Darrick J. Wong [Thu, 20 Oct 2022 23:26:36 +0000 (16:26 -0700)]
xfs: fix memcpy fortify errors in RUI log format copying
Starting in 6.1, CONFIG_FORTIFY_SOURCE checks the length parameter of
memcpy. Since we're already fixing problems with BUI item copying, we
should fix it everything else.
Refactor the xfs_rui_copy_format function to handle the copying of the
head and the flex array members separately. While we're at it, fix a
minor validation deficiency in the recovery function.
Darrick J. Wong [Thu, 20 Oct 2022 23:23:16 +0000 (16:23 -0700)]
xfs: fix memcpy fortify errors in CUI log format copying
Starting in 6.1, CONFIG_FORTIFY_SOURCE checks the length parameter of
memcpy. Since we're already fixing problems with BUI item copying, we
should fix it everything else.
Refactor the xfs_cui_copy_format function to handle the copying of the
head and the flex array members separately. While we're at it, fix a
minor validation deficiency in the recovery function.
Darrick J. Wong [Thu, 20 Oct 2022 23:17:41 +0000 (16:17 -0700)]
xfs: fix memcpy fortify errors in BUI log format copying
Starting in 6.1, CONFIG_FORTIFY_SOURCE checks the length parameter of
memcpy. Unfortunately, it doesn't handle flex arrays correctly:
------------[ cut here ]------------
memcpy: detected field-spanning write (size 48) of single field "dst_bui_fmt" at fs/xfs/xfs_bmap_item.c:628 (size 16)
Fix this by refactoring the xfs_bui_copy_format function to handle the
copying of the head and the flex array members separately. While we're
at it, fix a minor validation deficiency in the recovery function.
Darrick J. Wong [Thu, 20 Oct 2022 23:08:11 +0000 (16:08 -0700)]
xfs: fix validation in attr log item recovery
Before we start fixing all the complaints about memcpy'ing log items
around, let's fix some inadequate validation in the xattr log item
recovery code and get rid of the (now trivial) copy_format function.
Filipe Manana [Fri, 28 Oct 2022 12:15:35 +0000 (13:15 +0100)]
btrfs: fix lost file sync on direct IO write with nowait and dsync iocb
When doing a direct IO write using a iocb with nowait and dsync set, we
end up not syncing the file once the write completes.
This is because we tell iomap to not call generic_write_sync(), which
would result in calling btrfs_sync_file(), in order to avoid a deadlock
since iomap can call it while we are holding the inode's lock and
btrfs_sync_file() needs to acquire the inode's lock. The deadlock happens
only if the write happens synchronously, when iomap_dio_rw() calls
iomap_dio_complete() before it returns. Instead we do the sync ourselves
at btrfs_do_write_iter().
For a nowait write however we can end up not doing the sync ourselves at
at btrfs_do_write_iter() because the write could have been queued, and
therefore we get -EIOCBQUEUED returned from iomap in such case. That makes
us skip the sync call at btrfs_do_write_iter(), as we don't do it for
any error returned from btrfs_direct_write(). We can't simply do the call
even if -EIOCBQUEUED is returned, since that would block the task waiting
for IO, both for the data since there are bios still in progress as well
as potentially blocking when joining a log transaction and when syncing
the log (writing log trees, super blocks, etc).
So let iomap do the sync call itself and in order to avoid deadlocks for
the case of synchronous writes (without nowait), use __iomap_dio_rw() and
have ourselves call iomap_dio_complete() after unlocking the inode.
A test case will later be sent for fstests, after this is fixed in Linus'
tree.
Darrick J. Wong [Mon, 24 Oct 2022 17:11:02 +0000 (10:11 -0700)]
xfs: fix incorrect return type for fsdax fault handlers
The kernel robot complained about this:
>> fs/xfs/xfs_file.c:1266:31: sparse: sparse: incorrect type in return expression (different base types) @@ expected int @@ got restricted vm_fault_t @@
fs/xfs/xfs_file.c:1266:31: sparse: expected int
fs/xfs/xfs_file.c:1266:31: sparse: got restricted vm_fault_t
fs/xfs/xfs_file.c:1314:21: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted vm_fault_t [usertype] ret @@ got int @@
fs/xfs/xfs_file.c:1314:21: sparse: expected restricted vm_fault_t [usertype] ret
fs/xfs/xfs_file.c:1314:21: sparse: got int
Fix the incorrect return type for these two functions.
While we're at it, make the !fsdax version return VM_FAULT_SIGBUS
because a zero return value will cause some callers to try to lock
vmf->page, which we never set here.
Fixes: ea6c49b784f0 ("xfs: support CoW in fsdax mode") Signed-off-by: Darrick J. Wong <[email protected]> Reviewed-by: Dave Chinner <[email protected]>
Helge Deller [Fri, 28 Oct 2022 16:12:49 +0000 (18:12 +0200)]
parisc: Avoid printing the hardware path twice
Avoid that the hardware path is shown twice in the kernel log, and clean
up the output of the version numbers to show up in the same order as
they are listed in the hardware database in the hardware.c file.
Additionally, optimize the memory footprint of the hardware database
and mark some code as init code.
That is because q->ma_ops is set to NULL before blk_release_queue is
called.
blk_mq_init_queue_data
blk_mq_init_allocated_queue
blk_mq_realloc_hw_ctxs
for (i = 0; i < set->nr_hw_queues; i++) {
old_hctx = xa_load(&q->hctx_table, i);
if (!blk_mq_alloc_and_init_hctx(.., i, ..)) [1]
if (!old_hctx)
break;
blk_put_queue
blk_release_queue
if (queue_is_mq(q)) [5]
blk_mq_release(q);
[1]: blk_mq_alloc_and_init_hctx failed at i != 0.
[2]: The hctxs allocated by [1] are moved to q->unused_hctx_list and
will be cleaned up in blk_mq_release.
[3]: q->nr_hw_queues is 0.
[4]: Set q->mq_ops to NULL.
[5]: queue_is_mq returns false due to [4]. And blk_mq_release
will not be called. The hctxs in q->unused_hctx_list are leaked.
To fix it, call blk_release_queue in exception path.
Since commit a5810f551d0a ("drm/i915: Allow more varied alternate
fixed modes for panels") intel_panel_add_edid_alt_fixed_modes()
no longer considers vrr vs. drrs separately. So no reason to
pass them as separate parameters either.
So rq_qos_exit() is called to free the rq_wb memory for wbt_init().
However in the error path of device_add_disk(), only
blk_unregister_queue() is called and make rq_wb memory leaked.
Ming Lei [Sat, 29 Oct 2022 01:04:31 +0000 (09:04 +0800)]
ublk_drv: avoid to touch io_uring cmd in blk_mq io path
io_uring cmd is supposed to be used in ubq daemon context mainly,
and we should try to avoid to touch it in ublk io submission context,
otherwise this data could become shared between the two contexts,
and performance is hurt.
So link request into one per-queue list, and use same batching policy
of io_uring command, just avoid to touch ucmd in blk-mq io context.
Ming Lei [Sat, 29 Oct 2022 01:04:29 +0000 (09:04 +0800)]
ublk_drv: return flag of UBLK_F_URING_CMD_COMP_IN_TASK in case of module
UBLK_F_URING_CMD_COMP_IN_TASK needs to be set and returned to userspace
if ublk driver is built as module, otherwise userspace may get wrong
flags shown.
Ville Syrjälä [Wed, 26 Oct 2022 10:11:28 +0000 (13:11 +0300)]
drm/i915/sdvo: Setup DDC fully before output init
Call intel_sdvo_select_ddc_bus() before initializing any
of the outputs. And before that is functional (assuming no VBT)
we have to set up the controlled_outputs thing. Otherwise DDC
won't be functional during the output init but LVDS really
needs it for the fixed mode setup.
Note that the whole multi output support still looks very
bogus, and more work will be needed to make it correct.
But for now this should at least fix the LVDS EDID fixed mode
setup.
Ville Syrjälä [Wed, 26 Oct 2022 10:11:27 +0000 (13:11 +0300)]
drm/i915/sdvo: Filter out invalid outputs more sensibly
We try to filter out the corresponding xxx1 output
if the xxx0 output is not present. But the way that is
being done is pretty awkward. Make it less so.
Robert Beckett [Thu, 20 Oct 2022 11:03:08 +0000 (13:03 +0200)]
drm/i915: stop abusing swiotlb_max_segment
swiotlb_max_segment used to return either the maximum size that swiotlb
could bounce, or for Xen PV PAGE_SIZE even if swiotlb could bounce buffer
larger mappings. This made i915 on Xen PV work as it bypasses the
coherency aspect of the DMA API and can't cope with bounce buffering
and this avoided bounce buffering for the Xen/PV case.
So instead of adding this hack back, check for Xen/PV directly in i915
for the Xen case and otherwise use the proper DMA API helper to query
the maximum mapping size.
Replace swiotlb_max_segment() calls with dma_max_mapping_size().
In i915_gem_object_get_pages_internal() no longer consider max_segment
only if CONFIG_SWIOTLB is enabled. There can be other (iommu related)
causes of specific max segment sizes.
Imre Deak [Tue, 25 Oct 2022 11:44:55 +0000 (14:44 +0300)]
drm/i915/tgl+: Add locking around DKL PHY register accesses
Accessing the TypeC DKL PHY registers during modeset-commit,
-verification, DP link-retraining and AUX power well toggling is racy
due to these code paths being concurrent and the PHY register bank
selection register (HIP_INDEX_REG) being shared between PHY instances
(aka TC ports) and the bank selection being not atomic wrt. the actual
PHY register access.
Add the required locking around each PHY register bank selection->
register access sequence.
Kudos to Ville for noticing the race conditions.
v2:
- Add the DKL PHY register accessors to intel_dkl_phy.[ch]. (Jani)
- Make the DKL_REG_TC_PORT macro independent of PHY internals.
- Move initing the DKL PHY lock to a more logical place.
v3:
- Fix parameter reuse in the DKL_REG_TC_PORT definition.
- Document the usage of phy_lock.
v4:
- Fix adding TC_PORT_1 offset in the DKL_REG_TC_PORT definition.
Dan Carpenter [Fri, 28 Oct 2022 15:05:00 +0000 (18:05 +0300)]
net: sched: Fix use after free in red_enqueue()
We can't use "skb" again after passing it to qdisc_enqueue(). This is
basically identical to commit 2f09707d0c97 ("sch_sfb: Also store skb
len before calling child enqueue").
Sergey Shtylyov [Fri, 28 Oct 2022 21:07:06 +0000 (00:07 +0300)]
ata: pata_legacy: fix pdc20230_set_piomode()
Clang gives a warning when compiling pata_legacy.c with 'make W=1' about
the 'rt' local variable in pdc20230_set_piomode() being set but unused.
Quite obviously, there is an outb() call missing to write back the updated
variable. Moreover, checking the docs by Petr Soucek revealed that bitwise
AND should have been done with a negated timing mask and the master/slave
timing masks were swapped while updating...
Fixes: 669a5db411d8 ("[libata] Add a bunch of PATA drivers.") Reported-by: Damien Le Moal <[email protected]> Signed-off-by: Sergey Shtylyov <[email protected]> Signed-off-by: Damien Le Moal <[email protected]>
Hector Martin [Thu, 27 Oct 2022 13:57:11 +0000 (22:57 +0900)]
drm/format-helper: Only advertise supported formats for conversion
drm_fb_build_fourcc_list() currently returns all emulated formats
unconditionally as long as the native format is among them, even though
not all combinations have conversion helpers. Although the list is
arguably provided to userspace in precedence order, userspace can pick
something out-of-order (and thus break when it shouldn't), or simply
only support a format that is unsupported (and thus think it can work,
which results in the appearance of a hang as FB blits fail later on,
instead of the initialization error you'd expect in this case).
Add checks to filter the list of emulated formats to only those
supported for conversion to the native format. This presumes that there
is a single native format (only the first is checked, if there are
multiple). Refactoring this API to drop the native list or support it
properly (by returning the appropriate emulated->native mapping table)
is left for a future patch.
The simpledrm driver is left as-is with a full table of emulated
formats. This keeps all currently working conversions available and
drops all the broken ones (i.e. this a strict bugfix patch, adding no
new supported formats nor removing any actually working ones). In order
to avoid proliferation of emulated formats, future drivers should
advertise only XRGB8888 as the sole emulated format (since some
userspace assumes its presence).
This fixes a real user regression where the ?RGB2101010 support commit
started advertising it unconditionally where not supported, and KWin
decided to start to use it over the native format and broke, but also
the fixes the spurious RGB565/RGB888 formats which have been wrongly
unconditionally advertised since the dawn of simpledrm.
Michael Ellerman [Thu, 27 Oct 2022 12:56:26 +0000 (23:56 +1100)]
powerpc/64e: Fix amdgpu build on Book3E w/o AltiVec
There's a build failure for Book3E without AltiVec:
Error: cc1: error: AltiVec not supported in this target
make[6]: *** [/linux/scripts/Makefile.build:250:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o] Error 1
This happens because the amdgpu build is only gated by
PPC_LONG_DOUBLE_128, but that symbol can be enabled even though AltiVec
is disabled.
The only user of PPC_LONG_DOUBLE_128 is amdgpu, so just add a dependency
on AltiVec to that symbol to fix the build.
Michael Ellerman [Mon, 31 Oct 2022 06:37:21 +0000 (17:37 +1100)]
Merge tag 'v6.1-rc2' into fixes
Merge rc2 into our fixes branch, which was based on rc1 but wasn't
merged until rc3, so that for the remainder of the release our fixes
branch will be based on rc2 for the purposes of resolving conflicts with
other trees (if necessary).
David S. Miller [Sun, 30 Oct 2022 21:43:26 +0000 (21:43 +0000)]
Merge branch 'nfc-skb-leaks'
Shang XiaoJing says:
====================
nfc: Fix potential memory leak of skb
There are 6 kinds of send functions can be called by nci_send_frame():
virtual_nci_send(),
fdp_nci_send(),
nxp_nci_send(),
s3fwrn5_nci_send(),
nfcmrvl_nci_send(),
st_nci_send();
1. virtual_nci_send() will memleak the skb, and has been fixed before.
2. fdp_nci_send() won't free the skb no matter whether write() succeed.
3-4. nxp_nci_send() and s3fwrn5_nci_send() will only free the skb when
write() failed, however write() will not free the skb by itself for when
succeeds.
5. nfcmrvl_nci_send() will call nfcmrvl_XXX_nci_send(), where some of
them will free the skb, but nfcmrvl_i2c_nci_send() only free the skb
when i2c_master_send() return >=0, and memleak will happen when
i2c_master_send() failed in nfcmrvl_i2c_nci_send().
6. st_nci_send() will queue the skb into other list and finally be
freed.
Fix the potential memory leak of skb.
====================
Shang XiaoJing [Thu, 27 Oct 2022 14:03:32 +0000 (22:03 +0800)]
nfc: nfcmrvl: Fix potential memory leak in nfcmrvl_i2c_nci_send()
nfcmrvl_i2c_nci_send() will be called by nfcmrvl_nci_send(), and skb
should be freed in nfcmrvl_i2c_nci_send(). However, nfcmrvl_nci_send()
will only free skb when i2c_master_send() return >=0, which means skb
will memleak when i2c_master_send() failed. Free skb no matter whether
i2c_master_send() succeeds.
Fixes: b5b3e23e4cac ("NFC: nfcmrvl: add i2c driver") Signed-off-by: Shang XiaoJing <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Shang XiaoJing [Thu, 27 Oct 2022 14:03:31 +0000 (22:03 +0800)]
nfc: s3fwrn5: Fix potential memory leak in s3fwrn5_nci_send()
s3fwrn5_nci_send() will call s3fwrn5_i2c_write() or s3fwrn82_uart_write(),
and free the skb if write() failed. However, even if the write() run
succeeds, the skb will not be freed in write(). As the result, the skb
will memleak. s3fwrn5_nci_send() should also free the skb when write()
succeeds.
Fixes: c04c674fadeb ("nfc: s3fwrn5: Add driver for Samsung S3FWRN5 NFC Chip") Signed-off-by: Shang XiaoJing <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Shang XiaoJing [Thu, 27 Oct 2022 14:03:30 +0000 (22:03 +0800)]
nfc: nxp-nci: Fix potential memory leak in nxp_nci_send()
nxp_nci_send() will call nxp_nci_i2c_write(), and only free skb when
nxp_nci_i2c_write() failed. However, even if the nxp_nci_i2c_write()
run succeeds, the skb will not be freed in nxp_nci_i2c_write(). As the
result, the skb will memleak. nxp_nci_send() should also free the skb
when nxp_nci_i2c_write() succeeds.
Fixes: dece45855a8b ("NFC: nxp-nci: Add support for NXP NCI chips") Signed-off-by: Shang XiaoJing <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Shang XiaoJing [Thu, 27 Oct 2022 14:03:29 +0000 (22:03 +0800)]
nfc: fdp: Fix potential memory leak in fdp_nci_send()
fdp_nci_send() will call fdp_nci_i2c_write that will not free skb in
the function. As a result, when fdp_nci_i2c_write() finished, the skb
will memleak. fdp_nci_send() should free skb after fdp_nci_i2c_write()
finished.
Fixes: a06347c04c13 ("NFC: Add Intel Fields Peak NFC solution driver") Signed-off-by: Shang XiaoJing <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Linus Torvalds [Sun, 30 Oct 2022 18:31:14 +0000 (11:31 -0700)]
Merge tag 'fbdev-for-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
"A use-after-free bugfix in the smscufx driver and various minor error
path fixes, smaller build fixes, sysfs fixes and typos in comments in
the stifb, sisfb, da8xxfb, xilinxfb, sm501fb, gbefb and cyber2000fb
drivers"
* tag 'fbdev-for-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: cyber2000fb: fix missing pci_disable_device()
fbdev: sisfb: use explicitly signed char
fbdev: smscufx: Fix several use-after-free bugs
fbdev: xilinxfb: Make xilinxfb_release() return void
fbdev: sisfb: fix repeated word in comment
fbdev: gbefb: Convert sysfs snprintf to sysfs_emit
fbdev: sm501fb: Convert sysfs snprintf to sysfs_emit
fbdev: stifb: Fall back to cfb_fillrect() on 32-bit HCRX cards
fbdev: da8xx-fb: Fix error handling in .remove()
fbdev: MIPS supports iomem addresses
Linus Torvalds [Sun, 30 Oct 2022 17:35:07 +0000 (10:35 -0700)]
Merge tag 'usb-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"A few small USB fixes for 6.1-rc3. Include in here are:
- MAINTAINERS update, including a big one for the USB gadget
subsystem. Many thanks to Felipe for all of the years of hard work
he has done on this codebase, it was greatly appreciated.
- dwc3 driver fixes for reported problems.
- xhci driver fixes for reported problems.
- typec driver fixes for minor issues
- uvc gadget driver change, and then revert as it wasn't relevant for
6.1-final, as it is a new feature and people are still reviewing
and modifying it.
All of these have been in the linux-next tree with no reported issues"
* tag 'usb-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: dwc3: gadget: Don't set IMI for no_interrupt
usb: dwc3: gadget: Stop processing more requests on IMI
Revert "usb: gadget: uvc: limit isoc_sg to super speed gadgets"
xhci: Remove device endpoints from bandwidth list when freeing the device
xhci-pci: Set runtime PM as default policy on all xHC 1.2 or later devices
xhci: Add quirk to reset host back to default state at shutdown
usb: xhci: add XHCI_SPURIOUS_SUCCESS to ASM1042 despite being a V0.96 controller
usb: dwc3: st: Rely on child's compatible instead of name
usb: gadget: uvc: limit isoc_sg to super speed gadgets
usb: bdc: change state when port disconnected
usb: typec: ucsi: acpi: Implement resume callback
usb: typec: ucsi: Check the connection on resume
usb: gadget: aspeed: Fix probe regression
usb: gadget: uvc: fix sg handling during video encode
usb: gadget: uvc: fix sg handling in error case
usb: gadget: uvc: fix dropped frame after missed isoc
usb: dwc3: gadget: Don't delay End Transfer on delayed_status
usb: dwc3: Don't switch OTG -> peripheral if extcon is present
MAINTAINERS: Update maintainers for broadcom USB
MAINTAINERS: move USB gadget and phy entries under the main USB entry
Linus Torvalds [Sun, 30 Oct 2022 17:21:42 +0000 (10:21 -0700)]
Merge tag 'gpio-fixes-for-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- convert gpio-tegra to using an immutable irqchip
- MAINTAINERS update
* tag 'gpio-fixes-for-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: Change myself to a maintainer
gpio: tegra: Convert to immutable irq chip
Linus Torvalds [Sun, 30 Oct 2022 16:49:18 +0000 (09:49 -0700)]
Merge tag 'perf_urgent_for_v6.1_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Rename a perf memory level event define to denote it is of CXL type
- Add Alder and Raptor Lakes support to RAPL
- Make sure raw sample data is output with tracepoints
* tag 'perf_urgent_for_v6.1_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/mem: Rename PERF_MEM_LVLNUM_EXTN_MEM to PERF_MEM_LVLNUM_CXL
perf/x86/rapl: Add support for Intel Raptor Lake
perf/x86/rapl: Add support for Intel AlderLake-N
perf: Fix missing raw data on tracepoint events
Linus Torvalds [Sun, 30 Oct 2022 16:44:06 +0000 (09:44 -0700)]
Merge tag 'loongarch-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Remove unused kernel stack padding, fix some build errors/warnings and
two bugs in laptop platform driver"
* tag 'loongarch-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
platform/loongarch: laptop: Fix possible UAF and simplify generic_acpi_laptop_init()
platform/loongarch: laptop: Adjust resume order for loongson_hotkey_resume()
LoongArch: BPF: Avoid declare variables in switch-case
LoongArch: Use flexible-array member instead of zero-length array
LoongArch: Remove unused kernel stack padding
Linus Torvalds [Sun, 30 Oct 2022 16:40:04 +0000 (09:40 -0700)]
Merge tag '6.1-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
- use after free fix for reconnect race
- two memory leak fixes
* tag '6.1-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix use-after-free caused by invalid pointer `hostname`
cifs: Fix pages leak when writedata alloc failed in cifs_write_from_iter()
cifs: Fix pages array leak when writedata alloc failed in cifs_writedata_alloc()
Li Zhijian [Thu, 1 Sep 2022 03:17:34 +0000 (03:17 +0000)]
selftests: pidfd: Fix compling warnings
Fix warnings and enable Wall.
pidfd_wait.c: In function ‘wait_nonblock’:
pidfd_wait.c:150:13: warning: unused variable ‘status’ [-Wunused-variable]
150 | int pidfd, status = 0;
| ^~~~~~
...
pidfd_test.c: In function ‘child_poll_exec_test’:
pidfd_test.c:438:1: warning: no return statement in function returning non-void [-Wreturn-type]
438 | }
| ^
Li Zhijian [Thu, 1 Sep 2022 03:10:07 +0000 (03:10 +0000)]
ksefltests: pidfd: Fix wait_states: Test terminated by timeout
0Day/LKP observed that the kselftest blocks forever since one of the
pidfd_wait doesn't terminate in 1 of 30 runs. After digging into
the source, we found that it blocks at:
ASSERT_EQ(sys_waitid(P_PIDFD, pidfd, &info, WCONTINUED, NULL), 0);
wait_states has below testing flow:
CHILD PARENT
---------------+--------------
1 STOP itself
2 WAIT for CHILD STOPPED
3 SIGNAL CHILD to CONT
4 CONT
5 STOP itself
5' WAIT for CHILD CONT
6 WAIT for CHILD STOPPED
The problem is that the kernel cannot ensure the order of 5 and 5', once
5 goes first, the test will fail.
we can reproduce it by:
$ while true; do make run_tests -C pidfd; done
Introduce a blocking read in child process to make sure the parent can
check its WCONTINUED.
Linus Torvalds [Sun, 30 Oct 2022 01:33:03 +0000 (18:33 -0700)]
Merge tag 'random-6.1-rc3-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator fix from Jason Donenfeld:
"One fix from Jean-Philippe Brucker, addressing a regression in which
early boot code on ARM64 would use the non-_early variant of the
arch_get_random family of functions, resulting in the architectural
random number generator appearing unavailable during that early phase
of boot.
The fix simply changes arch_get_random*() to arch_get_random*_early().
This distinction between these two functions is a bit of an old wart
I'm not a fan of, and for 6.2 I'll see if I can make obsolete the
_early variant, so that one function does the right thing in all
contexts without overhead"
* tag 'random-6.1-rc3-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
random: use arch_get_random*_early() in random_init()
Linus Torvalds [Sun, 30 Oct 2022 01:12:45 +0000 (18:12 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Varions small fixes, all in drivers.
Some of these arrived during the merge window and got held over to
make sure of testing on the -rc tree.
The biggest change is for standards conformance in the target driver,
closely followed by a set of bug fixes in megaraid_sas"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (21 commits)
scsi: ufs: core: Fix typo in comment
scsi: mpi3mr: Select CONFIG_SCSI_SAS_ATTRS
scsi: ufs: core: Fix typo for register name in comments
scsi: pm80xx: Display proc_name in sysfs
scsi: ufs: core: Fix the error log in ufshcd_query_flag_retry()
scsi: ufs: core: Remove unneeded casts from void *
scsi: lpfc: Fix spelling mistake "unsolicted" -> "unsolicited"
scsi: qla2xxx: Use transport-defined speed mask for supported_speeds
scsi: target: iblock: Fold iblock_emulate_read_cap_with_block_size() into iblock_get_blocks()
scsi: qla2xxx: Fix serialization of DCBX TLV data request
scsi: ufs: qcom: Remove redundant dev_err() call
scsi: megaraid_sas: Move megasas_dbg_lvl init to megasas_init()
scsi: megaraid_sas: Remove unnecessary memset()
scsi: megaraid_sas: Simplify megasas_update_device_list
scsi: megaraid_sas: Correct an error message
scsi: megaraid_sas: Correct value passed to scsi_device_lookup()
scsi: target: core: UA on all LUNs after reset
scsi: target: core: New key must be used for moved PR
scsi: target: core: Abort all preempted regs if requested
scsi: target: core: Fix memory leak in preempt_and_abort
...
Linus Torvalds [Sun, 30 Oct 2022 01:06:52 +0000 (18:06 -0700)]
Merge tag 'block-6.1-2022-10-28' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- make the multipath dma alignment match the non-multipath one
(Keith Busch)
- fix a bogus use of sg_init_marker() (Nam Cao)
- fix circulr locking in nvme-tcp (Sagi Grimberg)
- Initialization fix for requests allocated via the special hw queue
allocator (John)
- Fix for a regression added in this release with the batched
completions of end_io backed requests (Ming)
- Error handling leak fix for rbd (Yang)
- Error handling leak fix for add_disk() failure (Yu)
* tag 'block-6.1-2022-10-28' of git://git.kernel.dk/linux:
blk-mq: Properly init requests from blk_mq_alloc_request_hctx()
blk-mq: don't add non-pt request with ->end_io to batch
rbd: fix possible memory leak in rbd_sysfs_init()
nvme-multipath: set queue dma alignment to 3
nvme-tcp: fix possible circular locking when deleting a controller under memory pressure
nvme-tcp: replace sg_init_marker() with sg_init_table()
block: fix memory leak for elevator on add_disk failure
Linus Torvalds [Sun, 30 Oct 2022 01:01:16 +0000 (18:01 -0700)]
Merge tag 'io_uring-6.1-2022-10-28' of git://git.kernel.dk/linux
Pull io_uring fix from Jens Axboe:
"Just a fix for a locking regression introduced with the deferred
task_work running from this merge window"
* tag 'io_uring-6.1-2022-10-28' of git://git.kernel.dk/linux:
io_uring: unlock if __io_run_local_work locked inside
io_uring: use io_run_local_work_locked helper
Linus Torvalds [Sun, 30 Oct 2022 00:49:33 +0000 (17:49 -0700)]
Merge tag 'mm-hotfixes-stable-2022-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"Eight fix pre-6.0 bugs and the remainder address issues which were
introduced in the 6.1-rc merge cycle, or address issues which aren't
considered sufficiently serious to warrant a -stable backport"
* tag 'mm-hotfixes-stable-2022-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (23 commits)
mm: multi-gen LRU: move lru_gen_add_mm() out of IRQ-off region
lib: maple_tree: remove unneeded initialization in mtree_range_walk()
mmap: fix remap_file_pages() regression
mm/shmem: ensure proper fallback if page faults
mm/userfaultfd: replace kmap/kmap_atomic() with kmap_local_page()
x86: fortify: kmsan: fix KMSAN fortify builds
x86: asm: make sure __put_user_size() evaluates pointer once
Kconfig.debug: disable CONFIG_FRAME_WARN for KMSAN by default
x86/purgatory: disable KMSAN instrumentation
mm: kmsan: export kmsan_copy_page_meta()
mm: migrate: fix return value if all subpages of THPs are migrated successfully
mm/uffd: fix vma check on userfault for wp
mm: prep_compound_tail() clear page->private
mm,madvise,hugetlb: fix unexpected data loss with MADV_DONTNEED on hugetlbfs
mm/page_isolation: fix clang deadcode warning
fs/ext4/super.c: remove unused `deprecated_msg'
ipc/msg.c: fix percpu_counter use after free
memory tier, sysfs: rename attribute "nodes" to "nodelist"
MAINTAINERS: git://github.com -> https://github.com for nilfs2
mm/kmemleak: prevent soft lockup in kmemleak_scan()'s object iteration loops
...
Linus Torvalds [Sat, 29 Oct 2022 17:35:17 +0000 (10:35 -0700)]
Merge tag 'powerpc-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix a case of rescheduling with user access unlocked, when preempt is
enabled.
- A follow-up fix for a recent fix, which could lead to IRQ state
assertions firing incorrectly.
- Two fixes for lockdep warnings seen when using kfence with the Hash
MMU.
- Two fixes for preempt warnings seen when using the Hash MMU.
- Two fixes for the VAS coprocessor mechanism used on pseries.
- Prevent building some of our older KVM backends when
CONTEXT_TRACKING_USER is enabled, as it's known to cause crashes.
- A couple of fixes for issues seen with PMU NMIs.
Thanks to Nicholas Piggin, Guenter Roeck, Frederic Barrat Haren Myneni,
Sachin Sant, and Samuel Holland.
* tag 'powerpc-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s/interrupt: Fix clear of PACA_IRQS_HARD_DIS when returning to soft-masked context
powerpc/64s/interrupt: Perf NMI should not take normal exit path
powerpc/64/interrupt: Prevent NMI PMI causing a dangerous warning
KVM: PPC: BookS PR-KVM and BookE do not support context tracking
powerpc: Fix reschedule bug in KUAP-unlocked user copy
powerpc/64s: Fix hash__change_memory_range preemption warning
powerpc/64s: Disable preemption in hash lazy mmu mode
powerpc/64s: make linear_map_hash_lock a raw spinlock
powerpc/64s: make HPTE lock and native_tlbie_lock irq-safe
powerpc/64s: Add lockdep for HPTE lock
powerpc/pseries: Use lparcfg to reconfig VAS windows for DLPAR CPU
powerpc/pseries/vas: Add VAS IRQ primary handler
Michael Tretter [Fri, 28 Oct 2022 09:52:06 +0000 (11:52 +0200)]
drm/rockchip: vop2: disable planes when disabling the crtc
The vop2 driver needs to explicitly disable the planes if the crtc is
disabled. Unless the planes are explicitly disabled, the address of the
last framebuffer is kept in the registers of the VOP2. When re-enabling
the encoder after it has been disabled by the driver, the VOP2 will
start and read the framebuffer that has been freed but is still pointed
to by the register. The iommu will catch these read accesses and print
errors.
Explicitly disable the planes when the crtc is disabled to reset the
registers.
Michael Tretter [Fri, 28 Oct 2022 09:52:05 +0000 (11:52 +0200)]
drm/rockchip: vop2: fix null pointer in plane_atomic_disable
If the vop2_plane_atomic_disable function is called with NULL as a
state, accessing the old_pstate runs into a null pointer exception.
However, the drm_atomic_helper_disable_planes_on_crtc function calls the
atomic_disable callback with state NULL.
Allow to disable a plane without passing a plane state by checking the
old_pstate only if a state is passed.
John Keeping [Thu, 20 Oct 2022 18:12:47 +0000 (19:12 +0100)]
drm/rockchip: fix fbdev on non-IOMMU devices
When switching to the generic fbdev infrastructure, it was missed that
framebuffers were created with the alloc_kmap parameter to
rockchip_gem_create_object() set to true. The generic infrastructure
calls this via the .dumb_create() driver operation and thus creates a
buffer without an associated kmap.
alloc_kmap only makes a difference on devices without an IOMMU, but when
it is missing rockchip_gem_prime_vmap() fails and the framebuffer cannot
be used.
Detect the case where a buffer is being allocated for the framebuffer
and ensure a kernel mapping is created in this case.
Brian Norris [Thu, 20 Oct 2022 00:03:49 +0000 (17:03 -0700)]
drm/rockchip: dsi: Force synchronous probe
We can't safely probe a dual-DSI display asynchronously
(driver_async_probe='*' or driver_async_probe='dw-mipi-dsi-rockchip'
cmdline), because dw_mipi_dsi_rockchip_find_second() pokes one DSI
device's drvdata from the other device without any locking.
Request synchronous probe, at least until this driver learns some
appropriate locking for dual-DSI initialization.
Brian Norris [Thu, 20 Oct 2022 00:03:48 +0000 (17:03 -0700)]
drm/rockchip: dsi: Clean up 'usage_mode' when failing to attach
If we fail to attach the first time (especially: EPROBE_DEFER), we fail
to clean up 'usage_mode', and thus will fail to attach on any subsequent
attempts, with "dsi controller already in use".
Re-set to DW_DSI_USAGE_IDLE on attach failure.
This is especially common to hit when enabling asynchronous probe on a
duel-DSI system (such as RK3399 Gru/Scarlet), such that we're more
likely to fail dw_mipi_dsi_rockchip_find_second() the first time.
When the avdd-0v9 or avdd-1v8 supply are not yet available, EPROBE_DEFER
is returned by rockchip_hdmi_parse_dt(). This causes the following error
message to be printed multiple times:
dwhdmi-rockchip fe0a0000.hdmi: [drm:dw_hdmi_rockchip_bind [rockchipdrm]] *ERROR* Unable to parse OF data
Fix that by not printing the message when rockchip_hdmi_parse_dt()
returns -EPROBE_DEFER.
Ioana Ciornei [Tue, 25 Oct 2022 14:41:17 +0000 (17:41 +0300)]
arm64: dts: ls208xa: specify clock frequencies for the MDIO controllers
Up until now, the external MDIO controller frequency values relied
either on the default ones out of reset or on those setup by u-boot.
Let's just properly specify the MDC frequency in the DTS so that even
without u-boot's intervention Linux can drive the MDIO bus.
Ioana Ciornei [Tue, 25 Oct 2022 14:41:16 +0000 (17:41 +0300)]
arm64: dts: ls1088a: specify clock frequencies for the MDIO controllers
Up until now, the external MDIO controller frequency values relied
either on the default ones out of reset or on those setup by u-boot.
Let's just properly specify the MDC frequency in the DTS so that even
without u-boot's intervention Linux can drive the MDIO bus.
Ioana Ciornei [Tue, 25 Oct 2022 14:41:15 +0000 (17:41 +0300)]
arm64: dts: lx2160a: specify clock frequencies for the MDIO controllers
Up until now, the external MDIO controller frequency values relied
either on the default ones out of reset or on those setup by u-boot.
Let's just properly specify the MDC frequency in the DTS so that even
without u-boot's intervention Linux can drive the MDIO bus.
Yang Yingliang [Sat, 29 Oct 2022 08:29:31 +0000 (16:29 +0800)]
platform/loongarch: laptop: Fix possible UAF and simplify generic_acpi_laptop_init()
Currently the return value of 'sub_driver->init' is not checked. If
sparse_keymap_setup() called in the init function fails, 'generic_
inputdev' is freed, then it will lead a UAF when using it in generic_
acpi_laptop_init(). Fix it by checking the return value and setting
generic_inputdev to NULL after free, so as to avoid double free it.
The error code in generic_subdriver_init() is always negative, so the
return of generic_subdriver_init() can be simplified.
Huacai Chen [Sat, 29 Oct 2022 08:29:31 +0000 (16:29 +0800)]
platform/loongarch: laptop: Adjust resume order for loongson_hotkey_resume()
Some laptops don't support SW_LID, but still have backlight control,
move backlight resuming before SW_LID event handling so as to avoid
backlight mistake due to early return.
Huacai Chen [Sat, 29 Oct 2022 08:29:31 +0000 (16:29 +0800)]
LoongArch: BPF: Avoid declare variables in switch-case
Not all compilers support declare variables in switch-case, so move
declarations to the beginning of a function. Otherwise we may get such
build errors:
arch/loongarch/net/bpf_jit.c: In function ‘emit_atomic’:
arch/loongarch/net/bpf_jit.c:362:3: error: a label can only be part of a statement and a declaration is not a statement
u8 r0 = regmap[BPF_REG_0];
^~
arch/loongarch/net/bpf_jit.c: In function ‘build_insn’:
arch/loongarch/net/bpf_jit.c:727:3: error: a label can only be part of a statement and a declaration is not a statement
u8 t7 = -1;
^~
arch/loongarch/net/bpf_jit.c:778:3: error: a label can only be part of a statement and a declaration is not a statement
int ret;
^~~
arch/loongarch/net/bpf_jit.c:779:3: error: expected expression before ‘u64’
u64 func_addr;
^~~
arch/loongarch/net/bpf_jit.c:780:3: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
bool func_addr_fixed;
^~~~
arch/loongarch/net/bpf_jit.c:784:11: error: ‘func_addr’ undeclared (first use in this function); did you mean ‘in_addr’?
&func_addr, &func_addr_fixed);
^~~~~~~~~
in_addr
arch/loongarch/net/bpf_jit.c:784:11: note: each undeclared identifier is reported only once for each function it appears in
arch/loongarch/net/bpf_jit.c:814:3: error: a label can only be part of a statement and a declaration is not a statement
u64 imm64 = (u64)(insn + 1)->imm << 32 | (u32)insn->imm;
^~~
Jinyang He [Sat, 29 Oct 2022 08:29:31 +0000 (16:29 +0800)]
LoongArch: Remove unused kernel stack padding
The current LoongArch kernel stack is padded as if obeying the MIPS o32
calling convention (32 bytes), signifying the port's MIPS lineage but no
longer making sense. Remove the padding for clarity.
Some pgc power-domain requires a parent power domain, so
add an optional power-domains property, otherwise there will be
dt check warning:
gpc@303a0000: pgc:power-domain@1: 'power-domains' does not match
any of the regexes: 'pinctrl-[0-9]+'
Fixes: 30af8513bdb5 ("dt-bindings: power: add defines for i.MX8MM power domains") Signed-off-by: Peng Fan <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
Peng Fan [Mon, 10 Oct 2022 10:07:47 +0000 (18:07 +0800)]
arm64: dts: imx8: correct clock order
Per bindings/mmc/fsl-imx-esdhc.yaml, the clock order is ipg, ahb, per,
otherwise warning: "
mmc@5b020000: clock-names:1: 'ahb' was expected
mmc@5b020000: clock-names:2: 'per' was expected "
Fixes: 16c4ea7501b1 ("arm64: dts: imx8: switch to new lpcg clock binding") Signed-off-by: Peng Fan <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
Petr Benes [Tue, 4 Oct 2022 15:39:20 +0000 (17:39 +0200)]
ARM: dts: imx6dl-yapp4: Do not allow PM to switch PU regulator off on Q/QP
Fix our design flaw in supply voltage distribution on the Quad and QuadPlus
based boards.
The problem is that we supply the SoC cache (VDD_CACHE_CAP) from VDD_PU
instead of VDD_SOC. The VDD_PU internal regulator can be disabled by PM
if VPU or GPU is not used. If that happens the system freezes. To prevent
that configure the reg_pu regulator to be always on.
Li Jun [Mon, 26 Sep 2022 11:45:35 +0000 (19:45 +0800)]
arm64: dts: imx8mn: Correct the usb power domain
pgc_otg1 is actual the power domain of usb PHY, usb controller
is in hsio power domain, and pgc_otg1 is required to be powered
up to detect usb remote wakeup, so move the pgc_otg1 power domain
to the usb phy node.
Fixes: ea2b5af58ab2 ("arm64: dts: imx8mn: put USB controller into power-domains") Signed-off-by: Li Jun <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
Li Jun [Mon, 26 Sep 2022 11:45:33 +0000 (19:45 +0800)]
arm64: dts: imx8mm: correct usb power domains
pgc_otg1/2 is actual the power domain of usb PHY, usb controller
is in hsio power domain, and pgc_otg1/2 is required to be powered
up to detect usb remote wakeup, so move the pgc_otg1/2 power domain
to the usb phy node.
Fixes: 01df28d80859 ("arm64: dts: imx8mm: put USB controllers into power-domains") Signed-off-by: Li Jun <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
Max Krummenacher [Thu, 22 Sep 2022 16:29:18 +0000 (18:29 +0200)]
arm64: dts: verdin-imx8mp: fix ctrl_sleep_moci
The GPIO signaling ctrl_sleep_moci is currently handled as a gpio hog.
But the gpio-hog node is made a child of the wrong gpio controller.
Move it to the node representing gpio4 so that it actually works.
Without this carrier board components jumpered to use the signal are
unconditionally switched off.
Fixes: a39ed23bdf6e ("arm64: dts: freescale: add initial support for verdin imx8m plus") Signed-off-by: Max Krummenacher <[email protected]> Signed-off-by: Marcel Ziswiler <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
Vladimir Oltean [Thu, 27 Oct 2022 14:54:39 +0000 (17:54 +0300)]
net: dsa: fall back to default tagger if we can't load the one from DT
DSA tagging protocol drivers can be changed at runtime through sysfs and
at probe time through the device tree (support for the latter was added
later).
When changing through sysfs, it is assumed that the module for the new
tagging protocol was already loaded into the kernel (in fact this is
only a concern for Ocelot/Felix switches, where we have tag_ocelot.ko
and tag_ocelot_8021q.ko; for every other switch, the default and
alternative protocols are compiled within the same .ko, so there is
nothing for the user to load).
The kernel cannot currently call request_module(), because it has no way
of constructing the modalias name of the tagging protocol driver
("dsa_tag-%d", where the number is one of DSA_TAG_PROTO_*_VALUE).
The device tree only contains the string name of the tagging protocol
("ocelot-8021q"), and the only mapping between the string and the
DSA_TAG_PROTO_OCELOT_8021Q_VALUE is present in tag_ocelot_8021q.ko.
So this is a chicken-and-egg situation and dsa_core.ko has nothing based
on which it can automatically request the insertion of the module.
As a consequence, if CONFIG_NET_DSA_TAG_OCELOT_8021Q is built as module,
the switch will forever defer probing.
The long-term solution is to make DSA call request_module() somehow,
but that probably needs some refactoring.
What we can do to keep operating with existing device tree blobs is to
cancel the attempt to change the tagging protocol with the one specified
there, and to remain operating with the default one. Depending on the
situation, the default protocol might still allow some functionality
(in the case of ocelot, it does), and it's better to have that than to
fail to probe.
ADIN1110 was registering netdev_notifiers on each device probe.
This leads to warnings/probe failures because of double registration
of the same notifier when to adin1110/2111 devices are connected to
the same system.
Move the registration of netdev_notifiers in module init call,
in this way multiple driver instances can use the same notifiers.
====================
a few corrections for SOCK_SUPPORT_ZC
There are several places/cases that got overlooked in regards to
SOCK_SUPPORT_ZC. We're lacking the flag for IPv6 UDP sockets and
accepted TCP sockets. We also should clear the flag when someone
tries to hijack a socket by replacing the ->sk_prot callbacks.
====================
net: also flag accepted sockets supporting msghdr originated zerocopy
Without this only the client initiated tcp sockets have SOCK_SUPPORT_ZC.
The listening socket on the server also has it, but the accepted
connections didn't, which meant IORING_OP_SEND[MSG]_ZC will always
fails with -EOPNOTSUPP.
Pavel Begunkov [Wed, 26 Oct 2022 23:25:56 +0000 (00:25 +0100)]
udp: advertise ipv6 udp support for msghdr::ubuf_info
Mark udp ipv6 as supporting msghdr::ubuf_info. In the original commit
SOCK_SUPPORT_ZC was supposed to be set by a udp_init_sock() call from
udp6_init_sock(), but d38afeec26ed4 ("tcp/udp: Call inet6_destroy_sock() in IPv6 ...")
removed it and so ipv6 udp misses the flag.
Cc: <[email protected]> # 6.0 Fixes: e993ffe3da4bc ("net: flag sockets supporting msghdr originated zerocopy") Signed-off-by: Pavel Begunkov <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
Jakub Kicinski [Fri, 28 Oct 2022 03:25:01 +0000 (20:25 -0700)]
net: openvswitch: add missing .resv_start_op
I missed one of the families in OvS when annotating .resv_start_op.
This triggers the warning added in commit ce48ebdd5651 ("genetlink:
limit the use of validation workarounds to old ops").
Jakub Kicinski [Thu, 27 Oct 2022 21:21:07 +0000 (14:21 -0700)]
netlink: hide validation union fields from kdoc
Mark the validation fields as private, users shouldn't set
them directly and they are too complicated to explain in
a more succinct way (there's already a long explanation
in the comment above).
The strict_start_type field is set directly and has a dedicated
comment so move that above the "private" section.
Linus Torvalds [Sat, 29 Oct 2022 00:03:00 +0000 (17:03 -0700)]
Merge tag 'riscv-for-linus-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for a build warning in the jump_label code
- One of the git://github -> https://github cleanups, for the SiFive
drivers
- A fix for the kasan initialization code, this still likely warrants
some cleanups but that's a bigger problem and at least this fixes the
crashes in the short term
- A pair of fixes for extension support detection on mixed LLVM/GNU
toolchains
- A fix for a runtime warning in the /proc/cpuinfo code
* tag 'riscv-for-linus-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Fix /proc/cpuinfo cpumask warning
riscv: fix detection of toolchain Zihintpause support
riscv: fix detection of toolchain Zicbom support
riscv: mm: add missing memcpy in kasan_init
MAINTAINERS: git://github.com -> https://github.com for sifive
riscv: jump_label: mark arguments as const to satisfy asm constraints
Linus Torvalds [Fri, 28 Oct 2022 23:48:29 +0000 (16:48 -0700)]
Merge tag 'acpi-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and device properties fixes from Rafael Wysocki:
"These fix device properties documentation and the ACPI PCC code, add a
new IRQ override quirk for resource handling and add one more item to
the list of device IDs to be ignored when returned by _DEP.
Specifics:
- Fix the documentation of the *_match_string() family of functions
to properly cover the return value (Andy Shevchenko)
- Fix a possible integer overflow during multiplication in the ACPI
PCC code (Manank Patel)
- Make the ACPI device resources code skip IRQ override on Asus
Vivobook S5602ZA (Tamim Khan)
- Add LATT2021 to the list of device IDs that are ignored when
returned by _DEP, because there are no drivers for them in the
kernel and no plans to add such drivers (Hans de Goede)"
* tag 'acpi-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: scan: Add LATT2021 to acpi_ignore_dep_ids[]
ACPI: resource: Skip IRQ override on Asus Vivobook S5602ZA
ACPI: PCC: Fix unintentional integer overflow
device property: Fix documentation for *_match_string() APIs
Linus Torvalds [Fri, 28 Oct 2022 23:44:12 +0000 (16:44 -0700)]
Merge tag 'pm-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These make the intel_pstate driver work as expected on all hybrid
platforms to date (regardless of possible platform firmware issues),
fix hybrid sleep on systems using suspend-to-idle by default, make the
generic power domains code handle disabled idle states properly and
update pm-graph.
Specifics:
- Make intel_pstate use what is known about the hardware instead of
relying on information from the platform firmware (ACPI CPPC in
particular) to establish the relationship between the HWP CPU
performance levels and frequencies on all hybrid platforms
available to date (Rafael Wysocki)
- Allow hybrid sleep to use suspend-to-idle as a system suspend
method if it is the current suspend method of choice (Mario
Limonciello)
- Fix handling of unavailable/disabled idle states in the generic
power domains code (Sudeep Holla)
- Update the pm-graph suite of utilities to version 5.10 which is
fixes-mostly and does not add any new features (Todd Brandt)"
* tag 'pm-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: domains: Fix handling of unavailable/disabled idle states
pm-graph v5.10
cpufreq: intel_pstate: hybrid: Use known scaling factor for P-cores
cpufreq: intel_pstate: Read all MSRs on the target CPU
PM: hibernate: Allow hybrid sleep to work with s2idle
Kees Cook [Fri, 28 Oct 2022 22:32:07 +0000 (15:32 -0700)]
fortify: Capture __bos() results in const temp vars
In two recent run-time memcpy() bound checking bug reports (NFS[1] and
JFS[2]), the _detection_ was working correctly (in the sense that the
requested copy size was larger than the destination field size), but
the _warning text_ was showing the destination field size as SIZE_MAX
("unknown size"). This should be impossible, since the detection function
will explicitly give up if the destination field size is unknown. For
example, the JFS warning was:
memcpy: detected field-spanning write (size 132) of single field "ip->i_link" at fs/jfs/namei.c:950 (size 18446744073709551615)
Other cases of this warning (e.g.[3]) have reported correctly,
and the reproducer only happens under GCC (at least 10.2 and 12.1),
so this currently appears to be a GCC bug. Explicitly capturing the
__builtin_object_size() results in const temporary variables fixes the
report. For example, the JFS reproducer now correctly reports the field
size (128):
memcpy: detected field-spanning write (size 132) of single field "ip->i_link" at fs/jfs/namei.c:950 (size 128)
Examination of the .text delta (which is otherwise identical), shows
the literal value used in the report changing:
random: use arch_get_random*_early() in random_init()
While reworking the archrandom handling, commit d349ab99eec7 ("random:
handle archrandom with multiple longs") switched to the non-early
archrandom helpers in random_init(), which broke initialization of the
entropy pool from the arm64 random generator.
Indeed at that point the arm64 CPU features, which verify that all CPUs
have compatible capabilities, are not finalized so arch_get_random_seed_longs()
is unsuccessful. Instead random_init() should use the _early functions,
which check only the boot CPU on arm64. On other architectures the
_early functions directly call the normal ones.
Rasmus Villemoes [Fri, 21 Oct 2022 06:01:53 +0000 (08:01 +0200)]
tools/nolibc/string: Fix memcmp() implementation
The C standard says that memcmp() must treat the buffers as consisting
of "unsigned chars". If char happens to be unsigned, the casts are ok,
but then obviously the c1 variable can never contain a negative
value. And when char is signed, the casts are wrong, and there's still
a problem with using an 8-bit quantity to hold the difference, because
that can range from -255 to +255.
For example, assuming char is signed, comparing two 1-byte buffers,
one containing 0x00 and another 0x80, the current implementation would
return -128 for both memcmp(a, b, 1) and memcmp(b, a, 1), whereas one
of those should of course return something positive.
Willy Tarreau [Sun, 9 Oct 2022 18:29:36 +0000 (20:29 +0200)]
tools/nolibc: Fix missing strlen() definition and infinite loop with gcc-12
When built at -Os, gcc-12 recognizes an strlen() pattern in nolibc_strlen()
and replaces it with a jump to strlen(), which is not defined as a symbol
and breaks compilation. Worse, when the function is called strlen(), the
function is simply replaced with a jump to itself, hence becomes an
infinite loop.
One way to avoid this is to always set -ffreestanding, but the calling
code doesn't know this and there's no way (either via attributes or
pragmas) to globally enable it from include files, effectively leaving
a painful situation for the caller.
Alexey suggested to place an empty asm() statement inside the loop to
stop gcc from recognizing a well-known pattern, which happens to work
pretty fine. At least it allows us to make sure our local definition
is not replaced with a self jump.
The function only needs to be renamed back to strlen() so that the symbol
exists, which implies that nolibc_strlen() which is used on variable
strings has to be declared as a macro that points back to it before the
strlen() macro is redifined.
It was verified to produce valid code with gcc 3.4 to 12.1 at different
optimization levels, and both with constant and variable strings.
In case this problem surfaces again in the future, an alternate approach
consisting in adding an optimize("no-tree-loop-distribute-patterns")
function attribute for gcc>=12 worked as well but is less pretty.
mm: multi-gen LRU: move lru_gen_add_mm() out of IRQ-off region
lru_gen_add_mm() has been added within an IRQ-off region in the commit
mentioned below. The other invocations of lru_gen_add_mm() are not within
an IRQ-off region.
The invocation within IRQ-off region is problematic on PREEMPT_RT because
the function is using a spin_lock_t which must not be used within
IRQ-disabled regions.
The other invocations of lru_gen_add_mm() occur while
task_struct::alloc_lock is acquired. Move lru_gen_add_mm() after
interrupts are enabled and before task_unlock().
Lukas Bulwahn [Wed, 26 Oct 2022 12:00:29 +0000 (14:00 +0200)]
lib: maple_tree: remove unneeded initialization in mtree_range_walk()
Before the do-while loop in mtree_range_walk(), the variables next, min,
max need to be initialized. The variables last, prev_min and prev_max are
set within the loop body before they are eventually used after exiting the
loop body.
As it is a do-while loop, the loop body is executed at least once, so the
variables last, prev_min and prev_max do not need to be initialized before
the loop body.
Remove unneeded initialization of last and prev_min.
The needless initialization was reported by clang-analyzer as Dead Stores.
As the compiler already identifies these assignments as unneeded, it
optimizes the assignments away. Hence:
Liam Howlett [Tue, 25 Oct 2022 16:12:49 +0000 (16:12 +0000)]
mmap: fix remap_file_pages() regression
When using the VMA iterator, the final execution will set the variable
'next' to NULL which causes the function to fail out. Restore the break
in the loop to exit the VMA iterator early without clearing NULL fixes the
issue.
Ira Weiny [Tue, 25 Oct 2022 22:01:08 +0000 (15:01 -0700)]
mm/shmem: ensure proper fallback if page faults
The kernel test robot flagged a recursive lock as a result of a conversion
from kmap_atomic() to kmap_local_folio()[Link]
The cause was due to the code depending on the kmap_atomic() side effect
of disabling page faults. In that case the code expects the fault to fail
and take the fallback case.
git archaeology implied that the recursion may not be an actual bug.[1]
However, depending on the implementation of the mmap_lock and the
condition of the call there may still be a deadlock.[2] So this is not
purely a lockdep issue. Considering a single threaded call stack there
are 3 options.
1) Different mm's are in play (no issue)
2) Readlock implementation is recursive and same mm is in play
(no issue)
3) Readlock implementation is _not_ recursive (issue)
The mmap_lock is recursive so with a single thread there is no issue.
However, Matthew pointed out a deadlock scenario when you consider
additional process' and threads thusly.
"The readlock implementation is only recursive if nobody else has taken a
write lock. If you have a multithreaded process, one of the other threads
can call mmap() and that will prevent recursion (due to fairness). Even
if it's a different process that you're trying to acquire the mmap read
lock on, you can still get into a deadly embrace. eg:
process A thread 1 takes read lock on own mmap_lock
process A thread 2 calls mmap, blocks taking write lock
process B thread 1 takes page fault, read lock on own mmap lock
process B thread 2 calls mmap, blocks taking write lock
process A thread 1 blocks taking read lock on process B
process B thread 1 blocks taking read lock on process A
Now all four threads are blocked waiting for each other."
Regardless using pagefault_disable() ensures that no matter what locking
implementation is used a deadlock will not occur. Add an explicit
pagefault_disable() and a big comment to explain this for future souls
looking at this code.
Ira Weiny [Mon, 24 Oct 2022 04:34:52 +0000 (21:34 -0700)]
mm/userfaultfd: replace kmap/kmap_atomic() with kmap_local_page()
kmap() and kmap_atomic() are being deprecated in favor of
kmap_local_page() which is appropriate for any thread local context.[1]
A recent locking bug report with userfaultfd showed that the conversion of
the kmap_atomic()'s in those code flows requires care with regard to the
prevention of deadlock.[2]
git archaeology implied that the recursion may not be an actual bug.[3]
However, depending on the implementation of the mmap_lock and the
condition of the call there may still be a deadlock.[4] So this is not
purely a lockdep issue. Considering a single threaded call stack there
are 3 options.
1) Different mm's are in play (no issue)
2) Readlock implementation is recursive and same mm is in play
(no issue)
3) Readlock implementation is _not_ recursive (issue)
The mmap_lock is recursive so with a single thread there is no issue.
However, Matthew pointed out a deadlock scenario when you consider
additional process' and threads thusly.
"The readlock implementation is only recursive if nobody else has taken a
write lock. If you have a multithreaded process, one of the other threads
can call mmap() and that will prevent recursion (due to fairness). Even
if it's a different process that you're trying to acquire the mmap read
lock on, you can still get into a deadly embrace. eg:
process A thread 1 takes read lock on own mmap_lock
process A thread 2 calls mmap, blocks taking write lock
process B thread 1 takes page fault, read lock on own mmap lock
process B thread 2 calls mmap, blocks taking write lock
process A thread 1 blocks taking read lock on process B
process B thread 1 blocks taking read lock on process A
Now all four threads are blocked waiting for each other."
Regardless using pagefault_disable() ensures that no matter what locking
implementation is used a deadlock will not occur.
Complete kmap conversion in userfaultfd by replacing the kmap() and
kmap_atomic() calls with kmap_local_page(). When replacing the
kmap_atomic() call ensure page faults continue to be disabled to support
the correct fall back behavior and add a comment to inform future souls of
the requirement.
Ensure that KMSAN builds replace memset/memcpy/memmove calls with the
respective __msan_XXX functions, and that none of the macros are redefined
twice. This should allow building kernel with both CONFIG_KMSAN and
CONFIG_FORTIFY_SOURCE.
x86: asm: make sure __put_user_size() evaluates pointer once
User access macros must ensure their arguments are evaluated only once if
they are used more than once in the macro body. Adding
instrument_put_user() to __put_user_size() resulted in double evaluation
of the `ptr` argument, which led to correctness issues when performing
e.g. unsafe_put_user(..., p++, ...).
To fix those issues, evaluate the `ptr` argument of __put_user_size() at
the beginning of the macro.
projects / linux.git / log