Paolo Bonzini [Wed, 31 Mar 2021 10:28:01 +0000 (06:28 -0400)]
KVM: SVM: ensure that EFER.SVME is set when running nested guest or on nested vmexit
Fixing nested_vmcb_check_save to avoid all TOC/TOU races
is a bit harder in released kernels, so do the bare minimum
by avoiding that EFER.SVME is cleared. This is problematic
because svm_set_efer frees the data structures for nested
virtualization if EFER.SVME is cleared.
Also check that EFER.SVME remains set after a nested vmexit;
clearing it could happen if the bit is zero in the save area
that is passed to KVM_SET_NESTED_STATE (the save area of the
nested state corresponds to the nested hypervisor's state
and is restored on the next nested vmexit).
Cc: [email protected] Fixes: 2fcf4876ada ("KVM: nSVM: implement on demand allocation of the nested state") Signed-off-by: Paolo Bonzini <[email protected]>
Paolo Bonzini [Wed, 31 Mar 2021 10:24:43 +0000 (06:24 -0400)]
KVM: SVM: load control fields from VMCB12 before checking them
Avoid races between check and use of the nested VMCB controls. This
for example ensures that the VMRUN intercept is always reflected to the
nested hypervisor, instead of being processed by the host. Without this
patch, it is possible to end up with svm->nested.hsave pointing to
the MSR permission bitmap for nested guests.
Xℹ Ruoyao [Tue, 30 Mar 2021 15:33:34 +0000 (23:33 +0800)]
drm/amdgpu: check alignment on CPU page for bo map
The page table of AMDGPU requires an alignment to CPU page so we should
check ioctl parameters for it. Return -EINVAL if some parameter is
unaligned to CPU page, instead of corrupt the page table sliently.
Huacai Chen [Tue, 30 Mar 2021 15:33:33 +0000 (23:33 +0800)]
drm/amdgpu: Set a suitable dev_info.gart_page_size
In Mesa, dev_info.gart_page_size is used for alignment and it was
set to AMDGPU_GPU_PAGE_SIZE(4KB). However, the page table of AMDGPU
driver requires an alignment on CPU pages. So, for non-4KB page system,
gart_page_size should be max_t(u32, PAGE_SIZE, AMDGPU_GPU_PAGE_SIZE).
Alex Deucher [Fri, 26 Mar 2021 20:56:07 +0000 (16:56 -0400)]
drm/amdgpu/vangogh: don't check for dpm in is_dpm_running when in suspend
Do the same thing we do for Renoir. We can check, but since
the sbios has started DPM, it will always return true which
causes the driver to skip some of the SMU init when it shouldn't.
Qu Huang [Thu, 28 Jan 2021 12:14:25 +0000 (20:14 +0800)]
drm/amdkfd: dqm fence memory corruption
Amdgpu driver uses 4-byte data type as DQM fence memory,
and transmits GPU address of fence memory to microcode
through query status PM4 message. However, query status
PM4 message definition and microcode processing are all
processed according to 8 bytes. Fence memory only allocates
4 bytes of memory, but microcode does write 8 bytes of memory,
so there is a memory corruption.
Changes since v1:
* Change dqm->fence_addr as a u64 pointer to fix this issue,
also fix up query_status and amdkfd_fence_wait_timeout function
uses 64 bit fence value to make them consistent.
Yufen Yu [Wed, 31 Mar 2021 11:53:59 +0000 (07:53 -0400)]
block: only update parent bi_status when bio fail
For multiple split bios, if one of the bio is fail, the whole
should return error to application. But we found there is a race
between bio_integrity_verify_fn and bio complete, which return
io success to application after one of the bio fail. The race as
following:
The bio has been split as two: split and parent. When split
bio completed, it depends on kworker to do endio, while
bio_integrity_verify_fn have been interrupted by parent bio
complete irq handler. Then, parent bio->bi_status which have
been set in irq handler will overwrite by kworker.
In fact, even without the above race, we also need to conside
the concurrency beteen mulitple split bio complete and update
the same parent bi_status. Normally, multiple split bios will
be issued to the same hctx and complete from the same irq
vector. But if we have updated queue map between multiple split
bios, these bios may complete on different hw queue and different
irq vector. Then the concurrency update parent bi_status may
cause the final status error.
Linus Torvalds [Wed, 31 Mar 2021 17:14:55 +0000 (10:14 -0700)]
Merge tag 'trace-v5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull ftrace fix from Steven Rostedt:
"Add check of order < 0 before calling free_pages()
The function addresses that are traced by ftrace are stored in pages,
and the size is held in a variable. If there's some error in creating
them, the allocate ones will be freed. In this case, it is possible
that the order of pages to be freed may end up being negative due to a
size of zero passed to get_count_order(), and then that negative
number will cause free_pages() to free a very large section.
Make sure that does not happen"
* tag 'trace-v5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Check if pages were allocated before calling free_pages()
syzbot is reporting NULL pointer dereference at reiserfs_security_init()
[1], for commit ab17c4f02156c4f7 ("reiserfs: fixup xattr_root caching")
is assuming that REISERFS_SB(s)->xattr_root != NULL in
reiserfs_xattr_jcreate_nblocks() despite that commit made
REISERFS_SB(sb)->priv_root != NULL && REISERFS_SB(s)->xattr_root == NULL
case possible.
I guess that commit 6cb4aff0a77cc0e6 ("reiserfs: fix oops while creating
privroot with selinux enabled") wanted to check xattr_root != NULL
before reiserfs_xattr_jcreate_nblocks(), for the changelog is talking
about the xattr root.
The issue is that while creating the privroot during mount
reiserfs_security_init calls reiserfs_xattr_jcreate_nblocks which
dereferences the xattr root. The xattr root doesn't exist, so we get
an oops.
Therefore, update reiserfs_xattrs_initialized() to check both the
privroot and the xattr root.
Jens Axboe [Mon, 29 Mar 2021 12:52:44 +0000 (06:52 -0600)]
io_uring: drop sqd lock before handling signals for SQPOLL
Don't call into get_signal() with the sqd mutex held, it'll fail if we're
freezing the task and we'll get complaints on locks still being held:
====================================
WARNING: iou-sqp-8386/8387 still has locks held!
5.12.0-rc4-syzkaller #0 Not tainted
------------------------------------
1 lock held by iou-sqp-8386/8387:
#0: ffff88801e1d2470 (&sqd->lock){+.+.}-{3:3}, at: io_sq_thread+0x24c/0x13a0 fs/io_uring.c:6731
stack backtrace:
CPU: 1 PID: 8387 Comm: iou-sqp-8386 Not tainted 5.12.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x141/0x1d7 lib/dump_stack.c:120
try_to_freeze include/linux/freezer.h:66 [inline]
get_signal+0x171a/0x2150 kernel/signal.c:2576
io_sq_thread+0x8d2/0x13a0 fs/io_uring.c:6748
Fold the get_signal() case in with the parking checks, as we need to drop
the lock in both cases, and since we need to be checking for parking when
juggling the lock anyway.
Reported-by: [email protected] Fixes: dbe1bdbb39db ("io_uring: handle signals for IO threads like a normal thread") Signed-off-by: Jens Axboe <[email protected]>
Hans de Goede [Tue, 30 Mar 2021 18:49:32 +0000 (20:49 +0200)]
ACPI: scan: Fix _STA getting called on devices with unmet dependencies
Commit 71da201f38df ("ACPI: scan: Defer enumeration of devices with
_DEP lists") dropped the following 2 lines from acpi_init_device_object():
/* Assume there are unmet deps until acpi_device_dep_initialize() runs */
device->dep_unmet = 1;
Leaving the initial value of dep_unmet at the 0 from the kzalloc(). This
causes the acpi_bus_get_status() call in acpi_add_single_object() to
actually call _STA, even though there maybe unmet deps, leading to errors
like these:
[ 0.123579] ACPI Error: No handler for Region [ECRM] (00000000ba9edc4c)
[GenericSerialBus] (20170831/evregion-166)
[ 0.123601] ACPI Error: Region GenericSerialBus (ID=9) has no handler
(20170831/exfldio-299)
[ 0.123618] ACPI Error: Method parse/execution failed
\_SB.I2C1.BAT1._STA, AE_NOT_EXIST (20170831/psparse-550)
Fix this by re-adding the dep_unmet = 1 initialization to
acpi_init_device_object() and modifying acpi_bus_check_add() to make sure
that dep_unmet always gets setup there, overriding the initial 1 value.
This re-fixes the issue initially fixed by
commit 63347db0affa ("ACPI / scan: Use acpi_bus_get_status() to initialize
ACPI_TYPE_DEVICE devs"), which introduced the removed
"device->dep_unmet = 1;" statement.
This issue was noticed; and the fix tested on a Dell Venue 10 Pro 5055.
Fixes: 71da201f38df ("ACPI: scan: Defer enumeration of devices with _DEP lists") Suggested-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Cc: 5.11+ <[email protected]> # 5.11+ Signed-off-by: Rafael J. Wysocki <[email protected]>
Linus Torvalds [Tue, 30 Mar 2021 17:54:22 +0000 (10:54 -0700)]
Merge tag 's390-5.12-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- fix incorrect initialization and update of vdso data pages, which
results in incorrect tod clock steering, and that
clock_gettime(CLOCK_MONOTONIC_RAW, ...) returns incorrect values.
- update MAINTAINERS for s390 vfio drivers
* tag 's390-5.12-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
MAINTAINERS: add backups for s390 vfio drivers
s390/vdso: fix initializing and updating of vdso_data
s390/vdso: fix tod_steering_delta type
s390/vdso: copy tod_steering_delta value to vdso_data page
Thierry Reding [Fri, 19 Mar 2021 13:17:22 +0000 (14:17 +0100)]
drm/tegra: sor: Grab runtime PM reference across reset
The SOR resets are exclusively shared with the SOR power domain. This
means that exclusive access can only be granted temporarily and in order
for that to work, a rigorous sequence must be observed. To ensure that a
single consumer gets exclusive access to a reset, each consumer must
implement a rigorous protocol using the reset_control_acquire() and
reset_control_release() functions.
However, these functions alone don't provide any guarantees at the
system level. Drivers need to ensure that the only a single consumer has
access to the reset at the same time. In order for the SOR to be able to
exclusively access its reset, it must therefore ensure that the SOR
power domain is not powered off by holding on to a runtime PM reference
to that power domain across the reset assert/deassert operation.
This used to work fine by accident, but was revealed when recently more
devices started to rely on the SOR power domain.
Fixes: 11c632e1cfd3 ("drm/tegra: sor: Implement acquire/release for reset") Reported-by: Jonathan Hunter <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
Commit 4bba4c4bb09a added tools/include/linux/compiler_types.h which
includes linux/compiler-gcc.h. Unfortunately, we had our own (empty)
compiler_types.h which overrode the one added by that commit, and
so we lost the definition of __must_be_array(). Removing our empty
compiler_types.h fixes the problem and reduces our divergence from the
rest of the tools.
Splitting an order-4 entry into order-2 entries would leave the array
containing pointers to 000040008000c000 instead of 000044448888cccc.
This is a one-character fix, but enhance the test suite to check this
case.
Thierry Reding [Fri, 19 Mar 2021 07:06:37 +0000 (08:06 +0100)]
drm/tegra: dc: Restore coupling of display controllers
Coupling of display controllers used to rely on runtime PM to take the
companion controller out of reset. Commit fd67e9c6ed5a ("drm/tegra: Do
not implement runtime PM") accidentally broke this when runtime PM was
removed.
Restore this functionality by reusing the hierarchical host1x client
suspend/resume infrastructure that's similar to runtime PM and which
perfectly fits this use-case.
Dmitry Osipenko [Tue, 2 Mar 2021 13:15:06 +0000 (16:15 +0300)]
drm/tegra: dc: Don't set PLL clock to 0Hz
RGB output doesn't allow to change parent clock rate of the display and
PCLK rate is set to 0Hz in this case. The tegra_dc_commit_state() shall
not set the display clock to 0Hz since this change propagates to the
parent clock. The DISP clock is defined as a NODIV clock by the tegra-clk
driver and all NODIV clocks use the CLK_SET_RATE_PARENT flag.
This bug stayed unnoticed because by default PLLP is used as the parent
clock for the display controller and PLLP silently skips the erroneous 0Hz
rate changes because it always has active child clocks that don't permit
rate changes. The PLLP isn't acceptable for some devices that we want to
upstream (like Samsung Galaxy Tab and ASUS TF700T) due to a display panel
clock rate requirements that can't be fulfilled by using PLLP and then the
bug pops up in this case since parent clock is set to 0Hz, killing the
display output.
Don't touch DC clock if pclk=0 in order to fix the problem.
KVM: x86/mmu: Don't allow TDP MMU to yield when recovering NX pages
Prevent the TDP MMU from yielding when zapping a gfn range during NX
page recovery. If a flush is pending from a previous invocation of the
zapping helper, either in the TDP MMU or the legacy MMU, but the TDP MMU
has not accumulated a flush for the current invocation, then yielding
will release mmu_lock with stale TLB entries.
That being said, this isn't technically a bug fix in the current code, as
the TDP MMU will never yield in this case. tdp_mmu_iter_cond_resched()
will yield if and only if it has made forward progress, as defined by the
current gfn vs. the last yielded (or starting) gfn. Because zapping a
single shadow page is guaranteed to (a) find that page and (b) step
sideways at the level of the shadow page, the TDP iter will break its loop
before getting a chance to yield.
But that is all very, very subtle, and will break at the slightest sneeze,
e.g. zapping while holding mmu_lock for read would break as the TDP MMU
wouldn't be guaranteed to see the present shadow page, and thus could step
sideways at a lower level.
KVM: x86/mmu: Ensure TLBs are flushed for TDP MMU during NX zapping
Honor the "flush needed" return from kvm_tdp_mmu_zap_gfn_range(), which
does the flush itself if and only if it yields (which it will never do in
this particular scenario), and otherwise expects the caller to do the
flush. If pages are zapped from the TDP MMU but not the legacy MMU, then
no flush will occur.
KVM: x86/mmu: Ensure TLBs are flushed when yielding during GFN range zap
When flushing a range of GFNs across multiple roots, ensure any pending
flush from a previous root is honored before yielding while walking the
tables of the current root.
Note, kvm_tdp_mmu_zap_gfn_range() now intentionally overwrites its local
"flush" with the result to avoid redundant flushes. zap_gfn_range()
preserves and return the incoming "flush", unless of course the flush was
performed prior to yielding and no new flush was triggered.
Vitaly Kuznetsov [Tue, 23 Mar 2021 08:45:15 +0000 (09:45 +0100)]
KVM: x86/vPMU: Forbid writing to MSR_F15H_PERF MSRs when guest doesn't have X86_FEATURE_PERFCTR_CORE
MSR_F15H_PERF_CTL0-5, MSR_F15H_PERF_CTR0-5 MSRs are only available when
X86_FEATURE_PERFCTR_CORE CPUID bit was exposed to the guest. KVM, however,
allows these MSRs unconditionally because kvm_pmu_is_valid_msr() ->
amd_msr_idx_to_pmc() check always passes and because kvm_pmu_set_msr() ->
amd_pmu_set_msr() doesn't fail.
In case of a counter (CTRn), no big harm is done as we only increase
internal PMC's value but in case of an eventsel (CTLn), we go deep into
perf internals with a non-existing counter.
Note, kvm_get_msr_common() just returns '0' when these MSRs don't exist
and this also seems to contradict architectural behavior which is #GP
(I did check one old Opteron host) but changing this status quo is a bit
scarier.
Dongli Zhang [Fri, 26 Mar 2021 07:03:34 +0000 (00:03 -0700)]
KVM: x86: remove unused declaration of kvm_write_tsc()
kvm_write_tsc() was renamed and made static since commit 0c899c25d754
("KVM: x86: do not attempt TSC synchronization on guest writes"). Remove
its unused declaration.
Stefan Raspl [Thu, 25 Mar 2021 12:29:49 +0000 (13:29 +0100)]
tools/kvm_stat: Add restart delay
If this service is enabled and the system rebooted, Systemd's initial
attempt to start this unit file may fail in case the kvm module is not
loaded. Since we did not specify a delay for the retries, Systemd
restarts with a minimum delay a number of times before giving up and
disabling the service. Which means a subsequent kvm module load will
have kvm running without monitoring.
Adding a delay to fix this.
Ilya Lipnitskiy [Tue, 30 Mar 2021 04:42:08 +0000 (21:42 -0700)]
mm: fix race by making init_zero_pfn() early_initcall
There are code paths that rely on zero_pfn to be fully initialized
before core_initcall. For example, wq_sysfs_init() is a core_initcall
function that eventually results in a call to kernel_execve, which
causes a page fault with a subsequent mmput. If zero_pfn is not
initialized by then it may not get cleaned up properly and result in an
error:
BUG: Bad rss-counter state mm:(ptrval) type:MM_ANONPAGES val:1
Here is an analysis of the race as seen on a MIPS device. On this
particular MT7621 device (Ubiquiti ER-X), zero_pfn is PFN 0 until
initialized, at which point it becomes PFN 5120:
1. wq_sysfs_init calls into kobject_uevent_env at core_initcall:
kobject_uevent_env+0x7e4/0x7ec
kset_register+0x68/0x88
bus_register+0xdc/0x34c
subsys_virtual_register+0x34/0x78
wq_sysfs_init+0x1c/0x4c
do_one_initcall+0x50/0x1a8
kernel_init_freeable+0x230/0x2c8
kernel_init+0x10/0x100
ret_from_kernel_thread+0x14/0x1c
2. kobject_uevent_env() calls call_usermodehelper_exec() which executes
kernel_execve asynchronously.
3. Memory allocations in kernel_execve cause a page fault, bumping the
MM reference counter:
add_mm_counter_fast+0xb4/0xc0
handle_mm_fault+0x6e4/0xea0
__get_user_pages.part.78+0x190/0x37c
__get_user_pages_remote+0x128/0x360
get_arg_page+0x34/0xa0
copy_string_kernel+0x194/0x2a4
kernel_execve+0x11c/0x298
call_usermodehelper_exec_async+0x114/0x194
4. In case zero_pfn has not been initialized yet, zap_pte_range does
not decrement the MM_ANONPAGES RSS counter and the BUG message is
triggered shortly afterwards when __mmdrop checks the ref counters:
__mmdrop+0x98/0x1d0
free_bprm+0x44/0x118
kernel_execve+0x160/0x1d8
call_usermodehelper_exec_async+0x114/0x194
ret_from_kernel_thread+0x14/0x1c
To avoid races such as described above, initialize init_zero_pfn at
early_initcall level. Depending on the architecture, ZERO_PAGE is
either constant or gets initialized even earlier, at paging_init, so
there is no issue with initializing zero_pfn earlier.
Linus Torvalds [Tue, 30 Mar 2021 15:55:47 +0000 (08:55 -0700)]
Merge tag 'for-linus-5.12b-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"One Xen related security fix (XSA-371)"
* tag 'for-linus-5.12b-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen-blkback: don't leak persistent grants from xen_blkbk_map()
ftrace: Check if pages were allocated before calling free_pages()
It is possible that on error pg->size can be zero when getting its order,
which would return a -1 value. It is dangerous to pass in an order of -1
to free_pages(). Check if order is greater than or equal to zero before
calling free_pages().
Mauri Sandberg [Mon, 29 Mar 2021 12:31:36 +0000 (15:31 +0300)]
MIPS: kernel: setup.c: fix compilation error
With ath79_defconfig enabling CONFIG_MIPS_ELF_APPENDED_DTB gives a
compilation error. This patch fixes it.
Build log:
...
CC kernel/locking/percpu-rwsem.o
../arch/mips/kernel/setup.c:46:39: error: conflicting types for
'__appended_dtb'
const char __section(".appended_dtb") __appended_dtb[0x100000];
^~~~~~~~~~~~~~
In file included from ../arch/mips/kernel/setup.c:34:
../arch/mips/include/asm/bootinfo.h:118:13: note: previous declaration
of '__appended_dtb' was here
extern char __appended_dtb[];
^~~~~~~~~~~~~~
CC fs/attr.o
make[4]: *** [../scripts/Makefile.build:271: arch/mips/kernel/setup.o]
Error 1
...
Root cause seems to be: Fixes: b83ba0b9df56 ("MIPS: of: Introduce helper function to get DTB") Signed-off-by: Mauri Sandberg <[email protected]> Reviewed-by: Thomas Bogendoerfer <[email protected]> Cc: [email protected] Signed-off-by: Thomas Bogendoerfer <[email protected]>
Jeremy Szu [Tue, 30 Mar 2021 11:44:27 +0000 (19:44 +0800)]
ALSA: hda/realtek: fix mute/micmute LEDs for HP 640 G8
The HP EliteBook 640 G8 Notebook PC is using ALC236 codec which is
using 0x02 to control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.
Takashi Iwai [Mon, 29 Mar 2021 11:30:59 +0000 (13:30 +0200)]
ALSA: hda: Add missing sanity checks in PM prepare/complete callbacks
The recently added PM prepare and complete callbacks don't have the
sanity check whether the card instance has been properly initialized,
which may potentially lead to Oops.
This patch adds the azx_is_pm_ready() call in each place
appropriately like other PM callbacks.
The card power state change via snd_power_change_state() at the system
suspend/resume seems dropped mistakenly during the PM code rewrite.
The card power state doesn't play much role nowadays but it's still
referred in a few places such as the HDMI codec driver.
This patch restores them, but in a more appropriate place now in the
prepare and complete callbacks.
Gulam Mohamed [Thu, 25 Mar 2021 09:32:48 +0000 (09:32 +0000)]
scsi: iscsi: Fix race condition between login and sync thread
A kernel panic was observed due to a timing issue between the sync thread
and the initiator processing a login response from the target. The session
reopen can be invoked both from the session sync thread when iscsid
restarts and from iscsid through the error handler. Before the initiator
receives the response to a login, another reopen request can be sent from
the error handler/sync session. When the initial login response is
subsequently processed, the connection has been closed and the socket has
been released.
To fix this a new connection state, ISCSI_CONN_BOUND, is added:
- Set the connection state value to ISCSI_CONN_DOWN upon
iscsi_if_ep_disconnect() and iscsi_if_stop_conn()
- Set the connection state to the newly created value ISCSI_CONN_BOUND
after bind connection (transport->bind_conn())
- In iscsi_set_param(), return -ENOTCONN if the connection state is not
either ISCSI_CONN_BOUND or ISCSI_CONN_UP
Jason Gunthorpe [Mon, 29 Mar 2021 19:00:16 +0000 (16:00 -0300)]
vfio/nvlink: Add missing SPAPR_TCE_IOMMU depends
Compiling the nvlink stuff relies on the SPAPR_TCE_IOMMU otherwise there
are compile errors:
drivers/vfio/pci/vfio_pci_nvlink2.c:101:10: error: implicit declaration of function 'mm_iommu_put' [-Werror,-Wimplicit-function-declaration]
ret = mm_iommu_put(data->mm, data->mem);
As PPC only defines these functions when the config is set.
Previously this wasn't a problem by chance as SPAPR_TCE_IOMMU was the only
IOMMU that could have satisfied IOMMU_API on POWERNV.
Linus Torvalds [Mon, 29 Mar 2021 18:37:43 +0000 (11:37 -0700)]
Merge tag 'xtensa-20210329' of git://github.com/jcmvbkbc/linux-xtensa
Pull xtensa fixes from Max Filippov:
- fix build with separate exception vectors when they are placed too
far from the rest of the kernel
- fix uaccess-related livelock in do_page_fault.
* tag 'xtensa-20210329' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: fix uaccess-related livelock in do_page_fault
xtensa: move coprocessor_flush to the .text section
Max Filippov [Sun, 7 Feb 2021 12:57:58 +0000 (04:57 -0800)]
xtensa: fix uaccess-related livelock in do_page_fault
If a uaccess (e.g. get_user()) triggers a fault and there's a
fault signal pending, the handler will return to the uaccess without
having performed a uaccess fault fixup, and so the CPU will immediately
execute the uaccess instruction again, whereupon it will livelock
bouncing between that instruction and the fault handler.
Adrian Hunter [Fri, 26 Mar 2021 10:56:19 +0000 (12:56 +0200)]
PM: runtime: Fix race getting/putting suppliers at probe
pm_runtime_put_suppliers() must not decrement rpm_active unless the
consumer is suspended. That is because, otherwise, it could suspend
suppliers for an active consumer.
That can happen as follows:
static int driver_probe_device(struct device_driver *drv, struct device *dev)
{
int ret = 0;
pm_runtime_get_suppliers(dev);
if (dev->parent)
pm_runtime_get_sync(dev->parent);
At this point, dev can runtime suspend so rpm_put_suppliers() can run,
rpm_active becomes 1 (the lowest value).
pm_runtime_barrier(dev);
if (initcall_debug)
ret = really_probe_debug(dev, drv);
else
ret = really_probe(dev, drv);
Probe callback can have runtime resumed dev, and then runtime put
so dev is awaiting autosuspend, but rpm_active is 2.
pm_request_idle(dev);
if (dev->parent)
pm_runtime_put(dev->parent);
pm_runtime_put_suppliers(dev);
Now pm_runtime_put_suppliers() will put the supplier
i.e. rpm_active 2 -> 1, but consumer can still be active.
return ret;
}
Fix by checking the runtime status. For any status other than
RPM_SUSPENDED, rpm_active can be considered to be "owned" by
rpm_[get/put]_suppliers() and pm_runtime_put_suppliers() need do nothing.
Adrian Hunter [Fri, 26 Mar 2021 10:56:18 +0000 (12:56 +0200)]
PM: runtime: Fix ordering in pm_runtime_get_suppliers()
rpm_active indicates how many times the supplier usage_count has been
incremented. Consequently it must be updated after pm_runtime_get_sync() of
the supplier, not before.
Fixes: 4c06c4e6cf63 ("driver core: Fix possible supplier PM-usage counter imbalance") Signed-off-by: Adrian Hunter <[email protected]> Cc: 5.1+ <[email protected]> # 5.1+ Signed-off-by: Rafael J. Wysocki <[email protected]>
ACPI: tables: x86: Reserve memory occupied by ACPI tables
The following problem has been reported by George Kennedy:
Since commit 7fef431be9c9 ("mm/page_alloc: place pages to tail
in __free_pages_core()") the following use after free occurs
intermittently when ACPI tables are accessed.
BUG: KASAN: use-after-free in ibft_init+0x134/0xc49
Read of size 4 at addr ffff8880be453004 by task swapper/0/1
CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1-7a7fd0d #1
Call Trace:
dump_stack+0xf6/0x158
print_address_description.constprop.9+0x41/0x60
kasan_report.cold.14+0x7b/0xd4
__asan_report_load_n_noabort+0xf/0x20
ibft_init+0x134/0xc49
do_one_initcall+0xc4/0x3e0
kernel_init_freeable+0x5af/0x66b
kernel_init+0x16/0x1d0
ret_from_fork+0x22/0x30
ACPI tables mapped via kmap() do not have their mapped pages
reserved and the pages can be "stolen" by the buddy allocator.
Apparently, on the affected system, the ACPI table in question is
not located in "reserved" memory, like ACPI NVS or ACPI Data, that
will not be used by the buddy allocator, so the memory occupied by
that table has to be explicitly reserved to prevent the buddy
allocator from using it.
In order to address this problem, rearrange the initialization of the
ACPI tables on x86 to locate the initial tables earlier and reserve
the memory occupied by them.
The other architectures using ACPI should not be affected by this
change.
Pavel Begunkov [Mon, 29 Mar 2021 10:39:29 +0000 (11:39 +0100)]
io_uring: handle setup-failed ctx in kill_timeouts
general protection fault, probably for non-canonical address
0xdffffc0000000018: 0000 [#1] KASAN: null-ptr-deref
in range [0x00000000000000c0-0x00000000000000c7]
RIP: 0010:io_commit_cqring+0x37f/0xc10 fs/io_uring.c:1318
Call Trace:
io_kill_timeouts+0x2b5/0x320 fs/io_uring.c:8606
io_ring_ctx_wait_and_kill+0x1da/0x400 fs/io_uring.c:8629
io_uring_create fs/io_uring.c:9572 [inline]
io_uring_setup+0x10da/0x2ae0 fs/io_uring.c:9599
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xae
It can get into wait_and_kill() before setting up ctx->rings, and hence
io_commit_cqring() fails. Mimic poll cancel and do it only when we
completed events, there can't be any requests if it failed before
initialising rings.
Ikjoon Jang [Wed, 24 Mar 2021 10:51:52 +0000 (18:51 +0800)]
ALSA: usb-audio: Apply sample rate quirk to Logitech Connect
Logitech ConferenceCam Connect is a compound USB device with UVC and
UAC. Not 100% reproducible but sometimes it keeps responding STALL to
every control transfer once it receives get_freq request.
This patch adds 046d:0x084c to a snd_usb_get_sample_rate_quirk list.
Pavel Begunkov [Sat, 27 Mar 2021 09:59:30 +0000 (09:59 +0000)]
io_uring: always go for cancellation spin on exec
Always try to do cancellation in __io_uring_task_cancel() at least once,
so it actually goes and cleans its sqpoll tasks (i.e. via
io_sqpoll_cancel_sync()), otherwise sqpoll task may submit new requests
after cancellation and it's racy for many reasons.
Linus Torvalds [Sun, 28 Mar 2021 20:22:54 +0000 (13:22 -0700)]
Merge tag 'perf-tools-fixes-for-v5.12-2020-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tooling fixes from Arnaldo Carvalho de Melo:
- Avoid write of uninitialized memory when generating PERF_RECORD_MMAP*
records.
- Fix 'perf top' BPF support related crash with perf_event_paranoid=3 +
kptr_restrict.
- Validate raw event with sysfs exported format bits.
- Fix waipid on SIGCHLD delivery bugs in 'perf daemon'.
- Change to use bash for daemon test on Debian, where the default is
dash and thus fails for use of bashisms in this test.
- Fix memory leak in vDSO found using ASAN.
- Remove now useless (due to the fact that BPF now supports static
vars) failing sub test "BPF relocation checker".
- Fix auxtrace queue conflict.
- Sync linux/kvm.h with the kernel sources.
* tag 'perf-tools-fixes-for-v5.12-2020-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf test: Change to use bash for daemon test
perf record: Fix memory leak in vDSO found using ASAN
perf test: Remove now useless failing sub test "BPF relocation checker"
perf daemon: Return from kill functions
perf daemon: Force waipid for all session on SIGCHLD delivery
perf top: Fix BPF support related crash with perf_event_paranoid=3 + kptr_restrict
perf pmu: Validate raw event with sysfs exported format bits
perf synthetic events: Avoid write of uninitialized memory when generating PERF_RECORD_MMAP* records
tools headers UAPI: Sync linux/kvm.h with the kernel sources
perf synthetic-events: Fix uninitialized 'kernel_thread' variable
perf auxtrace: Fix auxtrace queue conflict
Linus Torvalds [Sun, 28 Mar 2021 19:19:16 +0000 (12:19 -0700)]
Merge tag 'x86-urgent-2021-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Two fixes:
- Fix build failure on Ubuntu with new GCC packages that turn
on -fcf-protection
- Fix SME memory encryption PTE encoding bug - AFAICT the code
worked on 4K page sizes (level 1) but had the wrong shift at
higher page level orders (level 2 and higher)"
* tag 'x86-urgent-2021-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/build: Turn off -fcf-protection for realmode targets
x86/mem_encrypt: Correct physical address calculation in __set_clr_pte_enc()
Linus Torvalds [Sun, 28 Mar 2021 19:12:22 +0000 (12:12 -0700)]
Merge tag 'locking-urgent-2021-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Ingo Molnar:
"Fix the non-debug mutex_lock_io_nested() method to map to
mutex_lock_io() instead of mutex_lock().
Right now nothing uses this API explicitly, but this is an
accident waiting to happen"
* tag 'locking-urgent-2021-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/mutex: Fix non debug version of mutex_lock_io_nested()
Linus Torvalds [Sun, 28 Mar 2021 19:06:21 +0000 (12:06 -0700)]
Merge tag '5.12-rc4-smb3' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Five cifs/smb3 fixes, two for stable.
Includes an important fix for encryption and an ACL fix, as well as a
fix for possible reflink data corruption"
* tag '5.12-rc4-smb3' of git://git.samba.org/sfrench/cifs-2.6:
smb3: fix cached file size problems in duplicate extents (reflink)
cifs: Silently ignore unknown oplock break handle
cifs: revalidate mapping when we open files for SMB1 POSIX
cifs: Fix chmod with modefromsid when an older ACE already exists.
cifs: Adjust key sizes and key generation routines for AES256 encryption
Linus Torvalds [Sun, 28 Mar 2021 18:42:05 +0000 (11:42 -0700)]
Merge tag 'io_uring-5.12-2021-03-27' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- Use thread info versions of flag testing, as discussed last week.
- The series enabling PF_IO_WORKER to just take signals, instead of
needing to special case that they do not in a bunch of places. Ends
up being pretty trivial to do, and then we can revert all the special
casing we're currently doing.
- Kill dead pointer assignment
- Fix hashed part of async work queue trace
- Fix sign extension issue for IORING_OP_PROVIDE_BUFFERS
- Fix a link completion ordering regression in this merge window
- Cancellation fixes
* tag 'io_uring-5.12-2021-03-27' of git://git.kernel.dk/linux-block:
io_uring: remove unsued assignment to pointer io
io_uring: don't cancel extra on files match
io_uring: don't cancel-track common timeouts
io_uring: do post-completion chore on t-out cancel
io_uring: fix timeout cancel return code
Revert "signal: don't allow STOP on PF_IO_WORKER threads"
Revert "kernel: freezer should treat PF_IO_WORKER like PF_KTHREAD for freezing"
Revert "kernel: treat PF_IO_WORKER like PF_KTHREAD for ptrace/signals"
Revert "signal: don't allow sending any signals to PF_IO_WORKER threads"
kernel: stop masking signals in create_io_thread()
io_uring: handle signals for IO threads like a normal thread
kernel: don't call do_exit() for PF_IO_WORKER threads
io_uring: maintain CQE order of a failed link
io-wq: fix race around pending work on teardown
io_uring: do ctx sqd ejection in a clear context
io_uring: fix provide_buffers sign extension
io_uring: don't skip file_end_write() on reissue
io_uring: correct io_queue_async_work() traces
io_uring: don't use {test,clear}_tsk_thread_flag() for current
Linus Torvalds [Sun, 28 Mar 2021 18:37:42 +0000 (11:37 -0700)]
Merge tag 'block-5.12-2021-03-27' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Fix regression from this merge window with the xarray partition
change, which allowed partition counts that overflow the u8 that
holds the partition number (Ming)
- Fix zone append warning (Johannes)
- Segmentation count fix for multipage bvecs (David)
- Partition scan fix (Chris)
* tag 'block-5.12-2021-03-27' of git://git.kernel.dk/linux-block:
block: don't create too many partitions
block: support zone append bvecs
block: recalculate segment count for multi-segment discards correctly
block: clear GD_NEED_PART_SCAN later in bdev_disk_changed
Linus Torvalds [Sun, 28 Mar 2021 18:34:47 +0000 (11:34 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Seven fixes, all in drivers (qla2xxx, mkt3sas, qedi, target,
ibmvscsi).
The most serious are the target pscsi oom and the qla2xxx revert which
can otherwise cause a use after free"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: pscsi: Clean up after failure in pscsi_map_sg()
scsi: target: pscsi: Avoid OOM in pscsi_map_sg()
scsi: mpt3sas: Fix error return code of mpt3sas_base_attach()
scsi: qedi: Fix error return code of qedi_alloc_global_queues()
scsi: Revert "qla2xxx: Make sure that aborted commands are freed"
scsi: ibmvfc: Make ibmvfc_wait_for_ops() MQ aware
scsi: ibmvfc: Fix potential race in ibmvfc_wait_for_ops()
Jens Axboe [Fri, 26 Mar 2021 16:05:25 +0000 (10:05 -0600)]
tomoyo: don't special case PF_IO_WORKER for PF_KTHREAD
Since commit 3bfe6106693b6b4b ("io-wq: fork worker threads from original
task") stopped using PF_KTHREAD flag for the io_uring PF_IO_WORKER threads,
tomoyo_kernel_service() no longer needs to check PF_IO_WORKER flag.
(This is a 5.12+ patch. Please don't send to stable kernels.)
Pavel Begunkov [Thu, 25 Mar 2021 18:32:45 +0000 (18:32 +0000)]
io_uring: don't cancel extra on files match
As tasks always wait and kill their io-wq on exec/exit, files are of no
more concern to us, so we don't need to specifically cancel them by hand
in those cases. Moreover we should not, because io_match_task() looks at
req->task->files now, which is always true and so leads to extra
cancellations, that wasn't a case before per-task io-wq.
Pavel Begunkov [Thu, 25 Mar 2021 18:32:44 +0000 (18:32 +0000)]
io_uring: don't cancel-track common timeouts
Don't account usual timeouts (i.e. not linked) as REQ_F_INFLIGHT but
keep behaviour prior to dd59a3d595cc1 ("io_uring: reliably cancel linked
timeouts").
Pavel Begunkov [Thu, 25 Mar 2021 18:32:43 +0000 (18:32 +0000)]
io_uring: do post-completion chore on t-out cancel
Don't forget about io_commit_cqring() + io_cqring_ev_posted() after
exit/exec cancelling timeouts. Both functions declared only after
io_kill_timeouts(), so to avoid tons of forward declarations move
it down.
Before IO threads accepted signals, the freezer using take signals to wake
up an IO thread would cause them to loop without any way to clear the
pending signal. That is no longer the case, so stop special casing
PF_IO_WORKER in the freezer.
The IO threads do allow signals now, including SIGSTOP, and we can allow
ptrace attach. Attaching won't reveal anything interesting for the IO
threads, but it will allow eg gdb to attach to a task with io_urings
and IO threads without complaining. And once attached, it will allow
the usual introspection into regular threads.
Jens Axboe [Fri, 26 Mar 2021 15:05:22 +0000 (09:05 -0600)]
kernel: stop masking signals in create_io_thread()
This is racy - move the blocking into when the task is created and
we're marking it as PF_IO_WORKER anyway. The IO threads are now
prepared to handle signals like SIGSTOP as well, so clear that from
the mask to allow proper stopping of IO threads.
Jens Axboe [Fri, 26 Mar 2021 00:16:06 +0000 (18:16 -0600)]
io_uring: handle signals for IO threads like a normal thread
We go through various hoops to disallow signals for the IO threads, but
there's really no reason why we cannot just allow them. The IO threads
never return to userspace like a normal thread, and hence don't go through
normal signal processing. Instead, just check for a pending signal as part
of the work loop, and call get_signal() to handle it for us if anything
is pending.
With that, we can support receiving signals, including special ones like
SIGSTOP.
Ming Lei [Sat, 27 Mar 2021 07:13:09 +0000 (15:13 +0800)]
block: don't create too many partitions
Commit a33df75c6328 ("block: use an xarray for disk->part_tbl") drops the
check on max supported number of partitionsr, and allows partition with
bigger partition numbers to be added. However, ->bd_partno is defined as
u8, so partition index of xarray table may not match with ->bd_partno.
Then delete_partition() may delete one unmatched partition, and caused
use-after-free.
Merge tag 'fpga-fixes-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-linus
Moritz writes:
FPGA Manager fixes for 5.12
Richard's fix addresses an errornously flipped flag.
All patches have been reviewed on the mailing list, and have been in the
last few linux-next releases (as part of my fixes branch) without issues.
Signed-off-by: Moritz Fischer <[email protected]>
* tag 'fpga-fixes-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga:
firmware: stratix10-svc: reset COMMAND_RECONFIG_FLAG_PARTIAL to 0
Steve French [Fri, 26 Mar 2021 23:41:55 +0000 (18:41 -0500)]
smb3: fix cached file size problems in duplicate extents (reflink)
There were two problems (one of which could cause data corruption)
that were noticed with duplicate extents (ie reflink)
when debugging why various xfstests were being incorrectly skipped
(e.g. generic/138, generic/140, generic/142). First, we were not
updating the file size locally in the cache when extending a
file due to reflink (it would refresh after actimeo expires)
but xfstest was checking the size immediately which was still
0 so caused the test to be skipped. Second, we were setting
the target file size (which could shrink the file) in all cases
to the end of the reflinked range rather than only setting the
target file size when reflink would extend the file.
Make SMB2 not print out an error when an oplock break is received for an
unknown handle, similar to SMB1. The debug message which is printed for
these unknown handles may also be misleading, so fix that too.
The SMB2 lease break path is not affected by this patch.
Without this, a program which writes to a file from one thread, and
opens, reads, and writes the same file from another thread triggers the
below errors several times a minute when run against a Samba server
configured with "smb2 leases = no".
Under SMB1 + POSIX, if an inode is reused on a server after we have read and
cached a part of a file, when we then open the new file with the
re-cycled inode there is a chance that we may serve the old data out of cache
to the application.
This only happens for SMB1 (deprecated) and when posix are used.
The simplest solution to avoid this race is to force a revalidate
on smb1-posix open.
Shyam Prasad N [Fri, 26 Mar 2021 10:28:16 +0000 (10:28 +0000)]
cifs: Fix chmod with modefromsid when an older ACE already exists.
My recent fixes to cifsacl to maintain inherited ACEs had
regressed modefromsid when an older ACL already exists.
Found testing xfstest 495 with modefromsid mount option
Fixes: f5065508897a ("cifs: Retain old ACEs when converting between mode bits and ACL") Signed-off-by: Shyam Prasad N <[email protected]> Reviewed-by: Paulo Alcantara (SUSE) <[email protected]> Signed-off-by: Steve French <[email protected]>
Jens Axboe [Fri, 26 Mar 2021 14:57:10 +0000 (08:57 -0600)]
kernel: don't call do_exit() for PF_IO_WORKER threads
Right now we're never calling get_signal() from PF_IO_WORKER threads, but
in preparation for doing so, don't handle a fatal signal for them. The
workers have state they need to cleanup when exiting, so just return
instead of calling do_exit() on their behalf. The threads themselves will
detect a fatal signal and do proper shutdown.
- Fix DM core's zoned model and zone sectors checks.
- Fix spurious "detected capacity change" pr_info() when creating new
DM device.
- Fix DM ioctl out of bounds array access in handling of
DM_LIST_DEVICES_CMD when no devices exist.
* tag 'for-5.12/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm ioctl: fix out of bounds array access when no devices
dm: don't report "detected capacity change" on device creation
dm table: Fix zoned model check and zone sectors check
dm verity: fix DM_VERITY_OPTS_MAX value
Mikulas Patocka [Fri, 26 Mar 2021 18:32:32 +0000 (14:32 -0400)]
dm ioctl: fix out of bounds array access when no devices
If there are not any dm devices, we need to zero the "dev" argument in
the first structure dm_name_list. However, this can cause out of
bounds write, because the "needed" variable is zero and len may be
less than eight.
Fix this bug by reporting DM_BUFFER_FULL_FLAG if the result buffer is
too small to hold the "nl->dev" value.
Linus Torvalds [Fri, 26 Mar 2021 18:33:39 +0000 (11:33 -0700)]
Merge tag 'acpi-5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a memory management regression in ACPICA, repair an ACPI
blacklist entry damaged inadvertently during the 5.11 cycle and fix
the bookkeeping of devices with the same primary device ID in the ACPI
core.
Specifics:
- Make ACPICA use the same object cache consistently when allocating
and freeing objects (Vegard Nossum)
- Add a callback pointer removed inadvertently during the 5.11 cycle
to the ACPI backlight blacklist entry for Sony VPCEH3U1E (Chris
Chiu)
- Make the ACPI device enumeration core use IDA for creating names of
ACPI device objects with the same primary device ID to avoid using
duplicate device object names in some cases (Andy Shevchenko)"
* tag 'acpi-5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Always create namespace nodes using acpi_ns_create_node()
ACPI: scan: Use unique number for instance_no
ACPI: video: Add missing callback back for Sony VPCEH3U1E
Linus Torvalds [Fri, 26 Mar 2021 18:29:36 +0000 (11:29 -0700)]
Merge tag 'pm-5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix an issue related to device links in the runtime PM framework
and debugfs usage in the Energy Model code.
Specifics:
- Modify the runtime PM device suspend to avoid suspending supplier
devices before the consumer device's status changes to
RPM_SUSPENDED (Rafael Wysocki)
- Change the Energy Model code to prevent it from attempting to
create its main debugfs directory too early (Lukasz Luba)"
* tag 'pm-5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: EM: postpone creating the debugfs dir till fs_initcall
PM: runtime: Defer suspending suppliers
Linus Torvalds [Fri, 26 Mar 2021 18:19:38 +0000 (11:19 -0700)]
Merge tag 'soc-fixes-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Too many fixes have accumulated in the soc tree, so this is a fairly
large set. As usual, most of the fixes are for devicetree files, but
there are also notable code changes for imx and omap regressions as
well as some maintainer file updates.
imx:
- Fix an Ethernet issue on imx6ul-14x14-evk board that is caused by
independent PHY reset.
- Add missing `dma-coherent` property for LayerScape device trees to
fix a kernel BUG report.
- Use IRQCHIP_DECLARE for AVIC driver to fix a boot issue on i.MX25
with fw_devlink=on.
- Add missing I2C pinctrl entry for imx8mp-phyboard-pollux-rdk board
to fix the broken I2C GPIO recovery support.
- Add `fsl,use-minimum-ecc` property for imx6ull-myir-mys-6ulx-eval
device tree to fix UBI filesystem mount failure.
at91:
- wrong phy address that blocks Ethernet use on boards with sama5d27
SoM1
- restrictive pin possibilities for sam9x60
omap:
- Fix ocp interconnect bus access error reporting for omap_l3_noc by
setting IRQF_NO_THREAD
- Fix changed mmc slot order regression by adding mmc aliases for
am335x
- Fix smartreflex init regression caused by dropped legacy data
- Fix ti-sysc driver warning on unbind if reset is not deasserted
- Fix flakey reset deassert for dra7 iva
stm32:
- MAINTAINER file updates
broadcom:
- brcmstb SoC ID build fix
- MAINTAINER file updates"
* tag 'soc-fixes-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: Add Alain Volmat as STM32 I2C/SMBUS maintainer
MAINTAINERS: Remove Vincent Abriou for STM/STI DRM drivers.
MAINTAINERS: Update some st.com email addresses to foss.st.com
ARM: dts: imx6ull: fix ubi filesystem mount failed
ARM: imx6ul-14x14-evk: Do not reset the Ethernet PHYs independently
arm64: dts: imx8mp-phyboard-pollux-rdk: Add missing pinctrl entry
arm64: dts: ls1012a: mark crypto engine dma coherent
arm64: dts: ls1043a: mark crypto engine dma coherent
arm64: dts: ls1046a: mark crypto engine dma coherent
ARM: imx: avic: Convert to using IRQCHIP_DECLARE
ARM: dts: at91: sam9x60: fix mux-mask to match product's datasheet
ARM: dts: at91: sam9x60: fix mux-mask for PA7 so it can be set to A, B and C
ARM: dts: at91-sama5d27_som1: fix phy address to 7
soc: ti: omap-prm: Fix occasional abort on reset deassert for dra7 iva
bus: ti-sysc: Fix warning on unbind if reset is not deasserted
ARM: OMAP2+: Fix smartreflex init regression after dropping legacy data
soc: ti: omap-prm: Fix reboot issue with invalid pcie reset map for dra7
MAINTAINERS: rectify BROADCOM PMB (POWER MANAGEMENT BUS) DRIVER
ARM: dts: am33xx: add aliases for mmc interfaces
bus: omap_l3_noc: mark l3 irqs as IRQF_NO_THREAD
Linus Torvalds [Fri, 26 Mar 2021 18:15:25 +0000 (11:15 -0700)]
Merge tag 'for-linus-5.12b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"This contains a small series with a more elegant fix of a problem
which was originally fixed in rc2"
* tag 'for-linus-5.12b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
Revert "xen: fix p2m size in dom0 for disabled memory hotplug case"
xen/x86: make XEN_BALLOON_MEMORY_HOTPLUG_LIMIT depend on MEMORY_HOTPLUG
Linus Torvalds [Fri, 26 Mar 2021 18:05:18 +0000 (11:05 -0700)]
Merge tag 'drm-fixes-2021-03-26' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"As expected last week things were overly quiet so this week things
seem to have caught up. It still isn't too major.
msm and amdgpu lead the size here, the msm fixes are pretty varied
across the driver, the amdgpu one is mostly the S0ix fixes with some
other minor ones. Otherwise there are a few i915 fixes and one each
for nouveau, etnaviv and rcar-du.
i915:
- DisplayPort LTTPR fixes around link training and limiting it
according to supported spec version.
- Fix enabled_planes bitmask to really represent only logically
enabled planes.
- Fix DSS CTL registers for ICL DSI transcoders
- Fix the GT fence revocation runtime PM logic.
nouveau:
- cursor size regression fix
amdgpu:
- S0ix fixes
- Add PCI ID
- Polaris PCIe DPM fix
- Display fix for high refresh rate monitors"
* tag 'drm-fixes-2021-03-26' of git://anongit.freedesktop.org/drm/drm: (37 commits)
drm/nouveau/kms/nve4-nv108: Limit cursors to 128x128
drm/i915: Fix the GT fence revocation runtime PM logic
drm/amdgpu/display: restore AUX_DPHY_TX_CONTROL for DCN2.x
drm/amdgpu: Add additional Sienna Cichlid PCI ID
drm/amd/pm: workaround for audio noise issue
drm/i915/dsc: fix DSS CTL register usage for ICL DSI transcoders
drm/i915: Fix enabled_planes bitmask
drm/i915: Disable LTTPR support when the LTTPR rev < 1.4
drm/i915: Disable LTTPR support when the DPCD rev < 1.4
drm/i915/ilk-glk: Fix link training on links with LTTPRs
drm/msm/disp/dpu1: icc path needs to be set before dpu runtime resume
drm/amdgpu: skip kfd suspend/resume for S0ix
drm/amdgpu: drop S0ix checks around CG/PG in suspend
drm/amdgpu: skip CG/PG for gfx during S0ix
drm/amdgpu: update comments about s0ix suspend/resume
drm/amdgpu/swsmu: skip gfx cgpg on s0ix suspend
drm/amdgpu: re-enable suspend phase 2 for S0ix
drm/amdgpu: move s0ix check into amdgpu_device_ip_suspend_phase2 (v3)
drm/amdgpu: clean up non-DC suspend/resume handling
drm/amdgpu: don't evict vram on APUs for suspend to ram (v4)
...
The function names in the comment blocks for the functions
scaling_available_frequencies_show() and
scaling_boost_frequencies_show() do not match the actual names.
Fixes: 6f19efc0a1ca08bc ("cpufreq: Add boost frequency support in core") Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
Jan Beulich [Fri, 26 Mar 2021 15:33:53 +0000 (16:33 +0100)]
xen-blkback: don't leak persistent grants from xen_blkbk_map()
The fix for XSA-365 zapped too many of the ->persistent_gnt[] entries.
Ones successfully obtained should not be overwritten, but instead left
for xen_blkbk_unmap_prepare() to pick up and put.
soc: qcom-geni-se: Cleanup the code to remove proxy votes
This reverts commit 048eb908a1f2 ("soc: qcom-geni-se: Add interconnect
support to fix earlycon crash")
ICC core and platforms drivers supports sync_state feature, which
ensures that the default ICC BW votes from the bootloader is not
removed until all it's consumers are probes.
The proxy votes were needed in case other QUP child drivers
I2C, SPI probes before UART, they can turn off the QUP-CORE clock
which is shared resources for all QUP driver, this causes unclocked
access to HW from earlycon.
Given above support from ICC there is no longer need to maintain
proxy votes on QUP-CORE ICC node from QUP wrapper driver for early
console usecase, the default votes won't be removed until real
console is probed.
projects / linux.git / log