Only RX side for now and small message to test the setup.
In the future, we can extend it to TX side and to testing
both sides with a couple of megs of data.
make \
-C tools/testing/selftests \
TARGETS="drivers/hw/net" \
install INSTALL_PATH=~/tmp/ksft
selftests: ncdevmem: Run selftest when none of the -s or -c has been provided
This will be used as a 'probe' mode in the selftest to check whether
the device supports the devmem or not. Use hard-coded queue layout
(two last queues) and prevent user from passing custom -q and/or -t.
selftests: ncdevmem: Use YNL to enable TCP header split
In the next patch the hard-coded queue numbers are gonna be removed.
So introduce some initial support for ethtool YNL and use
it to enable header split.
Also, tcp-data-split requires latest ethtool which is unlikely
to be present in the distros right now.
(ideally, we should not shell out to ethtool at all).
====================
net: stmmac: dwmac4: Fixes issues in dwmac4
This patch series fixes issues in the dwmac4 driver. These three patches
don't cause any user-visible issues, so they are targeted for net-next.
Patch #1:
Corrects the masking logic in the MTL Operation Mode RTC mask and shift
macros. The current code lacks the use of the ~ operator, which is
necessary to clear the bits properly.
Patch #2:
Addresses inaccuracies in the MTL_OP_MODE_*_MASK macros. The RTC fields
are located in bits [1:0], and this patch ensures the mask and shift
macros use the appropriate values to reflect this.
Patch #3:
Moves the handling of the Receive Watchdog Timeout (RWT) out of the
Abnormal Interrupt Summary (AIS) condition. According to the databook,
the RWT interrupt is not included in the AIS.
Ley Foon Tan [Thu, 7 Nov 2024 06:36:36 +0000 (14:36 +0800)]
net: stmmac: dwmac4: Receive Watchdog Timeout is not in abnormal interrupt summary
The Receive Watchdog Timeout (RWT, bit[9]) is not part of Abnormal
Interrupt Summary (AIS). Move the RWT handling out of the AIS
condition statement.
From databook, the AIS is the logical OR of the following interrupt bits:
- Bit 1: Transmit Process Stopped
- Bit 7: Receive Buffer Unavailable
- Bit 8: Receive Process Stopped
- Bit 10: Early Transmit Interrupt
- Bit 12: Fatal Bus Error
- Bit 13: Context Descriptor Error
net: ti: icssg-prueth: Add VLAN support for HSR mode
Add support for VLAN addition/deletion in HSR mode.
In HSR mode, even if the host port is not a member of
the VLAN domain, the slave ports should simply forward the
frames. So allow forwarding of all VLAN frames in HSR mode.
This patch adds support for VLAN ctag based filtering at slave devices.
The slave ethernet device may be capable of filtering ethernet packets
based on VLAN ID. This requires that when the VLAN interface is created
over an HSR/PRP interface, it passes the VID information to the
associated slave ethernet devices so that it updates the hardware
filters to filter ethernet frames based on VID. This patch adds the
required functions to propagate the vid information to the slave
devices.
====================
Side MDIO Support for LAN937x Switches
This patch set introduces support for an internal MDIO bus in LAN937x
switches, enabling the use of a side MDIO channel for PHY management
while keeping SPI as the main interface for switch configuration.
other changelogs are added to separate patches.
====================
Oleksij Rempel [Wed, 6 Nov 2024 07:59:41 +0000 (08:59 +0100)]
net: dsa: microchip: parse PHY config from device tree
Introduce ksz_parse_dt_phy_config() to validate and parse PHY
configuration from the device tree for KSZ switches. This function
ensures proper setup of internal PHYs by checking `phy-handle`
properties, verifying expected PHY IDs, and handling parent node
mismatches. Sets the PHY mask on the MII bus if validation is
successful. Returns -EINVAL on configuration errors.
Oleksij Rempel [Wed, 6 Nov 2024 07:59:40 +0000 (08:59 +0100)]
net: dsa: microchip: add support for side MDIO interface in LAN937x
Implement side MDIO channel support for LAN937x switches, providing an
alternative to SPI for PHY management alongside existing SPI-based
switch configuration. This is needed to reduce SPI load, as SPI can be
relatively expensive for small packets compared to MDIO support.
Also, implemented static mappings for PHY addresses for various LAN937x
models to support different internal PHY configurations. Since the PHY
address mappings are not equal to the port indexes, this patch also
provides PHY address calculation based on hardware strapping
configuration.
Oleksij Rempel [Wed, 6 Nov 2024 07:59:38 +0000 (08:59 +0100)]
net: dsa: microchip: Refactor MDIO handling for side MDIO access
Add support for accessing PHYs via a side MDIO interface in LAN937x
switches. The existing code already supports accessing PHYs via main
management interfaces, which can be SPI, I2C, or MDIO, depending on the
chip variant. This patch enables using a side MDIO bus, where SPI is
used for the main switch configuration and MDIO for managing the
integrated PHYs. On LAN937x, this is optional, allowing them to operate
in both configurations: SPI only, or SPI + MDIO. Typically, the SPI
interface is used for switch configuration, while MDIO handles PHY
management.
Additionally, update interrupt controller code to support non-linear
port to PHY address mapping, enabling correct interrupt handling for
configurations where PHY addresses do not directly correspond to port
indexes. This change ensures that the interrupt mechanism properly
aligns with the new, flexible PHY address mappings introduced by side
MDIO support.
Oleksij Rempel [Wed, 6 Nov 2024 07:59:37 +0000 (08:59 +0100)]
dt-bindings: net: dsa: microchip: add mdio-parent-bus property for internal MDIO
Introduce `mdio-parent-bus` property in the ksz DSA bindings to
reference the parent MDIO bus when the internal MDIO bus is attached to
it, bypassing the main management interface.
Mohammad Heib [Thu, 7 Nov 2024 12:07:39 +0000 (14:07 +0200)]
net: atlantic: use irq_update_affinity_hint()
irq_set_affinity_hint() is deprecated, Use irq_update_affinity_hint()
instead. This removes the side-effect of actually applying the affinity.
The driver does not really need to worry about spreading its IRQs across
CPUs. The core code already takes care of that. when the driver applies the
affinities by itself, it breaks the users' expectations:
1. The user configures irqbalance with IRQBALANCE_BANNED_CPULIST in
order to prevent IRQs from being moved to certain CPUs that run a
real-time workload.
2. atlantic device reopening will resets the affinity
in aq_ndev_open().
3. atlantic has no idea about irqbalance's config, so it may move an IRQ to
a banned CPU. The real-time workload suffers unacceptable latency.
Mohammad Heib [Thu, 7 Nov 2024 11:50:02 +0000 (13:50 +0200)]
nfp: use irq_update_affinity_hint()
irq_set_affinity_hint() is deprecated, Use irq_update_affinity_hint()
instead. This removes the side-effect of actually applying the affinity.
The driver does not really need to worry about spreading its IRQs across
CPUs. The core code already takes care of that. when the driver applies the
affinities by itself, it breaks the users' expectations:
1. The user configures irqbalance with IRQBALANCE_BANNED_CPULIST in
order to prevent IRQs from being moved to certain CPUs that run a
real-time workload.
2. nfp device reopening will resets the affinity
in nfp_net_netdev_open().
3. nfp has no idea about irqbalance's config, so it may move an IRQ to
a banned CPU. The real-time workload suffers unacceptable latency.
Mohammad Heib [Wed, 6 Nov 2024 18:08:11 +0000 (20:08 +0200)]
bnxt_en: use irq_update_affinity_hint()
irq_set_affinity_hint() is deprecated, Use irq_update_affinity_hint()
instead. This removes the side-effect of actually applying the affinity.
The driver does not really need to worry about spreading its IRQs across
CPUs. The core code already takes care of that. when the driver applies the
affinities by itself, it breaks the users' expectations:
1. The user configures irqbalance with IRQBALANCE_BANNED_CPULIST in
order to prevent IRQs from being moved to certain CPUs that run a
real-time workload.
2. bnxt_en device reopening will resets the affinity
in bnxt_open().
3. bnxt_en has no idea about irqbalance's config, so it may move an IRQ to
a banned CPU. The real-time workload suffers unacceptable latency.
ipv6: Fix soft lockups in fib6_select_path under high next hop churn
Soft lockups have been observed on a cluster of Linux-based edge routers
located in a highly dynamic environment. Using the `bird` service, these
routers continuously update BGP-advertised routes due to frequently
changing nexthop destinations, while also managing significant IPv6
traffic. The lockups occur during the traversal of the multipath
circular linked-list in the `fib6_select_path` function, particularly
while iterating through the siblings in the list. The issue typically
arises when the nodes of the linked list are unexpectedly deleted
concurrently on a different core—indicated by their 'next' and
'previous' elements pointing back to the node itself and their reference
count dropping to zero. This results in an infinite loop, leading to a
soft lockup that triggers a system panic via the watchdog timer.
Apply RCU primitives in the problematic code sections to resolve the
issue. Where necessary, update the references to fib6_siblings to
annotate or use the RCU APIs.
Include a test script that reproduces the issue. The script
periodically updates the routing table while generating a heavy load
of outgoing IPv6 traffic through multiple iperf3 clients. It
consistently induces infinite soft lockups within a couple of minutes.
The logic of eq_update_ci() is duplicated in mlx5_eq_update_ci(). The
only additional work done by mlx5_eq_update_ci() is to increment
eq->cons_index. Call eq_update_ci() from mlx5_eq_update_ci() to avoid
the duplication.
The memory barrier in eq_update_ci() after the doorbell write is a
significant hot spot in mlx5_eq_comp_int(). Under heavy TCP load, we see
3% of CPU time spent on the mfence instruction.
98df6d5b877c ("net/mlx5: A write memory barrier is sufficient in EQ ci
update") already relaxed the full memory barrier to just a write barrier
in mlx5_eq_update_ci(), which duplicates eq_update_ci(). So replace mb()
with wmb() in eq_update_ci() too.
On strongly ordered architectures, no barrier is actually needed because
the MMIO writes to the doorbell register are guaranteed to appear to the
device in the order they were made. However, the kernel's ordered MMIO
primitive writel() lacks a convenient big-endian interface.
Therefore, we opt to stick with __raw_writel() + a barrier.
====================
macsec: inherit lower device's features and TSO limits when offloading
When macsec is offloaded to a NIC, we can take advantage of some of
its features, mainly TSO and checksumming. This increases performance
significantly. Some features cannot be inherited, because they require
additional ops that aren't provided by the macsec netdevice.
We also need to inherit TSO limits from the lower device, like
VLAN/macvlan devices do.
This series also moves the existing macsec offload selftest to the
netdevsim selftests before adding tests for the new features. To allow
this new selftest to work, netdevsim's hw_features are expanded.
====================
Sabrina Dubroca [Wed, 6 Nov 2024 23:13:34 +0000 (00:13 +0100)]
selftests: netdevsim: add ethtool features to macsec offload tests
The test verifies that available features aren't changed by toggling
offload on the device. Creating a device with offload off and then
enabling it later should result in the same features as creating the
device with offload enabled directly.
Sabrina Dubroca [Wed, 6 Nov 2024 23:13:29 +0000 (00:13 +0100)]
macsec: add some of the lower device's features when offloading
This commit extends the set of netdevice features supported by macsec
devices when offload is enabled, which increases performance
significantly (for a single TCP stream: 17.5Gbps to 38.5Gbps on my
test machines).
Commit c850240b6c41 ("net: macsec: report real_dev features when HW
offloading is enabled") previously attempted something similar, but
had to be reverted (commit 8bcd560ae878 ("Revert "net: macsec: report
real_dev features when HW offloading is enabled"")) because the set of
features it exposed was too large.
During initialization, all features are set, and they're then removed
via ndo_fix_features (macsec_fix_features). This allows the
offloadable features to be automatically enabled if offloading is
turned on after device creation.
Sabrina Dubroca [Wed, 6 Nov 2024 23:13:27 +0000 (00:13 +0100)]
netdevsim: add more hw_features
netdevsim currently only set HW_TC in its hw_features, but other
features should also be present to better reflect the behavior of real
HW.
In my macsec offload testing, this ends up as HW_CSUM being missing
from hw_features, so it doesn't stick in wanted_features when offload
is turned off. Then HW_CSUM (and thus TSO, thanks to
netdev_fix_features) is not automatically turned back on when offload
is re-enabled.
====================
Replace page_frag with page_frag_cache (Part-1)
This is part 1 of "Replace page_frag with page_frag_cache",
which mainly contain refactoring and optimization for the
implementation of page_frag API before the replacing.
As the discussion in [1], it would be better to target net-next
tree to get more testing as all the callers page_frag API are
in networking, and the chance of conflicting with MM tree seems
low as implementation of page_frag API seems quite self-contained.
After [2], there are still two implementations for page frag:
1. mm/page_alloc.c: net stack seems to be using it in the
rx part with 'struct page_frag_cache' and the main API
being page_frag_alloc_align().
2. net/core/sock.c: net stack seems to be using it in the
tx part with 'struct page_frag' and the main API being
skb_page_frag_refill().
This patchset tries to unfiy the page frag implementation
by replacing page_frag with page_frag_cache for sk_page_frag()
first. net_high_order_alloc_disable_key for the implementation
in net/core/sock.c doesn't seems matter that much now as pcp
is also supported for high-order pages:
commit 44042b449872 ("mm/page_alloc: allow high-order pages to
be stored on the per-cpu lists")
As the related change is mostly related to networking, so
targeting the net-next. And will try to replace the rest
of page_frag in the follow patchset.
After this patchset:
1. Unify the page frag implementation by taking the best out of
two the existing implementations: we are able to save some space
for the 'page_frag_cache' API user, and avoid 'get_page()' for
the old 'page_frag' API user.
2. Future bugfix and performance can be done in one place, hence
improving maintainability of page_frag's implementation.
Kernel Image changing:
Linux Kernel total | text data bss
------------------------------------------------------
after 45250307 | 2727427917209996 766032
before 45254134 | 2727811817209984 766032
delta -3827 | -3839 +12 +0
Yunsheng Lin [Mon, 28 Oct 2024 11:53:42 +0000 (19:53 +0800)]
mm: page_frag: use __alloc_pages() to replace alloc_pages_node()
It seems there is about 24Bytes binary size increase for
__page_frag_cache_refill() after refactoring in arm64 system
with 64K PAGE_SIZE. By doing the gdb disassembling, It seems
we can have more than 100Bytes decrease for the binary size
by using __alloc_pages() to replace alloc_pages_node(), as
there seems to be some unnecessary checking for nid being
NUMA_NO_NODE, especially when page_frag is part of the mm
system.
Yunsheng Lin [Mon, 28 Oct 2024 11:53:41 +0000 (19:53 +0800)]
mm: page_frag: reuse existing space for 'size' and 'pfmemalloc'
Currently there is one 'struct page_frag' for every 'struct
sock' and 'struct task_struct', we are about to replace the
'struct page_frag' with 'struct page_frag_cache' for them.
Before begin the replacing, we need to ensure the size of
'struct page_frag_cache' is not bigger than the size of
'struct page_frag', as there may be tens of thousands of
'struct sock' and 'struct task_struct' instances in the
system.
By or'ing the page order & pfmemalloc with lower bits of
'va' instead of using 'u16' or 'u32' for page size and 'u8'
for pfmemalloc, we are able to avoid 3 or 5 bytes space waste.
And page address & pfmemalloc & order is unchanged for the
same page in the same 'page_frag_cache' instance, it makes
sense to fit them together.
After this patch, the size of 'struct page_frag_cache' should be
the same as the size of 'struct page_frag'.
Yunsheng Lin [Mon, 28 Oct 2024 11:53:40 +0000 (19:53 +0800)]
xtensa: remove the get_order() implementation
As the get_order() implemented by xtensa supporting 'nsau'
instruction seems be the same as the generic implementation
in include/asm-generic/getorder.h when size is not a constant
value as the generic implementation calling the fls*() is also
utilizing the 'nsau' instruction for xtensa.
So remove the get_order() implemented by xtensa, as using the
generic implementation may enable the compiler to do the
computing when size is a constant value instead of runtime
computing and enable the using of get_order() in BUILD_BUG_ON()
macro in next patch.
Yunsheng Lin [Mon, 28 Oct 2024 11:53:38 +0000 (19:53 +0800)]
mm: page_frag: use initial zero offset for page_frag_alloc_align()
We are about to use page_frag_alloc_*() API to not just
allocate memory for skb->data, but also use them to do
the memory allocation for skb frag too. Currently the
implementation of page_frag in mm subsystem is running
the offset as a countdown rather than count-up value,
there may have several advantages to that as mentioned
in [1], but it may have some disadvantages, for example,
it may disable skb frag coalescing and more correct cache
prefetching
We have a trade-off to make in order to have a unified
implementation and API for page_frag, so use a initial zero
offset in this patch, and the following patch will try to
make some optimization to avoid the disadvantages as much
as possible.
Yunsheng Lin [Mon, 28 Oct 2024 11:53:37 +0000 (19:53 +0800)]
mm: move the page fragment allocator from page_alloc into its own file
Inspired by [1], move the page fragment allocator from page_alloc
into its own c file and header file, as we are about to make more
change for it to replace another page_frag implementation in
sock.c
As this patchset is going to replace 'struct page_frag' with
'struct page_frag_cache' in sched.h, including page_frag_cache.h
in sched.h has a compiler error caused by interdependence between
mm_types.h and mm.h for asm-offsets.c, see [2]. So avoid the compiler
error by moving 'struct page_frag_cache' to mm_types_task.h as
suggested by Alexander, see [3].
Yunsheng Lin [Mon, 28 Oct 2024 11:53:36 +0000 (19:53 +0800)]
mm: page_frag: add a test module for page_frag
The testing is done by ensuring that the fragment allocated
from a frag_frag_cache instance is pushed into a ptr_ring
instance in a kthread binded to a specified cpu, and a kthread
binded to a specified cpu will pop the fragment from the
ptr_ring and free the fragment.
Johannes Berg [Fri, 8 Nov 2024 10:41:45 +0000 (11:41 +0100)]
net: convert to nla_get_*_default()
Most of the original conversion is from the spatch below,
but I edited some and left out other instances that were
either buggy after conversion (where default values don't
fit into the type) or just looked strange.
Ido Schimmel [Tue, 5 Nov 2024 13:39:54 +0000 (15:39 +0200)]
bridge: Allow deleting FDB entries with non-existent VLAN
It is currently impossible to delete individual FDB entries (as opposed
to flushing) that were added with a VLAN that no longer exists:
# ip link add name dummy1 up type dummy
# ip link add name br1 up type bridge vlan_filtering 1
# ip link set dev dummy1 master br1
# bridge fdb add 00:11:22:33:44:55 dev dummy1 master static vlan 1
# bridge vlan del vid 1 dev dummy1
# bridge fdb get 00:11:22:33:44:55 br br1 vlan 1
00:11:22:33:44:55 dev dummy1 vlan 1 master br1 static
# bridge fdb del 00:11:22:33:44:55 dev dummy1 master vlan 1
RTNETLINK answers: Invalid argument
# bridge fdb get 00:11:22:33:44:55 br br1 vlan 1
00:11:22:33:44:55 dev dummy1 vlan 1 master br1 static
This is in contrast to MDB entries that can be deleted after the VLAN
was deleted:
# bridge vlan add vid 10 dev dummy1
# bridge mdb add dev br1 port dummy1 grp 239.1.1.1 permanent vid 10
# bridge vlan del vid 10 dev dummy1
# bridge mdb get dev br1 grp 239.1.1.1 vid 10
dev br1 port dummy1 grp 239.1.1.1 permanent vid 10
# bridge mdb del dev br1 port dummy1 grp 239.1.1.1 permanent vid 10
# bridge mdb get dev br1 grp 239.1.1.1 vid 10
Error: bridge: MDB entry not found.
Align the two interfaces and allow user space to delete FDB entries that
were added with a VLAN that no longer exists:
# ip link add name dummy1 up type dummy
# ip link add name br1 up type bridge vlan_filtering 1
# ip link set dev dummy1 master br1
# bridge fdb add 00:11:22:33:44:55 dev dummy1 master static vlan 1
# bridge vlan del vid 1 dev dummy1
# bridge fdb get 00:11:22:33:44:55 br br1 vlan 1
00:11:22:33:44:55 dev dummy1 vlan 1 master br1 static
# bridge fdb del 00:11:22:33:44:55 dev dummy1 master vlan 1
# bridge fdb get 00:11:22:33:44:55 br br1 vlan 1
Error: Fdb entry not found.
Add a selftest to make sure this behavior does not regress:
# ./rtnetlink.sh -t kci_test_fdb_del
PASS: bridge fdb del
mlx5/core: Schedule EQ comp tasklet only if necessary
Currently, the mlx5_eq_comp_int() interrupt handler schedules a tasklet
to call mlx5_cq_tasklet_cb() if it processes any completions. For CQs
whose completions don't need to be processed in tasklet context, this
adds unnecessary overhead. In a heavy TCP workload, we see 4% of CPU
time spent on the tasklet_trylock() in tasklet_action_common(), with a
smaller amount spent on the atomic operations in tasklet_schedule(),
tasklet_clear_sched(), and locking the spinlock in mlx5_cq_tasklet_cb().
TCP completions are handled by mlx5e_completion_event(), which schedules
NAPI to poll the queue, so they don't need tasklet processing.
Schedule the tasklet in mlx5_add_cq_to_tasklet() instead to avoid this
overhead. mlx5_add_cq_to_tasklet() is responsible for enqueuing the CQs
to be processed in tasklet context, so it can schedule the tasklet. CQs
that need tasklet processing have their interrupt comp handler set to
mlx5_add_cq_to_tasklet(), so they will schedule the tasklet. CQs that
don't need tasklet processing won't schedule the tasklet. To avoid
scheduling the tasklet multiple times during the same interrupt, only
schedule the tasklet in mlx5_add_cq_to_tasklet() if the tasklet work
queue was empty before the new CQ was pushed to it.
The additional branch in mlx5_add_cq_to_tasklet(), called for each EQE,
may add a small cost for the userspace Infiniband CQs whose completions
are processed in tasklet context. But this seems worth it to avoid the
tasklet overhead for CQs that don't need it.
Note that the mlx4 driver works the same way: it schedules the tasklet
in mlx4_add_cq_to_tasklet() and only if the work queue was empty before.
This patchsets improves the performance of neigh_flush_dev.
Currently, the only way to implement it requires traversing
all neighbours known to the kernel, across all network-namespaces.
This means that some flows are slowed down as a function of neigh-scale,
even if the specific link they're handling has little to no neighbours.
In order to solve this, this patchset adds a netdev->neighbours list,
as well as making the original linked-list doubly-, so that it is
possible to unlink neighbours without traversing the hash-bucket to
obtain the previous neighbour.
The original use-case we encountered was mass-deletion of links (12K
VLANs) while there are 50K ARPs and 50K NDPs in the system; though the
slowdowns would also appear when the links are set down.
====================
Heiner Kallweit [Wed, 6 Nov 2024 16:56:28 +0000 (17:56 +0100)]
r8169: improve rtl_set_d3_pll_down
Make use of new helper r8169_mod_reg8_cond() and move from a switch()
to an if() clause. Benefit is that we don't have to touch this piece of
code each time support for a new chip version is added.
Hyunwoo Kim [Wed, 6 Nov 2024 09:36:04 +0000 (04:36 -0500)]
hv_sock: Initializing vsk->trans to NULL to prevent a dangling pointer
When hvs is released, there is a possibility that vsk->trans may not
be initialized to NULL, which could lead to a dangling pointer.
This issue is resolved by initializing vsk->trans to NULL.
Khang Nguyen [Tue, 5 Nov 2024 07:19:15 +0000 (14:19 +0700)]
net: mctp: Expose transport binding identifier via IFLA attribute
MCTP control protocol implementations are transport binding dependent.
Endpoint discovery is mandatory based on transport binding.
Message timing requirements are specified in each respective transport
binding specification.
However, we currently have no means to get this information from MCTP
links.
Add a IFLA_MCTP_PHYS_BINDING netlink link attribute, which represents
the transport type using the DMTF DSP0239-defined type numbers, returned
as part of RTM_GETLINK data.
We get an IFLA_MCTP_PHYS_BINDING attribute for each MCTP link, for
example:
- 0x00 (unspec) for loopback interface;
- 0x01 (SMBus/I2C) for mctpi2c%d interfaces; and
- 0x05 (serial) for mctpserial%d interfaces.
Guillaume Nault [Wed, 6 Nov 2024 21:37:32 +0000 (22:37 +0100)]
ipv4: Prepare ip_route_output() to future .flowi4_tos conversion.
Convert the "tos" parameter of ip_route_output() to dscp_t. This way
we'll have a dscp_t value directly available when .flowi4_tos will
eventually be converted to dscp_t.
All ip_route_output() callers but one set this "tos" parameter to 0 and
therefore don't need to be adapted to the new prototype.
Only br_nf_pre_routing_finish() needs conversion. It can just use
ip4h_dscp() to get the DSCP field from the IPv4 header.
Heiner Kallweit [Wed, 6 Nov 2024 20:24:18 +0000 (21:24 +0100)]
net: phy: broadcom: use genphy_c45_an_config_eee_aneg in bcm_config_lre_aneg
bcm_config_lre_aneg() is the only user of genphy_config_eee_advert(),
therefore use genphy_c45_an_config_eee_aneg() instead. The resulting
functionality is equivalent, and bcm_config_lre_aneg() follows the
structure of __genphy_config_aneg().
In a follow-up step genphy_config_eee_advert() can be removed.
Note: We preserve the current behavior to ignore errors.
Cross-merge networking fixes after downstream PR (net-6.12-rc7).
Conflicts:
drivers/net/ethernet/freescale/enetc/enetc_pf.c e15c5506dd39 ("net: enetc: allocate vf_state during PF probes") 3774409fd4c6 ("net: enetc: build enetc_pf_common.c as a separate module")
https://lore.kernel.org/20241105114100.118bd35e@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/ti/am65-cpsw-nuss.c de794169cf17 ("net: ethernet: ti: am65-cpsw: Fix multi queue Rx on J7") 4a7b2ba94a59 ("net: ethernet: ti: am65-cpsw: Use tstats instead of open coded version")
- can: mcp251xfd: mcp251xfd_ring_alloc(): fix coalescing
configuration when switching CAN modes
Misc:
- revert earlier hns3 fixes, they were ignoring IOMMU abstractions
and need to be reworked
- can: {cc770,sja1000}_isa: allow building on x86_64"
* tag 'net-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (42 commits)
drivers: net: ionic: add missed debugfs cleanup to ionic_probe() error path
net/smc: do not leave a dangling sk pointer in __smc_create()
rxrpc: Fix missing locking causing hanging calls
net/smc: Fix lookup of netdev by using ib_device_get_netdev()
net: arc: rockchip: fix emac mdio node support
net: arc: fix the device for dma_map_single/dma_unmap_single
virtio_net: Update rss when set queue
virtio_net: Sync rss config to device when virtnet_probe
virtio_net: Add hash_key_length check
virtio_net: Support dynamic rss indirection table size
netfilter: nf_tables: wait for rcu grace period on net_device removal
net: stmmac: Fix unbalanced IRQ wake disable warning on single irq case
net: vertexcom: mse102x: Fix possible double free of TX skb
mptcp: use sock_kfree_s instead of kfree
mptcp: no admin perm to list endpoints
net: phy: ti: add PHY_RST_AFTER_CLK_EN flag
net: ethernet: ti: am65-cpsw: fix warning in am65_cpsw_nuss_remove_rx_chns()
net: ethernet: ti: am65-cpsw: Fix multi queue Rx on J7
net: hns3: fix kernel crash when uninstalling driver
Revert "Merge branch 'there-are-some-bugfix-for-the-hns3-ethernet-driver'"
...
The ionic_setup_one() creates a debugfs entry for ionic upon
successful execution. However, the ionic_probe() does not
release the dentry before returning, resulting in a memory
leak.
To fix this bug, we add the ionic_debugfs_del_dev() to release
the resources in a timely manner before returning.
David Howells [Wed, 6 Nov 2024 13:03:22 +0000 (13:03 +0000)]
rxrpc: Fix missing locking causing hanging calls
If a call gets aborted (e.g. because kafs saw a signal) between it being
queued for connection and the I/O thread picking up the call, the abort
will be prioritised over the connection and it will be removed from
local->new_client_calls by rxrpc_disconnect_client_call() without a lock
being held. This may cause other calls on the list to disappear if a race
occurs.
Fix this by taking the client_call_lock when removing a call from whatever
list its ->wait_link happens to be on.
Wenjia Zhang [Wed, 6 Nov 2024 08:26:12 +0000 (09:26 +0100)]
net/smc: Fix lookup of netdev by using ib_device_get_netdev()
The SMC-R variant of the SMC protocol used direct call to function
ib_device_ops.get_netdev() to lookup netdev. As we used mlx5 device
driver to run SMC-R, it failed to find a device, because in mlx5_ib the
internal net device management for retrieving net devices was replaced
by a common interface ib_device_get_netdev() in commit 8d159eb2117b
("RDMA/mlx5: Use IB set_netdev and get_netdev functions").
Since such direct accesses to the internal net device management is not
recommended at all, update the SMC-R code to use proper API
ib_device_get_netdev().
Linus Torvalds [Thu, 7 Nov 2024 17:41:34 +0000 (07:41 -1000)]
Merge tag 'pwm/for-6.12-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fix from Uwe Kleine-König:
"Fix period setting in imx-tpm driver and a maintainer update
Erik Schumacher found and fixed a problem in the calculation of the
PWM period setting yielding too long periods. Trevor Gamblin - who
already cared about mainlining the pwm-axi-pwmgen driver - stepped
forward as an additional reviewer.
Thanks to Erik and Trevor"
* tag 'pwm/for-6.12-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
MAINTAINERS: add self as reviewer for AXI PWM GENERATOR
pwm: imx-tpm: Use correct MODULO value for EPWM mode
David Wang [Wed, 6 Nov 2024 02:12:28 +0000 (10:12 +0800)]
proc/softirqs: replace seq_printf with seq_put_decimal_ull_width
seq_printf is costy, on a system with n CPUs, reading /proc/softirqs
would yield 10*n decimal values, and the extra cost parsing format string
grows linearly with number of cpus. Replace seq_printf with
seq_put_decimal_ull_width have significant performance improvement.
On an 8CPUs system, reading /proc/softirqs show ~40% performance
gain with this patch.
Jakub Kicinski [Thu, 7 Nov 2024 16:16:42 +0000 (08:16 -0800)]
Merge tag 'nf-24-11-07' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fix for net
The following series contains a Netfilter fix:
1) Wait for rcu grace period after netdevice removal is reported via event.
* tag 'nf-24-11-07' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: wait for rcu grace period on net_device removal
====================
Gilad Naaman [Mon, 4 Nov 2024 08:35:44 +0000 (08:35 +0000)]
sctp: Avoid enqueuing addr events redundantly
Avoid modifying or enqueuing new events if it's possible to tell that no
one will consume them.
Since enqueueing requires searching the current queue for opposite
events for the same address, adding addresses en-masse turns this
inetaddr_event into a bottle-neck, as it will get slower and slower
with each address added.
Paolo Abeni [Thu, 7 Nov 2024 12:39:43 +0000 (13:39 +0100)]
Merge branch 'fix-the-arc-emac-driver'
Andy Yan says:
====================
Fix the arc emac driver
The arc emac driver was broken for a long time,
The first broken happens when a dma releated fix introduced in Linux 5.10.
The second broken happens when a emac device tree node restyle introduced
in Linux 6.1.
These two patches are try to make the arc emac work again.
Changes in v2:
- Add cover letter.
- Add fix tag.
- Add more detail explaination.
====================
projects / linux.git / log