rtla: Fix segmentation fault when failing to enable -t
rtla osnoise and timerlat are causing a segmentation fault when running
with the --trace option on a kernel that does not support multiple
instances. For example:
[root@f34 rtla]# rtla osnoise top -t
failed to enable the tracer osnoise
Could not enable osnoiser tracer for tracing
Failed to enable the trace instance
Segmentation fault (core dumped)
This error happens because the exit code of the tools is trying
to destroy the trace instance that failed to be created.
Make osnoise_destroy_tool() aware of possible NULL osnoise_tool *,
and do not attempt to destroy it. This also simplifies the exit code.
Christian Löhle [Fri, 4 Feb 2022 15:11:37 +0000 (15:11 +0000)]
mmc: block: fix read single on recovery logic
On reads with MMC_READ_MULTIPLE_BLOCK that fail,
the recovery handler will use MMC_READ_SINGLE_BLOCK for
each of the blocks, up to MMC_READ_SINGLE_RETRIES times each.
The logic for this is fixed to never report unsuccessful reads
as success to the block layer.
On command error with retries remaining, blk_update_request was
called with whatever value error was set last to.
In case it was last set to BLK_STS_OK (default), the read will be
reported as success, even though there was no data read from the device.
This could happen on a CRC mismatch for the response,
a card rejecting the command (e.g. again due to a CRC mismatch).
In case it was last set to BLK_STS_IOERR, the error is reported correctly,
but no retries will be attempted.
Commit a314520d82317650 ("arm64: disable Broadcom Vulcan platform")
did not remove the ARCH_VULCAN configuration symbol, as there were still
references to this symbol.
As of commits 240d3d5b2a7a3263 ("gpio: xlp: update GPIO_XLP dependency") and f85a543e5373eeba ("arm64: defconfig: drop ARCH_VULCAN"), the last users
of ARCH_VULCAN have been removed.
NeilBrown [Mon, 17 Jan 2022 05:36:53 +0000 (16:36 +1100)]
SUNRPC: lock against ->sock changing during sysfs read
->sock can be set to NULL asynchronously unless ->recv_mutex is held.
So it is important to hold that mutex. Otherwise a sysfs read can
trigger an oops.
Commit 17f09d3f619a ("SUNRPC: Check if the xprt is connected before
handling sysfs reads") appears to attempt to fix this problem, but it
only narrows the race window.
Fixes: 17f09d3f619a ("SUNRPC: Check if the xprt is connected before handling sysfs reads") Fixes: a8482488a7d6 ("SUNRPC query transport's source port") Signed-off-by: NeilBrown <[email protected]> Signed-off-by: Anna Schumaker <[email protected]>
Add the description of @server and @fhandle, and remove the excess
@inode in nfs4_proc_get_locations() kernel-doc comment to remove
warnings found by running scripts/kernel-doc, which is caused by
using 'make W=1'.
fs/nfs/nfs4proc.c:8219: warning: Function parameter or member 'server'
not described in 'nfs4_proc_get_locations'
fs/nfs/nfs4proc.c:8219: warning: Function parameter or member 'fhandle'
not described in 'nfs4_proc_get_locations'
fs/nfs/nfs4proc.c:8219: warning: Excess function parameter 'inode'
description in 'nfs4_proc_get_locations'
Dan Aloni [Tue, 25 Jan 2022 20:06:46 +0000 (22:06 +0200)]
xprtrdma: fix pointer derefs in error cases of rpcrdma_ep_create
If there are failures then we must not leave the non-NULL pointers with
the error value, otherwise `rpcrdma_ep_destroy` gets confused and tries
free them, resulting in an Oops.
Trond Myklebust [Wed, 2 Feb 2022 23:52:01 +0000 (18:52 -0500)]
NFS: Fix initialisation of nfs_client cl_flags field
For some long forgotten reason, the nfs_client cl_flags field is
initialised in nfs_get_client() instead of being initialised at
allocation time. This quirk was harmless until we moved the call to
nfs_create_rpc_client().
Fixes: dd99e9f98fbf ("NFSv4: Initialise connection to the server in nfs4_alloc_client()") Cc: [email protected] # 4.8.x Signed-off-by: Trond Myklebust <[email protected]> Signed-off-by: Anna Schumaker <[email protected]>
Daniel Vetter [Mon, 31 Jan 2022 21:05:32 +0000 (22:05 +0100)]
MAINTAINERS: Add entry for fbdev core
Ever since Tomi extracted the core code in 2014 it's been defacto me
maintaining this, with help from others from dri-devel and sometimes
Linus (but those are mostly merge conflicts):
$ git shortlog -ns drivers/video/fbdev/core/ | head -n5
35 Daniel Vetter
23 Linus Torvalds
10 Hans de Goede
9 Dave Airlie
6 Peter Rosin
I think ideally we'd also record that the various firmware fb drivers
(efifb, vesafb, ...) are also maintained in drm-misc because for the
past few years the patches have either been to fix handover issues
with drm drivers, or caused handover issues with drm drivers. So any
other tree just doesn't make sense. But also, there's plenty of
outdated MAINTAINER entries for these with people and git trees that
haven't been active in years, so maybe let's just leave them alone.
And furthermore distros are now adopting simpledrm as the firmware fb
driver, so hopefully the need to care about the fbdev firmware drivers
will go down going forward.
Note that drm-misc is group maintained, I expect that to continue like
we've done before, so no new expectations that patches all go through
my hands. That would be silly. This also means I'm happy to put any
other volunteer's name in the M: line, but otherwise git log says I'm
the one who's stuck with this.
Helge Deller [Mon, 7 Feb 2022 15:59:31 +0000 (16:59 +0100)]
fbcon: Avoid 'cap' set but not used warning
Fix this kernel test robot warning:
drivers/video/fbdev/core/fbcon.c: In function 'fbcon_init':
drivers/video/fbdev/core/fbcon.c:1028:6: warning: variable 'cap' set but not used [-Wunused-but-set-variable]
The cap variable is only used when CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION
is enabled. Drop the temporary variable and use info->flags instead.
Oliver Barta [Tue, 8 Feb 2022 08:46:45 +0000 (09:46 +0100)]
regulator: core: fix false positive in regulator_late_cleanup()
The check done by regulator_late_cleanup() to detect whether a regulator
is on was inconsistent with the check done by _regulator_is_enabled().
While _regulator_is_enabled() takes the enable GPIO into account,
regulator_late_cleanup() was not doing that.
This resulted in a false positive, e.g. when a GPIO-controlled fixed
regulator was used, which was not enabled at boot time, e.g.
Such regulator doesn't have an is_enabled() operation. Nevertheless
it's state can be determined based on the enable GPIO. The check in
regulator_late_cleanup() wrongly assumed that the regulator is on and
tried to disable it.
Udipto Goswami [Mon, 7 Feb 2022 04:25:58 +0000 (09:55 +0530)]
usb: dwc3: gadget: Prevent core from processing stale TRBs
With CPU re-ordering on write instructions, there might
be a chance that the HWO is set before the TRB is updated
with the new mapped buffer address.
And in the case where core is processing a list of TRBs
it is possible that it fetched the TRBs when the HWO is set
but before the buffer address is updated.
Prevent this by adding a memory barrier before the HWO
is updated to ensure that the core always process the
updated TRBs.
Samuel Thibault [Sun, 6 Feb 2022 01:56:26 +0000 (02:56 +0100)]
speakup-dectlk: Restore pitch setting
d97a9d7aea04 ("staging/speakup: Add inflection synth parameter")
introduced the inflection parameter, but happened to drop the pitch
parameter from the dectlk driver. This restores it.
Niklas Cassel [Fri, 4 Feb 2022 13:02:25 +0000 (13:02 +0000)]
gpio: sifive: use the correct register to read output values
Setting the output of a GPIO to 1 using gpiod_set_value(), followed by
reading the same GPIO using gpiod_get_value(), will currently yield an
incorrect result.
This is because the SiFive GPIO device stores the output values in reg_set,
not reg_dat.
Supply the flag BGPIOF_READ_OUTPUT_REG_SET to bgpio_init() so that the
generic driver reads the correct register.
Andy Shevchenko [Tue, 1 Feb 2022 15:27:55 +0000 (17:27 +0200)]
gpiolib: Never return internal error codes to user space
Currently it's possible that character device interface may return
the error codes which are not supposed to be seen by user space.
In this case it's EPROBE_DEFER.
Wrap it to return -ENODEV instead as sysfs does.
Fixes: d7c51b47ac11 ("gpio: userspace ABI for reading/writing GPIO lines") Fixes: 61f922db7221 ("gpio: userspace ABI for reading GPIO line events") Fixes: 3c0d9c635ae2 ("gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and GPIO_V2_LINE_GET_VALUES_IOCTL") Reported-by: Suresh Balakrishnan <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]>
Michael Walle [Mon, 7 Feb 2022 18:46:52 +0000 (19:46 +0100)]
MAINTAINERS: add myself as a maintainer for the sl28cpld
The sl28cpld is a management controller found on the Kontron SMARC-sAL28
board for now. Support for it was added by me quite a while ago, but I
didn't add a MAINTAINERS entry. Add it now.
Add already used Krzysztof Kozlowski's Git tree for Samsung
S3C/S5P/Exynos ARM sub-architecture and IRC channel (#linux-exynos at
Libera). This documents purely existing state.
Arnd Bergmann [Tue, 8 Feb 2022 08:55:52 +0000 (09:55 +0100)]
Merge tag 'ti-k3-dt-fixes-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/fixes
Device Tree fixes for TI K3 platform for v5.17 merge window
* Update J721S2 platform to switch serial aliases to ttyS2.
* tag 'ti-k3-dt-fixes-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
arm64: dts: ti: k3-j721s2-common-proc-board: Alias console uart to serial2
arm64: dts: ti: k3-j721s2: Move aliases to board dts
Rob Herring [Fri, 4 Feb 2022 00:41:17 +0000 (18:41 -0600)]
ARM: dts: spear320: Drop unused and undocumented 'irq-over-gpio' property
The property 'irq-over-gpio' is both unused and undocumented. It also
happens to collide with standard *-gpio properties. As it is not needed,
drop it.
soc: aspeed: lpc-ctrl: Block error printing on probe defer cases
Add a checking code when it gets -EPROBE_DEFER while getting a clock
resource. In this case, it doesn't need to print out an error message
because the probing will be re-visited.
Arnd Bergmann [Tue, 8 Feb 2022 08:52:04 +0000 (09:52 +0100)]
Merge tag 'samsung-fixes-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/fixes
Samsung fixes for v5.17
1. Typo in CONFIG_EXYNOS_USI description.
2. Add Alim Akhtar as a reviewer for Samsung Exynos platform.
* tag 'samsung-fixes-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
soc: samsung: Fix typo in CONFIG_EXYNOS_USI description
MAINTAINERS: add reviewer entry for Samsung/Exynos platform
Arnd Bergmann [Tue, 8 Feb 2022 08:51:29 +0000 (09:51 +0100)]
Merge tag 'imx-fixes-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.17:
- Fix sound card model for MBa8Mx board.
- Drop i.MX8MQ LCDIF port node unit-address to fix DTC warning.
- Add missing SD card detect line for imx6qdl-udoo board.
- Remove MX23_PAD_SSP1_DETECT from imx23-evk hog group. It fixes the
broken SD ard support on the board.
- A couple of fixes from Martin Kepplinger to fix the MIPI_CSI port
number on i.MX8MQ.
- Re-enable ftm_alarm0 device on ls1028a-kontron-sl28 board which was
disabled accidentally.
- Fix 'assigned-clocks-parents' typo in i.MX7ULP watchdog device node.
- Disable GPU device on imx8mn-venice-gw7902 board, as it uses
MIMX8MN5CVTI SoC which does not integrate a GPU.
* tag 'imx-fixes-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mq: fix lcdif port node
arm64: dts: imx8mq-librem5: fix mipi_csi1 port number to sensor
arm64: dts: imx8mq: fix mipi_csi bidirectional port numbers
ARM: dts: imx7ulp: Fix 'assigned-clocks-parents' typo
arm64: dts: ls1028a: sl28: re-enable ftm_alarm0
arm64: dts: freescale: Fix sound card model for MBa8Mx
ARM: dts: imx23-evk: Remove MX23_PAD_SSP1_DETECT from hog group
ARM: dts: imx6qdl-udoo: Properly describe the SD card detect
arm64: dts: imx8mn-venice-gw7902: disable gpu
Arnd Bergmann [Tue, 8 Feb 2022 08:48:43 +0000 (09:48 +0100)]
Merge tag 'optee-fixes-for-v5.17' of git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes
OP-TE fixes for v5.17
- Adds error checking in optee_ffa_do_call_with_arg()
- Reintroduces an accidentally lost fix for a memref size check
- Uses bitmap_free() to free memory obtained with bitmap_zalloc()
* tag 'optee-fixes-for-v5.17' of git://git.linaro.org/people/jens.wiklander/linux-tee:
optee: add error checks in optee_ffa_do_call_with_arg()
tee: optee: do not check memref size on return from Secure World
optee: Use bitmap_free() to free bitmap
This device is a CF card, or possibly an SSD in CF form factor.
It supports NCQ and high speed DMA.
While it also advertises TRIM support, I/O errors are reported
when the discard mount option fstrim is used. TRIM also fails
when disabling NCQ and not just as an NCQ command.
Damien Le Moal [Tue, 8 Feb 2022 06:16:09 +0000 (15:16 +0900)]
ata: sata_fsl: fix sscanf() and sysfs_emit() format strings
Use the %u format for unsigned int parameters handling with sscanf() and
sysfs_emit() to avoid compilation warnings. In
fsl_sata_rx_watermark_store(), the call to sscanf() to parse a single
argument is replaced with a call to kstrtouint().
While at it, also replace the printk(KERN_ERR) calls with dev_err()
calls and fix blank lines in fsl_sata_rx_watermark_store().
James Smart [Mon, 7 Feb 2022 18:04:42 +0000 (10:04 -0800)]
scsi: lpfc: Reduce log messages seen after firmware download
Messages around firmware download were incorrectly tagged as being related
to discovery trace events. Thus, firmware download status ended up dumping
the trace log as well as the firmware update message. As there were a
couple of log messages in this state, the trace log was dumped multiple
times.
Resolve this by converting from trace events to SLI events.
James Smart [Mon, 7 Feb 2022 18:05:16 +0000 (10:05 -0800)]
scsi: lpfc: Remove NVMe support if kernel has NVME_FC disabled
The driver is initiating NVMe PRLIs to determine device NVMe support. This
should not be occurring if CONFIG_NVME_FC support is disabled.
Correct this by changing the default value for FC4 support. Currently it
defaults to FCP and NVMe. With change, when NVME_FC support is not enabled
in the kernel, the default value is just FCP.
Makefile.extrawarn: Move -Wunaligned-access to W=1
-Wunaligned-access is a new warning in clang that is default enabled for
arm and arm64 under certain circumstances within the clang frontend (see
LLVM commit below). On v5.17-rc2, an ARCH=arm allmodconfig build shows
1284 total/70 unique instances of this warning (most of the instances
are in header files), which is quite noisy.
To keep a normal build green through CONFIG_WERROR, only show this
warning with W=1, which will allow automated build systems to catch new
instances of the warning so that the total number can be driven down to
zero eventually since catching unaligned accesses at compile time would
be generally useful.
Brenda Streiff [Fri, 28 Jan 2022 22:01:28 +0000 (16:01 -0600)]
kconfig: let 'shell' return enough output for deep path names
The 'shell' built-in only returns the first 256 bytes of the command's
output. In some cases, 'shell' is used to return a path; by bumping up
the buffer size to 4096 this lets us capture up to PATH_MAX.
The specific case where I ran into this was due to commit 1e860048c53e
("gcc-plugins: simplify GCC plugin-dev capability test"). After this
change, we now use `$(shell,$(CC) -print-file-name=plugin)` to return
a path; if the gcc path is particularly long, then the path ends up
truncated at the 256 byte mark, which makes the HAVE_GCC_PLUGINS
depends test always fail.
It is mandatory for a software to issue a reset upon modifying RGMII
Receive Timing Control and RGMII Transmit Timing Control bit fields of MAC
Specific Control register 2 (page 2, register 21) otherwise the changes
won't be perceived by the PHY (the same is applicable for a lot of other
registers). Not setting the RGMII delays on the platforms that imply it'
being done on the PHY side will consequently cause the traffic loss. We
discovered that the denoted soft-reset is missing in the
m88e1121_config_aneg() method for the case if the RGMII delays are
modified but the MDIx polarity isn't changed or the auto-negotiation is
left enabled, thus causing the traffic loss on our platform with Marvell
Alaska 88E1510 installed. Let's fix that by issuing the soft-reset if the
delays have been actually set in the m88e1121_config_aneg_rgmii_delays()
method.
Linus Torvalds [Mon, 7 Feb 2022 23:25:50 +0000 (15:25 -0800)]
Merge tag '5.17-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull ksmbd server fixes from Steve French:
- NTLMSSP authentication improvement
- RDMA (smbdirect) fix allowing broader set of NICs to be supported
- improved buffer validation
- additional small fixes, including a posix extensions fix for stable
* tag '5.17-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: add support for key exchange
ksmbd: reduce smb direct max read/write size
ksmbd: don't align last entry offset in smb2 query directory
ksmbd: fix same UniqueId for dot and dotdot entries
ksmbd: smbd: validate buffer descriptor structures
ksmbd: fix SMB 3.11 posix extension mount failure
After commit e3728b50cd9b ("ACPI: PM: s2idle: Avoid possible race
related to the EC GPE") wakeup interrupts occurring immediately after
the one discarded by acpi_s2idle_wake() may be missed. Moreover, if
the SCI triggers again immediately after the rearming in
acpi_s2idle_wake(), that wakeup may be missed too.
The problem is that pm_system_irq_wakeup() only calls pm_system_wakeup()
when pm_wakeup_irq is 0, but that's not the case any more after the
interrupt causing acpi_s2idle_wake() to run until pm_wakeup_irq is
cleared by the pm_wakeup_clear() call in s2idle_loop(). However,
there may be wakeup interrupts occurring in that time frame and if
that happens, they will be missed.
To address that issue first move the clearing of pm_wakeup_irq to
the point at which it is known that the interrupt causing
acpi_s2idle_wake() to tun will be discarded, before rearming the SCI
for wakeup. Moreover, because that only reduces the size of the
time window in which the issue may manifest itself, allow
pm_system_irq_wakeup() to register two second wakeup interrupts in
a row and, when discarding the first one, replace it with the second
one. [Of course, this assumes that only one wakeup interrupt can be
discarded in one go, but currently that is the case and I am not
aware of any plans to change that.]
Fixes: e3728b50cd9b ("ACPI: PM: s2idle: Avoid possible race related to the EC GPE") Cc: 5.4+ <[email protected]> # 5.4+ Signed-off-by: Rafael J. Wysocki <[email protected]>
ACPI: PM: s2idle: Cancel wakeup before dispatching EC GPE
Commit 4a9af6cac050 ("ACPI: EC: Rework flushing of EC work while
suspended to idle") made acpi_ec_dispatch_gpe() check
pm_wakeup_pending(), but that is before canceling the SCI wakeup,
so pm_wakeup_pending() is always true. This causes the loop in
acpi_ec_dispatch_gpe() to always terminate after one iteration which
may not be correct.
Address this issue by canceling the SCI wakeup earlier, from
acpi_ec_dispatch_gpe() itself.
Fixes: 4a9af6cac050 ("ACPI: EC: Rework flushing of EC work while suspended to idle") Signed-off-by: Rafael J. Wysocki <[email protected]>
ACPI: PM: Revert "Only mark EC GPE for wakeup on Intel systems"
Testing on various upcoming OEM systems shows commit 7b167c4cb48e ("ACPI:
PM: Only mark EC GPE for wakeup on Intel systems") was short
sighted and the symptoms were indicative of other problems. Some OEMs
do have the dedicated GPIOs for the power button but also rely upon
an interrupt to the EC SCI to let the lid work.
The original commit showed spurious activity on Lenovo systems:
* On both Lenovo T14 and P14s the keyboard wakeup doesn't work, and
sometimes the power button event doesn't work.
This was confirmed on my end at that time.
However further development in the kernel showed that the issue was
actually the IRQ for the GPIO controller was also shared with the EC SCI.
This was actually fixed by commit 2d54067fcd23 ("pinctrl: amd: Fix
wakeups when IRQ is shared with SCI").
The original commit also showed problems with AC adapter:
* On HP 635 G7 detaching or attaching AC during suspend will cause
the system not to wakeup
* On Asus vivobook to prevent detaching AC causing resume problems
* On Lenovo 14ARE05 to prevent detaching AC causing resume problems
* On HP ENVY x360 to prevent detaching AC causing resume problems
Detaching AC adapter causing problems appears to have been a problem
because the EC SCI went off to notify the OS of the power adapter change
but the SCI was ignored and there was no other way to wake up this system
since GPIO controller wasn't properly enabled. The wakeups were fixed by
enabling the GPIO controller in commit acd47b9f28e5 ("pinctrl: amd: Handle
wake-up interrupt").
I've confirmed on a variety of OEM notebooks with the following test
1) echo 1 | sudo tee /sys/power/pm_debug_messages
2) sudo systemctl suspend
3) unplug AC adapter, make sure system is still asleep
4) wake system from lid (which is provided by ACPI SCI on some of them)
5) dmesg
a) see the EC GPE dispatched, timekeeping for X seconds (matching ~time
until AC adapter plug out)
b) see timekeeping for Y seconds until woke (matching ~time from AC
adapter until lid event)
6) Look at /sys/kernel/debug/amd_pmc/s0ix_stats
"Time (in us) in S0i3" = X + Y - firmware processing time
* tag 'mmc-v5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
moxart: fix potential use-after-free on remove path
mmc: core: Wait for command setting 'Power Off Notification' bit to complete
mmc: sh_mmcif: Check for null res pointer
mmc: sdhci-of-esdhc: Check for error num after setting mask
Michael Kelley [Sun, 6 Feb 2022 19:36:56 +0000 (11:36 -0800)]
Drivers: hv: vmbus: Rework use of DMA_BIT_MASK(64)
Using DMA_BIT_MASK(64) as an initializer for a global variable
causes problems with Clang 12.0.1. The compiler doesn't understand
that value 64 is excluded from the shift at compile time, resulting
in a build error.
While this is a compiler problem, avoid the issue by setting up
the dma_mask memory as part of struct hv_device, and initialize
it using dma_set_mask().
Linus Torvalds [Mon, 7 Feb 2022 17:55:14 +0000 (09:55 -0800)]
Merge tag 'integrity-v5.17-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity fixes from Mimi Zohar:
"Fixes for recently found bugs.
One was found/noticed while reviewing IMA support for fsverity digests
and signatures. Two of them were found/noticed while working on IMA
namespacing. Plus two other bugs.
All of them are for previous kernel releases"
* tag 'integrity-v5.17-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Do not print policy rule with inactive LSM labels
ima: Allow template selection with ima_template[_fmt]= after ima_hash=
ima: Remove ima_policy file before directory
integrity: check the return value of audit_log_start()
ima: fix reference leak in asymmetric_verify()
Arnd Bergmann [Mon, 7 Feb 2022 16:42:43 +0000 (17:42 +0100)]
Merge tag 'omap-for-v5.17/fixes-for-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps
A series of fixes for omap variants for minor issues, and a fix for a timer
regression for some omap3 beagleboard versions.
The timer fix needs to patch both the dts and the timer code because
otherwise the timer quirk handling for old dtbs will prevent the dts fix
from working.
The other changes are for issues found by automated analysis, a macasp
typo fix, and two cosmetic fixes for clocks.
* tag 'omap-for-v5.17/fixes-for-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Don't use legacy clock defines for dra7 clkctrl
clk: ti: Move dra7 clock devices out of the legacy section
ARM: dts: Fix timer regression for beagleboard revision c
ARM: dts: am335x-wega: Fix typo in mcasp property rx-num-evt
ARM: OMAP2+: adjust the location of put_device() call in omapdss_init_of
ARM: OMAP2+: hwmod: Add of_node_put() before break
Shakeel Butt [Tue, 25 Jan 2022 05:17:36 +0000 (21:17 -0800)]
mm: io_uring: allow oom-killer from io_uring_setup
On an overcommitted system which is running multiple workloads of
varying priorities, it is preferred to trigger an oom-killer to kill a
low priority workload than to let the high priority workload receiving
ENOMEMs. On our memory overcommitted systems, we are seeing a lot of
ENOMEMs instead of oom-kills because io_uring_setup callchain is using
__GFP_NORETRY gfp flag which avoids the oom-killer. Let's remove it and
allow the oom-killer to kill a lower priority job.
io_uring: Clean up a false-positive warning from GCC 9.3.0
In io_recv(), if import_single_range() fails, the @flags variable is
uninitialized, then it will goto out_free.
After the goto, the compiler doesn't know that (ret < min_ret) is
always true, so it thinks the "if ((flags & MSG_WAITALL) ..." path
could be taken.
The complaint comes from gcc-9 (Debian 9.3.0-22) 9.3.0:
```
fs/io_uring.c:5238 io_recvfrom() error: uninitialized symbol 'flags'
```
Fix this by bypassing the @ret and @flags check when
import_single_range() fails.
Reasons:
1. import_single_range() only returns -EFAULT when it fails.
2. At that point, @flags is uninitialized and shouldn't be read.
Andy Shevchenko [Mon, 7 Feb 2022 15:16:39 +0000 (17:16 +0200)]
parisc: Add ioread64_lo_hi() and iowrite64_lo_hi()
It's a followup to the previous commit f15309d7ad5d ("parisc: Add
ioread64_hi_lo() and iowrite64_hi_lo()") which does only half of
the job. Add the rest, so we won't get a new kernel test robot
reports.
Fixes: f15309d7ad5d ("parisc: Add ioread64_hi_lo() and iowrite64_hi_lo()") Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: Helge Deller <[email protected]>
Damien Le Moal [Mon, 7 Feb 2022 02:27:53 +0000 (11:27 +0900)]
ata: libata-core: Fix ata_dev_config_cpr()
The concurrent positioning ranges log page 47h is a general purpose log
page and not a subpage of the indentify device log. Using
ata_identify_page_supported() to test for concurrent positioning ranges
support is thus wrong. ata_log_supported() must be used.
Furthermore, unlike other advanced ATA features (e.g. NCQ priority),
accesses to the concurrent positioning ranges log page are not gated by
a feature bit from the device IDENTIFY data. Since many older drives
react badly to the READ LOG EXT and/or READ LOG DMA EXT commands isued
to read device log pages, avoid problems with older drives by limiting
the concurrent positioning ranges support detection to drives
implementing at least the ACS-4 ATA standard (major version 11). This
additional condition effectively turns ata_dev_config_cpr() into a nop
for older drives, avoiding problems in the field.
Ville Syrjälä [Fri, 4 Feb 2022 14:18:18 +0000 (16:18 +0200)]
drm/i915: Workaround broken BIOS DBUF configuration on TGL/RKL
On TGL/RKL the BIOS likes to use some kind of bogus DBUF layout
that doesn't match what the spec recommends. With a single active
pipe that is not going to be a problem, but with multiple pipes
active skl_commit_modeset_enables() goes into an infinite loop
since it can't figure out any order in which it can commit the
pipes without causing DBUF overlaps between the planes.
We'd need some kind of extra DBUF defrag stage in between to
make the transition possible. But that is clearly way too complex
a solution, so in the name of simplicity let's just sanitize the
DBUF state by simply turning off all planes when we detect a
pipe encroaching on its neighbours' DBUF slices. We only have
to disable the primary planes as all other planes should have
already been disabled (if they somehow were enabled) by
earlier sanitization steps.
And for good measure let's also sanitize in case the DBUF
allocations of the pipes already seem to overlap each other.
Ville Syrjälä [Fri, 4 Feb 2022 14:18:17 +0000 (16:18 +0200)]
drm/i915: Populate pipe dbuf slices more accurately during readout
During readout we cannot assume the planes are actually using the
slices they are supposed to use. The BIOS may have misprogrammed
things and put the planes onto the wrong dbuf slices. So let's
do the readout more carefully to make sure we really know which
dbuf slices are actually in use by the pipe at the time.
Ville Syrjälä [Fri, 4 Feb 2022 14:18:16 +0000 (16:18 +0200)]
drm/i915: Allow !join_mbus cases for adlp+ dbuf configuration
Reintroduce the !join_mbus single pipe cases for adlp+.
Due to the mbus relative dbuf offsets in PLANE_BUF_CFG we
need to know the actual slices used by the pipe when doing
readout, even when mbus joining isn't enabled. Accurate
readout will be needed to properly sanitize invalid BIOS
dbuf configurations.
This will also make it much easier to play around with the
!join_mbus configs for testin/workaround purposes.
Lucas De Marchi [Mon, 31 Jan 2022 16:59:25 +0000 (08:59 -0800)]
drm/i915: Fix header test for !CONFIG_X86
Architectures others than x86 have a stub implementation calling
WARN_ON_ONCE(). The appropriate headers need to be included, otherwise
the header-test target will fail with:
HDRTEST drivers/gpu/drm/i915/i915_mm.h
In file included from <command-line>:
./drivers/gpu/drm/i915/i915_mm.h: In function ‘remap_io_mapping’:
./drivers/gpu/drm/i915/i915_mm.h:26:2: error: implicit declaration of function ‘WARN_ON_ONCE’ [-Werror=implicit-function-declaration]
26 | WARN_ON_ONCE(1);
| ^~~~~~~~~~~~
v2: Do not include <linux/printk.h> since call to pr_err() has been
removed
drm/i915/ttm: Return some errors instead of trying memcpy move
The i915_ttm_accel_move() function may return error codes that should
be propagated further up the stack rather than consumed assuming that
the accel move failed and could be replaced with a memcpy move.
For -EINTR, -ERESTARTSYS and -EAGAIN, just propagate those codes, rather
than retrying with a memcpy move.
Ville Syrjälä [Fri, 28 Jan 2022 10:37:50 +0000 (12:37 +0200)]
drm/i915: Disable DRRS on IVB/HSW port != A
Currently we allow DRRS on IVB PCH ports, but we're missing a
few programming steps meaning it is guaranteed to not work.
And on HSW DRRS is not supported on anything but port A ever
as only transcoder EDP has the M2/N2 registers (though I'm
not sure if HSW ever has eDP on any other port).
Starting from BDW all transcoders have the dynamically
reprogrammable M/N registers so DRRS could work on any
port.
Stop initializing DRRS on ports where it cannot possibly work.
Eric Dumazet [Sun, 6 Feb 2022 14:33:48 +0000 (06:33 -0800)]
net/smc: use GFP_ATOMIC allocation in smc_pnet_add_eth()
My last patch moved the netdev_tracker_alloc() call to a section
protected by a write_lock().
I should have replaced GFP_KERNEL with GFP_ATOMIC to avoid the infamous:
BUG: sleeping function called from invalid context at include/linux/sched/mm.h:256
Fixes: 28f922213886 ("net/smc: fix ref_tracker issue in smc_pnet_add()") Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
The SocFPGA machine since commit b3ca9888f35f ("reset: socfpga: add an
early reset driver for SoCFPGA") uses reset controller, so it should
select RESET_CONTROLLER explicitly. Selecting ARCH_HAS_RESET_CONTROLLER
is not enough because it affects only default choice still allowing a
non-buildable configuration:
/usr/bin/arm-linux-gnueabi-ld: arch/arm/mach-socfpga/socfpga.o: in function `socfpga_init_irq':
arch/arm/mach-socfpga/socfpga.c:56: undefined reference to `socfpga_reset_init'
MAINTAINERS: downgrade myself to Reviewer for s390
Now that Alexander Gordeev has volunteered to be a co-maintainer for
s390, I can act as a reviewer instead of being a maintainer for s390.
With Alexander, Heiko, and Vasily we are in really good shape.
I will continue to act as the maintainer for KVM on s390 together with
Janosch.
Song Liu [Fri, 4 Feb 2022 00:40:57 +0000 (16:40 -0800)]
perf: Fix list corruption in perf_cgroup_switch()
There's list corruption on cgrp_cpuctx_list. This happens on the
following path:
perf_cgroup_switch: list_for_each_entry(cgrp_cpuctx_list)
cpu_ctx_sched_in
ctx_sched_in
ctx_pinned_sched_in
merge_sched_in
perf_cgroup_event_disable: remove the event from the list
Use list_for_each_entry_safe() to allow removing an entry during
iteration.
Tadeusz Struk [Thu, 3 Feb 2022 16:18:46 +0000 (08:18 -0800)]
sched/fair: Fix fault in reweight_entity
Syzbot found a GPF in reweight_entity. This has been bisected to
commit 4ef0c5c6b5ba ("kernel/sched: Fix sched_fork() access an invalid
sched_task_group")
There is a race between sched_post_fork() and setpriority(PRIO_PGRP)
within a thread group that causes a null-ptr-deref in
reweight_entity() in CFS. The scenario is that the main process spawns
number of new threads, which then call setpriority(PRIO_PGRP, 0, -20),
wait, and exit. For each of the new threads the copy_process() gets
invoked, which adds the new task_struct and calls sched_post_fork()
for it.
In the above scenario there is a possibility that
setpriority(PRIO_PGRP) and set_one_prio() will be called for a thread
in the group that is just being created by copy_process(), and for
which the sched_post_fork() has not been executed yet. This will
trigger a null pointer dereference in reweight_entity(), as it will
try to access the run queue pointer, which hasn't been set.
Before the mentioned change the cfs_rq pointer for the task has been
set in sched_fork(), which is called much earlier in copy_process(),
before the new task is added to the thread_group. Now it is done in
the sched_post_fork(), which is called after that. To fix the issue
the remove the update_load param from the update_load param() function
and call reweight_task() only if the task flag doesn't have the
TASK_NEW flag set.
Linus Torvalds [Sun, 6 Feb 2022 18:34:45 +0000 (10:34 -0800)]
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Various bug fixes for ext4 fast commit and inline data handling.
Also fix regression introduced as part of moving to the new mount API"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
fs/ext4: fix comments mentioning i_mutex
ext4: fix incorrect type issue during replay_del_range
jbd2: fix kernel-doc descriptions for jbd2_journal_shrink_{scan,count}()
ext4: fix potential NULL pointer dereference in ext4_fill_super()
jbd2: refactor wait logic for transaction updates into a common function
jbd2: cleanup unused functions declarations from jbd2.h
ext4: fix error handling in ext4_fc_record_modified_inode()
ext4: remove redundant max inline_size check in ext4_da_write_inline_data_begin()
ext4: fix error handling in ext4_restore_inline_data()
ext4: fast commit may miss file actions
ext4: fast commit may not fallback for ineligible commit
ext4: modify the logic of ext4_mb_new_blocks_simple
ext4: prevent used blocks from being allocated during fast commit replay
Linus Torvalds [Sun, 6 Feb 2022 18:18:23 +0000 (10:18 -0800)]
Merge tag 'perf-tools-fixes-for-v5.17-2022-02-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix display of grouped aliased events in 'perf stat'.
- Add missing branch_sample_type to perf_event_attr__fprintf().
- Apply correct label to user/kernel symbols in branch mode.
- Fix 'perf ftrace' system_wide tracing, it has to be set before
creating the maps.
- Return error if procfs isn't mounted for PID namespaces when
synthesizing records for pre-existing processes.
- Set error stream of objdump process for 'perf annotate' TUI, to avoid
garbling the screen.
- Add missing arm64 support to perf_mmap__read_self(), the kernel part
got into 5.17.
- Check for NULL pointer before dereference writing debug info about a
sample.
- Update UAPI copies for asound, perf_event, prctl and kvm headers.
- Fix a typo in bpf_counter_cgroup.c.
* tag 'perf-tools-fixes-for-v5.17-2022-02-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf ftrace: system_wide collection is not effective by default
libperf: Add arm64 support to perf_mmap__read_self()
tools include UAPI: Sync sound/asound.h copy with the kernel sources
perf stat: Fix display of grouped aliased events
perf tools: Apply correct label to user/kernel symbols in branch mode
perf bpf: Fix a typo in bpf_counter_cgroup.c
perf synthetic-events: Return error if procfs isn't mounted for PID namespaces
perf session: Check for NULL pointer before dereference
perf annotate: Set error stream of objdump process for TUI
perf tools: Add missing branch_sample_type to perf_event_attr__fprintf()
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers UAPI: Sync linux/prctl.h with the kernel sources
perf beauty: Make the prctl arg regexp more strict to cope with PR_SET_VMA
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync linux/perf_event.h with the kernel sources
tools include UAPI: Sync sound/asound.h copy with the kernel sources
Linus Torvalds [Sun, 6 Feb 2022 18:11:14 +0000 (10:11 -0800)]
Merge tag 'perf_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Intel/PT: filters could crash the kernel
- Intel: default disable the PMU for SMM, some new-ish EFI firmware has
started using CPL3 and the PMU CPL filters don't discriminate against
SMM, meaning that CPL3 (userspace only) events now also count EFI/SMM
cycles.
- Fixup for perf_event_attr::sig_data
* tag 'perf_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/pt: Fix crash with stop filters in single-range mode
perf: uapi: Document perf_event_attr::sig_data truncation on 32 bit architectures
selftests/perf_events: Test modification of perf_event_attr::sig_data
perf: Copy perf_event_attr::sig_data on modification
x86/perf: Default set FREEZE_ON_SMI for all
Linus Torvalds [Sun, 6 Feb 2022 17:57:39 +0000 (09:57 -0800)]
Merge tag 'edac_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
"Fix altera and xgene EDAC drivers to propagate the correct error code
from platform_get_irq() so that deferred probing still works"
* tag 'edac_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/xgene: Fix deferred probing
EDAC/altera: Fix deferred probing
Slark Xiao [Sat, 5 Feb 2022 13:57:31 +0000 (19:27 +0530)]
bus: mhi: pci_generic: Add mru_default for Cinterion MV31-W
For default mechanism, product would use default MRU 3500 if
they didn't define it. But for Cinterion MV31-W, there is a known
issue which MRU 3500 would lead to data connection lost.
So we align it with Qualcomm default MRU settings.
Slark Xiao [Sat, 5 Feb 2022 13:57:30 +0000 (19:27 +0530)]
bus: mhi: pci_generic: Add mru_default for Foxconn SDX55
For default mechanism, product would use default MRU 3500 if
they didn't define it. But for Foxconn SDX55, there is a known
issue which MRU 3500 would lead to data connection lost.
So we align it with Qualcomm default MRU settings.
Rob Herring [Tue, 1 Feb 2022 21:40:56 +0000 (15:40 -0600)]
libperf: Add arm64 support to perf_mmap__read_self()
Add the arm64 variants for read_perf_counter() and read_timestamp().
Unfortunately the counter number is encoded into the instruction, so the
code is a bit verbose to enumerate all possible counters.
Which entails no changes in the tooling side as it doesn't introduce new
SNDRV_PCM_IOCTL_ ioctls.
To silence this perf tools build warning:
Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h'
diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h
Ian Rogers [Sat, 5 Feb 2022 01:09:41 +0000 (17:09 -0800)]
perf stat: Fix display of grouped aliased events
An event may have a number of uncore aliases that when added to the
evlist are consecutive.
If there are multiple uncore events in a group then
parse_events__set_leader_for_uncore_aliase will reorder the evlist so
that events on the same PMU are adjacent.
The collect_all_aliases function assumes that aliases are in blocks so
that only the first counter is printed and all others are marked merged.
The reordering for groups breaks the assumption and so all counts are
printed.
This change removes the assumption from collect_all_aliases
that the events are in blocks and instead processes the entire evlist.
Before:
```
$ perf stat -e '{UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE,UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE},duration_time' -a -A -- sleep 1
Leo Yan [Fri, 24 Dec 2021 12:40:13 +0000 (20:40 +0800)]
perf synthetic-events: Return error if procfs isn't mounted for PID namespaces
For perf recording, it retrieves process info by iterating nodes in proc
fs. If we run perf in a non-root PID namespace with command:
# unshare --fork --pid perf record -e cycles -a -- test_program
... in this case, unshare command creates a child PID namespace and
launches perf tool in it, but the issue is the proc fs is not mounted
for the non-root PID namespace, this leads to the perf tool gathering
process info from its parent PID namespace.
We can use below command to observe the process nodes under proc fs:
So it shows many existed tasks, since unshared command has not mounted
the proc fs for the new created PID namespace, it still accesses the
proc fs of the root PID namespace. This leads to two prominent issues:
- Firstly, PID values are mismatched between thread info and samples.
The gathered thread info are coming from the proc fs of the root PID
namespace, but samples record its PID from the child PID namespace.
- The second issue is profiled program 'test_program' returns its forked
PID number from the child PID namespace, perf tool wrongly uses this
PID number to retrieve the process info via the proc fs of the root
PID namespace.
To avoid issues, we need to mount proc fs for the child PID namespace
with the option '--mount-proc' when use unshare command:
# unshare --fork --pid --mount-proc perf record -e cycles -a -- test_program
Conversely, when the proc fs of the root PID namespace is used by child
namespace, perf tool can detect the multiple PID levels and
nsinfo__is_in_root_namespace() returns false, this patch reports error
for this case:
# unshare --fork --pid perf record -e cycles -a -- test_program
Couldn't synthesize bpf events.
Perf runs in non-root PID namespace but it tries to gather process info from its parent PID namespace.
Please mount the proc file system properly, e.g. add the option '--mount-proc' for unshare command.
tools headers UAPI: Sync linux/kvm.h with the kernel sources
To pick the changes in:
f6c6804c43fa18d3 ("kvm: Move KVM_GET_XSAVE2 IOCTL definition at the end of kvm.h")
That just rebuilds perf, as these patches don't add any new KVM ioctl to
be harvested for the the 'perf trace' ioctl syscall argument
beautifiers.
This is also by now used by tools/testing/selftests/kvm/, a simple test
build succeeded.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Fixes: b60645248af3 ("net/smc: add net device tracker to struct smc_pnetentry") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
net: phy: marvell: Fix MDI-x polarity setting in 88e1118-compatible PHYs
When setting up autonegotiation for 88E1118R and compatible PHYs,
a software reset of PHY is issued before setting up polarity.
This is incorrect as changes of MDI Crossover Mode bits are
disruptive to the normal operation and must be followed by a
software reset to take effect. Let's patch m88e1118_config_aneg()
to fix the issue mentioned before by invoking software reset
of the PHY just after setting up MDI-x polarity.
drm/panel: simple: Assign data from panel_dpi_probe() correctly
In the function panel_simple_probe() the pointer panel->desc is
assigned to the passed pointer desc. If function panel_dpi_probe()
is called panel->desc will be updated, but further on only desc
will be evaluated. So update the desc pointer to be able to use
the data from the function panel_dpi_probe().
Linus Torvalds [Sat, 5 Feb 2022 17:55:59 +0000 (09:55 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- A couple of fixes when handling an exception while a SError has
been delivered
- Workaround for Cortex-A510's single-step erratum
RISC-V:
- Make CY, TM, and IR counters accessible in VU mode
- Fix SBI implementation version
x86:
- Report deprecation of x87 features in supported CPUID
- Preparation for fixing an interrupt delivery race on AMD hardware
- Sparse fix
All except POWER and s390:
- Rework guest entry code to correctly mark noinstr areas and fix
vtime' accounting (for x86, this was already mostly correct but not
entirely; for ARM, MIPS and RISC-V it wasn't)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Use ERR_PTR_USR() to return -EFAULT as a __user pointer
KVM: x86: Report deprecated x87 features in supported CPUID
KVM: arm64: Workaround Cortex-A510's single-step and PAC trap errata
KVM: arm64: Stop handle_exit() from handling HVC twice when an SError occurs
KVM: arm64: Avoid consuming a stale esr value when SError occur
RISC-V: KVM: Fix SBI implementation version
RISC-V: KVM: make CY, TM, and IR counters accessible in VU mode
kvm/riscv: rework guest entry logic
kvm/arm64: rework guest entry logic
kvm/x86: rework guest entry logic
kvm/mips: rework guest entry logic
kvm: add guest_state_{enter,exit}_irqoff()
KVM: x86: Move delivery of non-APICv interrupt into vendor code
kvm: Move KVM_GET_XSAVE2 IOCTL definition at the end of kvm.h
Linus Torvalds [Sat, 5 Feb 2022 17:21:55 +0000 (09:21 -0800)]
Merge tag 'xfs-5.17-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"I was auditing operations in XFS that clear file privileges, and
realized that XFS' fallocate implementation drops suid/sgid but
doesn't clear file capabilities the same way that file writes and
reflink do.
There are VFS helpers that do it correctly, so refactor XFS to use
them. I also noticed that we weren't flushing the log at the correct
point in the fallocate operation, so that's fixed too.
Summary:
- Fix fallocate so that it drops all file privileges when files are
modified instead of open-coding that incompletely.
- Fix fallocate to flush the log if the caller wanted synchronous
file updates"
* tag 'xfs-5.17-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: ensure log flush at the end of a synchronous fallocate call
xfs: move xfs_update_prealloc_flags() to xfs_pnfs.c
xfs: set prealloc flag in xfs_alloc_file_space()
xfs: fallocate() should call file_modified()
xfs: remove XFS_PREALLOC_SYNC
xfs: reject crazy array sizes being fed to XFS_IOC_GETBMAP*
Linus Torvalds [Sat, 5 Feb 2022 17:13:51 +0000 (09:13 -0800)]
Merge tag 'vfs-5.17-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull vfs fixes from Darrick Wong:
"I was auditing the sync_fs code paths recently and noticed that most
callers of ->sync_fs ignore its return value (and many implementations
never return nonzero even if the fs is broken!), which means that
internal fs errors and corruption are not passed up to userspace
callers of syncfs(2) or FIFREEZE. Hence fixing the common code and
XFS, and I'll start working on the ext4/btrfs folks if this is merged.
Summary:
- Fix a bug where callers of ->sync_fs (e.g. sync_filesystem and
syncfs(2)) ignore the return value.
- Fix a bug where callers of sync_filesystem (e.g. fs freeze) ignore
the return value.
- Fix a bug in XFS where xfs_fs_sync_fs never passed back error
returns"
* tag 'vfs-5.17-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: return errors in xfs_fs_sync_fs
quota: make dquot_quota_sync return errors from ->sync_fs
vfs: make sync_filesystem return errors from ->sync_fs
vfs: make freeze_super abort when sync_filesystem returns error
Linus Torvalds [Sat, 5 Feb 2022 17:04:43 +0000 (09:04 -0800)]
Merge tag 'iomap-5.17-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap fix from Darrick Wong:
"A single bugfix for iomap.
The fix should eliminate occasional complaints about stall warnings
when a lot of writeback IO completes all at once and we have to then
go clearing status on a large number of folios.
Summary:
- Limit the length of ioend chains in writeback so that we don't trip
the softlockup watchdog and to limit long tail latency on clearing
PageWriteback"
* tag 'iomap-5.17-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs, iomap: limit individual ioend chain lengths in writeback
projects / linux.git / log