entry: Make int handlers ready for lowcore relocation
s390/entry: Make pgm_check_handler() ready for lowcore relocation
s390/entry: Add base register to CHECK_VMAP_STACK/CHECK_STACK macro
s390/entry: Add base register to SIEEXIT macro
s390/entry: Add base register to MBEAR macro
s390/entry: Make __sie64a() ready for lowcore relocation
s390/head64: Make startup code ready for lowcore relocation
s390: Add infrastructure to patch lowcore accesses
s390/atomic_ops: Disable flag outputs constraint for GCC versions below 14.2.0
s390/entry: Move SIE indicator flag to thread info
s390/nmi: Simplify ptregs setup
s390/alternatives: Remove alternative facility list
...
tools/power turbostat: Move verbose counter messages to level 2
Printing information about the source and value during initialization and
reading of the counter for each cpu, while useful when debugging,
results in too verbose output.
projects / linux.git / log