Merge tag 'trace-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull more tracing updates from Steven Rostedt:
"A few more minor updates:
- Show the tgid mappings for user space trace tools to use
- Fix and optimize the comm and tgid cache recording
- Sanitize derived kprobe names
- Ftrace selftest updates
- trace file header fix
- Update of Documentation/trace/ftrace.txt
- Compiler warning fixes
- Fix possible uninitialized variable"
* tag 'trace-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix uninitialized variable in match_records()
ftrace: Remove an unneeded NULL check
ftrace: Hide cached module code for !CONFIG_MODULES
tracing: Do note expose stack_trace_filter without DYNAMIC_FTRACE
tracing: Update Documentation/trace/ftrace.txt
tracing: Fixup trace file header alignment
selftests/ftrace: Add a testcase for kprobe event naming
selftests/ftrace: Add a test to probe module functions
selftests/ftrace: Update multiple kprobes test for powerpc
trace/kprobes: Sanitize derived event names
tracing: Attempt to record other information even if some fail
tracing: Treat recording tgid for idle task as a success
tracing: Treat recording comm for idle task as a success
tracing: Add saved_tgids file to show cached pid to tgid mappings
Chuck Lever [Thu, 8 Jun 2017 15:53:24 +0000 (11:53 -0400)]
xprtrdma: Fix documenting comments in frwr_ops.c
Clean up.
FASTREG and LOCAL_INV WRs are typically not signaled. localinv_wake
is used for the last LOCAL_INV WR in a chain, which is always
signaled. The documenting comments should reflect that.
Chuck Lever [Thu, 8 Jun 2017 15:53:08 +0000 (11:53 -0400)]
xprtrdma: FMR does not need list_del_init()
Clean up.
Commit 38f1932e60ba ("xprtrdma: Remove FMRs from the unmap list
after unmapping") utilized list_del_init() to try to prevent some
list corruption. The corruption was actually caused by the reply
handler racing with a signal. Now that MR invalidation is properly
serialized, list_del_init() can safely be replaced.
Chuck Lever [Thu, 8 Jun 2017 15:53:00 +0000 (11:53 -0400)]
xprtrdma: Demote "connect" log messages
Some have complained about the log messages generated when xprtrdma
opens or closes a connection to a server. When an NFS mount is
mostly idle these can appear every few minutes as the client idles
out the connection and reconnects.
Connection and disconnection is a normal part of operation, and not
exceptional, so change these to dprintk's for now. At some point
all of these will be converted to tracepoints, but that's for
another day.
Chuck Lever [Thu, 8 Jun 2017 15:52:52 +0000 (11:52 -0400)]
NFSv4.1: Use seqid returned by EXCHANGE_ID after state migration
Transparent State Migration copies a client's lease state from the
server where a filesystem used to reside to the server where it now
resides. When an NFSv4.1 client first contacts that destination
server, it uses EXCHANGE_ID to detect trunking relationships.
The lease that was copied there is returned to that client, but the
destination server sets EXCHGID4_FLAG_CONFIRMED_R when replying to
the client. This is because the lease was confirmed on the source
server (before it was copied).
When CONFIRMED_R is set, the client throws away the sequence ID
returned by the server. During a Transparent State Migration, however
there's no other way for the client to know what sequence ID to use
with a lease that's been migrated.
Therefore, the client must save and use the contrived slot sequence
value returned by the destination server even when CONFIRMED_R is
set.
Note that some servers always return a seqid of 1 after a migration.
Chuck Lever [Thu, 8 Jun 2017 15:52:44 +0000 (11:52 -0400)]
NFSv4.1: Handle EXCHGID4_FLAG_CONFIRMED_R during NFSv4.1 migration
Transparent State Migration copies a client's lease state from the
server where a filesystem used to reside to the server where it now
resides. When an NFSv4.1 client first contacts that destination
server, it uses EXCHANGE_ID to detect trunking relationships.
The lease that was copied there is returned to that client, but the
destination server sets EXCHGID4_FLAG_CONFIRMED_R when replying to
the client. This is because the lease was confirmed on the source
server (before it was copied).
Normally, when CONFIRMED_R is set, a client purges the lease and
creates a new one. However, that throws away the entire benefit of
Transparent State Migration.
Therefore, the client must not purge that lease when it is possible
that Transparent State Migration has occurred.
Chuck Lever [Thu, 8 Jun 2017 15:52:36 +0000 (11:52 -0400)]
xprtrdma: Don't defer MR recovery if ro_map fails
Deferred MR recovery does a DMA-unmapping of the MW. However, ro_map
invokes rpcrdma_defer_mr_recovery in some error cases where the MW
has not even been DMA-mapped yet.
Avoid a DMA-unmapping error replacing rpcrdma_defer_mr_recovery.
Also note that if ib_dma_map_sg is asked to map 0 nents, it will
return 0. So the extra "if (i == 0)" check is no longer needed.
Fixes: 42fe28f60763 ("xprtrdma: Do not leak an MW during a DMA ...") Fixes: 505bbe64dd04 ("xprtrdma: Refactor MR recovery work queues") Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Anna Schumaker <[email protected]>
Chuck Lever [Thu, 8 Jun 2017 15:52:28 +0000 (11:52 -0400)]
xprtrdma: Fix FRWR invalidation error recovery
When ib_post_send() fails, all LOCAL_INV WRs past @bad_wr have to be
examined, and the MRs reset by hand.
I'm not sure how the existing code can work by comparing R_keys.
Restructure the logic so that instead it walks the chain of WRs,
starting from the first bad one.
Make sure to wait for completion if at least one WR was actually
posted. Otherwise, if the ib_post_send fails, we can end up
DMA-unmapping the MR while LOCAL_INV operations are in flight.
Commit 7a89f9c626e3 ("xprtrdma: Honor ->send_request API contract")
added the rdma_disconnect() call site. The disconnect actually
causes more problems than it solves, and SQ overruns happen only as
a result of software bugs. So remove it.
Fixes: d7a21c1bed54 ("xprtrdma: Reset MRs in frwr_op_unmap_sync()") Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Anna Schumaker <[email protected]>
Chuck Lever [Thu, 8 Jun 2017 15:52:20 +0000 (11:52 -0400)]
xprtrdma: Fix client lock-up after application signal fires
After a signal, the RPC client aborts synchronous RPCs running on
behalf of the signaled application.
The server is still executing those RPCs, and will write the results
back into the client's memory when it's done. By the time the server
writes the results, that memory is likely being used for other
purposes. Therefore xprtrdma has to immediately invalidate all
memory regions used by those aborted RPCs to prevent the server's
writes from clobbering that re-used memory.
With FMR memory registration, invalidation takes a relatively long
time. In fact, the invalidation is often still running when the
server tries to write the results into the memory regions that are
being invalidated.
This sets up a race between two processes:
1. After the signal, xprt_rdma_free calls ro_unmap_safe.
2. While ro_unmap_safe is still running, the server replies and
rpcrdma_reply_handler runs, calling ro_unmap_sync.
Both processes invoke ib_unmap_fmr on the same FMR.
The mlx4 driver allows two ib_unmap_fmr calls on the same FMR at
the same time, but HCAs generally don't tolerate this. Sometimes
this can result in a system crash.
If the HCA happens to survive, rpcrdma_reply_handler continues. It
removes the rpc_rqst from rq_list and releases the transport_lock.
This enables xprt_rdma_free to run in another process, and the
rpc_rqst is released while rpcrdma_reply_handler is still waiting
for the ib_unmap_fmr call to finish.
But further down in rpcrdma_reply_handler, the transport_lock is
taken again, and "rqst" is dereferenced. If "rqst" has already been
released, this triggers a general protection fault. Since bottom-
halves are disabled, the system locks up.
Address both issues by reversing the order of the xprt_lookup_rqst
call and the ro_unmap_sync call. Introduce a separate lookup
mechanism for rpcrdma_req's to enable calling ro_unmap_sync before
xprt_lookup_rqst. Now the handler takes the transport_lock once
and holds it for the XID lookup and RPC completion.
Chuck Lever [Thu, 8 Jun 2017 15:52:04 +0000 (11:52 -0400)]
xprtrdma: Pass only the list of registered MRs to ro_unmap_sync
There are rare cases where an rpcrdma_req can be re-used (via
rpcrdma_buffer_put) while the RPC reply handler is still running.
This is due to a signal firing at just the wrong instant.
Since commit 9d6b04097882 ("xprtrdma: Place registered MWs on a
per-req list"), rpcrdma_mws are self-contained; ie., they fully
describe an MR and scatterlist, and no part of that information is
stored in struct rpcrdma_req.
As part of closing the above race window, pass only the req's list
of registered MRs to ro_unmap_sync, rather than the rpcrdma_req
itself.
Some extra transport header sanity checking is removed. Since the
client depends on its own recollection of what memory had been
registered, there doesn't seem to be a way to abuse this change.
And, the check was not terribly effective. If the client had sent
Read chunks, the "list_empty" test is negative in both of the
removed cases, which are actually looking for Write or Reply
chunks.
Chuck Lever [Thu, 8 Jun 2017 15:51:56 +0000 (11:51 -0400)]
xprtrdma: Pre-mark remotely invalidated MRs
There are rare cases where an rpcrdma_req and its matched
rpcrdma_rep can be re-used, via rpcrdma_buffer_put, while the RPC
reply handler is still using that req. This is typically due to a
signal firing at just the wrong instant.
As part of closing this race window, avoid using the wrong
rpcrdma_rep to detect remotely invalidated MRs. Mark MRs as
invalidated while we are sure the rep is still OK to use.
Chuck Lever [Thu, 8 Jun 2017 15:51:48 +0000 (11:51 -0400)]
xprtrdma: On invalidation failure, remove MWs from rl_registered
Callers assume the ro_unmap_sync and ro_unmap_safe methods empty
the list of registered MRs. Ensure that all paths through
fmr_op_unmap_sync() remove MWs from that list.
Fixes: 9d6b04097882 ("xprtrdma: Place registered MWs on a ... ") Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Anna Schumaker <[email protected]>
NFS: check for nfs_refresh_inode() errors in nfs_fhget()
If an NFS server returns a filehandle that we have previously
seen, and reports a different type, then nfs_refresh_inode()
will log a warning and return an error.
nfs_fhget() does not check for this error and may return an
inode with a different type than the one that the server
reported.
This is likely to cause confusion, and is one way that
->open_context() could return a directory inode as discussed
in the previous patch.
So if nfs_refresh_inode() returns and error, return that error
from nfs_fhget() to avoid the confusion propagating.
NFS: guard against confused server in nfs_atomic_open()
A confused server could return a filehandle for an
NFSv4 OPEN request, which it previously returned for a directory.
So the inode returned by ->open_context() in nfs_atomic_open()
could conceivably be a directory inode.
This has particular implications for the call to
nfs_file_set_open_context() in nfs_finish_open().
If that is called on a directory inode, then the nfs_open_context
that gets stored in the filp->private_data will be linked to
nfs_inode->open_files.
When the directory is closed, nfs_closedir() will (ultimately)
free the ->private_data, but not unlink it from nfs_inode->open_files
(because it doesn't expect an nfs_open_context there).
Subsequently the memory could get used for something else and eventually
if the ->open_files list is walked, the walker will fall off the end and
crash.
So: change nfs_finish_open() to only call nfs_file_set_open_context()
for regular-file inodes.
This failure mode has been seen in a production setting (unknown NFS
server implementation). The kernel was v3.0 and the specific sequence
seen would not affect more recent kernels, but I think a risk is still
present, and caution is wise.
NFS: only invalidate dentrys that are clearly invalid.
Since commit bafc9b754f75 ("vfs: More precise tests in d_invalidate")
in v3.18, a return of '0' from ->d_revalidate() will cause the dentry
to be invalidated even if it has filesystems mounted on or it or on a
descendant. The mounted filesystem is unmounted.
This means we need to be careful not to return 0 unless the directory
referred to truly is invalid. So -ESTALE or -ENOENT should invalidate
the directory. Other errors such a -EPERM or -ERESTARTSYS should be
returned from ->d_revalidate() so they are propagated to the caller.
A particular problem can be demonstrated by:
1/ mount an NFS filesystem using NFSv3 on /mnt
2/ mount any other filesystem on /mnt/foo
3/ ls /mnt/foo
4/ turn off network, or otherwise make the server unable to respond
5/ ls /mnt/foo &
6/ cat /proc/$!/stack # note that nfs_lookup_revalidate is in the call stack
7/ kill -9 $! # this results in -ERESTARTSYS being returned
8/ observe that /mnt/foo has been unmounted.
This patch changes nfs_lookup_revalidate() to only treat
-ESTALE from nfs_lookup_verify_inode() and
-ESTALE or -ENOENT from ->lookup()
as indicating an invalid inode. Other errors are returned.
Also nfs_check_inode_attributes() is changed to return -ESTALE rather
than -EIO. This is consistent with the error returned in similar
circumstances from nfs_update_inode().
As this bug allows any user to unmount a filesystem mounted on an NFS
filesystem, this fix is suitable for stable kernels.
Upon receiving a stateid error such as BAD_STATEID, the client
should retry the operation against the MDS before deciding to
do stateid recovery.
Previously, the code would initiate state recovery and it could
lead to a race in a state manager that could chose an incorrect
recovery method which would lead to the EIO failure for the
application.
Commit fabbbee0eb0f "PNFS fix fallback to MDS if got error on
commit to DS" moved the pnfs_set_lo_fail() to unhandled errors
which was not correct and lead to a kernel oops on umount.
Instead, fix the original EACCESS on commit to DS error by
getting the new layout and re-doing the IO.
Fixes: fabbbee0eb0f ("PNFS fix fallback to MDS if got error on commit to DS") Signed-off-by: Olga Kornievskaia <[email protected]> Cc: [email protected] # v4.12 Signed-off-by: Anna Schumaker <[email protected]>
Tuo Chen Peng [Wed, 7 Jun 2017 06:42:44 +0000 (23:42 -0700)]
nfs: Fix fscache stat printing in nfs_show_stats()
nfs_show_stats() was incorrectly reading statistics for bytes when printing that
for fsc. It caused files like /proc/self/mountstats to report incorrect fsc
statistics for NFS mounts.
Commit 8ef9b0b9e1c0 open-coded nfs_pgarray_set(), and left out the
initialization of the nfs_page_array's npages. This mistake didn't show up
until testing with block layouts, and there shows that all pNFS reads
return -EIO.
Trond Myklebust [Tue, 20 Jun 2017 23:35:38 +0000 (19:35 -0400)]
NFS: Fix commit policy for non-blocking calls to nfs_write_inode()
Now that the writes will schedule a commit on their own, we don't
need nfs_write_inode() to schedule one if there are outstanding
writes, and we're being called in non-blocking mode.
Trond Myklebust [Tue, 20 Jun 2017 23:35:37 +0000 (19:35 -0400)]
NFS: Ensure we commit after writeback is complete
If the page cache is being flushed, then we want to ensure that we
do start a commit once the pages are done being flushed.
If we just wait until all I/O is done to that file, we can end up
livelocking until the balance_dirty_pages() mechanism puts its
foot down and forces I/O to stop.
So instead we do more or less the same thing that O_DIRECT does,
and set up a counter to tell us when the flush is done,
Trond Myklebust [Tue, 20 Jun 2017 23:35:39 +0000 (19:35 -0400)]
SUNRPC: Make slot allocation more reliable
In xprt_alloc_slot(), the spin lock is only needed to provide atomicity
between the atomic_add_unless() failure and the call to xprt_add_backlog().
We do not actually need to hold it across the memory allocation itself.
By dropping the lock, we can use a more resilient GFP_NOFS allocation,
just as we now do in the rest of the RPC client code.
NFS: nfs_rename() - revalidate directories on -ERESTARTSYS
An interrupted rename will leave the old dentry behind if the rename
succeeds. Fix this by forcing a lookup the next time through
->d_revalidate.
A previous attempt at solving this problem took the approach to complete
the work of the rename asynchronously, however that approach was wrong
since it would allow the d_move() to occur after the directory's i_mutex
had been dropped by the original process.
Anna Schumaker [Fri, 16 Jun 2017 16:06:59 +0000 (12:06 -0400)]
NFS: Set FATTR4_WORD0_TYPE for . and .. entries
The current code worked okay for getdents(), but getdents64() expects
the d_type field to get filled out properly in the stat structure.
Setting this field fixes xfstests generic/401.
Drop the resp argument as it can trivially be derived from the rqstp
argument. With that all functions now have the same prototype, and we
can remove the unsafe casting to kxdrproc_t.
Drop the argp argument as it can trivially be derived from the rqstp
argument. With that all functions now have the same prototype, and we
can remove the unsafe casting to kxdrproc_t.
Drop the p and resp arguments as they are always NULL or can trivially
be derived from the rqstp argument. With that all functions now have the
same prototype, and we can remove the unsafe casting to kxdrproc_t.
Drop the argp and resp arguments as they can trivially be derived from
the rqstp argument. With that all functions now have the same prototype,
and we can remove the unsafe casting to svc_procfunc as well as the
svc_procfunc typedef itself.
p_count is the only writeable memeber of struct rpc_procinfo, which is
a good candidate to be const-ified as it contains function pointers.
This patch moves it into out out struct rpc_procinfo, and into a
separate writable array that is pointed to by struct rpc_version and
indexed by p_statidx.
- Kees's "rough equivalent to the glibc _FORTIFY_SOURCE=1 feature"
- "stackprotector: ascii armor the stack canary"
- more MM bits
- checkpatch updates
* emailed patches from Andrew Morton <[email protected]>: (96 commits)
writeback: rework wb_[dec|inc]_stat family of functions
ARM: samsung: usb-ohci: move inline before return type
video: fbdev: omap: move inline before return type
video: fbdev: intelfb: move inline before return type
USB: serial: safe_serial: move __inline__ before return type
drivers: tty: serial: move inline before return type
drivers: s390: move static and inline before return type
x86/efi: move asmlinkage before return type
sh: move inline before return type
MIPS: SMP: move asmlinkage before return type
m68k: coldfire: move inline before return type
ia64: sn: pci: move inline before type
ia64: move inline before return type
FRV: tlbflush: move asmlinkage before return type
CRIS: gpio: move inline before return type
ARM: HP Jornada 7XX: move inline before return type
ARM: KVM: move asmlinkage before type
checkpatch: improve the STORAGE_CLASS test
mm, migration: do not trigger OOM killer when migrating memory
drm/i915: use __GFP_RETRY_MAYFAIL
...
Merge tag 'platform-drivers-x86-v4.13-2' of git://git.infradead.org/linux-platform-drivers-x86
Pull more x86 platform driver updates from Darren Hart:
"Add new platform matches for silead_dmi and ideapad-laptop. Several
constify patches for attribute_group structures. Fixes for peaq-wmi
and intel_telemetry.
silead_dmi:
- Add entry for Ployer Momo7w tablet touchscreen
- Add touchscreen info for I.T.Works TW891 2-in-1
* tag 'vfio-v4.13-rc1' of git://github.com/awilliam/linux-vfio:
vfio: Remove unnecessary uses of vfio_container.group_lock
vfio: New external user group/file match
kvm-vfio: Decouple only when we match a group
vfio: Fix group release deadlock
vfio: Use ERR_CAST() instead of open coding it
vfio/pci: Add Intel XXV710 to hidden INTx devices
Merge tag 'rtc-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Here is the pull-request for the RTC subsystem for 4.13.
Subsystem:
- expose non volatile RAM using nvmem instead of open coding in many
drivers. Unfortunately, this option has to be enabled by default to
not break existing users.
- rtctest can now test for cutoff dates, showing when an RTC will
start failing to properly save time and date.
- new RTC registration functions to remove race conditions in drivers
Newly supported RTCs:
- Broadcom STB wake-timer
- Epson RX8130CE
- Maxim IC DS1308
- STMicroelectronics STM32H7
Drivers:
- ds1307: use regmap, use nvmem, more cleanups
- ds3232: temperature reading support
- gemini: renamed to ftrtc010
- m41t80: use CCF to expose the clock
- rv8803: use nvmem
- s3c: many cleanups
- st-lpc: fix y2106 bug"
* tag 'rtc-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (51 commits)
rtc: Remove wrong deprecation comment
nvmem: include linux/err.h from header
rtc: st-lpc: make it robust against y2038/2106 bug
rtc: rtctest: add check for problematic dates
tools: timer: add rtctest_setdate
rtc: ds1307: remove ds1307_remove
rtc: ds1307: use generic nvmem
rtc: ds1307: switch to rtc_register_device
rtc: rv8803: remove rv8803_remove
rtc: rv8803: use generic nvmem support
rtc: rv8803: switch to rtc_register_device
rtc: add generic nvmem support
rtc: at91rm9200: remove race condition
rtc: introduce new registration method
rtc: class separate id allocation from registration
rtc: class separate device allocation from registration
rtc: stm32: add STM32H7 RTC support
dt-bindings: rtc: stm32: add support for STM32H7
rtc: ds1307: add ds1308 variant
rtc: ds3232: add temperature support
...
Merge tag 'for-linus-20170713' of git://git.infradead.org/linux-mtd
Pull MTD updates from Brian Norris:
"General updates:
- Cleanups and additional flash support for "dataflash" driver
- new driver for mchp23k256 SPI SRAM device
- improve handling of MTDs without eraseblocks (i.e., MTD_NO_ERASE)
- refactor and improve "sub-partition" handling with TRX partition
parser; partitions can now be created as sub-partitions of another
partition
SPINOR updates, from Cyrille Pitchen and Marek Vasut:
- introduce support to the SPI 1-2-2 and 1-4-4 protocols.
- introduce support to the Double Data Rate (DDR) mode.
- introduce support to the Octo SPI protocols.
- add support to new memory parts for Spansion, Macronix and Winbond.
- add fixes for the Aspeed, STM32 and Cadence QSPI controler drivers.
- clean up the st_spi_fsm driver.
NAND updates, from Boris Brezillon:
- addition of on-die ECC support to Micron driver
- addition of helpers to help drivers choose most appropriate ECC
settings
- deletion of dead-code (cached programming and ->errstat() hook)
- make sure drivers that do not support the SET/GET FEATURES command
return ENOTSUPP use a dummy ->set/get_features implementation
returning -ENOTSUPP (required for Micron on-die ECC)
- change the semantic of ecc->write_page() for drivers setting the
NAND_ECC_CUSTOM_PAGE_ACCESS flag
- support exiting 'GET STATUS' command in default ->cmdfunc()
implementations
- change the prototype of ->setup_data_interface()
A bunch of driver related changes:
- various cleanup, fixes and improvements of the MTK driver
- OMAP DT bindings fixes
- support for ->setup_data_interface() in the fsmc driver
- support for imx7 in the gpmi driver
- finalization of the denali driver rework (thanks to Masahiro for
the work he's done on this driver)
- fix "bitflips in erased pages" handling in the ifc driver
- addition of PM ops and dynamic timing configuration to the atmel
driver"
* tag 'for-linus-20170713' of git://git.infradead.org/linux-mtd: (118 commits)
Documentation: ABI: mtd: describe "offset" more precisely
mtd: Fix check in mtd_unpoint()
mtd: nand: mtk: release lock on error path
mtd: st_spi_fsm: remove SPINOR_OP_RDSR2 and use SPINOR_OP_RDCR instead
mtd: spi-nor: cqspi: remove duplicate const
mtd: spi-nor: Add support for Spansion S25FL064L
mtd: spi-nor: Add support for mx66u51235f
mtd: nand: mtk: add ->setup_data_interface() hook
mtd: nand: mtk: remove unneeded mtk_ecc_hw_init from mtk_ecc_resume
mtd: nand: mtk: remove unneeded mtk_nfc_hw_init from mtk_nfc_resume
mtd: nand: mtk: disable ecc irq when writing page with hwecc
mtd: nand: mtk: fix incorrect register setting order about ecc irq
mtd: partitions: fixup some allocate_partition() whitespace
mtd: parsers: trx: fix pr_err format for printing offset
MAINTAINERS: Update SPI NOR subsystem git repositories
mtd: extract TRX parser out of bcm47xxpart into a separated module
mtd: partitions: add support for partition parsers
mtd: partitions: add support for subpartitions
mtd: partitions: rename "master" to the "parent" where appropriate
mtd: partitions: remove sysfs files when deleting all master's partitions
...
Merge tag 'pwm/for-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This release cycle's changes include mostly updates and cleanups to
existing drivers along with a few cleanups to the core, documentation
and device tree bindings"
* tag 'pwm/for-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: cros-ec: Fix transposed param settings
pwm: meson: Improve PWM calculation precision
dt-bindings: pwm: meson: Add compatible for gxbb ao PWMs
pwm: meson: Add compatible for the gxbb ao PWMs
pwm: sun4i: Drop legacy callbacks
pwm: sun4i: Switch to atomic PWM
pwm: sun4i: Improve hardware read out
pwm: hibvt: Constify hibvt_pwm_ops
pwm: Silently error out on EPROBE_DEFER
pwm: Standardize document format
pwm: bfin: Remove unneeded error message
dt-bindings: pwm: Update STM32 timers clock names
dt-bindings: pwm: Add R-Car M3-W device tree bindings
pwm: tegra: Set maximum pwm clock source per SoC tapeout
Merge tag 'for-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fixes from Reichel:
"I have two more fixes for the power-supply subsystem:
- two fixes for twl4030-charger"
* tag 'for-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: twl4030-charger: add deferred probing for phy and iio
power: supply: twl4030-charger: move irq allocation to just before irqs are enabled
Merge tag 'drm-fixes-for-v4.13-rc1' of git://people.freedesktop.org/~airlied/linux
Pull more drm updates from Dave Airlie:
"i915, amd and some core fixes + mediatek color support.
Some fixes tree came in since the main pull request for rc1, primarily
i915 and drm-misc and one amd fix. The drm core vblank regression fix
is probably the most important thing.
I've also added the mediatek feature pull, it wasn't that big and
didn't look like it would have any impact outside of mediatek, in fact
it looks to just be a single feature, and some cleanups"
* tag 'drm-fixes-for-v4.13-rc1' of git://people.freedesktop.org/~airlied/linux: (31 commits)
drm/i915: Make DP-MST connector info work
drm/i915/gvt: Use fence error from GVT request for workload status
drm/i915/gvt: remove scheduler_mutex in per-engine workload_thread
drm/i915/gvt: Revert "drm/i915/gvt: Fix possible recursive locking issue"
drm/i915/gvt: Audit the command buffer address
drm/i915/gvt: Fix a memory leak in intel_gvt_init_gtt()
drm/rockchip: fix NULL check on devm_kzalloc() return value
drm/i915/fbdev: Check for existence of ifbdev->vma before operations
drm/radeon: Fix eDP for single-display iMac10,1 (v2)
drm/i915: Hold RPM wakelock while initializing OA buffer
drm/i915/cnl: Fix the CURSOR_COEFF_MASK used in DDI Vswing Programming
drm/i915/cfl: Fix Workarounds.
drm/i915: Avoid undefined behaviour of "u32 >> 32"
drm/i915: reintroduce VLV/CHV PFI programming power domain workaround
drm/i915: Fix an error checking test
drm/i915: Disable MSI for all pre-gen5
drm/atomic: Add missing drm_atomic_state_clear to atomic_remove_fb
drm: vblank: Fix vblank timestamp update
drm/i915/gvt: Make function dpy_reg_mmio_readx safe
drm/mediatek: separate color module to fixup error memory reallocation
...
Filipe Manana [Wed, 12 Jul 2017 22:36:02 +0000 (23:36 +0100)]
Btrfs: fix write corruption due to bio cloning on raid5/6
The recent changes to make bio cloning faster (added in the 4.13 merge
window) by using the bio_clone_fast() API introduced a regression on
raid5/6 modes, because cloned bios have an invalid bi_vcnt field
(therefore it can not be used) and the raid5/6 code uses the
bio_for_each_segment_all() API to iterate the segments of a bio, and this
API uses a bio's bi_vcnt field.
The issue is very simple to trigger by doing for example a direct IO write
against a raid5 or raid6 filesystem and then attempting to read what we
wrote before:
A scrub will also fail correcting bad copies, mentioning the following in
dmesg/syslog:
[18276.128696] scrub_handle_errored_block: 498 callbacks suppressed
[18276.129617] BTRFS warning (device sdf): checksum error at logical 2186346496 on dev /dev/sde, sector 2116608, root 5, inode 257, offset 65536, length 4096, links $
[18276.149235] btrfs_dev_stat_print_on_error: 498 callbacks suppressed
[18276.157897] BTRFS error (device sdf): bdev /dev/sde errs: wr 0, rd 0, flush 0, corrupt 1, gen 0
[18276.206059] BTRFS warning (device sdf): checksum error at logical 2186477568 on dev /dev/sdd, sector 2116736, root 5, inode 257, offset 196608, length 4096, links$
[18276.206059] BTRFS error (device sdf): bdev /dev/sdd errs: wr 0, rd 0, flush 0, corrupt 1, gen 0
[18276.306552] BTRFS warning (device sdf): checksum error at logical 2186543104 on dev /dev/sdd, sector 2116864, root 5, inode 257, offset 262144, length 4096, links$
[18276.319152] BTRFS error (device sdf): bdev /dev/sdd errs: wr 0, rd 0, flush 0, corrupt 2, gen 0
[18276.394316] BTRFS warning (device sdf): checksum error at logical 2186739712 on dev /dev/sdf, sector 2116992, root 5, inode 257, offset 458752, length 4096, links$
[18276.396348] BTRFS error (device sdf): bdev /dev/sdf errs: wr 0, rd 0, flush 0, corrupt 1, gen 0
[18276.434127] BTRFS warning (device sdf): checksum error at logical 2186870784 on dev /dev/sde, sector 2117120, root 5, inode 257, offset 589824, length 4096, links$
[18276.434127] BTRFS error (device sdf): bdev /dev/sde errs: wr 0, rd 0, flush 0, corrupt 2, gen 0
[18276.500504] BTRFS error (device sdf): unable to fixup (regular) error at logical 2186477568 on dev /dev/sdd
[18276.538400] BTRFS warning (device sdf): checksum error at logical 2186481664 on dev /dev/sdd, sector 2116744, root 5, inode 257, offset 200704, length 4096, links$
[18276.540452] BTRFS error (device sdf): bdev /dev/sdd errs: wr 0, rd 0, flush 0, corrupt 3, gen 0
[18276.542012] BTRFS error (device sdf): unable to fixup (regular) error at logical 2186481664 on dev /dev/sdd
[18276.585030] BTRFS error (device sdf): unable to fixup (regular) error at logical 2186346496 on dev /dev/sde
[18276.598306] BTRFS warning (device sdf): checksum error at logical 2186412032 on dev /dev/sde, sector 2116736, root 5, inode 257, offset 131072, length 4096, links$
[18276.598310] BTRFS error (device sdf): bdev /dev/sde errs: wr 0, rd 0, flush 0, corrupt 3, gen 0
[18276.598582] BTRFS error (device sdf): unable to fixup (regular) error at logical 2186350592 on dev /dev/sde
[18276.603455] BTRFS error (device sdf): bdev /dev/sde errs: wr 0, rd 0, flush 0, corrupt 4, gen 0
[18276.638362] BTRFS warning (device sdf): checksum error at logical 2186354688 on dev /dev/sde, sector 2116624, root 5, inode 257, offset 73728, length 4096, links $
[18276.640445] BTRFS error (device sdf): bdev /dev/sde errs: wr 0, rd 0, flush 0, corrupt 5, gen 0
[18276.645942] BTRFS error (device sdf): unable to fixup (regular) error at logical 2186354688 on dev /dev/sde
[18276.657204] BTRFS error (device sdf): unable to fixup (regular) error at logical 2186412032 on dev /dev/sde
[18276.660563] BTRFS warning (device sdf): checksum error at logical 2186416128 on dev /dev/sde, sector 2116744, root 5, inode 257, offset 135168, length 4096, links$
[18276.664609] BTRFS error (device sdf): bdev /dev/sde errs: wr 0, rd 0, flush 0, corrupt 6, gen 0
[18276.664609] BTRFS error (device sdf): unable to fixup (regular) error at logical 2186358784 on dev /dev/sde
So fix this by using the bio_for_each_segment() API and setting before
the bio's bi_iter field to the value of the corresponding btrfs bio
container's saved iterator if we are processing a cloned bio in the
raid5/6 code (the same code processes both cloned and non-cloned bios).
This incorrect iteration of cloned bios was also causing some occasional
BUG_ONs when running fstest btrfs/064, which have a trace like the
following:
Colin Ian King [Thu, 13 Jul 2017 17:51:15 +0000 (18:51 +0100)]
svcrdma: fix an incorrect check on -E2BIG and -EINVAL
The current check will always be true and will always jump to
err1, this looks dubious to me. I believe && should be used
instead of ||.
Detected by CoverityScan, CID#1450120 ("Logically Dead Code")
Fixes: 107c1d0a991a ("svcrdma: Avoid Send Queue overflow") Signed-off-by: Colin Ian King <[email protected]> Reviewed-by: Chuck Lever <[email protected]> Signed-off-by: J. Bruce Fields <[email protected]>
Rafał Miłecki [Sun, 25 Jun 2017 11:11:54 +0000 (13:11 +0200)]
Documentation: ABI: mtd: describe "offset" more precisely
So far Linux supported only two levels of MTD devices so we didn't need
a very precise description for this sysfs file. With commit 97519dc52b44a ("mtd: partitions: add support for subpartitions") there
is support for a tree structure so we should have more precise
description. Using "parent" and "flash device" makes it more accurate.
Roman Kagan [Thu, 22 Jun 2017 13:51:01 +0000 (16:51 +0300)]
kvm: x86: hyperv: add KVM_CAP_HYPERV_SYNIC2
There is a flaw in the Hyper-V SynIC implementation in KVM: when message
page or event flags page is enabled by setting the corresponding msr,
KVM zeroes it out. This is problematic because on migration the
corresponding MSRs are loaded on the destination, so the content of
those pages is lost.
This went unnoticed so far because the only user of those pages was
in-KVM hyperv synic timers, which could continue working despite that
zeroing.
Newer QEMU uses those pages for Hyper-V VMBus implementation, and
zeroing them breaks the migration.
Besides, in newer QEMU the content of those pages is fully managed by
QEMU, so zeroing them is undesirable even when writing the MSRs from the
guest side.
To support this new scheme, introduce a new capability,
KVM_CAP_HYPERV_SYNIC2, which, when enabled, makes sure that the synic
pages aren't zeroed out in KVM.
Ladi Prosek [Mon, 26 Jun 2017 07:56:43 +0000 (09:56 +0200)]
KVM: x86: make backwards_tsc_observed a per-VM variable
The backwards_tsc_observed global introduced in commit 16a9602 is never
reset to false. If a VM happens to be running while the host is suspended
(a common source of the TSC jumping backwards), master clock will never
be enabled again for any VM. In contrast, if no VM is running while the
host is suspended, master clock is unaffected. This is inconsistent and
unnecessarily strict. Let's track the backwards_tsc_observed variable
separately and let each VM start with a clean slate.
Real world impact: My Windows VMs get slower after my laptop undergoes a
suspend/resume cycle. The only way to get the perf back is unloading and
reloading the kvm module.
ext2: Fix memory leak when truncate races ext2_get_blocks
Buffer heads referencing indirect blocks may not be released if the file
is truncated at the right time. This happens because ext2_get_branch()
returns NULL when it finds the whole chain of indirect blocks already
set, and when truncate alters the chain this value of NULL is
treated as the address of the last head to be released. Handle this in the
same way as it's done after the got_it label.
Chris Brandt [Wed, 12 Jul 2017 15:40:01 +0000 (08:40 -0700)]
mmc: tmio-mmc: fix bad pointer math
The existing code gives an incorrect pointer value.
The buffer pointer 'buf' was of type unsigned short *, and 'count' was a
number in bytes. A cast of buf should have been used.
However, instead of casting, just change the code to use u32 pointers.
Grzegorz Sluja [Thu, 13 Jul 2017 09:17:58 +0000 (11:17 +0200)]
mmc: block: Prevent new req entering queue after its cleanup
The commit 304419d8a7e9 ("mmc: core: Allocate per-request data using the
block layer core"), refactored the mechanism of queue handling, but also
made mmc_init_request() to be called after mmc_cleanup_queue(). This
triggers a null pointer dereference:
I made the mistake of upgrading my desktop to the new Fedora 26 that
comes with gcc-7.1.1.
There's nothing wrong per se that I've noticed, but I now have 1500
lines of warnings, mostly from the new format-truncation warning
triggering all over the tree.
We use 'snprintf()' and friends in a lot of places, and often know that
the numbers are fairly small (ie a controller index or similar), but gcc
doesn't know that, and sees an 'int', and thinks that it could be some
huge number. And then complains when our buffers are not able to fit
the name for the ten millionth controller.
These warnings aren't necessarily bad per se, and we probably want to
look through them subsystem by subsystem, but at least during the merge
window they just mean that I can't even see if somebody is introducing
any *real* problems when I pull.
Dave Airlie [Thu, 13 Jul 2017 01:22:34 +0000 (11:22 +1000)]
Merge tag 'drm-misc-next-fixes-2017-07-10' of git://anongit.freedesktop.org/git/drm-misc into drm-next
Core Changes:
- Fix empty timestamps on hw without vlbank counter (Laurent)
- Clear atomic state before retrying ww/mutex acquisition in remove_fb (Maarten)
Dave Airlie [Thu, 13 Jul 2017 01:21:16 +0000 (11:21 +1000)]
Merge tag 'drm-intel-next-fixes-2017-07-11' of git://anongit.freedesktop.org/git/drm-intel into drm-next
drm/i915 fixes for v4.13-rc1
* tag 'drm-intel-next-fixes-2017-07-11' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Make DP-MST connector info work
drm/i915/gvt: Use fence error from GVT request for workload status
drm/i915/gvt: remove scheduler_mutex in per-engine workload_thread
drm/i915/gvt: Revert "drm/i915/gvt: Fix possible recursive locking issue"
drm/i915/gvt: Audit the command buffer address
drm/i915/gvt: Fix a memory leak in intel_gvt_init_gtt()
drm/i915/fbdev: Check for existence of ifbdev->vma before operations
drm/i915: Hold RPM wakelock while initializing OA buffer
drm/i915/cnl: Fix the CURSOR_COEFF_MASK used in DDI Vswing Programming
drm/i915/cfl: Fix Workarounds.
drm/i915: Avoid undefined behaviour of "u32 >> 32"
drm/i915: reintroduce VLV/CHV PFI programming power domain workaround
drm/i915: Fix an error checking test
drm/i915: Disable MSI for all pre-gen5
drm/i915/gvt: Make function dpy_reg_mmio_readx safe
drm/i915/gvt: Don't read ADPA_CRT_HOTPLUG_MONITOR from host
drm/i915/gvt: Set initial PORT_CLK_SEL vreg for BDW
drm/i915/gvt: Fix inconsistent locks holding sequence
drm/i915/gvt: Fix possible recursive locking issue
Dave Airlie [Thu, 13 Jul 2017 01:00:20 +0000 (11:00 +1000)]
Merge branch 'mediatek-drm-next-4.13' of https://github.com/ckhu-mediatek/linux.git-tags into drm-next
This include new color format support and some fixups.
* 'mediatek-drm-next-4.13' of https://github.com/ckhu-mediatek/linux.git-tags:
drm/mediatek: separate color module to fixup error memory reallocation
drm/mediatek: check for memory allocation failure
drm/mediatek: re-phrase DRM_INFO error message
drm/mediatek: use platform_register_drivers
drm/mediatek: Support UYVY and YUYV format for overlay
Merge tag 'modules-for-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull modules updates from Jessica Yu:
"Summary of modules changes for the 4.13 merge window:
- Minor code cleanups
- Avoid accessing mod struct prior to checking module struct version,
from Kees
- Fix racy atomic inc/dec logic of kmod_concurrent_max in kmod, from
Luis"
* tag 'modules-for-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: make the modinfo name const
kmod: reduce atomic operations on kmod_concurrent and simplify
module: use list_for_each_entry_rcu() on find_module_all()
kernel/module.c: suppress warning about unused nowarn variable
module: Add module name to modinfo
module: Pass struct load_info into symbol checks
PCI / PM: Fix native PME handling during system suspend/resume
Commit 76cde7e49590 (PCI / PM: Make PCIe PME interrupts wake up from
suspend-to-idle) went too far with preventing pcie_pme_work_fn() from
clearing the root port's PME Status and re-enabling the PME interrupt
which should be done for PMEs to work correctly after system resume.
The failing scenario is as follows:
1. pcie_pme_suspend() finds that the PME IRQ should be designated
for system wakeup, so it calls enable_irq_wake() and then sets
data->suspend_level to PME_SUSPEND_WAKEUP.
2. PME interrupt happens at this point.
3. pcie_pme_irq() runs, disables the PME interrupt and queues up
the execution of pcie_pme_work_fn().
4. pcie_pme_work_fn() runs before pcie_pme_resume() and breaks out
of the loop right away, because data->suspend_level is not
PME_SUSPEND_NONE, and it doesn't re-enable the PME interrupt
for the same reason.
5. pcie_pme_resume() runs and simply calls disable_irq_wake()
without re-enabling the PME interrupt (because data->suspend_level
is not PME_SUSPEND_NONE), so the PME interrupt remains disabled
and the PME Status remains set.
To fix this notice that there is no reason why pcie_pme_work_fn()
should behave in a special way during system resume if the PME
interrupt is not disabled by pcie_pme_suspend() and partially revert
commit 76cde7e49590 and restore the previous (and correct) behavior
of pcie_pme_work_fn().
Fixes: 76cde7e49590 (PCI / PM: Make PCIe PME interrupts wake up from suspend-to-idle) Reported-and-tested-by: Naresh Solanki <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]> Acked-by: Bjorn Helgaas <[email protected]>
Nikolay Borisov [Wed, 12 Jul 2017 21:37:51 +0000 (14:37 -0700)]
writeback: rework wb_[dec|inc]_stat family of functions
Currently the writeback statistics code uses a percpu counters to hold
various statistics. Furthermore we have 2 families of functions - those
which disable local irq and those which doesn't and whose names begin
with double underscore. However, they both end up calling
__add_wb_stats which in turn calls percpu_counter_add_batch which is
already irq-safe.
Exploiting this fact allows to eliminated the __wb_* functions since
they don't add any further protection than we already have.
Furthermore, refactor the wb_* function to call __add_wb_stat directly
without the irq-disabling dance. This will likely result in better
runtime of code which deals with modifying the stat counters.
While at it also document why percpu_counter_add_batch is in fact
preempt and irq-safe since at least 3 people got confused.
Joe Perches [Wed, 12 Jul 2017 21:37:43 +0000 (14:37 -0700)]
video: fbdev: intelfb: move inline before return type
Make the code like the rest of the kernel.
But there is an oddity here because the inline should probably be removed.
It's an extern function in intelfb.h and it is used in intelfbdrv.c and
intelfbhw.c.
The inline is kept here as I suppose it's possible for some compiler to
make the uses inline in intelfbdrv and and also create an external
function for intelfbhw.
projects / linux.git / log