ALSA: usb-audio: Register card at the last interface
The USB-audio driver matches per interface, and as default, it
registers the card instance at the very first instance. This can be a
problem for the devices that have multiple interfaces to be probed, as
the udev rule isn't applied properly for the later appearing
interfaces. Although we introduced the delayed_register option and
the quirks for covering those shortcomings, it's nothing but a
workaround for specific devices.
This patch is an another attempt to fix the problem in a more generic
way. Now the driver checks the whole USB device descriptor at the
very first time when an interface is attached to a sound card. It
looks at each matching interface in the descriptor and remembers the
last matching one. The snd_card_register() is invoked only when this
last interface is probed.
After this change, the quirks for the delayed registration become
superfluous, hence they are removed along with the patch. OTOH, the
delayed_register option is still kept, as it might be useful for some
corner cases (e.g. a special driver overtakes the interface probe from
the standard driver, and the last interface probe may miss).
ALSA: hda: Once again fix regression of page allocations with IOMMU
The last fix for trying to recover the regression on AMD platforms,
unfortunately, leaded to yet another regression: it turned out that
IOMMUs don't like the usage of raw page allocations.
This is yet another attempt for addressing the log saga; at this time,
we re-use the existing buffer allocation mechanism with SG-pages
although we require only single pages. The SG buffer allocation
itself was confirmed to work for stream buffers, so it's relatively
easy to adapt for other places.
The only problem is: although the HD-audio code is accessing the
address directly via dmab->address field, SG-pages don't set up it.
For the ease of adaption, we now set up the dmab->addr field from the
address of the first page as default, so that it can run with the
HD-audio driver code as-is without the excessive call of
snd_sgbuf_get_addr() multiple times; that's the only change in the
memalloc helper side. The rest is nothing but a flip of the dma_type
field in the HD-audio side.
Dongxiang Ke [Tue, 6 Sep 2022 02:49:28 +0000 (10:49 +0800)]
ALSA: usb-audio: Fix an out-of-bounds bug in __snd_usb_parse_audio_interface()
There may be a bad USB audio device with a USB ID of (0x04fa, 0x4201) and
the number of it's interfaces less than 4, an out-of-bounds read bug occurs
when parsing the interface descriptor for this device.
AZA HW may send a burst read/write request crossing 4K memory boundary.
The 4KB boundary is not guaranteed by Tegra HDA HW. Make SW change to
include the flag AZX_DCAPS_4K_BDLE_BOUNDARY to align BDLE to 4K
boundary.
There is a small race window at snd_pcm_oss_sync() that is called from
OSS PCM SNDCTL_DSP_SYNC ioctl; namely the function calls
snd_pcm_oss_make_ready() at first, then takes the params_lock mutex
for the rest. When the stream is set up again by another thread
between them, it leads to inconsistency, and may result in unexpected
results such as NULL dereference of OSS buffer as a fuzzer spotted
recently.
The fix is simply to cover snd_pcm_oss_make_ready() call into the same
params_lock mutex with snd_pcm_oss_make_ready_locked() variant.
ALSA: hda/sigmatel: Keep power up while beep is enabled
It seems that the beep playback doesn't work well on IDT codec devices
when the codec auto-pm is enabled. Keep the power on while the beep
switch is enabled.
ALSA: aloop: Fix random zeros in capture data when using jiffies timer
In loopback_jiffies_timer_pos_update(), we are getting jiffies twice.
First time for playback, second time for capture. Jiffies can be updated
between these two calls and if the capture jiffies is larger, extra zeros
will be filled in the capture buffer.
Change to get jiffies once and use it for both playback and capture.
ALSA: usb-audio: Clean up endpoint setups at PCM prepare
This patch cleans up the superfluous checks and calls for setting up
the endpoints at PCM prepare callback:
- Drop stop_endpoints() and sync_pending_stops() calls; the stream is
guaranteed to have been already stopped and synced at each PCM
prepare call by ALSA PCM core
- Call snd_usb_endpoint_prepare() unconditionally;
the check for endpoint->need_setup is done in
snd_pcm_hw_endpoint_prepare() itself
- Apply snd_usb_set_format_quirk() only when the endpoint is actually
set up (i.e. the return code from snd_usb_endpoint_prepare() > 0)
- Move a few lines back into snd_usb_pcm_prepare();
it's even easier to follow than a small useless function
ALSA: usb-audio: Split endpoint setups for hw_params and prepare
One of the former changes for the endpoint management was the more
consistent setup of endpoints at hw_params.
snd_usb_endpoint_configure() is a single function that does the full
setup, and it's called from both PCM hw_params and prepare callbacks.
Although the EP setup at the prepare phase is usually skipped (by
checking need_setup flag), it may be still effective in some cases
like suspend/resume that requires the interface setup again.
As it's a full and single setup, the invocation of
snd_usb_endpoint_configure() includes not only the USB interface setup
but also the buffer release and allocation. OTOH, doing the buffer
release and re-allocation at PCM prepare phase is rather superfluous,
and better to be done only in the hw_params phase.
For those optimizations, this patch splits the endpoint setup to two
phases: snd_usb_endpoint_set_params() and snd_usb_endpoint_prepare(),
to be called from hw_params and from prepare, respectively.
Note that this patch changes the driver operation slightly,
effectively moving the USB interface setup again to PCM prepare stage
instead of hw_params stage, while the buffer allocation and such
initializations are still done at hw_params stage.
And, the change of the USB interface setup timing (moving to prepare)
gave an interesting "fix", too: it was reported that the recent
kernels caused silent output at the beginning on playbacks on some
devices on Android, and this change casually fixed the regression.
It seems that those devices are picky about the sample rate change (or
the interface change?), and don't follow the too immediate rate
changes.
Meanwhile, Android operates the PCM in the following order:
- open, then hw_params with the possibly highest sample rate
- close without prepare
- re-open, hw_params with the normal sample rate
- prepare, and start streaming
This procedure ended up the hw_params twice with different rates, and
because the recent kernel did set up the sample rate twice one and
after, it screwed up the device. OTOH, the earlier kernels didn't set
up the USB interface at hw_params, hence this problem didn't appear.
Now, with this patch, the USB interface setup is again back to the
prepare phase, and it works around the problem automagically.
Although we should address the sample rate problem in a more solid
way in future, let's keep things working as before for now.
Takashi Iwai [Wed, 31 Aug 2022 13:00:21 +0000 (15:00 +0200)]
ALSA: usb-audio: Drop superfluous interface setup at parsing
We reset each interface that is being parsed for each stream, but this
is superfluous and even can lead to spurious errors. Since the
interface is set up properly at opening the endpoint for each actual
stream operation, let's drop the superfluous one.
Takashi Iwai [Wed, 31 Aug 2022 12:59:01 +0000 (14:59 +0200)]
ALSA: usb-audio: Register card again for iface over delayed_register option
When the delayed registration is specified via either delayed_register
option or the quirk, we delay the invocation of snd_card_register()
until the given interface. But if a wrong value has been set there
and there are more interfaces over the given interface number,
snd_card_register() call would be missing for those interfaces.
This patch catches up those missing calls by fixing the comparison of
the interface number. Now the call is skipped only if the processed
interface is less than the given interface, instead of the exact
match.
Takashi Iwai [Wed, 31 Aug 2022 12:59:00 +0000 (14:59 +0200)]
ALSA: usb-audio: Inform the delayed registration more properly
The info message that was added in the commit a4aad5636c72 ("ALSA:
usb-audio: Inform devices that need delayed registration") is actually
useful to know the need for the delayed registration. However, it
turned out that this doesn't catch the all cases; namely, this warned
only when a PCM stream is attached onto the existing PCM instance, but
it doesn't count for a newly created PCM instance. This made
confusion as if there were no further delayed registration.
This patch moves the check to the code path for either adding a stream
or creating a PCM instance. Also, make it simpler by checking the
card->registered flag instead of querying each snd_device state.
ALSA: hda/hdmi: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
Zero-length arrays are deprecated and we are moving towards adopting
C99 flexible-array members, instead. So, replace zero-length array
declaration in union audio_infoframe with the new DECLARE_FLEX_ARRAY()
helper macro.
This helper allows for a flexible-array member in a union.
Takashi Iwai [Sun, 28 Aug 2022 07:41:43 +0000 (09:41 +0200)]
ALSA: usb-audio: Add quirk for LH Labs Geek Out HD Audio 1V5
The USB DAC from LH Labs (2522:0007) seems requiring the same quirk as
Sony Walkman to set up the interface like UAC1; otherwise it gets the
constant errors "usb_set_interface failed (-71)". This patch adds a
quirk entry for addressing the buggy behavior.
Dan Carpenter [Fri, 26 Aug 2022 15:01:10 +0000 (18:01 +0300)]
ALSA: control: Re-order bounds checking in get_ctl_id_hash()
These two checks are in the reverse order so it might read one element
beyond the end of the array. First check if the "i" is within bounds
before using it.
Zheyu Ma [Wed, 24 Aug 2022 08:16:54 +0000 (16:16 +0800)]
ALSA: control: Fix an out-of-bounds bug in get_ctl_id_hash()
Since the user can control the arguments provided to the kernel by the
ioctl() system call, an out-of-bounds bug occurs when the 'id->name'
provided by the user does not end with '\0'.
The following log can reveal it:
[ 10.002313] BUG: KASAN: stack-out-of-bounds in snd_ctl_find_id+0x36c/0x3a0
[ 10.002895] Read of size 1 at addr ffff888109f5fe28 by task snd/439
[ 10.004934] Call Trace:
[ 10.007140] snd_ctl_find_id+0x36c/0x3a0
[ 10.007489] snd_ctl_ioctl+0x6cf/0x10e0
Fix this by checking the bound of 'id->name' in the loop.
Takashi Iwai [Wed, 24 Aug 2022 06:03:46 +0000 (08:03 +0200)]
Merge branch 'topic/memalloc-cleanup' into for-next
ALSA: Drop hackish GFP giveaway for CONTINUOUS pages
This is a series of cleanup patches for dropping the current hackish
way of passing the GFP_* flags for CONTINOUS and VMALLOC memory
allocations. There are only three users for this legacy feature, and
all of them seem superfluous. And, if any driver requires the memory
restriction in future, it can now pass the proper device pointer for
specifying the DMA mask.
Takashi Iwai [Tue, 23 Aug 2022 11:57:40 +0000 (13:57 +0200)]
ALSA: doc: Drop snd_dma_continuous_data() usages
Update the documentation to follow the recent change of the memory
allocation helpers. The macro snd_dma_continuous_data() is gone, and
the driver needs to set up the coherent dma mask for allocating in the
lower memory addresses, instead.
Takashi Iwai [Tue, 23 Aug 2022 11:57:39 +0000 (13:57 +0200)]
ALSA: memalloc: Drop special handling of GFP for CONTINUOUS allocation
Now that all users of snd_dma_continuous_data() is gone, let's drop
this ugly (and dangerous) way.
After this commit, SNDRV_DMA_TYPE_CONTINUOUS may take the standard
device pointer instead of the hacked pointer by the macro above, and
the memalloc core refers to the coherent_dma_mask of the given
device like other SNDRV_DMA_TYPE. It's still allowed to pass NULL
there, and in that case, the allocation is performed always in the
normal zone.
For SNDRV_DMA_TYPE_VMALLOC, the device pointer is simply ignored.
Takashi Iwai [Tue, 23 Aug 2022 11:57:38 +0000 (13:57 +0200)]
ASoC: Intel: sst: Switch to standard device pages
ASoC Atom SST driver is using the continuous RAM pages with GFP_DMA
flag for its PCM buffer, but this should work fine with the standard
DMA pages. As a part of cleanup work, this patch replaces the buffer
allocation to the standard device pages with SNDRV_DMA_TYPE_DEV.
Takashi Iwai [Tue, 23 Aug 2022 11:57:37 +0000 (13:57 +0200)]
ALSA: pdaudiocf: Drop superfluous GFP setup
The extra setup with GFP_DMA32 is superfluous for this driver. The
whole operation is a simple copy loop, and there is no memory address
restriction at all. Drop the useless GFP setup.
Takashi Iwai [Tue, 23 Aug 2022 11:57:36 +0000 (13:57 +0200)]
ALSA: vx: Drop superfluous GFP setup
The extra setup with GFP_DMA32 is superfluous for this driver. The
whole operation is a simple copy loop, and there is no memory address
restriction at all. Drop the useless GFP setup.
Peter Ujfalusi [Tue, 23 Aug 2022 12:24:05 +0000 (15:24 +0300)]
ALSA: hda: intel-nhlt: Correct the handling of fmt_config flexible array
The struct nhlt_format's fmt_config is a flexible array, it must not be
used as normal array.
When moving to the next nhlt_fmt_cfg we need to take into account the data
behind the ->config.caps (indicated by ->config.size).
Takashi Iwai [Tue, 23 Aug 2022 07:27:17 +0000 (09:27 +0200)]
ALSA: seq: Fix data-race at module auto-loading
It's been reported that there is a possible data-race accessing to the
global card_requested[] array at ALSA sequencer core, which is used
for determining whether to call request_module() for the card or not.
This data race itself is almost harmless, as it might end up with one
extra request_module() call for the already loaded module at most.
But it's still better to fix.
This patch addresses the possible data race of card_requested[] and
client_requested[] arrays by replacing them with bitmask.
It's an atomic operation and can work without locks.
Takashi Iwai [Tue, 23 Aug 2022 07:27:16 +0000 (09:27 +0200)]
ALSA: seq: oss: Fix data-race for max_midi_devs access
ALSA OSS sequencer refers to a global variable max_midi_devs at
creating a new port, storing it to its own field. Meanwhile this
variable may be changed by other sequencer events at
snd_seq_oss_midi_check_exit_port() in parallel, which may cause a data
race.
OTOH, this data race itself is almost harmless, as the access to the
MIDI device is done via get_mdev() and it's protected with a refcount,
hence its presence is guaranteed.
Though, it's sill better to address the data-race from the code sanity
POV, and this patch adds the proper spinlock for the protection.
Takashi Iwai [Sun, 21 Aug 2022 15:59:11 +0000 (17:59 +0200)]
ALSA: memalloc: Revive x86-specific WC page allocations again
We dropped the x86-specific hack for WC-page allocations with a hope
that the standard dma_alloc_wc() works nowadays. Alas, it doesn't,
and we need to take back some workaround again, but in a different
form, as the previous one was broken for some platforms.
This patch re-introduces the x86-specific WC-page allocations, but it
uses rather the manual page allocations instead of
dma_alloc_coherent(). The use of dma_alloc_coherent() was also a
potential problem in the recent addition of the fallback allocation
for noncontig pages, and this patch eliminates both at once.
Linus Torvalds [Sun, 21 Aug 2022 22:09:55 +0000 (15:09 -0700)]
Merge tag 'irq-urgent-2022-08-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
"Misc irqchip fixes: LoongArch driver fixes and a Hyper-V IOMMU fix"
* tag 'irq-urgent-2022-08-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/loongson-liointc: Fix an error handling path in liointc_init()
irqchip/loongarch: Fix irq_domain_alloc_fwnode() abuse
irqchip/loongson-pch-pic: Move find_pch_pic() into CONFIG_ACPI
irqchip/loongson-eiointc: Fix a build warning
irqchip/loongson-eiointc: Fix irq affinity setting
iommu/hyper-v: Use helper instead of directly accessing affinity
Linus Torvalds [Sun, 21 Aug 2022 22:01:51 +0000 (15:01 -0700)]
Merge tag 'perf-urgent-2022-08-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 kprobes fix from Ingo Molnar:
"Fix a kprobes bug in JNG/JNLE emulation when a kprobe is installed at
such instructions, possibly resulting in incorrect execution (the
wrong branch taken)"
* tag 'perf-urgent-2022-08-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kprobes: Fix JNG/JNLE emulation
Linus Torvalds [Sun, 21 Aug 2022 21:49:42 +0000 (14:49 -0700)]
Merge tag 'trace-v6.0-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Various fixes for tracing:
- Fix a return value of traceprobe_parse_event_name()
- Fix NULL pointer dereference from failed ftrace enabling
- Fix NULL pointer dereference when asking for registers from eprobes
- Make eprobes consistent with kprobes/uprobes, filters and
histograms"
* tag 'trace-v6.0-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Have filter accept "common_cpu" to be consistent
tracing/probes: Have kprobes and uprobes use $COMM too
tracing/eprobes: Have event probes be consistent with kprobes and uprobes
tracing/eprobes: Fix reading of string fields
tracing/eprobes: Do not hardcode $comm as a string
tracing/eprobes: Do not allow eprobes to use $stack, or % for regs
ftrace: Fix NULL pointer dereference in is_ftrace_trampoline when ftrace is dead
tracing/perf: Fix double put of trace event when init fails
tracing: React to error return from traceprobe_parse_event_name()
tracing: Have filter accept "common_cpu" to be consistent
Make filtering consistent with histograms. As "cpu" can be a field of an
event, allow for "common_cpu" to keep it from being confused with the
"cpu" field of the event.
tracing/probes: Have kprobes and uprobes use $COMM too
Both $comm and $COMM can be used to get current->comm in eprobes and the
filtering and histogram logic. Make kprobes and uprobes consistent in this
regard and allow both $comm and $COMM as well. Currently kprobes and
uprobes only handle $comm, which is inconsistent with the other utilities,
and can be confusing to users.
tracing/eprobes: Have event probes be consistent with kprobes and uprobes
Currently, if a symbol "@" is attempted to be used with an event probe
(eprobes), it will cause a NULL pointer dereference crash.
Both kprobes and uprobes can reference data other than the main registers.
Such as immediate address, symbols and the current task name. Have eprobes
do the same thing.
For "comm", if "comm" is used and the event being attached to does not
have the "comm" field, then make it the "$comm" that kprobes has. This is
consistent to the way histograms and filters work.
Currently when an event probe (eprobe) hooks to a string field, it does
not display it as a string, but instead as a number. This makes the field
rather useless. Handle the different kinds of strings, dynamic, static,
relational/dynamic etc.
Now when a string field is used, the ":string" type can be used to display
it:
tracing/eprobes: Do not hardcode $comm as a string
The variable $comm is hard coded as a string, which is true for both
kprobes and uprobes, but for event probes (eprobes) it is a field name. In
most cases the "comm" field would be a string, but there's no guarantee of
that fact.
Do not assume that comm is a string. Not to mention, it currently forces
comm fields to fault, as string processing for event probes is currently
broken.
tracing/eprobes: Do not allow eprobes to use $stack, or % for regs
While playing with event probes (eprobes), I tried to see what would
happen if I attempted to retrieve the instruction pointer (%rip) knowing
that event probes do not use pt_regs. The result was:
Move the testing for TPARG_FL_TPOINT which is only used for event probes
to the top of the "$" variable check, as all the other variables are not
used for event probes. Also add a check in the register parsing "%" to
fail if an event probe is used.
Yang Jihong [Thu, 18 Aug 2022 03:26:59 +0000 (11:26 +0800)]
ftrace: Fix NULL pointer dereference in is_ftrace_trampoline when ftrace is dead
ftrace_startup does not remove ops from ftrace_ops_list when
ftrace_startup_enable fails:
register_ftrace_function
ftrace_startup
__register_ftrace_function
...
add_ftrace_ops(&ftrace_ops_list, ops)
...
...
ftrace_startup_enable // if ftrace failed to modify, ftrace_disabled is set to 1
...
return 0 // ops is in the ftrace_ops_list.
When ftrace_disabled = 1, unregister_ftrace_function simply returns without doing anything:
unregister_ftrace_function
ftrace_shutdown
if (unlikely(ftrace_disabled))
return -ENODEV; // return here, __unregister_ftrace_function is not executed,
// as a result, ops is still in the ftrace_ops_list
__unregister_ftrace_function
...
If ops is dynamically allocated, it will be free later, in this case,
is_ftrace_trampoline accesses NULL pointer:
is_ftrace_trampoline
ftrace_ops_trampoline
do_for_each_ftrace_op(op, ftrace_ops_list) // OOPS! op may be NULL!
tracing/perf: Fix double put of trace event when init fails
If in perf_trace_event_init(), the perf_trace_event_open() fails, then it
will call perf_trace_event_unreg() which will not only unregister the perf
trace event, but will also call the put() function of the tp_event.
The problem here is that the trace_event_try_get_ref() is called by the
caller of perf_trace_event_init() and if perf_trace_event_init() returns a
failure, it will then call trace_event_put(). But since the
perf_trace_event_unreg() already called the trace_event_put() function, it
triggers a WARN_ON().
WARNING: CPU: 1 PID: 30309 at kernel/trace/trace_dynevent.c:46 trace_event_dyn_put_ref+0x15/0x20
If perf_trace_event_reg() does not call the trace_event_try_get_ref() then
the perf_trace_event_unreg() should not be calling trace_event_put(). This
breaks symmetry and causes bugs like these.
Pull out the trace_event_put() from perf_trace_event_unreg() and call it
in the locations that perf_trace_event_unreg() is called. This not only
fixes this bug, but also brings back the proper symmetry of the reg/unreg
vs get/put logic.
Lukas Bulwahn [Thu, 11 Aug 2022 07:17:34 +0000 (09:17 +0200)]
tracing: React to error return from traceprobe_parse_event_name()
The function traceprobe_parse_event_name() may set the first two function
arguments to a non-null value and still return -EINVAL to indicate an
unsuccessful completion of the function. Hence, it is not sufficient to
just check the result of the two function arguments for being not null,
but the return value also needs to be checked.
Commit 95c104c378dc ("tracing: Auto generate event name when creating a
group of events") changed the error-return-value checking of the second
traceprobe_parse_event_name() invocation in __trace_eprobe_create() and
removed checking the return value to jump to the error handling case.
Reinstate using the return value in the error-return-value checking.
Linus Torvalds [Sun, 21 Aug 2022 18:18:33 +0000 (11:18 -0700)]
Merge tag 'i2c-for-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"A revert to fix a regression introduced this merge window and a fix
for proper error handling in the remove path of the iMX driver"
* tag 'i2c-for-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: imx: Make sure to unregister adapter on remove()
Revert "i2c: scmi: Replace open coded device_get_match_data()"
Linus Torvalds [Sun, 21 Aug 2022 17:21:16 +0000 (10:21 -0700)]
Merge tag '6.0-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client fixes from Steve French:
- memory leak fix
- two small cleanups
- trivial strlcpy removal
- update missing entry for cifs headers in MAINTAINERS file
* tag '6.0-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: move from strlcpy with unused retval to strscpy
cifs: Fix memory leak on the deferred close
cifs: remove useless parameter 'is_fsctl' from SMB2_ioctl()
cifs: remove unused server parameter from calc_smb_size()
cifs: missing directory in MAINTAINERS file
Nick Desaulniers [Fri, 19 Aug 2022 19:06:40 +0000 (12:06 -0700)]
asm goto: eradicate CC_HAS_ASM_GOTO
GCC has supported asm goto since 4.5, and Clang has since version 9.0.0.
The minimum supported versions of these tools for the build according to
Documentation/process/changes.rst are 5.1 and 11.0.0 respectively.
Remove the feature detection script, Kconfig option, and clean up some
fallback code that is no longer supported.
The removed script was also testing for a GCC specific bug that was
fixed in the 4.7 release.
Also remove workarounds for bpftrace using clang older than 9.0.0, since
other BPF backend fixes are required at this point.
i2c: imx: Make sure to unregister adapter on remove()
If for whatever reasons pm_runtime_resume_and_get() fails and .remove() is
exited early, the i2c adapter stays around and the irq still calls its
handler, while the driver data and the register mapping go away. So if
later the i2c adapter is accessed or the irq triggers this results in
havoc accessing freed memory and unmapped registers.
So unregister the software resources even if resume failed, and only skip
the hardware access in that case.
Fixes: 588eb93ea49f ("i2c: imx: add runtime pm support to improve the performance") Signed-off-by: Uwe Kleine-König <[email protected]> Acked-by: Oleksij Rempel <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
Wolfram Sang [Thu, 18 Aug 2022 20:31:13 +0000 (22:31 +0200)]
Revert "i2c: scmi: Replace open coded device_get_match_data()"
This reverts commit 9ae551ded5ba55f96a83cd0811f7ef8c2f329d0c. We got a
regression report, so ensure this machine boots again. We will come back
with a better version hopefully.
Linus Torvalds [Sat, 20 Aug 2022 21:55:38 +0000 (14:55 -0700)]
Merge tag 'kbuild-fixes-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix module versioning broken on some architectures
- Make dummy-tools enable CONFIG_PPC_LONG_DOUBLE_128
- Remove -Wformat-zero-length, which has no warning instance
- Fix the order between drivers and libs in modules.order
- Fix false-positive warnings in clang-analyzer
* tag 'kbuild-fixes-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
scripts/clang-tools: Remove DeprecatedOrUnsafeBufferHandling check
kbuild: fix the modules order between drivers and libs
scripts/Makefile.extrawarn: Do not disable clang's -Wformat-zero-length
kbuild: dummy-tools: pretend we understand __LONG_DOUBLE_128__
modpost: fix module versioning when a symbol lacks valid CRC
* tag 'perf-tools-fixes-for-v6.0-2022-08-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf tools: Support reading PERF_FORMAT_LOST
libperf: Add a test case for read formats
libperf: Handle read format in perf_evsel__read()
tools headers UAPI: Sync linux/perf_event.h with the kernel sources
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
tools headers UAPI: Sync KVM's vmx.h header with the kernel sources
tools include UAPI: Sync linux/vhost.h with the kernel sources
tools headers kvm s390: Sync headers with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync linux/fscrypt.h with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf beauty: Update copy of linux/socket.h with the kernel sources
perf cpumap: Fix alignment for masks in event encoding
perf cpumap: Compute mask size in constant time
perf cpumap: Synthetic events and const/static
perf cpumap: Const map for max()
Linus Torvalds [Sat, 20 Aug 2022 18:29:01 +0000 (11:29 -0700)]
Merge tag 's390-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Fix a KVM crash on z12 and older machines caused by a wrong
assumption that Query AP Configuration Information is always
available.
- Lower severity of excessive Hypervisor filesystem error messages
when booting under KVM.
* tag 's390-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/ap: fix crash on older machines based on QCI info missing
s390/hypfs: avoid error message under KVM
Linus Torvalds [Sat, 20 Aug 2022 17:49:02 +0000 (10:49 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"A few minor fixes:
- Fix buffer management in SRP to correct a regression with the login
authentication feature from v5.17
- Don't iterate over non-present ports in mlx5
- Fix an error introduced by the foritify work in cxgb4
- Two bug fixes for the recently merged ERDMA driver
- Unbreak RDMA dmabuf support, a regresion from v5.19"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA: Handle the return code from dma_resv_wait_timeout() properly
RDMA/erdma: Correct the max_qp and max_cq capacities of the device
RDMA/erdma: Using the key in FMR WR instead of MR structure
RDMA/cxgb4: fix accept failure due to increased cpl_t5_pass_accept_rpl size
RDMA/mlx5: Use the proper number of ports
IB/iser: Fix login with authentication
This `clang-analyzer` check flags the use of memset(), suggesting a more
secure version of the API, such as memset_s(), which does not exist in
the kernel:
warning: Call to function 'memset' is insecure as it does not provide
security checks introduced in the C11 standard. Replace with analogous
functions that support length arguments or provides boundary checks such
as 'memset_s' in case of C11
[clang-analyzer-security.insecureAPI.DeprecatedOrUnsafeBufferHandling]
scripts/Makefile.extrawarn: Do not disable clang's -Wformat-zero-length
There are no instances of this warning in the tree across several
difference architectures and configurations. This was added by
commit 26ea6bb1fef0 ("kbuild, LLVMLinux: Supress warnings unless W=1-3")
back in 2014, where it might have been necessary, but there are no
instances of it now so stop disabling it to increase warning coverage
for clang.
Jiri Slaby [Wed, 10 Aug 2022 09:26:03 +0000 (11:26 +0200)]
kbuild: dummy-tools: pretend we understand __LONG_DOUBLE_128__
There is a test in powerpc's Kconfig which checks __LONG_DOUBLE_128__
and sets CONFIG_PPC_LONG_DOUBLE_128 if it is understood by the compiler.
We currently don't handle it, so this results in PPC_LONG_DOUBLE_128 not
being in super-config generated by dummy-tools. So take this into
account in the gcc script and preprocess __LONG_DOUBLE_128__ as "1".
Masahiro Yamada [Tue, 9 Aug 2022 14:11:17 +0000 (23:11 +0900)]
modpost: fix module versioning when a symbol lacks valid CRC
Since commit 7b4537199a4a ("kbuild: link symbol CRCs at final link,
removing CONFIG_MODULE_REL_CRCS"), module versioning is broken on
some architectures. Loading a module fails with "disagrees about
version of symbol module_layout".
On such architectures (e.g. ARCH=sparc build with sparc64_defconfig),
modpost shows a warning, like follows:
WARNING: modpost: EXPORT symbol "_mcount" [vmlinux] version generation failed, symbol will not be versioned.
Is "_mcount" prototyped in <asm/asm-prototypes.h>?
Previously, it was a harmless warning (CRC check was just skipped),
but now wrong CRCs are used for comparison because invalid CRCs are
just skipped.
When the module subsystem looks up a CRC that comes after, it results
in reading out a wrong address. For example, when __crc__printk is
needed, the module subsystem reads 0xc53b44 instead of 0xc53b40.
All CRC entries must be output for correct index accessing. Invalid
CRCs will be unused, but are needed to keep the one-to-one mapping
between __ksymtab_* and __crc_*.
The best is to fix all modpost warnings, but several warnings are still
remaining on less popular architectures.
Fixes: 7b4537199a4a ("kbuild: link symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS") Reported-by: matoro <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]> Tested-by: matoro <[email protected]>
Linus Torvalds [Sat, 20 Aug 2022 17:17:05 +0000 (10:17 -0700)]
Merge tag 'block-6.0-2022-08-19' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few fixes that should go into this release:
- Small series of patches for ublk (ZiyangZhang)
- Remove dead function (Yu)
- Fix for running a block queue in case of resource starvation
(Yufen)"
* tag 'block-6.0-2022-08-19' of git://git.kernel.dk/linux-block:
blk-mq: run queue no matter whether the request is the last request
blk-mq: remove unused function blk_mq_queue_stopped()
ublk_drv: do not add a re-issued request aborted previously to ioucmd's task_work
ublk_drv: update comment for __ublk_fail_req()
ublk_drv: check ubq_daemon_is_dying() in __ublk_rq_task_work()
ublk_drv: update iod->addr for UBLK_IO_NEED_GET_DATA
Linus Torvalds [Sat, 20 Aug 2022 16:49:22 +0000 (09:49 -0700)]
Merge tag 'io_uring-6.0-2022-08-19' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A few fixes for regressions in this cycle:
- Two instances of using the wrong "has async data" helper (Pavel)
- Fixup zero-copy address import (Pavel)
- Bump zero-copy notification slot limit (Pavel)"
* tag 'io_uring-6.0-2022-08-19' of git://git.kernel.dk/linux-block:
io_uring/net: use right helpers for async_data
io_uring/notif: raise limit on notification slots
io_uring/net: improve zc addr import error handling
io_uring/net: use right helpers for async recycle
Linus Torvalds [Sat, 20 Aug 2022 16:43:45 +0000 (09:43 -0700)]
Merge tag 'ata-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA fixes from Damien Le Moal:
- Add a missing command name definition for ata_get_cmd_name(), from
me.
- A fix to address a performance regression due to the default
max_sectors queue limit for ATA devices connected to AHCI adapters
being too small, from John.
* tag 'ata-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata: Set __ATA_BASE_SHT max_sectors
ata: libata-eh: Add missing command name
Linus Torvalds [Sat, 20 Aug 2022 16:39:00 +0000 (09:39 -0700)]
Merge tag 'mmc-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC host fixes from Ulf Hansson:
- meson-gx: Fix error handling in ->probe()
- mtk-sd: Fix a command problem when using cqe off/disable
- pxamci: Fix error handling in ->probe()
- sdhci-of-dwcmshc: Fix broken support for the BlueField-3 variant
* tag 'mmc-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-of-dwcmshc: Re-enable support for the BlueField-3 SoC
mmc: meson-gx: Fix an error handling path in meson_mmc_probe()
mmc: mtk-sd: Clear interrupts when cqe off/disable
mmc: pxamci: Fix another error handling path in pxamci_probe()
mmc: pxamci: Fix an error handling path in pxamci_probe()
John Garry [Wed, 17 Aug 2022 15:20:08 +0000 (23:20 +0800)]
ata: libata: Set __ATA_BASE_SHT max_sectors
Commit 0568e6122574 ("ata: libata-scsi: cap ata_device->max_sectors
according to shost->max_sectors") inadvertently capped the max_sectors
value for some SATA disks to a value which is lower than we would want.
For a device which supports LBA48, we would previously have request queue
max_sectors_kb and max_hw_sectors_kb values of 1280 and 32767 respectively.
For AHCI controllers, the value chosen for shost max sectors comes from
the minimum of the SCSI host default max sectors in
SCSI_DEFAULT_MAX_SECTORS (1024) and the shost DMA device mapping limit.
This means that we would now set the max_sectors_kb and max_hw_sectors_kb
values for a disk which supports LBA48 at 512, ignoring DMA mapping limit.
As report by Oliver at [0], this caused a performance regression.
Fix by picking a large enough max sectors value for ATA host controllers
such that we don't needlessly reduce max_sectors_kb for LBA48 disks.
Fixes: 0568e6122574 ("ata: libata-scsi: cap ata_device->max_sectors according to shost->max_sectors") Reported-by: Oliver Sang <[email protected]> Signed-off-by: John Garry <[email protected]> Signed-off-by: Damien Le Moal <[email protected]>
Linus Torvalds [Fri, 19 Aug 2022 20:56:14 +0000 (13:56 -0700)]
Merge tag 'hardening-v6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- Also undef LATENT_ENTROPY_PLUGIN for per-file disabling (Andrew
Donnellan)
- Return EFAULT on copy_from_user() failures in LoadPin (Kees Cook)
* tag 'hardening-v6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
gcc-plugins: Undefine LATENT_ENTROPY_PLUGIN when plugin disabled for a file
LoadPin: Return EFAULT on copy_from_user() failures
Linus Torvalds [Fri, 19 Aug 2022 20:40:11 +0000 (13:40 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix unexpected sign extension of KVM_ARM_DEVICE_ID_MASK
- Tidy-up handling of AArch32 on asymmetric systems
x86:
- Fix 'missing ENDBR' BUG for fastop functions
Generic:
- Some cleanup and static analyzer patches
- More fixes to KVM_CREATE_VM unwind paths"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: Drop unnecessary initialization of "ops" in kvm_ioctl_create_device()
KVM: Drop unnecessary initialization of "npages" in hva_to_pfn_slow()
x86/kvm: Fix "missing ENDBR" BUG for fastop functions
x86/kvm: Simplify FOP_SETCC()
x86/ibt, objtool: Add IBT_NOSEAL()
KVM: Rename mmu_notifier_* to mmu_invalidate_*
KVM: Rename KVM_PRIVATE_MEM_SLOTS to KVM_INTERNAL_MEM_SLOTS
KVM: MIPS: remove unnecessary definition of KVM_PRIVATE_MEM_SLOTS
KVM: Move coalesced MMIO initialization (back) into kvm_create_vm()
KVM: Unconditionally get a ref to /dev/kvm module when creating a VM
KVM: Properly unwind VM creation if creating debugfs fails
KVM: arm64: Reject 32bit user PSTATE on asymmetric systems
KVM: arm64: Treat PMCR_EL1.LC as RES1 on asymmetric systems
KVM: arm64: Fix compile error due to sign extension
Linus Torvalds [Fri, 19 Aug 2022 20:33:48 +0000 (13:33 -0700)]
Merge tag 'for-6.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few short fixes and a lockdep warning fix (needs moving some code):
- tree-log replay fixes:
- fix error handling when looking up extent refs
- fix warning when setting inode number of links
- relocation fixes:
- reset block group read-only status when relocation fails
- unset control structure if transaction fails when starting
to process a block group
- add lockdep annotations to fix a warning during relocation
where blocks temporarily belong to another tree and can lead
to reversed dependencies
- tree-checker verifies that extent items don't overlap"
* tag 'for-6.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: tree-checker: check for overlapping extent items
btrfs: fix warning during log replay when bumping inode link count
btrfs: fix lost error handling when looking up extended ref on log replay
btrfs: fix lockdep splat with reloc root extent buffers
btrfs: move lockdep class helpers to locking.c
btrfs: unset reloc control if transaction commit fails in prepare_to_relocate()
btrfs: reset RO counter on block group if we fail to relocate
Linus Torvalds [Fri, 19 Aug 2022 20:26:52 +0000 (13:26 -0700)]
Merge tag '5.20-rc2-ksmbd-smb3-server-fixes' of git://git.samba.org/ksmbd
Pull ksmbd server fixes from Steve French:
- important sparse file fix
- allocation size fix
- fix incorrect rc on bad share
- share config fix
* tag '5.20-rc2-ksmbd-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: don't remove dos attribute xattr on O_TRUNC open
ksmbd: remove unnecessary generic_fillattr in smb2_open
ksmbd: request update to stale share config
ksmbd: return STATUS_BAD_NETWORK_NAME error status if share is not configured
Namhyung Kim [Fri, 19 Aug 2022 00:36:44 +0000 (17:36 -0700)]
perf tools: Support reading PERF_FORMAT_LOST
The recent kernel added lost count can be read from either read(2) or
ring buffer data with PERF_SAMPLE_READ. As it's a variable length data
we need to access it according to the format info.
But for perf tools use cases, PERF_FORMAT_ID is always set. So we can
only check PERF_FORMAT_LOST bit to determine the data format.
Add sample_read_value_size() and next_sample_read_value() helpers to
make it a bit easier to access. Use them in all places where it reads
the struct sample_read_value.
Namhyung Kim [Fri, 19 Aug 2022 00:36:43 +0000 (17:36 -0700)]
libperf: Add a test case for read formats
It checks a various combination of the read format settings and verify
it return the value in a proper position. The test uses task-clock
software events to guarantee it's always active and sets enabled/running
time.
Namhyung Kim [Fri, 19 Aug 2022 00:36:42 +0000 (17:36 -0700)]
libperf: Handle read format in perf_evsel__read()
The perf_counts_values should be increased to read the new lost data.
Also adjust values after read according the read format.
This supports PERF_FORMAT_GROUP which has a different data format but
it's only available for leader events. Currently it doesn't have an API
to read sibling (member) events in the group. But users may read the
sibling event directly.
Also reading from mmap would be disabled when the read format has ID or
LOST bit as it's not exposed via mmap.
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
To pick the changes in:
43bb9e000ea4c621 ("KVM: x86: Tweak name of MONITOR/MWAIT #UD quirk to make it #UD specific") 94dfc73e7cf4a31d ("treewide: uapi: Replace zero-length arrays with flexible-array members") bfbcc81bb82cbbad ("KVM: x86: Add a quirk for KVM's "MONITOR/MWAIT are NOPs!" behavior") b172862241b48499 ("KVM: x86: PIT: Preserve state of speaker port data bit") ed2351174e38ad4f ("KVM: x86: Extend KVM_{G,S}ET_VCPU_EVENTS to support pending triple fault")
That just rebuilds kvm-stat.c on x86, no change in functionality.
This silences these perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h'
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
That makes 'perf kvm-stat' aware of this new NOTIFY exit reason, thus
addressing the following perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/vmx.h' differs from latest version at 'arch/x86/include/uapi/asm/vmx.h'
diff -u tools/arch/x86/include/uapi/asm/vmx.h arch/x86/include/uapi/asm/vmx.h
Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h'
diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h
To pick up these changes and support them:
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before
$ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after
$ diff -u before after
--- before 2022-08-18 09:46:12.355958316 -0300
+++ after 2022-08-18 09:46:19.701182822 -0300
@@ -29,6 +29,7 @@
[0x75] = "VDPA_SET_VRING_ENABLE",
[0x77] = "VDPA_SET_CONFIG_CALL",
[0x7C] = "VDPA_SET_GROUP_ASID",
+ [0x7D] = "VDPA_SUSPEND",
};
= {
[0x00] = "GET_FEATURES",
$
For instance, see how those 'cmd' ioctl arguments get translated, now
VDPA_SUSPEND will be as well:
tools headers kvm s390: Sync headers with the kernel sources
To pick the changes in:
f5ecfee944934757 ("KVM: s390: resetting the Topology-Change-Report")
None of them trigger any changes in tooling, this time this is just to silence
these perf build warnings:
Warning: Kernel ABI header at 'tools/arch/s390/include/uapi/asm/kvm.h' differs from latest version at 'arch/s390/include/uapi/asm/kvm.h'
diff -u tools/arch/s390/include/uapi/asm/kvm.h arch/s390/include/uapi/asm/kvm.h
tools headers UAPI: Sync linux/kvm.h with the kernel sources
To pick the changes in:
8a061562e2f2b32b ("RISC-V: KVM: Add extensible CSR emulation framework") f5ecfee944934757 ("KVM: s390: resetting the Topology-Change-Report") 450a563924ae9437 ("KVM: stats: Fix value for KVM_STATS_UNIT_MAX for boolean stats") 1b870fa5573e260b ("kvm: stats: tell userspace which values are boolean") db1c875e0539518e ("KVM: s390: add KVM_S390_ZPCI_OP to manage guest zPCI devices") 94dfc73e7cf4a31d ("treewide: uapi: Replace zero-length arrays with flexible-array members") 084cc29f8bbb034c ("KVM: x86/MMU: Allow NX huge pages to be disabled on a per-vm basis") 2f4073e08f4cc5a4 ("KVM: VMX: Enable Notify VM exit") ed2351174e38ad4f ("KVM: x86: Extend KVM_{G,S}ET_VCPU_EVENTS to support pending triple fault") e9bf3acb23f0a6e1 ("KVM: s390: Add KVM_CAP_S390_PROTECTED_DUMP") 8aba09588d2af37c ("KVM: s390: Add CPU dump functionality") 0460eb35b443f73f ("KVM: s390: Add configuration dump functionality") fe9a93e07ba4f29d ("KVM: s390: pv: Add query dump information") 35d02493dba1ae63 ("KVM: s390: pv: Add query interface") c24a950ec7d60c4d ("KVM, SEV: Add KVM_EXIT_SHUTDOWN metadata for SEV-ES") ffbb61d09fc56c85 ("KVM: x86: Accept KVM_[GS]ET_TSC_KHZ as a VM ioctl.") 661a20fab7d156cf ("KVM: x86/xen: Advertise and document KVM_XEN_HVM_CONFIG_EVTCHN_SEND") fde0451be8fb3208 ("KVM: x86/xen: Support per-vCPU event channel upcall via local APIC") 28d1629f751c4a5f ("KVM: x86/xen: Kernel acceleration for XENVER_version") 536395260582be74 ("KVM: x86/xen: handle PV timers oneshot mode") 942c2490c23f2800 ("KVM: x86/xen: Add KVM_XEN_VCPU_ATTR_TYPE_VCPU_ID") 2fd6df2f2b47d430 ("KVM: x86/xen: intercept EVTCHNOP_send from guests") 35025735a79eaa89 ("KVM: x86/xen: Support direct injection of event channel events")
That just rebuilds perf, as these patches add just an ioctl that is S390
specific and may clash with other arches, so are so far being excluded
in the harvester script:
$ tools/perf/trace/beauty/kvm_ioctl.sh > before
$ cp include/uapi/linux/kvm.h tools/include/uapi/linux/kvm.h
$ tools/perf/trace/beauty/kvm_ioctl.sh > after
$ diff -u before after
$ grep 390 tools/perf/trace/beauty/kvm_ioctl.sh
egrep -v " ((ARM|PPC|S390)_|[GS]ET_(DEBUGREGS|PIT2|XSAVE|TSC_KHZ)|CREATE_SPAPR_TCE_64)" | \
$
This is also by now used by tools/testing/selftests/kvm/, a simple test
build succeeded.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
That don't add any new ioctl, so no changes in tooling.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
tools headers UAPI: Sync linux/fscrypt.h with the kernel sources
To pick the changes from:
6b2a51ff03bf0c54 ("fscrypt: Add HCTR2 support for filename encryption")
That don't result in any changes in tooling, just causes this to be
rebuilt:
CC /tmp/build/perf-urgent/trace/beauty/sync_file_range.o
LD /tmp/build/perf-urgent/trace/beauty/perf-in.o
addressing this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/fscrypt.h' differs from latest version at 'include/uapi/linux/fscrypt.h'
diff -u tools/include/uapi/linux/fscrypt.h include/uapi/linux/fscrypt.h
tools arch x86: Sync the msr-index.h copy with the kernel sources
To pick up the changes in:
2b1299322016731d ("x86/speculation: Add RSB VM Exit protections") 4af184ee8b2c0a69 ("tools/power turbostat: dump secondary Turbo-Ratio-Limit") 4ad3278df6fe2b08 ("x86/speculation: Disable RRSBA behavior") d7caac991feeef1b ("x86/cpu/amd: Add Spectral Chicken") 6ad0ad2bf8a67e27 ("x86/bugs: Report Intel retbleed vulnerability") c59a1f106f5cd484 ("KVM: x86/pmu: Add IA32_PEBS_ENABLE MSR emulation for extended PEBS") 465932db25f36648 ("x86/cpu: Add new VMX feature, Tertiary VM-Execution control") 027bbb884be006b0 ("KVM: x86/speculation: Disable Fill buffer clear within guests") 51802186158c74a0 ("x86/speculation/mmio: Enumerate Processor MMIO Stale Data bug")
Addressing these tools/perf build warnings:
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
That makes the beautification scripts to pick some new entries:
That don't result in any changes in the tables generated from that
header.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/perf/trace/beauty/include/linux/socket.h' differs from latest version at 'include/linux/socket.h'
diff -u tools/perf/trace/beauty/include/linux/socket.h include/linux/socket.h
Ian Rogers [Tue, 14 Jun 2022 14:33:51 +0000 (07:33 -0700)]
perf cpumap: Fix alignment for masks in event encoding
A mask encoding of a cpu map is laid out as:
u16 nr
u16 long_size
unsigned long mask[];
However, the mask may be 8-byte aligned meaning there is a 4-byte pad
after long_size. This means 32-bit and 64-bit builds see the mask as
being at different offsets. On top of this the structure is in the byte
data[] encoded as:
u16 type
char data[]
This means the mask's struct isn't the required 4 or 8 byte aligned, but
is offset by 2. Consequently the long reads and writes are causing
undefined behavior as the alignment is broken.
Fix the mask struct by creating explicit 32 and 64-bit variants, use a
union to avoid data[] and casts; the struct must be packed so the
layout matches the existing perf.data layout. Taking an address of a
member of a packed struct breaks alignment so pass the packed
perf_record_cpu_map_data to functions, so they can access variables with
the right alignment.
As the 64-bit version has 4 bytes of padding, optimizing writing to only
write the 32-bit version.
Committer notes:
Disable warnings about 'packed' that break the build in some arches like
riscv64, but just around that specific struct.
Linus Torvalds [Fri, 19 Aug 2022 16:46:11 +0000 (09:46 -0700)]
Merge tag 'sound-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The only significant core change is ASoC DPCM fix for asymmetric
setup; other remaining changes are device-specific fixes, including
the hardening of string manipulations.
One change in platform/x86 is the patch I forgot to apply from a
series for CS35L41 codec"
* tag 'sound-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
ALSA: hda/realtek: Add quirk for Clevo NS50PU, NS70PU
ALSA: info: Fix llseek return value when using callback
ALSA: hda/cs8409: Support new Dolphin Variants
platform/x86: serial-multi-instantiate: Add CLSA0101 Laptop
ALSA: hda/realtek: Add quirk for Lenovo Yoga7 14IAL7
ALSA: hda: cs35l41: Clarify support for CSC3551 without _DSD Properties
ALSA: hda/realtek: Add quirks for ASUS Zenbooks using CS35L41
ASoC: codec: tlv320aic32x4: fix mono playback via I2S
ASoC: rt5640: Fix the JD voltage dropping issue
ASoC: tas2770: Fix handling of mute/unmute
ASoC: tas2770: Drop conflicting set_bias_level power setting
ASoC: tas2770: Allow mono streams
ASoC: tas2770: Set correct FSYNC polarity
ASoC: Intel: fix sof_es8336 probe
ASoC: DPCM: Don't pick up BE without substream
ASoC: SOF: ipc3-topology: Fix clang -Wformat warning
ASoC: sh: rz-ssi: Improve error handling in rz_ssi_probe() error path
ASoC: SOF: Intel: hda: Fix potential buffer overflow by snprintf()
ASoC: SOF: debug: Fix potential buffer overflow by snprintf()
ASoC: Intel: avs: Fix potential buffer overflow by snprintf()
...
Linus Torvalds [Fri, 19 Aug 2022 16:39:32 +0000 (09:39 -0700)]
Merge tag 'drm-fixes-2022-08-19' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Regular weekly fixes.
The nouveau patch just enables modesetting on GA103 hw which is like
other ampere cards that are already supported. amdgpu has 2 weeks of
fixes, as Alex was away, so a bit larger than usual, otherwise some
i915 and misc other fixes.
ttm:
- NULL ptr dereference
i915:
- disable pci resize on 32-bit systems
- don't leak the ccs state
- TLB invalidation fixes
nouveau:
- GA103 enablement
- off-by-one fix
amdgpu:
- Revert some DML stack changes
- Rounding fixes in KFD allocations
- atombios vram info table parsing fix
- DCN 3.1.4 fixes
- Clockgating fixes for various new IPs
- SMU 13.0.4 fixes
- DCN 3.1.4 FP fixes
- TMDS fixes for YCbCr420 4k modes
- DCN 3.2.x fixes
- USB 4 fixes
- SMU 13.0 fixes
- SMU driver unload memory leak fixes
- Display orientation fix
- Regression fix for generic fbdev conversion
- SDMA 6.x fixes
- SR-IOV fixes
- IH 6.x fixes
- Use after free fix in bo list handling
- Revert pipe1 support
- XGMI hive reset fix
amdkfd:
- Fix potential crach in kfd_create_indirect_link_prop()
imx:
- warning fix
meson:
- refcounting fix
lvds-codec:
- error check fix
sun4i:
- underflow fix
- dt-binding fix"
* tag 'drm-fixes-2022-08-19' of git://anongit.freedesktop.org/drm/drm: (109 commits)
Revert "drm/amd/amdgpu: add pipe1 hardware support"
drm/amdgpu: Fix use-after-free on amdgpu_bo_list mutex
drm/amdgpu: Fix interrupt handling on ih_soft ring
drm/amdgpu: Add secure display TA load for Renoir
drm/amd/display: Include scaling factor for SubVP command
drm/amdgpu/vcn: Return void from the stop_dbg_mode
drm/amdgpu: remove useless condition in amdgpu_job_stop_all_jobs_on_sched()
drm/amdgpu: Add decode_iv_ts helper for ih_v6 block
drm/amd/display: add chip revision to DCN32
drm/amd/display: avoid doing vm_init multiple time
drm/amd/display: Use pitch when calculating size to cache in MALL
drm/amd/display: Don't set DSC for phantom pipes
drm/amd/display: Update clock table policy for DCN314
drm/amd/display: Modify header inclusion pattern
drm/amd/display: Fix plug/unplug external monitor will hang while playback MPO video
drm/amd/display: Add debug parameter to retain default clock table
drm/amdgpu: Increase tlb flush timeout for sriov
drm/amd/display: do not compare integers of different widths
drm/amd/display: Add reserved dc_log_type.
drm/amd/display: Fix pixel clock programming
...
* tag 'bitmap-6.0-rc2' of https://github.com/norov/linux:
lib/cpumask: drop always-true preprocessor guard
lib/cpumask: add inline cpumask_next_wrap() for UP
cpumask: align signatures of UP implementations
Wolfram Sang [Thu, 18 Aug 2022 21:01:41 +0000 (23:01 +0200)]
cifs: move from strlcpy with unused retval to strscpy
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Aaron Lu [Fri, 19 Aug 2022 02:30:01 +0000 (10:30 +0800)]
x86/mm: Use proper mask when setting PUD mapping
Commit c164fbb40c43f("x86/mm: thread pgprot_t through
init_memory_mapping()") mistakenly used __pgprot() which doesn't respect
__default_kernel_pte_mask when setting PUD mapping.
Fix it by only setting the one bit we actually need (PSE) and leaving
the other bits (that have been properly masked) alone.
projects / linux.git / log