Vishal Chourasia [Thu, 24 Oct 2024 05:16:09 +0000 (10:46 +0530)]
sched_ext: Fix function pointer type mismatches in BPF selftests
Fix incompatible function pointer type warnings in sched_ext BPF selftests by
explicitly casting the function pointers when initializing struct_ops.
This addresses multiple -Wincompatible-function-pointer-types warnings from the
clang compiler where function signatures didn't match exactly.
The void * cast ensures the compiler accepts the function pointer
assignment despite minor type differences in the parameters.
Ihor Solodrai [Mon, 21 Oct 2024 23:16:52 +0000 (23:16 +0000)]
selftests/sched_ext: add order-only dependency of runner.o on BPFOBJ
The runner.o may start building before libbpf headers are installed,
and as a result build fails. This happened a couple of times on
libbpf/ci test jobs:
* https://github.com/libbpf/ci/actions/runs/11447667257/job/31849533100
* https://github.com/theihor/libbpf-ci/actions/runs/11445162764/job/31841649552
Headers are installed in a recipe for $(BPFOBJ) target, and adding an
order-only dependency should ensure this doesn't happen.
David Vernet [Mon, 14 Oct 2024 17:58:30 +0000 (12:58 -0500)]
sched_ext: Remove unnecessary cpu_relax()
As described in commit b07996c7abac ("sched_ext: Don't hold
scx_tasks_lock for too long"), we're doing a cond_resched() every 32
calls to scx_task_iter_next() to avoid RCU and other stalls. That commit
also added a cpu_relax() to the codepath where we drop and reacquire the
lock, but as Waiman described in [0], cpu_relax() should only be
necessary in busy loops to avoid pounding on a cacheline (or to allow a
hypertwin to more fully utilize a core).
Tejun Heo [Thu, 10 Oct 2024 21:41:44 +0000 (11:41 -1000)]
sched_ext: Don't hold scx_tasks_lock for too long
While enabling and disabling a BPF scheduler, every task is iterated a
couple times by walking scx_tasks. Except for one, all iterations keep
holding scx_tasks_lock. On multi-socket systems under heavy rq lock
contention and high number of threads, this can can lead to RCU and other
stalls.
The following is triggered on a 2 x AMD EPYC 7642 system (192 logical CPUs)
running `stress-ng --workload 150 --workload-threads 10` with >400k idle
threads and RCU stall period reduced to 5s:
Tejun Heo [Thu, 10 Oct 2024 21:41:44 +0000 (11:41 -1000)]
sched_ext: Move scx_tasks_lock handling into scx_task_iter helpers
Iterating with scx_task_iter involves scx_tasks_lock and optionally the rq
lock of the task being iterated. Both locks can be released during iteration
and the iteration can be continued after re-grabbing scx_tasks_lock.
Currently, all lock handling is pushed to the caller which is a bit
cumbersome and makes it difficult to add lock-aware behaviors. Make the
scx_task_iter helpers handle scx_tasks_lock.
- scx_task_iter_init/scx_taks_iter_exit() now grabs and releases
scx_task_lock, respectively. Renamed to
scx_task_iter_start/scx_task_iter_stop() to more clearly indicate that
there are non-trivial side-effects.
- Add __ prefix to scx_task_iter_rq_unlock() to indicate that the function
is internal.
- Add scx_task_iter_unlock/relock(). The former drops both rq lock (if held)
and scx_tasks_lock and the latter re-locks only scx_tasks_lock.
This doesn't cause behavior changes and will be used to implement stall
avoidance.
Tejun Heo [Thu, 10 Oct 2024 21:41:44 +0000 (11:41 -1000)]
sched_ext: bypass mode shouldn't depend on ops.select_cpu()
Bypass mode was depending on ops.select_cpu() which can't be trusted as with
the rest of the BPF scheduler. Always enable and use scx_select_cpu_dfl() in
bypass mode.
Tejun Heo [Thu, 10 Oct 2024 21:41:44 +0000 (11:41 -1000)]
sched_ext: Move scx_buildin_idle_enabled check to scx_bpf_select_cpu_dfl()
Move the sanity check from the inner function scx_select_cpu_dfl() to the
exported kfunc scx_bpf_select_cpu_dfl(). This doesn't cause behavior
differences and will allow using scx_select_cpu_dfl() in bypass mode
regardless of scx_builtin_idle_enabled.
Tejun Heo [Thu, 10 Oct 2024 21:41:44 +0000 (11:41 -1000)]
sched_ext: Start schedulers with consistent p->scx.slice values
The disable path caps p->scx.slice to SCX_SLICE_DFL. As the field is already
being ignored at this stage during disable, the only effect this has is that
when the next BPF scheduler is loaded, it won't see unreasonable left-over
slices. Ultimately, this shouldn't matter but it's better to start in a
known state. Drop p->scx.slice capping from the disable path and instead
reset it to SCX_SLICE_DFL in the enable path.
Slice length is ignored while bypassing and tasks are switched on every tick
and thus the patch does not make any difference. The perceived difference
was from test noise.
Honglei Wang [Thu, 10 Oct 2024 03:34:05 +0000 (11:34 +0800)]
sched_ext: use correct function name in pick_task_scx() warning message
pick_next_task_scx() was turned into pick_task_scx() since
commit 753e2836d139 ("sched_ext: Unify regular and core-sched pick
task paths"). Update the outdated message.
make ARCH=arm64 LLVM=1 TARGETS=sched_ext SKIP_TARGETS="" \
O=/output/foo -C tools/testing/selftests install
The expectation is that the sched_ext is included, cross-built, the
correct toolchain is picked up, and placed into /output/foo.
In contrast to the BPF selftests, the sched_ext suite does not use
bpftool at test run-time, so it is sufficient to build bpftool for the
build host only.
Add ARCH, CROSS_COMPILE, OUTPUT, and TARGETS support to the sched_ext
selftest. Also, remove some variables that were unused by the
Makefile.
sched_ext, scx_qmap: Add and use SCX_ENQ_CPU_SELECTED
scx_qmap and other schedulers in the SCX repo are using SCX_ENQ_WAKEUP to
tell whether ops.select_cpu() was called. This is incorrect as
ops.select_cpu() can be skipped in the wakeup path and leads to e.g.
incorrectly skipping direct dispatch for tasks that are bound to a single
CPU.
sched core has been updated to specify ENQUEUE_RQ_SELECTED if
->select_task_rq() was called. Map it to SCX_ENQ_CPU_SELECTED and update
scx_qmap to test it instead of SCX_ENQ_WAKEUP.
sched/core: Add ENQUEUE_RQ_SELECTED to indicate whether ->select_task_rq() was called
During ttwu, ->select_task_rq() can be skipped if only one CPU is allowed or
migration is disabled. sched_ext schedulers may perform operations such as
direct dispatch from ->select_task_rq() path and it is useful for them to
know whether ->select_task_rq() was skipped in the ->enqueue_task() path.
Currently, sched_ext schedulers are using ENQUEUE_WAKEUP for this purpose
and end up assuming incorrectly that ->select_task_rq() was called for tasks
that are bound to a single CPU or migration disabled.
Make select_task_rq() indicate whether ->select_task_rq() was called by
setting WF_RQ_SELECTED in *wake_flags and make ttwu_do_activate() map that
to ENQUEUE_RQ_SELECTED for ->enqueue_task().
This will be used by sched_ext to fix ->select_task_rq() skip detection.
sched/core: Make select_task_rq() take the pointer to wake_flags instead of value
This will be used to allow select_task_rq() to indicate whether
->select_task_rq() was called by modifying *wake_flags.
This makes try_to_wake_up() call all functions that take wake_flags with
WF_TTWU set. Previously, only select_task_rq() was. Using the same flags is
more consistent, and, as the flag is only tested by ->select_task_rq()
implementations, it doesn't cause any behavior differences.
Tejun Heo [Wed, 2 Oct 2024 20:34:38 +0000 (10:34 -1000)]
sched_ext: scx_cgroup_exit() may be called without successful scx_cgroup_init()
568894edbe48 ("sched_ext: Add scx_cgroup_enabled to gate cgroup operations
and fix scx_tg_online()") assumed that scx_cgroup_exit() is only called
after scx_cgroup_init() finished successfully. This isn't true.
scx_cgroup_exit() can be called without scx_cgroup_init() being called at
all or after scx_cgroup_init() failed in the middle.
As init state is tracked per cgroup, scx_cgroup_exit() can be used safely to
clean up in all cases. Remove the incorrect WARN_ON_ONCE().
Signed-off-by: Tejun Heo <[email protected]> Fixes: 568894edbe48 ("sched_ext: Add scx_cgroup_enabled to gate cgroup operations and fix scx_tg_online()")
Tejun Heo [Wed, 2 Oct 2024 20:33:37 +0000 (10:33 -1000)]
sched_ext: Improve error reporting during loading
When the BPF scheduler fails, ops.exit() allows rich error reporting through
scx_exit_info. Use scx.exit() path consistently for all failures which can
be caused by the BPF scheduler:
- scx_ops_error() is called after ops.init() and ops.cgroup_init() failure
to record error information.
- ops.init_task() failure now uses scx_ops_error() instead of pr_err().
- The err_disable path updated to automatically trigger scx_ops_error() to
cover cases that the error message hasn't already been generated and
always return 0 indicating init success so that the error is reported
through ops.exit().
sched_ext: Add __weak markers to BPF helper function decalarations
Fix build errors by adding __weak markers to BPF helper function
declarations in header files. This resolves static assertion failures
in scx_qmap.bpf.c and scx_flatcg.bpf.c where functions like
scx_bpf_dispatch_from_dsq_set_slice, scx_bpf_dispatch_from_dsq_set_vtime,
and scx_bpf_task_cgroup were missing the __weak attribute.
The enable path uses three big locks - scx_fork_rwsem, scx_cgroup_rwsem and
cpus_read_lock. Currently, the locks are grabbed together which is prone to
locking order problems.
For example, currently, there is a possible deadlock involving
scx_fork_rwsem and cpus_read_lock. cpus_read_lock has to nest inside
scx_fork_rwsem due to locking order existing in other subsystems. However,
there exists a dependency in the other direction during hotplug if hotplug
needs to fork a new task, which happens in some cases. This leads to the
following deadlock:
scx_ops_enable() hotplug
percpu_down_write(&cpu_hotplug_lock)
percpu_down_write(&scx_fork_rwsem)
block on cpu_hotplug_lock
kthread_create() waits for kthreadd
kthreadd blocks on scx_fork_rwsem
Note that this doesn't trigger lockdep because the hotplug side dependency
bounces through kthreadd.
With the preceding scx_cgroup_enabled change, this can be solved by
decoupling cpus_read_lock, which is needed for static_key manipulations,
from the other two locks.
- Move the first block of static_key manipulations outside of scx_fork_rwsem
and scx_cgroup_rwsem. This is now safe with the preceding
scx_cgroup_enabled change.
- Drop scx_cgroup_rwsem and scx_fork_rwsem between the two task iteration
blocks so that __scx_ops_enabled static_key enabling is outside the two
rwsems.
sched_ext: Decouple locks in scx_ops_disable_workfn()
The disable path uses three big locks - scx_fork_rwsem, scx_cgroup_rwsem and
cpus_read_lock. Currently, the locks are grabbed together which is prone to
locking order problems. With the preceding scx_cgroup_enabled change, we can
decouple them:
- As cgroup disabling no longer requires modifying a static_key which
requires cpus_read_lock(), no need to grab cpus_read_lock() before
grabbing scx_cgroup_rwsem.
- cgroup can now be independently disabled before tasks are moved back to
the fair class.
Relocate scx_cgroup_exit() invocation before scx_fork_rwsem is grabbed, drop
now unnecessary cpus_read_lock() and move static_key operations out of
scx_fork_rwsem. This decouples all three locks in the disable path.
sched_ext: Add scx_cgroup_enabled to gate cgroup operations and fix scx_tg_online()
If the BPF scheduler does not implement ops.cgroup_init(), scx_tg_online()
didn't set SCX_TG_INITED which meant that ops.cgroup_exit(), even if
implemented, won't be called from scx_tg_offline(). This is because
SCX_HAS_OP(cgroupt_init) is used to test both whether SCX cgroup operations
are enabled and ops.cgroup_init() exists.
Fix it by introducing a separate bool scx_cgroup_enabled to gate cgroup
operations and use SCX_HAS_OP(cgroup_init) only to test whether
ops.cgroup_init() exists. Make all cgroup operations consistently use
scx_cgroup_enabled to test whether cgroup operations are enabled.
scx_cgroup_enabled is added instead of using scx_enabled() to ease planned
locking updates.
scx_ops_init_task() and the follow-up scx_ops_enable_task() in the fork path
were gated by scx_enabled() test and thus __scx_ops_enabled had to be turned
on before the first scx_ops_init_task() loop in scx_ops_enable(). However,
if an external entity causes sched_class switch before the loop is complete,
tasks which are not initialized could be switched to SCX.
The following can be reproduced by running a program which keeps toggling a
process between SCHED_OTHER and SCHED_EXT using sched_setscheduler(2).
Fix it by gating scx_ops_init_task() separately using
scx_ops_init_task_enabled. __scx_ops_enabled is now set after all tasks are
finished with scx_ops_init_task().
sched_ext: Fix SCX_TASK_INIT -> SCX_TASK_READY transitions in scx_ops_enable()
scx_ops_enable() has two task iteration loops. The first one calls
scx_ops_init_task() on every task and the latter switches the eligible ones
into SCX. The first loop left the tasks in SCX_TASK_INIT state and then the
second loop switched it into READY before switching the task into SCX.
The distinction between INIT and READY is only meaningful in the fork path
where it's used to tell whether the task finished forking so that we can
tell ops.exit_task() accordingly. Leaving task in INIT state between the two
loops is incosistent with the fork path and incorrect. The following can be
triggered by running a program which keeps toggling a task between
SCHED_OTHER and SCHED_SCX while enabling a task:
scx_ops_enable() used preempt_disable() around the task iteration loop to
switch tasks into SCX to guarantee forward progress of the task which is
running scx_ops_enable(). However, in the gap between setting
__scx_ops_enabled and preeempt_disable(), an external entity can put tasks
including the enabling one into SCX prematurely, which can lead to
malfunctions including stalls.
The bypass mode can wrap the entire enabling operation and guarantee forward
progress no matter what the BPF scheduler does. Use the bypass mode instead
to guarantee forward progress while enabling.
While at it, release and regrab scx_tasks_lock between the two task
iteration locks in scx_ops_enable() for clarity as there is no reason to
keep holding the lock between them.
sched_ext: Relocate check_hotplug_seq() call in scx_ops_enable()
check_hotplug_seq() is used to detect CPU hotplug event which occurred while
the BPF scheduler is being loaded so that initialization can be retried if
CPU hotplug events take place before the CPU hotplug callbacks are online.
As such, the best place to call it is in the same cpu_read_lock() section
that enables the CPU hotplug ops. Currently, it is called in the next
cpus_read_lock() block in scx_ops_enable(). The side effect of this
placement is a small window in which hotplug sequence detection can trigger
unnecessarily, which isn't critical.
Move check_hotplug_seq() invocation to the same cpus_read_lock() block as
the hotplug operation enablement to close the window and get the invocation
out of the way for planned locking updates.
While bypassing, tasks are scheduled in FIFO order which favors tasks that
hog CPUs. This can slow down e.g. unloading of the BPF scheduler. While
bypassing, guaranteeing timely forward progress is the main goal. There's no
point in giving long slices. Shorten the time slice used while bypassing
from 20ms to 5ms.
In the bypass mode, the global DSQ is used to schedule all tasks in simple
FIFO order. All tasks are queued into the global DSQ and all CPUs try to
execute tasks from it. This creates a lot of cross-node cacheline accesses
and scheduling across the node boundaries, and can lead to live-lock
conditions where the system takes tens of minutes to disable the BPF
scheduler while executing in the bypass mode.
Split the global DSQ per NUMA node. Each node has its own global DSQ. When a
task is dispatched to SCX_DSQ_GLOBAL, it's put into the global DSQ local to
the task's CPU and all CPUs in a node only consume its node-local global
DSQ.
This resolves a livelock condition which could be reliably triggered on an
2x EPYC 7642 system by running `stress-ng --race-sched 1024` together with
`stress-ng --workload 80 --workload-threads 10` while repeatedly enabling
and disabling a SCX scheduler.
sched_ext: Allow only user DSQs for scx_bpf_consume(), scx_bpf_dsq_nr_queued() and bpf_iter_scx_dsq_new()
SCX_DSQ_GLOBAL is special in that it can't be used as a priority queue and
is consumed implicitly, but all BPF DSQ related kfuncs could be used on it.
SCX_DSQ_GLOBAL will be split per-node for scalability and those operations
won't make sense anymore. Disallow SCX_DSQ_GLOBAL on scx_bpf_consume(),
scx_bpf_dsq_nr_queued() and bpf_iter_scx_dsq_new(). This means that
SCX_DSQ_GLOBAL can only be used as a dispatch target from BPF schedulers.
With scx_flatcg, which was using SCX_DSQ_GLOBAL as the fallback DSQ,
updated, this shouldn't affect any schedulers.
This leaves find_dsq_for_dispatch() the only user of find_non_local_dsq().
Open code and remove find_non_local_dsq().
scx_flatcg: Use a user DSQ for fallback instead of SCX_DSQ_GLOBAL
scx_flatcg was using SCX_DSQ_GLOBAL for fallback handling. However, it is
assuming that SCX_DSQ_GLOBAL isn't automatically consumed, which was true a
while ago but is no longer the case. Also, there are further changes planned
for SCX_DSQ_GLOBAL which will disallow explicit consumption from it. Switch
to a user DSQ for fallback.
sched_ext: Add __COMPAT helpers for features added during v6.12 devel cycle
cgroup support and scx_bpf_dispatch[_vtime]_from_dsq() are newly added since 8bb30798fd6e ("sched_ext: Fixes incorrect type in bpf_scx_init()") which is
the current earliest commit targeted by BPF schedulers. Add compat helpers
for them and apply them in the example schedulers.
These will be dropped after a few kernel releases. The exact backward
compatibility window hasn't been decided yet.
move_remote_task_to_local_dsq() is only defined on SMP configs but
scx_disaptch_from_dsq() was calling move_remote_task_to_local_dsq() on UP
configs too causing build failures. Add a dummy
move_remote_task_to_local_dsq() which triggers a warning.
Merge tag 'kbuild-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Support cross-compiling linux-headers Debian package and kernel-devel
RPM package
- Add support for the linux-debug Pacman package
- Improve module rebuilding speed by factoring out the common code to
scripts/module-common.c
- Separate device tree build rules into scripts/Makefile.dtbs
- Add a new script to generate modules.builtin.ranges, which is useful
for tracing tools to find symbols in built-in modules
- Refactor Kconfig and misc tools
- Update Kbuild and Kconfig documentation
* tag 'kbuild-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (51 commits)
kbuild: doc: replace "gcc" in external module description
kbuild: doc: describe the -C option precisely for external module builds
kbuild: doc: remove the description about shipped files
kbuild: doc: drop section numbering, use references in modules.rst
kbuild: doc: throw out the local table of contents in modules.rst
kbuild: doc: remove outdated description of the limitation on -I usage
kbuild: doc: remove description about grepping CONFIG options
kbuild: doc: update the description about Kbuild/Makefile split
kbuild: remove unnecessary export of RUST_LIB_SRC
kbuild: remove append operation on cmd_ld_ko_o
kconfig: cache expression values
kconfig: use hash table to reuse expressions
kconfig: refactor expr_eliminate_dups()
kconfig: add comments to expression transformations
kconfig: change some expr_*() functions to bool
scripts: move hash function from scripts/kconfig/ to scripts/include/
kallsyms: change overflow variable to bool type
kallsyms: squash output_address()
kbuild: add install target for modules.builtin.ranges
scripts: add verifier script for builtin module range data
...
Merge tag 'linux-cpupower-6.12-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Pull cpupower updates from Shuah Khan
"The 'raw_pylibcpupower.i' file was being removed by "make mrproper".
That was because '*.i', '.s' and '*.o' files are generated during
kernel compile and removed when the repo is cleaned by mrproper.
Rename it to use .swg extension instead to avoid the problem.
A second patch removes references to it from .gitignore"
* tag 'linux-cpupower-6.12-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
pm: cpupower: Clean up bindings gitignore
pm: cpupower: rename raw_pylibcpupower.i
Merge tag 'i3c/for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"This adds support for the I3C HCI controller of the AMD SoC which as
expected requires quirks. Also fixes for the other drivers, including
rate selection fixes for svc.
Core:
- allow adjusting first broadcast address speed
Drivers:
- cdns: few fixes
- mipi-i3c-hci: Add AMD SoC I3C controller support and quirks, fix
get_i3c_mode
- svc: adjust rates, fix race condition"
* tag 'i3c/for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: svc: Fix use after free vulnerability in svc_i3c_master Driver Due to Race Condition
i3c: master: cdns: Fix use after free vulnerability in cdns_i3c_master Driver Due to Race Condition
i3c: master: svc: adjust SDR according to i3c spec
i3c: master: svc: use slow speed for first broadcast address
i3c: master: support to adjust first broadcast address speed
i3c/master: cmd_v1: Fix the rule for getting i3c mode
i3c: master: cdns: fix module autoloading
i3c: mipi-i3c-hci: Add a quirk to set Response buffer threshold
i3c: mipi-i3c-hci: Add a quirk to set timing parameters
i3c: mipi-i3c-hci: Relocate helper macros to HCI header file
i3c: mipi-i3c-hci: Add a quirk to set PIO mode
i3c: mipi-i3c-hci: Read HC_CONTROL_PIO_MODE only after i3c hci v1.1
i3c: mipi-i3c-hci: Add AMDI5017 ACPI ID to the I3C Support List
Merge tag 'input-for-v6.12-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for PixArt PS/2 touchpad
- updates to tsc2004/5, usbtouchscreen, and zforce_ts drivers
- support for GPIO-only mode for ADP55888 controller
- support for touch keys in Zinitix driver
- support for querying density of Synaptics sensors
- sysfs interface for Goodex "Berlin" devices to read and write touch
IC registers
- more quirks to i8042 to handle various Tuxedo laptops
- a number of drivers have been converted to using "guard" notation
when acquiring various locks, as well as using other cleanup
functions to simplify releasing of resources (with more drivers to
follow)
- evdev will limit amount of data that can be written into an evdev
instance at a given time to 4096 bytes (170 input events) to avoid
holding evdev->mutex for too long and starving other users
- Spitz has been converted to use software nodes/properties to describe
its matrix keypad and GPIO-connected LEDs
- msc5000_ts, msc_touchkey and keypad-nomadik-ske drivers have been
removed since noone in mainline have been using them
- other assorted cleanups and fixes
* tag 'input-for-v6.12-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (98 commits)
ARM: spitz: fix compile error when matrix keypad driver is enabled
Input: hynitron_cstxxx - drop explicit initialization of struct i2c_device_id::driver_data to 0
Input: adp5588-keys - fix check on return code
Input: Convert comma to semicolon
Input: i8042 - add TUXEDO Stellaris 15 Slim Gen6 AMD to i8042 quirk table
Input: i8042 - add another board name for TUXEDO Stellaris Gen5 AMD line
Input: tegra-kbc - use of_property_read_variable_u32_array() and of_property_present()
Input: ps2-gpio - use IRQF_NO_AUTOEN flag in request_irq()
Input: ims-pcu - fix calling interruptible mutex
Input: zforce_ts - switch to using asynchronous probing
Input: zforce_ts - remove assert/deassert wrappers
Input: zforce_ts - do not hardcode interrupt level
Input: zforce_ts - switch to using devm_regulator_get_enable()
Input: zforce_ts - stop treating VDD regulator as optional
Input: zforce_ts - make zforce_idtable constant
Input: zforce_ts - use dev_err_probe() where appropriate
Input: zforce_ts - do not ignore errors when acquiring regulator
Input: zforce_ts - make parsing of contacts less confusing
Input: zforce_ts - switch to using get_unaligned_le16
Input: zforce_ts - use guard notation when acquiring mutexes
...
Merge tag 'hwlock-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull hwspinlock update from Bjorn Andersson:
"This converts the Spreadtrum hardware spinlock DeviceTree binding to
YAML, to allow validation of related DeviceTree source"
* tag 'hwlock-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
dt-bindings: hwlock: sprd-hwspinlock: convert to YAML
Merge tag 'rpmsg-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson:
- Minor cleanup/refactor to the Qualcomm GLINK code, in order to add
trace events related to the messages exchange with the remote side,
useful for debugging a range of interoperability issues
- Rewrite the nested structs with flexible array members in order to
avoid the risk of invalid accesses
* tag 'rpmsg-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: glink: Avoid -Wflex-array-member-not-at-end warnings
rpmsg: glink: Introduce packet tracepoints
rpmsg: glink: Pass channel to qcom_glink_send_close_ack()
rpmsg: glink: Tidy up RX advance handling
Merge tag 'rproc-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- Add remoteproc support for the Cortex M4F found in AM62x and AM64x of
the TI K3 family, support for the modem remoteproc in the Qualcomm
SDX75, and audio, compute and general-purpose DSPs of the Qualcomm
SA8775P.
- Add support for blocking and non-blocking mailbox transmissions to
the i.MX remoteproc driver, and implement poweroff and reboot
mechanisms using them. Plus a few bug fixes and minor improvements.
- Cleanups and bug fixes for the TI K3 DSP and R5F drivers
- Support mapping SRAM regions into the AMD-Xilinx Zynqmp R5 cores
- Use devres helpers for various allocations in the Ingenic, TI DA8xx,
TI Keystone, TI K3, ST slim drivers
- Replace uses of of_{find,get}_property() with of_property_present()
where possible
* tag 'rproc-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (25 commits)
remoteporc: ingenic: Use devm_platform_ioremap_resource_byname()
remoteproc: da8xx: Use devm_platform_ioremap_resource_byname()
remoteproc: st_slim: Use devm_platform_ioremap_resource_byname()
remoteproc: xlnx: Add sram support
remoteproc: k3-r5: Fix error handling when power-up failed
remoteproc: imx_rproc: Add support for poweroff and reboot
remoteproc: imx_rproc: Allow setting of the mailbox transmit mode
remoteproc: k3-r5: Delay notification of wakeup event
remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem
remoteproc: k3: Factor out TI-SCI processor control OF get function
dt-bindings: remoteproc: k3-m4f: Add K3 AM64x SoCs
remoteproc: k3-dsp: Acquire mailbox handle during probe routine
remoteproc: k3-r5: Acquire mailbox handle during probe routine
remoteproc: k3-r5: Use devm_rproc_alloc() helper
remoteproc: qcom: pas: Add support for SA8775p ADSP, CDSP and GPDSP
remoteproc: qcom: pas: Add SDX75 remoteproc support
dt-bindings: remoteproc: qcom,sm8550-pas: document the SDX75 PAS
remoteproc: keystone: Use devm_rproc_alloc() helper
remoteproc: keystone: Use devm_kasprintf() to build name string
dt-bindings: remoteproc: xlnx,zynqmp-r5fss: Add missing "additionalProperties" on child nodes
...
Merge tag 'vfio-v6.12-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
"Just a few cleanups this cycle:
- Remove several unused structure and function declarations, and
unused variables (Dr. David Alan Gilbert, Yue Haibing, Zhang Zekun)
- Constify unmodified structure in mdev (Hongbo Li)
- Convert to unsigned type to catch overflow with less fanfare than
passing a negative value to kcalloc() (Dan Carpenter)"
* tag 'vfio-v6.12-rc1' of https://github.com/awilliam/linux-vfio:
vfio/pci: clean up a type in vfio_pci_ioctl_pci_hot_reset_groups()
vfio/mdev: Constify struct kobj_type
vfio: mdev: Remove unused function declarations
vfio/fsl-mc: Remove unused variable 'hwirq'
vfio/pci: Remove unused struct 'vfio_pci_mmap_vma'
Merge tag 'dma-mapping-6.12-2024-09-24' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- sort out a few issues with the direct calls to iommu-dma (Christoph
Hellwig, Leon Romanovsky)
* tag 'dma-mapping-6.12-2024-09-24' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: report unlimited DMA addressing in IOMMU DMA path
iommu/dma: remove most stubs in iommu-dma.h
dma-mapping: fix vmap and mmap of noncontiougs allocations
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"Collection of small cleanup and one fix:
- Sort headers and struct forward declarations
- Fix random selftest failures in some cases due to dirty tracking
tests
- Have the reserved IOVA regions mechanism work when a HWPT is used
as a nesting parent. This updates the nesting parent's IOAS with
the reserved regions of the device and will also install the ITS
doorbell page on ARM.
- Add missed validation of parent domain ops against the current
iommu
- Fix a syzkaller bug related to integer overflow during ALIGN()
- Tidy two iommu_domain attach paths"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommu: Set iommu_attach_handle->domain in core
iommufd: Avoid duplicated __iommu_group_set_core_domain() call
iommufd: Protect against overflow of ALIGN() during iova allocation
iommufd: Reorder struct forward declarations
iommufd: Check the domain owner of the parent before creating a nesting domain
iommufd/device: Enforce reserved IOVA also when attached to hwpt_nested
iommufd/selftest: Fix buffer read overrrun in the dirty test
iommufd: Reorder include files
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Usual collection of small improvements and fixes, nothing especially
stands out to me here.
The new multipath PCI feature is a sign of things to come, I think we
will see more of this in the next 10 years. Broadcom and HNS continue
to update their drivers for their new HW generations.
Summary:
- Bug fixes and minor improvments in cxgb4, siw, mlx5, rxe, efa, rts,
hfi, erdma, hns, irdma
- Variable size work queue, SRQ changes, and relaxed ordering for new
bnxt HW
- New ODP fault resolution FW protocol in mlx5
- New 'rdma monitor' netlink mechanism"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits)
RDMA/bnxt_re: Remove the unused variable en_dev
RDMA/nldev: Add missing break in rdma_nl_notify_err_msg()
RDMA/irdma: fix error message in irdma_modify_qp_roce()
RDMA/cxgb4: Added NULL check for lookup_atid
RDMA/hns: Fix ah error counter in sw stat not increasing
RDMA/bnxt_re: Recover the device when FW error is detected
RDMA/bnxt_re: Group all operations under add_device and remove_device
RDMA/bnxt_re: Use the aux device for L2 ULP callbacks
RDMA/bnxt_re: Change aux driver data to en_info to hold more information
RDMA/nldev: Expose whether RDMA monitoring is supported
RDMA/nldev: Add support for RDMA monitoring
RDMA/mlx5: Use IB set_netdev and get_netdev functions
RDMA/device: Remove optimization in ib_device_get_netdev()
RDMA/mlx5: Initialize phys_port_cnt earlier in RDMA device creation
RDMA/mlx5: Obtain upper net device only when needed
RDMA/mlx5: Check RoCE LAG status before getting netdev
RDMA/mlx5: Consider the query_vuid cap for data_direct
net/mlx5: Handle memory scheme ODP capabilities
RDMA/mlx5: Add implicit MR handling to ODP memory scheme
RDMA/mlx5: Add handling for memory scheme page fault events
...
Merge tag 'sched_ext-for-6.12-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Three build fixes
- The fix for a stall bug introduced by a recent optimization in sched
core (SM_IDLE)
- Addition of /sys/kernel/sched_ext/enable_seq. While not a fix, it is
a simple addition that distro people want to be able to tell whether
an SCX scheduler has ever been loaded on the system
* tag 'sched_ext-for-6.12-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Provide a sysfs enable_seq counter
sched_ext: Fix build when !CONFIG_STACKTRACE
sched, sched_ext: Disable SM_IDLE/rq empty path when scx_enabled()
sched: Put task_group::idle under CONFIG_GROUP_SCHED_WEIGHT
sched: Add dummy version of sched_group_set_idle()
Merge tag 'for-6.12/io_uring-20240922' of git://git.kernel.dk/linux
Pull more io_uring updates from Jens Axboe:
"Mostly just a set of fixes in here, or little changes that didn't get
included in the initial pull request. This contains:
- Move the SQPOLL napi polling outside the submission lock (Olivier)
- Rename of the "copy buffers" API that got added in the 6.12 merge
window. There's really no copying going on, it's just referencing
the buffers. After a bit of consideration, decided that it was
better to simply rename this to avoid potential confusion (me)
- Shrink struct io_mapped_ubuf from 48 to 32 bytes, by changing it to
start + len tracking rather than having start / end in there, and
by removing the caching of folio_mask when we can just calculate it
from folio_shift when we need it (me)
- Fixes for the SQPOLL affinity checking (me, Felix)
- Fix for how cqring waiting checks for the presence of task_work.
Just check it directly rather than check for a specific
notification mechanism (me)
- Tweak to how request linking is represented in tracing (me)
- Fix a syzbot report that deliberately sets up a huge list of
overflow entries, and then hits rcu stalls when flushing this list.
Just check for the need to preempt, and drop/reacquire locks in the
loop. There's no state maintained over the loop itself, and each
entry is yanked from head-of-list (me)"
* tag 'for-6.12/io_uring-20240922' of git://git.kernel.dk/linux:
io_uring: check if we need to reschedule during overflow flush
io_uring: improve request linking trace
io_uring: check for presence of task_work rather than TIF_NOTIFY_SIGNAL
io_uring/sqpoll: do the napi busy poll outside the submission block
io_uring: clean up a type in io_uring_register_get_file()
io_uring/sqpoll: do not put cpumask on stack
io_uring/sqpoll: retain test for whether the CPU is valid
io_uring/rsrc: change ubuf->ubuf_end to length tracking
io_uring/rsrc: get rid of io_mapped_ubuf->folio_mask
io_uring: rename "copy buffers" to "clone buffers"
Merge tag 'sysctl-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl update from Joel Granados:
- Avoid evaluating non-mount ctl_tables as a sysctl_mount_point by
removing the unlikely (but possible) chance that the permanently
empty ctl_table array shares its address with another ctl_table
- Update Joel Granados' contact info in MAINTAINERS
* tag 'sysctl-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
MAINTAINERS: update email for Joel Granados
sysctl: avoid spurious permanent empty tables
Merge tag 'riscv-for-linus-6.12-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support using Zkr to seed KASLR
- Support IPI-triggered CPU backtracing
- Support for generic CPU vulnerabilities reporting to userspace
- A few cleanups for missing licenses
- The size limit on the XIP kernel has been removed
- Support for tracing userspace stacks
- Support for the Svvptc extension
- Various cleanups and fixes throughout the tree
* tag 'riscv-for-linus-6.12-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (47 commits)
crash: Fix riscv64 crash memory reserve dead loop
perf/riscv-sbi: Add platform specific firmware event handling
tools: Optimize ring buffer for riscv
tools: Add riscv barrier implementation
RISC-V: Don't have MAX_PHYSMEM_BITS exceed phys_addr_t
ACPI: NUMA: initialize all values of acpi_early_node_map to NUMA_NO_NODE
riscv: Enable bitops instrumentation
riscv: Omit optimized string routines when using KASAN
ACPI: RISCV: Make acpi_numa_get_nid() to be static
riscv: Randomize lower bits of stack address
selftests: riscv: Allow mmap test to compile on 32-bit
riscv: Make riscv_isa_vendor_ext_andes array static
riscv: Use LIST_HEAD() to simplify code
riscv: defconfig: Disable RZ/Five peripheral support
RISC-V: Implement kgdb_roundup_cpus() to enable future NMI Roundup
riscv: avoid Imbalance in RAS
riscv: cacheinfo: Add back init_cache_level() function
riscv: Remove unused _TIF_WORK_MASK
drivers/perf: riscv: Remove redundant macro check
riscv: define ILLEGAL_POINTER_VALUE for 64bit
...
Merge tag 'landlock-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
"We can now scope a Landlock domain thanks to a new "scoped" field that
can deny interactions with resources outside of this domain.
The LANDLOCK_SCOPE_ABSTRACT_UNIX_SOCKET flag denies connections to an
abstract UNIX socket created outside of the current scoped domain, and
the LANDLOCK_SCOPE_SIGNAL flag denies sending a signal to processes
outside of the current scoped domain.
These restrictions also apply to nested domains according to their
scope. The related changes will also be useful to support other kind
of IPC isolations"
* tag 'landlock-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Document LANDLOCK_SCOPE_SIGNAL
samples/landlock: Add support for signal scoping
selftests/landlock: Test signal created by out-of-bound message
selftests/landlock: Test signal scoping for threads
selftests/landlock: Test signal scoping
landlock: Add signal scoping
landlock: Document LANDLOCK_SCOPE_ABSTRACT_UNIX_SOCKET
samples/landlock: Add support for abstract UNIX socket scoping
selftests/landlock: Test inherited restriction of abstract UNIX socket
selftests/landlock: Test connected and unconnected datagram UNIX socket
selftests/landlock: Test UNIX sockets with any address formats
selftests/landlock: Test abstract UNIX socket scoping
selftests/landlock: Test handling of unknown scope
landlock: Add abstract UNIX socket scoping
Merge tag 'keys-next-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull key updates from Jarkko Sakkinen:
"The bulk of this is OpenSSL 3.0 compatibility fixes for the signing
and certificates"
* tag 'keys-next-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
sign-file,extract-cert: use pkcs11 provider for OPENSSL MAJOR >= 3
sign-file,extract-cert: avoid using deprecated ERR_get_error_line()
sign-file,extract-cert: move common SSL helper functions to a header
KEYS: prevent NULL pointer dereference in find_asymmetric_key()
KEYS: Remove unused declarations
Merge tag 'lsm-pr-20240923' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull LSM fixes from Paul Moore:
- Add a missing security_mmap_file() check to the remap_file_pages()
syscall
- Properly reference the SELinux and Smack LSM blobs in the
security_watch_key() LSM hook
- Fix a random IPE selftest crash caused by a missing list terminator
in the test
* tag 'lsm-pr-20240923' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
ipe: Add missing terminator to list of unit tests
selinux,smack: properly reference the LSM blob in security_watch_key()
mm: call the security_mmap_file() LSM hook in remap_file_pages()
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The core clk framework is left largely untouched this time around
except for support for the newly ratified DT property
'assigned-clock-rates-u64'.
I'm much more excited about the support for loading DT overlays from
KUnit tests so that we can test how the clk framework parses DT nodes
during clk registration. The clk framework has some places that are
highly DeviceTree dependent so this charts the path to extend the
KUnit tests to cover even more framework code in the future. I've got
some more tests on the list that use the DT overlay support, but they
uncovered issues with clk unregistration that I'm still working on
fixing.
Outside the core, the clk driver update pile is dominated by Qualcomm
and Renesas SoCs, making it fairly usual. Looking closer, there are
fixes for things all over the place, like adding missing clk
frequencies or moving defines for the number of clks out of DT binding
headers into the drivers. There are even conversions of DT bindings to
YAML and migration away from strings to describe clk topology. Overall
it doesn't look unusual so I expect the new drivers to be where we'll
have fixes in the coming weeks.
Core:
- KUnit tests for clk registration and fixed rate basic clk type
- A couple more devm helpers, one consumer and one provider
- Support for assigned-clock-rates-u64
New Drivers:
- Camera, display and GPU clocks on Qualcomm SM4450
- Camera clocks on Qualcomm SM8150
- Rockchip rk3576 clks
- Microchip SAM9X7 clks
- Renesas RZ/V2H(P) (R9A09G057) clks
Updates:
- Mark a bunch of struct freq_tbl const to reduce .data usage
- Add Qualcomm MSM8226 A7PLL and Regera PLL support
- Fix the Qualcomm Lucid 5LPE PLL configuration sequence to not reuse
Trion, as they do differ
- A number of fixes to the Qualcomm SM8550 display clock driver
- Fold Qualcomm SM8650 display clock driver into SM8550 one
- Add missing clocks and GDSCs needed for audio on Qualcomm MSM8998
- Add missing USB MP resets, GPLL9, and QUPv3 DFS to Qualcomm SC8180X
- Fix sdcc clk frequency tables on Qualcomm SC8180X
- Drop the Qualcomm SM8150 gcc_cpuss_ahb_clk_src
- Mark Qualcomm PCIe GDSCs as RET_ON on sm8250 and sm8540 to avoid
them turning off during suspend
- Use the HW_CTRL mechanism on Qualcomm SM8550 video clock controller
GDSCs
- Get rid of CLK_NR_CLKS defines in Rockchip DT binding headers
- Some fixes for Rockchip rk3228 and rk3588
- Exynos850: Add clock for Thermal Management Unit
- Exynos7885: Fix duplicated ID in the header, add missing TOP PLLs
and add clocks for USB block in the FSYS clock controller
- ExynosAutov9: Add DPUM clock controller
- ExynosAutov920: Add new (first) clock controllers: TOP and PERIC0
(and a bit more complete bindings)
- Use clk_hw pointer instead of fw_name for acm_aud_clk[0-1]_sel
clocks on i.MX8Q as parents in ACM provider
- Add i.MX95 NETCMIX support to the block control provider
- Fix parents for ENETx_REF_SEL clocks on i.MX6UL
- Add USB clocks, resets and power domains on Renesas RZ/G3S
- Add Generic Timer (GTM), I2C Bus Interface (RIIC), SD/MMC Host
Interface (SDHI) and Watchdog Timer (WDT) clocks and resets on
Renesas RZ/V2H
- Add PCIe, PWM, and CAN-FD clocks on Renesas R-Car V4M
- Add LCD controller clocks and resets on Renesas RZ/G2UL
- Add DMA clocks and resets on Renesas RZ/G3S
- Add fractional multiplication PLL support on Renesas R-Car Gen4
- Document support for the Renesas RZ/G2M v3.0 (r8a774a3) SoC
- Support for the Microchip SAM9X7 SoC as follows:
- Updates for the Microchip PLL drivers
- DT binding documentation updates (for the new clock driver and for
the slow clock controller that SAM9X7 is using)
- A fix for the Microchip SAMA7G5 clock driver to avoid allocating
more memory than necessary
- Constify some Amlogic structs
- Add SM1 eARC clocks for Amlogic
- Introduce a symbol namespace for Amlogic clock specific symbols
- Add reset controller support to audiomix block control on i.MX
- Add CLK_SET_RATE_PARENT flag to all audiomix clocks and to i.MX7D
lcdif_pixel_src clock
- Fix parent clocks for earc_phy and audpll on i.MX8MP
- Fix default parents for enet[12]_ref_sel on i.MX6UL
- Add ops in composite 8M and 93 that allow no-op on disable
- Add check for PCC present bit on composite 7ULP register
- Fix fractional part for fracn-gppll on prepare in i.MX
- Fix clock tree update for TF-A managed clocks on i.MX8M
- Drop CLK_SET_PARENT_GATE for DRAM mux on i.MX7D
- Add the SAI7 IPG clock for i.MX8MN
- Mark the 'nand_usdhc_bus' clock as non-critical on i.MX8MM
- Add LVDS bypass clocks on i.MX8QXP
- Add muxes for MIPI and PHY ref clocks on i.MX
- Reorder dc0_bypass0_clk, lcd_pxl and dc1_disp clocks on i.MX8QXP
- Add 1039.5MHz and 800MHz rates to fracn-gppll table on i.MX
- Add CLK_SET_RATE_PARENT for media_disp pixel clocks on i.MX8QXP
- Add some module descriptions to the i.MX generic and the i.MXRT1050
driver
- Fix return value for bypass for composite i.MX7ULP
- Move Mediatek clk bindings to clock/
- Convert some more clk bindings to dt schema"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (180 commits)
clk: Switch back to struct platform_driver::remove()
dt-bindings: clock, reset: fix top-comment indentation rk3576 headers
clk: rockchip: remove unused mclk_pdm0_p/pdm0_p definitions
clk: provide devm_clk_get_optional_enabled_with_rate()
clk: fixed-rate: add devm_clk_hw_register_fixed_rate_parent_data()
clk: imx6ul: fix clock parent for IMX6UL_CLK_ENETx_REF_SEL
clk: renesas: r9a09g057: Add clock and reset entries for GTM/RIIC/SDHI/WDT
clk: renesas: rzv2h: Add support for dynamic switching divider clocks
clk: renesas: r9a08g045: Add clocks, resets and power domains for USB
clk: rockchip: fix error for unknown clocks
clk: rockchip: rk3588: drop unused code
clk: rockchip: Add clock controller for the RK3576
clk: rockchip: Add new pll type pll_rk3588_ddr
dt-bindings: clock, reset: Add support for rk3576
dt-bindings: clock: rockchip,rk3588-cru: drop unneeded assigned-clocks
clk: rockchip: rk3588: Fix 32k clock name for pmu_24m_32k_100m_src_p
clk: imx95: enable the clock of NETCMIX block control
dt-bindings: clock: add RMII clock selection
dt-bindings: clock: add i.MX95 NETCMIX block control
clk: imx: imx8: Use clk_hw pointer for self registered clock in clk_parent_data
...
Merge tag 'i2c-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"I2C core:
- finally remove the I2C_COMPAT symbol after 15 years of deprecation
- lock client addresses during initialization to prevent race
conditions between different kinds of instantiation
- use scoped foreach OF child loops
- testunit cleanups and documentation improvements, as well as two
new tests, one for repeated start and one for triggering SMBusAlert
interrupts
I2C host drivers:
- DesignWare and Renesas I2C driver updates.
The first has has undergone through a series of cleanups that have
been sent to the mailing list a year ago for the first time and
finally get merged in this pull request. They are many, from typos
(e.g. i2/i2c), to cosmetics, to refactoring (e.g. move inline
functions to librarieas) and many others.
- all the DesignWare Kconfig options have been grouped under the
I2C_DESIGNWARE_CORE and this required some adaptation in many of
the kernel configuration files for different arm and mips boards
Cleanups:
- improve the exit path in the runtime resume function for the
Qualcomm Geni platform
- get rid of the unused "target_addr" parameter in the Intel LJCA
driver
- intialize the restart_flag in the MediaTek controller in one single
place
- constify a few global data structures in the virtio driver
- simplify the bus speed handling in the Renesas driver init function
making it more readable
- improved probe function of the Renesas R-Car driver
- switch the iMX/MXC driver to use RUNTIME_PM_OPS() instead of
SET_RUNTIME_PM_OPS()
- iMX/MXC driver cleanups
- use devm_clk_get_enabled() to simplify the Renesas EMEV2, Ingenic
and MPC drivers
Refactoring:
- Fix a potential out of boundary array access in the Nuvoton driver.
This is not a bug fix because the issue could never occur due to
hardware not having the properties listed in the array. The change
makes the driver more future proof and, at the same time, silences
code analyzers.
Improvements:
- several patches improving the runtime power management handling of
the Renesas I2C (riic) driver
- use a more descriptive adapter name in the Intel i801 driver to
show the presence of the IDF feature
- kill pending transactions when irq's can't complete their handling
in the Intel Denverton (ismt) driver, triggering a timeout
New Feature:
- support fast mode plus in the Renesas I2C (riic) driver
New support:
- Added support for:
- Renesas R9A08G045
- Rockchip RK3576
- KEBA I2C
- Theobroma Systems Mule Multiplexer.
- new i2c-keba.c driver
- new driver for The Mule i2c multiplexer
Core I2C framework:
- move runtime PM functions in order to allow them to be accessed
during device add
Devicetree:
- nVidia and Qualcomm binding improvements
- get rid of redundant "multi-master" property in the aspeed binding
- convert i2c-sprd binding to YAML
AT24 updates:
- document a new model from giantec in DT bindings"
* tag 'i2c-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (69 commits)
i2c: designware: Use pci_get_drvdata()
i2c: designware: Propagate firmware node
i2c: designware: Uninline i2c_dw_probe()
i2c: ljca: Remove unused "target_addr" parameter
i2c: keba: Add KEBA I2C controller support
i2c: i801: Use a different adapter-name for IDF adapters
i2c: core: Setup i2c_adapter runtime-pm before calling device_add()
dt-bindings: i2c: i2c-sprd: convert to YAML
i2c: ismt: kill transaction in hardware on timeout
i2c: designware: Group all DesignWare drivers under a single option
net: txgbe: Fix I2C Kconfig dependencies
RISC-V: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
mips: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
arm64: defconfig: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
ARM: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
ARC: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
i2c: virtio: Constify struct i2c_algorithm and struct virtio_device_id
i2c: rcar: tidyup priv->devtype handling on rcar_i2c_probe()
i2c: imx: Convert comma to semicolon
i2c: jz4780: Use devm_clk_get_enabled() helpers
...
Merge tag 'libnvdimm-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Ira Weiny:
- use Open Firmware helper routines
- fix memory leak when nvdimm labels are incorrect
- remove some dead code
* tag 'libnvdimm-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm: Remove dead code for ENODEV checking in scan_labels()
nvdimm: Fix devs leaks in scan_labels()
nvdimm: Use of_property_present() and of_property_read_bool()
Merge tag 'leds-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
- Limited LED current based on thermal conditions in the QCOM flash LED
driver
- Fixed device child node usage in the BD2606MVV and PCA995x drivers
- Used device_for_each_child_node_scoped() to access child nodes in the
IS31FL319X driver
- Reset the LED controller during the probe in the LM3601X driver
- Used device_for_each_child_node() to access device child nodes in the
PCA995X driver
- Fixed CONFIG_LEDS_CLASS_MULTICOLOR dependency in the BlinkM driver
- Replaced msleep() with usleep_range() in the SUN50I-A100 driver
- Used scoped device node handling to simplify error paths in the
AAT1290, KTD2692, and MC13783 drivers
- Added missing of_node_get for probe duration in the MAX77693 driver
- Simplified using for_each_available_child_of_node_scoped() loops when
iterating over device nodes
- Used devm_clk_get_enabled() helpers in the LP55XX driver
- Converted DT bindings from TXT to YAML format for various drivers,
including LM3692x and SC2731-BLTC
- Set num_leds after allocation in the GPIO driver
- Removed irrelevant blink configuration error message in the PCA9532
driver
- Fixed module autoloading with MODULE_DEVICE_TABLE() in the Turris
Omnia driver
* tag 'leds-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (38 commits)
leds: turris-omnia: Fix module autoloading with MODULE_DEVICE_TABLE()
leds: pca9532: Remove irrelevant blink configuration error message
leds: gpio: Set num_leds after allocation
dt-bindings: leds: Convert leds-lm3692x to YAML format
leds: lp55xx: Use devm_clk_get_enabled() helpers
leds: as3645a: Use device_* to iterate over device child nodes
leds: qcom-lpg: Simplify with scoped for each OF child loop
leds: turris-omnia: Simplify with scoped for each OF child loop
leds: sc27xx: Simplify with scoped for each OF child loop
leds: pca9532: Simplify with scoped for each OF child loop
leds: netxbig: Simplify with scoped for each OF child loop
leds: mt6323: Simplify with scoped for each OF child loop
leds: mc13783: Use scoped device node handling to simplify error paths
leds: lp55xx: Simplify with scoped for each OF child loop
leds: is31fl32xx: Simplify with scoped for each OF child loop
leds: bcm6358: Simplify with scoped for each OF child loop
leds: bcm6328: Simplify with scoped for each OF child loop
leds: aw2013: Simplify with scoped for each OF child loop
leds: 88pm860x: Simplify with scoped for each OF child loop
leds: max77693: Simplify with scoped for each OF child loop
...
Merge tag 'dmaengine-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"Unusually, more new driver and device support than updates. Couple of
new device support, AMD, Rcar, Intel and New drivers in Freescale,
Loonsoon, AMD and LPC32XX with DT conversion and mode updates etc.
New support:
- Support for AMD Versal Gen 2 DMA IP
- Rcar RZ/G3S SoC dma controller
- Support for Intel Diamond Rapids and Granite Rapids-D dma controllers
- Support for Freescale ls1021a-qdma controller
- New driver for Loongson-1 APB DMA
- New driver for AMD QDMA
- Pl08x in LPC32XX router dma driver
Updates:
- Support for dpdma cyclic dma mode
- XML conversion for marvell xor dma bindings
- Dma clocks documentation for imx dma"
* tag 'dmaengine-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (24 commits)
dmaengine: loongson1-apb-dma: Fix the build warning caused by the size of pdev_irqname
dmaengine: Fix spelling mistakes
dmaengine: Add dma router for pl08x in LPC32XX SoC
dmaengine: fsl-edma: add edma src ID check at request channel
dmaengine: fsl-edma: change to guard(mutex) within fsl_edma3_xlate()
dmaengine: avoid non-constant format string
dmaengine: imx-dma: Remove i.MX21 support
dt-bindings: dma: fsl,imx-dma: Document the DMA clocks
dmaengine: Loongson1: Add Loongson-1 APB DMA driver
dt-bindings: dma: Add Loongson-1 APB DMA
dmaengine: zynqmp_dma: Add support for AMD Versal Gen 2 DMA IP
dt-bindings: dmaengine: zynqmp_dma: Add a new compatible string
dmaengine: idxd: Add new DSA and IAA device IDs for Diamond Rapids platform
dmaengine: idxd: Add a new DSA device ID for Granite Rapids-D platform
dmaengine: ti: k3-udma: Remove unused declarations
dmaengine: amd: qdma: Add AMD QDMA driver
dmaengine: xilinx: dpdma: Add support for cyclic dma mode
dma: ipu: Remove include/linux/dma/ipu-dma.h
dt-bindings: dma: fsl-mxs-dma: Add compatible string "fsl,imx8qxp-dma-apbh"
dt-bindings: fsl-qdma: allow compatible string fallback to fsl,ls1021a-qdma
...
Merge tag 'phy-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"New hw support:
- Rcar usb2 support for RZ/G3S SoC
- Nuvoton MA35 SoC USB 2.0 PHY driver
Removed:
- obsolete qcom,usb-8x16-phy bindings
Updates:
- 4 lane PCIe support for Qualcomm X1E80100
- Constify structure in subsystem update
- Subsystem simplification with scoped for each OF child loop update
- Yaml conversion for Qualcomm sata phy, Hiilicon hi3798cv200-combphy
bindings"
* tag 'phy-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (40 commits)
phy: renesas: rcar-gen3-usb2: Add support for the RZ/G3S SoC
dt-bindings: phy: renesas,usb2-phy: Document RZ/G3S phy bindings
phy: renesas: rcar-gen3-usb2: Add support to initialize the bus
phy: ti: j721e-wiz: Simplify with scoped for each OF child loop
phy: ti: j721e-wiz: Drop OF node reference earlier for simpler code
phy: ti: gmii-sel: Simplify with dev_err_probe()
phy: ti: am654-serdes: Use scoped device node handling to simplify error paths
phy: qcom: qmp-pcie-msm8996: Simplify with scoped for each OF child loop
phy: mediatek: xsphy: Simplify with scoped for each OF child loop
phy: mediatek: tphy: Simplify with scoped for each OF child loop
phy: hisilicon: usb2: Simplify with scoped for each OF child loop
phy: cadence: sierra: Simplify with scoped for each OF child loop
phy: broadcom: brcm-sata: Simplify with scoped for each OF child loop
phy: broadcom: bcm-cygnus-pcie: Simplify with scoped for each OF child loop
phy: nuvoton: add new driver for the Nuvoton MA35 SoC USB 2.0 PHY
dt-bindings: phy: nuvoton,ma35-usb2-phy: add new bindings
phy: qcom: qmp-pcie: Configure all tables on port B PHY
phy: airoha: adjust initialization delay in airoha_pcie_phy_init()
dt-bindings: phy: socionext,uniphier: add top-level constraints
phy: qcom: qmp-pcie: Add Gen4 4-lanes mode for X1E80100
...
Merge tag 'soundwire-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- bus cleanup for warnings and probe deferral errors suppression
- cadence recheck for status with a delayed work
- intel interrupt rework on reset exit
* tag 'soundwire-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel_bus_common: enable interrupts before exiting reset
soundwire: cadence: re-check Peripheral status with delayed_work
soundwire: bus: clean up probe warnings
soundwire: bus: drop unused driver name field
soundwire: bus: suppress probe deferral errors
Merge tag 'ntb-6.12' of https://github.com/jonmason/ntb
Pull PCIe non-transparent bridge updates from Jon Mason:
"Bug fixes for intel ntb driver debugfs, use after free in switchtec
driver, ntb transport rx ring buffers. Also, cleanups in printks,
kernel-docs, and idt driver comment"
* tag 'ntb-6.12' of https://github.com/jonmason/ntb:
ntb: Force physically contiguous allocation of rx ring buffers
ntb: ntb_hw_switchtec: Fix use after free vulnerability in switchtec_ntb_remove due to race condition
ntb: idt: Fix the cacography in ntb_hw_idt.c
NTB: epf: don't misuse kernel-doc marker
NTB: ntb_transport: fix all kernel-doc warnings
ntb: Constify struct bus_type
ntb_perf: Fix printk format
ntb: intel: Fix the NULL vs IS_ERR() bug for debugfs_create_dir()
Merge tag 'firewire-updates-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire updates from Takashi Sakamoto:
"In the FireWire subsystem, tasklets have been used as the bottom half
of 1394 OHCi hardIRQ. In recent kernel updates, BH workqueues have
become available, and some developers have proposed replacing the
tasklet with a BH workqueue.
As a first step towards dropping tasklet use, the 1394 OHCI
isochronous context can use regular workqueues. In this context, the
batch of packets is processed in the specific queue, thus the timing
jitter caused by task scheduling is not so critical.
Additionally, DMA transmission can be scheduled per-packet basis,
therefore the context can be sleep between the operation of
transmissions. Furthermore, in-kernel protocol implementation involves
some CPU-bound tasks, which can sometimes consumes CPU time so long.
These characteristics suggest that normal workqueues are suitable,
through BH workqueues are not.
The replacement with a workqueue allows unit drivers to process the
content of packets in non-atomic context. It brings some reliefs to
some drivers in sound subsystem that spin-lock is not mandatory
anymore during isochronous packet processing.
Summary:
- Replace tasklet with workqueue for isochronous context
- Replace IDR with XArray
- Utilize guard macro where possible
- Print deprecation warning when enabling debug parameter of
firewire-ohci module
- Switch to nonatomic PCM operation"
* tag 'firewire-updates-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: (55 commits)
firewire: core: rename cause flag of tracepoints event
firewire: core: update documentation of kernel APIs for flushing completions
firewire: core: add helper function to retire descriptors
Revert "firewire: core: move workqueue handler from 1394 OHCI driver to core function"
Revert "firewire: core: use mutex to coordinate concurrent calls to flush completions"
firewire: core: use mutex to coordinate concurrent calls to flush completions
firewire: core: move workqueue handler from 1394 OHCI driver to core function
firewire: core: fulfill documentation of fw_iso_context_flush_completions()
firewire: core: expose kernel API to schedule work item to process isochronous context
firewire: core: use WARN_ON_ONCE() to avoid superfluous dumps
ALSA: firewire: use nonatomic PCM operation
firewire: core: non-atomic memory allocation for isochronous event to user client
firewire: ohci: operate IT/IR events in sleepable work process instead of tasklet softIRQ
firewire: core: add local API to queue work item to workqueue specific to isochronous contexts
firewire: core: allocate workqueue to handle isochronous contexts in card
firewire: ohci: obsolete direct usage of printk_ratelimit()
firewire: ohci: deprecate debug parameter
firewire: core: update fw_device outside of device_find_child()
firewire: ohci: fix error path to detect initiated reset in TI TSB41BA3D phy
firewire: core/ohci: minor refactoring for computation of configuration ROM size
...
Merge tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Wait for device readiness after reset by polling Vendor ID and
looking for Configuration RRS instead of polling the Command
register and looking for non-error completions, to avoid hardware
retries done for RRS on non-Vendor ID reads (Bjorn Helgaas)
- Rename CRS Completion Status to RRS ('Request Retry Status') to
match PCIe r6.0 spec usage (Bjorn Helgaas)
- Clear LBMS bit after a manual link retrain so we don't try to
retrain a link when there's no downstream device anymore (Maciej W.
Rozycki)
- Revert to the original link speed after retraining fails instead of
leaving it restricted to 2.5GT/s, so a future device has a chance
to use higher speeds (Maciej W. Rozycki)
- Wait for each level of downstream bus, not just the first, to
become accessible before restoring devices on that bus (Ilpo
Järvinen)
- Add ARCH_PCI_DEV_GROUPS so s390 can add its own attribute_groups
without having to stomp on the core's pdev->dev.groups (Lukas
Wunner)
Driver binding:
- Export pcim_request_region(), a managed counterpart of
pci_request_region(), for use by drivers (Philipp Stanner)
- Export pcim_iomap_region() and deprecate pcim_iomap_regions()
(Philipp Stanner)
- Request the PCI BAR used by xboxvideo (Philipp Stanner)
- Request and map drm/ast BARs with pcim_iomap_region() (Philipp
Stanner)
MSI:
- Add MSI_FLAG_NO_AFFINITY flag for devices that mux MSIs onto a
single IRQ line and cannot set the affinity of each MSI to a
specific CPU core (Marek Vasut)
- Use MSI_FLAG_NO_AFFINITY and remove unnecessary .irq_set_affinity()
implementations in aardvark, altera, brcmstb, dwc, mediatek-gen3,
mediatek, mobiveil, plda, rcar, tegra, vmd, xilinx-nwl,
xilinx-xdma, and xilinx drivers to avoid 'IRQ: set affinity failed'
warnings (Marek Vasut)
Power management:
- Add pwrctl support for ATH11K inside the WCN6855 package (Konrad
Dybcio)
PCI device hotplug:
- Remove unnecessary hpc_ops struct from shpchp (ngn)
- Check for PCI_POSSIBLE_ERROR(), not 0xffffffff, in cpqphp
(weiyufeng)
Virtualization:
- Mark Creative Labs EMU20k2 INTx masking as broken (Alex Williamson)
- Add an ACS quirk for Qualcomm SA8775P, which doesn't advertise ACS
but does provide ACS-like features (Subramanian Ananthanarayanan)
IOMMU:
- Add function 0 DMA alias quirk for Glenfly Arise audio function,
which uses the function 0 Requester ID (WangYuli)
NPEM:
- Add Native PCIe Enclosure Management (NPEM) support for sysfs
control of NVMe RAID storage indicators (ok/fail/locate/
rebuild/etc) (Mariusz Tkaczyk)
- Add support for the ACPI _DSM PCIe SSD status LED management, which
is functionally similar to NPEM but mediated by platform firmware
(Mariusz Tkaczyk)
Device trees:
- Drop minItems and maxItems from ranges in PCI generic host binding
since host bridges may have several MMIO and I/O port apertures
(Frank Li)
- Add kirin, rcar-gen2, uniphier DT binding top-level constraints for
clocks (Krzysztof Kozlowski)
Altera PCIe controller driver:
- Convert altera DT bindings from text to YAML (Matthew Gerlach)
- Replace TLP_REQ_ID() with macro PCI_DEVID(), which does the same
thing and is what other drivers use (Jinjie Ruan)
Broadcom STB PCIe controller driver:
- Add DT binding maxItems for reset controllers (Jim Quinlan)
- Use the 'bridge' reset method if described in the DT (Jim Quinlan)
- Use the 'swinit' reset method if described in the DT (Jim Quinlan)
- Add 'has_phy' so the existence of a 'rescal' reset controller
doesn't imply software control of it (Jim Quinlan)
- Add support for many inbound DMA windows (Jim Quinlan)
- Rename SoC 'type' to 'soc_base' express the fact that SoCs come in
families of multiple similar devices (Jim Quinlan)
- Add Broadcom 7712 DT description and driver support (Jim Quinlan)
- Add imx6q-pcie 'dbi2' and 'atu' reg-names for i.MX8M Endpoints
(Richard Zhu)
- Fix a code restructuring error that caused i.MX8MM and i.MX8MP
Endpoints to fail to establish link (Richard Zhu)
- Fix i.MX8MP Endpoint occasional failure to trigger MSI by enforcing
outbound alignment requirement (Richard Zhu)
- Call phy_power_off() in the .probe() error path (Frank Li)
- Rename internal names from imx6_* to imx_* since i.MX7/8/9 are also
supported (Frank Li)
- Manage Refclk by using SoC-specific callbacks instead of switch
statements (Frank Li)
- Manage core reset by using SoC-specific callbacks instead of switch
statements (Frank Li)
- Expand comments for erratum ERR010728 workaround (Frank Li)
- Use generic PHY APIs to configure mode, speed, and submode, which
is harmless for devices that implement their own internal PHY
management and don't set the generic imx_pcie->phy (Frank Li)
- Add i.MX8Q (i.MX8QM, i.MX8QXP, and i.MX8DXL) DT binding and driver
Root Complex support (Richard Zhu)
- Add layerscape-pcie DT binding deprecated 'num-viewport' property
to address a DT checker warning (Frank Li)
- Change layerscape-pcie DT binding 'fsl,pcie-scfg' to phandle-array
(Frank Li)
Loongson PCIe controller driver:
- Increase max PCI hosts to 8 for Loongson-3C6000 and newer chipsets
(Huacai Chen)
Marvell Aardvark PCIe controller driver:
- Fix issue with emulating Configuration RRS for two-byte reads of
Vendor ID; previously it only worked for four-byte reads (Bjorn
Helgaas)
MediaTek PCIe Gen3 controller driver:
- Add per-SoC struct mtk_gen3_pcie_pdata to support multiple SoC
types (Lorenzo Bianconi)
- Use reset_bulk APIs to manage PHY reset lines (Lorenzo Bianconi)
- Add DT and driver support for Airoha EN7581 PCIe controller
(Lorenzo Bianconi)
Qualcomm PCIe controller driver:
- Update qcom,pcie-sc7280 DT binding with eight interrupts (Rayyan
Ansari)
- Add back DT 'vddpe-3v3-supply', which was incorrectly removed
earlier (Johan Hovold)
- Drop endpoint redundant masking of global IRQ events (Manivannan
Sadhasivam)
- Clarify unknown global IRQ message and only log it once to avoid a
flood (Manivannan Sadhasivam)
- Add 'linux,pci-domain' property to endpoint DT binding (Manivannan
Sadhasivam)
- Assign PCI domain number for endpoint controllers (Manivannan
Sadhasivam)
- Add 'qcom_pcie_ep' and the PCI domain number to IRQ names for
endpoint controller (Manivannan Sadhasivam)
- Add global SPI interrupt for PCIe link events to DT binding
(Manivannan Sadhasivam)
- Add global RC interrupt handler to handle 'Link up' events and
automatically enumerate hot-added devices (Manivannan Sadhasivam)
- Avoid mirroring of DBI and iATU register space so it doesn't
overlap BAR MMIO space (Prudhvi Yarlagadda)
- Enable controller resources like PHY only after PERST# is
deasserted to partially avoid the problem that the endpoint SoC
crashes when accessing things when Refclk is absent (Manivannan
Sadhasivam)
- Add 16.0 GT/s equalization and RX lane margining settings (Shashank
Babu Chinta Venkata)
- Pass domain number to pci_bus_release_domain_nr() explicitly to
avoid a NULL pointer dereference (Manivannan Sadhasivam)
Renesas R-Car PCIe controller driver:
- Make the read-only const array 'check_addr' static (Colin Ian King)
- Add R-Car V4M (R8A779H0) PCIe host and endpoint to DT binding
(Yoshihiro Shimoda)
TI DRA7xx PCIe controller driver:
- Request IRQF_ONESHOT for 'dra7xx-pcie-main' IRQ since the primary
handler is NULL (Siddharth Vadapalli)
- Handle IRQ request errors during root port and endpoint probe
(Siddharth Vadapalli)
TI J721E PCIe driver:
- Add DT 'ti,syscon-acspcie-proxy-ctrl' and driver support to enable
the ACSPCIE module to drive Refclk for the Endpoint (Siddharth
Vadapalli)
- Extract the cadence link setup from cdns_pcie_host_setup() so link
setup can be done separately during resume (Thomas Richard)
- Add T_PERST_CLK_US definition for the mandatory delay between
Refclk becoming stable and PERST# being deasserted (Thomas Richard)
- Add j721e suspend and resume support (Théo Lebrun)
TI Keystone PCIe controller driver:
- Fix NULL pointer checking when applying MRRS limitation quirk for
AM65x SR 1.0 Errata #i2037 (Dan Carpenter)
Xilinx NWL PCIe controller driver:
- Fix off-by-one error in INTx IRQ handler that caused INTx
interrupts to be lost or delivered as the wrong interrupt (Sean
Anderson)
Merge tag 'nfsd-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"Notable features of this release include:
- Pre-requisites for automatically determining the RPC server thread
count
- Clean-up and preparation for supporting LOCALIO, which will be
merged via the NFS client tree
- Enhancements and fixes to NFSv4.2 COPY offload
- A new Python-based tool for generating kernel SunRPC XDR encoding
and decoding functions, added as an aid for prototyping features in
protocols based on the Linux kernel's SunRPC implementation
As always I am grateful to the NFSD contributors, reviewers, testers,
and bug reporters who participated during this cycle"
* tag 'nfsd-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (57 commits)
xdrgen: Prevent reordering of encoder and decoder functions
xdrgen: typedefs should use the built-in string and opaque functions
xdrgen: Fix return code checking in built-in XDR decoders
tools: Add xdrgen
nfsd: fix delegation_blocked() to block correctly for at least 30 seconds
nfsd: fix initial getattr on write delegation
nfsd: untangle code in nfsd4_deleg_getattr_conflict()
nfsd: enforce upper limit for namelen in __cld_pipe_inprogress_downcall()
nfsd: return -EINVAL when namelen is 0
NFSD: Wrap async copy operations with trace points
NFSD: Clean up extra whitespace in trace_nfsd_copy_done
NFSD: Record the callback stateid in copy tracepoints
NFSD: Display copy stateids with conventional print formatting
NFSD: Limit the number of concurrent async COPY operations
NFSD: Async COPY result needs to return a write verifier
nfsd: avoid races with wake_up_var()
nfsd: use clear_and_wake_up_bit()
sunrpc: xprtrdma: Use ERR_CAST() to return
NFSD: Annotate struct pnfs_block_deviceaddr with __counted_by()
nfsd: call cache_put if xdr_reserve_space returns NULL
...
Merge tag 'for-6.12-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix dangling pointer to rb-tree of defragmented inodes after cleanup
- a followup fix to handle concurrent lseek on the same fd that could
leak memory under some conditions
- fix wrong root id reported in tree checker when verifying dref
* tag 'for-6.12-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix use-after-free on rbtree that tracks inodes for auto defrag
btrfs: tree-checker: fix the wrong output of data backref objectid
btrfs: fix race setting file private on concurrent lseek using same fd
kbuild: doc: describe the -C option precisely for external module builds
Building external modules is typically done using this command:
$ make -C <KERNEL_DIR> M=<EXTMOD_DIR>
Here, <KERNEL_DIR> refers to the output directory where the kernel was
built, not the kernel source directory.
When the kernel is built in the source tree, there is no ambiguity, as
the output directory and the source directory are the same.
If the kernel was built in a separate build directory, <KERNEL_DIR>
should be the kernel output directory. Otherwise, Kbuild cannot locate
necessary build artifacts. This has been the method for building
external modules against a pre-built kernel in a separate directory
for over 20 years. [1]
If you pass the kernel source directory to the -C option, you must also
specify the kernel build directory using the O= option. This approach
works as well, though it results in a slightly longer command:
$ make -C <KERNEL_SOURCE_DIR> O=<KERNEL_BUILD_DIR> M=<EXTMOD_DIR>
Some people mistakenly believe that O= should specify a build directory
for external modules when used together with M=. This commit adds more
clarification to Documentation/kbuild/kbuild.rst.
kbuild: doc: remove the description about shipped files
The use of shipped files is discouraged in the upstream kernel these
days. [1]
Downstream Makefiles have the freedom to use shipped files or other
options to handle binaries, but this should not be advertised in the
upstream document.
kbuild: doc: remove outdated description of the limitation on -I usage
Kbuild used to manipulate header search paths, enforcing the odd
limitation of "no space after -I".
Commit cdd750bfb1f7 ("kbuild: remove 'addtree' and 'flags' magic for
header search paths") stopped doing that. This limitation no longer
exists. Instead, you need to accurately specify the header search path.
(In this case, $(src)/include)
kbuild: doc: update the description about Kbuild/Makefile split
The phrase "In newer versions of the kernel" was added 14 years ago, by
commit efdf02cf0651 ("Documentation/kbuild: major edit of modules.txt
sections 1-4"). This feature is no longer new, so remove it and update
the paragraph.
Example 3 was written 20 years ago [1]. There is no need to note about
backward compatibility with such an old build system. Remove Example 3
entirely.
If RUST_LIB_SRC is defined in the top-level Makefile (via an environment
variable or command line), it is already exported.
The only situation where it is defined but not exported is when the
top-level Makefile is wrapped by another Makefile (e.g., GNUmakefile).
I cannot think of any other use cases.
I know some people use this tip to define custom variables. However,
even in that case, you can export it directly in the wrapper Makefile.
Example GNUmakefile:
export RUST_LIB_SRC = /path/to/your/sysroot/lib/rustlib/src/rust/library
include Makefile
Merge tag 'fs_for_v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota and isofs updates from Jan Kara:
"A few small cleanups in quota and isofs"
* tag 'fs_for_v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
isofs: Annotate struct SL_component with __counted_by()
quota: remove unnecessary error code translation in dquot_quota_enable
quota: remove redundant return at end of void function
quota: remove unneeded return value of register_quota_format
quota: avoid missing put_quota_format when DQUOT_SUSPENDED is passed
Merge tag 'bcachefs-2024-09-21' of git://evilpiepirate.org/bcachefs
Pull bcachefs updates from Kent Overstreet:
- rcu_pending, btree key cache rework: this solves lock contenting in
the key cache, eliminating the biggest source of the srcu lock hold
time warnings, and drastically improving performance on some metadata
heavy workloads - on multithreaded creates we're now 3-4x faster than
xfs.
- We're now using an rhashtable instead of the system inode hash table;
this is another significant performance improvement on multithreaded
metadata workloads, eliminating more lock contention.
- for_each_btree_key_in_subvolume_upto(): new helper for iterating over
keys within a specific subvolume, eliminating a lot of open coded
"subvolume_get_snapshot()" and also fixing another source of srcu
lock time warnings, by running each loop iteration in its own
transaction (as the existing for_each_btree_key() does).
- More work on btree_trans locking asserts; we now assert that we don't
hold btree node locks when trans->locked is false, which is important
because we don't use lockdep for tracking individual btree node
locks.
- Some cleanups and improvements in the bset.c btree node lookup code,
from Alan.
- Rework of btree node pinning, which we use in backpointers fsck. The
old hacky implementation, where the shrinker just skipped over nodes
in the pinned range, was causing OOMs; instead we now use another
shrinker with a much higher seeks number for pinned nodes.
- Rebalance now uses BCH_WRITE_ONLY_SPECIFIED_DEVS; this fixes an issue
where rebalance would sometimes fall back to allocating from the full
filesystem, which is not what we want when it's trying to move data
to a specific target.
- Use __GFP_ACCOUNT, GFP_RECLAIMABLE for btree node, key cache
allocations.
- Idmap mounts are now supported (Hongbo Li)
- Rename whiteouts are now supported (Hongbo Li)
- Erasure coding can now handle devices being marked as failed, or
forcibly removed. We still need the evacuate path for erasure coding,
but it's getting very close to ready for people to start using.
* tag 'bcachefs-2024-09-21' of git://evilpiepirate.org/bcachefs: (99 commits)
bcachefs: return err ptr instead of null in read sb clean
bcachefs: Remove duplicated include in backpointers.c
bcachefs: Don't drop devices with stripe pointers
bcachefs: bch2_ec_stripe_head_get() now checks for change in rw devices
bcachefs: bch_fs.rw_devs_change_count
bcachefs: bch2_dev_remove_stripes()
bcachefs: bch2_trigger_ptr() calculates sectors even when no device
bcachefs: improve error messages in bch2_ec_read_extent()
bcachefs: improve error message on too few devices for ec
bcachefs: improve bch2_new_stripe_to_text()
bcachefs: ec_stripe_head.nr_created
bcachefs: bch_stripe.disk_label
bcachefs: stripe_to_mem()
bcachefs: EIO errcode cleanup
bcachefs: Rework btree node pinning
bcachefs: split up btree cache counters for live, freeable
bcachefs: btree cache counters should be size_t
bcachefs: Don't count "skipped access bit" as touched in btree cache scan
bcachefs: Failed devices no longer require mounting in degraded mode
bcachefs: bch2_dev_rcu_noerror()
...
Andrea Righi [Sat, 21 Sep 2024 19:39:21 +0000 (21:39 +0200)]
sched_ext: Provide a sysfs enable_seq counter
As discussed during the distro-centric session within the sched_ext
Microconference at LPC 2024, introduce a sequence counter that is
incremented every time a BPF scheduler is loaded.
This feature can help distributions in diagnosing potential performance
regressions by identifying systems where users are running (or have ran)
custom BPF schedulers.
Example:
arighi@virtme-ng~> cat /sys/kernel/sched_ext/enable_seq
0
arighi@virtme-ng~> sudo scx_simple
local=1 global=0
^CEXIT: unregistered from user space
arighi@virtme-ng~> cat /sys/kernel/sched_ext/enable_seq
1
In this way user-space tools (such as Ubuntu's apport and similar) are
able to gather and include this information in bug reports.
a2f4b16e736d ("sched_ext: Build fix on !CONFIG_STACKTRACE[_SUPPORT]") tried
fixing build when !CONFIG_STACKTRACE but didn't so fully. Also put
stack_trace_print() and stack_trace_save() inside CONFIG_STACKTRACE to fix
build when !CONFIG_STACKTRACE.
Merge tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull 'struct fd' updates from Al Viro:
"Just the 'struct fd' layout change, with conversion to accessor
helpers"
* tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
add struct fd constructors, get rid of __to_fd()
struct fd: representation change
introduce fd_file(), convert all accessors to it.
mm: fix build on 32-bit targets without MAX_PHYSMEM_BITS
The merge resolution to deal with the conflict between commits ea72ce5da228 ("x86/kaslr: Expose and use the end of the physical memory
address space") and 99185c10d5d9 ("resource, kunit: add test case for
region_intersects()") ended up being broken in configurations didn't
define a MAX_PHYSMEM_BITS and that had a 32-bit 'phys_addr_t'.
The fallback to using all bits set (ie "(-1ULL)") ended up causing a
build error:
kernel/resource.c: In function ‘gfr_start’:
include/linux/minmax.h:93:30: error: conversion from ‘long long unsigned int’ to ‘resource_size_t’ {aka ‘unsigned int’} changes value from ‘18446744073709551615’ to ‘4294967295’ [-Werror=overflow]
this was reported by Geert for m68k, but he points out that it happens
on other 32-bit architectures too, eg mips, xtensa, parisc, and powerpc.
Limiting 'PHYSMEM_END' to a 'phys_addr_t' (which is the same as
'resource_size_t') fixes the build, but Geert points out that it will
then cause a silent overflow in mm/sparse.c:
unsigned long max_sparsemem_pfn = (PHYSMEM_END + 1) >> PAGE_SHIFT;
so we actually do want PHYSMEM_END to be defined a 64-bit type - just
not all ones, and not larger than 'phys_addr_t'.
The proper fix is probably to not have some kind of default fallback at
all, but just make sure every architecture has a valid MAX_PHYSMEM_BITS.
But in the meantime, this just applies the rule that PHYSMEM_END is the
largest value that fits in a 'phys_addr_t', but does not have the high
bit set in 64 bits.
mfd: tc3589x: Drop vendorless compatible string from match table
There's no need to list "tc3589x" in the DT match table. The I2C core
will strip any vendor prefix and match against the i2c_device_id table
which has an "tc3589x" entry.
Probably "tc3589x" and TC3589X_UNKNOWN could be removed altogether.
Use of that compatible was only on some STE platforms and was dropped
in 2013. There were ABI breaks in 2014 claiming no DTs in the wild. See
commit 1637d480f873 ("pinctrl: nomadik: force-convert to generic config
bindings").
projects / linux.git / log