Jakub Kicinski [Sun, 9 Jan 2022 22:14:08 +0000 (14:14 -0800)]
Merge tag 'for-net-next-2022-01-07' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- Add support for Foxconn QCA 0xe0d0
- Fix HCI init sequence on MacBook Air 8,1 and 8,2
- Fix Intel firmware loading on legacy ROM devices
* tag 'for-net-next-2022-01-07' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next:
Bluetooth: hci_sock: fix endian bug in hci_sock_setsockopt()
Bluetooth: L2CAP: uninitialized variables in l2cap_sock_setsockopt()
Bluetooth: btqca: sequential validation
Bluetooth: btusb: Add support for Foxconn QCA 0xe0d0
Bluetooth: btintel: Fix broken LED quirk for legacy ROM devices
Bluetooth: hci_event: Rework hci_inquiry_result_with_rssi_evt
Bluetooth: btbcm: disable read tx power for MacBook Air 8,1 and 8,2
Bluetooth: hci_qca: Fix NULL vs IS_ERR_OR_NULL check in qca_serdev_probe
Bluetooth: hci_bcm: Check for error irq
====================
Jakub Kicinski [Sun, 9 Jan 2022 22:00:49 +0000 (14:00 -0800)]
Merge tag 'linux-can-fixes-for-5.16-20220109' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2022-01-09
The first patch is by Johan Hovold and fixes a mem leak in the error
path of the softing_cs driver.
The next patch is by me and fixes a set but not used variable warning
in the softing driver.
Jiasheng Jiang's patch for the xilinx_can driver adds the missing
error checking when getting the IRQ.
Lad Prabhakar contributes a patch for the rcar_canfd driver to fix a
mem leak in the error path.
The last patch is by Brian Silverman and properly initializes the send
USB messages to avoid spurious CAN error frames.
* tag 'linux-can-fixes-for-5.16-20220109' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: gs_usb: gs_can_start_xmit(): zero-initialize hf->{flags,reserved}
can: rcar_canfd: rcar_canfd_channel_probe(): make sure we free CAN network device
can: xilinx_can: xcan_probe(): check for error irq
can: softing: softing_startstop(): fix set but not used variable warning
can: softing_cs: softingcs_probe(): fix memleak on registration failure
====================
Linus Torvalds [Sun, 9 Jan 2022 18:49:12 +0000 (10:49 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fix from Dmitry Torokhov:
"A small fixup to the Zinitix touchscreen driver to avoid enabling the
IRQ line before we successfully requested it"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: zinitix - make sure the IRQ is allocated before it gets enabled
Linus Torvalds [Sun, 9 Jan 2022 18:43:16 +0000 (10:43 -0800)]
Merge tag 'soc-fixes-5.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fix from Olof Johansson:
"One more fix for 5.16
I had missed one patch when I sent up what I thought was the last
batch of fixes for this release. This one fixes issues on the
Raspberry Pi platforms due to gpio init changes this release, so
hopefully we can get it merged before final release is cut"
* tag 'soc-fixes-5.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: gpio-ranges property is now required
Linus Torvalds [Sun, 9 Jan 2022 18:37:07 +0000 (10:37 -0800)]
Merge tag 'perf-tools-fixes-for-v5.16-2022-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Revert "libtraceevent: Increase libtraceevent logging when verbose",
breaks the build with libtraceevent-1.3.0, i.e. when building with
'LIBTRACEEVENT_DYNAMIC=1'.
- Avoid early exit in 'perf trace' due to running SIGCHLD handler
before it makes sense to. It can happen when using a BPF source code
event that have to be first built into an object file.
* tag 'perf-tools-fixes-for-v5.16-2022-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
Revert "libtraceevent: Increase libtraceevent logging when verbose"
perf trace: Avoid early exit due to running SIGCHLD handler before it makes sense to
this is a pull request of 22 patches for net-next/master.
The first patch is by Tom Rix and fixes an uninitialized variable in
the janz-ican3 driver (introduced in linux-can-next-for-5.17-20220105).
The next 13 patches are by my and target the mcp251xfd driver. First
several cleanup patches, then the driver is prepared for the upcoming
ethtool ring parameter and IRQ coalescing support, which is added in a
later pull request.
The remaining 8 patches are by Dario Binacchi and me and enhance the
flexcan driver. The driver is moved into a sub directory. An ethtool
private flag is added to optionally disable CAN RTR frame reception,
to make use of more RX buffers. The resulting RX buffer configuration
can be read by ethtool ring parameter support. Finally documentation
for the ethtool private flag is added to the
Documentation/networking/device_drivers/can directory.
====================
No information is deliberately sent in hf->flags in host -> device
communications, but the open-source candleLight firmware echoes it
back, which can result in the GS_CAN_FLAG_OVERFLOW flag being set and
generating spurious ERRORFRAMEs.
While there also initialize the reserved member with 0.
Lad Prabhakar [Thu, 6 Jan 2022 11:48:00 +0000 (11:48 +0000)]
can: rcar_canfd: rcar_canfd_channel_probe(): make sure we free CAN network device
Make sure we free CAN network device in the error path. There are
several jumps to fail label after allocating the CAN network device
successfully. This patch places the free_candev() under fail label so
that in failure path a jump to fail label frees the CAN network
device.
Jiasheng Jiang [Fri, 24 Dec 2021 02:13:24 +0000 (10:13 +0800)]
can: xilinx_can: xcan_probe(): check for error irq
For the possible failure of the platform_get_irq(), the returned irq
could be error number and will finally cause the failure of the
request_irq().
Consider that platform_get_irq() can now in certain cases return
-EPROBE_DEFER, and the consequences of letting request_irq()
effectively convert that into -EINVAL, even at probe time rather than
later on. So it might be better to check just now.
can: softing: softing_startstop(): fix set but not used variable warning
In the function softing_startstop() the variable error_reporting is
assigned but not used. The code that uses this variable is commented
out. Its stated that the functionality is not finally verified.
To fix the warning:
| drivers/net/can/softing/softing_fw.c:424:9: error: variable 'error_reporting' set but not used [-Werror,-Wunused-but-set-variable]
remove the comment, activate the code, but add a "0 &&" to the if
expression and rely on the optimizer rather than the preprocessor to
remove the code.
Nikita Travkin [Sun, 9 Jan 2022 07:19:19 +0000 (23:19 -0800)]
Input: zinitix - make sure the IRQ is allocated before it gets enabled
Since irq request is the last thing in the driver probe, it happens
later than the input device registration. This means that there is a
small time window where if the open method is called the driver will
attempt to enable not yet available irq.
Fix that by moving the irq request before the input device registration.
Johan Hovold [Wed, 22 Dec 2021 10:48:43 +0000 (11:48 +0100)]
can: softing_cs: softingcs_probe(): fix memleak on registration failure
In case device registration fails during probe, the driver state and
the embedded platform device structure needs to be freed using
platform_device_put() to properly free all resources (e.g. the device
name).
Phil Elwell [Tue, 4 Jan 2022 17:02:47 +0000 (18:02 +0100)]
ARM: dts: gpio-ranges property is now required
Since [1], added in 5.7, the absence of a gpio-ranges property has
prevented GPIOs from being restored to inputs when released.
Add those properties for BCM283x and BCM2711 devices.
[1] commit 2ab73c6d8323 ("gpio: Support GPIO controllers without
pin-ranges")
Dario Binacchi [Sat, 8 Jan 2022 18:16:33 +0000 (19:16 +0100)]
can: flexcan: add ethtool support to get rx/tx ring parameters
This patch adds ethtool support to get the number of message buffers
configured for reception/transmission, which may also depends on
runtime configurations such as the 'rx-rtr' flag state.
can: flexcan: add ethtool support to change rx-rtr setting during runtime
This patch adds a private flag to the flexcan driver to switch the
"rx-rtr" setting on and off.
"rx-rtr" on - Receive RTR frames. (default)
The CAN controller can and will receive RTR frames.
On some IP cores the controller cannot receive RTR
frames in the more performant "RX mailbox" mode and
will use "RX FIFO" mode instead.
"rx-rtr" off - Waive ability to receive RTR frames. (not supported on all IP cores)
This mode activates the "RX mailbox mode" for better
performance, on some IP cores RTR frames cannot be
received anymore.
The "RX FIFO" mode uses a FIFO with a depth of 6 CAN frames.
The "RX mailbox" mode uses up to 62 mailboxes.
Linus Torvalds [Sat, 8 Jan 2022 20:12:58 +0000 (12:12 -0800)]
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Fix the regression with AMD GPU suspend by reverting the
handling of bus regulators in the I2C core.
Also, there is a fix for the MPC driver to prevent an
out-of-bound-access"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Revert "i2c: core: support bus regulator controlling in adapter"
i2c: mpc: Avoid out of bounds memory access
Linus Torvalds [Sat, 8 Jan 2022 19:39:53 +0000 (11:39 -0800)]
Merge tag 'for-v5.16-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fixes from Sebastian Reichel:
"Three fixes for the 5.16 cycle:
- Avoid going beyond last capacity in the power-supply core
- Replace 1E6L with NSEC_PER_MSEC to avoid floating point calculation
in LLVM resulting in a build failure
- Fix ADC measurements in bq25890 charger driver"
* tag 'for-v5.16-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: reset: ltc2952: Fix use of floating point literals
power: bq25890: Enable continuous conversion for ADC at charging
power: supply: core: Break capacity loop
can: flexcan: add more quirks to describe RX path capabilities
Most flexcan IP cores support 2 RX modes:
- FIFO
- mailbox
Some IP core versions cannot receive CAN RTR messages via mailboxes.
This patch adds quirks to document this.
This information will be used in a later patch to switch from FIFO to
more performant mailbox mode at the expense of losing the ability to
receive RTR messages. This trade off is beneficial in certain use
cases.
Most flexcan IP cores support 2 RX modes:
- FIFO
- mailbox
The names for these modes were chosen to reflect the name of the
rx-offload mode they are using.
The name of the RX modes should better reflect their difference with
regards the flexcan IP core. So this patch renames the various
occurrences of OFF_FIFO to RX_FIFO and OFF_TIMESTAMP to RX_MAILBOX:
can: mcp251xfd: mcp251xfd.h: sort function prototypes
The .c files in the Makefile are ordered alphabetically. This patch
groups the function prototypes by their corresponding .c file and
brings the into the same order.
A RX overflow usually happens during high system load. Printing
overflow messages to the kernel log, which on embedded systems often
is outputted on the serial console, even increases the system load.
To decrease the system load in these situations, denote the messages
to debug level and wrap them with net_ratelimit().
can: mcp251xfd: mcp251xfd_open(): make use of pm_runtime_resume_and_get()
With patch
| dd8088d5a896 PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter
the usual pm_runtime_get_sync() and pm_runtime_put_noidle()
in-case-of-error dance is no longer needed. Convert the mcp251xfd
driver to use this function.
can: mcp251xfd: mcp251xfd_open(): open_candev() first
This patch exchanges the order of open_candev() and
pm_runtime_get_sync(), so that open_candev() is called first.
A usual reason why open_candev() fails is missing CAN bit rate
configuration. It makes no sense to resume the device from PM sleep
first just to put it to sleep if the bit rate is not configured.
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the s390 dasd sysfs code to use default_groups field
which has been the preferred way since commit aa30f47cf666 ("kobject:
Add support for default attribute groups to kobj_type") so that we can
soon get rid of the obsolete default_attrs field.
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the sclp_sd sysfs code to use default_groups field which
has been the preferred way since commit aa30f47cf666 ("kobject: Add
support for default attribute groups to kobj_type") so that we can
soon get rid of the obsolete default_attrs field.
====================
ENA: capabilities field and cosmetic changes
Add a new capabilities bitmask field to get indication of
capabilities supported by the device. Use the capabilities
field to query the device for ENI stats support.
Other patches are cosmetic changes like fixing readme
mistakes, removing unused variables etc...
====================
This struct was used to pass data from callee function to its caller.
Its usage can be avoided.
Removing it results in less code without any damage to code readability.
Also it allows to consolidate ring size calculation into a single
function (ena_calc_io_queue_size()).
net: ena: Change ENI stats support check to use capabilities field
Use the capabilities field to query the device for ENI stats
support.
This replaces the previous method that tried to get the ENI stats
during ena_probe() and used the success or failure as an indication
for support by the device.
Remove eni_stats_supported field from struct ena_adapter. This field
was used for the previous method of queriying for ENI stats support.
Change the severity level of the print in case of
ena_com_get_eni_stats() failure from info to error.
With the previous method of querying form ENI stats support, failure
to get ENI stats was normal for devices that don't support it.
With the use of the capabilities field such a failure is unexpected,
as it is called only if the device reported that it supports ENI
stats.
net: ena: Add capabilities field with support for ENI stats capability
This bitmask field indicates what capabilities are supported by the
device.
The capabilities field differs from the 'supported_features' field which
indicates what sub-commands for the set/get feature commands are
supported. The sub-commands are specified in the 'feature_id' field of
the 'ena_admin_set_feat_cmd' struct in the following way:
The 'capabilities' field, on the other hand, specifies different
capabilities of the device. For example, whether the device supports
querying of ENI stats.
Also add an enumerator which contains all the capabilities. The
first added capability macro is for ENI stats feature.
Capabilities are queried along with the other device attributes (in
ena_com_get_dev_attr_feat()) during device initialization and are stored
in the ena_com_dev struct. They can be later queried using the
ena_com_get_cap() helper function.
Eric Dumazet [Fri, 7 Jan 2022 18:39:53 +0000 (10:39 -0800)]
af_packet: fix tracking issues in packet_do_bind()
It appears that my changes in packet_do_bind() were
slightly wrong.
syzbot found that calling bind() twice would trigger
a false positive.
Remove proto_curr/dev_curr variables and rewrite things
to be less confusing (like not having to use netdev_tracker_alloc(),
and instead use the standard dev_hold_track())
====================
mptcp: Refactoring for one selftest and csum validation
Patch 1 changes the MPTCP join self tests to depend more on events
rather than delays, so the script runs faster and has more consistent
results.
Patches 2 and 3 get rid of some duplicate code in MPTCP's checksum
validation by modifying and leveraging an existing helper function.
====================
Vladimir Oltean [Fri, 7 Jan 2022 14:42:29 +0000 (16:42 +0200)]
net: dsa: felix: add port fast age support
Add support for flushing the MAC table on a given port in the ocelot
switch library, and use this functionality in the felix DSA driver.
This operation is needed when a port leaves a bridge to become
standalone, and when the learning is disabled, and when the STP state
changes to a state where no FDB entry should be present.
Vladimir Oltean [Fri, 7 Jan 2022 16:43:32 +0000 (18:43 +0200)]
net: mscc: ocelot: fix incorrect balancing with down LAG ports
Assuming the test setup described here:
https://patchwork.kernel.org/project/netdevbpf/cover/20210205130240.4072854[email protected]/
(swp1 and swp2 are in bond0, and bond0 is in a bridge with swp0)
it can be seen that when swp1 goes down (on either board A or B), then
traffic that should go through that port isn't forwarded anywhere.
In other words, in the "bad" configuration, the attempt is to remove the
inactive swp1 from the destination ports via PGID_DST. But when a MAC
table entry is learned, it is learned towards PGID_DST 1, because that
is the logical port id of the LAG itself (it is equal to the lowest
numbered member port). So when swp1 becomes inactive, if we set
PGID_DST[1] to contain just swp1 and not swp2, the packet will not have
any chance to reach the destination via swp2.
The "correct" way to remove swp1 as a destination is via PGID_AGGR
(remove swp1 from the aggregation port groups for all aggregation
codes). This means that PGID_DST[1] and PGID_DST[2] must still contain
both swp1 and swp2. This makes the MAC table still treat packets
destined towards the single-port LAG as "multicast", and the inactive
ports are removed via the aggregation code tables.
The change presented here is a design one: the ocelot_get_bond_mask()
function used to take an "only_active_ports" argument. We don't need
that. The only call site that specifies only_active_ports=true,
ocelot_set_aggr_pgids(), must retrieve the entire bonding mask, because
it must program that into PGID_DST. Additionally, it must also clear the
inactive ports from the bond mask here, which it can't do if bond_mask
just contains the active ports:
ac = ocelot_read_rix(ocelot, ANA_PGID_PGID, i);
ac &= ~bond_mask; <---- here
/* Don't do division by zero if there was no active
* port. Just make all aggregation codes zero.
*/
if (num_active_ports)
ac |= BIT(aggr_idx[i % num_active_ports]);
ocelot_write_rix(ocelot, ac, ANA_PGID_PGID, i);
So it becomes the responsibility of ocelot_set_aggr_pgids() to take
ocelot_port->lag_tx_active into consideration when populating the
aggr_idx array.
Jakub Kicinski [Sat, 8 Jan 2022 02:51:46 +0000 (18:51 -0800)]
Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
40GbE Intel Wired LAN Driver Updates 2022-01-07
This series contains updates to i40e and iavf drivers.
Karen limits per VF MAC filters so that one VF does not consume all
filters for i40e.
Jedrzej reduces busy wait time for admin queue calls for i40e.
Mateusz updates firmware versions to reflect new supported NVM images
and renames an error to remove non-inclusive language for i40e.
Yang Li fixes a set but not used warning for i40e.
Jason Wang removes an unneeded variable for iavf.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
iavf: remove an unneeded variable
i40e: remove variables set but not used
i40e: Remove non-inclusive language
i40e: Update FW API version
i40e: Minimize amount of busy-waiting during AQ send
i40e: Add ensurance of MacVlan resources for every trusted VF
====================
Gal Pressman [Sun, 2 Jan 2022 08:12:53 +0000 (10:12 +0200)]
net/tls: Fix skb memory leak when running kTLS traffic
The cited Fixes commit introduced a memory leak when running kTLS
traffic (with/without hardware offloads).
I'm running nginx on the server side and wrk on the client side and get
the following:
I'm not familiar with these areas of the code, but I've added this
sk_defer_free_flush() to tls_sw_recvmsg() based on a hunch and it
resolved the issue.
Linus Torvalds [Fri, 7 Jan 2022 23:58:06 +0000 (15:58 -0800)]
Merge branch 'for-5.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
"This contains the cgroup.procs permission check fixes so that they use
the credentials at the time of open rather than write, which also
fixes the cgroup namespace lifetime bug"
* 'for-5.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
selftests: cgroup: Test open-time cgroup namespace usage for migration checks
selftests: cgroup: Test open-time credential usage for migration checks
selftests: cgroup: Make cg_create() use 0755 for permission instead of 0644
cgroup: Use open-time cgroup namespace for process migration perm checks
cgroup: Allocate cgroup_file_ctx for kernfs_open_file->priv
cgroup: Use open-time credentials for process migraton perm checks
Wolfram Sang [Thu, 6 Jan 2022 12:24:52 +0000 (13:24 +0100)]
Revert "i2c: core: support bus regulator controlling in adapter"
This largely reverts commit 5a7b95fb993ec399c8a685552aa6a8fc995c40bd. It
breaks suspend with AMD GPUs, and we couldn't incrementally fix it. So,
let's remove the code and go back to the drawing board. We keep the
header extension to not break drivers already populating the regulator.
We expect to re-add the code handling it soon.
This breaks the build as it will prefer using libbpf-devel header files,
even when not using LIBBPF_DYNAMIC=1, breaking the build.
This was detected on OpenSuSE Tumbleweed with libtraceevent-devel 1.3.0,
as described by Jiri Slaby:
=======================================================================
It breaks build with LIBTRACEEVENT_DYNAMIC and version 1.3.0:
> util/debug.c: In function ‘perf_debug_option’:
> util/debug.c:243:17: error: implicit declaration of function
‘tep_set_loglevel’ [-Werror=implicit-function-declaration]
> 243 | tep_set_loglevel(TEP_LOG_INFO);
> | ^~~~~~~~~~~~~~~~
> util/debug.c:243:34: error: ‘TEP_LOG_INFO’ undeclared (first use in this
function); did you mean ‘TEP_PRINT_INFO’?
> 243 | tep_set_loglevel(TEP_LOG_INFO);
> | ^~~~~~~~~~~~
> | TEP_PRINT_INFO
> util/debug.c:243:34: note: each undeclared identifier is reported only once
for each function it appears in
> util/debug.c:245:34: error: ‘TEP_LOG_DEBUG’ undeclared (first use in this
function)
> 245 | tep_set_loglevel(TEP_LOG_DEBUG);
> | ^~~~~~~~~~~~~
> util/debug.c:247:34: error: ‘TEP_LOG_ALL’ undeclared (first use in this
function)
> 247 | tep_set_loglevel(TEP_LOG_ALL);
> | ^~~~~~~~~~~
It is because the gcc's command line looks like:
gcc
...
-I/home/abuild/rpmbuild/BUILD/tools/lib/
...
-DLIBTRACEEVENT_VERSION=65790
...
=======================================================================
The proper way to fix this is more involved and so not suitable for this
late in the 5.16-rc stage.
the event parsing eventually calls llvm__get_kbuild_opts() that runs a
script and that ends up with SIGCHLD delivered to the 'perf trace'
handler, which assumes the workload process is done and quits 'perf
trace'.
Move the SIGCHLD handler setup directly to trace__run(), where the event
is parsed and the object is already compiled.
Linus Torvalds [Fri, 7 Jan 2022 17:17:53 +0000 (09:17 -0800)]
Merge tag 'drm-fixes-2022-01-07' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"There is only the amdgpu runtime pm regression fix in here:
amdgpu:
- suspend/resume fix
- fix runtime PM regression"
* tag 'drm-fixes-2022-01-07' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: disable runpm if we are the primary adapter
fbdev: fbmem: add a helper to determine if an aperture is used by a fw fb
drm/amd/pm: keep the BACO feature enabled for suspend
Jason Wang [Sun, 12 Dec 2021 08:10:01 +0000 (16:10 +0800)]
iavf: remove an unneeded variable
The variable `ret_code' used for returning is never changed in function
`iavf_shutdown_adminq'. So that it can be removed and just return its
initial value 0 at the end of `iavf_shutdown_adminq' function.
Yang Li [Mon, 13 Dec 2021 03:11:07 +0000 (11:11 +0800)]
i40e: remove variables set but not used
The code that uses variables pe_cntx_size and pe_filt_size
has been removed, so they should be removed as well.
Eliminate the following clang warnings:
drivers/net/ethernet/intel/i40e/i40e_common.c:4139:20:
warning: variable 'pe_filt_size' set but not used.
drivers/net/ethernet/intel/i40e/i40e_common.c:4139:6:
warning: variable 'pe_cntx_size' set but not used.
i40e: Minimize amount of busy-waiting during AQ send
The i40e_asq_send_command will now use a non blocking usleep_range if
possible (non-atomic context), instead of busy-waiting udelay. The
usleep_range function uses hrtimers to provide better performance and
removes the negative impact of busy-waiting in time-critical
environments.
1. Rename i40e_asq_send_command to i40e_asq_send_command_atomic
and add 5th parameter to inform if called from an atomic context.
Call inside usleep_range (if non-atomic) or udelay (if atomic).
2. Change i40e_asq_send_command to invoke
i40e_asq_send_command_atomic(..., false).
3. Change two functions:
- i40e_aq_set_vsi_uc_promisc_on_vlan
- i40e_aq_set_vsi_mc_promisc_on_vlan
to explicitly use i40e_asq_send_command_atomic(..., true)
instead of i40e_asq_send_command, as they use spinlocks and do some
work in an atomic context.
All other calls to i40e_asq_send_command remain unchanged.
Karen Sornek [Thu, 17 Jun 2021 07:19:26 +0000 (09:19 +0200)]
i40e: Add ensurance of MacVlan resources for every trusted VF
Trusted VF can use up every resource available, leaving nothing
to other trusted VFs.
Introduce define, which calculates MacVlan resources available based
on maximum available MacVlan resources, bare minimum for each VF and
number of currently allocated VFs.
The sysfs output code accesses the sgx_numa_nodes[] array
unconditionally. However, this array is allocated during SGX
initialization, which only occurs on systems where SGX is
supported.
If the sysfs file is accessed on systems without SGX support,
sgx_numa_nodes[] is NULL and an oops occurs.
== Solution ==
To fix this, hide the entire nodeX/x86/ attribute group on
systems without SGX support using the ->is_visible attribute
group callback.
Unfortunately, SGX is initialized via a device_initcall() which
occurs _after_ the ->is_visible() callback. Instead of moving
SGX initialization earlier, call sysfs_update_group() during
SGX initialization to update the group visiblility.
This update requires moving the SGX sysfs code earlier in
sgx/main.c. There are no code changes other than the addition of
arch_update_sysfs_visibility() and a minor whitespace fixup to
arch_node_attr_is_visible() which checkpatch caught.
Kevin Bracey [Thu, 6 Jan 2022 21:56:37 +0000 (23:56 +0200)]
sch_cake: revise Diffserv docs
Documentation incorrectly stated that CS1 is equivalent to LE for
diffserv8. But when LE was added to the table, CS1 was pushed into tin
1, leaving only LE in tin 0.
Also "TOS1" no longer exists, as that is the same codepoint as LE.
Make other tweaks properly distinguishing codepoints from classes and
putting current Diffserve codepoints ahead of legacy ones.
Dan Carpenter [Fri, 7 Jan 2022 07:12:10 +0000 (10:12 +0300)]
netrom: fix api breakage in nr_setsockopt()
This needs to copy an unsigned int from user space instead of a long to
avoid breaking user space with an API change.
I have updated all the integer overflow checks from ULONG to UINT as
well. This is a slight API change but I do not expect it to affect
anything in real life.
Fixes: 3087a6f36ee0 ("netrom: fix copying in user data in nr_setsockopt") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Dan Carpenter [Fri, 7 Jan 2022 07:13:12 +0000 (10:13 +0300)]
ax25: uninitialized variable in ax25_setsockopt()
The "opt" variable is unsigned long but we only copy 4 bytes from
the user so the lower 4 bytes are uninitialized.
I have changed the integer overflow checks from ULONG to UINT as well.
This is a slight API change but I don't expect it to break anything.
Fixes: a7b75c5a8c41 ("net: pass a sockptr_t into ->setsockopt") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
David S. Miller [Fri, 7 Jan 2022 14:04:19 +0000 (14:04 +0000)]
Merge branch 'octeontx2-ptp-bugs'
Subbaraya Sundeep says:
====================
octeontx2: Fix PTP bugs
This patchset addresses two problems found when using
ptp.
Patch 1 - Increases the refcount of ptp device before use
which was missing and it lead to refcount increment after use
bug when module is loaded and unloaded couple of times.
Patch 2 - PTP resources allocated by VF are not being freed
during VF teardown. This patch fixes that.
====================
Before using the ptp pci device by AF driver increment
the reference count of it.
Fixes: a8b90c9d26d6 ("octeontx2-af: Add PTP device id for CN10K and 95O silcons") Signed-off-by: Subbaraya Sundeep <[email protected]> Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
David S. Miller [Fri, 7 Jan 2022 11:29:45 +0000 (11:29 +0000)]
Merge branch 'mptcp-fixes'
Mat Martineau says:
====================
mptcp: Fixes for buffer reclaim and option writing
Here are three fixes dealing with a syzkaller crash MPTCP triggers in
the memory manager in 5.16-rc8, and some option writing problems.
Patches 1 and 2 fix some corner cases in MPTCP option writing.
Patch 3 addresses a crash that syzkaller found a way to trigger in the mm
subsystem by passing an invalid value to __sk_mem_reduce_allocated().
====================
__mptcp_mem_reclaim_partial() could call __mptcp_rmem_reclaim() with a
negative value, which passed that negative value to
__sk_mem_reduce_allocated() and triggered the splat above.
Check for a reclaim amount that is positive and large enough for
__mptcp_rmem_reclaim() to actually adjust rmem_fwd_alloc (much like
the sk_mem_reclaim_partial() code the function is based on).
v2: Use '>' instead of '>=', since SK_MEM_QUANTUM - 1 would get
right-shifted into nothing by __mptcp_rmem_reclaim.
Fixes: 6511882cdd82 ("mptcp: allocate fwd memory separately on the rx and tx path") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/252 Reported-and-tested-by: [email protected] Cc: Andrew Morton <[email protected]> Cc: Michal Hocko <[email protected]> Acked-by: Paolo Abeni <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Geliang Tang [Thu, 6 Jan 2022 22:06:37 +0000 (14:06 -0800)]
mptcp: fix a DSS option writing error
'ptr += 1;' was omitted in the original code.
If the DSS is the last option -- which is what we have most of the
time -- that's not an issue. But it is if we need to send something else
after like a RM_ADDR or an MP_PRIO.
Matthieu Baerts [Thu, 6 Jan 2022 22:06:36 +0000 (14:06 -0800)]
mptcp: fix opt size when sending DSS + MP_FAIL
When these two options had to be sent -- which is not common -- the DSS
size was not being taken into account in the remaining size.
Additionally in this situation, the reported size was only the one of
the MP_FAIL which can cause issue if at the end, we need to write more
in the TCP options than previously said.
Here we use a dedicated variable for MP_FAIL size to keep the
WARN_ON_ONCE() just after.
David S. Miller [Fri, 7 Jan 2022 11:27:07 +0000 (11:27 +0000)]
Merge branch 'mptcp-next'
Mat Martineau says:
====================
mptcp: New features and cleanup
These patches have been tested in the MPTCP tree for a longer than usual
time (thanks to holiday schedules), and are ready for the net-next
branch. Changes include feature updates, small fixes, refactoring, and
some selftest changes.
Patch 1 fixes an OUTQ ioctl issue with TCP fallback sockets.
Patches 2, 3, and 6 add support of the MPTCP fastclose option (quick
shutdown of the full MPTCP connection, similar to TCP RST in regular
TCP), and a related self test.
Patch 4 cleans up some accept and poll code that is no longer needed
after the fastclose changes.
Patch 5 add userspace disconnect using AF_UNSPEC, which is used when
testing fastclose and makes the MPTCP socket's handling of AF_UNSPEC in
connect() more TCP-like.
Patches 7-11 refactor subflow creation to make better use of multiple
local endpoints and to better handle individual connection failures when
creating multiple subflows. Includes self test updates.
Patch 12 cleans up the way subflows are added to the MPTCP connection
list, eliminating the need for calls throughout the MPTCP code that had
to check the intermediate "join list" for entries to shift over to the
main "connection list".
Patch 13 refactors the MPTCP release_cb flags to use separate storage
for values only accessed with the socket lock held (no atomic ops
needed), and for values that need atomic operations.
====================
Paolo Abeni [Fri, 7 Jan 2022 00:20:26 +0000 (16:20 -0800)]
mptcp: avoid atomic bit manipulation when possible
Currently the msk->flags bitmask carries both state for the
mptcp_release_cb() - mostly touched under the mptcp data lock
- and others state info touched even outside such lock scope.
As a consequence, msk->flags is always manipulated with
atomic operations.
This change splits such bitmask in two separate fields, so
that we use plain bit operations when touching the
cb-related info.
The MPTCP_PUSH_PENDING bit needs additional care, as it is the
only CB related field currently accessed either under the mptcp
data lock or the mptcp socket lock.
Let's add another mask just for such bit's sake.
Paolo Abeni [Fri, 7 Jan 2022 00:20:25 +0000 (16:20 -0800)]
mptcp: cleanup MPJ subflow list handling
We can simplify the join list handling leveraging the
mptcp_release_cb(): if we can acquire the msk socket
lock at mptcp_finish_join time, move the new subflow
directly into the conn_list, otherwise place it on join_list and
let the release_cb process such list.
Since pending MPJ connection are now always processed
in a timely way, we can avoid flushing the join list
every time we have to process all the current subflows.
Additionally we can now use the mptcp data lock to protect
the join_list, removing the additional spin lock.
Finally, the MPJ handshake is now always finalized under the
msk socket lock, we can drop the additional synchronization
between mptcp_finish_join() and mptcp_close().
Paolo Abeni [Fri, 7 Jan 2022 00:20:24 +0000 (16:20 -0800)]
selftests: mptcp: add tests for subflow creation failure
Verify that, when multiple endpoints are available, subflows
creation proceed even when the first additional subflow creation
fails - due to packet drop on the relevant link
Paolo Abeni [Fri, 7 Jan 2022 00:20:23 +0000 (16:20 -0800)]
mptcp: do not block subflows creation on errors
If the MPTCP configuration allows for multiple subflows
creation, and the first additional subflows never reach
the fully established status - e.g. due to packets drop or
reset - the in kernel path manager do not move to the
next subflow.
This patch introduces a new PM helper to cope with MPJ
subflow creation failure and delay and hook it where appropriate.
Such helper triggers additional subflow creation, as needed
and updates the PM subflow counter, if the current one is
closing.
Additionally start all the needed additional subflows
as soon as the MPTCP socket is fully established, so we don't
have to cope with slow MPJ handshake blocking the next subflow
creation.
Paolo Abeni [Fri, 7 Jan 2022 00:20:22 +0000 (16:20 -0800)]
mptcp: keep track of local endpoint still available for each msk
Include into the path manager status a bitmap tracking the list
of local endpoints still available - not yet used - for the
relevant mptcp socket.
Keep such map updated at endpoint creation/deletion time, so
that we can easily skip already used endpoint at local address
selection time.
The endpoint used by the initial subflow is lazyly accounted at
subflow creation time: the usage bitmap is be up2date before
endpoint selection and we avoid such unneeded task in some relevant
scenarios - e.g. busy servers accepting incoming subflows but
not creating any additional ones nor annuncing additional addresses.
Overall this allows for fair local endpoints usage in case of
subflow failure.
As a side effect, this patch also enforces that each endpoint
is used at most once for each mptcp connection.
Paolo Abeni [Fri, 7 Jan 2022 00:20:20 +0000 (16:20 -0800)]
mptcp: fix per socket endpoint accounting
Since full-mesh endpoint support, the reception of a single ADD_ADDR
option can cause multiple subflows creation. When such option is
accepted we increment 'add_addr_accepted' by one. When we received
a paired RM_ADDR option, we deleted all the relevant subflows,
decrementing 'add_addr_accepted' by one for each of them.
We have a similar issue for 'local_addr_used'
Fix them moving the pm endpoint accounting outside the subflow
traversal.
projects / linux.git / log