Johan Hovold [Tue, 7 May 2024 14:48:16 +0000 (16:48 +0200)]
dt-bindings: HID: i2c-hid: elan: add Elan eKTH5015M
Add a compatible string for the Elan eKTH5015M touch controller.
Judging from the current binding and commit bd3cba00dcc6 ("HID: i2c-hid:
elan: Add support for Elan eKTH6915 i2c-hid touchscreens"), eKTH5015M
appears to be compatible with eKTH6915. Notably the power-on sequence is
the same.
While at it, drop a redundant label from the example.
The Ilitek ILI2901 touch screen controller was apparently incorrectly
added to the Elan eKTH6915 schema simply because it also has a reset
gpio and is currently managed by the Elan driver in Linux.
The two controllers are not related even if an unfortunate wording in
the commit message adding the Ilitek compatible made it sound like they
were.
Add a dedicated schema for the ILI2901 which does not specify the I2C
address (which is likely 0x41 rather than 0x10 as for other Ilitek touch
controllers) to avoid cluttering the Elan schema with unrelated devices
and to make it easier to find the correct schema when adding further
Ilitek controllers.
Aseda Aboagye [Tue, 4 Jun 2024 23:16:32 +0000 (23:16 +0000)]
input: Add support for "Do Not Disturb"
HUTRR94 added support for a new usage titled "System Do Not Disturb"
which toggles a system-wide Do Not Disturb setting. This commit simply
adds a new event code for the usage.
Aseda Aboagye [Tue, 4 Jun 2024 23:10:47 +0000 (23:10 +0000)]
input: Add event code for accessibility key
HUTRR116 added support for a new usage titled "System Accessibility
Binding" which toggles a system-wide bound accessibility UI or command.
This commit simply adds a new event code for the usage.
Jeff Johnson [Fri, 7 Jun 2024 03:23:50 +0000 (20:23 -0700)]
gpio: add missing MODULE_DESCRIPTION() macros
On x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpio/gpio-gw-pld.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpio/gpio-mc33880.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpio/gpio-pcf857x.o
Add the missing invocations of the MODULE_DESCRIPTION() macro,
including the one missing in gpio-pl061.c, which is not built for x86.
David Howells [Fri, 31 May 2024 14:53:42 +0000 (15:53 +0100)]
cifs: Don't advance the I/O iterator before terminating subrequest
There's now no need to make sure subreq->io_iter is advanced to match
subreq->transferred before calling one of the netfs subrequest termination
functions as the check has been removed netfslib and the iterator is reset
prior to retrying a subreq.
Richard Acayan [Wed, 5 Jun 2024 17:58:09 +0000 (13:58 -0400)]
kbuild: explicitly run mksysmap as sed script from link-vmlinux.sh
In commit b18b047002b7 ("kbuild: change scripts/mksysmap into sed
script"), the mksysmap script was transformed into a sed script,
made directly executable with "#!/bin/sed -f". Apparently, the path to
sed is different on NixOS.
The shebang can't use the env command, otherwise the "sed -f" command
would be treated as a single argument. This can be solved with the -S
flag, but that is a GNU extension. Explicitly use sed instead of relying
on the executable shebang to fix NixOS builds without breaking build
environments using Busybox.
Linus Torvalds [Thu, 6 Jun 2024 21:40:51 +0000 (14:40 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The core change is to detect unusually large number of VPD pages
(caused by device manufacturers having an endiannes issue) and reject
them rather than trying to parse a huge non-existent array.
The remaining fixes are in drivers the most user visible of which is
the ALUA state transition recognition (leads to intermittent I/O
errors in some situations otherwise)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: mcq: Fix error output and clean up ufshcd_mcq_abort()
scsi: core: Handle devices which return an unusually large VPD page count
scsi: mpt3sas: Add missing kerneldoc parameter descriptions
scsi: qedf: Set qed_slowpath_params to zero before use
scsi: qedf: Wait for stag work during unload
scsi: qedf: Don't process stag work during unload and recovery
scsi: sr: Fix unintentional arithmetic wraparound
scsi: core: alua: I/O errors for ALUA state transitions
scsi: mpi3mr: Use proper format specifier in mpi3mr_sas_port_add()
Linus Torvalds [Thu, 6 Jun 2024 21:28:11 +0000 (14:28 -0700)]
Merge tag 'pci-v6.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fix from Bjorn Helgaas:
- Revert lockdep checking on locking that protects device resets from
user-space config accesses; it exposed issues for which fixes are in
the works but are too risky for this cycle (Dan Williams)
* tag 'pci-v6.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Revert the cfg_access_lock lockdep mechanism
[CAUSE]
Commit 09e6cef19c9f ("btrfs: refactor alloc_extent_buffer() to
allocate-then-attach method") changes the sequence when allocating a new
extent buffer.
Previously we always called grab_extent_buffer() under
mapping->i_private_lock, to ensure the safety on modification on
folio::private (which is a pointer to extent buffer for regular
sectorsize).
This can lead to the following race:
Thread A is trying to allocate an extent buffer at bytenr X, with 4
4K pages, meanwhile thread B is trying to release the page at X + 4K
(the second page of the extent buffer at X).
Thread A | Thread B
-----------------------------------+-------------------------------------
| btree_release_folio()
| | This is for the page at X + 4K,
| | Not page X.
| |
alloc_extent_buffer() | |- release_extent_buffer()
|- filemap_add_folio() for the | | |- atomic_dec_and_test(eb->refs)
| page at bytenr X (the first | | |
| page). | | |
| Which returned -EEXIST. | | |
| | | |
|- filemap_lock_folio() | | |
| Returned the first page locked. | | |
| | | |
|- grab_extent_buffer() | | |
| |- atomic_inc_not_zero() | | |
| | Returned false | | |
| |- folio_detach_private() | | |- folio_detach_private() for X
| |- folio_test_private() | | |- folio_test_private()
| Returned true | | | Returned true
|- folio_put() | |- folio_put()
Now there are two puts on the same folio at folio X, leading to refcount
underflow of the folio X, and eventually causing the BUG_ON() on the
page->mapping.
The condition is not that easy to hit:
- The release must be triggered for the middle page of an eb
If the release is on the same first page of an eb, page lock would kick
in and prevent the race.
- folio_detach_private() has a very small race window
It's only between folio_test_private() and folio_clear_private().
That's exactly when mapping->i_private_lock is used to prevent such race,
and commit 09e6cef19c9f ("btrfs: refactor alloc_extent_buffer() to
allocate-then-attach method") screwed that up.
At that time, I thought the page lock would kick in as
filemap_release_folio() also requires the page to be locked, but forgot
the filemap_release_folio() only locks one page, not all pages of an
extent buffer.
[FIX]
Move all the code requiring i_private_lock into
attach_eb_folio_to_filemap(), so that everything is done with proper
lock protection.
Furthermore to prevent future problems, add an extra
lockdep_assert_locked() to ensure we're holding the proper lock.
To reproducer that is able to hit the race (takes a few minutes with
instrumented code inserting delays to alloc_extent_buffer()):
Michal Wajdeczko [Fri, 17 May 2024 16:34:05 +0000 (18:34 +0200)]
drm/print: Improve drm_dbg_printer
With recent introduction of a generic drm dev printk function, we
can now store and use location where drm_dbg_printer was invoked
and output it's symbolic name like we do for all drm debug prints.
Michal Wajdeczko [Fri, 17 May 2024 16:34:04 +0000 (18:34 +0200)]
drm/print: Add generic drm dev printk function
We already have some drm printk functions that need to duplicate
a code to get a similar format of the final result, for example:
[ ] 0000:00:00.0: [drm:foo] bar
[ ] 0000:00:00.0: [drm] foo bar
[ ] 0000:00:00.0: [drm] *ERROR* foo
Add a generic __drm_dev_vprintk() function that can format the
final message like all other existing function do and allows us
to keep the formatting code in one place.
Michal Wajdeczko [Thu, 23 May 2024 17:44:29 +0000 (19:44 +0200)]
drm/print: Add missing [drm] prefix to drm based WARN
All drm_device based logging macros, except those related to WARN,
include the [drm] prefix. Fix that.
[ ] 0000:00:00.0: this is a warning
[ ] 0000:00:00.0: drm_WARN_ON(true)
vs
[ ] 0000:00:00.0: [drm] this is a warning
[ ] 0000:00:00.0: [drm] drm_WARN_ON(true)
We currently have debugfs support that allows the userspace to initiate
an asynchronous gt reset on command. However, userspace may also wish
to wait for the completion of the gt reset before performing any
additional work. To that end, add a version of the force_reset gt
debugfs function that operates synchronously.
Linus Torvalds [Thu, 6 Jun 2024 16:55:27 +0000 (09:55 -0700)]
Merge tag 'net-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from BPF and big collection of fixes for WiFi core and
drivers.
Current release - regressions:
- vxlan: fix regression when dropping packets due to invalid src
addresses
- bpf: fix a potential use-after-free in bpf_link_free()
- xdp: revert support for redirect to any xsk socket bound to the
same UMEM as it can result in a corruption
- virtio_net:
- add missing lock protection when reading return code from
control_buf
- fix false-positive lockdep splat in DIM
- Revert "wifi: wilc1000: convert list management to RCU"
- wifi: ath11k: fix error path in ath11k_pcic_ext_irq_config
Previous releases - regressions:
- rtnetlink: make the "split" NLM_DONE handling generic, restore the
old behavior for two cases where we started coalescing those
messages with normal messages, breaking sloppily-coded userspace
- wifi:
- cfg80211: validate HE operation element parsing
- cfg80211: fix 6 GHz scan request building
- mt76: mt7615: add missing chanctx ops
- ath11k: move power type check to ASSOC stage, fix connecting to
6 GHz AP
- ath11k: fix WCN6750 firmware crash caused by 17 num_vdevs
- rtlwifi: ignore IEEE80211_CONF_CHANGE_RETRY_LIMITS
- iwlwifi: mvm: fix a crash on 7265
Previous releases - always broken:
- ncsi: prevent multi-threaded channel probing, a spec violation
- vmxnet3: disable rx data ring on dma allocation failure
- ethtool: init tsinfo stats if requested, prevent unintentionally
reporting all-zero stats on devices which don't implement any
- dst_cache: fix possible races in less common IPv6 features
- tcp: auth: don't consider TCP_CLOSE to be in TCP_AO_ESTABLISHED
- ax25: fix two refcounting bugs
- eth: ionic: fix kernel panic in XDP_TX action
Misc:
- tcp: count CLOSE-WAIT sockets for TCP_MIB_CURRESTAB"
* tag 'net-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (107 commits)
selftests: net: lib: set 'i' as local
selftests: net: lib: avoid error removing empty netns name
selftests: net: lib: support errexit with busywait
net: ethtool: fix the error condition in ethtool_get_phy_stats_ethtool()
ipv6: fix possible race in __fib6_drop_pcpu_from()
af_unix: Annotate data-race of sk->sk_shutdown in sk_diag_fill().
af_unix: Use skb_queue_len_lockless() in sk_diag_show_rqlen().
af_unix: Use skb_queue_empty_lockless() in unix_release_sock().
af_unix: Use unix_recvq_full_lockless() in unix_stream_connect().
af_unix: Annotate data-race of net->unx.sysctl_max_dgram_qlen.
af_unix: Annotate data-races around sk->sk_sndbuf.
af_unix: Annotate data-races around sk->sk_state in UNIX_DIAG.
af_unix: Annotate data-race of sk->sk_state in unix_stream_read_skb().
af_unix: Annotate data-races around sk->sk_state in sendmsg() and recvmsg().
af_unix: Annotate data-race of sk->sk_state in unix_accept().
af_unix: Annotate data-race of sk->sk_state in unix_stream_connect().
af_unix: Annotate data-races around sk->sk_state in unix_write_space() and poll().
af_unix: Annotate data-race of sk->sk_state in unix_inq_len().
af_unix: Annodate data-races around sk->sk_state for writers.
af_unix: Set sk->sk_state under unix_state_lock() for truly disconencted peer.
...
Matthew Brost [Wed, 5 Jun 2024 05:50:41 +0000 (22:50 -0700)]
drm/xe: Do not dereference NULL job->fence in trace points
job->fence is not assigned until xe_sched_job_arm(), check for
job->fence in xe_sched_job_seqno() so any usage of this function (trace
points) do not result in NULL ptr dereference. Also check job->fence
before assigning error in job trace points.
Jakub Kicinski [Thu, 6 Jun 2024 15:23:44 +0000 (08:23 -0700)]
Merge branch 'selftests-net-lib-small-fixes'
Matthieu Baerts says:
====================
selftests: net: lib: small fixes
While looking at using 'lib.sh' for the MPTCP selftests [1], we found
some small issues with 'lib.sh'. Here they are:
- Patch 1: fix 'errexit' (set -e) support with busywait. 'errexit' is
supported in some functions, not all. A fix for v6.8+.
- Patch 2: avoid confusing error messages linked to the cleaning part
when the netns setup fails. A fix for v6.8+.
- Patch 3: set a variable as local to avoid accidentally changing the
value of a another one with the same name on the caller side. A fix
for v6.10-rc1+.
Without this, the 'i' variable declared before could be overridden by
accident, e.g.
for i in "${@}"; do
__ksft_status_merge "${i}" ## 'i' has been modified
foo "${i}" ## using 'i' with an unexpected value
done
After a quick look, it looks like 'i' is currently not used after having
been modified in __ksft_status_merge(), but still, better be safe than
sorry. I saw this while modifying the same file, not because I suspected
an issue somewhere.
selftests: net: lib: avoid error removing empty netns name
If there is an error to create the first netns with 'setup_ns()',
'cleanup_ns()' will be called with an empty string as first parameter.
The consequences is that 'cleanup_ns()' will try to delete an invalid
netns, and wait 20 seconds if the netns list is empty.
Instead of just checking if the name is not empty, convert the string
separated by spaces to an array. Manipulating the array is cleaner, and
calling 'cleanup_ns()' with an empty array will be a no-op.
Vignesh Raman [Wed, 29 May 2024 02:40:47 +0000 (08:10 +0530)]
drm/ci: uprev IGT
test-list.txt and test-list-full.txt are not generated for
cross-builds and they are required by drm-ci for testing
arm32 targets. This is fixed in igt-gpu-tools. So uprev
IGT to include the commit which fixes this issue. Also
disable building xe driver tests for non-intel platforms.
Vignesh Raman [Wed, 29 May 2024 02:40:44 +0000 (08:10 +0530)]
drm/ci: uprev mesa version
zlib.net is not allowing tarball download anymore and results
in below error in kernel+rootfs_arm32 container build,
urllib.error.HTTPError: HTTP Error 403: Forbidden
urllib.error.HTTPError: HTTP Error 415: Unsupported Media Type
Uprev mesa to latest version which includes a fix for this issue.
https://gitlab.freedesktop.org/mesa/mesa/-/commit/908f444e
Use id_tokens for JWT authentication. Since s3 bucket is migrated to
mesa-rootfs, update the variables accordingly. Also copy helper scripts
to install, so that the ci jobs can use these scripts for logging.
Only few steps from the GT restart phase are applicable for the
VF drivers, as initialization of PAT, WOPCM, MOCS or CCS mode can
be done only by the native or PF drivers. Use custom GT restart
function if running in VF mode.
The VF drivers can't trigger real GuC firmware reset using GDRST
register, but for the VF drivers it is sufficient to send VF_RESET
message to reset any VF specific state maintained by the GuC.
Use our existing VF bootstrap function as VF_RESET is part of it.
VF drivers can't modify WOPCM registers nor upload firmwares to
GuC, HuC or GSC. Modify xe_uc initialization functions to skip
those steps if running in the VF mode, or defer to a new custom
helper function that would not include those steps.
Ville Syrjälä [Wed, 5 Jun 2024 11:33:36 +0000 (14:33 +0300)]
drm/i915: Reduce DDI clock gating printk level from NOTICE to DEBUG
No idea why the DDI clock gating print is done with drm_notice().
Just use drm_dbg_kms() since no one is going to be interested in
this under normal circumstances.
projects / linux.git / log