Naveen N. Rao [Tue, 5 Oct 2021 20:25:20 +0000 (01:55 +0530)]
powerpc/lib: Add helper to check if offset is within conditional branch range
Add a helper to check if a given offset is within the branch range for a
powerpc conditional branch instruction, and update some sites to use the
new helper.
Linus Torvalds [Thu, 7 Oct 2021 01:26:36 +0000 (18:26 -0700)]
Merge tag 'devicetree-fixes-for-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Add another allowed address for TI sn65dsi86
- Drop more redundant minItems/maxItems
- Fix more graph 'unevaluatedProperties' warnings in media bindings
* tag 'devicetree-fixes-for-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: drm/bridge: ti-sn65dsi86: Fix reg value
dt-bindings: Drop more redundant 'maxItems/minItems'
dt-bindings: media: Fix more graph 'unevaluatedProperties' related warnings
George Shen [Fri, 1 Oct 2021 14:36:09 +0000 (22:36 +0800)]
drm/amd/display: Skip override for preferred link settings during link training
[Why]
Overriding link setting inside override_training_settings
result in fallback link settings being ignored. This can
potentially cause link training to always fail and consequently
result in an infinite loop of link training to occur in
dp_verify_link_cap during detection.
[How]
Since preferred link settings are already considered inside
decide_link_settings, skip the check in override_training_settings
to avoid infinite link training loops.
If nfsd has existing listening sockets without any processes, then an error
returned from svc_create_xprt() for an additional transport will remove
those existing listeners. We're seeing this in practice when userspace
attempts to create rpcrdma transports without having the rpcrdma modules
present before creating nfsd kernel processes. Fix this by checking for
existing sockets before calling nfsd_destroy().
Stefan Assmann [Tue, 24 Aug 2021 10:06:39 +0000 (12:06 +0200)]
iavf: fix double unlock of crit_lock
The crit_lock mutex could be unlocked twice as reported here
https://lists.osuosl.org/pipermail/intel-wired-lan/Week-of-Mon-20210823/025525.html
Remove the superfluous unlock. Technically the problem was already
present before 5ac49f3c2702 as that commit only replaced the locking
primitive, but no functional change.
Reported-by: Dan Carpenter <[email protected]> Fixes: 5ac49f3c2702 ("iavf: use mutexes for locking of critical sections") Fixes: bac8486116b0 ("iavf: Refactor the watchdog state machine") Signed-off-by: Stefan Assmann <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
i40e: Fix freeing of uninitialized misc IRQ vector
When VSI set up failed in i40e_probe() as part of PF switch set up
driver was trying to free misc IRQ vectors in
i40e_clear_interrupt_scheme and produced a kernel Oops:
The problem is that at that point misc IRQ vectors
were not allocated yet and we get a call trace
that driver is trying to free already free IRQ vectors.
Add a check in i40e_clear_interrupt_scheme for __I40E_MISC_IRQ_REQUESTED
PF state before calling i40e_free_misc_vector. This state is set only if
misc IRQ vectors were properly initialized.
The loop in i40e_get_capabilities can never end. The problem is that
although i40e_aq_discover_capabilities returns with an error if there's
a firmware problem, the returned error is not checked. There is a check for
pf->hw.aq.asq_last_status but that value is set to I40E_AQ_RC_OK on most
firmware problems.
When i40e_aq_discover_capabilities encounters a firmware problem, it will
encounter the same problem on its next invocation. As the result, the loop
becomes endless. We hit this with I40E_ERR_ADMIN_QUEUE_TIMEOUT but looking
at the code, it can happen with a range of other firmware errors.
I don't know what the correct behavior should be: whether the firmware
should be retried a few times, or whether pf->hw.aq.asq_last_status should
be always set to the encountered firmware error (but then it would be
pointless and can be just replaced by the i40e_aq_discover_capabilities
return value). However, the current behavior with an endless loop under the
rtnl mutex(!) is unacceptable and Intel has not submitted a fix, although we
explained the bug to them 7 months ago.
This may not be the best possible fix but it's better than hanging the whole
system on a firmware bug.
changed the warning to only fire if the CPU supports SMAP.
However, the warning can still trigger on a machine that supports SMAP
but where it's disabled in the kernel config and when running the
syscall_nt selftest, for example:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 49 at irqentry_enter_from_user_mode
CPU: 0 PID: 49 Comm: init Tainted: G T 5.15.0-rc4+ #98 e6202628ee053b4f310759978284bd8bb0ce6905
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
RIP: 0010:irqentry_enter_from_user_mode
...
Call Trace:
? irqentry_enter
? exc_general_protection
? asm_exc_general_protection
? asm_exc_general_protectio
IS_ENABLED(CONFIG_X86_SMAP) could be added to the warning condition, but
even this would not be enough in case SMAP is disabled at boot time with
the "nosmap" parameter.
To be consistent with "nosmap" behaviour, clear X86_FEATURE_SMAP when
!CONFIG_X86_SMAP.
x86/hyperv: Avoid erroneously sending IPI to 'self'
__send_ipi_mask_ex() uses an optimization: when the target CPU mask is
equal to 'cpu_present_mask' it uses 'HV_GENERIC_SET_ALL' format to avoid
converting the specified cpumask to VP_SET. This case was overlooked when
'exclude_self' parameter was added. As the result, a spurious IPI to
'self' can be send.
Arnd Bergmann [Wed, 6 Oct 2021 15:36:33 +0000 (17:36 +0200)]
Merge tag 'imx-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.15, round 2:
- A couple of fixes from Haibo Chen to update SPI NOR TX bus width for
i.MX6 and i.MX8 boards. This becomes necessary because spi-nor driver
starts using the setting in DT.
- Mark buck2 always-on for i.MX8MM Kontron-n801x-som board to avoid the
core supply being turned off unexpectedly.
- Fix eSDHC2 device tree settings for LS1028A SoC.
- Disable GIC CPU interface before calling stby-poweroff sequence to fix
power-off failure on i.MX6.
- Fix M2_RST# GPIO pinmux on i.MX8M venice-gw7902 boards.
* tag 'imx-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8m*-venice-gw7902: fix M2_RST# gpio
ARM: imx6: disable the GIC CPU interface before calling stby-poweroff sequence
arm64: dts: ls1028a: fix eSDHC2 node
arm64: dts: imx8mm-kontron-n801x-som: do not allow to switch off buck2
arm64: dts: imx8: change the spi-nor tx
ARM: dts: imx: change the spi-nor tx
Neil Armstrong [Tue, 28 Sep 2021 07:36:52 +0000 (09:36 +0200)]
mmc: meson-gx: do not use memcpy_to/fromio for dram-access-quirk
The memory at the end of the controller only accepts 32bit read/write
accesses, but the arm64 memcpy_to/fromio implementation only uses 64bit
(which will be split into two 32bit access) and 8bit leading to incomplete
copies to/from this memory when the buffer is not multiple of 8bytes.
Add a local copy using writel/readl accesses to make sure we use the right
memory access width.
The switch to memcpy_to/fromio was done because of 285133040e6c
("arm64: Import latest memcpy()/memmove() implementation"), but using memcpy
worked before since it mainly used 32bit memory acceses.
Marcel Ziswiler [Wed, 6 Oct 2021 06:31:04 +0000 (08:31 +0200)]
dt-bindings: net: dsa: marvell: fix compatible in example
While the MV88E6390 switch chip exists, one is supposed to use a
compatible of "marvell,mv88e6190" for it. Fix this in the given example.
Signed-off-by: Marcel Ziswiler <[email protected]> Fixes: a3c53be55c95 ("net: dsa: mv88e6xxx: Support multiple MDIO busses") Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Shannon Nelson [Tue, 5 Oct 2021 23:11:05 +0000 (16:11 -0700)]
ionic: move filter sync_needed bit set
Move the setting of the filter-sync-needed bit to the error
case in the filter add routine to be sure we're checking the
live filter status rather than a copy of the pre-sync status.
Fixes: 969f84394604 ("ionic: sync the filters in the work task") Signed-off-by: Shannon Nelson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
But if_nlmsg_stats_size() never considered the needed storage.
This bug did not show up because alloc_skb(X) allocates skb with
extra tailroom, because of added alignments. This could very well
be changed in the future to have deterministic behavior.
Fixes: ede3fcf5ec67f ("gve: Add support for raw addressing to the rx path") Signed-off-by: Catherine Sullivan <[email protected]> Signed-off-by: Jeroen de Borst <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Tao Liu [Wed, 6 Oct 2021 02:42:20 +0000 (19:42 -0700)]
gve: Avoid freeing NULL pointer
Prevent possible crashes when cleaning up after unsuccessful
initializations.
Fixes: 893ce44df5658 ("gve: Add basic driver framework for Compute Engine Virtual NIC") Signed-off-by: Tao Liu <[email protected]> Signed-off-by: Catherine Sully <[email protected]> Signed-off-by: David S. Miller <[email protected]>
The qpl_map_size is rounded up to a multiple of sizeof(long), but the
number of qpls doesn't have to be.
Fixes: f5cedc84a30d2 ("gve: Add transmit and receive support") Signed-off-by: Catherine Sullivan <[email protected]> Signed-off-by: Jeroen de Borst <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Jiang Wang [Mon, 4 Oct 2021 23:25:28 +0000 (23:25 +0000)]
unix: Fix an issue in unix_shutdown causing the other end read/write failures
Commit 94531cfcbe79 ("af_unix: Add unix_stream_proto for sockmap") sets
unix domain socket peer state to TCP_CLOSE in unix_shutdown. This could
happen when the local end is shutdown but the other end is not. Then,
the other end will get read or write failures which is not expected.
Fix the issue by setting the local state to shutdown.
Wong Vee Khee [Tue, 5 Oct 2021 11:51:00 +0000 (19:51 +0800)]
net: stmmac: trigger PCS EEE to turn off on link down
The current implementation enable PCS EEE feature in the event of link
up, but PCS EEE feature is not disabled on link down.
This patch makes sure PCE EEE feature is disabled on link down.
Fixes: 656ed8b015f1 ("net: stmmac: fix EEE init issue when paired with EEE capable PHYs") Signed-off-by: Wong Vee Khee <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Wong Vee Khee [Tue, 5 Oct 2021 11:50:59 +0000 (19:50 +0800)]
net: pcs: xpcs: fix incorrect steps on disable EEE
When Energy-Efficient Ethernet(EEE) is disable from the MAC side,
we need to clear the DW_VR_MII_EEE_TRN_LPI bit of DW_VR_MII_EEE_MCTRL1
register.
Fixes: 7617af3d1a5e ("net: pcs: Introducing support for DWC xpcs Energy Efficient Ethernet") Cc: Michael Sit Wei Hong <[email protected]> Signed-off-by: Wong Vee Khee <[email protected]> Signed-off-by: David S. Miller <[email protected]>
firmware: arm_scmi: Add proper barriers to scmi virtio device
Only one single SCMI Virtio device is currently supported by this driver
and it is referenced using a static global variable which is initialized
once for all during probing and nullified at virtio device removal.
Add proper SMP barriers to protect accesses to such device reference to
ensure that the initialzation state of such device is correctly observed by
all PEs at any time.
Return -EBUSY, instead of -EINVAL, and a descriptive error message if more
than one SCMI Virtio device is ever found and probed.
Jeremy Cline [Thu, 3 Dec 2020 00:02:20 +0000 (19:02 -0500)]
drm/nouveau: avoid a use-after-free when BO init fails
nouveau_bo_init() is backed by ttm_bo_init() and ferries its return code
back to the caller. On failures, ttm_bo_init() invokes the provided
destructor which should de-initialize and free the memory.
Thus, when nouveau_bo_init() returns an error the gem object has already
been released and the memory freed by nouveau_bo_del_ttm().
Mark Brown [Tue, 21 Sep 2021 21:21:02 +0000 (22:21 +0100)]
video: fbdev: gbefb: Only instantiate device when built for IP32
The gbefb driver not only registers a driver but also the device for that
driver. This is all well and good when run on the IP32 machines that are
supported by the driver but since the driver supports building with
COMPILE_TEST we might also be building on other platforms which do not have
this hardware and will crash instantiating the driver. Add an IS_ENABLED()
check so we compile out the device registration if we don't have the Kconfig
option for the machine enabled.
Configurations with both CONFIG_FB_SIMPLE=y and CONFIG_DRM_SIMPLEDRM=m
are allowed by Kconfig because the 'depends on !DRM_SIMPLEDRM' dependency
does not disallow FB_SIMPLE as long as SIMPLEDRM is not built-in. This
can however result in a build failure when cfb_fillrect() etc are then
also in loadable modules:
x86_64-linux-ld: drivers/video/fbdev/simplefb.o:(.rodata+0x1f8): undefined reference to `cfb_fillrect'
x86_64-linux-ld: drivers/video/fbdev/simplefb.o:(.rodata+0x200): undefined reference to `cfb_copyarea'
x86_64-linux-ld: drivers/video/fbdev/simplefb.o:(.rodata+0x208): undefined reference to `cfb_imageblit'
To work around this, change FB_SIMPLE to be a 'tristate' symbol,
which still allows both to be =m together, but not one of them to
be =y if the other one is =m. If a distro kernel picks this
configuration, it can be determined by local policy which of
the two modules gets loaded. The 'of_chosen' export is needed
as this is the first loadable module referencing it.
Alternatively, the Kconfig dependency could be changed to
'depends on DRM_SIMPLEDRM=n', which would forbid the configuration
with both drivers.
Chris Morgan [Thu, 16 Sep 2021 20:29:07 +0000 (15:29 -0500)]
drm/rockchip: Update crtc fixup to account for fractional clk change
After commit 928f9e268611 ("clk: fractional-divider: Hide
clk_fractional_divider_ops from wide audience") was merged it appears
that the DSI panel on my Odroid Go Advance stopped working. Upon closer
examination of the problem, it looks like it was the fixup in the
rockchip_drm_vop.c file was causing the issue. The changes made to the
clk driver appear to change some assumptions made in the fixup.
After debugging the working 5.14 kernel and the no-longer working
5.15 kernel, it looks like this was broken all along but still
worked, whereas after the fractional clock change it stopped
working despite the issue (it went from sort-of broken to very broken).
In the 5.14 kernel the dclk_vopb_frac was being requested to be set to 17000999 on my board. The clock driver was taking the value of the
parent clock and attempting to divide the requested value from it
(17000000/17000999 = 0), then subtracting 1 from it (making it -1),
and running it through fls_long to get 64. It would then subtract
the value of fd->mwidth from it to get 48, and then bit shift 17000999 to the left by 48, coming up with a very large number of 7649082492112076800. This resulted in a numerator of 65535 and a
denominator of 1 from the clk driver. The driver seemingly would
try again and get a correct 1:1 value later, and then move on.
Output from my 5.14 kernel (with some printfs for good measure):
[ 2.830066] rockchip-drm display-subsystem: bound ff460000.vop (ops vop_component_ops)
[ 2.839431] rockchip-drm display-subsystem: bound ff450000.dsi (ops dw_mipi_dsi_rockchip_ops)
[ 2.855980] Clock is dclk_vopb_frac
[ 2.856004] Scale 64, Rate 7649082492112076800, Oldrate 17000999, Parent Rate 17000000, Best Numerator 65535, Best Denominator 1, fd->mwidth 16
[ 2.903529] Clock is dclk_vopb_frac
[ 2.903556] Scale 0, Rate 17000000, Oldrate 17000000, Parent Rate 17000000, Best Numerator 1, Best Denominator 1, fd->mwidth 16
[ 2.903579] Clock is dclk_vopb_frac
[ 2.903583] Scale 0, Rate 17000000, Oldrate 17000000, Parent Rate 17000000, Best Numerator 1, Best Denominator 1, fd->mwidth 16
Contrast this with 5.15 after the clk change where the rate of 17000999
was getting passed and resulted in numerators/denomiators of 17001/
17000.
Output from my 5.15 kernel (with some printfs added for good measure):
[ 2.817571] rockchip-drm display-subsystem: bound ff460000.vop (ops vop_component_ops)
[ 2.826975] rockchip-drm display-subsystem: bound ff450000.dsi (ops dw_mipi_dsi_rockchip_ops)
[ 2.843430] Rate 17000999, Parent Rate 17000000, Best Numerator 17018, Best Denominator 17017
[ 2.891073] Rate 17001000, Parent Rate 17000000, Best Numerator 17001, Best Denominator 17000
[ 2.891269] Rate 17001000, Parent Rate 17000000, Best Numerator 17001, Best Denominator 17000
[ 2.891281] Rate 17001000, Parent Rate 17000000, Best Numerator 17001, Best Denominator 17000
I have tested the change extensively on my Odroid Go Advance (Rockchip
RK3326) and it appears to work well. However, this change will affect
all Rockchip SoCs that use this driver so I believe further testing
is warranted. Please note that without this change I can confirm
at least all PX30s with DSI panels will stop working with the 5.15
kernel.
Upon advice from Doug Anderson <[email protected]> it was decided
that we would first check if the clock rate can be set exactly as
requested, and only if it could not would we then add 999 to it and
attempt the process again. This way we can preserve the behavior for
clocks that still need it while resolving the specific issue for the
PX30 and DSI panels (since it is using a fractional clock).
Changes since v2:
- Moved fixes to correct location.
Changes since v1:
- Made the addition of 999 conditional based on whether the clock
subsystem can set the actual clock rate as requested.
- Updated the notes in the fixup routine to reflect this new behavior.
- Added reference to original commit, as this has technically been
broken since then however only now is it an issue due to the clock
changes.
Ben Skeggs [Thu, 16 Sep 2021 22:04:06 +0000 (08:04 +1000)]
drm/nouveau/ga102-: support ttm buffer moves via copy engine
We don't currently have any kind of real acceleration on Ampere GPUs,
but the TTM memcpy() fallback paths aren't really designed to handle
copies between different devices, such as on Optimus systems, and
result in a kernel OOPS.
A few options were investigated to try and fix this, but didn't work
out, and likely would have resulted in a very unpleasant experience
for users anyway.
This commit adds just enough support for setting up a single channel
connected to a copy engine, which the kernel can use to accelerate
the buffer copies between devices. Userspace has no access to this
incomplete channel support, but it's suitable for TTM's needs.
A more complete implementation of host(fifo) for Ampere GPUs is in
the works, but the required changes are far too invasive that they
would be unsuitable to backport to fix this issue on current kernels.
v2: fix GPFIFO length in RAMFC (reported by Karol)
Recent rework, which made HDMI PHY driver a platform device, inadvertely
reversed clock setup order. HW is very touchy about it. Proper way is to
handle controllers resets and clocks first and HDMI PHYs second.
Currently, without this fix, first mode set completely fails (nothing on
HDMI monitor) on H3 era PHYs. On H6, it still somehow work.
Move HDMI PHY reset & clocks handling to sun8i_hdmi_phy_init() which
will assure that code is executed after controllers reset & clocks are
handled. Additionally, add sun8i_hdmi_phy_deinit() which will deinit
them at controllers driver unload.
Maxime Ripard [Thu, 19 Aug 2021 14:07:53 +0000 (16:07 +0200)]
drm/vc4: hdmi: Remove unused struct
Commitc7d30623540b ("drm/vc4: hdmi: Remove unused struct") removed the
references to the vc4_hdmi_audio_widgets and vc4_hdmi_audio_routes
structures, but not the structures themselves resulting in two warnings.
Remove it.
ksmbd: add the check to vaildate if stream protocol length exceeds maximum value
This patch add MAX_STREAM_PROT_LEN macro and check if stream protocol
length exceeds maximum value. opencode pdu size check in
ksmbd_pdu_size_has_room().
Tony Lindgren [Wed, 8 Sep 2021 05:49:36 +0000 (08:49 +0300)]
bus: ti-sysc: Use CLKDM_NOAUTO for dra7 dcan1 for errata i893
Commit 94f6345712b3 ("bus: ti-sysc: Implement quirk handling for
CLKDM_NOAUTO") should have also added the quirk for dra7 dcan1 in
addition to dcan2 for errata i893 handling.
Let's also pass the quirk flag for legacy mode booting for if "ti,hwmods"
dts property is used with related dcan hwmod data. This should be only
needed if anybody needs to git bisect earlier stable trees though.
Fixes: 94f6345712b3 ("bus: ti-sysc: Implement quirk handling for CLKDM_NOAUTO") Signed-off-by: Tony Lindgren <[email protected]>
Guenter Roeck [Sun, 1 Aug 2021 17:36:59 +0000 (10:36 -0700)]
xtensa: xtfpga: Try software restart before simulating CPU reset
Rebooting xtensa images loaded with the '-kernel' option in qemu does
not work. When executing a reboot command, the qemu session either hangs
or experiences an endless sequence of error messages.
Kernel panic - not syncing: Unrecoverable error in exception handler
Reset code jumps to the CPU restart address, but Linux can not recover
from there because code and data in the kernel init sections have been
discarded and overwritten at this point.
XTFPGA platforms have a means to reset the CPU by writing 0xdead into a
specific FPGA IO address. When used in QEMU the kernel image loaded with
the '-kernel' option gets restored to its original state allowing the
machine to boot successfully.
Use that mechanism to attempt a platform reset. If it does not work,
fall back to the existing mechanism.
Max Filippov [Tue, 5 Oct 2021 18:36:01 +0000 (11:36 -0700)]
xtensa: xtfpga: use CONFIG_USE_OF instead of CONFIG_OF
Use platform data to initialize xtfpga device drivers when CONFIG_USE_OF
is not selected. This fixes xtfpga networking when CONFIG_USE_OF is not
selected but CONFIG_OF is.
Joe Lawrence [Sun, 22 Aug 2021 22:50:36 +0000 (18:50 -0400)]
objtool: Make .altinstructions section entry size consistent
Commit e31694e0a7a7 ("objtool: Don't make .altinstructions writable")
aligned objtool-created and kernel-created .altinstructions section
flags, but there remains a minor discrepency in their use of a section
entry size: objtool sets one while the kernel build does not.
While sh_entsize of sizeof(struct alt_instr) seems intuitive, this small
deviation can cause failures with external tooling (kpatch-build).
Fix this by creating new .altinstructions sections with sh_entsize of 0
and then later updating sec->sh_size as alternatives are added to the
section. An added benefit is avoiding the data descriptor and buffer
created by elf_create_section(), but previously unused by
elf_add_alternative().
Josh Poimboeuf [Mon, 4 Oct 2021 17:07:50 +0000 (10:07 -0700)]
objtool: Remove reloc symbol type checks in get_alt_entry()
Converting a special section's relocation reference to a symbol is
straightforward. No need for objtool to complain that it doesn't know
how to handle it. Just handle it.
This fixes the following warning:
arch/x86/kvm/emulate.o: warning: objtool: __ex_table+0x4: don't know how to handle reloc symbol type: kvm_fastop_exception
The Topdown metrics events were added as 'perf stat' default events
since commit 42641d6f4d15e6db ("perf stat: Add Topdown metrics events as
default events").
However, the perf attr tests were not updated
accordingly.
The perf attr test fails on the platform which supports Topdown metrics.
# perf test 17
17: Setup struct perf_event_attr :FAILED!
Add Topdown metrics events into perf attr test cases. Make them optional
since they are only available on newer platforms.
Linus Torvalds [Tue, 5 Oct 2021 17:52:53 +0000 (10:52 -0700)]
Merge tag 'warning-fixes-20211005' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull misc fs warning fixes from David Howells:
"The first four patches fix kerneldoc warnings in fscache, afs, 9p and
nfs - they're mostly just comment changes, though there's one place in
9p where a comment got detached from the function it was attached to
(v9fs_fid_add) and has to switch places with a function that got
inserted between (__add_fid).
The patch on the end removes an unused symbol in fscache"
* tag 'warning-fixes-20211005' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
fscache: Remove an unused static variable
fscache: Fix some kerneldoc warnings shown up by W=1
9p: Fix a bunch of kerneldoc warnings shown up by W=1
afs: Fix kerneldoc warning shown up by W=1
nfs: Fix kerneldoc warning shown up by W=1
Which entails no changes in the tooling side as it doesn't introduce new
SNDRV_PCM_IOCTL_ ioctls.
To silence this perf tools build warning:
Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h'
diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h
perf build: Fix plugin static linking with libopencsd on ARM and ARM64
Filter out -static flag when building plugins as they are always built
as dynamic libraries and -static and -dynamic don't work well together
on arm and arm64.
Guchun Chen [Fri, 1 Oct 2021 01:48:50 +0000 (09:48 +0800)]
drm/amdgpu: handle the case of pci_channel_io_frozen only in amdgpu_pci_resume
In current code, when a PCI error state pci_channel_io_normal is detectd,
it will report PCI_ERS_RESULT_CAN_RECOVER status to PCI driver, and PCI
driver will continue the execution of PCI resume callback report_resume by
pci_walk_bridge, and the callback will go into amdgpu_pci_resume
finally, where write lock is releasd unconditionally without acquiring
such lock first. In this case, a deadlock will happen when other threads
start to acquire the read lock.
To fix this, add a member in amdgpu_device strucutre to cache
pci_channel_state, and only continue the execution in amdgpu_pci_resume
when it's pci_channel_io_frozen.
Lijo Lazar [Fri, 1 Oct 2021 08:49:07 +0000 (16:49 +0800)]
drm/amdgpu: During s0ix don't wait to signal GFXOFF
In the rare event when GFX IP suspend coincides with a s0ix entry, don't
schedule a delayed work, instead signal PMFW immediately to allow GFXOFF
entry. GFXOFF is a prerequisite for s0ix entry. PMFW needs to be
signaled about GFXOFF status before amd-pmc module passes OS HINT
to PMFW telling that everything is ready for a safe s0ix entry.
ARM: sharpsl_param: work around -Wstringop-overread warning
gcc warns that accessing a pointer based on a numeric constant may
be an offset into a NULL pointer, and would therefore has zero
accessible bytes:
arch/arm/common/sharpsl_param.c: In function ‘sharpsl_save_param’:
arch/arm/common/sharpsl_param.c:43:9: error: ‘memcpy’ reading 64 bytes from a region of size 0 [-Werror=stringop-overread]
43 | memcpy(&sharpsl_param, param_start(PARAM_BASE), sizeof(struct sharpsl_param_info));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In this particular case, the warning is bogus since this is the actual
pointer, not an offset on a NULL pointer. Add a local variable to shut
up the warning and hope it doesn't come back.
Arnd Bergmann [Tue, 5 Oct 2021 13:41:15 +0000 (15:41 +0200)]
Merge tag 'imx-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.15:
- Revert cc8870bf4c3a to fix the regression on i.MX6 that suspend
support becomes broken.
- Add `qca,clk-out-frequency` property to fix Ethernet support on
imx6qdl-pico board.
- Re-enable FB support in imx_v6_v7_defconfig. It gets lost due to f611b1e7624c ("drm: Avoid circular dependencies for CONFIG_FB").
- Fix LP5562 LED support on imx6dl-yapp4 board.
- Add missing pinctrl-names for panel on M53Menlo board.
- Fix USB host power regulator polarity on M53Menlo board.
* tag 'imx-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: enable fb
ARM: dts: imx6qdl-pico: Fix Ethernet support
ARM: dts: imx: Fix USB host power regulator polarity on M53Menlo
ARM: dts: imx: Add missing pinctrl-names for panel on M53Menlo
Revert "ARM: imx6q: drop of_platform_default_populate() from init_machine"
ARM: dts: imx6dl-yapp4: Fix lp5562 LED driver probe
This can cause a randconfig warning without the 'inline' flag
that every other platform uses:
In file included from arch/arm/boot/compressed/misc.c:29:
arch/arm/mach-dove/include/mach/uncompress.h:14:13: error: 'putc' defined but not used [-Werror=unused-function]
14 | static void putc(const char c)
| ^~~~
ARM: omap1: move omap15xx local bus handling to usb.c
Commit 38225f2ef2f4 ("ARM/omap1: switch to use dma_direct_set_offset for
lbus DMA offsets") removed a lot of mach/memory.h, but left the USB
offset handling split into arch/arm/mach-omap1/usb.c and
drivers/usb/host/ohci-omap.c.
This can cause a randconfig build warning that now fails the build
with -Werror:
arch/arm/mach-omap1/usb.c:561:30: error: 'omap_1510_usb_ohci_nb' defined but not used [-Werror=unused-variable]
561 | static struct notifier_block omap_1510_usb_ohci_nb = {
| ^~~~~~~~~~~~~~~~~~~~~
Move it all into the platform file to get rid of the final
location that relies on mach/memory.h.
Arnd Bergmann [Tue, 5 Oct 2021 13:38:03 +0000 (15:38 +0200)]
Merge tag 'qcom-drivers-fixes-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm driver fixes for v5.15
This restricts the QCOM_SCM driver to depend on ARCH_QCOM, to reduce
it's presence after becoming a loadable module.
It then fixes a regression in the mdt_loader, where firmware with the
hash segment marked as PT_LOAD would no longer be accepted, preventing
several MSM8974 and SDM660 devices from loading remoteproc firmware.
Lastly it corrects the drvdata associated with the socinfo device during
probe, to match that expected by the remove function.
* tag 'qcom-drivers-fixes-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
firmware: qcom_scm: QCOM_SCM should depend on ARCH_QCOM
soc: qcom: mdt_loader: Drop PT_LOAD check on hash segment
soc: qcom: socinfo: Fixed argument passed to platform_set_data()
Arnd Bergmann [Tue, 5 Oct 2021 13:37:02 +0000 (15:37 +0200)]
Merge tag 'qcom-arm64-fixes-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm ARM64 DTS fixes for 5.15
This starts by reverting the SC7280 CPUfreq update, which was merged
before concensus about the associated drivers changes was reached.
It then moves the reserved-memory changes done to get IPA working on the
Lenovo Yoga C630 into the Yoga specific DTS, as changing the memory map
on the platform level did break a couple of the other boards.
It fixes the HDMI audio on Trogdor and add missing Aggre2 NOC qos clocks
on SDM6{30,36,60} which prevented some boards from booting.
Lastly it enables the PON module on SM8250/QRB5165, as the lack thereof
is blocking automated testing in LKFT.
* tag 'qcom-arm64-fixes-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sdm630: Add missing a2noc qos clocks
arm64: dts: qcom: qrb5165-rb5: enabled pwrkey and resin nodes
arm64: dts: qcom: pm8150: specify reboot mode magics
arm64: dts: qcom: pm8150: use qcom,pm8998-pon binding
arm64: dts: qcom: sc7180-trogdor: Fix lpass dai link for HDMI
arm64: dts: qcom: sdm850-yoga: Reshuffle IPA memory mappings
Revert "arm64: dts: qcom: sc7280: Fixup the cpufreq node"
Arnd Bergmann [Tue, 5 Oct 2021 13:36:02 +0000 (15:36 +0200)]
Merge tag 'juno-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Juno/Vexpress fixes for v5.15
Bunch of DTS fixes to resolve addressing issues with some of the device
nodes, dropping unused/undocumented properties in various nodes, and
aligning node names with dtschema.
* tag 'juno-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm: dts: vexpress: Fix motherboard bus 'interrupt-map'
arm: dts: vexpress: Fix addressing issues with 'motherboard-bus' nodes
arm: dts: vexpress-v2p-ca9: Fix the SMB unit-address
arm: dts: vexpress: Drop unused properties from motherboard node
arm64: dts: arm: drop unused interrupt-names in MHU
ARM: dts: arm: align watchdog and mmc node names with dtschema
arm64: dts: arm: align watchdog and mmc node names with dtschema
arm64: dts: fvp: Remove panel timings
Arnd Bergmann [Tue, 5 Oct 2021 13:33:31 +0000 (15:33 +0200)]
Merge tag 'qcom-dts-fixes-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm DTS fixes for v5.15
This corrects the use of depricated chipid and clock names, for which
support was finally dropped from the driver. It also ensures that the
DSI PLL is fed by the correct clock, now that it's being migrated to not
rely on global clock names.
* tag 'qcom-dts-fixes-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: apq8064: update Adreno clock names
ARM: dts: qcom: apq8064: Use 27MHz PXO clock as DSI PLL reference
ARM: dts: qcom: apq8064: use compatible which contains chipid
Arnd Bergmann [Tue, 5 Oct 2021 13:32:30 +0000 (15:32 +0200)]
Merge tag 'at91-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes
AT91 fixes #2 for 5.15:
- More fixes for AT91 platform power management code related to the
introduction of sama7g5:
- management of DDR3L regulator rails for sama7g5ek
- loading of TLB on different cores
- PIO controller slew-rate settings for sama7g5ek: be aligned with
datasheet requirements.
* tag 'at91-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sama7g5ek: to not touch slew-rate for SDMMC pins
ARM: dts: at91: sama7g5ek: use proper slew-rate settings for GMACs
ARM: at91: pm: preload base address of controllers in tlb
ARM: at91: pm: group constants and addresses loading
ARM: dts: at91: sama7g5ek: add suspend voltage for ddr3l rail
Eric Dumazet [Mon, 4 Oct 2021 21:24:15 +0000 (14:24 -0700)]
netlink: annotate data races around nlk->bound
While existing code is correct, KCSAN is reporting
a data-race in netlink_insert / netlink_sendmsg [1]
It is correct to read nlk->bound without a lock, as netlink_autobind()
will acquire all needed locks.
[1]
BUG: KCSAN: data-race in netlink_insert / netlink_sendmsg
write to 0xffff8881031c8b30 of 1 bytes by task 18752 on cpu 0:
netlink_insert+0x5cc/0x7f0 net/netlink/af_netlink.c:597
netlink_autobind+0xa9/0x150 net/netlink/af_netlink.c:842
netlink_sendmsg+0x479/0x7c0 net/netlink/af_netlink.c:1892
sock_sendmsg_nosec net/socket.c:703 [inline]
sock_sendmsg net/socket.c:723 [inline]
____sys_sendmsg+0x360/0x4d0 net/socket.c:2392
___sys_sendmsg net/socket.c:2446 [inline]
__sys_sendmsg+0x1ed/0x270 net/socket.c:2475
__do_sys_sendmsg net/socket.c:2484 [inline]
__se_sys_sendmsg net/socket.c:2482 [inline]
__x64_sys_sendmsg+0x42/0x50 net/socket.c:2482
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
read to 0xffff8881031c8b30 of 1 bytes by task 18751 on cpu 1:
netlink_sendmsg+0x270/0x7c0 net/netlink/af_netlink.c:1891
sock_sendmsg_nosec net/socket.c:703 [inline]
sock_sendmsg net/socket.c:723 [inline]
__sys_sendto+0x2a8/0x370 net/socket.c:2019
__do_sys_sendto net/socket.c:2031 [inline]
__se_sys_sendto net/socket.c:2027 [inline]
__x64_sys_sendto+0x74/0x90 net/socket.c:2027
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0x00 -> 0x01
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 18751 Comm: syz-executor.0 Not tainted 5.14.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Wong Vee Khee [Tue, 5 Oct 2021 03:45:21 +0000 (11:45 +0800)]
net: pcs: xpcs: fix incorrect CL37 AN sequence
According to Synopsys DesignWare Cores Ethernet PCS databook, it is
required to disable Clause 37 auto-negotiation by programming bit-12
(AN_ENABLE) to 0 if it is already enabled, before programming various
fields of VR_MII_AN_CTRL registers.
After all these programming are done, it is then required to enable
Clause 37 auto-negotiation by programming bit-12 (AN_ENABLE) to 1.
Sean Anderson [Mon, 4 Oct 2021 21:50:02 +0000 (17:50 -0400)]
net: sfp: Fix typo in state machine debug string
The string should be "tx_disable" to match the state enum.
Fixes: 4005a7cb4f55 ("net: phy: sftp: print debug message with text, not numbers") Signed-off-by: Sean Anderson <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Johan Hovold [Wed, 29 Sep 2021 09:09:37 +0000 (11:09 +0200)]
USB: cdc-acm: fix break reporting
A recent change that started reporting break events forgot to push the
event to the line discipline, which meant that a detected break would
not be reported until further characters had been receive (the port
could even have been closed and reopened in between).
Johan Hovold [Wed, 29 Sep 2021 09:09:36 +0000 (11:09 +0200)]
USB: cdc-acm: fix racy tty buffer accesses
A recent change that started reporting break events to the line
discipline caused the tty-buffer insertions to no longer be serialised
by inserting events also from the completion handler for the interrupt
endpoint.
Completion calls for distinct endpoints are not guaranteed to be
serialised. For example, in case a host-controller driver uses
bottom-half completion, the interrupt and bulk-in completion handlers
can end up running in parallel on two CPUs (high-and low-prio tasklets,
respectively) thereby breaking the tty layer's single producer
assumption.
Fix this by holding the read lock also when inserting characters from
the bulk endpoint.
Pavel Hofman [Fri, 24 Sep 2021 08:00:27 +0000 (10:00 +0200)]
usb: gadget: f_uac2: fixed EP-IN wMaxPacketSize
Async feedback patches broke enumeration on Windows 10 previously fixed
by commit 789ea77310f0 ("usb: gadget: f_uac2: always increase endpoint
max_packet_size by one audio slot").
While the existing calculation for EP OUT capture for async mode yields
size+1 frame due to uac2_opts->fb_max > 0, playback side lost the +1
feature. Therefore the +1 frame addition must be re-introduced for
playback. Win10 enumerates the device only when both EP IN and EP OUT
max packet sizes are (at least) +1 frame.
CONFIG_WWAN_CORE was with CONFIG_WWAN in commit 89212e160b81 ("net: wwan:
Fix WWAN config symbols"), but did not update all users of it. Change it
back to use CONFIG_WWAN instead.
usb: chipidea: ci_hdrc_imx: Also search for 'phys' phandle
When passing 'phys' in the devicetree to describe the USB PHY phandle
(which is the recommended way according to
Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt) the
following NULL pointer dereference is observed on i.MX7 and i.MX8MM:
[ 1.489344] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098
[ 1.498170] Mem abort info:
[ 1.500966] ESR = 0x96000044
[ 1.504030] EC = 0x25: DABT (current EL), IL = 32 bits
[ 1.509356] SET = 0, FnV = 0
[ 1.512416] EA = 0, S1PTW = 0
[ 1.515569] FSC = 0x04: level 0 translation fault
[ 1.520458] Data abort info:
[ 1.523349] ISV = 0, ISS = 0x00000044
[ 1.527196] CM = 0, WnR = 1
[ 1.530176] [0000000000000098] user address but active_mm is swapper
[ 1.536544] Internal error: Oops: 96000044 [#1] PREEMPT SMP
[ 1.542125] Modules linked in:
[ 1.545190] CPU: 3 PID: 7 Comm: kworker/u8:0 Not tainted 5.14.0-dirty #3
[ 1.551901] Hardware name: Kontron i.MX8MM N801X S (DT)
[ 1.557133] Workqueue: events_unbound deferred_probe_work_func
[ 1.562984] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--)
[ 1.568998] pc : imx7d_charger_detection+0x3f0/0x510
[ 1.573973] lr : imx7d_charger_detection+0x22c/0x510
This happens because the charger functions check for the phy presence
inside the imx_usbmisc_data structure (data->usb_phy), but the chipidea
core populates the usb_phy passed via 'phys' inside 'struct ci_hdrc'
(ci->usb_phy) instead.
This causes the NULL pointer dereference inside imx7d_charger_detection().
Fix it by also searching for 'phys' in case 'fsl,usbphy' is not found.
Xu Yang [Tue, 28 Sep 2021 11:16:39 +0000 (19:16 +0800)]
usb: typec: tcpm: handle SRC_STARTUP state if cc changes
TCPM for DRP should do the same action as SRC_ATTACHED when cc changes in
SRC_STARTUP state. Otherwise, TCPM will transition to SRC_UNATTACHED state
which is not satisfied with the Type-C spec.
Per Type-C spec:
DRP port should move to Unattached.SNK instead of Unattached.SRC if sink
removed.
Xu Yang [Sun, 26 Sep 2021 10:14:15 +0000 (18:14 +0800)]
usb: typec: tcpci: don't handle vSafe0V event if it's not enabled
USB TCPCI Spec, 4.4.3 Mask Registers:
"A masked register will still indicate in the ALERT register, but shall
not set the Alert# pin low."
Thus, the Extended Status will still indicate in ALERT register if vSafe0V
is detected by TCPC even though being masked. In current code, howerer,
this event will not be handled in detection time. Rather it will be
handled when next ALERT event coming(CC evnet, PD event, etc).
Tcpm might transition to a wrong state in this situation. Thus, the vSafe0V
event should not be handled when it's masked.
projects / linux.git / log