Olof Johansson [Fri, 22 Jan 2016 16:28:23 +0000 (08:28 -0800)]
Merge tag 'renesas-fixes-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes
Renesas ARM Based SoC Fixes for v4.5
Correct extal1 frequency of armadillo800eva board
* tag 'renesas-fixes-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: dts: armadillo800eva Correct extal1 frequency to 24 MHz
Arnd Bergmann [Sun, 17 Jan 2016 00:02:56 +0000 (01:02 +0100)]
soc: qcom/spm: shut up uninitialized variable warning
gcc warns about the 'found' variable possibly being used uninitialized:
drivers/soc/qcom/spm.c: In function 'spm_dev_probe':
drivers/soc/qcom/spm.c:305:5: error: 'found' may be used uninitialized in this function [-Werror=maybe-uninitialized]
However, the code is correct because we know that there is
always at least one online CPU. This initializes the 'found'
variable to zero before the loop so the compiler knows
it does not have to warn about it.
Linus Torvalds [Fri, 22 Jan 2016 03:58:02 +0000 (19:58 -0800)]
Merge branch 'for-4.5/nvme' of git://git.kernel.dk/linux-block
Pull NVMe updates from Jens Axboe:
"Last branch for this series is the nvme changes. It's in a separate
branch to avoid splitting too much between core and NVMe changes,
since NVMe is still helping drive some blk-mq changes. That said, not
a huge amount of core changes in here. The grunt of the work is the
continued split of the code"
* 'for-4.5/nvme' of git://git.kernel.dk/linux-block: (67 commits)
uapi: update install list after nvme.h rename
NVMe: Export NVMe attributes to sysfs group
NVMe: Shutdown controller only for power-off
NVMe: IO queue deletion re-write
NVMe: Remove queue freezing on resets
NVMe: Use a retryable error code on reset
NVMe: Fix admin queue ring wrap
nvme: make SG_IO support optional
nvme: fixes for NVME_IOCTL_IO_CMD on the char device
nvme: synchronize access to ctrl->namespaces
nvme: Move nvme_freeze/unfreeze_queues to nvme core
PCI/AER: include header file
NVMe: Export namespace attributes to sysfs
NVMe: Add pci error handlers
block: remove REQ_NO_TIMEOUT flag
nvme: merge iod and cmd_info
nvme: meta_sg doesn't have to be an array
nvme: properly free resources for cancelled command
nvme: simplify completion handling
nvme: special case AEN requests
...
Linus Torvalds [Fri, 22 Jan 2016 03:01:55 +0000 (19:01 -0800)]
Merge branch 'for-4.5/lightnvm' of git://git.kernel.dk/linux-block
Pull lightnvm fixes and updates from Jens Axboe:
"This should have been part of the drivers branch, but it arrived a bit
late and wasn't based on the official core block driver branch. So
they got a small scolding, but got a pass since it's still new. Hence
it's in a separate branch.
This is mostly pure fixes, contained to lightnvm/, and minor feature
additions"
* 'for-4.5/lightnvm' of git://git.kernel.dk/linux-block: (26 commits)
lightnvm: ensure that nvm_dev_ops can be used without CONFIG_NVM
lightnvm: introduce factory reset
lightnvm: use system block for mm initialization
lightnvm: introduce ioctl to initialize device
lightnvm: core on-disk initialization
lightnvm: introduce mlc lower page table mappings
lightnvm: add mccap support
lightnvm: manage open and closed blocks separately
lightnvm: fix missing grown bad block type
lightnvm: reference rrpc lun in rrpc block
lightnvm: introduce nvm_submit_ppa
lightnvm: move rq->error to nvm_rq->error
lightnvm: support multiple ppas in nvm_erase_ppa
lightnvm: move the pages per block check out of the loop
lightnvm: sectors first in ppa list
lightnvm: fix locking and mempool in rrpc_lun_gc
lightnvm: put block back to gc list on its reclaim fail
lightnvm: check bi_error in gc
lightnvm: return the get_bb_tbl return value
lightnvm: refactor end_io functions for sync
...
Linus Torvalds [Fri, 22 Jan 2016 02:19:38 +0000 (18:19 -0800)]
Merge branch 'for-4.5/drivers' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"This is the block driver pull request for 4.5, with the exception of
NVMe, which is in a separate branch and will be posted after this one.
This pull request contains:
- A set of bcache stability fixes, which have been acked by Kent.
These have been used and tested for more than a year by the
community, so it's about time that they got in.
- A set of drbd updates from the drbd team (Andreas, Lars, Philipp)
and Markus Elfring, Oleg Drokin.
- A set of fixes for xen blkback/front from the usual suspects, (Bob,
Konrad) as well as community based fixes from Kiri, Julien, and
Peng.
- A 2038 time fix for sx8 from Shraddha, with a fix from me.
- A small mtip32xx cleanup from Zhu Yanjun.
- A null_blk division fix from Arnd"
* 'for-4.5/drivers' of git://git.kernel.dk/linux-block: (71 commits)
null_blk: use sector_div instead of do_div
mtip32xx: restrict variables visible in current code module
xen/blkfront: Fix crash if backend doesn't follow the right states.
xen/blkback: Fix two memory leaks.
xen/blkback: make st_ statistics per ring
xen/blkfront: Handle non-indirect grant with 64KB pages
xen-blkfront: Introduce blkif_ring_get_request
xen-blkback: clear PF_NOFREEZE for xen_blkif_schedule()
xen/blkback: Free resources if connect_ring failed.
xen/blocks: Return -EXX instead of -1
xen/blkback: make pool of persistent grants and free pages per-queue
xen/blkback: get the number of hardware queues/rings from blkfront
xen/blkback: pseudo support for multi hardware queues/rings
xen/blkback: separate ring information out of struct xen_blkif
xen/blkfront: correct setting for xen_blkif_max_ring_order
xen/blkfront: make persistent grants pool per-queue
xen/blkfront: Remove duplicate setting of ->xbdev.
xen/blkfront: Cleanup of comments, fix unaligned variables, and syntax errors.
xen/blkfront: negotiate number of queues/rings to be used with backend
xen/blkfront: split per device io_lock
...
Tariq Saeed [Fri, 22 Jan 2016 00:40:39 +0000 (16:40 -0800)]
ocfs2: NFS hangs in __ocfs2_cluster_lock due to race with ocfs2_unblock_lock
NFS on a 2 node ocfs2 cluster each node exporting dir. The lock causing
the hang is the global bit map inode lock. Node 1 is master, has the
lock granted in PR mode; Node 2 is in the converting list (PR -> EX).
There are no holders of the lock on the master node so it should
downconvert to NL and grant EX to node 2 but that does not happen.
BLOCKED + QUEUED in lock res are set and it is on osb blocked list.
Threads are waiting in __ocfs2_cluster_lock on BLOCKED. One thread
wants EX, rest want PR. So it is as though the downconvert thread needs
to be kicked to complete the conv.
The hang is caused by an EX req coming into __ocfs2_cluster_lock on the
heels of a PR req after it sets BUSY (drops l_lock, releasing EX
thread), forcing the incoming EX to wait on BUSY without doing anything.
PR has called ocfs2_dlm_lock, which sets the node 1 lock from NL -> PR,
queues ast.
At this time, upconvert (PR ->EX) arrives from node 2, finds conflict
with node 1 lock in PR, so the lock res is put on dlm thread's dirty
listt.
After ret from ocf2_dlm_lock, PR thread now waits behind EX on BUSY till
awoken by ast.
Now it is dlm_thread that serially runs dlm_shuffle_lists, ast, bast, in
that order. dlm_shuffle_lists ques a bast on behalf of node 2 (which
will be run by dlm_thread right after the ast). ast does its part, sets
UPCONVERT_FINISHING, clears BUSY and wakes its waiters. Next,
dlm_thread runs bast. It sets BLOCKED and kicks dc thread. dc thread
runs ocfs2_unblock_lock, but since UPCONVERT_FINISHING set, skips doing
anything and reques.
Inside of __ocfs2_cluster_lock, since EX has been waiting on BUSY ahead
of PR, it wakes up first, finds BLOCKED set and skips doing anything but
clearing UPCONVERT_FINISHING (which was actually "meant" for the PR
thread), and this time waits on BLOCKED. Next, the PR thread comes out
of wait but since UPCONVERT_FINISHING is not set, it skips updating the
l_ro_holders and goes straight to wait on BLOCKED. So there, we have a
hang! Threads in __ocfs2_cluster_lock wait on BLOCKED, lock res in osb
blocked list. Only when dc thread is awoken, it will run
ocfs2_unblock_lock and things will unhang.
One way to fix this is to wake the dc thread on the flag after clearing
UPCONVERT_FINISHING
Sudip Mukherjee [Fri, 22 Jan 2016 00:40:36 +0000 (16:40 -0800)]
reiserfs: fix dereference of ERR_PTR
reiserfs_iget() returns either NULL or error code in ERR_PTR. And we
were only checking for NULL, so in case of some other error we will try
to dereference the ERR_PTR(-errno) thinking it to be a valid pointer.
Jaewon Kim [Fri, 22 Jan 2016 00:55:07 +0000 (16:55 -0800)]
ratelimit: fix bug in time interval by resetting right begin time
rs->begin in ratelimit is set in two cases.
1) when rs->begin was not initialized
2) when rs->interval was passed
For case #2, current ratelimit sets the begin to 0. This incurrs
improper suppression. The begin value will be set in the next ratelimit
call by 1). Then the time interval check will be always false, and
rs->printed will not be initialized. Although enough time passed,
ratelimit may return 0 if rs->printed is not less than rs->burst. To
reset interval properly, begin should be jiffies rather than 0.
For an example code below:
static DEFINE_RATELIMIT_STATE(mylimit, 1, 1);
for (i = 1; i <= 10; i++) {
if (__ratelimit(&mylimit))
printk("ratelimit test count %d\n", i);
msleep(3000);
}
test result in the current code shows suppression even there is 3 seconds sleep.
[ 78.391148] ratelimit test count 1
[ 81.295988] ratelimit test count 2
[ 87.315981] ratelimit test count 4
[ 93.336267] ratelimit test count 6
[ 99.356031] ratelimit test count 8
[ 105.376367] ratelimit test count 10
It happens on munlock_vma_page() due to unfortunate choice of nr_pages
data type:
__mod_zone_page_state(zone, NR_MLOCK, -nr_pages);
For unsigned int nr_pages, implicitly casted to long in
__mod_zone_page_state(), it becomes something around UINT_MAX.
munlock_vma_page() usually called for THP as small pages go though
pagevec.
Let's make nr_pages signed int.
Similar fixes in 6cdb18ad98a4 ("mm/vmstat: fix overflow in
mod_zone_page_state()") used `long' type, but `int' here is OK for a
count of the number of sub-pages in a huge page.
thp: change pmd_trans_huge_lock() interface to return ptl
After THP refcounting rework we have only two possible return values
from pmd_trans_huge_lock(): success and failure. Return-by-pointer for
ptl doesn't make much sense in this case.
Let's convert pmd_trans_huge_lock() to return ptl on success and NULL on
failure.
Huacai Chen [Thu, 21 Jan 2016 13:09:50 +0000 (21:09 +0800)]
MIPS: hpet: Choose a safe value for the ETIME check
This patch is borrowed from x86 hpet driver and explaind below:
Due to the overly intelligent design of HPETs, we need to workaround
the problem that the compare value which we write is already behind
the actual counter value at the point where the value hits the real
compare register. This happens for two reasons:
1) We read out the counter, add the delta and write the result to the
compare register. When a NMI hits between the read out and the write
then the counter can be ahead of the event already.
2) The write to the compare register is delayed by up to two HPET
cycles in AMD chipsets.
We can work around this by reading back the compare register to make
sure that the written value has hit the hardware. But that is bad
performance wise for the normal case where the event is far enough in
the future.
As we already know that the write can be delayed by up to two cycles
we can avoid the read back of the compare register completely if we
make the decision whether the delta has elapsed already or not based
on the following calculation:
cmp = event - actual_count;
If cmp is less than 64 HPET clock cycles, then we decide that the event
has happened already and return -ETIME. That covers the above #1 and #2
problems which would cause a wait for HPET wraparound (~306 seconds).
Huacai Chen [Thu, 21 Jan 2016 13:09:49 +0000 (21:09 +0800)]
MIPS: Loongson-3: Fix SMP_ASK_C0COUNT IPI handler
When Core-0 handle SMP_ASK_C0COUNT IPI, we should make other cores to
see the result as soon as possible (especially when Store-Fill-Buffer
is enabled). Otherwise, C0_Count syncronization makes no sense.
BTW, array is more suitable than per-cpu variable for syncronization,
and there is a corner case should be avoid: C0_Count of Core-0 can be
really 0.
Huacai Chen [Thu, 21 Jan 2016 13:09:48 +0000 (21:09 +0800)]
MIPS: Loongson-3: Improve -march option and move it to Platform
If GCC >= 4.9 and Binutils >=2.25, we use -march=loongson3a, otherwise
we use -march=mips64r2, this can slightly improve performance. Besides,
arch/mips/loongson64/Platform is a better location rather than arch/
mips/Makefile.
Allen Hubbe [Thu, 21 Jan 2016 17:53:50 +0000 (12:53 -0500)]
NTB: Fix macro parameter conflict with field name
If the parameter given to the macro is replaced throughout the macro as
it is evaluated. The intent is that the macro parameter should replace
the only the first parameter to container_of(). However, the way the
macro was written, it would also inadvertantly replace a structure field
name. If a parameter of any other name is given to the macro, it will
fail to compile, if the structure does not contain a field of the same
name. At worst, it will compile, and hide improper access of an
unintended field in the structure.
Change the macro parameter name, so it does not conflict with the
structure field name.
Xiangliang Yu [Thu, 21 Jan 2016 11:47:05 +0000 (19:47 +0800)]
NTB: Add support for AMD PCI-Express Non-Transparent Bridge
This adds support for AMD's PCI-Express Non-Transparent Bridge
(NTB) device on the Zeppelin platform. The driver connnects to the
standard NTB sub-system interface, with modification to add hooks
for power management in a separate patch. The AMD NTB device has 3
memory windows, 16 doorbell, 16 scratch-pad registers, and supports
up to 16 PCIe lanes running a Gen3 speeds.
Linus Torvalds [Thu, 21 Jan 2016 21:02:41 +0000 (13:02 -0800)]
Merge branch 'uaccess' (batched user access infrastructure)
Expose an interface to allow users to mark several accesses together as
being user space accesses, allowing batching of the surrounding user
space access markers (SMAP on x86, PAN on arm64, domain register
switching on arm).
This is currently only used for the user string lenth and copying
functions, where the SMAP overhead on x86 drowned the actual user
accesses (only noticeable on newer microarchitectures that support SMAP
in the first place, of course).
* user access batching branch:
Use the new batched user accesses in generic user string handling
Add 'unsafe' user access functions for batched accesses
x86: reorganize SMAP handling in user space accesses
I noticed that all the callers of this function pass cinfo->mds->list as
an argument in addition to the cinfo structure itself. Let's get rid of
the extra argument, since it doesn't seem to be adding anything.
Trond Myklebust [Thu, 21 Jan 2016 19:48:49 +0000 (14:48 -0500)]
pNFS/flexfiles: Improve merging of errors in LAYOUTRETURN
When we hit 22 errors, we start to overflow the memory buffers allocated
to the LAYOUTRETURN errors. The issue is that currently, RPC call reply
ordering determines how successful we are in merging errors that refer
to contiguous READ or WRITE requests.
Fix is to use an insertion sort to help detect contiguity.
- more dma-mapping cleanups/simplifications from hch"
* emailed patches from Andrew Morton <[email protected]>: (109 commits)
MAINTAINERS: add/fix git URLs for various subsystems
mm: memcontrol: add "sock" to cgroup2 memory.stat
mm: memcontrol: basic memory statistics in cgroup2 memory controller
mm: memcontrol: do not uncharge old page in page cache replacement
Documentation: cgroup: add memory.swap.{current,max} description
mm: free swap cache aggressively if memcg swap is full
mm: vmscan: do not scan anon pages if memcg swap limit is hit
swap.h: move memcg related stuff to the end of the file
mm: memcontrol: replace mem_cgroup_lruvec_online with mem_cgroup_online
mm: vmscan: pass memcg to get_scan_count()
mm: memcontrol: charge swap to cgroup2
mm: memcontrol: clean up alloc, online, offline, free functions
mm: memcontrol: flatten struct cg_proto
mm: memcontrol: rein in the CONFIG space madness
net: drop tcp_memcontrol.c
mm: memcontrol: introduce CONFIG_MEMCG_LEGACY_KMEM
mm: memcontrol: allow to disable kmem accounting for cgroup2
mm: memcontrol: account "kmem" consumers in cgroup2 memory controller
mm: memcontrol: move kmem accounting code to CONFIG_MEMCG
mm: memcontrol: separate kmem code from legacy tcp accounting code
...
Linus Torvalds [Thu, 21 Jan 2016 20:20:46 +0000 (12:20 -0800)]
Merge branch 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs updates from Miklos Szeredi:
"This contains several bug fixes and a new mount option
'default_permissions' that allows read-only exported NFS
filesystems to be used as lower layer"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: check dentry positiveness in ovl_cleanup_whiteouts()
ovl: setattr: check permissions before copy-up
ovl: root: copy attr
ovl: move super block magic number to magic.h
ovl: use a minimal buffer in ovl_copy_xattr
ovl: allow zero size xattr
ovl: default permissions
Linus Torvalds [Thu, 21 Jan 2016 19:52:16 +0000 (11:52 -0800)]
Merge tag 'pci-v4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"PCI changes for the v4.5 merge window:
Enumeration:
- Simplify config space size computation (Bjorn Helgaas)
- Avoid iterating through ROM outside the resource window (Edward O'Callaghan)
- Support PCIe devices with short cfg_size (Jason S. McMullan)
- Add Netronome vendor and device IDs (Jason S. McMullan)
- Limit config space size for Netronome NFP6000 family (Jason S. McMullan)
- Add Netronome NFP4000 PF device ID (Simon Horman)
- Limit config space size for Netronome NFP4000 (Simon Horman)
- Print warnings for all invalid expansion ROM headers (Vladis Dronov)
Linus Torvalds [Thu, 21 Jan 2016 19:45:02 +0000 (11:45 -0800)]
Merge tag 'pwm/for-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This set of changes contains a new driver for OMAP (using the
dual-mode timers) as well as an assortment of fixes all across the
board"
* tag 'pwm/for-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: Mark all devices as "might sleep"
pwm: omap-dmtimer: Potential NULL dereference on error
pwm: add HAS_IOMEM dependency to PWM_FSL_FTM
pwm: Add PWM driver for OMAP using dual-mode timers
pwm: rcar: Improve accuracy of frequency division setting
pwm: lpc32xx: return ERANGE, if requested period is not supported
pwm: lpc32xx: fix and simplify duty cycle and period calculations
pwm: lpc32xx: make device usable with common clock framework
pwm: lpc32xx: correct number of PWM channels from 2 to 1
dt: lpc32xx: pwm: update documentation of LPC32xx PWM device
dt: lpc32xx: pwm: correct LPC32xx PWM device node example
pwm: fsl-ftm: Fix clock enable/disable when using PM
pwm: lpss: Rework the sequence of programming PWM_SW_UPDATE
pwm: lpss: Select core part automatically
pwm: lpss: Update PWM setting for Broxton
pwm: bcm2835: Fix email address specification
pwm: bcm2835: Prevent division by zero
pwm: bcm2835: Calculate scaler in ->config()
pwm: lpss: Remove ->free() callback
Ilya Dryomov [Mon, 18 Jan 2016 15:53:31 +0000 (16:53 +0100)]
libceph: remove outdated comment
MClientMount{,Ack} are long gone. The receipt of bare monmap doesn't
actually indicate a mount success as we are yet to authenticate at that
point in time.
Ilya Dryomov [Thu, 14 Jan 2016 16:31:51 +0000 (17:31 +0100)]
libceph: invalidate AUTH in addition to a service ticket
If we fault due to authentication, we invalidate the service ticket we
have and request a new one - the idea being that if a service rejected
our authorizer, it must have expired, despite mon_client's attempts at
periodic renewal. (The other possibility is that our ticket is too new
and the service hasn't gotten it yet, in which case invalidating isn't
necessary but doesn't hurt.)
Invalidating just the service ticket is not enough, though. If we
assume a failure on mon_client's part to renew a service ticket, we
have to assume the same for the AUTH ticket. If our AUTH ticket is
bad, we won't get any service tickets no matter how hard we try, so
invalidate AUTH ticket along with the service ticket.
Ilya Dryomov [Thu, 14 Jan 2016 15:35:35 +0000 (16:35 +0100)]
libceph: fix authorizer invalidation, take 2
Back in 2013, commit 4b8e8b5d78b8 ("libceph: fix authorizer
invalidation") tried to fix authorizer invalidation issues by clearing
validity field. However, nothing ever consults this field, so it
doesn't force us to request any new secrets in any way and therefore we
never get out of the exponential backoff mode:
Ilya Dryomov [Wed, 13 Jan 2016 13:32:57 +0000 (14:32 +0100)]
libceph: clear messenger auth_retry flag if we fault
Commit 20e55c4cc758 ("libceph: clear messenger auth_retry flag when we
authenticate") got us only half way there. We clear the flag if the
second attempt succeeds, but it also needs to be cleared if that
attempt fails, to allow for the exponential backoff to kick in.
Otherwise, if ->should_authenticate() thinks our keys are valid, we
will busy loop, incrementing auth_retry to no avail:
Ilya Dryomov [Mon, 28 Dec 2015 10:18:34 +0000 (13:18 +0300)]
libceph: fix ceph_msg_revoke()
There are a number of problems with revoking a "was sending" message:
(1) We never make any attempt to revoke data - only kvecs contibute to
con->out_skip. However, once the header (envelope) is written to the
socket, our peer learns data_len and sets itself to expect at least
data_len bytes to follow front or front+middle. If ceph_msg_revoke()
is called while the messenger is sending message's data portion,
anything we send after that call is counted by the OSD towards the now
revoked message's data portion. The effects vary, the most common one
is the eventual hang - higher layers get stuck waiting for the reply to
the message that was sent out after ceph_msg_revoke() returned and
treated by the OSD as a bunch of data bytes. This is what Matt ran
into.
(2) Flat out zeroing con->out_kvec_bytes worth of bytes to handle kvecs
is wrong. If ceph_msg_revoke() is called before the tag is sent out or
while the messenger is sending the header, we will get a connection
reset, either due to a bad tag (0 is not a valid tag) or a bad header
CRC, which kind of defeats the purpose of revoke. Currently the kernel
client refuses to work with header CRCs disabled, but that will likely
change in the future, making this even worse.
(3) con->out_skip is not reset on connection reset, leading to one or
more spurious connection resets if we happen to get a real one between
con->out_skip is set in ceph_msg_revoke() and before it's cleared in
write_partial_skip().
Fixing (1) and (3) is trivial. The idea behind fixing (2) is to never
zero the tag or the header, i.e. send out tag+header regardless of when
ceph_msg_revoke() is called. That way the header is always correct, no
unnecessary resets are induced and revoke stands ready for disabled
CRCs. Since ceph_msg_revoke() rips out con->out_msg, introduce a new
"message out temp" and copy the header into it before sending.
Yan, Zheng [Thu, 24 Dec 2015 00:44:20 +0000 (08:44 +0800)]
ceph: re-send AIO write request when getting -EOLDSNAP error
When receiving -EOLDSNAP from OSD, we need to re-send corresponding
write request. Due to locking issue, we can send new request inside
another OSD request's complete callback. So we use worker to re-send
request for AIO write.
Yan, Zheng [Wed, 23 Dec 2015 13:23:38 +0000 (21:23 +0800)]
ceph: Asynchronous IO support
The basic idea of AIO support is simple, just call kiocb::ki_complete()
in OSD request's complete callback. But there are several special cases.
when IO span multiple objects, we need to wait until all OSD requests
are complete, then call kiocb::ki_complete(). Error handling in this case
is tricky too. For simplify, AIO both span multiple objects and extends
i_size are not allowed.
Another special case is check EOF for reading (other client can write to
the file and extend i_size concurrently). For simplify, the direct-IO/AIO
code path does do the check, fallback to normal syn read instead.
Yaowei Bai [Tue, 17 Nov 2015 06:52:19 +0000 (14:52 +0800)]
ceph: ceph_frag_contains_value can be boolean
This patch makes ceph_frag_contains_value return bool to improve
readability due to this particular function only using either one or
zero as its return value.
Yaowei Bai [Tue, 17 Nov 2015 06:52:18 +0000 (14:52 +0800)]
ceph: remove unused functions in ceph_frag.h
These functions were introduced in commit 3d14c5d2b ("ceph: factor
out libceph from Ceph file system"). Howover, there's no user of
these functions since then, so remove them for simplicity.
Leon Romanovsky [Tue, 29 Dec 2015 15:01:30 +0000 (17:01 +0200)]
IB/mlx5: Unify CQ create flags check
The create_cq() can receive creation flags which were used
differently by two commits which added create_cq extended
command and cross-channel. The merged code caused to not
accept any flags at all.
This patch unifies the check into one function and one return
error code.
{IB, net}/mlx5: Move the modify QP operation table to mlx5_ib
When modifying a QP, the desired operation was determined in
the mlx5_core using a transition table that takes the current
state, the final state, and returns the desired operation.
Since this logic will be used for Raw Packet QP, move the
operation table to the mlx5_ib.
IB/mlx5: Support setting Ethernet priority for Raw Packet QPs
When the user changes the Address Vector(AV) in the modify QP, he
provides an SL. This SL should be translated to Ethernet Priority
by taking the 3 LSB bits, and modify the QP's TIS according to this
Ethernet priority.
Since Raw Packet QP is composed of RQ and SQ, the IB QP's
state is derived from the sub-objects. Therefore we need
to query each one of the sub-objects, and decide on the
IB QP's state.
IB/mlx5: Add create and destroy functionality for Raw Packet QP
This patch adds support for Raw Packet QP for the mlx5 device.
Raw Packet QP, unlike other QP types, has no matching mlx5_core_qp
object but rather it is built of RQ/SQ/TIR/TIS/TD mlx5_core object.
Since the SQ and RQ work-queue (WQ) buffers are not contiguous like
other QPs, we allocate separate buffers in the user-space and pass
the address of each one of them separately to the kernel.
IB/mlx5: Refactor mlx5_ib_qp to accommodate other QP types
Extract specific IB QP fields to mlx5_ib_qp_trans structure.
The mlx5_core QP object resides in mlx5_ib_qp_base, which all QP types
inherit from. When we need to find mlx5_ib_qp using mlx5_core QP
(event handling and co), we use a pointer that resides in
mlx5_ib_qp_base.
In addition, we delete all redundant fields that weren't used anywhere
in the code:
-doorbell_qpn
-sq_max_wqes_per_wr
-sq_spare_wqes
IB/mlx5: Allocate a Transport Domain for each ucontext
Transport Domain groups several TIS and TIR object. By grouping
these object, it defines wheather local loopback packets that
are sent from the TIS objects in the group are received by the
TIR objects in the same group.
Allocate a Transport Domain(TD) for each user context to be used
in the future by Raw Packet QP for Self-Loopback Control.
RQ/SQ will be used to implement IB verbs QPs, so the IB QP affiliated
events are affiliated also with SQs and RQs.
Since SQ, RQ and QP resource numbers do not share the same name
space, a queue type field was added to the event data to specify
the SW object that the event is affiliated with.
Per user context, work with CQE version that both the user-space
and the kernel support. Report this CQE version via the response of
the alloc_ucontext command.
Kaike Wan [Thu, 21 Jan 2016 13:41:31 +0000 (08:41 -0500)]
IB/sa: Fix netlink local service GFP crash
The rdma netlink local service registers a handler to handle RESOLVE
response and another handler to handle SET_TIMEOUT request. The first
thing these handlers do is to call netlink_capable() to check the
access right of the received skb to make sure that the sender has root
access. Under normal conditions, such responses and requests will be
directly forwarded to the handlers without going through the netlink_dump
pathway (see ibnl_rcv_msg() in drivers/infiniband/core/netlink.c).
However, a user application could send a RESOLVE request (not response)
to the local service, which will fall into the netlink_dump pathway,
where a new skb will be created without initializing the control block.
This new skb will be eventually forwarded to the local service RESOLVE
response handler. Unfortunately, netlink_capable() will cause general
protection fault if the skb's control block is not initialized. This
patch will address the problem by checking the skb first.
Takashi Iwai [Thu, 21 Jan 2016 16:43:08 +0000 (17:43 +0100)]
ALSA: timer: Introduce disconnect op to snd_timer_instance
Instead of the previous ugly hack, introduce a new op, disconnect, to
snd_timer_instance object for handling the wake up of pending tasks
more cleanly.
Takashi Iwai [Thu, 21 Jan 2016 16:19:31 +0000 (17:19 +0100)]
ALSA: timer: Handle disconnection more safely
Currently ALSA timer device doesn't take the disconnection into
account very well; it merely unlinks the timer device at disconnection
callback but does nothing else. Because of this, when an application
accessing the timer device is disconnected, it may release the
resource before actually closed. In most cases, it results in a
warning message indicating a leftover timer instance like:
ALSA: timer xxxx is busy?
But basically this is an open race.
This patch tries to address it. The strategy is like other ALSA
devices: namely,
- Manage card's refcount at each open/close
- Wake up the pending tasks at disconnection
- Check the shutdown flag appropriately at each possible call
Note that this patch has one ugly hack to handle the wakeup of pending
tasks. It'd be cleaner to introduce a new disconnect op to
snd_timer_instance ops. But since it would lead to internal ABI
breakage and it eventually increase my own work when backporting to
stable kernels, I took a different path to implement locally in
timer.c. A cleanup patch will follow at next for 4.5 kernel.
Thierry Reding [Thu, 21 Jan 2016 14:04:59 +0000 (15:04 +0100)]
pwm: Mark all devices as "might sleep"
Commit d1cd21427747 ("pwm: Set enable state properly on failed call to
enable") introduced a mutex that is needed to protect internal state of
PWM devices. Since that mutex is acquired in pwm_set_polarity() and in
pwm_enable() and might potentially block, all PWM devices effectively
become "might sleep".
It's rather pointless to keep the .can_sleep field around, but given
that there are external users let's postpone the removal for the next
release cycle.
Linus Walleij [Thu, 21 Jan 2016 12:04:47 +0000 (13:04 +0100)]
ARM: realview: fix device tree build
As it happens, two obj-$(CONFIG_FOO) += foo.o variables are
above obj-y := core.o, which doesn't work: the += directives
need to add something to the build and doesn't work if obj-y
is not set first, so move the obj-y to be on top and everything
builds nicely again.
Linus Torvalds [Thu, 21 Jan 2016 03:06:49 +0000 (19:06 -0800)]
Merge tag 'pm+acpi-4.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management and ACPI updates from Rafael Wysocki:
"This includes fixes on top of the previous batch of PM+ACPI updates
and some new material as well.
From the new material perspective the most significant are the driver
core changes that should allow USB devices to stay suspended over
system suspend/resume cycles if they have been runtime-suspended
already beforehand. Apart from that, ACPICA is updated to upstream
revision 20160108 (cosmetic mostly, but including one fixup on top of
the previous ACPICA update) and there are some devfreq updates the
didn't make it before (due to timing).
A few recent regressions are fixed, most importantly in the cpuidle
menu governor and in the ACPI backlight driver and some x86 platform
drivers depending on it.
Some more bugs are fixed and cleanups are made on top of that.
Specifics:
- Modify the driver core and the USB subsystem to allow USB devices
to stay suspended over system suspend/resume cycles if they have
been runtime-suspended already beforehand and fix some bugs on top
of these changes (Tomeu Vizoso, Rafael Wysocki).
- Update ACPICA to upstream revision 20160108, including updates of
the ACPICA's copyright notices, a code fixup resulting from a
regression fix that was necessary in the upstream code only (the
regression fixed by it has never been present in Linux) and a
compiler warning fix (Bob Moore, Lv Zheng).
- Fix a recent regression in the cpuidle menu governor that broke it
on practically all architectures other than x86 and make a couple
of optimizations on top of that fix (Rafael Wysocki).
- Clean up the selection of cpuidle governors depending on whether or
not the kernel is configured for tickless systems (Jean Delvare).
- Revert a recent commit that introduced a regression in the ACPI
backlight driver, address the problem it attempted to fix in a
different way and revert one more cosmetic change depending on the
problematic commit (Hans de Goede).
- Add two more ACPI backlight quirks (Hans de Goede).
- Fix a few minor problems in the core devfreq code, clean it up a
bit and update the MAINTAINERS information related to it (Chanwoo
Choi, MyungJoo Ham).
- Improve an error message in the ACPI fan driver (Andy Lutomirski).
- Fix a recent build regression in the cpupower tool (Shreyas
Prabhu)"
* tag 'pm+acpi-4.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
cpuidle: menu: Avoid pointless checks in menu_select()
sched / idle: Drop default_idle_call() fallback from call_cpuidle()
cpupower: Fix build error in cpufreq-info
cpuidle: Don't enable all governors by default
cpuidle: Default to ladder governor on ticking systems
time: nohz: Expose tick_nohz_enabled
ACPICA: Update version to 20160108
ACPICA: Silence a -Wbad-function-cast warning when acpi_uintptr_t is 'uintptr_t'
ACPICA: Additional 2016 copyright changes
ACPICA: Reduce regression fix divergence from upstream ACPICA
ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Satellite R830
ACPI / video: Revert "thinkpad_acpi: Use acpi_video_handles_brightness_key_presses()"
ACPI / video: Document acpi_video_handles_brightness_key_presses() a bit
ACPI / video: Fix using an uninitialized mutex / list_head in acpi_video_handles_brightness_key_presses()
ACPI / video: Revert "ACPI / video: driver must be registered before checking for keypresses"
ACPI / fan: Improve acpi_device_update_power error message
ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Portege R700
cpuidle: menu: Fix menu_select() for CPUIDLE_DRIVER_STATE_START == 0
MAINTAINERS: Add devfreq-event entry
MAINTAINERS: Add missing git repository and directory for devfreq
...
Linus Torvalds [Thu, 21 Jan 2016 03:00:46 +0000 (19:00 -0800)]
Merge tag 'renesas-sh-drivers-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas
Pull SH driver updates from Simon Horman:
"Clean up the clock API on legacy SH to make it more similar to the
Common Clock Framework. This will avoid different behaviour in
drivers shared between legacy and CCF-based platforms (e.g. SCIF)"
* tag 'renesas-sh-drivers-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
drivers: sh: clk: Avoid crashes when passing NULL clocks
drivers: sh: clk: Remove obsolete and unused clk_round_parent()
Linus Torvalds [Thu, 21 Jan 2016 02:42:30 +0000 (18:42 -0800)]
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"Driver updates for ARM SoCs. Some for SoC-family code under
drivers/soc, but also some other driver updates that don't belong
anywhere else. We also bring in the drivers/reset code through
arm-soc.
Some of the larger updates:
- Qualcomm support for SMEM, SMSM, SMP2P. All used to communicate
with other parts of the chip/board on these platforms, all
proprietary protocols that don't fit into other subsystems and live
in drivers/soc for now.
- System bus driver for UniPhier
- Driver for the TI Wakeup M3 IPC device
- Power management for Raspberry PI
+ Again a bunch of other smaller updates and patches"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits)
bus: uniphier: allow only built-in driver
ARM: bcm2835: clarify RASPBERRYPI_FIRMWARE dependency
MAINTAINERS: Drop Kumar Gala from QCOM
bus: uniphier-system-bus: add UniPhier System Bus driver
ARM: bcm2835: add rpi power domain driver
dt-bindings: add rpi power domain driver bindings
ARM: bcm2835: Define two new packets from the latest firmware.
drivers/soc: make mediatek/mtk-scpsys.c explicitly non-modular
soc: mediatek: SCPSYS: Add regulator support
MAINTAINERS: Change QCOM entries
soc: qcom: smd-rpm: Add existing platform support
memory/tegra: Add number of TLB lines for Tegra124
reset: hi6220: fix modular build
soc: qcom: Introduce WCNSS_CTRL SMD client
ARM: qcom: select ARM_CPU_SUSPEND for power management
MAINTAINERS: Add rules for Qualcomm dts files
soc: qcom: enable smsm/smp2p modular build
serial: msm_serial: Make config tristate
soc: qcom: smp2p: Qualcomm Shared Memory Point to Point
soc: qcom: smsm: Add driver for Qualcomm SMSM
...
Linus Torvalds [Thu, 21 Jan 2016 02:35:00 +0000 (18:35 -0800)]
Merge tag 'armsoc-defconfig64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM 64-bit defconfig updates from Olof Johansson:
"As mentioned earlier, we usually bake this into the general "arm64"
branch, but this release we have partitioned up the updates a bit
more.
Most of these updates are enabling new SoCs in the single defconfig
for 64-bit, Renesas R8A7795, a number of Tegra options, Socionext
Uniphier and a handful of new options for other platforms as well"
* tag 'armsoc-defconfig64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: mediatek: enable MTK_TIMER
arm64: defconfig: add CS2000 support
arm64: defconfig: Add Renesas R-Car SATA driver for R-Car Gen3 SoCs
arm64: defconfig: enable UniPhier SoCs support
arm64: add Kconfig entry for Socionext UniPhier SoC family
arm64: defconfig: add Renesas sound and AK4613 support
arm64: defconfig: add Renesas R-Car DMAC driver support
arm64: defconfig: Enable Renesas R-Car I2C Controller
arm64: defconfig: enable EthernetAVB
arm64: defconfig: Enable GPIO of Renesas R-Car Gen3 SoC
arm64: berlin: add the pinctrl dependency for Marvell Berlin SoCs
arm64: defconfig: renesas: Enable Renesas r8a7795 SoC
arm64: defconfig: Enable printk timestamps
arm64: defconfig: Enable squashfs support
arm64: defconfig: Enable sdhci-tegra driver
arm64: defconfig: Enable serial-tegra driver
arm64: defconfig: Enable tegra-apbdma driver
arm64: defconfig: Do not disable Tegra AHB driver
arm64: defconfig: Enable Tegra210 support
Linus Torvalds [Thu, 21 Jan 2016 02:29:13 +0000 (18:29 -0800)]
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Olof Johansson:
"As usual, a bunch of commits, mostly adding drivers and other options
to defconfigs because it makes sense to have them enabled on various
development or product boards. Too much to enumerate each here.
There's an introduction of a pxa_defconfig, since PXA finally will
allow building a shared kernel for all boards. With this, we can
hopefully remove a bunch of individual defconfigs down the road but it
requires a bit of real life testing and transition period"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (65 commits)
ARM: Add CONFIG_DEPRECATED_PARAM_STRUCT to netwinder_defconfig
ARM: multi_v7_defconfig: Add rockchip audio support
arm: multi_v7_defconfig: Add virtio drivers
ARM: zx_defconfig: remove CONFIG_MMC_DW_IDMAC
ARM: versatile: enable the right LEDs
ARM: pxa: add defconfig covering all the boards
ARM: versatile: select some defaults in defconfig
ARM: multi_v7_defconfig: Enable fan, sensors and audio for Odroid XU3
ARM: bcm2835: enable auxiliary spi driver in defconfig
ARM: bcm2835: enable all bcm2835-relevant in defconfig
ARM: default to multi_v7_defconfig
ARM: multi_v7_defconfig: enable rk808 clkout module
ARM: multi_v7_defconfig: enable rockchip crypto module
ARM: multi_v7_defconfig: enable Rockchip io-domain driver
ARM: multi_v7_defconfig: Enable generic SoC internal OMAP regulators
ARM: multi_v7_defconfig: Enable AM437x PMIC TPS65218
ARM: multi_v7_defconfig: enable TPS65217 regulator
ARM: realview: select apropriate targets
ARM: defconfig: qcom: Enable SSBI drivers
ARM: defconfig: Update qcom_defconfig
...
Linus Torvalds [Thu, 21 Jan 2016 02:21:32 +0000 (18:21 -0800)]
Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM 64-bit DT updates from Olof Johansson:
"This is the first release where we split up the 64-bit contributions a
bit more, and in particular we are having a separate DT branch for
them.
Contents:
- New devices added to Broadcom NorthStar2
- Misc fixes for Exynos7 boards
- QCOM updates for MSM8916
- Rockchip tweaks for rk3368 SoC and eval board
- A series of fixes for APM X-Gene v1 and v2
- Renesas R8A7795 CPU/PSCI additions
- Marvell Berlin4CT PSCI, cpuidle, watchdog portions
- Freescale LS1043a SoC and dev board support
+ some treewide or other misc changes"
* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (104 commits)
dts/ls2080a: Update DTSI to add support of SP805 WDT
Documentation: DT: Add entry for ARM SP805-WDT
arm64: dts: X-Gene v2: I2C1 clock is always on
arm64: dts: X-Gene v1: I2C0 clock is always on
arm64: dts: Fix to use standard DT node names for X-Gene 1 and X-Gene 2 platforms
arm64: dts: hikey: add label properties to UARTs
arm64: dts: apq8016-sbc: add label properties for UART, I2C, and SPI
arm64: dts: apq8016-sbc: enable UART0 on LS connector
arm64: dts: juno: Add idle-states to device tree
arm64: dts: Added syscon-reboot node for FSL's LS2080A SoC
arm64: dts: add LS1043a-RDB board support
arm64: dts: add Freescale LS1043a SoC support
Documentation: DT: Add entry for Freescale LS1043a-RDB board
arm64: dts: uniphier: add PH1-LD10 SoC/board support
arm64: renesas: r8a7795: fix SATA clock assignment
arm64: dts: salvator-x: Enable SATA controller
arm64: dts: r8a7795: Add SATA controller node
arm64: renesas: r8a7795: add internal delay for i2c IPs
arm64: renesas: salvator-x: Add board part number to DT bindings
arm64: dts: r8a7795: Add pmu device nodes
...
Linus Torvalds [Thu, 21 Jan 2016 02:16:29 +0000 (18:16 -0800)]
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM DT updates from Olof Johansson:
"As usual, the bulk of this release is again DT file contents.
There's a huge number of changes here, and it's challenging to give a
crisp overview of just what is in here. To start with:
New boards:
- TI-based DM3730 from LogicPD (Torpedo)
- Cosmic+ M4 (nommu) initial support (Freescale Vybrid)
- Raspberry Pi 2 DT files
- Watchdog on Meson8b
- Veyron-mickey (ASUS Chromebit) DTS
- Rockchip rk3228 SoC and eval board
- Sigma Designs Tango4
Improvements:
- Improved support for Qualcomm APQ8084, including Sony Xperia Z DT files
- Misc new devices for Rockchip rk3036 and rk3288
- Allwinner updates for misc SoCs and systems
... and a _large_ number of other changes across the field. Devices
added to SoC DTSI and board DTS files for a number of SoC vendors, new
product boards on already-supported SoCs, cleanups and refactorings of
existing DTS/DTSI files and a bunch of other changes"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (469 commits)
ARM: dts: compulab: add new board description
ARM: versatile: add the syscon LEDs to the DT
dts: vt8500: Fix errors in SDHC node for WM8505
ARM: dts: imx6q: clean up unused ipu2grp
ARM: dts: silk: Add compatible property to "partitions" node
ARM: dts: gose: Add compatible property to "partitions" node
ARM: dts: porter: Add compatible property to "partitions" node
ARM: dts: koelsch: Add compatible property to "partitions" node
ARM: dts: lager: Add compatible property to "partitions" node
ARM: dts: bockw: Add compatible property to "partitions" node
ARM: dts: meson8b: Add watchdog node
Documentation: watchdog: Add new bindings for meson8b
ARM: meson: Add status LED for Odroid-C1
ARM: dts: uniphier: fix a typo in comment block
ARM: bcm2835: Add the auxiliary clocks to the device tree.
ARM: bcm2835: Add devicetree for bcm2836 and Raspberry Pi 2 B
ARM: bcm2835: Move the CPU/peripheral include out of common RPi DT.
ARM: bcm2835: Split the DT for peripherals from the DT for the CPU
ARM: realview: set up cache correctly on the PB11MPCore
ARM: dts: Unify G2D device node with other devices on exynos4
...
Linus Torvalds [Thu, 21 Jan 2016 02:10:05 +0000 (18:10 -0800)]
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Olof Johansson:
"Updates for new platform support:
- New platform: Tango4 from Sigma Designs.
- Broadcom BCM2836 (Raspberry Pi 2 SoC)
- Enable cpufreq on Freescale i.MX7D
- Rockchip: SMP support for rk3036, general support for rk3228
- SMP support on Broadcom Kona and NSP
- Cleanups for OMAP removing legacy IOMMU data
+ a bunch of misc fixes and tweaks for various platforms"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (46 commits)
ARM: tango: Fix UP build issues
ARM: tango: pass ARM arch level for smc.S
ARM: bcm2835: Add Kconfig support for bcm2836
ARM: OMAP2+: Add support for dm814x and dra62x usb
ARM: OMAP2+: Add mmc hwmod entries for dm814x
ARM: OMAP2+: Update 81xx clock and power domains for default, active and sgx
ARM: OMAP2+: Fix SoC detection for dra62x j5-eco
ARM: tango4: Initial platform support
ARM: bcm2835: Add a compat string for bcm2836 machine probe
dt-bindings: Add root properties for Raspberry Pi 2
ARM: imx: select SRC for i.MX7
ARM: uniphier: select PINCTRL
ARM: OMAP2+: Remove device creation for omap-pcm-audio
ARM: OMAP1: Remove device creation for omap-pcm-audio
ARM: rockchip: enable support for RK3228 SoCs
ARM: rockchip: use const and __initconst for rk3036 smp_operations
ARM: zynq: Select ARCH_HAS_RESET_CONTROLLER
ARM: BCM: Add SMP support for Broadcom 4708
ARM: BCM: Add SMP support for Broadcom NSP
ARM: BCM: Clean up SMP support for Broadcom Kona
...
Linus Torvalds [Thu, 21 Jan 2016 02:03:56 +0000 (18:03 -0800)]
Merge tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC multiplatform code updates from Arnd Bergmann:
"This branch is the culmination of 5 years of effort to bring the ARMv6
and ARMv7 platforms together such that they can all be enabled and
boot the same kernel. It has been a tremendous amount of cleanup and
refactoring by a huge number of people, and creation of several new
(and major) subsystems to better abstract out all the platform details
in an appropriate manner.
The bulk of this branch is a large patchset from Arnd that brings
several of the more minor and older platforms we have closer to
multiplatform support. Among these are MMP, S3C64xx, Orion5x, mv78xx0
and realview Much of this is moving around header files from old mach
directories, but there are also some cleanup patches of debug_ll
(lowlevel debug per-platform options) and other parts.
Linus Walleij also has some patchs to clean up the older ARM Realview
platforms by finally introducing DT support, and Rob Herring has some
for ARM Versatile which is now DT-only. Both of these platforms are
now multiplatform.
Finally, a couple of patches from Russell for Dove PMU, and a fix from
Valentin Rothberg for Exynos ADC, which were rebased on top of the
series to avoid conflicts"
* tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits)
ARM: realview: don't select SMP_ON_UP for UP builds
ARM: s3c: simplify s3c_irqwake_{e,}intallow definition
ARM: s3c64xx: fix pm-debug compilation
iio: exynos-adc: fix irqf_oneshot.cocci warnings
ARM: realview: build realview-dt SMP support only when used
ARM: realview: select apropriate targets
ARM: realview: clean up header files
ARM: realview: make all header files local
ARM: no longer make CPU targets visible separately
ARM: integrator: use explicit core module options
ARM: realview: enable multiplatform
ARM: make default platform work for NOMMU
ARM: debug-ll: move DEBUG_LL_UART_EFM32 to correct Kconfig location
ARM: defconfig: use correct debug_ll settings
ARM: versatile: convert to multi-platform
ARM: versatile: merge mach code into a single file
ARM: versatile: switch to DT only booting and remove legacy code
ARM: versatile: add DT based PCI detection
ARM: pxa: mark ezx structures as __maybe_unused
ARM: pxa: mark raumfeld init functions as __maybe_unused
...
Linus Torvalds [Thu, 21 Jan 2016 01:55:20 +0000 (17:55 -0800)]
Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Olof Johansson:
"A smallish number of general cleanup commits this release cycle. Some
of these are minor tweaks:
- shmobile change of binding for their GIC (using arm,pl390 now)
- ARCH_RENESAS introduction
- Misc other renesas updates
There's also a couple of treewide commits from Masahiro Yamada
cleaning up const/__initconst for SMP operation structs and a switch
to using "depends on" instead of if-constructs on most of the Kconfig
platform targets"
* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
staging: board: armadillo800eva: Use "arm,pl390"
staging: board: kzm9d: Use "arm,pl390"
ARM: shmobile: r8a7778 dtsi: Use "arm,pl390" for GIC
ARM: shmobile: emev2 dtsi: Use "arm,pl390" for GIC
ARM: shmobile: r8a7740 dtsi: Use "arm,pl390" for GIC
ARM: shmobile: r7s72100 dtsi: Use "arm,pl390" for GIC
ARM: use "depends on" for SoC configs instead of "if" after prompt
ARM/clocksource: use automatic DT probing for ux500 PRCMU
ARM: use const and __initconst for smp_operations
ARM: hisi: do not export smp_operations structures
ARM: mvebu: remove unused mach/gpio.h
ARM: shmobile: Remove legacy mach/irqs.h
ARM: shmobile: Introduce ARCH_RENESAS
MAINTAINERS: Remove link to oss.renesas.com which is closed
Linus Torvalds [Thu, 21 Jan 2016 01:44:16 +0000 (17:44 -0800)]
Merge tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull non-urgent ARM SoC fixes from Olof Johansson:
"As usual, we queue up a few fixes that don't seem urgent enough to go
in through -rc.
- MAINTAINERS updates to add a list for brcmstb and fix a typo
- A handful of fixes for OMAP 81xx, a recently resurrected platform
so these can't be considered real regressions and thus got queued.
- A couple of other small fixes for scoop, sa1100 and davinci"
* tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: OMAP2+: Fix randconfig build warning for dm814_pllss_data
ARM: sa1100/simpad: Be sure to clamp return value
ARM: scoop: Be sure to clamp return value
ARM: davinci: fix a problematic usage of WARN()
ARM: davinci: only select WT cache if cache is enabled
ARM: OMAP2+: Remove useless check for legacy booting for dm814x
ARM: OMAP2+: Enable GPIO for dm814x
ARM: dts: Fix dm814x pinctrl address and mask
ARM: dts: Fix dm8148 control modules ranges
ARM: OMAP2+: Fix timer entries for dm814x
ARM: dts: Fix some mux and divider clocks to get dm814x-evm booting
ARM: OMAP2+: Add DPPLS clock manager for dm814x
clk: ti: Add few dm814x clock aliases
ARM: dts: Fix dm814x entries for pllss and prcm
MAINTAINERS: gpio-brcmstb: Remove stray '>'
MAINTAINERS: brcmstb: Include Broadcom internal mailing-list
Linus Torvalds [Thu, 21 Jan 2016 01:30:20 +0000 (17:30 -0800)]
Merge tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"The asm-generic tree this time contains one series from Nicolas Pitre
that makes the optimized do_div() implementation from the ARM
architecture available to all architectures.
This also adds stricter type checking for callers of do_div, which has
uncovered a number of bugs in existing code, and fixes up the ones we
have found"
* tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
ARM: asm/div64.h: adjust to generic codde
__div64_32(): make it overridable at compile time
__div64_const32(): abstract out the actual 128-bit cross product code
do_div(): generic optimization for constant divisor on 32-bit machines
div64.h: optimize do_div() for power-of-two constant divisors
mtd/sm_ftl.c: fix wrong do_div() usage
drm/mgag200/mgag200_mode.c: fix wrong do_div() usage
hid-sensor-hub.c: fix wrong do_div() usage
ti/fapll: fix wrong do_div() usage
ti/clkt_dpll: fix wrong do_div() usage
tegra/clk-divider: fix wrong do_div() usage
imx/clk-pllv2: fix wrong do_div() usage
imx/clk-pllv1: fix wrong do_div() usage
nouveau/nvkm/subdev/clk/gk20a.c: fix wrong do_div() usage
Linus Torvalds [Thu, 21 Jan 2016 01:20:53 +0000 (17:20 -0800)]
Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull SCSI target updates from Nicholas Bellinger:
"The highlights this round include:
- Introduce configfs support for unlocked configfs_depend_item()
(krzysztof + andrezej)
- Conversion of usb-gadget target driver to new function registration
interface (andrzej + sebastian)
- Enable qla2xxx FC target mode support for Extended Logins (himansu +
giridhar)
- Enable qla2xxx FC target mode support for Exchange Offload (himansu +
giridhar)
- Add qla2xxx FC target mode irq affinity notification + selective
command queuing. (quinn + himanshu)
- Fix iscsi-target deadlock in se_node_acl configfs deletion (sagi +
nab)
- Convert se_node_acl configfs deletion + se_node_acl->queue_depth to
proper se_session->sess_kref + target_get_session() usage. (hch +
sagi + nab)
- Fix long-standing race between se_node_acl->acl_kref get and
get_initiator_node_acl() lookup. (hch + nab)
- Fix target/user block-size handling, and make sure netlink reaches
all network namespaces (sheng + andy)
Note there is an outstanding bug-fix series for remote I_T nexus port
TMR LUN_RESET has been posted and still being tested, and will likely
become post -rc1 material at this point"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (56 commits)
scsi: qla2xxxx: avoid type mismatch in comparison
target/user: Make sure netlink would reach all network namespaces
target: Obtain se_node_acl->acl_kref during get_initiator_node_acl
target: Convert ACL change queue_depth se_session reference usage
iscsi-target: Fix potential dead-lock during node acl delete
ib_srpt: Convert acl lookup to modern get_initiator_node_acl usage
tcm_fc: Convert acl lookup to modern get_initiator_node_acl usage
tcm_fc: Wait for command completion before freeing a session
target: Fix a memory leak in target_dev_lba_map_store()
target: Support aborting tasks with a 64-bit tag
usb/gadget: Remove set-but-not-used variables
target: Remove an unused variable
target: Fix indentation in target_core_configfs.c
target/user: Allow user to set block size before enabling device
iser-target: Fix non negative ERR_PTR isert_device_get usage
target/fcoe: Add tag support to tcm_fc
qla2xxx: Check for online flag instead of active reset when transmitting responses
qla2xxx: Set all queues to 4k
qla2xxx: Disable ZIO at start time.
qla2xxx: Move atioq to a different lock to reduce lock contention
...
Fengguang Wu [Wed, 20 Jan 2016 23:03:25 +0000 (15:03 -0800)]
MAINTAINERS: add/fix git URLs for various subsystems
Add/fix git URLs for various subsystems
Add git URL for at91
Add git URL for Rockchip
Add git URL for ARM64
Update git URL for ath6kl
Add git URL for backlight
Add git URL for chrome
Add git URL for cris
Add git URL for cryptodev
Update git URL for DLM
Add git URL for eCryptfs
Add git URL for ext4
Add git URL for hwspinlock
Add git URL for integrity
Add git URL for IPVS
Add git URL for nfsd
Add git URL for KVM/s390
Add git URL for kgdb
Add git URL for nvdimm
Add git URL for metag
Add git URL for wireless drivers
Add git URL for devicetree
Update git URL for PCMCIA
Update git URL for pstore
Update git URL for ath10k
Add git URL for hexagon
Add git URL for reset
Add git URL for s390
Fix tree format for SAMSUNG thermal
Add git URL for md
Add git URL for squashfs
Add git URL for swiotlb
Add git URL for xtensa
Fix tree format for TPM
Add git URL for UML
Add git URL for VFIO
Add git URL for vhost
Update git URL for XFS
Fix MIC maintainers entry
Johannes Weiner [Wed, 20 Jan 2016 23:03:16 +0000 (15:03 -0800)]
mm: memcontrol: do not uncharge old page in page cache replacement
Changing page->mem_cgroup of a live page is tricky and fragile. In
particular, the memcg writeback code relies on that mapping being stable
and users of mem_cgroup_replace_page() not overlapping with dirtyable
inodes.
Page cache replacement doesn't have to do that, though. Instead of being
clever and transferring the charge from the old page to the new,
force-charge the new page and leave the old page alone. A temporary
overcharge won't matter in practice, and the old page is going to be freed
shortly after this anyway. And this is not performance critical.
Vladimir Davydov [Wed, 20 Jan 2016 23:03:10 +0000 (15:03 -0800)]
mm: free swap cache aggressively if memcg swap is full
Swap cache pages are freed aggressively if swap is nearly full (>50%
currently), because otherwise we are likely to stop scanning anonymous
when we near the swap limit even if there is plenty of freeable swap cache
pages. We should follow the same trend in case of memory cgroup, which
has its own swap limit.
Vladimir Davydov [Wed, 20 Jan 2016 23:03:05 +0000 (15:03 -0800)]
swap.h: move memcg related stuff to the end of the file
The following patches will add more functions to the memcg section of
include/linux/swap.h. Some of them will need values defined below the
current location of the section. So let's move the section to the end of
the file. No functional changes intended.
Vladimir Davydov [Wed, 20 Jan 2016 23:03:02 +0000 (15:03 -0800)]
mm: memcontrol: replace mem_cgroup_lruvec_online with mem_cgroup_online
mem_cgroup_lruvec_online() takes lruvec, but it only needs memcg. Since
get_scan_count(), which is the only user of this function, now possesses
pointer to memcg, let's pass memcg directly to mem_cgroup_online() instead
of picking it out of lruvec and rename the function accordingly.
Vladimir Davydov [Wed, 20 Jan 2016 23:02:59 +0000 (15:02 -0800)]
mm: vmscan: pass memcg to get_scan_count()
memcg will come in handy in get_scan_count(). It can already be used for
getting swappiness immediately in get_scan_count() instead of passing it
around. The following patches will add more memcg-related values, which
will be used there.
Vladimir Davydov [Wed, 20 Jan 2016 23:02:56 +0000 (15:02 -0800)]
mm: memcontrol: charge swap to cgroup2
This patchset introduces swap accounting to cgroup2.
This patch (of 7):
In the legacy hierarchy we charge memsw, which is dubious, because:
- memsw.limit must be >= memory.limit, so it is impossible to limit
swap usage less than memory usage. Taking into account the fact that
the primary limiting mechanism in the unified hierarchy is
memory.high while memory.limit is either left unset or set to a very
large value, moving memsw.limit knob to the unified hierarchy would
effectively make it impossible to limit swap usage according to the
user preference.
- memsw.usage != memory.usage + swap.usage, because a page occupying
both swap entry and a swap cache page is charged only once to memsw
counter. As a result, it is possible to effectively eat up to
memory.limit of memory pages *and* memsw.limit of swap entries, which
looks unexpected.
That said, we should provide a different swap limiting mechanism for
cgroup2.
This patch adds mem_cgroup->swap counter, which charges the actual number
of swap entries used by a cgroup. It is only charged in the unified
hierarchy, while the legacy hierarchy memsw logic is left intact.
The swap usage can be monitored using new memory.swap.current file and
limited using memory.swap.max.
Note, to charge swap resource properly in the unified hierarchy, we have
to make swap_entry_free uncharge swap only when ->usage reaches zero, not
just ->count, i.e. when all references to a swap entry, including the one
taken by swap cache, are gone. This is necessary, because otherwise
swap-in could result in uncharging swap even if the page is still in swap
cache and hence still occupies a swap entry. At the same time, this
shouldn't break memsw counter logic, where a page is never charged twice
for using both memory and swap, because in case of legacy hierarchy we
uncharge swap on commit (see mem_cgroup_commit_charge).
Johannes Weiner [Wed, 20 Jan 2016 23:02:53 +0000 (15:02 -0800)]
mm: memcontrol: clean up alloc, online, offline, free functions
The creation and teardown of struct mem_cgroup is fairly messy and
that has attracted mistakes and subtle bugs before.
The main cause for this is that there is no clear model about what
needs to happen when, and that attracts more chaos. So create one:
1. mem_cgroup_alloc() should allocate struct mem_cgroup and its
auxiliary members and initialize work items, locks etc. so that the
object it returns is fully initialized and in a neutral state.
2. mem_cgroup_css_alloc() will use mem_cgroup_alloc() to obtain a new
memcg object and configure it and the system according to the role
of the new memory-controlled cgroup in the hierarchy.
3. mem_cgroup_css_online() is no longer needed to synchronize with
iterators, but it verifies css->id which isn't available earlier.
4. mem_cgroup_css_offline() implements stuff that needs to happen upon
the user-visible destruction of a cgroup, which includes stopping
all user interfacing as well as releasing certain structures when
continued memory consumption would be unexpected at that point.
5. mem_cgroup_css_free() prepares the system and the memcg object for
the object's disappearance, neutralizes its state, and then gives
it back to mem_cgroup_free().
6. mem_cgroup_free() releases struct mem_cgroup and auxiliary memory.
Johannes Weiner [Wed, 20 Jan 2016 23:02:47 +0000 (15:02 -0800)]
mm: memcontrol: rein in the CONFIG space madness
What CONFIG_INET and CONFIG_LEGACY_KMEM guard inside the memory
controller code is insignificant, having these conditionals is not
worth the complication and fragility that comes with them.
Vladimir Davydov [Wed, 20 Jan 2016 23:02:44 +0000 (15:02 -0800)]
net: drop tcp_memcontrol.c
tcp_memcontrol.c only contains legacy memory.tcp.kmem.* file definitions
and mem_cgroup->tcp_mem init/destroy stuff. This doesn't belong to
network subsys. Let's move it to memcontrol.c. This also allows us to
reuse generic code for handling legacy memcg files.
Vladimir Davydov [Wed, 20 Jan 2016 23:02:38 +0000 (15:02 -0800)]
mm: memcontrol: allow to disable kmem accounting for cgroup2
Kmem accounting might incur overhead that some users can't put up with.
Besides, the implementation is still considered unstable. So let's
provide a way to disable it for those users who aren't happy with it.
To disable kmem accounting for cgroup2, pass cgroup.memory=nokmem at
boot time.
Johannes Weiner [Wed, 20 Jan 2016 23:02:35 +0000 (15:02 -0800)]
mm: memcontrol: account "kmem" consumers in cgroup2 memory controller
The original cgroup memory controller has an extension to account slab
memory (and other "kernel memory" consumers) in a separate "kmem"
counter, once the user set an explicit limit on that "kmem" pool.
However, this includes various consumers whose sizes are directly linked
to userspace activity. Accounting them as an optional "kmem" extension
is problematic for several reasons:
1. It leaves the main memory interface with incomplete semantics. A
user who puts their workload into a cgroup and configures a memory
limit does not expect us to leave holes in the containment as big
as the dentry and inode cache, or the kernel stack pages.
2. If the limit set on this random historical subgroup of consumers is
reached, subsequent allocations will fail even when the main memory
pool available to the cgroup is not yet exhausted and/or has
reclaimable memory in it.
3. Calling it 'kernel memory' is misleading. The dentry and inode
caches are no more 'kernel' (or no less 'user') memory than the
page cache itself. Treating these consumers as different classes is
a historical implementation detail that should not leak to users.
So, in addition to page cache, anonymous memory, and network socket
memory, account the following memory consumers per default in the
cgroup2 memory controller:
- threadinfo
- task_struct
- task_delay_info
- pid
- cred
- mm_struct
- vm_area_struct and vm_region (nommu)
- anon_vma and anon_vma_chain
- signal_struct
- sighand_struct
- fs_struct
- files_struct
- fdtable and fdtable->full_fds_bits
- dentry and external_name
- inode for all filesystems.
This should give us reasonable memory isolation for most common
workloads out of the box.
projects / linux.git / log