block: fix surprise removal for drivers calling blk_set_queue_dying
Various block drivers call blk_set_queue_dying to mark a disk as dead due
to surprise removal events, but since commit 8e141f9eb803 that doesn't
work given that the GD_DEAD flag needs to be set to stop I/O.
Replace the driver calls to blk_set_queue_dying with a new (and properly
documented) blk_mark_disk_dead API, and fold blk_set_queue_dying into the
only remaining caller.
perf bpf: Defer freeing string after possible strlen() on it
This was detected by the gcc in Fedora Rawhide's gcc:
50 11.01 fedora:rawhide : FAIL gcc version 12.0.1 20220205 (Red Hat 12.0.1-0) (GCC)
inlined from 'bpf__config_obj' at util/bpf-loader.c:1242:9:
util/bpf-loader.c:1225:34: error: pointer 'map_opt' may be used after 'free' [-Werror=use-after-free]
1225 | *key_scan_pos += strlen(map_opt);
| ^~~~~~~~~~~~~~~
util/bpf-loader.c:1223:9: note: call to 'free' here
1223 | free(map_name);
| ^~~~~~~~~~~~~~
cc1: all warnings being treated as errors
So do the calculations on the pointer before freeing it.
Takashi Iwai [Tue, 15 Feb 2022 13:27:56 +0000 (14:27 +0100)]
ASoC: intel: skylake: Set max DMA segment size
The recent code refactoring to use the standard DMA helper requires
the max DMA segment size setup for SG list management. Without it,
the kernel may spew warnings when a large buffer is allocated.
This patch sets up dma_set_max_seg_size() for avoiding spurious
warnings.
Takashi Iwai [Tue, 15 Feb 2022 13:27:55 +0000 (14:27 +0100)]
ASoC: SOF: hda: Set max DMA segment size
The recent code refactoring to use the standard DMA helper requires
the max DMA segment size setup for SG list management. Without it,
the kernel may spew warnings when a large buffer is allocated.
This patch sets up dma_set_max_seg_size() for avoiding spurious
warnings.
Takashi Iwai [Tue, 15 Feb 2022 13:27:54 +0000 (14:27 +0100)]
ALSA: hda: Set max DMA segment size
The recent code refactoring to use the standard DMA helper requires
the max DMA segment size setup for SG list management. Without it,
the kernel may spew warnings when a large buffer is allocated.
This patch sets up dma_set_max_seg_size() for avoiding spurious
warnings.
Jon Maloy [Wed, 16 Feb 2022 02:00:09 +0000 (21:00 -0500)]
tipc: fix wrong notification node addresses
The previous bug fix had an unfortunate side effect that broke
distribution of binding table entries between nodes. The updated
tipc_sock_addr struct is also used further down in the same
function, and there the old value is still the correct one.
Willem de Bruijn [Tue, 15 Feb 2022 16:00:37 +0000 (11:00 -0500)]
ipv6: per-netns exclusive flowlabel checks
Ipv6 flowlabels historically require a reservation before use.
Optionally in exclusive mode (e.g., user-private).
Commit 59c820b2317f ("ipv6: elide flowlabel check if no exclusive
leases exist") introduced a fastpath that avoids this check when no
exclusive leases exist in the system, and thus any flowlabel use
will be granted.
That allows skipping the control operation to reserve a flowlabel
entirely. Though with a warning if the fast path fails:
This is an optimization. Robust applications still have to revert to
requesting leases if the fast path fails due to an exclusive lease.
Still, this is subtle. Better isolate network namespaces from each
other. Flowlabels are per-netns. Also record per-netns whether
exclusive leases are in use. Then behavior does not change based on
activity in other netns.
Changes
v2
- wrap in IS_ENABLED(CONFIG_IPV6) to avoid breakage if disabled
Whenever bridge driver hits the max capacity of MDBs, it disables
the MC processing (by setting corresponding bridge option), but never
notifies switchdev about such change (the notifiers are called only upon
explicit setting of this option, through the registered netlink interface).
This could lead to situation when Software MDB processing gets disabled,
but this event never gets offloaded to the underlying Hardware.
Steve French [Wed, 16 Feb 2022 19:23:53 +0000 (13:23 -0600)]
cifs: fix confusing unneeded warning message on smb2.1 and earlier
When mounting with SMB2.1 or earlier, even with nomultichannel, we
log the confusing warning message:
"CIFS: VFS: multichannel is not supported on this protocol version, use 3.0 or above"
Fix this so that we don't log this unless they really are trying
to mount with multichannel.
Trond Myklebust [Tue, 15 Feb 2022 23:05:18 +0000 (18:05 -0500)]
NFS: Do not report writeback errors in nfs_getattr()
The result of the writeback, whether it is an ENOSPC or an EIO, or
anything else, does not inhibit the NFS client from reporting the
correct file timestamps.
Fixes: 79566ef018f5 ("NFS: Getattr doesn't require data sync semantics") Signed-off-by: Trond Myklebust <[email protected]> Signed-off-by: Anna Schumaker <[email protected]>
Linus Torvalds [Tue, 15 Feb 2022 23:28:00 +0000 (15:28 -0800)]
tty: n_tty: do not look ahead for EOL character past the end of the buffer
Daniel Gibson reports that the n_tty code gets line termination wrong in
very specific cases:
"If you feed a line with exactly 64 chars + terminating newline, and
directly afterwards (without reading) another line into a pseudo
terminal, the the first read() on the other side will return the 64
char line *without* terminating newline, and the next read() will
return the missing terminating newline AND the complete next line (if
it fits in the buffer)"
and bisected the behavior to commit 3b830a9c34d5 ("tty: convert
tty_ldisc_ops 'read()' function to take a kernel pointer").
Now, digging deeper, it turns out that the behavior isn't exactly new:
what changed in commit 3b830a9c34d5 was that the tty line discipline
.read() function is now passed an intermediate kernel buffer rather than
the final user space buffer.
And that intermediate kernel buffer is 64 bytes in size - thus that
special case with exactly 64 bytes plus terminating newline.
The same problem did exist before, but historically the boundary was not
the 64-byte chunk, but the user-supplied buffer size, which is obviously
generally bigger (and potentially bigger than N_TTY_BUF_SIZE, which
would hide the issue entirely).
The reason is that the n_tty canon_copy_from_read_buf() code would look
ahead for the EOL character one byte further than it would actually
copy. It would then decide that it had found the terminator, and unmark
it as an EOL character - which in turn explains why the next read
wouldn't then be terminated by it.
Now, the reason it did all this in the first place is related to some
historical and pretty obscure EOF behavior, see commit ac8f3bf8832a
("n_tty: Fix poll() after buffer-limited eof push read") and commit 40d5e0905a03 ("n_tty: Fix EOF push handling").
And the reason for the EOL confusion is that we treat EOF as a special
EOL condition, with the EOL character being NUL (aka "__DISABLED_CHAR"
in the kernel sources).
So that EOF look-ahead also affects the normal EOL handling.
This patch just removes the look-ahead that causes problems, because EOL
is much more critical than the historical "EOF in the middle of a line
that coincides with the end of the buffer" handling ever was.
Now, it is possible that we should indeed re-introduce the "look at next
character to see if it's a EOF" behavior, but if so, that should be done
not at the kernel buffer chunk boundary in canon_copy_from_read_buf(),
but at a higher level, when we run out of the user buffer.
In particular, the place to do that would be at the top of
'n_tty_read()', where we check if it's a continuation of a previously
started read, and there is no more buffer space left, we could decide to
just eat the __DISABLED_CHAR at that point.
But that would be a separate patch, because I suspect nobody actually
cares, and I'd like to get a report about it before bothering.
ACPI: processor idle: Allow playing dead in C3 state
The above patch is trying to enter C3 state during init, what is causing
a T40 system freeze. I have not found a similar issue on any other of my
32-bit machines.
The fix is to add another exception to the processor_power_dmi_table[] list.
As a result the dmesg shows as expected:
[2.155398] ACPI: IBM ThinkPad T40 detected - limiting to C2 max_cstate. Override with "processor.max_cstate=9"
[2.155404] ACPI: processor limited to max C-state 2
The fix is trivial and affects only vintage T40 systems.
Fixes: d6b88ce2eb9d ("CPI: processor idle: Allow playing dead in C3 state") Signed-off-by: Woody Suwalski <[email protected]> Reviewed-by: Hans de Goede <[email protected]> Cc: 5.16+ <[email protected]> # 5.16+
[ rjw: New subject ] Signed-off-by: Rafael J. Wysocki <[email protected]>
The struct perf_event_attr is initialised differently in Arm64 when
recording in call-graph fp mode, so update the relevant tests, and add
two extra arm64-only tests.
Before:
$ perf test 17 -v
17: Setup struct perf_event_attr
[...]
running './tests/attr/test-record-graph-default'
expected sample_type=295, got 4391
expected sample_regs_user=0, got 1073741824
FAILED './tests/attr/test-record-graph-default' - match failure
test child finished with -1
---- end ----
After:
[...]
running './tests/attr/test-record-graph-default-aarch64'
test limitation 'aarch64'
running './tests/attr/test-record-graph-fp-aarch64'
test limitation 'aarch64'
running './tests/attr/test-record-graph-default'
test limitation '!aarch64'
excluded architecture list ['aarch64']
skipped [aarch64] './tests/attr/test-record-graph-default'
running './tests/attr/test-record-graph-fp'
test limitation '!aarch64'
excluded architecture list ['aarch64']
skipped [aarch64] './tests/attr/test-record-graph-fp'
[...]
Kees Cook [Sun, 13 Feb 2022 18:24:43 +0000 (10:24 -0800)]
libsubcmd: Fix use-after-free for realloc(..., 0)
GCC 12 correctly reports a potential use-after-free condition in the
xrealloc helper. Fix the warning by avoiding an implicit "free(ptr)"
when size == 0:
In file included from help.c:12:
In function 'xrealloc',
inlined from 'add_cmdname' at help.c:24:2: subcmd-util.h:56:23: error: pointer may be used after 'realloc' [-Werror=use-after-free]
56 | ret = realloc(ptr, size);
| ^~~~~~~~~~~~~~~~~~
subcmd-util.h:52:21: note: call to 'realloc' here
52 | void *ret = realloc(ptr, size);
| ^~~~~~~~~~~~~~~~~~
subcmd-util.h:58:31: error: pointer may be used after 'realloc' [-Werror=use-after-free]
58 | ret = realloc(ptr, 1);
| ^~~~~~~~~~~~~~~
subcmd-util.h:52:21: note: call to 'realloc' here
52 | void *ret = realloc(ptr, size);
| ^~~~~~~~~~~~~~~~~~
James Clark [Thu, 10 Feb 2022 20:06:20 +0000 (20:06 +0000)]
perf cs-etm: Fix corrupt inject files when only last branch option is enabled
'perf inject' with Coresight data generates files that cannot be opened
when only the last branch option is specified:
perf inject -i perf.data --itrace=l -o inject.data
perf script -i inject.data
0x33faa8 [0x8]: failed to process type: 9 [Bad address]
This is because cs_etm__synth_instruction_sample() is called even when
the sample type for instructions hasn't been setup. Last branch records
are attached to instruction samples so it doesn't make sense to generate
them when --itrace=i isn't specified anyway.
This change disables all calls of cs_etm__synth_instruction_sample()
unless --itrace=i is specified, resulting in a file with no samples if
only --itrace=l is provided, rather than a bad file.
James Clark [Thu, 10 Feb 2022 20:06:19 +0000 (20:06 +0000)]
perf cs-etm: No-op refactor of synth opt usage
sample_branches and sample_instructions are already saved in the
synth_opts struct. Other usages like synth_opts.last_branch don't save a
value, so make this more consistent by always going through synth_opts
and not saving duplicate values.
Rob Herring [Tue, 1 Feb 2022 21:39:03 +0000 (15:39 -0600)]
libperf: Fix 32-bit build for tests uint64_t printf
Commit a7f3713f6bf207e6 ("libperf tests: Add test_stat_multiplexing test")
added printf's of 64-bit ints using %lu which doesn't work on 32-bit
builds:
tests/test-evlist.c:529:29: error: format ‘%lu’ expects argument of type \
‘long unsigned int’, but argument 4 has type ‘uint64_t’ {aka ‘long long unsigned int’} [-Werror=format=]
Use PRIu64 instead which works on both 32-bit and 64-bit systems.
tools headers UAPI: Sync linux/perf_event.h with the kernel sources
To pick the trivial change in:
ddecd22878601a60 ("perf: uapi: Document perf_event_attr::sig_data truncation on 32 bit architectures")
Just adds a comment.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/perf_event.h' differs from latest version at 'include/uapi/linux/perf_event.h'
diff -u tools/include/uapi/linux/perf_event.h include/uapi/linux/perf_event.h
Ville Syrjälä [Wed, 9 Feb 2022 09:19:27 +0000 (11:19 +0200)]
drm/atomic: Don't pollute crtc_state->mode_blob with error pointers
Make sure we don't assign an error pointer to crtc_state->mode_blob
as that will break all kinds of places that assume either NULL or a
valid pointer (eg. drm_property_blob_put()).
Linus Torvalds [Tue, 15 Feb 2022 19:07:59 +0000 (11:07 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Read HW interrupt pending state from the HW
x86:
- Don't truncate the performance event mask on AMD
- Fix Xen runstate updates to be atomic when preempting vCPU
- Fix for AMD AVIC interrupt injection race
- Several other AMD fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/pmu: Use AMD64_RAW_EVENT_MASK for PERF_TYPE_RAW
KVM: x86/pmu: Don't truncate the PerfEvtSeln MSR when creating a perf event
KVM: SVM: fix race between interrupt delivery and AVIC inhibition
KVM: SVM: set IRR in svm_deliver_interrupt
KVM: SVM: extract avic_ring_doorbell
selftests: kvm: Remove absent target file
KVM: arm64: vgic: Read HW interrupt pending state from the HW
KVM: x86/xen: Fix runstate updates to be atomic when preempting vCPU
KVM: x86: SVM: move avic definitions from AMD's spec to svm.h
KVM: x86: lapic: don't touch irr_pending in kvm_apic_update_apicv when inhibiting it
KVM: x86: nSVM: deal with L1 hypervisor that intercepts interrupts but lets L2 control them
KVM: x86: nSVM: expose clean bit support to the guest
KVM: x86: nSVM/nVMX: set nested_run_pending on VM entry which is a result of RSM
KVM: x86: nSVM: mark vmcb01 as dirty when restoring SMM saved state
KVM: x86: nSVM: fix potential NULL derefernce on nested migration
KVM: x86: SVM: don't passthrough SMAP/SMEP/PKE bits in !NPT && !gCR0.PG case
Revert "svm: Add warning message for AVIC IPI invalid target"
Dan Williams [Tue, 15 Feb 2022 18:54:23 +0000 (10:54 -0800)]
ACPI: tables: Quiet ACPI table not found warning
Paul reports that the ACPI core complains on every boot about a missing
CEDT table. Unlike the standard NUMA tables (SRAT, MADT, and SLIT) that
are critical to NUMA init, CEDT is only expected on CXL platforms. Given
the notice is not actionable lower its severity to debug.
Linus Torvalds [Tue, 15 Feb 2022 18:52:05 +0000 (10:52 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- memory leak fix for hid-elo driver (Dongliang Mu)
- fix for hangs on newer AMD platforms with amd_sfh-driven hardware
(Basavaraj Natikar )
- locking fix in i2c-hid (Daniel Thompson)
- a few device-ID specific quirks
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: amd_sfh: Add interrupt handler to process interrupts
HID: amd_sfh: Add functionality to clear interrupts
HID: amd_sfh: Disable the interrupt for all command
HID: amd_sfh: Correct the structure field name
HID: amd_sfh: Handle amd_sfh work buffer in PM ops
HID:Add support for UGTABLET WP5540
HID: amd_sfh: Add illuminance mask to limit ALS max value
HID: amd_sfh: Increase sensor command timeout
HID: i2c-hid: goodix: Fix a lockdep splat
HID: elo: fix memory leak in elo_probe
HID: apple: Set the tilde quirk flag on the Wellspring 5 and later
Linus Torvalds [Tue, 15 Feb 2022 17:14:05 +0000 (09:14 -0800)]
Merge tag 'for-5.17-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- yield CPU more often when defragmenting a large file
- skip defragmenting extents already under writeback
- improve error message when send fails to write file data
- get rid of warning when mounted with 'flushoncommit'
* tag 'for-5.17-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: send: in case of IO error log it
btrfs: get rid of warning on transaction commit when using flushoncommit
btrfs: defrag: don't try to defrag extents which are under writeback
btrfs: don't hold CPU for too long when defragging a file
Linus Torvalds [Tue, 15 Feb 2022 17:10:09 +0000 (09:10 -0800)]
Merge tag 'for-5.17/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
- Fix miscompilations when function calls are made from inside a
put_user() call
- Drop __init from map_pages() declaration to avoid random boot crashes
- Added #error messages if a 64-bit compiler was used to build a 32-bit
kernel (and vice versa)
- Fix out-of-bound data TLB miss faults in sba_iommu and ccio-dma
drivers
- Add ioread64_lo_hi() and iowrite64_lo_hi() functions to avoid kernel
test robot errors
- Fix link failure when 8250_gsc driver is built without CONFIG_IOSAPIC
* tag 'for-5.17/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
serial: parisc: GSC: fix build when IOSAPIC is not set
parisc: Fix some apparent put_user() failures
parisc: Show error if wrong 32/64-bit compiler is being used
parisc: Add ioread64_lo_hi() and iowrite64_lo_hi()
parisc: Fix sglist access in ccio-dma.c
parisc: Fix data TLB miss in sba_unmap_sg
parisc: Drop __init from map_pages declaration
Linus Torvalds [Tue, 15 Feb 2022 17:05:01 +0000 (09:05 -0800)]
Merge tag 'hyperv-fixes-signed-20220215' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Rework use of DMA_BIT_MASK in vmbus to work around a clang bug
(Michael Kelley)
- Fix NUMA topology (Long Li)
- Fix a memory leak in vmbus (Miaoqian Lin)
- One minor clean-up patch (Cai Huoqing)
* tag 'hyperv-fixes-signed-20220215' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: utils: Make use of the helper macro LIST_HEAD()
Drivers: hv: vmbus: Rework use of DMA_BIT_MASK(64)
Drivers: hv: vmbus: Fix memory leak in vmbus_add_channel_kobj
PCI: hv: Fix NUMA node assignment when kernel boots with custom NUMA topology
Oliver Neukum [Tue, 15 Feb 2022 10:35:47 +0000 (11:35 +0100)]
CDC-NCM: avoid overflow in sanity checking
A broken device may give an extreme offset like 0xFFF0
and a reasonable length for a fragment. In the sanity
check as formulated now, this will create an integer
overflow, defeating the sanity check. Both offset
and offset + len need to be checked in such a manner
that no overflow can occur.
And those quantities should be unsigned.
Eliav Farber [Thu, 13 Jan 2022 10:06:19 +0000 (10:06 +0000)]
EDAC: Fix calculation of returned address and next offset in edac_align_ptr()
Do alignment logic properly and use the "ptr" local variable for
calculating the remainder of the alignment.
This became an issue because struct edac_mc_layer has a size that is not
zero modulo eight, and the next offset that was prepared for the private
data was unaligned, causing an alignment exception.
The patch in Fixes: which broke this actually wanted to "what we
actually care about is the alignment of the actual pointer that's about
to be returned." But it didn't check that alignment.
Tom Rix [Tue, 15 Feb 2022 02:05:41 +0000 (18:05 -0800)]
mctp: fix use after free
Clang static analysis reports this problem
route.c:425:4: warning: Use of memory after it is freed
trace_mctp_key_acquire(key);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
When mctp_key_add() fails, key is freed but then is later
used in trace_mctp_key_acquire(). Add an else statement
to use the key only when mctp_key_add() is successful.
Fixes: 4f9e1ba6de45 ("mctp: Add tracepoints for tag/key handling") Signed-off-by: Tom Rix <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Vladimir Oltean [Mon, 14 Feb 2022 23:42:00 +0000 (01:42 +0200)]
net: mscc: ocelot: fix use-after-free in ocelot_vlan_del()
ocelot_vlan_member_del() will free the struct ocelot_bridge_vlan, so if
this is the same as the port's pvid_vlan which we access afterwards,
what we're accessing is freed memory.
Fix the bug by determining whether to clear ocelot_port->pvid_vlan prior
to calling ocelot_vlan_member_del().
Fixes: d4004422f6f9 ("net: mscc: ocelot: track the port pvid using a pointer") Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Eric Dumazet [Mon, 14 Feb 2022 19:15:53 +0000 (11:15 -0800)]
bonding: fix data-races around agg_select_timer
syzbot reported that two threads might write over agg_select_timer
at the same time. Make agg_select_timer atomic to fix the races.
BUG: KCSAN: data-race in bond_3ad_initiate_agg_selection / bond_3ad_state_machine_handler
read to 0xffff8881242aea90 of 4 bytes by task 1846 on cpu 1:
bond_3ad_state_machine_handler+0x99/0x2810 drivers/net/bonding/bond_3ad.c:2317
process_one_work+0x3f6/0x960 kernel/workqueue.c:2307
worker_thread+0x616/0xa70 kernel/workqueue.c:2454
kthread+0x1bf/0x1e0 kernel/kthread.c:377
ret_from_fork+0x1f/0x30
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 25910 Comm: syz-executor.1 Tainted: G W 5.17.0-rc4-syzkaller-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Radu Bulie [Mon, 14 Feb 2022 17:45:34 +0000 (19:45 +0200)]
dpaa2-eth: Initialize mutex used in one step timestamping path
1588 Single Step Timestamping code path uses a mutex to
enforce atomicity for two events:
- update of ptp single step register
- transmit ptp event packet
Before this patch the mutex was not initialized. This
caused unexpected crashes in the Tx function.
Fixes: c55211892f463 ("dpaa2-eth: support PTP Sync packet one-step timestamping") Signed-off-by: Radu Bulie <[email protected]> Reviewed-by: Ioana Ciornei <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Tom Rix [Mon, 14 Feb 2022 15:41:39 +0000 (07:41 -0800)]
dpaa2-switch: fix default return of dpaa2_switch_flower_parse_mirror_key
Clang static analysis reports this representative problem
dpaa2-switch-flower.c:616:24: warning: The right operand of '=='
is a garbage value
tmp->cfg.vlan_id == vlan) {
^ ~~~~
vlan is set in dpaa2_switch_flower_parse_mirror_key(). However
this function can return success without setting vlan. So
change the default return to -EOPNOTSUPP.
Zhang Yunkai [Mon, 14 Feb 2022 03:27:21 +0000 (03:27 +0000)]
ipv4: add description about martian source
When multiple containers are running in the environment and multiple
macvlan network port are configured in each container, a lot of martian
source prints will appear after martian_log is enabled. they are almost
the same, and printed by net_warn_ratelimited. Each arp message will
trigger this print on each network port.
Such as:
IPv4: martian source 173.254.95.16 from 173.254.100.109,
on dev eth0
ll header: 00000000: ff ff ff ff ff ff 40 00 ad fe 64 6d
08 06 [email protected]..
IPv4: martian source 173.254.95.16 from 173.254.100.109,
on dev eth1
ll header: 00000000: ff ff ff ff ff ff 40 00 ad fe 64 6d
08 06 [email protected]..
There is no description of this kind of source in the RFC1812.
David S. Miller [Tue, 15 Feb 2022 14:22:05 +0000 (14:22 +0000)]
Merge tag 'ieee802154-for-net-2022-02-15' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan
Stefan Schmidt says:
====================
Only a single fix this time.
Miquel Raynal fixed the lifs/sifs periods in the ca82010 to take the actual
symbol duration time into account.
====================
DENG Qingfang [Wed, 9 Feb 2022 14:39:47 +0000 (22:39 +0800)]
net: phy: mediatek: remove PHY mode check on MT7531
The function mt7531_phy_mode_supported in the DSA driver set supported
mode to PHY_INTERFACE_MODE_GMII instead of PHY_INTERFACE_MODE_INTERNAL
for the internal PHY, so this check breaks the PHY initialization:
mt7530 mdio-bus:00 wan (uninitialized): failed to connect to PHY: -EINVAL
Add the 'ifdef CONFIG_PPC64' around the 'ptesync' in function
'emulate_update_regs()' to like it is in 'analyse_instr()'. Since it looks like
it got dropped inadvertently by commit 3cdfcbfd32b9 ("powerpc: Change
analyse_instr so it doesn't modify *regs").
A key detail is that analyse_instr() will never recognise lwsync or
ptesync on 32-bit (because of the existing ifdef), and as a result
emulate_update_regs() should never be called with an op specifying
either of those on 32-bit. So removing them from emulate_update_regs()
should be a nop in terms of runtime behaviour.
Yongzhi Liu [Sun, 16 Jan 2022 05:34:56 +0000 (21:34 -0800)]
dmaengine: shdma: Fix runtime PM imbalance on error
pm_runtime_get_() increments the runtime PM usage counter even
when it returns an error code, thus a matching decrement is needed on
the error handling path to keep the counter balanced.
Jiasheng Jiang [Thu, 6 Jan 2022 03:09:39 +0000 (11:09 +0800)]
dmaengine: sh: rcar-dmac: Check for error num after setting mask
Because of the possible failure of the dma_supported(), the
dma_set_mask_and_coherent() may return error num.
Therefore, it should be better to check it and return the error if
fails.
Jon Maloy [Mon, 14 Feb 2022 01:38:52 +0000 (20:38 -0500)]
tipc: fix wrong publisher node address in link publications
When a link comes up we add its presence to the name table to make it
possible for users to subscribe for link up/down events. However, after
a previous call signature change the binding is wrongly published with
the peer node as publishing node, instead of the own node as it should
be. This has the effect that the command 'tipc name table show' will
list the link binding (service type 2) with node scope and a peer node
as originator, something that obviously is impossible.
dmaengine: ptdma: Fix the error handling path in pt_core_init()
In order to free resources correctly in the error handling path of
pt_core_init(), 2 goto's have to be switched. Otherwise, some resources
will leak and we will try to release things that have not been allocated
yet.
Also move a dev_err() to a place where it is more meaningful.
James Smart [Sat, 12 Feb 2022 16:31:20 +0000 (08:31 -0800)]
scsi: lpfc: Fix pt2pt NVMe PRLI reject LOGO loop
When connected point to point, the driver does not know the FC4's supported
by the other end. In Fabrics, it can query the nameserver. Thus the driver
must send PRLIs for the FC4s it supports and enable support based on the
acc(ept) or rej(ect) of the respective FC4 PRLI. Currently the driver
supports SCSI and NVMe PRLIs.
Unfortunately, although the behavior is per standard, many devices have
come to expect only SCSI PRLIs. In this particular example, the NVMe PRLI
is properly RJT'd but the target decided that it must LOGO after seeing the
unexpected NVMe PRLI. The LOGO causes the sequence to restart and login is
now in an infinite failure loop.
Fix the problem by having the driver, on a pt2pt link, remember NVMe PRLI
accept or reject status across logout as long as the link stays "up". When
retrying login, if the prior NVMe PRLI was rejected, it will not be sent on
the next login.
Choose some other visible function for the test. The function does not
have to be actually executed during the test, because it is only testing
filter API interface.
RISC-V: Fix IPI/RFENCE hmask on non-monotonic hartid ordering
If the boot CPU does not have the lowest hartid, "hartid - hbase" can
become negative, leading to an incorrect hmask, causing userspace to
crash with SEGV. This is observed on e.g. Starlight Beta, where cpuid 1
maps to hartid 0, and cpuid 0 maps to hartid 1.
Fix this by detecting this case, and shifting the accumulated mask and
updating hbase, if possible.
Fixes: 26fb751ca37846c9 ("RISC-V: Do not use cpumask data structure for hartid bitmap") Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Atish Patra <[email protected]> Tested-by: Atish Patra <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
Rajib Mahapatra [Thu, 10 Feb 2022 13:16:40 +0000 (18:46 +0530)]
drm/amdgpu: skipping SDMA hw_init and hw_fini for S0ix.
[Why]
SDMA ring buffer test failed if suspend is aborted during
S0i3 resume.
[How]
If suspend is aborted for some reason during S0i3 resume
cycle, it follows SDMA ring test failing and errors in amdgpu
resume. For RN/CZN/Picasso, SMU saves and restores SDMA
registers during S0ix cycle. So, skipping SDMA suspend and
resume from driver solves the issue. This time, the system
is able to resume gracefully even the suspend is aborted.
Trond Myklebust [Tue, 8 Feb 2022 18:38:23 +0000 (13:38 -0500)]
NFS: LOOKUP_DIRECTORY is also ok with symlinks
Commit ac795161c936 (NFSv4: Handle case where the lookup of a directory
fails) [1], part of Linux since 5.17-rc2, introduced a regression, where
a symbolic link on an NFS mount to a directory on another NFS does not
resolve(?) the first time it is accessed:
Trond Myklebust [Tue, 8 Feb 2022 17:14:44 +0000 (12:14 -0500)]
NFS: Remove an incorrect revalidation in nfs4_update_changeattr_locked()
In nfs4_update_changeattr_locked(), we don't need to set the
NFS_INO_REVAL_PAGECACHE flag, because we already know the value of the
change attribute, and we're already flagging the size. In fact, this
forces us to revalidate the change attribute a second time for no good
reason.
This extra flag appears to have been introduced as part of the xattr
feature, when update_changeattr_locked() was converted for use by the
xattr code.
Fixes: 1b523ca972ed ("nfs: modify update_changeattr to deal with regular files") Signed-off-by: Trond Myklebust <[email protected]> Signed-off-by: Anna Schumaker <[email protected]>
Randy Dunlap [Mon, 14 Feb 2022 18:00:19 +0000 (10:00 -0800)]
serial: parisc: GSC: fix build when IOSAPIC is not set
There is a build error when using a kernel .config file from
'kernel test robot' for a different build problem:
hppa64-linux-ld: drivers/tty/serial/8250/8250_gsc.o: in function `.LC3':
(.data.rel.ro+0x18): undefined reference to `iosapic_serial_irq'
when:
CONFIG_GSC=y
CONFIG_SERIO_GSCPS2=y
CONFIG_SERIAL_8250_GSC=y
CONFIG_PCI is not set
and hence PCI_LBA is not set.
IOSAPIC depends on PCI_LBA, so IOSAPIC is not set/enabled.
Make the use of iosapic_serial_irq() conditional to fix the build error.
Sherry Yang [Thu, 10 Feb 2022 20:30:49 +0000 (12:30 -0800)]
selftests/seccomp: Fix seccomp failure by adding missing headers
seccomp_bpf failed on tests 47 global.user_notification_filter_empty
and 48 global.user_notification_filter_empty_threaded when it's
tested on updated kernel but with old kernel headers. Because old
kernel headers don't have definition of macro __NR_clone3 which is
required for these two tests. Since under selftests/, we can install
headers once for all tests (the default INSTALL_HDR_PATH is
usr/include), fix it by adding usr/include to the list of directories
to be searched. Use "-isystem" to indicate it's a system directory as
the real kernel headers directories are.
Linus Torvalds [Mon, 14 Feb 2022 17:51:26 +0000 (09:51 -0800)]
Merge tag 'regulator-fix-v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One fix here, for initialisation of regulators that don't have an
in_enabled() operation which would mainly impact cases where they
aren't otherwise used during early setup for some reason"
* tag 'regulator-fix-v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: fix false positive in regulator_late_cleanup()
Takashi Iwai [Mon, 14 Feb 2022 16:55:39 +0000 (17:55 +0100)]
Merge tag 'asoc-fix-v5.17-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.18
More fixes that have arrived in the past few -rcs, plus a MAINTAINERS
update. The biggest update here is the fix for control change
notifications in ASoC generic controls found by mixer-test.
Ronnie Sahlberg [Sun, 13 Feb 2022 22:40:52 +0000 (08:40 +1000)]
cifs: modefromsids must add an ACE for authenticated users
When we create a file with modefromsids we set an ACL that
has one ACE for the magic modefromsid as well as a second ACE that
grants full access to all authenticated users.
When later we chante the mode on the file we strip away this, and other,
ACE for authenticated users in set_chmod_dacl() and then just add back/update
the modefromsid ACE.
Thus leaving the file with a single ACE that is for the mode and no ACE
to grant any user any rights to access the file.
Fix this by always adding back also the modefromsid ACE so that we do not
drop the rights to access the file.
HID: amd_sfh: Add interrupt handler to process interrupts
On newer AMD platforms with SFH, it is observed that random interrupts
get generated on the SFH hardware and until this is cleared the firmware
sensor processing is stalled, resulting in no data been received to
driver side.
Add routines to handle these interrupts, so that firmware operations are
not stalled.
HID: amd_sfh: Add functionality to clear interrupts
Newer AMD platforms with SFH may generate interrupts on some events
which are unwarranted. Until this is cleared the actual MP2 data
processing maybe stalled in some cases.
Add a mechanism to clear the pending interrupts (if any) during the
driver initialization and sensor command operations.
HID: amd_sfh: Handle amd_sfh work buffer in PM ops
Since in the current amd_sfh design the sensor data is periodically
obtained in the form of poll data, during the suspend/resume cycle,
scheduling a delayed work adds no value.
So, cancel the work and restart back during the suspend/resume cycle
respectively.
Alex Maydanik [Sat, 12 Feb 2022 10:29:27 +0000 (12:29 +0200)]
net: fix documentation for kernel_getsockname
Fixes return value documentation of kernel_getsockname()
and kernel_getpeername() functions.
The previous documentation wrongly specified that the return
value is 0 in case of success, however sock->ops->getname returns
the length of the address in bytes in case of success.
value changed: 0xffffffff85dee080 -> 0xffff88815d96ec00
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 13560 Comm: syz-executor.2 Not tainted 5.17.0-rc3-syzkaller-00116-gf1baf68e1383-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Vladimir Oltean [Fri, 11 Feb 2022 17:45:06 +0000 (19:45 +0200)]
net: dsa: mv88e6xxx: flush switchdev FDB workqueue before removing VLAN
mv88e6xxx is special among DSA drivers in that it requires the VTU to
contain the VID of the FDB entry it modifies in
mv88e6xxx_port_db_load_purge(), otherwise it will return -EOPNOTSUPP.
Sometimes due to races this is not always satisfied even if external
code does everything right (first deletes the FDB entries, then the
VLAN), because DSA commits to hardware FDB entries asynchronously since
commit c9eb3e0f8701 ("net: dsa: Add support for learning FDB through
notification").
Therefore, the mv88e6xxx driver must close this race condition by
itself, by asking DSA to flush the switchdev workqueue of any FDB
deletions in progress, prior to exiting a VLAN.
Fixes: c9eb3e0f8701 ("net: dsa: Add support for learning FDB through notification") Reported-by: Rafael Richter <[email protected]> Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Ignat Korchagin [Fri, 11 Feb 2022 17:30:42 +0000 (17:30 +0000)]
ipv6: mcast: use rcu-safe version of ipv6_get_lladdr()
Some time ago 8965779d2c0e ("ipv6,mcast: always hold idev->lock before mca_lock")
switched ipv6_get_lladdr() to __ipv6_get_lladdr(), which is rcu-unsafe
version. That was OK, because idev->lock was held for these codepaths.
In 88e2ca308094 ("mld: convert ifmcaddr6 to RCU") these external locks were
removed, so we probably need to restore the original rcu-safe call.
Otherwise, we occasionally get a machine crashed/stalled with the following
in dmesg:
Fixes: 88e2ca308094 ("mld: convert ifmcaddr6 to RCU") Reported-by: David Pinilla Caparros <[email protected]> Signed-off-by: Ignat Korchagin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Takashi Iwai [Mon, 14 Feb 2022 13:04:10 +0000 (14:04 +0100)]
ALSA: hda/realtek: Fix deadlock by COEF mutex
The recently introduced coef_mutex for Realtek codec seems causing a
deadlock when the relevant code is invoked from the power-off state;
then the HD-audio core tries to power-up internally, and this kicks
off the codec runtime PM code that tries to take the same coef_mutex.
In order to avoid the deadlock, do the temporary power up/down around
the coef_mutex acquisition and release. This assures that the
power-up sequence runs before the mutex, hence no re-entrance will
happen.
Takashi Iwai [Mon, 14 Feb 2022 12:57:11 +0000 (13:57 +0100)]
ALSA: usb-audio: Don't abort resume upon errors
The default mixer resume code treats the errors at restoring the
modified mixer items as a fatal error, and it returns back to the
caller. This ends up in the resume failure, and the device will be
come unavailable, although basically those errors are intermittent and
can be safely ignored.
The problem itself has been present from the beginning, but it didn't
hit usually because the code tries to resume only the modified items.
But now with the recent commit to forcibly initialize each item at the
probe time, the problem surfaced more often, hence it appears as a
regression.
This patch fixes the regression simply by ignoring the errors at
resume.
Jim Mattson [Thu, 3 Feb 2022 01:48:13 +0000 (17:48 -0800)]
KVM: x86/pmu: Use AMD64_RAW_EVENT_MASK for PERF_TYPE_RAW
AMD's event select is 3 nybbles, with the high nybble in bits 35:32 of
a PerfEvtSeln MSR. Don't mask off the high nybble when configuring a
RAW perf event.
Jim Mattson [Thu, 3 Feb 2022 01:48:12 +0000 (17:48 -0800)]
KVM: x86/pmu: Don't truncate the PerfEvtSeln MSR when creating a perf event
AMD's event select is 3 nybbles, with the high nybble in bits 35:32 of
a PerfEvtSeln MSR. Don't drop the high nybble when setting up the
config field of a perf_event_attr structure for a call to
perf_event_create_kernel_counter().
Helge Deller [Sun, 13 Feb 2022 21:52:11 +0000 (22:52 +0100)]
parisc: Fix some apparent put_user() failures
After commit 4b9d2a731c3d ("parisc: Switch user access functions
to signal errors in r29 instead of r8") bash suddenly started
to report those warnings after login:
-bash: cannot set terminal process group (-1): Bad file descriptor
-bash: no job control in this shell
It turned out, that a function call inside a put_user(), e.g.:
put_user(vt_do_kdgkbmode(console), (int __user *)arg);
clobbered the error register (r29) and thus the put_user() call itself
seem to have failed.
Rearrange the C-code to pre-calculate the intermediate value
and then do the put_user().
Additionally prefer the "+" constraint on pu_err and gu_err registers
to tell the compiler that those operands are both read and written by
the assembly instruction.
Reported-by: John David Anglin <[email protected]> Signed-off-by: Helge Deller <[email protected]> Fixes: 4b9d2a731c3d ("parisc: Switch user access functions to signal errors in r29 instead of r8") Signed-off-by: Helge Deller <[email protected]>
Jesse Brandeburg [Fri, 11 Feb 2022 17:14:18 +0000 (09:14 -0800)]
ice: enable parsing IPSEC SPI headers for RSS
The COMMS package can enable the hardware parser to recognize IPSEC
frames with ESP header and SPI identifier. If this package is available
and configured for loading in /lib/firmware, then the driver will
succeed in enabling this protocol type for RSS.
This in turn allows the hardware to hash over the SPI and use it to pick
a consistent receive queue for the same secure flow. Without this all
traffic is steered to the same queue for multiple traffic threads from
the same IP address. For that reason this is marked as a fix, as the
driver supports the model, but it wasn't enabled.
If the package is not available, adding this type will fail, but the
failure is ignored on purpose as it has no negative affect.
Fixes: c90ed40cefe1 ("ice: Enable writing hardware filtering tables") Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Gurucharan G <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Takashi Iwai [Mon, 14 Feb 2022 10:00:20 +0000 (11:00 +0100)]
ALSA: hda: Fix missing codec probe on Shenker Dock 15
By some unknown reason, BIOS on Shenker Dock 15 doesn't set up the
codec mask properly for the onboard audio. Let's set the forced codec
mask to enable the codec discovery.
Takashi Iwai [Mon, 14 Feb 2022 10:00:19 +0000 (11:00 +0100)]
ALSA: hda: Fix regression on forced probe mask option
The forced probe mask via probe_mask 0x100 bit doesn't work any longer
as expected since the bus init code was moved and it's clearing the
codec_mask value that was set beforehand. This patch fixes the
long-time regression by moving the check_probe_mask() call.
Jani Nikula [Thu, 10 Feb 2022 10:36:42 +0000 (12:36 +0200)]
drm/i915/opregion: check port number bounds for SWSCI display power state
The mapping from enum port to whatever port numbering scheme is used by
the SWSCI Display Power State Notification is odd, and the memory of it
has faded. In any case, the parameter only has space for ports numbered
[0..4], and UBSAN reports bit shift beyond it when the platform has port
F or more.
Since the SWSCI functionality is supposed to be obsolete for new
platforms (i.e. ones that might have port F or more), just bail out
early if the mapped and mangled port number is beyond what the Display
Power State Notification can support.
projects / linux.git / log