Daniel Golle [Sun, 19 Mar 2023 12:58:43 +0000 (12:58 +0000)]
net: dsa: mt7530: use external PCS driver
Implement regmap access wrappers, for now only to be used by the
pcs-mtk-lynxi driver.
Make use of this external PCS driver and drop the now reduntant
implementation in mt7530.c.
As a nice side effect the SGMII registers can now also more easily be
inspected for debugging via /sys/kernel/debug/regmap.
Daniel Golle [Sun, 19 Mar 2023 12:57:50 +0000 (12:57 +0000)]
net: pcs: add driver for MediaTek SGMII PCS
The SGMII core found in several MediaTek SoCs is identical to what can
also be found in MediaTek's MT7531 Ethernet switch IC.
As this has not always been clear, both drivers developed different
implementations to deal with the PCS.
Recently Alexander Couzens pointed out this fact which lead to the
development of this shared driver.
Add a dedicated driver, mostly by copying the code now found in the
Ethernet driver. The now redundant code will be removed by a follow-up
commit.
Daniel Golle [Sun, 19 Mar 2023 12:57:35 +0000 (12:57 +0000)]
net: ethernet: mtk_eth_soc: ppe: add support for flow accounting
The PPE units found in MT7622 and newer support packet and byte
accounting of hw-offloaded flows. Add support for reading those counters
as found in MediaTek's SDK[1].
Daniel Golle [Sun, 19 Mar 2023 12:56:52 +0000 (12:56 +0000)]
dt-bindings: arm: mediatek: sgmiisys: Convert to DT schema
Convert mediatek,sgmiiisys bindings to DT schema format.
Add maintainer Matthias Brugger, no maintainers were listed in the
original documentation.
As this node is also referenced by the Ethernet controller and used
as SGMII PCS add this fact to the description.
Move the file to Documentation/devicetree/bindings/net/pcs/ which seems
more appropriate given that the great majority of registers are related
to SGMII PCS functionality and only one register represents clock bits.
Linus Torvalds [Mon, 20 Mar 2023 22:20:33 +0000 (15:20 -0700)]
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux
Pull fsverity fixes from Eric Biggers:
"Fix two significant performance issues with fsverity"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
fsverity: don't drop pagecache at end of FS_IOC_ENABLE_VERITY
fsverity: Remove WQ_UNBOUND from fsverity read workqueue
Linus Torvalds [Mon, 20 Mar 2023 22:12:55 +0000 (15:12 -0700)]
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux
Pull fscrypt fix from Eric Biggers:
"Fix a bug where when a filesystem was being unmounted, the fscrypt
keyring was destroyed before inodes have been released by the Landlock
LSM.
This bug was found by syzbot"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
fscrypt: check for NULL keyring in fscrypt_put_master_key_activeref()
fscrypt: improve fscrypt_destroy_keyring() documentation
fscrypt: destroy keyring after security_sb_delete()
Damien Le Moal [Mon, 20 Mar 2023 13:49:15 +0000 (22:49 +0900)]
zonefs: Fix error message in zonefs_file_dio_append()
Since the expected write location in a sequential file is always at the
end of the file (append write), when an invalid write append location is
detected in zonefs_file_dio_append(), print the invalid written location
instead of the expected write location.
Linus Torvalds [Mon, 20 Mar 2023 17:52:10 +0000 (10:52 -0700)]
Merge tag 'nfs-for-6.3-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
- Fix /proc/PID/io read_bytes accounting
- Fix setting NLM file_lock start and end during decoding testargs
- Fix timing for setting access cache timestamps
* tag 'nfs-for-6.3-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS: Correct timing for assigning access cache timestamp
lockd: set file_lock start and end when decoding nlm4 testargs
NFS: Fix /proc/PID/io read_bytes for buffered reads
Lukas Bulwahn [Mon, 20 Mar 2023 07:32:01 +0000 (08:32 +0100)]
MAINTAINERS: remove file entry in NFC SUBSYSTEM after platform_data movement
Commit 053fdaa841bd ("nfc: mrvl: Move platform_data struct into driver")
moves the nfcmrvl.h header file from include/linux/platform_data to the
driver's directory, but misses to adjust MAINTAINERS.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.
Just remove the file entry in NFC SUBSYSTEM, as the new location of the
code is already covered by another pattern in that section.
Fixes: 053fdaa841bd ("nfc: mrvl: Move platform_data struct into driver") Signed-off-by: Lukas Bulwahn <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
David S. Miller [Mon, 20 Mar 2023 10:24:09 +0000 (10:24 +0000)]
Merge branch 'reuse-smsc-phy-functionality'
Heiner Kallweit says:
====================
net: phy: reuse SMSC PHY driver functionality in the meson-gxl PHY driver
The Amlogic Meson internal PHY's have the same register layout as
certain SMSC PHY's (also for non-c22-standard registers). This seems
to be more than just coincidence. Apparently they also need the same
workaround for EDPD mode (energy detect power down). Therefore let's
reuse SMSC PHY driver functionality in the meson-gxl PHY driver.
====================
Heiner Kallweit [Sat, 18 Mar 2023 20:36:04 +0000 (21:36 +0100)]
net: phy: meson-gxl: reuse functionality of the SMSC PHY driver
The Amlogic Meson internal PHY's have the same register layout as
certain SMSC PHY's (also for non-c22-standard registers). This seems
to be more than just coincidence. Apparently they also need the same
workaround for EDPD mode (energy detect power down). Therefore let's
reuse SMSC PHY driver functionality in the meson-gxl PHY driver.
Tested with a G12A internal PHY. I don't have GXL test hw,
therefore I replace only the callbacks that are identical in
the SMSC PHY driver.
Heiner Kallweit [Sat, 18 Mar 2023 20:32:41 +0000 (21:32 +0100)]
net: phy: smsc: export functions for use by meson-gxl PHY driver
The Amlogic Meson internal PHY's have the same register layout as
certain SMSC PHY's (also for non-c22-standard registers). This seems
to be more than just coincidence. Apparently they also need the same
workaround for EDPD mode (energy detect power down). Therefore let's
export SMSC PHY driver functionality for use by the meson-gxl PHY
driver.
David S. Miller [Mon, 20 Mar 2023 10:20:40 +0000 (10:20 +0000)]
Merge branch 'ps3_gelic_net-fixes'
Geoff Levand says:
====================
net/ps3_gelic_net: DMA related fixes
v9: Make rx_skb_size local to gelic_descr_prepare_rx.
v8: Add more cpu_to_be32 calls.
v7: Remove all cleanups, sync to spider net.
v6: Reworked and cleaned up patches.
v5: Some additional patch cleanups.
v4: More patch cleanups.
v3: Cleaned up patches as requested.
====================
Geoff Levand [Sat, 18 Mar 2023 17:39:16 +0000 (17:39 +0000)]
net/ps3_gelic_net: Use dma_mapping_error
The current Gelic Etherenet driver was checking the return value of its
dma_map_single call, and not using the dma_mapping_error() routine.
Fixes runtime problems like these:
DMA-API: ps3_gelic_driver sb_05: device driver failed to check map error
WARNING: CPU: 0 PID: 0 at kernel/dma/debug.c:1027 .check_unmap+0x888/0x8dc
Fixes: 02c1889166b4 ("ps3: gigabit ethernet driver for PS3, take3") Reviewed-by: Alexander Duyck <[email protected]> Signed-off-by: Geoff Levand <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Geoff Levand [Sat, 18 Mar 2023 17:39:16 +0000 (17:39 +0000)]
net/ps3_gelic_net: Fix RX sk_buff length
The Gelic Ethernet device needs to have the RX sk_buffs aligned to
GELIC_NET_RXBUF_ALIGN, and also the length of the RX sk_buffs must
be a multiple of GELIC_NET_RXBUF_ALIGN.
The current Gelic Ethernet driver was not allocating sk_buffs large
enough to allow for this alignment.
Also, correct the maximum and minimum MTU sizes, and add a new
preprocessor macro for the maximum frame size, GELIC_NET_MAX_FRAME.
Fixes various randomly occurring runtime network errors.
Fixes: 02c1889166b4 ("ps3: gigabit ethernet driver for PS3, take3") Signed-off-by: Geoff Levand <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Tom Rix [Sat, 18 Mar 2023 13:13:42 +0000 (09:13 -0400)]
usb: plusb: remove unused pl_clear_QuickLink_features function
clang with W=1 reports
drivers/net/usb/plusb.c:65:1: error:
unused function 'pl_clear_QuickLink_features' [-Werror,-Wunused-function]
pl_clear_QuickLink_features(struct usbnet *dev, int val)
^
This static function is not used, so remove it.
Szymon Heidrich [Sat, 18 Mar 2023 09:25:52 +0000 (10:25 +0100)]
net: usb: lan78xx: Limit packet length to skb->len
Packet length retrieved from descriptor may be larger than
the actual socket buffer length. In such case the cloned
skb passed up the network stack will leak kernel memory contents.
Additionally prevent integer underflow when size is less than
ETH_FCS_LEN.
Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Szymon Heidrich <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Raed Salem [Tue, 14 Mar 2023 08:58:44 +0000 (10:58 +0200)]
net/mlx5e: Update IPsec per SA packets/bytes count
Providing per SA packets/bytes statistics mandates creating unique
counter per SA flow for Rx/Tx, whenever offloaded SA statistics is
desired query the specific SA counter to provide the stack with the
needed data.
Raed Salem [Tue, 14 Mar 2023 08:58:43 +0000 (10:58 +0200)]
net/mlx5e: Use one rule to count all IPsec Tx offloaded traffic
Currently one counter is shared between all IPsec Tx offloaded
rules to count the total amount of packets/bytes that was IPsec
Tx offloaded, replace this scheme by adding a new flow table (ft)
with one rule that counts all flows that passes through this
table (like Rx status ft), this ft is pointed by all IPsec Tx
offloaded rules. The above allows to have a counter per tx flow
rule in while keeping a separate global counter that store the
aggregation outcome of all these per flow counters.
Raed Salem [Tue, 14 Mar 2023 08:58:42 +0000 (10:58 +0200)]
net/mlx5e: Support IPsec acquire default SA
During XFRM stack acquire flow, a default SA is created to be updated
later, once acquire netlink message is handled in user space.
This SA is also passed to IPsec offload supporting driver, however this
SA acts only as placeholder and does not have context suitable for
offloading in HW yet. Identify this kind of SA by special offload flag
(XFRM_DEV_OFFLOAD_FLAG_ACQ), and create a SW only context.
In such cases with special mark so it won't be installed in HW in addition
flow and on remove/delete free this SW only context.
Raed Salem [Tue, 14 Mar 2023 08:58:41 +0000 (10:58 +0200)]
net/mlx5e: Allow policies with reqid 0, to support IKE policy holes
IKE policies hole, is special policy that exists to allow for IKE
traffic to bypass IPsec encryption even though there is already a
policies and SA(s) configured on same endpoints, these policies
does not nessecarly have the reqid configured, so need to add
an exception for such policies. These kind of policies are allowed
under the condition that at least upper protocol and/or ips
are not 0.
Raed Salem [Tue, 14 Mar 2023 08:58:40 +0000 (10:58 +0200)]
xfrm: copy_to_user_state fetch offloaded SA packets/bytes statistics
Both in RX and TX, the traffic that performs IPsec packet offload
transformation is accounted by HW only. Consequently, the HW should
be queried for packets/bytes statistics when user asks for such
transformation data.
Raed Salem [Tue, 14 Mar 2023 08:58:39 +0000 (10:58 +0200)]
xfrm: add new device offload acquire flag
During XFRM acquire flow, a default SA is created to be updated later,
once acquire netlink message is handled in user space. When the relevant
policy is offloaded this default SA is also offloaded to IPsec offload
supporting driver, however this SA does not have context suitable for
offloading in HW, nor is interesting to offload to HW, consequently needs
a special driver handling apart from other offloaded SA(s).
Add a special flag that marks such SA so driver can handle it correctly.
Zheng Wang [Sat, 18 Mar 2023 08:05:26 +0000 (16:05 +0800)]
net: qcom/emac: Fix use after free bug in emac_remove due to race condition
In emac_probe, &adpt->work_thread is bound with
emac_work_thread. Then it will be started by timeout
handler emac_tx_timeout or a IRQ handler emac_isr.
If we remove the driver which will call emac_remove
to make cleanup, there may be a unfinished work.
The possible sequence is as follows:
Fix it by finishing the work before cleanup in the emac_remove
and disable timeout response.
CPU0 CPU1
|emac_work_thread
emac_remove |
free_netdev |
kfree(netdev); |
|emac_reinit_locked
|emac_mac_down
|//use netdev Fixes: b9b17debc69d ("net: emac: emac gigabit ethernet controller driver") Signed-off-by: Zheng Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Vladimir Oltean [Fri, 17 Mar 2023 23:19:00 +0000 (01:19 +0200)]
net: dsa: report rx_bytes unadjusted for ETH_HLEN
We collect the software statistics counters for RX bytes (reported to
/proc/net/dev and to ethtool -S $dev | grep 'rx_bytes: ") at a time when
skb->len has already been adjusted by the eth_type_trans() ->
skb_pull_inline(skb, ETH_HLEN) call to exclude the L2 header.
This means that when connecting 2 DSA interfaces back to back and
sending 1 packet with length 100, the sending interface will report
tx_bytes as incrementing by 100, and the receiving interface will report
rx_bytes as incrementing by 86.
Since accounting for that in scripts is quirky and is something that
would be DSA-specific behavior (requiring users to know that they are
running on a DSA interface in the first place), the proposal is that we
treat it as a bug and fix it.
This design bug has always existed in DSA, according to my analysis:
commit 91da11f870f0 ("net: Distributed Switch Architecture protocol
support") also updates skb->dev->stats.rx_bytes += skb->len after the
eth_type_trans() call. Technically, prior to Florian's commit a86d8becc3f0 ("net: dsa: Factor bottom tag receive functions"), each and
every vendor-specific tagging protocol driver open-coded the same bug,
until the buggy code was consolidated into something resembling what can
be seen now. So each and every driver should have its own Fixes: tag,
because of their different histories until the convergence point.
I'm not going to do that, for the sake of simplicity, but just blame the
oldest appearance of buggy code.
There are 2 ways to fix the problem. One is the obvious way, and the
other is how I ended up doing it. Obvious would have been to move
dev_sw_netstats_rx_add() one line above eth_type_trans(), and below
skb_push(skb, ETH_HLEN). But DSA processing is not as simple as that.
We count the bytes after removing everything DSA-related from the
packet, to emulate what the packet's length was, on the wire, when the
user port received it.
When eth_type_trans() executes, dsa_untag_bridge_pvid() has not run yet,
so in case the switch driver requests this behavior - commit 412a1526d067 ("net: dsa: untag the bridge pvid from rx skbs") has the
details - the obvious variant of the fix wouldn't have worked, because
the positioning there would have also counted the not-yet-stripped VLAN
header length, something which is absent from the packet as seen on the
wire (there it may be untagged, whereas software will see it as
PVID-tagged).
Fixes: f613ed665bb3 ("net: dsa: Add support for 64-bit statistics") Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
David S. Miller [Mon, 20 Mar 2023 09:08:48 +0000 (09:08 +0000)]
Merge branch 'ocelot-external-ports'
Colin Foster says:
====================
add support for ocelot external ports
This is the start of part 3 of what is hopefully a 3-part series to add
Ethernet switching support to Ocelot chips.
Part 1 of the series (A New Chip) added general support for Ocelot chips
that were controlled externally via SPI.
https://lore.kernel.org/all/20220815005553.1450359[email protected]/
Part 2 of the series (The Ethernet Strikes Back) added DSA Ethernet
support for ports 0-3, which are the four copper ports that are internal
to the chip.
https://lore.kernel.org/all/20230127193559.1001051[email protected]/
Part 3 will, at a minimum, add support for ports 4-7, which are
configured to use QSGMII to an external phy (Return Of The QSGMII). With
any luck, and some guidance, support for SGMII, SFPs, etc. will also be
part of this series.
V1 was submitted as an RFC - and that was rightly so. I suspected I
wasn't doing something right, and that was certainly the case. V2 is
much cleaner, so hopefully upgrading it to PATCH status is welcomed.
Thanks to Russell and Vladimir for correcting my course from V1.
In V1 I included a device tree snippet. I won't repeat that here, but
I will include a boot log snippet, in case it is of use:
====================
Colin Foster [Fri, 17 Mar 2023 18:54:15 +0000 (11:54 -0700)]
net: dsa: ocelot: add support for external phys
The VSC7512 has four ports with internal phys that are already supported.
There are additional ports that can be configured to work with external
phys.
Colin Foster [Fri, 17 Mar 2023 18:54:14 +0000 (11:54 -0700)]
net: dsa: felix: allow serdes configuration for dsa ports
Ports for Ocelot devices (VSC7511, VSC7512, VSC7513 and VSC7514) support
external phys. When external phys are used, additional configuration on
each port is required to enable QSGMII mode and set external phy modes.
Add a configurable hook into these routines, so the external ports can be
used.
Colin Foster [Fri, 17 Mar 2023 18:54:12 +0000 (11:54 -0700)]
net: dsa: felix: attempt to initialize internal hsio plls
The VSC7512 and VSC7514 have internal PLLs that can be used to control
different peripherals. Initialize these high speed I/O (HSIO) PLLs when
they exist, so that dependent peripherals like QSGMII can function.
Colin Foster [Fri, 17 Mar 2023 18:54:11 +0000 (11:54 -0700)]
net: mscc: ocelot: expose serdes configuration function
During chip initialization, ports that use SGMII / QSGMII to interface to
external phys need to be configured on the VSC7513 and VSC7514. Expose this
configuration routine, so it can be used by DSA drivers.
The ocelot-switch driver can utilize the phylink_mac_config routine. Move
this to the ocelot library location and export the symbol to make this
possible.
Ocelot chips have an internal PLL that must be used when communicating
through external phys. Expose the init routine, so it can be used by other
drivers.
Colin Foster [Fri, 17 Mar 2023 18:54:07 +0000 (11:54 -0700)]
phy: phy-ocelot-serdes: add ability to be used in a non-syscon configuration
The phy-ocelot-serdes module has exclusively been used in a syscon setup,
from an internal CPU. The addition of external control of ocelot switches
via an existing MFD implementation means that syscon is no longer the only
interface that phy-ocelot-serdes will see.
In the MFD configuration, an IORESOURCE_REG resource will exist for the
device. Utilize this resource to be able to function in both syscon and
non-syscon configurations.
Linus Torvalds [Sun, 19 Mar 2023 17:46:02 +0000 (10:46 -0700)]
Merge tag 'trace-v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix setting affinity of hwlat threads in containers
Using sched_set_affinity() has unwanted side effects when being
called within a container. Use set_cpus_allowed_ptr() instead
- Fix per cpu thread management of the hwlat tracer:
- Do not start per_cpu threads if one is already running for the CPU
- When starting per_cpu threads, do not clear the kthread variable
as it may already be set to running per cpu threads
- Fix return value for test_gen_kprobe_cmd()
On error the return value was overwritten by being set to the result
of the call from kprobe_event_delete(), which would likely succeed,
and thus have the function return success
- Fix splice() reads from the trace file that was broken by commit 36e2c7421f02 ("fs: don't allow splice read/write without explicit
ops")
- Remove obsolete and confusing comment in ring_buffer.c
The original design of the ring buffer used struct page flags for
tricks to optimize, which was shortly removed due to them being
tricks. But a comment for those tricks remained
- Set local functions and variables to static
* tag 'trace-v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/hwlat: Replace sched_setaffinity with set_cpus_allowed_ptr
ring-buffer: remove obsolete comment for free_buffer_page()
tracing: Make splice_read available again
ftrace: Set direct_ops storage-class-specifier to static
trace/hwlat: Do not start per-cpu thread if it is already running
trace/hwlat: Do not wipe the contents of per-cpu thread data
tracing/osnoise: set several trace_osnoise.c variables storage-class-specifier to static
tracing: Fix wrong return in kprobe_event_gen_test.c
Costa Shulyupin [Thu, 16 Mar 2023 14:45:35 +0000 (16:45 +0200)]
tracing/hwlat: Replace sched_setaffinity with set_cpus_allowed_ptr
There is a problem with the behavior of hwlat in a container,
resulting in incorrect output. A warning message is generated:
"cpumask changed while in round-robin mode, switching to mode none",
and the tracing_cpumask is ignored. This issue arises because
the kernel thread, hwlatd, is not a part of the container, and
the function sched_setaffinity is unable to locate it using its PID.
Additionally, the task_struct of hwlatd is already known.
Ultimately, the function set_cpus_allowed_ptr achieves
the same outcome as sched_setaffinity, but employs task_struct
instead of PID.
Vlastimil Babka [Wed, 15 Mar 2023 14:24:46 +0000 (15:24 +0100)]
ring-buffer: remove obsolete comment for free_buffer_page()
The comment refers to mm/slob.c which is being removed. It comes from
commit ed56829cb319 ("ring_buffer: reset buffer page when freeing") and
according to Steven the borrowed code was a page mapcount and mapping
reset, which was later removed by commit e4c2ce82ca27 ("ring_buffer:
allocate buffer page pointer"). Thus the comment is not accurate anyway,
remove it.
Sung-hun Kim [Tue, 14 Mar 2023 01:37:07 +0000 (10:37 +0900)]
tracing: Make splice_read available again
Since the commit 36e2c7421f02 ("fs: don't allow splice read/write
without explicit ops") is applied to the kernel, splice() and
sendfile() calls on the trace file (/sys/kernel/debug/tracing
/trace) return EINVAL.
This patch restores these system calls by initializing splice_read
in file_operations of the trace file. This patch only enables such
functionalities for the read case.
Linus Torvalds [Sun, 19 Mar 2023 16:57:53 +0000 (09:57 -0700)]
Merge tag 'ras_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS fix from Borislav Petkov:
- Flush out logged errors immediately after MCA banks configuration
changes over sysfs have been done instead of waiting until something
else triggers the workqueue later - another error or the polling
interval cycle is reached
* tag 'ras_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Make sure logged MCEs are processed after sysfs update
Linus Torvalds [Sun, 19 Mar 2023 16:47:55 +0000 (09:47 -0700)]
Merge tag 'perf_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Check whether sibling events have been deactivated before adding them
to groups
- Update the proper event time tracking variable depending on the event
type
- Fix a memory overwrite issue due to using the wrong function argument
when outputting perf events
* tag 'perf_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix check before add_event_to_groups() in perf_group_detach()
perf: fix perf_event_context->time
perf/core: Fix perf_output_begin parameter is incorrectly invoked in perf_event_bpf_output
Linus Torvalds [Sun, 19 Mar 2023 16:43:41 +0000 (09:43 -0700)]
Merge tag 'x86_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"There's a little bit more 'movement' in there for my taste but it
needs to happen and should make the code better after it.
- Check cmdline_find_option()'s return value before further
processing
- Clear temporary storage in the resctrl code to prevent access to an
unexistent MSR
- Add a simple throttling mechanism to protect the hypervisor from
potentially malicious SEV guests issuing requests in rapid
succession.
In order to not jeopardize the sanity of everyone involved in
maintaining this code, the request issuing side has received a
cleanup, split in more or less trivial, small and digestible
pieces. Otherwise, the code was threatening to become an
unmaintainable mess.
Therefore, that cleanup is marked indirectly also for stable so
that there's no differences between the upstream code and the
stable variant when it comes down to backporting more there"
* tag 'x86_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Fix use of uninitialized buffer in sme_enable()
x86/resctrl: Clear staged_config[] before and after it is used
virt/coco/sev-guest: Add throttling awareness
virt/coco/sev-guest: Convert the sw_exit_info_2 checking to a switch-case
virt/coco/sev-guest: Do some code style cleanups
virt/coco/sev-guest: Carve out the request issuing logic into a helper
virt/coco/sev-guest: Remove the disable_vmpck label in handle_guest_request()
virt/coco/sev-guest: Simplify extended guest request handling
virt/coco/sev-guest: Check SEV_SNP attribute at probe time
To fix the issue, check if the hwlatd thread for the cpu is already
running, before starting a new one. Along with the previous patch, this
avoids running multiple instances of the same CPU thread on the system.
Tero Kristo [Fri, 10 Mar 2023 10:04:50 +0000 (12:04 +0200)]
trace/hwlat: Do not wipe the contents of per-cpu thread data
Do not wipe the contents of the per-cpu kthread data when starting the
tracer, as this will completely forget about already running instances
and can later start new additional per-cpu threads.
Tom Rix [Thu, 9 Mar 2023 15:04:14 +0000 (10:04 -0500)]
tracing/osnoise: set several trace_osnoise.c variables storage-class-specifier to static
smatch reports several similar warnings
kernel/trace/trace_osnoise.c:220:1: warning:
symbol '__pcpu_scope_per_cpu_osnoise_var' was not declared. Should it be static?
kernel/trace/trace_osnoise.c:243:1: warning:
symbol '__pcpu_scope_per_cpu_timerlat_var' was not declared. Should it be static?
kernel/trace/trace_osnoise.c:335:14: warning:
symbol 'interface_lock' was not declared. Should it be static?
kernel/trace/trace_osnoise.c:2242:5: warning:
symbol 'timerlat_min_period' was not declared. Should it be static?
kernel/trace/trace_osnoise.c:2243:5: warning:
symbol 'timerlat_max_period' was not declared. Should it be static?
These variables are only used in trace_osnoise.c, so it should be static
Anton Gusev [Tue, 31 Jan 2023 07:58:18 +0000 (10:58 +0300)]
tracing: Fix wrong return in kprobe_event_gen_test.c
Overwriting the error code with the deletion result may cause the
function to return 0 despite encountering an error. Commit b111545d26c0
("tracing: Remove the useless value assignment in
test_create_synth_event()") solves a similar issue by
returning the original error code, so this patch does the same.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Ido Schimmel [Fri, 17 Mar 2023 15:32:59 +0000 (16:32 +0100)]
mlxsw: core_thermal: Fix fan speed in maximum cooling state
The cooling levels array is supposed to prevent the system fans from
being configured below a 20% duty cycle as otherwise some of them get
stuck at 0 RPM.
Due to an off-by-one error, the last element in the array was not
initialized, causing it to be set to zero, which in turn lead to fans
being configured with a 0% duty cycle in maximum cooling state.
Since commit 332fdf951df8 ("mlxsw: thermal: Fix out-of-bounds memory
accesses") the contents of the array are static. Therefore, instead of
fixing the initialization of the array, simply remove it and adjust
thermal_cooling_device_ops::set_cur_state() so that the configured duty
cycle is never set below 20%.
This bug was uncovered when the thermal subsystem repeatedly tried to
configure the cooling devices to their maximum state due to another
issue [1]. This resulted in the fans being stuck at 0 RPM, which
eventually lead to the system undergoing thermal shutdown.
David S. Miller [Sun, 19 Mar 2023 15:21:48 +0000 (15:21 +0000)]
Merge branch 'lan966x-tx-rx-improve'
Horatiu Vultur says:
====================
net: lan966x: Improve TX/RX of frames from/to CPU
The first patch of this series improves the RX side. As it seems to be
an expensive operation to read the RX timestamp for every frame, then
read it only if it is required. This will give an improvement of ~70mbit
on the RX side.
The second patch stops using the packing library. This improves mostly
the TX side as this library is used to set diffent bits in the IFH. If
this library is replaced with a more simple/shorter implementation,
this gives an improvement of more than 100mbit on TX side.
All the measurements were done using iperf3.
v1->v2:
- update lan966x_ifh_set to set the bytes and not each bit individually
====================
Horatiu Vultur [Fri, 17 Mar 2023 15:27:13 +0000 (16:27 +0100)]
net: lan966x: Stop using packing library
When a frame is injected from CPU, it is required to create an IFH(Inter
frame header) which sits in front of the frame that is transmitted.
This IFH, contains different fields like destination port, to bypass the
analyzer, priotity, etc. Lan966x it is using packing library to set and
get the fields of this IFH. But this seems to be an expensive
operations.
If this is changed with a simpler implementation, the RX will be
improved with ~5Mbit while on the TX is a much bigger improvement as it
is required to set more fields. Below are the numbers for TX.
Horatiu Vultur [Fri, 17 Mar 2023 15:27:12 +0000 (16:27 +0100)]
net: lan966x: Don't read RX timestamp if not needed
Whenever a frame was received to the CPU, the HW is timestamping the
frame. In the IFH(Inter Frame Header) it is found the nanosecond part
of the timestamps the SW is required to read from HW the second part.
But reading the second part it seems to be a expensive operations, so
so change this such to read the second part only when rx filter is
enabled.
Doing this change gives the RX a performance boost of ~70mbit.
net: sfp: fix state loss when updating state_hw_mask
Andrew reports that the SFF modules on one of the ZII platforms do not
indicate link up due to the SFP code believing that LOS indicating that
there is no signal being received from the remote end, but in fact the
LOS signal is showing that there is signal.
What makes SFF modules different from SFPs is they typically have an
inverted LOS, which uncovered this issue. When we read the hardware
state, we mask it with state_hw_mask so we ignore anything we're not
interested in. However, we don't re-read when state_hw_mask changes,
leading to sfp->state being stale.
Arrange for a software poll of the module state after we have parsed
the EEPROM in sfp_sm_mod_probe() and updated state_*_mask. This will
generate any necessary events for signal changes for the state
machine as well as updating sfp->state.
Jochen Henneberg [Fri, 17 Mar 2023 08:08:17 +0000 (09:08 +0100)]
net: stmmac: Fix for mismatched host/device DMA address width
Currently DMA address width is either read from a RO device register
or force set from the platform data. This breaks DMA when the host DMA
address width is <=32it but the device is >32bit.
Right now the driver may decide to use a 2nd DMA descriptor for
another buffer (happens in case of TSO xmit) assuming that 32bit
addressing is used due to platform configuration but the device will
still use both descriptor addresses as one address.
This can be observed with the Intel EHL platform driver that sets
32bit for addr64 but the MAC reports 40bit. The TX queue gets stuck in
case of TCP with iptables NAT configuration on TSO packets.
The logic should be like this: Whatever we do on the host side (memory
allocation GFP flags) should happen with the host DMA width, whenever
we decide how to set addresses on the device registers we must use the
device DMA address width.
This patch renames the platform address width field from addr64 (term
used in device datasheet) to host_addr and uses this value exclusively
for host side operations while all chip operations consider the device
DMA width as read from the device register.
Fixes: 7cfc4486e7ea ("stmmac: intel: Configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressing") Signed-off-by: Jochen Henneberg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Harini Katakam [Fri, 17 Mar 2023 11:39:43 +0000 (17:09 +0530)]
net: macb: Reset TX when TX halt times out
Reset TX when halt times out i.e. disable TX, clean up TX BDs,
interrupts (already done) and enable TX.
This addresses the issue observed when iperf is run at 10Mps Half
duplex where, after multiple collisions and retries, TX halts.
Tony Nguyen [Fri, 17 Mar 2023 20:09:03 +0000 (13:09 -0700)]
ixgb: Remove ixgb driver
There are likely no users of this driver as the hardware has been
discontinued since 2010. Remove the driver and all references to it
in documentation.
Florian Fainelli [Thu, 16 Mar 2023 23:33:17 +0000 (16:33 -0700)]
net: mdio: fix owner field for mdio buses registered using ACPI
Bus ownership is wrong when using acpi_mdiobus_register() to register an
mdio bus. That function is not inline, so when it calls
mdiobus_register() the wrong THIS_MODULE value is captured.
Maxime Bizon [Thu, 16 Mar 2023 23:33:16 +0000 (16:33 -0700)]
net: mdio: fix owner field for mdio buses registered using device-tree
Bus ownership is wrong when using of_mdiobus_register() to register an mdio
bus. That function is not inline, so when it calls mdiobus_register() the wrong
THIS_MODULE value is captured.
Signed-off-by: Maxime Bizon <[email protected]> Fixes: 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs")
[florian: fix kdoc, added Fixes tag] Signed-off-by: Florian Fainelli <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Florian Fainelli [Thu, 16 Mar 2023 20:33:24 +0000 (13:33 -0700)]
net: phy: Ensure state transitions are processed from phy_stop()
In the phy_disconnect() -> phy_stop() path, we will be forcibly setting
the PHY state machine to PHY_HALTED. This invalidates the old_state !=
phydev->state condition in phy_state_machine() such that we will neither
display the state change for debugging, nor will we invoke the
link_change_notify() callback.
Factor the code by introducing phy_process_state_change(), and ensure
that we process the state change from phy_stop() as well.
Fixes: 5c5f626bcace ("net: phy: improve handling link_change_notify callback") Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
David S. Miller [Sun, 19 Mar 2023 10:44:24 +0000 (10:44 +0000)]
Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-03-16 (igb, igbvf, igc)
This series contains updates to igb, igbvf, and igc drivers.
Lin Ma removes rtnl_lock() when disabling SRIOV on remove which was
causing deadlock on igb.
Akihiko Odaki delays enabling of SRIOV on igb to prevent early messages
that could get ignored and clears MAC address when PF returns nack on
reset; indicating no MAC address was assigned for igbvf.
Gaosheng Cui frees IRQs in error path for igbvf.
Akashi Takahiro fixes logic on checking TAPRIO gate support for igc.
====================
Zheng Wang [Thu, 16 Mar 2023 16:15:26 +0000 (00:15 +0800)]
xirc2ps_cs: Fix use after free bug in xirc2ps_detach
In xirc2ps_probe, the local->tx_timeout_task was bounded
with xirc2ps_tx_timeout_task. When timeout occurs,
it will call xirc_tx_timeout->schedule_work to start the
work.
When we call xirc2ps_detach to remove the driver, there
may be a sequence as follows:
Stop responding to timeout tasks and complete scheduled
tasks before cleanup in xirc2ps_detach, which will fix
the problem.
Andy Shevchenko [Thu, 16 Mar 2023 12:08:26 +0000 (14:08 +0200)]
net: phy: at803x: Replace of_gpio.h with what indeed is used
of_gpio.h in this driver is solely used as a proxy to other headers.
This is incorrect usage of the of_gpio.h. Replace it .h with what
indeed is used in the code.
Andy Shevchenko [Thu, 16 Mar 2023 12:04:19 +0000 (14:04 +0200)]
net: smc91x: Replace of_gpio.h with what indeed is used
of_gpio.h in this driver is solely used as a proxy to other headers.
This is incorrect usage of the of_gpio.h. Replace it .h with what
indeed is used in the code.
Daniil Tatianin [Thu, 16 Mar 2023 10:29:21 +0000 (13:29 +0300)]
qed/qed_sriov: guard against NULL derefs from qed_iov_get_vf_info
We have to make sure that the info returned by the helper is valid
before using it.
Found by Linux Verification Center (linuxtesting.org) with the SVACE
static analysis tool.
Fixes: f990c82c385b ("qed*: Add support for ndo_set_vf_trust") Fixes: 733def6a04bf ("qed*: IOV link control") Signed-off-by: Daniil Tatianin <[email protected]> Reviewed-by: Michal Swiatkowski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Eric Biggers [Mon, 13 Mar 2023 22:12:31 +0000 (15:12 -0700)]
fscrypt: check for NULL keyring in fscrypt_put_master_key_activeref()
It is a bug for fscrypt_put_master_key_activeref() to see a NULL
keyring. But it used to be possible due to the bug, now fixed, where
fscrypt_destroy_keyring() was called before security_sb_delete(). To be
consistent with how fscrypt_destroy_keyring() uses WARN_ON for the same
issue, WARN and leak the fscrypt_master_key if the keyring is NULL
instead of dereferencing the NULL pointer.
Linus Torvalds [Sat, 18 Mar 2023 23:01:34 +0000 (16:01 -0700)]
Merge tag 'fbdev-for-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
"The majority of lines changed is due to a code style cleanup in the
pnmtologo helper program.
Arnd removed the omap1 osk driver and the SIS fb driver is now
orphaned.
Other than that it's the usual bunch of small fixes and cleanups, e.g.
prevent possible divide-by-zero in various fb drivers if the pixclock
is zero and various conversions to devm_platform*() and of_property*()
functions:
- Drop omap1 osk driver
- Various potential divide by zero pixclock fixes
- Add pixelclock and fb_check_var() to stifb
- Code style cleanups and indenting fixes"
* tag 'fbdev-for-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: Use of_property_present() for testing DT property presence
fbdev: au1200fb: Fix potential divide by zero
fbdev: lxfb: Fix potential divide by zero
fbdev: intelfb: Fix potential divide by zero
fbdev: nvidia: Fix potential divide by zero
fbdev: stifb: Provide valid pixelclock and add fb_check_var() checks
fbdev: omapfb: remove omap1 osk driver
fbdev: xilinxfb: Use devm_platform_get_and_ioremap_resource()
fbdev: wm8505fb: Use devm_platform_ioremap_resource()
fbdev: pxa3xx-gcu: Use devm_platform_get_and_ioremap_resource()
fbdev: Use of_property_read_bool() for boolean properties
fbdev: clps711x-fb: Use devm_platform_get_and_ioremap_resource()
fbdev: tgafb: Fix potential divide by zero
MAINTAINERS: orphan SIS FRAMEBUFFER DRIVER
fbdev: omapfb: cleanup inconsistent indentation
drivers: video: logo: add SPDX comment, remove GPL notice in pnmtologo.c
drivers: video: logo: fix code style issues in pnmtologo.c
Linus Torvalds [Sat, 18 Mar 2023 18:49:48 +0000 (11:49 -0700)]
Merge tag 'kbuild-fixes-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Exclude kallsyms_seqs_of_names from kallsyms to fix build error
- Fix 'make kernelrelease' for external module builds
- Get the Debian source package compilable again
- Fix the wrong uname when Debian packages are built with the
KDEB_PKGVERSION option
- Fix superfluous CROSS_COMPILE when building Debian packages
- Fix RPM package build error when KCONFIG_CONFIG is set
- Use 'git archive' for creating source tarballs
- Remove the scripts/list-gitignored tool
* tag 'kbuild-fixes-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: use git-archive for source package creation
kbuild: rpm-pkg: move source components to rpmbuild/SOURCES
kbuild: deb-pkg: use dh_listpackages to know enabled packages
kbuild: deb-pkg: split image and debug objects staging out into functions
kbuild: deb-pkg: set CROSS_COMPILE only when undefined
kbuild: deb-pkg: do not take KERNELRELEASE from the source version
kbuild: deb-pkg: make debian source package working again
Makefile: Make kernelrelease target work with M=
kconfig: Update config changed flag before calling callback
kallsyms: add kallsyms_seqs_of_names to list of special symbols
Linus Torvalds [Sat, 18 Mar 2023 18:33:44 +0000 (11:33 -0700)]
Merge tag 'hwmon-for-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- ltc2992, adm1266: Set missing can_sleep flag
- tmp512/tmp513: Drop of_match_ptr for ID table to fix build with
!CONFIG_OF
- ucd90320: Fix back-to-back access problem
- ina3221: Fix bad error return from probe function
- xgene: Fix use-after-free bug in remove function
- adt7475: Fix hysteresis register bit masks, and fix association of
'smoothing' attributes
* tag 'hwmon-for-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (ltc2992) Set `can_sleep` flag for GPIO chip
hwmon: (adm1266) Set `can_sleep` flag for GPIO chip
hwmon: tmp512: drop of_match_ptr for ID table
hwmon: (ucd90320) Add minimum delay between bus accesses
hwmon: (ina3221) return prober error code
hwmon: (xgene) Fix use after free bug in xgene_hwmon_remove due to race condition
hwmon: (adt7475) Fix masking of hysteresis registers
hwmon: (adt7475) Display smoothing attributes in correct order
Linus Torvalds [Sat, 18 Mar 2023 18:25:39 +0000 (11:25 -0700)]
Merge tag 'ata-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fixes from Damien Le Moal:
- Two fixes from Ondrej for the pata_parport driver to address an issue
with error handling during drive connection and to fix memory leaks
in case of errors during initialization and when disconnecting a
device.
* tag 'ata-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: pata_parport: fix memory leaks
ata: pata_parport: fix parport release without claim
The __find_restype() function loops over the m5mols_default_ffmt[]
array, and the termination condition ends up being wrong: instead of
stopping when the iterator becomes the size of the array it traverses,
it stops after it has already overshot the array.
Now, in practice this doesn't likely matter, because the code will
always find the entry it looks for, and will thus return early and never
hit that last extra iteration.
But it turns out that clang will unroll the loop fully, because it has
only two iterations (well, three due to the off-by-one bug), and then
clang will end up just giving up in the middle of the loop unrolling
when it notices that the code walks past the end of the array.
And that made 'objtool' very unhappy indeed, because the generated code
just falls off the edge of the universe, and ends up falling through to
the next function, causing this warning:
drivers/media/i2c/m5mols/m5mols.o: warning: objtool: m5mols_set_fmt() falls through to next function m5mols_get_frame_desc()
This is a follow-up of d27d367d3b78 ("inet: better const qualifier awareness")
Adopting container_of_const() to perform (struct sock *)->(protocol sock *)
operation is allowing us to propagate const qualifier and thus detect
misuses at compile time.
Most conversions are trivial, because most protocols did not adopt yet
const sk pointers where it could make sense.
Only mptcp and tcp patches (end of this series) are requiring small
adjustments.
====================
Eric Dumazet [Fri, 17 Mar 2023 15:55:39 +0000 (15:55 +0000)]
tcp: preserve const qualifier in tcp_sk()
We can change tcp_sk() to propagate its argument const qualifier,
thanks to container_of_const().
We have two places where a const sock pointer has to be upgraded
to a write one. We have been using const qualifier for lockless
listeners to clearly identify points where writes could happen.
Add tcp_sk_rw() helper to better document these.
tcp_inbound_md5_hash(), __tcp_grow_window(), tcp_reset_check()
and tcp_rack_reo_wnd() get an additional const qualififer
for their @tp local variables.
smc_check_reset_syn_req() also needs a similar change.
====================
net/mlx5e: Add GBP VxLAN HW offload support
Patch-1: Remove unused argument from functions.
Patch-2: Expose helper function vxlan_build_gbp_hdr.
Patch-3: Add helper function for encap_info_equal for tunnels with options.
Patch-4: Preserving the const-ness of the pointer in ip_tunnel_info_opts.
Patch-5: Add HW offloading support for TC flows with VxLAN GBP encap/decap
in mlx ethernet driver.
====================
projects / linux.git / log