Yu Zhao [Mon, 7 Jan 2019 22:51:15 +0000 (15:51 -0700)]
drm/amdgpu: validate user GEM object size
When creating frame buffer, userspace may request to attach to a
previously allocated GEM object that is smaller than what GPU
requires. Validation must be done to prevent out-of-bound DMA,
otherwise it could be exploited to reveal sensitive data.
This fix is not done in a common code path because individual
driver might have different requirement.
Yu Zhao [Mon, 7 Jan 2019 22:51:14 +0000 (15:51 -0700)]
drm/amdgpu: validate user pitch alignment
Userspace may request pitch alignment that is not supported by GPU.
Some requests 32, but GPU ignores it and uses default 64 when cpp is
4. If GEM object is allocated based on the smaller alignment, GPU
DMA will go out of bound.
David Herrmann [Tue, 8 Jan 2019 12:58:52 +0000 (13:58 +0100)]
fork: record start_time late
This changes the fork(2) syscall to record the process start_time after
initializing the basic task structure but still before making the new
process visible to user-space.
Technically, we could record the start_time anytime during fork(2). But
this might lead to scenarios where a start_time is recorded long before
a process becomes visible to user-space. For instance, with
userfaultfd(2) and TLS, user-space can delay the execution of fork(2)
for an indefinite amount of time (and will, if this causes network
access, or similar).
By recording the start_time late, it much closer reflects the point in
time where the process becomes live and can be observed by other
processes.
Lastly, this makes it much harder for user-space to predict and control
the start_time they get assigned. Previously, user-space could fork a
process and stall it in copy_thread_tls() before its pid is allocated,
but after its start_time is recorded. This can be misused to later-on
cycle through PIDs and resume the stalled fork(2) yielding a process
that has the same pid and start_time as a process that existed before.
This can be used to circumvent security systems that identify processes
by their pid+start_time combination.
Even though user-space was always aware that start_time recording is
flaky (but several projects are known to still rely on start_time-based
identification), changing the start_time to be recorded late will help
mitigate existing attacks and make it much harder for user-space to
control the start_time a process gets assigned.
tools include uapi: Sync linux/vhost.h with the kernel sources
To get the changes in:
4b86713236e4 ("vhost: split structs into a separate header file")
Silencing this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h'
diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h
Those didn't touch things used in tools, i.e. the following continues
working:
tools include uapi: Sync linux/fs.h copy with the kernel sources
To get the changes in:
e262e32d6bde ("vfs: Suppress MS_* flag defs within the kernel unless explicitly enabled")
That made the mount flags string table generator to switch to using
mount.h instead.
This silences the following perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h'
diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h
We were using a copy of uapi/linux/fs.h to create the mount syscall
'flags' string table to use in 'perf trace', to convert from the number
obtained via the raw_syscalls:sys_enter into a string, using
tools/perf/trace/beauty/mount_flags.sh, but in e262e32d6bde ("vfs:
Suppress MS_* flag defs within the kernel unless explicitly enabled")
those defines got moved to linux/mount.h, so grab a copy of mount.h too.
Keep the uapi/linux/fs.h as we'll use it for the SEEK_ constants.
Alex Williamson [Tue, 8 Jan 2019 05:13:22 +0000 (22:13 -0700)]
vfio/type1: Fix unmap overflow off-by-one
The below referenced commit adds a test for integer overflow, but in
doing so prevents the unmap ioctl from ever including the last page of
the address space. Subtract one to compare to the last address of the
unmap to avoid the overflow and wrap-around.
perf top: Lift restriction on using callchains without "sym" in --sort
This restriction is not present in 'perf report' and since 'perf top'
uses the same hists browser, remove it from it as well.
With this we create per event buckets with callchain trees, so that
# perf top --sort dso -g --no-children
Bucketizes samples by DSO and below it shows the callchains leading to
functions in this DSO.
Try also:
# perf top -e sched:*switch -g --no-children
To see the callchains leading to sched switches, pressing 'E' to expand
all one can quickly see the most common scheduler switches and what
leads to them, for instance, calls to IO, futexes, etc.
tools lib traceevent: Remove tep_data_event_from_type() API
In order to make libtraceevent into a proper library, its API
should be straightforward.
After discussion with Steven Rostedt, we decided to remove the
tep_data_event_from_type() API and to replace it with tep_find_event(),
as it does the same.
tools lib traceevent: Changed return logic of tep_register_event_handler() API
In order to make libtraceevent into a proper library, its API
should be straightforward.
The tep_register_event_handler() functions returns -1 in case it
successfully registers the new event handler. Such return code is used
by the other library APIs in case of an error.
To unify the return logic of tep_register_event_handler() with the other
APIs, this patch introduces enum tep_reg_handler, which is used by this
function as return value, to handle all possible successful return
cases.
tools lib traceevent: Changed return logic of trace_seq_printf() and trace_seq_vprintf() APIs
In order to make libtraceevent into a proper library, its API should be
straightforward.
The trace_seq_printf() and trace_seq_vprintf() APIs have inconsistent
returned values with the other trace_seq_* APIs.
This path changes the return logic of trace_seq_printf() and
trace_seq_vprintf() to return the number of printed characters, as the
other trace_seq_* related APIs.
tools lib traceevent: Rename struct cmdline to struct tep_cmdline
In order to make libtraceevent a proper library, variables, data
structures and functions should have a unique prefix to prevent name
space conflicts. That prefix will be "tep_".
This patch renames 'struct cmdline' to 'struct tep_cmdline'.
tools lib traceevent: Initialize host_bigendian at tep_handle allocation
This patch initializes the host_bigendian member of the tep_handle
structure with the byte order of the current host, when this handler is
created - in tep_alloc() API. We need this in order to remove the
tep_set_host_bigendian() API.
tools lib traceevent: Introduce new libtracevent API: tep_override_comm()
This patch adds a new API of tracevent library: tep_override_comm() It
registers a pid / command mapping. If a mapping with the same pid
already exists, the entry is updated with the new command.
Florian Fainelli [Fri, 21 Dec 2018 03:43:37 +0000 (19:43 -0800)]
perf tests: Add a test for the ARM 32-bit [vectors] page
perf on ARM requires CONFIG_KUSER_HELPERS to be turned on to allow some
independance with respect to the ARM CPU being used. Add a test which
tries to locate the [vectors] page, created when CONFIG_KUSER_HELPERS is
turned on to help asses the system's health.
Florian Fainelli [Fri, 21 Dec 2018 03:43:36 +0000 (19:43 -0800)]
perf tools: Make find_vdso_map() more modular
In preparation for checking that the vectors page on the ARM
architecture, refactor the find_vdso_map() function to accept finding an
arbitrary string and create a dedicated helper function for that under
util/find-map.c and update the filename to find-map.c and all references
to it: perf-read-vdso.c and util/vdso.c.
At some point we'll get that poll sys_exit event and will print a "[continued]" line.
While making the sizing of the alignment after the syscall arg list and
its result configurable, so that we can mimic strace, which uses a
smaller alingment by default, a bug was introduced where the closing
parens appeared before the syscall name and its arg list, fix it.
Guo Ren [Tue, 8 Jan 2019 12:49:24 +0000 (20:49 +0800)]
irqchip/csky: fixup handle_irq_perbit break irq
The handle_irq_perbit function loop every bit in hwirq local variable.
handle_irq_perbit(hwirq) {
for_everyt_bit_in(hwirq) {
handle_domain_irq()
->irq_exit()
->invoke_softirq()
->__do_softirq()
->local_irq_enable() // Here will cause new interrupt.
}
}
When new interrupt coming at local_irq_enable, it will finish another
interrupt handler and pull down the interrupt source. But hwirq is the
local variable for handle_irq_perbit(), it can't get new interrupt
controller pending reg status. So we need update hwirq with pending reg
in every loop.
Also change write_relax to writel could prevent stw from fast retire.
When local_irq is enabled, intc regs is really set-in.
Masahiro Yamada [Tue, 8 Jan 2019 03:08:03 +0000 (12:08 +0900)]
vfio/pci: set TRACE_INCLUDE_PATH to fix the build error
drivers/vfio/pci/vfio_pci_nvlink2.c cannot be compiled for in-tree
building.
CC drivers/vfio/pci/vfio_pci_nvlink2.o
In file included from drivers/vfio/pci/trace.h:102,
from drivers/vfio/pci/vfio_pci_nvlink2.c:29:
./include/trace/define_trace.h:89:42: fatal error: ./trace.h: No such file or directory
#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
^
compilation terminated.
make[1]: *** [scripts/Makefile.build;277: drivers/vfio/pci/vfio_pci_nvlink2.o] Error 1
To fix the build error, let's tell include/trace/define_trace.h the
location of drivers/vfio/pci/trace.h
Hauke Mehrtens [Sun, 6 Jan 2019 18:50:37 +0000 (19:50 +0100)]
serial: lantiq: Do not swap register read/writes
The ltq_r32() and ltq_w32() macros use the __raw_readl() and
__raw_writel() functions which do not swap the value to little endian.
On the big endian vrx200 SoC the UART is operated in big endian IO mode,
the readl() and write() functions convert the value to little endian
first and then the driver does not work any more on this SoC.
Currently the vrx200 SoC selects the CONFIG_SWAP_IO_SPACE option,
without this option the serial driver would work, but PCI devices do not
work any more.
This patch makes the driver use the __raw_readl() and __raw_writel()
functions which do not swap the endianness. On big endian system it is
assumed that the device should be access in big endian IO mode and on a
little endian system it would be access in little endian mode.
Fixes: 89b8bd2082bb ("serial: lantiq: Use readl/writel instead of ltq_r32/ltq_w32") Signed-off-by: Hauke Mehrtens <[email protected]> Acked-by: John Crispin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
stw is fast retire instruction. When PC is run at enable interrupt
stage, the clear interrupt source hasn't finished. It will cause another
wrong irq-enter.
Corentin Labbe [Mon, 7 Jan 2019 17:22:23 +0000 (17:22 +0000)]
PCI: amlogic: Fix build failure due to missing gpio header
Building the driver when GPIOLIB=n is not selected is causing the following
compilation failure:
drivers/pci/controller/dwc/pci-meson.c: In function 'meson_pcie_assert_reset':
drivers/pci/controller/dwc/pci-meson.c:290:2: error: implicit declaration of function 'gpiod_set_value_cansleep'; did you mean 'gpio_set_value_cansleep'? [-Werror=implicit-function-declaration]
gpiod_set_value_cansleep(mp->reset_gpio, 0);
^~~~~~~~~~~~~~~~~~~~~~~~
gpio_set_value_cansleep
drivers/pci/controller/dwc/pci-meson.c: In function 'meson_pcie_probe':
drivers/pci/controller/dwc/pci-meson.c:540:19: error: implicit declaration of function 'devm_gpiod_get'; did you mean 'devm_gpio_free'? [-Werror=implicit-function-declaration]
mp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
^~~~~~~~~~~~~~
devm_gpio_free
drivers/pci/controller/dwc/pci-meson.c:540:48: error: 'GPIOD_OUT_LOW' undeclared (first use in this function); did you mean 'GPIOF_INIT_LOW'?
mp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
^~~~~~~~~~~~~
GPIOF_INIT_LOW
Add the missing linux/gpio/consumer.h header to fix it.
We are trying to get rid of BUS_ATTR() so drop the last user of it from
the tree. We had to "open code" it in order to prevent a function name
conflict due to the use of DEVICE_ATTR_WO() earlier in the file :(
driver core: bus: convert to use BUS_ATTR_WO and RW
We are trying to get rid of BUS_ATTR() and the usage of that in bus.c
can be trivially converted to use BUS_ATTR_WO and RW, so use those
macros instead.
Luis Chamberlain [Wed, 19 Dec 2018 20:30:34 +0000 (12:30 -0800)]
dma-mapping: remove dma_zalloc_coherent()
dma_zalloc_coherent() is no longer needed as it has no users because
dma_alloc_coherent() already zeroes out memory for us.
The Coccinelle grammar rule that used to check for dma_alloc_coherent()
+ memset() is modified so that it just tells the user that the memset is
not needed anymore.
Luis Chamberlain [Wed, 19 Dec 2018 20:24:08 +0000 (12:24 -0800)]
cross-tree: phase out dma_zalloc_coherent() on headers
The last few stragglers coccinelle doesn't pick up are on driver
specific header files. Phase those out as well as dma_alloc_coherent()
zeroes out the memory as well now too.
mtd: rawnand: qcom: fix memory corruption that causes panic
This patch fixes a memory corruption that occurred in the
qcom-nandc driver since it was converted to nand_scan().
On boot, an affected device will panic from a NPE at a weird place:
| Unable to handle kernel NULL pointer dereference at virtual address 0
| pgd = (ptrval)
| [00000000] *pgd=00000000
| Internal error: Oops: 80000005 [#1] SMP ARM
| CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.9 #0
| Hardware name: Generic DT based system
| PC is at (null)
| LR is at nand_block_isbad+0x90/0xa4
| pc : [<00000000>] lr : [<c0592240>] psr: 80000013
| sp : cf839d40 ip : 00000000 fp : cfae9e20
| r10: cf815810 r9 : 00000000 r8 : 00000000
| r7 : 00000000 r6 : 00000000 r5 : 00000001 r4 : cf815810
| r3 : 00000000 r2 : cfae9810 r1 : ffffffff r0 : cf815810
| Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
| Control: 10c5387d Table: 8020406a DAC: 00000051
| Process swapper/0 (pid: 1, stack limit = 0x(ptrval))
| [<c0592240>] (nand_block_isbad) from [<c0580a94>]
| [<c0580a94>] (allocate_partition) from [<c05811e4>]
| [<c05811e4>] (add_mtd_partitions) from [<c0581164>]
| [<c0581164>] (parse_mtd_partitions) from [<c057def4>]
| [<c057def4>] (mtd_device_parse_register) from [<c059d274>]
| [<c059d274>] (qcom_nandc_probe) from [<c0567f00>]
The problem is that the nand_scan()'s qcom_nand_attach_chip callback
is updating the nandc->max_cwperpage from 1 to 4. This causes the
sg_init_table of clear_bam_transaction() in the driver's
qcom_nandc_block_bad() to memset much more than what was initially
allocated by alloc_bam_transaction().
This patch restores the old behavior by reallocating the shared bam
transaction alloc_bam_transaction() after the chip was identified,
but before mtd_device_parse_register() (which is an alias for
mtd_device_register() - see panic) gets called. This fixes the
corruption and the driver is working again.
Sudeep Holla [Mon, 7 Jan 2019 18:51:53 +0000 (18:51 +0000)]
cpufreq: check if policy is inactive early in __cpufreq_get()
cpuinfo_cur_freq gets current CPU frequency as detected by hardware
while scaling_cur_freq last known CPU frequency. Some platforms may not
allow checking the CPU frequency of an offline CPU or the associated
resources may have been released via cpufreq_exit when the CPU gets
offlined, in which case the policy would have been invalidated already.
If we attempt to get current frequency from the hardware, it may result
in hang or crash.
For example on Juno, I see:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000188
[0000000000000188] pgd=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 5 PID: 4202 Comm: cat Not tainted 4.20.0-08251-ga0f2c0318a15-dirty #87
Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform
pstate: 40000005 (nZcv daif -PAN -UAO)
pc : scmi_cpufreq_get_rate+0x34/0xb0
lr : scmi_cpufreq_get_rate+0x34/0xb0
Call trace:
scmi_cpufreq_get_rate+0x34/0xb0
__cpufreq_get+0x34/0xc0
show_cpuinfo_cur_freq+0x24/0x78
show+0x40/0x60
sysfs_kf_seq_show+0xc0/0x148
kernfs_seq_show+0x44/0x50
seq_read+0xd4/0x480
kernfs_fop_read+0x15c/0x208
__vfs_read+0x60/0x188
vfs_read+0x94/0x150
ksys_read+0x6c/0xd8
__arm64_sys_read+0x24/0x30
el0_svc_common+0x78/0x100
el0_svc_handler+0x38/0x78
el0_svc+0x8/0xc
---[ end trace 3d1024e58f77f6b2 ]---
So fix the issue by checking if the policy is invalid early in
__cpufreq_get before attempting to get the current frequency.
Qian Cai [Mon, 7 Jan 2019 16:42:07 +0000 (16:42 +0000)]
ACPI/IORT: Fix build when CONFIG_IOMMU_API=n
Commit 8097e53eaba2 ("ACPI/IORT: Use helper functions to access
dev->iommu_fwspec") changed by mistake the iort_fwspec_iommu_ops() stub
definition (compiled in when CONFIG_IOMMU_API=n), that caused the
following compilation failure:
drivers/acpi/arm64/iort.c:880:1: error: expected identifier or
'(' before '{' token
{ return NULL; }
^
drivers/acpi/arm64/iort.c:879:39: warning: 'iort_fwspec_iommu_ops'
used but never defined
static inline const struct iommu_ops *iort_fwspec_iommu_ops(struct device *dev);
^~~~~~~~~~~~~~~~~~~~~
Palmer Dabbelt [Mon, 7 Jan 2019 16:45:47 +0000 (08:45 -0800)]
Fix a handful of audit-related issue
This is sort of a mix between a new feature and a bug fix. I've managed
to screw up merging this patch set a handful of times but I think it's
OK this time around. The main new feature here is audit support for
RISC-V, with some fixes to audit-related bugs that cropped up along the
way:
* The addition of NR_syscalls into unistd.h, which is necessary for
CONFIG_FTRACE_SYSCALLS.
* The definition of CREATE_TRACE_POINTS so
__tracepoint_sys_{enter,exit} get defined.
* A fix for trace_sys_exit() so we can enable
CONFIG_HAVE_SYSCALL_TRACEPOINTS.
Jack Stocker [Thu, 3 Jan 2019 21:56:53 +0000 (21:56 +0000)]
USB: Add USB_QUIRK_DELAY_CTRL_MSG quirk for Corsair K70 RGB
To match the Corsair Strafe RGB, the Corsair K70 RGB also requires
USB_QUIRK_DELAY_CTRL_MSG to completely resolve boot connection issues
discussed here: https://github.com/ckb-next/ckb-next/issues/42.
Otherwise roughly 1 in 10 boots the keyboard will fail to be detected.
Patch that applied delay control quirk for Corsair Strafe RGB: cb88a0588717 ("usb: quirks: add control message delay for 1b1c:1b20")
Previous K70 RGB patch to add delay-init quirk: 7a1646d92257 ("Add delay-init quirk for Corsair K70 RGB keyboards")
Saranya Gopal [Sun, 6 Jan 2019 02:44:02 +0000 (08:14 +0530)]
usbcore: Select only first configuration for non-UAC3 compliant devices
In most of the UAC1 and UAC2 audio devices, the first
configuration is most often the best configuration.
However, with recent patch to support UAC3 configuration,
second configuration was unintentionally chosen for
some of the UAC1/2 devices that had more than one
configuration. This was because of the existing check
after the audio config check which selected any config
which had a non-vendor class. This patch fixes this issue.
Icenowy Zheng [Thu, 3 Jan 2019 03:26:18 +0000 (11:26 +0800)]
USB: storage: add quirk for SMI SM3350
The SMI SM3350 USB-UFS bridge controller cannot handle long sense request
correctly and will make the chip refuse to do read/write when requested
long sense.
Icenowy Zheng [Thu, 3 Jan 2019 03:26:17 +0000 (11:26 +0800)]
USB: storage: don't insert sane sense for SPC3+ when bad sense specified
Currently the code will set US_FL_SANE_SENSE flag unconditionally if
device claims SPC3+, however we should allow US_FL_BAD_SENSE flag to
prevent this behavior, because SMI SM3350 UFS-USB bridge controller,
which claims SPC4, will show strange behavior with 96-byte sense
(put the chip into a wrong state that cannot read/write anything).
Check the presence of US_FL_BAD_SENSE when assuming US_FL_SANE_SENSE on
SPC4+ devices.
Define CREATE_TRACE_POINTS in order to create functions and structures
for the trace events. This is needed if HAVE_SYSCALL_TRACEPOINTS and
CONFIG_FTRACE_SYSCALLS are enabled, otherwise we get linking errors:
[..]
MODPOST vmlinux.o
kernel/trace/trace_syscalls.o: In function `.L0 ':
trace_syscalls.c:(.text+0x1152): undefined reference to `__tracepoint_sys_enter'
trace_syscalls.c:(.text+0x126c): undefined reference to `__tracepoint_sys_enter'
trace_syscalls.c:(.text+0x1328): undefined reference to `__tracepoint_sys_enter'
trace_syscalls.c:(.text+0x14aa): undefined reference to `__tracepoint_sys_enter'
trace_syscalls.c:(.text+0x1684): undefined reference to `__tracepoint_sys_exit'
trace_syscalls.c:(.text+0x17a0): undefined reference to `__tracepoint_sys_exit'
trace_syscalls.c:(.text+0x185c): undefined reference to `__tracepoint_sys_exit'
trace_syscalls.c:(.text+0x19de): undefined reference to `__tracepoint_sys_exit'
arch/riscv/kernel/ptrace.o: In function `.L0 ':
ptrace.c:(.text+0x4dc): undefined reference to `__tracepoint_sys_enter'
ptrace.c:(.text+0x632): undefined reference to `__tracepoint_sys_exit'
make: *** [Makefile:1036: vmlinux] Error 1
Signed-off-by: David Abdurachmanov <[email protected]> Fixes: b78002b395b4 ("riscv: add HAVE_SYSCALL_TRACEPOINTS to Kconfig") Signed-off-by: Palmer Dabbelt <[email protected]>
Zong Li [Fri, 7 Dec 2018 09:02:16 +0000 (17:02 +0800)]
RISC-V: Support MODULE_SECTIONS mechanism on RV32
This patch supports dynamic generate got and plt sections mechanism on
rv32. It contains the modification as follows:
- Always enable MODULE_SECTIONS (both rv64 and rv32)
- Change the fixed size type.
This patch had been tested by following modules:
btrfs 6795991 0 - Live 0xa544b000
test_static_keys 17304 0 - Live 0xa28be000
zstd_compress 1198986 1 btrfs, Live 0xa2a25000
zstd_decompress 608112 1 btrfs, Live 0xa24e7000
lzo 8787 0 - Live 0xa2049000
xor 27461 1 btrfs, Live 0xa2041000
zram 78849 0 - Live 0xa2276000
netdevsim 55909 0 - Live 0xa202d000
tun 211534 0 - Live 0xa21b5000
fuse 566049 0 - Live 0xa25fb000
nfs_layout_flexfiles 192597 0 - Live 0xa229b000
ramoops 74895 0 - Live 0xa2019000
xfs 3973221 0 - Live 0xa507f000
libcrc32c 3053 2 btrfs,xfs, Live 0xa34af000
lzo_compress 17302 2 btrfs,lzo, Live 0xa347d000
lzo_decompress 7178 2 btrfs,lzo, Live 0xa3451000
raid6_pq 142086 1 btrfs, Live 0xa33a4000
reed_solomon 31022 1 ramoops, Live 0xa31eb000
test_bitmap 3734 0 - Live 0xa31af000
test_bpf 1588736 0 - Live 0xa2c11000
test_kmod 41161 0 - Live 0xa29f8000
test_module 1356 0 - Live 0xa299e000
test_printf 6024 0 [permanent], Live 0xa2971000
test_static_key_base 5797 1 test_static_keys, Live 0xa2931000
test_user_copy 4382 0 - Live 0xa28c9000
xxhash 70501 2 zstd_compress,zstd_decompress, Live 0xa2055000
Paul Walmsley [Tue, 18 Dec 2018 03:15:12 +0000 (19:15 -0800)]
arch: riscv: support kernel command line forcing when no DTB passed
CONFIG_CMDLINE_FORCE doesn't work on RISC-V when no DTB is passed into
the kernel. This is because the code that forces the kernel command
line only runs if a valid DTB is present at boot. During debugging,
it's useful to have the ability to force kernel command lines even
when no DTB is present. This patch adds support for doing so.
Aurelien Jarno [Tue, 25 Dec 2018 14:46:24 +0000 (15:46 +0100)]
tools uapi: fix RISC-V 64-bit support
The BPF library is not built on 64-bit RISC-V, as the BPF feature is
not detected. Looking more in details, feature/test-bpf.c fails to build
with the following error:
| In file included from /tmp/linux-4.19.12/tools/include/uapi/asm/bitsperlong.h:17,
| from /tmp/linux-4.19.12/tools/include/uapi/asm-generic/unistd.h:2,
| from /usr/include/riscv64-linux-gnu/asm/unistd.h:1,
| from test-bpf.c:2:
| /tmp/linux-4.19.12/tools/include/asm-generic/bitsperlong.h:14:2: error: #error Inconsistent word size. Check asm/bitsperlong.h
| #error Inconsistent word size. Check asm/bitsperlong.h
| ^~~~~
The UAPI from the tools directory is missing RISC-V support, therefore
bitsperlong.h from asm-generic is used, defaulting to 32 bits.
Fix that by adding tools/arch/riscv/include/uapi/asm/bitsperlong.h as
a copy of arch/riscv/include/uapi/asm/bitsperlong.h and by updating
tools/include/uapi/asm/bitsperlong.h.
Anup Patel [Wed, 19 Dec 2018 12:36:57 +0000 (18:06 +0530)]
RISC-V: Make BSS section as the last section in vmlinux.lds.S
The objcopy only emits loadable sections when creating flat kernel
Image. To have minimal possible size of flat kernel Image, we should
have all non-loadable sections after loadable sections.
Currently, execption table section (loadable section) is after BSS
section (non-loadable section) in the RISC-V vmlinux.lds.S. This
is not optimal for having minimal flat kernel Image size hence this
patch makes BSS section as the last section in RISC-V vmlinux.lds.S.
In addition, we make BSS section aligned to 16byte instead of PAGE
aligned which further reduces flat kernel Image size by few KBs.
The flat kernel Image size of Linux-4.20-rc4 using GCC 8.2.0 is 8819980 bytes with current RISC-V vmlinux.lds.S and it reduces to 7991740 bytes with this patch applied. In summary, this patch reduces
Linux-4.20-rc4 flat kernel Image size by 809 KB.
reset: uniphier-usb3: Rename to reset-uniphier-glue
This driver works for controlling the reset lines including USB3
glue layer, however, this can be applied to other glue layers.
Now this patch renames the driver from "reset-uniphier-usb3" to
"reset-uniphier-glue".
At the same time, this changes CONFIG_RESET_UNIPHIER_USB3 to
CONFIG_RESET_UNIPHIER_GLUE.
dt-bindings: reset: uniphier: Replace the expression of USB3 with generic peripherals
Replace the expression of "USB3 glue layer" with the glue layer of the
generic peripherals to allow other devices to use it. The reset control
belongs to this glue layer.
Dinh Nguyen [Tue, 13 Nov 2018 18:50:48 +0000 (12:50 -0600)]
reset: socfpga: add an early reset driver for SoCFPGA
Create a separate reset driver that uses the reset operations in
reset-simple. The reset driver for the SoCFPGA platform needs to
register early in order to be able bring online timers that needed
early in the kernel bootup.
We do not need this early reset driver for Stratix10, because on
arm64, Linux does not need the timers are that in reset. Linux is
able to run just fine with the internal armv8 timer. Thus, we use
a new binding "altr,stratix10-rst-mgr" for the Stratix10 platform.
The Stratix10 platform will continue to use the reset-simple platform
driver, while the 32-bit platforms(Cyclone5/Arria5/Arria10) will use
the early reset driver.
Colin Ian King [Wed, 14 Nov 2018 21:49:35 +0000 (21:49 +0000)]
reset: fix null pointer dereference on dev by dev_name
The call to dev_name will dereference dev, however, dev is later
being null checked, so there is a possibility of a null pointer
dereference on dev by the call to dev_name. Fix this by null
checking dev first before the call to dev_name
Detected by CoverityScan, CID#1475475 ("Dereference before null check")
Fixes: 2a6cb2b1d83b ("reset: Add reset_control_get_count()") Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Philipp Zabel <[email protected]>
Currently the reset core has internal support for counting the number of
resets for a device described in DT. Generalize this to devices using
lookup resets, and export it for public use.
This will be used by generic drivers that need to be sure a device is
controlled by a single, dedicated reset line (e.g. vfio-platform).
Eugeniy Paltsev [Wed, 17 Oct 2018 14:05:52 +0000 (17:05 +0300)]
ARC: HSDK: improve reset driver
As for today HSDK reset driver implements only .reset() callback.
In case of driver which implements one of standard
reset controller usage pattern
(call *_deassert() in probe(), call *_assert() in remove())
that leads to inoperability of this reset driver.
Improve HSDK reset driver by calling .reset() callback inside of
.deassert() callback to avoid each reset controller
user adaptation for work with both reset methods
(reset() and {.assert() & .deassert()} pair)
Larry Finger [Thu, 3 Jan 2019 02:12:47 +0000 (20:12 -0600)]
staging: rtl8188eu: Fix module loading from tasklet for WEP encryption
Commit 2b2ea09e74a5 ("staging:r8188eu: Use lib80211 to decrypt WEP-frames")
causes scheduling while atomic bugs followed by a hard freeze whenever
the driver tries to connect to a WEP-encrypted network. Experimentation
showed that the freezes were eliminated when module lib80211 was
preloaded, which can be forced by calling lib80211_get_crypto_ops()
directly rather than indirectly through try_then_request_module().
With this change, no BUG messages are logged.
Larry Finger [Thu, 3 Jan 2019 02:12:46 +0000 (20:12 -0600)]
staging: rtl8188eu: Fix module loading from tasklet for CCMP encryption
Commit 6bd082af7e36 ("staging:r8188eu: use lib80211 CCMP decrypt")
causes scheduling while atomic bugs followed by a hard freeze whenever
the driver tries to connect to a CCMP-encrypted network. Experimentation
showed that the freezes were eliminated when module lib80211 was
preloaded, which can be forced by calling lib80211_get_crypto_ops()
directly rather than indirectly through try_then_request_module().
With this change, no BUG messages are logged.
Biju Das [Wed, 12 Dec 2018 12:17:11 +0000 (12:17 +0000)]
soc: renesas: r8a774c0-sysc: Fix initialization order of 3DG-{A,B}
The workaround for the wrong hierarchy of the 3DG-{A,B} power domains on
RZ/G2E ES1.0 corrected the parent domains. However, the 3DG-{A,B} power
domains were still initialized and powered in the wrong order, causing
3DG operation to fail.
Fix this by changing the order in the table at runtime, when running on
an affected SoC.
This work is based on the work done by Geert for R-Car E3.
Boris Brezillon [Wed, 2 Jan 2019 14:36:54 +0000 (15:36 +0100)]
mtd: Check add_mtd_device() ret code
add_mtd_device() can fail. We should always check its return value
and gracefully handle the failure case. Fix the call sites where this
not done (in mtdpart.c) and add a __must_check attribute to the
prototype to avoid this kind of mistakes.
Boris Brezillon [Wed, 2 Jan 2019 14:36:53 +0000 (15:36 +0100)]
mtd: Fix the check on nvmem_register() ret code
Commit 20167b70c894 ("nvmem: use EOPNOTSUPP instead of ENOSYS") changed
the nvmem_register() ret code from ENOSYS to EOPNOTSUPP when
CONFIG_NVMEM is not enabled, but the check in mtd_nvmem_add() was not
adjusted accordingly.
Arnd Bergmann [Mon, 10 Dec 2018 21:00:23 +0000 (22:00 +0100)]
ARM: shmobile: fix build regressions
A number of Kconfig options have become available now to random ARM
platforms outside of ARCH_MULTIPLATFORM, which now causes Kconfig
warnings, and other build errors when those select options that
lack additional dependencies, e.g.:
WARNING: unmet direct dependencies detected for HAVE_ARM_ARCH_TIMER
Depends on [n]: CPU_V7 [=n]
Selected by [y]:
- ARCH_RCAR_GEN2 [=y] && SOC_RENESAS [=y]
- ARCH_R8A73A4 [=y] && SOC_RENESAS [=y] && ARM [=y]
WARNING: unmet direct dependencies detected for SYS_SUPPORTS_EM_STI
Depends on [n]: GENERIC_CLOCKEVENTS [=n]
Selected by [y]:
- ARCH_EMEV2 [=y] && SOC_RENESAS [=y] && ARM [=y]
Put the old dependency on ARCH_RENESAS back for the moment to restore
the previous behavior.
The current-source used for the battery temp-sensor (TS) is shared with the
GPADC. For proper fuel-gauge and charger operation the TS current-source
needs to be permanently on. But to read the GPADC we need to temporary
switch the TS current-source to ondemand, so that the GPADC can use it,
otherwise we will always read an all 0 value.
The switching from on to on-ondemand is not necessary when the TS
current-source is off (this happens on devices which do not have a TS).
Prior to this commit there were 2 issues with our handling of the TS
current-source switching:
1) We were writing hardcoded values to the ADC TS pin-ctrl register,
overwriting various other unrelated bits. Specifically we were overwriting
the current-source setting for the TS and GPIO0 pins, forcing it to 80ųA
independent of its original setting. On a Chuwi Vi10 tablet this was
causing us to get a too high adc value (due to a too high current-source)
resulting in acpi_lpat_raw_to_temp() returning -ENOENT, resulting in:
ACPI Error: AE_ERROR, Returned by Handler for [UserDefinedRegion]
ACPI Error: Method parse/execution failed \_SB.SXP1._TMP, AE_ERROR
This commit fixes this by using regmap_update_bits to change only the
relevant bits.
2) At the end of intel_xpower_pmic_get_raw_temp() we were unconditionally
enabling the TS current-source even on devices where the TS-pin is not used
and the current-source thus was off on entry of the function.
This commit fixes this by checking if the TS current-source is off when
entering intel_xpower_pmic_get_raw_temp() and if so it is left as is.
Hui Peng [Tue, 25 Dec 2018 23:11:52 +0000 (18:11 -0500)]
ALSA: usb-audio: Fix an out-of-bound read in create_composite_quirks
In `create_composite_quirk`, the terminating condition of for loops is
`quirk->ifnum < 0`. So any composite quirks should end with `struct
snd_usb_audio_quirk` object with ifnum < 0.
for (quirk = quirk_comp->data; quirk->ifnum >= 0; ++quirk) {
.....
}
the data field of Bower's & Wilkins PX headphones usb device device quirks
do not end with {.ifnum = -1}, wihch may result in out-of-bound read.
This Patch fix the bug by adding an ending quirk object.
Takashi Iwai [Wed, 2 Jan 2019 16:12:21 +0000 (17:12 +0100)]
ALSA: usb-audio: Always check descriptor sizes in parser code
There are a few places where we access the data without checking the
actual object size from the USB audio descriptor. This may result in
OOB access, as recently reported.
This patch addresses these missing checks. Most of added codes are
simple bLength checks in the caller side. For the input and output
terminal parsers, we put the length check in the parser functions.
For the input terminal, a new argument is added to distinguish between
UAC1 and the rest, as they treat different objects.
Takashi Iwai [Wed, 19 Dec 2018 13:04:47 +0000 (14:04 +0100)]
ALSA: usb-audio: Check mixer unit descriptors more strictly
We've had some sanity checks of the mixer unit descriptors but they
are too loose and some corner cases are overlooked. Add more strict
checks in uac_mixer_unit_get_channels() for avoiding possible OOB
accesses by malformed descriptors.
This also changes the semantics of uac_mixer_unit_get_channels()
slightly. Now it returns zero for the cases where the descriptor
lacks of bmControls instead of -EINVAL. Then the caller side skips
the mixer creation for such unit while it keeps parsing it.
This corresponds to the case like Maya44.
Takashi Iwai [Wed, 19 Dec 2018 11:36:27 +0000 (12:36 +0100)]
ALSA: usb-audio: Avoid access before bLength check in build_audio_procunit()
The parser for the processing unit reads bNrInPins field before the
bLength sanity check, which may lead to an out-of-bound access when a
malformed descriptor is given. Fix it by assignment after the bLength
check.
It's rude to crash the system just because the developer did something
wrong, as it prevents them from usually even seeing what went wrong.
So convert the few BUG_ON() calls that have snuck into the sysfs code
over the years to WARN_ON() to make it more "friendly". All of these
are able to be recovered from, so it makes no sense to crash.
Linus Torvalds [Mon, 7 Jan 2019 00:33:10 +0000 (16:33 -0800)]
Merge tag 'kbuild-v4.21-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- improve boolinit.cocci and use_after_iter.cocci semantic patches
- fix alignment for kallsyms
- move 'asm goto' compiler test to Kconfig and clean up jump_label
CONFIG option
- generate asm-generic wrappers automatically if arch does not
implement mandatory UAPI headers
- remove redundant generic-y defines
- misc cleanups
* tag 'kbuild-v4.21-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: rename generated .*conf-cfg to *conf-cfg
kbuild: remove unnecessary stubs for archheader and archscripts
kbuild: use assignment instead of define ... endef for filechk_* rules
arch: remove redundant UAPI generic-y defines
kbuild: generate asm-generic wrappers if mandatory headers are missing
arch: remove stale comments "UAPI Header export list"
riscv: remove redundant kernel-space generic-y
kbuild: change filechk to surround the given command with { }
kbuild: remove redundant target cleaning on failure
kbuild: clean up rule_dtc_dt_yaml
kbuild: remove UIMAGE_IN and UIMAGE_OUT
jump_label: move 'asm goto' support test to Kconfig
kallsyms: lower alignment on ARM
scripts: coccinelle: boolinit: drop warnings on named constants
scripts: coccinelle: check for redeclaration
kconfig: remove unused "file" field of yylval union
nds32: remove redundant kernel-space generic-y
nios2: remove unneeded HAS_DMA define
Linus Torvalds [Mon, 7 Jan 2019 00:30:14 +0000 (16:30 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf tooling updates form Ingo Molnar:
"A final batch of perf tooling changes: mostly fixes and small
improvements"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits)
perf session: Add comment for perf_session__register_idle_thread()
perf thread-stack: Fix thread stack processing for the idle task
perf thread-stack: Allocate an array of thread stacks
perf thread-stack: Factor out thread_stack__init()
perf thread-stack: Allow for a thread stack array
perf thread-stack: Avoid direct reference to the thread's stack
perf thread-stack: Tidy thread_stack__bottom() usage
perf thread-stack: Simplify some code in thread_stack__process()
tools gpio: Allow overriding CFLAGS
tools power turbostat: Override CFLAGS assignments and add LDFLAGS to build command
tools thermal tmon: Allow overriding CFLAGS assignments
tools power x86_energy_perf_policy: Override CFLAGS assignments and add LDFLAGS to build command
perf c2c: Increase the HITM ratio limit for displayed cachelines
perf c2c: Change the default coalesce setup
perf trace beauty ioctl: Beautify USBDEVFS_ commands
perf trace beauty: Export function to get the files for a thread
perf trace: Wire up ioctl's USBDEBFS_ cmd table generator
perf beauty ioctl: Add generator for USBDEVFS_ ioctl commands
tools headers uapi: Grab a copy of usbdevice_fs.h
perf trace: Store the major number for a file when storing its pathname
...
Linus Torvalds [Sun, 6 Jan 2019 01:50:59 +0000 (17:50 -0800)]
Change mincore() to count "mapped" pages rather than "cached" pages
The semantics of what "in core" means for the mincore() system call are
somewhat unclear, but Linux has always (since 2.3.52, which is when
mincore() was initially done) treated it as "page is available in page
cache" rather than "page is mapped in the mapping".
The problem with that traditional semantic is that it exposes a lot of
system cache state that it really probably shouldn't, and that users
shouldn't really even care about.
So let's try to avoid that information leak by simply changing the
semantics to be that mincore() counts actual mapped pages, not pages
that might be cheaply mapped if they were faulted (note the "might be"
part of the old semantics: being in the cache doesn't actually guarantee
that you can access them without IO anyway, since things like network
filesystems may have to revalidate the cache before use).
In many ways the old semantics were somewhat insane even aside from the
information leak issue. From the very beginning (and that beginning is
a long time ago: 2.3.52 was released in March 2000, I think), the code
had a comment saying
Later we can get more picky about what "in core" means precisely.
and this is that "later". Admittedly it is much later than is really
comfortable.
NOTE! This is a real semantic change, and it is for example known to
change the output of "fincore", since that program literally does a
mmmap without populating it, and then doing "mincore()" on that mapping
that doesn't actually have any pages in it.
I'm hoping that nobody actually has any workflow that cares, and the
info leak is real.
We may have to do something different if it turns out that people have
valid reasons to want the old semantics, and if we can limit the
information leak sanely.
Linus Torvalds [Sun, 6 Jan 2019 19:15:04 +0000 (11:15 -0800)]
Fix 'acccess_ok()' on alpha and SH
Commit 594cc251fdd0 ("make 'user_access_begin()' do 'access_ok()'")
broke both alpha and SH booting in qemu, as noticed by Guenter Roeck.
It turns out that the bug wasn't actually in that commit itself (which
would have been surprising: it was mostly a no-op), but in how the
addition of access_ok() to the strncpy_from_user() and strnlen_user()
functions now triggered the case where those functions would test the
access of the very last byte of the user address space.
The string functions actually did that user range test before too, but
they did it manually by just comparing against user_addr_max(). But
with user_access_begin() doing the check (using "access_ok()"), it now
exposed problems in the architecture implementations of that function.
For example, on alpha, the access_ok() helper macro looked like this:
and what it basically tests is of any of the high bits get set (the
USER_DS masking value is 0xfffffc0000000000).
And that's completely wrong for the "addr+size" check. Because it's
off-by-one for the case where we check to the very end of the user
address space, which is exactly what the strn*_user() functions do.
Why? Because "addr+size" will be exactly the size of the address space,
so trying to access the last byte of the user address space will fail
the __access_ok() check, even though it shouldn't. As a result, the
user string accessor functions failed consistently - because they
literally don't know how long the string is going to be, and the max
access is going to be that last byte of the user address space.
Side note: that alpha macro is buggy for another reason too - it re-uses
the arguments twice.
And SH has another version of almost the exact same bug:
#define __addr_ok(addr) \
((unsigned long __force)(addr) < current_thread_info()->addr_limit.seg)
so far so good: yes, a user address must be below the limit. But then:
is wrong with the exact same off-by-one case: the case when "addr+size"
is exactly _equal_ to the limit is actually perfectly fine (think "one
byte access at the last address of the user address space")
The SH version is actually seriously buggy in another way: it doesn't
actually check for overflow, even though it did copy the _comment_ that
talks about overflow.
So it turns out that both SH and alpha actually have completely buggy
implementations of access_ok(), but they happened to work in practice
(although the SH overflow one is a serious serious security bug, not
that anybody likely cares about SH security).
This fixes the problems by using a similar macro on both alpha and SH.
It isn't trying to be clever, the end address is based on this logic:
unsigned long __ao_end = __ao_a + __ao_b - !!__ao_b;
which basically says "add start and length, and then subtract one unless
the length was zero". We can't subtract one for a zero length, or we'd
just hit an underflow instead.
For a lot of access_ok() users the length is a constant, so this isn't
actually as expensive as it initially looks.
Linus Torvalds [Sun, 6 Jan 2019 20:19:23 +0000 (12:19 -0800)]
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bug fixes from Ted Ts'o:
"Fix a number of ext4 bugs"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix special inode number checks in __ext4_iget()
ext4: track writeback errors using the generic tracking infrastructure
ext4: use ext4_write_inode() when fsyncing w/o a journal
ext4: avoid kernel warning when writing the superblock to a dead device
ext4: fix a potential fiemap/page fault deadlock w/ inline_data
ext4: make sure enough credits are reserved for dioread_nolock writes
Linus Torvalds [Sun, 6 Jan 2019 19:47:26 +0000 (11:47 -0800)]
Merge tag 'dma-mapping-4.21-1' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
"Fix various regressions introduced in this cycles:
- fix dma-debug tracking for the map_page / map_single
consolidatation
- properly stub out DMA mapping symbols for !HAS_DMA builds to avoid
link failures
- fix AMD Gart direct mappings
- setup the dma address for no kernel mappings using the remap
allocator"
* tag 'dma-mapping-4.21-1' of git://git.infradead.org/users/hch/dma-mapping:
dma-direct: fix DMA_ATTR_NO_KERNEL_MAPPING for remapped allocations
x86/amd_gart: fix unmapping of non-GART mappings
dma-mapping: remove a few unused exports
dma-mapping: properly stub out the DMA API for !CONFIG_HAS_DMA
dma-mapping: remove dmam_{declare,release}_coherent_memory
dma-mapping: implement dmam_alloc_coherent using dmam_alloc_attrs
dma-mapping: implement dma_map_single_attrs using dma_map_page_attrs
Linus Torvalds [Sun, 6 Jan 2019 19:40:06 +0000 (11:40 -0800)]
Merge tag 'tag-chrome-platform-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform
Pull chrome platform updates from Benson Leung:
- Changes for EC_MKBP_EVENT_SENSOR_FIFO handling.
- Also, maintainership changes. Olofj out, Enric balletbo in.
* tag 'tag-chrome-platform-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform:
MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
MAINTAINERS: platform/chrome: Add Enric as a maintainer
MAINTAINERS: platform/chrome: remove myself as maintainer
platform/chrome: don't report EC_MKBP_EVENT_SENSOR_FIFO as wakeup
platform/chrome: straighten out cros_ec_get_{next,host}_event() error codes
projects / linux.git / log