Masahiro Yamada [Mon, 6 May 2024 13:35:42 +0000 (22:35 +0900)]
kbuild: provide reasonable defaults for tool coverage
The objtool, sanitizers (KASAN, UBSAN, etc.), and profilers (GCOV, etc.)
are intended only for kernel space objects.
For instance, the following are not kernel objects, and therefore should
opt out of coverage:
- vDSO
- purgatory
- bootloader (arch/*/boot/)
However, to exclude these from coverage, you need to explicitly set
OBJECT_FILES_NON_STNDARD=y, KASAN_SANITIZE=n, etc.
Kbuild can achieve this without relying on such variables because
objects not directly linked to vmlinux or modules are considered
"non-standard objects".
Detecting standard objects is straightforward:
- objects added to obj-y or lib-y are linked to vmlinux
- objects added to obj-m are linked to modules
There are some exceptional Makefiles (e.g., arch/s390/boot/Makefile,
arch/xtensa/boot/lib/Makefile) that use obj-y or lib-y for non-kernel
space objects, but they can be fixed later if necessary.
Going forward, objects that are not listed in obj-y, lib-y, or obj-m
will opt out of objtool, sanitizers, and profilers by default.
You can still override the Kbuild decision by explicitly specifying
OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc. but most of such Make
variables can be removed.
The next commit will clean up redundant variables.
Note:
This commit changes the coverage for some objects:
- exclude .vmlinux.export.o from UBSAN, KCOV
- exclude arch/csky/kernel/vdso/vgettimeofday.o from UBSAN
- exclude arch/parisc/kernel/vdso32/vdso32.so from UBSAN
- exclude arch/parisc/kernel/vdso64/vdso64.so from UBSAN
- exclude arch/x86/um/vdso/um_vdso.o from UBSAN
- exclude drivers/misc/lkdtm/rodata.o from UBSAN, KCOV
- exclude init/version-timestamp.o from UBSAN, KCOV
- exclude lib/test_fortify/*.o from all santizers and profilers
Masahiro Yamada [Sat, 4 May 2024 18:33:27 +0000 (03:33 +0900)]
kconfig: use linked list in sym_set_changed()
Following the approach employed in commit bedf92362317 ("kconfig: use
linked list in get_symbol_str() to iterate over menus"), simplify the
iteration on the menus of the specified symbol.
Masahiro Yamada [Sat, 4 May 2024 18:33:26 +0000 (03:33 +0900)]
kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED
SYMBOL_CHANGED and MENU_CHANGED are used to update GUI frontends
when the symbol value is changed. These are used inconsistently:
SYMBOL_CHANGED in gconf.c and MENU_CHANGE in qconf.cc.
MENU_CHANGED works more properly when a symbol has multiple prompts
(although such code is not ideal).
[test code]
config FOO
bool "foo prompt 1"
config FOO
bool "foo prompt 2"
In gconfig, if one of the two checkboxes is clicked, only the first
one is toggled. In xconfig, the two checkboxes work in sync.
Replace SYMBOL_CHANGED in gconf.c with MENU_CHANGED to align with
the xconfig behavior.
Masahiro Yamada [Sat, 4 May 2024 18:33:24 +0000 (03:33 +0900)]
kconfig: gconf: update pane correctly after loading a config file
Every time a config file is loaded (either by clicking the "Load" button
or selecting "File" -> "Load" from the menu), a new list is appended to
the pane.
The current tree needs to be cleared by calling gtk_tree_store_clear().
kbuild: buildtar: install riscv compressed images as vmlinuz
Use the KBUILD_IMAGE variable to determine the right kernel image to
install and install compressed images to /boot/vmlinuz-$version like the
'make install' target already does.
With commit 4b0bf9a01270 ("riscv: compat_vdso: install compat_vdso.so.dbg
to /lib/modules/*/vdso/") applied, all debug VDSO files are installed in
$(MODLIB)/vdso/.
kbuild: use $(src) instead of $(srctree)/$(src) for source directory
Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for
checked-in source files. It is merely a convention without any functional
difference. In fact, $(obj) and $(src) are exactly the same, as defined
in scripts/Makefile.build:
src := $(obj)
When the kernel is built in a separate output directory, $(src) does
not accurately reflect the source directory location. While Kbuild
resolves this discrepancy by specifying VPATH=$(srctree) to search for
source files, it does not cover all cases. For example, when adding a
header search path for local headers, -I$(srctree)/$(src) is typically
passed to the compiler.
This introduces inconsistency between upstream and downstream Makefiles
because $(src) is used instead of $(srctree)/$(src) for the latter.
To address this inconsistency, this commit changes the semantics of
$(src) so that it always points to the directory in the source tree.
Going forward, the variables used in Makefiles will have the following
meanings:
$(obj) - directory in the object tree
$(src) - directory in the source tree (changed by this commit)
$(objtree) - the top of the kernel object tree
$(srctree) - the top of the kernel source tree
Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced
with $(src).
kbuild: use $(obj)/ instead of $(src)/ for common pattern rules
Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for
checked-in source files. It is merely a convention without any functional
difference. In fact, $(obj) and $(src) are exactly the same, as defined
in scripts/Makefile.build:
src := $(obj)
Before changing the semantics of $(src) in the next commit, this commit
replaces $(obj)/ with $(src)/ in pattern rules where the prerequisite
might be a generated file.
C, assembly, Rust, and DTS files are sometimes generated by tools, so
they could be either generated files or real sources. The $(obj)/ prefix
works for both cases with the help of VPATH.
As mentioned above, $(obj) and $(src) are the same at this point, hence
this commit has no functional change.
I did not modify scripts/Makefile.userprogs because there is no use
case where userspace C files are generated.
kbuild: do not add $(srctree) or $(objtree) to header search paths
scripts/Makefile.lib is included not only from scripts/Makefile.build
but also from scripts/Makefile.{vmlinux,modfinal} for building generated
C files.
In scripts/Makefile.{vmlinux,modfinal}, $(obj) and $(src) are empty.
Therefore, the header include paths:
-I $(srctree)/$(src) -I $(objtree)/$(obj)
... become meaningless code:
-I $(srctree)/ -I $(objtree)/
Add these paths only when 'obj' and 'src' are defined.
kbuild: Remove support for Clang's ThinLTO caching
There is an issue in clang's ThinLTO caching (enabled for the kernel via
'--thinlto-cache-dir') with .incbin, which the kernel occasionally uses
to include data within the kernel, such as the .config file for
/proc/config.gz. For example, when changing the .config and rebuilding
vmlinux, the copy of .config in vmlinux does not match the copy of
.config in the build folder:
Without '--thinlto-cache-dir' or when using full LTO, this issue does
not occur.
Benchmarking incremental builds on a few different machines with and
without the cache shows a 20% increase in incremental build time without
the cache when measured by touching init/main.c and running 'make all'.
ARCH=arm64 defconfig + CONFIG_LTO_CLANG_THIN=y on an arm64 host:
Benchmark 1: With ThinLTO cache
Time (mean ± σ): 56.347 s ± 0.163 s [User: 83.768 s, System: 24.661 s]
Range (min … max): 56.109 s … 56.594 s 10 runs
Benchmark 2: Without ThinLTO cache
Time (mean ± σ): 67.740 s ± 0.479 s [User: 718.458 s, System: 31.797 s]
Range (min … max): 67.059 s … 68.556 s 10 runs
Summary
With ThinLTO cache ran
1.20 ± 0.01 times faster than Without ThinLTO cache
ARCH=x86_64 defconfig + CONFIG_LTO_CLANG_THIN=y on an x86_64 host:
Benchmark 1: With ThinLTO cache
Time (mean ± σ): 85.772 s ± 0.252 s [User: 91.505 s, System: 8.408 s]
Range (min … max): 85.447 s … 86.244 s 10 runs
Benchmark 2: Without ThinLTO cache
Time (mean ± σ): 103.833 s ± 0.288 s [User: 232.058 s, System: 8.569 s]
Range (min … max): 103.286 s … 104.124 s 10 runs
Summary
With ThinLTO cache ran
1.21 ± 0.00 times faster than Without ThinLTO cache
While it is unfortunate to take this performance improvement off the
table, correctness is more important. If/when this is fixed in LLVM, it
can potentially be brought back in a conditional manner. Alternatively,
a developer can just disable LTO if doing incremental compiles quickly
is important, as a full compile cycle can still take over a minute even
with the cache and it is unlikely that LTO will result in functional
differences for a kernel change.
The 'choice' statement is primarily used to exclusively select one
option, but the 'optional' property allows all entries to be disabled.
In the following example, both A and B can be disabled simultaneously:
choice
prompt "choose A, B, or nothing"
optional
config A
bool "A"
config B
bool "B"
endchoice
You can achieve the equivalent outcome by other means.
A common solution is to add another option to guard the choice block.
In the following example, you can set ENABLE_A_B_CHOICE=n to disable
the entire choice block:
choice
prompt "choose A or B"
depends on ENABLE_A_B_CHOICE
config A
bool "A"
config B
bool "B"
endchoice
Another approach is to insert one more entry:
choice
prompt "choose A, B, or disable both"
config A
bool "A"
config B
bool "B"
config DISABLE_A_AND_B
bool "choose this to disable both A and B"
endchoice
Some real examples are DEBUG_INFO_NONE, INITRAMFS_COMPRESSION_NONE,
LTO_NONE, etc.
The 'optional' property is even more unnecessary for a tristate choice.
Without the 'optional' property, you can disable A and B; you can set
'm' in the choice prompt, and disable A and B individually:
choice
prompt "choose one built-in or make them modular"
config A
tristate "A"
config B
tristate "B"
endchoice
In conclusion, the 'optional' property was unneeded.
sh: Convert the last use of 'optional' property in Kconfig
The 'choice' statement is primarily used to exclusively select one
option, but the 'optional' property allows all entries to be disabled.
This feature is rarely used. In fact, it is only used in arch/sh/Kconfig
because the equivalent outcome can be achieved by inserting one more
entry.
The 'optional' property support will be removed from Kconfig.
This commit replaces the 'optional' property with a dummy option,
CMDLINE_FROM_BOOTLOADER, as seen in some other architectures.
Note:
The 'default CMDLINE_OVERWRITE' statement does not work as intended
in combination with 'optional'. If neither CONFIG_CMDLINE_OVERWRITE
nor CONFIG_CMDLINE_EXTEND is specified in a defconfig file, both of
them are disabled. This is a bug. To maintain the current behavior,
I added CONFIG_CMDLINE_FROM_BOOTLOADER=y to those defconfig files.
kbuild: buildtar: remove warning for the default case
Given KBUILD_IMAGE properly set in arch/*/Makefile, the default case
should work in most scenarios. The only oddity is the naming of the
copy destination, vmlinux-kbuild-${KERNELRELEASE}. Let's rename it
to vmlinuz-${KERNELRELEASE} because the kernel is often compressed.
Remove the warning to avoid unnecessary patch submissions when the
default case suffices.
Remove the x86 case, which is now equivalent to the default.
kconfig: add menu_next() function and menu_for_each(_sub)_entry macros
Several functions require traversing menu entries sequentially. This
commit introduces some helpers to simplify such operations.
The menu_next() function facilitates depth-first traversal:
1. Descend to the child level if the current menu has one
2. Move to the next sibling at the same level if available
3. Ascend to the parent level if there is no more child or sibling
The menu_for_each_sub_entry() macro iterates over all submenu entries
using depth-first traverse.
The menu_for_each_entry() macro is the same, but over all menu entries.
Weak references are references that are permitted to remain unsatisfied
in the final link. This means they cannot be implemented using place
relative relocations, resulting in GOT entries when using position
independent code generation.
The notes section should always exist, so the weak annotations can be
omitted.
kallsyms: Avoid weak references for kallsyms symbols
kallsyms is a directory of all the symbols in the vmlinux binary, and so
creating it is somewhat of a chicken-and-egg problem, as its non-zero
size affects the layout of the binary, and therefore the values of the
symbols.
For this reason, the kernel is linked more than once, and the first pass
does not include any kallsyms data at all. For the linker to accept
this, the symbol declarations describing the kallsyms metadata are
emitted as having weak linkage, so they can remain unsatisfied. During
the subsequent passes, the weak references are satisfied by the kallsyms
metadata that was constructed based on information gathered from the
preceding passes.
Weak references lead to somewhat worse codegen, because taking their
address may need to produce NULL (if the reference was unsatisfied), and
this is not usually supported by RIP or PC relative symbol references.
Given that these references are ultimately always satisfied in the final
link, let's drop the weak annotation, and instead, provide fallback
definitions in the linker script that are only emitted if an unsatisfied
reference exists.
While at it, drop the FRV specific annotation that these symbols reside
in .rodata - FRV is long gone.
kbuild: buildtar: add comments about inconsistent package generation
scripts/package/buildtar checks some kernel packages, and copies the
first image found. This may potentially produce an inconsistent (and
possibly wrong) package.
For instance, the for-loop for arm64 checks Image.{bz2,gz,lz4,lzma,lzo},
and vmlinuz.efi, then copies the first image found, which might be a
stale image created in a previous build.
When CONFIG_EFI_ZBOOT is enabled in the pristine source tree,
'make ARCH=arm64 tar-pkg' will build and copy vmlinuz.efi. This is the
expected behavior.
If you build the kernel with CONFIG_EFI_ZBOOT disabled, Image.gz will
be created, which will remain in the tree until you run 'make clean'.
Even if CONFIG_EFI_ZBOOT is turned on later, 'make ARCH=arm64 tar-pkg'
will copy stale Image.gz instead of the latest vmlinuz.efi, as Image.gz
takes precedence over vmlinuz.efi.
In summary, the code "[ -f ... ] && cp" does not consistently produce
the desired outcome.
Other packaging targets are deterministic; deb-pkg and rpm-pkg copies
${KBUILD_IMAGE}, which is determined by CONFIG options.
I removed [ -f ... ] checks from x86, alpha, parisc, and the default
because they have a single kernel image to copy. If it is missing, it
should be an error.
I did not modify the code for mips, arm64, riscv. Instead, I left some
comments. Eventually, someone may fix the code, or at the very least,
it may discourage the copy-pasting of incorrect code to another
architecture.
Rob Herring [Fri, 5 Apr 2024 22:56:03 +0000 (17:56 -0500)]
dt-bindings: kbuild: Add separate target/dependency for processed-schema.json
Running dtbs_check and dt_compatible_check targets really only depend
on processed-schema.json, but the dependency is 'dt_binding_check'. That
was sort worked around with the CHECK_DT_BINDING variable in order to
skip some of the work that 'dt_binding_check' does. It still runs the
full checks of the schemas which is not necessary and adds 10s of
seconds to the build time. That's significant when checking only a few
DTBs and with recent changes that have improved the validation time by
6-7x.
Add a new target, dt_binding_schema, which just builds
processed-schema.json and can be used as the dependency for other
targets. The scripts_dtc dependency isn't needed either as the examples
aren't built for it.
Rob Herring [Fri, 5 Apr 2024 22:56:02 +0000 (17:56 -0500)]
dt-bindings: kbuild: Split targets out to separate rules
Masahiro pointed out the use of if_changed_rule is incorrect and command
line changes are not correctly accounted for.
To fix this, split up the DT binding validation target,
dt_binding_check, into multiple rules for each step: yamllint, schema
validtion with meta-schema, and building the processed schema.
One change in behavior is the yamllint or schema validation will be
re-run again when there are warnings present.
Instead of stripping off the $(srctree) multiple times do it once up
front, but keep the src/obj path as it is going to be needed in
subsequent commit.
Rename the variable to CHK_DT_EXAMPLES to better reflect what it
contains.
Merge tag 'char-misc-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver fixes from Greg KH:
"Here are some small char/misc and other driver fixes for 6.9-rc5.
Included in here are the following:
- binder driver fix for reported problem
- speakup crash fix
- mei driver fixes for reported problems
- comdei driver fix
- interconnect driver fixes
- rtsx driver fix
- peci.h kernel doc fix
All of these have been in linux-next for over a week with no reported
problems"
* tag 'char-misc-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
peci: linux/peci.h: fix Excess kernel-doc description warning
binder: check offset alignment in binder_get_object()
comedi: vmk80xx: fix incomplete endpoint checking
mei: vsc: Unregister interrupt handler for system suspend
Revert "mei: vsc: Call wake_up() in the threaded IRQ handler"
misc: rtsx: Fix rts5264 driver status incorrect when card removed
mei: me: disable RPL-S on SPS and IGN firmwares
speakup: Avoid crash on very long word
interconnect: Don't access req_list while it's being manipulated
interconnect: qcom: x1e80100: Remove inexistent ACV_PERF BCM
Merge tag 'driver-core-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull kernfs bugfix and documentation update from Greg KH:
"Here are two changes for 6.9-rc5 that deal with "driver core" stuff,
that do the following:
- sysfs reference leak fix
- embargoed-hardware-issues.rst update for Power
Both of these have been in linux-next for over a week with no reported
issues"
* tag 'driver-core-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Documentation: embargoed-hardware-issues.rst: Add myself for Power
fs: sysfs: Fix reference leak in sysfs_break_active_protection()
Merge tag 'tty-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.9-rc5 that
resolve a bunch of reported problems. Included in here are:
- MAINTAINERS and .mailmap update for Richard Genoud
- serial core regression fixes from 6.9-rc1 changes
- pci id cleanups
- serial core crash fix
- stm32 driver fixes
- 8250 driver fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: stm32: Reset .throttled state in .startup()
serial: stm32: Return IRQ_NONE in the ISR if no handling happend
serial: core: Fix missing shutdown and startup for serial base port
serial: core: Clearing the circular buffer before NULLifying it
MAINTAINERS: mailmap: update Richard Genoud's email address
serial/pmac_zilog: Remove flawed mitigation for rx irq flood
serial: 8250_pci: Remove redundant PCI IDs
serial: core: Fix regression when runtime PM is not enabled
serial: mxs-auart: add spinlock around changing cts state
serial: 8250_dw: Revert: Do not reclock if already at correct rate
serial: 8250_lpc18xx: disable clks on error in probe()
Merge tag 'usb-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes for 6.9-rc5.
Included in here are:
- MAINTAINER file update for invalid email address
- usb-serial device id updates
- typec driver fixes
- thunderbolt / usb4 driver fixes
- usb core shutdown fixes
- cdc-wdm driver revert for reported problem in -rc1
- usb gadget driver fixes
- xhci driver fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
USB: serial: option: add Telit FN920C04 rmnet compositions
usb: dwc3: ep0: Don't reset resource alloc flag
Revert "usb: cdc-wdm: close race between read and workqueue"
USB: serial: option: add Rolling RW101-GL and RW135-GL support
USB: serial: option: add Lonsung U8300/U9300 product
USB: serial: option: add support for Fibocom FM650/FG650
USB: serial: option: support Quectel EM060K sub-models
USB: serial: option: add Fibocom FM135-GL variants
usb: misc: onboard_usb_hub: Disable the USB hub clock on failure
thunderbolt: Avoid notify PM core about runtime PM resume
thunderbolt: Fix wake configurations after device unplug
usb: dwc2: host: Fix dereference issue in DDMA completion flow.
usb: typec: mux: it5205: Fix ChipID value typo
MAINTAINERS: Drop Li Yang as their email address stopped working
usb: gadget: fsl: Initialize udc before using it
usb: Disable USB3 LPM at shutdown
usb: gadget: f_ncm: Fix UAF ncm object at re-bind after usb ep transport error
usb: typec: tcpm: Correct the PDO counting in pd_set
usb: gadget: functionfs: Wait for fences before enqueueing DMABUF
usb: gadget: functionfs: Fix inverted DMA fence direction
...
Merge tag 'x86_urgent_for_v6.9_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix CPU feature dependencies of GFNI, VAES, and VPCLMULQDQ
- Print the correct error code when FRED reports a bad event type
- Add a FRED-specific INT80 handler without the special dances that
need to happen in the current one
- Enable the using-the-default-return-thunk-but-you-should-not warning
only on configs which actually enable those special return thunks
- Check the proper feature flags when selecting BHI retpoline
mitigation
* tag 'x86_urgent_for_v6.9_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpufeatures: Fix dependencies for GFNI, VAES, and VPCLMULQDQ
x86/fred: Fix incorrect error code printout in fred_bad_type()
x86/fred: Fix INT80 emulation for FRED
x86/retpolines: Enable the default thunk warning only on relevant configs
x86/bugs: Fix BHI retpoline check
Merge tag 'block-6.9-20240420' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"Just two minor fixes that should go into the 6.9 kernel release, one
fixing a regression with partition scanning errors, and one fixing a
WARN_ON() that can get triggered if we race with a timer"
* tag 'block-6.9-20240420' of git://git.kernel.dk/linux:
blk-iocost: do not WARN if iocg was already offlined
block: propagate partition scanning errors to the BLKRRPART ioctl
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"This is a bit on the large side, mostly due to two changes:
- Changes to disable some broken PMU virtualization (see below for
details under "x86 PMU")
- Clean up SVM's enter/exit assembly code so that it can be compiled
without OBJECT_FILES_NON_STANDARD. This fixes a warning "Unpatched
return thunk in use. This should not happen!" when running KVM
selftests.
Everything else is small bugfixes and selftest changes:
- Fix a mostly benign bug in the gfn_to_pfn_cache infrastructure
where KVM would allow userspace to refresh the cache with a bogus
GPA. The bug has existed for quite some time, but was exposed by a
new sanity check added in 6.9 (to ensure a cache is either
GPA-based or HVA-based).
- Drop an unused param from gfn_to_pfn_cache_invalidate_start() that
got left behind during a 6.9 cleanup.
- Fix a math goof in x86's hugepage logic for
KVM_SET_MEMORY_ATTRIBUTES that results in an array overflow
(detected by KASAN).
- Fix a bug where KVM incorrectly clears root_role.direct when
userspace sets guest CPUID.
- Fix a dirty logging bug in the where KVM fails to write-protect
SPTEs used by a nested guest, if KVM is using Page-Modification
Logging and the nested hypervisor is NOT using EPT.
x86 PMU:
- Drop support for virtualizing adaptive PEBS, as KVM's
implementation is architecturally broken without an obvious/easy
path forward, and because exposing adaptive PEBS can leak host LBRs
to the guest, i.e. can leak host kernel addresses to the guest.
- Set the enable bits for general purpose counters in
PERF_GLOBAL_CTRL at RESET time, as done by both Intel and AMD
processors.
- Disable LBR virtualization on CPUs that don't support LBR
callstacks, as KVM unconditionally uses
PERF_SAMPLE_BRANCH_CALL_STACK when creating the perf event, and
would fail on such CPUs.
Tests:
- Fix a flaw in the max_guest_memory selftest that results in it
exhausting the supply of ucall structures when run with more than
256 vCPUs.
- Mark KVM_MEM_READONLY as supported for RISC-V in
set_memory_region_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (30 commits)
KVM: Drop unused @may_block param from gfn_to_pfn_cache_invalidate_start()
KVM: selftests: Add coverage of EPT-disabled to vmx_dirty_log_test
KVM: x86/mmu: Fix and clarify comments about clearing D-bit vs. write-protecting
KVM: x86/mmu: Remove function comments above clear_dirty_{gfn_range,pt_masked}()
KVM: x86/mmu: Write-protect L2 SPTEs in TDP MMU when clearing dirty status
KVM: x86/mmu: Precisely invalidate MMU root_role during CPUID update
KVM: VMX: Disable LBR virtualization if the CPU doesn't support LBR callstacks
perf/x86/intel: Expose existence of callback support to KVM
KVM: VMX: Snapshot LBR capabilities during module initialization
KVM: x86/pmu: Do not mask LVTPC when handling a PMI on AMD platforms
KVM: x86: Snapshot if a vCPU's vendor model is AMD vs. Intel compatible
KVM: x86: Stop compiling vmenter.S with OBJECT_FILES_NON_STANDARD
KVM: SVM: Create a stack frame in __svm_sev_es_vcpu_run()
KVM: SVM: Save/restore args across SEV-ES VMRUN via host save area
KVM: SVM: Save/restore non-volatile GPRs in SEV-ES VMRUN via host save area
KVM: SVM: Clobber RAX instead of RBX when discarding spec_ctrl_intercepted
KVM: SVM: Drop 32-bit "support" from __svm_sev_es_vcpu_run()
KVM: SVM: Wrap __svm_sev_es_vcpu_run() with #ifdef CONFIG_KVM_AMD_SEV
KVM: SVM: Create a stack frame in __svm_vcpu_run() for unwinding
KVM: SVM: Remove a useless zeroing of allocated memory
...
Merge tag 'powerpc-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix wireguard loading failure on pre-Power10 due to Power10 crypto
routines
- Fix papr-vpd selftest failure due to missing variable initialization
- Avoid unnecessary get/put in spapr_tce_platform_iommu_attach_dev()
Thanks to Geetika Moolchandani, Jason Gunthorpe, Michal Suchánek, Nathan
Lynch, and Shivaprasad G Bhat.
* tag 'powerpc-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc/papr-vpd: Fix missing variable initialization
powerpc/crypto/chacha-p10: Fix failure on non Power10
powerpc/iommu: Refactor spapr_tce_platform_iommu_attach_dev()
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A couple clk driver fixes, a build fix, and a deadlock fix:
- Mediatek mt7988 has broken PCIe because the wrong parent is used
- Mediatek clk drivers may deadlock when registering their clks
because the clk provider device is repeatedly runtime PM resumed
and suspended during probe and clk registration.
Resuming the clk provider device deadlocks with an ABBA deadlock
due to genpd_lock and the clk prepare_lock. The fix is to keep the
device runtime resumed while registering clks.
- Another runtime PM related deadlock, this time with disabling
unused clks during late init.
We get an ABBA deadlock where a device is runtime PM resuming (or
suspending) while the disabling of unused clks is happening in
parallel. That runtime PM action calls into the clk framework and
tries to grab the clk prepare_lock while the disabling of unused
clks holds the prepare_lock and is waiting for that runtime PM
action to complete.
The fix is to runtime resume all the clk provider devices before
grabbing the clk prepare_lock during disable unused.
- A build fix to provide an empty devm_clk_rate_exclusive_get()
function when CONFIG_COMMON_CLK=n"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: mediatek: mt7988-infracfg: fix clocks for 2nd PCIe port
clk: mediatek: Do a runtime PM get on controllers during probe
clk: Get runtime PM before walking tree for clk_summary
clk: Get runtime PM before walking tree during disable_unused
clk: Initialize struct clk_core kref earlier
clk: Don't hold prepare_lock when calling kref_put()
clk: Remove prepare_lock hold assertion in __clk_release()
clk: Provide !COMMON_CLK dummy for devm_clk_rate_exclusive_get()
Merge tag 'perf-tools-fixes-for-v6.9-2024-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Namhyung Kim:
"A random set of small bug fixes:
- Fix perf annotate TUI when used with data type profiling
- Work around BPF verifier about sighand lock checking
And a set of kernel header synchronization"
* tag 'perf-tools-fixes-for-v6.9-2024-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
tools/include: Sync arm64 asm/cputype.h with the kernel sources
tools/include: Sync asm-generic/bitops/fls.h with the kernel sources
tools/include: Sync x86 asm/msr-index.h with the kernel sources
tools/include: Sync x86 asm/irq_vectors.h with the kernel sources
tools/include: Sync x86 CPU feature headers with the kernel sources
tools/include: Sync uapi/sound/asound.h with the kernel sources
tools/include: Sync uapi/linux/kvm.h and asm/kvm.h with the kernel sources
tools/include: Sync uapi/linux/fs.h with the kernel sources
tools/include: Sync uapi/drm/i915_drm.h with the kernel sources
perf lock contention: Add a missing NULL check
perf annotate: Make sure to call symbol__annotate2() in TUI
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
"Two fixes for the selftests:
- CONFIG_IOMMUFD_TEST needs CONFIG_IOMMUFD_DRIVER to work
- The kconfig fragment sshould include fault injection so the fault
injection test can work"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Add config needed for iommufd_fail_nth
iommufd: Add missing IOMMUFD_DRIVER kconfig for the selftest
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
- Add a missing mutex_destroy() in rxe
- Enhance the debugging print for cm_destroy failures to help debug
these
- Fix mlx5 MAD processing in cases where multiport devices are running
in switchedev mode
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/mlx5: Fix port number for counter query in multi-port configuration
RDMA/cm: Print the old state when cm_destroy_id gets timeout
RDMA/rxe: Fix the problem "mutex_destroy missing"
Merge tag '9p-fixes-for-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs
Pull fs/9p fixes from Eric Van Hensbergen:
"This contains a reversion of one of the original 6.9 patches which
seems to have been the cause of most of the instability. It also
incorporates several fixes to legacy support and cache fixes.
There are few additional changes to improve stability, but I want
another week of testing before sending them upstream"
* tag '9p-fixes-for-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
fs/9p: drop inodes immediately on non-.L too
fs/9p: Revert "fs/9p: fix dups even in uncached mode"
fs/9p: remove erroneous nlink init from legacy stat2inode
9p: explicitly deny setlease attempts
fs/9p: fix the cache always being enabled on files with qid flags
fs/9p: translate O_TRUNC into OTRUNC
fs/9p: only translate RWX permissions for plain 9P2000
Merge tag 'fuse-fixes-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
- Fix two bugs in the new passthrough mode
- Fix a statx bug introduced in v6.6
- Fix code documentation
* tag 'fuse-fixes-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
cuse: add kernel-doc comments to cuse_process_init_reply()
fuse: fix leaked ENOSYS error on first statx call
fuse: fix parallel dio write on file open in passthrough mode
fuse: fix wrong ff->iomode state changes from parallel dio write
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Fix a kernel fault during page table walking in huge_pte_alloc() with
PTABLE_LEVELS=5 due to using p4d_offset() instead of p4d_alloc()
- head.S fix and cleanup to disable the MMU before toggling the
HCR_EL2.E2H bit when entering the kernel with the MMU on from the EFI
stub. Changing this bit (currently from VHE to nVHE) causes some
system registers as well as page table descriptors to be interpreted
differently, potentially resulting in spurious MMU faults
- Fix translation fault in swsusp_save() accessing MEMBLOCK_NOMAP
memory ranges due to kernel_page_present() returning true in most
configurations other than rodata_full == true,
CONFIG_DEBUG_PAGEALLOC=y or CONFIG_KFENCE=y
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: hibernate: Fix level3 translation fault in swsusp_save()
arm64/head: Disable MMU at EL2 before clearing HCR_EL2.E2H
arm64/head: Drop unnecessary pre-disable-MMU workaround
arm64/hugetlb: Fix page table walk in huge_pte_alloc()
Merge tag 's390-6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Fix NULL pointer dereference in program check handler
- Fake IRBs are important events relevant for problem analysis. Add
traces when queueing and delivering
- Fix a race condition in ccw_device_set_online() that can cause the
online process to fail
- Deferred condition code 1 response indicates that I/O was not started
and should be retried. The current QDIO implementation handles a cc1
response as an error, resulting in a failed QDIO setup. Fix that by
retrying the setup when a cc1 response is received
* tag 's390-6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/mm: Fix NULL pointer dereference
s390/cio: log fake IRB events
s390/cio: fix race condition during online processing
s390/qdio: handle deferred cc1
Currently we allocate the memory for static_command_line based on
"boot_command_line", but it will copy "command_line" into it. So we
use the length of "command_line" instead of "boot_command_line" (as
we previously did)
- Use memblock_free_late() in xbc_exit() instead of memblock_free()
after the buddy system is initialized
- Fix a kerneldoc warning
* tag 'bootconfig-fixes-v6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
bootconfig: Fix the kerneldoc of _xbc_exit()
bootconfig: use memblock_free_late to free xbc memory to buddy
init/main.c: Fix potential static_command_line memory overflow
Merge tag 'thermal-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"This prevents the thermal debug code from attempting to divide by zero
and corrects trip point statistics (Rafael Wysocki)"
* tag 'thermal-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/debugfs: Add missing count increment to thermal_debug_tz_trip_up()
Merge tag 'sound-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Things look calm and normal, we got handful HD-audio-related small
fixes and a fix for MIDI 2.0 UMP handling"
* tag 'sound-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: seq: ump: Fix conversion from MIDI2 to MIDI1 UMP messages
ALSA: hda/realtek - Enable audio jacks of Haier Boyue G42 with ALC269VC
ALSA: hda/realtek: Add quirks for Huawei Matebook D14 NBLB-WAX9N
ALSA: hda/realtek: Fix volumn control of ThinkBook 16P Gen4
ALSA: hda/realtek: Fixes for Asus GU605M and GA403U sound
ALSA: hda/tas2781: Add new vendor_id and subsystem_id to support ThinkPad ICE-1
ALSA: hda/tas2781: correct the register for pow calibrated data
ALSA: hda/realtek: Add quirk for HP SnowWhite laptops
Merge tag 'drm-fixes-2024-04-19' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Regular week of fixes, seems to be about right for this time in the
release cycle, amdgpu, and nouveau are the main one with some
scattered fixes otherwise.
ttm:
- Stop pooling cached NUMA pages
amdgpu:
- Fix invalid resource->start check
- USB-C DSC fix
- Fix a potential UAF in VA IOCTL
- Fix visible VRAM handling during faults
amdkfd:
- Fix memory leak in create_process failure
radeon:
- Silence UBSAN warnings from variable sized arrays
nouveau:
- dp: Don't probe DP ports twice
- nv04: Fix OOB access
- nv50: Disable AUX bus for disconnected DP ports
- nvkm: Fix instmem race condition
panel:
- Don't unregister DSI devices in several drivers
v3d:
- Fix enabled_ns increment
xe:
- Fix bo leak on error path during fb init
- Fix use-after-free due to order vm is put and destroyed"
* tag 'drm-fixes-2024-04-19' of https://gitlab.freedesktop.org/drm/kernel:
drm/radeon: silence UBSAN warning (v3)
drm/radeon: make -fstrict-flex-arrays=3 happy
drm/amdgpu: fix visible VRAM handling during faults
drm/amdgpu: validate the parameters of bo mapping operations more clearly
Revert "drm/amd/display: fix USB-C flag update after enc10 feature init"
drm/amdkfd: Fix memory leak in create_process failure
drm/amdgpu: remove invalid resource->start check v2
drm/xe/vm: prevent UAF with asid based lookup
drm/xe: Fix bo leak in intel_fb_bo_framebuffer_init
drm/panel: novatek-nt36682e: don't unregister DSI device
drm/panel: visionox-rm69299: don't unregister DSI device
drm/nouveau/dp: Don't probe eDP ports twice harder
drm/nouveau/kms/nv50-: Disable AUX bus for disconnected DP ports
drm/v3d: Don't increment `enabled_ns` twice
drm/vmwgfx: Sort primary plane formats by order of preference
drm/vmwgfx: Fix crtc's atomic check conditional
drm/vmwgfx: Fix prime import/export
drm/ttm: stop pooling cached NUMA pages v2
drm: nv04: Fix out of bounds access
nouveau: fix instmem race condition around ptr stores
Merge tag 'mm-hotfixes-stable-2024-04-18-14-41' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"15 hotfixes. 9 are cc:stable and the remainder address post-6.8 issues
or aren't considered suitable for backporting.
There are a significant number of fixups for this cycle's page_owner
changes (series "page_owner: print stacks and their outstanding
allocations"). Apart from that, singleton changes all over, mainly in
MM"
* tag 'mm-hotfixes-stable-2024-04-18-14-41' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
nilfs2: fix OOB in nilfs_set_de_type
MAINTAINERS: update Naoya Horiguchi's email address
fork: defer linking file vma until vma is fully initialized
mm/shmem: inline shmem_is_huge() for disabled transparent hugepages
mm,page_owner: defer enablement of static branch
Squashfs: check the inode number is not the invalid value of zero
mm,swapops: update check in is_pfn_swap_entry for hwpoison entries
mm/memory-failure: fix deadlock when hugetlb_optimize_vmemmap is enabled
mm/userfaultfd: allow hugetlb change protection upon poison entry
mm,page_owner: fix printing of stack records
mm,page_owner: fix accounting of pages when migrating
mm,page_owner: fix refcount imbalance
mm,page_owner: update metadata for tail pages
userfaultfd: change src_folio after ensuring it's unpinned in UFFDIO_MOVE
mm/madvise: make MADV_POPULATE_(READ|WRITE) handle VM_FAULT_RETRY properly
arm64: hibernate: Fix level3 translation fault in swsusp_save()
On arm64 machines, swsusp_save() faults if it attempts to access
MEMBLOCK_NOMAP memory ranges. This can be reproduced in QEMU using UEFI
when booting with rodata=off debug_pagealloc=off and CONFIG_KFENCE=n:
The reason is swsusp_save() -> copy_data_pages() -> page_is_saveable()
-> kernel_page_present() assuming that a page is always present when
can_set_direct_map() is false (all of rodata_full,
debug_pagealloc_enabled() and arm64_kfence_can_set_direct_map() false),
irrespective of the MEMBLOCK_NOMAP ranges. Such MEMBLOCK_NOMAP regions
should not be saved during hibernation.
This problem was introduced by changes to the pfn_valid() logic in
commit a7d9f306ba70 ("arm64: drop pfn_valid_within() and simplify
pfn_valid()").
Similar to other architectures, drop the !can_set_direct_map() check in
kernel_page_present() so that page_is_savable() skips such pages.
Li Nan [Fri, 19 Apr 2024 09:32:57 +0000 (17:32 +0800)]
blk-iocost: do not WARN if iocg was already offlined
In iocg_pay_debt(), warn is triggered if 'active_list' is empty, which
is intended to confirm iocg is active when it has debt. However, warn
can be triggered during a blkcg or disk removal, if iocg_waitq_timer_fn()
is run at that time:
The warn in this situation is meaningless. Since this iocg is being
removed, the state of the 'active_list' is irrelevant, and 'waitq_timer'
is canceled after removing 'active_list' in ioc_pd_free(), which ensures
iocg is freed after iocg_waitq_timer_fn() returns.
Therefore, add the check if iocg was already offlined to avoid warn
when removing a blkcg or disk.
thermal/debugfs: Add missing count increment to thermal_debug_tz_trip_up()
The count field in struct trip_stats, representing the number of times
the zone temperature was above the trip point, needs to be incremented
in thermal_debug_tz_trip_up(), for two reasons.
First, if a trip point is crossed on the way up for the first time,
thermal_debug_update_temp() called from update_temperature() does
not see it because it has not been added to trips_crossed[] array
in the thermal zone's struct tz_debugfs object yet. Therefore, when
thermal_debug_tz_trip_up() is called after that, the trip point's
count value is 0, and the attempt to divide by it during the average
temperature computation leads to a divide error which causes the kernel
to crash. Setting the count to 1 before the division by incrementing it
fixes this problem.
Second, if a trip point is crossed on the way up, but it has been
crossed on the way up already before, its count value needs to be
incremented to make a record of the fact that the zone temperature is
above the trip now. Without doing that, if the mitigations applied
after crossing the trip cause the zone temperature to drop below its
threshold, the count will not be updated for this episode at all and
the average temperature in the trip statistics record will be somewhat
higher than it should be.
Fixes: 7ef01f228c9f ("thermal/debugfs: Add thermal debugfs information for mitigation episodes")
Cc :6.8+ <[email protected]> # 6.8+ Signed-off-by: Rafael J. Wysocki <[email protected]>
ALSA: seq: ump: Fix conversion from MIDI2 to MIDI1 UMP messages
The conversion from MIDI2 to MIDI1 UMP messages had a leftover
artifact (superfluous bit shift), and this resulted in the bogus type
check, leading to empty outputs. Let's fix it.
Ai Chao [Fri, 19 Apr 2024 08:21:59 +0000 (16:21 +0800)]
ALSA: hda/realtek - Enable audio jacks of Haier Boyue G42 with ALC269VC
The Haier Boyue G42 with ALC269VC cannot detect the MIC of headset,
the line out and internal speaker until
ALC269VC_FIXUP_ACER_VCOPPERBOX_PINS quirk applied.
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two minor fixes: one in the core to improve the handling of warnings
and unconditionally clear the command flags when ending a request and
the other to add missing table values needed for bandwidth scaling in
qualcomm ufs"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: core: Fix handling of SCMD_FAIL_IF_RECOVERING
scsi: ufs: qcom: Add missing interconnect bandwidth values for Gear 5
Merge tag 'net-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"A little calmer than usual, probably just the timing of sub-tree PRs.
Including fixes from netfilter.
Current release - regressions:
- inet: bring NLM_DONE out to a separate recv() again, fix user space
which assumes multiple recv()s will happen and gets blocked forever
- drv: mlx5:
- restore mistakenly dropped parts in register devlink flow
- use channel mdev reference instead of global mdev instance for
coalescing
- acquire RTNL lock before RQs/SQs activation/deactivation
Previous releases - regressions:
- net: change maximum number of UDP segments to 128, fix virtio
compatibility with Windows peers
- usb: ax88179_178a: avoid writing the mac address before first
reading
Previous releases - always broken:
- sched: fix mirred deadlock on device recursion
- netfilter:
- br_netfilter: skip conntrack input hook for promisc packets
- fixes removal of duplicate elements in the pipapo set backend
- various fixes for abort paths and error handling
- af_unix: don't peek OOB data without MSG_OOB
- drv: flower: fix fragment flags handling in multiple drivers
- drv: ravb: fix jumbo frames and packet stats accounting
Misc:
- kselftest_harness: fix Clang warning about zero-length format
- tun: limit printing rate when illegal packet received by tun dev"
* tag 'net-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits)
net: ethernet: ti: am65-cpsw-nuss: cleanup DMA Channels before using them
net: usb: ax88179_178a: avoid writing the mac address before first reading
net: ravb: Fix RX byte accounting for jumbo packets
net: ravb: Fix GbEth jumbo packet RX checksum handling
net: ravb: Allow RX loop to move past DMA mapping errors
net: ravb: Count packets instead of descriptors in R-Car RX path
net: ethernet: mtk_eth_soc: fix WED + wifi reset
net:usb:qmi_wwan: support Rolling modules
selftests: kselftest_harness: fix Clang warning about zero-length format
net/sched: Fix mirred deadlock on device recursion
netfilter: nf_tables: fix memleak in map from abort path
netfilter: nf_tables: restore set elements when delete set fails
netfilter: nf_tables: missing iterator type in lookup walk
s390/ism: Properly fix receive message buffer allocation
net: dsa: mt7530: fix port mirroring for MT7988 SoC switch
net: dsa: mt7530: fix mirroring frames received on local port
tun: limit printing rate when illegal packet received by tun dev
ice: Fix checking for unsupported keys on non-tunnel device
ice: tc: allow zero flags in parsing tc flower
ice: tc: check src_vsi in case of traffic from VF
...
arm64/head: Disable MMU at EL2 before clearing HCR_EL2.E2H
Even though the boot protocol stipulates otherwise, an exception has
been made for the EFI stub, and entering the core kernel with the MMU
enabled is permitted. This allows a substantial amount of cache
maintenance to be elided, wich is significant when fast boot times are
critical (e.g., for booting micro-VMs)
Once the initial ID map has been populated, the MMU is disabled as part
of the logic sequence that puts all system registers into a known state.
Any code that needs to execute within the window where the MMU is off is
cleaned to the PoC explicitly, which includes all of HYP text when
entering at EL2.
However, the current sequence of initializing the EL2 system registers
is not safe: HCR_EL2 is set to its nVHE initial state before SCTLR_EL2
is reprogrammed, and this means that a VHE-to-nVHE switch may occur
while the MMU is enabled. This switch causes some system registers as
well as page table descriptors to be interpreted in a different way,
potentially resulting in spurious exceptions relating to MMU
translation.
So disable the MMU explicitly first when entering in EL2 with the MMU
and caches enabled.
arm64/head: Drop unnecessary pre-disable-MMU workaround
The Falkor erratum that results in the need for an ISB before clearing
the M bit in SCTLR_ELx only applies to execution at exception level x,
and so the workaround is not needed when disabling the EL1 MMU while
running at EL2.
net: ethernet: ti: am65-cpsw-nuss: cleanup DMA Channels before using them
The TX and RX DMA Channels used by the driver to exchange data with CPSW
are not guaranteed to be in a clean state during driver initialization.
The Bootloader could have used the same DMA Channels without cleaning them
up in the event of failure. Thus, reset and disable the DMA Channels to
ensure that they are in a clean state before using them.
net: usb: ax88179_178a: avoid writing the mac address before first reading
After the commit d2689b6a86b9 ("net: usb: ax88179_178a: avoid two
consecutive device resets"), reset operation, in which the default mac
address from the device is read, is not executed from bind operation and
the random address, that is pregenerated just in case, is direclty written
the first time in the device, so the default one from the device is not
even read. This writing is not dangerous because is volatile and the
default mac address is not missed.
In order to avoid this and keep the simplification to have only one
reset and reduce the delays, restore the reset from bind operation and
remove the reset that is commanded from open operation. The behavior is
the same but everything is ready for usbnet_probe.
Tested with ASIX AX88179 USB Gigabit Ethernet devices.
Restore the old behavior for the rest of possible devices because I don't
have the hardware to test.
Merge tag 'random-6.9-rc5-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator fixes from Jason Donenfeld:
- The input subsystem contributes entropy in some places where a
spinlock is held, but the entropy accounting code only handled
callers being in an interrupt or non-atomic process context, but not
atomic process context. We fix this by removing an optimization and
just calling queue_work() unconditionally.
- Greg accidently sent up a patch not intended for his tree and that
had been nack'd, so that's now reverted.
* tag 'random-6.9-rc5-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
Revert "vmgenid: emit uevent when VMGENID updates"
random: handle creditable entropy from atomic process context
block: propagate partition scanning errors to the BLKRRPART ioctl
Commit 4601b4b130de ("block: reopen the device in blkdev_reread_part")
lost the propagation of I/O errors from the low-level read of the
partition table to the user space caller of the BLKRRPART.
Apparently some user space relies on, so restore the propagation. This
isn't exactly pretty as other block device open calls explicitly do not
are about these errors, so add a new BLK_OPEN_STRICT_SCAN to opt into
the error propagation.
Eric Biggers [Wed, 17 Apr 2024 06:04:34 +0000 (23:04 -0700)]
x86/cpufeatures: Fix dependencies for GFNI, VAES, and VPCLMULQDQ
Fix cpuid_deps[] to list the correct dependencies for GFNI, VAES, and
VPCLMULQDQ. These features don't depend on AVX512, and there exist CPUs
that support these features but not AVX512. GFNI actually doesn't even
depend on AVX.
This prevents GFNI from being unnecessarily disabled if AVX is disabled
to mitigate the GDS vulnerability.
This also prevents all three features from being unnecessarily disabled
if AVX512VL (or its dependency AVX512F) were to be disabled, but it
looks like there isn't any case where this happens anyway.
The DWC3_EP_RESOURCE_ALLOCATED flag ensures that the resource of an
endpoint is only assigned once. Unless the endpoint is reset, don't
clear this flag. Otherwise we may set endpoint resource again, which
prevents the driver from initiate transfer after handling a STALL or
endpoint halt to the control endpoint.
- x86/intel-uncore-freq: Bump minor version to avoid "unsupported" message
- amd/pmc: New BIOS version still needs Spurious IRQ1 quirk
* tag 'platform-drivers-x86-v6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/amd/pmc: Extend Framework 13 quirk to more BIOSes
platform/x86/intel-uncore-freq: Increase minor number support
platform/x86: ISST: Add Granite Rapids-D to HPM CPU list
platform/x86/amd: pmf: Add quirk for ROG Zephyrus G14
platform/x86/amd: pmf: Add infrastructure for quirking supported funcs
platform/x86/amd: pmf: Decrease error message to debug
Revert "vmgenid: emit uevent when VMGENID updates"
This reverts commit ad6bcdad2b6724e113f191a12f859a9e8456b26d. I had
nak'd it, and Greg said on the thread that it links that he wasn't going
to take it either, especially since it's not his code or his tree, but
then, seemingly accidentally, it got pushed up some months later, in
what looks like a mistake, with no further discussion in the linked
thread. So revert it, since it's clearly not intended.
Paolo Abeni [Thu, 18 Apr 2024 11:12:36 +0000 (13:12 +0200)]
Merge tag 'nf-24-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
Patch #1 amends a missing spot where the set iterator type is unset.
This is fixing a issue in the previous pull request.
Patch #2 fixes the delete set command abort path by restoring state
of the elements. Reverse logic for the activate (abort) case
otherwise element state is not restored, this requires to move
the check for active/inactive elements to the set iterator
callback. From the deactivate path, toggle the next generation
bit and from the activate (abort) path, clear the next generation
bitmask.
Patch #3 skips elements already restored by delete set command from the
abort path in case there is a previous delete element command in
the batch. Check for the next generation bit just like it is done
via set iteration to restore maps.
netfilter pull request 24-04-18
* tag 'nf-24-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: fix memleak in map from abort path
netfilter: nf_tables: restore set elements when delete set fails
netfilter: nf_tables: missing iterator type in lookup walk
====================
These patches fix bugs found during recent work on the ravb driver.
Patches 1 & 2 affect the R-Car code paths so have been tested on an
R-Car M3N Salvator-XS board - this is the only R-Car board I currently
have access to.
Patches 2, 3 & 4 affect the GbEth code paths so have been tested on
RZ/G2L and RZ/G2UL SMARC EVK boards.
Changes v2->v3:
* Incorporate feedback from Niklas and add Reviewed-by tag to patch
"net: ravb: Count packets instead of descriptors in R-Car RX path".
Changes v1->v2:
* Fixed typos in commit message of patch
"net: ravb: Allow RX loop to move past DMA mapping errors".
* Added Sergey's Reviewed-by tags.
* Expanded Cc list as Patchwork complained that I had missed people.
* Trimmed the call trace in accordance with the docs [1] in patch
"net: ravb: Fix GbEth jumbo packet RX checksum handling".
Paul Barker [Tue, 16 Apr 2024 12:02:54 +0000 (13:02 +0100)]
net: ravb: Fix RX byte accounting for jumbo packets
The RX byte accounting for jumbo packets was changed to fix a potential
use-after-free bug. However, that fix used the wrong variable and so
only accounted for the number of bytes in the final descriptor, not the
number of bytes in the whole packet.
To fix this, we can simply update our stats with the correct number of
bytes before calling napi_gro_receive().
Also rename pkt_len to desc_len in ravb_rx_gbeth() to avoid any future
confusion. The variable name pkt_len is correct in ravb_rx_rcar() as
that function does not handle packets spanning multiple descriptors.
Fixes: 5a5a3e564de6 ("ravb: Fix potential use-after-free in ravb_rx_gbeth()") Signed-off-by: Paul Barker <[email protected]> Reviewed-by: Sergey Shtylyov <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
Sending a 7kB ping packet to the RZ/G2L in v6.9-rc2 causes the following
backtrace:
WARNING: CPU: 0 PID: 0 at include/linux/skbuff.h:3127 skb_trim+0x30/0x38
Hardware name: Renesas SMARC EVK based on r9a07g044l2 (DT)
pc : skb_trim+0x30/0x38
lr : ravb_rx_csum_gbeth+0x40/0x90
Call trace:
skb_trim+0x30/0x38
ravb_rx_gbeth+0x56c/0x5cc
ravb_poll+0xa0/0x204
__napi_poll+0x38/0x17c
This is caused by ravb_rx_gbeth() calling ravb_rx_csum_gbeth() with the
wrong skb for a packet which spans multiple descriptors. To fix this,
use the correct skb.
Fixes: c2da9408579d ("ravb: Add Rx checksum offload support for GbEth") Signed-off-by: Paul Barker <[email protected]> Reviewed-by: Sergey Shtylyov <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
Paul Barker [Tue, 16 Apr 2024 12:02:52 +0000 (13:02 +0100)]
net: ravb: Allow RX loop to move past DMA mapping errors
The RX loops in ravb_rx_gbeth() and ravb_rx_rcar() skip to the next loop
iteration if a zero-length descriptor is seen (indicating a DMA mapping
error). However, the current RX descriptor index `priv->cur_rx[q]` was
incremented at the end of the loop and so would not be incremented when
we skip to the next loop iteration. This would cause the loop to keep
seeing the same zero-length descriptor instead of moving on to the next
descriptor.
As the loop counter `i` still increments, the loop would eventually
terminate so there is no risk of being stuck here forever - but we
should still fix this to avoid wasting cycles.
To fix this, the RX descriptor index is incremented at the top of the
loop, in the for statement itself. The assignments of `entry` and `desc`
are brought into the loop to avoid the need for duplication.
Paul Barker [Tue, 16 Apr 2024 12:02:51 +0000 (13:02 +0100)]
net: ravb: Count packets instead of descriptors in R-Car RX path
The units of "work done" in the RX path should be packets instead of
descriptors.
Descriptors which are used by the hardware to record error conditions or
are empty in the case of a DMA mapping error should not count towards
our RX work budget.
Also make the limit variable unsigned as it can never be negative.
Add a FRED-specific INT80 handler and document why it differs from the
current one. Eventually, the common bits will be unified once FRED hw is
available and it turns out that no further changes are needed but for
now, keep the handlers separate for everyone's sanity's sake.
Update the USB serial option driver to support Longsung U8300/U9300.
For U8300
Interface 4 is used by for QMI interface in stock firmware of U8300, the
router which uses U8300 modem.
Interface 5 is used by for ADB interface in stock firmware of U8300, the
router which uses U8300 modem.
Interface mapping is:
0: unknown (Debug), 1: AT (Modem), 2: AT, 3: PPP (NDIS / Pipe), 4: QMI, 5: ADB
Interface 1 is used by for ADB interface in stock firmware of U9300, the
router which uses U9300 modem.
Interface 4 is used by for QMI interface in stock firmware of U9300, the
router which uses U9300 modem.
Interface mapping is:
0: ADB, 1: AT (Modem), 2: AT, 3: PPP (NDIS / Pipe), 4: QMI
Note: Interface 3 of some models of the U9300 series can send AT commands.
ALSA: hda/realtek: Fix volumn control of ThinkBook 16P Gen4
change HDA & AMP configuration from ALC287_FIXUP_CS35L41_I2C_2 to
ALC287_FIXUP_MG_RTKC_CSAMP_CS35L41_I2C_THINKPAD for ThinkBook 16P Gen4
models to fix volumn control issue (cannot fully mute).
ALSA: hda/realtek: Fixes for Asus GU605M and GA403U sound
Added the correct pin table for Asus GU605M and GA403U, enabling all
speakers to be controlled with the master.
Updated quirks for GU605M and GA403U by including the pin table patch
in the chain.
projects / linux.git / log