ixgbe: Fix skb list corruption on Power systems

This patch fixes an issue seen on Power systems with ixgbe which results
in skb list corruption and an eventual kernel oops. The following is what
was observed:

CPU 1                                   CPU2
============================            ============================
1: ixgbe_xmit_frame_ring                ixgbe_clean_tx_irq
2:  first->skb = skb                     eop_desc = tx_buffer->next_to_watch
3:  ixgbe_tx_map                         read_barrier_depends()
4:   wmb                                 check adapter written status bit
5:   first->next_to_watch = tx_desc      napi_consume_skb(tx_buffer->skb ..);
6:   writel(i, tx_ring->tail);

The read_barrier_depends is insufficient to ensure that tx_buffer->skb does not
get loaded prior to tx_buffer->next_to_watch, which then results in loading
a stale skb pointer. This patch replaces the read_barrier_depends with
smp_rmb to ensure loads are ordered with respect to the load of
tx_buffer->next_to_watch.

Cc: stable <[email protected]>
Signed-off-by: Brian King <[email protected]>
Acked-by: Jesse Brandeburg <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>

i40e: restore promiscuous after reset

After a reset we rebuild the VSIs which is going to clobber any
promiscuous settings we had before reset.  This makes it so that we
restore the promiscuous settings we had before reset.

Signed-off-by: Alan Brady <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>

i40evf: fix client notify of l2 params

The current method for notifying clients of l2 parameters is broken
because we fail to copy the new parameters to the client instance
struct, we need to do the notification before the client 'open' function
pointer gets called, and lastly we should set the l2 parameters when
first adding a client instance.

This patch first introduces the i40evf_client_get_params function to
prevent code duplication in the i40evf_client_add_instance and the
i40evf_notify_client_l2_params functions.  We then fix the notify l2
params function to actually copy the parameters to client instance
struct and do the same in the *_add_instance' function.  Lastly this
patch reorganizes the priority in which client tasks fire so that if the
flag for notifying l2 params is set, it will trigger before the open
because the client needs these new parameters as part of a client open
task.

Signed-off-by: Alan Brady <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>

i40e: Fix FLR reset timeout issue

This patch allows detection of upcoming core reset in case NIC gets
stuck while performing FLR reset. The i40e_pf_reset() function returns
I40E_ERR_NOT_READY when global reset was detected.

Signed-off-by: Filip Sadowski <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>

i40e: Remove limit of 64 max queues per channel

It is safe to remove the upper limit of 64 queues on a channel
VSI. The upper bound is determined by the VSI's num_queue_pairs
and gets validated when the queue mapping info through mqprio
interface is subject to bound checking in the driver.

Signed-off-by: Amritha Nambiar <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>

i40e: fix the calculation of VFs mac addresses

num_mac should be increased only after the call to i40e_add_mac_filter().

Fixes: 5f527ba962e2 ("i40e: Limit the number of MAC and VLAN addresses that can be added for VFs")
Signed-off-by: Zijie Pan <[email protected]>
Signed-off-by: Nicolas Dichtel <[email protected]>
Reviewed-by: Tushar Dave <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>

i40e: Fix for NUP NVM image downgrade failure

Since commit 96a39aed25e6 ("i40e: Acquire NVM lock before
reads on all devices") we've used the NVM lock
to synchronize NVM reads even on devices which don't strictly
need the lock.

Doing so can cause a regression on older firmware prior to 1.5,
especially when downgrading the firmware.

Fix this by only grabbing the lock if we're running on an X722
device (which requires the lock as it uses the AdminQ to read
the NVM), or if we're currently running 1.5 or newer firmware.

Signed-off-by: Jacob Keller <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>

x86/mm/kasan: Don't use vmemmap_populate() to initialize shadow

[ Note, this commit is a cherry-picked version of:

    d17a1d97dc20: ("x86/mm/kasan: don't use vmemmap_populate() to initialize shadow")

  ... for easier x86 entry code testing and back-porting. ]

The KASAN shadow is currently mapped using vmemmap_populate() since that
provides a semi-convenient way to map pages into init_top_pgt.  However,
since that no longer zeroes the mapped pages, it is not suitable for
KASAN, which requires zeroed shadow memory.

Add kasan_populate_shadow() interface and use it instead of
vmemmap_populate().  Besides, this allows us to take advantage of
gigantic pages and use them to populate the shadow, which should save us
some memory wasted on page tables and reduce TLB pressure.

Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Andrey Ryabinin <[email protected]>
Signed-off-by: Pavel Tatashin <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Steven Sistare <[email protected]>
Cc: Daniel Jordan <[email protected]>
Cc: Bob Picco <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Sam Ravnborg <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>

x86/entry/64: Fix entry_SYSCALL_64_after_hwframe() IRQ tracing

When I added entry_SYSCALL_64_after_hwframe(), I left TRACE_IRQS_OFF
before it.  This means that users of entry_SYSCALL_64_after_hwframe()
were responsible for invoking TRACE_IRQS_OFF, and the one and only
user (Xen, added in the same commit) got it wrong.

I think this would manifest as a warning if a Xen PV guest with
CONFIG_DEBUG_LOCKDEP=y were used with context tracking.  (The
context tracking bit is to cause lockdep to get invoked before we
turn IRQs back on.)  I haven't tested that for real yet because I
can't get a kernel configured like that to boot at all on Xen PV.

Move TRACE_IRQS_OFF below the label.

Signed-off-by: Andy Lutomirski <[email protected]>
Cc: Boris Ostrovsky <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Juergen Gross <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Fixes: 8a9949bc71a7 ("x86/xen/64: Rearrange the SYSCALL entries")
Link: http://lkml.kernel.org/r/9150aac013b7b95d62c2336751d5b6e91d2722aa.1511325444.git.luto@kernel.org
Signed-off-by: Ingo Molnar <[email protected]>

powerpc/perf/imc: Use cpu_to_node() not topology_physical_package_id()

init_imc_pmu() uses topology_physical_package_id() to detect the
node id of the processor it is on to get local memory, but that's
wrong, and can lead to crashes. Fix it to use cpu_to_node().

Fixes: 885dcd709ba9 ("powerpc/perf: Add nest IMC PMU support")
Cc: [email protected] # v4.14+
Reported-By: Rob Lippert <[email protected]>
Tested-By: Madhavan Srinivasan <[email protected]>
Signed-off-by: Madhavan Srinivasan <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>

treewide: Remove TIMER_FUNC_TYPE and TIMER_DATA_TYPE casts

With all callbacks converted, and the timer callback prototype
switched over, the TIMER_FUNC_TYPE cast is no longer needed,
so remove it. Conversion was done with the following scripts:

    perl -pi -e 's|\(TIMER_FUNC_TYPE\)||g' \
        $(git grep TIMER_FUNC_TYPE | cut -d: -f1 | sort -u)

    perl -pi -e 's|\(TIMER_DATA_TYPE\)||g' \
        $(git grep TIMER_DATA_TYPE | cut -d: -f1 | sort -u)

The now unused macros are also dropped from include/linux/timer.h.

Signed-off-by: Kees Cook <[email protected]>

timer: Remove redundant __setup_timer*() macros

With __init_timer*() now matching __setup_timer*(), remove the redundant
internal interface, clean up the resulting definitions and add more
documentation.

Cc: Thomas Gleixner <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Lai Jiangshan <[email protected]>
Cc: Shaohua Li <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Andrew Morton <[email protected]>
Signed-off-by: Kees Cook <[email protected]>

timer: Pass function down to initialization routines

In preparation for removing more macros, pass the function down to the
initialization routines instead of doing it in macros.

Cc: Thomas Gleixner <[email protected]>
Cc: John Stultz <[email protected]>
Cc: Stephen Boyd <[email protected]>
Signed-off-by: Kees Cook <[email protected]>

timer: Remove unused data arguments from macros

With the .data field removed, the ignored data arguments in timer macros
can be removed.

Cc: Thomas Gleixner <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Lai Jiangshan <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Shaohua Li <[email protected]>
Signed-off-by: Kees Cook <[email protected]>

timer: Switch callback prototype to take struct timer_list * argument

Since all callbacks have been converted, we can switch the core
prototype to "struct timer_list *" now too.

Cc: Thomas Gleixner <[email protected]>
Cc: John Stultz <[email protected]>
Cc: Stephen Boyd <[email protected]>
Signed-off-by: Kees Cook <[email protected]>

timer: Pass timer_list pointer to callbacks unconditionally

Now that all timer callbacks are already taking their struct timer_list
pointer as the callback argument, just do this unconditionally and remove
the .data field.

Cc: Thomas Gleixner <[email protected]>
Cc: John Stultz <[email protected]>
Cc: Stephen Boyd <[email protected]>
Signed-off-by: Kees Cook <[email protected]>

Coccinelle: Remove setup_timer.cocci

Both the init_timer() and timer_setup() APIs have been removed. This
script will not be needed any more.

Signed-off-by: Kees Cook <[email protected]>

timer: Remove setup_*timer() interface

With all callers converted to timer_setup(), the old setup_*timer()
interface can be removed.

Cc: Thomas Gleixner <[email protected]>
Signed-off-by: Kees Cook <[email protected]>

timer: Remove init_timer() interface

All users of init_timer() have been updated. Remove the ancient interface.

Cc: Thomas Gleixner <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Signed-off-by: Kees Cook <[email protected]>

treewide: setup_timer() -> timer_setup() (2 field)

This converts all remaining setup_timer() calls that use a nested field
to reach a struct timer_list. Coccinelle does not have an easy way to
match multiple fields, so a new script is needed to change the matches of
"&_E->_timer" into "&_E->_field1._timer" in all the rules.

spatch --very-quiet --all-includes --include-headers \
-I ./arch/x86/include -I ./arch/x86/include/generated \
-I ./include -I ./arch/x86/include/uapi \
-I ./arch/x86/include/generated/uapi -I ./include/uapi \
-I ./include/generated/uapi --include ./include/linux/kconfig.h \
--dir . \
--cocci-file ~/src/data/timer_setup-2fields.cocci

@fix_address_of depends@
expression e;
@@

 setup_timer(
-&(e)
+&e
 , ...)

// Update any raw setup_timer() usages that have a NULL callback, but
// would otherwise match change_timer_function_usage, since the latter
// will update all function assignments done in the face of a NULL
// function initialization in setup_timer().
@change_timer_function_usage_NULL@
expression _E;
identifier _field1;
identifier _timer;
type _cast_data;
@@

(
-setup_timer(&_E->_field1._timer, NULL, _E);
+timer_setup(&_E->_field1._timer, NULL, 0);
|
-setup_timer(&_E->_field1._timer, NULL, (_cast_data)_E);
+timer_setup(&_E->_field1._timer, NULL, 0);
|
-setup_timer(&_E._field1._timer, NULL, &_E);
+timer_setup(&_E._field1._timer, NULL, 0);
|
-setup_timer(&_E._field1._timer, NULL, (_cast_data)&_E);
+timer_setup(&_E._field1._timer, NULL, 0);
)

@change_timer_function_usage@
expression _E;
identifier _field1;
identifier _timer;
struct timer_list _stl;
identifier _callback;
type _cast_func, _cast_data;
@@

(
-setup_timer(&_E->_field1._timer, _callback, _E);
+timer_setup(&_E->_field1._timer, _callback, 0);
|
-setup_timer(&_E->_field1._timer, &_callback, _E);
+timer_setup(&_E->_field1._timer, _callback, 0);
|
-setup_timer(&_E->_field1._timer, _callback, (_cast_data)_E);
+timer_setup(&_E->_field1._timer, _callback, 0);
|
-setup_timer(&_E->_field1._timer, &_callback, (_cast_data)_E);
+timer_setup(&_E->_field1._timer, _callback, 0);
|
-setup_timer(&_E->_field1._timer, (_cast_func)_callback, _E);
+timer_setup(&_E->_field1._timer, _callback, 0);
|
-setup_timer(&_E->_field1._timer, (_cast_func)&_callback, _E);
+timer_setup(&_E->_field1._timer, _callback, 0);
|
-setup_timer(&_E->_field1._timer, (_cast_func)_callback, (_cast_data)_E);
+timer_setup(&_E->_field1._timer, _callback, 0);
|
-setup_timer(&_E->_field1._timer, (_cast_func)&_callback, (_cast_data)_E);
+timer_setup(&_E->_field1._timer, _callback, 0);
|
-setup_timer(&_E._field1._timer, _callback, (_cast_data)_E);
+timer_setup(&_E._field1._timer, _callback, 0);
|
-setup_timer(&_E._field1._timer, _callback, (_cast_data)&_E);
+timer_setup(&_E._field1._timer, _callback, 0);
|
-setup_timer(&_E._field1._timer, &_callback, (_cast_data)_E);
+timer_setup(&_E._field1._timer, _callback, 0);
|
-setup_timer(&_E._field1._timer, &_callback, (_cast_data)&_E);
+timer_setup(&_E._field1._timer, _callback, 0);
|
-setup_timer(&_E._field1._timer, (_cast_func)_callback, (_cast_data)_E);
+timer_setup(&_E._field1._timer, _callback, 0);
|
-setup_timer(&_E._field1._timer, (_cast_func)_callback, (_cast_data)&_E);
+timer_setup(&_E._field1._timer, _callback, 0);
|
-setup_timer(&_E._field1._timer, (_cast_func)&_callback, (_cast_data)_E);
+timer_setup(&_E._field1._timer, _callback, 0);
|
-setup_timer(&_E._field1._timer, (_cast_func)&_callback, (_cast_data)&_E);
+timer_setup(&_E._field1._timer, _callback, 0);
|
 _E->_field1._timer@_stl.function = _callback;
|
 _E->_field1._timer@_stl.function = &_callback;
|
 _E->_field1._timer@_stl.function = (_cast_func)_callback;
|
 _E->_field1._timer@_stl.function = (_cast_func)&_callback;
|
 _E._field1._timer@_stl.function = _callback;
|
 _E._field1._timer@_stl.function = &_callback;
|
 _E._field1._timer@_stl.function = (_cast_func)_callback;
|
 _E._field1._timer@_stl.function = (_cast_func)&_callback;
)

// callback(unsigned long arg)
@change_callback_handle_cast
 depends on change_timer_function_usage@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._field1;
identifier change_timer_function_usage._timer;
type _origtype;
identifier _origarg;
type _handletype;
identifier _handle;
@@

 void _callback(
-_origtype _origarg
+struct timer_list *t
 )
 {
(
... when != _origarg
_handletype *_handle =
-(_handletype *)_origarg;
+from_timer(_handle, t, _field1._timer);
... when != _origarg
|
... when != _origarg
_handletype *_handle =
-(void *)_origarg;
+from_timer(_handle, t, _field1._timer);
... when != _origarg
|
... when != _origarg
_handletype *_handle;
... when != _handle
_handle =
-(_handletype *)_origarg;
+from_timer(_handle, t, _field1._timer);
... when != _origarg
|
... when != _origarg
_handletype *_handle;
... when != _handle
_handle =
-(void *)_origarg;
+from_timer(_handle, t, _field1._timer);
... when != _origarg
)
 }

// callback(unsigned long arg) without existing variable
@change_callback_handle_cast_no_arg
 depends on change_timer_function_usage &&
                     !change_callback_handle_cast@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._field1;
identifier change_timer_function_usage._timer;
type _origtype;
identifier _origarg;
type _handletype;
@@

 void _callback(
-_origtype _origarg
+struct timer_list *t
 )
 {
+ _handletype *_origarg = from_timer(_origarg, t, _field1._timer);
+
... when != _origarg
- (_handletype *)_origarg
+ _origarg
... when != _origarg
 }

// Avoid already converted callbacks.
@match_callback_converted
 depends on change_timer_function_usage &&
            !change_callback_handle_cast &&
    !change_callback_handle_cast_no_arg@
identifier change_timer_function_usage._callback;
identifier t;
@@

 void _callback(struct timer_list *t)
 { ... }

// callback(struct something *handle)
@change_callback_handle_arg
 depends on change_timer_function_usage &&
    !match_callback_converted &&
            !change_callback_handle_cast &&
            !change_callback_handle_cast_no_arg@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._field1;
identifier change_timer_function_usage._timer;
type _handletype;
identifier _handle;
@@

 void _callback(
-_handletype *_handle
+struct timer_list *t
 )
 {
+ _handletype *_handle = from_timer(_handle, t, _field1._timer);
...
 }

// If change_callback_handle_arg ran on an empty function, remove
// the added handler.
@unchange_callback_handle_arg
 depends on change_timer_function_usage &&
    change_callback_handle_arg@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._field1;
identifier change_timer_function_usage._timer;
type _handletype;
identifier _handle;
identifier t;
@@

 void _callback(struct timer_list *t)
 {
- _handletype *_handle = from_timer(_handle, t, _field1._timer);
 }

// We only want to refactor the setup_timer() data argument if we've found
// the matching callback. This undoes changes in change_timer_function_usage.
@unchange_timer_function_usage
 depends on change_timer_function_usage &&
            !change_callback_handle_cast &&
            !change_callback_handle_cast_no_arg &&
    !change_callback_handle_arg@
expression change_timer_function_usage._E;
identifier change_timer_function_usage._field1;
identifier change_timer_function_usage._timer;
identifier change_timer_function_usage._callback;
type change_timer_function_usage._cast_data;
@@

(
-timer_setup(&_E->_field1._timer, _callback, 0);
+setup_timer(&_E->_field1._timer, _callback, (_cast_data)_E);
|
-timer_setup(&_E._field1._timer, _callback, 0);
+setup_timer(&_E._field1._timer, _callback, (_cast_data)&_E);
)

// If we fixed a callback from a .function assignment, fix the
// assignment cast now.
@change_timer_function_assignment
 depends on change_timer_function_usage &&
            (change_callback_handle_cast ||
             change_callback_handle_cast_no_arg ||
             change_callback_handle_arg)@
expression change_timer_function_usage._E;
identifier change_timer_function_usage._field1;
identifier change_timer_function_usage._timer;
identifier change_timer_function_usage._callback;
type _cast_func;
typedef TIMER_FUNC_TYPE;
@@

(
 _E->_field1._timer.function =
-_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E->_field1._timer.function =
-&_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E->_field1._timer.function =
-(_cast_func)_callback;
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E->_field1._timer.function =
-(_cast_func)&_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E._field1._timer.function =
-_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E._field1._timer.function =
-&_callback;
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E._field1._timer.function =
-(_cast_func)_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E._field1._timer.function =
-(_cast_func)&_callback
+(TIMER_FUNC_TYPE)_callback
 ;
)

// Sometimes timer functions are called directly. Replace matched args.
@change_timer_function_calls
 depends on change_timer_function_usage &&
            (change_callback_handle_cast ||
             change_callback_handle_cast_no_arg ||
             change_callback_handle_arg)@
expression _E;
identifier change_timer_function_usage._field1;
identifier change_timer_function_usage._timer;
identifier change_timer_function_usage._callback;
type _cast_data;
@@

 _callback(
(
-(_cast_data)_E
+&_E->_field1._timer
|
-(_cast_data)&_E
+&_E._field1._timer
|
-_E
+&_E->_field1._timer
)
 )

// If a timer has been configured without a data argument, it can be
// converted without regard to the callback argument, since it is unused.
@match_timer_function_unused_data@
expression _E;
identifier _field1;
identifier _timer;
identifier _callback;
@@

(
-setup_timer(&_E->_field1._timer, _callback, 0);
+timer_setup(&_E->_field1._timer, _callback, 0);
|
-setup_timer(&_E->_field1._timer, _callback, 0L);
+timer_setup(&_E->_field1._timer, _callback, 0);
|
-setup_timer(&_E->_field1._timer, _callback, 0UL);
+timer_setup(&_E->_field1._timer, _callback, 0);
|
-setup_timer(&_E._field1._timer, _callback, 0);
+timer_setup(&_E._field1._timer, _callback, 0);
|
-setup_timer(&_E._field1._timer, _callback, 0L);
+timer_setup(&_E._field1._timer, _callback, 0);
|
-setup_timer(&_E._field1._timer, _callback, 0UL);
+timer_setup(&_E._field1._timer, _callback, 0);
|
-setup_timer(&_field1._timer, _callback, 0);
+timer_setup(&_field1._timer, _callback, 0);
|
-setup_timer(&_field1._timer, _callback, 0L);
+timer_setup(&_field1._timer, _callback, 0);
|
-setup_timer(&_field1._timer, _callback, 0UL);
+timer_setup(&_field1._timer, _callback, 0);
|
-setup_timer(_field1._timer, _callback, 0);
+timer_setup(_field1._timer, _callback, 0);
|
-setup_timer(_field1._timer, _callback, 0L);
+timer_setup(_field1._timer, _callback, 0);
|
-setup_timer(_field1._timer, _callback, 0UL);
+timer_setup(_field1._timer, _callback, 0);
)

@change_callback_unused_data
 depends on match_timer_function_unused_data@
identifier match_timer_function_unused_data._callback;
type _origtype;
identifier _origarg;
@@

 void _callback(
-_origtype _origarg
+struct timer_list *unused
 )
 {
... when != _origarg
 }

Signed-off-by: Kees Cook <[email protected]>

treewide: setup_timer() -> timer_setup()

This converts all remaining cases of the old setup_timer() API into using
timer_setup(), where the callback argument is the structure already
holding the struct timer_list. These should have no behavioral changes,
since they just change which pointer is passed into the callback with
the same available pointers after conversion. It handles the following
examples, in addition to some other variations.

Casting from unsigned long:

    void my_callback(unsigned long data)
    {
        struct something *ptr = (struct something *)data;
    ...
    }
    ...
    setup_timer(&ptr->my_timer, my_callback, ptr);

and forced object casts:

    void my_callback(struct something *ptr)
    {
    ...
    }
    ...
    setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr);

become:

    void my_callback(struct timer_list *t)
    {
        struct something *ptr = from_timer(ptr, t, my_timer);
    ...
    }
    ...
    timer_setup(&ptr->my_timer, my_callback, 0);

Direct function assignments:

    void my_callback(unsigned long data)
    {
        struct something *ptr = (struct something *)data;
    ...
    }
    ...
    ptr->my_timer.function = my_callback;

have a temporary cast added, along with converting the args:

    void my_callback(struct timer_list *t)
    {
        struct something *ptr = from_timer(ptr, t, my_timer);
    ...
    }
    ...
    ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback;

And finally, callbacks without a data assignment:

    void my_callback(unsigned long data)
    {
    ...
    }
    ...
    setup_timer(&ptr->my_timer, my_callback, 0);

have their argument renamed to verify they're unused during conversion:

    void my_callback(struct timer_list *unused)
    {
    ...
    }
    ...
    timer_setup(&ptr->my_timer, my_callback, 0);

The conversion is done with the following Coccinelle script:

spatch --very-quiet --all-includes --include-headers \
-I ./arch/x86/include -I ./arch/x86/include/generated \
-I ./include -I ./arch/x86/include/uapi \
-I ./arch/x86/include/generated/uapi -I ./include/uapi \
-I ./include/generated/uapi --include ./include/linux/kconfig.h \
--dir . \
--cocci-file ~/src/data/timer_setup.cocci

@fix_address_of@
expression e;
@@

 setup_timer(
-&(e)
+&e
 , ...)

// Update any raw setup_timer() usages that have a NULL callback, but
// would otherwise match change_timer_function_usage, since the latter
// will update all function assignments done in the face of a NULL
// function initialization in setup_timer().
@change_timer_function_usage_NULL@
expression _E;
identifier _timer;
type _cast_data;
@@

(
-setup_timer(&_E->_timer, NULL, _E);
+timer_setup(&_E->_timer, NULL, 0);
|
-setup_timer(&_E->_timer, NULL, (_cast_data)_E);
+timer_setup(&_E->_timer, NULL, 0);
|
-setup_timer(&_E._timer, NULL, &_E);
+timer_setup(&_E._timer, NULL, 0);
|
-setup_timer(&_E._timer, NULL, (_cast_data)&_E);
+timer_setup(&_E._timer, NULL, 0);
)

@change_timer_function_usage@
expression _E;
identifier _timer;
struct timer_list _stl;
identifier _callback;
type _cast_func, _cast_data;
@@

(
-setup_timer(&_E->_timer, _callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, &_callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, _callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, &_callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)_callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)&_callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, &_callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, &_callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
 _E->_timer@_stl.function = _callback;
|
 _E->_timer@_stl.function = &_callback;
|
 _E->_timer@_stl.function = (_cast_func)_callback;
|
 _E->_timer@_stl.function = (_cast_func)&_callback;
|
 _E._timer@_stl.function = _callback;
|
 _E._timer@_stl.function = &_callback;
|
 _E._timer@_stl.function = (_cast_func)_callback;
|
 _E._timer@_stl.function = (_cast_func)&_callback;
)

// callback(unsigned long arg)
@change_callback_handle_cast
 depends on change_timer_function_usage@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _origtype;
identifier _origarg;
type _handletype;
identifier _handle;
@@

 void _callback(
-_origtype _origarg
+struct timer_list *t
 )
 {
(
... when != _origarg
_handletype *_handle =
-(_handletype *)_origarg;
+from_timer(_handle, t, _timer);
... when != _origarg
|
... when != _origarg
_handletype *_handle =
-(void *)_origarg;
+from_timer(_handle, t, _timer);
... when != _origarg
|
... when != _origarg
_handletype *_handle;
... when != _handle
_handle =
-(_handletype *)_origarg;
+from_timer(_handle, t, _timer);
... when != _origarg
|
... when != _origarg
_handletype *_handle;
... when != _handle
_handle =
-(void *)_origarg;
+from_timer(_handle, t, _timer);
... when != _origarg
)
 }

// callback(unsigned long arg) without existing variable
@change_callback_handle_cast_no_arg
 depends on change_timer_function_usage &&
                     !change_callback_handle_cast@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _origtype;
identifier _origarg;
type _handletype;
@@

 void _callback(
-_origtype _origarg
+struct timer_list *t
 )
 {
+ _handletype *_origarg = from_timer(_origarg, t, _timer);
+
... when != _origarg
- (_handletype *)_origarg
+ _origarg
... when != _origarg
 }

// Avoid already converted callbacks.
@match_callback_converted
 depends on change_timer_function_usage &&
            !change_callback_handle_cast &&
    !change_callback_handle_cast_no_arg@
identifier change_timer_function_usage._callback;
identifier t;
@@

 void _callback(struct timer_list *t)
 { ... }

// callback(struct something *handle)
@change_callback_handle_arg
 depends on change_timer_function_usage &&
    !match_callback_converted &&
            !change_callback_handle_cast &&
            !change_callback_handle_cast_no_arg@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _handletype;
identifier _handle;
@@

 void _callback(
-_handletype *_handle
+struct timer_list *t
 )
 {
+ _handletype *_handle = from_timer(_handle, t, _timer);
...
 }

// If change_callback_handle_arg ran on an empty function, remove
// the added handler.
@unchange_callback_handle_arg
 depends on change_timer_function_usage &&
    change_callback_handle_arg@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _handletype;
identifier _handle;
identifier t;
@@

 void _callback(struct timer_list *t)
 {
- _handletype *_handle = from_timer(_handle, t, _timer);
 }

// We only want to refactor the setup_timer() data argument if we've found
// the matching callback. This undoes changes in change_timer_function_usage.
@unchange_timer_function_usage
 depends on change_timer_function_usage &&
            !change_callback_handle_cast &&
            !change_callback_handle_cast_no_arg &&
    !change_callback_handle_arg@
expression change_timer_function_usage._E;
identifier change_timer_function_usage._timer;
identifier change_timer_function_usage._callback;
type change_timer_function_usage._cast_data;
@@

(
-timer_setup(&_E->_timer, _callback, 0);
+setup_timer(&_E->_timer, _callback, (_cast_data)_E);
|
-timer_setup(&_E._timer, _callback, 0);
+setup_timer(&_E._timer, _callback, (_cast_data)&_E);
)

// If we fixed a callback from a .function assignment, fix the
// assignment cast now.
@change_timer_function_assignment
 depends on change_timer_function_usage &&
            (change_callback_handle_cast ||
             change_callback_handle_cast_no_arg ||
             change_callback_handle_arg)@
expression change_timer_function_usage._E;
identifier change_timer_function_usage._timer;
identifier change_timer_function_usage._callback;
type _cast_func;
typedef TIMER_FUNC_TYPE;
@@

(
 _E->_timer.function =
-_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E->_timer.function =
-&_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E->_timer.function =
-(_cast_func)_callback;
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E->_timer.function =
-(_cast_func)&_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E._timer.function =
-_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E._timer.function =
-&_callback;
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E._timer.function =
-(_cast_func)_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E._timer.function =
-(_cast_func)&_callback
+(TIMER_FUNC_TYPE)_callback
 ;
)

// Sometimes timer functions are called directly. Replace matched args.
@change_timer_function_calls
 depends on change_timer_function_usage &&
            (change_callback_handle_cast ||
             change_callback_handle_cast_no_arg ||
             change_callback_handle_arg)@
expression _E;
identifier change_timer_function_usage._timer;
identifier change_timer_function_usage._callback;
type _cast_data;
@@

 _callback(
(
-(_cast_data)_E
+&_E->_timer
|
-(_cast_data)&_E
+&_E._timer
|
-_E
+&_E->_timer
)
 )

// If a timer has been configured without a data argument, it can be
// converted without regard to the callback argument, since it is unused.
@match_timer_function_unused_data@
expression _E;
identifier _timer;
identifier _callback;
@@

(
-setup_timer(&_E->_timer, _callback, 0);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, _callback, 0L);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, _callback, 0UL);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, 0);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, 0L);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, 0UL);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_timer, _callback, 0);
+timer_setup(&_timer, _callback, 0);
|
-setup_timer(&_timer, _callback, 0L);
+timer_setup(&_timer, _callback, 0);
|
-setup_timer(&_timer, _callback, 0UL);
+timer_setup(&_timer, _callback, 0);
|
-setup_timer(_timer, _callback, 0);
+timer_setup(_timer, _callback, 0);
|
-setup_timer(_timer, _callback, 0L);
+timer_setup(_timer, _callback, 0);
|
-setup_timer(_timer, _callback, 0UL);
+timer_setup(_timer, _callback, 0);
)

@change_callback_unused_data
 depends on match_timer_function_unused_data@
identifier match_timer_function_unused_data._callback;
type _origtype;
identifier _origarg;
@@

 void _callback(
-_origtype _origarg
+struct timer_list *unused
 )
 {
... when != _origarg
 }

Signed-off-by: Kees Cook <[email protected]>

treewide: init_timer() -> setup_timer()

This mechanically converts all remaining cases of ancient open-coded timer
setup with the old setup_timer() API, which is the first step in timer
conversions. This has no behavioral changes, since it ultimately just
changes the order of assignment to fields of struct timer_list when
finding variations of:

    init_timer(&t);
    f.function = timer_callback;
    t.data = timer_callback_arg;

to be converted into:

    setup_timer(&t, timer_callback, timer_callback_arg);

The conversion is done with the following Coccinelle script, which
is an improved version of scripts/cocci/api/setup_timer.cocci, in the
following ways:
 - assignments-before-init_timer() cases
 - limit the .data case removal to the specific struct timer_list instance
 - handling calls by dereference (timer->field vs timer.field)

spatch --very-quiet --all-includes --include-headers \
-I ./arch/x86/include -I ./arch/x86/include/generated \
-I ./include -I ./arch/x86/include/uapi \
-I ./arch/x86/include/generated/uapi -I ./include/uapi \
-I ./include/generated/uapi --include ./include/linux/kconfig.h \
--dir . \
--cocci-file ~/src/data/setup_timer.cocci

@fix_address_of@
expression e;
@@

 init_timer(
-&(e)
+&e
 , ...)

// Match the common cases first to avoid Coccinelle parsing loops with
// "... when" clauses.

@match_immediate_function_data_after_init_timer@
expression e, func, da;
@@

-init_timer
+setup_timer
 ( \(&e\|e\)
+, func, da
 );
(
-\(e.function\|e->function\) = func;
-\(e.data\|e->data\) = da;
|
-\(e.data\|e->data\) = da;
-\(e.function\|e->function\) = func;
)

@match_immediate_function_data_before_init_timer@
expression e, func, da;
@@

(
-\(e.function\|e->function\) = func;
-\(e.data\|e->data\) = da;
|
-\(e.data\|e->data\) = da;
-\(e.function\|e->function\) = func;
)
-init_timer
+setup_timer
 ( \(&e\|e\)
+, func, da
 );

@match_function_and_data_after_init_timer@
expression e, e2, e3, e4, e5, func, da;
@@

-init_timer
+setup_timer
 ( \(&e\|e\)
+, func, da
 );
 ... when != func = e2
     when != da = e3
(
-e.function = func;
... when != da = e4
-e.data = da;
|
-e->function = func;
... when != da = e4
-e->data = da;
|
-e.data = da;
... when != func = e5
-e.function = func;
|
-e->data = da;
... when != func = e5
-e->function = func;
)

@match_function_and_data_before_init_timer@
expression e, e2, e3, e4, e5, func, da;
@@
(
-e.function = func;
... when != da = e4
-e.data = da;
|
-e->function = func;
... when != da = e4
-e->data = da;
|
-e.data = da;
... when != func = e5
-e.function = func;
|
-e->data = da;
... when != func = e5
-e->function = func;
)
... when != func = e2
    when != da = e3
-init_timer
+setup_timer
 ( \(&e\|e\)
+, func, da
 );

@r1 exists@
expression t;
identifier f;
position p;
@@

f(...) { ... when any
  init_timer@p(\(&t\|t\))
  ... when any
}

@r2 exists@
expression r1.t;
identifier g != r1.f;
expression e8;
@@

g(...) { ... when any
  \(t.data\|t->data\) = e8
  ... when any
}

// It is dangerous to use setup_timer if data field is initialized
// in another function.
@script:python depends on r2@
p << r1.p;
@@

cocci.include_match(False)

@r3@
expression r1.t, func, e7;
position r1.p;
@@

(
-init_timer@p(&t);
+setup_timer(&t, func, 0UL);
... when != func = e7
-t.function = func;
|
-t.function = func;
... when != func = e7
-init_timer@p(&t);
+setup_timer(&t, func, 0UL);
|
-init_timer@p(t);
+setup_timer(t, func, 0UL);
... when != func = e7
-t->function = func;
|
-t->function = func;
... when != func = e7
-init_timer@p(t);
+setup_timer(t, func, 0UL);
)

Signed-off-by: Kees Cook <[email protected]>

treewide: Switch DEFINE_TIMER callbacks to struct timer_list *

This changes all DEFINE_TIMER() callbacks to use a struct timer_list
pointer instead of unsigned long. Since the data argument has already been
removed, none of these callbacks are using their argument currently, so
this renames the argument to "unused".

Done using the following semantic patch:

@match_define_timer@
declarer name DEFINE_TIMER;
identifier _timer, _callback;
@@

 DEFINE_TIMER(_timer, _callback);

@change_callback depends on match_define_timer@
identifier match_define_timer._callback;
type _origtype;
identifier _origarg;
@@

 void
-_callback(_origtype _origarg)
+_callback(struct timer_list *unused)
 { ... }

Signed-off-by: Kees Cook <[email protected]>

s390: cmm: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Martin Schwidefsky <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: Paul Gortmaker <[email protected]>
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>

lightnvm: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Matias Bjorling <[email protected]>
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>

drivers/net: cris: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: "David S. Miller" <[email protected]>
Cc: Kalle Valo <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: "[email protected]" <[email protected]>
Cc: Paul Gortmaker <[email protected]>
Cc: Philippe Reynes <[email protected]>
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>

drm/vc4: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Eric Anholt <[email protected]>
Cc: David Airlie <[email protected]>
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Eric Anholt <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20171024151648.GA104538@beast
Reviewed-by: Eric Anholt <[email protected]>

block/laptop_mode: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Jens Axboe <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Jan Kara <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Nicholas Piggin <[email protected]>
Cc: Vladimir Davydov <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Jeff Layton <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>

net/atm/mpc: Avoid open-coded assignment of timer callback function

Instead of a single function assignment, just fold this into DEFINE_TIMER().

Cc: "David S. Miller" <[email protected]>
Signed-off-by: Kees Cook <[email protected]>

drm/i915/selftests: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Jani Nikula <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Cc: Chris Wilson <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>
Acked-by: Jani Nikula <[email protected]>

usb: usbatm: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly. Additionally corrects and on-stack
timer usage.

Cc: Greg Kroah-Hartman <[email protected]>
Cc: Duncan Sands <[email protected]>
Cc: "Gustavo A. R. Silva" <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>
Reviewed-by: Allen Pais <[email protected]>

drivers/firmware: psci: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly. Also adds missing call to
destroy_timer_on_stack().

Cc: Mark Rutland <[email protected]>
Cc: Lorenzo Pieralisi <[email protected]>
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>

ARC: perf: avoid vmalloc backed mmap

For non-alising Dcache, vmalloc is not needed.

vmalloc triggers additonal D-TLB Misses in the perf interrupt code path
making it slightly inefficient as evident from hackbench runs below.

| [ARCLinux]# perf stat -e dTLB-load-misses --repeat 5 hackbench
| Running with 10*40 (== 400) tasks.
| Time: 35.060
| ...
| Performance counter stats for 'hackbench' (5 runs):

Before:      399235      dTLB-load-misses ( +-  2.08% )
After :      397676      dTLB-load-misses ( +-  2.27% )

Acked-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>

ARCv2: perf: optimize given that num counters <= 32

use ffz primitive which maps to ARCv2 instruction, vs. non atomic
__test_and_set_bit

It is unlikely if we will even have more than 32 counters, but still add
a BUILD_BUG to catch that

Acked-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>

ARCv2: perf: tweak overflow interrupt

Current perf ISR loops thru all 32 counters, checking for each if it
caused the interrupt. Instead only loop thru counters which actually
interrupted (typically 1).

Acked-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>

bpf: change bpf_probe_write_user to bpf_trace_printk in test_verifier

There are four tests in test_verifier using bpf_probe_write_user
helper. These four tests will emit the following kernel messages
  [   12.974753] test_verifier[220] is installing a program with bpf_probe_write_user
                                    helper that may corrupt user memory!
  [   12.979285] test_verifier[220] is installing a program with bpf_probe_write_user
                                    helper that may corrupt user memory!
  ......

This may confuse certain users. This patch replaces bpf_probe_write_user
with bpf_trace_printk. The test_verifier already uses bpf_trace_printk
earlier in the test and a trace_printk warning message has been printed.
So this patch does not emit any more kernel messages.

Fixes: b6ff63911232 ("bpf: fix and add test cases for ARG_CONST_SIZE_OR_ZERO semantics change")
Signed-off-by: Yonghong Song <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>

platform/x86: dell-laptop: fix error return code in dell_init()

Fix to return error code -ENOMEM from the kzalloc() error handling
case instead of 0, as done elsewhere in this function.

Fixes: 549b4930f057 ("platform/x86: dell-smbios: Introduce dispatcher for SMM calls")
Signed-off-by: Wei Yongjun <[email protected]>
Acked-by: Mario Limonciello <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>

ALSA: usb-audio: Add sanity checks in v2 clock parsers

The helper functions to parse and look for the clock source, selector
and multiplier unit may return the descriptor with a too short length
than required, while there is no sanity check in the caller side.
Add some sanity checks in the parsers, at least, to guarantee the
given descriptor size, for avoiding the potential crashes.

Fixes: 79f920fbff56 ("ALSA: usb-audio: parse clock topology of UAC2 devices")
Reported-by: Andrey Konovalov <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>

ALSA: usb-audio: Fix potential zero-division at parsing FU

parse_audio_feature_unit() contains a code dividing potentially with
zero when a malformed FU descriptor is passed.  Although there is
already a sanity check, it checks only the value zero, hence it can
still lead to a zero-division when a value 1 is passed there.

Fix it by correcting the sanity check (and the error message
thereof).

Fixes: 23caaf19b11e ("ALSA: usb-mixer: Add support for Audio Class v2.0")
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>

ALSA: usb-audio: Fix potential out-of-bound access at parsing SU

The usb-audio driver may trigger an out-of-bound access at parsing a
malformed selector unit, as it checks the header length only after
evaluating bNrInPins field, which can be already above the given
length.  Fix it by adding the length check beforehand.

Fixes: 99fc86450c43 ("ALSA: usb-mixer: parse descriptors with structs")
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>

ALSA: usb-audio: Add sanity checks to FE parser

When the usb-audio descriptor contains the malformed feature unit
description with a too short length, the driver may access
out-of-bounds.  Add a sanity check of the header size at the beginning
of parse_audio_feature_unit().

Fixes: 23caaf19b11e ("ALSA: usb-mixer: Add support for Audio Class v2.0")
Reported-by: Andrey Konovalov <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Fix a reference to a module parameter which was lost during the
    GREv6 receive path rewrite, from Alexey Kodanev.

 2) Fix deref before NULL check in ipheth, from Gustavo A. R. Silva.

 3) RCU read lock imbalance in tun_build_skb(), from Xin Long.

 4) Some stragglers from the mac80211 folks:

      a) Timer conversions from Kees Cook

      b) Fix some sequencing issue when cfg80211 is built statically,
         from Johannes Berg

      c) Memory leak in mac80211_hwsim, from Ben Hutchings.

 5) Add new qmi_wwan device ID, from Sebastian Sjoholm.

 6) Fix use after free in tipc, from Jon Maloy.

 7) Missing kdoc in nfp driver, from Jakub Kicinski.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  nfp: flower: add missing kdoc
  tipc: fix access of released memory
  net: qmi_wwan: add Quectel BG96 2c7c:0296
  mlxsw: spectrum: Do not try to create non-existing ports during unsplit
  mac80211: properly free requested-but-not-started TX agg sessions
  mac80211_hwsim: Fix memory leak in hwsim_new_radio_nl()
  cfg80211: initialize regulatory keys/database later
  mac80211: aggregation: Convert timers to use timer_setup()
  nl80211: don't expose wdev->ssid for most interfaces
  mac80211: Convert timers to use timer_setup()
  net: vxge: Fix some indentation issues
  net: ena: fix race condition between device reset and link up setup
  r8169: use same RTL8111EVL green settings as in vendor driver
  r8169: fix RTL8111EVL EEE and green settings
  tun: fix rcu_read_lock imbalance in tun_build_skb
  tcp: when scheduling TLP, time of RTO should account for current ACK
  usbnet: ipheth: fix potential null pointer dereference in ipheth_carrier_set
  gre6: use log_ecn_error module parameter in ip6_tnl_rcv()

drm/amdgpu: fix rmmod KCQ disable failed error

If  gfx_v8_0_hw_fini is called after amdgpu_ucode_fini_bo, we will
hit KCQ disabled failed. Let amdgpu_ucode_fini_bo run after
gfx_v8_0_hw_fini.

BUG: SWDEV-135547
Reviewed-by: Rex Zhu <[email protected]>
Signed-off-by: Wang Hongcheng <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>

drm/amdgpu: fix kernel hang when starting VNC server

After starting VNC server or running CTS test, kernel will hang and
can see below call trace:

[961816] INFO: task khugepaged:42 blocked for more than 120 seconds.
[968581]       Tainted: G           OE   4.13.0 #1
[973495] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables
          this message.
[980962] khugepaged      D    0    42      2 0x00000000
[980967] Call Trace:
[980977]  __schedule+0x28d/0x890
[980982]  schedule+0x36/0x80
[980986]  rwsem_down_read_failed+0x139/0x1c0
[980991]  ? update_curr+0x100/0x1c0
[981004]  call_rwsem_down_read_failed+0x18/0x30
[981007]  down_read+0x20/0x40
[981012]  khugepaged_scan_mm_slot+0x78/0x1ac0
[981018]  ? __switch_to+0x23e/0x4a0
[981022]  ? finish_task_switch+0x79/0x240
[981026]  khugepaged+0x146/0x480
[981031]  ? remove_wait_queue+0x60/0x60
[981035]  kthread+0x109/0x140
[981037]  ? khugepaged_scan_mm_slot+0x1ac0/0x1ac0
[981039]  ? kthread_park+0x60/0x60
[981044]  ret_from_fork+0x25/0x30

After checking code and found 'commit b72cf4fca2bb7 ("drm/amdgpu: move
taking mmap_sem into get_user_pages v2")' forget to drop one case of
up_read.

Signed-off-by: Xiangliang.Yu <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>

Merge tag 'for-linus-4.15-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux

Pull orangefs updates from Mike Marshall:
 "Fix:

   - stop setting atime on inode dirty (Martin Brandenburg)

  Cleanups:

   - remove initialization of i_version (Jeff Layton)

   - use ARRAY_SIZE (Jérémy Lefaure)

   - call op_release sooner when creating inodes (Mike MarshallMartin
     Brandenburg)"

* tag 'for-linus-4.15-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
  orangefs: call op_release sooner when creating inodes
  orangefs: stop setting atime on inode dirty
  orangefs: use ARRAY_SIZE
  orangefs: remove initialization of i_version

Merge tag 'ceph-for-4.15-rc1' of git://github.com/ceph/ceph-client

Pull ceph updates from Ilya Dryomov:
 "We have a set of file locking improvements from Zheng, rbd rw/ro state
  handling code cleanup from myself and some assorted CephFS fixes from
  Jeff.

  rbd now defaults to single-major=Y, lifting the limit of ~240 rbd
  images per host for everyone"

* tag 'ceph-for-4.15-rc1' of git://github.com/ceph/ceph-client:
  rbd: default to single-major device number scheme
  libceph: don't WARN() if user tries to add invalid key
  rbd: set discard_alignment to zero
  ceph: silence sparse endianness warning in encode_caps_cb
  ceph: remove the bump of i_version
  ceph: present consistent fsid, regardless of arch endianness
  ceph: clean up spinlocking and list handling around cleanup_cap_releases()
  rbd: get rid of rbd_mapping::read_only
  rbd: fix and simplify rbd_ioctl_set_ro()
  ceph: remove unused and redundant variable dropping
  ceph: mark expected switch fall-throughs
  ceph: -EINVAL on decoding failure in ceph_mdsc_handle_fsmap()
  ceph: disable cached readdir after dropping positive dentry
  ceph: fix bool initialization/comparison
  ceph: handle 'session get evicted while there are file locks'
  ceph: optimize flock encoding during reconnect
  ceph: make lock_to_ceph_filelock() static
  ceph: keep auth cap when inode has flocks or posix locks

ALSA: timer: Remove kernel warning at compat ioctl error paths

Some timer compat ioctls have NULL checks of timer instance with
snd_BUG_ON() that bring up WARN_ON() when the debug option is set.
Actually the condition can be met in the normal situation and it's
confusing and bad to spew kernel warnings with stack trace there.
Let's remove snd_BUG_ON() invocation and replace with the simple
checks.  Also, correct the error code to EBADFD to follow the native
ioctl error handling.

Reported-by: syzbot <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk

Pull printk updates from Petr Mladek:

 - print the warning about dropped messages on consoles on a separate
   line.   It makes it more legible.

 - one typo fix and small code clean up.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
  added new line symbol after warning about dropped messages
  printk: fix typo in printk_safe.c
  printk: simplify no_printk()

ARM: 8722/1: mm: make STRICT_KERNEL_RWX effective for LPAE

Currently, for ARM kernels with CONFIG_ARM_LPAE and
CONFIG_STRICT_KERNEL_RWX enabled, the 2MiB pages mapping the
kernel code and rodata are writable. They are marked read-only in
a software bit (L_PMD_SECT_RDONLY) but the hardware read-only bit
is not set (PMD_SECT_AP2).

For user mappings, the logic that propagates the software bit
to the hardware bit is in set_pmd_at(); but for the kernel,
section_update() writes the PMDs directly, skipping this logic.

The fix is to set PMD_SECT_AP2 for read-only sections in
section_update(), at the same time as L_PMD_SECT_RDONLY.

Fixes: 1e3479225acb ("ARM: 8275/1: mm: fix PMD_SECT_RDONLY undeclared compile error")
Signed-off-by: Philip Derrin <[email protected]>
Reported-by: Neil Dick <[email protected]>
Tested-by: Neil Dick <[email protected]>
Tested-by: Laura Abbott <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Cc: [email protected]
Signed-off-by: Russell King <[email protected]>

ARM: 8721/1: mm: dump: check hardware RO bit for LPAE

When CONFIG_ARM_LPAE is set, the PMD dump relies on the software
read-only bit to determine whether a page is writable. This
concealed a bug which left the kernel text section writable
(AP2=0) while marked read-only in the software bit.

In a kernel with the AP2 bug, the dump looks like this:

    ---[ Kernel Mapping ]---
    0xc0000000-0xc0200000           2M RW NX SHD
    0xc0200000-0xc0600000           4M ro x  SHD
    0xc0600000-0xc0800000           2M ro NX SHD
    0xc0800000-0xc4800000          64M RW NX SHD

The fix is to check that the software and hardware bits are both
set before displaying "ro". The dump then shows the true perms:

    ---[ Kernel Mapping ]---
    0xc0000000-0xc0200000           2M RW NX SHD
    0xc0200000-0xc0600000           4M RW x  SHD
    0xc0600000-0xc0800000           2M RW NX SHD
    0xc0800000-0xc4800000          64M RW NX SHD

Fixes: ded947798469 ("ARM: 8109/1: mm: Modify pte_write and pmd_write logic for LPAE")
Signed-off-by: Philip Derrin <[email protected]>
Tested-by: Neil Dick <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Cc: [email protected]
Signed-off-by: Russell King <[email protected]>

ARM: make decompressor debug output user selectable

Make the decompressor debug output user selectable, otherwise merely
enabling DEBUG_LL causes the decompressor to become board specific,
thereby preventing a multi-platform kernel from booting.  Enabling
DEBUG_LL doesn't cause the kernel itself to become platform specific
unless EARLY_PRINTK is enabled, or one of the debugging routines is
added in a path that results in it being called.

Signed-off-by: Russell King <[email protected]>

ARM: fix get_user_pages_fast

Ensure that get_user_pages_fast() is not able to access memory which
has been mapped with PROT_NONE.

Reported-by: Al Viro <[email protected]>
Signed-off-by: Russell King <[email protected]>

ALSA: pcm: update tstamp only if audio_tstamp changed

commit 3179f6200188 ("ALSA: core: add .get_time_info") had a side effect
of changing the behaviour of the PCM runtime tstamp.  Prior to this
change tstamp was not updated by snd_pcm_update_hw_ptr0() unless the
hw_ptr had moved, after this change tstamp was always updated.

For an application using alsa-lib, doing snd_pcm_readi() followed by
snd_pcm_status() to estimate the age of the read samples by subtracting
status->avail * [sample rate] from status->tstamp this change degraded
the accuracy of the estimate on devices where the pcm hw does not
provide a granular hw_ptr, e.g., devices using
soc-generic-dmaengine-pcm.c and a dma-engine with residue_granularity
DMA_RESIDUE_GRANULARITY_DESCRIPTOR.  The accuracy of the estimate
depended on the latency between the PCM hw completing a period and the
driver called snd_pcm_period_elapsed() to notify ALSA core, typically
determined by interrupt handling latency.  After the change the accuracy
of the estimate depended on the latency between the PCM hw completing a
period and the application calling snd_pcm_status(), determined by the
scheduling of the application process.  The maximum error of the
estimate is one period length in both cases, but the error average and
variance is smaller when it depends on interrupt latency.

Instead of always updating tstamp, update it only if audio_tstamp
changed.

Fixes: 3179f6200188 ("ALSA: core: add .get_time_info")
Suggested-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Henrik Eriksson <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>

Merge tag 'mac80211-for-davem-2017-11-20' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
A few things:
 * straggler timer conversions from Kees
 * memory leak fix in hwsim
 * fix some fallout from regdb changes if wireless is built-in
 * also free aggregation sessions in startup state when station
   goes away, to avoid crashing the timer
====================

Signed-off-by: David S. Miller <[email protected]>

nfp: flower: add missing kdoc

Commit 0115552eac14 ("nfp: remove false positive offloads
in flower vxlan") missed adding kdoc for a new parameter
of nfp_flower_add_offload().

Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

tipc: fix access of released memory

When the function tipc_group_filter_msg() finds that a member event
indicates that the member is leaving the group, it first deletes the
member instance, and then purges the message queue being handled
by the call. But the message queue is an aggregated field in the
just deleted item, leading the purge call to access freed memory.

We fix this by swapping the order of the two actions.

Signed-off-by: Jon Maloy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

net: qmi_wwan: add Quectel BG96 2c7c:0296

Quectel BG96 is an Qualcomm MDM9206 based IoT modem, supporting both
CAT-M and NB-IoT. Tested hardware is BG96 mounted on Quectel development
board (EVB). The USB id is added to qmi_wwan.c to allow QMI
communication with the BG96.

Signed-off-by: Sebastian Sjoholm <[email protected]>
Acked-by: Bjørn Mork <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

mlxsw: spectrum: Do not try to create non-existing ports during unsplit

On some systems, when we unsplit a port we need to re-create two ports
instead. On other systems, only one needs to be re-created.

Do not try to create a port if during driver initialization it was
assigned a negative module number, which is invalid.

This avoids the following error during unsplit:
[  941.012478] mlxsw_spectrum 0000:01:00.0: Port 43: Failed to map module

The error is harmless and caused by the fact that a local port is
already mapped to module 0.

Fixes: be94535f9531 ("mlxsw: spectrum: Make split flow match firmware requirements")
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Arkadi Sharshevsky <[email protected]>
Signed-off-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

apparmor: fix possible recursive lock warning in __aa_create_ns

Use mutex_lock_nested to provide lockdep the parent child lock ordering of
the tree.

This fixes the lockdep Warning
[  305.275177] ============================================
[  305.275178] WARNING: possible recursive locking detected
[  305.275179] 4.14.0-rc7+ #320 Not tainted
[  305.275180] --------------------------------------------
[  305.275181] apparmor_parser/1339 is trying to acquire lock:
[  305.275182]  (&ns->lock){+.+.}, at: [<ffffffff970544dd>] __aa_create_ns+0x6d/0x1e0
[  305.275187]
               but task is already holding lock:
[  305.275187]  (&ns->lock){+.+.}, at: [<ffffffff97054b5d>] aa_prepare_ns+0x3d/0xd0
[  305.275190]
               other info that might help us debug this:
[  305.275191]  Possible unsafe locking scenario:

[  305.275192]        CPU0
[  305.275193]        ----
[  305.275193]   lock(&ns->lock);
[  305.275194]   lock(&ns->lock);
[  305.275195]
                *** DEADLOCK ***

[  305.275196]  May be due to missing lock nesting notation

[  305.275198] 2 locks held by apparmor_parser/1339:
[  305.275198]  #0:  (sb_writers#10){.+.+}, at: [<ffffffff96e9c6b7>] vfs_write+0x1a7/0x1d0
[  305.275202]  #1:  (&ns->lock){+.+.}, at: [<ffffffff97054b5d>] aa_prepare_ns+0x3d/0xd0
[  305.275205]
               stack backtrace:
[  305.275207] CPU: 1 PID: 1339 Comm: apparmor_parser Not tainted 4.14.0-rc7+ #320
[  305.275208] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.1-1ubuntu1 04/01/2014
[  305.275209] Call Trace:
[  305.275212]  dump_stack+0x85/0xcb
[  305.275214]  __lock_acquire+0x141c/0x1460
[  305.275216]  ? __aa_create_ns+0x6d/0x1e0
[  305.275218]  ? ___slab_alloc+0x183/0x540
[  305.275219]  ? ___slab_alloc+0x183/0x540
[  305.275221]  lock_acquire+0xed/0x1e0
[  305.275223]  ? lock_acquire+0xed/0x1e0
[  305.275224]  ? __aa_create_ns+0x6d/0x1e0
[  305.275227]  __mutex_lock+0x89/0x920
[  305.275228]  ? __aa_create_ns+0x6d/0x1e0
[  305.275230]  ? trace_hardirqs_on_caller+0x11f/0x190
[  305.275231]  ? __aa_create_ns+0x6d/0x1e0
[  305.275233]  ? __lockdep_init_map+0x57/0x1d0
[  305.275234]  ? lockdep_init_map+0x9/0x10
[  305.275236]  ? __rwlock_init+0x32/0x60
[  305.275238]  mutex_lock_nested+0x1b/0x20
[  305.275240]  ? mutex_lock_nested+0x1b/0x20
[  305.275241]  __aa_create_ns+0x6d/0x1e0
[  305.275243]  aa_prepare_ns+0xc2/0xd0
[  305.275245]  aa_replace_profiles+0x168/0xf30
[  305.275247]  ? __might_fault+0x85/0x90
[  305.275250]  policy_update+0xb9/0x380
[  305.275252]  profile_load+0x7e/0x90
[  305.275254]  __vfs_write+0x28/0x150
[  305.275256]  ? rcu_read_lock_sched_held+0x72/0x80
[  305.275257]  ? rcu_sync_lockdep_assert+0x2f/0x60
[  305.275259]  ? __sb_start_write+0xdc/0x1c0
[  305.275261]  ? vfs_write+0x1a7/0x1d0
[  305.275262]  vfs_write+0xca/0x1d0
[  305.275264]  ? trace_hardirqs_on_caller+0x11f/0x190
[  305.275266]  SyS_write+0x49/0xa0
[  305.275268]  entry_SYSCALL_64_fastpath+0x23/0xc2
[  305.275271] RIP: 0033:0x7fa6b22e8c74
[  305.275272] RSP: 002b:00007ffeaaee6288 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[  305.275273] RAX: ffffffffffffffda RBX: 00007ffeaaee62a4 RCX: 00007fa6b22e8c74
[  305.275274] RDX: 0000000000000a51 RSI: 00005566a8198c10 RDI: 0000000000000004
[  305.275275] RBP: 0000000000000a39 R08: 0000000000000a51 R09: 0000000000000000
[  305.275276] R10: 0000000000000000 R11: 0000000000000246 R12: 00005566a8198c10
[  305.275277] R13: 0000000000000004 R14: 00005566a72ecb88 R15: 00005566a72ec3a8

Fixes: 73688d1ed0b8 ("apparmor: refactor prepare_ns() and make usable from different views")
Signed-off-by: John Johansen <[email protected]>

apparmor: fix locking when creating a new complain profile.

Break the per cpu buffer atomic section when creating a new null
complain profile. In learning mode this won't matter and we can
safely re-aquire the buffer.

This fixes the following lockdep BUG trace
   nov. 14 14:09:09 cyclope audit[7152]: AVC apparmor="ALLOWED" operation="exec" profile="/usr/sbin/sssd" name="/usr/sbin/adcli" pid=7152 comm="sssd_be" requested_mask="x" denied_mask="x" fsuid=0 ouid=0 target="/usr/sbin/sssd//null-/usr/sbin/adcli"
    nov. 14 14:09:09 cyclope kernel: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:747
    nov. 14 14:09:09 cyclope kernel: in_atomic(): 1, irqs_disabled(): 0, pid: 7152, name: sssd_be
    nov. 14 14:09:09 cyclope kernel: 1 lock held by sssd_be/7152:
    nov. 14 14:09:09 cyclope kernel:  #0:  (&sig->cred_guard_mutex){....}, at: [<ffffffff8182d53e>] prepare_bprm_creds+0x4e/0x100
    nov. 14 14:09:09 cyclope kernel: CPU: 3 PID: 7152 Comm: sssd_be Not tainted 4.14.0prahal+intel #150
    nov. 14 14:09:09 cyclope kernel: Hardware name: LENOVO 20CDCTO1WW/20CDCTO1WW, BIOS GQET53WW (1.33 ) 09/15/2017
    nov. 14 14:09:09 cyclope kernel: Call Trace:
    nov. 14 14:09:09 cyclope kernel:  dump_stack+0xb0/0x135
    nov. 14 14:09:09 cyclope kernel:  ? _atomic_dec_and_lock+0x15b/0x15b
    nov. 14 14:09:09 cyclope kernel:  ? lockdep_print_held_locks+0xc4/0x130
    nov. 14 14:09:09 cyclope kernel:  ___might_sleep+0x29c/0x320
    nov. 14 14:09:09 cyclope kernel:  ? rq_clock+0xf0/0xf0
    nov. 14 14:09:09 cyclope kernel:  ? __kernel_text_address+0xd/0x40
    nov. 14 14:09:09 cyclope kernel:  __might_sleep+0x95/0x190
    nov. 14 14:09:09 cyclope kernel:  ? aa_new_null_profile+0x50a/0x960
    nov. 14 14:09:09 cyclope kernel:  __mutex_lock+0x13e/0x1a20
    nov. 14 14:09:09 cyclope kernel:  ? aa_new_null_profile+0x50a/0x960
    nov. 14 14:09:09 cyclope kernel:  ? save_stack+0x43/0xd0
    nov. 14 14:09:09 cyclope kernel:  ? kmem_cache_alloc_trace+0x13f/0x290
    nov. 14 14:09:09 cyclope kernel:  ? mutex_lock_io_nested+0x1880/0x1880
    nov. 14 14:09:09 cyclope kernel:  ? profile_transition+0x932/0x2d40
    nov. 14 14:09:09 cyclope kernel:  ? apparmor_bprm_set_creds+0x1479/0x1f70
    nov. 14 14:09:09 cyclope kernel:  ? security_bprm_set_creds+0x5a/0x80
    nov. 14 14:09:09 cyclope kernel:  ? prepare_binprm+0x366/0x980
    nov. 14 14:09:09 cyclope kernel:  ? do_execveat_common.isra.30+0x12a9/0x2350
    nov. 14 14:09:09 cyclope kernel:  ? SyS_execve+0x2c/0x40
    nov. 14 14:09:09 cyclope kernel:  ? do_syscall_64+0x228/0x650
    nov. 14 14:09:09 cyclope kernel:  ? entry_SYSCALL64_slow_path+0x25/0x25
    nov. 14 14:09:09 cyclope kernel:  ? deactivate_slab.isra.62+0x49d/0x5e0
    nov. 14 14:09:09 cyclope kernel:  ? save_stack_trace+0x16/0x20
    nov. 14 14:09:09 cyclope kernel:  ? init_object+0x88/0x90
    nov. 14 14:09:09 cyclope kernel:  ? ___slab_alloc+0x520/0x590
    nov. 14 14:09:09 cyclope kernel:  ? ___slab_alloc+0x520/0x590
    nov. 14 14:09:09 cyclope kernel:  ? aa_alloc_proxy+0xab/0x200
    nov. 14 14:09:09 cyclope kernel:  ? lock_downgrade+0x7e0/0x7e0
    nov. 14 14:09:09 cyclope kernel:  ? memcg_kmem_get_cache+0x970/0x970
    nov. 14 14:09:09 cyclope kernel:  ? kasan_unpoison_shadow+0x35/0x50
    nov. 14 14:09:09 cyclope kernel:  ? kasan_unpoison_shadow+0x35/0x50
    nov. 14 14:09:09 cyclope kernel:  ? kasan_kmalloc+0xad/0xe0
    nov. 14 14:09:09 cyclope kernel:  ? aa_alloc_proxy+0xab/0x200
    nov. 14 14:09:09 cyclope kernel:  ? kmem_cache_alloc_trace+0x13f/0x290
    nov. 14 14:09:09 cyclope kernel:  ? aa_alloc_proxy+0xab/0x200
    nov. 14 14:09:09 cyclope kernel:  ? aa_alloc_proxy+0xab/0x200
    nov. 14 14:09:09 cyclope kernel:  ? _raw_spin_unlock+0x22/0x30
    nov. 14 14:09:09 cyclope kernel:  ? vec_find+0xa0/0xa0
    nov. 14 14:09:09 cyclope kernel:  ? aa_label_init+0x6f/0x230
    nov. 14 14:09:09 cyclope kernel:  ? __label_insert+0x3e0/0x3e0
    nov. 14 14:09:09 cyclope kernel:  ? kmem_cache_alloc_trace+0x13f/0x290
    nov. 14 14:09:09 cyclope kernel:  ? aa_alloc_profile+0x58/0x200
    nov. 14 14:09:09 cyclope kernel:  mutex_lock_nested+0x16/0x20
    nov. 14 14:09:09 cyclope kernel:  ? mutex_lock_nested+0x16/0x20
    nov. 14 14:09:09 cyclope kernel:  aa_new_null_profile+0x50a/0x960
    nov. 14 14:09:09 cyclope kernel:  ? aa_fqlookupn_profile+0xdc0/0xdc0
    nov. 14 14:09:09 cyclope kernel:  ? aa_compute_fperms+0x4b5/0x640
    nov. 14 14:09:09 cyclope kernel:  ? disconnect.isra.2+0x1b0/0x1b0
    nov. 14 14:09:09 cyclope kernel:  ? aa_str_perms+0x8d/0xe0
    nov. 14 14:09:09 cyclope kernel:  profile_transition+0x932/0x2d40
    nov. 14 14:09:09 cyclope kernel:  ? up_read+0x1a/0x40
    nov. 14 14:09:09 cyclope kernel:  ? ext4_xattr_get+0x15c/0xaf0 [ext4]
    nov. 14 14:09:09 cyclope kernel:  ? x_table_lookup+0x190/0x190
    nov. 14 14:09:09 cyclope kernel:  ? ext4_xattr_ibody_get+0x590/0x590 [ext4]
    nov. 14 14:09:09 cyclope kernel:  ? sched_clock+0x9/0x10
    nov. 14 14:09:09 cyclope kernel:  ? sched_clock+0x9/0x10
    nov. 14 14:09:09 cyclope kernel:  ? ext4_xattr_security_get+0x1a/0x20 [ext4]
    nov. 14 14:09:09 cyclope kernel:  ? __vfs_getxattr+0x6d/0xa0
    nov. 14 14:09:09 cyclope kernel:  ? get_vfs_caps_from_disk+0x114/0x720
    nov. 14 14:09:09 cyclope kernel:  ? sched_clock+0x9/0x10
    nov. 14 14:09:09 cyclope kernel:  ? sched_clock+0x9/0x10
    nov. 14 14:09:09 cyclope kernel:  ? tsc_resume+0x10/0x10
    nov. 14 14:09:09 cyclope kernel:  ? get_vfs_caps_from_disk+0x720/0x720
    nov. 14 14:09:09 cyclope kernel:  ? native_sched_clock_from_tsc+0x201/0x2b0
    nov. 14 14:09:09 cyclope kernel:  ? sched_clock+0x9/0x10
    nov. 14 14:09:09 cyclope kernel:  ? sched_clock_cpu+0x1b/0x170
    nov. 14 14:09:09 cyclope kernel:  ? find_held_lock+0x3c/0x1e0
    nov. 14 14:09:09 cyclope kernel:  ? rb_insert_color_cached+0x1660/0x1660
    nov. 14 14:09:09 cyclope kernel:  apparmor_bprm_set_creds+0x1479/0x1f70
    nov. 14 14:09:09 cyclope kernel:  ? sched_clock+0x9/0x10
    nov. 14 14:09:09 cyclope kernel:  ? handle_onexec+0x31d0/0x31d0
    nov. 14 14:09:09 cyclope kernel:  ? tsc_resume+0x10/0x10
    nov. 14 14:09:09 cyclope kernel:  ? graph_lock+0xd0/0xd0
    nov. 14 14:09:09 cyclope kernel:  ? tsc_resume+0x10/0x10
    nov. 14 14:09:09 cyclope kernel:  ? sched_clock_cpu+0x1b/0x170
    nov. 14 14:09:09 cyclope kernel:  ? sched_clock+0x9/0x10
    nov. 14 14:09:09 cyclope kernel:  ? sched_clock+0x9/0x10
    nov. 14 14:09:09 cyclope kernel:  ? sched_clock_cpu+0x1b/0x170
    nov. 14 14:09:09 cyclope kernel:  ? find_held_lock+0x3c/0x1e0
    nov. 14 14:09:09 cyclope kernel:  security_bprm_set_creds+0x5a/0x80
    nov. 14 14:09:09 cyclope kernel:  prepare_binprm+0x366/0x980
    nov. 14 14:09:09 cyclope kernel:  ? install_exec_creds+0x150/0x150
    nov. 14 14:09:09 cyclope kernel:  ? __might_fault+0x89/0xb0
    nov. 14 14:09:09 cyclope kernel:  ? up_read+0x40/0x40
    nov. 14 14:09:09 cyclope kernel:  ? get_user_arg_ptr.isra.18+0x2c/0x70
    nov. 14 14:09:09 cyclope kernel:  ? count.isra.20.constprop.32+0x7c/0xf0
    nov. 14 14:09:09 cyclope kernel:  do_execveat_common.isra.30+0x12a9/0x2350
    nov. 14 14:09:09 cyclope kernel:  ? prepare_bprm_creds+0x100/0x100
    nov. 14 14:09:09 cyclope kernel:  ? _raw_spin_unlock+0x22/0x30
    nov. 14 14:09:09 cyclope kernel:  ? deactivate_slab.isra.62+0x49d/0x5e0
    nov. 14 14:09:09 cyclope kernel:  ? save_stack_trace+0x16/0x20
    nov. 14 14:09:09 cyclope kernel:  ? init_object+0x88/0x90
    nov. 14 14:09:09 cyclope kernel:  ? ___slab_alloc+0x520/0x590
    nov. 14 14:09:09 cyclope kernel:  ? ___slab_alloc+0x520/0x590
    nov. 14 14:09:09 cyclope kernel:  ? kasan_check_write+0x14/0x20
    nov. 14 14:09:09 cyclope kernel:  ? memcg_kmem_get_cache+0x970/0x970
    nov. 14 14:09:09 cyclope kernel:  ? kasan_unpoison_shadow+0x35/0x50
    nov. 14 14:09:09 cyclope kernel:  ? glob_match+0x730/0x730
    nov. 14 14:09:09 cyclope kernel:  ? kmem_cache_alloc+0x225/0x280
    nov. 14 14:09:09 cyclope kernel:  ? getname_flags+0xb8/0x510
    nov. 14 14:09:09 cyclope kernel:  ? mm_fault_error+0x2e0/0x2e0
    nov. 14 14:09:09 cyclope kernel:  ? getname_flags+0xf6/0x510
    nov. 14 14:09:09 cyclope kernel:  ? ptregs_sys_vfork+0x10/0x10
    nov. 14 14:09:09 cyclope kernel:  SyS_execve+0x2c/0x40
    nov. 14 14:09:09 cyclope kernel:  do_syscall_64+0x228/0x650
    nov. 14 14:09:09 cyclope kernel:  ? syscall_return_slowpath+0x2f0/0x2f0
    nov. 14 14:09:09 cyclope kernel:  ? syscall_return_slowpath+0x167/0x2f0
    nov. 14 14:09:09 cyclope kernel:  ? prepare_exit_to_usermode+0x220/0x220
    nov. 14 14:09:09 cyclope kernel:  ? prepare_exit_to_usermode+0xda/0x220
    nov. 14 14:09:09 cyclope kernel:  ? perf_trace_sys_enter+0x1060/0x1060
    nov. 14 14:09:09 cyclope kernel:  ? __put_user_4+0x1c/0x30
    nov. 14 14:09:09 cyclope kernel:  entry_SYSCALL64_slow_path+0x25/0x25
    nov. 14 14:09:09 cyclope kernel: RIP: 0033:0x7f9320f23637
    nov. 14 14:09:09 cyclope kernel: RSP: 002b:00007fff783be338 EFLAGS: 00000202 ORIG_RAX: 000000000000003b
    nov. 14 14:09:09 cyclope kernel: RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9320f23637
    nov. 14 14:09:09 cyclope kernel: RDX: 0000558c35002a70 RSI: 0000558c3505bd10 RDI: 0000558c35018b90
    nov. 14 14:09:09 cyclope kernel: RBP: 0000558c34b63ae8 R08: 0000558c3505bd10 R09: 0000000000000080
    nov. 14 14:09:09 cyclope kernel: R10: 0000000000000095 R11: 0000000000000202 R12: 0000000000000001
    nov. 14 14:09:09 cyclope kernel: R13: 0000558c35018b90 R14: 0000558c3505bd18 R15: 0000558c3505bd10

Fixes: 4227c333f65c ("apparmor: Move path lookup to using preallocated buffers")
BugLink: http://bugs.launchpad.net/bugs/173228
Reported-by: Alban Browaeys <[email protected]>
Signed-off-by: John Johansen <[email protected]>

apparmor: fix profile attachment for special unconfined profiles

It used to be that unconfined would never attach. However that is not
the case anymore as some special profiles can be marked as unconfined,
that are not the namespaces unconfined profile, and may have an
attachment.

Fixes: f1bd904175e8 ("apparmor: add the base fns() for domain labels")
Signed-off-by: John Johansen <[email protected]>

apparmor: ensure that undecidable profile attachments fail

Profiles that have an undecidable overlap in their attachments are
being incorrectly handled. Instead of failing to attach the first one
encountered is being used.

eg.
  profile A /** { .. }
  profile B /*foo { .. }

have an unresolvable longest left attachment, they both have an exact
match on / and then have an overlapping expression that has no clear
winner.

Currently the winner will be the profile that is loaded first which
can result in non-deterministic behavior. Instead in this situation
the exec should fail.

Fixes: 898127c34ec0 ("AppArmor: functions for domain transitions")
Signed-off-by: John Johansen <[email protected]>

apparmor: fix leak of null profile name if profile allocation fails

Fixes: d07881d2edb0 ("apparmor: move new_null_profile to after profile lookup fns()")
Reported-by: Seth Arnold <[email protected]>
Signed-off-by: John Johansen <[email protected]>

apparmor: remove unused redundant variable stop

The boolean variable 'stop' is being set but never read. This
is a redundant variable and can be removed.

Cleans up clang warning: Value stored to 'stop' is never read

Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: John Johansen <[email protected]>

apparmor: Fix bool initialization/comparison

Bool initializations should use true and false. Bool tests don't need
comparisons.

Signed-off-by: Thomas Meyer <[email protected]>
Signed-off-by: John Johansen <[email protected]>

apparmor: initialized returned struct aa_perms

gcc-4.4 points out suspicious code in compute_mnt_perms, where
the aa_perms structure is only partially initialized before getting
returned:

security/apparmor/mount.c: In function 'compute_mnt_perms':
security/apparmor/mount.c:227: error: 'perms.prompt' is used uninitialized in this function
security/apparmor/mount.c:227: error: 'perms.hide' is used uninitialized in this function
security/apparmor/mount.c:227: error: 'perms.cond' is used uninitialized in this function
security/apparmor/mount.c:227: error: 'perms.complain' is used uninitialized in this function
security/apparmor/mount.c:227: error: 'perms.stop' is used uninitialized in this function
security/apparmor/mount.c:227: error: 'perms.deny' is used uninitialized in this function

Returning or assigning partially initialized structures is a bit tricky,
in particular it is explicitly allowed in c99 to assign a partially
initialized structure to another, as long as only members are read that
have been initialized earlier. Looking at what various compilers do here,
the version that produced the warning copied uninitialized stack data,
while newer versions (and also clang) either set the other members to
zero or don't update the parts of the return buffer that are not modified
in the temporary structure, but they never warn about this.

In case of apparmor, it seems better to be a little safer and always
initialize the aa_perms structure. Most users already do that, this
changes the remaining ones, including the one instance that I got the
warning for.

Fixes: fa488437d0f9 ("apparmor: add mount mediation")
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Seth Arnold <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: John Johansen <[email protected]>

powerpc/vas: Export chip_to_vas_id()

Export the symbol chip_to_vas_id() to fix a build failure when
CONFIG_CRYPTO_DEV_NX_COMPRESS_POWERNV=m.

Fixes: d4ef61b5e895 ("powerpc/vas, nx-842: Define and use chip_to_vas_id()")
Reported-by: Haren Myneni <[email protected]>
Reported-by: Josh Boyer <[email protected]>
Signed-off-by: Sukadev Bhattiprolu <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>

Merge ath-current from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git

ath.git fixes for 4.15. Major changes:

ath10k

* fix CCMP-256, GCMP and GCMP-256 in raw mode, they never worked with raw mode

wcn36xx

* fix device tree node search

xfs: abstract out dev_t conversions

And move them to xfs_linux.h so that xfsprogs can stub them out more
easily.

Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>

xfs: fix memory leak in xfs_iext_free_last_leaf

found the issue by kmemleak.
unreferenced object 0xffff8800674611c0 (size 16):
    xfs_iext_insert+0x82a/0xa90 [xfs]
    xfs_bmap_add_extent_hole_delay+0x1e5/0x5b0 [xfs]
    xfs_bmapi_reserve_delalloc+0x483/0x530 [xfs]
    xfs_file_iomap_begin+0xac8/0xd40 [xfs]
    iomap_apply+0xb8/0x1b0
    iomap_file_buffered_write+0xac/0xe0
    xfs_file_buffered_aio_write+0x198/0x420 [xfs]
    xfs_file_write_iter+0x23f/0x2a0 [xfs]
    __vfs_write+0x23e/0x340
    vfs_write+0xe9/0x240
    SyS_write+0xa1/0x120
    do_syscall_64+0xda/0x260

Signed-off-by: Shu Wang <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>

x86/pkeys/selftests: Fix protection keys write() warning

write() is marked as having a must-check return value.  Check it and
abort if we fail to write an error message from a signal handler.

Signed-off-by: Dave Hansen <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>

x86/pkeys/selftests: Rename 'si_pkey' to 'siginfo_pkey'

'si_pkey' is now #defined to be the name of the new siginfo field that
protection keys uses.  Rename it not to conflict.

Signed-off-by: Dave Hansen <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>

x86/mpx/selftests: Fix up weird arrays

The MPX hardware data structurse are defined in a weird way: they define
their size in bytes and then union that with the type with which we want
to access them.

Yes, this is weird, but it does work.  But, new GCC's complain that we
are accessing the array out of bounds.  Just make it a zero-sized array
so gcc will stop complaining.  There was not really a bug here.

Signed-off-by: Dave Hansen <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>

x86/pkeys: Update documentation about availability

Now that CPUs that implement Memory Protection Keys are publicly
available we can be a bit less oblique about where it is available.

Signed-off-by: Dave Hansen <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>

apparmor: fix spelling mistake: "resoure" -> "resource"

Trivial fix to spelling mistake in comment and also with text in
audit_resource call.

Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: John Johansen <[email protected]>

sched/deadline: Don't use dubious signed bitfields

It doesn't cause a run-time bug, but these bitfields should be unsigned.
When it's signed ->dl_throttled is set to either 0 or -1, instead of
0 and 1 as expected.

The sched.h file is included into tons of places so Sparse generates
a flood of warnings like this:

  ./include/linux/sched.h:477:54: error: dubious one-bit signed bitfield

Reported-by: Matthew Wilcox <[email protected]>
Reported-by: Xin Long <[email protected]>
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Luca Abeni <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: luca abeni <[email protected]>
Link: http://lkml.kernel.org/r/20171013070121.dzcncojuj2f4utij@mwanda
Signed-off-by: Ingo Molnar <[email protected]>

Merge tag 'fbdev-v4.15' of git://github.com/bzolnier/linux

Pull fbdev updates from Bartlomiej Zolnierkiewicz:
 "There is nothing really major here (though removal of the dead igafb
  driver stands out in diffstat).

  Summary:

   - convert timers to use timer_setup() (Kees Cook, Thierry Reding)

   - fix panels support on iMX boards in mxsfb driver (Stefan Agner)

   - fix timeout on EDID read in udlfb driver (Ladislav Michl)

   - add missing modes to fix out of bounds access in controlfb driver
     (Geert Uytterhoeven)

   - update initialisation paths in sa1100fb driver to be more robust
     (Russell King)

   - fix error handling path of ->probe method in au1200fb driver
     (Christophe JAILLET)

   - fix handling of cases when either panel or crt is defined in
     sm501fb driver (Sudip Mukherjee, Colin Ian King)

   - add ability to the Goldfish FB driver to be recognized by OS via DT
     (Aleksandar Markovic)

   - structures constifications (Bhumika Goyal)

   - misc fixes (Allen Pais, Gustavo A. R. Silva, Dan Carpenter)

   - misc cleanups (Colin Ian King, Himanshu Jha, Markus Elfring)

   - remove dead igafb driver"

* tag 'fbdev-v4.15' of git://github.com/bzolnier/linux: (42 commits)
  OMAPFB: prevent buffer underflow in omapfb_parse_vram_param()
  video: fbdev: sm501fb: fix potential null pointer dereference on fbi
  fbcon: Initialize ops->info early
  video: fbdev: Convert timers to use timer_setup()
  video: fbdev: pxa3xx_gcu: Convert timers to use timer_setup()
  fbdev: controlfb: Add missing modes to fix out of bounds access
  video: fbdev: sis_main: mark expected switch fall-throughs
  video: fbdev: cirrusfb: mark expected switch fall-throughs
  video: fbdev: aty: radeon_pm: mark expected switch fall-throughs
  video: fbdev: sm501fb: mark expected switch fall-through in sm501fb_blank_crt
  video: fbdev: intelfb: remove redundant variables
  video/fbdev/dnfb: Use common error handling code in dnfb_probe()
  sm501fb: suspend and resume fb if it exists
  sm501fb: unregister framebuffer only if registered
  sm501fb: deallocate colormap only if allocated
  video: goldfishfb: Add support for device tree bindings
  Documentation: Add device tree binding for Goldfish FB driver
  video: udlfb: Fix read EDID timeout
  video: fbdev: remove dead igafb driver
  video: fbdev: mxsfb: fix pixelclock polarity
  ...

Merge tag 'devicetree-fixes-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree fixes from Rob Herring:

 - Remove mc13892 as a trivial device

 - Improve of_find_node_by_name() documentation

 - Fix unit test dtc warnings

 - Clean-ups of USB binding documentation

 - Fix potential NULL deref in of_pci_map_rid

* tag 'devicetree-fixes-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: trivial-devices: Remove fsl,mc13892
  of: Document exactly what of_find_node_by_name() puts
  of: unittest: disable interrupts_property warning
  of: unittest: let dtc generate __local_fixups__
  dt-bindings: usb: document hub and host-controller properties
  dt-bindings: usb: clean up compatible property
  dt-bindings: usb: fix reg-property port-number range
  dt-bindings: usb: fix example hub node name
  of/pci: Fix theoretical NULL dereference

Merge tag 'jfs-4.15-2' of git://github.com/kleikamp/linux-shaggy

Pull jfs fixlet from Dave Kleikamp:
 "Update jfs git tree in MAINTAINERS"

* tag 'jfs-4.15-2' of git://github.com/kleikamp/linux-shaggy:
  MAINTAINERS: fix jfs tree location

x86/umip: Print a warning into the syslog if UMIP-protected instructions are used

Print a rate-limited warning when a user-space program attempts to execute
any of the instructions that UMIP protects (i.e., SGDT, SIDT, SLDT, STR
and SMSW).

This is useful, because when CONFIG_X86_INTEL_UMIP=y is selected and
supported by the hardware, user space programs that try to execute such
instructions will receive a SIGSEGV signal that they might not expect.

In the specific cases for which emulation is provided (instructions SGDT,
SIDT and SMSW in protected and virtual-8086 modes), no signal is
generated. However, a warning is helpful to encourage updates in such
programs to avoid the use of such instructions.

Warnings are printed via a customized printk() function that also provides
information about the program that attempted to use the affected
instructions.

Utility macros are defined to wrap umip_printk() for the error and warning
kernel log levels.

While here, replace an existing call to the generic rate-limited pr_err()
with the new umip_pr_err().

Suggested-by: Linus Torvalds <[email protected]>
Signed-off-by: Ricardo Neri <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi V. Shankar <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/1511233476-17088-1-git-send-email-ricardo.neri-calderon@linux.intel.com
Signed-off-by: Ingo Molnar <[email protected]>

drm/amdgpu: don't skip attributes when powerplay is enabled

The function checks non-powerplay structures so regressed when
the pp_enabled check was removed.  This should ideally be
implemented similarly for powerplay.

Fixes: 6d07fe7bcae57 ("drm/amdgpu: delete pp_enable in adev")
Tested-by: Dieter Nützel <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>

Merge branch 'bpf-offload-fixes'

Jakub Kicinski says:

====================
This series addresses some late comments and moves checking if program
has been loaded for the correct device to the drivers.  There are also
some problems with net namespaces which I didn't take into consideration.
On the kernel side we will now simply ignore namespace moves.  Since the
user space API is not reporting any namespace identification we have to
remove the ifindex until a correct way of reporting is agreed upon.

v2:
 - fix ext ack reporting for XDP (David A);
 - add Jiri's Ack.
====================

Signed-off-by: Daniel Borkmann <[email protected]>

bpf: make bpf_prog_offload_verifier_prep() static inline

Header implementation of bpf_prog_offload_verifier_prep() which
is used if CONFIG_NET=n should be a static inline.

Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>

bpf: revert report offload info to user space

This reverts commit bd601b6ada11 ("bpf: report offload info to user
space").  The ifindex by itself is not sufficient, we should provide
information on which network namespace this ifindex belongs to.
After considering some options we concluded that it's best to just
remove this API for now, and rework it in -next.

Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>

bpftool: revert printing program device bound info

This reverts commit 928631e05495 ("bpftool: print program device bound
info").  We will remove this API and redo it right in -next.

Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>

bpf: offload: ignore namespace moves

We are currently destroying the device offload state when device
moves to another net namespace.  This doesn't break with current
NFP code, because offload state is not used on program removal,
but it's not correct behaviour.

Ignore the device unregister notifications on namespace move.

Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>

bpf: turn bpf_prog_get_type() into a wrapper

bpf_prog_get_type() is identical to bpf_prog_get_type_dev(),
with false passed as attach_drv.  Instead of keeping it as
an exported symbol turn it into static inline wrapper.

Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Acked-by: Alexei Starovoitov <[email protected]>
Acked-by: Daniel Borkmann <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>

net: xdp: don't allow device-bound programs in driver mode

Currently device-bound programs are not able to run on the host
to save resources (host JIT is not invoked).  Don't allow XDP
programs to be attached without the HW_MODE flag.  In theory
if program is already translated for device offload the driver
should choose to offload it instead of loading it in the driver.
However, offloading translated program may still fail resulting
in device-bound program being run on the host.

Prevent this by refusing to attach device bound programs if
XDP_FLAGS_HW_MODE is not set.

Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Acked-by: Alexei Starovoitov <[email protected]>
Acked-by: Daniel Borkmann <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>

bpf: offload: move offload device validation out to the drivers

With TC shared block changes we can't depend on correct netdev
pointer being available in cls_bpf.  Move the device validation
to the driver.  Core will only make sure that offloaded programs
are always attached in the driver (or in HW by the driver).  We
trust that drivers which implement offload callbacks will perform
necessary checks.

Moving the checks to the driver is generally a useful thing,
in practice the check should be against a switchdev instance,
not a netdev, given that most ASICs will probably allow using
the same program on many ports.

Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Acked-by: Alexei Starovoitov <[email protected]>
Acked-by: Daniel Borkmann <[email protected]>
Acked-by: Jiri Pirko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>

bpf: offload: rename the ifindex field

bpf_target_prog seems long and clunky, rename it to prog_ifindex.
We don't want to call this field just ifindex, because maps
may need a similar field in the future and bpf_attr members for
programs and maps are unnamed.

Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Acked-by: Alexei Starovoitov <[email protected]>
Acked-by: Daniel Borkmann <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>

bpf: offload: limit offload to cls_bpf and xdp programs only

We are currently only allowing attachment of device-bound
cls_bpf and XDP programs.  Make this restriction explicit in
the BPF offload code.  This way we can potentially reuse the
ifindex field in the future.

Since XDP and cls_bpf programs can only be loaded by admin,
we can drop the explicit capability check from offload code.

Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Acked-by: Alexei Starovoitov <[email protected]>
Acked-by: Daniel Borkmann <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>

bpf: offload: add comment warning developers about double destroy

Offload state may get destroyed either because the device for which
it was constructed is going away, or because the refcount of bpf
program itself has reached 0.  In both of those cases we will call
__bpf_prog_offload_destroy() to unlink the offload from the device.
We may in fact call it twice, which works just fine, but we should
make clear this is intended and caution others trying to extend the
function.

Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Acked-by: Alexei Starovoitov <[email protected]>
Acked-by: Daniel Borkmann <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>

drm/amd/pp: fix typecast error in powerplay.

resulted in unexpected data truncation

Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Rex Zhu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]

dt-bindings: rtc: imxdi: Improve the bindings text

Improve the bindings text by doing the following changes:

- Remove the i.MX53 reference, as the RTC on i.MX53 is a different hardware
- Add 'clocks' to the list of required properties
- Explain that the optional security violation irq is the second entry
- Use the real unit address and irq numbers for i.MX25

Signed-off-by: Fabio Estevam <[email protected]>
Acked-by: Juergen Borleis <[email protected]>
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>

rtc: sc27xx: Add Spreadtrum SC27xx PMIC RTC driver

This patch adds the Spreadtrum RTC driver, which embedded in the
Spreadtrum SC27xx series PMICs.

Signed-off-by: Baolin Wang <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>

platform/x86: dell-smbios-wmi: Disable userspace interface if missing hotfix

The Dell SMBIOS WMI interface will fail for some more complex calls unless
a WMI hotfix has been included.  Most platforms have this fix available in
a maintenance BIOS release.  In the case the driver is loaded on a
platform without this fix, disable the userspace interface.

A hotfix indicator is present in the dell-wmi-descriptor that represents
whether or not more complex calls will work properly.

"Simple" calls such as those used by dell-laptop and dell-wmi will continue
to work properly so dell-smbios-wmi should not be blocked from binding and
being used as the dell-smbios dispatcher.

Suggested-by: Girish Prakash <[email protected]>
Signed-off-by: Mario Limonciello <[email protected]>
Signed-off-by: Darren Hart (VMware) <[email protected]>

Add optional check for bad kernel-doc comments

Implement a '-none' output mode for kernel-doc which will only output
warning messages, and suppresses the warning message about there being
no kernel-doc in the file.

If the build has requested additional warnings, automatically check all
.c files.  This patch does not check .h files.  Enabling the warning
by default would add about 1300 warnings, so it's default off for now.
People who care can use this to check they didn't break the docs and
maybe we'll get all the warnings fixed and be able to enable this check
by default in the future.

Signed-off-by: Matthew Wilcox <[email protected]>
Signed-off-by: Jonathan Corbet <[email protected]>

dt-bindings: trivial-devices: Remove fsl,mc13892

This device's bindings are not trivial: Additional properties are
documented in in Documentation/devicetree/bindings/mfd/mc13xxx.txt.

Signed-off-by: Jonathan Neuschäfer <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
Signed-off-by: Rob Herring <[email protected]>

of: Document exactly what of_find_node_by_name() puts

It isn't clear if this function of_node_put()s the 'from'
argument, or the node it searches. Clearly indicate which
variable is touched. Fold in some more fixes from Randy too
because we're in the area.

Cc: Randy Dunlap <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Acked-by: Randy Dunlap <[email protected]>
Signed-off-by: Rob Herring <[email protected]>

MAINTAINERS: fix jfs tree location

JFS tree has been moved to github.

Signed-off-by: Tom Saeger <[email protected]>
Signed-off-by: Dave Kleikamp <[email protected]>