net: sysfs: Fix /sys/class/net/<iface> path for statistics

The Documentation/ABI/testing/sysfs-class-net-statistics documentation
is pointing to the wrong path for the interface.  Documentation is
pointing to /sys/class/<iface>, instead of /sys/class/net/<iface>.

Fix it by adding the `net/` directory before the interface.

Fixes: 6044f9700645 ("net: sysfs: document /sys/class/net/statistics/*")
Signed-off-by: Breno Leitao <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

Merge branch 'mptcp-misc-fixes'

Matthieu Baerts says:

====================
mptcp: locking cleanup & misc. fixes

Patches 1-4 are fixes for issues found by Paolo while working on adding
TCP_NOTSENT_LOWAT support. The latter will need to track more states
under the msk data lock. Since the locking msk locking schema is already
quite complex, do a long awaited clean-up step by moving several
confusing lockless initialization under the relevant locks. Note that it
is unlikely a real race could happen even prior to such patches as the
MPTCP-level state machine implicitly ensures proper serialization of the
write accesses, even lacking explicit lock. But still, simplification is
welcome and this will help for the maintenance. This can be backported
up to v5.6.

Patch 5 is a fix for the userspace PM, not to add new local address
entries if the address is already in the list. This behaviour can be
seen since v5.19.

Patch 6 fixes an issue when Fastopen is used. The issue can happen since
v6.2. A previous fix has already been applied, but not taking care of
all cases according to syzbot.

Patch 7 updates Geliang's email address in the MAINTAINERS file.
====================

Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

MAINTAINERS: update Geliang's email address

Update my email-address in MAINTAINERS and .mailmap entries to my
kernel.org account.

Suggested-by: Mat Martineau <[email protected]>
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

mptcp: really cope with fastopen race

Fastopen and PM-trigger subflow shutdown can race, as reported by
syzkaller.

In my first attempt to close such race, I missed the fact that
the subflow status can change again before the subflow_state_change
callback is invoked.

Address the issue additionally copying with all the states directly
reachable from TCP_FIN_WAIT1.

Fixes: 1e777f39b4d7 ("mptcp: add MSG_FASTOPEN sendmsg flag support")
Fixes: 4fd19a307016 ("mptcp: fix inconsistent state on fastopen race")
Cc: [email protected]
Reported-by: [email protected]
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/458
Signed-off-by: Paolo Abeni <[email protected]>
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

mptcp: check addrs list in userspace_pm_get_local_id

Before adding a new entry in mptcp_userspace_pm_get_local_id(), it's
better to check whether this address is already in userspace pm local
address list. If it's in the list, no need to add a new entry, just
return it's address ID and use this address.

Fixes: 8b20137012d9 ("mptcp: read attributes of addr entries managed by userspace PMs")
Cc: [email protected]
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

mptcp: corner case locking for rx path fields initialization

Most MPTCP-level related fields are under the mptcp data lock
protection, but are written one-off without such lock at MPC
complete time, both for the client and the server

Leverage the mptcp_propagate_state() infrastructure to move such
initialization under the proper lock client-wise.

The server side critical init steps are done by
mptcp_subflow_fully_established(): ensure the caller properly held the
relevant lock, and avoid acquiring the same lock in the nested scopes.

There are no real potential races, as write access to such fields
is implicitly serialized by the MPTCP state machine; the primary
goal is consistency.

Fixes: d22f4988ffec ("mptcp: process MP_CAPABLE data option")
Cc: [email protected]
Signed-off-by: Paolo Abeni <[email protected]>
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

mptcp: fix more tx path fields initialization

The 'msk->write_seq' and 'msk->snd_nxt' are always updated under
the msk socket lock, except at MPC handshake completiont time.

Builds-up on the previous commit to move such init under the relevant
lock.

There are no known problems caused by the potential race, the
primary goal is consistency.

Fixes: 6d0060f600ad ("mptcp: Write MPTCP DSS headers to outgoing data packets")
Cc: [email protected]
Signed-off-by: Paolo Abeni <[email protected]>
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

mptcp: fix rcv space initialization

mptcp_rcv_space_init() is supposed to happen under the msk socket
lock, but active msk socket does that without such protection.

Leverage the existing mptcp_propagate_state() helper to that extent.
We need to ensure mptcp_rcv_space_init will happen before
mptcp_rcv_space_adjust(), and the release_cb does not assure that:
explicitly check for such condition.

While at it, move the wnd_end initialization out of mptcp_rcv_space_init(),
it never belonged there.

Note that the race does not produce ill effect in practice, but
change allows cleaning-up and defying better the locking model.

Fixes: a6b118febbab ("mptcp: add receive buffer auto-tuning")
Cc: [email protected]
Signed-off-by: Paolo Abeni <[email protected]>
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

mptcp: drop the push_pending field

Such field is there to avoid acquiring the data lock in a few spots,
but it adds complexity to the already non trivial locking schema.

All the relevant call sites (mptcp-level re-injection, set socket
options), are slow-path, drop such field in favor of 'cb_flags', adding
the relevant locking.

This patch could be seen as an improvement, instead of a fix. But it
simplifies the next patch. The 'Fixes' tag has been added to help having
this series backported to stable.

Fixes: e9d09baca676 ("mptcp: avoid atomic bit manipulation when possible")
Cc: [email protected]
Signed-off-by: Paolo Abeni <[email protected]>
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

Merge branch 'net-misplaced-fields'

Eric Dumazet says:

====================
net: more three misplaced fields

We recently reorganized some structures for better data locality
in networking fast paths.

This series moves three fields that were not correctly classified.

There probably more to come.

Reference : https://lwn.net/Articles/951321/
====================

Signed-off-by: David S. Miller <[email protected]>

net-device: move lstats in net_device_read_txrx

dev->lstats is notably used from loopback ndo_start_xmit()
and other virtual drivers.

Per cpu stats updates are dirtying per-cpu data,
but the pointer itself is read-only.

Fixes: 43a71cd66b9c ("net-device: reorganize net_device fast path variables")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Coco Li <[email protected]>
Cc: Simon Horman <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

tcp: move tp->tcp_usec_ts to tcp_sock_read_txrx group

tp->tcp_usec_ts is a read mostly field, used in rx and tx fast paths.

Fixes: d5fed5addb2b ("tcp: reorganize tcp_sock fast path variables")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Coco Li <[email protected]>
Cc: Wei Wang <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

tcp: move tp->scaling_ratio to tcp_sock_read_txrx group

tp->scaling_ratio is a read mostly field, used in rx and tx fast paths.

Fixes: d5fed5addb2b ("tcp: reorganize tcp_sock fast path variables")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Coco Li <[email protected]>
Cc: Wei Wang <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

Merge branch 'tls-fixes'

Jakub Kicinski says:

====================
net: tls: fix some issues with async encryption

valis was reporting a race on socket close so I sat down to try to fix it.
I used Sabrina's async crypto debug patch to test... and in the process
run into some of the same issues, and created very similar fixes :(
I didn't realize how many of those patches weren't applied. Once I found
Sabrina's code [1] it turned out to be so similar in fact that I added
her S-o-b's and Co-develop'eds in a semi-haphazard way.

With this series in place all expected tests pass with async crypto.
Sabrina had a few more fixes, but I'll leave those to her, things are
not crashing anymore.

[1] https://lore.kernel.org/netdev/cover.1694018970[email protected]/
====================

Signed-off-by: David S. Miller <[email protected]>

net: tls: fix returned read length with async decrypt

We double count async, non-zc rx data. The previous fix was
lucky because if we fully zc async_copy_bytes is 0 so we add 0.
Decrypted already has all the bytes we handled, in all cases.
We don't have to adjust anything, delete the erroneous line.

Fixes: 4d42cd6bc2ac ("tls: rx: fix return value for async crypto")
Co-developed-by: Sabrina Dubroca <[email protected]>
Signed-off-by: Sabrina Dubroca <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

selftests: tls: use exact comparison in recv_partial

This exact case was fail for async crypto and we weren't
catching it.

Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

net: tls: fix use-after-free with partial reads and async decrypt

tls_decrypt_sg doesn't take a reference on the pages from clear_skb,
so the put_page() in tls_decrypt_done releases them, and we trigger
a use-after-free in process_rx_list when we try to read from the
partially-read skb.

Fixes: fd31f3996af2 ("tls: rx: decrypt into a fresh skb")
Signed-off-by: Sabrina Dubroca <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

net: tls: handle backlogging of crypto requests

Since we're setting the CRYPTO_TFM_REQ_MAY_BACKLOG flag on our
requests to the crypto API, crypto_aead_{encrypt,decrypt} can return
 -EBUSY instead of -EINPROGRESS in valid situations. For example, when
the cryptd queue for AESNI is full (easy to trigger with an
artificially low cryptd.cryptd_max_cpu_qlen), requests will be enqueued
to the backlog but still processed. In that case, the async callback
will also be called twice: first with err == -EINPROGRESS, which it
seems we can just ignore, then with err == 0.

Compared to Sabrina's original patch this version uses the new
tls_*crypt_async_wait() helpers and converts the EBUSY to
EINPROGRESS to avoid having to modify all the error handling
paths. The handling is identical.

Fixes: a54667f6728c ("tls: Add support for encryption using async offload accelerator")
Fixes: 94524d8fc965 ("net/tls: Add support for async decryption of tls records")
Co-developed-by: Sabrina Dubroca <[email protected]>
Signed-off-by: Sabrina Dubroca <[email protected]>
Link: https://lore.kernel.org/netdev/9681d1febfec295449a62300938ed2ae66983f28.1694018970.git.sd@queasysnail.net/
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

tls: fix race between tx work scheduling and socket close

Similarly to previous commit, the submitting thread (recvmsg/sendmsg)
may exit as soon as the async crypto handler calls complete().
Reorder scheduling the work before calling complete().
This seems more logical in the first place, as it's
the inverse order of what the submitting thread will do.

Reported-by: valis <[email protected]>
Fixes: a42055e8d2c3 ("net/tls: Add support for async encryption of records for performance")
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Sabrina Dubroca <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

tls: fix race between async notify and socket close

The submitting thread (one which called recvmsg/sendmsg)
may exit as soon as the async crypto handler calls complete()
so any code past that point risks touching already freed data.

Try to avoid the locking and extra flags altogether.
Have the main thread hold an extra reference, this way
we can depend solely on the atomic ref counter for
synchronization.

Don't futz with reiniting the completion, either, we are now
tightly controlling when completion fires.

Reported-by: valis <[email protected]>
Fixes: 0cada33241d9 ("net/tls: fix race condition causing kernel panic")
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Reviewed-by: Sabrina Dubroca <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

net: tls: factor out tls_*crypt_async_wait()

Factor out waiting for async encrypt and decrypt to finish.
There are already multiple copies and a subsequent fix will
need more. No functional changes.

Note that crypto_wait_req() returns wait->err

Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Sabrina Dubroca <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

Merge branch 'net-fix-module_description-for-net-p5'

Breno Leitao says:

====================
net: Fix MODULE_DESCRIPTION() for net (p5)

There are hundreds of network modules that misses MODULE_DESCRIPTION(),
causing a warning when compiling with W=1. Example:

WARNING: modpost: missing MODULE_DESCRIPTION() in net/sched/em_cmp.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/sched/em_nbyte.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/sched/em_u32.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/sched/em_meta.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/sched/em_text.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/sched/em_canid.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/ip_tunnel.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/ipip.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/ip_gre.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/udp_tunnel.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/ip_vti.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/ah4.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/esp4.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/xfrm4_tunnel.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/tunnel4.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/xfrm/xfrm_algo.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/xfrm/xfrm_user.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv6/ah6.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv6/esp6.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv6/xfrm6_tunnel.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv6/tunnel6.o

This part5 of the patchset focus on the missing net/ module, which
are now warning free.

v1: https://lore.kernel.org/all/20240205101400.1480521[email protected]/
v2: https://lore.kernel.org/all/20240207101929[email protected]/
====================

Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

net: fill in MODULE_DESCRIPTION()s for dsa_loop_bdinfo

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the DSA loopback fixed PHY module.

Suggested-by: Florian Fainelli <[email protected]>
Signed-off-by: Breno Leitao <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

net: fill in MODULE_DESCRIPTION()s for ipvtap

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the IP-VLAN based tap driver.

Signed-off-by: Breno Leitao <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

net: fill in MODULE_DESCRIPTION()s for net/sched

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the network schedulers.

Suggested-by: Jamal Hadi Salim <[email protected]>
Signed-off-by: Breno Leitao <[email protected]>
Reviewed-by: Jamal Hadi Salim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

net: fill in MODULE_DESCRIPTION()s for ipv4 modules

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the IPv4 modules.

Signed-off-by: Breno Leitao <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

net: fill in MODULE_DESCRIPTION()s for ipv6 modules

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the IPv6 modules.

Signed-off-by: Breno Leitao <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

net: fill in MODULE_DESCRIPTION()s for 6LoWPAN

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to IPv6 over Low power Wireless Personal Area Network.

Signed-off-by: Breno Leitao <[email protected]>
Acked-by: Alexander Aring <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

net: fill in MODULE_DESCRIPTION()s for af_key

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the PF_KEY socket helpers.

Signed-off-by: Breno Leitao <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

net: fill in MODULE_DESCRIPTION()s for mpoa

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the Multi-Protocol Over ATM (MPOA) driver.

Signed-off-by: Breno Leitao <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

net: fill in MODULE_DESCRIPTION()s for xfrm

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the XFRM interface drivers.

Signed-off-by: Breno Leitao <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

lan966x: Fix crash when adding interface under a lag

There is a crash when adding one of the lan966x interfaces under a lag
interface. The issue can be reproduced like this:
ip link add name bond0 type bond miimon 100 mode balance-xor
ip link set dev eth0 master bond0

The reason is because when adding a interface under the lag it would go
through all the ports and try to figure out which other ports are under
that lag interface. And the issue is that lan966x can have ports that are
NULL pointer as they are not probed. So then iterating over these ports
it would just crash as they are NULL pointers.
The fix consists in actually checking for NULL pointers before accessing
something from the ports. Like we do in other places.

Fixes: cabc9d49333d ("net: lan966x: Add lag support for lan966x")
Signed-off-by: Horatiu Vultur <[email protected]>
Reviewed-by: Michal Swiatkowski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

net/sched: act_mirred: Don't zero blockid when net device is being deleted

While testing tdc with parallel tests for mirred to block we caught an
intermittent bug. The blockid was being zeroed out when a net device
was deleted and, thus, giving us an incorrect blockid value whenever
we tried to dump the mirred action. Since we don't increment the block
refcount in the control path (and only use the ID), we don't need to
zero the blockid field whenever a net device is going down.

Fixes: 42f39036cda8 ("net/sched: act_mirred: Allow mirred to block")
Signed-off-by: Victor Nogueira <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Acked-by: Jamal Hadi Salim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

Merge branch 'net-openvswitch-limit-the-recursions-from-action-sets'

Aaron Conole says:

====================
net: openvswitch: limit the recursions from action sets

Open vSwitch module accepts actions as a list from the netlink socket
and then creates a copy which it uses in the action set processing.
During processing of the action list on a packet, the module keeps a
count of the execution depth and exits processing if the action depth
goes too high.

However, during netlink processing the recursion depth isn't checked
anywhere, and the copy trusts that kernel has large enough stack to
accommodate it.  The OVS sample action was the original action which
could perform this kinds of recursion, and it originally checked that
it didn't exceed the sample depth limit.  However, when sample became
optimized to provide the clone() semantics, the recursion limit was
dropped.

This series adds a depth limit during the __ovs_nla_copy_actions() call
that will ensure we don't exceed the max that the OVS userspace could
generate for a clone().

Additionally, this series provides a selftest in 2/2 that can be used to
determine if the OVS module is allowing unbounded access.  It can be
safely omitted where the ovs selftest framework isn't available.
====================

Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

selftests: openvswitch: Add validation for the recursion test

Add a test case into the netlink checks that will show the number of
nested action recursions won't exceed 16.  Going to 17 on a small
clone call isn't enough to exhaust the stack on (most) systems, so
it should be safe to run even on systems that don't have the fix
applied.

Signed-off-by: Aaron Conole <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

net: openvswitch: limit the number of recursions from action sets

The ovs module allows for some actions to recursively contain an action
list for complex scenarios, such as sampling, checking lengths, etc.
When these actions are copied into the internal flow table, they are
evaluated to validate that such actions make sense, and these calls
happen recursively.

The ovs-vswitchd userspace won't emit more than 16 recursion levels
deep.  However, the module has no such limit and will happily accept
limits larger than 16 levels nested.  Prevent this by tracking the
number of recursions happening and manually limiting it to 16 levels
nested.

The initial implementation of the sample action would track this depth
and prevent more than 3 levels of recursion, but this was removed to
support the clone use case, rather than limited at the current userspace
limit.

Fixes: 798c166173ff ("openvswitch: Optimize sample action for the clone use cases")
Signed-off-by: Aaron Conole <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

Merge branch 'selftests-forwarding-various-fixes'

Ido Schimmel says:

====================
selftests: forwarding: Various fixes

Fix various problems in the forwarding selftests so that they will pass
in the netdev CI instead of being ignored. See commit messages for
details.
====================

Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

selftests: forwarding: Fix bridge locked port test flakiness

The redirection test case fails in the netdev CI on debug kernels
because an FDB entry is learned despite the presence of a tc filter that
redirects incoming traffic [1].

I am unable to reproduce the failure locally, but I can see how it can
happen given that learning is first enabled and only then the ingress tc
filter is configured. On debug kernels the time window between these two
operations is longer compared to regular kernels, allowing random
packets to be transmitted and trigger learning.

Fix by reversing the order and configure the ingress tc filter before
enabling learning.

[1]
[...]
 # TEST: Locked port MAB redirect                                      [FAIL]
 # Locked entry created for redirected traffic

Fixes: 38c43a1ce758 ("selftests: forwarding: Add test case for traffic redirection from a locked port")
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Hangbin Liu <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

selftests: forwarding: Suppress grep warnings

Suppress the following grep warnings:

[...]
INFO: # Port group entries configuration tests - (*, G)
TEST: Common port group entries configuration tests (IPv4 (*, G))   [ OK ]
TEST: Common port group entries configuration tests (IPv6 (*, G))   [ OK ]
grep: warning: stray \ before /
grep: warning: stray \ before /
grep: warning: stray \ before /
TEST: IPv4 (*, G) port group entries configuration tests            [ OK ]
grep: warning: stray \ before /
grep: warning: stray \ before /
grep: warning: stray \ before /
TEST: IPv6 (*, G) port group entries configuration tests            [ OK ]
[...]

They do not fail the test, but do clutter the output.

Fixes: b6d00da08610 ("selftests: forwarding: Add bridge MDB test")
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Hangbin Liu <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

selftests: forwarding: Fix bridge MDB test flakiness

After enabling a multicast querier on the bridge (like the test is
doing), the bridge will wait for the Max Response Delay before starting
to forward according to its MDB in order to let Membership Reports
enough time to be received and processed.

Currently, the test is waiting for exactly the default Max Response
Delay (10 seconds) which is racy and leads to failures [1].

Fix by reducing the Max Response Delay to 1 second.

[1]
 [...]
 # TEST: IPv4 host entries forwarding tests                            [FAIL]
 # Packet locally received after flood

Fixes: b6d00da08610 ("selftests: forwarding: Add bridge MDB test")
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Hangbin Liu <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

selftests: forwarding: Fix layer 2 miss test flakiness

After enabling a multicast querier on the bridge (like the test is
doing), the bridge will wait for the Max Response Delay before starting
to forward according to its MDB in order to let Membership Reports
enough time to be received and processed.

Currently, the test is waiting for exactly the default Max Response
Delay (10 seconds) which is racy and leads to failures [1].

Fix by reducing the Max Response Delay to 1 second.

[1]
 [...]
 # TEST: L2 miss - Multicast (IPv4)                                    [FAIL]
 # Unregistered multicast filter was hit after adding MDB entry

Fixes: 8c33266ae26a ("selftests: forwarding: Add layer 2 miss test cases")
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Hangbin Liu <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

selftests: net: Fix bridge backup port test flakiness

The test toggles the carrier of a bridge port in order to test the
bridge backup port feature.

Due to the linkwatch delayed work the carrier change is not always
reflected fast enough to the bridge driver and packets are not forwarded
as the test expects, resulting in failures [1].

Fix by busy waiting on the bridge port state until it changes to the
desired state following the carrier change.

[1]
 # Backup port
 # -----------
 [...]
 # TEST: swp1 carrier off                                              [ OK ]
 # TEST: No forwarding out of swp1                                     [FAIL]
 [  641.995910] br0: port 1(swp1) entered disabled state
 # TEST: No forwarding out of vx0                                      [ OK ]

Fixes: b408453053fb ("selftests: net: Add bridge backup port and backup nexthop ID test")
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Petr Machata <[email protected]>
Acked-by: Paolo Abeni <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

selftests: net: add more missing kernel config

The reuseport_addr_any.sh is currently skipping DCCP tests and
pmtu.sh is skipping all the FOU/GUE related cases: add the missing
options.

Signed-off-by: Paolo Abeni <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/38d3ca7f909736c1aef56e6244d67c82a9bba6ff.1707326987.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <[email protected]>

devlink: Fix command annotation documentation

Command example string is not read as command.
Fix command annotation.

Fixes: a8ce7b26a51e ("devlink: Expose port function commands to control migratable")
Signed-off-by: Parav Pandit <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

bonding: do not report NETDEV_XDP_ACT_XSK_ZEROCOPY

Do not report the XDP capability NETDEV_XDP_ACT_XSK_ZEROCOPY as the
bonding driver does not support XDP and AF_XDP in zero-copy mode even
if the real NIC drivers do.

Note that the driver used to report everything as supported before a
device was bonded. Instead of just masking out the zero-copy support
from this, have the driver report that no XDP feature is supported
until a real device is bonded. This seems to be more truthful as it is
the real drivers that decide what XDP features are supported.

Fixes: cb9e6e584d58 ("bonding: add xdp_features support")
Reported-by: Prashant Batra <[email protected]>
Link: https://lore.kernel.org/all/CAJ8uoz2ieZCopgqTvQ9ZY6xQgTbujmC6XkMTamhp68O-h_-rLg@mail.gmail.com/T/
Signed-off-by: Magnus Karlsson <[email protected]>
Reviewed-by: Toke Høiland-Jørgensen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

net/handshake: Fix handshake_req_destroy_test1

Recently, handshake_req_destroy_test1 started failing:

Expected handshake_req_destroy_test == req, but
    handshake_req_destroy_test == 0000000000000000
    req == 0000000060f99b40
not ok 11 req_destroy works

This is because "sock_release(sock)" was replaced with "fput(filp)"
to address a memory leak. Note that sock_release() is synchronous
but fput() usually delays the final close and clean-up.

The delay is not consequential in the other cases that were changed
but handshake_req_destroy_test1 is testing that handshake_req_cancel()
followed by closing the file actually does call the ->hp_destroy
method. Thus the PTR_EQ test at the end has to be sure that the
final close is complete before it checks the pointer.

We cannot use a completion here because if ->hp_destroy is never
called (ie, there is an API bug) then the test will hang.

Reported by: Guenter Roeck <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/T/#mac5c6299f86799f1c71776f3a07f9c566c7c3c40
Fixes: 4a0f07d71b04 ("net/handshake: Fix memory leak in __sock_create() and sock_alloc_file()")
Signed-off-by: Chuck Lever <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Link: https://lore.kernel.org/r/170724699027.91401.7839730697326806733.stgit@oracle-102.nfsv4bat.org
Signed-off-by: Jakub Kicinski <[email protected]>

net/mlx5: DPLL, Fix possible use after free after delayed work timer triggers

I managed to hit following use after free warning recently:

[ 2169.711665] ==================================================================
[ 2169.714009] BUG: KASAN: slab-use-after-free in __run_timers.part.0+0x179/0x4c0
[ 2169.716293] Write of size 8 at addr ffff88812b326a70 by task swapper/4/0

[ 2169.719022] CPU: 4 PID: 0 Comm: swapper/4 Not tainted 6.8.0-rc2jiri+ #2
[ 2169.720974] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 2169.722457] Call Trace:
[ 2169.722756]  <IRQ>
[ 2169.723024]  dump_stack_lvl+0x58/0xb0
[ 2169.723417]  print_report+0xc5/0x630
[ 2169.723807]  ? __virt_addr_valid+0x126/0x2b0
[ 2169.724268]  kasan_report+0xbe/0xf0
[ 2169.724667]  ? __run_timers.part.0+0x179/0x4c0
[ 2169.725116]  ? __run_timers.part.0+0x179/0x4c0
[ 2169.725570]  __run_timers.part.0+0x179/0x4c0
[ 2169.726003]  ? call_timer_fn+0x320/0x320
[ 2169.726404]  ? lock_downgrade+0x3a0/0x3a0
[ 2169.726820]  ? kvm_clock_get_cycles+0x14/0x20
[ 2169.727257]  ? ktime_get+0x92/0x150
[ 2169.727630]  ? lapic_next_deadline+0x35/0x60
[ 2169.728069]  run_timer_softirq+0x40/0x80
[ 2169.728475]  __do_softirq+0x1a1/0x509
[ 2169.728866]  irq_exit_rcu+0x95/0xc0
[ 2169.729241]  sysvec_apic_timer_interrupt+0x6b/0x80
[ 2169.729718]  </IRQ>
[ 2169.729993]  <TASK>
[ 2169.730259]  asm_sysvec_apic_timer_interrupt+0x16/0x20
[ 2169.730755] RIP: 0010:default_idle+0x13/0x20
[ 2169.731190] Code: c0 08 00 00 00 4d 29 c8 4c 01 c7 4c 29 c2 e9 72 ff ff ff cc cc cc cc 8b 05 9a 7f 1f 02 85 c0 7e 07 0f 00 2d cf 69 43 00 fb f4 <fa> c3 66 66 2e 0f 1f 84 00 00 00 00 00 65 48 8b 04 25 c0 93 04 00
[ 2169.732759] RSP: 0018:ffff888100dbfe10 EFLAGS: 00000242
[ 2169.733264] RAX: 0000000000000001 RBX: ffff888100d9c200 RCX: ffffffff8241bd62
[ 2169.733925] RDX: ffffed109a848b15 RSI: 0000000000000004 RDI: ffffffff8127ac55
[ 2169.734566] RBP: 0000000000000004 R08: 0000000000000000 R09: ffffed109a848b14
[ 2169.735200] R10: ffff8884d42458a3 R11: 000000000000ba7e R12: ffffffff83d7d3a0
[ 2169.735835] R13: 1ffff110201b7fc6 R14: 0000000000000000 R15: ffff888100d9c200
[ 2169.736478]  ? ct_kernel_exit.constprop.0+0xa2/0xc0
[ 2169.736954]  ? do_idle+0x285/0x290
[ 2169.737323]  default_idle_call+0x63/0x90
[ 2169.737730]  do_idle+0x285/0x290
[ 2169.738089]  ? arch_cpu_idle_exit+0x30/0x30
[ 2169.738511]  ? mark_held_locks+0x1a/0x80
[ 2169.738917]  ? lockdep_hardirqs_on_prepare+0x12e/0x200
[ 2169.739417]  cpu_startup_entry+0x30/0x40
[ 2169.739825]  start_secondary+0x19a/0x1c0
[ 2169.740229]  ? set_cpu_sibling_map+0xbd0/0xbd0
[ 2169.740673]  secondary_startup_64_no_verify+0x15d/0x16b
[ 2169.741179]  </TASK>

[ 2169.741686] Allocated by task 1098:
[ 2169.742058]  kasan_save_stack+0x1c/0x40
[ 2169.742456]  kasan_save_track+0x10/0x30
[ 2169.742852]  __kasan_kmalloc+0x83/0x90
[ 2169.743246]  mlx5_dpll_probe+0xf5/0x3c0 [mlx5_dpll]
[ 2169.743730]  auxiliary_bus_probe+0x62/0xb0
[ 2169.744148]  really_probe+0x127/0x590
[ 2169.744534]  __driver_probe_device+0xd2/0x200
[ 2169.744973]  device_driver_attach+0x6b/0xf0
[ 2169.745402]  bind_store+0x90/0xe0
[ 2169.745761]  kernfs_fop_write_iter+0x1df/0x2a0
[ 2169.746210]  vfs_write+0x41f/0x790
[ 2169.746579]  ksys_write+0xc7/0x160
[ 2169.746947]  do_syscall_64+0x6f/0x140
[ 2169.747333]  entry_SYSCALL_64_after_hwframe+0x46/0x4e

[ 2169.748049] Freed by task 1220:
[ 2169.748393]  kasan_save_stack+0x1c/0x40
[ 2169.748789]  kasan_save_track+0x10/0x30
[ 2169.749188]  kasan_save_free_info+0x3b/0x50
[ 2169.749621]  poison_slab_object+0x106/0x180
[ 2169.750044]  __kasan_slab_free+0x14/0x50
[ 2169.750451]  kfree+0x118/0x330
[ 2169.750792]  mlx5_dpll_remove+0xf5/0x110 [mlx5_dpll]
[ 2169.751271]  auxiliary_bus_remove+0x2e/0x40
[ 2169.751694]  device_release_driver_internal+0x24b/0x2e0
[ 2169.752191]  unbind_store+0xa6/0xb0
[ 2169.752563]  kernfs_fop_write_iter+0x1df/0x2a0
[ 2169.753004]  vfs_write+0x41f/0x790
[ 2169.753381]  ksys_write+0xc7/0x160
[ 2169.753750]  do_syscall_64+0x6f/0x140
[ 2169.754132]  entry_SYSCALL_64_after_hwframe+0x46/0x4e

[ 2169.754847] Last potentially related work creation:
[ 2169.755315]  kasan_save_stack+0x1c/0x40
[ 2169.755709]  __kasan_record_aux_stack+0x9b/0xf0
[ 2169.756165]  __queue_work+0x382/0x8f0
[ 2169.756552]  call_timer_fn+0x126/0x320
[ 2169.756941]  __run_timers.part.0+0x2ea/0x4c0
[ 2169.757376]  run_timer_softirq+0x40/0x80
[ 2169.757782]  __do_softirq+0x1a1/0x509

[ 2169.758387] Second to last potentially related work creation:
[ 2169.758924]  kasan_save_stack+0x1c/0x40
[ 2169.759322]  __kasan_record_aux_stack+0x9b/0xf0
[ 2169.759773]  __queue_work+0x382/0x8f0
[ 2169.760156]  call_timer_fn+0x126/0x320
[ 2169.760550]  __run_timers.part.0+0x2ea/0x4c0
[ 2169.760978]  run_timer_softirq+0x40/0x80
[ 2169.761381]  __do_softirq+0x1a1/0x509

[ 2169.761998] The buggy address belongs to the object at ffff88812b326a00
                which belongs to the cache kmalloc-256 of size 256
[ 2169.763061] The buggy address is located 112 bytes inside of
                freed 256-byte region [ffff88812b326a00, ffff88812b326b00)

[ 2169.764346] The buggy address belongs to the physical page:
[ 2169.764866] page:000000000f2b1e89 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x12b324
[ 2169.765731] head:000000000f2b1e89 order:2 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 2169.766484] anon flags: 0x200000000000840(slab|head|node=0|zone=2)
[ 2169.767048] page_type: 0xffffffff()
[ 2169.767422] raw: 0200000000000840 ffff888100042b40 0000000000000000 dead000000000001
[ 2169.768183] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
[ 2169.768899] page dumped because: kasan: bad access detected

[ 2169.769649] Memory state around the buggy address:
[ 2169.770116]  ffff88812b326900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 2169.770805]  ffff88812b326980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 2169.771485] >ffff88812b326a00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2169.772173]                                                              ^
[ 2169.772787]  ffff88812b326a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2169.773477]  ffff88812b326b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 2169.774160] ==================================================================
[ 2169.774845] ==================================================================

I didn't manage to reproduce it. Though the issue seems to be obvious.
There is a chance that the mlx5_dpll_remove() calls
cancel_delayed_work() when the work runs and manages to re-arm itself.
In that case, after delay timer triggers next attempt to queue it,
it works with freed memory.

Fix this by using cancel_delayed_work_sync() instead which makes sure
that work is done when it returns.

Fixes: 496fd0a26bbf ("mlx5: Implement SyncE support using DPLL infrastructure")
Signed-off-by: Jiri Pirko <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

dpll: fix possible deadlock during netlink dump operation

Recently, I've been hitting following deadlock warning during dpll pin
dump:

[52804.637962] ======================================================
[52804.638536] WARNING: possible circular locking dependency detected
[52804.639111] 6.8.0-rc2jiri+ #1 Not tainted
[52804.639529] ------------------------------------------------------
[52804.640104] python3/2984 is trying to acquire lock:
[52804.640581] ffff88810e642678 (nlk_cb_mutex-GENERIC){+.+.}-{3:3}, at: netlink_dump+0xb3/0x780
[52804.641417]
               but task is already holding lock:
[52804.642010] ffffffff83bde4c8 (dpll_lock){+.+.}-{3:3}, at: dpll_lock_dumpit+0x13/0x20
[52804.642747]
               which lock already depends on the new lock.

[52804.643551]
               the existing dependency chain (in reverse order) is:
[52804.644259]
               -> #1 (dpll_lock){+.+.}-{3:3}:
[52804.644836]        lock_acquire+0x174/0x3e0
[52804.645271]        __mutex_lock+0x119/0x1150
[52804.645723]        dpll_lock_dumpit+0x13/0x20
[52804.646169]        genl_start+0x266/0x320
[52804.646578]        __netlink_dump_start+0x321/0x450
[52804.647056]        genl_family_rcv_msg_dumpit+0x155/0x1e0
[52804.647575]        genl_rcv_msg+0x1ed/0x3b0
[52804.648001]        netlink_rcv_skb+0xdc/0x210
[52804.648440]        genl_rcv+0x24/0x40
[52804.648831]        netlink_unicast+0x2f1/0x490
[52804.649290]        netlink_sendmsg+0x36d/0x660
[52804.649742]        __sock_sendmsg+0x73/0xc0
[52804.650165]        __sys_sendto+0x184/0x210
[52804.650597]        __x64_sys_sendto+0x72/0x80
[52804.651045]        do_syscall_64+0x6f/0x140
[52804.651474]        entry_SYSCALL_64_after_hwframe+0x46/0x4e
[52804.652001]
               -> #0 (nlk_cb_mutex-GENERIC){+.+.}-{3:3}:
[52804.652650]        check_prev_add+0x1ae/0x1280
[52804.653107]        __lock_acquire+0x1ed3/0x29a0
[52804.653559]        lock_acquire+0x174/0x3e0
[52804.653984]        __mutex_lock+0x119/0x1150
[52804.654423]        netlink_dump+0xb3/0x780
[52804.654845]        __netlink_dump_start+0x389/0x450
[52804.655321]        genl_family_rcv_msg_dumpit+0x155/0x1e0
[52804.655842]        genl_rcv_msg+0x1ed/0x3b0
[52804.656272]        netlink_rcv_skb+0xdc/0x210
[52804.656721]        genl_rcv+0x24/0x40
[52804.657119]        netlink_unicast+0x2f1/0x490
[52804.657570]        netlink_sendmsg+0x36d/0x660
[52804.658022]        __sock_sendmsg+0x73/0xc0
[52804.658450]        __sys_sendto+0x184/0x210
[52804.658877]        __x64_sys_sendto+0x72/0x80
[52804.659322]        do_syscall_64+0x6f/0x140
[52804.659752]        entry_SYSCALL_64_after_hwframe+0x46/0x4e
[52804.660281]
               other info that might help us debug this:

[52804.661077]  Possible unsafe locking scenario:

[52804.661671]        CPU0                    CPU1
[52804.662129]        ----                    ----
[52804.662577]   lock(dpll_lock);
[52804.662924]                                lock(nlk_cb_mutex-GENERIC);
[52804.663538]                                lock(dpll_lock);
[52804.664073]   lock(nlk_cb_mutex-GENERIC);
[52804.664490]

The issue as follows: __netlink_dump_start() calls control->start(cb)
with nlk->cb_mutex held. In control->start(cb) the dpll_lock is taken.
Then nlk->cb_mutex is released and taken again in netlink_dump(), while
dpll_lock still being held. That leads to ABBA deadlock when another
CPU races with the same operation.

Fix this by moving dpll_lock taking into dumpit() callback which ensures
correct lock taking order.

Fixes: 9d71b54b65b1 ("dpll: netlink: Add DPLL framework base functions")
Signed-off-by: Jiri Pirko <[email protected]>
Reviewed-by: Arkadiusz Kubalewski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

Merge tag 'net-6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
 "Including fixes from WiFi and netfilter.

  Current release - regressions:

   - nic: intel: fix old compiler regressions

   - netfilter: ipset: missing gc cancellations fixed

  Current release - new code bugs:

   - netfilter: ctnetlink: fix filtering for zone 0

  Previous releases - regressions:

   - core: fix from address in memcpy_to_iter_csum()

   - netfilter: nfnetlink_queue: un-break NF_REPEAT

   - af_unix: fix memory leak for dead unix_(sk)->oob_skb in GC.

   - devlink: avoid potential loop in devlink_rel_nested_in_notify_work()

   - iwlwifi:
       - mvm: fix a battery life regression
       - fix double-free bug

   - mac80211: fix waiting for beacons logic

   - nic: nfp: flower: prevent re-adding mac index for bonded port

  Previous releases - always broken:

   - rxrpc: fix generation of serial numbers to skip zero

   - tipc: check the bearer type before calling tipc_udp_nl_bearer_add()

   - tunnels: fix out of bounds access when building IPv6 PMTU error

   - nic: hv_netvsc: register VF in netvsc_probe if NET_DEVICE_REGISTER
     missed

   - nic: atlantic: fix DMA mapping for PTP hwts ring

  Misc:

   - selftests: more fixes to deal with very slow hosts"

* tag 'net-6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (80 commits)
  netfilter: nft_set_pipapo: remove scratch_aligned pointer
  netfilter: nft_set_pipapo: add helper to release pcpu scratch area
  netfilter: nft_set_pipapo: store index in scratch maps
  netfilter: nft_set_rbtree: skip end interval element from gc
  netfilter: nfnetlink_queue: un-break NF_REPEAT
  netfilter: nf_tables: use timestamp to check for set element timeout
  netfilter: nft_ct: reject direction for ct id
  netfilter: ctnetlink: fix filtering for zone 0
  s390/qeth: Fix potential loss of L3-IP@ in case of network issues
  netfilter: ipset: Missing gc cancellations fixed
  octeontx2-af: Initialize maps.
  net: ethernet: ti: cpsw: enable mac_managed_pm to fix mdio
  net: ethernet: ti: cpsw_new: enable mac_managed_pm to fix mdio
  netfilter: nft_set_pipapo: remove static in nft_pipapo_get()
  netfilter: nft_compat: restrict match/target protocol to u16
  netfilter: nft_compat: reject unused compat flag
  netfilter: nft_compat: narrow down revision to unsigned 8-bits
  net: intel: fix old compiler regressions
  MAINTAINERS: Maintainer change for rds
  selftests: cmsg_ipv6: repeat the exact packet
  ...

Merge tag 'pinctrl-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pinctrl fix from Linus Walleij:
 "A single fix for the AMD driver which affects developer laptops, the
  pinctrl/GPIO driver won't probe on some systems"

* tag 'pinctrl-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: amd: Add IRQF_ONESHOT to the interrupt request

Merge tag 'nf-24-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Narrow down target/match revision to u8 in nft_compat.

2) Bail out with unused flags in nft_compat.

3) Restrict layer 4 protocol to u16 in nft_compat.

4) Remove static in pipapo get command that slipped through when
   reducing set memory footprint.

5) Follow up incremental fix for the ipset performance regression,
   this includes the missing gc cancellation, from Jozsef Kadlecsik.

6) Allow to filter by zone 0 in ctnetlink, do not interpret zone 0
   as no filtering, from Felix Huettner.

7) Reject direction for NFT_CT_ID.

8) Use timestamp to check for set element expiration while transaction
   is handled to prevent garbage collection from removing set elements
   that were just added by this transaction. Packet path and netlink
   dump/get path still use current time to check for expiration.

9) Restore NF_REPEAT in nfnetlink_queue, from Florian Westphal.

10) map_index needs to be percpu and per-set, not just percpu.
    At this time its possible for a pipapo set to fill the all-zero part
    with ones and take the 'might have bits set' as 'start-from-zero' area.
    From Florian Westphal. This includes three patches:

    - Change scratchpad area to a structure that provides space for a
      per-set-and-cpu toggle and uses it of the percpu one.

    - Add a new free helper to prepare for the next patch.

    - Remove the scratch_aligned pointer and makes AVX2 implementation
      use the exact same memory addresses for read/store of the matching
      state.

netfilter pull request 24-02-08

* tag 'nf-24-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nft_set_pipapo: remove scratch_aligned pointer
  netfilter: nft_set_pipapo: add helper to release pcpu scratch area
  netfilter: nft_set_pipapo: store index in scratch maps
  netfilter: nft_set_rbtree: skip end interval element from gc
  netfilter: nfnetlink_queue: un-break NF_REPEAT
  netfilter: nf_tables: use timestamp to check for set element timeout
  netfilter: nft_ct: reject direction for ct id
  netfilter: ctnetlink: fix filtering for zone 0
  netfilter: ipset: Missing gc cancellations fixed
  netfilter: nft_set_pipapo: remove static in nft_pipapo_get()
  netfilter: nft_compat: restrict match/target protocol to u16
  netfilter: nft_compat: reject unused compat flag
  netfilter: nft_compat: narrow down revision to unsigned 8-bits
====================

Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>

netfilter: nft_set_pipapo: remove scratch_aligned pointer

use ->scratch for both avx2 and the generic implementation.

After previous change the scratch->map member is always aligned properly
for AVX2, so we can just use scratch->map in AVX2 too.

The alignoff delta is stored in the scratchpad so we can reconstruct
the correct address to free the area again.

Fixes: 7400b063969b ("nft_set_pipapo: Introduce AVX2-based lookup implementation")
Reviewed-by: Stefano Brivio <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>

netfilter: nft_set_pipapo: add helper to release pcpu scratch area

After next patch simple kfree() is not enough anymore, so add
a helper for it.

Reviewed-by: Stefano Brivio <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>

netfilter: nft_set_pipapo: store index in scratch maps

Pipapo needs a scratchpad area to keep state during matching.
This state can be large and thus cannot reside on stack.

Each set preallocates percpu areas for this.

On each match stage, one scratchpad half starts with all-zero and the other
is inited to all-ones.

At the end of each stage, the half that starts with all-ones is
always zero.  Before next field is tested, pointers to the two halves
are swapped, i.e.  resmap pointer turns into fill pointer and vice versa.

After the last field has been processed, pipapo stashes the
index toggle in a percpu variable, with assumption that next packet
will start with the all-zero half and sets all bits in the other to 1.

This isn't reliable.

There can be multiple sets and we can't be sure that the upper
and lower half of all set scratch map is always in sync (lookups
can be conditional), so one set might have swapped, but other might
not have been queried.

Thus we need to keep the index per-set-and-cpu, just like the
scratchpad.

Note that this bug fix is incomplete, there is a related issue.

avx2 and normal implementation might use slightly different areas of the
map array space due to the avx2 alignment requirements, so
m->scratch (generic/fallback implementation) and ->scratch_aligned
(avx) may partially overlap. scratch and scratch_aligned are not distinct
objects, the latter is just the aligned address of the former.

After this change, write to scratch_align->map_index may write to
scratch->map, so this issue becomes more prominent, we can set to 1
a bit in the supposedly-all-zero area of scratch->map[].

A followup patch will remove the scratch_aligned and makes generic and
avx code use the same (aligned) area.

Its done in a separate change to ease review.

Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Reviewed-by: Stefano Brivio <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>

netfilter: nft_set_rbtree: skip end interval element from gc

rbtree lazy gc on insert might collect an end interval element that has
been just added in this transactions, skip end interval elements that
are not yet active.

Fixes: f718863aca46 ("netfilter: nft_set_rbtree: fix overlap expiration walk")
Cc: [email protected]
Reported-by: lonial con <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>

netfilter: nfnetlink_queue: un-break NF_REPEAT

Only override userspace verdict if the ct hook returns something
other than ACCEPT.

Else, this replaces NF_REPEAT (run all hooks again) with NF_ACCEPT
(move to next hook).

Fixes: 6291b3a67ad5 ("netfilter: conntrack: convert nf_conntrack_update to netfilter verdicts")
Reported-by: [email protected]
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>

netfilter: nf_tables: use timestamp to check for set element timeout

Add a timestamp field at the beginning of the transaction, store it
in the nftables per-netns area.

Update set backend .insert, .deactivate and sync gc path to use the
timestamp, this avoids that an element expires while control plane
transaction is still unfinished.

.lookup and .update, which are used from packet path, still use the
current time to check if the element has expired. And .get path and dump
also since this runs lockless under rcu read size lock. Then, there is
async gc which also needs to check the current time since it runs
asynchronously from a workqueue.

Fixes: c3e1b005ed1c ("netfilter: nf_tables: add set element timeout support")
Signed-off-by: Pablo Neira Ayuso <[email protected]>

netfilter: nft_ct: reject direction for ct id

Direction attribute is ignored, reject it in case this ever needs to be
supported

Fixes: 3087c3f7c23b ("netfilter: nft_ct: Add ct id support")
Signed-off-by: Pablo Neira Ayuso <[email protected]>

netfilter: ctnetlink: fix filtering for zone 0

previously filtering for the default zone would actually skip the zone
filter and flush all zones.

Fixes: eff3c558bb7e ("netfilter: ctnetlink: support filtering by zone")
Reported-by: Ilya Maximets <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: Felix Huettner <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>

s390/qeth: Fix potential loss of L3-IP@ in case of network issues

Symptom:
In case of a bad cable connection (e.g. dirty optics) a fast sequence of
network DOWN-UP-DOWN-UP could happen. UP triggers recovery of the qeth
interface. In case of a second DOWN while recovery is still ongoing, it
can happen that the IP@ of a Layer3 qeth interface is lost and will not
be recovered by the second UP.

Problem:
When registration of IP addresses with Layer 3 qeth devices fails, (e.g.
because of bad address format) the respective IP address is deleted from
its hash-table in the driver. If registration fails because of a ENETDOWN
condition, the address should stay in the hashtable, so a subsequent
recovery can restore it.

3caa4af834df ("qeth: keep ip-address after LAN_OFFLINE failure")
fixes this for registration failures during normal operation, but not
during recovery.

Solution:
Keep L3-IP address in case of ENETDOWN in qeth_l3_recover_ip(). For
consistency with qeth_l3_add_ip() we also keep it in case of EADDRINUSE,
i.e. for some reason the card already/still has this address registered.

Fixes: 4a71df50047f ("qeth: new qeth device driver")
Cc: [email protected]
Signed-off-by: Alexandra Winter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>

netfilter: ipset: Missing gc cancellations fixed

The patch fdb8e12cc2cc ("netfilter: ipset: fix performance regression
in swap operation") missed to add the calls to gc cancellations
at the error path of create operations and at module unload. Also,
because the half of the destroy operations now executed by a
function registered by call_rcu(), neither NFNL_SUBSYS_IPSET mutex
or rcu read lock is held and therefore the checking of them results
false warnings.

Fixes: 97f7cf1cd80e ("netfilter: ipset: fix performance regression in swap operation")
Reported-by: [email protected]
Reported-by: Brad Spengler <[email protected]>
Reported-by: Стас Ничипорович <[email protected]>
Tested-by: Brad Spengler <[email protected]>
Tested-by: Стас Ничипорович <[email protected]>
Signed-off-by: Jozsef Kadlecsik <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>

octeontx2-af: Initialize maps.

kmalloc_array() without __GFP_ZERO flag does not initialize
memory to zero. This causes issues. Use kcalloc() for maps and
bitmap_zalloc() for bitmaps.

Fixes: dd7842878633 ("octeontx2-af: Add new devlink param to configure maximum usable NIX block LFs")
Signed-off-by: Ratheesh Kannoth <[email protected]>
Reviewed-by: Brett Creeley <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>

Merge branch 'cpsw-enable-mac_managed_pm-to-fix-mdio'

Sinthu Raja says:

====================
CPSW: enable mac_managed_pm to fix mdio

This patch fix the resume/suspend issue on CPSW interface.

Reference from the foloowing patchwork:
https://lore.kernel.org/netdev/20221014144729.1159257[email protected]/T/

V1: https://patchwork.kernel.org/project/netdevbpf/patch/20240122083414[email protected]/
V2: https://patchwork.kernel.org/project/netdevbpf/patch/20240122093326[email protected]/
====================

Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>

net: ethernet: ti: cpsw: enable mac_managed_pm to fix mdio

The below commit  introduced a WARN when phy state is not in the states:
PHY_HALTED, PHY_READY and PHY_UP.
commit 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")

When cpsw resumes, there have port in PHY_NOLINK state, so the below
warning comes out. Set mac_managed_pm be true to tell mdio that the phy
resume/suspend is managed by the mac, to fix the following warning:

WARNING: CPU: 0 PID: 965 at drivers/net/phy/phy_device.c:326 mdio_bus_phy_resume+0x140/0x144
CPU: 0 PID: 965 Comm: sh Tainted: G           O       6.1.46-g247b2535b2 #1
Hardware name: Generic AM33XX (Flattened Device Tree)
 unwind_backtrace from show_stack+0x18/0x1c
 show_stack from dump_stack_lvl+0x24/0x2c
 dump_stack_lvl from __warn+0x84/0x15c
 __warn from warn_slowpath_fmt+0x1a8/0x1c8
 warn_slowpath_fmt from mdio_bus_phy_resume+0x140/0x144
 mdio_bus_phy_resume from dpm_run_callback+0x3c/0x140
 dpm_run_callback from device_resume+0xb8/0x2b8
 device_resume from dpm_resume+0x144/0x314
 dpm_resume from dpm_resume_end+0x14/0x20
 dpm_resume_end from suspend_devices_and_enter+0xd0/0x924
 suspend_devices_and_enter from pm_suspend+0x2e0/0x33c
 pm_suspend from state_store+0x74/0xd0
 state_store from kernfs_fop_write_iter+0x104/0x1ec
 kernfs_fop_write_iter from vfs_write+0x1b8/0x358
 vfs_write from ksys_write+0x78/0xf8
 ksys_write from ret_fast_syscall+0x0/0x54
Exception stack(0xe094dfa8 to 0xe094dff0)
dfa0:                   00000004 005c3fb8 00000001 005c3fb8 00000004 00000001
dfc0: 00000004 005c3fb8 b6f6bba0 00000004 00000004 0059edb8 00000000 00000000
dfe0: 00000004 bed918f0 b6f09bd3 b6e89a66

Cc: <[email protected]> # v6.0+
Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Fixes: fba863b81604 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM")
Signed-off-by: Sinthu Raja <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>

net: ethernet: ti: cpsw_new: enable mac_managed_pm to fix mdio

The below commit  introduced a WARN when phy state is not in the states:
PHY_HALTED, PHY_READY and PHY_UP.
commit 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")

When cpsw_new resumes, there have port in PHY_NOLINK state, so the below
warning comes out. Set mac_managed_pm be true to tell mdio that the phy
resume/suspend is managed by the mac, to fix the following warning:

WARNING: CPU: 0 PID: 965 at drivers/net/phy/phy_device.c:326 mdio_bus_phy_resume+0x140/0x144
CPU: 0 PID: 965 Comm: sh Tainted: G           O       6.1.46-g247b2535b2 #1
Hardware name: Generic AM33XX (Flattened Device Tree)
 unwind_backtrace from show_stack+0x18/0x1c
 show_stack from dump_stack_lvl+0x24/0x2c
 dump_stack_lvl from __warn+0x84/0x15c
 __warn from warn_slowpath_fmt+0x1a8/0x1c8
 warn_slowpath_fmt from mdio_bus_phy_resume+0x140/0x144
 mdio_bus_phy_resume from dpm_run_callback+0x3c/0x140
 dpm_run_callback from device_resume+0xb8/0x2b8
 device_resume from dpm_resume+0x144/0x314
 dpm_resume from dpm_resume_end+0x14/0x20
 dpm_resume_end from suspend_devices_and_enter+0xd0/0x924
 suspend_devices_and_enter from pm_suspend+0x2e0/0x33c
 pm_suspend from state_store+0x74/0xd0
 state_store from kernfs_fop_write_iter+0x104/0x1ec
 kernfs_fop_write_iter from vfs_write+0x1b8/0x358
 vfs_write from ksys_write+0x78/0xf8
 ksys_write from ret_fast_syscall+0x0/0x54
Exception stack(0xe094dfa8 to 0xe094dff0)
dfa0:                   00000004 005c3fb8 00000001 005c3fb8 00000004 00000001
dfc0: 00000004 005c3fb8 b6f6bba0 00000004 00000004 0059edb8 00000000 00000000
dfe0: 00000004 bed918f0 b6f09bd3 b6e89a66

Cc: <[email protected]> # v6.0+
Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Fixes: fba863b81604 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM")
Signed-off-by: Sinthu Raja <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>

netfilter: nft_set_pipapo: remove static in nft_pipapo_get()

This has slipped through when reducing memory footprint for set
elements, remove it.

Fixes: 9dad402b89e8 ("netfilter: nf_tables: expose opaque set element as struct nft_elem_priv")
Reported-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>

Merge tag 'v6.8-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

Pull crypto fixes from Herbert Xu:
 "Fix regressions in cbc and algif_hash, as well as an older
  NULL-pointer dereference in ccp"

* tag 'v6.8-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: algif_hash - Remove bogus SGL free on zero-length error path
  crypto: cbc - Ensure statesize is zero
  crypto: ccp - Fix null pointer dereference in __sev_platform_shutdown_locked

Merge tag 'percpu-for-6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu

Pull percpu fix from Dennis Zhou:

 - fix riscv wrong size passed to local_flush_tlb_range_asid()

* tag 'percpu-for-6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
  riscv: Fix wrong size passed to local_flush_tlb_range_asid()

netfilter: nft_compat: restrict match/target protocol to u16

xt_check_{match,target} expects u16, but NFTA_RULE_COMPAT_PROTO is u32.

NLA_POLICY_MAX(NLA_BE32, 65535) cannot be used because .max in
nla_policy is s16, see 3e48be05f3c7 ("netlink: add attribute range
validation to policy").

Fixes: 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables")
Signed-off-by: Pablo Neira Ayuso <[email protected]>

netfilter: nft_compat: reject unused compat flag

Flag (1 << 0) is ignored is set, never used, reject it it with EINVAL
instead.

Fixes: 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables")
Signed-off-by: Pablo Neira Ayuso <[email protected]>

netfilter: nft_compat: narrow down revision to unsigned 8-bits

xt_find_revision() expects u8, restrict it to this datatype.

Fixes: 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables")
Signed-off-by: Pablo Neira Ayuso <[email protected]>

Merge tag 'wireless-2024-02-06' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless

Kalle Valo says:

====================
wireless fixes for v6.8-rc4

This time we have unusually large wireless pull request. Several
functionality fixes to both stack and iwlwifi. Lots of fixes to
warnings, especially to MODULE_DESCRIPTION().

* tag 'wireless-2024-02-06' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (31 commits)
  wifi: mt76: mt7996: fix fortify warning
  wifi: brcmfmac: Adjust n_channels usage for __counted_by
  wifi: iwlwifi: do not announce EPCS support
  wifi: iwlwifi: exit eSR only after the FW does
  wifi: iwlwifi: mvm: fix a battery life regression
  wifi: mac80211: accept broadcast probe responses on 6 GHz
  wifi: mac80211: adding missing drv_mgd_complete_tx() call
  wifi: mac80211: fix waiting for beacons logic
  wifi: mac80211: fix unsolicited broadcast probe config
  wifi: mac80211: initialize SMPS mode correctly
  wifi: mac80211: fix driver debugfs for vif type change
  wifi: mac80211: set station RX-NSS on reconfig
  wifi: mac80211: fix RCU use in TDLS fast-xmit
  wifi: mac80211: improve CSA/ECSA connection refusal
  wifi: cfg80211: detect stuck ECSA element in probe resp
  wifi: iwlwifi: remove extra kernel-doc
  wifi: fill in MODULE_DESCRIPTION()s for mt76 drivers
  wifi: fill in MODULE_DESCRIPTION()s for wilc1000
  wifi: fill in MODULE_DESCRIPTION()s for wl18xx
  wifi: fill in MODULE_DESCRIPTION()s for p54spi
  ...
====================

Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

Merge tag 'loongarch-fixes-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:
 "Fix acpi_core_pic[] array overflow, fix earlycon parameter if KASAN
  enabled, disable UBSAN instrumentation for vDSO build, and two Kconfig
  cleanups"

* tag 'loongarch-fixes-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: vDSO: Disable UBSAN instrumentation
  LoongArch: Fix earlycon parameter if KASAN enabled
  LoongArch: Change acpi_core_pic[NR_CPUS] to acpi_core_pic[MAX_CORE_PIC]
  LoongArch: Select HAVE_ARCH_SECCOMP to use the common SECCOMP menu
  LoongArch: Select ARCH_ENABLE_THP_MIGRATION instead of redefining it

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
 "x86 guest:

   - Avoid false positive for check that only matters on AMD processors

  x86:

   - Give a hint when Win2016 might fail to boot due to XSAVES &&
     !XSAVEC configuration

   - Do not allow creating an in-kernel PIT unless an IOAPIC already
     exists

  RISC-V:

   - Allow ISA extensions that were enabled for bare metal in 6.8 (Zbc,
     scalar and vector crypto, Zfh[min], Zihintntl, Zvfh[min], Zfa)

  S390:

   - fix CC for successful PQAP instruction

   - fix a race when creating a shadow page"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  x86/coco: Define cc_vendor without CONFIG_ARCH_HAS_CC_PLATFORM
  x86/kvm: Fix SEV check in sev_map_percpu_data()
  KVM: x86: Give a hint when Win2016 might fail to boot due to XSAVES erratum
  KVM: x86: Check irqchip mode before create PIT
  KVM: riscv: selftests: Add Zfa extension to get-reg-list test
  RISC-V: KVM: Allow Zfa extension for Guest/VM
  KVM: riscv: selftests: Add Zvfh[min] extensions to get-reg-list test
  RISC-V: KVM: Allow Zvfh[min] extensions for Guest/VM
  KVM: riscv: selftests: Add Zihintntl extension to get-reg-list test
  RISC-V: KVM: Allow Zihintntl extension for Guest/VM
  KVM: riscv: selftests: Add Zfh[min] extensions to get-reg-list test
  RISC-V: KVM: Allow Zfh[min] extensions for Guest/VM
  KVM: riscv: selftests: Add vector crypto extensions to get-reg-list test
  RISC-V: KVM: Allow vector crypto extensions for Guest/VM
  KVM: riscv: selftests: Add scaler crypto extensions to get-reg-list test
  RISC-V: KVM: Allow scalar crypto extensions for Guest/VM
  KVM: riscv: selftests: Add Zbc extension to get-reg-list test
  RISC-V: KVM: Allow Zbc extension for Guest/VM
  KVM: s390: fix cc for successful PQAP
  KVM: s390: vsie: fix race during shadow creation

Merge tag 'nfsd-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux

Pull nfsd fix from Chuck Lever:

 - Address a deadlock regression in RELEASE_LOCKOWNER

* tag 'nfsd-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  nfsd: don't take fi_lock in nfsd_break_deleg_cb()

net: intel: fix old compiler regressions

The kernel build regressions/improvements email contained a couple of
issues with old compilers (in fact all the reports were on different
architectures, but all gcc 5.5) and the FIELD_PREP() and FIELD_GET()
conversions. They're all because an integer #define that should have
been declared as unsigned, was shifted to the point that it could set
the sign bit.

The fix just involves making sure the defines use the "U" identifier on
the constants to make sure they're unsigned. Should make the checkers
happier.

Confirmed with objdump before/after that there is no change to the
binaries.

Issues were reported as follows:
./drivers/net/ethernet/intel/ice/ice_base.c:238:7: note: in expansion of macro 'FIELD_GET'
      (FIELD_GET(GLINT_CTL_ITR_GRAN_25_M, regval) == ICE_ITR_GRAN_US))
       ^
./include/linux/compiler_types.h:435:38: error: call to '__compiletime_assert_1093' declared with attribute error: FIELD_GET: mask is not constant
drivers/net/ethernet/intel/ice/ice_nvm.c:709:16: note: in expansion of macro ‘FIELD_GET’
  orom->major = FIELD_GET(ICE_OROM_VER_MASK, combo_ver);
                ^
./include/linux/compiler_types.h:435:38: error: call to ‘__compiletime_assert_796’ declared with attribute error: FIELD_GET: mask is not constant
drivers/net/ethernet/intel/ice/ice_common.c:945:18: note: in expansion of macro ‘FIELD_GET’
  u8 max_agg_bw = FIELD_GET(GL_PWR_MODE_CTL_CAR_MAX_BW_M,
                  ^
./include/linux/compiler_types.h:435:38: error: call to ‘__compiletime_assert_420’ declared with attribute error: FIELD_GET: mask is not constant
drivers/net/ethernet/intel/i40e/i40e_dcb.c:458:8: note: in expansion of macro ‘FIELD_GET’
  oui = FIELD_GET(I40E_LLDP_TLV_OUI_MASK, ouisubtype);
        ^

Reported-by: Geert Uytterhoeven <[email protected]>
Closes: https://lore.kernel.org/lkml/[email protected]/ #i40e #ice
Fixes: 62589808d73b ("i40e: field get conversion")
Fixes: 5a259f8e0baf ("ice: field get conversion")
Signed-off-by: Jesse Brandeburg <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

MAINTAINERS: Maintainer change for rds

At this point, Santosh has moved onto other things and I am happy
to take over the role of rds maintainer. Update the MAINTAINERS
accordingly.

Signed-off-by: Allison Henderson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

selftests: cmsg_ipv6: repeat the exact packet

cmsg_ipv6 test requests tcpdump to capture 4 packets,
and sends until tcpdump quits. Only the first packet
is "real", however, and the rest are basic UDP packets.
So if tcpdump doesn't start in time it will miss
the real packet and only capture the UDP ones.

This makes the test fail on slow machine (no KVM or with
debug enabled) 100% of the time, while it passes in fast
environments.

Repeat the "real" / expected packet.

Fixes: 9657ad09e1fa ("selftests: net: test IPV6_TCLASS")
Fixes: 05ae83d5a4a2 ("selftests: net: test IPV6_HOPLIMIT")
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

net: stmmac: protect updates of 64-bit statistics counters

As explained by a comment in <linux/u64_stats_sync.h>, write side of struct
u64_stats_sync must ensure mutual exclusion, or one seqcount update could
be lost on 32-bit platforms, thus blocking readers forever. Such lockups
have been observed in real world after stmmac_xmit() on one CPU raced with
stmmac_napi_poll_tx() on another CPU.

To fix the issue without introducing a new lock, split the statics into
three parts:

1. fields updated only under the tx queue lock,
2. fields updated only during NAPI poll,
3. fields updated only from interrupt context,

Updates to fields in the first two groups are already serialized through
other locks. It is sufficient to split the existing struct u64_stats_sync
so that each group has its own.

Note that tx_set_ic_bit is updated from both contexts. Split this counter
so that each context gets its own, and calculate their sum to get the total
value in stmmac_get_ethtool_stats().

For the third group, multiple interrupts may be processed by different CPUs
at the same time, but interrupts on the same CPU will not nest. Move fields
from this group to a newly created per-cpu struct stmmac_pcpu_stats.

Fixes: 133466c3bbe1 ("net: stmmac: use per-queue 64 bit statistics where necessary")
Link: https://lore.kernel.org/netdev/[email protected]/t/
Cc: [email protected]
Signed-off-by: Petr Tesarik <[email protected]>
Reviewed-by: Jisheng Zhang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

Merge tag 'for-6.8-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:

 - two fixes preventing deletion and manual creation of subvolume qgroup

 - unify error code returned for unknown send flags

 - fix assertion during subvolume creation when anonymous device could
   be allocated by other thread (e.g. due to backref walk)

* tag 'for-6.8-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: do not ASSERT() if the newly created subvolume already got read
  btrfs: forbid deleting live subvol qgroup
  btrfs: forbid creating subvol qgroups
  btrfs: send: return EOPNOTSUPP on unknown flags

ppp_async: limit MRU to 64K

syzbot triggered a warning [1] in __alloc_pages():

WARN_ON_ONCE_GFP(order > MAX_PAGE_ORDER, gfp)

Willem fixed a similar issue in commit c0a2a1b0d631 ("ppp: limit MRU to 64K")

Adopt the same sanity check for ppp_async_ioctl(PPPIOCSMRU)

[1]:

 WARNING: CPU: 1 PID: 11 at mm/page_alloc.c:4543 __alloc_pages+0x308/0x698 mm/page_alloc.c:4543
Modules linked in:
CPU: 1 PID: 11 Comm: kworker/u4:0 Not tainted 6.8.0-rc2-syzkaller-g41bccc98fb79 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023
Workqueue: events_unbound flush_to_ldisc
pstate: 204000c5 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
 pc : __alloc_pages+0x308/0x698 mm/page_alloc.c:4543
 lr : __alloc_pages+0xc8/0x698 mm/page_alloc.c:4537
sp : ffff800093967580
x29: ffff800093967660 x28: ffff8000939675a0 x27: dfff800000000000
x26: ffff70001272ceb4 x25: 0000000000000000 x24: ffff8000939675c0
x23: 0000000000000000 x22: 0000000000060820 x21: 1ffff0001272ceb8
x20: ffff8000939675e0 x19: 0000000000000010 x18: ffff800093967120
x17: ffff800083bded5c x16: ffff80008ac97500 x15: 0000000000000005
x14: 1ffff0001272cebc x13: 0000000000000000 x12: 0000000000000000
x11: ffff70001272cec1 x10: 1ffff0001272cec0 x9 : 0000000000000001
x8 : ffff800091c91000 x7 : 0000000000000000 x6 : 000000000000003f
x5 : 00000000ffffffff x4 : 0000000000000000 x3 : 0000000000000020
x2 : 0000000000000008 x1 : 0000000000000000 x0 : ffff8000939675e0
Call trace:
  __alloc_pages+0x308/0x698 mm/page_alloc.c:4543
  __alloc_pages_node include/linux/gfp.h:238 [inline]
  alloc_pages_node include/linux/gfp.h:261 [inline]
  __kmalloc_large_node+0xbc/0x1fc mm/slub.c:3926
  __do_kmalloc_node mm/slub.c:3969 [inline]
  __kmalloc_node_track_caller+0x418/0x620 mm/slub.c:4001
  kmalloc_reserve+0x17c/0x23c net/core/skbuff.c:590
  __alloc_skb+0x1c8/0x3d8 net/core/skbuff.c:651
  __netdev_alloc_skb+0xb8/0x3e8 net/core/skbuff.c:715
  netdev_alloc_skb include/linux/skbuff.h:3235 [inline]
  dev_alloc_skb include/linux/skbuff.h:3248 [inline]
  ppp_async_input drivers/net/ppp/ppp_async.c:863 [inline]
  ppp_asynctty_receive+0x588/0x186c drivers/net/ppp/ppp_async.c:341
  tty_ldisc_receive_buf+0x12c/0x15c drivers/tty/tty_buffer.c:390
  tty_port_default_receive_buf+0x74/0xac drivers/tty/tty_port.c:37
  receive_buf drivers/tty/tty_buffer.c:444 [inline]
  flush_to_ldisc+0x284/0x6e4 drivers/tty/tty_buffer.c:494
  process_one_work+0x694/0x1204 kernel/workqueue.c:2633
  process_scheduled_works kernel/workqueue.c:2706 [inline]
  worker_thread+0x938/0xef4 kernel/workqueue.c:2787
  kthread+0x288/0x310 kernel/kthread.c:388
  ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-and-tested-by: [email protected]
Signed-off-by: Eric Dumazet <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

devlink: avoid potential loop in devlink_rel_nested_in_notify_work()

In case devlink_rel_nested_in_notify_work() can not take the devlink
lock mutex. Convert the work to delayed work and in case of reschedule
do it jiffie later and avoid potential looping.

Suggested-by: Paolo Abeni <[email protected]>
Fixes: c137743bce02 ("devlink: introduce object and nested devlink relationship infra")
Signed-off-by: Jiri Pirko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

af_unix: Call kfree_skb() for dead unix_(sk)->oob_skb in GC.

syzbot reported a warning [0] in __unix_gc() with a repro, which
creates a socketpair and sends one socket's fd to itself using the
peer.

  socketpair(AF_UNIX, SOCK_STREAM, 0, [3, 4]) = 0
  sendmsg(4, {msg_name=NULL, msg_namelen=0, msg_iov=[{iov_base="\360", iov_len=1}],
          msg_iovlen=1, msg_control=[{cmsg_len=20, cmsg_level=SOL_SOCKET,
                                      cmsg_type=SCM_RIGHTS, cmsg_data=[3]}],
          msg_controllen=24, msg_flags=0}, MSG_OOB|MSG_PROBE|MSG_DONTWAIT|MSG_ZEROCOPY) = 1

This forms a self-cyclic reference that GC should finally untangle
but does not due to lack of MSG_OOB handling, resulting in memory
leak.

Recently, commit 11498715f266 ("af_unix: Remove io_uring code for
GC.") removed io_uring's dead code in GC and revealed the problem.

The code was executed at the final stage of GC and unconditionally
moved all GC candidates from gc_candidates to gc_inflight_list.
That papered over the reported problem by always making the following
WARN_ON_ONCE(!list_empty(&gc_candidates)) false.

The problem has been there since commit 2aab4b969002 ("af_unix: fix
struct pid leaks in OOB support") added full scm support for MSG_OOB
while fixing another bug.

To fix this problem, we must call kfree_skb() for unix_sk(sk)->oob_skb
if the socket still exists in gc_candidates after purging collected skb.

Then, we need to set NULL to oob_skb before calling kfree_skb() because
it calls last fput() and triggers unix_release_sock(), where we call
duplicate kfree_skb(u->oob_skb) if not NULL.

Note that the leaked socket remained being linked to a global list, so
kmemleak also could not detect it.  We need to check /proc/net/protocol
to notice the unfreed socket.

[0]:
WARNING: CPU: 0 PID: 2863 at net/unix/garbage.c:345 __unix_gc+0xc74/0xe80 net/unix/garbage.c:345
Modules linked in:
CPU: 0 PID: 2863 Comm: kworker/u4:11 Not tainted 6.8.0-rc1-syzkaller-00583-g1701940b1a02 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
Workqueue: events_unbound __unix_gc
RIP: 0010:__unix_gc+0xc74/0xe80 net/unix/garbage.c:345
Code: 8b 5c 24 50 e9 86 f8 ff ff e8 f8 e4 22 f8 31 d2 48 c7 c6 30 6a 69 89 4c 89 ef e8 97 ef ff ff e9 80 f9 ff ff e8 dd e4 22 f8 90 <0f> 0b 90 e9 7b fd ff ff 48 89 df e8 5c e7 7c f8 e9 d3 f8 ff ff e8
RSP: 0018:ffffc9000b03fba0 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffffc9000b03fc10 RCX: ffffffff816c493e
RDX: ffff88802c02d940 RSI: ffffffff896982f3 RDI: ffffc9000b03fb30
RBP: ffffc9000b03fce0 R08: 0000000000000001 R09: fffff52001607f66
R10: 0000000000000003 R11: 0000000000000002 R12: dffffc0000000000
R13: ffffc9000b03fc10 R14: ffffc9000b03fc10 R15: 0000000000000001
FS:  0000000000000000(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005559c8677a60 CR3: 000000000d57a000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 process_one_work+0x889/0x15e0 kernel/workqueue.c:2633
 process_scheduled_works kernel/workqueue.c:2706 [inline]
 worker_thread+0x8b9/0x12a0 kernel/workqueue.c:2787
 kthread+0x2c6/0x3b0 kernel/kthread.c:388
 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:242
 </TASK>

Reported-by: [email protected]
Closes: https://syzkaller.appspot.com/bug?extid=fa3ef895554bdbfd1183
Fixes: 2aab4b969002 ("af_unix: fix struct pid leaks in OOB support")
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

net: stmmac: xgmac: fix a typo of register name in DPP safety handling

DDPP is copied from Synopsys Data book:

DDPP: Disable Data path Parity Protection.
    When it is 0x0, Data path Parity Protection is enabled.
    When it is 0x1, Data path Parity Protection is disabled.

The macro name should be XGMAC_DPP_DISABLE.

Fixes: 46eba193d04f ("net: stmmac: xgmac: fix handling of DPP safety error for DMA channels")
Signed-off-by: Furong Xu <[email protected]>
Reviewed-by: Serge Semin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>

selftests/net: Amend per-netns counter checks

Selftests here check not only that connect()/accept() for
TCP-AO/TCP-MD5/non-signed-TCP combinations do/don't establish
connections, but also counters: those are per-AO-key, per-socket and
per-netns.

The counters are checked on the server's side, as the server listener
has TCP-AO/TCP-MD5/no keys for different peers. All tests run in
the same namespaces with the same veth pair, created in test_init().

After close() in both client and server, the sides go through
the regular FIN/ACK + FIN/ACK sequence, which goes in the background.
If the selftest has already started a new testing scenario, read
per-netns counters - it may fail in the end iff it doesn't expect
the TCPAOGood per-netns counters go up during the test.

Let's just kill both TCP-AO sides - that will avoid any asynchronous
background TCP-AO segments going to either sides.

Reported-by: Jakub Kicinski <[email protected]>
Closes: https://lore.kernel.org/all/[email protected]/T/#u
Fixes: 6f0c472a6815 ("selftests/net: Add TCP-AO + TCP-MD5 + no sign listen socket tests")
Signed-off-by: Dmitry Safonov <[email protected]>
Link: https://lore.kernel.org/r/20240202-unsigned-md5-netns-counters-v1-1-8b90c37c0566@arista.com
Signed-off-by: Paolo Abeni <[email protected]>

x86/coco: Define cc_vendor without CONFIG_ARCH_HAS_CC_PLATFORM

After commit a9ef277488cf ("x86/kvm: Fix SEV check in
sev_map_percpu_data()"), there is a build error when building
x86_64_defconfig with GCOV using LLVM:

  ld.lld: error: undefined symbol: cc_vendor
  >>> referenced by kvm.c
  >>>               arch/x86/kernel/kvm.o:(kvm_smp_prepare_boot_cpu) in archive vmlinux.a

which corresponds to

  if (cc_vendor != CC_VENDOR_AMD ||
      !cc_platform_has(CC_ATTR_GUEST_MEM_ENCRYPT))
            return;

Without GCOV, clang is able to eliminate the use of cc_vendor because
cc_platform_has() evaluates to false when CONFIG_ARCH_HAS_CC_PLATFORM is
not set, meaning that if statement will be true no matter what value
cc_vendor has.

With GCOV, the instrumentation keeps the use of cc_vendor around for
code coverage purposes but cc_vendor is only declared, not defined,
without CONFIG_ARCH_HAS_CC_PLATFORM, leading to the build error above.

Provide a macro definition of cc_vendor when CONFIG_ARCH_HAS_CC_PLATFORM
is not set with a value of CC_VENDOR_NONE, so that the first condition
can always be evaluated/eliminated at compile time, avoiding the build
error altogether. This is very similar to the situation prior to
commit da86eb961184 ("x86/coco: Get rid of accessor functions").

Signed-off-by: Nathan Chancellor <[email protected]>
Acked-by: Borislav Petkov (AMD) <[email protected]>
Message-Id: <20240202-provide-cc_vendor-without-arch_has_cc_platform-v1-1-09ad5f2a3099@kernel.org>
Fixes: a9ef277488cf ("x86/kvm: Fix SEV check in sev_map_percpu_data()", 2024-01-31)
Signed-off-by: Paolo Bonzini <[email protected]>

tipc: Check the bearer type before calling tipc_udp_nl_bearer_add()

syzbot reported the following general protection fault [1]:

general protection fault, probably for non-canonical address 0xdffffc0000000010: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000080-0x0000000000000087]
...
RIP: 0010:tipc_udp_is_known_peer+0x9c/0x250 net/tipc/udp_media.c:291
...
Call Trace:
 <TASK>
 tipc_udp_nl_bearer_add+0x212/0x2f0 net/tipc/udp_media.c:646
 tipc_nl_bearer_add+0x21e/0x360 net/tipc/bearer.c:1089
 genl_family_rcv_msg_doit+0x1fc/0x2e0 net/netlink/genetlink.c:972
 genl_family_rcv_msg net/netlink/genetlink.c:1052 [inline]
 genl_rcv_msg+0x561/0x800 net/netlink/genetlink.c:1067
 netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2544
 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1076
 netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline]
 netlink_unicast+0x53b/0x810 net/netlink/af_netlink.c:1367
 netlink_sendmsg+0x8b7/0xd70 net/netlink/af_netlink.c:1909
 sock_sendmsg_nosec net/socket.c:730 [inline]
 __sock_sendmsg+0xd5/0x180 net/socket.c:745
 ____sys_sendmsg+0x6ac/0x940 net/socket.c:2584
 ___sys_sendmsg+0x135/0x1d0 net/socket.c:2638
 __sys_sendmsg+0x117/0x1e0 net/socket.c:2667
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

The cause of this issue is that when tipc_nl_bearer_add() is called with
the TIPC_NLA_BEARER_UDP_OPTS attribute, tipc_udp_nl_bearer_add() is called
even if the bearer is not UDP.

tipc_udp_is_known_peer() called by tipc_udp_nl_bearer_add() assumes that
the media_ptr field of the tipc_bearer has an udp_bearer type object, so
the function goes crazy for non-UDP bearers.

This patch fixes the issue by checking the bearer type before calling
tipc_udp_nl_bearer_add() in tipc_nl_bearer_add().

Fixes: ef20cd4dd163 ("tipc: introduce UDP replicast")
Reported-and-tested-by: [email protected]
Closes: https://syzkaller.appspot.com/bug?extid=5142b87a9abc510e14fa [1]
Signed-off-by: Shigeru Yoshida <[email protected]>
Reviewed-by: Tung Nguyen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>

Merge tag 'bcachefs-2024-02-05' of https://evilpiepirate.org/git/bcachefs

Pull bcachefs fixes from Kent Overstreet:
 "Two serious ones here that we'll want to backport to stable: a fix for
  a race in the thread_with_file code, and another locking fixup in the
  subvolume deletion path"

* tag 'bcachefs-2024-02-05' of https://evilpiepirate.org/git/bcachefs:
  bcachefs: time_stats: Check for last_event == 0 when updating freq stats
  bcachefs: install fd later to avoid race with close
  bcachefs: unlock parent dir if entry is not found in subvolume deletion
  bcachefs: Fix build on parisc by avoiding __multi3()

LoongArch: vDSO: Disable UBSAN instrumentation

The vDSO executes in userspace, so the kernel's UBSAN should not
instrument it. Solves these kind of build errors:

  loongarch64-linux-ld: arch/loongarch/vdso/vgettimeofday.o: in function `vdso_shift_ns':
  lib/vdso/gettimeofday.c:23:(.text+0x3f8): undefined reference to `__ubsan_handle_shift_out_of_bounds'

Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Cc: Huacai Chen <[email protected]>
Cc: WANG Xuerui <[email protected]>
Cc: Vincenzo Frascino <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Fangrui Song <[email protected]>
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>

LoongArch: Fix earlycon parameter if KASAN enabled

The earlycon parameter is based on fixmap, and fixmap addresses are not
supposed to be shadowed by KASAN. So return the kasan_early_shadow_page
in kasan_mem_to_shadow() if the input address is above FIXADDR_START.
Otherwise earlycon cannot work after kasan_init().

Cc: [email protected]
Fixes: 5aa4ac64e6add3e ("LoongArch: Add KASAN (Kernel Address Sanitizer) support")
Signed-off-by: Huacai Chen <[email protected]>

LoongArch: Change acpi_core_pic[NR_CPUS] to acpi_core_pic[MAX_CORE_PIC]

With default config, the value of NR_CPUS is 64. When HW platform has
more then 64 cpus, system will crash on these platforms. MAX_CORE_PIC
is the maximum cpu number in MADT table (max physical number) which can
exceed the supported maximum cpu number (NR_CPUS, max logical number),
but kernel should not crash. Kernel should boot cpus with NR_CPUS, let
the remainder cpus stay in BIOS.

The potential crash reason is that the array acpi_core_pic[NR_CPUS] can
be overflowed when parsing MADT table, and it is obvious that CORE_PIC
should be corresponding to physical core rather than logical core, so it
is better to define the array as acpi_core_pic[MAX_CORE_PIC].

With the patch, system can boot up 64 vcpus with qemu parameter -smp 128,
otherwise system will crash with the following message.

[    0.000000] CPU 0 Unable to handle kernel paging request at virtual address 0000420000004259, era == 90000000037a5f0c, ra == 90000000037a46ec
[    0.000000] Oops[#1]:
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.8.0-rc2+ #192
[    0.000000] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022
[    0.000000] pc 90000000037a5f0c ra 90000000037a46ec tp 9000000003c90000 sp 9000000003c93d60
[    0.000000] a0 0000000000000019 a1 9000000003d93bc0 a2 0000000000000000 a3 9000000003c93bd8
[    0.000000] a4 9000000003c93a74 a5 9000000083c93a67 a6 9000000003c938f0 a7 0000000000000005
[    0.000000] t0 0000420000004201 t1 0000000000000000 t2 0000000000000001 t3 0000000000000001
[    0.000000] t4 0000000000000003 t5 0000000000000000 t6 0000000000000030 t7 0000000000000063
[    0.000000] t8 0000000000000014 u0 ffffffffffffffff s9 0000000000000000 s0 9000000003caee98
[    0.000000] s1 90000000041b0480 s2 9000000003c93da0 s3 9000000003c93d98 s4 9000000003c93d90
[    0.000000] s5 9000000003caa000 s6 000000000a7fd000 s7 000000000f556b60 s8 000000000e0a4330
[    0.000000]    ra: 90000000037a46ec platform_init+0x214/0x250
[    0.000000]   ERA: 90000000037a5f0c efi_runtime_init+0x30/0x94
[    0.000000]  CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
[    0.000000]  PRMD: 00000000 (PPLV0 -PIE -PWE)
[    0.000000]  EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
[    0.000000]  ECFG: 00070800 (LIE=11 VS=7)
[    0.000000] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0)
[    0.000000]  BADV: 0000420000004259
[    0.000000]  PRID: 0014c010 (Loongson-64bit, Loongson-3A5000)
[    0.000000] Modules linked in:
[    0.000000] Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____))
[    0.000000] Stack : 9000000003c93a14 9000000003800898 90000000041844f8 90000000037a46ec
[    0.000000]         000000000a7fd000 0000000008290000 0000000000000000 0000000000000000
[    0.000000]         0000000000000000 0000000000000000 00000000019d8000 000000000f556b60
[    0.000000]         000000000a7fd000 000000000f556b08 9000000003ca7700 9000000003800000
[    0.000000]         9000000003c93e50 9000000003800898 9000000003800108 90000000037a484c
[    0.000000]         000000000e0a4330 000000000f556b60 000000000a7fd000 000000000f556b08
[    0.000000]         9000000003ca7700 9000000004184000 0000000000200000 000000000e02b018
[    0.000000]         000000000a7fd000 90000000037a0790 9000000003800108 0000000000000000
[    0.000000]         0000000000000000 000000000e0a4330 000000000f556b60 000000000a7fd000
[    0.000000]         000000000f556b08 000000000eaae298 000000000eaa5040 0000000000200000
[    0.000000]         ...
[    0.000000] Call Trace:
[    0.000000] [<90000000037a5f0c>] efi_runtime_init+0x30/0x94
[    0.000000] [<90000000037a46ec>] platform_init+0x214/0x250
[    0.000000] [<90000000037a484c>] setup_arch+0x124/0x45c
[    0.000000] [<90000000037a0790>] start_kernel+0x90/0x670
[    0.000000] [<900000000378b0d8>] kernel_entry+0xd8/0xdc

Signed-off-by: Bibo Mao <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>

LoongArch: Select HAVE_ARCH_SECCOMP to use the common SECCOMP menu

LoongArch missed the refactoring made by commit 282a181b1a0d ("seccomp:
Move config option SECCOMP to arch/Kconfig") because LoongArch was not
mainlined at that time.

The 'depends on PROC_FS' statement is stale as described in that commit.
Select HAVE_ARCH_SECCOMP, and remove the duplicated config entry.

Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>

LoongArch: Select ARCH_ENABLE_THP_MIGRATION instead of redefining it

ARCH_ENABLE_THP_MIGRATION is supposed to be selected by arch Kconfig.

Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>

wifi: mt76: mt7996: fix fortify warning

Copy cck and ofdm separately in order to avoid __read_overflow2_field
warning.

Fixes: f75e4779d215 ("wifi: mt76: mt7996: add txpower setting support")
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://msgid.link/[email protected]

nfsd: don't take fi_lock in nfsd_break_deleg_cb()

A recent change to check_for_locks() changed it to take ->flc_lock while
holding ->fi_lock.  This creates a lock inversion (reported by lockdep)
because there is a case where ->fi_lock is taken while holding
->flc_lock.

->flc_lock is held across ->fl_lmops callbacks, and
nfsd_break_deleg_cb() is one of those and does take ->fi_lock.  However
it doesn't need to.

Prior to v4.17-rc1~110^2~22 ("nfsd: create a separate lease for each
delegation") nfsd_break_deleg_cb() would walk the ->fi_delegations list
and so needed the lock.  Since then it doesn't walk the list and doesn't
need the lock.

Two actions are performed under the lock.  One is to call
nfsd_break_one_deleg which calls nfsd4_run_cb().  These doesn't act on
the nfs4_file at all, so don't need the lock.

The other is to set ->fi_had_conflict which is in the nfs4_file.
This field is only ever set here (except when initialised to false)
so there is no possible problem will multiple threads racing when
setting it.

The field is tested twice in nfs4_set_delegation().  The first test does
not hold a lock and is documented as an opportunistic optimisation, so
it doesn't impose any need to hold ->fi_lock while setting
->fi_had_conflict.

The second test in nfs4_set_delegation() *is* make under ->fi_lock, so
removing the locking when ->fi_had_conflict is set could make a change.
The change could only be interesting if ->fi_had_conflict tested as
false even though nfsd_break_one_deleg() ran before ->fi_lock was
unlocked.  i.e. while hash_delegation_locked() was running.
As hash_delegation_lock() doesn't interact in any way with nfs4_run_cb()
there can be no importance to this interaction.

So this patch removes the locking from nfsd_break_one_deleg() and moves
the final test on ->fi_had_conflict out of the locked region to make it
clear that locking isn't important to the test.  It is still tested
*after* vfs_setlease() has succeeded.  This might be significant and as
vfs_setlease() takes ->flc_lock, and nfsd_break_one_deleg() is called
under ->flc_lock this "after" is a true ordering provided by a spinlock.

Fixes: edcf9725150e ("nfsd: fix RELEASE_LOCKOWNER")
Signed-off-by: NeilBrown <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>

selftests: net: let big_tcp test cope with slow env

In very slow environments, most big TCP cases including
segmentation and reassembly of big TCP packets have a good
chance to fail: by default the TCP client uses write size
well below 64K. If the host is low enough autocorking is
unable to build real big TCP packets.

Address the issue using much larger write operations.

Note that is hard to observe the issue without an extremely
slow and/or overloaded environment; reduce the TCP transfer
time to allow for much easier/faster reproducibility.

Fixes: 6bb382bcf742 ("selftests: add a selftest for big tcp")
Signed-off-by: Paolo Abeni <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Acked-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

Merge branch 'rxrpc-fixes'

David Howells says:

====================
rxrpc: Miscellaneous fixes

Here some miscellaneous fixes for AF_RXRPC:

 (1) The zero serial number has a special meaning in an ACK packet serial
     reference, so skip it when assigning serial numbers to transmitted
     packets.

 (2) Don't set the reference serial number in a delayed ACK as the ACK
     cannot be used for RTT calculation.

 (3) Don't emit a DUP ACK response to a PING RESPONSE ACK coming back to a
     call that completed in the meantime.

 (4) Fix the counting of acks and nacks in ACK packet to better drive
     congestion management.  We want to know if there have been new
     acks/nacks since the last ACK packet, not that there are still
     acks/nacks.  This is more complicated as we have to save the old SACK
     table and compare it.
====================

Signed-off-by: David S. Miller <[email protected]>

rxrpc: Fix counting of new acks and nacks

Fix the counting of new acks and nacks when parsing a packet - something
that is used in congestion control.

As the code stands, it merely notes if there are any nacks whereas what we
really should do is compare the previous SACK table to the new one,
assuming we get two successive ACK packets with nacks in them.  However, we
really don't want to do that if we can avoid it as the tables might not
correspond directly as one may be shifted from the other - something that
will only get harder to deal with once extended ACK tables come into full
use (with a capacity of up to 8192).

Instead, count the number of nacks shifted out of the old SACK, the number
of nacks retained in the portion still active and the number of new acks
and nacks in the new table then calculate what we need.

Note this ends up a bit of an estimate as the Rx protocol allows acks to be
withdrawn by the receiver and packets requested to be retransmitted.

Fixes: d57a3a151660 ("rxrpc: Save last ACK's SACK table rather than marking txbufs")
Signed-off-by: David Howells <[email protected]>
cc: Marc Dionne <[email protected]>
cc: "David S. Miller" <[email protected]>
cc: Eric Dumazet <[email protected]>
cc: Jakub Kicinski <[email protected]>
cc: Paolo Abeni <[email protected]>
cc: [email protected]
cc: [email protected]
Signed-off-by: David S. Miller <[email protected]>

rxrpc: Fix response to PING RESPONSE ACKs to a dead call

Stop rxrpc from sending a DUP ACK in response to a PING RESPONSE ACK on a
dead call.  We may have initiated the ping but the call may have beaten the
response to completion.

Fixes: 18bfeba50dfd ("rxrpc: Perform terminal call ACK/ABORT retransmission from conn processor")
Signed-off-by: David Howells <[email protected]>
cc: Marc Dionne <[email protected]>
cc: "David S. Miller" <[email protected]>
cc: Eric Dumazet <[email protected]>
cc: Jakub Kicinski <[email protected]>
cc: Paolo Abeni <[email protected]>
cc: [email protected]
cc: [email protected]
Signed-off-by: David S. Miller <[email protected]>

rxrpc: Fix delayed ACKs to not set the reference serial number

Fix the construction of delayed ACKs to not set the reference serial number
as they can't be used as an RTT reference.

Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: David Howells <[email protected]>
cc: Marc Dionne <[email protected]>
cc: "David S. Miller" <[email protected]>
cc: Eric Dumazet <[email protected]>
cc: Jakub Kicinski <[email protected]>
cc: Paolo Abeni <[email protected]>
cc: [email protected]
cc: [email protected]
Signed-off-by: David S. Miller <[email protected]>