Linus Torvalds [Sat, 2 Dec 2017 00:37:03 +0000 (19:37 -0500)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The critical one here is a fix for fpsimd register corruption across
signals which was introduced by the SVE support code (the register
files overlap), but the others are worth having as well.
Summary:
- Fix FP register corruption when SVE is not available or in use
- Fix out-of-tree module build failure when CONFIG_ARM64_MODULE_PLTS=y
- Missing 'const' generating errors with LTO builds
- Remove unsupported events from Cortex-A73 PMU description
- Removal of stale and incorrect comments"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: context: Fix comments and remove pointless smp_wmb()
arm64: cpu_ops: Add missing 'const' qualifiers
arm64: perf: remove unsupported events for Cortex-A73
arm64: fpsimd: Fix failure to restore FPSIMD state after signals
arm64: pgd: Mark pgd_cache as __ro_after_init
arm64: ftrace: emit ftrace-mod.o contents through code
arm64: module-plts: factor out PLT generation code for ftrace
arm64: mm: cleanup stale AIVIVT references
Linus Torvalds [Fri, 1 Dec 2017 13:40:17 +0000 (08:40 -0500)]
Merge tag 'powerpc-4.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Two fixes for nasty kexec/kdump crashes in certain configurations.
A couple of minor fixes for the new TIDR code.
A fix for an oops in a CXL error handling path.
Thanks to: Andrew Donnellan, Christophe Lombard, David Gibson, Mahesh
Salgaonkar, Vaibhav Jain"
* tag 'powerpc-4.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Do not assign thread.tidr if already assigned
powerpc: Avoid signed to unsigned conversion in set_thread_tidr()
powerpc/kexec: Fix kexec/kdump in P9 guest kernels
powerpc/powernv: Fix kexec crashes caused by tlbie tracing
cxl: Check if vphb exists before iterating over AFU devices
Linus Torvalds [Fri, 1 Dec 2017 13:14:22 +0000 (08:14 -0500)]
Merge tag 'mmc-v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Ensure that debugfs files are removed properly
- Fix missing blk_put_request()
- Deal with errors from blk_get_request()
- Rewind mmc bus suspend operations at failures
- Prepend '0x' to ocr and pre_eol_info in sysfs to identify as hex
MMC host:
- sdhci-msm: Make it optional to wait for signal level changes
- sdhci: Avoid swiotlb buffer being full"
* tag 'mmc-v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: prepend 0x to OCR entry in sysfs
mmc: core: prepend 0x to pre_eol_info entry in sysfs
mmc: sdhci: Avoid swiotlb buffer being full
mmc: sdhci-msm: Optionally wait for signal level changes
mmc: block: Ensure that debugfs files are removed
mmc: core: Do not leave the block driver in a suspended state
mmc: block: Check return value of blk_get_request()
mmc: block: Fix missing blk_put_request()
amdgpu:
- New display code (dc) dpms, suspend/resume and smatch fixes, along
with some others
- Some regression fixes for amdkfd/radeon.
- Fix a ttm regression for swiotlb disabled
bridge:
- A bunch of fixes for the tc358767 bridge
mali-dp + hdlcd:
- some fixes and internal API catchups.
imx-drm:
-regression fix in atomic code.
omapdrm:
- platform detection regression fixes"
* tag 'drm-fixes-for-v4.15-rc2' of git://people.freedesktop.org/~airlied/linux: (76 commits)
drm/imx: always call wait_for_flip_done in commit_tail
omapdrm: hdmi4_cec: signedness bug in hdmi4_cec_init()
drm: omapdrm: Fix DPI on platforms using the DSI VDDS
omapdrm: hdmi4: Correct the SoC revision matching
drm/omap: displays: panel-dpi: add backlight dependency
drm/omap: Fix error handling path in 'omap_dmm_probe()'
drm/i915: Disable THP until we have a GPU read BW W/A
drm/bridge: tc358767: fix 1-lane behavior
drm/bridge: tc358767: fix AUXDATAn registers access
drm/bridge: tc358767: fix timing calculations
drm/bridge: tc358767: fix DP0_MISC register set
drm/bridge: tc358767: filter out too high modes
drm/bridge: tc358767: do no fail on hi-res displays
drm/bridge: Fix lvds-encoder since the panel_bridge rework.
drm/bridge: synopsys/dw-hdmi: Enable cec clock
drm/bridge: adv7511/33: Fix adv7511_cec_init() failure handling
drm/radeon: remove init of CIK VMIDs 8-16 for amdkfd
drm/ttm: fix populate_and_map() functions once more
drm/fb_helper: Disable all crtc's when initial setup fails.
drm/atomic: make drm_atomic_helper_wait_for_vblanks more agressive
...
Linus Torvalds [Fri, 1 Dec 2017 13:05:45 +0000 (08:05 -0500)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A selection of fixes/changes that should make it into this series.
This contains:
- NVMe, two merges, containing:
- pci-e, rdma, and fc fixes
- Device quirks
- Fix for a badblocks leak in null_blk
- bcache fix from Rui Hua for a race condition regression where
-EINTR was returned to upper layers that didn't expect it.
- Regression fix for blktrace for a bug introduced in this series.
- blktrace cleanup for cgroup id.
- bdi registration error handling.
- Small series with cleanups for blk-wbt.
- Various little fixes for typos and the like.
Nothing earth shattering, most important are the NVMe and bcache fixes"
* 'for-linus' of git://git.kernel.dk/linux-block: (34 commits)
nvme-pci: fix NULL pointer dereference in nvme_free_host_mem()
nvme-rdma: fix memory leak during queue allocation
blktrace: fix trace mutex deadlock
nvme-rdma: Use mr pool
nvme-rdma: Check remotely invalidated rkey matches our expected rkey
nvme-rdma: wait for local invalidation before completing a request
nvme-rdma: don't complete requests before a send work request has completed
nvme-rdma: don't suppress send completions
bcache: check return value of register_shrinker
bcache: recover data from backing when data is clean
bcache: Fix building error on MIPS
bcache: add a comment in journal bucket reading
nvme-fc: don't use bit masks for set/test_bit() numbers
blk-wbt: fix comments typo
blk-wbt: move wbt_clear_stat to common place in wbt_done
blk-sysfs: remove NULL pointer checking in queue_wb_lat_store
blk-wbt: remove duplicated setting in wbt_init
nvme-pci: add quirk for delay before CHK RDY for WDC SN200
block: remove useless assignment in bio_split
null_blk: fix dev->badblocks leak
...
Will Deacon [Thu, 30 Nov 2017 18:25:17 +0000 (18:25 +0000)]
arm64: context: Fix comments and remove pointless smp_wmb()
The comments in the ASID allocator incorrectly hint at an MP-style idiom
using the asid_generation and the active_asids array. In fact, the
synchronisation is achieved using a combination of an xchg operation
and a spinlock, so update the comments and remove the pointless smp_wmb().
Dave Martin [Thu, 30 Nov 2017 11:56:37 +0000 (11:56 +0000)]
arm64: fpsimd: Fix failure to restore FPSIMD state after signals
The fpsimd_update_current_state() function is responsible for
loading the FPSIMD state from the user signal frame into the
current task during sigreturn. When implementing support for SVE,
conditional code was added to this function in order to handle the
case where SVE state need to be loaded for the task and merged with
the FPSIMD data from the signal frame; however, the FPSIMD-only
case was unintentionally dropped.
As a result of this, sigreturn does not currently restore the
FPSIMD state of the task, except in the case where the system
supports SVE and the signal frame contains SVE state in addition to
FPSIMD state.
This patch fixes this bug by making the copy-in of the FPSIMD data
from the signal frame to thread_struct unconditional.
This remains a performance regression from v4.14, since the FPSIMD
state is now copied into thread_struct and then loaded back,
instead of _only_ being loaded into the CPU FPSIMD registers.
However, it is essential to call task_fpsimd_load() here anyway in
order to ensure that the SVE enable bit in CPACR_EL1 is set
correctly before returning to userspace. This could use some
refactoring, but since sigreturn is not a fast path I have kept
this patch as a pure fix and left the refactoring for later.
Ard Biesheuvel [Mon, 20 Nov 2017 17:41:30 +0000 (17:41 +0000)]
arm64: ftrace: emit ftrace-mod.o contents through code
When building the arm64 kernel with both CONFIG_ARM64_MODULE_PLTS and
CONFIG_DYNAMIC_FTRACE enabled, the ftrace-mod.o object file is built
with the kernel and contains a trampoline that is linked into each
module, so that modules can be loaded far away from the kernel and
still reach the ftrace entry point in the core kernel with an ordinary
relative branch, as is emitted by the compiler instrumentation code
dynamic ftrace relies on.
In order to be able to build out of tree modules, this object file
needs to be included into the linux-headers or linux-devel packages,
which is undesirable, as it makes arm64 a special case (although a
precedent does exist for 32-bit PPC).
Given that the trampoline essentially consists of a PLT entry, let's
not bother with a source or object file for it, and simply patch it
in whenever the trampoline is being populated, using the existing
PLT support routines.
David Howells [Fri, 1 Dec 2017 11:40:43 +0000 (11:40 +0000)]
afs: Properly reset afs_vnode (inode) fields
When an AFS inode is allocated by afs_alloc_inode(), the allocated
afs_vnode struct isn't necessarily reset from the last time it was used as
an inode because the slab constructor is only invoked once when the memory
is obtained from the page allocator.
This means that information can leak from one inode to the next because
we're not calling kmem_cache_zalloc(). Some of the information isn't
reset, in particular the permit cache pointer.
David Howells [Fri, 1 Dec 2017 11:40:43 +0000 (11:40 +0000)]
afs: Fix permit refcounting
Fix four refcount bugs in afs_cache_permit():
(1) When checking the result of the kzalloc(), we can't just return, but
must put 'permits'.
(2) We shouldn't put permits immediately after hashing a new permit as we
need to keep the pointer stable so that we can check to see if
vnode->permit_cache has changed before we decide whether to assign to
it.
(3) 'permits' is being put twice.
(4) We need to put either the replacement or the thing replaced after the
assignment to vnode->permit_cache.
Without this, lots of the following are seen:
Kernel BUG at ffffffffa039857b [verbose debug info unavailable]
------------[ cut here ]------------
Kernel BUG at ffffffffa039858a [verbose debug info unavailable]
------------[ cut here ]------------
The addresses are in the .text..refcount section of the kafs.ko module.
Following the relocation records for the __ex_table section shows one to be
due to the decrement in afs_put_permits() and the other to be key_get() in
afs_cache_permit().
Occasionally, the following is seen:
refcount_t overflow at afs_cache_permit+0x57d/0x5c0 [kafs] in cc1[562], uid/euid: 0/0
WARNING: CPU: 0 PID: 562 at kernel/panic.c:657 refcount_error_report+0x9c/0xac
...
Linus Torvalds [Thu, 30 Nov 2017 23:49:50 +0000 (18:49 -0500)]
Merge tag 'acpi-4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a regression related to the ACPI EC handling during system
suspend/resume on some platforms and prevent modalias from being
exposed to user space for ACPI device object with "not functional and
not present" status.
Specifics:
- Fix an ACPI EC driver regression (from the 4.9 cycle) causing the
driver's power management operations to be omitted during system
suspend/resume on platforms where the EC instance from the ECDT
table is used instead of the one from the DSDT (Lv Zheng).
- Prevent modalias from being exposed to user space for ACPI device
objects with _STA returning 0 (not present and not functional) to
prevent driver modules from being loaded automatically for hardware
that is not actually present on some platforms (Hans de Goede)"
* tag 'acpi-4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / EC: Fix regression related to PM ops support in ECDT device
ACPI / bus: Leave modalias empty for devices which are not present
Dave Airlie [Thu, 30 Nov 2017 23:15:57 +0000 (09:15 +1000)]
Merge branch 'drm-fixes-4.15' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Fixes for 4.15. Highlights:
- DC fixes for S3, gamma, audio, pageflipping, etc.
- fix a regression in radeon from kfd removal
- fix a ttm regression with swiotlb disabled
- misc other fixes
* 'drm-fixes-4.15' of git://people.freedesktop.org/~agd5f/linux: (36 commits)
drm/radeon: remove init of CIK VMIDs 8-16 for amdkfd
drm/ttm: fix populate_and_map() functions once more
drm/amd/display: USB-C / thunderbolt dock specific workaround
drm/amd/display: Switch to drm_atomic_helper_wait_for_flip_done
drm/amd/display: fix gamma setting
drm/amd/display: Do not put drm_atomic_state on resume
drm/amd/display: Fix couple more inconsistent NULL checks in dc_resource
drm/amd/display: Fix potential NULL and mem leak in create_links
drm/amd/display: Fix hubp check in set_cursor_position
drm/amd/display: Fix use before NULL check in validate_timing
drm/amd/display: Bunch of smatch error and warning fixes in DC
drm/amd/display: Fix amdgpu_dm bugs found by smatch
drm/amd/display: try to find matching audio inst for enc inst first
drm/amd/display: fix seq issue: turn on clock before programming afmt.
drm/amd/display: fix memory leaks on error exit return
drm/amd/display: check plane state before validating fbc
drm/amd/display: Do DC mode-change check when adding CRTCs
drm/amd/display: Revert noisy assert messages
drm/amd/display: fix split viewport rounding error
drm/amd/display: Check aux channel before MST resume
...
Dave Airlie [Thu, 30 Nov 2017 23:15:31 +0000 (09:15 +1000)]
Merge branch 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld into drm-fixes
mali-dp interface cleanups.
* 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld:
drm: mali-dp: Disable planes when their CRTC gets disabled.
drm: mali-dp: Separate static internal data into a read-only structure.
drm/arm: Replace instances of drm_dev_unref with drm_dev_put.
drm: mali-dp: switch to drm_*_get(), drm_*_put() helpers
Dave Airlie [Thu, 30 Nov 2017 23:14:46 +0000 (09:14 +1000)]
Merge tag 'drm-amdkfd-fixes-2017-11-26' of git://people.freedesktop.org/~gabbayo/linux into drm-fixes
This is amdkfd pull request for -rc2. It contains three small fixes to the
CIK SDMA code, compilation error fix in kfd_ioctl.h and fix to accessing
a pointer after it was released.
* tag 'drm-amdkfd-fixes-2017-11-26' of git://people.freedesktop.org/~gabbayo/linux:
uapi: fix linux/kfd_ioctl.h userspace compilation errors
drm/amdkfd: fix amdkfd use-after-free GP fault
drm/amdkfd: Fix SDMA oversubsription handling
drm/amdkfd: Fix SDMA ring buffer size calculation
drm/amdgpu: Fix SDMA load/unload sequence on HWS disabled mode
Dave Airlie [Thu, 30 Nov 2017 23:14:18 +0000 (09:14 +1000)]
Merge branch 'for-upstream/hdlcd' of git://linux-arm.org/linux-ld into drm-fixes
3 hdlcd fixes/cleanups
* 'for-upstream/hdlcd' of git://linux-arm.org/linux-ld:
drm/arm: Replace instances of drm_dev_unref with drm_dev_put.
drm: Fix checkpatch issue: "WARNING: braces {} are not necessary for single statement blocks."
drm: hdlcd: Update PM code to save/restore console.
Dave Airlie [Thu, 30 Nov 2017 23:11:13 +0000 (09:11 +1000)]
Merge tag 'imx-drm-fixes-2017-11-30' of git://git.pengutronix.de/git/pza/linux into drm-fixes
drm/imx: fix commit_tail for new drm_atomic_helper_setup_commit
Since commit 080de2e5be2d ("drm/atomic: Check for busy planes/connectors before
setting the commit"), drm_atomic_helper_setup_commit expects that blocking
commits have completed flipping before the commit_tail returns. Add the missing
wait_for_flip_done to commit_tail to ensure this.
* tag 'imx-drm-fixes-2017-11-30' of git://git.pengutronix.de/git/pza/linux:
drm/imx: always call wait_for_flip_done in commit_tail
Dave Airlie [Thu, 30 Nov 2017 23:10:32 +0000 (09:10 +1000)]
Merge tag 'drm-intel-fixes-2017-11-30' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Disable transparent huge pages for now until we have a W/A
- Building fix when CONFIG_BACKLIGHT_CLASS_DEVICE is not selected
- GMBUS communication robustness
- Fbdev hotplug handling fix
* tag 'drm-intel-fixes-2017-11-30' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915: Disable THP until we have a GPU read BW W/A
drm/i915/gvt: Correct ADDR_4K/2M/1G_MASK definition
drm/i915/gvt: enabled pipe A default on creating vgpu
drm/i915/gvt: Move request alloc to dispatch_workload path only
drm/i915/gvt: remove skl_misc_ctl_write handler
drm/i915/gvt: Fix unsafe locking caused by spin_unlock_bh
drm/i915: fix intel_backlight_device_register declaration
drm/i915/fbdev: Serialise early hotplug events with async fbdev config
drm/i915: Prevent zero length "index" write
drm/i915: Don't try indexed reads to alternate slave addresses
Linus Torvalds [Thu, 30 Nov 2017 16:15:19 +0000 (08:15 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
- x86 bugfixes: APIC, nested virtualization, IOAPIC
- PPC bugfix: HPT guests on a POWER9 radix host
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (26 commits)
KVM: Let KVM_SET_SIGNAL_MASK work as advertised
KVM: VMX: Fix vmx->nested freeing when no SMI handler
KVM: VMX: Fix rflags cache during vCPU reset
KVM: X86: Fix softlockup when get the current kvmclock
KVM: lapic: Fixup LDR on load in x2apic
KVM: lapic: Split out x2apic ldr calculation
KVM: PPC: Book3S HV: Fix migration and HPT resizing of HPT guests on radix hosts
KVM: vmx: use X86_CR4_UMIP and X86_FEATURE_UMIP
KVM: x86: Fix CPUID function for word 6 (80000001_ECX)
KVM: nVMX: Fix vmx_check_nested_events() return value in case an event was reinjected to L2
KVM: x86: ioapic: Preserve read-only values in the redirection table
KVM: x86: ioapic: Clear Remote IRR when entry is switched to edge-triggered
KVM: x86: ioapic: Remove redundant check for Remote IRR in ioapic_set_irq
KVM: x86: ioapic: Don't fire level irq when Remote IRR set
KVM: x86: ioapic: Fix level-triggered EOI and IOAPIC reconfigure race
KVM: x86: inject exceptions produced by x86_decode_insn
KVM: x86: Allow suppressing prints on RDMSR/WRMSR of unhandled MSRs
KVM: x86: fix em_fxstor() sleeping while in atomic
KVM: nVMX: Fix mmu context after VMLAUNCH/VMRESUME failure
KVM: nVMX: Validate the IA32_BNDCFGS on nested VM-entry
...
Linus Torvalds [Thu, 30 Nov 2017 16:13:36 +0000 (08:13 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
- SPDX identifiers are added to more of the s390 specific files.
- The ELF_ET_DYN_BASE base patch from Kees is reverted, with the change
some old 31-bit programs crash.
- Bug fixes and cleanups.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (29 commits)
s390/gs: add compat regset for the guarded storage broadcast control block
s390: revert ELF_ET_DYN_BASE base changes
s390: Remove redundant license text
s390: crypto: Remove redundant license text
s390: include: Remove redundant license text
s390: kernel: Remove redundant license text
s390: add SPDX identifiers to the remaining files
s390: appldata: add SPDX identifiers to the remaining files
s390: pci: add SPDX identifiers to the remaining files
s390: mm: add SPDX identifiers to the remaining files
s390: crypto: add SPDX identifiers to the remaining files
s390: kernel: add SPDX identifiers to the remaining files
s390: sthyi: add SPDX identifiers to the remaining files
s390: drivers: Remove redundant license text
s390: crypto: Remove redundant license text
s390: virtio: add SPDX identifiers to the remaining files
s390: scsi: zfcp_aux: add SPDX identifier
s390: net: add SPDX identifiers to the remaining files
s390: char: add SPDX identifiers to the remaining files
s390: cio: add SPDX identifiers to the remaining files
...
Lucas Stach [Thu, 30 Nov 2017 13:31:46 +0000 (14:31 +0100)]
drm/imx: always call wait_for_flip_done in commit_tail
drm_atomic_helper_wait_for_vblanks will go away in the future.
The new drm_atomic_helper_setup_commit in 4.15 expects that blocking commits
have completed flipping before the commit_tail returns. This must be ensured
by calling wait_for_vblanks or wait_for_flip_done, where flip_done might do
a less agressive wait, which is fine for imx-drm.
Fixes: 080de2e5be2d (drm/atomic: Check for busy planes/connectors before
setting the commit) Signed-off-by: Lucas Stach <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Signed-off-by: Philipp Zabel <[email protected]>
Laurent Pinchart [Thu, 16 Nov 2017 08:50:19 +0000 (09:50 +0100)]
drm: omapdrm: Fix DPI on platforms using the DSI VDDS
Commit d178e034d565 ("drm: omapdrm: Move FEAT_DPI_USES_VDDS_DSI feature
to dpi code") replaced usage of platform data version with SoC matching
to configure DPI VDDS. The SoC match entries were incorrect, they should
have matched on the machine name instead of the SoC family. Fix it.
The result was observed on OpenPandora with OMAP3530 where the panel only
had the Blue channel and Red&Green were missing. It was not observed on
GTA04 with DM3730.
Peter Ujfalusi [Mon, 20 Nov 2017 09:51:40 +0000 (11:51 +0200)]
omapdrm: hdmi4: Correct the SoC revision matching
I believe the intention of the commit 2c9fc9bf45f8
("drm: omapdrm: Move FEAT_HDMI_* features to hdmi4 driver")
was to identify omap4430 ES1.x, omap4430 ES2.x and other OMAP4 revisions,
like omap4460.
By using family=OMAP4 in the match the code will treat omap4460 ES1.x in a
same way as it would treat omap4430 ES1.x
This breaks HDMI audio on OMAP4460 devices (PandaES for example).
Correct the match rule so we are not going to get false positive match.
The new backlight code causes a link failure when backlight
support itself is disabled:
drivers/gpu/drm/omapdrm/displays/panel-dpi.o: In function `panel_dpi_probe_of':
panel-dpi.c:(.text+0x35c): undefined reference to `of_find_backlight_by_node'
This adds a Kconfig dependency like we have for the other OMAP
display targets.
Fixes: 39135a305a0f ("drm/omap: displays: panel-dpi: Support for handling backlight devices") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Tomi Valkeinen <[email protected]>
Joonas Lahtinen [Mon, 27 Nov 2017 09:12:33 +0000 (11:12 +0200)]
drm/i915: Disable THP until we have a GPU read BW W/A
We seem to be missing some W/A for 2M pages and are getting
a hit on raw GPU read bandwidths (even 30%) even though the
GPU write bandwidths improve (even 10%).
For now, disable THP, which is our only practical source of
2M pages until we have a W/A for the issue.
v2:
- Be explicit that we talk about GPU bandwidths (Eero)
- s/deny/never/ because that's why (Chris)
First four bytes should go to DP0_AUXWDATA0. Due to bug if
len > 4 first four bytes was writen to DP0_AUXWDATA1 and all
data get shifted by 4 bytes. Fix it.
Andrey Gusakov [Tue, 7 Nov 2017 16:56:22 +0000 (19:56 +0300)]
drm/bridge: tc358767: fix timing calculations
Fields in HTIM01 and HTIM02 regs should be even.
Recomended thresh_dly value is max_tu_symbol.
Remove set of VPCTRL0.VSDELAY as it is related to DSI input
interface. Currently driver supports only DPI.
Eric Anholt [Tue, 14 Nov 2017 19:16:47 +0000 (11:16 -0800)]
drm/bridge: Fix lvds-encoder since the panel_bridge rework.
The panel_bridge bridge attaches to the panel's OF node, not the
lvds-encoder's node. Put in a little no-op bridge of our own so that
our consumers can still find a bridge where they expect.
This also fixes an unintended unregistration and leak of the
panel-bridge on module remove.
Support the "cec" optional clock. The documentation already mentions "cec"
optional clock and it is used by several boards, but currently the driver
doesn't enable it, thus preventing cec from working on those boards.
And even worse: a /dev/cecX device will appear for those boards, but it
won't be functioning without configuring this clock.
Changes:
v4:
- Change commit message to stress the importance of this patch
v3:
- Drop useless braces
v2:
- Separate ENOENT errors from others
- Propagate other errors (especially -EPROBE_DEFER)
If the device tree for a board did not specify a cec clock, then
adv7511_cec_init would return an error, which would cause adv7511_probe()
to fail and thus there is no HDMI output.
There is no need to have adv7511_probe() fail if the CEC initialization
fails, so just change adv7511_cec_init() to a void function. In addition,
adv7511_cec_init() should just return silently if the cec clock isn't
found and show a message for any other errors.
An otherwise correct cleanup patch from Dan Carpenter turned this broken
failure handling into a kernel Oops, so bisection points to commit 7af35b0addbc ("drm/kirin: Checking for IS_ERR() instead of NULL") rather
than 3b1b975003e4 ("drm: adv7511/33: add HDMI CEC support").
Linus Torvalds [Thu, 30 Nov 2017 03:12:44 +0000 (19:12 -0800)]
Merge branch 'akpm' (patches from Andrew)
Mergr misc fixes from Andrew Morton:
"28 fixes"
* emailed patches from Andrew Morton <[email protected]>: (28 commits)
fs/hugetlbfs/inode.c: change put_page/unlock_page order in hugetlbfs_fallocate()
mm/hugetlb: fix NULL-pointer dereference on 5-level paging machine
autofs: revert "autofs: fix AT_NO_AUTOMOUNT not being honored"
autofs: revert "autofs: take more care to not update last_used on path walk"
fs/fat/inode.c: fix sb_rdonly() change
mm, memcg: fix mem_cgroup_swapout() for THPs
mm: migrate: fix an incorrect call of prep_transhuge_page()
kmemleak: add scheduling point to kmemleak_scan()
scripts/bloat-o-meter: don't fail with division by 0
fs/mbcache.c: make count_objects() more robust
Revert "mm/page-writeback.c: print a warning if the vm dirtiness settings are illogical"
mm/madvise.c: fix madvise() infinite loop under special circumstances
exec: avoid RLIMIT_STACK races with prlimit()
IB/core: disable memory registration of filesystem-dax vmas
v4l2: disable filesystem-dax mapping support
mm: fail get_vaddr_frames() for filesystem-dax mappings
mm: introduce get_user_pages_longterm
device-dax: implement ->split() to catch invalid munmap attempts
mm, hugetlbfs: introduce ->split() to vm_operations_struct
scripts/faddr2line: extend usage on generic arch
...
Nadav Amit [Thu, 30 Nov 2017 00:11:33 +0000 (16:11 -0800)]
fs/hugetlbfs/inode.c: change put_page/unlock_page order in hugetlbfs_fallocate()
hugetlfs_fallocate() currently performs put_page() before unlock_page().
This scenario opens a small time window, from the time the page is added
to the page cache, until it is unlocked, in which the page might be
removed from the page-cache by another core. If the page is removed
during this time windows, it might cause a memory corruption, as the
wrong page will be unlocked.
It is arguable whether this scenario can happen in a real system, and
there are several mitigating factors. The issue was found by code
inspection (actually grep), and not by actually triggering the flow.
Yet, since putting the page before unlocking is incorrect it should be
fixed, if only to prevent future breakage or someone copy-pasting this
code.
Mike said:
"I am of the opinion that this does not need to be sent to stable.
Although the ordering is current code is incorrect, there is no way
for this to be a problem with current locking. In addition, I verified
that the perhaps bigger issue with sys_fadvise64(POSIX_FADV_DONTNEED)
for hugetlbfs and other filesystems is addressed in 3a77d214807c ("mm:
fadvise: avoid fadvise for fs without backing device")"
Ian Kent [Thu, 30 Nov 2017 00:11:26 +0000 (16:11 -0800)]
autofs: revert "autofs: fix AT_NO_AUTOMOUNT not being honored"
Commit 42f461482178 ("autofs: fix AT_NO_AUTOMOUNT not being honored")
allowed the fstatat(2) system call to properly honor the AT_NO_AUTOMOUNT
flag but introduced a semantic change.
In order to honor AT_NO_AUTOMOUNT a semantic change was made to the
negative dentry case for stat family system calls in follow_automount().
This changed the unconditional triggering of an automount in this case
to no longer be done and an error returned instead.
This has caused more problems than I expected so reverting the change is
needed.
In a discussion with Neil Brown it was concluded that the automount(8)
daemon can implement this change without kernel modifications. So that
will be done instead and the autofs module documentation updated with a
description of the problem and what needs to be done by module users for
this specific case.
Ian Kent [Thu, 30 Nov 2017 00:11:23 +0000 (16:11 -0800)]
autofs: revert "autofs: take more care to not update last_used on path walk"
While commit 092a53452bb7 ("autofs: take more care to not update
last_used on path walk") helped (partially) resolve a problem where
automounts were not expiring due to aggressive accesses from user space
it has a side effect for very large environments.
This change helps with the expire problem by making the expire more
aggressive but, for very large environments, that means more mount
requests from clients. When there are a lot of clients that can mean
fairly significant server load increases.
It turns out I put the last_used in this position to solve this very
problem and failed to update my own thinking of the autofs expire
policy. So the patch being reverted introduces a regression which
should be fixed.
Shakeel Butt [Thu, 30 Nov 2017 00:11:15 +0000 (16:11 -0800)]
mm, memcg: fix mem_cgroup_swapout() for THPs
Commit d6810d730022 ("memcg, THP, swap: make mem_cgroup_swapout()
support THP") changed mem_cgroup_swapout() to support transparent huge
page (THP).
However the patch missed one location which should be changed for
correctly handling THPs. The resulting bug will cause the memory
cgroups whose THPs were swapped out to become zombies on deletion.
Zi Yan [Thu, 30 Nov 2017 00:11:12 +0000 (16:11 -0800)]
mm: migrate: fix an incorrect call of prep_transhuge_page()
In https://lkml.org/lkml/2017/11/20/411, Andrea reported that during
memory hotplug/hot remove prep_transhuge_page() is called incorrectly on
non-THP pages for migration, when THP is on but THP migration is not
enabled. This leads to a bad state of target pages for migration.
By inspecting the code, if called on a non-THP, prep_transhuge_page()
will
1) change the value of the mapping of (page + 2), since it is used for
THP deferred list;
2) change the lru value of (page + 1), since it is used for THP's dtor.
Both can lead to data corruption of these two pages.
Andrea said:
"Pragmatically and from the point of view of the memory_hotplug subsys,
the effect is a kernel crash when pages are being migrated during a
memory hot remove offline and migration target pages are found in a
bad state"
This patch fixes it by only calling prep_transhuge_page() when we are
certain that the target page is THP.
Yisheng Xie [Thu, 30 Nov 2017 00:11:08 +0000 (16:11 -0800)]
kmemleak: add scheduling point to kmemleak_scan()
kmemleak_scan() will scan struct page for each node and it can be really
large and resulting in a soft lockup. We have seen a soft lockup when
do scan while compile kernel:
Andy Shevchenko [Thu, 30 Nov 2017 00:11:05 +0000 (16:11 -0800)]
scripts/bloat-o-meter: don't fail with division by 0
Under some circumstances it's possible to get a divider 0 which crashes
the script.
Traceback (most recent call last):
File "linux/scripts/bloat-o-meter", line 98, in <module>
print_result("Function", "tTdDbBrR", 2)
File "linux/scripts/bloat-o-meter", line 87, in print_result
(otot, ntot, (ntot - otot)*100.0/otot))
ZeroDivisionError: float division by zero
Michal Hocko [Thu, 30 Nov 2017 00:10:58 +0000 (16:10 -0800)]
Revert "mm/page-writeback.c: print a warning if the vm dirtiness settings are illogical"
This reverts commit 0f6d24f87856 ("mm/page-writeback.c: print a warning
if the vm dirtiness settings are illogical") because it causes false
positive warnings during OOM situations as noticed by Tetsuo Handa:
The problem is that both thresh and bg_thresh will be 0 if
available_memory is less than 4 pages when evaluating
global_dirtyable_memory.
While this might be worked around the whole point of the warning is
dubious at best. We do rely on admins to do sensible things when
changing tunable knobs. Dirty memory writeback knobs are not any
special in that regards so revert the warning rather than adding more
hacks to work this around.
chenjie [Thu, 30 Nov 2017 00:10:54 +0000 (16:10 -0800)]
mm/madvise.c: fix madvise() infinite loop under special circumstances
MADVISE_WILLNEED has always been a noop for DAX (formerly XIP) mappings.
Unfortunately madvise_willneed() doesn't communicate this information
properly to the generic madvise syscall implementation. The calling
convention is quite subtle there. madvise_vma() is supposed to either
return an error or update &prev otherwise the main loop will never
advance to the next vma and it will keep looping for ever without a way
to get out of the kernel.
It seems this has been broken since introduction. Nobody has noticed
because nobody seems to be using MADVISE_WILLNEED on these DAX mappings.
Kees Cook [Thu, 30 Nov 2017 00:10:51 +0000 (16:10 -0800)]
exec: avoid RLIMIT_STACK races with prlimit()
While the defense-in-depth RLIMIT_STACK limit on setuid processes was
protected against races from other threads calling setrlimit(), I missed
protecting it against races from external processes calling prlimit().
This adds locking around the change and makes sure that rlim_max is set
too.
Dan Williams [Thu, 30 Nov 2017 00:10:47 +0000 (16:10 -0800)]
IB/core: disable memory registration of filesystem-dax vmas
Until there is a solution to the dma-to-dax vs truncate problem it is
not safe to allow RDMA to create long standing memory registrations
against filesytem-dax vmas.
Dan Williams [Thu, 30 Nov 2017 00:10:43 +0000 (16:10 -0800)]
v4l2: disable filesystem-dax mapping support
V4L2 memory registrations are incompatible with filesystem-dax that
needs the ability to revoke dma access to a mapping at will, or
otherwise allow the kernel to wait for completion of DMA. The
filesystem-dax implementation breaks the traditional solution of
truncate of active file backed mappings since there is no page-cache
page we can orphan to sustain ongoing DMA.
If v4l2 wants to support long lived DMA mappings it needs to arrange to
hold a file lease or use some other mechanism so that the kernel can
coordinate revoking DMA access when the filesystem needs to truncate
mappings.
Dan Williams [Thu, 30 Nov 2017 00:10:39 +0000 (16:10 -0800)]
mm: fail get_vaddr_frames() for filesystem-dax mappings
Until there is a solution to the dma-to-dax vs truncate problem it is
not safe to allow V4L2, Exynos, and other frame vector users to create
long standing / irrevocable memory registrations against filesytem-dax
vmas.
Dan Williams [Thu, 30 Nov 2017 00:10:35 +0000 (16:10 -0800)]
mm: introduce get_user_pages_longterm
Patch series "introduce get_user_pages_longterm()", v2.
Here is a new get_user_pages api for cases where a driver intends to
keep an elevated page count indefinitely. This is distinct from usages
like iov_iter_get_pages where the elevated page counts are transient.
The iov_iter_get_pages cases immediately turn around and submit the
pages to a device driver which will put_page when the i/o operation
completes (under kernel control).
In the longterm case userspace is responsible for dropping the page
reference at some undefined point in the future. This is untenable for
filesystem-dax case where the filesystem is in control of the lifetime
of the block / page and needs reasonable limits on how long it can wait
for pages in a mapping to become idle.
Fixing filesystems to actually wait for dax pages to be idle before
blocks from a truncate/hole-punch operation are repurposed is saved for
a later patch series.
Also, allowing longterm registration of dax mappings is a future patch
series that introduces a "map with lease" semantic where the kernel can
revoke a lease and force userspace to drop its page references.
I have also tagged these for -stable to purposely break cases that might
assume that longterm memory registrations for filesystem-dax mappings
were supported by the kernel. The behavior regression this policy
change implies is one of the reasons we maintain the "dax enabled.
Warning: EXPERIMENTAL, use at your own risk" notification when mounting
a filesystem in dax mode.
It is worth noting the device-dax interface does not suffer the same
constraints since it does not support file space management operations
like hole-punch.
This patch (of 4):
Until there is a solution to the dma-to-dax vs truncate problem it is
not safe to allow long standing memory registrations against
filesytem-dax vmas. Device-dax vmas do not have this problem and are
explicitly allowed.
This is temporary until a "memory registration with layout-lease"
mechanism can be implemented for the affected sub-systems (RDMA and
V4L2).
Dan Williams [Thu, 30 Nov 2017 00:10:32 +0000 (16:10 -0800)]
device-dax: implement ->split() to catch invalid munmap attempts
Similar to how device-dax enforces that the 'address', 'offset', and
'len' parameters to mmap() be aligned to the device's fundamental
alignment, the same constraints apply to munmap(). Implement ->split()
to fail munmap calls that violate the alignment constraint.
Otherwise, we later fail VM_BUG_ON checks in the unmap_page_range() path
with crash signatures of the form:
vma ffff8800b60c8a88 start 00007f88c0000000 end 00007f88c0e00000
next (null) prev (null) mm ffff8800b61150c0
prot 8000000000000027 anon_vma (null) vm_ops ffffffffa0091240
pgoff 0 file ffff8800b638ef80 private_data (null)
flags: 0x380000fb(read|write|shared|mayread|maywrite|mayexec|mayshare|softdirty|mixedmap|hugepage)
------------[ cut here ]------------
kernel BUG at mm/huge_memory.c:2014!
[..]
RIP: 0010:__split_huge_pud+0x12a/0x180
[..]
Call Trace:
unmap_page_range+0x245/0xa40
? __vma_adjust+0x301/0x990
unmap_vmas+0x4c/0xa0
unmap_region+0xae/0x120
? __vma_rb_erase+0x11a/0x230
do_munmap+0x276/0x410
vm_munmap+0x6a/0xa0
SyS_munmap+0x1d/0x30
Dan Williams [Thu, 30 Nov 2017 00:10:28 +0000 (16:10 -0800)]
mm, hugetlbfs: introduce ->split() to vm_operations_struct
Patch series "device-dax: fix unaligned munmap handling"
When device-dax is operating in huge-page mode we want it to behave like
hugetlbfs and fail attempts to split vmas into unaligned ranges. It
would be messy to teach the munmap path about device-dax alignment
constraints in the same (hstate) way that hugetlbfs communicates this
constraint. Instead, these patches introduce a new ->split() vm
operation.
This patch (of 2):
The device-dax interface has similar constraints as hugetlbfs in that it
requires the munmap path to unmap in huge page aligned units. Rather
than add more custom vma handling code in __split_vma() introduce a new
vm operation to perform this vma specific check.
If you had, then the powerpc code would have worked ... ;-) and many
of the other interfaces in include/asm-generic/pgtable.h are
protected that way ...
Given that some architecture already define pmd_write() as a macro, it's
a net reduction to drop the definition of __HAVE_ARCH_PMD_WRITE.
Dan Williams [Thu, 30 Nov 2017 00:10:06 +0000 (16:10 -0800)]
mm: fix device-dax pud write-faults triggered by get_user_pages()
Currently only get_user_pages_fast() can safely handle the writable gup
case due to its use of pud_access_permitted() to check whether the pud
entry is writable. In the gup slow path pud_write() is used instead of
pud_access_permitted() and to date it has been unimplemented, just calls
BUG_ON().
For now this just implements a simple check for the _PAGE_RW bit similar
to pmd_write. However, this implies that the gup-slow-path check is
missing the extra checks that the gup-fast-path performs with
pud_access_permitted. Later patches will align all checks to use the
'access_permitted' helper if the architecture provides it.
Note that the generic 'access_permitted' helper fallback is the simple
_PAGE_RW check on architectures that do not define the
'access_permitted' helper(s).
Mike Kravetz [Thu, 30 Nov 2017 00:10:01 +0000 (16:10 -0800)]
mm/cma: fix alloc_contig_range ret code/potential leak
If the call __alloc_contig_migrate_range() in alloc_contig_range returns
-EBUSY, processing continues so that test_pages_isolated() is called
where there is a tracepoint to identify the busy pages. However, it is
possible for busy pages to become available between the calls to these
two routines. In this case, the range of pages may be allocated.
Unfortunately, the original return code (ret == -EBUSY) is still set and
returned to the caller. Therefore, the caller believes the pages were
not allocated and they are leaked.
Update the comment to indicate that allocation is still possible even if
__alloc_contig_migrate_range returns -EBUSY. Also, clear return code in
this case so that it is not accidentally used or returned to caller.
Wang Nan [Thu, 30 Nov 2017 00:09:58 +0000 (16:09 -0800)]
mm, oom_reaper: gather each vma to prevent leaking TLB entry
tlb_gather_mmu(&tlb, mm, 0, -1) means gathering the whole virtual memory
space. In this case, tlb->fullmm is true. Some archs like arm64
doesn't flush TLB when tlb->fullmm is true:
commit 5a7862e83000 ("arm64: tlbflush: avoid flushing when fullmm == 1").
Which causes leaking of tlb entries.
Will clarifies his patch:
"Basically, we tag each address space with an ASID (PCID on x86) which
is resident in the TLB. This means we can elide TLB invalidation when
pulling down a full mm because we won't ever assign that ASID to
another mm without doing TLB invalidation elsewhere (which actually
just nukes the whole TLB).
I think that means that we could potentially not fault on a kernel
uaccess, because we could hit in the TLB"
There could be a window between complete_signal() sending IPI to other
cores and all threads sharing this mm are really kicked off from cores.
In this window, the oom reaper may calls tlb_flush_mmu_tlbonly() to
flush TLB then frees pages. However, due to the above problem, the TLB
entries are not really flushed on arm64. Other threads are possible to
access these pages through TLB entries. Moreover, a copy_to_user() can
also write to these pages without generating page fault, causes
use-after-free bugs.
This patch gathers each vma instead of gathering full vm space. In this
case tlb->fullmm is not true. The behavior of oom reaper become similar
to munmapping before do_exit, which should be safe for all archs.
Michal Hocko [Thu, 30 Nov 2017 00:09:54 +0000 (16:09 -0800)]
mm, memory_hotplug: do not back off draining pcp free pages from kworker context
drain_all_pages backs off when called from a kworker context since
commit 0ccce3b92421 ("mm, page_alloc: drain per-cpu pages from workqueue
context") because the original IPI based pcp draining has been replaced
by a WQ based one and the check wanted to prevent from recursion and
inter workers dependencies. This has made some sense at the time
because the system WQ has been used and one worker holding the lock
could be blocked while waiting for new workers to emerge which can be a
problem under OOM conditions.
Since then commit ce612879ddc7 ("mm: move pcp and lru-pcp draining into
single wq") has moved draining to a dedicated (mm_percpu_wq) WQ with a
rescuer so we shouldn't depend on any other WQ activity to make a
forward progress so calling drain_all_pages from a worker context is
safe as long as this doesn't happen from mm_percpu_wq itself which is
not the case because all workers are required to _not_ depend on any MM
locks.
Why is this a problem in the first place? ACPI driven memory hot-remove
(acpi_device_hotplug) is executed from the worker context. We end up
calling __offline_pages to free all the pages and that requires both
lru_add_drain_all_cpuslocked and drain_all_pages to do their job
otherwise we can have dangling pages on pcp lists and fail the offline
operation (__test_page_isolated_in_pageblock would see a page with 0 ref
count but without PageBuddy set).
Fix the issue by removing the worker check in drain_all_pages.
lru_add_drain_all_cpuslocked doesn't have this restriction so it works
as expected.
Linus Torvalds [Wed, 29 Nov 2017 22:49:26 +0000 (14:49 -0800)]
Merge tag 'nfsd-4.15-1' of git://linux-nfs.org/~bfields/linux
Pull nfsd fixes from Bruce Fields:
"I screwed up my merge window pull request; I only sent half of what I
meant to.
There were no new features, just bugfixes of various importance and
some very minor cleanup, so I think it's all still appropriate for
-rc2.
Highlights:
- Fixes from Trond for some races in the NFSv4 state code.
- Fix from Naofumi Honda for a typo in the blocked lock notificiation
code
- Fixes from Vasily Averin for some problems starting and stopping
lockd especially in network namespaces"
* tag 'nfsd-4.15-1' of git://linux-nfs.org/~bfields/linux: (23 commits)
lockd: fix "list_add double add" caused by legacy signal interface
nlm_shutdown_hosts_net() cleanup
race of nfsd inetaddr notifiers vs nn->nfsd_serv change
race of lockd inetaddr notifiers vs nlmsvc_rqst change
SUNRPC: make cache_detail structures const
NFSD: make cache_detail structures const
sunrpc: make the function arg as const
nfsd: check for use of the closed special stateid
nfsd: fix panic in posix_unblock_lock called from nfs4_laundromat
lockd: lost rollback of set_grace_period() in lockd_down_net()
lockd: added cleanup checks in exit_net hook
grace: replace BUG_ON by WARN_ONCE in exit_net hook
nfsd: fix locking validator warning on nfs4_ol_stateid->st_mutex class
lockd: remove net pointer from messages
nfsd: remove net pointer from debug messages
nfsd: Fix races with check_stateid_generation()
nfsd: Ensure we check stateid validity in the seqid operation checks
nfsd: Fix race in lock stateid creation
nfsd4: move find_lock_stateid
nfsd: Ensure we don't recognise lock stateids after freeing them
...
Linus Torvalds [Wed, 29 Nov 2017 22:26:50 +0000 (14:26 -0800)]
Merge tag 'for-4.15-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"We've collected some fixes in since the pre-merge window freeze.
There's technically only one regression fix for 4.15, but the rest
seems important and candidates for stable.
- fix missing flush bio puts in error cases (is serious, but rarely
happens)
- fix reporting stat::st_blocks for buffered append writes
- fix space cache invalidation
- fix out of bound memory access when setting zlib level
- fix potential memory corruption when fsync fails in the middle
- fix crash in integrity checker
- incremetnal send fix, path mixup for certain unlink/rename
combination
- pass flags to writeback so compressed writes can be throttled
properly
- error handling fixes"
* tag 'for-4.15-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: incremental send, fix wrong unlink path after renaming file
btrfs: tree-checker: Fix false panic for sanity test
Btrfs: fix list_add corruption and soft lockups in fsync
btrfs: Fix wild memory access in compression level parser
btrfs: fix deadlock when writing out space cache
btrfs: clear space cache inode generation always
Btrfs: fix reported number of inode blocks after buffered append writes
Btrfs: move definition of the function btrfs_find_new_delalloc_bytes
Btrfs: bail out gracefully rather than BUG_ON
btrfs: dev_alloc_list is not protected by RCU, use normal list_del
btrfs: add missing device::flush_bio puts
btrfs: Fix transaction abort during failure in btrfs_rm_dev_item
Btrfs: add write_flags for compression bio
1) The forcedeth conversion from pci_*() DMA interfaces to dma_*() ones
missed one spot. From Zhu Yanjun.
2) Missing CRYPTO_SHA256 Kconfig dep in cfg80211, from Johannes Berg.
3) Fix checksum offloading in thunderx driver, from Sunil Goutham.
4) Add SPDX to vm_sockets_diag.h, from Stephen Hemminger.
5) Fix use after free of packet headers in TIPC, from Jon Maloy.
6) "sizeof(ptr)" vs "sizeof(*ptr)" bug in i40e, from Gustavo A R Silva.
7) Tunneling fixes in mlxsw driver, from Petr Machata.
8) Fix crash in fanout_demux_rollover() of AF_PACKET, from Mike
Maloney.
9) Fix race in AF_PACKET bind() vs. NETDEV_UP notifier, from Eric
Dumazet.
10) Fix regression in sch_sfq.c due to one of the timer_setup()
conversions. From Paolo Abeni.
11) SCTP does list_for_each_entry() using wrong struct member, fix from
Xin Long.
12) Don't use big endian netlink attribute read for
IFLA_BOND_AD_ACTOR_SYSTEM, it is in cpu endianness. Also from Xin
Long.
13) Fix mis-initialization of q->link.clock in CBQ scheduler, preventing
adding filters there. From Jiri Pirko.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (67 commits)
ethernet: dwmac-stm32: Fix copyright
net: via: via-rhine: use %p to format void * address instead of %x
net: ethernet: xilinx: Mark XILINX_LL_TEMAC broken on 64-bit
myri10ge: Update MAINTAINERS
net: sched: cbq: create block for q->link.block
atm: suni: remove extraneous space to fix indentation
atm: lanai: use %p to format kernel addresses instead of %x
VSOCK: Don't set sk_state to TCP_CLOSE before testing it
atm: fore200e: use %pK to format kernel addresses instead of %x
ambassador: fix incorrect indentation of assignment statement
vxlan: use __be32 type for the param vni in __vxlan_fdb_delete
bonding: use nla_get_u64 to extract the value for IFLA_BOND_AD_ACTOR_SYSTEM
sctp: use right member as the param of list_for_each_entry
sch_sfq: fix null pointer dereference at timer expiration
cls_bpf: don't decrement net's refcount when offload fails
net/packet: fix a race in packet_bind() and packet_notifier()
packet: fix crash in fanout_demux_rollover()
sctp: remove extern from stream sched
sctp: force the params with right types for sctp csum apis
sctp: force SCTP_ERROR_INV_STRM with __u32 when calling sctp_chunk_fail
...
David S. Miller [Wed, 29 Nov 2017 20:09:29 +0000 (15:09 -0500)]
sparc64: Fix boot on T4 and later.
If we don't put the NG4fls.o object into the same part of
the link as the generic sparc64 objects for fls() and __fls()
then the relocation in the branch we use for patching will
not fit.
Move NG4fls.o into lib-y to fix this problem.
Fixes: 46ad8d2d22c1 ("sparc64: Use sparc optimized fls and __fls for T4 and above") Signed-off-by: David S. Miller <[email protected]> Reported-by: Anatoly Pugachev <[email protected]> Tested-by: Anatoly Pugachev <[email protected]>
Oded Gabbay [Wed, 29 Nov 2017 16:26:56 +0000 (17:26 +0100)]
drm/radeon: remove init of CIK VMIDs 8-16 for amdkfd
VMIDs 8-16 in Kaveri were reserved for use by the amdkfd driver.
Because we removed amdkfd support from radeon, those VMIDs are now
used by radeon and are initialized by radeon.
This patch removes the function that initialized those VMIDs for amdkfd
use.
This initialization overridden the radeon initialization and caused GPU
faults and GUI crashed.
Linus Torvalds [Wed, 29 Nov 2017 19:28:09 +0000 (11:28 -0800)]
vsprintf: don't use 'restricted_pointer()' when not restricting
Instead, just fall back on the new '%p' behavior which hashes the
pointer.
Otherwise, '%pK' - that was intended to mark a pointer as restricted -
just ends up leaking pointers that a normal '%p' wouldn't leak. Which
just make the whole thing pointless.
I suspect we should actually get rid of '%pK' entirely, and make it just
work as '%p' regardless, but this is the minimal obvious fix. People
who actually use 'kptr_restrict' should weigh in on which behavior they
want.
Linus Torvalds [Wed, 29 Nov 2017 18:30:13 +0000 (10:30 -0800)]
kallsyms: take advantage of the new '%px' format
The conditional kallsym hex printing used a special fixed-width '%lx'
output (KALLSYM_FMT) in preparation for the hashing of %p, but that
series ended up adding a %px specifier to help with the conversions.
Use it, and avoid the "print pointer as an unsigned long" code.
Linus Torvalds [Wed, 29 Nov 2017 18:19:29 +0000 (10:19 -0800)]
Merge tag 'printk-hash-pointer-4.15-rc2' of git://github.com/tcharding/linux
Pull printk pointer hashing update from Tobin Harding:
"Here is the patch set that implements hashing of printk specifier %p.
First we have two clean up patches then we do the hashing. Hashing is
done via the SipHash algorithm. The next patch adds printk specifier
%px for printing pointers when we _really_ want to see the address i.e
%px is functionally equivalent to %lx. Final patch in the set fixes
KASAN since we break it by hashing %p.
For the record here is the justification for the series:
Currently there exist approximately 14 000 places in the Kernel
where addresses are being printed using an unadorned %p. This
potentially leaks sensitive information about the Kernel layout in
memory. Many of these calls are stale, instead of fixing every call
we hash the address by default before printing. We then add %px to
provide a way to print the actual address. Although this is
achievable using %lx, using %px will assist us if we ever want to
change pointer printing behaviour. %px is more uniquely grep'able
(there are already >50 000 uses of %lx).
The added advantage of hashing %p is that security is now opt-out,
if you _really_ want the address you have to work a little harder
and use %px.
This will of course break some users, forcing code printing needed
addresses to be updated"
[ I do expect this to be an annoyance, and a number of %px users to be
added for debuggability. But nobody is willing to audit existing %p
users for information leaks, and a number of places really only use
the pointer as an object identifier rather than really 'I need the
address'.
IOW - sorry for the inconvenience, but it's the least inconvenient of
the options. - Linus ]
* tag 'printk-hash-pointer-4.15-rc2' of git://github.com/tcharding/linux:
kasan: use %px to print addresses instead of %p
vsprintf: add printk specifier %px
printk: hash addresses printed with %p
vsprintf: refactor %pK code out of pointer()
docs: correct documentation for %pK
It was a nice cleanup in theory, but as Nicolai Stange points out, we do
need to make the page dirty for the copy-on-write case even when we
didn't end up making it writable, since the dirty bit is what we use to
check that we've gone through a COW cycle.
Jens Axboe [Wed, 29 Nov 2017 16:21:50 +0000 (09:21 -0700)]
Merge branch 'nvme-4.15' of git://git.infradead.org/nvme into for-linus
Pull NVMe fixes from Christoph:
"A few more nvme updates for 4.15. A single small PCIe fix, and a number
of patches for RDMA that are a little larger than what I'd like to see
for -rc2, but they fix important issues seen in the wild."
Tetsuo Handa [Wed, 29 Nov 2017 13:34:50 +0000 (22:34 +0900)]
quota: Check for register_shrinker() failure.
register_shrinker() might return -ENOMEM error since Linux 3.12.
Call panic() as with other failure checks in this function if
register_shrinker() failed.
net: ethernet: xilinx: Mark XILINX_LL_TEMAC broken on 64-bit
On 64-bit (e.g. powerpc64/allmodconfig):
drivers/net/ethernet/xilinx/ll_temac_main.c: In function 'temac_start_xmit_done':
drivers/net/ethernet/xilinx/ll_temac_main.c:633:22: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
dev_kfree_skb_irq((struct sk_buff *)cur_p->app4);
^
cdmac_bd.app4 is u32, so it is too small to hold a kernel pointer.
Note that several other fields in struct cdmac_bd are also too small to
hold physical addresses on 64-bit platforms.
drm/fb_helper: Disable all crtc's when initial setup fails.
Some drivers like i915 start with crtc's enabled, but with deferred
fbcon setup they were no longer disabled as part of fbdev setup.
Headless units could no longer enter pc3 state because the crtc was
still enabled.
Fix this by calling restore_fbdev_mode when we would have called
it otherwise once during initial fbdev setup.
Lucas Stach [Wed, 29 Nov 2017 11:04:31 +0000 (12:04 +0100)]
drm/atomic: make drm_atomic_helper_wait_for_vblanks more agressive
drm_atomic_helper_setup_commit expects that flipping of previous commits
has happened when it is called to set up a new commit. This can be violated
by commits where userspace doesn't get a flip completion event to
synchronize against i.e. legacy modesets and property changes.
The expectation is that those are done by blocking commits, which wait for
completion. Most drivers call drm_atomic_helper_wait_for_vblanks in the
commit_tail to ensure completion, but the wait for next vblank might not
actually happen if the commit didn't change any planes.
Make the wait more agressive by also waiting if no planes changed. This
is the minimal regression fix for the 4.15 kernel series. Long term
drivers should switch away from drm_atomic_helper_wait_for_vblanks and
use drm_atomic_helper_wait_for_flip_done instead.
Vaibhav Jain [Fri, 24 Nov 2017 08:33:38 +0000 (14:03 +0530)]
powerpc: Do not assign thread.tidr if already assigned
If set_thread_tidr() is called twice for same task_struct then it will
allocate a new tidr value to it leaving the previous value still
dangling in the vas_thread_ida table.
To fix this the patch changes set_thread_tidr() to check if a tidr
value is already assigned to the task_struct and if yes then returns
zero.
Fixes: ec233ede4c86("powerpc: Add support for setting SPRN_TIDR") Signed-off-by: Vaibhav Jain <[email protected]> Reviewed-by: Andrew Donnellan <[email protected]>
[mpe: Modify to return 0 in the success case, not the TID value] Signed-off-by: Michael Ellerman <[email protected]>
Vaibhav Jain [Tue, 28 Nov 2017 02:53:04 +0000 (08:23 +0530)]
powerpc: Avoid signed to unsigned conversion in set_thread_tidr()
There is an unsafe signed to unsigned conversion in set_thread_tidr()
that may cause an error value to be assigned to SPRN_TIDR register and
used as thread-id.
The issue happens as assign_thread_tidr() returns an int and
thread.tidr is an unsigned-long. So a negative error code returned
from assign_thread_tidr() will fail the error check and gets assigned
as tidr as a large positive value.
To fix this the patch assigns the return value of assign_thread_tidr()
to a temporary int and assigns it to thread.tidr iff its '> 0'.
The patch shouldn't impact the calling convention of set_thread_tidr()
i.e all -ve return-values are error codes and a return value of '0'
indicates success.
Fixes: ec233ede4c86("powerpc: Add support for setting SPRN_TIDR") Signed-off-by: Vaibhav Jain <[email protected]> Reviewed-by: Christophe Lombard [email protected] Signed-off-by: Michael Ellerman <[email protected]>
projects / linux.git / log