Hans de Goede [Thu, 12 Dec 2019 20:48:28 +0000 (21:48 +0100)]
drm/i915: opregion: set opregion chpd value to indicate the driver handles hotplug
According to both the old acpi_igd_opregion_spec_0.pdf and the newer
skl_opregion_rev0p5.pdf opregion specification documents, if a driver
handles hotplug events itself, it should set the opregion CHPD field to
1 to indicate this and the firmware should respond to this by no longer
sending ACPI 0x00 notification events on e.g. lid-state changes.
Specifically skl_opregion_rev0p5.pdf states thid in the documentation of
the CHPD word: "Re-enumeration trigger logic in System BIOS MUST be
disabled for all the Operating Systems supporting Hot-Plug
(e.g., Windows* Longhorn and above)." Note the MUST in there.
We ignore these notifications, so this should not be a problem but many
recent DSTDs seem to all have the same copy-pasted bug in the GNOT() AML
function which is used to send these notifications. Windows likely does not
hit this bug as it presumably correcty sets CHPD to 1.
Notice that the condition for the If is always true I believe that the
|| like needs to be an &&, but there is nothing we can do about this and
in my own DSDT archive 55 of the 93 DSDTs have this issue.
When the if is true the notification gets send to the PCI root instead
of only to the GFX0 device. This causes Linux to re-enumerate PCI devices
whenever the LID opens / closes, leading to unexpected messages in dmesg:
Suspend through lid close:
[ 313.598199] intel_atomisp2_pm 0000:00:03.0: Refused to change power state, currently in D3
[ 313.664453] intel_atomisp2_pm 0000:00:03.0: Refused to change power state, currently in D3
[ 313.737982] pci_bus 0000:01: Allocating resources
[ 313.738036] pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 313.738051] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 313.738111] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0x91000000-0x911fffff 64bit pref]
[ 313.738128] pcieport 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
Resume:
[ 813.623894] pci 0000:00:03.0: [8086:22b8] type 00 class 0x048000
[ 813.623955] pci 0000:00:03.0: reg 0x10: [mem 0x00000000-0x003fffff]
[ 813.630477] pci 0000:00:03.0: BAR 0: assigned [mem 0x91c00000-0x91ffffff]
[ 854.579101] intel_atomisp2_pm 0000:00:03.0: Refused to change power state, currently in D3
And more importantly this re-enumeration races with suspend/resume causing
enumeration to not be complete when assert_isp_power_gated() from
drivers/gpu/drm/i915/display/intel_display_power.c runs. This causes
the !pci_dev_present(isp_ids) check in assert_isp_power_gated() to fail
making the condition for the WARN true, leading to:
[ 813.327886] ------------[ cut here ]------------
[ 813.327898] ISP not power gated
[ 813.328028] WARNING: CPU: 2 PID: 2317 at drivers/gpu/drm/i915/display/intel_display_power.c:4870 intel_display_print_error_state+0x2b98/0x3a80 [i915]
...
[ 813.328599] ---[ end trace f01e81b599596774 ]---
This commit fixes the unwanted ACPI notification on the PCI root device
by setting CHPD to 1, so that the broken if condition in the AML never
gets checked as notifications of type 0x00 are disabled altogether.
Ville Syrjälä [Fri, 13 Dec 2019 17:43:48 +0000 (19:43 +0200)]
drm/edid: Make sure the CEA mode arrays have the correct amount of modes
We depend on a specific relationship between the VIC number and the
index in the CEA mode arrays. Assert that the arrays have the expected
size to make sure we've not accidentally left holes in them.
v2: Pimp the BUILD_BUG_ON()s
v3: Fix typos (Manasi)
Ville Syrjälä [Fri, 13 Dec 2019 17:43:45 +0000 (19:43 +0200)]
drm/edid: Abstract away cea_edid_modes[]
We're going to need two cea mode tables (one for VICs < 128,
another one for VICs >= 193). To that end replace the direct
edid_cea_modes[] lookups with a function call. And we'll rename
the array to edid_cea_modes_0[] to indicate how it's to be
indexed.
v2: Fix typos (Tom)
Drop the pointless NULL checks in the loops (Tom)
Assign when declaring (Tom)
Improve the comment for cea_modes_*[] to indicate
that one should always use cea_mode_for_vic() (Tom)
Gerd Hoffmann [Thu, 12 Dec 2019 12:53:45 +0000 (13:53 +0100)]
drm/virtio: batch display update commands.
When the driver submits multiple commands in a row it makes sense to
notify the host only after submitting the last one, so the host can
process them all at once, with a single vmexit.
Add functions to enable/disable notifications to allow that. Use the
new functions for primary plane updates.
Hans de Goede [Mon, 18 Nov 2019 15:51:32 +0000 (16:51 +0100)]
drm/modes: parse_cmdline: Explicitly memset the passed in drm_cmdline_mode struct
Instead of only setting mode->specified on false on an early exit and
leaving e.g. mode->bpp_specified and mode->refresh_specified as is,
lets be consistent and just zero out the entire passed in struct at
the top of drm_mode_parse_command_line_for_connector()
Changes in v3:
-Drop "mode->specified = false;" line instead of the "return false;" (oops)
This crasher was reported-by: kernel test robot <[email protected]>
Hans de Goede [Mon, 18 Nov 2019 15:51:31 +0000 (16:51 +0100)]
drm/modes: parse_cmdline: Remove some unnecessary code (v2)
fb_get_options() will return fb_mode_option if no video=<connector-name>
argument is present on the kernel commandline, so there is no need to also
do this in drm_mode_parse_command_line_for_connector() as our only caller
uses fb_get_options() to get the mode_option argument.
Changes in v2:
-Split out the changes dealing with the initialization of the mode struct
into a separate patch
Hans de Goede [Mon, 18 Nov 2019 15:51:30 +0000 (16:51 +0100)]
drm/modes: parse_cmdline: Add support for specifying panel_orientation (v2)
Sometimes we want to override a connector's panel_orientation from the
kernel commandline. Either for testing and for special cases, e.g. a kiosk
like setup which uses a TV mounted in portrait mode.
Users can already specify a "rotate" option through a video= kernel cmdline
option. But that only supports 0/180 degrees (see drm_client_modeset TODO)
and only works for in kernel modeset clients, not for userspace kms users.
The "panel-orientation" connector property OTOH does support 90/270 degrees
as it leaves dealing with the rotation up to userspace and this does work
for userspace kms clients (at least those which support this property).
Changes in v2:
-Add missing ':' after @panel_orientation (reported by kbuild test robot)
Some options which can be specified on the commandline, such as
margin_right=..., margin_left=..., etc. are applied not only to the
specified mode, but to all modes. As such it would be nice if the user
can simply say e.g.
video=HDMI-1:margin_right=14,margin_left=24,margin_bottom=36,margin_top=42
This commit refactors drm_mode_parse_command_line_for_connector() to
add support for this, and as a nice side effect also cleans up the
function a bit.
Hans de Goede [Mon, 18 Nov 2019 15:51:28 +0000 (16:51 +0100)]
drm/modes: parse_cmdline: Set bpp/refresh_specified after successful parsing
drm_connector_get_cmdline_mode() calls
drm_mode_parse_command_line_for_connector() with &connector->cmdline_mode
as mode argument, so anything which we store in the mode arguments gets
kept even if we return false.
Avoid storing a possibly false-postive bpp/refresh_specified setting
in connector->cmdline_mode by moving the setting of these to after
successful parsing of the bpp/refresh parts of the video= argument.
Hans de Goede [Mon, 18 Nov 2019 15:51:25 +0000 (16:51 +0100)]
drm/modes: parse_cmdline: Accept extras directly after mode combined with options
Before this commit it was impossible to combine an extra mode argument
specified directly after the resolution with an option, e.g.
video=HDMI-1:720x480e,rotate=180 would not work, either the "e" to force
enable would need to be dropped or the ",rotate=180", otherwise the
mode_option would not be accepted.
This commit fixes this by setting parse_extras to true in this case, so
that drm_mode_parse_cmdline_res_mode() parses the extra arguments directly
after the resolution.
Hans de Goede [Mon, 18 Nov 2019 15:51:24 +0000 (16:51 +0100)]
drm/modes: parse_cmdline: Stop parsing extras after bpp / refresh at ', '
Before this commit it was impossible to add an extra mode argument after
a bpp or refresh specifier, combined with an option, e.g.
video=HDMI-1:720x480-24e,rotate=180 would not work, either the "e" to
force enable would need to be dropped or the ",rotate=180", otherwise
the mode_option would not be accepted.
This commit fixes this by fixing the length calculation if extras_ptr
is set to stop the extra parsing at the start of the options (stop at the
',' options_ptr points to).
Hans de Goede [Mon, 18 Nov 2019 15:51:22 +0000 (16:51 +0100)]
drm/modes: parse_cmdline: Fix possible reference past end of string
Before this commit, if the last option of a video=... option is for
example "rotate" without a "=<value>" after it then delim will point to
the terminating 0 of the string, and value which is sets to <delim + 1>
will point one position past the end of the string.
This commit fixes this by enforcing that the contents of delim equals '='
as it should be for options which take a value, this check is done in a
new drm_mode_parse_cmdline_int helper function which factors out the
common integer parsing code for all the options which take an int.
Heiko Stuebner [Mon, 9 Dec 2019 14:31:28 +0000 (15:31 +0100)]
drm/rockchip: add ability to handle external dphys in mipi-dsi
While the common case is that the dsi controller uses an internal dphy,
accessed through the phy registers inside the dsi controller, there is
also the possibility to use a separate dphy from a different vendor.
One such case is the Rockchip px30 that uses a Innosilicon Mipi dphy,
so add the support for handling such a constellation, including the pll
also getting generated inside that external phy.
changes in v5:
- rebased on top of 5.5-rc1
- merged with dsi timing change to prevent ordering conflicts
Some dw-mipi-dsi instances in Rockchip SoCs use external dphys.
In these cases the needs clock will also be generated externally
so these don't need the ref-clock as well.
changes in v5:
- rebased on top of 5.5-rc1
- merged with dsi timing change to prevent ordering conflicts
Heiko Stuebner [Mon, 9 Dec 2019 14:31:26 +0000 (15:31 +0100)]
drm/bridge/synopsys: dsi: move phy_ops callbacks around panel enablement
If implementation-specific phy_ops need to be defined they probably
should be enabled before trying to talk to the panel and disabled only
after the panel was disabled.
Right now they are enabled last and disabled first, so might make it
impossible to talk to some panels - example for this being the px30
with an external Innosilicon dphy that needs the phy to be enabled
to transfer commands to the panel.
So move the calls appropriately.
changed in v5:
- rebased on top of 5.5-rc1
- merged with dsi timing change to prevent ordering conflicts
Heiko Stuebner [Mon, 9 Dec 2019 14:31:25 +0000 (15:31 +0100)]
drm/bridge/synopsys: dsi: driver-specific configuration of phy timings
The timing values for dw-dsi are often dependent on the used display and
according to Philippe Cornu will most likely also depend on the used phy
technology in the soc-specific implementation.
To solve this and allow specific implementations to define them as needed
add a new get_timing callback to phy_ops and call this from the dphy_timing
function to retrieve the necessary values for the specific mode.
Right now this handles the hs2lp + lp2hs where Rockchip SoCs need handling
according to the phy speed, while STM seems to be ok with static values.
changes in v5:
- rebase on 5.5-rc1
- merge into px30 dsi series to prevent ordering conflicts
changes in v4:
- rebase to make it directly fit on top of drm-misc-next after all
changes in v3:
- check existence of phy_ops->get_timing in __dw_mipi_dsi_probe()
- emit actual error when get_timing() call fails
- add tags from Philippe and Yannick
changes in v2:
- add driver-specific handling, don't force all bridge users to use
the same timings, as suggested by Philippe
Remove obsolete bundled tfp410 driver with its "ti,tilcdc,tfp410"
devicetree binding. No platform has ever used this driver in the
mainline kernel and if anybody connects tfp410 to tilcdc he or she
should use the generic drm tfp410 bridge driver.
Linus Torvalds [Sun, 15 Dec 2019 22:58:13 +0000 (14:58 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Doug Ledford:
"A small collection of -rc fixes. Mostly. One API addition, but that's
because we wanted to use it in a fix. There's also a bug fix that is
going to render the 5.5 kernel's soft-RoCE driver incompatible with
all soft-RoCE versions prior, but it's required to actually implement
the protocol according to the RoCE spec and required in order for the
soft-RoCE driver to be able to successfully work with actual RoCE
hardware.
Summary:
- Update Steve Wise info
- Fix for soft-RoCE crc calculations (will break back compatibility,
but only with the soft-RoCE driver, which has had this bug since it
was introduced and it is an on-the-wire bug, but will make
soft-RoCE fully compatible with real RoCE hardware)
- cma init fixup
- counters oops fix
- fix for mlx4 init/teardown sequence
- fix for mkx5 steering rules
- introduce a cleanup API, which isn't a fix, but we want to use it
in the next fix
- fix for mlx5 memory management that uses API in previous patch"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/mlx5: Fix device memory flows
IB/core: Introduce rdma_user_mmap_entry_insert_range() API
IB/mlx5: Fix steering rule of drop and count
IB/mlx4: Follow mirror sequence of device add during device removal
RDMA/counter: Prevent auto-binding a QP which are not tracked with res
rxe: correctly calculate iCRC for unaligned payloads
Update mailmap info for Steve Wise
RDMA/cma: add missed unregister_pernet_subsys in init failure
Linus Torvalds [Sun, 15 Dec 2019 20:27:31 +0000 (12:27 -0800)]
Merge tag 'riscv/for-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"Two minor build fixes:
- Fix builds of the ELF loader when built with 'make -j1' (nommu
only)
- Fix CONFIG_SOC_SIFIVE builds when CONFIG_TTY is disabled (found
during randconfig testing)"
* tag 'riscv/for-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: only select serial sifive if TTY is enabled
riscv: Fix build dependency for loader
Linus Torvalds [Sun, 15 Dec 2019 20:24:44 +0000 (12:24 -0800)]
Merge tag 'for-linus-5.5b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Two fixes: one for a resource accounting bug in some configurations
and a fix for another patch which went into rc1"
* tag 'for-linus-5.5b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/balloon: fix ballooned page accounting without hotplug enabled
xen-blkback: prevent premature module unload
Linus Torvalds [Sun, 15 Dec 2019 19:36:12 +0000 (11:36 -0800)]
Merge branch 'remove-ksys-mount-dup' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux
Pull ksys_mount() and ksys_dup() removal from Dominik Brodowski:
"This small series replaces all in-kernel calls to the
userspace-focused ksys_mount() and ksys_dup() with calls to
kernel-centric functions:
For each replacement of ksys_mount() with do_mount(), one needs to
verify that the first and third parameter (char *dev_name, char *type)
are strings allocated in kernelspace and that the fifth parameter
(void *data) is either NULL or refers to a full page (only occurence
in init/do_mounts.c::do_mount_root()). The second and fourth
parameters (char *dir_name, unsigned long flags) are passed by
ksys_mount() to do_mount() unchanged, and therefore do not require
particular care.
Moreover, instead of pretending to be userspace, the opening of
/dev/console as stdin/stdout/stderr can be implemented using in-kernel
functions as well. Thereby, ksys_dup() can be removed for good"
[ This doesn't get rid of the special "kernel init runs with KERNEL_DS"
case, but it at least removes _some_ of the users of "treat kernel
pointers as user pointers for our magical init sequence".
One day we'll hopefully be rid of it all, and can initialize our
init_thread addr_limit to USER_DS. - Linus ]
* 'remove-ksys-mount-dup' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
fs: remove ksys_dup()
init: unify opening /dev/console as stdin/stdout/stderr
init: use do_mount() instead of ksys_mount()
initrd: use do_mount() instead of ksys_mount()
devtmpfs: use do_mount() instead of ksys_mount()
Linus Torvalds [Sat, 14 Dec 2019 20:51:57 +0000 (12:51 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"24 fixes, all in drivers. The lion's share (16) are qla2xxx and the
rest are iscsi (3), ufs (2), smarpqi, lpfc and libsas"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits)
scsi: iscsi: Avoid potential deadlock in iscsi_if_rx func
scsi: iscsi: Fix a potential deadlock in the timeout handler
scsi: smartpqi: Update attribute name to `driver_version`
scsi: libsas: stop discovering if oob mode is disconnected
scsi: ufs: Disable autohibern8 feature in Cadence UFS
scsi: iscsi: qla4xxx: fix double free in probe
scsi: ufs: Give an unique ID to each ufs-bsg
scsi: qla2xxx: Add debug dump of LOGO payload and ELS IOCB
scsi: qla2xxx: Ignore PORT UPDATE after N2N PLOGI
scsi: qla2xxx: Don't defer relogin unconditonally
scsi: qla2xxx: Send Notify ACK after N2N PLOGI
scsi: qla2xxx: Configure local loop for N2N target
scsi: qla2xxx: Fix PLOGI payload and ELS IOCB dump length
scsi: qla2xxx: Don't call qlt_async_event twice
scsi: qla2xxx: Allow PLOGI in target mode
scsi: qla2xxx: Change discovery state before PLOGI
scsi: qla2xxx: Drop superfluous INIT_WORK of del_work
scsi: qla2xxx: Initialize free_work before flushing it
scsi: qla2xxx: Use explicit LOGO in target mode
scsi: qla2xxx: Ignore NULL pointer in tcm_qla2xxx_free_mcmd
...
Linus Torvalds [Sat, 14 Dec 2019 20:49:20 +0000 (12:49 -0800)]
Merge tag 'char-misc-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are six small fixes for some reported char/misc driver issues:
- fix build warnings with new 'awk' with the raid6 code
- four interconnect driver bugfixes
- binder fix for reported problem
All of these except the binder fix have been in linux-next with no
reported issues. The binder fix is "new" but Todd says it is good as
he has tested it :)"
* tag 'char-misc-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
binder: fix incorrect calculation for num_valid
interconnect: qcom: msm8974: Walk the list safely on node removal
interconnect: qcom: qcs404: Walk the list safely on node removal
interconnect: qcom: sdm845: Walk the list safely on node removal
interconnect: qcom: Fix Kconfig indentation
lib: raid6: fix awk build warnings
Linus Torvalds [Sat, 14 Dec 2019 20:45:36 +0000 (12:45 -0800)]
Merge tag 'driver-core-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two small driver core fixes to resolve some reported issues
The first is to handle the much-reported (by the build systems)
problem that superH does not boot anymore.
The second handles an issue in the new platform logic that a number of
people ran into with the automated tests in kbuild
Both of these have been in linux-next with no reported issues"
* tag 'driver-core-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: Fix boot problem on SuperH
of/platform: Unconditionally pause/resume sync state during kernel init
Linus Torvalds [Sat, 14 Dec 2019 20:43:57 +0000 (12:43 -0800)]
Merge tag 'staging-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO fixes from Greg KH:
"Here are a number of small staging and IIO driver fixes for reported
issues for 5.5-rc2
Nothing major, a bunch of tiny IIO driver issues resolved, and some
staging driver fixes for things that people ran into with 5.5-rc1.
Full details are in the shortlog.
All of these have been in linux-next with no reported issues"
* tag 'staging-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (28 commits)
fbtft: Fix the initialization from property algorithm
staging: rtl8712: fix interface sanity check
staging: rtl8188eu: fix interface sanity check
staging: gigaset: add endpoint-type sanity check
staging: gigaset: fix illegal free on probe errors
staging: gigaset: fix general protection fault on probe
staging: vchiq: call unregister_chrdev_region() when driver registration fails
staging: exfat: fix multiple definition error of `rename_file'
staging/wlan-ng: add CRC32 dependency in Kconfig
staging: hp100: Fix build error without ETHERNET
staging: fbtft: Do not hardcode SPI CS polarity inversion
staging: exfat: properly support discard in clr_alloc_bitmap()
staging/octeon: Mark Ethernet driver as BROKEN
iio: adc: max9611: Fix too short conversion time delay
iio: ad7949: fix channels mixups
iio: imu: st_lsm6dsx: do not power-off accel if events are enabled
iio: imu: st_lsm6dsx: track hw FIFO buffering with fifo_mask
iio: imu: st_lsm6dsx: fix decimation factor estimation
iio: imu: inv_mpu6050: fix temperature reporting using bad unit
iio: humidity: hdc100x: fix IIO_HUMIDITYRELATIVE channel reporting
...
Linus Torvalds [Sat, 14 Dec 2019 20:40:39 +0000 (12:40 -0800)]
Merge tag 'usb-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for reported issues for 5.5-rc2
There's the usual gadget and xhci fixes, as well as some other
problems that syzbot has been finding during it's fuzzing runs. Full
details are in the shortlog.
All of these have been in linux-next with no reported issues"
* tag 'usb-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (21 commits)
usb: dwc3: pci: add ID for the Intel Comet Lake -H variant
xhci: make sure interrupts are restored to correct state
xhci: handle some XHCI_TRUST_TX_LENGTH quirks cases as default behaviour.
xhci: Increase STS_HALT timeout in xhci_suspend()
usb: xhci: only set D3hot for pci device
xhci: fix USB3 device initiated resume race with roothub autosuspend
xhci: Fix memory leak in xhci_add_in_port()
USB: Fix incorrect DMA allocations for local memory pool drivers
usb: gadget: fix wrong endpoint desc
usb: dwc3: ep0: Clear started flag on completion
usb: dwc3: gadget: Clear started flag for non-IOC
usb: dwc3: gadget: Fix logical condition
USB: atm: ueagle-atm: add missing endpoint check
USB: adutux: fix interface sanity check
USB: idmouse: fix interface sanity checks
USB: serial: io_edgeport: fix epic endpoint lookup
usb: mon: Fix a deadlock in usbmon between mmap and read
usb: common: usb-conn-gpio: Don't log an error on probe deferral
usb: core: urb: fix URB structure initialization function
usb: typec: fix use after free in typec_register_port()
...
Linus Torvalds [Sat, 14 Dec 2019 19:44:14 +0000 (11:44 -0800)]
Merge tag '5.5-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cfis fixes from Steve French:
"Three small smb3 fixes: this addresses two recent issues reported in
additional testing during rc1, a refcount underflow and a problem with
an intermittent crash in SMB2_open_init"
* tag '5.5-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
CIFS: Close cached root handle only if it has a lease
SMB3: Fix crash in SMB2_open_init due to uninitialized field in compounding path
smb3: fix refcount underflow warning on unmount when no directory leases
Linus Torvalds [Sat, 14 Dec 2019 19:13:54 +0000 (11:13 -0800)]
Merge tag 'ovl-fixes-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
"Fix some bugs and documentation"
* tag 'ovl-fixes-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
docs: filesystems: overlayfs: Fix restview warnings
docs: filesystems: overlayfs: Rename overlayfs.txt to .rst
ovl: relax WARN_ON() on rename to self
ovl: fix corner case of non-unique st_dev;st_ino
ovl: don't use a temp buf for encoding real fh
ovl: make sure that real fid is 32bit aligned in memory
ovl: fix lookup failure on multi lower squashfs
Paul Cercueil [Tue, 10 Dec 2019 14:41:42 +0000 (15:41 +0100)]
gpu/drm: ingenic: Add support for the JZ4770
The LCD controller in the JZ4770 supports up to 720p. While there has
been many new features added since the old JZ4740, which are not yet
handled here, this driver still works fine.
Paul Cercueil [Tue, 10 Dec 2019 14:41:40 +0000 (15:41 +0100)]
gpu/drm: ingenic: Set max FB height to 4095
While the LCD controller can effectively only support a maximum
resolution of 800x600, the framebuffer's height can be much higher,
since we can change the Y start offset.
Chris Wilson [Fri, 13 Dec 2019 22:31:40 +0000 (22:31 +0000)]
drm/i915/gem: Serialise object before changing cache-level
Wait for the object to be idle before changing its cache-level and
unbinding. This was dropped as supposedly superfluous from commit 8b1c78e06e61 ("drm/i915: Avoid calling i915_gem_object_unbind holding
object lock"), but it turns out to prevent some cache dirt escaping.
Smells like papering over a race...
Todd Kjos [Fri, 13 Dec 2019 20:25:31 +0000 (12:25 -0800)]
binder: fix incorrect calculation for num_valid
For BINDER_TYPE_PTR and BINDER_TYPE_FDA transactions, the
num_valid local was calculated incorrectly causing the
range check in binder_validate_ptr() to miss out-of-bounds
offsets.
Linus Walleij [Fri, 6 Dec 2019 09:43:01 +0000 (10:43 +0100)]
drm/gma500: Pass GPIO for Intel MID using descriptors
The GMA500 driver is using the legacy GPIO API to fetch
three optional display control GPIO lines from the SFI
description used by the Medfield platform.
Switch this over to use GPIO descriptors and delete the
custom platform data.
We create three new static locals in the tc35876x bridge
code but it is hardly any worse than the I2C client static
local already there: I tried first to move it to the DRM
driver state container but there are workarounds for
probe order in the code so I just stayed off it, as the
result is unpredictable.
People wanting to do a more throrugh and proper cleanup
of the GMA500 driver can work on top of this, I can't
solve much more since I don't have access to the hardware,
I can only attempt to tidy up my GPIO corner.
Linus Torvalds [Fri, 13 Dec 2019 22:58:24 +0000 (14:58 -0800)]
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"Some fixes and cleanup patches"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_balloon: divide/multiply instead of shifts
virtio_balloon: name cleanups
virtio-balloon: fix managed page counts when migrating pages between zones
Linus Torvalds [Fri, 13 Dec 2019 22:45:40 +0000 (14:45 -0800)]
Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- removal of an old API where all in-kernel users have been converted
as of this merge window.
- a kdoc fix
- a new helper that will make dependencies for the next API conversion
a tad easier
* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: add helper to check if a client has a driver attached
i2c: fix header file kernel-doc warning
i2c: remove i2c_new_dummy() API
Linus Torvalds [Fri, 13 Dec 2019 22:43:26 +0000 (14:43 -0800)]
Merge tag 'pm-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These add PM QoS support to devfreq and fix a few issues in that
subsystem, fix two cpuidle issues and do one minor cleanup in there,
and address an ACPI power management problem related to devices with
special power management requirements, like fans.
Specifics:
- Add PM QoS support, based on the frequency QoS introduced during
the 5.4 cycle, to devfreq (Leonard Crestez).
- Fix some assorted devfreq issues (Leonard Crestez).
- Fix an unintentional cpuidle behavior change (introduced during the
5.4 cycle) related to the active polling time limit (Marcelo
Tosatti).
- Fix a recently introduced cpuidle helper function and do a minor
cleanup in the cpuidle core (Rafael Wysocki).
- Avoid adding devices with special power management requirements,
like fans, to the generic ACPI PM domain (Rafael Wysocki)"
* tag 'pm-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: Drop unnecessary type cast in cpuidle_poll_time()
cpuidle: Fix cpuidle_driver_state_disabled()
ACPI: PM: Avoid attaching ACPI PM domain to certain devices
cpuidle: use first valid target residency as poll time
PM / devfreq: Use PM QoS for sysfs min/max_freq
PM / devfreq: Add PM QoS support
PM / devfreq: Don't fail devfreq_dev_release if not in list
PM / devfreq: Introduce get_freq_range helper
PM / devfreq: Set scaling_max_freq to max on OPP notifier error
PM / devfreq: Fix devfreq_notifier_call returning errno
Linus Torvalds [Fri, 13 Dec 2019 22:40:38 +0000 (14:40 -0800)]
Merge tag 'sound-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A small collection of fixes.
The main changes are fixes for a couple of regressions in AMD HD-audio
and FireWire that were introduced in 5.5-rc1. The rest are small fixes
for echoaudio and FireWire, as well as a usual Dell HD-audio fixup"
* tag 'sound-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek - Line-out jack doesn't work on a Dell AIO
ALSA: hda/hdmi - Fix duplicate unref of pci_dev
ALSA: fireface: fix return value in error path of isochronous resources reservation
ALSA: oxfw: fix return value in error path of isochronous resources reservation
ALSA: firewire-motu: fix double unlocked 'motu->mutex'
ALSA: echoaudio: simplify get_audio_levels
Linus Torvalds [Fri, 13 Dec 2019 22:36:45 +0000 (14:36 -0800)]
Merge tag 'drm-fixes-2019-12-13' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Usual round of rc2 fixes.
i915 and amdgpu leading the charge, but a few others in here,
including some nouveau fixes, all seems pretty for rc2, but hey it's a
Fri 13th pull so I'm sure it'll cause untold bad fortune.
i915:
- GPU hang on idle transition
- GLK+ FBC corruption fix
- non-priv OA access on Tigerlake
- HDCP state fix
- CI found race fixes
amdgpu:
- renoir DC fixes
- GFX8 fence flush alignment with userspace
- Arcturus power profile fix
- DC aux + i2c over aux fixes
- GPUVM invalidation semaphore fixes
- gfx10 golden registers update
mgag200:
- expand startadd fix
panfrost:
- devfreq fix
- memory fixes
mcde:
- DSI pointer deref fix"
* tag 'drm-fixes-2019-12-13' of git://anongit.freedesktop.org/drm/drm: (51 commits)
drm/amdgpu: add invalidate semaphore limit for SRIOV in gmc10
drm/amdgpu: add invalidate semaphore limit for SRIOV and picasso in gmc9
drm/amdgpu: avoid using invalidate semaphore for picasso
Revert "drm/amdgpu: dont schedule jobs while in reset"
drm/amdgpu: fix license on Kconfig and Makefiles
drm/amdgpu/gfx10: update gfx golden settings for navi14
drm/amdgpu/gfx10: update gfx golden settings
drm/amdgpu/gfx10: update gfx golden settings for navi14
drm/amdgpu/gfx10: update gfx golden settings
drm/i915: Serialise with remote retirement
drm/amd/display: include linux/slab.h where needed
drm/amd/display: fix undefined struct member reference
drm/nouveau/kms/nv50-: fix panel scaling
drm/nouveau/kms/nv50-: Limit MST BPC to 8
drm/nouveau/kms/nv50-: Store the bpc we're using in nv50_head_atom
drm/nouveau/kms/nv50-: Call outp_atomic_check_view() before handling PBN
drm/nouveau: Fix drm-core using atomic code-paths on pre-nv50 hardware
drm/nouveau: Move the declaration of struct nouveau_conn_atom up a bit
drm/i915/gt: Detect if we miss WaIdleLiteRestore
drm/i915/hdcp: Nuke intel_hdcp_transcoder_config()
...
Lucas De Marchi [Fri, 6 Dec 2019 19:05:52 +0000 (11:05 -0800)]
drm/i915/bios: remove extra debug messages
Just like in commit 523e0cc89b83 ("drm/i915/tgl: allow DVI/HDMI on port
A"), the port checks when reading the VBT can easily not match what the
platform really exposes. However here we only have some additional debug
messages that are not adding much value: in the previous debug message
we already print everything we know about the VBT.
Instead of keep fixing the possible port assignments according to the
platform, just nuke the additional messages.
Linus Torvalds [Fri, 13 Dec 2019 22:27:19 +0000 (14:27 -0800)]
Merge tag 'for-linus-20191212' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- stable fix for the bi_size overflow. Not a corruption issue, but a
case wher we could merge but disallowed (Andreas)
- NVMe pull request via Keith, with various fixes.
- MD pull request from Song.
- Merge window regression fix for the rq passthrough stats (Logan)
- Remove unused blkcg_drain_queue() function (Guoqing)
* tag 'for-linus-20191212' of git://git.kernel.dk/linux-block:
blk-cgroup: remove blkcg_drain_queue
block: fix NULL pointer dereference in account statistics with IDE
md: make sure desc_nr less than MD_SB_DISKS
md: raid1: check rdev before reference in raid1_sync_request func
raid5: need to set STRIPE_HANDLE for batch head
block: fix "check bi_size overflow before merge"
nvme/pci: Fix read queue count
nvme/pci Limit write queue sizes to possible cpus
nvme/pci: Fix write and poll queue types
nvme/pci: Remove last_cq_head
nvme: Namepace identification descriptor list is optional
nvme-fc: fix double-free scenarios on hw queues
nvme: else following return is not needed
nvme: add error message on mismatching controller ids
nvme_fc: add module to ops template to allow module references
nvmet-loop: Avoid preallocating big SGL for data
nvme-fc: Avoid preallocating big SGL for data
nvme-rdma: Avoid preallocating big SGL for data
Linus Torvalds [Fri, 13 Dec 2019 22:24:54 +0000 (14:24 -0800)]
Merge tag 'io_uring-5.5-20191212' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- A tweak to IOSQE_IO_LINK (also marked for stable) to allow links that
don't sever if the result is < 0.
This is mostly for linked timeouts, where if we ask for a pure
timeout we always get -ETIME. This makes links useless for that case,
hence allow a case where it works.
- Five minor optimizations to fix and improve cases that regressed
since v5.4.
- An SQTHREAD locking fix.
- A sendmsg/recvmsg iov assignment fix.
- Net fix where read_iter/write_iter don't honor IOCB_NOWAIT, and
subsequently ensuring that works for io_uring.
- Fix a case where for an invalid opcode we might return -EBADF instead
of -EINVAL, if the ->fd of that sqe was set to an invalid fd value.
* tag 'io_uring-5.5-20191212' of git://git.kernel.dk/linux-block:
io_uring: ensure we return -EINVAL on unknown opcode
io_uring: add sockets to list of files that support non-blocking issue
net: make socket read/write_iter() honor IOCB_NOWAIT
io_uring: only hash regular files for async work execution
io_uring: run next sqe inline if possible
io_uring: don't dynamically allocate poll data
io_uring: deferred send/recvmsg should assign iov
io_uring: sqthread should grab ctx->uring_lock for submissions
io-wq: briefly spin for new work after finishing work
io-wq: remove worker->wait waitqueue
io_uring: allow unbreakable links
Linus Torvalds [Fri, 13 Dec 2019 22:13:15 +0000 (14:13 -0800)]
Merge tag 'for-5.5/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM multipath by restoring full path selector functionality for
bio-based configurations that don't haave a SCSI device handler.
- Fix dm-btree removal to ensure non-root btree nodes have at least
(max_entries / 3) entries. This resolves userspace thin_check
utility's report of "too few entries in btree_node".
- Fix both the DM thin-provisioning and dm-clone targets to properly
flush the data device prior to metadata commit. This resolves the
potential for inconsistency across a power loss event when the data
device has a volatile writeback cache.
- Small documentation fixes to dm-clone and dm-integrity.
* tag 'for-5.5/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
docs: dm-integrity: remove reference to ARC4
dm thin: Flush data device before committing metadata
dm thin metadata: Add support for a pre-commit callback
dm clone: Flush destination device before committing metadata
dm clone metadata: Use a two phase commit
dm clone metadata: Track exact changes per transaction
dm btree: increase rebalance threshold in __rebalance2()
dm: add dm-clone to the documentation index
dm mpath: remove harmful bio-based optimization
Linus Torvalds [Fri, 13 Dec 2019 22:02:12 +0000 (14:02 -0800)]
Merge tag 'sizeof_field-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull FIELD_SIZEOF conversion from Kees Cook:
"A mostly mechanical treewide conversion from FIELD_SIZEOF() to
sizeof_field(). This avoids the redundancy of having 2 macros
(actually 3) doing the same thing, and consolidates on sizeof_field().
While "field" is not an accurate name, it is the common name used in
the kernel, and doesn't result in any unintended innuendo.
As there are still users of FIELD_SIZEOF() in -next, I will clean up
those during this coming development cycle and send the final old
macro removal patch at that time"
* tag 'sizeof_field-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
treewide: Use sizeof_field() macro
MIPS: OCTEON: Replace SIZEOF_FIELD() macro
Chris Wilson [Fri, 13 Dec 2019 16:03:47 +0000 (16:03 +0000)]
drm/i915: Use EAGAIN for trylock failures
While not good behaviour, it is, however, established behaviour that we
can punt EAGAIN to userspace if we need to retry the ioctl. When trying
to acquire a mutex, prefer to use EAGAIN to propagate losing the race
so that if it does end up back in userspace, we try again.
New macros ENGINE_TRACE(), CE_TRACE(), RQ_TRACE() and
GT_TRACE() are introduce to tag device name and engine
name with contexts and requests tracing in i915.
Matt Roper [Fri, 13 Dec 2019 01:06:00 +0000 (17:06 -0800)]
drm/i915/icl: Cleanup combo PHY aux power well handlers
Now that the combo PHY aux power well handlers are used exclusively on
Icelake, we can drop a bunch of the extra tests.
v2: Don't try to use intel_uncore_rmw for register updates yet; there's
pending display uncore patches that need to land first. (Lucas)
v3: Drop the combo phy assertion. It was backward before, but doesn't
seem terribly necessary. I'm keeping the IS_ICELAKE assertion
though since we often copy/paste/modify the power well tables when
defining new platforms and it's too easy to cargo cult the
ICL-specific handling to new platforms that shouldn't use it.
(Lucas)
v4: Fix build; forgot to commit all the changes. (CI)
Matt Roper [Fri, 13 Dec 2019 00:15:10 +0000 (16:15 -0800)]
drm/i915/tgl: Drop Wa#1178
The TGL workaround database no longer shows Wa #1178 (or anything
similar under different workaround names/numbers) so we should be able
to drop it. In fact Swati just discovered that applying this workaround
is the root cause of some power well enable failures we've been seeing
in CI (gitlab issue 498).
Once we stop applying this WA, TGL no longer utilizes any of the special
handling provided by icl_combo_phy_aux_power_well_ops so we can just
drop back to using the standard hsw-style power well ops instead.
v3: Drop now-unused _TGL_AUX_ANAOVRD1_C definition too. (Lucas)
Matt Roper [Fri, 13 Dec 2019 00:15:09 +0000 (16:15 -0800)]
drm/i915/ehl: Define EHL powerwells independently of ICL
Outputs C and D on EHL are combo PHY outputs and thus should not be
using the same TC AUX power well handlers as ICL. And even though
icl_combo_phy_aux_power_well_ops works okay for EHL/JSL combo PHYs none
of its special handling is actually necessary for this platform:
* EHL/JSL don't actually need to program PORT_CL_DW12
* Display WA #1178 does not apply to EHL/JSL
Thus we can simply drop back to using our standard "hsw-style" power
well ops for EHL AUX power wells.
Jerry Han [Thu, 12 Dec 2019 11:52:08 +0000 (19:52 +0800)]
drm/panel: Add Boe Himax8279d MIPI-DSI LCD panel
Support Boe Himax8279d 8.0" 1200x1920 TFT LCD panel, it is a MIPI DSI
panel.
V11:
- Use the backlight support in drm_panel to simplify the driver (Sam)
V10:
- Adjust init code, make the format more concise (Emil)
V9:
- kill off default_off_cmds (Emil)
- use mipi_dsi_dcs_set_display_{on,off} in their enable/disable
callbacks. (Emil)
- Adjusting the delay function (Emil)
V8:
- modify PARENTHESIS_ALIGNMENT format (Sam)
- use gpios are required API replace optional gpio API (Emil)
V7:
- Modify communication address
V6:
- Add the information of the reviewer
- Remove unnecessary delays, The udelay_range code gracefully returns
without hitting the scheduler on a delay of 0. (Derek)
- Merge the same data structures, like display_mode and off_cmds (Derek)
- Optimize the processing of results returned by
devm_gpiod_get_optional (Derek)
V5:
- Add the information of the reviewer (Sam)
- Delete unnecessary header files #include <linux/fb.h> (Sam)
- The config DRM_PANEL_BOE_HIMAX8279D appears twice. Drop one of them (Sam)
- ADD static, set_gpios function is not used outside this module (Sam)
V4:
- Frefix all function maes with boe_ (Sam)
- Fsed "enable_gpio" replace "reset_gpio", Make it look clearer (Sam)
- Sort include lines alphabetically (Sam)
- Fixed entries in the makefile must be sorted alphabetically (Sam)
- Add send_mipi_cmds function to avoid duplicating the code (Sam)
- Add the necessary delay(reset_delay_t5) between reset and sending
the initialization command (Rock wang)
V2:
- Use SPDX identifier (Sam)
- Use necessary header files replace drmP.h (Sam)
- Delete unnecessary header files #include <linux/err.h> (Sam)
- Specifies a GPIOs array to control the reset timing,
instead of reading "dsi-reset-sequence" data from DTS (Sam)
- Delete backlight_disable() function when already disabled (Sam)
- Use devm_of_find_backlight() replace of_find_backlight_by_node() (Sam)
- Move the necessary data in the DTS to the current file,
like porch, display_mode and Init code etc. (Sam)
- Add compatible device "boe,himax8279d10p" (Sam)
V1:
- Support Boe Himax8279d 8.0" 1200x1920 TFT LCD panel, it is a MIPI DSI
panel.
* pm-cpuidle:
cpuidle: Drop unnecessary type cast in cpuidle_poll_time()
cpuidle: Fix cpuidle_driver_state_disabled()
cpuidle: use first valid target residency as poll time
* acpi-pm:
ACPI: PM: Avoid attaching ACPI PM domain to certain devices
Juergen Gross [Thu, 12 Dec 2019 14:17:50 +0000 (15:17 +0100)]
xen/balloon: fix ballooned page accounting without hotplug enabled
When CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not defined
reserve_additional_memory() will set balloon_stats.target_pages to a
wrong value in case there are still some ballooned pages allocated via
alloc_xenballooned_pages().
This will result in balloon_process() no longer be triggered when
ballooned pages are freed in batches.
Paul Durrant [Tue, 10 Dec 2019 14:53:05 +0000 (14:53 +0000)]
xen-blkback: prevent premature module unload
Objects allocated by xen_blkif_alloc come from the 'blkif_cache' kmem
cache. This cache is destoyed when xen-blkif is unloaded so it is
necessary to wait for the deferred free routine used for such objects to
complete. This necessity was missed in commit 14855954f636 "xen-blkback:
allow module to be cleanly unloaded". This patch fixes the problem by
taking/releasing extra module references in xen_blkif_alloc/free()
respectively.
Pavel Shilovsky [Tue, 10 Dec 2019 19:44:52 +0000 (11:44 -0800)]
CIFS: Close cached root handle only if it has a lease
SMB2_tdis() checks if a root handle is valid in order to decide
whether it needs to close the handle or not. However if another
thread has reference for the handle, it may end up with putting
the reference twice. The extra reference that we want to put
during the tree disconnect is the reference that has a directory
lease. So, track the fact that we have a directory lease and
close the handle only in that case.
Steve French [Tue, 10 Dec 2019 04:34:10 +0000 (22:34 -0600)]
SMB3: Fix crash in SMB2_open_init due to uninitialized field in compounding path
Ran into an intermittent crash in
SMB2_open_init+0x2f6/0x970
due to oparms.cifs_sb not being initialized when called from:
smb2_compound_op+0x45d/0x1690
Zero the whole oparms struct in the compounding path before setting up the
oparms so we don't risk any uninitialized fields.
Fixes: fdef665ba44a ("smb3: fix mode passed in on create for modetosid mount option") Signed-off-by: Steve French <[email protected]> Acked-by: Ronnie Sahlberg <[email protected]> Reviewed-by: Pavel Shilovsky <[email protected]>
Dan Carpenter [Thu, 12 Dec 2019 09:11:30 +0000 (12:11 +0300)]
drm/i915/bios: fix off by one in parse_generic_dtd()
The "num_dtd" variable is the number of elements in the
generic_dtd->dtd[] array so the > needs to be >= to prevent reading one
element beyond the end of the array.
Dave Airlie [Fri, 13 Dec 2019 04:50:01 +0000 (14:50 +1000)]
Merge tag 'drm-fixes-5.5-2019-12-12' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
drm-fixes-5.5-2019-12-12:
amdgpu:
- DC fixes for renoir
- Gfx8 fence flush align with mesa
- Power profile fix for arcturus
- Freesync fix
- DC I2c over aux fix
- DC aux defer fix
- GPU reset fix
- GPUVM invalidation semaphore fixes for PCO and SR-IOV
- Golden settings updates for gfx10
Dave Airlie [Fri, 13 Dec 2019 04:44:08 +0000 (14:44 +1000)]
Merge tag 'drm-intel-fixes-2019-12-12' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix user reported issue #673: GPU hang on transition to idle
- Avoid corruption on the top of the screen on GLK+ by disabling FBC
- Fix non-privileged access to OA on Tigerlake
- Fix HDCP code not to touch global state when just computing commit
- Fix CI splat by saving irqstate around virtual_context_destroy
- Serialise context retirement possibly on another CPU
Saravana Kannan [Mon, 9 Dec 2019 19:31:19 +0000 (11:31 -0800)]
of/platform: Unconditionally pause/resume sync state during kernel init
Commit 5e6669387e22 ("of/platform: Pause/resume sync state during init
and of_platform_populate()") paused/resumed sync state during init only
if Linux had parsed and populated a devicetree.
However, the check for that (of_have_populated_dt()) can change after
of_platform_default_populate_init() executes. One example of this is
when devicetree unittests are enabled. This causes an unmatched
pause/resume of sync state. To avoid this, just unconditionally
pause/resume sync state during init.
Fixes: 5e6669387e22 ("of/platform: Pause/resume sync state during init and of_platform_populate()") Reported-by: kernel test robot <[email protected]> Signed-off-by: Saravana Kannan <[email protected]> Reviewed-by: Frank Rowand <[email protected]> Signed-off-by: Rob Herring <[email protected]>
Rob Herring [Wed, 11 Dec 2019 14:51:01 +0000 (08:51 -0600)]
dt-bindings: memory-controllers: tegra: Fix type references
Json-schema requires a $ref to be under an 'allOf' if there are
additional constraints otherwise the additional constraints are
ignored. (Note that this behavior will be changed in draft8.)
Yishai Hadas [Thu, 12 Dec 2019 10:02:37 +0000 (12:02 +0200)]
IB/mlx5: Fix device memory flows
Fix device memory flows so that only once there will be no live mmaped
VA to a given allocation the matching object will be destroyed.
This prevents a potential scenario that existing VA that was mmaped by
one process might still be used post its deallocation despite that it's
owned now by other process.
The above is achieved by integrating with IB core APIs to manage
mmap/munmap. Only once the refcount will become 0 the DM object and its
underlay area will be freed.
projects / linux.git / log