s390/mm: Add NULL pointer check to crst_table_free() base_crst_free()
crst_table_free() used to work with NULL pointers before the conversion
to ptdescs. Since crst_table_free() can be called with a NULL pointer
(error handling in crst_table_upgrade() add an explicit check.
Also add the same check to base_crst_free() for consistency reasons.
In real life this should not happen, since order two GFP_KERNEL
allocations will not fail, unless FAIL_PAGE_ALLOC is enabled and used.
Paolo Abeni [Tue, 9 Jul 2024 14:21:56 +0000 (16:21 +0200)]
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-07-09
The following pull-request contains BPF updates for your *net* tree.
We've added 3 non-merge commits during the last 1 day(s) which contain
a total of 5 files changed, 81 insertions(+), 11 deletions(-).
The main changes are:
1) Fix a use-after-free in a corner case where tcx_entry got released too
early. Also add BPF test coverage along with the fix, from Daniel Borkmann.
2) Fix a kernel panic on Loongarch in sk_msg_recvmsg() which got triggered
by running BPF sockmap selftests, from Geliang Tang.
bpf-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
skmsg: Skip zero length skb in sk_msg_recvmsg
selftests/bpf: Extend tcx tests to cover late tcx_entry release
bpf: Fix too early release of tcx_entry
====================
Ronald Wahl [Sat, 6 Jul 2024 10:13:37 +0000 (12:13 +0200)]
net: ks8851: Fix deadlock with the SPI chip variant
When SMP is enabled and spinlocks are actually functional then there is
a deadlock with the 'statelock' spinlock between ks8851_start_xmit_spi
and ks8851_irq:
octeontx2-af: Fix incorrect value output on error path in rvu_check_rsrc_availability()
In rvu_check_rsrc_availability() in case of invalid SSOW req, an incorrect
data is printed to error log. 'req->sso' value is printed instead of
'req->ssow'. Looks like "copy-paste" mistake.
Fix this mistake by replacing 'req->sso' with 'req->ssow'.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Taniya Das [Tue, 25 Jun 2024 04:33:11 +0000 (10:03 +0530)]
pmdomain: qcom: rpmhpd: Skip retention level for Power Domains
In the cases where the power domain connected to logics is allowed to
transition from a level(L)-->power collapse(0)-->retention(1) or
vice versa retention(1)-->power collapse(0)-->level(L) will cause the
logic to lose the configurations. The ARC does not support retention
to collapse transition on MxC rails.
The targets from SM8450 onwards the PLL logics of clock controllers are
connected to MxC rails and the recommended configurations are carried
out during the clock controller probes. The MxC transition as mentioned
above should be skipped to ensure the PLL settings are intact across
clock controller power on & off.
On older targets that do not split MX into MxA and MxC does not collapse
the logic and it is parked always at RETENTION, thus this issue is never
observed on those targets.
Jakub Kicinski [Fri, 5 Jul 2024 02:00:05 +0000 (19:00 -0700)]
bnxt: fix crashes when reducing ring count with active RSS contexts
bnxt doesn't check if a ring is used by RSS contexts when reducing
ring count. Core performs a similar check for the drivers for
the main context, but core doesn't know about additional contexts,
so it can't validate them. bnxt_fill_hw_rss_tbl_p5() uses ring
id to index bp->rx_ring[], which without the check may end up
being out of bounds.
BUG: KASAN: slab-out-of-bounds in __bnxt_hwrm_vnic_set_rss+0xb79/0xe40
Read of size 2 at addr ffff8881c5809618 by task ethtool/31525
Call Trace:
__bnxt_hwrm_vnic_set_rss+0xb79/0xe40
bnxt_hwrm_vnic_rss_cfg_p5+0xf7/0x460
__bnxt_setup_vnic_p5+0x12e/0x270
__bnxt_open_nic+0x2262/0x2f30
bnxt_open_nic+0x5d/0xf0
ethnl_set_channels+0x5d4/0xb30
ethnl_default_set_doit+0x2f1/0x620
Core does track the additional contexts in net-next, so we can
move this validation out of the driver as a follow up there.
This crash happens every time when running sockmap_skb_verdict_shutdown
subtest in sockmap_basic.
This crash is because a NULL pointer is passed to page_address() in the
sk_msg_recvmsg(). Due to the different implementations depending on the
architecture, page_address(NULL) will trigger a panic on Loongarch
platform but not on x86 platform. So this bug was hidden on x86 platform
for a while, but now it is exposed on Loongarch platform. The root cause
is that a zero length skb (skb->len == 0) was put on the queue.
This zero length skb is a TCP FIN packet, which was sent by shutdown(),
invoked in test_sockmap_skb_verdict_shutdown():
shutdown(p1, SHUT_WR);
In this case, in sk_psock_skb_ingress_enqueue(), num_sge is zero, and no
page is put to this sge (see sg_set_page in sg_set_page), but this empty
sge is queued into ingress_msg list.
And in sk_msg_recvmsg(), this empty sge is used, and a NULL page is got by
sg_page(sge). Pass this NULL page to copy_page_to_iter(), which passes it
to kmap_local_page() and to page_address(), then kernel panics.
To solve this, we should skip this zero length skb. So in sk_msg_recvmsg(),
if copy is zero, that means it's a zero length skb, skip invoking
copy_page_to_iter(). We are using the EFAULT return triggered by
copy_page_to_iter to check for is_fin in tcp_bpf.c.
net: phy: microchip: lan87xx: reinit PHY after cable test
Reinit PHY after cable test, otherwise link can't be established on
tested port. This issue is reproducible on LAN9372 switches with
integrated 100BaseT1 PHYs.
Marc Zyngier [Tue, 2 Jul 2024 21:42:46 +0000 (22:42 +0100)]
of/irq: Disable "interrupt-map" parsing for PASEMI Nemo
Once again, we've broken PASEMI Nemo boards with its incomplete
"interrupt-map" translations. Commit 935df1bd40d4 ("of/irq: Factor out
parsing of interrupt-map parent phandle+args from of_irq_parse_raw()")
changed the behavior resulting in the existing work-around not taking
effect. Rework the work-around to just skip parsing "interrupt-map" up
front by using the of_irq_imap_abusers list.
Merge tag 'perf-tools-fixes-for-v6.10-2024-07-08' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Namhyung Kim:
"Fix performance issue for v6.10
These address the performance issues reported by Matt, Namhyung and
Linus. Recently perf changed the processing of the comm string and DSO
using sorted arrays but this caused it to sort the array whenever
adding a new entry.
This caused a performance issue and the fix is to enhance the sorting
by finding the insertion point in the sorted array and to shift
righthand side using memmove()"
* tag 'perf-tools-fixes-for-v6.10-2024-07-08' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf dsos: When adding a dso into sorted dsos maintain the sort order
perf comm str: Avoid sort during insert
Daniel Borkmann [Mon, 8 Jul 2024 13:31:29 +0000 (15:31 +0200)]
bpf: Fix too early release of tcx_entry
Pedro Pinto and later independently also Hyunwoo Kim and Wongi Lee reported
an issue that the tcx_entry can be released too early leading to a use
after free (UAF) when an active old-style ingress or clsact qdisc with a
shared tc block is later replaced by another ingress or clsact instance.
Essentially, the sequence to trigger the UAF (one example) can be as follows:
1. A network namespace is created
2. An ingress qdisc is created. This allocates a tcx_entry, and
&tcx_entry->miniq is stored in the qdisc's miniqp->p_miniq. At the
same time, a tcf block with index 1 is created.
3. chain0 is attached to the tcf block. chain0 must be connected to
the block linked to the ingress qdisc to later reach the function
tcf_chain0_head_change_cb_del() which triggers the UAF.
4. Create and graft a clsact qdisc. This causes the ingress qdisc
created in step 1 to be removed, thus freeing the previously linked
tcx_entry:
5. Finally, the network namespace is closed. This registers the
cleanup_net worker, and during the process of releasing the
remaining clsact qdisc, it accesses the tcx_entry that was
already freed in step 4, causing the UAF to occur:
There are also other variants, the gist is to add an ingress (or clsact)
qdisc with a specific shared block, then to replace that qdisc, waiting
for the tcx_entry kfree_rcu() to be executed and subsequently accessing
the current active qdisc's miniq one way or another.
The correct fix is to turn the miniq_active boolean into a counter. What
can be observed, at step 2 above, the counter transitions from 0->1, at
step [a] from 1->2 (in order for the miniq object to remain active during
the replacement), then in [b] from 2->1 and finally [c] 1->0 with the
eventual release. The reference counter in general ranges from [0,2] and
it does not need to be atomic since all access to the counter is protected
by the rtnl mutex. With this in place, there is no longer a UAF happening
and the tcx_entry is freed at the correct time.
MAINTAINERS: Move myself from SPRD Maintainer to Reviewer
I've resigned from Unisoc (formerly Spreadtrum) and cannot access
internal HW specifications any more, also cannot commit much
time for maintaining sprd code, especially DTS.
While I'm happy to help review the sprd drivers I wrote before.
thermal: core: Fix list sorting in __thermal_zone_device_update()
The order in which lists are sorted in __thermal_zone_device_update()
is reverse with respect to what it should be due to a mistake in
thermal_trip_notify_cmp().
Fix it and observe that it is not necessary to sort the lists in
different orders. They can both be sorted in ascending order if
way_down_list is walked in reverse order which allows the code to
be slightly more straightforward (and less prone to silly mistakes).
firmware: cs_dsp: Use strnlen() on name fields in V1 wmfw files
Use strnlen() instead of strlen() on the algorithm and coefficient name
string arrays in V1 wmfw files.
In V1 wmfw files the name is a NUL-terminated string in a fixed-size
array. cs_dsp should protect against overrunning the array if the NUL
terminator is missing.
Merge tag 'qcom-drivers-fixes-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm driver fixes for v6.10
UCSI support is disabled on SC8280XP while being debugged, as it's
causing the system to crash. A recent LLCC QDU1000 binding change is
reverted, to allow expressing the LLCC memory regions.
* tag 'qcom-drivers-fixes-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
Revert "dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries"
soc: qcom: pmic_glink: disable UCSI on sc8280xp
Merge tag 'qcom-arm64-defconfig-fixes-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm Arm64 defconfig fixes for v6.10
Enable the Elan I2C HID driver, to enable the touchscreen on devices
such as the Lenovo Thinkpad X13s.
* tag 'qcom-arm64-defconfig-fixes-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: enable Elan i2c-hid driver
Merge tag 'qcom-arm64-fixes-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm Arm64 DeviceTree fixes for v6.10
This marks the PSHOLD node on SC8280XP as reserved, to resolve a
regression where a reset is triggered instead of a clean shutdown. Also
on SC8280XP the touchscreen properties are adjusted to make it properly
described on CRD and make it work on the Lenovo Thinkpad X13s.
Corrects the LLCC definitions on SC8180X and QDU1000 to allow these
drivers and their dependencies to probe.
X1 Elite CRD is given more CMA space, to avoid running out during boot,
as PCIe SMMU is not accessible. Audio configuration is corrected, on
the same.
SM6115 SDHC is given an IOMMU stream, to avoid access issues.
Lastly the EL2 non-secure physical timer interrupt on SA8775P is
corrected from its previous incorrect value.
* tag 'qcom-arm64-fixes-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: qdu1000: Fix LLCC reg property
arm64: dts: qcom: sm6115: add iommu for sdhc_1
arm64: dts: qcom: x1e80100-crd: fix DAI used for headset recording
arm64: dts: qcom: x1e80100-crd: fix WCD audio codec TX port mapping
arm64: dts: qcom: sc8280xp-crd: use external pull up for touch reset
arm64: dts: qcom: sc8280xp-x13s: fix touchscreen power on
arm64: dts: qcom: x1e80100: Fix PCIe 6a reg offsets and add MHI
arm64: dts: qcom: sa8775p: Correct IRQ number of EL2 non-secure physical timer
arm64: dts: qcom: sc8280xp: Set status = "reserved" on PSHOLD
arm64: dts: qcom: x1e80100-*: Allocate some CMA buffers
arm64: dts: qcom: sc8180x: Fix LLCC reg property again
Jianbo Liu [Mon, 8 Jul 2024 06:58:12 +0000 (09:58 +0300)]
xfrm: call xfrm_dev_policy_delete when kill policy
xfrm_policy_kill() is called at different places to delete xfrm
policy. It will call xfrm_pol_put(). But xfrm_dev_policy_delete() is
not called to free the policy offloaded to hardware.
The three commits cited here are to handle this issue by calling
xfrm_dev_policy_delete() outside xfrm_get_policy(). But they didn't
cover all the cases. An example, which is not handled for now, is
xfrm_policy_insert(). It is called when XFRM_MSG_UPDPOLICY request is
received. Old policy is replaced by new one, but the offloaded policy
is not deleted, so driver doesn't have the chance to release hardware
resources.
To resolve this issue for all cases, move xfrm_dev_policy_delete()
into xfrm_policy_kill(), so the offloaded policy can be deleted from
hardware when it is called, which avoids hardware resources leakage.
Fixes: 919e43fad516 ("xfrm: add an interface to offload policy") Fixes: bf06fcf4be0f ("xfrm: add missed call to delete offloaded policies") Fixes: 982c3aca8bac ("xfrm: delete offloaded policy") Signed-off-by: Jianbo Liu <[email protected]> Reviewed-by: Cosmin Ratiu <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Steffen Klassert <[email protected]>
Jianbo Liu [Mon, 8 Jul 2024 06:58:11 +0000 (09:58 +0300)]
xfrm: fix netdev reference count imbalance
In cited commit, netdev_tracker_alloc() is called for the newly
allocated xfrm state, but dev_hold() is missed, which causes netdev
reference count imbalance, because netdev_put() is called when the
state is freed in xfrm_dev_state_free(). Fix the issue by replacing
netdev_tracker_alloc() with netdev_hold().
Fixes: f8a70afafc17 ("xfrm: add TX datapath support for IPsec packet offload mode") Signed-off-by: Jianbo Liu <[email protected]> Reviewed-by: Cosmin Ratiu <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Steffen Klassert <[email protected]>
Ian Rogers [Wed, 3 Jul 2024 17:21:17 +0000 (10:21 -0700)]
perf dsos: When adding a dso into sorted dsos maintain the sort order
dsos__add would add at the end of the dso array possibly requiring a
later find to re-sort the array. Patterns of find then add were
becoming O(n*log n) due to the sorts. Change the add routine to be
O(n) rather than O(1) but to maintain the sorted-ness of the dsos
array so that later finds don't need the O(n*log n) sort.
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A set of clk fixes for the Qualcomm, Mediatek, and Allwinner drivers:
- Fix the Qualcomm Stromer Plus PLL set_rate() clk_op to explicitly
set the alpha enable bit and not set bits that don't exist
- Mark Qualcomm IPQ9574 crypto clks as voted to avoid stuck clk
warnings
- Fix the parent of some PLLs on Qualcomm sm6530 so their rate is
correct
- Fix the min/max rate clamping logic in the Allwinner driver that
got broken in v6.9
- Limit runtime PM enabling in the Mediatek driver to only
mt8183-mfgcfg so that system wide resume doesn't break on other
Mediatek SoCs"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: mediatek: mt8183: Only enable runtime PM on mt8183-mfgcfg
clk: sunxi-ng: common: Don't call hw_to_ccu_common on hw without common
clk: qcom: gcc-ipq9574: Add BRANCH_HALT_VOTED flag
clk: qcom: apss-ipq-pll: remove 'config_ctl_hi_val' from Stromer pll configs
clk: qcom: clk-alpha-pll: set ALPHA_EN bit for Stromer Plus PLLs
clk: qcom: gcc-sm6350: Fix gpll6* & gpll7 parents
Merge tag 'powerpc-6.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix unnecessary copy to 0 when kernel is booted at address 0
- Fix usercopy crash when dumping dtl via debugfs
- Avoid possible crash when PCI hotplug races with error handling
- Fix kexec crash caused by scv being disabled before other CPUs
call-in
- Fix powerpc selftests build with USERCFLAGS set
Thanks to Anjali K, Ganesh Goudar, Gautam Menghani, Jinglin Wen,
Nicholas Piggin, Sourabh Jain, Srikar Dronamraju, and Vishal Chourasia.
* tag 'powerpc-6.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix build with USERCFLAGS set
powerpc/pseries: Fix scv instruction crash with kexec
powerpc/eeh: avoid possible crash when edev->pdev changes
powerpc/pseries: Whitelist dtl slub object for copying to userspace
powerpc/64s: Fix unnecessary copy to 0 when kernel is booted at address 0
mm: fix crashes from deferred split racing folio migration
Even on 6.10-rc6, I've been seeing elusive "Bad page state"s (often on
flags when freeing, yet the flags shown are not bad: PG_locked had been
set and cleared??), and VM_BUG_ON_PAGE(page_ref_count(page) == 0)s from
deferred_split_scan()'s folio_put(), and a variety of other BUG and WARN
symptoms implying double free by deferred split and large folio migration.
6.7 commit 9bcef5973e31 ("mm: memcg: fix split queue list crash when large
folio migration") was right to fix the memcg-dependent locking broken in 85ce2c517ade ("memcontrol: only transfer the memcg data for migration"),
but missed a subtlety of deferred_split_scan(): it moves folios to its own
local list to work on them without split_queue_lock, during which time
folio->_deferred_list is not empty, but even the "right" lock does nothing
to secure the folio and the list it is on.
Fortunately, deferred_split_scan() is careful to use folio_try_get(): so
folio_migrate_mapping() can avoid the race by folio_undo_large_rmappable()
while the old folio's reference count is temporarily frozen to 0 - adding
such a freeze in the !mapping case too (originally, folio lock and
unmapping and no swap cache left an anon folio unreachable, so no freezing
was needed there: but the deferred split queue offers a way to reach it).
Paul Menzel [Mon, 1 Jul 2024 15:58:01 +0000 (17:58 +0200)]
lib/build_OID_registry: avoid non-destructive substitution for Perl < 5.13.2 compat
On a system with Perl 5.12.1, commit 5ef6dc08cfde
("lib/build_OID_registry: don't mention the full path of the script in
output") causes the build to fail with the error below.
Bareword found where operator expected at ./lib/build_OID_registry line 41, near "s#^\Q$abs_srctree/\E##r"
syntax error at ./lib/build_OID_registry line 41, near "s#^\Q$abs_srctree/\E##r"
Execution of ./lib/build_OID_registry aborted due to compilation errors.
make[3]: *** [lib/Makefile:352: lib/oid_registry_data.c] Error 255
Ahmad Fatoum analyzed that non-destructive substitution is only supported since
Perl 5.13.2. Instead of dropping `r` and having the side effect of modifying
`$0`, introduce a dedicated variable to support older Perl versions.
Per the analysis done by yangge, when starting the SEV virtual machine, it
will call pin_user_pages_fast(..., FOLL_LONGTERM, ...) to pin the memory.
But the page is in CMA area, so fast GUP will fail then fallback to the
slow path due to the longterm pinnalbe check in try_grab_folio().
The slow path will try to pin the pages then migrate them out of CMA area.
But the slow path also uses try_grab_folio() to pin the page, it will
also fail due to the same check then the above warning is triggered.
In addition, the try_grab_folio() is supposed to be used in fast path and
it elevates folio refcount by using add ref unless zero. We are guaranteed
to have at least one stable reference in slow path, so the simple atomic add
could be used. The performance difference should be trivial, but the
misuse may be confusing and misleading.
Redefined try_grab_folio() to try_grab_folio_fast(), and try_grab_page()
to try_grab_folio(), and use them in the proper paths. This solves both
the abuse and the kernel warning.
The proper naming makes their usecase more clear and should prevent from
abusing in the future.
peterx said:
: The user will see the pin fails, for gpu-slow it further triggers the WARN
: right below that failure (as in the original report):
:
: folio = try_grab_folio(page, page_increm - 1,
: foll_flags);
: if (WARN_ON_ONCE(!folio)) { <------------------------ here
: /*
: * Release the 1st page ref if the
: * folio is problematic, fail hard.
: */
: gup_put_folio(page_folio(page), 1,
: foll_flags);
: ret = -EFAULT;
: goto out;
: }
Merge tag 'i2c-for-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"An i2c driver fix"
* tag 'i2c-for-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr
Currently building the powerpc selftests with USERCFLAGS set to anything
causes the build to break:
$ make -C tools/testing/selftests/powerpc V=1 USERCFLAGS=-Wno-error
...
gcc -Wno-error cache_shape.c ...
cache_shape.c:18:10: fatal error: utils.h: No such file or directory
18 | #include "utils.h"
| ^~~~~~~~~
compilation terminated.
This happens because the USERCFLAGS are added to CFLAGS in lib.mk, which
causes the check of CFLAGS in powerpc/flags.mk to skip setting CFLAGS at
all, resulting in none of the usual CFLAGS being passed. That can
be seen in the output above, the only flag passed to the compiler is
-Wno-error.
Fix it by dropping the conditional setting of CFLAGS in flags.mk.
Instead always set CFLAGS, but also append USERCFLAGS if they are set.
Note that appending to CFLAGS (with +=) wouldn't work, because flags.mk
is included by multiple Makefiles (to support partial builds), causing
CFLAGS to be appended to multiple times. Additionally that would place
the USERCFLAGS prior to the standard CFLAGS, meaning the USERCFLAGS
couldn't override the standard flags. Being able to override the
standard flags is desirable, for example for adding -Wno-error.
With the fix in place, the CFLAGS are set correctly, including the
USERCFLAGS:
The internal mic boost on the VAIO models VJFE-CL and VJFE-IL is too high.
Fix this by applying the ALC269_FIXUP_LIMIT_INT_MIC_BOOST fixup to the machine
to limit the gain.
tcp: fix incorrect undo caused by DSACK of TLP retransmit
Loss recovery undo_retrans bookkeeping had a long-standing bug where a
DSACK from a spurious TLP retransmit packet could cause an erroneous
undo of a fast recovery or RTO recovery that repaired a single
really-lost packet (in a sequence range outside that of the TLP
retransmit). Basically, because the loss recovery state machine didn't
account for the fact that it sent a TLP retransmit, the DSACK for the
TLP retransmit could erroneously be implicitly be interpreted as
corresponding to the normal fast recovery or RTO recovery retransmit
that plugged a real hole, thus resulting in an improper undo.
For example, consider the following buggy scenario where there is a
real packet loss but the congestion control response is improperly
undone because of this bug:
+ send packets P1, P2, P3, P4
+ P1 is really lost
+ send TLP retransmit of P4
+ receive SACK for original P2, P3, P4
+ enter fast recovery, fast-retransmit P1, increment undo_retrans to 1
+ receive DSACK for TLP P4, decrement undo_retrans to 0, undo (bug!)
+ receive cumulative ACK for P1-P4 (fast retransmit plugged real hole)
The fix: when we initialize undo machinery in tcp_init_undo(), if
there is a TLP retransmit in flight, then increment tp->undo_retrans
so that we make sure that we receive a DSACK corresponding to the TLP
retransmit, as well as DSACKs for all later normal retransmits, before
triggering a loss recovery undo. Note that we also have to move the
line that clears tp->tlp_high_seq for RTO recovery, so that upon RTO
we remember the tp->tlp_high_seq value until tcp_init_undo() and clear
it only afterward.
Also note that the bug dates back to the original 2013 TLP
implementation, commit 6ba8a3b19e76 ("tcp: Tail loss probe (TLP)").
However, this patch will only compile and work correctly with kernels
that have tp->tlp_retrans, which was added only in v5.8 in 2020 in
commit 76be93fc0702 ("tcp: allow at most one TLP probe per flight").
So we associate this fix with that later commit.
read to 0xffff88814cd91280 of 8 bytes by task 3202 on cpu 1:
skb_queue_empty include/linux/skbuff.h:1798 [inline]
wg_packet_send_keepalive+0x20/0x100 drivers/net/wireguard/send.c:225
wg_receive_handshake_packet drivers/net/wireguard/receive.c:186 [inline]
wg_packet_handshake_receive_worker+0x445/0x5e0 drivers/net/wireguard/receive.c:213
process_one_work kernel/workqueue.c:2633 [inline]
process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2706
worker_thread+0x525/0x730 kernel/workqueue.c:2787
kthread+0x1d7/0x210 kernel/kthread.c:388
ret_from_fork+0x48/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:242
value changed: 0xffff888148fef200 -> 0xffff88814cd91280
Mark this race as intentional by using the skb_queue_empty_lockless()
function rather than skb_queue_empty(), which uses READ_ONCE()
internally to annotate the race.
On the parisc platform, the kernel issues kernel warnings because
swap_endian() tries to load a 128-bit IPv6 address from an unaligned
memory location:
Kernel: unaligned access to 0x55f4688c in wg_allowedips_insert_v6+0x2c/0x80 [wireguard] (iir 0xf3010df)
Kernel: unaligned access to 0x55f46884 in wg_allowedips_insert_v6+0x38/0x80 [wireguard] (iir 0xf2010dc)
Avoid such unaligned memory accesses by instead using the
get_unaligned_be64() helper macro.
Merge tag 'integrity-v6.10-fix' of ssh://ra.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity fix from Mimi Zohar:
"A single bug fix to properly remove all of the securityfs IMA
measurement lists"
* tag 'integrity-v6.10-fix' of ssh://ra.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: fix wrong zero-assignment during securityfs dentry remove
John Hubbard [Fri, 5 Jul 2024 19:57:36 +0000 (09:57 -1000)]
selftests/vDSO: remove duplicate compiler invocations from Makefile
The Makefile open-codes compiler invocations that ../lib.mk already
provides.
Avoid this by using a Make feature that allows setting per-target
variables, which in this case are: CFLAGS and LDFLAGS. This approach
generates the exact same compiler invocations as before, but removes all
of the code duplication, along with the quirky mangled variable names.
So now the Makefile is smaller, less unusual, and easier to read.
The new dependencies are listed after including lib.mk, in order to
let lib.mk provide the first target ("all:"), and are grouped together
with their respective source file dependencies, for visual clarity.
John Hubbard [Fri, 5 Jul 2024 19:57:35 +0000 (09:57 -1000)]
selftests/vDSO: remove partially duplicated "all:" target in Makefile
There were a couple of errors here:
1. TEST_GEN_PROGS was incorrectly prepending $(OUTPUT) to each program
to be built. However, lib.mk already does that because it assumes "bare"
program names are passed in, so this ended up creating
$(OUTPUT)/$(OUTPUT)/file.c, which of course won't work as intended.
2. lib.mk was included before TEST_GEN_PROGS was set, which led to
lib.mk's "all:" target not seeing anything to rebuild.
So nothing worked, which caused the author to force things by creating
an "all:" target locally--while still including ../lib.mk.
Fix all of this by including ../lib.mk at the right place, and removing
the $(OUTPUT) prefix to the programs to be built, and removing the
duplicate "all:" target.
John Hubbard [Fri, 5 Jul 2024 19:57:34 +0000 (09:57 -1000)]
selftests/vDSO: fix clang build errors and warnings
When building with clang, via:
make LLVM=1 -C tools/testing/selftests
...there are several warnings, and an error. This fixes all of those and
allows these tests to run and pass.
1. Fix linker error (undefined reference to memcpy) by providing a local
version of memcpy.
2. clang complains about using this form:
if (g = h & 0xf0000000)
...so factor out the assignment into a separate step.
3. The code is passing a signed const char* to elf_hash(), which expects
a const unsigned char *. There are several callers, so fix this at
the source by allowing the function to accept a signed argument, and
then converting to unsigned operations, once inside the function.
4. clang doesn't have __attribute__((externally_visible)) and generates
a warning to that effect. Fortunately, gcc 12 and gcc 13 do not seem
to require that attribute in order to build, run and pass tests here,
so remove it.
Merge tag 'pci-v6.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci update from Bjorn Helgaas:
- Update MAINTAINERS and CREDITS to credit Gustavo Pimentel with the
Synopsys DesignWare eDMA driver and reflect that he is no longer at
Synopsys and isn't in a position to maintain the DesignWare xData
traffic generator (Bjorn Helgaas)
* tag 'pci-v6.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
CREDITS: Add Synopsys DesignWare eDMA driver for Gustavo Pimentel
MAINTAINERS: Orphan Synopsys DesignWare xData traffic generator
Merge tag 'riscv-for-linus-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for the CMODX example in the recently added icache flushing
prctl()
- A fix to the perf driver to avoid corrupting event data on counter
overflows when external overflow handlers are in use
- A fix to clear all hardware performance monitor events on boot, to
avoid dangling events firmware or previously booted kernels from
triggering spuriously
- A fix to the perf event probing logic to avoid erroneously reporting
the presence of unimplemented counters. This also prevents some
implemented counters from being reported
- A build fix for the vector sigreturn selftest on clang
- A fix to ftrace, which now requires the previously optional index
argument to ftrace_graph_ret_addr()
- A fix to avoid deadlocking if kexec crash handling triggers in an
interrupt context
* tag 'riscv-for-linus-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: kexec: Avoid deadlock in kexec crash path
riscv: stacktrace: fix usage of ftrace_graph_ret_addr()
riscv: selftests: Fix vsetivli args for clang
perf: RISC-V: Check standard event availability
drivers/perf: riscv: Reset the counter to hpmevent mapping while starting cpus
drivers/perf: riscv: Do not update the event data if uptodate
documentation: Fix riscv cmodx example
- xe: migration error handling + typoed register name in gt setup
- i915: usb-c fix to shut up warnings on MTL+
- panthor: fix sync-only jobs + ioctl validation fix to not EINVAL
wrongly
- panel quirks
- nouveau: NULL deref in get_modes
drm core:
- fbdev big endian fix for the dma memory backed variant
drivers/firmware:
- fix sysfb refcounting"
* tag 'drm-fixes-2024-07-05' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/mcr: Avoid clobbering DSS steering
drm/xe: fix error handling in xe_migrate_update_pgtables
drm/ttm: Always take the bo delayed cleanup path for imported bos
drm/fbdev-generic: Fix framebuffer on big endian devices
drm/panthor: Fix sync-only jobs
drm/panthor: Don't check the array stride on empty uobj arrays
drm/amdgpu/atomfirmware: silence UBSAN warning
drm/radeon: check bo_va->bo is non-NULL before using it
drm/amd/display: Fix array-index-out-of-bounds in dml2/FCLKChangeSupport
drm/amd/display: Update efficiency bandwidth for dcn351
drm/amd/display: Fix refresh rate range for some panel
drm/amd/display: Account for cursor prefetch BW in DML1 mode support
drm/amd/display: Add refresh rate range check
drm/amd/display: Reset freesync config before update new state
drm: panel-orientation-quirks: Add labels for both Valve Steam Deck revisions
drm: panel-orientation-quirks: Add quirk for Valve Galileo
drm/i915/display: For MTL+ platforms skip mg dp programming
drm/nouveau: fix null pointer dereference in nouveau_connector_get_modes
firmware: sysfb: Fix reference count of sysfb parent device
Merge tag 'gpio-fixes-for-v6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Two OF lookup quirks and one fix for an issue in the generic gpio-mmio
driver:
- add two OF lookup quirks for TSC2005 and MIPS Lantiq
- don't try to figure out bgpio_bits from the 'ngpios' property in
gpio-mmio"
* tag 'gpio-fixes-for-v6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: of: add polarity quirk for TSC2005
gpio: mmio: do not calculate bgpio_bits via "ngpios"
gpiolib: of: fix lookup quirk for MIPS Lantiq
Merge tag 'tpmdd-next-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull TPM fixes from Jarkko Sakkinen:
"This contains the fixes for !chip->auth condition, preventing the
breakage of:
- tpm_ftpm_tee.c
- tpm_i2c_nuvoton.c
- tpm_ibmvtpm.c
- tpm_tis_i2c_cr50.c
- tpm_vtpm_proxy.c
All drivers will continue to work as they did in 6.9, except a single
warning (dev_warn() not WARN()) is printed to klog only to inform that
authenticated sessions are not enabled"
* tag 'tpmdd-next-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: Address !chip->auth in tpm_buf_append_hmac_session*()
tpm: Address !chip->auth in tpm_buf_append_name()
tpm: Address !chip->auth in tpm2_*_auth_session()
Brian Foster [Wed, 3 Jul 2024 12:13:01 +0000 (08:13 -0400)]
vfs: don't mod negative dentry count when on shrinker list
The nr_dentry_negative counter is intended to only account negative
dentries that are present on the superblock LRU. Therefore, the LRU
add, remove and isolate helpers modify the counter based on whether
the dentry is negative, but the shrinker list related helpers do not
modify the counter, and the paths that change a dentry between
positive and negative only do so if DCACHE_LRU_LIST is set.
The problem with this is that a dentry on a shrinker list still has
DCACHE_LRU_LIST set to indicate ->d_lru is in use. The additional
DCACHE_SHRINK_LIST flag denotes whether the dentry is on LRU or a
shrink related list. Therefore if a relevant operation (i.e. unlink)
occurs while a dentry is present on a shrinker list, and the
associated codepath only checks for DCACHE_LRU_LIST, then it is
technically possible to modify the negative dentry count for a
dentry that is off the LRU. Since the shrinker list related helpers
do not modify the negative dentry count (because non-LRU dentries
should not be included in the count) when the dentry is ultimately
removed from the shrinker list, this can cause the negative dentry
count to become permanently inaccurate.
This problem can be reproduced via a heavy file create/unlink vs.
drop_caches workload. On an 80xcpu system, I start 80 tasks each
running a 1k file create/delete loop, and one task spinning on
drop_caches. After 10 minutes or so of runtime, the idle/clean cache
negative dentry count increases from somewhere in the range of 5-10
entries to several hundred (and increasingly grows beyond
nr_dentry_unused).
Tweak the logic in the paths that turn a dentry negative or positive
to filter out the case where the dentry is present on a shrink
related list. This allows the above workload to maintain an accurate
negative dentry count.
Jeff Layton [Tue, 2 Jul 2024 22:44:48 +0000 (18:44 -0400)]
filelock: fix potential use-after-free in posix_lock_inode
Light Hsieh reported a KASAN UAF warning in trace_posix_lock_inode().
The request pointer had been changed earlier to point to a lock entry
that was added to the inode's list. However, before the tracepoint could
fire, another task raced in and freed that lock.
Fix this by moving the tracepoint inside the spinlock, which should
ensure that this doesn't happen.
This is the third version of this patch series, in which another patch set
is subsumed into this one to avoid confusing the two patch sets.
(https://patchwork.kernel.org/project/linux-fsdevel/list/?series=854914)
We've been testing ondemand mode for cachefiles since January, and we're
almost done. We hit a lot of issues during the testing period, and this
patch series fixes some of the issues. The patches have passed internal
testing without regression.
The following is a brief overview of the patches, see the patches for
more details.
Patch 1-2: Add fscache_try_get_volume() helper function to avoid
fscache_volume use-after-free on cache withdrawal.
Patch 3: Fix cachefiles_lookup_cookie() and cachefiles_withdraw_cache()
concurrency causing cachefiles_volume use-after-free.
Patch 4: Propagate error codes returned by vfs_getxattr() to avoid
endless loops.
Patch 5-7: A read request waiting for reopen could be closed maliciously
before the reopen worker is executing or waiting to be scheduled. So
ondemand_object_worker() may be called after the info and object and even
the cache have been freed and trigger use-after-free. So use
cancel_work_sync() in cachefiles_ondemand_clean_object() to cancel the
reopen worker or wait for it to finish. Since it makes no sense to wait
for the daemon to complete the reopen request, to avoid this pointless
operation blocking cancel_work_sync(), Patch 1 avoids request generation
by the DROPPING state when the request has not been sent, and Patch 2
flushes the requests of the current object before cancel_work_sync().
Patch 8: Cyclic allocation of msg_id to avoid msg_id reuse misleading
the daemon to cause hung.
Patch 9: Hold xas_lock during polling to avoid dereferencing reqs causing
use-after-free. This issue was triggered frequently in our tests, and we
found that anolis 5.10 had fixed it. So to avoid failing the test, this
patch is pushed upstream as well.
Baokun Li (7):
netfs, fscache: export fscache_put_volume() and add
fscache_try_get_volume()
cachefiles: fix slab-use-after-free in fscache_withdraw_volume()
cachefiles: fix slab-use-after-free in cachefiles_withdraw_cookie()
cachefiles: propagate errors from vfs_getxattr() to avoid infinite
loop
cachefiles: stop sending new request when dropping object
cachefiles: cancel all requests for the object that is being dropped
cachefiles: cyclic allocation of msg_id to avoid reuse
Hou Tao (1):
cachefiles: wait for ondemand_object_worker to finish when dropping
object
Jingbo Xu (1):
cachefiles: add missing lock protection when polling
may_open() does not allow a directory to be opened with the write access.
However, some writing flags set by client result in adding write access
on server, making ksmbd incompatible with FUSE file system. Simply, let's
discard the write access when opening a directory.
list_add corruption. next is NULL.
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:26!
pc : __list_add_valid+0x88/0xbc
lr : __list_add_valid+0x88/0xbc
Call trace:
__list_add_valid+0x88/0xbc
fuse_finish_open+0x11c/0x170
fuse_open_common+0x284/0x5e8
fuse_dir_open+0x14/0x24
do_dentry_open+0x2a4/0x4e0
dentry_open+0x50/0x80
smb2_open+0xbe4/0x15a4
handle_ksmbd_work+0x478/0x5ec
process_one_work+0x1b4/0x448
worker_thread+0x25c/0x430
kthread+0x104/0x1d4
ret_from_fork+0x10/0x20
Wolfram Sang [Fri, 5 Jul 2024 14:08:55 +0000 (16:08 +0200)]
Merge tag 'i2c-host-fixes-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
This tag includes a nice fix in the PNX driver that has been
pending for a long time. Piotr has replaced a potential lock in
the interrupt context with a more efficient and straightforward
handling of the timeout signaling.
Vanillan Wang [Fri, 31 May 2024 02:40:12 +0000 (10:40 +0800)]
USB: serial: option: add Rolling RW350-GL variants
Update the USB serial option driver support for the Rolling
RW350-GL
- VID:PID 33f8:0802, RW350-GL are laptop M.2 cards (with
MBIM interfaces for /Linux/Chrome OS)
Mank Wang [Sat, 29 Jun 2024 01:54:45 +0000 (01:54 +0000)]
USB: serial: option: add Netprisma LCUK54 series modules
Add support for Netprisma LCUK54 series modules.
LCUK54-WRD-LWW(0x3731/0x0100): NetPrisma LCUK54-WWD for Global
LCUK54-WRD-LWW(0x3731/0x0101): NetPrisma LCUK54-WRD for Global SKU
LCUK54-WRD-LCN(0x3731/0x0106): NetPrisma LCUK54-WRD for China SKU
LCUK54-WRD-LWW(0x3731/0x0111): NetPrisma LCUK54-WWD for SA
LCUK54-WRD-LWW(0x3731/0x0112): NetPrisma LCUK54-WWD for EU
LCUK54-WRD-LWW(0x3731/0x0113): NetPrisma LCUK54-WWD for NA
LCUK54-WWD-LCN(0x3731/0x0115): NetPrisma LCUK54-WWD for China EDU
LCUK54-WWD-LWW(0x3731/0x0116): NetPrisma LCUK54-WWD for Golbal EDU
Above products use the exact same interface layout and option
driver:
MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL
DTS for Nokia N900 incorrectly specifies "active high" polarity for
the reset line, while the chip documentation actually specifies it as
"active low". In the past the driver fudged gpiod API and inverted
the logic internally, but it was changed in d0d89493bff8.
Lee Jones [Fri, 5 Jul 2024 07:43:39 +0000 (08:43 +0100)]
usb: gadget: configfs: Prevent OOB read/write in usb_string_copy()
Userspace provided string 's' could trivially have the length zero. Left
unchecked this will firstly result in an OOB read in the form
`if (str[0 - 1] == '\n') followed closely by an OOB write in the form
`str[0 - 1] = '\0'`.
There is already a validating check to catch strings that are too long.
Let's supply an additional check for invalid strings that are too short.
Damien Le Moal [Mon, 1 Jul 2024 21:53:26 +0000 (06:53 +0900)]
scsi: sd: Do not repeat the starting disk message
The SCSI disk message "Starting disk" to signal resuming of a suspended
disk is printed in both sd_resume() and sd_resume_common() which results
in this message being printed twice when resuming from e.g. autosuspend:
$ echo 5000 > /sys/block/sda/device/power/autosuspend_delay_ms
$ echo auto > /sys/block/sda/device/power/control
[ 4972.805851] sd 0:0:0:0: [sda] Starting disk
[ 4980.558806] sd 0:0:0:0: [sda] Starting disk
Fix this double print by removing the call to sd_printk() from sd_resume()
and moving the call to sd_printk() in sd_resume_common() earlier in the
function, before the check using sd_do_start_stop(). Doing so, the message
is printed once regardless if sd_resume_common() actually executes
sd_start_stop_device() (i.e. SCSI device case) or not (libsas and libata
managed ATA devices case).
Peter Wang [Fri, 28 Jun 2024 07:00:30 +0000 (15:00 +0800)]
scsi: ufs: core: Fix ufshcd_abort_one racing issue
When ufshcd_abort_one is racing with the completion ISR, the completed tag
of the request's mq_hctx pointer will be set to NULL by ISR. Return
success when request is completed by ISR because ufshcd_abort_one does not
need to do anything.
Below is KE back trace.
ufshcd_try_to_abort_task: cmd at tag 41 not pending in the device.
ufshcd_try_to_abort_task: cmd at tag=41 is cleared.
Aborting tag 41 / CDB 0x28 succeeded
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000194
pc : [0xffffffddd7a79bf8] blk_mq_unique_tag+0x8/0x14
lr : [0xffffffddd6155b84] ufshcd_mcq_req_to_hwq+0x1c/0x40 [ufs_mediatek_mod_ise]
do_mem_abort+0x58/0x118
el1_abort+0x3c/0x5c
el1h_64_sync_handler+0x54/0x90
el1h_64_sync+0x68/0x6c
blk_mq_unique_tag+0x8/0x14
ufshcd_err_handler+0xae4/0xfa8 [ufs_mediatek_mod_ise]
process_one_work+0x208/0x4fc
worker_thread+0x228/0x438
kthread+0x104/0x1d4
ret_from_fork+0x10/0x20
Peter Wang [Fri, 28 Jun 2024 07:00:29 +0000 (15:00 +0800)]
scsi: ufs: core: Fix ufshcd_clear_cmd racing issue
When ufshcd_clear_cmd is racing with the completion ISR, the completed tag
of the request's mq_hctx pointer will be set to NULL by the ISR. And
ufshcd_clear_cmd's call to ufshcd_mcq_req_to_hwq will get NULL pointer KE.
Return success when the request is completed by ISR because sq does not
need cleanup.
dsa: lan9303: Fix mapping between DSA port number and PHY address
The 'phy' parameter supplied to lan9303_phy_read/_write was sometimes a
DSA port number and sometimes a PHY address. This isn't a problem as
long as they are equal. But if the external phy_addr_sel_strap pin is
wired to 'high', the PHY addresses change from 0-1-2 to 1-2-3 (CPU,
slave0, slave1). In this case, lan9303_phy_read/_write must translate
between DSA port numbers and the corresponding PHY address.
Jarkko Sakkinen [Wed, 3 Jul 2024 15:47:46 +0000 (18:47 +0300)]
tpm: Address !chip->auth in tpm_buf_append_hmac_session*()
Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can
cause a null derefence in tpm_buf_hmac_session*(). Thus, address
!chip->auth in tpm_buf_hmac_session*() and remove the fallback
implementation for !TCG_TPM2_HMAC.
Jarkko Sakkinen [Wed, 3 Jul 2024 15:33:14 +0000 (18:33 +0300)]
tpm: Address !chip->auth in tpm_buf_append_name()
Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can
cause a null derefence in tpm_buf_append_name(). Thus, address
!chip->auth in tpm_buf_append_name() and remove the fallback
implementation for !TCG_TPM2_HMAC.
Jarkko Sakkinen [Wed, 3 Jul 2024 16:39:27 +0000 (19:39 +0300)]
tpm: Address !chip->auth in tpm2_*_auth_session()
Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can cause
a null derefence in tpm2_*_auth_session(). Thus, address !chip->auth in
tpm2_*_auth_session().
Merge tag 'for-6.10-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix folio refcounting when releasing them (encoded write, dummy
extent buffer)
- fix out of bounds read when checking qgroup inherit data
- fix how configurable chunk size is handled in zoned mode
- in the ref-verify tool, fix uninitialized return value when checking
extent owner ref and simple quota are not enabled
* tag 'for-6.10-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix folio refcount in __alloc_dummy_extent_buffer()
btrfs: fix folio refcount in btrfs_do_encoded_write()
btrfs: fix uninitialized return value in the ref-verify tool
btrfs: always do the basic checks for btrfs_qgroup_inherit structure
btrfs: zoned: fix calc_available_free_space() for zoned mode
Merge tag 'net-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, wireless and netfilter.
There's one fix for power management with Intel's e1000e here,
Thorsten tells us there's another problem that started in v6.9. We're
trying to wrap that up but I don't think it's blocking.
Current release - new code bugs:
- wifi: mac80211: disable softirqs for queued frame handling
- af_unix: fix uninit-value in __unix_walk_scc(), with the new
garbage collection algo
Previous releases - regressions:
- Bluetooth:
- qca: fix BT enable failure for QCA6390 after warm reboot
- add quirk to ignore reserved PHY bits in LE Extended Adv Report,
abused by some Broadcom controllers found on Apple machines
- wifi: wilc1000: fix ies_len type in connect path
Previous releases - always broken:
- tcp: fix DSACK undo in fast recovery to call tcp_try_to_open(),
avoid premature timeouts
- net: make sure skb_datagram_iter maps fragments page by page, in
case we somehow get compound highmem mixed in
- eth: bnx2x: fix multiple UBSAN array-index-out-of-bounds when more
queues are used
Misc:
- MAINTAINERS: Remembering Larry Finger"
* tag 'net-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
bnxt_en: Fix the resource check condition for RSS contexts
mlxsw: core_linecards: Fix double memory deallocation in case of invalid INI file
inet_diag: Initialize pad field in struct inet_diag_req_v2
tcp: Don't flag tcp_sk(sk)->rx_opt.saw_unknown for TCP AO.
selftests: make order checking verbose in msg_zerocopy selftest
selftests: fix OOM in msg_zerocopy selftest
ice: use proper macro for testing bit
ice: Reject pin requests with unsupported flags
ice: Don't process extts if PTP is disabled
ice: Fix improper extts handling
selftest: af_unix: Add test case for backtrack after finalising SCC.
af_unix: Fix uninit-value in __unix_walk_scc()
bonding: Fix out-of-bounds read in bond_option_arp_ip_targets_set()
net: rswitch: Avoid use-after-free in rswitch_poll()
netfilter: nf_tables: unconditionally flush pending work before notifier
wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference
wifi: iwlwifi: mvm: avoid link lookup in statistics
wifi: iwlwifi: mvm: don't wake up rx_sync_waitq upon RFKILL
wifi: iwlwifi: properly set WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK
wifi: wilc1000: fix ies_len type in connect path
...
thermal: core: Call monitor_thermal_zone() if zone temperature is invalid
Commit 202aa0d4bb53 ("thermal: core: Do not call handle_thermal_trip()
if zone temperature is invalid") caused __thermal_zone_device_update()
to return early if the current thermal zone temperature was invalid.
This was done to avoid running handle_thermal_trip() and governor
callbacks in that case which led to confusion. However, it went too
far because monitor_thermal_zone() still needs to be called even when
the zone temperature is invalid to ensure that it will be updated
eventually in case thermal polling is enabled and the driver has no
other means to notify the core of zone temperature changes (for example,
it does not register an interrupt handler or ACPI notifier).
Also if the .set_trips() zone callback is expected to set up monitoring
interrupts for a thermal zone, it has to be provided with valid
boundaries and that can only happen if the zone temperature is known.
Accordingly, to ensure that __thermal_zone_device_update() will
run again after a failing zone temperature check, make it call
monitor_thermal_zone() regardless of whether or not the zone
temperature is valid and make the latter schedule a thermal zone
temperature update if the zone temperature is invalid even if
polling is not enabled for the thermal zone.
Merge tag 's390-6.10-8' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Fix and add physical to virtual address translations in dasd and
virtio_ccw drivers. For virtio_ccw this is just a minimal fix.
More code cleanup will follow.
- Small defconfig updates
* tag 's390-6.10-8' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/dasd: Fix invalid dereferencing of indirect CCW data pointer
s390/vfio_ccw: Fix target addresses of TIC CCWs
s390: Update defconfigs
Merge tag 'mm-hotfixes-stable-2024-07-03-22-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from, Andrew Morton:
"6 hotfies, all cc:stable. Some fixes for longstanding nilfs2 issues
and three unrelated MM fixes"
* tag 'mm-hotfixes-stable-2024-07-03-22-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
nilfs2: fix incorrect inode allocation from reserved inodes
nilfs2: add missing check for inode numbers on directory entries
nilfs2: fix inode number range checks
mm: avoid overflows in dirty throttling logic
Revert "mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again"
mm: optimize the redundant loop of mm_update_owner_next()
Mark Brown [Thu, 4 Jul 2024 12:05:48 +0000 (13:05 +0100)]
spi: omap2-mcspi: Revert multi mode support
There have been multiple reports that the multi-mode support in the
OMAP2 McSPI driver has caused regressions on existing systems. There's
been some discussion and some proposed changes but nothing that's been
tested by all the reporters. Drop the patch for v6.10, hopefully we can
get to the bottom of the issue and reenable the feature for v6.11.
bnxt_en: Fix the resource check condition for RSS contexts
While creating a new RSS context, bnxt_rfs_capable() currently
makes a strict check to see if the required VNICs are already
available. If the current VNICs are not what is required,
either too many or not enough, it will call the firmware to
reserve the exact number required.
There is a bug in the firmware when the driver tries to
relinquish some reserved VNICs and RSS contexts. It will
cause the default VNIC to lose its RSS configuration and
cause receive packets to be placed incorrectly.
Workaround this problem by skipping the resource reduction.
The driver will not reduce the VNIC and RSS context reservations
when a context is deleted. The resources will be available for
use when new contexts are created later.
Potentially, this workaround can cause us to run out of VNIC
and RSS contexts if there are a lot of VF functions creating
and deleting RSS contexts. In the future, we will conditionally
disable this workaround when the firmware fix is available.
mlxsw: core_linecards: Fix double memory deallocation in case of invalid INI file
In case of invalid INI file mlxsw_linecard_types_init() deallocates memory
but doesn't reset pointer to NULL and returns 0. In case of any error
occurred after mlxsw_linecard_types_init() call, mlxsw_linecards_init()
calls mlxsw_linecard_types_fini() which performs memory deallocation again.
Add pointer reset to NULL.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Jakub Kicinski [Thu, 4 Jul 2024 14:31:54 +0000 (07:31 -0700)]
Merge tag 'wireless-2024-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.10
Hopefully the last fixes for v6.10. Fix a regression in wilc1000
where bitrate Information Elements longer than 255 bytes were broken.
Few fixes also to mac80211 and iwlwifi.
* tag 'wireless-2024-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference
wifi: iwlwifi: mvm: avoid link lookup in statistics
wifi: iwlwifi: mvm: don't wake up rx_sync_waitq upon RFKILL
wifi: iwlwifi: properly set WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK
wifi: wilc1000: fix ies_len type in connect path
wifi: mac80211: fix BSS_CHANGED_UNSOL_BCAST_PROBE_RESP
====================
Paolo Abeni [Thu, 4 Jul 2024 13:31:26 +0000 (15:31 +0200)]
Merge tag 'nf-24-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains a oneliner patch to inconditionally flush
workqueue containing stale objects to be released, syzbot managed to
trigger UaF. Patch from Florian Westphal.
netfilter pull request 24-07-04
* tag 'nf-24-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: unconditionally flush pending work before notifier
====================
Shigeru Yoshida [Wed, 3 Jul 2024 09:16:49 +0000 (18:16 +0900)]
inet_diag: Initialize pad field in struct inet_diag_req_v2
KMSAN reported uninit-value access in raw_lookup() [1]. Diag for raw
sockets uses the pad field in struct inet_diag_req_v2 for the
underlying protocol. This field corresponds to the sdiag_raw_protocol
field in struct inet_diag_req_raw.
inet_diag_get_exact_compat() converts inet_diag_req to
inet_diag_req_v2, but leaves the pad field uninitialized. So the issue
occurs when raw_lookup() accesses the sdiag_raw_protocol field.
Fix this by initializing the pad field in
inet_diag_get_exact_compat(). Also, do the same fix in
inet_diag_dump_compat() to avoid the similar issue in the future.
thermal: gov_power_allocator: Return early in manage if trip_max is NULL
Commit da781936e7c3 ("thermal: gov_power_allocator: Allow binding
without trip points") allowed the governor to bind even when trip_max
is NULL. This allows a NULL pointer dereference to happen in the manage
callback.
Add an early return to prevent it, since the governor is expected to not do
anything in this case.
Kai Vehmanen [Thu, 4 Jul 2024 08:57:08 +0000 (10:57 +0200)]
ASoC: SOF: Intel: hda: fix null deref on system suspend entry
When system enters suspend with an active stream, SOF core
calls hw_params_upon_resume(). On Intel platforms with HDA DMA used
to manage the link DMA, this leads to call chain of
A bug is hit in hda_dai_suspend() as hda_link_dma_cleanup() is run first,
which clears hext_stream->link_substream, and then hda_ipc4_post_trigger()
is called with a NULL snd_pcm_substream pointer.
Johan Hovold [Thu, 4 Jul 2024 10:18:05 +0000 (12:18 +0200)]
serial: qcom-geni: do not kill the machine on fifo underrun
The Qualcomm GENI serial driver did not handle buffer flushing and used
to print discarded characters when the circular buffer was cleared.
Since commit 1788cf6a91d9 ("tty: serial: switch from circ_buf to kfifo")
this instead resulted in a hard lockup due to
qcom_geni_serial_send_chunk_fifo() spinning indefinitely in the
interrupt handler.
The underlying bugs have now been fixed, but make sure to output NUL
characters instead of killing the machine if a similar driver bug is
ever reintroduced.
Johan Hovold [Thu, 4 Jul 2024 10:18:04 +0000 (12:18 +0200)]
serial: qcom-geni: fix hard lockup on buffer flush
The Qualcomm GENI serial driver does not handle buffer flushing and used
to continue printing discarded characters when the circular buffer was
cleared. Since commit 1788cf6a91d9 ("tty: serial: switch from circ_buf
to kfifo") this instead results in a hard lockup due to
qcom_geni_serial_send_chunk_fifo() spinning indefinitely in the
interrupt handler.
This is easily triggered by interrupting a command such as dmesg in a
serial console but can also happen when stopping a serial getty on
reboot.
Implement the flush_buffer() callback and use it to cancel any active TX
command when the write buffer has been emptied.
Johan Hovold [Thu, 4 Jul 2024 10:18:03 +0000 (12:18 +0200)]
serial: qcom-geni: fix soft lockup on sw flow control and suspend
The stop_tx() callback is used to implement software flow control and
must not discard data as the Qualcomm GENI driver is currently doing
when there is an active TX command.
Cancelling an active command can also leave data in the hardware FIFO,
which prevents the watermark interrupt from being enabled when TX is
later restarted. This results in a soft lockup and is easily triggered
by stopping TX using software flow control in a serial console but this
can also happen after suspend.
Fix this by only stopping any active command, and effectively clearing
the hardware fifo, when shutting down the port. When TX is later
restarted, a transfer command may need to be issued to discard any stale
data that could prevent the watermark interrupt from firing.
Wentong Wu [Tue, 25 Jun 2024 08:10:46 +0000 (16:10 +0800)]
mei: vsc: Enhance SPI transfer of IVSC ROM
Before downloading firmware, a command response is required to
identify the silicon. However, when downloading IVSC firmware,
reading data from the SPI transfers with the IVSC ROM is not
necessary. Therefore, the rx buffer of SPI transfer command is
determined based on the specific request of the caller.
projects / linux.git / log