Cezary Rojewski [Mon, 16 May 2022 10:11:04 +0000 (12:11 +0200)]
ASoC: Intel: avs: Generic PCM FE operations
Each stream in AVS is represented by FE and BE domain. FE path stands
for HOST part of the stream while BE stands for LINK (hardware) one.
While BE portion is interface specific, FE is not. Handle all standard
DAI operations to implement FE part of the stream.
Cezary Rojewski [Mon, 16 May 2022 10:11:03 +0000 (12:11 +0200)]
ASoC: Intel: avs: Generic soc component driver
Prepare for concrete PCM operations over HDA, DMIC and I2S interfaces by
providing generic soc component implementation. Interface-specific
components re-use this code as majority of flow is shared.
Cezary Rojewski [Mon, 16 May 2022 10:11:02 +0000 (12:11 +0200)]
ASoC: Intel: avs: Account for libraries when booting basefw
Not all modules are part of base firmware. Some are part of loadable
libraries. These need to be loaded after base firmware reports ready
status through FW_READY notification.
Their loading process is similar to the base firmware's one. Request the
binary file, verify and strip the manifest and load the actual code into
DSP memory with help of CLDMA or HD-Audio render stream, depending on
audio device generation.
List of libraries needed for loading is obtained through the topology -
vendor sections specifying the name of firmware files to request.
This patch provides mediatek adsp ipc support for SOF.
ADSP IPC protocol offers (send/recv) interfaces using
mediatek-mailbox APIs.
This patch was tested and confirmed to work with SOF fw on
MT8195 cherry board and MT8186 krabby board.
changes since v8:
- fix patchset 2 and 3.
move "depends on MTK_ADSP_IPC" from SND_SOC_SOF_MTK_COMMON
to SND_SOC_SOF_MT8195/MT8186 to prevent generating wrong
config.
changes since v7:
- rebase to linux-next/next-22020504
- use EXPORT_SYMBOL_GPL instead of EXPORT_SYMBOL in mtk-adsp-ipc.c
- move mtk-adsp-ipc.c out from driver/firmware/mediatek
- add user of mtk-adsp-ipc.h in patchset 2 and 3.
changes since v6:
- rebase to matthias.bgg/linux.git, v5.18-next/soc
- Prefer "GPL" over "GPL v2" for MODULE_LICENSE
changes since v5:
- fix WARNING: modpost: missing MODULE_LICENSE() in drivers/mailbox
/mtk-adsp-mailbox.o. Add MODULE_LICENSE in the last line.
- Due to WARNING: Missing or malformed SPDX-License-Identifier tag
in line 1 in checkpatch, we don't remove SPDX-License in line 1.
changes since v4:
- add error message for wrong mbox chan
changes since v3:
- rebase on v5.16-rc8
- update reviewers
changes since v2:
- add out tag for two memory free phases
changes since v1:
- add comments for mtk_adsp_ipc_send and mtk_adsp_ipc_recv
- remove useless MODULE_LICENSE
- change label name to out_free
Allen-KH Cheng (1):
ASoC: SOF: mediatek: Add ipc support for mt8195
Lin Ma [Mon, 16 May 2022 09:20:35 +0000 (17:20 +0800)]
ASoC: rt5645: Fix errorenous cleanup order
There is a logic error when removing rt5645 device as the function
rt5645_i2c_remove() first cancel the &rt5645->jack_detect_work and
delete the &rt5645->btn_check_timer latter. However, since the timer
handler rt5645_btn_check_callback() will re-queue the jack_detect_work,
this cleanup order is buggy.
That is, once the del_timer_sync in rt5645_i2c_remove is concurrently
run with the rt5645_btn_check_callback, the canceled jack_detect_work
will be rescheduled again, leading to possible use-after-free.
This patch fix the issue by placing the del_timer_sync function before
the cancel_delayed_work_sync.
Charles Keepax [Fri, 13 May 2022 09:05:32 +0000 (10:05 +0100)]
ASoC: soc-component: Update handling to component delays
Currently the checking for if a component sits on the CPU or CODEC side
of the DAI link is done with a helper function that checks if the
component defines legacy_dai_naming. However, there are already a couple
of CPU side components that explicitly opt in to non-legacy DAI naming
and it doesn't seem like a very robust solution. Rather than looking for
the flag check if the component is attached to any of the CODEC DAIs on
the DAI link. This is more robust and helps to bring the core further in
the direction of a component being a generic block rather than being
classified as platform or CODEC drivers.
Charles Keepax [Fri, 13 May 2022 09:05:31 +0000 (10:05 +0100)]
ASoC: core: Pass legacy_dai_naming flag directly
Passing the result of the helper function snd_soc_component_is_codec
to snd_soc_register_dai is less clear than just passing the DAI
naming flag directly. snd_soc_register_dai wants to know if it
should use the legacy DAI naming. The CODEC distinction is more
of a historical thing and not obviously directly related, and there
are already a couple of CPU side components that explicitly opt in
to non-legacy DAI naming.
Miaoqian Lin [Thu, 12 May 2022 11:13:30 +0000 (15:13 +0400)]
ASoC: ti: j721e-evm: Fix refcount leak in j721e_soc_probe_*
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not needed anymore.
Add missing of_node_put() to avoid refcount leak.
Tinghan Shen [Thu, 12 May 2022 08:22:15 +0000 (16:22 +0800)]
ASoC: SOF: mediatek: Add mt8186 ipc support
mt8186 DSP uses two hardware mailbox IP to communicate with AP.
One mailbox is used for requests coming from AP, and the other
one is for requests from DSP.
Shengjiu Wang [Mon, 16 May 2022 08:06:12 +0000 (16:06 +0800)]
ASoC: fsl_sai: Add support for i.MX8ULP
Add i.MX8ULP specific soc data, the max register is FSL_SAI_RTCAP
the IP version is also 0x0301, So version can't be used for the
condition of register FSL_SAI_MCTL setting.
Shengjiu Wang [Mon, 16 May 2022 08:06:10 +0000 (16:06 +0800)]
ASoC: fsl_sai: Add support for i.MX8MM
On i.MX8MM the max register is FSL_SAI_MCTL, which is
different with previous platform, so add max_register in
soc data to distinguish platforms.
And add specific soc data for i.MX8MM
Hui Tang [Thu, 12 May 2022 07:46:39 +0000 (15:46 +0800)]
ASoC: max98396: Fix build error for implicit function declaration
sound/soc/codecs/max98396.c: In function ‘max98396_i2c_probe’:
sound/soc/codecs/max98396.c:1555:25: error: implicit declaration of function ‘devm_gpiod_get_optional’; did you mean ‘devm_regulator_get_optional’? [-Werror=implicit-function-declaration]
max98396->reset_gpio = devm_gpiod_get_optional(&i2c->dev,
^~~~~~~~~~~~~~~~~~~~~~~
devm_regulator_get_optional
sound/soc/codecs/max98396.c:1556:23: error: ‘GPIOD_OUT_HIGH’ undeclared (first use in this function); did you mean ‘GPIOF_INIT_HIGH’?
"reset", GPIOD_OUT_HIGH);
^~~~~~~~~~~~~~
GPIOF_INIT_HIGH
sound/soc/codecs/max98396.c:1556:23: note: each undeclared identifier is reported only once for each function it appears in
sound/soc/codecs/max98396.c:1565:3: error: implicit declaration of function ‘gpiod_set_value_cansleep’; did you mean ‘gpio_set_value_cansleep’? [-Werror=implicit-function-declaration]
gpiod_set_value_cansleep(max98396->reset_gpio, 0);
^~~~~~~~~~~~~~~~~~~~~~~~
gpio_set_value_cansleep
cc1: all warnings being treated as errors
Miaoqian Lin [Thu, 12 May 2022 04:38:28 +0000 (08:38 +0400)]
ASoC: samsung: Fix refcount leak in aries_audio_probe
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
If extcon_find_edev_by_node() fails, it doesn't call of_node_put()
Calling of_node_put() after extcon_find_edev_by_node() to fix this.
ASoC: SOF: Intel: HDA: Set up sof_ipc4_fw_data for IPC4
Allocate the sof_ipc4_fw_data struct for IPC4 and set the fw header offset
for the platforms which will be used by the core when loading the firmware
image.
The core expects that the "private" field in struct snd_sof_dev (which is
unused today with IPC3) is used to save this data.
Define and add the FW loader ops for IPC4. Also, introduce a new
structure, struct sof_ipc4_private_data that will be used to define some
IPC4-sepcific data.
Add a struct sof_ipc4_fw_data to hold the firmware module data and
manifest FW header offset.
The FW reports data about the modules supported by the base FW in its
manifest and the FW header offset is platform dependent information.
This structure will be allocated when the ops are initialized for each
platform and populated when the FW is loaded.
Charles Keepax [Tue, 10 May 2022 15:38:43 +0000 (16:38 +0100)]
ASoC: wm9090: Remove redundant endianness flag
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device has no DAI links and as such the flag would have
no effect, remove the redundant flag.
Charles Keepax [Tue, 10 May 2022 15:38:42 +0000 (16:38 +0100)]
ASoC: wm2000: Remove redundant endianness flag
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device has no DAI links and as such the flag would have
no effect, remove the redundant flag.
Miaoqian Lin [Wed, 11 May 2022 05:27:40 +0000 (09:27 +0400)]
ASoC: imx-hdmi: Fix refcount leak in imx_hdmi_probe
of_find_device_by_node() takes reference, we should use put_device()
to release it. when devm_kzalloc() fails, it doesn't have a
put_device(), it will cause refcount leak.
Add missing put_device() to fix this.
Shengjiu Wang [Tue, 10 May 2022 11:56:48 +0000 (19:56 +0800)]
ASoC: fsl_ssi: Add support multi fifo script
With dual fifo enabled, the case that recording mono sound
in the background, playback mono sound twice in parallal,
at second time playback sound may distort, the possible
reason is using dual fifo to playback mono sound is not
recommended.
This patch is to provide a option to use multi fifo script,
which can be dynamically configured as one fifo or two fifo
mode.
Shengjiu Wang [Mon, 9 May 2022 09:14:22 +0000 (17:14 +0800)]
ASoC: fsl_micfil: Add support for i.MX8MPlus
On i.MX8Plus there are two updates for micfil module.
One is that the output format is S32_LE, only the 24 more
significative bits have information, the other bits are always
zero. Add 'formats' variable in soc data to distinguish the
format on different platform.
Another is that the fifo depth is 32 entries.
YC Hung [Mon, 9 May 2022 17:04:25 +0000 (12:04 -0500)]
ASoC: SOF: ipc: introduce cont_update_posn in sof_ipc_stream_params struct
The host stream position is updated when no_stream_position is set as 0.
However current implementation updates host stream position only when
report data is larger than or equal to host period size which is decided
by the period size of host side. It maybe cause host stream position
update not in time. Therefore this patch introduces another field
"cont_update_posn", a boolean value aimed to update host stream position
continuously and based on period size of pipeline. It can get better
precise when need to update host stream position from firmware.
Brent Lu [Mon, 9 May 2022 17:09:21 +0000 (12:09 -0500)]
ASoC: Intel: sof_ssp_amp: fix no DMIC BE Link on Chromebooks
The SOF topology supports 2 BE Links(dmic01 and dmic16k) and each
link supports up to four DMICs. However, Chromebook does not implement
ACPI NHLT table so the mach->mach_params.dmic_num is always zero. We
add a quirk so machine driver knows it's running on a Chromebook and
need to create BE Links for DMIC.
Before componentisation any part registered as a CODEC would have
automatically supported both little and big endian, ie. the core
would duplicate any supported LE or BE PCM format to support the other
endian as well. As componentisation removed the distinction between
CODEC drivers and platform drivers, a flag was added to specify
if this behaviour is required for a particular component. However,
as most systems tend to use little endian the absence of the flag
is rarely noticed. Also the naming of the flag "endianness" is a
little unobvious as to if it should be applied to a particular
component.
This series adds a comment to better explain the meaning of the
flag and then tidys up the usage of the flag. A couple of uses
of the flag are removed where is has been used inappropriately
on the CPU side of the DAI link, this is clearly not valid in the
cases it has been used, and I suspect never would be valid. Then
some redundant formats are removed, since they would be covered by
existing endianness flags. And finally a bunch of devices that are
missing the flag have it added.
It is worth noting that since componenisation there are now a couple
of cases where it is not entire clear to me that the flag should
be applied to all CODECs as it was before. In those cases I haven't
updated the driver to add the flag and they are outlined here:
1) Build into the AP CODECs, these are actual silicon inside the main
processor and they typically receive audio directly from an internal
bus. It is not obvious to me that these can happily ignore endian. On
the CODEC side these include: jz4725b.c, jz4760.c, jz4770.c,
rk3328_codec.c, lpass-va-macro.c, lpass-rx-macro.c, lpass-tx-macro.c,
lpass-wsa-macro.c. There are also some examples of this scattered
around the various platform support directories in sound/soc.
2) Devices behind non-audio buses, SPI just moves bits and doesn't
really define an endian for audio data on the bus. Thus it seems the
CODEC probably can care about the endian. The only devices that fall
into this group (mostly for AoV) are: rt5514-spi.c, rt5677-spi.c,
cros_ec_codec.c (only the AoV).
3) CODECs with no DAIs, these could specify the flag and plenty of
them do; CODECs from the initial conversion to componentisation. But
the flag makes no difference here since there is nothing for it to
apply to. This includes purely analogue CODECs: aw8738.c, ssm2305.c,
tpa6130a2.c, tda7419.c, max9759.c, max9768.c, max9877.c, lm4857.c,
simple-mux.c, simple-amplifier.c. And devices that only do jack
detection: ts3a227e.c, mt6359-accdet.c.
If there are any opinions on adding the flag to any of those three
groups they would be greatfully received. But I am leaning towards
leaving 1,2 without endianness flags since it feels inappropriate,
and removing the endian flag from devices in catagory 3 that already
have it. Assuming no one objects to that I will do a follow up
series for that.
The current IPC client infrastructure can only be used with IPC3.
This series carries updates for the core side of the client support to handle
IPC4 messages and updates the ipc message injector to be usable with IPC4.
The IPC flood test is only supported by SOF_IPC (IPC3), we are not going to
create the aux device for it at all if the firmware is using IPC4.
Regards,
Peter
---
Peter Ujfalusi (8):
ASoC: SOF: sof-client: Add API to get the maximum IPC payload size
ASoC: SOF: ipc-msg-injector: Query the maximum IPC payload size
ASoC: SOF: sof-client-probes: Query the maximum IPC payload size
ASoC: SOF: sof-client: Add API to get the ipc_type
ASoC: SOF: sof-client: Add support IPC4 message sending
ASoC: SOF: ipc-msg-injector: Separate the message sending
ASoC: SOF: ipc-msg-injector: Add support for IPC4 messages
ASoC: SOF: sof-client: IPC flood test can only work with SOF_IPC
ASoC: dt-bindings: mediatek: mt8192: Drop i2s-share properties
This reverts commit e056cf4341 ("ASoC: dt-bindings: mediatek: mt8192: Add
i2s-share properties") which was merged while the property name and
definition were still being discussed. Revert the commit for now and a
follow up commit will re-add the property after it is further discussed
and reviewed.
YueHaibing [Mon, 9 May 2022 12:09:18 +0000 (20:09 +0800)]
ASoC: mediatek: mt8195: Fix build warning without CONFIG_OF
sound/soc/mediatek/mt8195/mt8195-mt6359.c:1639:32: warning: ‘mt8195_mt6359_max98390_rt5682_card’ defined but not used [-Wunused-variable]
1639 | static struct mt8195_card_data mt8195_mt6359_max98390_rt5682_card = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/soc/mediatek/mt8195/mt8195-mt6359.c:1634:32: warning: ‘mt8195_mt6359_rt1011_rt5682_card’ defined but not used [-Wunused-variable]
1634 | static struct mt8195_card_data mt8195_mt6359_rt1011_rt5682_card = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/soc/mediatek/mt8195/mt8195-mt6359.c:1629:32: warning: ‘mt8195_mt6359_rt1019_rt5682_card’ defined but not used [-Wunused-variable]
1629 | static struct mt8195_card_data mt8195_mt6359_rt1019_rt5682_card = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Since all users of this driver do need CONFIG_OF anyway, there is no
need to save a few bytes on kernel builds while CONFIG_OF disabled, so
just remove the #ifdef to fix this warning.
Lukasz Majewski [Mon, 9 May 2022 12:10:55 +0000 (14:10 +0200)]
ASoC: wm8940: add devicetree support
This adds devicetree support to the wm8940 codec driver.
With a DT-based kernel, there is no board-specific setting
to select the driver so allow it to be manually chosen.
Peter Ujfalusi [Fri, 6 May 2022 13:26:40 +0000 (16:26 +0300)]
ASoC: SOF: sof-client: Add API to get the maximum IPC payload size
Provide a way for the client drivers to query the maximum payload size of
an IPC message.
Currently clients do not have access to this information and they can only
use the SOF_IPC_MSG_MAX_SIZE defined value.
These patches add properties that were missing on the dt-bindings of the
audio components used by mt8192-asurada. Namely the i2s-share
properties for the sound platform and the #sound-dai-cells on the
rt1015p and rt5682 codecs when they're referenced by the machine sound
node.
Nícolas F. R. A. Prado (3):
ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties
ASoC: dt-bindings: rt1015p: Add #sound-dai-cells
ASoC: dt-bindings: rt5682: Add #sound-dai-cells
The rt5682 codec can be pointed to through a sound-dai property to be
used as part of a machine sound driver. dtc expects #sound-dai-cells to
be defined in the codec's node in those cases, so add it in the
dt-binding and set it to 0.
The rt1015p codec can be pointed to through a sound-dai property to be
used as part of a machine sound driver. dtc expects #sound-dai-cells to
be defined in the codec's node in those cases, so add it in the
dt-binding and set it to 0.
Charles Keepax [Wed, 4 May 2022 17:09:05 +0000 (18:09 +0100)]
ASoC: sdw-mockup: Add endianness flag in snd_soc_component_driver
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over a SoundWire DAI and as such
should have endianness applied.
Charles Keepax [Wed, 4 May 2022 17:09:04 +0000 (18:09 +0100)]
ASoC: wsa881x: Add endianness flag in snd_soc_component_driver
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over a SoundWire DAI and as such
should have endianness applied.
Charles Keepax [Wed, 4 May 2022 17:09:03 +0000 (18:09 +0100)]
ASoC: wcd938x: Add endianness flag in snd_soc_component_driver
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over a SoundWire DAI and as such
should have endianness applied.
Charles Keepax [Wed, 4 May 2022 17:09:02 +0000 (18:09 +0100)]
ASoC: rt1316-sdw: Add endianness flag in snd_soc_component_driver
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over a SoundWire DAI and as such
should have endianness applied.
Charles Keepax [Wed, 4 May 2022 17:09:01 +0000 (18:09 +0100)]
ASoC: rt1308-sdw: Add endianness flag in snd_soc_component_driver
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over a SoundWire DAI and as such
should have endianness applied.
Charles Keepax [Wed, 4 May 2022 17:09:00 +0000 (18:09 +0100)]
ASoC: rt715-sdca: Add endianness flag in snd_soc_component_driver
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over a SoundWire DAI and as such
should have endianness applied.
Charles Keepax [Wed, 4 May 2022 17:08:59 +0000 (18:08 +0100)]
ASoC: rt715: Add endianness flag in snd_soc_component_driver
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over a SoundWire DAI and as such
should have endianness applied.
Charles Keepax [Wed, 4 May 2022 17:08:58 +0000 (18:08 +0100)]
ASoC: rt711-sdca: Add endianness flag in snd_soc_component_driver
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over a SoundWire DAI and as such
should have endianness applied.
Charles Keepax [Wed, 4 May 2022 17:08:57 +0000 (18:08 +0100)]
ASoC: rt711: Add endianness flag in snd_soc_component_driver
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over a SoundWire DAI and as such
should have endianness applied.
Charles Keepax [Wed, 4 May 2022 17:08:56 +0000 (18:08 +0100)]
ASoC: rt700: Add endianness flag in snd_soc_component_driver
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over a SoundWire DAI and as such
should have endianness applied.
Charles Keepax [Wed, 4 May 2022 17:08:55 +0000 (18:08 +0100)]
ASoC: wcd9335: Add endianness flag in snd_soc_component_driver
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over a SLIMbus DAI and as such should
have endianness applied.
Charles Keepax [Wed, 4 May 2022 17:08:54 +0000 (18:08 +0100)]
ASoC: wcd934x: Add endianness flag in snd_soc_component_driver
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over a SLIMbus DAI and as such should
have endianness applied.
Charles Keepax [Wed, 4 May 2022 17:08:53 +0000 (18:08 +0100)]
ASoC: cros_ec_codec: Add endianness flag in i2s_rx_component_driver
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. The i2s_rx component receives audio over an I2S DAI and as such
should have endianness applied.
A fixup is also required to use the width directly rather than relying
on the format in hw_params, now both little and big endian would be
supported.
Charles Keepax [Wed, 4 May 2022 17:08:52 +0000 (18:08 +0100)]
ASoC: tscs454: Add endianness flag in snd_soc_component_driver
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over an I2S DAI and as such should
have endianness applied.
A fixup is also required to use the width directly rather than relying
on the format in hw_params, now both little and big endian would be
supported. It is worth noting this changes the behaviour of S24_LE to
use a word length of 24 rather than 32. This would appear to be a
correction since the fact S24_LE is stored as 32 bits should not be
presented over the bus.
Charles Keepax [Wed, 4 May 2022 17:08:51 +0000 (18:08 +0100)]
ASoC: tlv320adc3xxx: Add endianness flag in snd_soc_component_driver
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over an I2S DAI and as such should
have endianness applied.
A fixup is also required to use the width directly rather than relying
on the format in hw_params, now both little and big endian would be
supported.
Charles Keepax [Wed, 4 May 2022 17:08:50 +0000 (18:08 +0100)]
ASoC: rt9120: Add endianness flag in snd_soc_component_driver
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over an I2S DAI and as such should
have endianness applied.
Charles Keepax [Wed, 4 May 2022 17:08:49 +0000 (18:08 +0100)]
ASoC: rt1019: Add endianness flag in snd_soc_component_driver
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over an I2S DAI and as such should
have endianness applied.
Charles Keepax [Wed, 4 May 2022 17:08:48 +0000 (18:08 +0100)]
ASoC: pcm3060: Add endianness flag in snd_soc_component_driver
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over an I2S DAI and as such should
have endianness applied.
Charles Keepax [Wed, 4 May 2022 17:08:47 +0000 (18:08 +0100)]
ASoC: mt6660: Add endianness flag in snd_soc_component_driver
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over an I2S DAI and as such should
have endianness applied.
Charles Keepax [Wed, 4 May 2022 17:08:46 +0000 (18:08 +0100)]
ASoC: mt6359: Add endianness flag in snd_soc_component_driver
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over an I2S DAI and as such should
have endianness applied.
As the core will now expand the formats to cover both endian types,
remove the redundant manual specification of both.
Charles Keepax [Wed, 4 May 2022 17:08:45 +0000 (18:08 +0100)]
ASoC: mt6358: Add endianness flag in snd_soc_component_driver
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over an I2S DAI and as such should
have endianness applied.
As the core will now expand the formats to cover both endian types,
remove the redundant manual specification of both.
Charles Keepax [Wed, 4 May 2022 17:08:44 +0000 (18:08 +0100)]
ASoC: mt6351: Add endianness flag in snd_soc_component_driver
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over an I2S DAI and as such should
have endianness applied.
As the core will now expand the formats to cover both endian types,
remove the redundant manual specification of both.
Charles Keepax [Wed, 4 May 2022 17:08:43 +0000 (18:08 +0100)]
ASoC: lochnagar: Add endianness flag in snd_soc_component_driver
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over an I2S DAI and as such should
have endianness applied.
Charles Keepax [Wed, 4 May 2022 17:08:42 +0000 (18:08 +0100)]
ASoC: cx2072x: Add endianness flag in snd_soc_component_driver
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over an I2S DAI and as such should
have endianness applied.
Charles Keepax [Wed, 4 May 2022 17:08:41 +0000 (18:08 +0100)]
ASoC: cs35l41: Add endianness flag in snd_soc_component_driver
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over an I2S DAI and as such should
have endianness applied.
Charles Keepax [Wed, 4 May 2022 17:08:40 +0000 (18:08 +0100)]
ASoC: cs4234: Add endianness flag in snd_soc_component_driver
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over an I2S DAI and as such should
have endianness applied.
Charles Keepax [Wed, 4 May 2022 17:08:39 +0000 (18:08 +0100)]
ASoC: adau1372: Add endianness flag in snd_soc_component_driver
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over an I2S DAI and as such should
have endianness applied.
projects / linux.git / log