Jon Mason [Wed, 5 Oct 2016 19:36:49 +0000 (15:36 -0400)]
net: bgmac: Fix errant feature flag check
During the conversion to the feature flags, a check against
ci->id != BCMA_CHIP_ID_BCM47162
became
bgmac->feature_flags & BGMAC_FEAT_CLKCTLS
instead of
!(bgmac->feature_flags & BGMAC_FEAT_CLKCTLS)
Eric Dumazet [Wed, 5 Oct 2016 19:13:18 +0000 (04:13 +0900)]
netlink: do not enter direct reclaim from netlink_dump()
Since linux-3.15, netlink_dump() can use up to 16384 bytes skb
allocations.
Due to struct skb_shared_info ~320 bytes overhead, we end up using
order-3 (on x86) page allocations, that might trigger direct reclaim and
add stress.
The intent was really to attempt a large allocation but immediately
fallback to a smaller one (order-1 on x86) in case of memory stress.
On recent kernels (linux-4.4), we can remove __GFP_DIRECT_RECLAIM to
meet the goal. Old kernels would need to remove __GFP_WAIT
While we are at it, since we do an order-3 allocation, allow to use
all the allocated bytes instead of 16384 to reduce syscalls during
large dumps.
Anoob Soman [Wed, 5 Oct 2016 14:12:54 +0000 (15:12 +0100)]
packet: call fanout_release, while UNREGISTERING a netdev
If a socket has FANOUT sockopt set, a new proto_hook is registered
as part of fanout_add(). When processing a NETDEV_UNREGISTER event in
af_packet, __fanout_unlink is called for all sockets, but prot_hook which was
registered as part of fanout_add is not removed. Call fanout_release, on a
NETDEV_UNREGISTER, which removes prot_hook and removes fanout from the
fanout_list.
This fixes BUG_ON(!list_empty(&dev->ptype_specific)) in netdev_run_todo()
The KSZ9031 skew registers contain an offset, the chip's default value
is "neutral" which does not add any skew. Programming a 0 into a skew
property will actually set it the maximal negative adjustment and not
to a neutral position as one would expect.
Explain this situation in the devicetree binding documentation and list
the settings that the chip considers neutral.
Changing the implementation to accept negative values would have been
a better solution, but would break existing configurations.
David Vrabel [Tue, 4 Oct 2016 09:29:17 +0000 (10:29 +0100)]
xen-netback: batch copies for multiple to-guest rx packets
Instead of flushing the copy ops when an packet is complete, complete
packets when their copy ops are done. This improves performance by
reducing the number of grant copy hypercalls.
Latency is still limited by the relatively small size of the copy
batch.
David Vrabel [Tue, 4 Oct 2016 09:29:14 +0000 (10:29 +0100)]
xen-netback: refactor guest rx
Refactor the to-guest (rx) path to:
1. Push responses for completed skbs earlier, reducing latency.
2. Reduce the per-queue memory overhead by greatly reducing the
maximum number of grant copy ops in each hypercall (from 4352 to
64). Each struct xenvif_queue is now only 44 kB instead of 220 kB.
Paul Durrant [Tue, 4 Oct 2016 09:29:13 +0000 (10:29 +0100)]
xen-netback: retire guest rx side prefix GSO feature
As far as I am aware only very old Windows network frontends make use of
this style of passing GSO packets from backend to frontend. These
frontends can easily be replaced by the freely available Xen Project
Windows PV network frontend, which uses the 'default' mechanism for
passing GSO packets, which is also used by all Linux frontends.
NOTE: Removal of this feature will not cause breakage in old Windows
frontends. They simply will no longer receive GSO packets - the
packets instead being fragmented in the backend.
Paul Durrant [Tue, 4 Oct 2016 09:29:12 +0000 (10:29 +0100)]
xen-netback: separate guest side rx code into separate module
The netback source module has become very large and somewhat confusing.
This patch simply moves all code related to the backend to frontend (i.e
guest side rx) data-path into a separate rx source module.
This patch contains no functional change, it is code movement and
minimal changes to avoid patch style-check issues.
Linus Torvalds [Fri, 7 Oct 2016 00:13:54 +0000 (17:13 -0700)]
Merge tag 'dmaengine-4.9-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
"This is bit large pile of code which bring in some nice additions:
- Error reporting: we have added a new mechanism for users of
dmaenegine to register a callback_result which tells them the
result of the dma transaction. Right now only one user (ntb) is
using it.
- As we discussed on KS mailing list and pointed out NO_IRQ has no
place in kernel, this also remove NO_IRQ from dmaengine subsystem
(both arm and ppc users)
- Support for IOMMU slave transfers and its implementation for arm.
- To get better build coverage, enable COMPILE_TEST for bunch of
driver, and fix the warning and sparse complaints on these.
- Apart from above, usual updates spread across drivers"
* tag 'dmaengine-4.9-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (169 commits)
async_pq_val: fix DMA memory leak
dmaengine: virt-dma: move function declarations
dmaengine: omap-dma: Enable burst and data pack for SG
DT: dmaengine: rcar-dmac: document R8A7743/5 support
dmaengine: fsldma: Unmap region obtained by of_iomap
dmaengine: jz4780: fix resource leaks on error exit return
dma-debug: fix ia64 build, use PHYS_PFN
dmaengine: coh901318: fix integer overflow when shifting more than 32 places
dmaengine: edma: avoid uninitialized variable use
dma-mapping: fix m32r build warning
dma-mapping: fix ia64 build, use PHYS_PFN
dmaengine: ti-dma-crossbar: enable COMPILE_TEST
dmaengine: omap-dma: enable COMPILE_TEST
dmaengine: edma: enable COMPILE_TEST
dmaengine: ti-dma-crossbar: Fix of_device_id data parameter usage
dmaengine: ti-dma-crossbar: Correct type for of_find_property() third parameter
dmaengine/ARM: omap-dma: Fix the DMAengine compile test on non OMAP configs
dmaengine: edma: Rename set_bits and remove unused clear_bits helper
dmaengine: edma: Use correct type for of_find_property() third parameter
dmaengine: edma: Fix of_device_id data parameter usage (legacy vs TPCC)
...
Linus Torvalds [Fri, 7 Oct 2016 00:03:49 +0000 (17:03 -0700)]
Merge tag 'rpmsg-v4.9' of git://github.com/andersson/remoteproc
Pull rpmsg updates from Bjorn Andersson:
"The bulk of these patches involve splitting the rpmsg implementation
into a framework/API part and a virtio specific backend part. It then
adds the Qualcomm Shared Memory Device (SMD) as an additional
supported wire format.
Also included is a set of code style cleanups that have been lingering
for a while"
* tag 'rpmsg-v4.9' of git://github.com/andersson/remoteproc: (26 commits)
rpmsg: smd: fix dependency on QCOM_SMD=n
rpmsg: Introduce Qualcomm SMD backend
rpmsg: Allow callback to return errors
rpmsg: Move virtio specifics from public header
rpmsg: virtio: Hide vrp pointer from the public API
rpmsg: Hide rpmsg indirection tables
rpmsg: Split rpmsg core and virtio backend
rpmsg: Split off generic tail of create_channel()
rpmsg: Move helper for finding rpmsg devices to core
rpmsg: Move endpoint related interface to rpmsg core
rpmsg: Indirection table for rpmsg_endpoint operations
rpmsg: Move rpmsg_device API to new file
rpmsg: Introduce indirection table for rpmsg_device operations
rpmsg: Clean up rpmsg device vs channel naming
rpmsg: Make rpmsg_create_ept() take channel_info struct
rpmsg: rpmsg_send() operations takes rpmsg_endpoint
rpmsg: Name rpmsg devices based on channel id
rpmsg: Enable matching devices with drivers based on DT
rpmsg: Drop prototypes for non-existing functions
samples/rpmsg: add support for multiple instances
...
Linus Torvalds [Fri, 7 Oct 2016 00:00:09 +0000 (17:00 -0700)]
Merge tag 'rproc-v4.9' of git://github.com/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
"In addition to a slew of minor fixes and cleanups these patches
refactor how we deal with remoteprocs that will be auto-booting
themselves.
That does clean up the remote resource handling but makes for
additional work to clarify responsibilities and life cycles of
resources. We also revise how module locking of remoteproc drivers
work, so that they are locked as we hand out references to them to
third parties, rather than only when booted by anyone.
In addition to that we also introduce the Qualcomm Wireless Subsystem
remoteproc driver"
* tag 'rproc-v4.9' of git://github.com/andersson/remoteproc: (26 commits)
remoteproc: Refactor rproc module locking
remoteproc: Split driver and consumer dereferencing
remoteproc: Correct resource handling upon boot failure
remoteproc: Drop unnecessary NULL check
remoteproc: core: transform struct fw_rsc_vdev_vring reserved field in pa
remoteproc: Modify FW_RSC_ADDR_ANY definition
remoteproc: qcom: wcnss: Fix return value check in wcnss_probe()
remoteproc: qcom: Introduce WCNSS peripheral image loader
dt-binding: remoteproc: Introduce Qualcomm WCNSS loader binding
remoteproc: Only update table_ptr if we have a loaded table
remoteproc: Move handling of cached table to boot/shutdown
remoteproc: Move vdev handling to boot/shutdown
remoteproc: Calculate max_notifyid during load
remoteproc: Introduce auto-boot flag
remoteproc/omap: revise a minor error trace message
remoteproc/omap: fix various code formatting issues
remoteproc: print hex numbers with a leading 0x format
remoteproc: align code with open parenthesis
remoteproc: fix bare unsigned type usage
remoteproc: use variable names for sizeof() operator
...
- Sync memcpy, cpufeatures and bpf headers with the kernel (Arnaldo Carvalho de Melo)
- Add some more tool tips (Donghyun Kim, Kim SeonYoung, Nambong Ha)
- Fix libtraceevent's kbuffer_read_at_offset() handling of offsets before or
equal the first event (Namhyung Kim)
- Fix uretprobe probe placement on ppc64le (Ravi Bangoria)
- Support building C++ source files and add feature detection for g++,
prep work for supporting a builtin clang/llvm, to remove the need for having
that toolchain installed to automagically build BPF scriptlets that then
gets uploaded to the kernel via sys_bpf() (Wang Nan)
Linus Torvalds [Thu, 6 Oct 2016 22:30:40 +0000 (15:30 -0700)]
Merge tag 'for-f2fs-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've investigated how f2fs deals with errors given by
our fault injection facility. With this, we could fix several corner
cases. And, in order to improve the performance, we set inline_dentry
by default and enhance the exisiting discard issue flow. In addition,
we added f2fs_migrate_page for better memory management.
Enhancements:
- set inline_dentry by default
- improve discard issue flow
- add more fault injection cases in f2fs
- allow block preallocation for encrypted files
- introduce migrate_page callback function
- avoid truncating the next direct node block at every checkpoint
Bug fixes:
- set page flag correctly between write_begin and write_end
- missing error handling cases detected by fault injection
- preallocate blocks regarding to 4KB alignement correctly
- dentry and filename handling of encryption
- lost xattrs of directories"
* tag 'for-f2fs-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (69 commits)
f2fs: introduce update_ckpt_flags to clean up
f2fs: don't submit irrelevant page
f2fs: fix to commit bio cache after flushing node pages
f2fs: introduce get_checkpoint_version for cleanup
f2fs: remove dead variable
f2fs: remove redundant io plug
f2fs: support checkpoint error injection
f2fs: fix to recover old fault injection config in ->remount_fs
f2fs: do fault injection initialization in default_options
f2fs: remove redundant value definition
f2fs: support configuring fault injection per superblock
f2fs: adjust display format of segment bit
f2fs: remove dirty inode pages in error path
f2fs: do not unnecessarily null-terminate encrypted symlink data
f2fs: handle errors during recover_orphan_inodes
f2fs: avoid gc in cp_error case
f2fs: should put_page for summary page
f2fs: assign return value in f2fs_gc
f2fs: add customized migrate_page callback
f2fs: introduce cp_lock to protect updating of ckpt_flags
...
* tag 'pstore-v4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
ramoops: move spin_lock_init after kmalloc error checking
pstore/ram: Use memcpy_fromio() to save old buffer
pstore/ram: Use memcpy_toio instead of memcpy
pstore/pmsg: drop bounce buffer
pstore/ram: Set pstore flags dynamically
pstore: Split pstore fragile flags
pstore/core: drop cmpxchg based updates
pstore/ramoops: fixup driver removal
Linus Torvalds [Thu, 6 Oct 2016 20:33:35 +0000 (13:33 -0700)]
Merge tag 'for-linus-4.9-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux
Pull orangefs updates from Mike Marshall:
"Miscellaneous improvements:
- clean up debugfs globals
- remove dead code in sysfs
- reorganize duplicated sysfs attribute structs
- consolidate sysfs show and store functions
- remove duplicated sysfs_ops structures
- describe organization of sysfs
- make devreq_mutex static
- g_orangefs_stats -> orangefs_stats for consistency
- rename most remaining global variables
Feature negotiation:
- enable Orangefs userspace and kernel module to negotiate mutually
supported features"
* tag 'for-linus-4.9-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
Revert "orangefs: bump minimum userspace version"
orangefs: bump minimum userspace version
orangefs: rename most remaining global variables
orangefs: g_orangefs_stats -> orangefs_stats for consistency
orangefs: make devreq_mutex static
orangefs: describe organization of sysfs
orangefs: remove duplicated sysfs_ops structures
orangefs: consolidate sysfs show and store functions
orangefs: reorganize duplicated sysfs attribute structs
orangefs: remove dead code in sysfs
orangefs: clean up debugfs globals
orangefs: do not allow client readahead cache without feature bit
orangefs: add features op
orangefs: record userspace version for feature compatbility
orangefs: add readahead count and size to sysfs
orangefs: re-add flush_racache from out-of-tree
orangefs: turn param response value into union
orangefs: add missing param request ops
orangefs: rename remaining bits of mmap readahead cache
Eric Anholt [Thu, 29 Sep 2016 22:34:44 +0000 (15:34 -0700)]
drm/vc4: Add support for double-clocked modes.
Now that we have infoframes to report the pixel repeat flag, we can
start using it. Fixes locking the 720x480i and 720x576i modes on my
Dell 2408WFP. Like the 1920x1080i case, they don't fit properly on
the screen, though.
Eric Anholt [Thu, 29 Sep 2016 00:30:25 +0000 (17:30 -0700)]
drm/vc4: Fix support for interlaced modes on HDMI.
We really do need to be using the halved V fields. I had been
confused by the code I was using as a reference because it stored
halved vsync fields but not halved vdisplay, so it looked like I only
needed to divide vdisplay by 2.
This reverts part of Mario's timestamping fixes that prevented
CRTC_HALVE_V from applying, and instead adjusts the timestamping code
to not use the crtc field in that case.
Fixes locking of 1920x1080x60i on my Dell 2408WFP. There are black
bars on the top and bottom, but I suspect that might be an
under/overscan flags problem as opposed to video timings.
Eric Anholt [Thu, 29 Sep 2016 00:21:05 +0000 (17:21 -0700)]
drm/vc4: Increase timeout for HDMI_SCHEDULER_CONTROL changes.
Fixes occasional debug spew at boot when connected directly through
HDMI, and probably confusing the HDMI state machine when we go trying
to poke registers for the enable sequence too soon.
Eric Anholt [Wed, 14 Sep 2016 18:21:29 +0000 (19:21 +0100)]
drm/vc4: Fall back to using an EDID probe in the absence of a GPIO.
On Pi0/1/2, we use an external GPIO line for hotplug detection, since
the HDMI_HOTPLUG register isn't connected to anything. However, with
the Pi3 the HPD GPIO line has moved off to a GPIO expander that will
be tricky to get to (the firmware is constantly polling the expander
using i2c0, so we'll need to coordinate with it).
As a stop-gap, if we don't have a GPIO line, use an EDID probe to
detect connection. Fixes HDMI display on the pi3.
Eric Anholt [Tue, 27 Sep 2016 16:03:13 +0000 (09:03 -0700)]
drm/vc4: Fix races when the CS reads from render targets.
With the introduction of bin/render pipelining, the previous job may
not be completed when we start binning the next one. If the previous
job wrote our VBO, IB, or CS textures, then the binning stage might
get stale or uninitialized results.
Fixes the major rendering failure in glmark2 -b terrain.
Signed-off-by: Eric Anholt <[email protected]> Fixes: ca26d28bbaa3 ("drm/vc4: improve throughput by pipelining binning and rendering jobs") Cc: [email protected]
Linus Torvalds [Thu, 6 Oct 2016 18:48:41 +0000 (11:48 -0700)]
Merge tag 'trace-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"This release cycle is rather small. Just a few fixes to tracing.
The big change is the addition of the hwlat tracer. It not only
detects SMIs, but also other latency that's caused by the hardware. I
have detected some latency from large boxes having bus contention"
* tag 'trace-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Call traceoff trigger after event is recorded
ftrace/scripts: Add helper script to bisect function tracing problem functions
tracing: Have max_latency be defined for HWLAT_TRACER as well
tracing: Add NMI tracing in hwlat detector
tracing: Have hwlat trace migrate across tracing_cpumask CPUs
tracing: Add documentation for hwlat_detector tracer
tracing: Added hardware latency tracer
ftrace: Access ret_stack->subtime only in the function profiler
function_graph: Handle TRACE_BPUTS in print_graph_comment
tracing/uprobe: Drop isdigit() check in create_trace_uprobe
Bjorn Helgaas [Thu, 6 Oct 2016 18:25:46 +0000 (13:25 -0500)]
PCI: designware: Rename dw_pcie_valid_config() to dw_pcie_valid_device()
Rename dw_pcie_valid_config() to dw_pcie_valid_device() and use the result
directly as a boolean value instead of testing against 0. No functional
change intended.
Linus Torvalds [Thu, 6 Oct 2016 18:19:10 +0000 (11:19 -0700)]
Merge tag 'for-linus-4.9-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from David Vrabel:
"xen features and fixes for 4.9:
- switch to new CPU hotplug mechanism
- support driver_override in pciback
- require vector callback for HVM guests (the alternate mechanism via
the platform device has been broken for ages)"
* tag 'for-linus-4.9-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/x86: Update topology map for PV VCPUs
xen/x86: Initialize per_cpu(xen_vcpu, 0) a little earlier
xen/pciback: support driver_override
xen/pciback: avoid multiple entries in slot list
xen/pciback: simplify pcistub device handling
xen: Remove event channel notification through Xen PCI platform device
xen/events: Convert to hotplug state machine
xen/x86: Convert to hotplug state machine
x86/xen: add missing \n at end of printk warning message
xen/grant-table: Use kmalloc_array() in arch_gnttab_valloc()
xen: Make VPMU init message look less scary
xen: rename xen_pmu_init() in sys-hypervisor.c
hotplug: Prevent alloc/free of irq descriptors during cpu up/down (again)
xen/x86: Move irq allocation from Xen smp_op.cpu_up()
1. Debugging qp state transitions and qp errors in loopback and
multiple QP tests is difficult without qp numbers in debug logs.
This patch adds qp number to important debug logs.
2. Instead of having rxe: prefix in few logs and not having in
few logs, using uniform module name prefix using pr_fmt macro.
3. Code cleanup for various warnings reported by checkpatch for
incomplete unsigned data type, line over 80 characters, return
statements.
Stephen Bates [Fri, 23 Sep 2016 15:32:11 +0000 (09:32 -0600)]
rdma_rxe: Ensure rdma_rxe init occurs at correct time
There is a problem when CONFIG_RDMA_RXE=y and CONFIG_IPV6=y. This
results in the rdma_rxe initialization occurring before the IPv6
services are ready. This patch delays the initialization of rdma_rxe
until after the IPv6 services are ready. This fix is based on one
proposed by Logan Gunthorpe on a much older code base.
IB/rxe: Properly honor max IRD value for rd/atomic.
This patch honoris the max incoming read request count instead of
outgoing read req count
(a) during modify qp by allocating response queue metadata
(b) during incoming read request processing
This patch fixes below kernel crash on memory registration for rxe
and other transport drivers which has dma_ops extension.
IB/core invokes ib_map_sg_attrs() in generic manner with dma attributes
which is used by mlx5 and mthca adapters. However in doing so it
ignored honoring dma_ops extension of software based transports for
sg map/unmap operation. This results in calling dma_map_sg_attrs of
hardware virtual device resulting in crash for null reference.
We extend the core to support sg_map/unmap_attrs and transport drivers
to implement those dma_ops callback functions.
IB/rxe: Fix sending out loopback packet on netdev interface.
Both prepare4 and prepare6 sets loopback mask in pkt_info structure
instance of skb. The xmit_packet and other requester side functions
use a pkt_info struct from the stack without the proper mask. This
results in sending out the packet to the actual netdev device and
loopback functionality is broken.
Modify prepare() to pass its correctly marked pkt_info struct to
prepare4() and prepare6() instead of them using SKB_TO_PKT(skb) and
getting an incorrectly set mask.
Linus Torvalds [Thu, 6 Oct 2016 17:49:01 +0000 (10:49 -0700)]
Merge tag 'kvm-4.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Radim Krčmář:
"All architectures:
- move `make kvmconfig` stubs from x86
- use 64 bits for debugfs stats
ARM:
- Important fixes for not using an in-kernel irqchip
- handle SError exceptions and present them to guests if appropriate
- proxying of GICV access at EL2 if guest mappings are unsafe
- GICv3 on AArch32 on ARMv8
- preparations for GICv3 save/restore, including ABI docs
- cleanups and a bit of optimizations
MIPS:
- A couple of fixes in preparation for supporting MIPS EVA host
kernels
- MIPS SMP host & TLB invalidation fixes
PPC:
- Fix the bug which caused guests to falsely report lockups
- other minor fixes
- a small optimization
s390:
- Lazy enablement of runtime instrumentation
- up to 255 CPUs for nested guests
- rework of machine check deliver
- cleanups and fixes
x86:
- IOMMU part of AMD's AVIC for vmexit-less interrupt delivery
- Hyper-V TSC page
- per-vcpu tsc_offset in debugfs
- accelerated INS/OUTS in nVMX
- cleanups and fixes"
* tag 'kvm-4.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (140 commits)
KVM: MIPS: Drop dubious EntryHi optimisation
KVM: MIPS: Invalidate TLB by regenerating ASIDs
KVM: MIPS: Split kernel/user ASID regeneration
KVM: MIPS: Drop other CPU ASIDs on guest MMU changes
KVM: arm/arm64: vgic: Don't flush/sync without a working vgic
KVM: arm64: Require in-kernel irqchip for PMU support
KVM: PPC: Book3s PR: Allow access to unprivileged MMCR2 register
KVM: PPC: Book3S PR: Support 64kB page size on POWER8E and POWER8NVL
KVM: PPC: Book3S: Remove duplicate setting of the B field in tlbie
KVM: PPC: BookE: Fix a sanity check
KVM: PPC: Book3S HV: Take out virtual core piggybacking code
KVM: PPC: Book3S: Treat VTB as a per-subcore register, not per-thread
ARM: gic-v3: Work around definition of gic_write_bpr1
KVM: nVMX: Fix the NMI IDT-vectoring handling
KVM: VMX: Enable MSR-BASED TPR shadow even if APICv is inactive
KVM: nVMX: Fix reload apic access page warning
kvmconfig: add virtio-gpu to config fragment
config: move x86 kvm_guest.config to a common location
arm64: KVM: Remove duplicating init code for setting VMID
ARM: KVM: Support vgic-v3
...
Linus Torvalds [Thu, 6 Oct 2016 16:52:23 +0000 (09:52 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull namespace updates from Eric Biederman:
"This set of changes is a number of smaller things that have been
overlooked in other development cycles focused on more fundamental
change. The devpts changes are small things that were a distraction
until we managed to kill off DEVPTS_MULTPLE_INSTANCES. There is an
trivial regression fix to autofs for the unprivileged mount changes
that went in last cycle. A pair of ioctls has been added by Andrey
Vagin making it is possible to discover the relationships between
namespaces when referring to them through file descriptors.
The big user visible change is starting to add simple resource limits
to catch programs that misbehave. With namespaces in general and user
namespaces in particular allowing users to use more kinds of
resources, it has become important to have something to limit errant
programs. Because the purpose of these limits is to catch errant
programs the code needs to be inexpensive to use as it always on, and
the default limits need to be high enough that well behaved programs
on well behaved systems don't encounter them.
To this end, after some review I have implemented per user per user
namespace limits, and use them to limit the number of namespaces. The
limits being per user mean that one user can not exhause the limits of
another user. The limits being per user namespace allow contexts where
the limit is 0 and security conscious folks can remove from their
threat anlysis the code used to manage namespaces (as they have
historically done as it root only). At the same time the limits being
per user namespace allow other parts of the system to use namespaces.
Namespaces are increasingly being used in application sand boxing
scenarios so an all or nothing disable for the entire system for the
security conscious folks makes increasing use of these sandboxes
impossible.
There is also added a limit on the maximum number of mounts present in
a single mount namespace. It is nontrivial to guess what a reasonable
system wide limit on the number of mount structure in the kernel would
be, especially as it various based on how a system is using
containers. A limit on the number of mounts in a mount namespace
however is much easier to understand and set. In most cases in
practice only about 1000 mounts are used. Given that some autofs
scenarious have the potential to be 30,000 to 50,000 mounts I have set
the default limit for the number of mounts at 100,000 which is well
above every known set of users but low enough that the mount hash
tables don't degrade unreaonsably.
These limits are a start. I expect this estabilishes a pattern that
other limits for resources that namespaces use will follow. There has
been interest in making inotify event limits per user per user
namespace as well as interest expressed in making details about what
is going on in the kernel more visible"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (28 commits)
autofs: Fix automounts by using current_real_cred()->uid
mnt: Add a per mount namespace limit on the number of mounts
netns: move {inc,dec}_net_namespaces into #ifdef
nsfs: Simplify __ns_get_path
tools/testing: add a test to check nsfs ioctl-s
nsfs: add ioctl to get a parent namespace
nsfs: add ioctl to get an owning user namespace for ns file descriptor
kernel: add a helper to get an owning user namespace for a namespace
devpts: Change the owner of /dev/pts/ptmx to the mounter of /dev/pts
devpts: Remove sync_filesystems
devpts: Make devpts_kill_sb safe if fsi is NULL
devpts: Simplify devpts_mount by using mount_nodev
devpts: Move the creation of /dev/pts/ptmx into fill_super
devpts: Move parse_mount_options into fill_super
userns: When the per user per user namespace limit is reached return ENOSPC
userns; Document per user per user namespace limits.
mntns: Add a limit on the number of mount namespaces.
netns: Add a limit on the number of net namespaces
cgroupns: Add a limit on the number of cgroup namespaces
ipcns: Add a limit on the number of ipc namespaces
...
drm/amdgpu: warn if dp aux is still attached on free
If this happens (and it recently did), we free a structure while part of
it is still in use, which results in non-obvious crashes. The way it's
detached is not trivial (DRM core has to call the connector .destroy
callback and things must be torn down in the right order), so better
detect it and warn early.
Successful sw_init() and hw_init() states are tracked, but not
late_init(). Various error paths may result in amdgpu_fini() being
called before .late init is done, so late_init needs to be tracked
to avoid unexpected or multiple .late_fini() calls.
Linus Torvalds [Thu, 6 Oct 2016 15:18:10 +0000 (08:18 -0700)]
Merge tag 'xfs-for-linus-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull xfs and iomap updates from Dave Chinner:
"The main things in this update are the iomap-based DAX infrastructure,
an XFS delalloc rework, and a chunk of fixes to how log recovery
schedules writeback to prevent spurious corruption detections when
recovery of certain items was not required.
The other main chunk of code is some preparation for the upcoming
reflink functionality. Most of it is generic and cleanups that stand
alone, but they were ready and reviewed so are in this pull request.
Speaking of reflink, I'm currently planning to send you another pull
request next week containing all the new reflink functionality. I'm
working through a similar process to the last cycle, where I sent the
reverse mapping code in a separate request because of how large it
was. The reflink code merge is even bigger than reverse mapping, so
I'll be doing the same thing again....
- iomap-based DAX infrastructure w/ XFS and ext2 support
- small iomap fixes and additions
- more efficient XFS delayed allocation infrastructure based on iomap
- a rework of log recovery writeback scheduling to ensure we don't
fail recovery when trying to replay items that are already on disk
- some preparation patches for upcoming reflink support
- configurable error handling fixes and documentation
- aio access time update race fixes for XFS and
generic_file_read_iter"
* tag 'xfs-for-linus-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (40 commits)
fs: update atime before I/O in generic_file_read_iter
xfs: update atime before I/O in xfs_file_dio_aio_read
ext2: fix possible integer truncation in ext2_iomap_begin
xfs: log recovery tracepoints to track current lsn and buffer submission
xfs: update metadata LSN in buffers during log recovery
xfs: don't warn on buffers not being recovered due to LSN
xfs: pass current lsn to log recovery buffer validation
xfs: rework log recovery to submit buffers on LSN boundaries
xfs: quiesce the filesystem after recovery on readonly mount
xfs: remote attribute blocks aren't really userdata
ext2: use iomap to implement DAX
ext2: stop passing buffer_head to ext2_get_blocks
xfs: use iomap to implement DAX
xfs: refactor xfs_setfilesize
xfs: take the ilock shared if possible in xfs_file_iomap_begin
xfs: fix locking for DAX writes
dax: provide an iomap based fault handler
dax: provide an iomap based dax read/write path
dax: don't pass buffer_head to copy_user_dax
dax: don't pass buffer_head to dax_insert_mapping
...
Pull sparc updates from David Miller:
"Besides some cleanups the major thing here is supporting relaxed
ordering PCIe transactions on newer sparc64 machines, from Chris
Hyser"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc: fixing ident and beautifying code
sparc64: Enable setting "relaxed ordering" in IOMMU mappings
sparc64: Enable PCI IOMMU version 2 API
sparc: migrate exception table users off module.h and onto extable.h
Linus Torvalds [Thu, 6 Oct 2016 14:59:37 +0000 (07:59 -0700)]
Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
- Correct ARMs dma-mapping to use the correct printk format strings.
- Avoid defining OBJCOPYFLAGS globally which upsets lkdtm rodata
testing.
- Cleanups to ARMs asm/memory.h include.
- L2 cache cleanups.
- Allow flat nommu binaries to be executed on ARM MMU systems.
- Kernel hardening - add more read-only after init annotations,
including making some kernel vdso variables const.
- Ensure AMBA primecell clocks are appropriately defaulted.
- ARM breakpoint cleanup.
- Various StrongARM 11x0 and companion chip (SA1111) updates to bring
this legacy platform to use more modern APIs for (eg) GPIOs and
interrupts, which will allow us in the future to reduce some of the
board-level driver clutter and elimate function callbacks into board
code via platform data. There still appears to be interest in these
platforms!
- Remove the now redundant secure_flush_area() API.
- Module PLT relocation optimisations. Ard says: This series of 4
patches optimizes the ARM PLT generation code that is invoked at
module load time, to get rid of the O(n^2) algorithm that results in
pathological load times of 10 seconds or more for large modules on
certain STB platforms.
- ARMv7M cache maintanence support.
- L2 cache PMU support
* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (35 commits)
ARM: sa1111: provide to_sa1111_device() macro
ARM: sa1111: add sa1111_get_irq()
ARM: sa1111: clean up duplication in IRQ chip implementation
ARM: sa1111: implement a gpio_chip for SA1111 GPIOs
ARM: sa1111: move irq cleanup to separate function
ARM: sa1111: use devm_clk_get()
ARM: sa1111: use devm_kzalloc()
ARM: sa1111: ensure we only touch RAB bus type devices when removing
ARM: 8611/1: l2x0: add PMU support
ARM: 8610/1: V7M: Add dsb before jumping in handler mode
ARM: 8609/1: V7M: Add support for the Cortex-M7 processor
ARM: 8608/1: V7M: Indirect proc_info construction for V7M CPUs
ARM: 8607/1: V7M: Wire up caches for V7M processors with cache support.
ARM: 8606/1: V7M: introduce cache operations
ARM: 8605/1: V7M: fix notrace variant of save_and_disable_irqs
ARM: 8604/1: V7M: Add support for reading the CTR with read_cpuid_cachetype()
ARM: 8603/1: V7M: Add addresses for mem-mapped V7M cache operations
ARM: 8602/1: factor out CSSELR/CCSIDR operations that use cp15 directly
ARM: kernel: avoid brute force search on PLT generation
ARM: kernel: sort relocation sections before allocating PLTs
...
Linus Torvalds [Thu, 6 Oct 2016 14:58:01 +0000 (07:58 -0700)]
Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fix from Russell King:
"A 5% error in delay calculation was introduced during the last merge
window, which had gone un-noticed until yesterday"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: fix delays
NeilBrown [Thu, 4 Aug 2016 00:19:06 +0000 (10:19 +1000)]
exportfs: be careful to only return expected errors.
When nfsd calls fh_to_dentry, it expect ESTALE or ENOMEM as errors.
In particular it can be tempting to return ENOENT, but this is not
handled well by nfsd.
Rather than requiring strict adherence to error code code filesystems,
treat all unexpected error codes the same as ESTALE. This is safest.
Boris Ostrovsky [Wed, 5 Oct 2016 17:09:33 +0000 (13:09 -0400)]
xen/x86: Update topology map for PV VCPUs
Early during boot topology_update_package_map() computes
logical_pkg_ids for all present processors.
Later, when processors are brought up, identify_cpu() updates
these values based on phys_pkg_id which is a function of
initial_apicid. On PV guests the latter may point to a
non-existing node, causing logical_pkg_ids to be set to -1.
Intel's RAPL uses logical_pkg_id (as topology_logical_package_id())
to index its arrays and therefore in this case will point to index
65535 (since logical_pkg_id is a u16). This could lead to either a
crash or may actually access random memory location.
As a workaround, we recompute topology during CPU bringup to reset
logical_pkg_id to a valid value.
(The reason for initial_apicid being bogus is because it is
initial_apicid of the processor from which the guest is launched.
This value is CPUID(1).EBX[31:24])
Ley Foon Tan [Thu, 25 Aug 2016 08:11:59 +0000 (16:11 +0800)]
nios2: use of_property_read_bool
Use of_property_read_bool instead of open-coding it as fpcu_has.
Convert the members of struct cpuinfo from u32 to bool accordingly as
they are only used as boolean anyhow.
Bluetooth: btusb: add entry for Marvell 8997 chipset
btusb_set_bdaddr_marvell() configures BD address for Marvell chipsets.
This patch adds new chipset 8997 in the list so that BD address feature
would be available for it.
Markus Elfring [Tue, 16 Aug 2016 15:10:12 +0000 (17:10 +0200)]
backlight-tosa: Delete unnecessary assignment for the field "owner"
The field "owner" is set by the core.
Thus delete an unneeded initialisation.
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: Markus Elfring <[email protected]> Signed-off-by: Lee Jones <[email protected]>
The problem was introduced when oprofile was converted to use the new
x86 unwinder. When frame pointers are disabled, the "guess" unwinder's
unwind_get_return_address() is an inline function which calls
ftrace_graph_ret_addr(), which is not exported.
Fix it by converting the "guess" version of unwind_get_return_address()
to an exported out-of-line function, just like its frame pointer
counterpart.
Russell King [Wed, 5 Oct 2016 22:40:43 +0000 (23:40 +0100)]
ARM: fix delays
Commit 215e362dafed ("ARM: 8306/1: loop_udelay: remove bogomips value
limitation") tried to increase the bogomips limitation, but in doing
so messed up udelay such that it always gives about a 5% error in the
delay, even if we use a timer.
Originally, UDELAY_MULT was ((UL(2199023) * HZ) >> 11) and UDELAY_SHIFT
30. Assuming HZ=100, us_delay of 1000 and ticks_per_jiffy of 1660000
(eg, 166MHz timer, 1ms delay) this would calculate:
David Howells [Thu, 6 Oct 2016 07:11:51 +0000 (08:11 +0100)]
rxrpc: Don't request an ACK on the last DATA packet of a call's Tx phase
Don't request an ACK on the last DATA packet of a call's Tx phase as for a
client there will be a reply packet or some sort of ACK to shift phase. If
the ACK is requested, OpenAFS sends a REQUESTED-ACK ACK with soft-ACKs in
it and doesn't follow up with a hard-ACK.
If we don't set the flag, OpenAFS will send a DELAY ACK that hard-ACKs the
reply data, thereby allowing the call to terminate cleanly.
David Howells [Thu, 6 Oct 2016 07:11:50 +0000 (08:11 +0100)]
rxrpc: Need to produce an ACK for service op if op takes a long time
We need to generate a DELAY ACK from the service end of an operation if we
start doing the actual operation work and it takes longer than expected.
This will hard-ACK the request data and allow the client to release its
resources.
To make this work:
(1) We have to set the ack timer and propose an ACK when the call moves to
the RXRPC_CALL_SERVER_ACK_REQUEST and clear the pending ACK and cancel
the timer when we start transmitting the reply (the first DATA packet
of the reply implicitly ACKs the request phase).
(2) It must be possible to set the timer when the caller is holding
call->state_lock, so split the lock-getting part of the timer function
out.
(3) Add trace notes for the ACK we're requesting and the timer we clear.
David Howells [Thu, 6 Oct 2016 07:11:50 +0000 (08:11 +0100)]
afs: Check for fatal error when in waiting for ack state
When it's in the waiting-for-ACK state, the AFS filesystem needs to check
the result of rxrpc_kernel_recv_data() any time it is notified to see if it
is indicating a fatal error. If this is the case, it needs to mark the
call completed otherwise the call just sits there and never goes away.
David Howells [Thu, 6 Oct 2016 07:11:50 +0000 (08:11 +0100)]
rxrpc: Return negative error code to kernel service
In rxrpc_kernel_recv_data(), when we return the error number incurred by a
failed call, we must negate it before returning it as it's stored as
positive (that's what we have to pass back to userspace).
David Howells [Thu, 6 Oct 2016 07:11:50 +0000 (08:11 +0100)]
rxrpc: Add missing notification
The call's background processor work item needs to notify the socket when
it completes a call so that recvmsg() or the AFS fs can deal with it.
Without this, call expiry isn't handled.
David Howells [Thu, 6 Oct 2016 07:11:50 +0000 (08:11 +0100)]
rxrpc: Queue the call on expiry
When a call expires, it must be queued for the background processor to deal
with otherwise a service call that is improperly terminated will just sit
there awaiting an ACK and won't expire.
David Howells [Thu, 6 Oct 2016 07:11:49 +0000 (08:11 +0100)]
rxrpc: Partially handle OpenAFS's improper termination of calls
OpenAFS doesn't always correctly terminate client calls that it makes -
this includes calls the OpenAFS servers make to the cache manager service.
It should end the client call with either:
(1) An ACK that has firstPacket set to one greater than the seq number of
the reply DATA packet with the LAST_PACKET flag set (thereby
hard-ACK'ing all packets). nAcks should be 0 and acks[] should be
empty (ie. no soft-ACKs).
(2) An ACKALL packet.
OpenAFS, though, may send an ACK packet with firstPacket set to the last
seq number or less and soft-ACKs listed for all packets up to and including
the last DATA packet.
The transmitter, however, is obliged to keep the call live and the
soft-ACK'd DATA packets around until they're hard-ACK'd as the receiver is
permitted to drop any merely soft-ACK'd packet and request retransmission
by sending an ACK packet with a NACK in it.
Further, OpenAFS will also terminate a client call by beginning the next
client call on the same connection channel. This implicitly completes the
previous call.
This patch handles implicit ACK of a call on a channel by the reception of
the first packet of the next call on that channel.
If another call doesn't come along to implicitly ACK a call, then we have
to time the call out. There are some bugs there that will be addressed in
subsequent patches.
David Howells [Thu, 6 Oct 2016 07:11:49 +0000 (08:11 +0100)]
rxrpc: Fix loss of PING RESPONSE ACK production due to PING ACKs
Separate the output of PING ACKs from the output of other sorts of ACK so
that if we receive a PING ACK and schedule transmission of a PING RESPONSE
ACK, the response doesn't get cancelled by a PING ACK we happen to be
scheduling transmission of at the same time.
If a PING RESPONSE gets lost, the other side might just sit there waiting
for it and refuse to proceed otherwise.
David Howells [Thu, 6 Oct 2016 07:11:49 +0000 (08:11 +0100)]
rxrpc: Fix warning by splitting rxrpc_send_call_packet()
Split rxrpc_send_data_packet() to separate ACK generation (which is more
complicated) from ABORT generation. This simplifies the code a bit and
fixes the following warning:
In file included from ../net/rxrpc/output.c:20:0:
net/rxrpc/output.c: In function 'rxrpc_send_call_packet':
net/rxrpc/ar-internal.h:1187:27: error: 'top' may be used uninitialized in this function [-Werror=maybe-uninitialized]
net/rxrpc/output.c:103:24: note: 'top' was declared here
net/rxrpc/output.c:225:25: error: 'hard_ack' may be used uninitialized in this function [-Werror=maybe-uninitialized]
David Howells [Thu, 6 Oct 2016 07:11:49 +0000 (08:11 +0100)]
rxrpc: Only ping for lost reply in client call
When a reply is deemed lost, we send a ping to find out the other end
received all the request data packets we sent. This should be limited to
client calls and we shouldn't do this on service calls.
David Howells [Thu, 6 Oct 2016 07:11:49 +0000 (08:11 +0100)]
rxrpc: Fix oops on incoming call to serviceless endpoint
If an call comes in to a local endpoint that isn't listening for any
incoming calls at the moment, an oops will happen. We need to check that
the local endpoint's service pointer isn't NULL before we dereference it.
David Howells [Thu, 6 Oct 2016 07:11:48 +0000 (08:11 +0100)]
rxrpc: Accesses of rxrpc_local::service need to be RCU managed
struct rxrpc_local->service is marked __rcu - this means that accesses of
it need to be managed using RCU wrappers. There are two such places in
rxrpc_release_sock() where the value is checked and cleared. Fix this by
using the appropriate wrappers.
This set of patches initiates a series of PCIe performance enhancement patch
submittals.
Patch 1/2 enables version 2 of the SPARC sun4v IOMMU I/O address translation
services need for subsequent enhancements.
Patch 2/2 allows drivers to specify DMA_ATTR_WEAK_ORDERING via DMA attributes
to the SPARC DMA mapping routines enabling "relaxed ordering" for the buffer
being mapped.
[Still relevant write-up]
PCI-Express Relaxed Ordering and the Sun SPARC Enterprise M-class Servers
https://blogs.oracle.com/olympus/entry/relaxed_ordering
====================
chris hyser [Wed, 28 Sep 2016 19:19:50 +0000 (12:19 -0700)]
sparc64: Enable setting "relaxed ordering" in IOMMU mappings
Enable relaxed ordering for memory writes in IOMMU TSB entry from
dma_4v_alloc_coherent(), dma_4v_map_page() and dma_4v_map_sg() when
dma_attrs DMA_ATTR_WEAK_ORDERING is set. This requires PCI IOMMU I/O
Translation Services version 2.0 API.
Many PCIe devices allow enabling relaxed-ordering (memory writes bypassing
other memory writes) for various DMA buffers. A notable exception is the
Mellanox mlx4 IB adapter. Due to the nature of x86 HW this appears to have
little performance impact there. On SPARC HW however, this results in major
performance degradation getting only about 3Gbps. Enabling RO in the IOMMU
entries corresponding to mlx4 data buffers increases the throughput to
about 13 Gbps.
chris hyser [Wed, 28 Sep 2016 19:19:45 +0000 (12:19 -0700)]
sparc64: Enable PCI IOMMU version 2 API
Enable Version 2 of the PCI IOMMU API needed for advanced features
such as PCI Relaxed Ordering and greater than 2 GB DMA address
space per root complex.
Paul Gortmaker [Mon, 19 Sep 2016 21:36:29 +0000 (17:36 -0400)]
sparc: migrate exception table users off module.h and onto extable.h
These files were only including module.h for exception table
related functions. We've now separated that content out into its
own file "extable.h" so now move over to that and avoid all the
extra header content in module.h that we don't really need to compile
these files.
Dan Williams [Thu, 22 Sep 2016 22:42:59 +0000 (15:42 -0700)]
libnvdimm, namespace: unify blk and pmem label scanning
In preparation for allowing multiple namespace per pmem region, unify
blk and pmem label scanning. Given that blk regions already support
multiple namespaces, teaching that path how to do pmem namespace
scanning is an incremental step towards multiple pmem namespace support.
This should be functionally equivalent to the previous state in that
stops after finding the first valid pmem label set.
Dan Williams [Thu, 22 Sep 2016 01:16:21 +0000 (18:16 -0700)]
libnvdimm, namespace: refactor uuid_show() into a namespace_to_uuid() helper
The ability to translate a generic struct device pointer into a
namespace uuid is a useful utility as we go to unify the blk and pmem
label scanning paths.
Linus Torvalds [Thu, 6 Oct 2016 01:18:20 +0000 (18:18 -0700)]
Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu updates from Greg Ungerer:
"The bulk of the changes here are to clean up the ColdFire 5441x SoC
support so that it can run with MMU enabled. We have only supported it
with MMU disabled up to now.
There is also a few individual bug fixes across the ColdFire support
code"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: let clk_disable() return immediately if clk is NULL
m68knommu: convert printk(KERN_INFO) to pr_info()
m68knommu: clean up uClinux boot log output
m68k: generalize uboot command line support
m68k: don't panic if no hardware FPU defined
m68k: only generate FPU instructions if CONFIG_FPU enabled
m68k: always make available dump_fpu()
m68k: generalize io memory region setup for ColdFire ACR registers
m68k: move ColdFire _bootmem_alloc code
m68k: report correct FPU type on ColdFire MMU platforms
m68k: set appropriate machine type for m5411x SoC platforms
m68k: move CONFIG_FPU set to per-CPU configuration
m68knommu: fix IO write size in nettel pin set
m68knommu: switch to using IO access methods in WildFire board code
m68knommu: fix early setup to not access variables
Linus Torvalds [Thu, 6 Oct 2016 00:44:48 +0000 (17:44 -0700)]
Merge tag 'xtensa-20161005' of git://github.com/jcmvbkbc/linux-xtensa
Pull Xtensa updates from Max Filippov:
"Updates for the xtensa architecture. It is a combined set of patches
for 4.8 that never got to the mainline and new patches for 4.9.
- add new kernel memory layouts for MMUv3 cores: with 256MB and 512MB
KSEG size, starting at physical address other than 0
- make kernel load address configurable
- clean up kernel memory layout macros
- drop sysmem early allocator and switch to memblock
- enable kmemleak and memory reservation from the device tree
- wire up new syscalls: userfaultfd, membarrier, mlock2,
copy_file_range, preadv2 and pwritev2
- add new platform: Cadence Configurable System Platform (CSP) and
new core variant for it: xt_lnx
- rearrange CCOUNT calibration code, make most of it generic
- improve machine reset code (XTFPGA now reboots reliably with MMUv3
cores)
- provide default memmap command line option for configurations
without device tree support
- ISS fixes: simdisk is now capable of using highmem pages, panic
correctly terminates simulator"
* tag 'xtensa-20161005' of git://github.com/jcmvbkbc/linux-xtensa: (24 commits)
xtensa: disable MMU initialization option on MMUv2 cores
xtensa: add default memmap and mmio32native options to defconfigs
xtensa: add default memmap option to common_defconfig
xtensa: add default memmap option to iss_defconfig
xtensa: ISS: allow simdisk to use high memory buffers
xtensa: ISS: define simc_exit and use it instead of inline asm
xtensa: xtfpga: group platform_* functions together
xtensa: rearrange CCOUNT calibration
xtensa: xtfpga: use clock provider, don't update DT
xtensa: Tweak xuartps UART driver Rx watermark for Cadence CSP config.
xtensa: initialize MMU before jumping to reset vector
xtensa: fix icountlevel setting in cpu_reset
xtensa: extract common CPU reset code into separate function
xtensa: Added Cadence CSP kernel configuration for Xtensa
xtensa: fix default kernel load address
xtensa: wire up new syscalls
xtensa: support reserved-memory DT node
xtensa: drop sysmem and switch to memblock
xtensa: minimize use of PLATFORM_DEFAULT_MEM_{ADDR,SIZE}
xtensa: cleanup MMU setup and kernel layout macros
...
Darrick J. Wong [Mon, 3 Oct 2016 16:11:53 +0000 (09:11 -0700)]
xfs: implement swapext for rmap filesystems
Implement swapext for filesystems that have reverse mapping. Back in
the reflink patches, we augmented the bmap code with a 'REMAP' flag
that updates only the bmbt and doesn't touch the allocator and
implemented log redo items for those two operations. Now we can
rewrite extent swapping as a (looong) series of remap operations.
This is far less efficient than the fork swapping method implemented
in the past, so we only switch this on for rmap.
Darrick J. Wong [Mon, 3 Oct 2016 16:11:53 +0000 (09:11 -0700)]
xfs: refactor swapext code
Refactor the swapext function to pull out the fork swapping piece
into a separate function. In the next patch we'll add in the bit
we need to make it work with rmap filesystems.
Darrick J. Wong [Mon, 3 Oct 2016 16:11:51 +0000 (09:11 -0700)]
xfs: simulate per-AG reservations being critically low
Create an error injection point that enables us to simulate being
critically low on per-AG block reservations. This should enable us to
simulate this specific ENOSPC condition so that we can test falling back
to a regular file copy.
projects / linux.git / log