Setting '-e' flag tells shells to exit with error exit code immediately
after any of commands fails, and causes make(1) to regard recipes as
failed.
Before this, make will still continue to succeed even after the
installation failed, for example, for insufficient permission or
directory does not exist.
kconfig: call expr_eliminate_yn() at least once in expr_eliminate_dups()
Kconfig simplifies expressions, but redundant '&&' and '||' operators
involving constant symbols 'y' and 'n' are sometimes trimmed and
sometimes not.
[Test Code]
config DEP
def_bool y
config A
bool "A"
depends on DEP && y
config B
bool "B"
depends on DEP && y && y
[Result]
$ make helpnewconfig
[ snip ]
-----
There is no help available for this option.
Symbol: A [=n]
Type : bool
Defined at Kconfig:4
Prompt: A
Depends on: DEP [=y] && y [=y]
Location:
-> A (A [=n])
-----
-----
There is no help available for this option.
Symbol: B [=n]
Type : bool
Defined at Kconfig:8
Prompt: B
Depends on: DEP [=y]
Location:
-> B (B [=n])
-----
The dependency for A, 'DEP && y', remains as-is, while that for B,
'DEP && y && y', has been reduced to 'DEP'.
Currently, expr_eliminate_dups() calls expr_eliminate_yn() only when
trans_count != 0, in other words, only when expr_eliminate_dups1() has
trimmed at least one leaf. It fails to trim a single '&& y', etc.
To fix this inconsistent behavior, expr_eliminate_yn() should be called
at least once even if no leaf has been trimmed.
modpost: remove self-definitions of R_ARM_* macros
Commit f5983dab0ead ("modpost: define more R_ARM_* for old
distributions") added self-definitions for the R_ARM_* macros to fix
build errors on CentOS 7.
RHEL/CentOS 7 were retired at the end of June.
Remove all the R_ARM_* definitions (except for R_ARM_THM_CALL), which
should be available in recent distributions.
glibc and musl added most of R_ARM_* macros in 2013. [1] [2]
kbuild: raise the minimum GNU Make requirement to 4.0
RHEL/CentOS 7, popular distributions that install GNU Make 3.82, reached
EOM/EOL on June 30, 2024. While you may get extended support, it is a
good time to raise the minimum GNU Make version.
The new requirement, GNU Make 4.0, was released in October, 2013.
I did not touch the Makefiles under tools/ because I do not know the
requirements for building tools. I do not find any GNU Make version
checks under tools/.
kbuild: avoid build error when single DTB is turned into composite DTB
As commit afa974b77128 ("kbuild: add real-prereqs shorthand for
$(filter-out FORCE,$^)") explained, $(real-prereqs) is not just a list
of objects when linking a multi-object module. If a single-object module
is turned into a multi-object module, $^ (and therefore $(real-prereqs)
as well) contains header files recorded in the *.cmd file. Such headers
must be filtered out.
Now that a DTB can be built either from a single source or multiple
source files, the same issue can occur.
Consider the following scenario:
First, foo.dtb is implemented as a single-blob device tree.
If you rebuild foo.dtb without 'make clean', you will get this error:
Overlay 'scripts/dtc/include-prefixes/dt-bindings/gpio/gpio.h' is incomplete
$(real-prereqs) contains not only foo-base.dtb and foo-addon.dtbo but
also scripts/dtc/include-prefixes/dt-bindings/gpio/gpio.h, which is
passed to scripts/dtc/fdtoverlay.
kbuild: deb-pkg: remove support for "name <email>" form for DEBEMAIL
Commit d5940c60e057 ("kbuild: deb-pkg improve maintainer address
generation") supported the "name <email>" form for DEBEMAIL, with
behavior slightly different from devscripts.
In Kbuild, if DEBEMAIL is given in the form "name <email>", it is used
as-is, and DEBFULLNAME is ignored.
In contrast, debchange takes the name from DEBFULLNAME (or NAME) if set,
as described in 'man debchange':
If this variable has the form "name <email>", then the maintainer name
will also be taken from here if neither DEBFULLNAME nor NAME is set.
This commit removes support for the "name <email> form for DEBEMAIL,
as the current behavior is already different from debchange, and the
Debian manual suggests setting the email address and name separately in
DEBEMAIL and DEBFULLNAME. [1]
If there are any complaints about this removal, we can re-add it,
with better alignment with the debchange implementation. [2]
Masahiro Yamada [Wed, 26 Jun 2024 18:22:04 +0000 (03:22 +0900)]
kconfig: refactor error messages in sym_check_print_recursive()
Improve the error messages and clean up redundant code.
[1] remove redundant next_sym->name checks
If 'next_sym' is a choice, the first 'if' block is executed. In the
subsequent 'else if' blocks, 'next_sym" is not a choice, hence
next_sym->name is not NULL.
[2] remove redundant sym->name checks
A choice is never selected or implied by anyone because it has no name
(it is syntactically impossible). If it is, sym->name is not NULL.
[3] Show the location of choice instead of "<choice>"
"part of choice <choice>" does not convey useful information. Since a
choice has no name, it is more informative to display the file name and
line number.
Masahiro Yamada [Wed, 26 Jun 2024 18:22:03 +0000 (03:22 +0900)]
kconfig: improve error message for recursive dependency in choice
Kconfig detects recursive dependencies in a choice block, but the error
message is unclear.
[Test Code]
choice
prompt "choose"
depends on A
config A
bool "A"
config B
bool "B"
endchoice
[Result]
Kconfig:1:error: recursive dependency detected!
Kconfig:1: choice <choice> contains symbol A
Kconfig:5: symbol A is part of choice <choice>
For a resolution refer to Documentation/kbuild/kconfig-language.rst
subsection "Kconfig recursive dependency limitations"
The phrase "contains symbol A" does not accurately describe the problem.
The issue is that the choice depends on A, which is a member of itself.
The first if-block does not print a sensible message. Remove it.
This commit improves the error message to:
Kconfig:1:error: recursive dependency detected!
Kconfig:1: symbol <choice> symbol is visible depending on A
Kconfig:5: symbol A is part of choice <choice>
For a resolution refer to Documentation/kbuild/kconfig-language.rst
subsection "Kconfig recursive dependency limitations"
Masahiro Yamada [Wed, 26 Jun 2024 18:22:02 +0000 (03:22 +0900)]
kconfig: improve error message for dependency between choice members
A choice member must not depend on another member within the same choice
block.
Kconfig detects this, but the error message is not sensible.
[Test Code]
choice
prompt "choose"
config A
bool "A"
depends on B
config B
bool "B"
endchoice
[Result]
Kconfig:1:error: recursive dependency detected!
Kconfig:1: choice <choice> contains symbol A
Kconfig:4: symbol A is part of choice B
Kconfig:8: symbol B is part of choice <choice>
For a resolution refer to Documentation/kbuild/kconfig-language.rst
subsection "Kconfig recursive dependency limitations"
The phrase "part of choice B" is weird because B is not a choice block,
but a choice member.
To determine whether the current symbol is a part of a choice block,
sym_is_choice(next_sym) must be checked.
This commit improves the error message to:
Kconfig:1:error: recursive dependency detected!
Kconfig:1: choice <choice> contains symbol A
Kconfig:4: symbol A symbol is visible depending on B
Kconfig:8: symbol B is part of choice <choice>
For a resolution refer to Documentation/kbuild/kconfig-language.rst
subsection "Kconfig recursive dependency limitations"
Masahiro Yamada [Wed, 26 Jun 2024 18:22:01 +0000 (03:22 +0900)]
kconfig: fix conditional prompt behavior for choice
When a prompt is followed by "if <expr>", the symbol is configurable
when the if-conditional evaluates to true.
A typical usage is as follows:
menuconfig BLOCK
bool "Enable the block layer" if EXPERT
default y
When EXPERT=n, the prompt is hidden, but this config entry is still
active, and BLOCK is set to its default value 'y'. When EXPERT=y, the
prompt is shown, making BLOCK a user-configurable option.
This usage is common throughout the kernel tree, but it has never worked
within a choice block.
[Test Code]
config EXPERT
bool "Allow expert users to modify more options"
choice
prompt "Choose" if EXPERT
config A
bool "A"
config B
bool "B"
endchoice
[Result]
# CONFIG_EXPERT is not set
When the prompt is hidden, the choice block should produce the default
without asking for the user's preference. Hence, the output should be:
# CONFIG_EXPERT is not set
CONFIG_A=y
# CONFIG_B is not set
Removing unnecessary hacks fixes the issue.
This commit also changes the behavior of 'select' by choice members.
Masahiro Yamada [Wed, 26 Jun 2024 18:22:00 +0000 (03:22 +0900)]
treewide: change conditional prompt for choices to 'depends on'
While Documentation/kbuild/kconfig-language.rst provides a brief
explanation, there are recurring confusions regarding the usage of a
prompt followed by 'if <expr>'. This conditional controls _only_ the
prompt.
A typical usage is as follows:
menuconfig BLOCK
bool "Enable the block layer" if EXPERT
default y
When EXPERT=n, the prompt is hidden, but this config entry is still
active, and BLOCK is set to its default value 'y'. This is reasonable
because you are likely want to enable the block device support. When
EXPERT=y, the prompt is shown, allowing you to toggle BLOCK.
Please note that it is different from 'depends on EXPERT', which would
enable and disable the entire config entry.
However, this conditional prompt has never worked in a choice block.
The following two work in the same way: when EXPERT is disabled, the
choice block is entirely disabled.
[Test Code 1]
choice
prompt "choose" if EXPERT
config A
bool "A"
config B
bool "B"
endchoice
[Test Code 2]
choice
prompt "choose"
depends on EXPERT
config A
bool "A"
config B
bool "B"
endchoice
I believe the first case should hide only the prompt, producing the
default:
CONFIG_A=y
# CONFIG_B is not set
The next commit will change (fix) the behavior of the conditional prompt
in choice blocks.
I see several choice blocks wrongly using a conditional prompt, where
'depends on' makes more sense.
To preserve the current behavior, this commit converts such misuses.
I did not touch the following entry in arch/x86/Kconfig:
choice
prompt "Memory split" if EXPERT
default VMSPLIT_3G
This is truly the correct use of the conditional prompt; when EXPERT=n,
this choice block should silently select the reasonable VMSPLIT_3G,
although the resulting PAGE_OFFSET will not be affected anyway.
Presumably, the one in fs/jffs2/Kconfig is also correct, but I converted
it to 'depends on' to avoid any potential behavioral change.
Masahiro Yamada [Tue, 18 Jun 2024 10:35:21 +0000 (19:35 +0900)]
kconfig: refactor choice value calculation
Handling choices has always been in a PITA in Kconfig.
For example, fixes and reverts were repeated for randconfig with
KCONFIG_ALLCONFIG:
- 422c809f03f0 ("kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG")
- 23a5dfdad22a ("Revert "kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG"")
- 8357b48549e1 ("kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG")
- 490f16171119 ("Revert "kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG"")
As these commits pointed out, randconfig does not randomize choices when
KCONFIG_ALLCONFIG is used. This issue still remains.
[Test Case]
choice
prompt "choose"
config A
bool "A"
config B
bool "B"
endchoice
$ echo > all.config
$ make KCONFIG_ALLCONFIG=1 randconfig
The output is always as follows:
CONFIG_A=y
# CONFIG_B is not set
Not only randconfig, but other all*config variants are also broken with
KCONFIG_ALLCONFIG.
With the same Kconfig,
$ echo '# CONFIG_A is not set' > all.config
$ make KCONFIG_ALLCONFIG=1 allyesconfig
You will get this:
CONFIG_A=y
# CONFIG_B is not set
This is incorrect because it does not respect all.config.
The correct output should be:
# CONFIG_A is not set
CONFIG_B=y
To handle user inputs more accurately, this commit refactors the code
based on the following principles:
- When a user value is given, Kconfig must set it immediately.
Do not defer it by setting SYMBOL_NEED_SET_CHOICE_VALUES.
- The SYMBOL_DEF_USER flag must not be cleared, unless a new config
file is loaded. Kconfig must not forget user inputs.
In addition, user values for choices must be managed with priority.
If user inputs conflict within a choice block, the newest value wins.
The values given by randconfig have lower priority than explicit user
inputs.
This commit implements it by using a linked list. Every time a choice
block gets a new input, it is moved to the top of the list.
Let me explain how it works.
Let's say, we have a choice block that consists of five symbols:
A, B, C, D, and E.
Initially, the linked list looks like this:
A(=?) --> B(=?) --> C(=?) --> D(=?) --> E(=?)
Suppose randconfig is executed with the following KCONFIG_ALLCONFIG:
CONFIG_C=y
# CONFIG_A is not set
CONFIG_D=y
First, CONFIG_C=y is read. C is set to 'y' and moved to the top.
C(=y) --> A(=?) --> B(=?) --> D(=?) --> E(=?)
Next, '# CONFIG_A is not set' is read. A is set to 'n' and moved to
the top.
A(=n) --> C(=y) --> B(=?) --> D(=?) --> E(=?)
Then, 'CONFIG_D=y' is read. D is set to 'y' and moved to the top.
D(=y) --> A(=n) --> C(=y) --> B(=?) --> E(=?)
Lastly, randconfig shuffles the order of the remaining symbols,
resulting in:
When calculating the output, the linked list is traversed and the first
visible symbol with 'y' is taken. In this case, it is D if visible.
If D is hidden by 'depends on', the next node, A, is examined. Since
it is already specified as 'n', it is skipped. Next, C is checked, and
selected if it is visible.
If C is also invisible, either B or E is chosen as a result of the
randomization.
If B and E are also invisible, the linked list is traversed in the
reverse order, and the least prioritized 'n' symbol is chosen. It is
A in this case.
Now, Kconfig remembers all user values. This is a big difference from
the previous implementation, where Kconfig would forget CONFIG_C=y when
CONFIG_D=y appeared in the same input file.
The new appaorch respects user-specified values as much as possible.
Chen-Yu Tsai [Thu, 13 Jun 2024 09:34:32 +0000 (17:34 +0800)]
scripts/make_fit: Support decomposing DTBs
The kernel tree builds some "composite" DTBs, where the final DTB is the
result of applying one or more DTB overlays on top of a base DTB with
fdtoverlay.
The FIT image specification already supports configurations having one
base DTB and overlays applied on top. It is then up to the bootloader to
apply said overlays and either use or pass on the final result. This
allows the FIT image builder to reuse the same FDT images for multiple
configurations, if such cases exist.
The decomposition function depends on the kernel build system, reading
back the .cmd files for the to-be-packaged DTB files to check for the
fdtoverlay command being called. This will not work outside the kernel
tree. The function is off by default to keep compatibility with possible
existing users.
To facilitate the decomposition and keep the code clean, the model and
compatitble string extraction have been moved out of the output_dtb
function. The FDT image description is replaced with the base file name
of the included image.
Uwe Kleine-König [Tue, 11 Jun 2024 20:59:00 +0000 (22:59 +0200)]
modpost: Enable section warning from *driver to .exit.text
There used to be several offenders, but now that for all of them patches
were sent and most of them were applied, enable the warning also for
builds without W=1.
Masahiro Yamada [Tue, 11 Jun 2024 18:24:47 +0000 (03:24 +0900)]
kbuild: move init/build-version to scripts/
At first, I thought this script would be needed only in init/Makefile.
However, commit 5db8face97f8 ("kbuild: Restore .version auto-increment
behaviour for Debian packages") and commit 1789fc912541 ("kbuild:
rpm-pkg: invoke the kernel build from rpmbuild for binrpm-pkg")
revealed that it was actually needed for scripts/package/mk* as well.
Masahiro Yamada [Tue, 11 Jun 2024 17:55:12 +0000 (02:55 +0900)]
kconfig: introduce choice_set_value() helper
Currently, sym_set_tristate_value() is used to set 'y' to a choice
member, which is confusing because it not only sets 'y' to the given
symbol but also tweaks flags of other symbols as a side effect.
Add a dedicated function for setting the value of the given choice.
Masahiro Yamada [Tue, 11 Jun 2024 17:55:10 +0000 (02:55 +0900)]
kconfig: remove unneeded code in expr_compare_type()
The condition (t2 == 0) never becomes true because the zero value
(i.e., E_NONE) is only used as a dummy type for prevtoken. It can
be passed to t1, but not to t2.
The caller of this function only checks expr_compare_type() > 0.
Therefore, the distinction between 0 and -1 is unnecessary.
Masahiro Yamada [Mon, 10 Jun 2024 11:25:17 +0000 (20:25 +0900)]
kbuild: remove PROVIDE() for kallsyms symbols
This reimplements commit 951bcae6c5a0 ("kallsyms: Avoid weak references
for kallsyms symbols") because I am not a big fan of PROVIDE().
As an alternative solution, this commit prepends one more kallsyms step.
KSYMS .tmp_vmlinux.kallsyms0.S # added
AS .tmp_vmlinux.kallsyms0.o # added
LD .tmp_vmlinux.btf
BTF .btf.vmlinux.bin.o
LD .tmp_vmlinux.kallsyms1
NM .tmp_vmlinux.kallsyms1.syms
KSYMS .tmp_vmlinux.kallsyms1.S
AS .tmp_vmlinux.kallsyms1.o
LD .tmp_vmlinux.kallsyms2
NM .tmp_vmlinux.kallsyms2.syms
KSYMS .tmp_vmlinux.kallsyms2.S
AS .tmp_vmlinux.kallsyms2.o
LD vmlinux
Step 0 takes /dev/null as input, and generates .tmp_vmlinux.kallsyms0.o,
which has a valid kallsyms format with the empty symbol list, and can be
linked to vmlinux. Since it is really small, the added compile-time cost
is negligible.
Masahiro Yamada [Mon, 10 Jun 2024 11:25:16 +0000 (20:25 +0900)]
kbuild: refactor variables in scripts/link-vmlinux.sh
Clean up the variables in scripts/link-vmlinux.sh
- Specify the extra objects directly in vmlinux_link()
- Move the AS rule to kallsyms()
- Set kallsymso and btf_vmlinux_bin_o where they are generated
- Remove unneeded variable, kallsymso_prev
- Introduce the btf_data variable
- Introduce the strip_debug flag instead of checking the output name
Masahiro Yamada [Sun, 2 Jun 2024 12:54:14 +0000 (21:54 +0900)]
kconfig: remove tristate choice support
I previously submitted a fix for a bug in the choice feature [1], where
I mentioned, "Another (much cleaner) approach would be to remove the
tristate choice support entirely".
There are more issues in the tristate choice feature. For example, you
can observe a couple of bugs in the following test code.
[Test Code]
config MODULES
def_bool y
modules
choice
prompt "tristate choice"
default A
config A
tristate "A"
config B
tristate "B"
endchoice
Bug 1: the 'default' property is not correctly processed
'make alldefconfig' produces:
CONFIG_MODULES=y
# CONFIG_A is not set
# CONFIG_B is not set
However, the correct output should be:
CONFIG_MODULES=y
CONFIG_A=y
# CONFIG_B is not set
The unit test file, scripts/kconfig/tests/choice/alldef_expected_config,
is wrong as well.
Bug 2: choice members never get 'y' with randconfig
For the test code above, the following combinations are possible:
A B
(1) y n
(2) n y
(3) m m
(4) m n
(5) n m
(6) n n
'make randconfig' never produces (1) or (2).
These bugs are fixable, but a more critical problem is the lack of a
sensible syntax to specify the default for the tristate choice.
The default for the choice must be one of the choice members, which
cannot specify any of the patterns (3) through (6) above.
In addition, I have never seen it being used in a useful way.
The following commits removed unnecessary use of tristate choices:
- df8df5e4bc37 ("usb: get rid of 'choice' for legacy gadget drivers")
- bfb57ef0544a ("rapidio: remove choice for enumeration")
This commit removes the tristate choice support entirely, which allows
me to delete a lot of code, making further refactoring easier.
Note:
This includes the revert of commit fa64e5f6a35e ("kconfig/symbol.c:
handle choice_values that depend on 'm' symbols"). It was suspicious
because it did not address the root cause but introduced inconsistency
in visibility between choice members and other symbols.
Masahiro Yamada [Sat, 1 Jun 2024 18:20:43 +0000 (03:20 +0900)]
kconfig: pass new conf_changed value to the callback
Commit ee06a3ef7e3c ("kconfig: Update config changed flag before calling
callback") pointed out that conf_updated flag must be updated _before_
calling the callback, which needs to know the new value.
Given that, it makes sense to directly pass the new value to the
callback.
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A set of clk fixes for the Qualcomm, Mediatek, and Allwinner drivers:
- Fix the Qualcomm Stromer Plus PLL set_rate() clk_op to explicitly
set the alpha enable bit and not set bits that don't exist
- Mark Qualcomm IPQ9574 crypto clks as voted to avoid stuck clk
warnings
- Fix the parent of some PLLs on Qualcomm sm6530 so their rate is
correct
- Fix the min/max rate clamping logic in the Allwinner driver that
got broken in v6.9
- Limit runtime PM enabling in the Mediatek driver to only
mt8183-mfgcfg so that system wide resume doesn't break on other
Mediatek SoCs"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: mediatek: mt8183: Only enable runtime PM on mt8183-mfgcfg
clk: sunxi-ng: common: Don't call hw_to_ccu_common on hw without common
clk: qcom: gcc-ipq9574: Add BRANCH_HALT_VOTED flag
clk: qcom: apss-ipq-pll: remove 'config_ctl_hi_val' from Stromer pll configs
clk: qcom: clk-alpha-pll: set ALPHA_EN bit for Stromer Plus PLLs
clk: qcom: gcc-sm6350: Fix gpll6* & gpll7 parents
Merge tag 'powerpc-6.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix unnecessary copy to 0 when kernel is booted at address 0
- Fix usercopy crash when dumping dtl via debugfs
- Avoid possible crash when PCI hotplug races with error handling
- Fix kexec crash caused by scv being disabled before other CPUs
call-in
- Fix powerpc selftests build with USERCFLAGS set
Thanks to Anjali K, Ganesh Goudar, Gautam Menghani, Jinglin Wen,
Nicholas Piggin, Sourabh Jain, Srikar Dronamraju, and Vishal Chourasia.
* tag 'powerpc-6.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix build with USERCFLAGS set
powerpc/pseries: Fix scv instruction crash with kexec
powerpc/eeh: avoid possible crash when edev->pdev changes
powerpc/pseries: Whitelist dtl slub object for copying to userspace
powerpc/64s: Fix unnecessary copy to 0 when kernel is booted at address 0
Merge tag 'i2c-for-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"An i2c driver fix"
* tag 'i2c-for-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr
Currently building the powerpc selftests with USERCFLAGS set to anything
causes the build to break:
$ make -C tools/testing/selftests/powerpc V=1 USERCFLAGS=-Wno-error
...
gcc -Wno-error cache_shape.c ...
cache_shape.c:18:10: fatal error: utils.h: No such file or directory
18 | #include "utils.h"
| ^~~~~~~~~
compilation terminated.
This happens because the USERCFLAGS are added to CFLAGS in lib.mk, which
causes the check of CFLAGS in powerpc/flags.mk to skip setting CFLAGS at
all, resulting in none of the usual CFLAGS being passed. That can
be seen in the output above, the only flag passed to the compiler is
-Wno-error.
Fix it by dropping the conditional setting of CFLAGS in flags.mk.
Instead always set CFLAGS, but also append USERCFLAGS if they are set.
Note that appending to CFLAGS (with +=) wouldn't work, because flags.mk
is included by multiple Makefiles (to support partial builds), causing
CFLAGS to be appended to multiple times. Additionally that would place
the USERCFLAGS prior to the standard CFLAGS, meaning the USERCFLAGS
couldn't override the standard flags. Being able to override the
standard flags is desirable, for example for adding -Wno-error.
With the fix in place, the CFLAGS are set correctly, including the
USERCFLAGS:
Merge tag 'integrity-v6.10-fix' of ssh://ra.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity fix from Mimi Zohar:
"A single bug fix to properly remove all of the securityfs IMA
measurement lists"
* tag 'integrity-v6.10-fix' of ssh://ra.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: fix wrong zero-assignment during securityfs dentry remove
Merge tag 'pci-v6.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci update from Bjorn Helgaas:
- Update MAINTAINERS and CREDITS to credit Gustavo Pimentel with the
Synopsys DesignWare eDMA driver and reflect that he is no longer at
Synopsys and isn't in a position to maintain the DesignWare xData
traffic generator (Bjorn Helgaas)
* tag 'pci-v6.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
CREDITS: Add Synopsys DesignWare eDMA driver for Gustavo Pimentel
MAINTAINERS: Orphan Synopsys DesignWare xData traffic generator
Merge tag 'riscv-for-linus-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for the CMODX example in the recently added icache flushing
prctl()
- A fix to the perf driver to avoid corrupting event data on counter
overflows when external overflow handlers are in use
- A fix to clear all hardware performance monitor events on boot, to
avoid dangling events firmware or previously booted kernels from
triggering spuriously
- A fix to the perf event probing logic to avoid erroneously reporting
the presence of unimplemented counters. This also prevents some
implemented counters from being reported
- A build fix for the vector sigreturn selftest on clang
- A fix to ftrace, which now requires the previously optional index
argument to ftrace_graph_ret_addr()
- A fix to avoid deadlocking if kexec crash handling triggers in an
interrupt context
* tag 'riscv-for-linus-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: kexec: Avoid deadlock in kexec crash path
riscv: stacktrace: fix usage of ftrace_graph_ret_addr()
riscv: selftests: Fix vsetivli args for clang
perf: RISC-V: Check standard event availability
drivers/perf: riscv: Reset the counter to hpmevent mapping while starting cpus
drivers/perf: riscv: Do not update the event data if uptodate
documentation: Fix riscv cmodx example
- xe: migration error handling + typoed register name in gt setup
- i915: usb-c fix to shut up warnings on MTL+
- panthor: fix sync-only jobs + ioctl validation fix to not EINVAL
wrongly
- panel quirks
- nouveau: NULL deref in get_modes
drm core:
- fbdev big endian fix for the dma memory backed variant
drivers/firmware:
- fix sysfb refcounting"
* tag 'drm-fixes-2024-07-05' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/mcr: Avoid clobbering DSS steering
drm/xe: fix error handling in xe_migrate_update_pgtables
drm/ttm: Always take the bo delayed cleanup path for imported bos
drm/fbdev-generic: Fix framebuffer on big endian devices
drm/panthor: Fix sync-only jobs
drm/panthor: Don't check the array stride on empty uobj arrays
drm/amdgpu/atomfirmware: silence UBSAN warning
drm/radeon: check bo_va->bo is non-NULL before using it
drm/amd/display: Fix array-index-out-of-bounds in dml2/FCLKChangeSupport
drm/amd/display: Update efficiency bandwidth for dcn351
drm/amd/display: Fix refresh rate range for some panel
drm/amd/display: Account for cursor prefetch BW in DML1 mode support
drm/amd/display: Add refresh rate range check
drm/amd/display: Reset freesync config before update new state
drm: panel-orientation-quirks: Add labels for both Valve Steam Deck revisions
drm: panel-orientation-quirks: Add quirk for Valve Galileo
drm/i915/display: For MTL+ platforms skip mg dp programming
drm/nouveau: fix null pointer dereference in nouveau_connector_get_modes
firmware: sysfb: Fix reference count of sysfb parent device
Merge tag 'gpio-fixes-for-v6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Two OF lookup quirks and one fix for an issue in the generic gpio-mmio
driver:
- add two OF lookup quirks for TSC2005 and MIPS Lantiq
- don't try to figure out bgpio_bits from the 'ngpios' property in
gpio-mmio"
* tag 'gpio-fixes-for-v6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: of: add polarity quirk for TSC2005
gpio: mmio: do not calculate bgpio_bits via "ngpios"
gpiolib: of: fix lookup quirk for MIPS Lantiq
Merge tag 'tpmdd-next-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull TPM fixes from Jarkko Sakkinen:
"This contains the fixes for !chip->auth condition, preventing the
breakage of:
- tpm_ftpm_tee.c
- tpm_i2c_nuvoton.c
- tpm_ibmvtpm.c
- tpm_tis_i2c_cr50.c
- tpm_vtpm_proxy.c
All drivers will continue to work as they did in 6.9, except a single
warning (dev_warn() not WARN()) is printed to klog only to inform that
authenticated sessions are not enabled"
* tag 'tpmdd-next-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: Address !chip->auth in tpm_buf_append_hmac_session*()
tpm: Address !chip->auth in tpm_buf_append_name()
tpm: Address !chip->auth in tpm2_*_auth_session()
Wolfram Sang [Fri, 5 Jul 2024 14:08:55 +0000 (16:08 +0200)]
Merge tag 'i2c-host-fixes-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
This tag includes a nice fix in the PNX driver that has been
pending for a long time. Piotr has replaced a potential lock in
the interrupt context with a more efficient and straightforward
handling of the timeout signaling.
DTS for Nokia N900 incorrectly specifies "active high" polarity for
the reset line, while the chip documentation actually specifies it as
"active low". In the past the driver fudged gpiod API and inverted
the logic internally, but it was changed in d0d89493bff8.
Jarkko Sakkinen [Wed, 3 Jul 2024 15:47:46 +0000 (18:47 +0300)]
tpm: Address !chip->auth in tpm_buf_append_hmac_session*()
Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can
cause a null derefence in tpm_buf_hmac_session*(). Thus, address
!chip->auth in tpm_buf_hmac_session*() and remove the fallback
implementation for !TCG_TPM2_HMAC.
Jarkko Sakkinen [Wed, 3 Jul 2024 15:33:14 +0000 (18:33 +0300)]
tpm: Address !chip->auth in tpm_buf_append_name()
Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can
cause a null derefence in tpm_buf_append_name(). Thus, address
!chip->auth in tpm_buf_append_name() and remove the fallback
implementation for !TCG_TPM2_HMAC.
Jarkko Sakkinen [Wed, 3 Jul 2024 16:39:27 +0000 (19:39 +0300)]
tpm: Address !chip->auth in tpm2_*_auth_session()
Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can cause
a null derefence in tpm2_*_auth_session(). Thus, address !chip->auth in
tpm2_*_auth_session().
Merge tag 'for-6.10-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix folio refcounting when releasing them (encoded write, dummy
extent buffer)
- fix out of bounds read when checking qgroup inherit data
- fix how configurable chunk size is handled in zoned mode
- in the ref-verify tool, fix uninitialized return value when checking
extent owner ref and simple quota are not enabled
* tag 'for-6.10-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix folio refcount in __alloc_dummy_extent_buffer()
btrfs: fix folio refcount in btrfs_do_encoded_write()
btrfs: fix uninitialized return value in the ref-verify tool
btrfs: always do the basic checks for btrfs_qgroup_inherit structure
btrfs: zoned: fix calc_available_free_space() for zoned mode
Merge tag 'net-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, wireless and netfilter.
There's one fix for power management with Intel's e1000e here,
Thorsten tells us there's another problem that started in v6.9. We're
trying to wrap that up but I don't think it's blocking.
Current release - new code bugs:
- wifi: mac80211: disable softirqs for queued frame handling
- af_unix: fix uninit-value in __unix_walk_scc(), with the new
garbage collection algo
Previous releases - regressions:
- Bluetooth:
- qca: fix BT enable failure for QCA6390 after warm reboot
- add quirk to ignore reserved PHY bits in LE Extended Adv Report,
abused by some Broadcom controllers found on Apple machines
- wifi: wilc1000: fix ies_len type in connect path
Previous releases - always broken:
- tcp: fix DSACK undo in fast recovery to call tcp_try_to_open(),
avoid premature timeouts
- net: make sure skb_datagram_iter maps fragments page by page, in
case we somehow get compound highmem mixed in
- eth: bnx2x: fix multiple UBSAN array-index-out-of-bounds when more
queues are used
Misc:
- MAINTAINERS: Remembering Larry Finger"
* tag 'net-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
bnxt_en: Fix the resource check condition for RSS contexts
mlxsw: core_linecards: Fix double memory deallocation in case of invalid INI file
inet_diag: Initialize pad field in struct inet_diag_req_v2
tcp: Don't flag tcp_sk(sk)->rx_opt.saw_unknown for TCP AO.
selftests: make order checking verbose in msg_zerocopy selftest
selftests: fix OOM in msg_zerocopy selftest
ice: use proper macro for testing bit
ice: Reject pin requests with unsupported flags
ice: Don't process extts if PTP is disabled
ice: Fix improper extts handling
selftest: af_unix: Add test case for backtrack after finalising SCC.
af_unix: Fix uninit-value in __unix_walk_scc()
bonding: Fix out-of-bounds read in bond_option_arp_ip_targets_set()
net: rswitch: Avoid use-after-free in rswitch_poll()
netfilter: nf_tables: unconditionally flush pending work before notifier
wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference
wifi: iwlwifi: mvm: avoid link lookup in statistics
wifi: iwlwifi: mvm: don't wake up rx_sync_waitq upon RFKILL
wifi: iwlwifi: properly set WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK
wifi: wilc1000: fix ies_len type in connect path
...
Merge tag 's390-6.10-8' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Fix and add physical to virtual address translations in dasd and
virtio_ccw drivers. For virtio_ccw this is just a minimal fix.
More code cleanup will follow.
- Small defconfig updates
* tag 's390-6.10-8' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/dasd: Fix invalid dereferencing of indirect CCW data pointer
s390/vfio_ccw: Fix target addresses of TIC CCWs
s390: Update defconfigs
Merge tag 'mm-hotfixes-stable-2024-07-03-22-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from, Andrew Morton:
"6 hotfies, all cc:stable. Some fixes for longstanding nilfs2 issues
and three unrelated MM fixes"
* tag 'mm-hotfixes-stable-2024-07-03-22-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
nilfs2: fix incorrect inode allocation from reserved inodes
nilfs2: add missing check for inode numbers on directory entries
nilfs2: fix inode number range checks
mm: avoid overflows in dirty throttling logic
Revert "mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again"
mm: optimize the redundant loop of mm_update_owner_next()
bnxt_en: Fix the resource check condition for RSS contexts
While creating a new RSS context, bnxt_rfs_capable() currently
makes a strict check to see if the required VNICs are already
available. If the current VNICs are not what is required,
either too many or not enough, it will call the firmware to
reserve the exact number required.
There is a bug in the firmware when the driver tries to
relinquish some reserved VNICs and RSS contexts. It will
cause the default VNIC to lose its RSS configuration and
cause receive packets to be placed incorrectly.
Workaround this problem by skipping the resource reduction.
The driver will not reduce the VNIC and RSS context reservations
when a context is deleted. The resources will be available for
use when new contexts are created later.
Potentially, this workaround can cause us to run out of VNIC
and RSS contexts if there are a lot of VF functions creating
and deleting RSS contexts. In the future, we will conditionally
disable this workaround when the firmware fix is available.
mlxsw: core_linecards: Fix double memory deallocation in case of invalid INI file
In case of invalid INI file mlxsw_linecard_types_init() deallocates memory
but doesn't reset pointer to NULL and returns 0. In case of any error
occurred after mlxsw_linecard_types_init() call, mlxsw_linecards_init()
calls mlxsw_linecard_types_fini() which performs memory deallocation again.
Add pointer reset to NULL.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Jakub Kicinski [Thu, 4 Jul 2024 14:31:54 +0000 (07:31 -0700)]
Merge tag 'wireless-2024-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.10
Hopefully the last fixes for v6.10. Fix a regression in wilc1000
where bitrate Information Elements longer than 255 bytes were broken.
Few fixes also to mac80211 and iwlwifi.
* tag 'wireless-2024-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference
wifi: iwlwifi: mvm: avoid link lookup in statistics
wifi: iwlwifi: mvm: don't wake up rx_sync_waitq upon RFKILL
wifi: iwlwifi: properly set WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK
wifi: wilc1000: fix ies_len type in connect path
wifi: mac80211: fix BSS_CHANGED_UNSOL_BCAST_PROBE_RESP
====================
Paolo Abeni [Thu, 4 Jul 2024 13:31:26 +0000 (15:31 +0200)]
Merge tag 'nf-24-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains a oneliner patch to inconditionally flush
workqueue containing stale objects to be released, syzbot managed to
trigger UaF. Patch from Florian Westphal.
netfilter pull request 24-07-04
* tag 'nf-24-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: unconditionally flush pending work before notifier
====================
Shigeru Yoshida [Wed, 3 Jul 2024 09:16:49 +0000 (18:16 +0900)]
inet_diag: Initialize pad field in struct inet_diag_req_v2
KMSAN reported uninit-value access in raw_lookup() [1]. Diag for raw
sockets uses the pad field in struct inet_diag_req_v2 for the
underlying protocol. This field corresponds to the sdiag_raw_protocol
field in struct inet_diag_req_raw.
inet_diag_get_exact_compat() converts inet_diag_req to
inet_diag_req_v2, but leaves the pad field uninitialized. So the issue
occurs when raw_lookup() accesses the sdiag_raw_protocol field.
Fix this by initializing the pad field in
inet_diag_get_exact_compat(). Also, do the same fix in
inet_diag_dump_compat() to avoid the similar issue in the future.
tcp: Don't flag tcp_sk(sk)->rx_opt.saw_unknown for TCP AO.
When we process segments with TCP AO, we don't check it in
tcp_parse_options(). Thus, opt_rx->saw_unknown is set to 1,
which unconditionally triggers the BPF TCP option parser.
Matt Roper [Wed, 26 Jun 2024 21:05:37 +0000 (14:05 -0700)]
drm/xe/mcr: Avoid clobbering DSS steering
A couple copy/paste mistakes in the code that selects steering targets
for OADDRM and INSTANCE0 unintentionally clobbered the steering target
for DSS ranges in some cases.
The OADDRM/INSTANCE0 values were also not assigned as intended, although
that mistake wound up being harmless since the desired values for those
specific ranges were '0' which the kzalloc of the GT structure should
have already taken care of implicitly.
Thomas Hellström [Fri, 28 Jun 2024 15:38:48 +0000 (17:38 +0200)]
drm/ttm: Always take the bo delayed cleanup path for imported bos
Bos can be put with multiple unrelated dma-resv locks held. But
imported bos attempt to grab the bo dma-resv during dma-buf detach
that typically happens during cleanup. That leads to lockde splats
similar to the below and a potential ABBA deadlock.
Fix this by always taking the delayed workqueue cleanup path for
imported bos.
Requesting stable fixes from when the Xe driver was introduced,
since its usage of drm_exec and wide vm dma_resvs appear to be
the first reliable trigger of this.
[22982.116427] ============================================
[22982.116428] WARNING: possible recursive locking detected
[22982.116429] 6.10.0-rc2+ #10 Tainted: G U W
[22982.116430] --------------------------------------------
[22982.116430] glxgears:sh0/5785 is trying to acquire lock:
[22982.116431] ffff8c2bafa539a8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: dma_buf_detach+0x3b/0xf0
[22982.116438]
but task is already holding lock:
[22982.116438] ffff8c2d9aba6da8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_exec_lock_obj+0x49/0x2b0 [drm_exec]
[22982.116442]
other info that might help us debug this:
[22982.116442] Possible unsafe locking scenario:
====================
fix OOM and order check in msg_zerocopy selftest
In selftests/net/msg_zerocopy.c, it has a while loop keeps calling sendmsg
on a socket with MSG_ZEROCOPY flag, and it will recv the notifications
until the socket is not writable. Typically, it will start the receiving
process after around 30+ sendmsgs. However, as the introduction of commit dfa2f0483360 ("tcp: get rid of sysctl_tcp_adv_win_scale"), the sender is
always writable and does not get any chance to run recv notifications.
The selftest always exits with OUT_OF_MEMORY because the memory used by
opt_skb exceeds the net.core.optmem_max. Meanwhile, it could be set to a
different value to trigger OOM on older kernels too.
Thus, we introduce "cfg_notification_limit" to force sender to receive
notifications after some number of sendmsgs.
And, we find that when lock debugging is on, notifications may not come in
order. Thus, we have order checking outputs managed by cfg_verbose, to
avoid too many outputs in this case.
====================
selftests: make order checking verbose in msg_zerocopy selftest
We find that when lock debugging is on, notifications may not come in
order. Thus, we have order checking outputs managed by cfg_verbose, to
avoid too many outputs in this case.
In selftests/net/msg_zerocopy.c, it has a while loop keeps calling sendmsg
on a socket with MSG_ZEROCOPY flag, and it will recv the notifications
until the socket is not writable. Typically, it will start the receiving
process after around 30+ sendmsgs. However, as the introduction of commit dfa2f0483360 ("tcp: get rid of sysctl_tcp_adv_win_scale"), the sender is
always writable and does not get any chance to run recv notifications.
The selftest always exits with OUT_OF_MEMORY because the memory used by
opt_skb exceeds the net.core.optmem_max. Meanwhile, it could be set to a
different value to trigger OOM on older kernels too.
Thus, we introduce "cfg_notification_limit" to force sender to receive
notifications after some number of sendmsgs.
====================
Intel Wired LAN Driver Updates 2024-06-25 (ice)
This series contains updates to ice driver only.
Milena adds disabling of extts events when PTP is disabled.
Jake prevents possible NULL pointer by checking that timestamps are
ready before processing extts events and adds checks for unsupported
PTP pin configuration.
Petr Oros replaces _test_bit() with the correct test_bit() macro.
v1: https://lore.kernel.org/netdev/20240625170248[email protected]/
====================
Petr Oros [Tue, 2 Jul 2024 17:14:57 +0000 (10:14 -0700)]
ice: use proper macro for testing bit
Do not use _test_bit() macro for testing bit. The proper macro for this
is one without underline.
_test_bit() is what test_bit() was prior to const-optimization. It
directly calls arch_test_bit(), i.e. the arch-specific implementation
(or the generic one). It's strictly _internal_ and shouldn't be used
anywhere outside the actual test_bit() macro.
test_bit() is a wrapper which checks whether the bitmap and the bit
number are compile-time constants and if so, it calls the optimized
function which evaluates this call to a compile-time constant as well.
If either of them is not a compile-time constant, it just calls _test_bit().
test_bit() is the actual function to use anywhere in the kernel.
The sensors is not a compile-time constant, thus most probably there
are no object code changes before and after the patch.
But anyway, we shouldn't call internal wrappers instead of
the actual API.
Jacob Keller [Tue, 2 Jul 2024 17:14:56 +0000 (10:14 -0700)]
ice: Reject pin requests with unsupported flags
The driver receives requests for configuring pins via the .enable
callback of the PTP clock object. These requests come into the driver
with flags which modify the requested behavior from userspace. Current
implementation in ice does not reject flags that it doesn't support.
This causes the driver to incorrectly apply requests with such flags as
PTP_PEROUT_DUTY_CYCLE, or any future flags added by the kernel which it
is not yet aware of.
Fix this by properly validating flags in both ice_ptp_cfg_perout and
ice_ptp_cfg_extts. Ensure that we check by bit-wise negating supported
flags rather than just checking and rejecting known un-supported flags.
This is preferable, as it ensures better compatibility with future
kernels.
Jacob Keller [Tue, 2 Jul 2024 17:14:55 +0000 (10:14 -0700)]
ice: Don't process extts if PTP is disabled
The ice_ptp_extts_event() function can race with ice_ptp_release() and
result in a NULL pointer dereference which leads to a kernel panic.
Panic occurs because the ice_ptp_extts_event() function calls
ptp_clock_event() with a NULL pointer. The ice driver has already
released the PTP clock by the time the interrupt for the next external
timestamp event occurs.
To fix this, modify the ice_ptp_extts_event() function to check the
PTP state and bail early if PTP is not ready.
Extts events are disabled and enabled by the application ts2phc.
However, in case where the driver is removed when the application is
running, a specific extts event remains enabled and can cause a kernel
crash.
As a side effect, when the driver is reloaded and application is started
again, remaining extts event for the channel from a previous run will
keep firing and the message "extts on unexpected channel" might be
printed to the user.
To avoid that, extts events shall be disabled when PTP is released.
Shigeru Yoshida [Tue, 2 Jul 2024 16:04:27 +0000 (01:04 +0900)]
af_unix: Fix uninit-value in __unix_walk_scc()
KMSAN reported uninit-value access in __unix_walk_scc() [1].
In the list_for_each_entry_reverse() loop, when the vertex's index
equals it's scc_index, the loop uses the variable vertex as a
temporary variable that points to a vertex in scc. And when the loop
is finished, the variable vertex points to the list head, in this case
scc, which is a local variable on the stack (more precisely, it's not
even scc and might underflow the call stack of __unix_walk_scc():
container_of(&scc, struct unix_vertex, scc_entry)).
However, the variable vertex is used under the label prev_vertex. So
if the edge_stack is not empty and the function jumps to the
prev_vertex label, the function will access invalid data on the
stack. This causes the uninit-value access issue.
Fix this by introducing a new temporary variable for the loop.
projects / linux.git / log