Linus Torvalds [Sat, 25 Feb 2023 19:30:21 +0000 (11:30 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place
- Add support for taking stage-2 access faults in parallel. This was
an accidental omission in the original parallel faults
implementation, but should provide a marginal improvement to
machines w/o FEAT_HAFDBS (such as hardware from the fruit company)
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception
handling and masking unsupported features for nested guests
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at
reducing the trap overhead of running nested
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems
- Avoid VM-wide stop-the-world operations when a vCPU accesses its
own redistributor
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected
exceptions in the host
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add [Oliver]
as co-maintainer
RISC-V:
- Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE
- Correctly place the guest in S-mode after redirecting a trap to the
guest
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
s390:
- Sort out confusion between virtual and physical addresses, which
currently are the same on s390
- A new ioctl that performs cmpxchg on guest memory
- A few fixes
x86:
- Change tdp_mmu to a read-only parameter
- Separate TDP and shadow MMU page fault paths
- Enable Hyper-V invariant TSC control
- Fix a variety of APICv and AVIC bugs, some of them real-world, some
of them affecting architecurally legal but unlikely to happen in
practice
- Mark APIC timer as expired if its in one-shot mode and the count
underflows while the vCPU task was being migrated
- Advertise support for Intel's new fast REP string features
- Fix a double-shootdown issue in the emergency reboot code
- Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give
SVM similar treatment to VMX
- Update Xen's TSC info CPUID sub-leaves as appropriate
- Add support for Hyper-V's extended hypercalls, where "support" at
this point is just forwarding the hypercalls to userspace
- Clean up the kvm->lock vs. kvm->srcu sequences when updating the
PMU and MSR filters
- One-off fixes and cleanups
- Fix and cleanup the range-based TLB flushing code, used when KVM is
running on Hyper-V
- Add support for filtering PMU events using a mask. If userspace
wants to restrict heavily what events the guest can use, it can now
do so without needing an absurd number of filter entries
- Clean up KVM's handling of "PMU MSRs to save", especially when vPMU
support is disabled
- Add PEBS support for Intel Sapphire Rapids
- Fix a mostly benign overflow bug in SEV's
send|receive_update_data()
- Move several SVM-specific flags into vcpu_svm
x86 Intel:
- Handle NMI VM-Exits before leaving the noinstr region
- A few trivial cleanups in the VM-Enter flows
- Stop enabling VMFUNC for L1 purely to document that KVM doesn't
support EPTP switching (or any other VM function) for L1
- Fix a crash when using eVMCS's enlighted MSR bitmaps
Generic:
- Clean up the hardware enable and initialization flow, which was
scattered around multiple arch-specific hooks. Instead, just let
the arch code call into generic code. Both x86 and ARM should
benefit from not having to fight common KVM code's notion of how to
do initialization
- Account allocations in generic kvm_arch_alloc_vm()
- Fix a memory leak if coalesced MMIO unregistration fails
selftests:
- On x86, cache the CPU vendor (AMD vs. Intel) and use the info to
emit the correct hypercall instruction instead of relying on KVM to
patch in VMMCALL
- Use TAP interface for kvm_binary_stats_test and tsc_msrs_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (325 commits)
KVM: SVM: hyper-v: placate modpost section mismatch error
KVM: x86/mmu: Make tdp_mmu_allowed static
KVM: arm64: nv: Use reg_to_encoding() to get sysreg ID
KVM: arm64: nv: Only toggle cache for virtual EL2 when SCTLR_EL2 changes
KVM: arm64: nv: Filter out unsupported features from ID regs
KVM: arm64: nv: Emulate EL12 register accesses from the virtual EL2
KVM: arm64: nv: Allow a sysreg to be hidden from userspace only
KVM: arm64: nv: Emulate PSTATE.M for a guest hypervisor
KVM: arm64: nv: Add accessors for SPSR_EL1, ELR_EL1 and VBAR_EL1 from virtual EL2
KVM: arm64: nv: Handle SMCs taken from virtual EL2
KVM: arm64: nv: Handle trapped ERET from virtual EL2
KVM: arm64: nv: Inject HVC exceptions to the virtual EL2
KVM: arm64: nv: Support virtual EL2 exceptions
KVM: arm64: nv: Handle HCR_EL2.NV system register traps
KVM: arm64: nv: Add nested virt VCPU primitives for vEL2 VCPU state
KVM: arm64: nv: Add EL2 system registers to vcpu context
KVM: arm64: nv: Allow userspace to set PSR_MODE_EL2x
KVM: arm64: nv: Reset VCPU to EL2 registers if VCPU nested virt is set
KVM: arm64: nv: Introduce nested virtualization VCPU feature
KVM: arm64: Use the S2 MMU context to iterate over S2 table
...
Linus Torvalds [Sat, 25 Feb 2023 19:14:08 +0000 (11:14 -0800)]
Merge tag 'riscv-for-linus-6.3-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
"There's a bunch of fixes/cleanups throughout the tree as usual, but we
also have a handful of new features:
- Various improvements to the extension detection and alternative
patching infrastructure
- Zbb-optimized string routines
- Support for cpu-capacity in the RISC-V DT bindings
- Zicbom no longer depends on toolchain support
- Some performance and code size improvements to ftrace
- Support for ARCH_WANT_LD_ORPHAN_WARN
- Oops now contain the faulting instruction"
* tag 'riscv-for-linus-6.3-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (67 commits)
RISC-V: add a spin_shadow_stack declaration
riscv: mm: hugetlb: Enable ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP
riscv: Add header include guards to insn.h
riscv: alternative: proceed one more instruction for auipc/jalr pair
riscv: Avoid enabling interrupts in die()
riscv, mm: Perform BPF exhandler fixup on page fault
RISC-V: take text_mutex during alternative patching
riscv: hwcap: Don't alphabetize ISA extension IDs
RISC-V: fix ordering of Zbb extension
riscv: jump_label: Fixup unaligned arch_static_branch function
RISC-V: Only provide the single-letter extensions in HWCAP
riscv: mm: fix regression due to update_mmu_cache change
scripts/decodecode: Add support for RISC-V
riscv: Add instruction dump to RISC-V splats
riscv: select ARCH_WANT_LD_ORPHAN_WARN for !XIP_KERNEL
riscv: vmlinux.lds.S: explicitly catch .init.bss sections from EFI stub
riscv: vmlinux.lds.S: explicitly catch .riscv.attributes sections
riscv: vmlinux.lds.S: explicitly catch .rela.dyn symbols
riscv: lds: define RUNTIME_DISCARD_EXIT
RISC-V: move some stray __RISCV_INSN_FUNCS definitions from kprobes
...
Linus Torvalds [Sat, 25 Feb 2023 19:00:06 +0000 (11:00 -0800)]
Merge tag 'powerpc-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Support for configuring secure boot with user-defined keys on PowerVM
LPARs
- Simplify the replay of soft-masked IRQs by making it non-recursive
- Add support for KCSAN on 64-bit Book3S
- Improvements to the API & code which interacts with RTAS (pseries
firmware)
- Change 32-bit powermac to assign PCI bus numbers per domain by
default
- Some improvements to the 32-bit BPF JIT
- Various other small features and fixes
Thanks to Anders Roxell, Andrew Donnellan, Andrew Jeffery, Benjamin
Gray, Christophe Leroy, Frederic Barrat, Ganesh Goudar, Geoff Levand,
Greg Kroah-Hartman, Jan-Benedict Glaw, Josh Poimboeuf, Kajol Jain,
Laurent Dufour, Mahesh Salgaonkar, Mathieu Desnoyers, Mimi Zohar, Murphy
Zhou, Nathan Chancellor, Nathan Lynch, Nayna Jain, Nicholas Piggin, Pali
Rohár, Petr Mladek, Rohan McLure, Russell Currey, Sachin Sant, Sathvika
Vasireddy, Sourabh Jain, Stefan Berger, Stephen Rothwell, and Sudhakar
Kuppusamy.
* tag 'powerpc-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (114 commits)
powerpc/pseries: Avoid hcall in plpks_is_available() on non-pseries
powerpc: dts: turris1x.dts: Set lower priority for CPLD syscon-reboot
powerpc/e500: Add missing prototype for 'relocate_init'
powerpc/64: Fix unannotated intra-function call warning
powerpc/epapr: Don't use wrteei on non booke
powerpc: Pass correct CPU reference to assembler
powerpc/mm: Rearrange if-else block to avoid clang warning
powerpc/nohash: Fix build with llvm-as
powerpc/nohash: Fix build error with binutils >= 2.38
powerpc/pseries: Fix endianness issue when parsing PLPKS secvar flags
macintosh: windfarm: Use unsigned type for 1-bit bitfields
powerpc/kexec_file: print error string on usable memory property update failure
powerpc/machdep: warn when machine_is() used too early
powerpc/64: Replace -mcpu=e500mc64 by -mcpu=e5500
powerpc/eeh: Set channel state after notifying the drivers
selftests/powerpc: Fix incorrect kernel headers search path
powerpc/rtas: arch-wide function token lookup conversions
powerpc/rtas: introduce rtas_function_token() API
powerpc/pseries/lpar: convert to papr_sysparm API
powerpc/pseries/hv-24x7: convert to papr_sysparm API
...
Linus Torvalds [Sat, 25 Feb 2023 17:19:23 +0000 (09:19 -0800)]
Merge tag 'cxl-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) updates from Dan Williams:
"To date Linux has been dependent on platform-firmware to map CXL RAM
regions and handle events / errors from devices. With this update we
can now parse / update the CXL memory layout, and report events /
errors from devices. This is a precursor for the CXL subsystem to
handle the end-to-end "RAS" flow for CXL memory. i.e. the flow that
for DDR-attached-DRAM is handled by the EDAC driver where it maps
system physical address events to a field-replaceable-unit (FRU /
endpoint device). In general, CXL has the potential to standardize
what has historically been a pile of memory-controller-specific error
handling logic.
Another change of note is the default policy for handling RAM-backed
device-dax instances. Previously the default access mode was "device",
mmap(2) a device special file to access memory. The new default is
"kmem" where the address range is assigned to the core-mm via
add_memory_driver_managed(). This saves typical users from wondering
why their platform memory is not visible via free(1) and stuck behind
a device-file. At the same time it allows expert users to deploy
policy to, for example, get dedicated access to high performance
memory, or hide low performance memory from general purpose kernel
allocations. This affects not only CXL, but also systems with
high-bandwidth-memory that platform-firmware tags with the
EFI_MEMORY_SP (special purpose) designation.
Summary:
- CXL RAM region enumeration: instantiate 'struct cxl_region' objects
for platform firmware created memory regions
- CXL RAM region provisioning: complement the existing PMEM region
creation support with RAM region support
- "Soft Reservation" policy change: Online (memory hot-add)
soft-reserved memory (EFI_MEMORY_SP) by default, but still allow
for setting aside such memory for dedicated access via device-dax.
- CXL Events and Interrupts: Takeover CXL event handling from
platform-firmware (ACPI calls this CXL Memory Error Reporting) and
export CXL Events via Linux Trace Events.
- Convey CXL _OSC results to drivers: Similar to PCI, let the CXL
subsystem interrogate the result of CXL _OSC negotiation.
- Emulate CXL DVSEC Range Registers as "decoders": Allow for
first-generation devices that pre-date the definition of the CXL
HDM Decoder Capability to translate the CXL DVSEC Range Registers
into 'struct cxl_decoder' objects.
- Set timestamp: Per spec, set the device timestamp in case of
hotplug, or if platform-firwmare failed to set it.
- General fixups: linux-next build issues, non-urgent fixes for
pre-production hardware, unit test fixes, spelling and debug
message improvements"
* tag 'cxl-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (66 commits)
dax/kmem: Fix leak of memory-hotplug resources
cxl/mem: Add kdoc param for event log driver state
cxl/trace: Add serial number to trace points
cxl/trace: Add host output to trace points
cxl/trace: Standardize device information output
cxl/pci: Remove locked check for dvsec_range_allowed()
cxl/hdm: Add emulation when HDM decoders are not committed
cxl/hdm: Create emulated cxl_hdm for devices that do not have HDM decoders
cxl/hdm: Emulate HDM decoder from DVSEC range registers
cxl/pci: Refactor cxl_hdm_decode_init()
cxl/port: Export cxl_dvsec_rr_decode() to cxl_port
cxl/pci: Break out range register decoding from cxl_hdm_decode_init()
cxl: add RAS status unmasking for CXL
cxl: remove unnecessary calling of pci_enable_pcie_error_reporting()
dax/hmem: build hmem device support as module if possible
dax: cxl: add CXL_REGION dependency
cxl: avoid returning uninitialized error code
cxl/pmem: Fix nvdimm registration races
cxl/mem: Fix UAPI command comment
cxl/uapi: Tag commands from cxl_query_cmd()
...
Linus Torvalds [Sat, 25 Feb 2023 17:11:30 +0000 (09:11 -0800)]
Merge tag 'x86_tdx_for_6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull Intel Trust Domain Extensions (TDX) updates from Dave Hansen:
"Other than a minor fixup, the content here is to ensure that TDX
guests never see virtualization exceptions (#VE's) that might be
induced by the untrusted VMM.
This is a highly desirable property. Without it, #VE exception
handling would fall somewhere between NMIs, machine checks and total
insanity. With it, #VE handling remains pretty mundane.
Summary:
- Fixup comment typo
- Prevent unexpected #VE's from:
- Hosts removing perfectly good guest mappings (SEPT_VE_DISABLE)
- Excessive #VE notifications (NOTIFY_ENABLES) which are delivered
via a #VE"
* tag 'x86_tdx_for_6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tdx: Do not corrupt frame-pointer in __tdx_hypercall()
x86/tdx: Disable NOTIFY_ENABLES
x86/tdx: Relax SEPT_VE_DISABLE check for debug TD
x86/tdx: Use ReportFatalError to report missing SEPT_VE_DISABLE
x86/tdx: Expand __tdx_hypercall() to handle more arguments
x86/tdx: Refactor __tdx_hypercall() to allow pass down more arguments
x86/tdx: Add more registers to struct tdx_hypercall_args
x86/tdx: Fix typo in comment in __tdx_hypercall()
Tiezhu Yang [Sat, 25 Feb 2023 07:52:57 +0000 (15:52 +0800)]
LoongArch: Mark some assembler symbols as non-kprobe-able
Some assembler symbols are not kprobe safe, such as handle_syscall (used
as syscall exception handler), *memset*/*memcpy*/*memmove* (may cause
recursive exceptions), they can not be instrumented, just blacklist them
for kprobing.
Qing Zhang [Sat, 25 Feb 2023 07:52:57 +0000 (15:52 +0800)]
LoongArch: ptrace: Add hardware single step support
Use the generic ptrace_resume code for PTRACE_SYSCALL, PTRACE_CONT,
PTRACE_KILL and PTRACE_SINGLESTEP handling. This implies defining
arch_has_single_step() and implementing the user_enable_single_step()
and user_disable_single_step() functions.
LoongArch cannot do hardware single-stepping per se, the hardware
single-stepping it is achieved by configuring the instruction fetch
watchpoints (FWPS) and specifies that the next instruction must trigger
the watch exception by setting the mask bit. In some scenarios
CSR.FWPS.Skip is used to ignore the next hit result, avoid endless
repeated triggering of the same watchpoint without canceling it.
Qing Zhang [Sat, 25 Feb 2023 07:52:57 +0000 (15:52 +0800)]
LoongArch: ptrace: Add function argument access API
Add regs_get_argument() which returns N th argument of the function
call, This enables ftrace kprobe events to access kernel function
arguments via $argN syntax for later use.
Qing Zhang [Sat, 25 Feb 2023 07:52:57 +0000 (15:52 +0800)]
LoongArch: ptrace: Expose hardware breakpoints to debuggers
Implement the regset-based ptrace interface that exposes hardware
breakpoints to user-space debuggers to query and set instruction and
data breakpoints.
Qing Zhang [Sat, 25 Feb 2023 07:52:57 +0000 (15:52 +0800)]
LoongArch: Add hardware breakpoints/watchpoints support
Use perf framework to manage hardware instruction and data breakpoints.
LoongArch defines hardware watchpoint functions for instruction fetch
and memory load/store operations. After the software configures hardware
watchpoints, the processor hardware will monitor the access address of
the instruction fetch and load/store operation, and trigger an exception
of the watchpoint when it meets the conditions set by the watchpoint.
The hardware monitoring points for instruction fetching and load/store
operations each have a register for the overall configuration of all
monitoring points, a register for recording the status of all monitoring
points, and four registers required for configuration of each watchpoint
individually.
Youling Tang [Sat, 25 Feb 2023 07:52:56 +0000 (15:52 +0800)]
LoongArch: kdump: Add crashkernel=YM handling
When the kernel crashkernel parameter is specified with just a size,
we are supposed to allocate a region from RAM to store the crashkernel,
"crashkernel=512M" would be recommended for kdump.
Fix this by lifting similar code from x86, importing it to LoongArch
with LoongArch specific parameters added. We allocate the crashkernel
region from the first 4GB of physical memory (because SWIOTLB should be
allocated below 4GB). However, LoongArch currently does not implement
crashkernel_low and crashkernel_high the same as x86.
When X is not specified, crash_base defaults to 0 (crashkernel=YM@XM).
Youling Tang [Sat, 25 Feb 2023 07:52:56 +0000 (15:52 +0800)]
LoongArch: kdump: Add single kernel image implementation
This feature depends on the kernel being relocatable.
Enable using single kernel image for kdump, and then no longer need to
build two kernels (production kernel and capture kernel share a single
kernel image).
Also enable CONFIG_CRASH_DUMP in loongson3_defconfig.
Youling Tang [Sat, 25 Feb 2023 07:52:56 +0000 (15:52 +0800)]
LoongArch: Add support for kernel address space layout randomization (KASLR)
This patch adds support for relocating the kernel to a random address.
Entropy is derived from the banner, which will change every build and
random_get_entropy() which should provide additional runtime entropy.
The kernel is relocated by up to RANDOMIZE_BASE_MAX_OFFSET bytes from
its link address. Because relocation happens so early during the kernel
booting, the amount of physical memory has not yet been determined. This
means the only way to limit relocation within the available memory is
via Kconfig. So we limit the maximum value of RANDOMIZE_BASE_MAX_OFFSET
to 256M (0x10000000) because our memory layout has many holes.
Youling Tang [Sat, 25 Feb 2023 07:52:56 +0000 (15:52 +0800)]
LoongArch: Add la_abs macro implementation
Use the "la_abs macro" instead of the "la.abs pseudo instruction" to
prepare for the subsequent PIE kernel. When PIE is not enabled, la_abs
is equivalent to la.abs.
Huacai Chen [Sat, 25 Feb 2023 07:52:56 +0000 (15:52 +0800)]
LoongArch: Make -mstrict-align configurable
Introduce Kconfig option ARCH_STRICT_ALIGN to make -mstrict-align be
configurable.
Not all LoongArch cores support h/w unaligned access, we can use the
-mstrict-align build parameter to prevent unaligned accesses.
CPUs with h/w unaligned access support:
Loongson-2K2000/2K3000/3A5000/3C5000/3D5000.
CPUs without h/w unaligned access support:
Loongson-2K500/2K1000.
This option is enabled by default to make the kernel be able to run on
all LoongArch systems. But you can disable it manually if you want to
run kernel only on systems with h/w unaligned access support in order to
optimise for performance.
Tiezhu Yang [Sat, 25 Feb 2023 07:52:56 +0000 (15:52 +0800)]
LoongArch: Only call get_timer_irq() once in constant_clockevent_init()
Under CONFIG_DEBUG_ATOMIC_SLEEP=y and CONFIG_DEBUG_PREEMPT=y, we can see
the following messages on LoongArch, this is because using might_sleep()
in preemption disable context.
In order to avoid the above issue, we should break the call chains,
using timer_irq_installed variable as check condition to only call
get_timer_irq() once in constant_clockevent_init() is a simple and
proper way.
Saravana Kannan [Sat, 25 Feb 2023 06:54:42 +0000 (22:54 -0800)]
driver core: fw_devlink: Print full path and name of fwnode
Some of the log messages were printing just the fwnode name. While it's
short, it's not always uniquely identifiable in system. So print the
full path and name to make debugging easier.
fw_devlink can sometimes try to create a device link with the consumer
and supplier as the same device. These attempts will fail (correctly),
but are harmless. So, avoid printing an error for these cases. Also, add
more detail to the error message.
Al Viro [Fri, 2 Sep 2022 01:50:12 +0000 (02:50 +0100)]
alpha: lazy FPU switching
On each context switch we save the FPU registers on stack
of old process and restore FPU registers from the stack of new one.
That allows us to avoid doing that each time we enter/leave the
kernel mode; however, that can get suboptimal in some cases.
For one thing, we don't need to bother saving anything
for kernel threads. For another, if between entering and leaving
the kernel a thread gives CPU up more than once, it will do
useless work, saving the same values every time, only to discard
the saved copy as soon as it returns from switch_to().
Alternative solution:
* move the array we save into from switch_stack to thread_info
* have a (thread-synchronous) flag set when we save them
* have another flag set when they should be restored on return to userland.
* do *NOT* save/restore them in do_switch_stack()/undo_switch_stack().
* restore on the exit to user mode if the restore flag had
been set. Clear both flags.
* on context switch, entry to fork/clone/vfork, before entry into do_signal()
and on entry into straced syscall save the registers and set the 'saved' flag
unless it had been already set.
* on context switch set the 'restore' flag as well.
* have copy_thread() set both flags for child, so the registers would be
restored once the child returns to userland.
* use the saved data in setup_sigcontext(); have restore_sigcontext() set both flags
and copy from sigframe to save area.
* teach ptrace to look for FPU registers in thread_info instead of
switch_stack.
* teach isolated accesses to FPU registers (rdfpcr, wrfpcr, etc.)
to check the 'saved' flag (under preempt_disable()) and work with the save area
if it's been set; if 'saved' flag is found upon write access, set 'restore' flag
as well.
Al Viro [Wed, 11 Jan 2023 20:44:25 +0000 (20:44 +0000)]
alpha/boot/misc: trim unused declarations
gzip_mark() and gzip_release() are gone; there used to be two
forward declarations of each and the patch removing those suckers
had left one of each behind...
Al Viro [Wed, 11 Jan 2023 20:43:59 +0000 (20:43 +0000)]
alpha/boot/tools/objstrip: fix the check for ELF header
Just memcmp() with ELFMAG - that's the normal way to do it in userland
code, which that thing is. Besides, that has the benefit of actually
building - str_has_prefix() is *NOT* present in <string.h>.
Fixes: 5f14596e55de "alpha: Replace strncmp with str_has_prefix" Signed-off-by: Al Viro <[email protected]> Signed-off-by: Matt Turner <[email protected]>
Al Viro [Sat, 7 Jan 2023 00:59:29 +0000 (00:59 +0000)]
alpha: fix FEN fault handling
Type 3 instruction fault (FPU insn with FPU disabled) is handled
by quietly enabling FPU and returning. Which is fine, except that
we need to do that both for fault in userland and in the kernel;
the latter *can* legitimately happen - all it takes is this:
- call_pal CLRFEN to clear "FPU enabled" flag and arrange for
a signal delivery (SIGSEGV in this case).
Fixed by moving the handling of type 3 into the common part of
do_entIF(), before we check for kernel vs. user mode.
Incidentally, check for kernel mode is unidiomatic; the normal
way to do that is !user_mode(regs). The difference is that
the open-coded variant treats any of bits 63..3 of regs->ps being
set as "it's user mode" while the normal approach is to check just
the bit 3. PS is a 4-bit register and regs->ps always will have
bits 63..4 clear, so the open-code variant here is actually equivalent
to !user_mode(regs). Harder to follow, though...
Reproducer above will crash any box where CLRFEN is not ignored by
PAL (== any actual hardware, AFAICS; PAL used in qemu doesn't
bother implementing that crap).
Linus Torvalds [Sat, 25 Feb 2023 03:20:07 +0000 (19:20 -0800)]
Merge branch 'work.namespace' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull ipc namespace update from Al Viro:
"Rik's patches reducing the amount of synchronize_rcu() triggered by
ipc namespace destruction.
I've some pending stuff reducing that on the normal umount side, but
it's nowhere near ready and Rik's stuff shouldn't be held back due to
conflicts - I'll just redo the parts of my series that stray into
ipc/*"
* 'work.namespace' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ipc,namespace: batch free ipc_namespace structures
ipc,namespace: make ipc namespace allocation wait for pending free
Linus Torvalds [Sat, 25 Feb 2023 03:05:45 +0000 (19:05 -0800)]
Merge branch 'work.alpha' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull alpha updates from Al Viro:
"FEN (floating-point enable) fault fix deals with a really old oopsable
braino, the rest is alpha/boot compile fixes and minor cleaning up"
* 'work.alpha' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
alpha/boot/misc: trim unused declarations
alpha/boot/tools/objstrip: fix the check for ELF header
alpha/boot: fix the breakage from -isystem series...
alpha: fix FEN fault handling
Linus Torvalds [Sat, 25 Feb 2023 03:03:26 +0000 (19:03 -0800)]
Merge branch 'work.sysv' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull sysv updates from Al Viro:
"Fabio's 'switch to kmap_local_page()' patchset (originally after the
ext2 counterpart, with a lot of cleaning up done to it; as the matter
of fact, ext2 side is in need of similar cleanups - calling
conventions there are bloody awful).
Plus the equivalents of minix stuff..."
* 'work.sysv' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
sysv: fix handling of delete_entry and set_link failures
fs/sysv: Replace kmap() with kmap_local_page()
fs/sysv: Use dir_put_page() in sysv_rename()
fs/sysv: Change the signature of dir_get_page()
fs/sysv: Use the offset_in_page() helper
sysv: don't flush page immediately for DIRSYNC directories
Nick Child [Thu, 23 Feb 2023 15:39:44 +0000 (09:39 -0600)]
ibmvnic: Assign XPS map to correct queue index
When setting the XPS map value for TX queues, use the index of the
transmit queue.
Previously, the function was passing the index of the loop that iterates
over all queues (RX and TX). This was causing invalid XPS map values.
Linus Torvalds [Sat, 25 Feb 2023 01:29:52 +0000 (17:29 -0800)]
Merge tag 'soundwire-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
"This is a small update which features a bit of core changes and driver
updates in Intel and cadence driver.
Core:
- sdw_transfer_defer() API change to drop an argument
- Reset page address rework
- Export sdw_nwrite_no_pm and sdw_nread_no_pm APIs
Drivers:
- Cadence and related intel driver updates for FIFO handling and low
level msg transfers"
* tag 'soundwire-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: cadence: further simplify low-level xfer_msg_defer() callback
soundwire: cadence: use directly bus sdw_defer structure
soundwire: bus: remove sdw_defer argument in sdw_transfer_defer()
soundwire: stream: use consistent pattern for freeing buffers
soundwire: bus: Remove unused reset_page_addr() callback
soundwire: bus: Don't zero page registers after every transaction
soundwire: bus_type: Avoid lockdep assert in sdw_drv_probe()
soundwire: stream: Move remaining register accesses over to no_pm
soundwire: debugfs: Switch to sdw_read_no_pm
soundwire: Provide build stubs for common functions
soundwire: bus: export sdw_nwrite_no_pm and sdw_nread_no_pm functions
soundwire: cadence: remove unused sdw_cdns_master_ops declaration
soundwire: enable optional clock registers for SoundWire 1.2 devices
ASoC/soundwire: remove is_sdca boolean property
soundwire: cadence: Drain the RX FIFO after an IO timeout
soundwire: cadence: Remove wasted space in response_buf
soundwire: cadence: Don't overflow the command FIFOs
soundwire: intel: remove DAI startup/shutdown
Linus Torvalds [Sat, 25 Feb 2023 01:18:54 +0000 (17:18 -0800)]
Merge tag 'dmaengine-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"A new driver, couple of device support and binding conversion along
with bunch of driver updates are the main features of this.
- IMX sdma binding conversion to yaml and HDMI audio support
- IMX mxs binding conversion to yaml"
* tag 'dmaengine-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (35 commits)
dmaengine: idma64: Update bytes_transferred field
dmaengine: imx-sdma: Set DMA channel to be private
dmaengine: dw: Move check for paused channel to dwc_get_residue()
dmaengine: ptdma: check for null desc before calling pt_cmd_callback
dmaengine: dw-axi-dmac: Do not dereference NULL structure
dmaengine: idxd: Fix default allowed read buffers value in group
dmaengine: sf-pdma: pdma_desc memory leak fix
dmaengine: Simplify dmaenginem_async_device_register() function
dmaengine: use sysfs_emit() to instead of scnprintf()
dmaengine: Make an order in struct dma_device definition
dt-bindings: dma: cleanup examples - indentation, lowercase hex
dt-bindings: dma: drop unneeded quotes
dmaengine: xilinx: xdma: Add user logic interrupt support
dmaengine: xilinx: xdma: Add xilinx xdma driver
dmaengine: drivers: Use devm_platform_ioremap_resource()
dmaengine: at_xdmac: remove empty line
dmaengine: at_xdmac: add runtime pm support
dmaengine: at_xdmac: align properly function members
dmaengine: ppc4xx: Convert to use sysfs_emit()/sysfs_emit_at() APIs
dmaengine: sun6i: Set the maximum segment size
...
Linus Torvalds [Sat, 25 Feb 2023 00:51:40 +0000 (16:51 -0800)]
Merge tag 'pci-v6.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Rework portdrv shutdown so it disables interrupts but doesn't
disable bus mastering, which leads to hangs on Loongson LS7A
- Add mechanism to prevent Max_Read_Request_Size (MRRS) increases,
again to avoid hardware issues on Loongson LS7A (and likely other
devices based on DesignWare IP)
- Ignore devices with a firmware (DT or ACPI) node that says the
device is disabled
Resource management:
- Distribute spare resources to unconfigured hotplug bridges at
boot-time (not just when hot-adding such a bridge), which makes
hot-adding devices to docks work better. Tried this in v6.1 but had
to revert for regressions, so try again
- Fix root bus issue that dropped resources that happened to end
at 0, e.g., [bus 00]
PCI device hotplug:
- Remove device locking when marking device as disconnected so this
doesn't have to wait for concurrent driver bind/unbind to complete
- Quirk more Qualcomm bridges that don't fully implement the PCIe
Slot Status 'Command Completed' bit
Power management:
- Account for _S0W of the target bridge in acpi_pci_bridge_d3() so we
don't miss hot-add notifications for USB4 docks, Thunderbolt, etc
Reset:
- Observe delay after reset, e.g., resuming from system sleep,
regardless of whether a bridge can suspend to D3cold at runtime
- Wait for secondary bus to become ready after a bridge reset
Virtualization:
- Avoid FLR on some AMD FCH AHCI adapters where it doesn't work
- Allow independent IOMMU groups for some Wangxun NICs that prevent
peer-to-peer transactions but don't advertise an ACS Capability
Error handling:
- Configure End-to-End-CRC (ECRC) only if Linux owns the AER
Capability
- Remove redundant Device Control Error Reporting Enable in the AER
service driver since this is already done for all devices during
enumeration
ASPM:
- Add pci_enable_link_state() interface to allow drivers to enable
ASPM link state
Endpoint framework:
- Move dra7xx and tegra194 linkup processing from hard IRQ to
threaded IRQ handler
- Add a separate lock for endpoint controller list of endpoint
function drivers to prevent deadlock in callbacks
- Pass events from endpoint controller to endpoint function drivers
via callbacks instead of notifiers
Synopsys DesignWare eDMA controller driver (acked by Vinod):
- Fix CPU vs PCI address issues
- Fix source vs destination address issues
- Fix issues with interleaved transfer semantics
- Fix channel count initialization issue (issue still exists in
several other drivers)
- Clean up and improve debugfs usage so it will work on platforms
with several eDMA devices
Baikal T-1 PCIe controller driver:
- Set a 64-bit DMA mask
Freescale i.MX6 PCIe controller driver:
- Add i.MX8MM, i.MX8MQ, i.MX8MP endpoint mode DT binding and driver
support
Intel VMD host bridge driver:
- Add quirk to configure PCIe ASPM and LTR. This is normally done by
BIOS, and will be for future products
Marvell MVEBU PCIe controller driver:
- Mark this driver as broken in Kconfig since bugs prevent its daily
usage
MediaTek MT7621 PCIe controller driver:
- Delay PHY port initialization to improve boot reliability for ZBT
WE1326, ZBT WF3526-P, and some Netgear models
Qualcomm PCIe controller driver:
- Add MSM8998 DT compatible string
- Unify MSM8996 and MSM8998 clock orderings
- Add SM8350 DT binding and driver support
- Add IPQ8074 Gen3 DT binding and driver support
- Correct qcom,perst-regs in DT binding
- Add qcom_pcie_host_deinit() so the PHY is powered off and
regulators and clocks are disabled on late host-init errors
Socionext UniPhier Pro5 controller driver:
- Clean up uniphier-ep reg, clocks, resets, and their names in DT
binding
Synopsys DesignWare PCIe controller driver:
- Restrict coherent DMA mask to 32 bits for MSI, but allow controller
drivers to set 64-bit streaming DMA mask
- Add eDMA engine support in both Root Port and Endpoint controllers
Miscellaneous:
- Remove MODULE_LICENSE from boolean drivers so they don't look like
modules so modprobe can complain about them"
* tag 'pci-v6.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (86 commits)
PCI: dwc: Add Root Port and Endpoint controller eDMA engine support
PCI: bt1: Set 64-bit DMA mask
PCI: dwc: Restrict only coherent DMA mask for MSI address allocation
dmaengine: dw-edma: Prepare dw_edma_probe() for builtin callers
dmaengine: dw-edma: Depend on DW_EDMA instead of selecting it
dmaengine: dw-edma: Add mem-mapped LL-entries support
PCI: Remove MODULE_LICENSE so boolean drivers don't look like modules
PCI: hv: Drop duplicate PCI_MSI dependency
PCI/P2PDMA: Annotate RCU dereference
PCI/sysfs: Constify struct kobj_type pci_slot_ktype
PCI: hotplug: Allow marking devices as disconnected during bind/unbind
PCI: pciehp: Add Qualcomm quirk for Command Completed erratum
PCI: qcom: Add IPQ8074 Gen3 port support
dt-bindings: PCI: qcom: Add IPQ8074 Gen3 port
dt-bindings: PCI: qcom: Sort compatibles alphabetically
PCI: qcom: Fix host-init error handling
PCI: qcom: Add SM8350 support
dt-bindings: PCI: qcom: Add SM8350
dt-bindings: PCI: qcom-ep: Correct qcom,perst-regs
dt-bindings: PCI: qcom: Unify MSM8996 and MSM8998 clock order
...
Linus Torvalds [Fri, 24 Feb 2023 23:11:03 +0000 (15:11 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Quite a small cycle this time, even with the rc8. I suppose everyone
went to sleep over xmas.
- Minor driver updates for hfi1, cxgb4, erdma, hns, irdma, mlx5, siw,
mana
- inline CQE support for hns
- Have mlx5 display device error codes
- Pinned DMABUF support for irdma
- Continued rxe cleanups, particularly converting the MRs to use
xarray
- Improvements to what can be cached in the mlx5 mkey cache"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (61 commits)
IB/mlx5: Extend debug control for CC parameters
IB/hfi1: Fix sdma.h tx->num_descs off-by-one errors
IB/hfi1: Fix math bugs in hfi1_can_pin_pages()
RDMA/irdma: Add support for dmabuf pin memory regions
RDMA/mlx5: Use query_special_contexts for mkeys
net/mlx5e: Use query_special_contexts for mkeys
net/mlx5: Change define name for 0x100 lkey value
net/mlx5: Expose bits for querying special mkeys
RDMA/rxe: Fix missing memory barriers in rxe_queue.h
RDMA/mana_ib: Fix a bug when the PF indicates more entries for registering memory on first packet
RDMA/rxe: Remove rxe_alloc()
RDMA/cma: Distinguish between sockaddr_in and sockaddr_in6 by size
Subject: RDMA/rxe: Handle zero length rdma
iw_cxgb4: Fix potential NULL dereference in c4iw_fill_res_cm_id_entry()
RDMA/mlx5: Use rdma_umem_for_each_dma_block()
RDMA/umem: Remove unused 'work' member from struct ib_umem
RDMA/irdma: Cap MSIX used to online CPUs + 1
RDMA/mlx5: Check reg_create() create for errors
RDMA/restrack: Correct spelling
RDMA/cxgb4: Fix potential null-ptr-deref in pass_establish()
...
Linus Torvalds [Fri, 24 Feb 2023 22:34:12 +0000 (14:34 -0800)]
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"Some polishing and small fixes for iommufd:
- Remove IOMMU_CAP_INTR_REMAP, instead rely on the interrupt
subsystem
- Use GFP_KERNEL_ACCOUNT inside the iommu_domains
- Support VFIO_NOIOMMU mode with iommufd
- Various typos
- A list corruption bug if HWPTs are used for attach"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Do not add the same hwpt to the ioas->hwpt_list twice
iommufd: Make sure to zero vfio_iommu_type1_info before copying to user
vfio: Support VFIO_NOIOMMU with iommufd
iommufd: Add three missing structures in ucmd_buffer
selftests: iommu: Fix test_cmd_destroy_access() call in user_copy
iommu: Remove IOMMU_CAP_INTR_REMAP
irq/s390: Add arch_is_isolated_msi() for s390
iommu/x86: Replace IOMMU_CAP_INTR_REMAP with IRQ_DOMAIN_FLAG_ISOLATED_MSI
genirq/msi: Rename IRQ_DOMAIN_MSI_REMAP to IRQ_DOMAIN_ISOLATED_MSI
genirq/irqdomain: Remove unused irq_domain_check_msi_remap() code
iommufd: Convert to msi_device_has_isolated_msi()
vfio/type1: Convert to iommu_group_has_isolated_msi()
iommu: Add iommu_group_has_isolated_msi()
genirq/msi: Add msi_device_has_isolated_msi()
Linus Torvalds [Fri, 24 Feb 2023 21:40:13 +0000 (13:40 -0800)]
Merge tag 'iommu-updates-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Consolidate iommu_map/unmap functions.
There have been blocking and atomic variants so far, but that was
problematic as this approach does not scale with required new
variants which just differ in the GFP flags used. So Jason
consolidated this back into single functions that take a GFP
parameter.
- Retire the detach_dev() call-back in iommu_ops
- Arm SMMU updates from Will:
- Device-tree binding updates:
- Cater for three power domains on SM6375
- Document existing compatible strings for Qualcomm SoCs
- Tighten up clocks description for platform-specific
compatible strings
- Enable Qualcomm workarounds for some additional platforms that
need them
- Intel VT-d updates from Lu Baolu:
- Add Intel IOMMU performance monitoring support
- Set No Execute Enable bit in PASID table entry
- Two performance optimizations
- Fix PASID directory pointer coherency
- Fix missed rollbacks in error path
- Cleanups
- Renesas IPMMU:
- Add device tree bindings for r8a779g0
- AMD IOMMU:
- Various fixes for handling on SNP-enabled systems and
handling of faults with unknown request-ids
- Cleanups and other small fixes
- Various other smaller fixes and cleanups
* tag 'iommu-updates-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (71 commits)
iommu/amd: Skip attach device domain is same as new domain
iommu: Attach device group to old domain in error path
iommu/vt-d: Allow to use flush-queue when first level is default
iommu/vt-d: Fix PASID directory pointer coherency
iommu/vt-d: Avoid superfluous IOTLB tracking in lazy mode
iommu/vt-d: Fix error handling in sva enable/disable paths
iommu/amd: Improve page fault error reporting
iommu/amd: Do not identity map v2 capable device when snp is enabled
iommu: Fix error unwind in iommu_group_alloc()
iommu/of: mark an unused function as __maybe_unused
iommu: dart: DART_T8110_ERROR range should be 0 to 5
iommu/vt-d: Enable IOMMU perfmon support
iommu/vt-d: Add IOMMU perfmon overflow handler support
iommu/vt-d: Support cpumask for IOMMU perfmon
iommu/vt-d: Add IOMMU perfmon support
iommu/vt-d: Support Enhanced Command Interface
iommu/vt-d: Retrieve IOMMU perfmon capability information
iommu/vt-d: Support size of the register set in DRHD
iommu/vt-d: Set No Execute Enable bit in PASID table entry
iommu/vt-d: Remove sva from intel_svm_dev
...
- Use strscpy() to instead of strncpy() in DT core
- Add option for schema validation on %.dtb targets
Bindings:
- Add/fix support for listing multiple patterns in DT_SCHEMA_FILES
- Rework external memory controller/bus bindings to properly support
controller specific child node properties
- Convert loongson,ls1x-intc, fcs,fusb302, sil,sii8620, Rockchip
RK3399 PCIe, Synquacer I2C, and Synquacer EXIU bindings to DT
schema format
- Add RiscV SBI PMU event mapping binding
- Add missing contraints on Arm SCMI child node allowed properties
- Add a bunch of missing Socionext UniPhier glue block bindings and
example fixes
- Various fixes for duplicate or conflicting type definitions on DT
properties"
* tag 'devicetree-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (66 commits)
dt-bindings: regulator: Add mps,mpq7932 power-management IC
of: dynamic: Fix spelling mistake "kojbect" -> "kobject"
dt-bindings: drop Sagar Kadam from SiFive binding maintainership
dt-bindings: sram: qcom,imem: document sm8450
dt-bindings: interrupt-controller: convert loongson,ls1x-intc.txt to json-schema
dt-bindings: arm: Add Cortex-A715 and X3
of: dynamic: add lifecycle docbook info to node creation functions
of: add consistency check to of_node_release()
of: do not use "%pOF" printk format on node with refcount of zero
of: unittest: add node lifecycle tests
of: update kconfig unittest help
of: add processing of EXPECT_NOT to of_unittest_expect
of: prepare to add processing of EXPECT_NOT to of_unittest_expect
of: Use preferred of_property_read_* functions
of: Use of_property_present() helper
of: Add of_property_present() helper
of: reserved_mem: Use proper binary prefix
dt-bindings: Fix multi pattern support in DT_SCHEMA_FILES
of: reserved-mem: print out reserved-mem details during boot
dt-bindings: serial: restrict possible child node names
...
Linus Torvalds [Fri, 24 Feb 2023 20:58:55 +0000 (12:58 -0800)]
Merge tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work
falls into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be
moved into read-only memory (i.e. const) The recent work with Rust
has pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only
making things safer overall. This is the contuation of that work
(started last release with kobject changes) in moving struct
bus_type to be constant. We didn't quite make it for this release,
but the remaining patches will be finished up for the release after
this one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems"
[ Geert Uytterhoeven points out that that last sentence isn't true, and
that there's a pending report that has a fix that is queued up - Linus ]
* tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits)
debugfs: drop inline constant formatting for ERR_PTR(-ERROR)
OPP: fix error checking in opp_migrate_dentry()
debugfs: update comment of debugfs_rename()
i3c: fix device.h kernel-doc warnings
dma-mapping: no need to pass a bus_type into get_arch_dma_ops()
driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place
Revert "driver core: add error handling for devtmpfs_create_node()"
Revert "devtmpfs: add debug info to handle()"
Revert "devtmpfs: remove return value of devtmpfs_delete_node()"
driver core: cpu: don't hand-override the uevent bus_type callback.
devtmpfs: remove return value of devtmpfs_delete_node()
devtmpfs: add debug info to handle()
driver core: add error handling for devtmpfs_create_node()
driver core: bus: update my copyright notice
driver core: bus: add bus_get_dev_root() function
driver core: bus: constify bus_unregister()
driver core: bus: constify some internal functions
driver core: bus: constify bus_get_kset()
driver core: bus: constify bus_register/unregister_notifier()
driver core: remove private pointer from struct bus_type
...
Linus Torvalds [Fri, 24 Feb 2023 20:47:33 +0000 (12:47 -0800)]
Merge tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the large set of driver changes for char/misc drivers and
other smaller driver subsystems that flow through this git tree.
Included in here are:
- New IIO drivers and features and improvments in that subsystem
- New hwtracing drivers and additions to that subsystem
- lots of interconnect changes and new drivers as that subsystem
seems under very active development recently. This required also
merging in the icc subsystem changes through this tree.
- FPGA driver updates
- counter subsystem and driver updates
- MHI driver updates
- nvmem driver updates
- documentation updates
- Other smaller driver updates and fixes, full details in the
shortlog
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (223 commits)
scripts/tags.sh: fix incompatibility with PCRE2
firmware: coreboot: Remove GOOGLE_COREBOOT_TABLE_ACPI/OF Kconfig entries
mei: lower the log level for non-fatal failed messages
mei: bus: disallow driver match while dismantling device
misc: vmw_balloon: fix memory leak with using debugfs_lookup()
nvmem: stm32: fix OPTEE dependency
dt-bindings: nvmem: qfprom: add IPQ8074 compatible
nvmem: qcom-spmi-sdam: register at device init time
nvmem: rave-sp-eeprm: fix kernel-doc bad line warning
nvmem: stm32: detect bsec pta presence for STM32MP15x
nvmem: stm32: add OP-TEE support for STM32MP13x
nvmem: core: use nvmem_add_one_cell() in nvmem_add_cells_from_of()
nvmem: core: add nvmem_add_one_cell()
nvmem: core: drop the removal of the cells in nvmem_add_cells()
nvmem: core: move struct nvmem_cell_info to nvmem-provider.h
nvmem: core: add an index parameter to the cell
of: property: add #nvmem-cell-cells property
of: property: make #.*-cells optional for simple props
of: base: add of_parse_phandle_with_optional_args()
net: add helper eth_addr_add()
...
Linus Torvalds [Fri, 24 Feb 2023 20:25:55 +0000 (12:25 -0800)]
Merge tag 'staging-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the "boring" staging driver update for 6.3-rc1.
Nothing major in here at all, it's just lots of tiny code cleanups to
bring some of the staging drivers more in line with the real portion
of the kernel (apis and coding style.) Overall we remove more lines of
code than we add, always a nice result.
The big work was done by Martin Kaiser and Philipp Hortmann, both
tackling some of the older wifi drivers, removing unused code and
structures and a file in one case.
Full details of the changes are in the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (219 commits)
staging: r8188eu: Revert "staging: r8188eu: simplify rtw_get_ff_hwaddr"
staging: r8188eu: replace hand coded loop with list_for_each_entry
staging: r8188eu: merge _rtw_enqueue_cmd into its caller
most: add maintainer entry
staging: rtl8192e: Use BIT() instead of << for bit field MSR_LINK_MASK
staging: rtl8192e: Rename DM_RxPathSelTable
staging: rtl8192e: Rename diff_TH and disabledRF
staging: rtl8192e: Rename Enable, cck_Rx_path and SS_TH_low
staging: rtl8192e: Rename RateAdaptiveTH.., VeryLowRSSI and WAIotTHVal
staging: rtl8192e: Rename RxPathSelectio.., RateAdaptive.. and RateAdap..
staging: rtl8192e: Rename OFDM_Table.., CCK_Table_.. and RxPathSelecti..
staging: rtl8192e: Rename MacBlkCtrl and remove double definition
staging: rtl8192e: Remove blank lines in r8192E_hw.h, rtl_core.h and ..
staging: rtl8192e: Rename AcmHw_ViqEn, AcmHw_VoqEn and ANAPAR_FOR_8192PciE
staging: r8188eu: bagg_pkt parameter is not used
staging: r8188eu: simplify rtw_get_ff_hwaddr
staging: r8188eu: simplify xmit_buf flags
staging: r8188eu: xmit_buf's ff_hwaddr is not used
staging: r8188eu: remove unused frametag defines
staging: r8188eu: simplify rtw_alloc_xmitframe
...
which is due to bio->bi_bdev being NULL. This can happen if we have two
tasks doing polled IO, and task B ends up completing IO from task A if
they are sharing a poll queue. If task B completes the IO and puts the
bio into our cache, then it can allocate that bio again before task A
is done polling for it. As that would necessitate a preempt between the
two tasks, it's enough to just be a bit more careful in checking for
whether or not bio->bi_bdev is NULL.
Jens Axboe [Fri, 24 Feb 2023 16:59:44 +0000 (09:59 -0700)]
block: clear bio->bi_bdev when putting a bio back in the cache
This isn't strictly needed in terms of correctness, but it does allow
polling to know if the bio has been put already by a different task
and hence avoid polling something that we don't need to.
Linus Torvalds [Fri, 24 Feb 2023 20:17:14 +0000 (12:17 -0800)]
Merge tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of serial and tty driver updates for 6.3-rc1.
Once again, Jiri and Ilpo have done a number of core vt and tty/serial
layer cleanups that were much needed and appreciated. Other than that,
it's just a bunch of little tty/serial driver updates:
- qcom-geni-serial driver updates
- liteuart driver updates
- hvcs driver cleanups
- n_gsm updates and additions for new features
- more 8250 device support added
- fpga/dfl update and additions
- imx serial driver updates
- fsl_lpuart updates
- other tiny fixes and updates for serial drivers
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (143 commits)
tty: n_gsm: add keep alive support
serial: imx: remove a redundant check
dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties
soc: qcom: geni-se: Move qcom-geni-se.h to linux/soc/qcom/geni-se.h
tty: n_gsm: add TIOCMIWAIT support
tty: n_gsm: add RING/CD control support
tty: n_gsm: mark unusable ioctl structure fields accordingly
serial: imx: get rid of registers shadowing
serial: imx: refine local variables in rxint()
serial: imx: stop using USR2 in FIFO reading loop
serial: imx: remove redundant USR2 read from FIFO reading loop
serial: imx: do not break from FIFO reading loop prematurely
serial: imx: do not sysrq broken chars
serial: imx: work-around for hardware RX flood
serial: imx: factor-out common code to imx_uart_soft_reset()
serial: 8250_pci1xxxx: Add power management functions to quad-uart driver
serial: 8250_pci1xxxx: Add RS485 support to quad-uart driver
serial: 8250_pci1xxxx: Add driver for quad-uart support
serial: 8250_pci: Add serial8250_pci_setup_port definition in 8250_pcilib.c
tty: pcn_uart: fix memory leak with using debugfs_lookup()
...
David Lamparter [Fri, 24 Feb 2023 15:01:24 +0000 (16:01 +0100)]
io_uring: remove MSG_NOSIGNAL from recvmsg
MSG_NOSIGNAL is not applicable for the receiving side, SIGPIPE is
generated when trying to write to a "broken pipe". AF_PACKET's
packet_recvmsg() does enforce this, giving back EINVAL when MSG_NOSIGNAL
is set - making it unuseable in io_uring's recvmsg.
Jens Axboe [Fri, 24 Feb 2023 16:54:57 +0000 (09:54 -0700)]
io_uring/rsrc: always initialize 'folio' to NULL
Smatch complains that:
smatch warnings:
io_uring/rsrc.c:1262 io_sqe_buffer_register() error: uninitialized symbol 'folio'.
'folio' may be used uninitialized, which can happen if we end up with a
single page mapped. Ensure that we clear folio to NULL at the top so
it's always set.
Jakub Kicinski [Thu, 23 Feb 2023 18:31:40 +0000 (10:31 -0800)]
tools: ynl-gen: re-raise the exception instead of printing
traceback.print_exception() seems tricky to call, we're missing
some argument, so re-raise instead.
Reported-by: Chuck Lever III <[email protected]> Fixes: 3aacf8281336 ("tools: ynl: add an object hierarchy to represent parsed spec") Signed-off-by: Jakub Kicinski <[email protected]>
Jakub Kicinski [Thu, 23 Feb 2023 18:31:39 +0000 (10:31 -0800)]
tools: ynl-gen: fix single attribute structs with attr 0 only
Chuck run into an issue with a single-element attr-set which
only has an attr with value of 0. The search for max attr in
a struct records attrs with value larger than 0 only (max_val
is set to 0 at the start). Adjust the comparison, alternatively
max_val could be init'ed to -1. Somehow picking the last attr
of a value seems like a good idea in general.
Reported-by: Chuck Lever III <[email protected]> Fixes: be5bea1cc0bf ("net: add basic C code generators for Netlink") Signed-off-by: Jakub Kicinski <[email protected]>
David Howells [Fri, 24 Feb 2023 14:31:15 +0000 (14:31 +0000)]
cifs: Fix cifs_writepages_region()
Fix the cifs_writepages_region() to just jump over members of the batch
that have been cleaned up rather than counting them as skipped.
Unlike the other "skip_write" cases, this situation happens even for
WB_SYNC_ALL, simply because the page has either been cleaned by somebody
else, or was truncated.
So in this case we're not "skipping" the write, we simply no longer need
any write at all, so it's very different from the other skip_write cases.
And we definitely shouldn't stop writing the rest just because of too
many of these cases (or because we want to be rescheduled).
Maor Dickman [Wed, 8 Feb 2023 15:44:06 +0000 (17:44 +0200)]
net/mlx5: Geneve, Fix handling of Geneve object id as error code
On success, mlx5_geneve_tlv_option_create returns non negative
Geneve object id. In case the object id is positive value the
caller functions will handle it as an error (non zero) and
will fail to offload the Geneve rule.
Fix this by changing caller function ,mlx5_geneve_tlv_option_add,
to return 0 in case valid non negative object id was provided.
Maher Sanalla [Wed, 15 Feb 2023 18:12:05 +0000 (20:12 +0200)]
net/mlx5: ECPF, wait for VF pages only after disabling host PFs
Currently, during the early stages of their unloading, particularly
during SRIOV disablement, PFs/ECPFs wait on the release of all of
their VFs memory pages. Furthermore, ECPFs are considered the page
supplier for host VFs, hence the host VFs memory pages are freed only
during ECPF cleanup when host interfaces get disabled.
Thus, disabling SRIOV early in unload timeline causes the DPU ECPF
to stall on driver unload while waiting on the release of host VF pages
that won't be freed before host interfaces get disabled later on.
Therefore, for ECPFs, wait on the release of VFs pages only after the
disablement of host PFs during ECPF cleanup flow. Then, host PFs and VFs
are disabled and their memory shall be freed accordingly.
Vadim Fedorenko [Thu, 2 Feb 2023 17:13:55 +0000 (09:13 -0800)]
mlx5: fix possible ptp queue fifo use-after-free
Fifo indexes are not checked during pop operations and it leads to
potential use-after-free when poping from empty queue. Such case was
possible during re-sync action. WARN_ON_ONCE covers future cases.
There were out-of-order cqe spotted which lead to drain of the queue and
use-after-free because of lack of fifo pointers check. Special check and
counter are added to avoid resync operation if SKB could not exist in the
fifo because of OOO cqe (skb_id must be between consumer and producer
index).
Fixes: 58a518948f60 ("net/mlx5e: Add resiliency for PTP TX port timestamp") Signed-off-by: Vadim Fedorenko <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
Vadim Fedorenko [Thu, 2 Feb 2023 17:13:54 +0000 (09:13 -0800)]
mlx5: fix skb leak while fifo resync and push
During ptp resync operation SKBs were poped from the fifo but were never
freed neither by napi_consume nor by dev_kfree_skb_any. Add call to
napi_consume_skb to properly free SKBs.
Another leak was happening because mlx5e_skb_fifo_has_room() had an error
in the check. Comparing free running counters works well unless C promotes
the types to something wider than the counter. In this case counters are
u16 but the result of the substraction is promouted to int and it causes
wrong result (negative value) of the check when producer have already
overlapped but consumer haven't yet. Explicit cast to u16 fixes the issue.
Yang Li [Wed, 22 Feb 2023 02:29:44 +0000 (10:29 +0800)]
net/mlx5: Remove NULL check before dev_{put, hold}
The call netdev_{put, hold} of dev_{put, hold} will check NULL,
so there is no need to check before using dev_{put, hold},
remove it to silence the warning：
./drivers/net/ethernet/mellanox/mlx5/core/en/rep/tc.c:714:2-9: WARNING: NULL check before dev_{put, hold} functions is not needed.
Sudeep Holla [Thu, 23 Feb 2023 13:57:42 +0000 (13:57 +0000)]
arm64: acpi: Fix possible memory leak of ffh_ctxt
Allocated 'ffh_ctxt' memory leak is possible if the SMCCC version
and conduit checks fail and -EOPNOTSUPP is returned without freeing the
allocated memory.
Fix the same by moving the allocation after the SMCCC version and
conduit checks.
Revert the HUGETLB_PAGE_FREE_VMEMMAP selection from commit 1e63ac088f20
("arm64: mm: hugetlb: enable HUGETLB_PAGE_FREE_VMEMMAP for arm64") but
keep the flush_dcache_page() compound_head() change as it aligns with
the corresponding check in the __sync_icache_dcache() function.
The original config option was renamed in commit 47010c040dec ("mm:
hugetlb_vmemmap: cleanup CONFIG_HUGETLB_PAGE_FREE_VMEMMAP*") to
HUGETLB_PAGE_OPTIMIZE_VMEMMAP and the flush_dcache_page() check was
further simplified by commit 2da1c30929a2 ("mm: hugetlb_vmemmap: delete
hugetlb_optimize_vmemmap_enabled()").
The reason for the revert is that the generic vmemmap_remap_pte()
function changes both the permissions (writeable to read-only) and the
output address (pfn) of the vmemmap ptes. This is deemed UNPREDICTABLE
by the Arm architecture without a break-before-make sequence (make the
PTE invalid, TLBI, write the new valid PTE). However, such sequence is
not possible since the vmemmap may be concurrently accessed by the
kernel. Disable the optimisation until a better solution is found.
We are supposed to set fid->mode to reflect the flags
that were used to open the file. We were actually setting
it to the creation mode which is the default perms of the
file not the flags the file was opened with.
Zhengchao Shao [Wed, 4 Jan 2023 02:04:24 +0000 (10:04 +0800)]
9p/rdma: unmap receive dma buffer in rdma_request()/post_recv()
When down_interruptible() or ib_post_send() failed in rdma_request(),
receive dma buffer is not unmapped. Add unmap action to error path.
Also if ib_post_recv() failed in post_recv(), dma buffer is not unmapped.
Add unmap action to error path.
Juergen Gross [Mon, 30 Jan 2023 11:30:36 +0000 (12:30 +0100)]
9p/xen: fix connection sequence
Today the connection sequence of the Xen 9pfs frontend doesn't match
the documented sequence. It can work reliably only for a PV 9pfs device
having been added at boot time already, as the frontend is not waiting
for the backend to have set its state to "XenbusStateInitWait" before
reading the backend properties from Xenstore.
Fix that by following the documented sequence [1] (the documentation
has a bug, so the reference is for the patch fixing that).
Juergen Gross [Mon, 30 Jan 2023 11:30:35 +0000 (12:30 +0100)]
9p/xen: fix version parsing
When connecting the Xen 9pfs frontend to the backend, the "versions"
Xenstore entry written by the backend is parsed in a wrong way.
The "versions" entry is defined to contain the versions supported by
the backend separated by commas (e.g. "1,2"). Today only version "1"
is defined. Unfortunately the frontend doesn't look for "1" being
listed in the entry, but it is expecting the entry to have the value
"1".
This will result in failure as soon as the backend will support e.g.
versions "1" and "2".
Fixes: d3d854fd6a1d ("netdev-genl: create a simple family for netdev stuff") Signed-off-by: Tariq Toukan <[email protected]> Acked-by: Lorenzo Bianconi <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Linus Torvalds [Fri, 24 Feb 2023 01:55:40 +0000 (17:55 -0800)]
Merge tag 'mm-nonmm-stable-2023-02-20-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"There is no particular theme here - mainly quick hits all over the
tree.
Most notable is a set of zlib changes from Mikhail Zaslonko which
enhances and fixes zlib's use of S390 hardware support: 'lib/zlib: Set
of s390 DFLTCC related patches for kernel zlib'"
* tag 'mm-nonmm-stable-2023-02-20-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (55 commits)
Update CREDITS file entry for Jesper Juhl
sparc: allow PM configs for sparc32 COMPILE_TEST
hung_task: print message when hung_task_warnings gets down to zero.
arch/Kconfig: fix indentation
scripts/tags.sh: fix the Kconfig tags generation when using latest ctags
nilfs2: prevent WARNING in nilfs_dat_commit_end()
lib/zlib: remove redundation assignement of avail_in dfltcc_gdht()
lib/Kconfig.debug: do not enable DEBUG_PREEMPT by default
lib/zlib: DFLTCC always switch to software inflate for Z_PACKET_FLUSH option
lib/zlib: DFLTCC support inflate with small window
lib/zlib: Split deflate and inflate states for DFLTCC
lib/zlib: DFLTCC not writing header bits when avail_out == 0
lib/zlib: fix DFLTCC ignoring flush modes when avail_in == 0
lib/zlib: fix DFLTCC not flushing EOBS when creating raw streams
lib/zlib: implement switching between DFLTCC and software
lib/zlib: adjust offset calculation for dfltcc_state
nilfs2: replace WARN_ONs for invalid DAT metadata block requests
scripts/spelling.txt: add "exsits" pattern and fix typo instances
fs: gracefully handle ->get_block not mapping bh in __mpage_writepage
cramfs: Kconfig: fix spelling & punctuation
...
Linus Torvalds [Fri, 24 Feb 2023 01:09:35 +0000 (17:09 -0800)]
Merge tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
Song Chen [Fri, 30 Dec 2022 06:33:53 +0000 (14:33 +0800)]
kernel/trace: extract common part in process_fetch_insn
Each probe has an instance of process_fetch_insn respectively,
but they have something in common.
This patch aims to extract the common part into
process_common_fetch_insn which can be shared by each probe,
and they only need to focus on their special cases.
Every C file which includes trace_probe_tmpl.h has to implement them,
otherwise it gets warnings and errors. However, some of them are identical,
like kprobe and eprobe, as a result, there is a lot redundant code in those
2 files.
This patch would like to provide default behaviors for those functions
which kprobe and eprobe can share by just including trace_probe_kernel.h
with trace_probe_tmpl.h together.
It removes redundant code, increases readability, and more importantly,
makes it easier to introduce a new feature based on trace probe
(it's possible).
Deepak R Varma [Wed, 22 Feb 2023 13:28:48 +0000 (18:58 +0530)]
octeontx2-pf: Use correct struct reference in test condition
Fix the typo/copy-paste error by replacing struct variable ah_esp_mask name
by ah_esp_hdr.
Issue identified using doublebitand.cocci Coccinelle semantic patch.
Linus Torvalds [Thu, 23 Feb 2023 23:09:31 +0000 (15:09 -0800)]
Merge tag 'leds-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"Removed Drivers:
- HTC ASIC3 LED
New Functionality:
- Provide generic led_get() which can be used by both DT and !DT
platforms
Fix-ups:
- Convert a bunch of I2C subsystem users to the new probing API
- Explicitly provide missing include files
- Make use of led_init_default_state_get() and rid the custom
variants
- Use simplified fwnode_device_is_compatible() API
- Provide some Device Tree additions / adaptions
- Fix some trivial spelling issues
Bug Fixes:
- Prevent device refcount leak during led_put() and of_led_get()
- Clear previous data from temporary led_pwm structure before
processing next child
- Fix Clang's warning about incompatible function types when using
devm_add_action*()"
* tag 'leds-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (41 commits)
leds: Remove ide-disk trigger
dt-bindings: leds: Add disk write/read and usb-host/usb-gadget
Documentation: leds: Correct spelling
dt-bindings: leds: Document Bluetooth and WLAN triggers
leds: Remove asic3 driver
leds: simatic-ipc-leds-gpio: Make sure we have the GPIO providing driver
leds: tca6507: Convert to use fwnode_device_is_compatible()
leds: syscon: Get rid of custom led_init_default_state_get()
leds: pm8058: Get rid of custom led_init_default_state_get()
leds: pca955x: Get rid of custom led_init_default_state_get()
leds: mt6360: Get rid of custom led_init_default_state_get()
leds: mt6323: Get rid of custom led_init_default_state_get()
leds: bcm6358: Get rid of custom led_init_default_state_get()
leds: bcm6328: Get rid of custom led_init_default_state_get()
leds: an30259a: Get rid of custom led_init_default_state_get()
leds: Move led_init_default_state_get() to the global header
leds: Add missing includes and forward declarations in leds.h
leds: is31fl319x: Wrap mutex_destroy() for devm_add_action_or_rest()
leds: turris-omnia: Convert to i2c's .probe_new()
leds: tlc591xx: Convert to i2c's .probe_new()
...
Linus Torvalds [Thu, 23 Feb 2023 23:06:28 +0000 (15:06 -0800)]
Merge tag 'backlight-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Drivers:
- Add support for Kinetic KTZ8866 Backlight
Removed Drivers:
- Toshiba Sharp SL-6000 LCD and Backlight
Fix-ups:
- Provide some profiling optimisations with respect to
pwm_get_state() and pwm_apply_state()
- Make use of the dev_err_probe() API
- Provide some Device Tree documentation additions / adaptions
- Drop fall-back legacy PWM probing support
- Convert over to new I2C probing API
- Fix incorrect documentation
- Make use of backlight_get_brightness() API
Bug Fixes:
- Fix disabling backlight on i.MX6 when inverted PWMs are used"
* tag 'backlight-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: ktz8866: Convert to i2c's .probe_new()
backlight: ktz8866: Add support for Kinetic KTZ8866 backlight
dt-bindings: leds: backlight: Add Kinetic KTZ8866 backlight
backlight: pwm_bl: Don't rely on a disabled PWM emiting inactive state
backlight: pwm_bl: Configure pwm only once per backlight toggle
backlight: Remove pxa tosa support
backlight: aat2870: Use backlight helper
backlight: ipaq_micro: Use backlight helper
backlight: arcxcnn: Use backlight helper
backlight: sky81452: Fix sky81452_bl_platform_data kernel-doc
backlight: pwm_bl: Drop support for legacy PWM probing
dt-bindings: backlight: qcom-wled: Add PMI8950 compatible
backlight: ktd253: Switch to use dev_err_probe() helper
backlight: backlight: Fix doc for backlight_device_get_by_name
New Device Support:
- Add support for N6000 Flash to Intel M10 BMC PMCI
- Add support for Lenovo Yoga Tab 3 to Intel CHTWC PMIC
New Functionality:
- Provide Reset support to Syscon
Fix-ups:
- Explicitly provide missing include files
- Pass platform type data/info via the SPI/I2C/DT registration
strategy
- Lots of DT documentation / adaptions
- Replace scnprintf() with preferred sysfs_emit()
- Remove unused / superfluous code
- Fix some trivial whitesspace / spelling / grammatical issues
- Replace pm_power_off with new and improved
register_sys_off_handler() API
Bug Fixes:
- Reintroduce RK808-clkout registration - fixing Wi-Fi and Bluetooth
- Repair the order of AXPxxx IRQ PEK RISE/FALL definitions
- Refuse to build CS5535 on unsupported UML architectures
- Fix memory leaks in error return paths
- Prevent refcount leaks in error return paths"
* tag 'mfd-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (40 commits)
dt-bindings: mfd: qcom,tcsr: Add compatible for IPQ5332
dt-bindings: mfd: Add NXP BBNSM
mfd: ntxec: Add version number for EC in Tolino Vision
dt-bindings: mfd: syscon: Add mt8365-syscfg
mfd: Remove toshiba tmio drivers
mfd: arizona: Use pm_runtime_resume_and_get() to prevent refcnt leak
mfd: syscon: Allow reset control for syscon devices
dt-bindings: mfd/syscon: Add resets property
dt-bindings: mfd: syscon: Add amd,pensando-elba-syscon compatible
dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8226
mfd: simple-mfd-i2c: Fix incoherent comment regarding DT registration
mfd: axp20x: Switch to the sys-off handler API
mfd: core: Spelling s/compement/complement/
mfd: max8925: Remove the unused function irq_to_max8925()
mfd: qcom-pm8xxx: Remove set but unused variable 'rev'
dt-bindings: mfd: syscon: Document GXP register compatible
mfd: twl4030-power: Drop empty platform remove function
mfd: twl: Fix TWL6032 phy vbus detection
mfd: pcf50633-adc: Fix potential memleak in pcf50633_adc_async_read()
MAINTAINERS: Move MFD from a Supported to Maintaied state
...
Sean Anderson [Thu, 22 Dec 2022 21:45:31 +0000 (16:45 -0500)]
rtc: abx80x: Add nvmem support
This adds support for the 256-byte internal RAM. There are two windows
which can be used to access this RAM: 64 bytes at 0x40 (the "standard"
address space) and 128 bytes at 0x80 (the "alternate" address space). We
use the standard address space because it is also accessible over SPI
(if such a port is ever done). We are limited to 32-byte reads for SMBus
compatibility, so there's no advantage to using the alternate address
space.
There are some reserved bits in the EXTRAM register, and the datasheet
doesn't say what to do with them. I've opted to skip a read/modify/write
and just write the whole thing. If this driver is ever converted to
regmap, this would be a good place to use regmap_update_bits.
projects / linux.git / log