Mathew King [Mon, 20 May 2019 22:41:24 +0000 (16:41 -0600)]
platform/x86: intel-vbtn: Report switch events when event wakes device
When a switch event, such as tablet mode/laptop mode or docked/undocked,
wakes a device make sure that the value of the swich is reported.
Without when a device is put in tablet mode from laptop mode when it is
suspended or vice versa the device will wake up but mode will be
incorrect.
Tested by suspending a device in laptop mode and putting it in tablet
mode, the device resumes and is in tablet mode. When suspending the
device in tablet mode and putting it in laptop mode the device resumes
and is in laptop mode.
Hans de Goede [Wed, 12 Jun 2019 07:02:02 +0000 (09:02 +0200)]
platform/x86: asus-wmi: Only Tell EC the OS will handle display hotkeys from asus_nb_wmi
Commit 78f3ac76d9e5 ("platform/x86: asus-wmi: Tell the EC the OS will
handle the display off hotkey") causes the backlight to be permanently off
on various EeePC laptop models using the eeepc-wmi driver (Asus EeePC
1015BX, Asus EeePC 1025C).
The asus_wmi_set_devstate(ASUS_WMI_DEVID_BACKLIGHT, 2, NULL) call added
by that commit is made conditional in this commit and only enabled in
the quirk_entry structs in the asus-nb-wmi driver fixing the broken
display / backlight on various EeePC laptop models.
Cc: João Paulo Rechi Vita <[email protected]> Fixes: 78f3ac76d9e5 ("platform/x86: asus-wmi: Tell the EC the OS will handle the display off hotkey") Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]>
Prarit Bhargava [Mon, 10 Jun 2019 17:15:44 +0000 (13:15 -0400)]
x86/resctrl: Prevent NULL pointer dereference when local MBM is disabled
Booting with kernel parameter "rdt=cmt,mbmtotal,memlocal,l3cat,mba" and
executing "mount -t resctrl resctrl -o mba_MBps /sys/fs/resctrl" results in
a NULL pointer dereference on systems which do not have local MBM support
enabled..
James Morse [Mon, 3 Jun 2019 17:25:31 +0000 (18:25 +0100)]
x86/resctrl: Don't stop walking closids when a locksetup group is found
When a new control group is created __init_one_rdt_domain() walks all
the other closids to calculate the sets of used and unused bits.
If it discovers a pseudo_locksetup group, it breaks out of the loop. This
means any later closid doesn't get its used bits added to used_b. These
bits will then get set in unused_b, and added to the new control group's
configuration, even if they were marked as exclusive for a later closid.
When encountering a pseudo_locksetup group, we should continue. This is
because "a resource group enters 'pseudo-locked' mode after the schemata is
written while the resource group is in 'pseudo-locksetup' mode." When we
find a pseudo_locksetup group, its configuration is expected to be
overwritten, we can skip it.
Robin Murphy [Mon, 3 Jun 2019 12:15:37 +0000 (14:15 +0200)]
iommu/arm-smmu: Avoid constant zero in TLBI writes
Apparently, some Qualcomm arm64 platforms which appear to expose their
SMMU global register space are still, in fact, using a hypervisor to
mediate it by trapping and emulating register accesses. Sadly, some
deployed versions of said trapping code have bugs wherein they go
horribly wrong for stores using r31 (i.e. XZR/WZR) as the source
register.
While this can be mitigated for GCC today by tweaking the constraints
for the implementation of writel_relaxed(), to avoid any potential
arms race with future compilers more aggressively optimising register
allocation, the simple way is to just remove all the problematic
constant zeros. For the write-only TLB operations, the actual value is
irrelevant anyway and any old nearby variable will provide a suitable
GPR to encode. The one point at which we really do need a zero to clear
a context bank happens before any of the TLB maintenance where crashes
have been reported, so is apparently not a problem... :/
Ville Syrjälä [Tue, 9 Apr 2019 14:40:49 +0000 (17:40 +0300)]
drm/i915/sdvo: Implement proper HDMI audio support for SDVO
Our SDVO audio support is pretty bogus. We can't push audio over the
SDVO bus, so trying to enable audio in the SDVO control register doesn't
do anything. In fact it looks like the SDVO encoder will always mix in
the audio coming over HDA, and there's no (at least documented) way to
disable that from our side. So HDMI audio does work currently on gen4
but only by luck really. On gen3 it got broken by the referenced commit.
And what has always been missing on every platform is the ELD.
To pass the ELD to the audio driver we need to write it to magic buffer
in the SDVO encoder hardware which then gets pulled out via HDA in the
other end. Ie. pretty much the same thing we had for native HDMI before
we started to just pass the ELD between the drivers. This sort of
explains why we even have that silly hardware buffer with native HDMI.
$ cat /proc/asound/card0/eld#1.0
-monitor_present 0
-eld_valid 0
+monitor_present 1
+eld_valid 1
+monitor_name LG TV
+connection_type HDMI
+...
This also fixes our state readout since we can now query the SDVO
encoder about the state of the "ELD valid" and "presence detect"
bits. As mentioned those don't actually control whether audio
gets sent over the HDMI cable, but it's the best we can do. And with
the state checker appeased we can re-enable HDMI audio for gen3.
Ville Syrjälä [Mon, 3 Jun 2019 14:25:00 +0000 (17:25 +0300)]
drm/i915: Fix per-pixel alpha with CCS
We forgot to set .has_alpha=true for the A+CCS formats when the code
started to consult .has_alpha. This manifests as A+CCS being treated
as X+CCS which means no per-pixel alpha blending. Fix the format
list appropriately.
Lucas De Marchi [Wed, 5 Jun 2019 23:55:35 +0000 (16:55 -0700)]
drm/i915/dmc: protect against reading random memory
While loading the DMC firmware we were double checking the headers made
sense, but in no place we checked that we were actually reading memory
we were supposed to. This could be wrong in case the firmware file is
truncated or malformed.
Before this patch:
# ls -l /lib/firmware/i915/icl_dmc_ver1_07.bin
-rw-r--r-- 1 root root 25716 Feb 1 12:26 icl_dmc_ver1_07.bin
# truncate -s 25700 /lib/firmware/i915/icl_dmc_ver1_07.bin
# modprobe i915
# dmesg| grep -i dmc
[drm:intel_csr_ucode_init [i915]] Loading i915/icl_dmc_ver1_07.bin
[drm] Finished loading DMC firmware i915/icl_dmc_ver1_07.bin (v1.7)
i.e. it loads random data. Now it fails like below:
[drm:intel_csr_ucode_init [i915]] Loading i915/icl_dmc_ver1_07.bin
[drm:csr_load_work_fn [i915]] *ERROR* Truncated DMC firmware, rejecting.
i915 0000:00:02.0: Failed to load DMC firmware i915/icl_dmc_ver1_07.bin. Disabling runtime power management.
i915 0000:00:02.0: DMC firmware homepage: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915
Before reading any part of the firmware file, validate the input first.
Hans de Goede [Fri, 24 May 2019 17:40:27 +0000 (19:40 +0200)]
drm/i915/dsi: Use a fuzzy check for burst mode clock check
Prior to this commit we fail to init the DSI panel on the GPD MicroPC:
https://www.indiegogo.com/projects/gpd-micropc-6-inch-handheld-industry-laptop#/
The problem is intel_dsi_vbt_init() failing with the following error:
*ERROR* Burst mode freq is less than computed
The pclk in the VBT panel modeline is 70000, together with 24 bpp and
4 lines this results in a bitrate value of 70000 * 24 / 4 = 420000.
But the target_burst_mode_freq in the VBT is 418000.
This commit works around this problem by adding an intel_fuzzy_clock_check
when target_burst_mode_freq < bitrate and setting target_burst_mode_freq to
bitrate when that checks succeeds, fixing the panel not working.
Linus Torvalds [Wed, 12 Jun 2019 01:27:57 +0000 (15:27 -1000)]
Merge tag 'vfio-v5.2-rc5' of git://github.com/awilliam/linux-vfio
Pull VFIO fixes from Alex Williamson:
"Fix mdev device create/remove paths to provide initialized device for
parent driver create callback and correct ordering of device removal
from bus prior to initiating removal by parent.
Also resolve races between parent removal and device create/remove
paths (all from Parav Pandit)"
* tag 'vfio-v5.2-rc5' of git://github.com/awilliam/linux-vfio:
vfio/mdev: Synchronize device create/remove with parent removal
vfio/mdev: Avoid creating sysfs remove file on stale device removal
vfio/mdev: Improve the create/remove sequence
Linus Torvalds [Wed, 12 Jun 2019 01:10:15 +0000 (15:10 -1000)]
Merge tag 'for-5.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"One regression fix to TRIM ioctl.
The range cannot be used as its meaning can be confusing regarding
physical and logical addresses. This confusion in code led to
potential corruptions when the range overlapped data.
The original patch made it to several stable kernels and was promptly
reverted, the version for master branch is different due to additional
changes but the change is effectively the same"
* tag 'for-5.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: Always trim all unallocated space in btrfs_trim_free_extents
Jann Horn [Wed, 29 May 2019 11:31:57 +0000 (13:31 +0200)]
ptrace: restore smp_rmb() in __ptrace_may_access()
Restore the read memory barrier in __ptrace_may_access() that was deleted
a couple years ago. Also add comments on this barrier and the one it pairs
with to explain why they're there (as far as I understand).
Shirish S [Tue, 4 Jun 2019 15:55:03 +0000 (21:25 +0530)]
drm/amdgpu/{uvd,vcn}: fetch ring's read_ptr after alloc
[What]
readptr read always returns zero, since most likely
these blocks are either power or clock gated.
[How]
fetch rptr after amdgpu_ring_alloc() which informs
the power management code that the block is about to be
used and hence the gating is turned off.
ALSA: ice1712: Check correct return value to snd_i2c_sendbytes (EWS/DMX 6Fire)
Check for exact and correct return value to snd_i2c_sendbytes
call for EWS/DMX 6Fire (snd_ice1712).
Fixes a systemic error on every boot starting from kernel 5.1
onwards to snd_ice1712 driver ("cannot send pca") on Terratec
EWS/DMX 6Fire PCI soundcards.
Check for exact and correct return value to snd_i2c_sendbytes
call for EWS/DMX 6Fire (snd_ice1712).
Fixes a systemic error on every boot to snd_ice1712 driver
("cannot send pca") on Terratec EWS/DMX 6Fire PCI soundcards.
Stanton SCS.1m can transfer isochronous packet with Multi Bit Linear
Audio data channels, therefore it allows software to capture PCM
substream. However, ALSA oxfw driver doesn't.
This commit changes the driver to add one PCM substream for capture
direction.
Linus Torvalds [Mon, 10 Jun 2019 17:35:55 +0000 (07:35 -1000)]
Merge tag 'regulator-fix-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"Just one driver specific fix here, for a boot regression introduced
during some modernization work on the tps6507x driver"
* tag 'regulator-fix-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: tps6507x: Fix boot regression due to testing wrong init_data pointer
Linus Torvalds [Mon, 10 Jun 2019 17:19:56 +0000 (07:19 -1000)]
Merge tag 'spi-fix-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small set of fixes here.
One core fix for error handling when we fail to set up the hardware
before initiating a transfer and another one reverting a change in the
core which broke Raspberry Pi in common use cases as part of some
optimization work.
There's also a couple of driver specific fixes"
* tag 'spi-fix-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: abort spi_sync if failed to prepare_transfer_hardware
spi: spi-fsl-spi: call spi_finalize_current_message() at the end
spi: bitbang: Fix NULL pointer dereference in spi_unregister_master
spi: Fix Raspberry Pi breakage
While adding handling for dying task group leaders c03cd7738a83
("cgroup: Include dying leaders with live threads in PROCS
iterations") added an inverted cset skip condition to
css_task_iter_advance_css_set(). It should skip cset if it's
completely empty but was incorrectly testing for the inverse condition
for the dying_tasks list. Fix it.
Signed-off-by: Tejun Heo <[email protected]> Fixes: c03cd7738a83 ("cgroup: Include dying leaders with live threads in PROCS iterations") Reported-by: [email protected]
Neil Armstrong [Wed, 5 Jun 2019 15:02:33 +0000 (17:02 +0200)]
drm/panfrost: make devfreq optional again
Devfreq runtime usage was made mandatory, thus making panfrost fail to probe
on Amlogic S912 SoCs missing the "operating-points-v2" property.
Make it optional again, leaving PM_DEVFREQ selected by default.
Boris Brezillon [Wed, 29 May 2019 06:51:21 +0000 (08:51 +0200)]
drm/gem_shmem: Use a writecombine mapping for ->vaddr
Right now, the BO is mapped as a cached region when ->vmap() is called
and the underlying object is not a dmabuf.
Doing that makes cache management a bit more complicated (you'd need
to call dma_map/unmap_sg() on the ->sgt field everytime the BO is about
to be passed to the GPU/CPU), so let's map the BO with writecombine
attributes instead (as done in most drivers).
ASoC: core: Fix deadlock in snd_soc_instantiate_card()
Move the client_mutex lock to snd_soc_unbind_card() before
removing link components. This prevents the deadlock
in the error path in snd_soc_instantiate_card().
Fixes: 34ac3c3eb8 (ASoC: core: lock client_mutex while removing
link components) Reported-by: kernelci.org bot <[email protected]> Signed-off-by: Ranjani Sridharan <[email protected]> Signed-off-by: Mark Brown <[email protected]>
Jens Axboe [Mon, 10 Jun 2019 09:35:41 +0000 (03:35 -0600)]
cgroup/bfq: revert bfq.weight symlink change
There's some discussion on how to do this the best, and Tejun prefers
that BFQ just create the file itself instead of having cgroups support
a symlink feature.
Hence revert commit 54b7b868e826 and 19e9da9e86c4 for 5.2, and this
can be done properly for 5.3.
Linus Torvalds [Sat, 8 Jun 2019 22:57:35 +0000 (15:57 -0700)]
Merge tag 'ceph-for-5.2-rc4' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A change to call iput() asynchronously to avoid a possible deadlock
when iput_final() needs to wait for in-flight I/O (e.g. readahead) and
a fixup for a cleanup that went into -rc1"
* tag 'ceph-for-5.2-rc4' of git://github.com/ceph/ceph-client:
ceph: fix error handling in ceph_get_caps()
ceph: avoid iput_final() while holding mutex or in dispatch thread
ceph: single workqueue for inode related works
Linus Torvalds [Sat, 8 Jun 2019 20:16:05 +0000 (13:16 -0700)]
Merge tag 'for-linus-5.2b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"Just one fix for the Xen block frontend driver avoiding allocations
with order > 0"
* tag 'for-linus-5.2b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen-blkfront: switch kcalloc to kvcalloc for large array allocation
Linus Torvalds [Sat, 8 Jun 2019 20:12:54 +0000 (13:12 -0700)]
Merge tag 's390-5.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- fix stack unwinder: the stack unwinder rework has on off-by-one bug
which prevents following stack backchains over more than one context
(e.g. irq -> process).
- fix address space detection in exception handler: if user space
switches to access register mode, which is not supported anymore, the
exception handler may resolve to the wrong address space.
* tag 's390-5.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/unwind: correct stack switching during unwind
s390/mm: fix address space detection in exception handling
Linus Torvalds [Sat, 8 Jun 2019 20:09:31 +0000 (13:09 -0700)]
Merge tag 'mips_fixes_5.2_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Paul Burton:
- Declare ginvt() __always_inline due to its use of an argument as an
inline asm immediate.
- A VDSO build fix following Kbuild changes made this cycle.
- A fix for boot failures on txx9 systems following memory
initialization changes made this cycle.
- Bounds check virt_addr_valid() to prevent it spuriously indicating
that bogus addresses are valid, in turn fixing hardened usercopy
failures that have been present since v4.12.
- Build uImage.gz for pistachio systems by default, since this is the
image we need in order to actually boot on a board.
- Remove an unused variable in our uprobes code.
* tag 'mips_fixes_5.2_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: uprobes: remove set but not used variable 'epc'
MIPS: pistachio: Build uImage.gz by default
MIPS: Make virt_addr_valid() return bool
MIPS: Bounds check virt_addr_valid
MIPS: TXx9: Fix boot crash in free_initmem()
MIPS: remove a space after -I to cope with header search paths for VDSO
MIPS: mark ginvt() as __always_inline
Linus Torvalds [Sat, 8 Jun 2019 19:52:42 +0000 (12:52 -0700)]
Merge tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull yet more SPDX updates from Greg KH:
"Another round of SPDX header file fixes for 5.2-rc4
These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being
added, based on the text in the files. We are slowly chipping away at
the 700+ different ways people tried to write the license text. All of
these were reviewed on the spdx mailing list by a number of different
people.
We now have over 60% of the kernel files covered with SPDX tags:
$ ./scripts/spdxcheck.py -v 2>&1 | grep Files
Files checked: 64533
Files with SPDX: 40392
Files with errors: 0
I think the majority of the "easy" fixups are now done, it's now the
start of the longer-tail of crazy variants to wade through"
* tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (159 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 449
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 448
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 444
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 443
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 442
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 438
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 437
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 436
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 435
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 434
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 433
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 432
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 431
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 430
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 429
...
Linus Torvalds [Sat, 8 Jun 2019 19:50:36 +0000 (12:50 -0700)]
Merge tag 'char-misc-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char and misc driver fixes for 5.2-rc4 to resolve
a number of reported issues.
The most "notable" one here is the kernel headers in proc^Wsysfs
fixes. Those changes move the header file info into sysfs and fixes
the build issues that you reported.
Other than that, a bunch of small habanalabs driver fixes, some fpga
driver fixes, and a few other tiny driver fixes.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
habanalabs: Read upper bits of trace buffer from RWPHI
habanalabs: Fix virtual address access via debugfs for 2MB pages
fpga: zynqmp-fpga: Correctly handle error pointer
habanalabs: fix bug in checking huge page optimization
habanalabs: Avoid using a non-initialized MMU cache mutex
habanalabs: fix debugfs code
uapi/habanalabs: add opcode for enable/disable device debug mode
habanalabs: halt debug engines on user process close
test_firmware: Use correct snprintf() limit
genwqe: Prevent an integer overflow in the ioctl
parport: Fix mem leak in parport_register_dev_model
fpga: dfl: expand minor range when registering chrdev region
fpga: dfl: Add lockdep classes for pdata->lock
fpga: dfl: afu: Pass the correct device to dma_mapping_error()
fpga: stratix10-soc: fix use-after-free on s10_init()
w1: ds2408: Fix typo after 49695ac46861 (reset on output_write retry with readback)
kheaders: Do not regenerate archive if config is not changed
kheaders: Move from proc to sysfs
lkdtm/bugs: Adjust recursion test to avoid elision
lkdtm/usercopy: Moves the KERNEL_DS test to non-canonical
Linus Torvalds [Sat, 8 Jun 2019 19:48:49 +0000 (12:48 -0700)]
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"I2C has a driver bugfix and a MAINTAINERS fix"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: Karthikeyan Ramasubramanian is MIA
i2c: xiic: Add max_read_len quirk
Linus Torvalds [Sat, 8 Jun 2019 19:46:31 +0000 (12:46 -0700)]
Merge tag 'dmaengine-fix-5.2-rc4' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
- jz4780 transfer fix for acking descriptors early
- fsl-qdma: clean registers on error
- dw-axi-dmac: null pointer dereference fix
- mediatek-cqdma: fix sleeping in atomic context
- tegra210-adma: fix bunch os issues like crashing in driver probe,
channel FIFO configuration etc.
- sprd: Fixes for possible crash on descriptor status, block length
overflow. For 2-stage transfer fix incorrect start, configuration and
interrupt handling.
* tag 'dmaengine-fix-5.2-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: sprd: Add interrupt support for 2-stage transfer
dmaengine: sprd: Fix the right place to configure 2-stage transfer
dmaengine: sprd: Fix block length overflow
dmaengine: sprd: Fix the incorrect start for 2-stage destination channels
dmaengine: sprd: Add validation of current descriptor in irq handler
dmaengine: sprd: Fix the possible crash when getting descriptor status
dmaengine: tegra210-adma: Fix spelling
dmaengine: tegra210-adma: Fix channel FIFO configuration
dmaengine: tegra210-adma: Fix crash during probe
dmaengine: mediatek-cqdma: sleeping in atomic context
dmaengine: dw-axi-dmac: fix null dereference when pointer first is null
dmaengine: fsl-qdma: Add improvement
dmaengine: jz4780: Fix transfers being ACKed too soon
- Remove redundant unlikely() check on IS_ERR() (Kefeng)
- Fixup request freeing on exit (Ming)
* tag 'for-linus-20190608' of git://git.kernel.dk/linux-block:
block, bfq: add weight symlink to the bfq.weight cgroup parameter
cgroup: let a symlink too be created with a cftype file
block: free sched's request pool in blk_cleanup_queue
nvme-rdma: use dynamic dma mapping per command
nvme: Fix u32 overflow in the number of namespace list calculation
mmc: also set max_segment_size in the device
mtip32xx: also set max_segment_size in the device
rsxx: don't call dma_set_max_seg_size
nvme-pci: don't limit DMA segement size
block: Drop unlikely before IS_ERR(_OR_NULL)
block: aoe: no need to check return value of debugfs_create functions
nvmet: fix data_len to 0 for bdev-backed write_zeroes
MAINTAINERS: Hand over skd maintainership
nvme-tcp: fix queue mapping when queue count is limited
nvme-rdma: fix queue mapping when queue count is limited
Linus Torvalds [Sat, 8 Jun 2019 18:54:17 +0000 (11:54 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two bug fixes, both for fairly serious problems; the UFS one looks
like it could be used to exfiltrate data from the kernel, although
probably only a privileged user has access to the command management
interface and the missing unlock in smartpqi is long standing and
probably a little used error path"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: smartpqi: unlock on error in pqi_submit_raid_request_synchronous()
scsi: ufs: Check that space was properly alloced in copy_query_response
Linus Torvalds [Sat, 8 Jun 2019 17:57:32 +0000 (10:57 -0700)]
Merge tag 'linux-kselftest-5.2-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fix from Shuah Khan:
"This consists of a single fix for a vm test build failure regression
when it is built by itself"
* tag 'linux-kselftest-5.2-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: vm: Fix test build failure when built by itself
Hans de Goede [Fri, 24 May 2019 12:57:59 +0000 (14:57 +0200)]
drm: panel-orientation-quirks: Add quirk for GPD MicroPC
GPD has done it again, make a nice device (good), use way too generic
DMI strings (bad) and use a portrait screen rotated 90 degrees (ugly).
Because of the too generic DMI strings this entry is also doing bios-date
matching, so the gpd_micropc data struct may very well need to be updated
with some extra bios-dates in the future.
Hans de Goede [Fri, 24 May 2019 12:57:58 +0000 (14:57 +0200)]
drm: panel-orientation-quirks: Add quirk for GPD pocket2
GPD has done it again, make a nice device (good), use way too generic
DMI strings (bad) and use a portrait screen rotated 90 degrees (ugly).
Because of the too generic DMI strings this entry is also doing bios-date
matching, so the gpd_pocket2 data struct may very well need to be updated
with some extra bios-dates in the future.
Changes in v2:
-Add one more known BIOS date to the list of BIOS dates
x86/fpu: Update kernel's FPU state before using for the fsave header
In commit
39388e80f9b0c ("x86/fpu: Don't save fxregs for ia32 frames in copy_fpstate_to_sigframe()")
I removed the statement
| if (ia32_fxstate)
| copy_fxregs_to_kernel(fpu);
and argued that it was wrongly merged because the content was already
saved in kernel's state.
This was wrong: It is required to write it back because it is only
saved on the user-stack and save_fsave_header() reads it from task's
FPU-state. I missed that part…
Save x87 FPU state unless thread's FPU registers are already up to date.
Linus Torvalds [Sat, 8 Jun 2019 00:39:31 +0000 (17:39 -0700)]
Merge tag 'drm-fixes-2019-06-07-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"A small bit more lively this week but not majorly so. I'm away in
Japan next week for family holiday, so I'll be pretty disconnected,
I've asked Daniel to do fixes for the week while I'm out.
The nouveau firmware changes are a bit large, but they address a big
problem where a whole set of boards don't load with the driver, and
the new firmware fixes that, so I think it's worth trying to land it
now.
core:
- Allow fb changes in async commits (drivers as well)
udmabuf:
- Unmap scatterlist when unmapping udmabuf
nouveau:
- firmware loading fixes for secboot firmware on new GPU revision.
komeda:
- oops, dma mapping and warning fixes
arm-hdlcd:
- clock fixes
- mode validation fix
i915:
- Add a missing Icelake workaround
- GVT - DMA map fault fix and enforcement fixes
amdgpu:
- DCE resume fix
- New raven variation updates"
* tag 'drm-fixes-2019-06-07-1' of git://anongit.freedesktop.org/drm/drm: (33 commits)
drm/nouveau/secboot/gp10[2467]: support newer FW to fix SEC2 failures on some boards
drm/nouveau/secboot: enable loading of versioned LS PMU/SEC2 ACR msgqueue FW
drm/nouveau/secboot: split out FW version-specific LS function pointers
drm/nouveau/secboot: pass max supported FW version to LS load funcs
drm/nouveau/core: support versioned firmware loading
drm/nouveau/core: pass subdev into nvkm_firmware_get, rather than device
drm/komeda: Potential error pointer dereference
drm/komeda: remove set but not used variable 'kcrtc'
drm/amd/amdgpu: add RLC firmware to support raven1 refresh
drm/amd/powerplay: add set_power_profile_mode for raven1_refresh
drm/amdgpu: fix ring test failure issue during s3 in vce 3.0 (V2)
udmabuf: actually unmap the scatterlist
drm/arm/hdlcd: Allow a bit of clock tolerance
drm/arm/hdlcd: Actually validate CRTC modes
drm/arm/mali-dp: Add a loop around the second set CVAL and try 5 times
drm/komeda: fixing of DMA mapping sg segment warning
drm: don't block fb changes for async plane updates
drm/vc4: fix fb references in async update
drm/msm: fix fb references in async update
drm/amd: fix fb references in async update
...
Robert Hancock [Tue, 4 Jun 2019 21:55:51 +0000 (15:55 -0600)]
i2c: xiic: Add max_read_len quirk
This driver does not support reading more than 255 bytes at once because
the register for storing the number of bytes to read is only 8 bits. Add
a max_read_len quirk to enforce this.
This was found when using this driver with the SFP driver, which was
previously reading all 256 bytes in the SFP EEPROM in one transaction.
This caused a bunch of hard-to-debug errors in the xiic driver since the
driver/logic was treating the number of bytes to read as zero.
Rejecting transactions that aren't supported at least allows the problem
to be diagnosed more easily.
24 bit expanders use REG_ADDR_AI in combination with register addressing. This
conflicts with regmap which takes this bit as part of the register number,
i.e. a second cache entry is defined for accessed with REG_ADDR_AI being
set although on the chip it is the same register as with REG_ADDR_AI being
cleared.
The problem was introduced by
commit b32cecb46bdc ("gpio: pca953x: Extract the register address mangling to single function")
but only became visible by
commit 8b9f9d4dc511 ("regmap: verify if register is writeable before writing operations")
because before, the regmap size was effectively ignored and
pca953x_writeable_register() did know to ignore REG_ADDR_AI. Still, there
were two separate cache entries created.
Since the use of REG_ADDR_AI seems to be static we can work around this
issue by simply increasing the size of the regmap to cover the "virtual"
registers with REG_ADDR_AI being set. This only means that half of the
regmap buffer will be unused.
Cong Wang [Tue, 16 Apr 2019 21:33:51 +0000 (14:33 -0700)]
RAS/CEC: Convert the timer callback to a workqueue
cec_timer_fn() is a timer callback which reads ce_arr.array[] and
updates its decay values. However, it runs in interrupt context and the
mutex protection the CEC uses for that array, is inadequate. Convert the
used timer to a workqueue to keep the tasks the CEC performs preemptible
and thus low-prio.
[ bp: Rewrite commit message.
s/timer/decay/gi to make it agnostic as to what facility is used. ]
Switch to using Donald Knuth's binary search algorithm (The Art of
Computer Programming, vol. 3, section 6.2.1). This should've been done
from the very beginning but the author must've been smoking something
very potent at the time.
The problem with the current one was that it would return the wrong
element index in certain situations:
Baoquan He [Thu, 23 May 2019 02:57:44 +0000 (10:57 +0800)]
x86/mm/KASLR: Compute the size of the vmemmap section properly
The size of the vmemmap section is hardcoded to 1 TB to support the
maximum amount of system RAM in 4-level paging mode - 64 TB.
However, 1 TB is not enough for vmemmap in 5-level paging mode. Assuming
the size of struct page is 64 Bytes, to support 4 PB system RAM in 5-level,
64 TB of vmemmap area is needed:
This hardcoding may cause vmemmap to corrupt the following
cpu_entry_area section, if KASLR puts vmemmap very close to it and the
actual vmemmap size is bigger than 1 TB.
So calculate the actual size of the vmemmap region needed and then align
it up to 1 TB boundary.
In 4-level paging mode it is always 1 TB. In 5-level it's adjusted on
demand. The current code reserves 0.5 PB for vmemmap on 5-level. With
this change, the space can be saved and thus used to increase entropy
for the randomization.
[ bp: Spell out how the 64 TB needed for vmemmap is computed and massage commit
message. ]
Linus Torvalds [Fri, 7 Jun 2019 20:38:53 +0000 (13:38 -0700)]
Merge tag 'hwmon-for-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Fix a couple of inconsistencies and locking problems in pmbus driver
- Register with thermal subsystem only on systems supporting devicetree
* tag 'hwmon-for-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (pmbus/core) Treat parameters as paged if on multiple pages
hwmon: (pmbus/core) mutex_lock write in pmbus_set_samples
hwmon: (core) add thermal sensors only if dev->of_node is present
Jan Glauber [Wed, 5 Jun 2019 13:48:49 +0000 (15:48 +0200)]
lockref: Limit number of cmpxchg loop retries
The lockref cmpxchg loop is unbound as long as the spinlock is not
taken. Depending on the hardware implementation of compare-and-swap
a high number of loop retries might happen.
Add an upper bound to the loop to force the fallback to spinlocks
after some time. A retry value of 100 should not impact any hardware
that does not have this issue.
With the retry limit the performance of an open-close testcase
improved between 60-70% on ThunderX2.
Architectures that support memory tagging have a need to perform untagging
(stripping the tag) in various parts of the kernel. This patch adds an
untagged_addr() macro, which is defined as noop for architectures that do
not support memory tagging. The oncoming patch series will define it at
least for sparc64 and arm64.
Jens Axboe [Fri, 7 Jun 2019 20:04:28 +0000 (14:04 -0600)]
Merge branch 'nvme-5.2-rc-next' of git://git.infradead.org/nvme into for-linus
Pull NVMe fixes from Sagi.
* 'nvme-5.2-rc-next' of git://git.infradead.org/nvme:
nvme-rdma: use dynamic dma mapping per command
nvme: Fix u32 overflow in the number of namespace list calculation
nvmet: fix data_len to 0 for bdev-backed write_zeroes
nvme-tcp: fix queue mapping when queue count is limited
nvme-rdma: fix queue mapping when queue count is limited
Linus Torvalds [Fri, 7 Jun 2019 18:59:20 +0000 (11:59 -0700)]
Merge tag 'kbuild-fixes-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild fixes from Masahiro Yamada:
- fix kselftest-merge to find config fragments in deeper directories
- fix kconfig unit test, which was broken by SPDX tag addition
- add + prefix to buildtar to suppress jobserver unavailable warning
- fix checkstack.pl to recognize arch=arm64
- suppress noisy warning from cc-cross-prefix
* tag 'kbuild-fixes-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: use more portable 'command -v' for cc-cross-prefix
scripts/checkstack.pl: Fix arm64 wrong or unknown architecture
kbuild: tar-pkg: enable communication with jobserver
kconfig: tests: fix recursive inclusion unit test
kbuild: teach kselftest-merge to find nested config files
Linus Torvalds [Fri, 7 Jun 2019 18:36:17 +0000 (11:36 -0700)]
Merge tag 'pm-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a crash during resume from hibernation introduced during the
4.19 cycle, cause the new Performance and Energy Bias Hint (EPB) code
to be built only if CONFIG_PM is set and add a few missing kerneldoc
comments.
Specifics:
- Fix a crash that occurs when a kernel with 'nosmt' in the command
line is used to resume the system from hibernation (as the
"restore" kernel), because memory mapping differences between the
restore and image kernels cause SMT siblings to be woken up from
idle states and subsequently they try to fetch instructions from
incorrect memory locations (Jiri Kosina).
- Cause the new Performance and Energy Bias Hint (EPB) code to be
built only if CONFIG_PM is set, because that code is not really
necessary otherwise (Rafael Wysocki).
- Add kerneldoc comments to documents some helper functions related
to system-wide suspend to avoid possible confusion regarding their
purpose (Rafael Wysocki)"
* tag 'pm-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
x86/power: Fix 'nosmt' vs hibernation triple fault during resume
PM: sleep: Add kerneldoc comments to some functions
x86: intel_epb: Do not build when CONFIG_PM is unset
Jann Horn [Sun, 2 Jun 2019 01:15:58 +0000 (03:15 +0200)]
x86/insn-eval: Fix use-after-free access to LDT entry
get_desc() computes a pointer into the LDT while holding a lock that
protects the LDT from being freed, but then drops the lock and returns the
(now potentially dangling) pointer to its caller.
Fix it by giving the caller a copy of the LDT entry instead.
1) Free AF_PACKET po->rollover properly, from Willem de Bruijn.
2) Read SFP eeprom in max 16 byte increments to avoid problems with
some SFP modules, from Russell King.
3) Fix UDP socket lookup wrt. VRF, from Tim Beale.
4) Handle route invalidation properly in s390 qeth driver, from Julian
Wiedmann.
5) Memory leak on unload in RDS, from Zhu Yanjun.
6) sctp_process_init leak, from Neil HOrman.
7) Fix fib_rules rule insertion semantic change that broke Android,
from Hangbin Liu.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits)
pktgen: do not sleep with the thread lock held.
net: mvpp2: Use strscpy to handle stat strings
net: rds: fix memory leak in rds_ib_flush_mr_pool
ipv6: fix EFAULT on sendto with icmpv6 and hdrincl
ipv6: use READ_ONCE() for inet->hdrincl as in ipv4
Revert "fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not supplied"
net: aquantia: fix wol configuration not applied sometimes
ethtool: fix potential userspace buffer overflow
Fix memory leak in sctp_process_init
net: rds: fix memory leak when unload rds_rdma
ipv6: fix the check before getting the cookie in rt6_get_cookie
ipv4: not do cache for local delivery if bc_forwarding is enabled
s390/qeth: handle error when updating TX queue count
s390/qeth: fix VLAN attribute in bridge_hostnotify udev event
s390/qeth: check dst entry before use
s390/qeth: handle limited IPv4 broadcast in L3 TX path
net: fix indirect calls helpers for ptype list hooks.
net: ipvlan: Fix ipvlan device tso disabled while NETIF_F_IP_CSUM is set
udp: only choose unbound UDP socket for multicast when not in a VRF
net/tls: replace the sleeping lock around RX resync with a bit lock
...
Linus Torvalds [Fri, 7 Jun 2019 16:25:27 +0000 (09:25 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Things are looking pretty quiet here in RDMA, not too many bug fixes
rolling in right now. The usual driver bug fixes and fixes for a
couple of regressions introduced in 5.2:
- Fix a race on bootup with RDMA device renaming and srp. SRP also
needs to rename its internal sys files
- Fix a memory leak in hns
- Don't leak resources in efa on certain error unwinds
- Don't panic in certain error unwinds in ib_register_device
- Various small user visible bug fix patches for the hfi and efa
drivers
- Fix the 32 bit compilation break"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/efa: Remove MAYEXEC flag check from mmap flow
mlx5: avoid 64-bit division
IB/hfi1: Validate page aligned for a given virtual address
IB/{qib, hfi1, rdmavt}: Correct ibv_devinfo max_mr value
IB/hfi1: Insure freeze_work work_struct is canceled on shutdown
IB/rdmavt: Fix alloc_qpn() WARN_ON()
RDMA/core: Fix panic when port_data isn't initialized
RDMA/uverbs: Pass udata on uverbs error unwind
RDMA/core: Clear out the udata before error unwind
RDMA/hns: Fix PD memory leak for internal allocation
RDMA/srp: Rename SRP sysfs name after IB device rename trigger
Linus Torvalds [Fri, 7 Jun 2019 16:21:48 +0000 (09:21 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Another round of mostly-benign fixes, the exception being a boot crash
on SVE2-capable CPUs (although I don't know where you'd find such a
thing, so maybe it's benign too).
We're in the process of resolving some big-endian ptrace breakage, so
I'll probably have some more for you next week.
Summary:
- Fix boot crash on platforms with SVE2 due to missing register
encoding
- Fix architected timer accessors when CONFIG_OPTIMIZE_INLINING=y
- Move cpu_logical_map into smp.h for use by upcoming irqchip drivers
- Trivial typo fix in comment
- Disable some useless, noisy warnings from GCC 9"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Silence gcc warnings about arch ABI drift
ARM64: trivial: s/TIF_SECOMP/TIF_SECCOMP/ comment typo fix
arm64: arch_timer: mark functions as __always_inline
arm64: smp: Moved cpu_logical_map[] to smp.h
arm64: cpufeature: Fix missing ZFR0 in __read_sysreg_by_encoding()
Masahiro Yamada [Thu, 6 Jun 2019 04:13:58 +0000 (13:13 +0900)]
kbuild: use more portable 'command -v' for cc-cross-prefix
To print the pathname that will be used by shell in the current
environment, 'command -v' is a standardized way. [1]
'which' is also often used in scripts, but it is less portable.
When I worked on commit bd55f96fa9fc ("kbuild: refactor cc-cross-prefix
implementation"), I was eager to use 'command -v' but it did not work.
(The reason is explained below.)
I kept 'which' as before but got rid of '> /dev/null 2>&1' as I
thought it was no longer needed. Sorry, I was wrong.
It works well on my Ubuntu machine, but Alexey Brodkin reports noisy
warnings on CentOS7 when 'which' fails to find the given command in
the PATH environment.
$ which foo
which: no foo in (/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin)
Given that behavior of 'which' depends on system (and it may not be
installed by default), I want to try 'command -v' once again.
The specification [1] clearly describes the behavior of 'command -v'
when the given command is not found:
Otherwise, no output shall be written and the exit status shall reflect
that the name was not found.
However, we need a little magic to use 'command -v' from Make.
$(shell ...) passes the argument to a subshell for execution, and
returns the standard output of the command.
Here is a trick. GNU Make may optimize this by executing the command
directly instead of forking a subshell, if no shell special characters
are found in the command and omitting the subshell will not change the
behavior.
In this case, no shell special character is used. So, Make will try
to run it directly. However, 'command' is a shell-builtin command,
then Make would fail to find it in the PATH environment:
$ make ARCH=m68k defconfig
make: command: Command not found
make: command: Command not found
make: command: Command not found
In fact, Make has a table of shell-builtin commands because it must
ask the shell to execute them.
Until recently, 'command' was missing in the table.
This issue was fixed by the following commit:
| commit 1af314465e5dfe3e8baa839a32a72e83c04f26ef
| Author: Paul Smith <[email protected]>
| Date: Sun Nov 12 18:10:28 2017 -0500
|
| * job.c: Add "command" as a known shell built-in.
|
| This is not a POSIX shell built-in but it's common in UNIX shells.
| Reported by Nick Bowler <[email protected]>.
Because the latest release is GNU Make 4.2.1 in 2016, this commit is
not included in any released versions. (But some distributions may
have back-ported it.)
We need to trick Make to spawn a subshell. There are various ways to
do so:
1) Use a shell special character '~' as dummy
$(shell : ~; command -v $(c)gcc)
2) Use a variable reference that always expands to the empty string
(suggested by David Laight)
$(shell command$${x:+} -v $(c)gcc)
3) Use redirect
$(shell command -v $(c)gcc 2>/dev/null)
I chose 3) to not confuse people. The stderr would not be polluted
anyway, but it will provide extra safety, and is easy to understand.
Vasily Gorbik [Thu, 6 Jun 2019 14:58:45 +0000 (16:58 +0200)]
s390/unwind: correct stack switching during unwind
Adjust conditions in on_stack function. That fixes backchain unwinder
which was unable to read pt_regs at the very bottom of the stack and
hence couldn't follow stacks (e.g. from async stack to a task stack).
Nikolay Borisov [Mon, 3 Jun 2019 10:06:00 +0000 (13:06 +0300)]
btrfs: Always trim all unallocated space in btrfs_trim_free_extents
This patch removes support for range parameters of FITRIM ioctl when
trimming unallocated space on devices. This is necessary since ranges
passed from user space are generally interpreted as logical addresses,
whereas btrfs_trim_free_extents used to interpret them as device
physical extents. This could result in counter-intuitive behavior for
users so it's best to remove that support altogether.
Additionally, the existing range support had a bug where if an offset
was passed to FITRIM which overflows u64 e.g. -1 (parsed as u64 18446744073709551615) then wrong data was fed into btrfs_issue_discard,
which in turn leads to wrap-around when aligning the passed range and
results in wrong regions being discarded which leads to data corruption.
Fixes: c2d1b3aae336 ("btrfs: Honour FITRIM range constraints during free space trim") Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Nikolay Borisov <[email protected]> Signed-off-by: David Sterba <[email protected]>
powerpc/32s: fix booting with CONFIG_PPC_EARLY_DEBUG_BOOTX
When booting through OF, setup_disp_bat() does nothing because
disp_BAT are not set. By change, it used to work because BOOTX
buffer is mapped 1:1 at address 0x81000000 by the bootloader, and
btext_setup_display() sets virt addr same as phys addr.
But since commit 215b823707ce ("powerpc/32s: set up an early static
hash table for KASAN."), a temporary page table overrides the
bootloader mapping.
This 0x81000000 is also problematic with the newly implemented
Kernel Userspace Access Protection (KUAP) because it is within user
address space.
This patch fixes those issues by properly setting disp_BAT through
a call to btext_prepare_BAT(), allowing setup_disp_bat() to
properly setup BAT3 for early bootx screen buffer access.
Reported-by: Mathieu Malaterre <[email protected]> Fixes: 215b823707ce ("powerpc/32s: set up an early static hash table for KASAN.") Signed-off-by: Christophe Leroy <[email protected]> Tested-by: Mathieu Malaterre <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
Neil Armstrong [Wed, 5 Jun 2019 14:12:53 +0000 (16:12 +0200)]
drm/meson: fix G12A primary plane disabling
The G12A Primary plane was disabled by writing in the OSD1 configuration
registers, but this caused the plane blender to stall instead of continuing
to blend only the overlay plane.
Fix this by disabling the OSD1 plane in the blender registers, and also
enabling it back using the same register.
Angelo Ruocco [Tue, 21 May 2019 08:01:55 +0000 (10:01 +0200)]
block, bfq: add weight symlink to the bfq.weight cgroup parameter
Many userspace tools and services use the proportional-share policy of
the blkio/io cgroups controller. The CFQ I/O scheduler implemented
this policy for the legacy block layer. To modify the weight of a
group in case CFQ was in charge, the 'weight' parameter of the group
must be modified. On the other hand, the BFQ I/O scheduler implements
the same policy in blk-mq, but, with BFQ, the parameter to modify has
a different name: bfq.weight (forced choice until legacy block was
present, because two different policies cannot share a common parameter
in cgroups).
Due to CFQ legacy, most if not all userspace configurations still use
the parameter 'weight', and for the moment do not seem likely to be
changed. But, when CFQ went away with legacy block, such a parameter
ceased to exist.
So, a simple workaround has been proposed [1] to make all
configurations work: add a symlink, named weight, to bfq.weight. This
commit adds such a symlink.
Dave Airlie [Fri, 7 Jun 2019 07:14:19 +0000 (17:14 +1000)]
Merge branch 'linux-5.2' of git://github.com/skeggsb/linux into drm-fixes
" This is a bit more than I'd like to be pushing at this point in a
cycle, but it's a fairly important issue. There's been numerous
reports of more recent GP10[2467] boards failing to load, and I've
worked with NVIDIA FW engineers and tracked this down to the FW we've
been using not properly supporting the boards in question.
I've pushed an update to linux-firmware with the new FW version, which
unfortunately contains API changes vs the older firmware.
This series teaches the ACR subsystem inside nouveau enough to be able
to deal with supporting multiple incompatible FW revisions, and adds
support to the relevant chipsets for loading the newer FW revision, if
it's available."
Nicholas Piggin [Fri, 7 Jun 2019 03:56:36 +0000 (13:56 +1000)]
powerpc/64s: __find_linux_pte() synchronization vs pmdp_invalidate()
The change to pmdp_invalidate() to mark the pmd with _PAGE_INVALID
broke the synchronisation against lock free lookups,
__find_linux_pte()'s pmd_none() check no longer returns true for such
cases.
Fix this by adding a check for this condition as well.
Nicholas Piggin [Fri, 7 Jun 2019 03:56:35 +0000 (13:56 +1000)]
powerpc/64s: Fix THP PMD collapse serialisation
Commit 1b2443a547f9 ("powerpc/book3s64: Avoid multiple endian
conversion in pte helpers") changed the actual bitwise tests in
pte_access_permitted by using pte_write() and pte_present() helpers
rather than raw bitwise testing _PAGE_WRITE and _PAGE_PRESENT bits.
The pte_present() change now returns true for PTEs which are
!_PAGE_PRESENT and _PAGE_INVALID, which is the combination used by
pmdp_invalidate() to synchronize access from lock-free lookups.
pte_access_permitted() is used by pmd_access_permitted(), so allowing
GUP lock free access to proceed with such PTEs breaks this
synchronisation.
This bug has been observed on a host using the hash page table MMU,
with random crashes and corruption in guests, usually together with
bad PMD messages in the host.
Fix this by adding an explicit check in pmd_access_permitted(), and
documenting the condition explicitly.
The pte_write() change should be okay, and would prevent GUP from
falling back to the slow path when encountering savedwrite PTEs, which
matches what x86 (that does not implement savedwrite) does.
In the old days, _PAGE_EXEC didn't exist on 6xx aka book3s/32.
Therefore, allthough __mapin_ram_chunk() was already mapping kernel
text with PAGE_KERNEL_TEXT and the rest with PAGE_KERNEL, the entire
memory was executable. Part of the memory (first 512kbytes) was
mapped with BATs instead of page table, but it was also entirely
mapped as executable.
In commit 385e89d5b20f ("powerpc/mm: add exec protection on
powerpc 603"), we started adding exec protection to some 6xx, namely
the 603, for pages mapped via pagetables.
Then, in commit 63b2bc619565 ("powerpc/mm/32s: Use BATs for
STRICT_KERNEL_RWX"), the exec protection was extended to BAT mapped
memory, so that really only the kernel text could be executed.
The problem here is that kexec is based on copying some code into
upper part of memory then executing it from there in order to install
a fresh new kernel at its definitive location.
However, the code is position independant and first part of it is
just there to deactivate the MMU and jump to the second part. So it
is possible to run this first part inplace instead of running the
copy. Once the MMU is off, there is no protection anymore and the
second part of the code will just run as before.
Ming Lei [Tue, 4 Jun 2019 13:08:02 +0000 (21:08 +0800)]
block: free sched's request pool in blk_cleanup_queue
In theory, IO scheduler belongs to request queue, and the request pool
of sched tags belongs to the request queue too.
However, the current tags allocation interfaces are re-used for both
driver tags and sched tags, and driver tags is definitely host wide,
and doesn't belong to any request queue, same with its request pool.
So we need tagset instance for freeing request of sched tags.
Meantime, blk_mq_free_tag_set() often follows blk_cleanup_queue() in case
of non-BLK_MQ_F_TAG_SHARED, this way requires that request pool of sched
tags to be freed before calling blk_mq_free_tag_set().
Commit 47cdee29ef9d94e ("block: move blk_exit_queue into __blk_release_queue")
moves blk_exit_queue into __blk_release_queue for simplying the fast
path in generic_make_request(), then causes oops during freeing requests
of sched tags in __blk_release_queue().
Fix the above issue by move freeing request pool of sched tags into
blk_cleanup_queue(), this way is safe becasue queue has been frozen and no any
in-queue requests at that time. Freeing sched tags has to be kept in queue's
release handler becasue there might be un-completed dispatch activity
which might refer to sched tags.
Linus Torvalds [Thu, 6 Jun 2019 20:13:09 +0000 (13:13 -0700)]
Merge branch 'parisc-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
- Fix crashes when accessing PCI devices on some machines like C240 and
J5000. The crashes were triggered because we replaced cache flushes
by nops in the alternative coding where we shouldn't for some
machines.
- Dave fixed a race in the usage of the sr1 space register when used to
load the coherence index.
- Use the hardware lpa instruction to to load the physical address of
kernel virtual addresses in the iommu driver code.
- The kernel may fail to link when CONFIG_MLONGCALLS isn't set. Solve
that by rearranging functions in the final vmlinux executeable.
- Some defconfig cleanups and removal of compiler warnings.
* 'parisc-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix crash due alternative coding for NP iopdir_fdc bit
parisc: Use lpa instruction to load physical addresses in driver code
parisc: configs: Remove useless UEVENT_HELPER_PATH
parisc: Use implicit space register selection for loading the coherence index of I/O pdirs
parisc: Fix compiler warnings in float emulation code
parisc/slab: cleanup after /proc/slab_allocators removal
parisc: Allow building 64-bit kernel without -mlong-calls compiler option
parisc: Kconfig: remove ARCH_DISCARD_MEMBLOCK
Linus Torvalds [Thu, 6 Jun 2019 20:10:49 +0000 (13:10 -0700)]
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a regression that breaks the jitterentropy RNG and a
potential memory leak in hmac"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: hmac - fix memory leak in hmac_init_tfm()
crypto: jitterentropy - change back to module_init()
Linus Torvalds [Thu, 6 Jun 2019 19:31:15 +0000 (12:31 -0700)]
Merge tag 'ovl-fixes-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
"Here's one fix for a class of bugs triggered by syzcaller, and one
that makes xfstests fail less"
* tag 'ovl-fixes-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: doc: add non-standard corner cases
ovl: detect overlapping layers
ovl: support the FS_IOC_FS[SG]ETXATTR ioctls
Linus Torvalds [Thu, 6 Jun 2019 19:25:56 +0000 (12:25 -0700)]
Merge tag 'fuse-fixes-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
"This fixes a leaked inode lock in an error cleanup path and a data
consistency issue with copy_file_range().
It also adds a new flag for the WRITE request that allows userspace
filesystems to clear suid/sgid bits on the file if necessary"
* tag 'fuse-fixes-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: extract helper for range writeback
fuse: fix copy_file_range() in the writeback case
fuse: add FUSE_WRITE_KILL_PRIV
fuse: fallocate: fix return with locked inode
Linus Torvalds [Thu, 6 Jun 2019 19:19:37 +0000 (12:19 -0700)]
Merge tag 'nfs-for-5.2-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
"These are mostly stable bugfixes found during testing, many during the
recent NFS bake-a-thon.
Stable bugfixes:
- SUNRPC: Fix regression in umount of a secure mount
- SUNRPC: Fix a use after free when a server rejects the RPCSEC_GSS credential
- NFSv4.1: Again fix a race where CB_NOTIFY_LOCK fails to wake a waiter
- NFSv4.1: Fix bug only first CB_NOTIFY_LOCK is handled
Other bugfixes:
- xprtrdma: Use struct_size() in kzalloc()"
* tag 'nfs-for-5.2-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFSv4.1: Fix bug only first CB_NOTIFY_LOCK is handled
NFSv4.1: Again fix a race where CB_NOTIFY_LOCK fails to wake a waiter
SUNRPC: Fix a use after free when a server rejects the RPCSEC_GSS credential
SUNRPC fix regression in umount of a secure mount
xprtrdma: Use struct_size() in kzalloc()
Parav Pandit [Thu, 6 Jun 2019 16:52:33 +0000 (10:52 -0600)]
vfio/mdev: Synchronize device create/remove with parent removal
In following sequences, child devices created while removing mdev parent
device can be left out, or it may lead to race of removing half
initialized child mdev devices.
Therefore, mdev core is improved as below to overcome above issues.
Wait for any ongoing mdev create() and remove() to finish before
unregistering parent device.
This continues to allow multiple create and remove to progress in
parallel for different mdev devices as most common case.
At the same time guard parent removal while parent is being accessed by
create() and remove() callbacks.
create()/remove() and unregister_device() are synchronized by the rwsem.
Refactor device removal code to mdev_device_remove_common() to avoid
acquiring unreg_sem of the parent.
Parav Pandit [Thu, 6 Jun 2019 16:52:33 +0000 (10:52 -0600)]
vfio/mdev: Avoid creating sysfs remove file on stale device removal
If device is removal is initiated by two threads as below, mdev core
attempts to create a syfs remove file on stale device.
During this flow, below [1] call trace is observed.
cpu-0 cpu-1
----- -----
mdev_unregister_device()
device_for_each_child
mdev_device_remove_cb
mdev_device_remove
user_syscall
remove_store()
mdev_device_remove()
[..]
unregister device();
/* not found in list or
* active=false.
*/
sysfs_create_file()
..Call trace
Now that mdev core follows correct device removal sequence of the linux
bus model, remove shouldn't fail in normal cases. If it fails, there is
no point of creating a stale file or checking for specific error status.
Paolo Abeni [Thu, 6 Jun 2019 13:45:03 +0000 (15:45 +0200)]
pktgen: do not sleep with the thread lock held.
Currently, the process issuing a "start" command on the pktgen procfs
interface, acquires the pktgen thread lock and never release it, until
all pktgen threads are completed. The above can blocks indefinitely any
other pktgen command and any (even unrelated) netdevice removal - as
the pktgen netdev notifier acquires the same lock.
The issue is demonstrated by the following script, reported by Matteo:
ip -b - <<'EOF'
link add type dummy
link add type veth
link set dummy0 up
EOF
modprobe pktgen
echo reset >/proc/net/pktgen/pgctrl
{
echo rem_device_all
echo add_device dummy0
} >/proc/net/pktgen/kpktgend_0
echo count 0 >/proc/net/pktgen/dummy0
echo start >/proc/net/pktgen/pgctrl &
sleep 1
rmmod veth
Fix the above releasing the thread lock around the sleep call.
Additionally we must prevent racing with forcefull rmmod - as the
thread lock no more protects from them. Instead, acquire a self-reference
before waiting for any thread. As a side effect, running
rmmod pktgen
while some thread is running now fails with "module in use" error,
before this patch such command hanged indefinitely.
Note: the issue predates the commit reported in the fixes tag, but
this fix can't be applied before the mentioned commit.
v1 -> v2:
- no need to check for thread existence after flipping the lock,
pktgen threads are freed only at net exit time
-
Fixes: 6146e6a43b35 ("[PKTGEN]: Removes thread_{un,}lock() macros.") Reported-and-tested-by: Matteo Croce <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: David S. Miller <[email protected]>
projects / linux.git / log