Linus Torvalds [Mon, 28 Mar 2022 21:46:53 +0000 (14:46 -0700)]
Merge tag 'microblaze-v5.18' of git://git.monstr.eu/linux-2.6-microblaze
Pull microblaze updates from Michal Simek:
- Small fixups
- Remove unused pci_phys_mem_access_prot()
* tag 'microblaze-v5.18' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze/PCI: Remove pci_phys_mem_access_prot() dead code
microblaze: add const to of_device_id
microblaze: fix typo in a comment
Johannes Berg [Fri, 25 Mar 2022 21:50:23 +0000 (22:50 +0100)]
net: move net_unlink_todo() out of the header
There's no reason for this to be in netdevice.h, it's all
just used in dev.c. Also make it no longer inline and let
the compiler decide to do that by itself.
Xiaomeng Tong [Mon, 28 Mar 2022 03:24:31 +0000 (11:24 +0800)]
net: dsa: bcm_sf2_cfp: fix an incorrect NULL check on list iterator
The bug is here:
return rule;
The list iterator value 'rule' will *always* be set and non-NULL
by list_for_each_entry(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty or no element
is found.
To fix the bug, return 'rule' when found, otherwise return NULL.
Linus Torvalds [Mon, 28 Mar 2022 21:38:31 +0000 (14:38 -0700)]
Merge tag 'livepatching-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Petr Mladek:
- Forced transitions block only to-be-removed livepatches [Chengming]
- Detect when ftrace handler could not be disabled in self-tests [David]
- Calm down warning from a static analyzer [Tom]
* tag 'livepatching-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
livepatch: Reorder to use before freeing a pointer
livepatch: Don't block removal of patches that are safe to unload
livepatch: Skip livepatch tests if ftrace cannot be configured
The Architecture chapter of the KUnit documentation tried to include
copies of the kernel-doc for a couple of things, despite these already
existing in the API documentation. This lead to some warnings:
architecture:31: ./include/kunit/test.h:3: WARNING: Duplicate C declaration, also defined at dev-tools/kunit/api/test:66.
Declaration is '.. c:struct:: kunit_case'.
architecture:163: ./include/kunit/test.h:1217: WARNING: Duplicate C declaration, also defined at dev-tools/kunit/api/test:1217.
Declaration is '.. c:macro:: KUNIT_ARRAY_PARAM'.
architecture.rst:3: WARNING: Duplicate C declaration, also defined at dev-tools/kunit/api/test:66.
Declaration is '.. c:struct:: kunit_case'.
architecture.rst:1217: WARNING: Duplicate C declaration, also defined at dev-tools/kunit/api/test:1217.
Declaration is '.. c:macro:: KUNIT_ARRAY_PARAM'.
Get rid of these, and cleanup the mentions of the struct and macro in
question so that sphinx generates a link to the existing copy of the
documentation in the api/test document.
Linus Torvalds [Mon, 28 Mar 2022 21:32:39 +0000 (14:32 -0700)]
Merge tag 'for-linus-5.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- A bunch of minor cleanups
- A fix for kexec in Xen dom0 when executed on a high cpu number
- A fix for resuming after suspend of a Xen guest with assigned PCI
devices
- A fix for a crash due to not disabled preemption when resuming as Xen
dom0
* tag 'for-linus-5.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: fix is_xen_pmu()
xen: don't hang when resuming PCI device
arch:x86:xen: Remove unnecessary assignment in xen_apic_read()
xen/grant-table: remove readonly parameter from functions
xen/grant-table: remove gnttab_*transfer*() functions
drivers/xen: use helper macro __ATTR_RW
x86/xen: Fix kerneldoc warning
xen: delay xen_hvm_init_time_ops() if kdump is boot on vcpu>=32
xen: use time_is_before_eq_jiffies() instead of open coding it
Eli Cohen [Mon, 21 Mar 2022 14:13:03 +0000 (16:13 +0200)]
vdpa/mlx5: Avoid processing works if workqueue was destroyed
If mlx5_vdpa gets unloaded while a VM is running, the workqueue will be
destroyed. However, vhost might still have reference to the kick
function and might attempt to push new works. This could lead to null
pointer dereference.
To fix this, set mvdev->wq to NULL just before destroying and verify
that the workqueue is not NULL in mlx5_vdpa_kick_vq before attempting to
push a new work.
vhost: handle error while adding split ranges to iotlb
vhost_iotlb_add_range_ctx() handles the range [0, ULONG_MAX] by
splitting it into two ranges and adding them separately. The return
value of adding the first range to the iotlb is currently ignored.
Check the return value and bail out in case of an error.
Michael Qiu [Mon, 28 Mar 2022 05:48:12 +0000 (01:48 -0400)]
vdpa/mlx5: re-create forwarding rules after mac modified
When MAC Address has been modified in guest, we only re-add the
Mac to mpfs, it is not enough, because the guest network will
not work correctly: the reply package from outside will go
straight away to the host VF net interface.
This patch recreate the flow rules, and make it work correctly.
Keir Fraser [Wed, 23 Mar 2022 14:07:27 +0000 (14:07 +0000)]
virtio: pci: check bar values read from virtio config space
virtio pci config structures may in future have non-standard bar
values in the bar field. We should anticipate this by skipping any
structures containing such a reserved value.
The bar value should never change: check for harmful modified values
we re-read it from the config space in vp_modern_map_capability().
Also clean up an existing check to consistently use PCI_STD_NUM_BARS.
Jason Wang [Wed, 23 Mar 2022 03:15:24 +0000 (11:15 +0800)]
Revert "virtio_pci: harden MSI-X interrupts"
This reverts commit 9e35276a5344f74d4a3600fc4100b3dd251d5c56. Issue
were reported for the drivers that are using affinity managed IRQ
where manually toggling IRQ status is not expected. And we forget to
enable the interrupts in the restore path as well.
In the future, we will rework on the interrupt hardening.
Jason Wang [Wed, 23 Mar 2022 03:15:23 +0000 (11:15 +0800)]
Revert "virtio-pci: harden INTX interrupts"
This reverts commit 080cd7c3ac8701081d143a15ba17dd9475313188. Since
the MSI-X interrupts hardening will be reverted in the next patch. We
will rework the interrupt hardening in the future.
Now it's possible to control supported hashflows.
Added hashflow set/get callbacks.
Also, disabling RXH_IP_SRC/DST for TCP would disable then for UDP.
TCP and UDP supports only:
ethtool -U eth0 rx-flow-hash tcp4 sd
RXH_IP_SRC + RXH_IP_DST
ethtool -U eth0 rx-flow-hash tcp4 sdfn
RXH_IP_SRC + RXH_IP_DST + RXH_L4_B_0_1 + RXH_L4_B_2_3
Disabling happens because VirtioNET hashtype for IP doesn't check L4 proto,
it works for all IP packets(TCP, UDP, ICMP, etc.).
For TCP and UDP, it's possible to set IP+PORT hashes.
But disabling IP hashes will disable them for TCP and UDP simultaneously.
It's possible to set IP+PORT for TCP/UDP and disable/enable IP
for everything else(UDP, ICMP, etc.).
Added features for RSS.
Added initialization, RXHASH feature and ethtool ops.
By default RSS/RXHASH is disabled.
Virtio RSS "IPv6 extensions" hashes disabled.
Added ethtools ops to set key and indirection table.
drivers/net/virtio_net: Fixed padded vheader to use v1 with hash.
The header v1 provides additional info about RSS.
Added changes to computing proper header length.
In the next patches, the header may contain RSS hash info
for the hash population.
virtio: use virtio_device_ready() in virtio_device_restore()
After waking up a suspended VM, the kernel prints the following trace
for virtio drivers which do not directly call virtio_device_ready() in
the .restore:
This happens because we don't invoke .enable_cbs callback in
virtio_device_restore(). That callback is used by some transports
(e.g. virtio-pci) to enable interrupts.
Let's fix it, by calling virtio_device_ready() as we do in
virtio_dev_probe(). This function calls .enable_cts callback and sets
DRIVER_OK status bit.
This fix also avoids setting DRIVER_OK twice for those drivers that
call virtio_device_ready() in the .restore.
Xuan Zhuo [Thu, 24 Feb 2022 11:03:55 +0000 (19:03 +0800)]
virtio_ring: remove flags check for unmap split indirect desc
When calling vring_unmap_one_split_indirect(), it will not encounter the
situation that the flags contains VRING_DESC_F_INDIRECT. So remove this
logic.
Eli Cohen [Mon, 21 Feb 2022 12:19:27 +0000 (14:19 +0200)]
net/mlx5: Add support for configuring max device MTU
Allow an admin creating a vdpa device to specify the max MTU for the
net device.
For example, to create a device with max MTU of 1000, the following
command can be used:
$ vdpa dev add name vdpa-a mgmtdev auxiliary/mlx5_core.sf.1 mtu 1000
This configuration mechanism assumes that vdpa is the sole real user of
the function. mlx5_core could theoretically change the mtu of the
function using the ip command on the mlx5_core net device but this
should not be done.
zhenwei pi [Wed, 2 Mar 2022 03:39:17 +0000 (11:39 +0800)]
virtio-crypto: rename skcipher algs
Suggested by Gonglei, rename virtio_crypto_algs.c to
virtio_crypto_skcipher_algs.c. Also minor changes for function name.
Thus the function of source files get clear: skcipher services in
virtio_crypto_skcipher_algs.c and akcipher services in
virtio_crypto_akcipher_algs.c.
zhenwei pi [Wed, 2 Mar 2022 03:39:16 +0000 (11:39 +0800)]
virtio-crypto: implement RSA algorithm
Support rsa & pkcs1pad(rsa,sha1) with priority 150.
Test with QEMU built-in backend, it works fine.
1, The self-test framework of crypto layer works fine in guest kernel
2, Test with Linux guest(with asym support), the following script
test(note that pkey_XXX is supported only in a newer version of keyutils):
- both public key & private key
- create/close session
- encrypt/decrypt/sign/verify basic driver operation
- also test with kernel crypto layer(pkey add/query)
Gautam Dawar [Tue, 15 Feb 2022 05:34:29 +0000 (11:04 +0530)]
Add definition of VIRTIO_F_IN_ORDER feature bit
This patch adds the definition of VIRTIO_F_IN_ORDER feature bit
in the relevant header file to make it available in QEMU's
linux standard header file virtio_config.h, which is updated using
scripts/update-linux-headers.sh
Miaohe Lin [Tue, 25 Jan 2022 13:22:21 +0000 (21:22 +0800)]
mm/balloon_compaction: make balloon page compaction callbacks static
Since commit b1123ea6d3b3 ("mm: balloon: use general non-lru movable page
feature"), these functions are called via balloon_aops callbacks. They're
not called directly outside this file. So make them static and clean up
the relevant code.
Zhu Lingshan [Tue, 22 Feb 2022 11:54:27 +0000 (19:54 +0800)]
vDPA/ifcvf: implement shared IRQ feature
On some platforms/devices, there may not be enough MSI vectors
allocated for the virtqueues and config changes. In such a case,
the interrupt sources(virtqueues, config changes) must share
an IRQ/vector, to avoid initialization failures, keep
the device functional.
This commit handles three cases:
(1) number of the allocated vectors == the number of virtqueues + 1
(config changes), every virtqueue and the config interrupt has
a separated vector/IRQ, the best and the most likely case.
(2) number of the allocated vectors is less than the best case, but
greater than 1. In this case, all virtqueues share a vector/IRQ,
the config interrupt has a separated vector/IRQ
(3) only one vector is allocated, in this case, the virtqueues and
the config interrupt share a vector/IRQ. The worst and most
unlikely case.
Otherwise, it needs to fail.
This commit introduces some helper functions:
ifcvf_set_vq_vector() and ifcvf_set_config_vector() sets virtqueue
vector and config vector in the device config space, so that
the device can send interrupt DMA.
Zhu Lingshan [Tue, 22 Feb 2022 11:54:25 +0000 (19:54 +0800)]
vhost_vdpa: don't setup irq offloading when irq_num < 0
When irq number is negative(e.g., -EINVAL), the virtqueue
may be disabled or the virtqueues are sharing a device irq.
In such case, we should not setup irq offloading for a virtqueue.
In vhost_enable_notify() we enable the notifications and we read
the avail index to check if new buffers have become available in
the meantime.
We are not caching the avail index, so when the device will call
vhost_get_vq_desc(), it will find the old value in the cache and
it will read the avail index again.
It would be better to refresh the cache every time we read avail
index, so let's change vhost_enable_notify() caching the value in
`avail_idx` and compare it with `last_avail_idx` to check if there
are new buffers available.
We don't expect a significant performance boost because
the above path is not very common, indeed vhost_enable_notify()
is often called with unlikely(), expecting that avail index has
not been updated.
We ran virtio-test/vhost-test and noticed minimal improvement as
expected. To stress the patch more, we modified vhost_test.ko to
call vhost_enable_notify()/vhost_disable_notify() on every cycle
when calling vhost_get_vq_desc(); in this case we observed a more
evident improvement, with a reduction of the test execution time
of about 3.7%.
Damien Le Moal [Mon, 28 Mar 2022 06:27:08 +0000 (15:27 +0900)]
net: bnxt_ptp: fix compilation error
The Broadcom bnxt_ptp driver does not compile with GCC 11.2.2 when
CONFIG_WERROR is enabled. The following error is generated:
drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c: In function ‘bnxt_ptp_enable’:
drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:400:43: error: array
subscript 255 is above array bounds of ‘struct pps_pin[4]’
[-Werror=array-bounds]
400 | ptp->pps_info.pins[pin_id].event = BNXT_PPS_EVENT_EXTERNAL;
| ~~~~~~~~~~~~~~~~~~^~~~~~~~
In file included from drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:20:
drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h:75:24: note: while
referencing ‘pins’
75 | struct pps_pin pins[BNXT_MAX_TSIO_PINS];
| ^~~~
cc1: all warnings being treated as errors
This is due to the function ptp_find_pin() returning a pin ID of -1 when
a valid pin is not found and this error never being checked.
Change the TSIO_PIN_VALID() function to also check that a pin ID is not
negative and use this macro in bnxt_ptp_enable() to check the result of
the calls to ptp_find_pin() to return an error early for invalid pins.
This fixes the compilation error.
Linus Torvalds [Mon, 28 Mar 2022 20:00:51 +0000 (13:00 -0700)]
Merge tag 'tty-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here are the big set of tty and serial driver changes for 5.18-rc1.
Nothing major, some more good cleanups from Jiri and 2 new serial
drivers. Highlights include:
- termbits cleanups
- export symbol cleanups and other core cleanups from Jiri Slaby
- new sunplus and mvebu uart drivers (amazing that people are still
creating new uarts...)
- samsung serial driver cleanups
- ldisc 29 is now "reserved" for experimental/development line
disciplines
- lots of other tiny fixes and cleanups to serial drivers and
bindings
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (104 commits)
vt_ioctl: fix potential spectre v1 in VT_DISALLOCATE
serial: 8250: fix XOFF/XON sending when DMA is used
tty: serial: samsung: Add ARTPEC-8 support
dt-bindings: serial: samsung: Add ARTPEC-8 UART
serial: sc16is7xx: Clear RS485 bits in the shutdown
tty: serial: samsung: simplify getting OF match data
tty: serial: samsung: constify variables and pointers
tty: serial: samsung: constify s3c24xx_serial_drv_data members
tty: serial: samsung: constify UART name
tty: serial: samsung: constify s3c24xx_serial_drv_data
tty: serial: samsung: reduce number of casts
tty: serial: samsung: embed s3c2410_uartcfg in parent structure
tty: serial: samsung: embed s3c24xx_uart_info in parent structure
serial: 8250_tegra: mark acpi_device_id as unused with !ACPI
tty: serial: bcm63xx: use more precise Kconfig symbol
serial: SERIAL_SUNPLUS should depend on ARCH_SUNPLUS
tty: serial: jsm: fix two assignments in if conditions
tty: serial: jsm: remove redundant assignments to variable linestatus
serial: 8250_mtk: make two read-only arrays static const
serial: samsung_tty: do not unlock port->lock for uart_write_wakeup()
...
The files included by kernel-include should be added as build
dependencies, in order for sphinx-build to rebuild the corresponding
docs if any changes at the included file happens.
Ensure that Sphinx-build will handle the files parsed by
get_abi.pl as dependencies. This way, if they are touched,
the ABI output will be regenerated.
scripts/get_feat.pl: allow output the parsed file names
Such output could be helpful while debugging it, but its main
goal is to tell kernel_feat.py about what files were used
by the script. Thie way, kernel_feat.py can add those as
documentation dependencies.
Akira Yokosawa [Sat, 26 Mar 2022 07:48:39 +0000 (16:48 +0900)]
docs: kfigure.py: Don't warn of missing PDF converter in 'make htmldocs'
SVG -> PDF conversion is not required in "make htmldocs".
It is pointless to always warn of a missing converter.
Demote the log message in setupTools() to verbose.
For "make pdfdocs" (or "make latexdocs"), promote the dynamic
message of "include SVG raw" to a warn.
Expand the message and recommend installing Inkscape or
ImageMagick.
Linus Torvalds [Mon, 28 Mar 2022 19:50:50 +0000 (12:50 -0700)]
Merge tag 'staging-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver updates for 5.18-rc1.
Loads of tiny cleanups for almost all staging drivers in here, nothing
major at all. Highlights include:
- remove the ashmem Android driver. It is long-dead and if there are
any legacy userspace applications still using it, the Android
kernel images will maintain it, the community shouldn't care about
it anymore
- wfx wifi driver major cleanups. Should be ready to merge out of
staging soon, and will coordinate with the wifi maintainers after
-rc1 is out
- major cleanups and unwinding of the layers of the r8188eu driver.
It's amazing just how many unneeded layers of abstraction is in
there, just when we think it's done, another is found...
- lots of tiny coding style cleanups in many other staging drivers.
All have been in linux-next for a while with no reported problems"
* tag 'staging-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (455 commits)
staging: r8188eu: remove unnecessary memset in r8188eu
staging: greybus: introduce pwm_ops::apply
staging: rts5208: Resolve checkpatch.pl issues.
staging: sm750fb: fix naming style
staging: fbtft: Consider type of init sequence values in fbtft_init_display()
staging: fbtft: Constify buf parameter in fbtft_dbg_hex()
staging: mmal-vchiq: clear redundant item named bulk_scratch
mips: dts: ralink: add MT7621 SoC
staging: r8188eu: remove some unused local ieee80211 macros
staging: r8188eu: make rtl8188e_process_phy_info static
staging: r8188eu: remove unused function prototype
staging: r8188eu: remove three unused receive defines
staging: r8188eu: remove unnecessary initializations
staging: rtl8192e: Fix spelling mistake "RESQUEST" -> "REQUEST"
MAINTAINERS: remove the obsolete file entry for staging in ANDROID DRIVERS
staging: r8188eu: proper error handling in rtw_init_drv_sw
staging: r8188eu: call _cancel_timer_ex from _rtw_free_recv_priv
staging: vt6656: Removed unused variable vt3342_vnt_threshold
staging: vt6656: Removed unused variable bb_vga_0
staging: remove ashmem
...
Linus Torvalds [Mon, 28 Mar 2022 19:41:28 +0000 (12:41 -0700)]
Merge tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.18-rc1.
Not much here, primarily it was a bunch of cleanups and small updates:
- kobj_type cleanups for default_groups
- documentation updates
- firmware loader minor changes
- component common helper added and take advantage of it in many
drivers (the largest part of this pull request).
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (54 commits)
Documentation: update stable review cycle documentation
drivers/base/dd.c : Remove the initial value of the global variable
Documentation: update stable tree link
Documentation: add link to stable release candidate tree
devres: fix typos in comments
Documentation: add note block surrounding security patch note
samples/kobject: Use sysfs_emit instead of sprintf
base: soc: Make soc_device_match() simpler and easier to read
driver core: dd: fix return value of __setup handler
driver core: Refactor sysfs and drv/bus remove hooks
driver core: Refactor multiple copies of device cleanup
scripts: get_abi.pl: Fix typo in help message
kernfs: fix typos in comments
kernfs: remove unneeded #if 0 guard
ALSA: hda/realtek: Make use of the helper component_compare_dev_name
video: omapfb: dss: Make use of the helper component_compare_dev
power: supply: ab8500: Make use of the helper component_compare_dev
ASoC: codecs: wcd938x: Make use of the helper component_compare/release_of
iommu/mediatek: Make use of the helper component_compare/release_of
drm: of: Make use of the helper component_release_of
...
Linus Torvalds [Mon, 28 Mar 2022 19:27:35 +0000 (12:27 -0700)]
Merge tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
updates for 5.18-rc1.
Included in here are merges from driver subsystems which contain:
- iio driver updates and new drivers
- fsi driver updates
- fpga driver updates
- habanalabs driver updates and support for new hardware
- soundwire driver updates and new drivers
- phy driver updates and new drivers
- coresight driver updates
- icc driver updates
Individual changes include:
- mei driver updates
- interconnect driver updates
- new PECI driver subsystem added
- vmci driver updates
- lots of tiny misc/char driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits)
firmware: google: Properly state IOMEM dependency
kgdbts: fix return value of __setup handler
firmware: sysfb: fix platform-device leak in error path
firmware: stratix10-svc: add missing callback parameter on RSU
arm64: dts: qcom: add non-secure domain property to fastrpc nodes
misc: fastrpc: Add dma handle implementation
misc: fastrpc: Add fdlist implementation
misc: fastrpc: Add helper function to get list and page
misc: fastrpc: Add support to secure memory map
dt-bindings: misc: add fastrpc domain vmid property
misc: fastrpc: check before loading process to the DSP
misc: fastrpc: add secure domain support
dt-bindings: misc: add property to support non-secure DSP
misc: fastrpc: Add support to get DSP capabilities
misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP
misc: fastrpc: separate fastrpc device from channel context
dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells
dt-bindings: nvmem: make "reg" property optional
nvmem: brcm_nvram: parse NVRAM content into NVMEM cells
nvmem: dt-bindings: Fix the error of dt-bindings check
...
Linus Torvalds [Mon, 28 Mar 2022 18:52:53 +0000 (11:52 -0700)]
Merge tag 'pinctrl-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"No core changes this time. Just new driver code and improvements!
New drivers:
- New driver for the Broadcom BCM4908 SoC.
- New subdriver for Tesla FSD (Full Self Driving) SoC, a derivative
of the Samsung Exynos pin control driver.
- New driver for the Amlogic Meson S4 SoC.
- New driver for the Sunplus SP7021 SoC.
- New driver for the Microsemi Ocelot family ServalT SoC.
- New subdriver for Intel Alder Lake-M SoC.
- New subdriver for Intel Ice Lake-N SoC, including PCH support.
- New subdriver for Renesas R8A779F0 SoC.
- New subdriver for Mediatek MT8186 SoC.
- New subdriver for NXP Freescale i.MX93 SoC.
- New driver for Nuvoton WPCM450 SoC.
- New driver for Qualcomm SC8280XP SoC.
Improvements:
- Wakeup support on Samsung Exynos850 and ExynosAutov9.
- Serious and voluminous maintenance cleanup and refactoring in the
Renesas drivers. Mainly sharing similar data between the different
SoC subdrivers.
- Qualcomm SM8450 EGPIO support.
- Drive strength support on the Mediatek MT8195.
- Add some missing groups and functions to the Ralink RT2880"
* tag 'pinctrl-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (188 commits)
pinctrl: mediatek: common-v1: fix semicolon.cocci warnings
pinctrl: nuvoton: wpcm450: Fix build error without OF
pinctrl: qcom-pmic-gpio: Add support for pm8450
dt-bindings: pinctrl: aspeed: Update gfx node in example
dt-bindings: pinctrl: rt2880: add missing pin groups and functions
pinctrl: ingenic: Fix regmap on X series SoCs
pinctrl: nuvoton: Fix return value check in wpcm450_gpio_register()
pinctrl: nuvoton: wpcm450: off by one in wpcm450_gpio_register()
pinctrl: nuvoton: wpcm450: select GENERIC_PINCTRL_GROUPS
pinctrl: nuvoton: Fix sparse warning
pinctrl: mediatek: mt8186: Account for probe refactoring
pinctrl: mediatek: common-v1: Commonize spec_ies_smt_set callback
pinctrl: mediatek: common-v1: Commonize spec_pupd callback
pinctrl: mediatek: common-v1: Use common probe function
pinctrl: mediatek: common-v1: Add common probe function
pinctrl: mediatek: paris: Unify probe function by using OF match data
pinctrl/rockchip: Add missing of_node_put() in rockchip_pinctrl_probe
pinctrl: nomadik: Add missing of_node_put() in nmk_pinctrl_probe
pinctrl: berlin: fix error return code of berlin_pinctrl_build_state()
pinctrl: qcom: Introduce sc8280xp TLMM driver
...
Linus Torvalds [Mon, 28 Mar 2022 18:37:05 +0000 (11:37 -0700)]
Reinstate some of "swiotlb: rework "fix info leak with DMA_FROM_DEVICE""
Halil Pasic points out [1] that the full revert of that commit (revert
in bddac7c1e02b), and that a partial revert that only reverts the
problematic case, but still keeps some of the cleanups is probably
better. 
And that partial revert [2] had already been verified by Oleksandr
Natalenko to also fix the issue, I had just missed that in the long
discussion.
So let's reinstate the cleanups from commit aa6f8dcbab47 ("swiotlb:
rework "fix info leak with DMA_FROM_DEVICE""), and effectively only
revert the part that caused problems.
Darrick J. Wong [Wed, 16 Mar 2022 20:38:43 +0000 (13:38 -0700)]
xfs: don't report reserved bnobt space as available
On a modern filesystem, we don't allow userspace to allocate blocks for
data storage from the per-AG space reservations, the user-controlled
reservation pool that prevents ENOSPC in the middle of internal
operations, or the internal per-AG set-aside that prevents unwanted
filesystem shutdowns due to ENOSPC during a bmap btree split.
Since we now consider freespace btree blocks as unavailable for
allocation for data storage, we shouldn't report those blocks via statfs
either. This makes the numbers that we return via the statfs f_bavail
and f_bfree fields a more conservative estimate of actual free space.
Darrick J. Wong [Thu, 24 Mar 2022 17:57:07 +0000 (10:57 -0700)]
xfs: fix overfilling of reserve pool
Due to cycling of m_sb_lock, it's possible for multiple callers of
xfs_reserve_blocks to race at changing the pool size, subtracting blocks
from fdblocks, and actually putting it in the pool. The result of all
this is that we can overfill the reserve pool to hilarious levels.
xfs_mod_fdblocks, when called with a positive value, already knows how
to take freed blocks and either fill the reserve until it's full, or put
them in fdblocks. Use that instead of setting m_resblks_avail directly.
Darrick J. Wong [Thu, 24 Mar 2022 19:43:32 +0000 (12:43 -0700)]
xfs: always succeed at setting the reserve pool size
Nowadays, xfs_mod_fdblocks will always choose to fill the reserve pool
with freed blocks before adding to fdblocks. Therefore, we can change
the behavior of xfs_reserve_blocks slightly -- setting the target size
of the pool should always succeed, since a deficiency will eventually
be made up as blocks get freed.
Darrick J. Wong [Fri, 11 Mar 2022 18:56:01 +0000 (10:56 -0800)]
xfs: remove infinite loop when reserving free block pool
Infinite loops in kernel code are scary. Calls to xfs_reserve_blocks
should be rare (people should just use the defaults!) so we really don't
need to try so hard. Simplify the logic here by removing the infinite
loop.
Darrick J. Wong [Wed, 16 Mar 2022 18:54:18 +0000 (11:54 -0700)]
xfs: don't include bnobt blocks when reserving free block pool
xfs_reserve_blocks controls the size of the user-visible free space
reserve pool. Given the difference between the current and requested
pool sizes, it will try to reserve free space from fdblocks. However,
the amount requested from fdblocks is also constrained by the amount of
space that we think xfs_mod_fdblocks will give us. If we forget to
subtract m_allocbt_blks before calling xfs_mod_fdblocks, it will will
return ENOSPC and we'll hang the kernel at mount due to the infinite
loop.
In commit fd43cf600cf6, we decided that xfs_mod_fdblocks should not hand
out the "free space" used by the free space btrees, because some portion
of the free space btrees hold in reserve space for future btree
expansion. Unfortunately, xfs_reserve_blocks' estimation of the number
of blocks that it could request from xfs_mod_fdblocks was not updated to
include m_allocbt_blks, so if space is extremely low, the caller hangs.
Fix this by creating a function to estimate the number of blocks that
can be reserved from fdblocks, which needs to exclude the set-aside and
m_allocbt_blks.
Found by running xfs/306 (which formats a single-AG 20MB filesystem)
with an fstests configuration that specifies a 1k blocksize and a
specially crafted log size that will consume 7/8 of the space (17920
blocks, specifically) in that AG.
Trond Myklebust [Mon, 28 Mar 2022 12:36:34 +0000 (08:36 -0400)]
NFSv4/pNFS: Fix another issue with a list iterator pointing to the head
In nfs4_callback_devicenotify(), if we don't find a matching entry for
the deviceid, we're left with a pointer to 'struct nfs_server' that
actually points to the list of super blocks associated with our struct
nfs_client.
Furthermore, even if we have a valid pointer, nothing pins the super
block, and so the struct nfs_server could end up getting freed while
we're using it.
Since all we want is a pointer to the struct pnfs_layoutdriver_type,
let's skip all the iteration over super blocks, and just use APIs to
find the layout driver directly.
block: Fix the maximum minor value is blk_alloc_ext_minor()
ida_alloc_range(..., min, max, ...) returns values from min to max,
inclusive.
So, NR_EXT_DEVT is a valid idx returned by blk_alloc_ext_minor().
This is an issue because in device_add_disk(), this value is used in:
ddev->devt = MKDEV(disk->major, disk->first_minor);
and NR_EXT_DEVT is '(1 << MINORBITS)'.
So, should 'disk->first_minor' be NR_EXT_DEVT, it would overflow.
Jiri Slaby [Mon, 28 Mar 2022 08:59:28 +0000 (10:59 +0200)]
block: restore the old set_task_ioprio() behaviour wrt PF_EXITING
PF_EXITING tasks were silently ignored before the below commits.
Continue doing so. Otherwise python-psutil tests fail:
ERROR: psutil.tests.test_process.TestProcess.test_zombie_process
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/abuild/rpmbuild/BUILD/psutil-5.9.0/build/lib.linux-x86_64-3.9/psutil/_pslinux.py", line 1661, in wrapper
return fun(self, *args, **kwargs)
File "/home/abuild/rpmbuild/BUILD/psutil-5.9.0/build/lib.linux-x86_64-3.9/psutil/_pslinux.py", line 2133, in ionice_set
return cext.proc_ioprio_set(self.pid, ioclass, value)
ProcessLookupError: [Errno 3] No such process
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/home/abuild/rpmbuild/BUILD/psutil-5.9.0/psutil/tests/test_process.py", line 1313, in test_zombie_process
succeed_or_zombie_p_exc(fun)
File "/home/abuild/rpmbuild/BUILD/psutil-5.9.0/psutil/tests/test_process.py", line 1288, in succeed_or_zombie_p_exc
return fun()
File "/home/abuild/rpmbuild/BUILD/psutil-5.9.0/build/lib.linux-x86_64-3.9/psutil/__init__.py", line 792, in ionice
return self._proc.ionice_set(ioclass, value)
File "/home/abuild/rpmbuild/BUILD/psutil-5.9.0/build/lib.linux-x86_64-3.9/psutil/_pslinux.py", line 1665, in wrapper
raise NoSuchProcess(self.pid, self._name)
psutil.NoSuchProcess: process no longer exists (pid=2057)
Vasily Averin [Thu, 24 Mar 2022 18:05:50 +0000 (21:05 +0300)]
memcg: enable accounting for nft objects
nftables replaces iptables, but it lacks memcg accounting.
This patch account most of the memory allocation associated with nft
and should protect the host from misusing nft inside a memcg restricted
container.
Muchun Song [Sun, 27 Mar 2022 05:18:52 +0000 (13:18 +0800)]
mm: kfence: fix missing objcg housekeeping for SLAB
The objcg is not cleared and put for kfence object when it is freed,
which could lead to memory leak for struct obj_cgroup and wrong
statistics of NR_SLAB_RECLAIMABLE_B or NR_SLAB_UNRECLAIMABLE_B.
Since the last freed object's objcg is not cleared,
mem_cgroup_from_obj() could return the wrong memcg when this kfence
object, which is not charged to any objcgs, is reallocated to other
users.
Linus Torvalds [Sun, 27 Mar 2022 21:26:47 +0000 (14:26 -0700)]
Merge tag 'landlock-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
"These two commits contain a minor fix for the sandboxer sample, and a
Landlock ruleset FD name standardization"
* tag 'landlock-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Use square brackets around "landlock-ruleset"
samples/landlock: Fix path_list memory leak
Linus Torvalds [Sun, 27 Mar 2022 21:21:57 +0000 (14:21 -0700)]
Merge tag 'mailbox-v5.18' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
"qcom:
- add support for MSM8976
mtk:
- enable mt8186
- add ADSP controller driver
ti:
- use poll mode during suspend
tegra:
- fix tx channel flush
imx:
- add i.MX8 SECO MU support
- prepare for, and add iMX93 support"
* tag 'mailbox-v5.18' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
dt-bindings: mailbox: add definition for mt8186
mailbox: ti-msgmgr: Operate mailbox in polled mode during system suspend
mailbox: ti-msgmgr: Refactor message read during interrupt handler
mailbox: imx: support i.MX93 S401 MU
mailbox: imx: support dual interrupts
mailbox: imx: extend irq to an array
dt-bindings: mailbox: imx-mu: add i.MX93 S4 MU support
dt-bindings: mailbox: imx-mu: add i.MX93 MU
mailbox: imx: add i.MX8 SECO MU support
mailbox: imx: introduce rxdb callback
dt-bindings: mailbox: imx-mu: add i.MX8 SECO MU support
mailbox: imx: enlarge timeout while reading/writing messages to SCFW
mailbox: imx: fix crash in resume on i.mx8ulp
mailbox: imx: fix wakeup failure from freeze mode
mailbox: mediatek: add support for adsp mailbox controller
dt-bindings: mailbox: mtk,adsp-mbox: add mtk adsp-mbox document
mailbox: qcom-apcs-ipc: Add compatible for MSM8976 SoC
dt-bindings: mailbox: Add compatible for the MSM8976
mailbox: tegra-hsp: Flush whole channel
Linus Torvalds [Sun, 27 Mar 2022 21:09:48 +0000 (14:09 -0700)]
Merge tag 'leds-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds
Pull LED updates from Pavel Machek:
"Nothing major here, there are two drivers that need review and did not
make it into this round"
* tag 'leds-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
leds: pca955x: Allow zero LEDs to be specified
leds: pca955x: Make the gpiochip always expose all pins
leds: simatic-ipc-leds: Don't directly deref ioremap_resource() returned ptr
leds: simatic-ipc-leds: Make simatic_ipc_led_mem_res static
leds: lm3692x: Return 0 from remove callback
leds: sgm3140: Add ocs,ocp8110 compatible
dt-bindings: vendor-prefixes: Add ocs prefix
dt-bindings: leds: common: fix unit address in max77693 example
Explanation about these features from the "Intel® 64 and IA-32
architectures software developer’s manual combined volumes: 1, 2A,
2B, 2C, 2D, 3A, 3B, 3C, 3D, and 4" PDF at:
https://cdrdv2.intel.com/v1/dl/getContent/671200
At page 3951:
"32.2.4
Event Trace is a capability that exposes details about the
asynchronous events, when they are generated, and when their
corresponding software event handler completes execution. These
include:
o Interrupts, including NMI and SMI, including the interrupt
vector when defined.
o Faults, exceptions including the fault vector.
- Page faults additionally include the page fault address,
when in context.
o Event handler returns, including IRET and RSM.
o VM exits and VM entries.¹
- VM exits include the values written to the “exit reason”
and “exit qualification” VMCS fields. INIT and SIPI events.
o TSX aborts, including the abort status returned for the RTM
instructions.
o Shutdown.
Additionally, it provides indication of the status of the
Interrupt Flag (IF), to indicate when interrupts are masked"
ARM CoreSight:
- Use advertised caps/min_interval as default sample_period on ARM
spe.
- Update deduction of TRCCONFIGR register for branch broadcast on
ARM's CoreSight ETM.
Linus Torvalds [Sun, 27 Mar 2022 20:36:06 +0000 (13:36 -0700)]
Merge tag 'memblock-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
"Test suite and a small cleanup:
- A small cleanup of unused variable in __next_mem_pfn_range_in_zone
- Initial test suite to simulate memblock behaviour in userspace"
* tag 'memblock-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: (27 commits)
memblock tests: Add TODO and README files
memblock tests: Add memblock_alloc_try_nid tests for bottom up
memblock tests: Add memblock_alloc_try_nid tests for top down
memblock tests: Add memblock_alloc_from tests for bottom up
memblock tests: Add memblock_alloc_from tests for top down
memblock tests: Add memblock_alloc tests for bottom up
memblock tests: Add memblock_alloc tests for top down
memblock tests: Add simulation of physical memory
memblock tests: Split up reset_memblock function
memblock tests: Fix testing with 32-bit physical addresses
memblock: __next_mem_pfn_range_in_zone: remove unneeded local variable nid
memblock tests: Add memblock_free tests
memblock tests: Add memblock_add_node test
memblock tests: Add memblock_remove tests
memblock tests: Add memblock_reserve tests
memblock tests: Add memblock_add tests
memblock tests: Add memblock reset function
memblock tests: Add skeleton of the memblock simulator
tools/include: Add debugfs.h stub
tools/include: Add pfn.h stub
...
s390/pci: rename get_zdev_by_bus() to zdev_from_bus()
Getting a zpci_dev via get_zdev_by_bus() uses the long lived reference
held in zbus->function[devfn]. This is accounted for in
pcibios_add_device() and pcibios_release_device().
Therefore there is no need to increment the reference count in
get_zdev_by_bus() as is done for get_zdev_by_fid(). Instead callers must
not access the device after pcibios_release_device() was called which is
necessary for common PCI code anyway. With this though the very similar
naming may be misleading so rename get_zdev_by_bus() to zdev_from_bus()
emphasizing that we are directly referencing the zdev via the bus.
Currently zpci_dev uses kref based reference counting but only accounts
for one original reference plus one reference from an added pci_dev to
its underlying zpci_dev. Counting just the original reference worked
until the pci_dev reference was added in commit 2a671f77ee49 ("s390/pci:
fix use after free of zpci_dev") because once a zpci_dev goes away, i.e.
enters the reserved state, it would immediately get released. However
with the pci_dev reference this is no longer the case and the zpci_dev
may still appear in multiple availability events indicating that it was
reserved. This was solved by detecting when the zpci_dev is already on
its way out but still hanging around. This has however shown some light
on how unusual our zpci_dev reference counting is.
Improve upon this by modelling zpci_dev reference counting on pci_dev.
Analogous to pci_get_slot() increment the reference count in
get_zdev_by_fid(). Thus all users of get_zdev_by_fid() must drop the
reference once they are done with the zpci_dev.
Similar to pci_scan_single_device(), zpci_create_device() returns the
device with an initial count of 1 and the device added to the zpci_list
(analogous to the PCI bus' device_list). In turn users of
zpci_create_device() must only drop the reference once the device is
gone from the point of view of the zPCI subsystem, it might still be
referenced by the common PCI subsystem though.
Jakob Koschel [Sat, 19 Mar 2022 20:35:28 +0000 (21:35 +0100)]
s390/zcrypt: fix using the correct variable for sizeof()
While the original code is valid, it is not the obvious choice for the
sizeof() call and in preparation to limit the scope of the list iterator
variable the sizeof should be changed to the size of the variable
being allocated.
Tony Krowiak [Fri, 18 Mar 2022 20:17:35 +0000 (16:17 -0400)]
s390/vfio-ap: fix kernel doc and signature of group notifier functions
The vfio_ap device driver registers a group notifier function to handle
the VFIO_GROUP_NOTIFY_SET_KVM event signalling the KVM pointer has been
set or cleared. There are two helper functions invoked by the handler
function: One called when the KVM pointer has been set, and the other
when the pointer is cleared.
The kernel doc for both of these functions contains a comment introduced
by commit 0cc00c8d4050 (s390/vfio-ap: fix circular lockdep when
setting/clearing crypto masks) that is no longer valid. This patch removes
this comment from the kernel doc of each helper function.
Commit 86956e70761b (s390/vfio-ap: replace open coded locks for
VFIO_GROUP_NOTIFY_SET_KVM notification) added a parameter to the signature
of the helper function that handles the event indicating the KVM pointer
has been cleared. The parameter added was the KVM pointer itself.
One of the function's primary purposes is to clear the KVM pointer from the
ap_matrix_mdev instance in which it is stored. Since the callers of this
function derive the KVM pointer passed to the function from the
ap_matrix_mdev object itself, it is completely unnecessary to include this
parameter in the function's signature since it can simply be retrieved from
the ap_matrix_mdev object which is also passed in. This patch removes the
KVM pointer from the function's signature.
Macro mem_assign_absolute() is able to access the whole memory, but
is only used and makes sense when updating the absolute lowcore.
Instead, introduce get_abs_lowcore() and put_abs_lowcore() macros
that limit access to absolute lowcore addresses only.
Macro mem_assign_absolute() is used to initialize a target
CPU lowcore callback parameters. But despite the macro name
it writes to the absolute lowcore only if the target CPU is
offline. In case the CPU is online the macro does implicitly
write to the normal memory.
That behaviour is correct, but extremely subtle. Sacrifice
few program bits in favour of clarity and distinguish between
online vs offline CPUs and normal vs absolute lowcore pointer.
Vasily Gorbik [Sat, 5 Mar 2022 12:16:07 +0000 (13:16 +0100)]
s390/unwind: avoid duplicated unwinding entries for kretprobes
Currently when unwinding starts from pt_regs or encounters pt_regs along
the way unwinder tries to yield 2 unwinding entries:
1. (reliable) ip1: pt_regs->psw.addr, sp1: regs->gprs[15]
2. (non-reliable) ip2: sp1->gprs[8] (r14), sp2: regs->gprs[15]
In case of kretprobes those are identical and serves no other purpose
than causing confusion over duplicated entries and cause kprobes tests
to fail. So, skip a duplicate non-reliable entry in this case.
With that kretprobes and unwinder implementation now comply with
ARCH_CORRECT_STACKTRACE_ON_KRETPROBE.
s390/unwind: recover kretprobe modified return address in stacktrace
Based on commit cd9bc2c92588 ("arm64: Recover kretprobe modified return
address in stacktrace").
"""
Since the kretprobe replaces the function return address with
the __kretprobe_trampoline on the stack, stack unwinder shows it
instead of the correct return address.
This checks whether the next return address is the
__kretprobe_trampoline(), and if so, try to find the correct
return address from the kretprobe instance list.
"""
Heiko Carstens [Wed, 16 Mar 2022 18:13:20 +0000 (19:13 +0100)]
s390/traps: improve panic message for translation-specification exception
There are many different types of translation exceptions but only a
translation-specification exception leads to a kernel panic since it
indicates corrupted page tables, which must never happen.
Improve the panic message so it is a bit more obvious what this is about.
projects / linux.git / log