Ryusuke Konishi [Sun, 20 Oct 2024 04:51:28 +0000 (13:51 +0900)]
nilfs2: fix potential deadlock with newly created symlinks
Syzbot reported that page_symlink(), called by nilfs_symlink(), triggers
memory reclamation involving the filesystem layer, which can result in
circular lock dependencies among the reader/writer semaphore
nilfs->ns_segctor_sem, s_writers percpu_rwsem (intwrite) and the
fs_reclaim pseudo lock.
This is because after commit 21fc61c73c39 ("don't put symlink bodies in
pagecache into highmem"), the gfp flags of the page cache for symbolic
links are overwritten to GFP_KERNEL via inode_nohighmem().
This is not a problem for symlinks read from the backing device, because
the __GFP_FS flag is dropped after inode_nohighmem() is called. However,
when a new symlink is created with nilfs_symlink(), the gfp flags remain
overwritten to GFP_KERNEL. Then, memory allocation called from
page_symlink() etc. triggers memory reclamation including the FS layer,
which may call nilfs_evict_inode() or nilfs_dirty_inode(). And these can
cause a deadlock if they are called while nilfs->ns_segctor_sem is held:
Fix this issue by dropping the __GFP_FS flag from the page cache GFP flags
of newly created symlinks in the same way that nilfs_new_inode() and
__nilfs_read_inode() do, as a workaround until we adopt nofs allocation
scope consistently or improve the locking constraints.
Phillip Lougher [Sun, 20 Oct 2024 23:22:00 +0000 (00:22 +0100)]
Squashfs: fix variable overflow in squashfs_readpage_block
Syzbot reports a slab out of bounds access in squashfs_readpage_block().
This is caused by an attempt to read page index 0x2000000000. This value
(start_index) is stored in an integer loop variable which overflows
producing a value of 0. This causes a loop which iterates over pages
start_index -> end_index to iterate over 0 -> end_index, which ultimately
causes an out of bounds page array access.
Fix by changing variable to a loff_t, and rename to index to make it
clearer it is a page index, and not a loop count.
Andrey Konovalov [Tue, 22 Oct 2024 16:07:06 +0000 (18:07 +0200)]
kasan: remove vmalloc_percpu test
Commit 1a2473f0cbc0 ("kasan: improve vmalloc tests") added the
vmalloc_percpu KASAN test with the assumption that __alloc_percpu always
uses vmalloc internally, which is tagged by KASAN.
However, __alloc_percpu might allocate memory from the first per-CPU
chunk, which is not allocated via vmalloc(). As a result, the test might
fail.
Remove the test until proper KASAN annotation for the per-CPU allocated
are added; tracked in https://bugzilla.kernel.org/show_bug.cgi?id=215019.
Wladislav Wiebe [Tue, 22 Oct 2024 17:21:13 +0000 (19:21 +0200)]
tools/mm: -Werror fixes in page-types/slabinfo
Commit e6d2c436ff693 ("tools/mm: allow users to provide additional
cflags/ldflags") passes now CFLAGS to Makefile. With this, build systems
with default -Werror enabled found:
slabinfo.c:1300:25: error: ignoring return value of 'chdir'
declared with attribute 'warn_unused_result' [-Werror=unused-result]
chdir("..");
^~~~~~~~~~~
page-types.c:397:35: error: format '%lu' expects argument of type
'long unsigned int', but argument 2 has type 'uint64_t'
{aka 'long long unsigned int'} [-Werror=format=]
printf("%lu\t", mapcnt0);
~~^ ~~~~~~~
..
Fix page-types by using PRIu64 for uint64_t prints and check in slabinfo
for return code on chdir("..").
Kairui Song [Tue, 22 Oct 2024 17:55:12 +0000 (01:55 +0800)]
mm, swap: avoid over reclaim of full clusters
When running low on usable slots, cluster allocator will try to reclaim
the full clusters aggressively to reclaim HAS_CACHE slots. This
guarantees that as long as there are any usable slots, HAS_CACHE or not,
the swap device will be usable and workload won't go OOM early.
Before the cluster allocator, swap allocator fails easily if device is
filled up with reclaimable HAS_CACHE slots. Which can be easily
reproduced with following simple program:
Setup an 8G non ramdisk swap, the first run of the program will swapout 8G
ram successfully. But run same program again after the first run paused,
the second run can't swapout all 8G memory as now half of the swap device
is pinned by HAS_CACHE. There was a random scan in the old allocator that
may reclaim part of the HAS_CACHE by luck, but it's unreliable.
The new allocator's added reclaim of full clusters when device is low on
usable slots. But when multiple CPUs are seeing the device is low on
usable slots at the same time, they ran into a thundering herd problem.
This is an observable problem on large machine with mass parallel
workload, as full cluster reclaim is slower on large swap device and
higher number of CPUs will also make things worse.
Testing using a 128G ZRAM on a 48c96t system. When the swap device is
very close to full (eg. 124G / 128G), running build linux kernel with
make -j96 in a 1G memory cgroup will hung (not a softlockup though)
spinning in full cluster reclaim for about ~5min before go OOM.
To solve this, split the full reclaim into two parts:
- Instead of do a synchronous aggressively reclaim when device is low,
do only one aggressively reclaim when device is strictly full with a
kworker. This still ensures in worst case the device won't be unusable
because of HAS_CACHE slots.
- To avoid allocation (especially higher order) suffer from HAS_CACHE
filling up clusters and kworker not responsive enough, do one synchronous
scan every time the free list is drained, and only scan one cluster. This
is kind of similar to the random reclaim before, keeps the full clusters
rotated and has a minimal latency. This should provide a fair reclaim
strategy suitable for most workloads.
Zi Yan [Wed, 23 Oct 2024 17:12:36 +0000 (13:12 -0400)]
mm: avoid VM_BUG_ON when try to map an anon large folio to zero page.
An anonymous large folio can be split into non order-0 folios,
try_to_map_unused_to_zeropage() should not VM_BUG_ON compound pages but
just return false. This fixes the crash when splitting anonymous large
folios to non order-0 folios.
Hao Ge [Sun, 20 Oct 2024 07:08:19 +0000 (15:08 +0800)]
mm/codetag: fix null pointer check logic for ref and tag
When we compile and load lib/slub_kunit.c,it will cause a panic.
The root cause is that __kmalloc_cache_noprof was directly called instead
of kmem_cache_alloc,which resulted in no alloc_tag being allocated.This
caused current->alloc_tag to be null,leading to a null pointer dereference
in alloc_tag_ref_set.
Despite the fact that my colleague Pei Xiao will later fix the code in
slub_kunit.c,we still need fix null pointer check logic for ref and tag to
avoid panic caused by a null pointer dereference.
John Hubbard [Fri, 18 Oct 2024 22:34:11 +0000 (15:34 -0700)]
mm/gup: stop leaking pinned pages in low memory conditions
If a driver tries to call any of the pin_user_pages*(FOLL_LONGTERM) family
of functions, and requests "too many" pages, then the call will
erroneously leave pages pinned. This is visible in user space as an
actual memory leak.
Repro is trivial: just make enough pin_user_pages(FOLL_LONGTERM) calls to
exhaust memory.
The root cause of the problem is this sequence, within
__gup_longterm_locked():
...which gets retried in a loop. The loop error handling is incomplete,
clearly due to a somewhat unusual and complicated tri-state error API.
But anyway, if -ENOMEM, or in fact, any unexpected error is returned from
check_and_migrate_movable_pages(), then __gup_longterm_locked() happily
returns the error, while leaving the pages pinned.
In the failed case, which is an app that requests (via a device driver) 30720000000 bytes to be pinned, and then exits, I see this:
Note that the child routine, check_and_migrate_movable_folios(), avoids
this problem, by unpinning any folios in the **folios argument, before
returning an error.
Fix this by making check_and_migrate_movable_pages() behave in exactly the
same way as check_and_migrate_movable_folios(): unpin all pages in
**pages, before returning an error.
Also, documentation was an aggravating factor, so:
1) Consolidate the documentation for these two routines, now that they
have identical external behavior.
2) Rewrite the consolidated documentation:
a) Clearly list the three return code cases, and what happens in
each case.
b) Mention that one of the cases unpins the pages or folios, before
returning an error code.
Barry Song [Thu, 26 Sep 2024 21:19:36 +0000 (09:19 +1200)]
mm: avoid unconditional one-tick sleep when swapcache_prepare fails
Commit 13ddaf26be32 ("mm/swap: fix race when skipping swapcache")
introduced an unconditional one-tick sleep when `swapcache_prepare()`
fails, which has led to reports of UI stuttering on latency-sensitive
Android devices. To address this, we can use a waitqueue to wake up tasks
that fail `swapcache_prepare()` sooner, instead of always sleeping for a
full tick. While tasks may occasionally be woken by an unrelated
`do_swap_page()`, this method is preferable to two scenarios: rapid
re-entry into page faults, which can cause livelocks, and multiple
millisecond sleeps, which visibly degrade user experience.
Oven's testing shows that a single waitqueue resolves the UI stuttering
issue. If a 'thundering herd' problem becomes apparent later, a waitqueue
hash similar to `folio_wait_table[PAGE_WAIT_TABLE_SIZE]` for page bit
locks can be introduced.
Jeff Xu [Tue, 8 Oct 2024 04:09:41 +0000 (04:09 +0000)]
mseal: update mseal.rst
Pedro Falcato's optimization [1] for checking sealed VMAs, which replaces
the can_modify_mm() function with an in-loop check, necessitates an update
to the mseal.rst documentation to reflect this change.
Furthermore, the document has received offline comments regarding the code
sample and suggestions for sentence clarification to enhance reader
comprehension.
mm: split critical region in remap_file_pages() and invoke LSMs in between
Commit ea7e2d5e49c0 ("mm: call the security_mmap_file() LSM hook in
remap_file_pages()") fixed a security issue, it added an LSM check when
trying to remap file pages, so that LSMs have the opportunity to evaluate
such action like for other memory operations such as mmap() and
mprotect().
However, that commit called security_mmap_file() inside the mmap_lock
lock, while the other calls do it before taking the lock, after commit 8b3ec6814c83 ("take security_mmap_file() outside of ->mmap_sem").
This caused lock inversion issue with IMA which was taking the mmap_lock
and i_mutex lock in the opposite way when the remap_file_pages() system
call was called.
Solve the issue by splitting the critical region in remap_file_pages() in
two regions: the first takes a read lock of mmap_lock, retrieves the VMA
and the file descriptor associated, and calculates the 'prot' and 'flags'
variables; the second takes a write lock on mmap_lock, checks that the VMA
flags and the VMA file descriptor are the same as the ones obtained in the
first critical region (otherwise the system call fails), and calls
do_mmap().
In between, after releasing the read lock and before taking the write
lock, call security_mmap_file(), and solve the lock inversion issue.
Edward Liaw [Fri, 18 Oct 2024 17:17:24 +0000 (17:17 +0000)]
selftests/mm: fix deadlock for fork after pthread_create with atomic_bool
Some additional synchronization is needed on Android ARM64; we see a
deadlock with pthread_create when the parent thread races forward before
the child has a chance to start doing work.
uffd_poll_thread may be called by other tests that do not initialize the
pthread_barrier, so this approach is not correct. This will revert to
using atomic_bool instead.
Edward Liaw [Fri, 18 Oct 2024 17:17:22 +0000 (17:17 +0000)]
Revert "selftests/mm: fix deadlock for fork after pthread_create on ARM"
Patch series "selftests/mm: revert pthread_barrier change"
On Android arm, pthread_create followed by a fork caused a deadlock in
the case where the fork required work to be completed by the created
thread.
The previous patches incorrectly assumed that the parent would
always initialize the pthread_barrier for the child thread. This
reverts the change and replaces the fix for wp-fork-with-event with the
original use of atomic_bool.
fork_event_consumer may be called by other tests that do not initialize
the pthread_barrier, so this approach is not correct. The subsequent
patch will revert to using atomic_bool instead.
Lorenzo Stoakes [Thu, 17 Oct 2024 14:31:46 +0000 (15:31 +0100)]
tools: testing: add expand-only mode VMA test
Add a test to assert that VMG_FLAG_JUST_EXPAND functions as expected - that
is, when the VMA iterator is positioned at the previous VMA and no VMAs
proceed it, we observe an expansion with all state as expected.
Explicitly place a prior VMA that would otherwise fail this test if the
mode were not enabled (as it would traverse to the previous-previous VMA).
Lorenzo Stoakes [Thu, 17 Oct 2024 14:31:45 +0000 (15:31 +0100)]
mm/vma: add expand-only VMA merge mode and optimise do_brk_flags()
Patch series "introduce VMA merge mode to improve brk() performance".
A ~5% performance regression was discovered on the
aim9.brk_test.ops_per_sec by the linux kernel test bot [0].
In the past to satisfy brk() performance we duplicated VMA expansion code
and special-cased do_brk_flags(). This is however horrid and undoes work
to abstract this logic, so in resolving the issue I have endeavoured to
avoid this.
Investigating further I was able to observe that the use of a
vma_iter_next_range() and vma_prev() pair, causing an unnecessary maple
tree walk. In addition there is work that we do that is simply
unnecessary for brk().
Therefore, add a special VMA merge mode VMG_FLAG_JUST_EXPAND to avoid
doing any of this - it assumes the VMA iterator is pointing at the
previous VMA and which skips logic that brk() does not require.
This mostly eliminates the performance regression reducing it to ~2% which
is in the realm of noise. In addition, the will-it-scale test brk2,
written to be more representative of real-world brk() usage, shows a
modest performance improvement - which gives me confidence that we are not
meaningfully regressing real workloads here.
This series includes a test asserting that the 'just expand' mode works as
expected.
With many thanks to Oliver Sang for helping with performance testing of
candidate patch sets!
We know in advance that do_brk_flags() wants only to perform a VMA
expansion (if the prior VMA is compatible), and that we assume no
mergeable VMA follows it.
These are the semantics of this function prior to the recent rewrite of
the VMA merging logic, however we are now doing more work than necessary -
positioning the VMA iterator at the prior VMA and performing tasks that
are not required.
Add a new field to the vmg struct to permit merge flags and add a new
merge flag VMG_FLAG_JUST_EXPAND which implies this behaviour, and have
do_brk_flags() use this.
This fixes a reported performance regression in a brk() benchmarking suite.
Gregory Price [Thu, 17 Oct 2024 19:03:47 +0000 (15:03 -0400)]
resource,kexec: walk_system_ram_res_rev must retain resource flags
walk_system_ram_res_rev() erroneously discards resource flags when passing
the information to the callback.
This causes systems with IORESOURCE_SYSRAM_DRIVER_MANAGED memory to have
these resources selected during kexec to store kexec buffers if that
memory happens to be at placed above normal system ram.
This leads to undefined behavior after reboot. If the kexec buffer is
never touched, nothing happens. If the kexec buffer is touched, it could
lead to a crash (like below) or undefined behavior.
Tested on a system with CXL memory expanders with driver managed memory,
TPM enabled, and CONFIG_IMA_KEXEC=y. Adding printk's showed the flags
were being discarded and as a result the check for
IORESOURCE_SYSRAM_DRIVER_MANAGED passes.
Ryusuke Konishi [Thu, 17 Oct 2024 19:33:10 +0000 (04:33 +0900)]
nilfs2: fix kernel bug due to missing clearing of checked flag
Syzbot reported that in directory operations after nilfs2 detects
filesystem corruption and degrades to read-only,
__block_write_begin_int(), which is called to prepare block writes, may
fail the BUG_ON check for accesses exceeding the folio/page size,
triggering a kernel bug.
This was found to be because the "checked" flag of a page/folio was not
cleared when it was discarded by nilfs2's own routine, which causes the
sanity check of directory entries to be skipped when the directory
page/folio is reloaded. So, fix that.
This was necessary when the use of nilfs2's own page discard routine was
applied to more than just metadata files.
mm: numa_clear_kernel_node_hotplug: Add NUMA_NO_NODE check for node id
The acquired memory blocks for reserved may include blocks outside of
memory management. In this case, the nid variable is set to NUMA_NO_NODE
(-1), so an error occurs in node_set(). This adds a check using
numa_valid_node() to numa_clear_kernel_node_hotplug() that skips
node_set() when nid is set to NUMA_NO_NODE.
ocfs2: pass u64 to ocfs2_truncate_inline maybe overflow
Syzbot reported a kernel BUG in ocfs2_truncate_inline. There are two
reasons for this: first, the parameter value passed is greater than
ocfs2_max_inline_data_with_xattr, second, the start and end parameters of
ocfs2_truncate_inline are "unsigned int".
So, we need to add a sanity check for byte_start and byte_len right before
ocfs2_truncate_inline() in ocfs2_remove_inode_range(), if they are greater
than ocfs2_max_inline_data_with_xattr return -EINVAL.
read to 0xffff888102eb3260 of 4 bytes by task 3498 on cpu 0:
inode_get_ctime_nsec include/linux/fs.h:1623 [inline]
inode_get_ctime include/linux/fs.h:1629 [inline]
generic_fillattr+0x1dd/0x2f0 fs/stat.c:62
shmem_getattr+0x17b/0x200 mm/shmem.c:1157
vfs_getattr_nosec fs/stat.c:166 [inline]
vfs_getattr+0x19b/0x1e0 fs/stat.c:207
vfs_statx_path fs/stat.c:251 [inline]
vfs_statx+0x134/0x2f0 fs/stat.c:315
vfs_fstatat+0xec/0x110 fs/stat.c:341
__do_sys_newfstatat fs/stat.c:505 [inline]
__se_sys_newfstatat+0x58/0x260 fs/stat.c:499
__x64_sys_newfstatat+0x55/0x70 fs/stat.c:499
x64_sys_call+0x141f/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:263
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x54/0x120 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x76/0x7e
value changed: 0x2755ae53 -> 0x27ee44d3
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 UID: 0 PID: 3498 Comm: udevd Not tainted 6.11.0-rc6-syzkaller-00326-gd1f2d51b711a-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
==================================================================
When calling generic_fillattr(), if you don't hold read lock, data-race
will occur in inode member variables, which can cause unexpected
behavior.
Since there is no special protection when shmem_getattr() calls
generic_fillattr(), data-race occurs by functions such as shmem_unlink()
or shmem_mknod(). This can cause unexpected results, so commenting it out
is not enough.
Therefore, when calling generic_fillattr() from shmem_getattr(), it is
appropriate to protect the inode using inode_lock_shared() and
inode_unlock_shared() to prevent data-race.
Jann Horn [Wed, 16 Oct 2024 15:07:53 +0000 (17:07 +0200)]
mm: mark mas allocation in vms_abort_munmap_vmas as __GFP_NOFAIL
vms_abort_munmap_vmas() is a recovery path where, on entry, some VMAs have
already been torn down halfway (in a way we can't undo) but are still
present in the maple tree.
At this point, we *must* remove the VMAs from the VMA tree, otherwise we
get UAF.
Because removing VMA tree nodes can require memory allocation, the
existing code has an error path which tries to handle this by reattaching
the VMAs; but that can't be done safely.
A nicer way to fix it would probably be to preallocate enough maple tree
nodes for the removal before the point of no return, or something like
that; but for now, fix it the easy and kinda ugly way, by marking this
allocation __GFP_NOFAIL.
x86/traps: move kmsan check after instrumentation_begin
During x86_64 kernel build with CONFIG_KMSAN, the objtool warns following:
AR built-in.a
AR vmlinux.a
LD vmlinux.o
vmlinux.o: warning: objtool: handle_bug+0x4: call to
kmsan_unpoison_entry_regs() leaves .noinstr.text section
OBJCOPY modules.builtin.modinfo
GEN modules.builtin
MODPOST Module.symvers
CC .vmlinux.export.o
Moving kmsan_unpoison_entry_regs() _after_ instrumentation_begin() fixes
the warning.
There is decode_bug(regs->ip, &imm) is left before KMSAN unpoisoining, but
it has the return condition and if we include it after
instrumentation_begin() it results the warning "return with
instrumentation enabled", hence, I'm concerned that regs will not be KMSAN
unpoisoned if `ud_type == BUG_NONE` is true.
Huang Ying [Tue, 15 Oct 2024 05:15:54 +0000 (13:15 +0800)]
resource: remove dependency on SPARSEMEM from GET_FREE_REGION
We want to use the functions (get_free_mem_region()) configured via
GET_FREE_REGION in resource kunit tests. However, GET_FREE_REGION
depends on SPARSEMEM now. This makes resource kunit tests cannot be
built on some architectures lacking SPARSEMEM, or causes config warning
as follows,
WARNING: unmet direct dependencies detected for GET_FREE_REGION
Depends on [n]: SPARSEMEM [=n]
Selected by [y]:
- RESOURCE_KUNIT_TEST [=y] && RUNTIME_TESTING_MENU [=y] && KUNIT [=y]
When get_free_mem_region() was introduced the only consumers were those
looking to pass the address range to memremap_pages(). That address
range needed to be mindful of the maximum addressable platform physical
address which at the time only SPARSMEM defined via MAX_PHYSMEM_BITS.
Given that memremap_pages() also depended on SPARSEMEM via ZONE_DEVICE,
it was easier to just depend on that definition than invent a general
MAX_PHYSMEM_BITS concept outside of SPARSEMEM.
Turns out that decision was buggy and did not account for KASAN
consumption of physical address space. That problem was resolved
recently with commit ea72ce5da228 ("x86/kaslr: Expose and use the end
of the physical memory address space"), and GET_FREE_REGION dropped its
MAX_PHYSMEM_BITS dependency.
Then commit 99185c10d5d9 ("resource, kunit: add test case for
region_intersects()"), went ahead and fixed up the only remaining
dependency on SPARSEMEM which was usage of the PA_SECTION_SHIFT macro
for setting the default alignment. A PAGE_SIZE fallback is fine in the
SPARSEMEM=n case.
With those build dependencies gone GET_FREE_REGION no longer depends on
SPARSEMEM. So, the patch removes dependency on SPARSEMEM from
GET_FREE_REGION to fix the build issues.
Liam R. Howlett [Wed, 16 Oct 2024 01:34:55 +0000 (21:34 -0400)]
mm/mmap: fix race in mmap_region() with ftruncate()
Avoiding the zeroing of the vma tree in mmap_region() introduced a race
with truncate in the page table walk. To avoid any races, create a hole
in the rmap during the operation by clearing the pagetable entries earlier
under the mmap write lock and (critically) before the new vma is installed
into the vma tree. The result is that the old vma(s) are left in the vma
tree, but free_pgtables() removes them from the rmap and clears the ptes
while holding the necessary locks.
This change extends the fix required for hugetblfs and the call_mmap()
function by moving the cleanup higher in the function and running it
unconditionally.
Matt Fleming [Fri, 11 Oct 2024 12:07:37 +0000 (13:07 +0100)]
mm/page_alloc: let GFP_ATOMIC order-0 allocs access highatomic reserves
Under memory pressure it's possible for GFP_ATOMIC order-0 allocations to
fail even though free pages are available in the highatomic reserves.
GFP_ATOMIC allocations cannot trigger unreserve_highatomic_pageblock()
since it's only run from reclaim.
Given that such allocations will pass the watermarks in
__zone_watermark_unusable_free(), it makes sense to fallback to highatomic
reserves the same way that ALLOC_OOM can.
This fixes order-0 page allocation failures observed on Cloudflare's fleet
when handling network packets:
Lorenzo Stoakes [Tue, 15 Oct 2024 17:56:06 +0000 (18:56 +0100)]
fork: only invoke khugepaged, ksm hooks if no error
There is no reason to invoke these hooks early against an mm that is in an
incomplete state.
The change in commit d24062914837 ("fork: use __mt_dup() to duplicate
maple tree in dup_mmap()") makes this more pertinent as we may be in a
state where entries in the maple tree are not yet consistent.
Their placement early in dup_mmap() only appears to have been meaningful
for early error checking, and since functionally it'd require a very small
allocation to fail (in practice 'too small to fail') that'd only occur in
the most dire circumstances, meaning the fork would fail or be OOM'd in
any case.
Since both khugepaged and KSM tracking are there to provide optimisations
to memory performance rather than critical functionality, it doesn't
really matter all that much if, under such dire memory pressure, we fail
to register an mm with these.
As a result, we follow the example of commit d2081b2bf819 ("mm:
khugepaged: make khugepaged_enter() void function") and make ksm_fork() a
void function also.
We only expose the mm to these functions once we are done with them and
only if no error occurred in the fork operation.
Lorenzo Stoakes [Tue, 15 Oct 2024 17:56:05 +0000 (18:56 +0100)]
fork: do not invoke uffd on fork if error occurs
Patch series "fork: do not expose incomplete mm on fork".
During fork we may place the virtual memory address space into an
inconsistent state before the fork operation is complete.
In addition, we may encounter an error during the fork operation that
indicates that the virtual memory address space is invalidated.
As a result, we should not be exposing it in any way to external machinery
that might interact with the mm or VMAs, machinery that is not designed to
deal with incomplete state.
We specifically update the fork logic to defer khugepaged and ksm to the
end of the operation and only to be invoked if no error arose, and
disallow uffd from observing fork events should an error have occurred.
This patch (of 2):
Currently on fork we expose the virtual address space of a process to
userland unconditionally if uffd is registered in VMAs, regardless of
whether an error arose in the fork.
This is performed in dup_userfaultfd_complete() which is invoked
unconditionally, and performs two duties - invoking registered handlers
for the UFFD_EVENT_FORK event via dup_fctx(), and clearing down
userfaultfd_fork_ctx objects established in dup_userfaultfd().
This is problematic, because the virtual address space may not yet be
correctly initialised if an error arose.
The change in commit d24062914837 ("fork: use __mt_dup() to duplicate
maple tree in dup_mmap()") makes this more pertinent as we may be in a
state where entries in the maple tree are not yet consistent.
We address this by, on fork error, ensuring that we roll back state that
we would otherwise expect to clean up through the event being handled by
userland and perform the memory freeing duty otherwise performed by
dup_userfaultfd_complete().
We do this by implementing a new function, dup_userfaultfd_fail(), which
performs the same loop, only decrementing reference counts.
Note that we perform mmgrab() on the parent and child mm's, however
userfaultfd_ctx_put() will mmdrop() this once the reference count drops to
zero, so we will avoid memory leaks correctly here.
mm/pagewalk: fix usage of pmd_leaf()/pud_leaf() without present check
pmd_leaf()/pud_leaf() only implies a pmd_present()/pud_present() check on
some architectures. We really should check for
pmd_present()/pud_present() first.
This should explain the report we got on ppc64 (which has
CONFIG_PGTABLE_HAS_HUGE_LEAVES set in the config) that triggered:
VM_WARN_ON_ONCE(pmd_leaf(pmdp_get_lockless(pmdp)));
Likely we had a PMD migration entry for which pmd_leaf() did not trigger.
We raced with restoring the PMD migration entry, and suddenly saw a
pmd_leaf(). In this case, pte_offset_map_lock() saved us from more
trouble, because it rechecks the PMD value, but we would not have
processed the migration entry -- which is not too bad because the only
user of FW_MIGRATION is KSM for unsharing, and KSM only applies to small
folios.
Further, we shouldn't re-read the PMD/PUD value for our warning, the
primary purpose of the VM_WARN_ON_ONCE() is to find spurious use of
pmd_leaf()/pud_leaf() without CONFIG_PGTABLE_HAS_HUGE_LEAVES.
As a side note, we are currently not implementing FW_MIGRATION support for
PUD migration entries, which likely should exist due to hugetlb. Add a
TODO so this won't fall through the cracks if more FW_MIGRATION users get
added.
Was able to write a quick reproducer and verify that the issue no longer triggers with this fix.
Linus Torvalds [Sun, 27 Oct 2024 19:01:36 +0000 (09:01 -1000)]
Merge tag 'x86_urgent_for_v6.12_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Prevent a certain range of pages which get marked as hypervisor-only,
to get allocated to a CoCo (SNP) guest which cannot use them and thus
fail booting
- Fix the microcode loader on AMD to pay attention to the stepping of a
patch and to handle the case where a BIOS config option splits the
machine into logical NUMA nodes per L3 cache slice
- Disable LAM from being built by default due to security concerns
* tag 'x86_urgent_for_v6.12_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Ensure that RMP table fixups are reserved
x86/microcode/AMD: Split load_microcode_amd()
x86/microcode/AMD: Pay attention to the stepping dynamically
x86/lam: Disable ADDRESS_MASKING in most cases
Linus Torvalds [Sun, 27 Oct 2024 18:56:22 +0000 (08:56 -1000)]
Merge tag 'ftrace-v6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace fixes from Steven Rostedt:
- Fix missing mutex unlock in error path of register_ftrace_graph()
A previous fix added a return on an error path and forgot to unlock
the mutex. Instead of dealing with error paths, use guard(mutex) as
the mutex is just released at the exit of the function anyway. Other
functions in this file should be updated with this, but that's a
cleanup and not a fix.
- Change cpuhp setup name to be consistent with other cpuhp states
The same fix that the above patch fixes added a cpuhp_setup_state()
call with the name of "fgraph_idle_init". I was informed that it
should instead be something like: "fgraph:online". Update that too.
* tag 'ftrace-v6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fgraph: Change the name of cpuhp state to "fgraph:online"
fgraph: Fix missing unlock in register_ftrace_graph()
Linus Torvalds [Sun, 27 Oct 2024 18:40:33 +0000 (08:40 -1000)]
Merge tag 'platform-drivers-x86-v6.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- Asus thermal profile fix, fixing performance issues on Lunar Lake
- Intel PMC: one revert for a lockdep issue and one bugfix
- Dell WMI: Ignore some WMI events on suspend/resume to silence warnings
* tag 'platform-drivers-x86-v6.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: asus-wmi: Fix thermal profile initialization
platform/x86: dell-wmi: Ignore suspend notifications
platform/x86/intel/pmc: Fix pmc_core_iounmap to call iounmap for valid addresses
platform/x86:intel/pmc: Revert "Enable the ACPI PM Timer to be turned off when suspended"
Linus Torvalds [Sun, 27 Oct 2024 18:36:01 +0000 (08:36 -1000)]
Merge tag 'firewire-fixes-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto:
"A single commit to resolve a regression existing in v6.11 or later.
The change in 1394 OHCI driver in v6.11 kernel could cause general
protection faults when rediscovering nodes in IEEE 1394 bus while
holding a spin lock. Consequently, watchdog checks can report a hard
lockup.
Currently, this issue is observed primarily during the system resume
phase when using an extra node with three ports or more is used.
However, it could potentially occur in the other cases as well"
* tag 'firewire-fixes-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: fix invalid port index for parent device
Linus Torvalds [Sun, 27 Oct 2024 18:29:36 +0000 (08:29 -1000)]
Merge tag 'block-6.12-20241026' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- Pull request for MD via Song fixing a few issues
- Fix a wrong check in blk_rq_map_user_bvec(), causing IO errors on
passthrough IO (Xinyu)
* tag 'block-6.12-20241026' of git://git.kernel.dk/linux:
block: fix sanity checks in blk_rq_map_user_bvec
md/raid10: fix null ptr dereference in raid10_size()
md: ensure child flush IO does not affect origin bio->bi_status
Linus Torvalds [Sun, 27 Oct 2024 18:23:49 +0000 (08:23 -1000)]
Merge tag 'xfs-6.12-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
- Fix recovery of allocator ops after a growfs
- Do not fail repairs on metadata files with no attr fork
* tag 'xfs-6.12-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: update the pag for the last AG at recovery time
xfs: don't use __GFP_RETRY_MAYFAIL in xfs_initialize_perag
xfs: error out when a superblock buffer update reduces the agcount
xfs: update the file system geometry after recoverying superblock buffers
xfs: merge the perag freeing helpers
xfs: pass the exact range to initialize to xfs_initialize_perag
xfs: don't fail repairs on metadata files with no attr fork
Takashi Sakamoto [Fri, 25 Oct 2024 03:41:37 +0000 (12:41 +0900)]
firewire: core: fix invalid port index for parent device
In a commit 24b7f8e5cd65 ("firewire: core: use helper functions for self
ID sequence"), the enumeration over self ID sequence was refactored with
some helper functions with KUnit tests. These helper functions are
guaranteed to work expectedly by the KUnit tests, however their application
includes a mistake to assign invalid value to the index of port connected
to parent device.
This bug affects the case that any extra node devices which has three or
more ports are connected to 1394 OHCI controller. In the case, the path
to update the tree cache could hits WARN_ON(), and gets general protection
fault due to the access to invalid address computed by the invalid value.
This commit fixes the bug to assign correct port index.
When support for vivobook fan profiles was added, the initial
call to throttle_thermal_policy_set_default() was removed, which
however is necessary for full initialization.
Fix this by calling throttle_thermal_policy_set_default() again
when setting up the platform profile.
Linus Torvalds [Fri, 25 Oct 2024 22:25:02 +0000 (15:25 -0700)]
Merge tag '9p-for-6.12-rc5' of https://github.com/martinetd/linux
Pull more 9p reverts from Dominique Martinet:
"Revert patches causing inode collision problems.
The code simplification introduced significant regressions on servers
that do not remap inode numbers when exporting multiple underlying
filesystems with colliding inodes. See the top-most revert (commit be2ca3825372) for details.
This problem had been ignored for too long and the reverts will also
head to stable (6.9+).
I'm confident this set of patches gets us back to previous behaviour
(another related patch had already been reverted back in April and
we're almost back to square 1, and the rest didn't touch inode
lifecycle)"
* tag '9p-for-6.12-rc5' of https://github.com/martinetd/linux:
Revert "fs/9p: simplify iget to remove unnecessary paths"
Revert "fs/9p: fix uaf in in v9fs_stat2inode_dotl"
Revert "fs/9p: remove redundant pointer v9ses"
Revert " fs/9p: mitigate inode collisions"
Linus Torvalds [Fri, 25 Oct 2024 18:45:22 +0000 (11:45 -0700)]
Merge tag 'v6.12-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Fix init module error caseb
- Fix memory allocation error path (for passwords) in mount
* tag 'v6.12-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix warning when destroy 'cifs_io_request_pool'
smb: client: Handle kstrdup failures for passwords
Linus Torvalds [Fri, 25 Oct 2024 18:41:18 +0000 (11:41 -0700)]
Merge tag 'fuse-fixes-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
- Fix cached size after passthrough writes
This fix needed a trivial change in the backing-file API, which
resulted in some non-fuse files being touched.
- Revert a commit meant as a cleanup but which triggered a WARNING
- Remove a stray debug line left-over
* tag 'fuse-fixes-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: remove stray debug line
Revert "fuse: move initialization of fuse_file to fuse_writepages() instead of in callback"
fuse: update inode size after extending passthrough write
fs: pass offset and result to backing_file end_write() callback
Linus Torvalds [Fri, 25 Oct 2024 18:38:15 +0000 (11:38 -0700)]
Merge tag 'nfsd-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix a couple of use-after-free bugs
* tag 'nfsd-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: cancel nfsd_shrinker_work using sync mode in nfs4_state_shutdown_net
nfsd: fix race between laundromat and free_stateid
Linus Torvalds [Fri, 25 Oct 2024 18:04:34 +0000 (11:04 -0700)]
Merge tag 'acpi-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix an ACPI PRM (Platform Runtime Mechanism) issue and add two
new DMI quirks, one for an ACPI IRQ override and one for lid switch
detection:
- Make acpi_parse_prmt() look for EFI_MEMORY_RUNTIME memory regions
only to comply with the UEFI specification and make PRM use
efi_guid_t instead of guid_t to avoid a compiler warning triggered
by that change (Koba Ko, Dan Carpenter)
- Add an ACPI IRQ override quirk for LG 16T90SP (Christian Heusel)
- Add a lid switch detection quirk for Samsung Galaxy Book2 (Shubham
Panwar)"
* tag 'acpi-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PRM: Clean up guid type in struct prm_handler_info
ACPI: button: Add DMI quirk for Samsung Galaxy Book2 to fix initial lid detection issue
ACPI: resource: Add LG 16T90SP to irq1_level_low_skip_override[]
ACPI: PRM: Find EFI_MEMORY_RUNTIME block for PRM handler and context
Linus Torvalds [Fri, 25 Oct 2024 18:00:50 +0000 (11:00 -0700)]
Merge tag 'pm-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Update cpufreq documentation to match the code after recent changes
(Christian Loehle), fix a units conversion issue in the CPPC cpufreq
driver (liwei), and fix an error check in the dtpm_devfreq power
capping driver (Yuan Can)"
* tag 'pm-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: CPPC: fix perf_to_khz/khz_to_perf conversion exception
powercap: dtpm_devfreq: Fix error check against dev_pm_qos_add_request()
cpufreq: docs: Reflect latency changes in docs
Linus Torvalds [Fri, 25 Oct 2024 17:56:06 +0000 (10:56 -0700)]
Merge tag 'pci-v6.12-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Hold the rescan lock while adding devices to avoid race with
concurrent pwrctl rescan that can lead to a crash (Bartosz
Golaszewski)
- Avoid binding pwrctl driver to QCom WCN wifi if the DT lacks the
necessary PMU regulator descriptions (Bartosz Golaszewski)
* tag 'pci-v6.12-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/pwrctl: Abandon QCom WCN probe on pre-pwrseq device-trees
PCI: Hold rescan lock while adding devices during host probe
Linus Torvalds [Fri, 25 Oct 2024 17:42:29 +0000 (10:42 -0700)]
Merge tag 'ata-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Niklas Cassel:
- Fix the handling of ATA commands that timeout (command that did not
receive a completion interrupt within the configured timeout time).
Commands that timeout, while also having either the FAILFAST flag
set, or the command being a passthrough command, should never be
retried. Restore this behavior (as it was before v6.12-rc1).
* tag 'ata-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata: Set DID_TIME_OUT for commands that actually timed out
Linus Torvalds [Fri, 25 Oct 2024 17:35:29 +0000 (10:35 -0700)]
Merge tag 'sound-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The majority of changes here are about ASoC.
There are two core changes in ASoC (the bump of minimal topology ABI
version and the fix for references of components in DAPM code), and
others are mostly various device-specific fixes for SoundWire, AMD,
Intel, SOF, Qualcomm and FSL, in addition to a few usual HD-audio
quirks and fixes"
* tag 'sound-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (33 commits)
ALSA: hda/realtek: Update default depop procedure
ASoC: qcom: sc7280: Fix missing Soundwire runtime stream alloc
ASoC: fsl_micfil: Add sample rate constraint
ASoC: rt722-sdca: increase clk_stop_timeout to fix clock stop issue
ALSA: hda/tas2781: select CRC32 instead of CRC32_SARWATE
ALSA: hda/realtek: Add subwoofer quirk for Acer Predator G9-593
ALSA: firewire-lib: Avoid division by zero in apply_constraint_to_size()
ASoC: fsl_micfil: Add a flag to distinguish with different volume control types
ASoC: codecs: lpass-rx-macro: fix RXn(rx,n) macro for DSM_CTL and SEC7 regs
ASoC: Change my e-mail to gmail
ASoC: Intel: soc-acpi: lnl: Add match entry for TM2 laptops
ASoC: amd: yc: Fix non-functional mic on ASUS E1404FA
ASoC: SOF: Intel: hda: Always clean up link DMA during stop
soundwire: intel_ace2x: Send PDI stream number during prepare
ASoC: SOF: Intel: hda: Handle prepare without close for non-HDA DAI's
ASoC: SOF: ipc4-topology: Do not set ALH node_id for aggregated DAIs
MAINTAINERS: Update maintainer list for MICROCHIP ASOC, SSC and MCP16502 drivers
ASoC: qcom: Select missing common Soundwire module code on SDM845
ASoC: fsl_esai: change dev_warn to dev_dbg in irq handler
ASoC: rsnd: Fix probe failure on HiHope boards due to endpoint parsing
...
Linus Torvalds [Fri, 25 Oct 2024 17:29:51 +0000 (10:29 -0700)]
Merge tag 'drm-fixes-2024-10-25' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly drm fixes, mostly amdgpu and xe, with minor bridge and an i915
Kconfig fix. Nothing too scary and it seems to be pretty quiet.
i915:
- Fix DRM_I915_GVT_KVMGT dependencies in Kconfig
xe:
- Increase invalidation timeout to avoid errors in some hosts
- Flush worker on timeout
- Better handling for force wake failure
- Improve argument check on user fence creation
- Don't restart parallel queues multiple times on GT reset
bridge:
- aux: Fix assignment of OF node
- tc358767: Add missing of_node_put() in error path"
* tag 'drm-fixes-2024-10-25' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe: Don't restart parallel queues multiple times on GT reset
drm/xe/ufence: Prefetch ufence addr to catch bogus address
drm/xe: Handle unreliable MMIO reads during forcewake
drm/xe/guc/ct: Flush g2h worker in case of g2h response timeout
drm/xe: Enlarge the invalidation timeout from 150 to 500
drm/amdgpu: handle default profile on on devices without fullscreen 3D
drm/amd/display: Disable PSR-SU on Parade 08-01 TCON too
drm/amdgpu: fix random data corruption for sdma 7
drm/amd/display: temp w/a for DP Link Layer compliance
drm/amd/display: temp w/a for dGPU to enter idle optimizations
drm/amd/pm: update deep sleep status on smu v14.0.2/3
drm/amd/pm: update overdrive function on smu v14.0.2/3
drm/amd/pm: update the driver-fw interface file for smu v14.0.2/3
drm/amd: Guard against bad data for ATIF ACPI method
drm/bridge: tc358767: fix missing of_node_put() in for_each_endpoint_of_node()
drm/bridge: Fix assignment of the of_node of the parent to aux bridge
i915: fix DRM_I915_GVT_KVMGT dependencies
Linus Torvalds [Thu, 24 Oct 2024 20:23:56 +0000 (13:23 -0700)]
x86: fix whitespace in runtime-const assembler output
The x86 user pointer validation changes made me look at compiler output
a lot, and the wrong indentation for the ".popsection" in the generated
assembler triggered me.
Linus Torvalds [Thu, 24 Oct 2024 01:17:46 +0000 (18:17 -0700)]
x86: fix user address masking non-canonical speculation issue
It turns out that AMD has a "Meltdown Lite(tm)" issue with non-canonical
accesses in kernel space. And so using just the high bit to decide
whether an access is in user space or kernel space ends up with the good
old "leak speculative data" if you have the right gadget using the
result:
CVE-2020-12965 “Transient Execution of Non-Canonical Accesses“
Now, the kernel surrounds the access with a STAC/CLAC pair, and those
instructions end up serializing execution on older Zen architectures,
which closes the speculation window.
But that was true only up until Zen 5, which renames the AC bit [1].
That improves performance of STAC/CLAC a lot, but also means that the
speculation window is now open.
Note that this affects not just the new address masking, but also the
regular valid_user_address() check used by access_ok(), and the asm
version of the sign bit check in the get_user() helpers.
It does not affect put_user() or clear_user() variants, since there's no
speculative result to be used in a gadget for those operations.
Dave Airlie [Fri, 25 Oct 2024 06:55:35 +0000 (16:55 +1000)]
Merge tag 'drm-xe-fixes-2024-10-24-1' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Increase invalidation timeout to avoid errors in some hosts (Shuicheng)
- Flush worker on timeout (Badal)
- Better handling for force wake failure (Shuicheng)
- Improve argument check on user fence creation (Nirmoy)
- Don't restart parallel queues multiple times on GT reset (Nirmoy)
Steven Rostedt [Fri, 25 Oct 2024 02:29:44 +0000 (22:29 -0400)]
fgraph: Change the name of cpuhp state to "fgraph:online"
The cpuhp state name given to cpuhp_setup_state() is "fgraph_idle_init"
which doesn't really conform to the names that are used for cpu hotplug
setups. Instead rename it to "fgraph:online" to be in line with other
states.
Linus Torvalds [Thu, 24 Oct 2024 23:53:20 +0000 (16:53 -0700)]
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Daniel Borkmann:
- Fix an out-of-bounds read in bpf_link_show_fdinfo for BPF sockmap
link file descriptors (Hou Tao)
- Fix BPF arm64 JIT's address emission with tag-based KASAN enabled
reserving not enough size (Peter Collingbourne)
- Fix BPF verifier do_misc_fixups patching for inlining of the
bpf_get_branch_snapshot BPF helper (Andrii Nakryiko)
- Fix a BPF verifier bug and reject BPF program write attempts into
read-only marked BPF maps (Daniel Borkmann)
- Fix perf_event_detach_bpf_prog error handling by removing an invalid
check which would skip BPF program release (Jiri Olsa)
- Fix memory leak when parsing mount options for the BPF filesystem
(Hou Tao)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Check validity of link->type in bpf_link_show_fdinfo()
bpf: Add the missing BPF_LINK_TYPE invocation for sockmap
bpf: fix do_misc_fixups() for bpf_get_branch_snapshot()
bpf,perf: Fix perf_event_detach_bpf_prog error handling
selftests/bpf: Add test for passing in uninit mtu_len
selftests/bpf: Add test for writes to .rodata
bpf: Remove MEM_UNINIT from skb/xdp MTU helpers
bpf: Fix overloading of MEM_UNINIT's meaning
bpf: Add MEM_WRITE attribute
bpf: Preserve param->string when parsing mount options
bpf, arm64: Fix address emission with tag-based KASAN enabled
Linus Torvalds [Thu, 24 Oct 2024 23:43:50 +0000 (16:43 -0700)]
Merge tag 'net-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfiler, xfrm and bluetooth.
Oddly this includes a fix for a posix clock regression; in our
previous PR we included a change there as a pre-requisite for
networking one. That fix proved to be buggy and requires the follow-up
included here. Thomas suggested we should send it, given we sent the
buggy patch.
Current release - regressions:
- posix-clock: Fix unbalanced locking in pc_clock_settime()
- netfilter: fix typo causing some targets not to load on IPv6
Current release - new code bugs:
- xfrm: policy: remove last remnants of pernet inexact list
Previous releases - regressions:
- core: fix races in netdev_tx_sent_queue()/dev_watchdog()
- bluetooth: fix UAF on sco_sock_timeout
- eth: hv_netvsc: fix VF namespace also in synthetic NIC
NETDEV_REGISTER event
- eth: usbnet: fix name regression
- eth: be2net: fix potential memory leak in be_xmit()
- eth: plip: fix transmit path breakage
Previous releases - always broken:
- sched: deny mismatched skip_sw/skip_hw flags for actions created by
classifiers
- netfilter: bpf: must hold reference on net namespace
- eth: virtio_net: fix integer overflow in stats
- eth: bnxt_en: replace ptp_lock with irqsave variant
- eth: octeon_ep: add SKB allocation failures handling in
__octep_oq_process_rx()
Misc:
- MAINTAINERS: add Simon as an official reviewer"
* tag 'net-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (40 commits)
net: dsa: mv88e6xxx: support 4000ps cycle counter period
net: dsa: mv88e6xxx: read cycle counter period from hardware
net: dsa: mv88e6xxx: group cycle counter coefficients
net: usb: qmi_wwan: add Fibocom FG132 0x0112 composition
hv_netvsc: Fix VF namespace also in synthetic NIC NETDEV_REGISTER event
net: dsa: microchip: disable EEE for KSZ879x/KSZ877x/KSZ876x
Bluetooth: ISO: Fix UAF on iso_sock_timeout
Bluetooth: SCO: Fix UAF on sco_sock_timeout
Bluetooth: hci_core: Disable works on hci_unregister_dev
posix-clock: posix-clock: Fix unbalanced locking in pc_clock_settime()
r8169: avoid unsolicited interrupts
net: sched: use RCU read-side critical section in taprio_dump()
net: sched: fix use-after-free in taprio_change()
net/sched: act_api: deny mismatched skip_sw/skip_hw flags for actions created by classifiers
net: usb: usbnet: fix name regression
mlxsw: spectrum_router: fix xa_store() error checking
virtio_net: fix integer overflow in stats
net: fix races in netdev_tx_sent_queue()/dev_watchdog()
net: wwan: fix global oob in wwan_rtnl_policy
netfilter: xtables: fix typo causing some targets not to load on IPv6
...
Linus Torvalds [Thu, 24 Oct 2024 23:31:58 +0000 (16:31 -0700)]
Merge tag 'hid-for-linus-20241024' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
"Device-specific functionality quirks for Thinkpad X1 Gen3, Logitech
Bolt and some Goodix touchpads (Bartłomiej Maryńczak, Hans de Goede
and Kenneth Albanowski)"
* tag 'hid-for-linus-20241024' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: lenovo: Add support for Thinkpad X1 Tablet Gen 3 keyboard
HID: multitouch: Add quirk for Logitech Bolt receiver w/ Casa touchpad
HID: i2c-hid: Delayed i2c resume wakeup for 0x0d42 Goodix touchpad
This code simplification introduced significant regressions on servers
that do not remap inode numbers when exporting multiple underlying
filesystems with colliding inodes, as can be illustrated with simple
tmpfs exports in qemu with remapping disabled:
```
# host side
cd /tmp/linux-test
mkdir m1 m2
mount -t tmpfs tmpfs m1
mount -t tmpfs tmpfs m2
mkdir m1/dir m2/dir
echo foo > m1/dir/foo
echo bar > m2/dir/bar
# guest side
# started with -virtfs local,path=/tmp/linux-test,mount_tag=tmp,security_model=mapped-file
mount -t 9p -o trans=virtio,debug=1 tmp /mnt/t
ls /mnt/t/m1/dir
# foo
ls /mnt/t/m2/dir
# bar (works ok if directry isn't open)
# cd to keep first dir's inode alive
cd /mnt/t/m1/dir
ls /mnt/t/m2/dir
# foo (should be bar)
```
Other examples can be crafted with regular files with fscache enabled,
in which case I/Os just happen to the wrong file leading to
corruptions, or guest failing to boot with:
| VFS: Lookup of 'com.android.runtime' in 9p 9p would have caused loop
In theory, we'd want the servers to be smart enough and ensure they
never send us two different files with the same 'qid.path', but while
qemu has an option to remap that is recommended (and qemu prints a
warning if this case happens), there are many other servers which do
not (kvmtool, nfs-ganesha, probably diod...), we should at least ensure
we don't cause regressions on this:
- assume servers can't be trusted and operations that should get a 'new'
inode properly do so. commit d05dcfdf5e16 (" fs/9p: mitigate inode
collisions") attempted to do this, but v9fs_fid_iget_dotl() was not
called so some higher level of caching got in the way; this needs to be
fixed properly before we can re-apply the patches.
- if we ever want to really simplify this code, we will need to add some
negotiation with the server at mount time where the server could claim
they handle this properly, at which point we could optimize this out.
(but that might not be needed at all if we properly handle the 'new'
check?)
Linus Torvalds [Thu, 24 Oct 2024 21:17:34 +0000 (14:17 -0700)]
Merge tag 'loongarch-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Get correct cores_per_package for SMT systems, enable IRQ if do_ale()
triggered in irq-enabled context, and fix some bugs about vDSO, memory
managenent, hrtimer in KVM, etc"
* tag 'loongarch-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Mark hrtimer to expire in hard interrupt context
LoongArch: Make KASAN usable for variable cpu_vabits
LoongArch: Set initial pte entry with PAGE_GLOBAL for kernel space
LoongArch: Don't crash in stack_top() for tasks without vDSO
LoongArch: Set correct size for vDSO code mapping
LoongArch: Enable IRQ if do_ale() triggered in irq-enabled context
LoongArch: Get correct cores_per_package for SMT systems
LoongArch: Use "Exception return address" to comment ERA
Linus Torvalds [Thu, 24 Oct 2024 20:51:58 +0000 (13:51 -0700)]
Merge tag 'probes-fixes-v6.12-rc4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- objpool: Fix choosing allocation for percpu slots
Fixes to allocate objpool's percpu slots correctly according to the
GFP flag. It checks whether "any bit" in GFP_ATOMIC is set to choose
the vmalloc source, but it should check "all bits" in GFP_ATOMIC flag
is set, because GFP_ATOMIC is a combined flag.
If more than MAX_TRACE_ARGS are passed for creating a probe event,
the entries over MAX_TRACE_ARG in trace_arg array are not
initialized. Thus if the kernel accesses those entries, it crashes.
This rejects creating event if the number of arguments is over
MAX_TRACE_ARGS.
- tracing: Consider the NUL character when validating the event length
A strlen() is used when parsing the event name, and the original code
does not consider the terminal null byte. Thus it can pass the name
one byte longer than the buffer. This fixes to check it correctly.
* tag 'probes-fixes-v6.12-rc4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Consider the NULL character when validating the event length
tracing/probes: Fix MAX_TRACE_ARGS limit handling
objpool: fix choosing allocation for percpu slots
Linus Torvalds [Thu, 24 Oct 2024 20:04:15 +0000 (13:04 -0700)]
Merge tag 'for-6.12-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- mount option fixes:
- fix handling of compression mount options on remount
- reject rw remount in case there are options that don't work
in read-write mode (like rescue options)
- fix zone accounting of unusable space
- fix in-memory corruption when merging extent maps
- fix delalloc range locking for sector < page
- use more convenient default value of drop subtree threshold, clean
more subvolumes without the fallback to marking quotas inconsistent
- fix smatch warning about incorrect value passed to ERR_PTR
* tag 'for-6.12-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix passing 0 to ERR_PTR in btrfs_search_dir_index_item()
btrfs: reject ro->rw reconfiguration if there are hard ro requirements
btrfs: fix read corruption due to race with extent map merging
btrfs: fix the delalloc range locking if sector size < page size
btrfs: qgroup: set a more sane default value for subtree drop threshold
btrfs: clear force-compress on remount when compress mount option is given
btrfs: zoned: fix zone unusable accounting for freed reserved extent
Linus Torvalds [Thu, 24 Oct 2024 19:38:59 +0000 (12:38 -0700)]
Merge tag 'bcachefs-2024-10-22' of https://github.com/koverstreet/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"Lots of hotfixes:
- transaction restart injection has been shaking out a few things
- fix a data corruption in the buffered write path on -ENOSPC, found
by xfstests generic/299
- Some small show_options fixes
- Repair mismatches in inode hash type, seed: different snapshot
versions of an inode must have the same hash/type seed, used for
directory entries and xattrs. We were checking the hash seed, but
not the type, and a user contributed a filesystem where the hash
type on one inode had somehow been flipped; these fixes allow his
filesystem to repair.
Additionally, the hash type flip made some directory entries
invisible, which were then recreated by userspace; so the hash
check code now checks for duplicate non dangling dirents, and
renames one of them if necessary.
- Don't use wait_event_interruptible() in recovery: this fixes some
filesystems failing to mount with -ERESTARTSYS
- Workaround for kvmalloc not supporting > INT_MAX allocations,
causing an -ENOMEM when allocating the sorted array of journal
keys: this allows a 75 TB filesystem to mount
- Make sure bch_inode_unpacked.bi_snapshot is set in the old inode
compat path: this alllows Marcin's filesystem (in use since before
6.7) to repair and mount"
* tag 'bcachefs-2024-10-22' of https://github.com/koverstreet/bcachefs: (26 commits)
bcachefs: Set bch_inode_unpacked.bi_snapshot in old inode path
bcachefs: Mark more errors as AUTOFIX
bcachefs: Workaround for kvmalloc() not supporting > INT_MAX allocations
bcachefs: Don't use wait_event_interruptible() in recovery
bcachefs: Fix __bch2_fsck_err() warning
bcachefs: fsck: Improve hash_check_key()
bcachefs: bch2_hash_set_or_get_in_snapshot()
bcachefs: Repair mismatches in inode hash seed, type
bcachefs: Add hash seed, type to inode_to_text()
bcachefs: INODE_STR_HASH() for bch_inode_unpacked
bcachefs: Run in-kernel offline fsck without ratelimit errors
bcachefs: skip mount option handle for empty string.
bcachefs: fix incorrect show_options results
bcachefs: Fix data corruption on -ENOSPC in buffered write path
bcachefs: bch2_folio_reservation_get_partial() is now better behaved
bcachefs: fix disk reservation accounting in bch2_folio_reservation_get()
bcachefS: ec: fix data type on stripe deletion
bcachefs: Don't use commit_do() unnecessarily
bcachefs: handle restarts in bch2_bucket_io_time_reset()
bcachefs: fix restart handling in __bch2_resume_logged_op_finsert()
...
Nirmoy Das [Tue, 22 Oct 2024 10:35:55 +0000 (12:35 +0200)]
drm/xe: Don't restart parallel queues multiple times on GT reset
In case of parallel submissions multiple GuC id will point to the
same exec queue and on GT reset such exec queues will get restarted
multiple times which is not desirable.
v2: don't use exec_queue_enabled() which could race,
do the same for xe_guc_submit_stop (Matt B)
Shuicheng Lin [Thu, 17 Oct 2024 22:15:47 +0000 (22:15 +0000)]
drm/xe: Handle unreliable MMIO reads during forcewake
In some cases, when the driver attempts to read an MMIO register,
the hardware may return 0xFFFFFFFF. The current force wake path
code treats this as a valid response, as it only checks the BIT.
However, 0xFFFFFFFF should be considered an invalid value, indicating
a potential issue. To address this, we should add a log entry to
highlight this condition and return failure.
The force wake failure log level is changed from notice to err
to match the failure return value.
v2 (Matt Brost):
- set ret value (-EIO) to kick the error to upper layers
v3 (Rodrigo):
- add commit message for the log level promotion from notice to err
v4:
- update reviewed info
Badal Nilawar [Thu, 17 Oct 2024 11:14:10 +0000 (16:44 +0530)]
drm/xe/guc/ct: Flush g2h worker in case of g2h response timeout
In case if g2h worker doesn't get opportunity to within specified
timeout delay then flush the g2h worker explicitly.
v2:
- Describe change in the comment and add TODO (Matt B/John H)
- Add xe_gt_warn on fence done after G2H flush (John H)
v3:
- Updated the comment with root cause
- Clean up xe_gt_warn message (John H)
Shuicheng Lin [Tue, 15 Oct 2024 16:12:07 +0000 (16:12 +0000)]
drm/xe: Enlarge the invalidation timeout from 150 to 500
There are error messages like below that are occurring during stress
testing: "[ 31.004009] xe 0000:03:00.0: [drm] ERROR GT0: Global
invalidation timeout". Previously it was hitting this 3 out of 1000
executions of warm reboot. After raising it to 500, 1000 warm reboot
executions passed and it didn't fail.
Due to the way xe_mmio_wait32() is implemented, the timeout is able to
expire early when the register matches the expected value due to the
wait increments starting small. So, the larger timeout value should have
no effect during normal use cases.
v2 (Jonathan):
- rework the commit message
v3 (Lucas):
- add conclusive message for the fail rate and test case
v4:
- add suggested-by
The tiny patch set fixes the out-of-bound read problem when reading the
fdinfo of sock map link fd. And in order to spot such omission early for
the newly-added link type in the future, it also checks the validity of
the link->type and adds a WARN_ONCE() for missed invocation.
Please see individual patches for more details. And comments are always
welcome.
v3:
* patch #2: check and warn the validity of link->type instead of
adding a static assertion for bpf_link_type_strs array.
Hou Tao [Thu, 24 Oct 2024 01:35:58 +0000 (09:35 +0800)]
bpf: Check validity of link->type in bpf_link_show_fdinfo()
If a newly-added link type doesn't invoke BPF_LINK_TYPE(), accessing
bpf_link_type_strs[link->type] may result in an out-of-bounds access.
To spot such missed invocations early in the future, checking the
validity of link->type in bpf_link_show_fdinfo() and emitting a warning
when such invocations are missed.
Hou Tao [Thu, 24 Oct 2024 01:35:57 +0000 (09:35 +0800)]
bpf: Add the missing BPF_LINK_TYPE invocation for sockmap
There is an out-of-bounds read in bpf_link_show_fdinfo() for the sockmap
link fd. Fix it by adding the missing BPF_LINK_TYPE invocation for
sockmap link
Also add comments for bpf_link_type to prevent missing updates in the
future.
When the nominal_freq recorded by the kernel is equal to the lowest_freq,
and the frequency adjustment operation is triggered externally, there is
a logic error in cppc_perf_to_khz()/cppc_khz_to_perf(), resulting in perf
and khz conversion errors.
Fix this by adding a branch processing logic when nominal_freq is equal
to lowest_freq.
Dan Carpenter [Thu, 24 Oct 2024 08:07:15 +0000 (11:07 +0300)]
ACPI: PRM: Clean up guid type in struct prm_handler_info
Clang 19 prints a warning when we pass &th->guid to efi_pa_va_lookup():
drivers/acpi/prmt.c:156:29: error: passing 1-byte aligned argument to
4-byte aligned parameter 1 of 'efi_pa_va_lookup' may result in an
unaligned pointer access [-Werror,-Walign-mismatch]
156 | (void *)efi_pa_va_lookup(&th->guid, handler_info->handler_address);
| ^
The problem is that efi_pa_va_lookup() takes a efi_guid_t and &th->guid
is a regular guid_t. The difference between the two types is the
alignment. efi_guid_t is a typedef.
It's possible that this a bug in Clang 19. Even though the alignment of
&th->guid is not explicitly specified, it will still end up being aligned
at 4 or 8 bytes.
Anyway, as Ard points out, it's cleaner to change guid to efi_guid_t type
and that also makes the warning go away.
====================
net: dsa: mv88e6xxx: fix MV88E6393X PHC frequency on internal clock
The MV88E6393X family of switches can additionally run their cycle
counters using a 250MHz internal clock instead of the usual 125MHz
external clock [1].
The driver currently assumes all designs utilize that external clock,
but MikroTik's RB5009 uses the internal source - causing the PHC to be
seen running at 2x real time in userspace, making synchronization
with ptp4l impossible.
This series adds support for reading off the cycle counter frequency
known to the hardware in the TAI_CLOCK_PERIOD register and picking an
appropriate set of scaling coefficients instead of using a fixed set
for each switch family.
Patch 1 groups those cycle counter coefficients into a new structure to
make it easier to pass them around.
Patch 2 modifies PTP initialization to probe TAI_CLOCK_PERIOD and
use an appropriate set of coefficients.
Patch 3 adds support for 4000ps cycle counter periods.
Changes since v2 [2]:
- Patch 1: "net: dsa: mv88e6xxx: group cycle counter coefficients"
- Moved declaration of mv88e6xxx_cc_coeffs to avoid moving that in
Patch 2.
- Patch 2: "net: dsa: mv88e6xxx: read cycle counter period from hardware"
- Removed move of mv88e6xxx_cc_coeffs declaration.
- Patch 3: "net: dsa: mv88e6xxx: support 4000ps cycle counter periods"
- No change.
Shenghao Yang [Sun, 20 Oct 2024 06:38:30 +0000 (14:38 +0800)]
net: dsa: mv88e6xxx: support 4000ps cycle counter period
The MV88E6393X family of devices can run its cycle counter off
an internal 250MHz clock instead of an external 125MHz one.
Add support for this cycle counter period by adding another set
of coefficients and lowering the periodic cycle counter read interval
to compensate for faster overflows at the increased frequency.
Otherwise, the PHC runs at 2x real time in userspace and cannot be
synchronized.
Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family") Signed-off-by: Shenghao Yang <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
Shenghao Yang [Sun, 20 Oct 2024 06:38:29 +0000 (14:38 +0800)]
net: dsa: mv88e6xxx: read cycle counter period from hardware
Instead of relying on a fixed mapping of hardware family to cycle
counter frequency, pull this information from the
MV88E6XXX_TAI_CLOCK_PERIOD register.
This lets us support switches whose cycle counter frequencies depend on
board design.
Shenghao Yang [Sun, 20 Oct 2024 06:38:28 +0000 (14:38 +0800)]
net: dsa: mv88e6xxx: group cycle counter coefficients
Instead of having them as individual fields in ptp_ops, wrap the
coefficients in a separate struct so they can be referenced together.
Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family") Signed-off-by: Shenghao Yang <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
Haiyang Zhang [Fri, 18 Oct 2024 18:25:22 +0000 (11:25 -0700)]
hv_netvsc: Fix VF namespace also in synthetic NIC NETDEV_REGISTER event
The existing code moves VF to the same namespace as the synthetic NIC
during netvsc_register_vf(). But, if the synthetic device is moved to a
new namespace after the VF registration, the VF won't be moved together.
To make the behavior more consistent, add a namespace check for synthetic
NIC's NETDEV_REGISTER event (generated during its move), and move the VF
if it is not in the same namespace.
Tim Harvey [Fri, 18 Oct 2024 16:06:58 +0000 (09:06 -0700)]
net: dsa: microchip: disable EEE for KSZ879x/KSZ877x/KSZ876x
The well-known errata regarding EEE not being functional on various KSZ
switches has been refactored a few times. Recently the refactoring has
excluded several switches that the errata should also apply to.
Disable EEE for additional switches with this errata and provide
additional comments referring to the public errata document.
The original workaround for the errata was applied with a register
write to manually disable the EEE feature in MMD 7:60 which was being
applied for KSZ9477/KSZ9897/KSZ9567 switch ID's.
Then came commit 26dd2974c5b5 ("net: phy: micrel: Move KSZ9477 errata
fixes to PHY driver") and commit 6068e6d7ba50 ("net: dsa: microchip:
remove KSZ9477 PHY errata handling") which moved the errata from the
switch driver to the PHY driver but only for PHY_ID_KSZ9477 (PHY ID)
however that PHY code was dead code because an entry was never added
for PHY_ID_KSZ9477 via MODULE_DEVICE_TABLE.
This was apparently realized much later and commit 54a4e5c16382 ("net:
phy: micrel: add Microchip KSZ 9477 to the device table") added the
PHY_ID_KSZ9477 to the PHY driver but as the errata was only being
applied to PHY_ID_KSZ9477 it's not completely clear what switches
that relates to.
Later commit 6149db4997f5 ("net: phy: micrel: fix KSZ9477 PHY issues
after suspend/resume") breaks this again for all but KSZ9897 by only
applying the errata for that PHY ID.
Following that this was affected with commit 08c6d8bae48c("net: phy:
Provide Module 4 KSZ9477 errata (DS80000754C)") which removes
the blatant register write to MMD 7:60 and replaces it by
setting phydev->eee_broken_modes = -1 so that the generic phy-c45 code
disables EEE but this is only done for the KSZ9477_CHIP_ID (Switch ID).
Lastly commit 0411f73c13af ("net: dsa: microchip: disable EEE for
KSZ8567/KSZ9567/KSZ9896/KSZ9897.") adds some additional switches
that were missing to the errata due to the previous changes.
Paolo Abeni [Thu, 24 Oct 2024 10:30:22 +0000 (12:30 +0200)]
Merge tag 'for-net-2024-10-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_core: Disable works on hci_unregister_dev
- SCO: Fix UAF on sco_sock_timeout
- ISO: Fix UAF on iso_sock_timeout
* tag 'for-net-2024-10-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: ISO: Fix UAF on iso_sock_timeout
Bluetooth: SCO: Fix UAF on sco_sock_timeout
Bluetooth: hci_core: Disable works on hci_unregister_dev
====================
Niklas Cassel [Wed, 23 Oct 2024 10:55:41 +0000 (12:55 +0200)]
ata: libata: Set DID_TIME_OUT for commands that actually timed out
When ata_qc_complete() schedules a command for EH using
ata_qc_schedule_eh(), blk_abort_request() will be called, which leads to
req->q->mq_ops->timeout() / scsi_timeout() being called.
scsi_timeout(), if the LLDD has no abort handler (libata has no abort
handler), will set host byte to DID_TIME_OUT, and then call
scsi_eh_scmd_add() to add the command to EH.
Thus, when commands first enter libata's EH strategy_handler, all the
commands that have been added to EH will have DID_TIME_OUT set.
Commit e5dd410acb34 ("ata: libata: Clear DID_TIME_OUT for ATA PT commands
with sense data") clears this bogus DID_TIME_OUT flag for all commands
that reached libata's EH strategy_handler.
libata has its own flag (AC_ERR_TIMEOUT), that it sets for commands that
have not received a completion at the time of entering EH.
ata_eh_worth_retry() has no special handling for AC_ERR_TIMEOUT, so by
default timed out commands will get flag ATA_QCFLAG_RETRY set, and will be
retried after the port has been reset (ata_eh_link_autopsy() always
triggers a port reset if any command has AC_ERR_TIMEOUT set).
For a command that has ATA_QCFLAG_RETRY set, while also having an error
flag set (e.g. AC_ERR_TIMEOUT), ata_eh_finish() will not increment
scmd->allowed, so the command will at most be retried scmd->allowed number
of times (which by default is set to 3).
However, scsi_eh_flush_done_q() will only retry commands for which
scsi_noretry_cmd() returns false.
For a command that has DID_TIME_OUT set, while also having either the
FAILFAST flag set, or the command being a passthrough command,
scsi_noretry_cmd() will return true. Thus, such a command will never be
retried.
Thus, make sure that libata sets SCSI's DID_TIME_OUT flag for commands that
actually timed out (libata's AC_ERR_TIMEOUT flag), such that timed out
commands will once again not be retried if they are also a FAILFAST or
passthrough command.
1) Fix routing behavior that relies on L4 information
for xfrm encapsulated packets.
From Eyal Birger.
2) Remove leftovers of pernet policy_inexact lists.
From Florian Westphal.
3) Validate new SA's prefixlen when the selector family is
not set from userspace.
From Sabrina Dubroca.
4) Fix a kernel-infoleak when dumping an auth algorithm.
From Petr Vaganov.
Please pull or let me know if there are problems.
ipsec-2024-10-22
* tag 'ipsec-2024-10-22' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: fix one more kernel-infoleak in algo dumping
xfrm: validate new SA's prefixlen using SA family when sel.family is unset
xfrm: policy: remove last remnants of pernet inexact list
xfrm: respect ip protocols rules criteria when performing dst lookups
xfrm: extract dst lookup parameters into a struct
====================
Takashi Iwai [Thu, 24 Oct 2024 05:57:39 +0000 (07:57 +0200)]
Merge tag 'asoc-fix-v6.12-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.12
An uncomfortably large set of fixes due to me not getting round to
sending them for longer than I should due to travel and illness. This
is mostly smaller driver specific changes, but there are a couple of
generic changes:
- Bumping the minimal topology ABI we check for during validation, the
code had support for v4 removed previously but the update of the
define used for initial validation was missed.
- Fix the assumption that DAPM structs will be embedded in a component
which isn't true for card widgets when doing name comparisons, though
fortunately this is rarely triggered.
We've pulled in one Soundwire fix which was part of a larger series
fixing cleanup issues in on Intel Soundwire systems.
Andrii Nakryiko [Wed, 23 Oct 2024 16:19:16 +0000 (09:19 -0700)]
bpf: fix do_misc_fixups() for bpf_get_branch_snapshot()
We need `goto next_insn;` at the end of patching instead of `continue;`.
It currently works by accident by making verifier re-process patched
instructions.
Xinyu Zhang [Wed, 23 Oct 2024 21:15:19 +0000 (15:15 -0600)]
block: fix sanity checks in blk_rq_map_user_bvec
blk_rq_map_user_bvec contains a check bytes + bv->bv_len > nr_iter which
causes unnecessary failures in NVMe passthrough I/O, reproducible as
follows:
- register a 2 page, page-aligned buffer against a ring
- use that buffer to do a 1 page io_uring NVMe passthrough read
The second (i = 1) iteration of the loop in blk_rq_map_user_bvec will
then have nr_iter == 1 page, bytes == 1 page, bv->bv_len == 1 page, so
the check bytes + bv->bv_len > nr_iter will succeed, causing the I/O to
fail. This failure is unnecessary, as when the check succeeds, it means
we've checked the entire buffer that will be used by the request - i.e.
blk_rq_map_user_bvec should complete successfully. Therefore, terminate
the loop early and return successfully when the check bytes + bv->bv_len
> nr_iter succeeds.
While we're at it, also remove the check that all segments in the bvec
are single-page. While this seems to be true for all users of the
function, it doesn't appear to be required anywhere downstream.
PCI/pwrctl: Abandon QCom WCN probe on pre-pwrseq device-trees
Old device trees for some platforms already define wifi nodes for the WCN
family of chips since before power sequencing was added upstream.
These nodes don't consume the regulator outputs from the PMU, and if we
allow this driver to bind to one of such "incomplete" nodes, we'll see a
kernel log error about the infinite probe deferral.
Extend the driver by adding a platform data struct matched against the
compatible. This struct contains the pwrseq target string as well as a
validation function called right after entering probe().
For Qualcomm WCN models, check the existence of the regulator supply
property that indicates the DT is already using power sequencing and return
-ENODEV if it's not there, indicating to the driver model that the device
should not be bound to the pwrctl driver.
projects / linux.git / log