Tom St Denis [Mon, 31 Jul 2017 13:35:24 +0000 (09:35 -0400)]
drm/amd/amdgpu: Add tracepoint for DMA page mapping (v4)
This helps map DMA addresses back to physical addresses.
Signed-off-by: Tom St Denis <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
(v2): Added tracepoints for USERPTR, SG mappings, and
SWIOTBL mappings. Reformatted trace call perform
PCI decoding internal to the trace.
Christian König [Thu, 3 Aug 2017 15:44:01 +0000 (11:44 -0400)]
drm/amdgpu: only move VM BOs in the LRU during validation v2
This should save us a bunch of command submission overhead.
v2: move the LRU move to the right place to avoid the move for the root BO
and handle the shadow BOs as well. This turned out to be a bug fix because
the move needs to happen before the kmap.
Christian König [Thu, 20 Jul 2017 18:55:06 +0000 (20:55 +0200)]
drm/ttm: individualize BO reservation obj when they are freed
Use the BOs reservation object when it is put on the ddelete list. This way we
avoid delaying freeing up the BO because of new fences on the reservation object.
This is used by dma-buf and amdgpu's VM page tables.
Dave Airlie [Thu, 17 Aug 2017 19:41:32 +0000 (05:41 +1000)]
Merge tag 'omapdrm-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next
omapdrm changes for v4.14
* HDMI hot plug IRQ support (instead of polling)
* Big driver cleanup from Laurent (no functional changes)
* OMAP5 DSI support (only the pinmuxing was missing)
* tag 'omapdrm-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (60 commits)
drm/omap: Potential NULL deref in omap_crtc_duplicate_state()
drm/omap: remove no-op cleanup code
drm/omap: rename omapdrm device back
drm: omapdrm: Remove omapdrm platform data
ARM: OMAP2+: Don't register omapdss device for omapdrm
ARM: OMAP2+: Remove unused omapdrm platform device
drm: omapdrm: Remove the omapdss driver
drm: omapdrm: Register omapdrm platform device in omapdss driver
drm: omapdrm: hdmi: Don't allocate PHY features dynamically
drm: omapdrm: hdmi: Configure the PHY from the HDMI core version
drm: omapdrm: hdmi: Configure the PLL from the HDMI core version
drm: omapdrm: hdmi: Pass HDMI core version as integer to HDMI audio
drm: omapdrm: hdmi: Replace OMAP SoC model check with HDMI xmit version
drm: omapdrm: hdmi: Rename functions and structures to use hdmi_ prefix
drm/omap: add OMAP5 DSIPHY lane-enable support
drm/omap: use regmap_update_bit() when muxing DSI pads
drm: omapdrm: Remove dss_features.h
drm: omapdrm: Move supported outputs feature to dss driver
drm: omapdrm: Move DSS_FCK feature to dss driver
drm: omapdrm: Move PCD, LINEWIDTH and DOWNSCALE features to dispc driver
...
Dave Airlie [Thu, 17 Aug 2017 19:30:53 +0000 (05:30 +1000)]
Merge branch 'drm-next-4.14' of git://people.freedesktop.org/~agd5f/linux into drm-next
More features for 4.14. Nothing too major here. I have a few more additional
patches for large page support in vega10 among other things, but they require
some resevation object patches from drm-misc-next, so I'll send that request
once you've pulled the latest drm-misc-next. Highlights:
- Fixes for ACP audio on stoney
- SR-IOV fixes for vega10
- various powerplay fixes
- lots of code clean up
* 'drm-next-4.14' of git://people.freedesktop.org/~agd5f/linux: (62 commits)
drm/amdgpu/gfx7: fix function name
drm/amd/amdgpu: Disabling Power Gating for Stoney platform
drm/amd/amdgpu: Added a quirk for Stoney platform
drm/amdgpu: jt_size was wrongly counted twice
drm/amdgpu: fix missing endian-safe guard
drm/amdgpu: ignore digest_size when loading sdma fw for raven
drm/amdgpu: Uninitialized variable in amdgpu_ttm_backend_bind()
drm/amd/powerplay: fix coding style in hwmgr.c
drm/amd/powerplay: refine dmesg info under powerplay.
drm/amdgpu: don't finish the ring if not initialized
drm/radeon: Fix preferred typo
drm/amdgpu: Fix preferred typo
drm/radeon: Fix stolen typo
drm/amdgpu: Fix stolen typo
drm/amd/powerplay: fix coccinelle warnings in vega10_hwmgr.c
drm/amdgpu: set gfx_v9_0_ip_funcs as static
drm/radeon: switch to drm_*{get,put} helpers
drm/amdgpu: switch to drm_*{get,put} helpers
drm/amd/powerplay: add CZ profile support
drm/amd/powerplay: fix PSI not enabled by kmd
...
Dmitry Osipenko [Fri, 11 Aug 2017 17:54:56 +0000 (19:54 +0200)]
drm/tegra: Prevent BOs from being freed during job submission
Since DRM IOCTL's are lockless, there is a chance that BOs could be
released while a job submission is in progress. To avoid that, keep the
GEM reference until the job has been pinned, part of which will be to
take another reference.
Cihangir Akturk [Fri, 11 Aug 2017 12:33:07 +0000 (15:33 +0300)]
drm/tegra: switch to drm_*_get(), drm_*_put() helpers
Use drm_*_get() and drm_*_put() helpers instead of drm_*_reference()
and drm_*_unreference() helpers.
drm_*_reference() and drm_*_unreference() functions are just
compatibility alias for drm_*_get() and drm_*_put() and should not be
used by new code. So convert all users of compatibility functions to
use the new APIs.
Nicolas Chauvet [Tue, 11 Jul 2017 08:39:04 +0000 (10:39 +0200)]
drm/tegra: Set MODULE_FIRMWARE for the VIC
The defines are set anyway to prevent an empty string. The test for the
SoC is the same as for Nouveau for the Tegra GPU firmware (see
drivers/gpu/drm/nouveau/nouveau_platform.c)
v2:
- Place the defines above each chip's vic_config struct
- MODULE_FIRMWARE() at the end of the file
drivers/gpu/drm/tegra/dpaux.c:378:20: error: 'pinconf_generic_dt_node_to_map_group' undeclared here (not in a function); did you mean 'pinconf_generic_params'?
.dt_node_to_map = pinconf_generic_dt_node_to_map_group,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
pinconf_generic_params
drivers/gpu/drm/tegra/dpaux.c:379:17: error: 'pinconf_generic_dt_free_map' undeclared here (not in a function); did you mean 'pinconf_generic_params'?
Thierry Reding [Tue, 15 Aug 2017 13:46:22 +0000 (15:46 +0200)]
gpu: host1x: Support sub-devices recursively
The display architecture in Tegra186 changes slightly compared to
earlier Tegra generations, which requires that we recursively scan
host1x sub-devices from device tree.
gpu: host1x: fix error return code in host1x_probe()
platform_get_irq() returns an error code, but the host1x driver
ignores it and always returns -ENXIO. This is not correct and,
prevents -EPROBE_DEFER from being propagated properly.
Notice that platform_get_irq() no longer returns 0 on error:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af
Print and propagate the return value of platform_get_irq on failure.
This issue was detected with the help of Coccinelle.
Mikko Perttunen [Wed, 2 Aug 2017 09:55:05 +0000 (12:55 +0300)]
gpu: host1x: Fix bitshift/mask multipliers
Some parts of Host1x uses BIT_WORD/BIT_MASK/BITS_PER_LONG to calculate
register or field offsets. This worked fine on ARMv7, but now that
BITS_PER_LONG is 64 but our registers are still 32-bit things are
broken.
Fix by replacing..
- BIT_WORD with (x / 32)
- BIT_MASK with BIT(x % 32)
- BITS_PER_LONG with 32
Mikko Perttunen [Wed, 2 Aug 2017 09:55:04 +0000 (12:55 +0300)]
gpu: host1x: Don't fail on NULL bo physical address
Pinning a Host1x BO currently cannot fail and zero is a valid address
for a BO when IOMMU is enabled. To avoid false errors remove checks
for NULL BO physical addresses.
Jani Nikula [Thu, 17 Aug 2017 11:52:09 +0000 (14:52 +0300)]
drm/i915/opregion: let user specify override VBT via firmware load
Sometimes it would be most enlightening to debug systems by replacing
the VBT to be used. For example, in the referenced bug the BIOS provides
different VBT depending on the boot mode (UEFI vs. legacy). It would be
interesting to try the failing boot mode with the VBT from the working
boot, and see if that makes a difference.
Add a module parameter to load the VBT using the firmware loader, not
unlike the EDID firmware mechanism.
As a starting point for experimenting, one can pick up the BIOS provided
VBT from /sys/kernel/debug/dri/0/i915_opregion/i915_vbt.
v2: clarify firmware load return value check (Bob)
Dave Airlie [Wed, 16 Aug 2017 21:33:41 +0000 (07:33 +1000)]
Merge tag 'drm-misc-next-2017-08-16' of git://anongit.freedesktop.org/git/drm-misc into drm-next
UAPI Changes:
- vc4: Allow userspace to dictate rendering order in submit_cl ioctl (Eric)
Cross-subsystem Changes:
- vboxvideo: One of Cihangir's patches applies to vboxvideo which is maintained
in staging
Core Changes:
- atomic_legacy_backoff is officially killed (Daniel)
- Extract drm_device.h (Daniel)
- Unregister drm device on unplug (Daniel)
- Rename deprecated drm_*_(un)?reference functions to drm_*_{get|put} (Cihangir)
Driver Changes:
- vc4: Error/destroy path cleanups, log level demotion, edid leak (Eric)
- various: Make various drm_*_funcs structs const (Bhumika)
- tinydrm: add support for LEGO MINDSTORMS EV3 LCD (David)
- various: Second half of .dumb_{map_offset|destroy} defaults set (Noralf)
Cc: Daniel Vetter <[email protected]> Cc: Eric Anholt <[email protected]> Cc: Bhumika Goyal <[email protected]> Cc: Cihangir Akturk <[email protected]> Cc: David Lechner <[email protected]> Cc: Noralf Trønnes <[email protected]>
* tag 'drm-misc-next-2017-08-16' of git://anongit.freedesktop.org/git/drm-misc: (50 commits)
drm/gem-cma-helper: Remove drm_gem_cma_dumb_map_offset()
drm/virtio: Use the drm_driver.dumb_destroy default
drm/bochs: Use the drm_driver.dumb_destroy default
drm/mgag200: Use the drm_driver.dumb_destroy default
drm/exynos: Use .dumb_map_offset and .dumb_destroy defaults
drm/msm: Use the drm_driver.dumb_destroy default
drm/ast: Use the drm_driver.dumb_destroy default
drm/qxl: Use the drm_driver.dumb_destroy default
drm/udl: Use the drm_driver.dumb_destroy default
drm/cirrus: Use the drm_driver.dumb_destroy default
drm/tegra: Use .dumb_map_offset and .dumb_destroy defaults
drm/gma500: Use .dumb_map_offset and .dumb_destroy defaults
drm/mxsfb: Use .dumb_map_offset and .dumb_destroy defaults
drm/meson: Use .dumb_map_offset and .dumb_destroy defaults
drm/kirin: Use .dumb_map_offset and .dumb_destroy defaults
drm/vc4: Continue the switch to drm_*_put() helpers
drm/vc4: Fix leak of HDMI EDID
dma-buf: fix reservation_object_wait_timeout_rcu to wait correctly v2
dma-buf: add reservation_object_copy_fences (v2)
drm/tinydrm: add support for LEGO MINDSTORMS EV3 LCD
...
Noralf Trønnes [Sun, 13 Aug 2017 13:31:44 +0000 (15:31 +0200)]
drm: Add GEM backed framebuffer library
This library provides helpers for drivers that don't subclass
drm_framebuffer and are backed by drm_gem_object. The code is
taken from drm_fb_cma_helper.
Noralf Trønnes [Sun, 6 Aug 2017 15:41:02 +0000 (17:41 +0200)]
drm/exynos: Use .dumb_map_offset and .dumb_destroy defaults
This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.
Use drm_gem_dumb_map_offset() in exynos_drm_gem_map_ioctl() and
remove exynos_drm_gem_dumb_map_offset().
Paulo Zanoni [Fri, 11 Aug 2017 23:38:25 +0000 (16:38 -0700)]
drm/i915/gen10: implement gen 10 watermarks calculations
They're slightly different than the gen 9 calculations.
v2: Remove TODO comment. Code matches recent spec.
v3: Rebase on top of latest skl code using new fp16.16 and
fixing a logic issue. Auto rebase bot has apparently
made some bad decisions that changed the logic of the
code. (Noticed by Manesh, updated by Rodrigo).
Jani Nikula [Fri, 11 Aug 2017 11:39:07 +0000 (14:39 +0300)]
drm/i915/vbt: ignore extraneous child devices for a port
Ever since we've parsed VBT child devices, starting from 6acab15a7b0d
("drm/i915: use the HDMI DDI buffer translations from VBT"), we've
ignored the child device information if more than one child device
references the same port. The rationale for this seems lost in time.
Since commit 311a20949f04 ("drm/i915: don't init DP or HDMI when not
supported by DDI port") we started using this information more to skip
HDMI/DP init if the port wasn't there per VBT child devices. However, at
the same time it added port defaults without further explanation.
Thus, if the child device info was skipped due to multiple child devices
referencing the same port, the device info would be retrieved from the
somewhat arbitrary defaults.
Finally, when commit bb1d132935c2 ("drm/i915/vbt: split out defaults
that are set when there is no VBT") stopped initializing the defaults
whenever VBT is present, thus trusting the VBT more, we stopped
initializing ports which were referenced by more than one child device.
Apparently at least Asus UX305UA, UX305U, and UX306U laptops have VBT
child device blocks which cause this behaviour. Arguably they were
shipped with a broken VBT.
Relax the rules for multiple references to the same port, and use the
first child device info to reference a port. Retain the logic to debug
log about this, though.
Tomi Valkeinen [Tue, 15 Aug 2017 13:04:20 +0000 (16:04 +0300)]
drm/omap: remove no-op cleanup code
The driver sets crtc and plane rotation properties back to 0 degrees in
dev_lastclose() using drm_object_property_set_value().
drm_object_property_set_value() doesn't do anything with atomic drivers,
and a recent change added WARN_ON() when atomic driver calls the
function.
Laurent Pinchart [Fri, 11 Aug 2017 13:49:11 +0000 (16:49 +0300)]
ARM: OMAP2+: Don't register omapdss device for omapdrm
The omapdrm driver doesn't need the omapdss device anymore. Although it
can't be removed completely as the fbdev driver still requires it, we
can condition its registration to the usage of the omapfb driver.
Laurent Pinchart [Fri, 11 Aug 2017 13:49:08 +0000 (16:49 +0300)]
drm: omapdrm: Register omapdrm platform device in omapdss driver
The omapdrm platform device is a virtual device created for the sole
purpose of handling the omapdss/omapdrm driver split. It should
eventually be removed. As a first step to ease refactoring move its
registration from platform code to driver code.
The omapdrm driver name must be changed internally to avoid probing both
the device registered in platform code and the device registered in the
omapdss driver, as that would otherwise break bisection.
Laurent Pinchart [Fri, 11 Aug 2017 13:49:07 +0000 (16:49 +0300)]
drm: omapdrm: hdmi: Don't allocate PHY features dynamically
There's no need to allocate memory dynamically to duplicate the contents
of a const structure, only to store the memory pointer in a const
pointer field. Just use the original structures directly.
Laurent Pinchart [Fri, 11 Aug 2017 13:49:06 +0000 (16:49 +0300)]
drm: omapdrm: hdmi: Configure the PHY from the HDMI core version
The OMAP4 and OMAP5 HDMI PHYs have different properties that require
specific handling in the HDMI PHY driver. This needs knowledge of the
PHY version, which is currently inferred from the DSS version. As part
of the effort to remove usage of the DSS version, use the HDMI
controller version instead.
Laurent Pinchart [Fri, 11 Aug 2017 13:49:05 +0000 (16:49 +0300)]
drm: omapdrm: hdmi: Configure the PLL from the HDMI core version
The OMAP4 and OMAP5 PLLs have different properties that require specific
handling in the HDMI PLL driver. This needs knowledge of the PLL
version, which is currently inferred from the DSS version. AS part of
the effort to remove usage of the DSS version, use the HDMI controller
version instead.
Laurent Pinchart [Fri, 11 Aug 2017 13:49:04 +0000 (16:49 +0300)]
drm: omapdrm: hdmi: Pass HDMI core version as integer to HDMI audio
The HDMI audio driver only needs to know which generation of HDMI
transmitter it deals with, not the detailed SoC model. Pass the version
number as an integer to prepare for removal of the OMAP SoC version from
the omapdrm driver.
Laurent Pinchart [Fri, 11 Aug 2017 13:49:03 +0000 (16:49 +0300)]
drm: omapdrm: hdmi: Replace OMAP SoC model check with HDMI xmit version
The HDMI wrapper code only needs to differentiate between major OMAP
revisions, which can be obtained from the HDMI transmitter compatible
string. Replace the OMAP SoC model checks to prepare for removal of the
OMAP SoC version platform data.
Laurent Pinchart [Fri, 11 Aug 2017 13:49:02 +0000 (16:49 +0300)]
drm: omapdrm: hdmi: Rename functions and structures to use hdmi_ prefix
The dsi_pll_ops structure and dsi_init_pll_data() function incorrectly
use a dsi_ prefix, likely due to copy & paste. Fix it by using the
correct hdmi_ prefix.
Tomi Valkeinen [Thu, 10 Aug 2017 06:33:07 +0000 (09:33 +0300)]
drm/omap: add OMAP5 DSIPHY lane-enable support
We are missing OMAP5 DSIPHY lane-enable support, which has prevented
OMAP5 DSI working in mainline. This patch adds the lane-enable similarly
to the recently added OMAP4 version.
Moses Reuben [Wed, 16 Aug 2017 03:00:20 +0000 (23:00 -0400)]
drm/amdkfd: Adding new IOCTL for scratch memory v2
v2:
* Renamed ALLOC_MEMORY_OF_SCRATCH to SET_SCRATCH_BACKING_VA
* Removed size parameter from the ioctl, it was unused
* Removed hole in ioctl number space
* No more call to write_config_static_mem
* Return correct error code from ioctl
Moses Reuben [Wed, 16 Aug 2017 03:00:19 +0000 (23:00 -0400)]
drm/amdgpu: Add kgd/kfd interface to support scratch memory v2
v2:
* Shortened headline
* Removed write_config_static_mem, it gets initialized by gfx_v?_0_gpu_init
* Renamed alloc_memory_of_scratch to set_scratch_backing_va
* Made set_scratch_backing_va a void function
* Documented set_scratch_backing in kgd_kfd_interface.h
Felix Kuehling [Wed, 16 Aug 2017 03:00:15 +0000 (23:00 -0400)]
drm/amdkfd: Update PM4 packet headers
To match current firmware. The map process packet has been extended
to support scratch. This is a non-backwards compatible change and
it's about two years old. So no point keeping the old version around
conditionally.
Felix Kuehling [Wed, 16 Aug 2017 03:00:12 +0000 (23:00 -0400)]
drm/amdkfd: Handle remaining BUG_ONs more gracefully v2
In most cases, BUG_ONs can be replaced with WARN_ON with an error
return. In some void functions just turn them into a WARN_ON and
possibly an early exit.
v2:
* Cleaned up error handling in pm_send_unmap_queue
* Removed redundant WARN_ON in kfd_process_destroy_delayed
projects / linux.git / log