Mike Galbraith [Thu, 23 Jun 2016 06:45:42 +0000 (08:45 +0200)]
cpufreq: pcc-cpufreq: Fix doorbell.access_width
Commit 920de6ebfab8 (ACPICA: Hardware: Enhance
acpi_hw_validate_register() with access_width/bit_offset awareness)
apparently exposed a latent bug, doorbell.access_width is initialized
to 64, but per Lv Zheng, it should be 4, and indeed, making that
change does bring pcc-cpufreq back to life.
Fixes: 920de6ebfab8 (ACPICA: Hardware: Enhance acpi_hw_validate_register() with access_width/bit_offset awareness) Suggested-by: Lv Zheng <[email protected]> Signed-off-by: Mike Galbraith <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
Linus Torvalds [Thu, 23 Jun 2016 19:11:17 +0000 (12:11 -0700)]
locking: avoid passing around 'thread_info' in mutex debugging code
None of the code actually wants a thread_info, it all wants a
task_struct, and it's just converting back and forth between the two
("ti->task" to get the task_struct from the thread_info, and
"task_thread_info(task)" to go the other way).
Chandan Rajendra [Thu, 23 Jun 2016 09:46:44 +0000 (15:16 +0530)]
Btrfs: Force stripesize to the value of sectorsize
Btrfs code currently assumes stripesize to be same as
sectorsize. However Btrfs-progs (until commit df05c7ed455f519e6e15e46196392e4757257305) has been setting
btrfs_super_block->stripesize to a value of 4096.
This commit makes sure that the value of btrfs_super_block->stripesize
is a power of 2. Later, it unconditionally sets btrfs_root->stripesize
to sectorsize.
Wang Xiaoguang [Wed, 22 Jun 2016 01:57:01 +0000 (09:57 +0800)]
btrfs: fix disk_i_size update bug when fallocate() fails
When doing truncate operation, btrfs_setsize() will first call
truncate_setsize() to set new inode->i_size, but if later
btrfs_truncate() fails, btrfs_setsize() will call
"i_size_write(inode, BTRFS_I(inode)->disk_i_size)" to reset the
inmemory inode size, now bug occurs. It's because for truncate
case btrfs_ordered_update_i_size() directly uses inode->i_size
to update BTRFS_I(inode)->disk_i_size, indeed we should use the
"offset" argument to update disk_i_size. Here is the call graph:
==>btrfs_truncate()
====>btrfs_truncate_inode_items()
======>btrfs_ordered_update_i_size(inode, last_size, NULL);
Here btrfs_ordered_update_i_size()'s offset argument is last_size.
And below test case can reveal this bug:
dd if=/dev/zero of=fs.img bs=$((1024*1024)) count=100
dev=$(losetup --show -f fs.img)
mkdir -p /mnt/mntpoint
mkfs.btrfs -f $dev
mount $dev /mnt/mntpoint
cd /mnt/mntpoint
truncate --size 0 testfile
ls -l testfile
du -sh testfile
exit
In this case, truncate operation will fail for enospc reason and
"du -sh testfile" returns value greater than 0, but testfile's
size is 0, we need to reflect correct inode->i_size.
Liu Bo [Sat, 18 Jun 2016 02:16:21 +0000 (19:16 -0700)]
Btrfs: fix error handling in map_private_extent_buffer
map_private_extent_buffer() can return -EINVAL in two different cases,
1. when the requested contents span two pages if nodesize is larger
than pagesize,
2. when it detects something insane.
The 2nd one used to be only a WARN_ON(1), and we decided to return a error
to callers, but we didn't fix up all its callers, which will be
addressed by this patch.
Without this, btrfs may end up with 'general protection', ie.
reading invalid memory.
Wei Yongjun [Fri, 17 Jun 2016 17:20:40 +0000 (17:20 +0000)]
Btrfs: fix error return code in btrfs_init_test_fs()
Fix to return a negative error code from the kern_mount() error handling
case instead of 0(ret is set to 0 by register_filesystem), as done
elsewhere in this function.
Bart Van Assche [Thu, 23 Jun 2016 07:35:48 +0000 (09:35 +0200)]
IB/srpt: Reduce QP buffer size
The memory needed for the send and receive queues associated with
a QP is proportional to the max_sge parameter. The current value
of that parameter is such that with an mlx4 HCA the QP buffer size
is 8 MB. Since DMA is used for communication between HCA and CPU
that buffer either has to be allocated coherently or map_single()
must succeed for that buffer. Since large contiguous allocations
are fragile and since the maximum segment size for e.g. swiotlb
is 256 KB, reduce the max_sge parameter. This patch avoids that
the following text appears on the console after SRP logout and
relogin on a system equipped with multiple IB HCAs:
Shiraz Saleem [Tue, 14 Jun 2016 21:54:16 +0000 (16:54 -0500)]
i40iw: Correct CQ arming
CQ is armed for solicited events only, ignoring other notification
flags. Correct this by arming for next and arming for solicited
event if IB_CQ_SOLICITED is set. Also protect CQ shadow area update
with spinlock.
Dotan Barak [Wed, 22 Jun 2016 14:27:31 +0000 (17:27 +0300)]
IB/mlx4: Fix memory leak if QP creation failed
When RC, UC, or RAW QPs are created, a qp object is allocated (kzalloc).
If at a later point (in procedure create_qp_common) the qp creation fails,
this qp object must be freed.
Yishai Hadas [Wed, 22 Jun 2016 14:27:30 +0000 (17:27 +0300)]
IB/mlx4: Verify port number in flow steering create flow
In procedure mlx4_ib_create_flow, passing an invalid port number
will cause an out-of-bounds array access. Data passed to this procedure
can come from user-space. Therefore, need to validate port number
before proceeding onwards.
Note that we check against the number of physical ports declared at
the verbs (ib core) level; When bonding is active, the verbs level
sees one physical port, even though the low-level driver sees two ports.
Yishai Hadas [Wed, 22 Jun 2016 14:27:29 +0000 (17:27 +0300)]
IB/mlx4: Fix error flow when sending mads under SRIOV
Fix mad send error flow to prevent double freeing address handles,
and leaking tx_ring entries when SRIOV is active.
If ib_mad_post_send fails, the address handle pointer in the tx_ring entry
must be set to NULL (or there will be a double-free) and tx_tail must be
incremented (or there will be a leak of tx_ring entries).
The tx_ring is handled the same way in the send-completion handler.
Yishai Hadas [Wed, 22 Jun 2016 14:27:28 +0000 (17:27 +0300)]
IB/mlx4: Fix the SQ size of an RC QP
When calculating the required size of an RC QP send queue, leave
enough space for masked atomic operations, which require more space than
"regular" atomic operation.
Eli Cohen [Wed, 22 Jun 2016 14:27:26 +0000 (17:27 +0300)]
IB/mlx5: Fix post send fence logic
If the caller specified IB_SEND_FENCE in the send flags of the work
request and no previous work request stated that the successive one
should be fenced, the work request would be executed without a fence.
This could result in RDMA read or atomic operations failure due to a MR
being invalidated. Fix this by adding the mlx5 enumeration for fencing
RDMA/atomic operations and fix the logic to apply this.
Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Eli Cohen <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
Eli Cohen [Wed, 22 Jun 2016 14:27:24 +0000 (17:27 +0300)]
IB/core: Fix false search of the IB_SA_WELL_KNOWN_GUID
When virtualziation is supported, VFs may send SA MADs to a GID formed
by the concatenation of the subnet prefix with the
IB_SA_WELL_KNOWN_GUID. When a response is required, the current code
will search the local HCA's port for the received GID to figure out the
GID index of the entry containing this GID. However, since this is not a
real GID it will not be found and error will be printed.
We change the logic to check if the destination GID is this special GID
and avoid lookup in this case and use GID index 0.
Fixes: a0c1b2a35087 ('IB/core: Support accessing SA in virtualized environment') Signed-off-by: Eli Cohen <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
Alex Vesker [Wed, 22 Jun 2016 14:27:23 +0000 (17:27 +0300)]
IB/core: Fix RoCE v1 multicast join logic issue
During multicast join of RoCEv1, IGMP join state and max hop limit
were updated incorrectly. IGMP join should be sent and marked as
joined only on RoCEv2 after a successful join. Max hops should be
updated to the hop limit on RoCEv2 regardless of the join state.
Fixes: bee3c3c91865 ('IB/cma: Join and leave multicast groups...') Signed-off-by: Alex Vesker <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
Talat Batheesh [Wed, 22 Jun 2016 14:27:22 +0000 (17:27 +0300)]
IB/core: Fix no default GIDs when netdevice reregisters
Currently, when the netdevice returned by get_netdev is unregistered,
we delete all GIDs (including the default GIDs) and reset their
attributes. Therefore, when we re-register it, no default GIDs
will be assigned (as their "default GID") attribute will be reset.
Fixing this by keeping "default GID" attribute.
David Vrabel [Tue, 17 May 2016 14:54:50 +0000 (15:54 +0100)]
x86/xen: avoid m2p lookup when setting early page table entries
When page tables entries are set using xen_set_pte_init() during early
boot there is no page fault handler that could handle a fault when
performing an M2P lookup.
In 64 bit guests (usually dom0) early_ioremap() would fault in
xen_set_pte_init() because an M2P lookup faults because the MFN is in
MMIO space and not mapped in the M2P. This lookup is done to see if
the PFN in in the range used for the initial page table pages, so that
the PTE may be set as read-only.
The M2P lookup can be avoided by moving the check (and clear of RW)
earlier when the PFN is still available.
Pali Rohár [Fri, 17 Jun 2016 22:54:47 +0000 (00:54 +0200)]
hwmon: (dell-smm) Cache fan_type() calls and change fan detection
On more Dell machines (e.g. Dell Precision M3800) fan_type() call is too
expensive (CPU is too long in SMM mode) and cause kernel to hang. This is
bug in Dell SMM or BIOS.
This patch caches type for each fan (as it should not change) and changes
the way how fan presense is detected. First it try function fan_status()
as was before commit f989e55452c7 ("i8k: Add support for fan labels"). And
if that fails fallback to fan_type(). *_status() functions can fail in case
fan is not currently accessible (e.g. present on GPU which is currently
turned off).
Merge branch 'fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/mzx/devfreq into pm-devfreq
Pull devfreq fixes for v4.7 from MyungJoo Ham.
* 'fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/mzx/devfreq:
PM / devfreq: fix initialization of current frequency in last status
PM / devfreq: exynos-nocp: Remove incorrect IS_ERR() check
PM / devfreq: remove double put_device
PM / devfreq: fix double call put_device
PM / devfreq: fix duplicated kfree on devfreq pointer
PM / devfreq: devm_kzalloc to have dev pointer more precisely
Current overlap check is evaluating to false a case where a filter
field is fully contained (proper subset) of a r/w request. This
change applies classical overlap check instead to include all the
scenarios.
More specifically, for (Hilscher GmbH CIFX 50E-DP(M/S)) device driver
the logic is such that the entire confspace is read and written in 4
byte chunks. In this case as an example, CACHE_LINE_SIZE,
LATENCY_TIMER and PCI_BIST are arriving together in one call to
xen_pcibk_config_write() with offset == 0xc and size == 4. With the
exsisting overlap check the LATENCY_TIMER field (offset == 0xd, length
== 1) is fully contained in the write request and hence is excluded
from write, which is incorrect.
Juergen Gross [Thu, 23 Jun 2016 05:12:27 +0000 (07:12 +0200)]
x86/xen: fix upper bound of pmd loop in xen_cleanhighmap()
xen_cleanhighmap() is operating on level2_kernel_pgt only. The upper
bound of the loop setting non-kernel-image entries to zero should not
exceed the size of level2_kernel_pgt.
Ross Lagerwall [Tue, 10 May 2016 09:27:54 +0000 (10:27 +0100)]
xen/balloon: Fix declared-but-not-defined warning
Fix a declared-but-not-defined warning when building with
XEN_BALLOON_MEMORY_HOTPLUG=n. This fixes a regression introduced by
commit dfd74a1edfab ("xen/balloon: Fix crash when ballooning on x86 32
bit PAE").
Josef Bacik [Fri, 25 Mar 2016 17:26:00 +0000 (13:26 -0400)]
Btrfs: don't do nocow check unless we have to
Before we write into prealloc/nocow space we have to make sure that there are no
references to the extents we are writing into, which means checking the extent
tree and csum tree in the case of nocow. So we don't want to do the nocow dance
unless we can't reserve data space, since it's a serious drag on performance.
With the following sequence
Chris Mason [Wed, 27 Apr 2016 13:59:38 +0000 (09:59 -0400)]
btrfs: fix deadlock in delayed_ref_async_start
"Btrfs: track transid for delayed ref flushing" was deadlocking on
btrfs_attach_transaction because its not safe to call from the async
delayed ref start code. This commit brings back btrfs_join_transaction
instead and checks for a blocked commit.
Josef Bacik [Mon, 11 Apr 2016 21:37:40 +0000 (17:37 -0400)]
Btrfs: track transid for delayed ref flushing
Using the offwakecputime bpf script I noticed most of our time was spent waiting
on the delayed ref throttling. This is what is supposed to happen, but
sometimes the transaction can commit and then we're waiting for throttling that
doesn't matter anymore. So change this stuff to be a little smarter by tracking
the transid we were in when we initiated the throttling. If the transaction we
get is different then we can just bail out. This resulted in a 50% speedup in
my fs_mark test, and reduced the amount of time spent throttling by 60 seconds
over the entire run (which is about 30 minutes). Thanks,
Naveen N. Rao [Wed, 22 Jun 2016 16:25:01 +0000 (21:55 +0530)]
powerpc/bpf/jit: Disable classic BPF JIT on ppc64le
Classic BPF JIT was never ported completely to work on little endian
powerpc. However, it can be enabled and will crash the system when used.
As such, disable use of BPF JIT on ppc64le.
Fixes: 7c105b63bd98 ("powerpc: Add CONFIG_CPU_LITTLE_ENDIAN kernel config option.") Reported-by: Thadeu Lima de Souza Cascardo <[email protected]> Signed-off-by: Naveen N. Rao <[email protected]> Acked-by: Thadeu Lima de Souza Cascardo <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
Michael Ellerman [Mon, 20 Jun 2016 09:23:43 +0000 (19:23 +1000)]
powerpc: Fix faults caused by radix patching of SLB miss handler
As part of the Radix MMU support we added some feature sections in the
SLB miss handler. These are intended to catch the case that we
incorrectly take an SLB miss when Radix is enabled, and instead of
crashing weirdly they bail out to a well defined exit path and trigger
an oops.
However the way they were written meant the bailout case was enabled by
default until we did CPU feature patching.
On powermacs the early debug prints in setup_system() can cause an SLB
miss, which happens before code patching, and so the SLB miss handler
would incorrectly bailout and crash during boot.
Fix it by inverting the sense of the feature section, so that the code
which is in place at boot is correct for the hash case. Once we
determine we are using Radix - which will never happen on a powermac -
only then do we patch in the bailout case which unconditionally jumps.
Fixes: caca285e5ab4 ("powerpc/mm/radix: Use STD_MMU_64 to properly isolate hash related code") Reported-by: Denis Kirjanov <[email protected]> Tested-by: Denis Kirjanov <[email protected]> Reviewed-by: Aneesh Kumar K.V <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
During page migrations UBIFS might get confused
and the following assert triggers:
[ 213.480000] UBIFS assert failed in ubifs_set_page_dirty at 1451 (pid 436)
[ 213.490000] CPU: 0 PID: 436 Comm: drm-stress-test Not tainted 4.4.4-00176-geaa802524636-dirty #1008
[ 213.490000] Hardware name: Allwinner sun4i/sun5i Families
[ 213.490000] [<c0015e70>] (unwind_backtrace) from [<c0012cdc>] (show_stack+0x10/0x14)
[ 213.490000] [<c0012cdc>] (show_stack) from [<c02ad834>] (dump_stack+0x8c/0xa0)
[ 213.490000] [<c02ad834>] (dump_stack) from [<c0236ee8>] (ubifs_set_page_dirty+0x44/0x50)
[ 213.490000] [<c0236ee8>] (ubifs_set_page_dirty) from [<c00fa0bc>] (try_to_unmap_one+0x10c/0x3a8)
[ 213.490000] [<c00fa0bc>] (try_to_unmap_one) from [<c00fadb4>] (rmap_walk+0xb4/0x290)
[ 213.490000] [<c00fadb4>] (rmap_walk) from [<c00fb1bc>] (try_to_unmap+0x64/0x80)
[ 213.490000] [<c00fb1bc>] (try_to_unmap) from [<c010dc28>] (migrate_pages+0x328/0x7a0)
[ 213.490000] [<c010dc28>] (migrate_pages) from [<c00d0cb0>] (alloc_contig_range+0x168/0x2f4)
[ 213.490000] [<c00d0cb0>] (alloc_contig_range) from [<c010ec00>] (cma_alloc+0x170/0x2c0)
[ 213.490000] [<c010ec00>] (cma_alloc) from [<c001a958>] (__alloc_from_contiguous+0x38/0xd8)
[ 213.490000] [<c001a958>] (__alloc_from_contiguous) from [<c001ad44>] (__dma_alloc+0x23c/0x274)
[ 213.490000] [<c001ad44>] (__dma_alloc) from [<c001ae08>] (arm_dma_alloc+0x54/0x5c)
[ 213.490000] [<c001ae08>] (arm_dma_alloc) from [<c035cecc>] (drm_gem_cma_create+0xb8/0xf0)
[ 213.490000] [<c035cecc>] (drm_gem_cma_create) from [<c035cf20>] (drm_gem_cma_create_with_handle+0x1c/0xe8)
[ 213.490000] [<c035cf20>] (drm_gem_cma_create_with_handle) from [<c035d088>] (drm_gem_cma_dumb_create+0x3c/0x48)
[ 213.490000] [<c035d088>] (drm_gem_cma_dumb_create) from [<c0341ed8>] (drm_ioctl+0x12c/0x444)
[ 213.490000] [<c0341ed8>] (drm_ioctl) from [<c0121adc>] (do_vfs_ioctl+0x3f4/0x614)
[ 213.490000] [<c0121adc>] (do_vfs_ioctl) from [<c0121d30>] (SyS_ioctl+0x34/0x5c)
[ 213.490000] [<c0121d30>] (SyS_ioctl) from [<c000f2c0>] (ret_fast_syscall+0x0/0x34)
UBIFS is using PagePrivate() which can have different meanings across
filesystems. Therefore the generic page migration code cannot handle this
case correctly.
We have to implement our own migration function which basically does a
plain copy but also duplicates the page private flag.
UBIFS is not a block device filesystem and cannot use buffer_migrate_page().
recover_peb() was never power cut aware,
if a power cut happened right after writing the VID header
upon next attach UBI would blindly use the new partial written
PEB and all data from the old PEB is lost.
In order to make recover_peb() power cut aware, write the new
VID with a proper crc and copy_flag set such that the UBI attach
process will detect whether the new PEB is completely written
or not.
We cannot directly use ubi_eba_atomic_leb_change() since we'd
have to unlock the LEB which is facing a write error.
Linus Walleij [Thu, 16 Jun 2016 09:55:55 +0000 (11:55 +0200)]
gpio: make library immune to error pointers
Most functions that take a GPIO descriptor in need to check the
descriptor for IS_ERR(). We do this mostly in the VALIDATE_DESC()
macro except for the gpiod_to_irq() function which needs special
handling.
Linus Walleij [Wed, 15 Jun 2016 20:57:38 +0000 (22:57 +0200)]
gpio: make sure gpiod_to_irq() returns negative on NULL desc
commit 54d77198fdfbc4f0fe11b4252c1d9c97d51a3264
("gpio: bail out silently on NULL descriptors")
doesn't work for gpiod_to_irq(): drivers assume that NULL
descriptors will give negative IRQ numbers in return.
It has been pointed out that returning 0 is NO_IRQ and that
drivers should be amended to treat this as an error, but that
is for the longer term: now let us repair the semantics.
Linus Torvalds [Wed, 22 Jun 2016 21:11:24 +0000 (14:11 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull userns fix from Eric Biederman:
"This contains just a single small patch that fixes a tiny hole in the
logic of allowing unprivileged mounting of proc and sysfs.
In practice I don't think anyone is affected because having MNT_RDONLY
clear in mnt->mnt_flags but MS_RDONLY set in sb->s_flags is very weird
for a filesystem, and weirder for proc and sysfs. However if it
happens let's handle it correctly and then no one has to to worry
about this crazy case"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
mnt: Account for MS_RDONLY in fs_fully_visible
Linus Torvalds [Wed, 22 Jun 2016 17:13:25 +0000 (10:13 -0700)]
Merge tag 'gpio-v4.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"More GPIO fixes. Most prominent the gpiod_to_irq() fix brought to my
attention by Hans de Goede. The hardening patch is a consequence of
the reasoning around that bug.
- It was discovered that too many parts of the kernel does not
respect gpiod_to_irq() returning zero for an invalid IRQ. While
this gets fixed, we need to make it return negative errorcodes
again.
- Harden the library a bit when passed error pointers. It is a bug
to use these, but let's be helpful and warn the users.
- Fix an uninitialized spinlock in the 104-idi-48 driver"
* tag 'gpio-v4.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: make library immune to error pointers
gpio: make sure gpiod_to_irq() returns negative on NULL desc
gpio: 104-idi-48: Fix missing spin_lock_init for ack_lock
James Morse [Wed, 22 Jun 2016 09:06:13 +0000 (10:06 +0100)]
arm64: hibernate: Don't hibernate on systems with stuck CPUs
Hibernate relies on cpu hotplug to prevent secondary cores executing
the kernel text while it is being restored.
Add a call to cpus_are_stuck_in_kernel() to determine if there are
CPUs not counted by 'num_online_cpus()', and prevent hibernate in this
case.
Fixes: 82869ac57b5 ("arm64: kernel: Add support for hibernate/suspend-to-disk") Acked-by: Mark Rutland <[email protected]> Signed-off-by: James Morse <[email protected]> Signed-off-by: Will Deacon <[email protected]>
James Morse [Wed, 22 Jun 2016 09:06:12 +0000 (10:06 +0100)]
arm64: smp: Add function to determine if cpus are stuck in the kernel
kernel/smp.c has a fancy counter that keeps track of the number of CPUs
it marked as not-present and left in cpu_park_loop(). If there are any
CPUs spinning in here, features like kexec or hibernate may release them
by overwriting this memory.
This problem also occurs on machines using spin-tables to release
secondary cores.
After commit 44dbcc93ab67 ("arm64: Fix behavior of maxcpus=N")
we bring all known cpus into the secondary holding pen, meaning this
memory can't be re-used by kexec or hibernate.
Add a function cpus_are_stuck_in_kernel() to determine if either of these
cases have occurred.
Lukasz Luba [Tue, 31 May 2016 10:25:09 +0000 (11:25 +0100)]
PM / devfreq: fix initialization of current frequency in last status
Some systems need current frequency from last_status for calculation
but it is zeroed during initialization. When the device starts there is
no history, but we can assume that the last frequency was the
same as the initial frequency (which is also used in 'previous_freq').
The log shows the result of this misinterpreted value.
[ 2.042847] ... Failed to get voltage for frequency 0: -34
Smatch complains because platform_get_resource() returns NULL on error
and not an error pointer so the check is wrong. Julia Lawall pointed
out that normally we don't check these, because devm_ioremap_resource()
has a check for NULL.
MyungJoo Ham [Fri, 2 Oct 2015 03:39:23 +0000 (12:39 +0900)]
PM / devfreq: devm_kzalloc to have dev pointer more precisely
devm_kzalloc of devfreq's statistics data structure has been
using its parent device as the dev allocated for.
If a device's devfreq is disabled in run-time,
such allocated memory won't be freed.
Desginating more precisely with the devfreq device
pointer fixes the issue.
Lv Zheng [Tue, 21 Jun 2016 04:34:15 +0000 (12:34 +0800)]
ACPICA: Namespace: Fix deadlock triggered by MLC support in dynamic table loading
The new module-level code (MLC) approach invokes MLC on the per-table
basis, but the dynamic loading support of this is incorrect because
of the lock order:
acpi_ns_evaluate
acpi_ex_enter_intperter
acpi_ns_load_table (triggered by Load opcode)
acpi_ns_exec_module_code_list
acpi_ex_enter_intperter
The regression is introduced by the following commit:
This patch fixes this regression by unlocking the interpreter lock
before invoking MLC. However, the unlocking is done to the
acpi_ns_load_table(), in which the interpreter lock should be locked
by acpi_ns_parse_table() but it wasn't.
Shaokun Zhang [Tue, 21 Jun 2016 07:32:57 +0000 (15:32 +0800)]
arm64: mm: remove page_mapping check in __sync_icache_dcache
__sync_icache_dcache unconditionally skips the cache maintenance for
anonymous pages, under the assumption that flushing is only required in
the presence of D-side aliases [see 7249b79f6b4cc ("arm64: Do not flush
the D-cache for anonymous pages")].
Unfortunately, this breaks migration of anonymous pages holding
self-modifying code, where userspace cannot be reasonably expected to
reissue maintenance instructions in response to a migration.
This patch fixes the problem by removing the broken page_mapping(page)
check from the cache syncing code, otherwise we may end up fetching and
executing stale instructions from the PoU.
During a rollover, we mark the active ASID on each CPU as reserved, before
allocating a new ID for the task that caused the rollover. This means that
with N CPUs, we can only guarantee the new task to obtain a valid ASID if
we have at least N+1 ASIDs. Update this limit in the initcall check.
Note that this restriction was introduced by commit 8e648066 on the
arch/arm side, which disallow re-using the previously active ASID on the
local CPU, as it would introduce a TLB race.
In addition, we only dispose of NUM_USER_ASIDS-1, since ASID 0 is
reserved. Add this restriction as well.
This was kind of a difficult bug to track down. If you're using a
Haswell system running GNOME and you have fbc completely enabled and
working, playing videos can result in video artifacts. Steps to
reproduce:
- Run GNOME
- Ensure FBC is enabled and active
- Download a movie, I used the ogg version of Big Buck Bunny for this
- Run `gst-launch-1.0 filesrc location='some_movie.ogg' ! decodebin !
glimagesink` in a terminal
- Watch for about over a minute, you'll see small horizontal lines go
down the screen.
For the time being, disable FBC for Haswell by default.
Stefan Richter reported kernel freezes (no video artifacts) when fbc
is on. (E3-1245 v3 with HD P4600; openbox and some KDE and LXDE
applications, thread begins at https://lkml.org/lkml/2016/4/26/813).
We also got reports from Steven Honeyman on openbox+roxterm.
v2 (From Paulo):
- Add extra information to the commit message
- Add Fixes tag
- Rebase
Mika Kahola [Mon, 20 Jun 2016 08:10:26 +0000 (11:10 +0300)]
drm/i915: Revert DisplayPort fast link training feature
It has been found out that in some HW combination the DisplayPort
fast link training feature caused screen flickering. Let's revert
this feature for now until we can ensure that the feature works for
all platforms.
This is a manual revert of commits 5fa836a9d859 ("drm/i915: DP link
training optimization") and 4e96c97742f4 ("drm/i915: eDP link training
optimization").
Boris Brezillon [Fri, 3 Jun 2016 07:17:36 +0000 (09:17 +0200)]
drm: atmel-hlcdc: Fix OF graph parsing
atmel_hlcdc_create_outputs() iterates over OF graph nodes and releases
the node (using of_node_put()) after each iteration, which is wrong
since for_each_endpoint_of_node() is already taking care of that.
Move the of_node_put() call in the error path.
Signed-off-by: Boris Brezillon <[email protected]> Reviewed-by: Nicolas Ferre <[email protected]> Fixes: 17a8e03e7e97 ("drm: atmel-hlcdc: rework the output code to support drm bridges")
Nicolas Iooss [Sat, 18 Jun 2016 20:55:00 +0000 (22:55 +0200)]
drm/amdgpu: initialize amdgpu_cgs_acpi_eval_object result value
amdgpu_cgs_acpi_eval_object() returned the value of variable "result"
without initializing it first.
This bug has been found by compiling the kernel with clang. The
compiler complained:
drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c:972:14: error: variable
'result' is used uninitialized whenever 'for' loop exits because its
condition is false [-Werror,-Wsometimes-uninitialized]
for (i = 0; i < count; i++) {
^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c:1011:9: note: uninitialized
use occurs here
return result;
^~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c:972:14: note: remove the
condition if it is always true
for (i = 0; i < count; i++) {
^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c:864:12: note: initialize the
variable 'result' to silence this warning
int result;
^
= 0
David Miller [Sun, 19 Jun 2016 06:52:25 +0000 (23:52 -0700)]
PCI: Fix unaligned accesses in VC code
The save/restore buffers for VC state is first composed of a 2-byte control
register, then a bunch of 4-byte words.
This causes unaligned accesses which trap on platform such as sparc.
This is easy to fix by simply moving the buffer pointer forward by 4 bytes
instead of 2 after dealing with the control register. The length
adjustment needs to be changed likewise as well.
Linus Torvalds [Mon, 20 Jun 2016 17:41:51 +0000 (10:41 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
"A couple more of d_walk()/d_subdirs reordering fixes (stable fodder;
ought to solve that crap for good) and a fix for a brown paperbag bug
in d_alloc_parallel() (this cycle)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix idiotic braino in d_alloc_parallel()
autofs races
much milder d_walk() race
Linus Torvalds [Mon, 20 Jun 2016 17:35:48 +0000 (10:35 -0700)]
Merge tag 'trace-v4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Two fixes for the tracing system:
- When trace_printk() is used with a non constant format descriptor,
it adds a NULL pointer into the trace format section, and the code
isn't prepared to deal with it. This bug appeared by a change that
was added in v3.5.
- The ftracetest (selftests section) can't handle testing histograms
when histograms are not configured. Currently it shows that they
fail the test, when they should state that they are unsupported.
This bug was added in the 4.7 merge window with the addition of the
historgram code"
* tag 'trace-v4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftracetest: Fix hist unsupported result in hist selftests
tracing: Handle NULL formats in hold_module_trace_bprintk_format()
Linus Torvalds [Mon, 20 Jun 2016 17:18:58 +0000 (10:18 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"Two more bugs fixes for 4.7:
- a KVM regression introduced with the pgtable.c code split
- a perf issue with two hardware PMUs using a shared event context"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cpum_cf: use perf software context for hardware counters
KVM: s390/mm: Fix CMMA reset during reboot
Linus Torvalds [Mon, 20 Jun 2016 17:04:12 +0000 (10:04 -0700)]
Merge tag 'hwmon-for-linus-v4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Two stability fixes plus a security fix for the dell-smm driver"
* tag 'hwmon-for-linus-v4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (dell-smm) Disallow fan_type() calls on broken machines
hwmon: (dell-smm) Restrict fan control and serial number to CAP_SYS_ADMIN by default
hwmon: (dell-smm) Fail in ioctl I8K_BIOS_VERSION when bios version is not a number
Al Viro [Mon, 20 Jun 2016 05:35:59 +0000 (01:35 -0400)]
fix idiotic braino in d_alloc_parallel()
Check for d_unhashed() while searching in in-lookup hash was absolutely
wrong. Worse, it masked a deadlock on dget() done under bitlock that
nests inside ->d_lock. Thanks to J. R. Okajima for spotting it.
ftracetest: Fix hist unsupported result in hist selftests
When histograms are not configured in the kernel, the ftracetest histogram
selftests should return "unsupported" and not "Failed". To detect this, the
test scripts have:
FEATURE=`grep hist events/sched/sched_process_fork/trigger`
if [ -z "$FEATURE" ]; then
echo "hist trigger is not supported"
exit_unsupported
fi
The problem is that '-e' is in effect and any error will cause the program
to terminate. The grep for 'hist' fails, because it is not compiled it (thus
unsupported), but because grep has an error code for failing to find the
string, it causes the program to terminate, and is marked as a failed test.
Namhyung Kim recommended to test for the "hist" file located in
events/sched/sched_process_fork/hist instead, as it is more inline with the
other checks. As the hist file is only created if the histogram feature is
enabled, that is a valid check.
tracing: Handle NULL formats in hold_module_trace_bprintk_format()
If a task uses a non constant string for the format parameter in
trace_printk(), then the trace_printk_fmt variable is set to NULL. This
variable is then saved in the __trace_printk_fmt section.
The function hold_module_trace_bprintk_format() checks to see if duplicate
formats are used by modules, and reuses them if so (saves them to the list
if it is new). But this function calls lookup_format() that does a strcmp()
to the value (which is now NULL) and can cause a kernel oops.
This wasn't an issue till 3debb0a9ddb ("tracing: Fix trace_printk() to print
when not using bprintk()") which added "__used" to the trace_printk_fmt
variable, and before that, the kernel simply optimized it out (no NULL value
was saved).
The fix is simply to handle the NULL pointer in lookup_format() and have the
caller ignore the value if it was NULL.
So I _should_ have looked at other unserialized users of ->load_avg,
but alas. Luckily nikbor reported a similar /0 from task_h_load() which
instantly triggered recollection of this here problem.
Aside from the intermediate value hitting memory and causing problems,
there's another problem: the underflow detection relies on the signed
bit. This reduces the effective width of the variables, IOW its
effectively the same as having these variables be of signed type.
This patch changes to a different means of unsigned underflow
detection to not rely on the signed bit. This allows the variables to
use the 'full' unsigned range. And it does so with explicit LOAD -
STORE to ensure any intermediate value will never be visible in
memory, allowing these unserialized loads.
Note: GCC generates crap code for this, might warrant a look later.
Note2: I say 'full' above, if we end up at U*_MAX we'll still explode;
maybe we should do clamping on add too.
Linus Torvalds [Sun, 19 Jun 2016 17:05:14 +0000 (07:05 -1000)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull UDF fixes and a reiserfs fix from Jan Kara:
"A couple of udf fixes (most notably a bug in parsing UDF partitions
which led to inability to mount recent Windows installation media) and
a reiserfs fix for handling kstrdup failure"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
reiserfs: check kstrdup failure
udf: Use correct partition reference number for metadata
udf: Use IS_ERR when loading metadata mirror file entry
udf: Don't BUG on missing metadata partition descriptor
Linus Torvalds [Sun, 19 Jun 2016 06:36:17 +0000 (20:36 -1000)]
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Another batch of fixes for ARM SoC platforms. Most are smaller fixes.
Two areas that are worth pointing out are:
- OMAP had a handful of changes to voltage specs that caused a bit of
churn, most of volume of change in this branch is due to this.
- There are a couple of _rcuidle fixes from Paul that touch common
code and came in through the OMAP tree since they were the ones who
saw the problems.
The rest is smaller changes across a handful of platforms"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (36 commits)
ARM: dts: STi: stih407-family: Disable reserved-memory co-processor nodes
ARM: dts: am437x-sk-evm: Reduce i2c0 bus speed for tps65218
ARM: OMAP2+: timer: add probe for clocksources
ARM: OMAP1: fix ams-delta FIQ handler to work with sparse IRQ
memory: omap-gpmc: Fix omap gpmc EXTRADELAY timing
arm: Use _rcuidle for smp_cross_call() tracepoints
MAINTAINERS: Add myself as reviewer of ARM FSL/NXP
ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_mem_ret
ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_logic_ret
ARM: OMAP: DRA7: powerdomain data: Set L3init and L4per to ON
ARM: imx6ul: Fix Micrel PHY mask
ARM: OMAP2+: Select OMAP_INTERCONNECT for SOC_AM43XX
ARM: dts: DRA74x: fix DSS PLL2 addresses
ARM: OMAP2: Enable Errata 430973 for OMAP3
ARM: dts: socfpga: Add missing PHY phandle
ARM: dts: exynos: Fix port nodes names for Exynos5420 Peach Pit board
ARM: dts: exynos: Fix port nodes names for Exynos5250 Snow board
ARM: dts: sun6i: yones-toptech-bs1078-v2: Drop constraints on dc1sw regulator
ARM: dts: sun6i: primo81: Drop constraints on dc1sw regulator
ARM: dts: sunxi: Add OLinuXino Lime2 eMMC to the Makefile
...
Olof Johansson [Sun, 19 Jun 2016 05:57:48 +0000 (22:57 -0700)]
Merge tag 'omap-for-v4.7/fixes-powedomain' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Fixes for omaps for v4.7-rc cycle:
- Fix dra7 for hardware issues limiting L4Per and L3init power domains
to on state. Without this the devices may not work correctly after
some time of use because of asymmetric aging. And related to this,
let's also remove the unusable states.
- Always select omap interconnect for am43x as otherwise the am43x
only configurations will not boot properly. This can happen easily
for any product kernels that leave out other SoCs to save memory.
- Fix DSS PLL2 addresses that have gone unused for now
- Select erratum 430973 for omap3, this is now safe to do and can
save quite a bit of debugging time for people who may have left
it out.
* tag 'omap-for-v4.7/fixes-powedomain' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_mem_ret
ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_logic_ret
ARM: OMAP: DRA7: powerdomain data: Set L3init and L4per to ON
ARM: OMAP2+: Select OMAP_INTERCONNECT for SOC_AM43XX
ARM: dts: DRA74x: fix DSS PLL2 addresses
ARM: OMAP2: Enable Errata 430973 for OMAP3
+ Linux 4.7-rc2
drm/exynos: don't use HW trigger for Exynos5420/5422/5800
Commit a6f75aa161c5 ("drm/exynos: fimd: add HW trigger support") added
hardware trigger support to the FIMD controller driver. But this broke
the display in at least the Exynos5800 Peach Pi Chromebook.
So until the issue is fixed, avoid using HW trigger for the Exynos5420
based boards and use SW trigger as it was before the mentioned commit.
drm/exynos: fimd: don't set .has_hw_trigger in s3c6400 driver data
The field value is only checked in fimd_setup_trigger() if .trg_type is
I80_HW_TRG so there's no point in setting this field for the s3c6400 if
is never going to be used since .trg_type is not set.
Yakir Yang [Wed, 8 Jun 2016 14:13:27 +0000 (10:13 -0400)]
drm/exynos: dp: Fix NULL pointer dereference due uninitialized connector
Commit 3424e3a4f844 ("drm: bridge: analogix/dp: split exynos dp driver to
bridge directory") split the Exynos DP core driver into a core driver and
a bridge driver for the Analogix chip since that is also used by Rockchip.
But the change introduced a regression causing a NULL pointer dereference
when trying to access an uninitialized connector in the driver .get_modes:
Fix this by instead of having a connector struct for both the Exynos and
Analogix drivers, just use the connector initialized in the bridge driver.
Fixes: 3424e3a4f844 ("drm: bridge: analogix/dp: split exynos dp driver to bridge directory") Reported-by: Marc Zyngier <[email protected]> Signed-off-by: Yakir Yang <[email protected]> Tested-by: Marc Zyngier <[email protected]> Signed-off-by: Inki Dae <[email protected]>
Olof Johansson [Sun, 19 Jun 2016 05:21:52 +0000 (22:21 -0700)]
Merge tag 'fixes-rcu-fiq-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Fixes for omaps for v4.7-rc cycle:
- Two boot warning fixes from the RCU tree that should have gotten
merged several weeks ago already but did not because of issues
with who merges them. Paul has now split the RCU warning fixes into
sets for various maintainers.
- Fix PM for omap3 boards using timer12 and gptimer, like the
original beagleboard
- Fix hangs on am437x-sk-evm by lowering the I2C bus speed
* tag 'fixes-rcu-fiq-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am437x-sk-evm: Reduce i2c0 bus speed for tps65218
ARM: OMAP2+: timer: add probe for clocksources
ARM: OMAP1: fix ams-delta FIQ handler to work with sparse IRQ
arm: Use _rcuidle for smp_cross_call() tracepoints
arm: Use _rcuidle tracepoint to allow use from idle
When booting with a compressed kernel, we need to be careful how we
populate memory close to DDR start. AUTO_ZRELADDR is enabled by default
in multi-arch enabled configurations, which place some restrictions on
where the kernel is placed and where it will be uncompressed to on boot.
AUTO_ZRELADDR takes the decompressor code's start address and masks out
the bottom 28 bits to obtain an address to uncompress the kernel to
(thus a load address of 0x42000000 means that the kernel will be
uncompressed to 0x40000000 i.e. DDR START on this platform).
Even changing the load address to after the co-processor's shared memory
won't render a booting platform, since the AUTO_ZRELADDR algorithm still
ensures the kernel is uncompressed into memory shared with the first
co-processor (0x40000000).
Another option would be to move loading to 0x4A000000, since this will
mean the decompressor will decompress the kernel to 0x48000000. However,
this would mean a large chunk (0x44000000 => 0x48000000 (64MB)) of
memory would essentially be wasted for no good reason.
Until we can work with ST to find a suitable memory location to
relocate co-processor shared memory, let's disable the shared memory
nodes. This will ensure a working platform in the mean time.
NB: The more observant of you will notice that we're leaving the DMU
shared memory node enabled; this is because a) it is the only one in
active use at the time of this writing and b) it is not affected by
the current default behaviour which is causing issues.
Fixes: fe135c6 (ARM: dts: STiH407: Move over to using the 'reserved-memory' API for obtaining DMA memory) Signed-off-by: Lee Jones <[email protected]>
Reviewed-by Peter Griffin <[email protected]> Signed-off-by: Maxime Coquelin <[email protected]> Signed-off-by: Olof Johansson <[email protected]>
projects / linux.git / log