Linus Torvalds [Fri, 16 Feb 2024 18:48:14 +0000 (10:48 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"ARM:
- Avoid dropping the page refcount twice when freeing an unlinked
page-table subtree.
- Don't source the VFIO Kconfig twice
- Fix protected-mode locking order between kvm and vcpus
RISC-V:
- Fix steal-time related sparse warnings
x86:
- Cleanup gtod_is_based_on_tsc() to return "bool" instead of an "int"
- Make a KVM_REQ_NMI request while handling KVM_SET_VCPU_EVENTS if
and only if the incoming events->nmi.pending is non-zero. If the
target vCPU is in the UNITIALIZED state, the spurious request will
result in KVM exiting to userspace, which in turn causes QEMU to
constantly acquire and release QEMU's global mutex, to the point
where the BSP is unable to make forward progress.
- Fix a type (u8 versus u64) goof that results in pmu->fixed_ctr_ctrl
being incorrectly truncated, and ultimately causes KVM to think a
fixed counter has already been disabled (KVM thinks the old value
is '0').
- Fix a stack leak in KVM_GET_MSRS where a failed MSR read from
userspace that is ultimately ignored due to ignore_msrs=true
doesn't zero the output as intended.
Selftests cleanups and fixes:
- Remove redundant newlines from error messages.
- Delete an unused variable in the AMX test (which causes build
failures when compiling with -Werror).
- Fail instead of skipping tests if open(), e.g. of /dev/kvm, fails
with an error code other than ENOENT (a Hyper-V selftest bug
resulted in an EMFILE, and the test eventually got skipped).
- Fix TSC related bugs in several Hyper-V selftests.
- Fix a bug in the dirty ring logging test where a sem_post() could
be left pending across multiple runs, resulting in incorrect
synchronization between the main thread and the vCPU worker thread.
- Relax the dirty log split test's assertions on 4KiB mappings to fix
false positives due to the number of mappings for memslot 0 (used
for code and data that is NOT being dirty logged) changing, e.g.
due to NUMA balancing"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
KVM: arm64: Fix double-free following kvm_pgtable_stage2_free_unlinked()
RISC-V: KVM: Use correct restricted types
RISC-V: paravirt: Use correct restricted types
RISC-V: paravirt: steal_time should be static
KVM: selftests: Don't assert on exact number of 4KiB in dirty log split test
KVM: selftests: Fix a semaphore imbalance in the dirty ring logging test
KVM: x86: Fix KVM_GET_MSRS stack info leak
KVM: arm64: Do not source virt/lib/Kconfig twice
KVM: x86/pmu: Fix type length error when reading pmu->fixed_ctr_ctrl
KVM: x86: Make gtod_is_based_on_tsc() return 'bool'
KVM: selftests: Make hyperv_clock require TSC based system clocksource
KVM: selftests: Run clocksource dependent tests with hyperv_clocksource_tsc_page too
KVM: selftests: Use generic sys_clocksource_is_tsc() in vmx_nested_tsc_scaling_test
KVM: selftests: Generalize check_clocksource() from kvm_clock_test
KVM: x86: make KVM_REQ_NMI request iff NMI pending for vcpu
KVM: arm64: Fix circular locking dependency
KVM: selftests: Fail tests when open() fails with !ENOENT
KVM: selftests: Avoid infinite loop in hyperv_features when invtsc is missing
KVM: selftests: Delete superfluous, unused "stage" variable in AMX test
KVM: selftests: x86_64: Remove redundant newlines
...
Linus Torvalds [Fri, 16 Feb 2024 18:33:51 +0000 (10:33 -0800)]
Merge tag 'trace-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix the #ifndef that didn't have the 'CONFIG_' prefix on
HAVE_DYNAMIC_FTRACE_WITH_REGS
The fix to have dynamic trampolines work with x86 broke arm64 as the
config used in the #ifdef was HAVE_DYNAMIC_FTRACE_WITH_REGS and not
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS which removed the fix that the
previous fix was to fix.
- Fix tracing_on state
The code to test if "tracing_on" is set incorrectly used
ring_buffer_record_is_on() which returns false if the ring buffer
isn't able to be written to.
But the ring buffer disable has several bits that disable it. One is
internal disabling which is used for resizing and other modifications
of the ring buffer. But the "tracing_on" user space visible flag
should only report if tracing is actually on and not internally
disabled, as this can cause confusion as writing "1" when it is
disabled will not enable it.
Instead use ring_buffer_record_is_set_on() which shows the user space
visible settings.
- Fix a false positive kmemleak on saved cmdlines
Now that the saved_cmdlines structure is allocated via alloc_page()
and not via kmalloc() it has become invisible to kmemleak. The
allocation done to one of its pointers was flagged as a dangling
allocation leak. Make kmemleak aware of this allocation and free.
- Fix synthetic event dynamic strings
An update that cleaned up the synthetic event code removed the return
value of trace_string(), and had it return zero instead of the
length, causing dynamic strings in the synthetic event to always have
zero size.
- Clean up documentation and header files for seq_buf
* tag 'trace-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
seq_buf: Fix kernel documentation
seq_buf: Don't use "proxy" headers
tracing/synthetic: Fix trace_string() return value
tracing: Inform kmemleak of saved_cmdlines allocation
tracing: Use ring_buffer_record_is_set_on() in tracer_tracing_is_on()
tracing: Fix HAVE_DYNAMIC_FTRACE_WITH_REGS ifdef
Linus Torvalds [Fri, 16 Feb 2024 18:28:29 +0000 (10:28 -0800)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"It's a little busier than normal, but it's still not a lot of code and
things seem fairly quiet in general:
- Fix allocation failure during SVE coredumps
- Fix handling of SVE context on signal delivery
- Enable Neoverse N2 CPU errata workarounds for Microsoft's "Azure
Cobalt 100" clone
- Work around CMN PMU erratum in AmpereOneX implementation
- Fix typo in CXL PMU event definition
- Fix jump label asm constraints"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/sve: Lower the maximum allocation for the SVE ptrace regset
arm64: Subscribe Microsoft Azure Cobalt 100 to ARM Neoverse N2 errata
perf/arm-cmn: Workaround AmpereOneX errata AC04_MESH_1 (incorrect child count)
arm64: jump_label: use constraints "Si" instead of "i"
arm64: fix typo in comments
perf: CXL: fix mismatched cpmu event opcode
arm64/signal: Don't assume that TIF_SVE means we saved SVE state
Linus Torvalds [Fri, 16 Feb 2024 17:29:26 +0000 (09:29 -0800)]
Merge tag 'zonefs-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs fix from Damien Le Moal:
- Fix direct write error handling to avoid a race between failed IO
completion and the submission path itself which can result in an
invalid file size exposed to the user after the failed IO.
* tag 'zonefs-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: Improve error handling
Linus Torvalds [Fri, 16 Feb 2024 17:02:19 +0000 (09:02 -0800)]
Merge tag 'sound-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of device-specific fixes. It became a bit bigger than
wished, but all look reasonably small and safe to apply.
- A few Cirrus Logic CS35L56 and CS42L43 driver fixes
- ASoC SOF fixes and workarounds
- Various ASoC Intel fixes
- Lots of HD-, USB-audio and AMD ACP quirks"
* tag 'sound-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (33 commits)
ALSA: usb-audio: More relaxed check of MIDI jack names
ALSA: hda/realtek: fix mute/micmute LED For HP mt645
ALSA: hda/realtek: cs35l41: Fix order and duplicates in quirks table
ALSA: hda/realtek: cs35l41: Fix device ID / model name
ALSA: hda/realtek: cs35l41: Add internal speaker support for ASUS UM3402 with missing DSD
ASoC: cs35l56: Workaround for ACPI with broken spk-id-gpios property
ALSA: hda: Add Lenovo Legion 7i gen7 sound quirk
ASoC: SOF: IPC3: fix message bounds on ipc ops
ASoC: SOF: ipc4-pcm: Workaround for crashed firmware on system suspend
ASoC: q6dsp: fix event handler prototype
ASoC: SOF: Intel: pci-lnl: Change the topology path to intel/sof-ipc4-tplg
ASoC: SOF: Intel: pci-tgl: Change the default paths and firmware names
ASoC: amd: yc: Fix non-functional mic on Lenovo 82UU
ASoC: rt5645: Add DMI quirk for inverted jack-detect on MeeGoPad T8
ASoC: rt5645: Make LattePanda board DMI match more precise
ASoC: SOF: amd: Fix locking in ACP IRQ handler
ASoC: rt5645: Fix deadlock in rt5645_jack_detect_work()
ASoC: Intel: cht_bsw_rt5645: Cleanup codec_name handling
ASoC: Intel: Boards: Fix NULL pointer deref in BYT/CHT boards
ASoC: cs35l56: Remove default from IRQ1_CFG register
...
Linus Torvalds [Fri, 16 Feb 2024 16:55:46 +0000 (08:55 -0800)]
Merge tag 'gpio-fixes-for-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- add missing stubs for functions that are not built with GPIOLIB
disabled
* tag 'gpio-fixes-for-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: add gpio_device_get_label() stub for !GPIOLIB
gpiolib: add gpio_device_get_base() stub for !GPIOLIB
gpiolib: add gpiod_to_gpio_device() stub for !GPIOLIB
Linus Torvalds [Fri, 16 Feb 2024 16:05:30 +0000 (08:05 -0800)]
Merge tag 'drm-fixes-2024-02-16' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Regular weekly fixes, nothing too major, mostly amdgpu, then i915, xe,
msm and nouveau with some scattered bits elsewhere.
crtc:
- fix uninit variable
prime:
- support > 4GB page arrays
buddy:
- fix error handling in allocations
i915:
- fix blankscreen on JSL chromebooks
- stable fix to limit DP sst link rates
xe:
- Fix an out-of-bounds shift.
- Fix the display code thinking xe uses shmem
- Fix a warning about index out-of-bound
- Fix a clang-16 compilation warning
amdgpu:
- PSR fixes
- Suspend/resume fixes
- Link training fix
- Aspect ratio fix
- DCN 3.5 fixes
- VCN 4.x fix
- GFX 11 fix
- Misc display fixes
- Misc small fixes
amdkfd:
- Cache size reporting fix
- SIMD distribution fix
msm:
- GPU:
- dmabuf vmap fix
- a610 UBWC corruption fix (incorrect hbb)
- revert a commit that was making GPU recovery unreliable
- tlb invalidation fix
* tag 'drm-fixes-2024-02-16' of git://anongit.freedesktop.org/drm/drm: (38 commits)
drm/amdgpu: Fix implicit assumtion in gfx11 debug flags
drm/amdkfd: update SIMD distribution algo for GFXIP 9.4.2 onwards
drm/amd/display: Increase ips2_eval delay for DCN35
drm/amdgpu/display: Initialize gamma correction mode variable in dcn30_get_gamcor_current()
drm/amdgpu/soc21: update VCN 4 max HEVC encoding resolution
drm/amd/display: fixed integer types and null check locations
drm/amd/display: Fix array-index-out-of-bounds in dcn35_clkmgr
drm/amd/display: Preserve original aspect ratio in create stream
drm/amd/display: Fix possible NULL dereference on device remove/driver unload
Revert "drm/amd/display: increased min_dcfclk_mhz and min_fclk_mhz"
drm/amd/display: Add align done check
Revert "drm/amd: flush any delayed gfxoff on suspend entry"
drm/amd: Stop evicting resources on APUs in suspend
drm/amd/display: Fix possible buffer overflow in 'find_dcfclk_for_voltage()'
drm/amd/display: Fix possible use of uninitialized 'max_chunks_fbc_mode' in 'calculate_bandwidth()'
drm/amd/display: Initialize 'wait_time_microsec' variable in link_dp_training_dpia.c
drm/amd/display: Fix && vs || typos
drm/amdkfd: Fix L2 cache size reporting in GFX9.4.3
drm/amdgpu: make damage clips support configurable
drm/msm: Wire up tlb ops
...
Dave Airlie [Fri, 16 Feb 2024 05:45:03 +0000 (15:45 +1000)]
Merge tag 'drm-xe-fixes-2024-02-15' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Fix an out-of-bounds shift.
- Fix the display code thinking xe uses shmem
- Fix a warning about index out-of-bound
- Fix a clang-16 compilation warning
Dave Airlie [Fri, 16 Feb 2024 04:33:09 +0000 (14:33 +1000)]
Merge tag 'drm-misc-fixes-2024-02-15' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
A suspend/resume error fix for ivpu, a couple of scheduler fixes for
nouveau, a patch to support large page arrays in prime, a uninitialized
variable fix in crtc, a locking fix in rockchip/vop2 and a buddy
allocator error reporting fix.
Damien Le Moal [Thu, 8 Feb 2024 08:26:59 +0000 (17:26 +0900)]
zonefs: Improve error handling
Write error handling is racy and can sometime lead to the error recovery
path wrongly changing the inode size of a sequential zone file to an
incorrect value which results in garbage data being readable at the end
of a file. There are 2 problems:
1) zonefs_file_dio_write() updates a zone file write pointer offset
after issuing a direct IO with iomap_dio_rw(). This update is done
only if the IO succeed for synchronous direct writes. However, for
asynchronous direct writes, the update is done without waiting for
the IO completion so that the next asynchronous IO can be
immediately issued. However, if an asynchronous IO completes with a
failure right before the i_truncate_mutex lock protecting the update,
the update may change the value of the inode write pointer offset
that was corrected by the error path (zonefs_io_error() function).
2) zonefs_io_error() is called when a read or write error occurs. This
function executes a report zone operation using the callback function
zonefs_io_error_cb(), which does all the error recovery handling
based on the current zone condition, write pointer position and
according to the mount options being used. However, depending on the
zoned device being used, a report zone callback may be executed in a
context that is different from the context of __zonefs_io_error(). As
a result, zonefs_io_error_cb() may be executed without the inode
truncate mutex lock held, which can lead to invalid error processing.
Fix both problems as follows:
- Problem 1: Perform the inode write pointer offset update before a
direct write is issued with iomap_dio_rw(). This is safe to do as
partial direct writes are not supported (IOMAP_DIO_PARTIAL is not
set) and any failed IO will trigger the execution of zonefs_io_error()
which will correct the inode write pointer offset to reflect the
current state of the one on the device.
- Problem 2: Change zonefs_io_error_cb() into zonefs_handle_io_error()
and call this function directly from __zonefs_io_error() after
obtaining the zone information using blkdev_report_zones() with a
simple callback function that copies to a local stack variable the
struct blk_zone obtained from the device. This ensures that error
handling is performed holding the inode truncate mutex.
This change also simplifies error handling for conventional zone files
by bypassing the execution of report zones entirely. This is safe to
do because the condition of conventional zones cannot be read-only or
offline and conventional zone files are always fully mapped with a
constant file size.
Linus Torvalds [Thu, 15 Feb 2024 19:39:27 +0000 (11:39 -0800)]
Merge tag 'net-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from can, wireless and netfilter.
Current release - regressions:
- af_unix: fix task hung while purging oob_skb in GC
- pds_core: do not try to run health-thread in VF path
Current release - new code bugs:
- sched: act_mirred: don't zero blockid when net device is being
deleted
Previous releases - regressions:
- netfilter:
- nat: restore default DNAT behavior
- nf_tables: fix bidirectional offload, broken when unidirectional
offload support was added
- openvswitch: limit the number of recursions from action sets
- eth: i40e: do not allow untrusted VF to remove administratively set
MAC address
Previous releases - always broken:
- tls: fix races and bugs in use of async crypto
- mptcp: prevent data races on some of the main socket fields, fix
races in fastopen handling
- dpll: fix possible deadlock during netlink dump operation
- dsa: lan966x: fix crash when adding interface under a lag when some
of the ports are disabled
- can: j1939: prevent deadlock by changing j1939_socks_lock to rwlock
Misc:
- a handful of fixes and reliability improvements for selftests
- fix sysfs documentation missing net/ in paths
- finish the work of squashing the missing MODULE_DESCRIPTION()
warnings in networking"
* tag 'net-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits)
net: fill in MODULE_DESCRIPTION()s for missing arcnet
net: fill in MODULE_DESCRIPTION()s for mdio_devres
net: fill in MODULE_DESCRIPTION()s for ppp
net: fill in MODULE_DESCRIPTION()s for fddik/skfp
net: fill in MODULE_DESCRIPTION()s for plip
net: fill in MODULE_DESCRIPTION()s for ieee802154/fakelb
net: fill in MODULE_DESCRIPTION()s for xen-netback
net: ravb: Count packets instead of descriptors in GbEth RX path
pppoe: Fix memory leak in pppoe_sendmsg()
net: sctp: fix skb leak in sctp_inq_free()
net: bcmasp: Handle RX buffer allocation failure
net-timestamp: make sk_tskey more predictable in error path
selftests: tls: increase the wait in poll_partial_rec_async
ice: Add check for lport extraction to LAG init
netfilter: nf_tables: fix bidirectional offload regression
netfilter: nat: restore default DNAT behavior
netfilter: nft_set_pipapo: fix missing : in kdoc
igc: Remove temporary workaround
igb: Fix string truncation warnings in igb_set_fw_version
can: netlink: Fix TDCO calculation using the old data bittiming
...
Linus Torvalds [Thu, 15 Feb 2024 19:33:35 +0000 (11:33 -0800)]
Merge tag 'for-linus-6.8a-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Fixes and simple cleanups:
- use a proper flexible array instead of a one-element array in order
to avoid array-bounds sanitizer errors
- add NULL pointer checks after allocating memory
- use memdup_array_user() instead of open-coding it
- fix a rare race condition in Xen event channel allocation code
- make struct bus_type instances const
- make kerneldoc inline comments match reality"
* tag 'for-linus-6.8a-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/events: close evtchn after mapping cleanup
xen/gntalloc: Replace UAPI 1-element array
xen: balloon: make balloon_subsys const
xen: pcpu: make xen_pcpu_subsys const
xen/privcmd: Use memdup_array_user() in alloc_ioreq()
x86/xen: Add some null pointer checking to smp.c
xen/xenbus: document will_handle argument for xenbus_watch_path()
drm/amdgpu: Fix implicit assumtion in gfx11 debug flags
Gfx11 debug flags mask is currently set with an implicit assumption that
no other mqd update flags exist. This needs to be fixed with newly
introduced flag UPDATE_FLAG_IS_GWS by the previous patch.
drm/amdkfd: update SIMD distribution algo for GFXIP 9.4.2 onwards
In certain cooperative group dispatch scenarios the default SPI resource
allocation may cause reduced per-CU workgroup occupancy. Set
COMPUTE_RESOURCE_LIMITS.FORCE_SIMD_DIST=1 to mitigate soft hang
scenarions.
drm/amdgpu/display: Initialize gamma correction mode variable in dcn30_get_gamcor_current()
The dcn30_get_gamcor_current() function is responsible for determining
the current gamma correction mode used by the display controller.
However, the 'mode' variable, which stores the gamma correction mode,
was not initialized before its first usage, leading to an uninitialized
symbol error.
Thus initializes the 'mode' variable with a default value of LUT_BYPASS
before the conditional statements in the function, improves code clarity
and stability, ensuring correct behavior of the
dcn30_get_gamcor_current() function in determining the gamma correction
mode.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_dpp_cm.c:77 dpp30_get_gamcor_current() error: uninitialized symbol 'mode'.
Tom Chung [Tue, 30 Jan 2024 07:34:08 +0000 (15:34 +0800)]
drm/amd/display: Preserve original aspect ratio in create stream
[Why]
The original picture aspect ratio in mode struct may have chance be
overwritten with wrong aspect ratio data in create_stream_for_sink().
It will create a different VIC output and cause HDMI compliance test
failed.
[How]
Preserve the original picture aspect ratio data during create the
stream.
drm/amd/display: Fix possible NULL dereference on device remove/driver unload
As part of a cleanup amdgpu_dm_fini() function, which is typically
called when a device is being shut down or a driver is being unloaded
The below error message suggests that there is a potential null pointer
dereference issue with adev->dm.dc.
In the below, line of code where adev->dm.dc is used without a preceding
null check:
for (i = 0; i < adev->dm.dc->caps.max_links; i++) {
To fix this issue, add a null check for adev->dm.dc before this line.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:1959 amdgpu_dm_fini() error: we previously assumed 'adev->dm.dc' could be null (see line 1943)
Revert "drm/amd: flush any delayed gfxoff on suspend entry"
commit ab4750332dbe ("drm/amdgpu/sdma5.2: add begin/end_use ring
callbacks") caused GFXOFF control to be used more heavily and the
codepath that was removed from commit 0dee72639533 ("drm/amd: flush any
delayed gfxoff on suspend entry") now can be exercised at suspend again.
Users report that by using GNOME to suspend the lockscreen trigger will
cause SDMA traffic and the system can deadlock.
drm/amd: Stop evicting resources on APUs in suspend
commit 5095d5418193 ("drm/amd: Evict resources during PM ops prepare()
callback") intentionally moved the eviction of resources to earlier in
the suspend process, but this introduced a subtle change that it occurs
before adev->in_s0ix or adev->in_s3 are set. This meant that APUs
actually started to evict resources at suspend time as well.
Explicitly set s0ix or s3 in the prepare() stage, and unset them if the
prepare() stage failed.
v2: squash in warning fix from Stephen Rothwell
Reported-by: Jürg Billeter <[email protected]> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3132#note_2271038 Fixes: 5095d5418193 ("drm/amd: Evict resources during PM ops prepare() callback") Acked-by: Alex Deucher <[email protected]> Signed-off-by: Mario Limonciello <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
drm/amd/display: Fix possible buffer overflow in 'find_dcfclk_for_voltage()'
when 'find_dcfclk_for_voltage()' function is looping over
VG_NUM_SOC_VOLTAGE_LEVELS (which is 8), but the size of the DcfClocks
array is VG_NUM_DCFCLK_DPM_LEVELS (which is 7).
When the loop variable i reaches 7, the function tries to access
clock_table->DcfClocks[7]. However, since the size of the DcfClocks
array is 7, the valid indices are 0 to 6. Index 7 is beyond the size of
the array, leading to a buffer overflow.
Reported by smatch & thus fixing the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn301/vg_clk_mgr.c:550 find_dcfclk_for_voltage() error: buffer overflow 'clock_table->DcfClocks' 7 <= 7
If 'data->fbc_en[i]' is not equal to 1 for any i, max_chunks_fbc_mode
will not be initialized if it's used outside of this for loop.
Ensure that 'max_chunks_fbc_mode' is properly initialized before it's
used. Initialize it to a default value right after its declaration to
ensure that it gets a value assigned under all possible control flow
paths.
Thus fixing the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/basics/dce_calcs.c:914 calculate_bandwidth() error: uninitialized symbol 'max_chunks_fbc_mode'.
drivers/gpu/drm/amd/amdgpu/../display/dc/basics/dce_calcs.c:917 calculate_bandwidth() error: uninitialized symbol 'max_chunks_fbc_mode'.
Above line is trying to assign the maximum value between
'wait_time_microsec' and 'DPIA_CLK_SYNC_DELAY' to wait_time_microsec.
However, 'wait_time_microsec' has not been assigned a value before this
line, initialize 'wait_time_microsec' at the point of declaration.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_training_dpia.c:697 dpia_training_eq_non_transparent() error: uninitialized symbol 'wait_time_microsec'.
Dan Carpenter [Fri, 9 Feb 2024 13:02:42 +0000 (16:02 +0300)]
drm/amd/display: Fix && vs || typos
These ANDs should be ORs or it will lead to a NULL dereference.
Fixes: fb5a3d037082 ("drm/amd/display: Add NULL test for 'timing generator' in 'dcn21_set_pipe()'") Fixes: 886571d217d7 ("drm/amd/display: Fix 'panel_cntl' could be null in 'dcn21_set_backlight_level()'") Reviewed-by: Anthony Koo <[email protected]> Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Kent Russell [Tue, 6 Feb 2024 17:45:44 +0000 (12:45 -0500)]
drm/amdkfd: Fix L2 cache size reporting in GFX9.4.3
Its currently incorrectly multiplied by number of XCCs in the partition
Fixes: be457b2252b6 ("drm/amdkfd: Update cache info for GFX 9.4.3") Signed-off-by: Kent Russell <[email protected]> Reviewed-by: Mukul Joshi <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Hamza Mahfooz [Thu, 8 Feb 2024 21:23:29 +0000 (16:23 -0500)]
drm/amdgpu: make damage clips support configurable
We have observed that there are quite a number of PSR-SU panels on the
market that are unable to keep up with what user space throws at them,
resulting in hangs and random black screens. So, make damage clips
support configurable and disable it by default for PSR-SU displays.
Linus Torvalds [Thu, 15 Feb 2024 19:14:33 +0000 (11:14 -0800)]
update workarounds for gcc "asm goto" issue
In commit 4356e9f841f7 ("work around gcc bugs with 'asm goto' with
outputs") I did the gcc workaround unconditionally, because the cause of
the bad code generation wasn't entirely clear.
In the meantime, Jakub Jelinek debugged the issue, and has come up with
a fix in gcc [2], which also got backported to the still maintained
branches of gcc-11, gcc-12 and gcc-13.
Note that while the fix technically wasn't in the original gcc-14
branch, Jakub says:
"while it is true that no GCC 14 snapshots until today (or whenever the
fix will be committed) have the fix, for GCC trunk it is up to the
distros to use the latest snapshot if they use it at all and would
allow better testing of the kernel code without the workaround, so
that if there are other issues they won't be discovered years later.
Most userland code doesn't actually use asm goto with outputs..."
so we will consider gcc-14 to be fixed - if somebody is using gcc
snapshots of the gcc-14 before the fix, they should upgrade.
Note that while the bug goes back to gcc-11, in practice other gcc
changes seem to have effectively hidden it since gcc-12.1 as per a
bisect by Jakub. So even a gcc-14 snapshot without the fix likely
doesn't show actual problems.
Also, make the default 'asm_goto_output()' macro mark the asm as
volatile by hand, because of an unrelated gcc issue [1] where it doesn't
match the documented behavior ("asm goto is always volatile").
Linus Torvalds [Thu, 15 Feb 2024 18:19:55 +0000 (10:19 -0800)]
Merge tag 'devicetree-fixes-for-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Improve devlink dependency parsing for DT graphs
- Fix devlink handling of io-channels dependencies
- Fix PCI addressing in marvell,prestera example
- A few schema fixes for property constraints
- Improve performance of DT unprobed devices kselftest
- Fix regression in DT_SCHEMA_FILES handling
- Fix compile error in unittest for !OF_DYNAMIC
* tag 'devicetree-fixes-for-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: ufs: samsung,exynos-ufs: Add size constraints on "samsung,sysreg"
of: property: Add in-ports/out-ports support to of_graph_get_port_parent()
of: property: Improve finding the supplier of a remote-endpoint property
of: property: Improve finding the consumer of a remote-endpoint property
net: marvell,prestera: Fix example PCI bus addressing
of: unittest: Fix compile in the non-dynamic case
of: property: fix typo in io-channels
dt-bindings: tpm: Drop type from "resets"
dt-bindings: display: nxp,tda998x: Fix 'audio-ports' constraints
dt-bindings: xilinx: replace Piyush Mehta maintainership
kselftest: dt: Stop relying on dirname to improve performance
dt-bindings: don't anchor DT_SCHEMA_FILES to bindings directory
Andy Shevchenko [Thu, 15 Feb 2024 15:25:06 +0000 (17:25 +0200)]
seq_buf: Fix kernel documentation
There are plenty of issues with the kernel documentation here:
- misspelled word "sequence"
- different style of returned value descriptions
- missed Return sections
- unaligned style of ASCII / NUL-terminated / etc
- wrong function references
Linus Torvalds [Thu, 15 Feb 2024 17:13:12 +0000 (09:13 -0800)]
Merge tag 'spi-fix-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A smallish collection of fixes for SPI, all driver specific, plus one
device ID addition for a new Intel part.
The ppc4xx isn't routinely covered by most of the automated testing so
there were some errors that were missed in some of the recent API
conversions, otherwise there's nothing super remarkable here"
* tag 'spi-fix-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi-mxs: Fix chipselect glitch
spi: intel-pci: Add support for Lunar Lake-M SPI serial flash
spi: omap2-mcspi: Revert FIFO support without DMA
spi: ppc4xx: Drop write-only variable
spi: ppc4xx: Fix fallout from rename in struct spi_bitbang
spi: ppc4xx: Fix fallout from include cleanup
spi: spi-ppc4xx: include missing platform_device.h
spi: imx: fix the burst length at DMA mode and CPU mode
Linus Torvalds [Thu, 15 Feb 2024 17:11:06 +0000 (09:11 -0800)]
Merge tag 'regmap-fix-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap test fixes from Mark Brown:
"Guenter runs a lot of KUnit tests so noticed that there were a couple
of the regmap tests, including the newly added noinc test, which could
show spurious failures due to the use of randomly generated test
values. These changes handle the randomly generated data properly"
* tag 'regmap-fix-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: kunit: Ensure that changed bytes are actually different
regmap: kunit: fix raw noinc write test wrapping
Linus Torvalds [Thu, 15 Feb 2024 17:08:19 +0000 (09:08 -0800)]
Merge tag 'hid-for-linus-2024021501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- fix for 'MSC_SERIAL = 0' corner case handling in wacom driver (Jason
Gerecke)
- ACPI S3 suspend/resume fix for intel-ish-hid (Even Xu)
- race condition fix preventing Wacom driver from losing events shortly
after initialization (Jason Gerecke)
- fix preventing certain Logitech HID++ devices from spamming kernel
log (Oleksandr Natalenko)
* tag 'hid-for-linus-2024021501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: wacom: generic: Avoid reporting a serial of '0' to userspace
HID: Intel-ish-hid: Ishtp: Fix sensor reads after ACPI S3 suspend
HID: multitouch: Add required quirk for Synaptics 0xcddc device
HID: wacom: Do not register input devices until after hid_hw_start
HID: logitech-hidpp: Do not flood kernel log
Rob Clark [Tue, 13 Feb 2024 17:23:40 +0000 (09:23 -0800)]
drm/msm: Wire up tlb ops
The brute force iommu_flush_iotlb_all() was good enough for unmap, but
in some cases a map operation could require removing a table pte entry
to replace with a block entry. This also requires tlb invalidation.
Missing this was resulting an obscure iova fault on what should be a
valid buffer address.
Thanks to Robin Murphy for helping me understand the cause of the fault.
Cc: Robin Murphy <[email protected]> Cc: [email protected] Fixes: b145c6e65eb0 ("drm/msm: Add support to create a local pagetable") Signed-off-by: Rob Clark <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/578117/
Thorsten Blum [Wed, 14 Feb 2024 22:05:56 +0000 (23:05 +0100)]
tracing/synthetic: Fix trace_string() return value
Fix trace_string() by assigning the string length to the return variable
which got lost in commit ddeea494a16f ("tracing/synthetic: Use union
instead of casts") and caused trace_string() to always return 0.
Jakub Kicinski [Thu, 15 Feb 2024 16:03:49 +0000 (08:03 -0800)]
Merge branch 'fix-module_description-for-net-p6'
Breno Leitao says:
====================
Fix MODULE_DESCRIPTION() for net (p6)
There are a few network modules left that misses MODULE_DESCRIPTION(),
causing a warnning when compiling with W=1. Example:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/arcnet/....
This last patchset solves the problem for all the missing driver. It is
not expect to see any warning for the driver/net and net/ directory once
all these patches have landed.
Takashi Iwai [Thu, 15 Feb 2024 15:31:44 +0000 (16:31 +0100)]
ALSA: usb-audio: More relaxed check of MIDI jack names
The USB audio driver tries to retrieve MIDI jack name strings that can
be used for rawmidi substream names and sequencer port names, but its
checking is too strict: often the firmware provides the jack info for
unexpected directions, and then we miss the info although it's
present.
In this patch, the code to extract the jack info is changed to allow
both in and out directions in a single loop. That is, the former two
functions to obtain the descriptor pointers for jack in and out are
changed to a single function that returns iJack of the corresponding
jack ID, no matter which direction is used. It's a code
simplification at the same time as well as the fix.
Gavrilov Ilia [Wed, 14 Feb 2024 09:01:50 +0000 (09:01 +0000)]
pppoe: Fix memory leak in pppoe_sendmsg()
syzbot reports a memory leak in pppoe_sendmsg [1].
The problem is in the pppoe_recvmsg() function that handles errors
in the wrong order. For the skb_recv_datagram() function, check
the pointer to skb for NULL first, and then check the 'error' variable,
because the skb_recv_datagram() function can set 'error'
to -EAGAIN in a loop but return a correct pointer to socket buffer
after a number of attempts, though 'error' remains set to -EAGAIN.
skb_recv_datagram
__skb_recv_datagram // Loop. if (err == -EAGAIN) then
// go to the next loop iteration
__skb_try_recv_datagram // if (skb != NULL) then return 'skb'
// else if a signal is received then
// return -EAGAIN
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with Syzkaller.
Dmitry Antipov [Wed, 14 Feb 2024 08:22:24 +0000 (11:22 +0300)]
net: sctp: fix skb leak in sctp_inq_free()
In case of GSO, 'chunk->skb' pointer may point to an entry from
fraglist created in 'sctp_packet_gso_append()'. To avoid freeing
random fraglist entry (and so undefined behavior and/or memory
leak), introduce 'sctp_inq_chunk_free()' helper to ensure that
'chunk->skb' is set to 'chunk->head_skb' (i.e. fraglist head)
before calling 'sctp_chunk_free()', and use the aforementioned
helper in 'sctp_inq_pop()' as well.
Takashi Iwai [Thu, 15 Feb 2024 14:00:31 +0000 (15:00 +0100)]
Merge tag 'asoc-fix-v6.8-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.8
A relatively large set of fixes and quirk additions here but they're all
driver specific, people seem to be back into the swing of things after
the holidays. This is all driver specific and much of it fairly minor.
Florian Fainelli [Tue, 13 Feb 2024 17:33:39 +0000 (09:33 -0800)]
net: bcmasp: Handle RX buffer allocation failure
The buffer_pg variable needs to hold an order-5 allocation (32 x
PAGE_SIZE) which, under memory pressure may fail to be allocated. Deal
with that error condition properly to avoid doing a NULL pointer
de-reference in the subsequent call to dma_map_page().
In addition, the err_reclaim_tx error label in bcmasp_netif_init() needs
to ensure that the TX NAPI object is properly deleted, otherwise
unregister_netdev() will spin forever attempting to test and clear
the NAPI_STATE_HASHED bit.
Mark Brown [Tue, 13 Feb 2024 18:24:38 +0000 (18:24 +0000)]
arm64/sve: Lower the maximum allocation for the SVE ptrace regset
Doug Anderson observed that ChromeOS crashes are being reported which
include failing allocations of order 7 during core dumps due to ptrace
allocating storage for regsets:
which is the maximum size of the SVE regset. As Doug observes it is not
entirely surprising that such a large allocation of contiguous memory might
fail on a long running system.
The SVE regset is currently sized to hold SVE registers with a VQ of
SVE_VQ_MAX which is 512, substantially more than the architectural maximum
of 16 which we might see even in a system emulating the limits of the
architecture. Since we don't expose the size we tell the regset core
externally let's define ARCH_SVE_VQ_MAX with the actual architectural
maximum and use that for the regset, we'll still overallocate most of the
time but much less so which will be helpful even if the core is fixed to
not require contiguous allocations.
Specify ARCH_SVE_VQ_MAX in terms of the maximum value that can be written
into ZCR_ELx.LEN (where this is set in the hardware). For consistency
update the maximum SME vector length to be specified in the same style
while we are at it.
We could also teach the ptrace core about runtime discoverable regset sizes
but that would be a more invasive change and this is being observed in
practical systems.
Easwar Hariharan [Wed, 14 Feb 2024 17:55:18 +0000 (17:55 +0000)]
arm64: Subscribe Microsoft Azure Cobalt 100 to ARM Neoverse N2 errata
Add the MIDR value of Microsoft Azure Cobalt 100, which is a Microsoft
implemented CPU based on r0p0 of the ARM Neoverse N2 CPU, and therefore
suffers from all the same errata.
Paolo Abeni [Thu, 15 Feb 2024 11:31:22 +0000 (12:31 +0100)]
Merge tag 'linux-can-fixes-for-6.8-20240214' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2024-02-14
this is a pull request of 3 patches for net/master.
the first patch is by Ziqi Zhao and targets the CAN J1939 protocol, it
fixes a potential deadlock by replacing the spinlock by an rwlock.
Oleksij Rempel's patch adds a missing spin_lock_bh() to prevent a
potential Use-After-Free in the CAN J1939's
setsockopt(SO_J1939_FILTER).
Maxime Jayat contributes a patch to fix the transceiver delay
compensation (TDCO) calculation, which is needed for higher CAN-FD bit
rates (usually 2Mbit/s).
* tag 'linux-can-fixes-for-6.8-20240214' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: netlink: Fix TDCO calculation using the old data bittiming
can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER)
can: j1939: prevent deadlock by changing j1939_socks_lock to rwlock
====================
Vadim Fedorenko [Tue, 13 Feb 2024 11:04:28 +0000 (03:04 -0800)]
net-timestamp: make sk_tskey more predictable in error path
When SOF_TIMESTAMPING_OPT_ID is used to ambiguate timestamped datagrams,
the sk_tskey can become unpredictable in case of any error happened
during sendmsg(). Move increment later in the code and make decrement of
sk_tskey in error path. This solution is still racy in case of multiple
threads doing snedmsg() over the very same socket in parallel, but still
makes error path much more predictable.
drm/xe/pt: Allow for stricter type- and range checking
Distinguish between xe_pt and the xe_pt_dir subclass when
allocating and freeing. Also use a fixed-size array for the
xe_pt_dir page entries to make life easier for dynamic range-
checkers. Finally rename the page-directory child pointer array
to "children".
While no functional change, this fixes ubsan splats similar to:
shmem ensures the memory is cleared on allocation, however here we are
using TTM, which doesn't natively support shmem (other than for swap),
but instead just allocates normal system memory. And we only zero such
memory for userspace allocations. In the case of intel_fbdev we are
missing the memset_io() since display path incorrectly thinks object is
shmem based.
The function xe_vm_prepare_vma was blindly accepting zero as the
number of fences and forwarded that to drm_exec_prepare_obj.
However, that leads to an out-of-bounds shift in the
dma_resv_reserve_fences() and while one could argue that the
dma_resv code should be robust against that, avoid attempting
to reserve zero fences.
Relevant stack trace:
[773.183188] ------------[ cut here ]------------
[773.183199] UBSAN: shift-out-of-bounds in ../include/linux/log2.h:57:13
[773.183241] shift exponent 64 is too large for 64-bit type 'long unsigned int'
[773.183254] CPU: 2 PID: 1816 Comm: xe_evict Tainted: G U 6.8.0-rc3-xe #1
[773.183256] Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 2014 10/14/2022
[773.183257] Call Trace:
[773.183258] <TASK>
[773.183260] dump_stack_lvl+0xaf/0xd0
[773.183266] dump_stack+0x10/0x20
[773.183283] ubsan_epilogue+0x9/0x40
[773.183286] __ubsan_handle_shift_out_of_bounds+0x10f/0x170
[773.183293] dma_resv_reserve_fences.cold+0x2b/0x48
[773.183295] ? ww_mutex_lock+0x3c/0x110
[773.183301] drm_exec_prepare_obj+0x45/0x60 [drm_exec]
[773.183313] xe_vm_prepare_vma+0x33/0x70 [xe]
[773.183375] xe_vma_destroy_unlocked+0x55/0xa0 [xe]
[773.183427] xe_vm_close_and_put+0x526/0x940 [xe]
Jakub Kicinski [Tue, 13 Feb 2024 14:20:55 +0000 (06:20 -0800)]
selftests: tls: increase the wait in poll_partial_rec_async
Test runners on debug kernels occasionally fail with:
# # RUN tls_err.13_aes_gcm.poll_partial_rec_async ...
# # tls.c:1883:poll_partial_rec_async:Expected poll(&pfd, 1, 5) (0) == 1 (1)
# # tls.c:1870:poll_partial_rec_async:Expected status (256) == 0 (0)
# # poll_partial_rec_async: Test failed at step #17
# # FAIL tls_err.13_aes_gcm.poll_partial_rec_async
# not ok 699 tls_err.13_aes_gcm.poll_partial_rec_async
# # FAILED: 698 / 699 tests passed.
This points to the second poll() in the test which is expected
to wait for the sender to send the rest of the data.
Apparently under some conditions that doesn't happen within 5ms,
bump the timeout to 20ms.
Dave Ertman [Tue, 13 Feb 2024 18:39:55 +0000 (10:39 -0800)]
ice: Add check for lport extraction to LAG init
To fully support initializing the LAG support code, a DDP package that
extracts the logical port from the metadata is required. If such a
package is not present, there could be difficulties in supporting some
bond types.
Add a check into the initialization flow that will bypass the new paths
if any of the support pieces are missing.
Jakub Kicinski [Thu, 15 Feb 2024 01:32:37 +0000 (17:32 -0800)]
Merge tag 'wireless-2024-02-14' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Valentine's day edition, with just few fixes because
that's how we love it ;-)
iwlwifi:
- correct A3 in A-MSDUs
- fix crash when operating as AP and running out of station
slots to use
- clear link ID to correct some later checks against it
- fix error codes in SAR table loading
- fix error path in PPAG table read
mac80211:
- reload a pointer after SKB may have changed
(only in certain monitor inject mode scenarios)
* tag 'wireless-2024-02-14' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: mvm: fix a crash when we run out of stations
wifi: iwlwifi: uninitialized variable in iwl_acpi_get_ppag_table()
wifi: iwlwifi: Fix some error codes
wifi: iwlwifi: clear link_id in time_event
wifi: iwlwifi: mvm: use correct address 3 in A-MSDU
wifi: mac80211: reload info pointer in ieee80211_tx_dequeue()
====================
Linus Torvalds [Thu, 15 Feb 2024 00:06:31 +0000 (16:06 -0800)]
Merge tag 'mips-fixes_6.8_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- Fix for broken ipv6 checksums
- Fix handling of exceptions in delay slots
* tag 'mips-fixes_6.8_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
mm/memory: Use exception ip to search exception tables
MIPS: Clear Cause.BD in instruction_pointer_set
ptrace: Introduce exception_ip arch hook
MIPS: Add 'memory' clobber to csum_ipv6_magic() inline assembler
Linus Torvalds [Thu, 15 Feb 2024 00:02:36 +0000 (16:02 -0800)]
Merge tag 'landlock-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock test fixes from Mickaël Salaün:
"Fix build issues for tests, and improve test compatibility"
* tag 'landlock-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Fix capability for net_test
selftests/landlock: Fix fs_test build with old libc
selftests/landlock: Fix net_test build with old libc
Linus Torvalds [Wed, 14 Feb 2024 23:47:02 +0000 (15:47 -0800)]
Merge tag 'for-6.8-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few regular fixes and one fix for space reservation regression since
6.7 that users have been reporting:
- fix over-reservation of metadata chunks due to not keeping proper
balance between global block reserve and delayed refs reserve; in
practice this leaves behind empty metadata block groups, the
workaround is to reclaim them by using the '-musage=1' balance
filter
- other space reservation fixes:
- do not delete unused block group if it may be used soon
- do not reserve space for checksums for NOCOW files
- fix extent map assertion failure when writing out free space inode
- reject encoded write if inode has nodatasum flag set
- fix chunk map leak when loading block group zone info"
* tag 'for-6.8-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: don't refill whole delayed refs block reserve when starting transaction
btrfs: zoned: fix chunk map leak when loading block group zone info
btrfs: reject encoded write if inode has nodatasum flag set
btrfs: don't reserve space for checksums when writing to nocow files
btrfs: add new unused block groups to the list of unused block groups
btrfs: do not delete unused block group if it may be used soon
btrfs: add and use helper to check if block group is used
btrfs: don't drop extent_map for free space inode on write error
Linus Torvalds [Wed, 14 Feb 2024 23:34:03 +0000 (15:34 -0800)]
Merge tag 'linux_kselftest-kunit-fixes-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit fix from Shuah Khan:
"One important fix to unregister kunit_bus when KUnit module is
unloaded.
Not doing so causes an error when KUnit module tries to re-register
the bus when it gets reloaded"
* tag 'linux_kselftest-kunit-fixes-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: device: Unregister the kunit_bus on shutdown
Commit 8f84780b84d6 ("netfilter: flowtable: allow unidirectional rules")
made unidirectional flow offload possible, while completely ignoring (and
breaking) bidirectional flow offload for nftables.
Add the missing flag that was left out as an exercise for the reader :)
we seem to be DNATing to some random port on the LAN side. While this is
expected if --random is passed to the iptables command, it is not
expected without passing --random. The expected behavior (and the
observed behavior prior to the commit in the "Fixes" tag) is the traffic
will be DNAT'd to 192.168.0.10:21000 unless there is a tuple collision
with that destination. In that case, we expect the traffic to be
instead DNAT'd to 192.168.0.10:21001, so on so forth until the end of
the range.
This patch intends to restore the behavior observed prior to the "Fixes"
tag.
Fixes: 6ed5943f8735 ("netfilter: nat: remove l4 protocol port rovers") Signed-off-by: Kyle Swenson <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
Jann Horn [Wed, 14 Feb 2024 16:05:38 +0000 (17:05 +0100)]
lsm: fix integer overflow in lsm_set_self_attr() syscall
security_setselfattr() has an integer overflow bug that leads to
out-of-bounds access when userspace provides bogus input:
`lctx->ctx_len + sizeof(*lctx)` is checked against `lctx->len` (and,
redundantly, also against `size`), but there are no checks on
`lctx->ctx_len`.
Therefore, userspace can provide an `lsm_ctx` with `->ctx_len` set to a
value between `-sizeof(struct lsm_ctx)` and -1, and this bogus `->ctx_len`
will then be passed to an LSM module as a buffer length, causing LSM
modules to perform out-of-bounds accesses.
The following reproducer will demonstrate this under ASAN (if AppArmor is
loaded as an LSM):
Fixes: a04a1198088a ("LSM: syscalls for current process attributes") Signed-off-by: Jann Horn <[email protected]> Acked-by: Casey Schaufler <[email protected]>
[PM: subj tweak, removed ref to ASAN splat that isn't included] Signed-off-by: Paul Moore <[email protected]>
Kunwu Chan [Mon, 15 Jan 2024 08:28:25 +0000 (16:28 +0800)]
igb: Fix string truncation warnings in igb_set_fw_version
Commit 1978d3ead82c ("intel: fix string truncation warnings")
fixes '-Wformat-truncation=' warnings in igb_main.c by using kasprintf.
drivers/net/ethernet/intel/igb/igb_main.c:3092:53: warning：‘%d’ directive output may be truncated writing between 1 and 5 bytes into a region of size between 1 and 13 [-Wformat-truncation=]
3092 | "%d.%d, 0x%08x, %d.%d.%d",
| ^~
drivers/net/ethernet/intel/igb/igb_main.c:3092:34: note：directive argument in the range [0, 65535]
3092 | "%d.%d, 0x%08x, %d.%d.%d",
| ^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/intel/igb/igb_main.c:3092:34: note：directive argument in the range [0, 65535]
drivers/net/ethernet/intel/igb/igb_main.c:3090:25: note：‘snprintf’ output between 23 and 43 bytes into a destination of size 32
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.
Fix this warning by using a larger space for adapter->fw_version,
and then fall back and continue to use snprintf.
Where that s->saved_cmdlines allocation looks to be a dangling allocation
to kmemleak. That's because kmemleak only keeps track of kmalloc()
allocations. For allocations that use page_alloc() directly, the kmemleak
needs to be explicitly informed about it.
Add kmemleak_alloc() and kmemleak_free() around the page allocation so
that it doesn't give the following false positive:
Paolo Bonzini [Wed, 14 Feb 2024 17:34:58 +0000 (12:34 -0500)]
Merge tag 'kvm-x86-selftests-6.8-rcN' of https://github.com/kvm-x86/linux into HEAD
KVM selftests fixes/cleanups (and one KVM x86 cleanup) for 6.8:
- Remove redundant newlines from error messages.
- Delete an unused variable in the AMX test (which causes build failures when
compiling with -Werror).
- Fail instead of skipping tests if open(), e.g. of /dev/kvm, fails with an
error code other than ENOENT (a Hyper-V selftest bug resulted in an EMFILE,
and the test eventually got skipped).
- Fix TSC related bugs in several Hyper-V selftests.
- Fix a bug in the dirty ring logging test where a sem_post() could be left
pending across multiple runs, resulting in incorrect synchronization between
the main thread and the vCPU worker thread.
- Relax the dirty log split test's assertions on 4KiB mappings to fix false
positives due to the number of mappings for memslot 0 (used for code and
data that is NOT being dirty logged) changing, e.g. due to NUMA balancing.
- Have KVM's gtod_is_based_on_tsc() return "bool" instead of an "int" (the
function generates boolean values, and all callers treat the return value as
a bool).
Paolo Bonzini [Wed, 14 Feb 2024 17:34:43 +0000 (12:34 -0500)]
Merge tag 'kvm-x86-fixes-6.8-rcN' of https://github.com/kvm-x86/linux into HEAD
KVM x86 fixes for 6.8:
- Make a KVM_REQ_NMI request while handling KVM_SET_VCPU_EVENTS if and only
if the incoming events->nmi.pending is non-zero. If the target vCPU is in
the UNITIALIZED state, the spurious request will result in KVM exiting to
userspace, which in turn causes QEMU to constantly acquire and release
QEMU's global mutex, to the point where the BSP is unable to make forward
progress.
- Fix a type (u8 versus u64) goof that results in pmu->fixed_ctr_ctrl being
incorrectly truncated, and ultimately causes KVM to think a fixed counter
has already been disabled (KVM thinks the old value is '0').
- Fix a stack leak in KVM_GET_MSRS where a failed MSR read from userspace
that is ultimately ignored due to ignore_msrs=true doesn't zero the output
as intended.
Few users have observed display corruption when they boot
the machine to KDE Plasma or playing games. We have root
caused the problem that whenever alloc_range() couldn't
find the required memory blocks the function was returning
SUCCESS in some of the corner cases.
The right approach would be if the total allocated size
is less than the required size, the function should
return -ENOSPC.
Maxime Jayat [Mon, 6 Nov 2023 18:01:58 +0000 (19:01 +0100)]
can: netlink: Fix TDCO calculation using the old data bittiming
The TDCO calculation was done using the currently applied data bittiming,
instead of the newly computed data bittiming, which means that the TDCO
had an invalid value unless setting the same data bittiming twice.
Oleksij Rempel [Fri, 20 Oct 2023 13:38:14 +0000 (15:38 +0200)]
can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER)
Lock jsk->sk to prevent UAF when setsockopt(..., SO_J1939_FILTER, ...)
modifies jsk->filters while receiving packets.
Following trace was seen on affected system:
==================================================================
BUG: KASAN: slab-use-after-free in j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939]
Read of size 4 at addr ffff888012144014 by task j1939/350
A reasonable fix is to change j1939_socks_lock to an rwlock, since in
the rare situations where a write lock is required for the linked list
that j1939_socks_lock is protecting, the code does not attempt to
acquire any more locks. This would break the circular lock dependency,
where, for example, the current thread already locks j1939_socks_lock
and attempts to acquire sk_session_queue_lock, and at the same time,
another thread attempts to acquire j1939_socks_lock while holding
sk_session_queue_lock.
NOTE: This patch along does not fix the unregister_netdevice bug
reported by Syzbot; instead, it solves a deadlock situation to prepare
for one or more further patches to actually fix the Syzbot bug, which
appears to be a reference counting problem within the j1939 codebase.
Arnd Bergmann [Tue, 13 Feb 2024 10:16:34 +0000 (11:16 +0100)]
ethernet: cpts: fix function pointer cast warnings
clang-16 warns about the mismatched prototypes for the devm_* callbacks:
drivers/net/ethernet/ti/cpts.c:691:12: error: cast from 'void (*)(struct clk_hw *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
691 | (void(*)(void *))clk_hw_unregister_mux,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/device.h:406:34: note: expanded from macro 'devm_add_action_or_reset'
406 | __devm_add_action_or_reset(dev, action, data, #action)
| ^~~~~~
drivers/net/ethernet/ti/cpts.c:703:12: error: cast from 'void (*)(struct device_node *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
703 | (void(*)(void *))of_clk_del_provider,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/device.h:406:34: note: expanded from macro 'devm_add_action_or_reset'
406 | __devm_add_action_or_reset(dev, action, data, #action)
Use separate helper functions for this instead, using the expected prototypes
with a void* argument.
Fixes: a3047a81ba13 ("net: ethernet: ti: cpts: add support for ext rftclk selection") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Arnd Bergmann [Tue, 13 Feb 2024 10:07:50 +0000 (11:07 +0100)]
bnad: fix work_queue type mismatch
clang-16 warns about a function pointer cast:
drivers/net/ethernet/brocade/bna/bnad.c:1995:4: error: cast from 'void (*)(struct delayed_work *)' to 'work_func_t' (aka 'void (*)(struct work_struct *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
1995 | (work_func_t)bnad_tx_cleanup);
drivers/net/ethernet/brocade/bna/bnad.c:2252:4: error: cast from 'void (*)(void *)' to 'work_func_t' (aka 'void (*)(struct work_struct *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
2252 | (work_func_t)(bnad_rx_cleanup));
The problem here is mixing up work_struct and delayed_work, which relies
the former being the first member of the latter.
Change the code to use consistent types here to address the warning and
make it more robust against workqueue interface changes.
Side note: the use of a delayed workqueue for cleaning up TX descriptors
is probably a bad idea since this introduces a noticeable delay. The
driver currently does not appear to use BQL, but if one wanted to add
that, this would have to be changed as well.
Fixes: 01b54b145185 ("bna: tx rx cleanup fix") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Dmitry Antipov [Mon, 12 Feb 2024 14:34:02 +0000 (17:34 +0300)]
net: smc: fix spurious error message from __sock_release()
Commit 67f562e3e147 ("net/smc: transfer fasync_list in case of fallback")
leaves the socket's fasync list pointer within a container socket as well.
When the latter is destroyed, '__sock_release()' warns about its non-empty
fasync list, which is a dangling pointer to previously freed fasync list
of an underlying TCP socket. Fix this spurious warning by nullifying
fasync list of a container socket.
Fixes: 67f562e3e147 ("net/smc: transfer fasync_list in case of fallback") Signed-off-by: Dmitry Antipov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
David S. Miller [Wed, 14 Feb 2024 10:37:33 +0000 (10:37 +0000)]
Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-02-12 (i40e)
This series contains updates to i40e driver only.
Ivan Vecera corrects the looping value used while waiting for queues to
be disabled as well as an incorrect mask being used for DCB
configuration.
Maciej resolves an issue related to XDP traffic; removing a double call to
i40e_pf_rxq_wait() and accounting for XDP rings when stopping rings.
====================
octeontx2-af: Remove the PF_FUNC validation for NPC transmit rules
NPC transmit side mcam rules can use the pcifunc (in packet metadata
added by hardware) of transmitting device for mcam lookup similar to
the channel of receiving device at receive side.
The commit 18603683d766 ("octeontx2-af: Remove channel verification
while installing MCAM rules") removed the receive side channel
verification to save hardware MCAM filters while switching packets
across interfaces but missed removing transmit side checks.
This patch removes transmit side rules validation.
Fixes: 18603683d766 ("octeontx2-af: Remove channel verification while installing MCAM rules") Signed-off-by: Subbaraya Sundeep <[email protected]> Signed-off-by: David S. Miller <[email protected]>
ALSA: hda/realtek: cs35l41: Fix device ID / model name
The patch 51d976079976c800ef19ed1b542602fcf63f0edb ("ALSA: hda/realtek:
Add quirks for ASUS Zenbook 2022 Models") modified the entry 1043:1e2e
from "ASUS UM3402" to "ASUS UM6702RA/RC" and added another entry for
"ASUS UM3402" with 104e:1ee2.
The first entry was correct, while the new one corresponds to model
"ASUS UM6702RA/RC"
Fix the model names for both devices.
projects / linux.git / log