bonding: netlink error message support for options
Add support for reporting errors via extack in both bond_newlink
and bond_changelink.
Instead of having to look in the kernel log for why an option was not
correct just report the error to the user via the extack variable.
What is currently reported today:
ip link add bond0 type bond
ip link set bond0 up
ip link set bond0 type bond mode 4
RTNETLINK answers: Device or resource busy
After this change:
ip link add bond0 type bond
ip link set bond0 up
ip link set bond0 type bond mode 4
Error: unable to set option because the bond is up.
Jakub Kicinski [Fri, 10 Jun 2022 06:02:02 +0000 (23:02 -0700)]
Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
100GbE Intel Wired LAN Driver Updates 2022-06-08
Michal prevents setting of VF VLAN capabilities in switchdev mode and
removes, not needed, specific switchdev VLAN operations.
Karol converts u16 variables to unsigned int for GNSS calculations.
Christophe Jaillet corrects the parameter order for a couple of
devm_kcalloc() calls.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: Use correct order for the parameters of devm_kcalloc()
ice: remove u16 arithmetic in ice_gnss
ice: remove VLAN representor specific ops
ice: don't set VF VLAN caps in switchdev
====================
Jakub Kicinski [Fri, 10 Jun 2022 05:05:36 +0000 (22:05 -0700)]
Merge tag 'mlx5-fixes-2022-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2022-06-08
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2022-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: fs, fail conflicting actions
net/mlx5: Rearm the FW tracer after each tracer event
net/mlx5: E-Switch, pair only capable devices
net/mlx5e: CT: Fix cleanup of CT before cleanup of TC ct rules
Revert "net/mlx5e: Allow relaxed ordering over VFs"
MAINTAINERS: adjust MELLANOX ETHERNET INNOVA DRIVERS to TLS support removal
====================
Andrea Mayer [Wed, 8 Jun 2022 09:19:17 +0000 (11:19 +0200)]
net: seg6: fix seg6_lookup_any_nexthop() to handle VRFs using flowi_l3mdev
Commit 40867d74c374 ("net: Add l3mdev index to flow struct and avoid oif
reset for port devices") adds a new entry (flowi_l3mdev) in the common
flow struct used for indicating the l3mdev index for later rule and
table matching.
The l3mdev_update_flow() has been adapted to properly set the
flowi_l3mdev based on the flowi_oif/flowi_iif. In fact, when a valid
flowi_iif is supplied to the l3mdev_update_flow(), this function can
update the flowi_l3mdev entry only if it has not yet been set (i.e., the
flowi_l3mdev entry is equal to 0).
The SRv6 End.DT6 behavior in VRF mode leverages a VRF device in order to
force the routing lookup into the associated routing table. This routing
operation is performed by seg6_lookup_any_nextop() preparing a flowi6
data structure used by ip6_route_input_lookup() which, in turn,
(indirectly) invokes l3mdev_update_flow().
However, seg6_lookup_any_nexthop() does not initialize the new
flowi_l3mdev entry which is filled with random garbage data. This
prevents l3mdev_update_flow() from properly updating the flowi_l3mdev
with the VRF index, and thus SRv6 End.DT6 (VRF mode)/DT46 behaviors are
broken.
This patch correctly initializes the flowi6 instance allocated and used
by seg6_lookup_any_nexhtop(). Specifically, the entire flowi6 instance
is wiped out: in case new entries are added to flowi/flowi6 (as happened
with the flowi_l3mdev entry), we should no longer have incorrectly
initialized values. As a result of this operation, the value of
flowi_l3mdev is also set to 0.
The proposed fix can be tested easily. Starting from the commit
referenced in the Fixes, selftests [1],[2] indicate that the SRv6
End.DT6 (VRF mode)/DT46 behaviors no longer work correctly. By applying
this patch, those behaviors are back to work properly again.
Jakub Kicinski [Fri, 10 Jun 2022 05:02:42 +0000 (22:02 -0700)]
Merge branch 'nfp-fixes-for-v5-19'
Simon Horman says:
====================
nfp: fixes for v5.19
this short series includes two fixes for the NFP driver.
1. Restructure GRE+VLAN flower offload to address a miss match
between the NIC firmware and driver implementation which
prevented these features from working in combination.
2. Prevent unnecessary warnings regarding rate limiting support.-
It is expected that this feature to not _always_ be present
but this was not taken into account when the code to check
for this feature was added.
====================
nfp: flower: restructure flow-key for gre+vlan combination
Swap around the GRE and VLAN parts in the flow-key offloaded by
the driver to fit in with other tunnel types and the firmware.
Without this change used cases with GRE+VLAN on the outer header
does not get offloaded as the flow-key mismatches what the
firmware expect.
Fixes: 0d630f58989a ("nfp: flower: add support to offload QinQ match") Fixes: 5a2b93041646 ("nfp: flower-ct: compile match sections of flow_payload") Signed-off-by: Etienne van der Linde <[email protected]> Signed-off-by: Louis Peens <[email protected]> Signed-off-by: Yinjun Zhang <[email protected]> Signed-off-by: Simon Horman <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
Fei Qin [Wed, 8 Jun 2022 09:29:00 +0000 (11:29 +0200)]
nfp: avoid unnecessary check warnings in nfp_app_get_vf_config
nfp_net_sriov_check is added in nfp_app_get_vf_config which intends
to ensure ivi->vlan_proto and ivi->max_tx_rate/min_tx_rate can be
read from VF config table only when firmware supports corresponding
capability.
However, "nfp_app_get_vf_config" can be called by commands like
"ip a", "ip link set $DEV up" and "ip link set $DEV vf $NUM vlan
$param" (with VF). When using commands above, many warnings
"ndo_set_vf_<cap_x> not supported" would appear if firmware doesn't
support VF rate limit and 802.1ad VLAN assingment. If more VFs are
created, things could get worse.
Thus, this patch add an extra bool parameter for nfp_net_sriov_check
to enable/disable the cap check warning report. Unnecessary warnings
in nfp_app_get_vf_config can be avoided. Valid warnings in kinds of
vf setting function can be reserved.
Fixes: e0d0e1fdf1ed ("nfp: VF rate limit support") Fixes: 59359597b010 ("nfp: support 802.1ad VLAN assingment to VF") Signed-off-by: Fei Qin <[email protected]> Signed-off-by: Yinjun Zhang <[email protected]> Signed-off-by: Louis Peens <[email protected]> Signed-off-by: Simon Horman <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
Eric Dumazet [Wed, 8 Jun 2022 15:46:40 +0000 (08:46 -0700)]
team: adopt u64_stats_t
As explained in commit 316580b69d0a ("u64_stats: provide u64_stats_t type")
we should use u64_stats_t and related accessors to avoid load/store tearing.
Eric Dumazet [Wed, 8 Jun 2022 15:46:39 +0000 (08:46 -0700)]
drop_monitor: adopt u64_stats_t
As explained in commit 316580b69d0a ("u64_stats: provide u64_stats_t type")
we should use u64_stats_t and related accessors to avoid load/store tearing.
Eric Dumazet [Wed, 8 Jun 2022 15:46:38 +0000 (08:46 -0700)]
devlink: adopt u64_stats_t
As explained in commit 316580b69d0a ("u64_stats: provide u64_stats_t type")
we should use u64_stats_t and related accessors to avoid load/store tearing.
Eric Dumazet [Wed, 8 Jun 2022 15:46:37 +0000 (08:46 -0700)]
net: adopt u64_stats_t in struct pcpu_sw_netstats
As explained in commit 316580b69d0a ("u64_stats: provide u64_stats_t type")
we should use u64_stats_t and related accessors to avoid load/store tearing.
Eric Dumazet [Wed, 8 Jun 2022 15:46:33 +0000 (08:46 -0700)]
ipvlan: adopt u64_stats_t
As explained in commit 316580b69d0a ("u64_stats: provide u64_stats_t type")
we should use u64_stats_t and related accessors to avoid load/store tearing.
Eric Dumazet [Wed, 8 Jun 2022 15:46:32 +0000 (08:46 -0700)]
vlan: adopt u64_stats_t
As explained in commit 316580b69d0a ("u64_stats: provide u64_stats_t type")
we should use u64_stats_t and related accessors to avoid load/store tearing.
Add READ_ONCE() when reading rx_errors & tx_dropped.
Jakub Kicinski [Wed, 8 Jun 2022 04:39:55 +0000 (21:39 -0700)]
net: rename reference+tracking helpers
Netdev reference helpers have a dev_ prefix for historic
reasons. Renaming the old helpers would be too much churn
but we can rename the tracking ones which are relatively
recent and should be the default for new code.
David Howells [Thu, 9 Jun 2022 20:46:04 +0000 (21:46 +0100)]
netfs: Fix gcc-12 warning by embedding vfs inode in netfs_i_context
While randstruct was satisfied with using an open-coded "void *" offset
cast for the netfs_i_context <-> inode casting, __builtin_object_size() as
used by FORTIFY_SOURCE was not as easily fooled. This was causing the
following complaint[1] from gcc v12:
In file included from include/linux/string.h:253,
from include/linux/ceph/ceph_debug.h:7,
from fs/ceph/inode.c:2:
In function 'fortify_memset_chk',
inlined from 'netfs_i_context_init' at include/linux/netfs.h:326:2,
inlined from 'ceph_alloc_inode' at fs/ceph/inode.c:463:2:
include/linux/fortify-string.h:242:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning]
242 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix this by embedding a struct inode into struct netfs_i_context (which
should perhaps be renamed to struct netfs_inode). The struct inode
vfs_inode fields are then removed from the 9p, afs, ceph and cifs inode
structs and vfs_inode is then simply changed to "netfs.inode" in those
filesystems.
Further, rename netfs_i_context to netfs_inode, get rid of the
netfs_inode() function that converted a netfs_i_context pointer to an
inode pointer (that can now be done with &ctx->inode) and rename the
netfs_i_context() function to netfs_inode() (which is now a wrapper
around container_of()).
Kees suggested doing it with a pair structure[2] and a special
declarator to insert that into the network filesystem's inode
wrapper[3], but I think it's cleaner to embed it - and then it doesn't
matter if struct randomisation reorders things.
Dave Chinner suggested using a filesystem-specific VFS_I() function in
each filesystem to convert that filesystem's own inode wrapper struct
into the VFS inode struct[4].
Version #2:
- Fix a couple of missed name changes due to a disabled cifs option.
- Rename nfs_i_context to nfs_inode
- Use "netfs" instead of "nic" as the member name in per-fs inode wrapper
structs.
[ This also undoes commit 507160f46c55 ("netfs: gcc-12: temporarily
disable '-Wattribute-warning' for now") that is no longer needed ]
Yupeng Li [Wed, 8 Jun 2022 01:12:29 +0000 (09:12 +0800)]
MIPS: Loongson-3: fix compile mips cpu_hwmon as module build error.
set cpu_hwmon as a module build with loongson_sysconf, loongson_chiptemp
undefined error,fix cpu_hwmon compile options to be bool.Some kernel
compilation error information is as follows:
Alexander Aring [Thu, 28 Apr 2022 03:05:33 +0000 (23:05 -0400)]
net: 6lowpan: use array for find nhc id
This patch will remove the complete overengineered and overthinking rb data
structure for looking up the nhc by nhcid. Instead we using the existing
nhc next header array and iterate over it. It works now for 1 byte values
only. However there are only 1 byte nhc id values currently
supported and IANA also does not specify large than 1 byte values yet.
If there are 2 byte values for nhc ids specified we can revisit this
data structure and add support for it.
Alexander Aring [Thu, 28 Apr 2022 03:05:32 +0000 (23:05 -0400)]
net: 6lowpan: remove const from scalars
The keyword const makes no sense for scalar types inside the lowpan_nhc
structure. Most compilers will ignore it so we remove the keyword from
the scalar types.
Linus Torvalds [Thu, 9 Jun 2022 19:26:05 +0000 (12:26 -0700)]
Merge tag 'fs_for_v5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext2, writeback, and quota fixes and cleanups from Jan Kara:
"A fix for race in writeback code and two cleanups in quota and ext2"
* tag 'fs_for_v5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: Prevent memory allocation recursion while holding dq_lock
writeback: Fix inode->i_io_list not be protected by inode->i_lock error
fs: Fix syntax errors in comments
Linus Torvalds [Thu, 9 Jun 2022 19:17:43 +0000 (12:17 -0700)]
Merge tag 'powerpc-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- On 32-bit fix overread/overwrite of thread_struct via ptrace
PEEK/POKE.
- Fix softirqs not switching to the softirq stack since we moved
irq_exit().
- Force thread size increase when KASAN is enabled to avoid stack
overflows.
- On Book3s 64 mark more code as not to be instrumented by KASAN to
avoid crashes.
- Exempt __get_wchan() from KASAN checking, as it's inherently racy.
- Fix a recently introduced crash in the papr_scm driver in some
configurations.
- Remove include of <generated/compile.h> which is forbidden.
Thanks to Ariel Miculas, Chen Jingwen, Christophe Leroy, Erhard Furtner,
He Ying, Kees Cook, Masahiro Yamada, Nageswara R Sastry, Paul Mackerras,
Sachin Sant, Vaibhav Jain, and Wanming Hu.
* tag 'powerpc-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/32: Fix overread/overwrite of thread_struct via ptrace
powerpc/book3e: get rid of #include <generated/compile.h>
powerpc/kasan: Force thread size increase with KASAN
powerpc/papr_scm: don't requests stats with '0' sized stats buffer
powerpc: Don't select HAVE_IRQ_EXIT_ON_IRQ_STACK
powerpc/kasan: Silence KASAN warnings in __get_wchan()
powerpc/kasan: Mark more real-mode code as not to be instrumented
Linus Torvalds [Thu, 9 Jun 2022 18:29:36 +0000 (11:29 -0700)]
netfs: gcc-12: temporarily disable '-Wattribute-warning' for now
This is a pure band-aid so that I can continue merging stuff from people
while some of the gcc-12 fallout gets sorted out.
In particular, gcc-12 is very unhappy about the kinds of pointer
arithmetic tricks that netfs does, and that makes the fortify checks
trigger in afs and ceph:
In function ‘fortify_memset_chk’,
inlined from ‘netfs_i_context_init’ at include/linux/netfs.h:327:2,
inlined from ‘afs_set_netfs_context’ at fs/afs/inode.c:61:2,
inlined from ‘afs_root_iget’ at fs/afs/inode.c:543:2:
include/linux/fortify-string.h:258:25: warning: call to ‘__write_overflow_field’ declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning]
258 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
and the reason is that netfs_i_context_init() is passed a 'struct inode'
pointer, and then it does
where that netfs_i_context() function just does pointer arithmetic on
the inode pointer, knowing that the netfs_i_context is laid out
immediately after it in memory.
This is all truly disgusting, since the whole "netfs_i_context is laid
out immediately after it in memory" is not actually remotely true in
general, but is just made to be that way for afs and ceph.
See for example fs/cifs/cifsglob.h:
struct cifsInodeInfo {
struct {
/* These must be contiguous */
struct inode vfs_inode; /* the VFS's inode record */
struct netfs_i_context netfs_ctx; /* Netfslib context */
};
[...]
and realize that this is all entirely wrong, and the pointer arithmetic
that netfs_i_context() is doing is also very very wrong and wouldn't
give the right answer if netfs_ctx had different alignment rules from a
'struct inode', for example).
Anyway, that's just a long-winded way to say "the gcc-12 warning is
actually quite reasonable, and our code happens to work but is pretty
disgusting".
This is getting fixed properly, but for now I made the mistake of
thinking "the week right after the merge window tends to be calm for me
as people take a breather" and I did a sustem upgrade. And I got gcc-12
as a result, so to continue merging fixes from people and not have the
end result drown in warnings, I am fixing all these gcc-12 issues I hit.
Linus Torvalds [Thu, 9 Jun 2022 17:11:12 +0000 (10:11 -0700)]
gcc-12: disable '-Warray-bounds' universally for now
In commit 8b202ee21839 ("s390: disable -Warray-bounds") the s390 people
disabled the '-Warray-bounds' warning for gcc-12, because the new logic
in gcc would cause warnings for their use of the S390_lowcore macro,
which accesses absolute pointers.
It turns out gcc-12 has many other issues in this area, so this takes
that s390 warning disable logic, and turns it into a kernel build config
entry instead.
Part of the intent is that we can make this all much more targeted, and
use this conflig flag to disable it in only particular configurations
that cause problems, with the s390 case as an example:
select GCC12_NO_ARRAY_BOUNDS
and we could do that for other configuration cases that cause issues.
Or we could possibly use the CONFIG_CC_NO_ARRAY_BOUNDS thing in a more
targeted way, and disable the warning only for particular uses: again
the s390 case as an example:
We'll try to limit this later, since the gcc-12 problems are rare enough
that *much* of the kernel can be built with it without disabling this
warning.
Linus Torvalds [Thu, 9 Jun 2022 17:03:28 +0000 (10:03 -0700)]
mellanox: mlx5: avoid uninitialized variable warning with gcc-12
gcc-12 started warning about 'tracker' being used uninitialized:
drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c: In function ‘mlx5_do_bond’:
drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c:786:28: warning: ‘tracker’ is used uninitialized [-Wuninitialized]
786 | struct lag_tracker tracker;
| ^~~~~~~
which seems to be because it doesn't track how the use (and
initialization) is bound by the 'do_bond' flag.
But admittedly that 'do_bond' usage is fairly complicated, and involves
passing it around as an argument to helper functions, so it's somewhat
understandable that gcc doesn't see how that all works.
This function could be rewritten to make the use of that tracker
variable more obviously safe, but for now I'm just adding the forced
initialization of it.
This change retrieves network metrics for virtual functions from the
device and exports them via the iproute2 interface.
The code for retrieving the statistics from the device is taken from the
out-of-tree driver. The feature was introduced with version 2.0.75.7,
so the diff between this version and the previous version 2.0.72.4 was
used to identify required changes. The export via ethtool is omitted in
favor of using the standard ndo_get_vf_stats interface.
Per-VF statistics can now be printed, for instance, via
Linus Torvalds [Thu, 9 Jun 2022 16:41:42 +0000 (09:41 -0700)]
gcc-12: disable '-Wdangling-pointer' warning for now
While the concept of checking for dangling pointers to local variables
at function exit is really interesting, the gcc-12 implementation is not
compatible with reality, and results in false positives.
For example, gcc sees us putting things on a local list head allocated
on the stack, which involves exactly those kinds of pointers to the
local stack entry:
In function ‘__list_add’,
inlined from ‘list_add_tail’ at include/linux/list.h:102:2,
inlined from ‘rebuild_snap_realms’ at fs/ceph/snap.c:434:2:
include/linux/list.h:74:19: warning: storing the address of local variable ‘realm_queue’ in ‘*&realm_27(D)->rebuild_item.prev’ [-Wdangling-pointer=]
74 | new->prev = prev;
| ~~~~~~~~~~^~~~~~
But then gcc - understandably - doesn't really understand the big
picture how the doubly linked list works, so doesn't see how we then end
up emptying said list head in a loop and the pointer we added has been
removed.
Gcc also complains about us (intentionally) using this as a way to store
a kind of fake stack trace, eg
drivers/acpi/acpica/utdebug.c:40:38: warning: storing the address of local variable ‘current_sp’ in ‘acpi_gbl_entry_stack_pointer’ [-Wdangling-pointer=]
40 | acpi_gbl_entry_stack_pointer = ¤t_sp;
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~
which is entirely reasonable from a compiler standpoint, and we may want
to change those kinds of patterns, but not not.
So this is one of those "it would be lovely if the compiler were to
complain about us leaving dangling pointers to the stack", but not this
way.
Linus Torvalds [Wed, 8 Jun 2022 23:59:29 +0000 (16:59 -0700)]
drm: imx: fix compiler warning with gcc-12
Gcc-12 correctly warned about this code using a non-NULL pointer as a
truth value:
drivers/gpu/drm/imx/ipuv3-crtc.c: In function ‘ipu_crtc_disable_planes’:
drivers/gpu/drm/imx/ipuv3-crtc.c:72:21: error: the comparison will always evaluate as ‘true’ for the address of ‘plane’ will never be NULL [-Werror=address]
72 | if (&ipu_crtc->plane[1] && plane == &ipu_crtc->plane[1]->base)
| ^
due to the extraneous '&' address-of operator.
Philipp Zabel points out that The mistake had no adverse effect since
the following condition doesn't actually dereference the NULL pointer,
but the intent of the code was obviously to check for it, not to take
the address of the member.
Zheng Zengkai [Thu, 9 Jun 2022 02:56:56 +0000 (10:56 +0800)]
Documentation/features: Update the arch support status files
The arch support status files don't match reality as of v5.19-rc1,
use the features-refresh.sh to refresh all the arch-support.txt files
in place. The main effect is to add entries for the new loong
architecture.
powerpc/32: Fix overread/overwrite of thread_struct via ptrace
The ptrace PEEKUSR/POKEUSR (aka PEEKUSER/POKEUSER) API allows a process
to read/write registers of another process.
To get/set a register, the API takes an index into an imaginary address
space called the "USER area", where the registers of the process are
laid out in some fashion.
The kernel then maps that index to a particular register in its own data
structures and gets/sets the value.
The API only allows a single machine-word to be read/written at a time.
So 4 bytes on 32-bit kernels and 8 bytes on 64-bit kernels.
The way floating point registers (FPRs) are addressed is somewhat
complicated, because double precision float values are 64-bit even on
32-bit CPUs. That means on 32-bit kernels each FPR occupies two
word-sized locations in the USER area. On 64-bit kernels each FPR
occupies one word-sized location in the USER area.
Internally the kernel stores the FPRs in an array of u64s, or if VSX is
enabled, an array of pairs of u64s where one half of each pair stores
the FPR. Which half of the pair stores the FPR depends on the kernel's
endianness.
To handle the different layouts of the FPRs depending on VSX/no-VSX and
big/little endian, the TS_FPR() macro was introduced.
Unfortunately the TS_FPR() macro does not take into account the fact
that the addressing of each FPR differs between 32-bit and 64-bit
kernels. It just takes the index into the "USER area" passed from
userspace and indexes into the fp_state.fpr array.
On 32-bit there are 64 indexes that address FPRs, but only 32 entries in
the fp_state.fpr array, meaning the user can read/write 256 bytes past
the end of the array. Because the fp_state sits in the middle of the
thread_struct there are various fields than can be overwritten,
including some pointers. As such it may be exploitable.
It has also been observed to cause systems to hang or otherwise
misbehave when using gdbserver, and is probably the root cause of this
report which could not be easily reproduced:
https://lore.kernel.org/linuxppc-dev/dc38afe9-6b78-f3f5-666b-986939e40fc6@keymile.com/
Rather than trying to make the TS_FPR() macro even more complicated to
fix the bug, or add more macros, instead add a special-case for 32-bit
kernels. This is more obvious and hopefully avoids a similar bug
happening again in future.
Note that because 32-bit kernels never have VSX enabled the code doesn't
need to consider TS_FPRWIDTH/OFFSET at all. Add a BUILD_BUG_ON() to
ensure that 32-bit && VSX is never enabled.
Paolo Abeni [Thu, 9 Jun 2022 10:42:03 +0000 (12:42 +0200)]
Merge branch 'vmxnet3-upgrade-to-version-7'
Ronak Doshi says:
====================
vmxnet3: upgrade to version 7
vmxnet3 emulation has recently added several new features including
support for uniform passthrough(UPT). To make UPT work vmxnet3 has
to be enhanced as per the new specification. This patch series
extends the vmxnet3 driver to leverage these new features.
Compatibility is maintained using existing vmxnet3 versioning mechanism as
follows:
- new features added to vmxnet3 emulation are associated with new vmxnet3
version viz. vmxnet3 version 7.
- emulation advertises all the versions it supports to the driver.
- during initialization, vmxnet3 driver picks the highest version number
supported by both the emulation and the driver and configures emulation
to run at that version.
In particular, following changes are introduced:
Patch 1:
This patch introduces utility macros for vmxnet3 version 7 comparison
and updates Copyright information.
Patch 2:
This patch adds new capability registers to fine control enablement of
individual features based on emulation and passthrough.
Patch 3:
This patch adds support for large passthrough BAR register.
Patch 4:
This patch adds support for out of order rx completion processing.
Patch 5:
This patch introduces new command to set ring buffer sizes to pass this
information to the hardware.
Patch 6:
For better performance, hardware has a requirement to limit number of TSO
descriptors. This patch adds that support.
Patch 7:
With vmxnet3 version 7, new descriptor fields are used to indicate
encapsulation offload.
Patch 8:
With all vmxnet3 version 7 changes incorporated in the vmxnet3 driver,
with this patch, the driver can configure emulation to run at vmxnet3
version 7.
Changes in v2->v3:
- use correct byte ordering for ringBufSize
Changes in v2:
- use local rss_fields variable for the rss capability checks in patch 2
====================
Ronak Doshi [Wed, 8 Jun 2022 03:23:53 +0000 (20:23 -0700)]
vmxnet3: update to version 7
With all vmxnet3 version 7 changes incorporated in the vmxnet3 driver,
the driver can configure emulation to run at vmxnet3 version 7, provided
the emulation advertises support for version 7.
Ronak Doshi [Wed, 8 Jun 2022 03:23:52 +0000 (20:23 -0700)]
vmxnet3: use ext1 field to indicate encapsulated packet
Till vmxnet3 version 6, om field of transmit descriptor was used
to indicate encapsulated offload packet and msscof was used to
indirectly indicate TSO/CSO. From version 7 and later, ext1 field
will be used to indicate whether packet is encapsulated or not and
om fields will continue to indicate if the packet is TSO or CSO.
Ronak Doshi [Wed, 8 Jun 2022 03:23:51 +0000 (20:23 -0700)]
vmxnet3: limit number of TXDs used for TSO packet
Currently, vmxnet3 does not have a limit on number of descriptors
used for a TSO packet. However, with UPT, for hardware performance
reasons, this patch limits the number of transmit descriptors to 24
for a TSO packet.
Ronak Doshi [Wed, 8 Jun 2022 03:23:50 +0000 (20:23 -0700)]
vmxnet3: add command to set ring buffer sizes
This patch adds a new command to set ring buffer sizes. This is
required to pass the buffer size information to passthrough devices.
For performance reasons, with version7 and later, ring1 will contain
only mtu size buffers (bound to 3K). Packets > 3K will use both ring1
and ring2.
Also, ring sizes are round down to power of 2 and ring2 default
size is increased to 512.
Ronak Doshi [Wed, 8 Jun 2022 03:23:49 +0000 (20:23 -0700)]
vmxnet3: add support for out of order rx completion
Currently, vmxnet3 processes rx completions in-order i.e. no
out of order completion descriptor is expected. With UPT, if
hardware supports LRO, then hardware can report out of order
rx completions. This patch enhances vmxnet3 to add this support.
This supports gets effective only when the corresponding feature
bit is set.
Also, minor enhancements are done for performance.
Ronak Doshi [Wed, 8 Jun 2022 03:23:48 +0000 (20:23 -0700)]
vmxnet3: add support for large passthrough BAR register
For vmxnet3 to work in UPT mode, the BAR sizes have been increased.
The PT page has been extended to 2 pages and also includes OOB pages
as a part of PT BAR. This patch enhances vmxnet3 to use appropriate
BAR offsets based on the capability registered. To use new offsets,
VMXNET3_CAP_LARGE_BAR needs to be set by the device. If it is not set
then the device will use legacy PT page layout.
Ronak Doshi [Wed, 8 Jun 2022 03:23:47 +0000 (20:23 -0700)]
vmxnet3: add support for capability registers
This patch enhances vmxnet3 to suuport capability registers which
allows it to enable features selectively. The DCR register tracks
the capabilities vmxnet3 device supports. The PTCR register states
the capabilities that the passthrough device supports.
With the help of these registers, vmxnet3 can enable only those
features which the passthrough device supoprts. This allows
smooth trasition to Uniform-Passthrough (UPT) mode if the virtual
nic requests it. If PTCR register returns nothing or error it means
UPT is not being requested and vnic will continue in emulation mode.
Ronak Doshi [Wed, 8 Jun 2022 03:23:46 +0000 (20:23 -0700)]
vmxnet3: prepare for version 7 changes
vmxnet3 is currently at version 6 and this patch initiates the
preparation to accommodate changes for upto version 7. Introduced
utility macros for vmxnet3 version 7 comparison and update Copyright
information.
Systems with AST graphics can have multiple output; typically VGA
plus some other port. Record detected output chips in a bitmask and
initialize each output on its own.
Assume a VGA output by default and use SIL164 and DP501 if available.
For ASTDP assume that it can run in parallel with VGA.
Tested on AST2100.
v3:
* define a macro for each BIT(ast_tx_chip) (Patrik)
v2:
* make VGA/SIL164/DP501 mutually exclusive
Justin Stitt [Tue, 7 Jun 2022 19:11:19 +0000 (12:11 -0700)]
net: amd-xgbe: fix clang -Wformat warning
see warning:
| drivers/net/ethernet/amd/xgbe/xgbe-drv.c:2787:43: warning: format specifies
| type 'unsigned short' but the argument has type 'int' [-Wformat]
| netdev_dbg(netdev, "Protocol: %#06hx\n", ntohs(eth->h_proto));
| ~~~~~~ ^~~~~~~~~~~~~~~~~~~
Variadic functions (printf-like) undergo default argument promotion.
Documentation/core-api/printk-formats.rst specifically recommends
using the promoted-to-type's format flag.
Also, as per C11 6.3.1.1:
(https://www.open-std.org/jtc1/sc22/wg14/www/docs/n1548.pdf)
`If an int can represent all values of the original type ..., the
value is converted to an int; otherwise, it is converted to an
unsigned int. These are called the integer promotions.`
Since the argument is a u16 it will get promoted to an int and thus it is
most accurate to use the %x format specifier here. It should be noted that the
`#06` formatting sugar does not alter the promotion rules.
Muchun Song [Tue, 7 Jun 2022 07:02:14 +0000 (15:02 +0800)]
tcp: use alloc_large_system_hash() to allocate table_perturb
In our server, there may be no high order (>= 6) memory since we reserve
lots of HugeTLB pages when booting. Then the system panic. So use
alloc_large_system_hash() to allocate table_perturb.
Alvin Šipraga [Tue, 7 Jun 2022 18:46:24 +0000 (20:46 +0200)]
net: dsa: realtek: rtl8365mb: fix GMII caps for ports with internal PHY
Since commit a18e6521a7d9 ("net: phylink: handle NA interface mode in
phylink_fwnode_phy_connect()"), phylib defaults to GMII when no phy-mode
or phy-connection-type property is specified in a DSA port node of the
device tree. The same commit caused a regression in rtl8365mb whereby
phylink would fail to connect, because the driver did not advertise
support for GMII for ports with internal PHY.
It should be noted that the aforementioned regression is not because the
blamed commit was incorrect: on the contrary, the blamed commit is
correcting the previous behaviour whereby unspecified phy-mode would
cause the internal interface mode to be PHY_INTERFACE_MODE_NA. The
rtl8365mb driver only worked by accident before because it _did_
advertise support for PHY_INTERFACE_MODE_NA, despite NA being reserved
for internal use by phylink. With one mistake fixed, the other was
exposed.
Commit a5dba0f207e5 ("net: dsa: rtl8365mb: add GMII as user port mode")
then introduced implicit support for GMII mode on ports with internal
PHY to allow a PHY connection for device trees where the phy-mode is not
explicitly set to "internal". At this point everything was working OK
again.
Subsequently, commit 6ff6064605e9 ("net: dsa: realtek: convert to
phylink_generic_validate()") broke this behaviour again by discarding
the usage of rtl8365mb_phy_mode_supported() - where this GMII support
was indicated - while switching to the new .phylink_get_caps API.
With the new API, rtl8365mb_phy_mode_supported() is no longer needed.
Remove it altogether and add back the GMII capability - this time to
rtl8365mb_phylink_get_caps() - so that the above default behaviour works
for ports with internal PHY again.
Jakub Kicinski [Thu, 9 Jun 2022 04:02:22 +0000 (21:02 -0700)]
Merge branch '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-06-07
This series contains updates to ixgbe driver only.
Olivier Matz resolves an issue so that broadcast packets can still be
received when VF removes promiscuous settings and removes setting of
VLAN promiscuous, in promiscuous mode, to prevent a loop when VFs are
bridged.
* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ixgbe: fix unexpected VLAN Rx in promisc mode on VF
ixgbe: fix bcast packets Rx on VF after promisc removal
====================
Jakub Kicinski [Thu, 9 Jun 2022 04:01:23 +0000 (21:01 -0700)]
Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
40GbE Intel Wired LAN Driver Updates 2022-06-07
This series contains updates to i40e and iavf drivers.
Mateusz adds implementation for setting VF VLAN pruning to allow user to
specify visibility of VLAN tagged traffic to VFs for i40e. He also adds
waiting for result from PF for setting MAC address in iavf.
====================
====================
mv88e6xxx: fixes for reading serdes state
These are some low-priority fixes to the mv88e6xxx serdes code.
Patch 1 fixes the reporting of an_complete, which is used in the
emulation of a conventional C22 PHY. Patch from Marek.
Patch 2 makes one of the error messages in patch 2 to be consistent
with the other error messages in this function.
Patch 3 ensures that we do not miss a link-failure event.
====================
net: dsa: mv88e6xxx: correctly report serdes link failure
Phylink wants to know if the link has dropped since the last time state
was retrieved, and the BMSR gives us that. Read the BMSR and use it when
deciding the link state. Fill in the an_complete member as well for the
emulated PHY state.
net: dsa: mv88e6xxx: fix BMSR error to be consistent with others
Other errors accessing the registers in mv88e6352_serdes_pcs_get_state()
print "PHY " before the register name, except for the BMSR. Make this
consistent with the other error messages.
Marek Behún [Tue, 7 Jun 2022 11:28:42 +0000 (12:28 +0100)]
net: dsa: mv88e6xxx: use BMSR_ANEGCOMPLETE bit for filling an_complete
Commit ede359d8843a ("net: dsa: mv88e6xxx: Link in pcs_get_state() if AN
is bypassed") added the ability to link if AN was bypassed, and added
filling of state->an_complete field, but set it to true if AN was
enabled in BMCR, not when AN was reported complete in BMSR.
This was done because for some reason, when I wanted to use BMSR value
to infer an_complete, I was looking at BMSR_ANEGCAPABLE bit (which was
always 1), instead of BMSR_ANEGCOMPLETE bit.
Use BMSR_ANEGCOMPLETE for filling state->an_complete.
Fixes: ede359d8843a ("net: dsa: mv88e6xxx: Link in pcs_get_state() if AN is bypassed") Signed-off-by: Marek Behún <[email protected]> Signed-off-by: Russell King (Oracle) <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
Miaoqian Lin [Tue, 7 Jun 2022 04:11:43 +0000 (08:11 +0400)]
net: altera: Fix refcount leak in altera_tse_mdio_create
Every iteration of for_each_child_of_node() decrements
the reference count of the previous node.
When break from a for_each_child_of_node() loop,
we need to explicitly call of_node_put() on the child node when
not need anymore.
Add missing of_node_put() to avoid refcount leak.
After the first ct() action the packet headers are almost fully
re-written. The next ct() tries to re-use the existing nfct entry
and marks the packet as invalid, so it gets dropped later in the
pipeline.
Clearing the cached conntrack entry whenever packet tuple is changed
to avoid the issue.
The flow key should not be cleared though, because we should still
be able to match on the ct_state if the recirculation happens after
the tuple change but before the next ct() action.
Chen Lin [Wed, 8 Jun 2022 12:46:53 +0000 (20:46 +0800)]
net: ethernet: mtk_eth_soc: fix misuse of mem alloc interface netdev[napi]_alloc_frag
When rx_flag == MTK_RX_FLAGS_HWLRO,
rx_data_len = MTK_MAX_LRO_RX_LENGTH(4096 * 3) > PAGE_SIZE.
netdev_alloc_frag is for alloction of page fragment only.
Reference to other drivers and Documentation/vm/page_frags.rst
Branch to use __get_free_pages when ring->frag_size > PAGE_SIZE.
But was eventually revised more thoroughly:
- restrict the check to the only branch where needed, in an
uncommon GRE path that uses header_ops and calls skb_pull.
- test skb_transport_header, which is set along with csum_start
in skb_partial_csum_set in the normal header_ops datapath.
Turns out skbs can arrive in this branch without the transport
header set, e.g., through BPF redirection.
Revise the check back to check csum_start directly, and only if
CHECKSUM_PARTIAL. Do leave the check in the updated location.
Check field regardless of whether TUNNEL_CSUM is configured.
We've added 6 non-merge commits during the last 2 day(s) which contain
a total of 8 files changed, 49 insertions(+), 15 deletions(-).
The main changes are:
1) Fix an illegal copy_to_user() attempt seen by syzkaller through arm64
BPF JIT compiler, from Eric Dumazet.
2) Fix calling global functions from BPF_PROG_TYPE_EXT programs by using
the correct program context type, from Toke Høiland-Jørgensen.
3) Fix XSK TX batching invalid descriptor handling, from Maciej Fijalkowski.
4) Fix potential integer overflows in multi-kprobe link code by using safer
kvmalloc_array() allocation helpers, from Dan Carpenter.
5) Add Quentin as bpftool maintainer, from Quentin Monnet.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
MAINTAINERS: Add a maintainer for bpftool
xsk: Fix handling of invalid descriptors in XSK TX batching API
selftests/bpf: Add selftest for calling global functions from freplace
bpf: Fix calling global functions from BPF_PROG_TYPE_EXT programs
bpf: Use safer kvmalloc_array() where possible
bpf, arm64: Clear prog->jited_len along prog->jited
====================
The {dma|pio}_mode sysfs files are incorrectly documented as having a
list of the supported DMA/PIO transfer modes, while the corresponding
fields of the *struct* ata_device hold the transfer mode IDs, not masks.
To match these docs, the {dma|pio}_mode (and even xfer_mode!) sysfs
files are handled by the ata_bitfield_name_match() macro which leads to
reading such kind of nonsense from them:
While fixing the file documentation, somewhat reword the {dma|pio}_mode
file doc and add a note about being mostly useful for PATA devices to
the xfer_mode file doc...
Linus Torvalds [Wed, 8 Jun 2022 20:18:39 +0000 (13:18 -0700)]
cert host tools: Stop complaining about deprecated OpenSSL functions
OpenSSL 3.0 deprecated the OpenSSL's ENGINE API. That is as may be, but
the kernel build host tools still use it. Disable the warning about
deprecated declarations until somebody who cares fixes it.
Yifan Zhang [Fri, 3 Jun 2022 02:24:31 +0000 (10:24 +0800)]
drm/amdgpu/mes: only invalid/prime icache when finish loading both pipe MES FWs.
invalid/prime icahce operation takes effect both pipes cuconrrently,
therefore CP_MES_IC_BASE_LO/HI and CP_MES_MDBASE_LO/HI both have to be
set before prime icache. Otherwise MES hardware gets garbage data in
above regsters and causes page fault
Mark Bloch [Mon, 30 May 2022 07:46:59 +0000 (10:46 +0300)]
net/mlx5: fs, fail conflicting actions
When combining two steering rules into one check
not only do they share the same actions but those
actions are also the same. This resolves an issue where
when creating two different rules with the same match
the actions are overwritten and one of the rules is deleted
a FW syndrome can be seen in dmesg.
mlx5_core 0000:03:00.0: mlx5_cmd_check:819:(pid 2105): DEALLOC_MODIFY_HEADER_CONTEXT(0x941) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x1ab444)
Fixes: 0d235c3fabb7 ("net/mlx5: Add hash table to search FTEs in a flow-group") Signed-off-by: Mark Bloch <[email protected]> Reviewed-by: Maor Gottlieb <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
Feras Daoud [Sat, 19 Mar 2022 19:47:48 +0000 (21:47 +0200)]
net/mlx5: Rearm the FW tracer after each tracer event
The current design does not arm the tracer if traces are available before
the tracer string database is fully loaded, leading to an unfunctional tracer.
This fix will rearm the tracer every time the FW triggers tracer event
regardless of the tracer strings database status.
Mark Bloch [Thu, 26 May 2022 05:15:28 +0000 (08:15 +0300)]
net/mlx5: E-Switch, pair only capable devices
OFFLOADS paring using devcom is possible only on devices
that support LAG. Filter based on lag capabilities.
This fixes an issue where mlx5_get_next_phys_dev() was
called without holding the interface lock.
This issue was found when commit bc4c2f2e0179 ("net/mlx5: Lag, filter non compatible devices")
added an assert that verifies the interface lock is held.
Fixes: dd3fddb82780 ("net/mlx5: E-Switch, handle devcom events only for ports on the same device") Signed-off-by: Mark Bloch <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Reviewed-by: Moshe Shemesh <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
Paul Blakey [Tue, 29 Mar 2022 15:37:18 +0000 (18:37 +0300)]
net/mlx5e: CT: Fix cleanup of CT before cleanup of TC ct rules
CT cleanup assumes that all tc rules were deleted first, and so
is free to delete the CT shared resources (e.g the dr_action
fwd_action which is shared for all tuples). But currently for
uplink, this is happens in reverse, causing the below trace.
CT cleanup is called from:
mlx5e_cleanup_rep_tx()->mlx5e_cleanup_uplink_rep_tx()->
mlx5e_rep_tc_cleanup()->mlx5e_tc_esw_cleanup()->
mlx5_tc_ct_clean()
Only afterwards, tc cleanup is called from:
mlx5e_cleanup_rep_tx()->mlx5e_tc_ht_cleanup()
which would have deleted all the tc ct rules, and so delete
all the offloaded tuples.
Fix this reversing the order of init and on cleanup, which
will result in tc cleanup then ct cleanup.
Lukas Bulwahn [Wed, 1 Jun 2022 04:57:38 +0000 (06:57 +0200)]
MAINTAINERS: adjust MELLANOX ETHERNET INNOVA DRIVERS to TLS support removal
Commit 40379a0084c2 ("net/mlx5_fpga: Drop INNOVA TLS support") removes all
files in the directory drivers/net/ethernet/mellanox/mlx5/core/accel/, but
misses to adjust its reference in MAINTAINERS.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.
Remove the file entry to the removed directory in MELLANOX ETHERNET INNOVA
DRIVERS.
Arnd Bergmann [Tue, 7 Jun 2022 09:01:46 +0000 (11:01 +0200)]
au1000_eth: stop using virt_to_bus()
The conversion to the dma-mapping API in linux-2.6.11 was incomplete
and left a virt_to_bus() call around. There have been a number of
fixes for DMA mapping API abuse in this driver, but this one always
slipped through.
Change it to just use the existing dma_addr_t pointer, and make it
use the correct types throughout the driver to make it easier to
understand the virtual vs dma address spaces.
Wang Yufen [Tue, 7 Jun 2022 12:00:28 +0000 (20:00 +0800)]
ipv6: Fix signed integer overflow in l2tp_ip6_sendmsg
When len >= INT_MAX - transhdrlen, ulen = len + transhdrlen will be
overflow. To fix, we can follow what udpv6 does and subtract the
transhdrlen from the max.
Wang Yufen [Tue, 7 Jun 2022 12:00:27 +0000 (20:00 +0800)]
ipv6: Fix signed integer overflow in __ip6_append_data
Resurrect ubsan overflow checks and ubsan report this warning,
fix it by change the variable [length] type to size_t.
UBSAN: signed-integer-overflow in net/ipv6/ip6_output.c:1489:19 2147479552 + 8567 cannot be represented in type 'int'
CPU: 0 PID: 253 Comm: err Not tainted 5.16.0+ #1
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x214/0x230
show_stack+0x30/0x78
dump_stack_lvl+0xf8/0x118
dump_stack+0x18/0x30
ubsan_epilogue+0x18/0x60
handle_overflow+0xd0/0xf0
__ubsan_handle_add_overflow+0x34/0x44
__ip6_append_data.isra.48+0x1598/0x1688
ip6_append_data+0x128/0x260
udpv6_sendmsg+0x680/0xdd0
inet6_sendmsg+0x54/0x90
sock_sendmsg+0x70/0x88
____sys_sendmsg+0xe8/0x368
___sys_sendmsg+0x98/0xe0
__sys_sendmmsg+0xf4/0x3b8
__arm64_sys_sendmmsg+0x34/0x48
invoke_syscall+0x64/0x160
el0_svc_common.constprop.4+0x124/0x300
do_el0_svc+0x44/0xc8
el0_svc+0x3c/0x1e8
el0t_64_sync_handler+0x88/0xb0
el0t_64_sync+0x16c/0x170
Changes since v1:
-Change the variable [length] type to unsigned, as Eric Dumazet suggested.
Changes since v2:
-Don't change exthdrlen type in ip6_make_skb, as Paolo Abeni suggested.
Changes since v3:
-Don't change ulen type in udpv6_sendmsg and l2tp_ip6_sendmsg, as
Jakub Kicinski suggested.
Mark Brown [Tue, 7 Jun 2022 16:51:28 +0000 (17:51 +0100)]
arm64/sme: Fix tests for 0b1111 value ID registers
For both ID_AA64SMFR0_EL1.I16I64 and ID_AA64SMFR0_EL1.I8I32 we check for
the presence of the feature by looking for a specific ID value of 0x4 but
should instead be checking for the value 0xf defined by the architecture.
This had no practical effect since we are looking for values >= our define
and the only valid values in the architecture are 0b0000 and 0b1111 so we
would detect things appropriately with the architecture as it stands even
with the incorrect defines.
Xiaohui Zhang [Tue, 7 Jun 2022 08:32:30 +0000 (16:32 +0800)]
nfc: nfcmrvl: Fix memory leak in nfcmrvl_play_deferred
Similar to the handling of play_deferred in commit 19cfe912c37b
("Bluetooth: btusb: Fix memory leak in play_deferred"), we thought
a patch might be needed here as well.
Currently usb_submit_urb is called directly to submit deferred tx
urbs after unanchor them.
So the usb_giveback_urb_bh would failed to unref it in usb_unanchor_urb
and cause memory leak.
Put those urbs in tx_anchor to avoid the leak, and also fix the error
handling.
projects / linux.git / log