Paul Cercueil [Thu, 31 Mar 2022 16:42:00 +0000 (17:42 +0100)]
MIPS: crypto: Fix CRC32 code
Commit 67512a8cf5a7 ("MIPS: Avoid macro redefinitions") changed how the
MIPS register macros were defined, in order to allow the code to compile
under LLVM/Clang.
The MIPS CRC32 code however wasn't updated accordingly, causing a build
bug when using a MIPS32r6 toolchain without CRC support.
Update the CRC32 code to use the macros correctly, to fix the build
failures.
dma-mapping: move pgprot_decrypted out of dma_pgprot
pgprot_decrypted is used by AMD SME systems to allow access to memory
that was set to not encrypted using set_memory_decrypted. That only
happens for dma-direct memory as the IOMMU solves the addressing
challenges for the encryption bit using its own remapping.
Move the pgprot_decrypted call out of dma_pgprot which is also used
by the IOMMU mappings and into dma-direct so that it is only used with
memory that was set decrypted.
Fixes: f5ff79fddf0e ("dma-mapping: remove CONFIG_DMA_REMAP") Reported-by: Alex Xu (Hello71) <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Tested-by: Alex Xu (Hello71) <[email protected]>
The touchpad present in the Dell Precision 7550 and 7750 laptops
reports a HID_DG_BUTTONTYPE of type MT_BUTTONTYPE_CLICKPAD. However,
the device is not a clickpad, it is a touchpad with physical buttons.
In order to fix this issue, a quirk for the device was introduced in
libinput [1] [2] to disable the INPUT_PROP_BUTTONPAD property:
However, because of the change introduced in 37ef4c19b4 ("Input: clear
BTN_RIGHT/MIDDLE on buttonpads") the BTN_RIGHT key bit is not mapped
anymore breaking the device right click button and making impossible to
workaround it in user space.
In order to avoid breakage on other present or future devices, revert
the patch causing the issue.
Yuezhang Mo [Sat, 19 Mar 2022 02:08:03 +0000 (11:08 +0900)]
exfat: do not clear VolumeDirty in writeback
Before this commit, VolumeDirty will be cleared first in
writeback if 'dirsync' or 'sync' is not enabled. If the power
is suddenly cut off after cleaning VolumeDirty but other
updates are not written, the exFAT filesystem will not be able
to detect the power failure in the next mount.
And VolumeDirty will be set again but not cleared when updating
the parent directory. It means that BootSector will be written at
least once in each write-back, which will shorten the life of the
device.
Vasant Karasulli [Thu, 17 Mar 2022 09:50:47 +0000 (10:50 +0100)]
exfat: allow access to paths with trailing dots
The Linux kernel exfat driver currently unconditionally strips
trailing periods '.' from path components. This isdone intentionally,
loosely following Windows behaviour and specifications
which state:
#exFAT
The concatenated file name has the same set of illegal characters as
other FAT-based file systems (see Table 31).
#FAT
...
Leading and trailing spaces in a long name are ignored.
Leading and embedded periods are allowed in a name and are stored in
the long name. Trailing periods are ignored.
Note: Leading and trailing space ' ' characters are currently retained
by Linux kernel exfat, in conflict with the above specification.
On Windows 10, trailing and leading space ' ' characters are stripped
from the filenames.
Some implementations, such as fuse-exfat, don't perform path trailer
removal. When mounting images which contain trailing-dot paths, these
paths are unreachable, e.g.:
+ mount.exfat-fuse /dev/zram0 /mnt/test/
FUSE exfat 1.3.0
+ cd /mnt/test/
+ touch fuse_created_dots... ' fuse_created_spaces '
+ ls -l
total 0
-rwxrwxrwx 1 root 0 0 Aug 18 09:45 ' fuse_created_spaces '
-rwxrwxrwx 1 root 0 0 Aug 18 09:45 fuse_created_dots...
+ cd /
+ umount /mnt/test/
+ mount -t exfat /dev/zram0 /mnt/test
+ cd /mnt/test
+ ls -l
ls: cannot access 'fuse_created_dots...': No such file or directory
total 0
-rwxr-xr-x 1 root 0 0 Aug 18 09:45 ' fuse_created_spaces '
-????????? ? ? ? ? ? fuse_created_dots...
+ touch kexfat_created_dots... ' kexfat_created_spaces '
+ ls -l
ls: cannot access 'fuse_created_dots...': No such file or directory
total 0
-rwxr-xr-x 1 root 0 0 Aug 18 09:45 ' fuse_created_spaces '
-rwxr-xr-x 1 root 0 0 Aug 18 09:45 ' kexfat_created_spaces '
-????????? ? ? ? ? ? fuse_created_dots...
-rwxr-xr-x 1 root 0 0 Aug 18 09:45 kexfat_created_dots
+ cd /
+ umount /mnt/test/
This commit adds "keep_last_dots" mount option that controls whether or
not trailing periods '.' are stripped
from path components during file lookup or file creation.
This mount option can be used to access
paths with trailing periods and disallow creating files with names with
trailing periods. E.g. continuing from the previous example:
+ mount -t exfat -o keep_last_dots /dev/zram0 /mnt/test
+ cd /mnt/test
+ ls -l
total 0
-rwxr-xr-x 1 root 0 0 Aug 18 10:32 ' fuse_created_spaces '
-rwxr-xr-x 1 root 0 0 Aug 18 10:32 ' kexfat_created_spaces '
-rwxr-xr-x 1 root 0 0 Aug 18 10:32 fuse_created_dots...
-rwxr-xr-x 1 root 0 0 Aug 18 10:32 kexfat_created_dots
Palmer Dabbelt [Wed, 30 Mar 2022 23:47:38 +0000 (16:47 -0700)]
RISC-V: K210 defconfigs: Drop redundant MEMBARRIER=n
As of 93917ad50972 ("RISC-V: Add support for restartable sequence") we
have support for restartable sequences, which default to enabled. These
select MEMBARRIER, so disabling it is now redundant.
Palmer Dabbelt [Wed, 30 Mar 2022 23:47:37 +0000 (16:47 -0700)]
RISC-V: defconfig: Drop redundant SBI HVC and earlycon
As of 3938d5a2f936 ("riscv: default to CONFIG_RISCV_SBI_V01=n") we no
longer default to enabling SBI-0.1 support, so these dependent configs
no longer have any effect. Remove them to avoid clutter.
Tzung-Bi Shih [Wed, 9 Feb 2022 05:11:30 +0000 (13:11 +0800)]
platform/chrome: cros_ec_debugfs: detach log reader wq from devm
Debugfs console_log uses devm memory (e.g. debug_info in
cros_ec_console_log_poll()). However, lifecycles of device and debugfs
are independent. An use-after-free issue is observed if userland
program operates the debugfs after the memory has been freed.
The call trace:
do_raw_spin_lock
_raw_spin_lock_irqsave
remove_wait_queue
ep_unregister_pollwait
ep_remove
do_epoll_ctl
A Python example to reproduce the issue:
... import select
... p = select.epoll()
... f = open('/sys/kernel/debug/cros_scp/console_log')
... p.register(f, select.POLLIN)
... p.poll(1)
[(4, 1)] # 4=fd, 1=select.POLLIN
Gwendal Grignou [Sat, 22 Jan 2022 00:13:01 +0000 (16:13 -0800)]
platform: chrome: Split trace include file
cros_ec_trace.h defined 5 tracing events, 2 for cros_ec_proto and
3 for cros_ec_sensorhub_ring.
These 2 files are in different kernel modules, the traces are defined
twice in the kernel which leads to problem enabling only some traces.
Move sensorhub traces from cros_ec_trace.h to cros_ec_sensorhub_trace.h
and enable them only in cros_ec_sensorhub kernel module.
Check we can now enable any single traces: without this patch,
we can only enable all sensorhub traces or none.
Bagas Sanjaya [Tue, 29 Mar 2022 08:44:28 +0000 (15:44 +0700)]
Documentation: riscv: remove non-existent directory from table of contents
This subdir no longer exists: it was there to document some of the
quirks and paths forward for handling them, but those have been dealt
with as of Atish's recent patch set.
Linus Torvalds [Thu, 31 Mar 2022 23:16:58 +0000 (16:16 -0700)]
Merge tag 'for-linus-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:
- Devicetree support (for testing)
- Various cleanups and fixes: UBD, port_user, uml_mconsole
- Maintainer update
* tag 'for-linus-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: run_helper: Write error message to kernel log on exec failure on host
um: port_user: Improve error handling when port-helper is not found
um: port_user: Allow setting path to port-helper using UML_PORT_HELPER envvar
um: port_user: Search for in.telnetd in PATH
um: clang: Strip out -mno-global-merge from USER_CFLAGS
docs: UML: Mention telnetd for port channel
um: Remove unused timeval_to_ns() function
um: Fix uml_mconsole stop/go
um: Cleanup syscall_handler_t definition/cast, fix warning
uml: net: vector: fix const issue
um: Fix WRITE_ZEROES in the UBD Driver
um: Migrate vector drivers to NAPI
um: Fix order of dtb unflatten/early init
um: fix and optimize xor select template for CONFIG64 and timetravel mode
um: Document dtb command line option
lib/logic_iomem: correct fallback config references
um: Remove duplicated include in syscalls_64.c
MAINTAINERS: Update UserModeLinux entry
Linus Torvalds [Thu, 31 Mar 2022 23:09:41 +0000 (16:09 -0700)]
Merge tag 'for-linus-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull JFFS2, UBI and UBIFS updates from Richard Weinberger:
"JFFS2:
- Fixes for various memory issues
UBI:
- Fix for a race condition in cdev ioctl handler
UBIFS:
- Fixes for O_TMPFILE and whiteout handling
- Fixes for various memory issues"
* tag 'for-linus-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubifs: rename_whiteout: correct old_dir size computing
jffs2: fix memory leak in jffs2_scan_medium
jffs2: fix memory leak in jffs2_do_mount_fs
jffs2: fix use-after-free in jffs2_clear_xattr_subsystem
fs/jffs2: fix comments mentioning i_mutex
ubi: fastmap: Return error code if memory allocation fails in add_aeb()
ubifs: Fix to add refcount once page is set private
ubifs: Fix read out-of-bounds in ubifs_wbuf_write_nolock()
ubifs: setflags: Make dirtied_ino_d 8 bytes aligned
ubifs: Rectify space amount budget for mkdir/tmpfile operations
ubifs: Fix 'ui->dirty' race between do_tmpfile() and writeback work
ubifs: Rename whiteout atomically
ubifs: Add missing iput if do_tmpfile() failed in rename whiteout
ubifs: Fix wrong number of inodes locked by ui_mutex in ubifs_inode comment
ubifs: Fix deadlock in concurrent rename whiteout and inode writeback
ubifs: rename_whiteout: Fix double free for whiteout_ui->data
ubi: Fix race condition between ctrl_cdev_ioctl and ubi_cdev_ioctl
Jakob Koschel [Thu, 31 Mar 2022 22:03:49 +0000 (00:03 +0200)]
drbd: remove check of list iterator against head past the loop body
When list_for_each_entry() completes the iteration over the whole list
without breaking the loop, the iterator value will be a bogus pointer
computed based on the head element.
While it is safe to use the pointer to determine if it was computed
based on the head element, either with list_entry_is_head() or
&pos->member == head, using the iterator variable after the loop should
be avoided.
In preparation to limit the scope of a list iterator to the list
traversal loop, use a dedicated pointer to point to the found element [1].
Linus Torvalds [Thu, 31 Mar 2022 22:57:50 +0000 (15:57 -0700)]
Merge tag 'gfs2-v5.17-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fixes from Andreas Gruenbacher:
- To avoid deadlocks, actively cancel dlm locking requests when we give
up on them.
Further dlm operations on the same lock will return -EBUSY until the
cancel has been completed, so in that case, wait and repeat. (This is
rare.)
- Lock inversion fixes in gfs2_inode_lookup() and gfs2_create_inode().
- Some more fallout from the gfs2 mmap + page fault deadlock fixes
(merged in commit c03098d4b9ad7: "Merge tag 'gfs2-v5.15-rc5-mmap-fault'").
- Various other minor bug fixes and cleanups.
* tag 'gfs2-v5.17-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Make sure FITRIM minlen is rounded up to fs block size
gfs2: Make sure not to return short direct writes
gfs2: Remove dead code in gfs2_file_read_iter
gfs2: Fix gfs2_file_buffered_write endless loop workaround
gfs2: Minor retry logic cleanup
gfs2: Disable page faults during lockless buffered reads
gfs2: Fix should_fault_in_pages() logic
gfs2: Remove return value for gfs2_indirect_init
gfs2: Initialize gh_error in gfs2_glock_nq
gfs2: Make use of list_is_first
gfs2: Switch lock order of inode and iopen glock
gfs2: cancel timed-out glock requests
gfs2: Expect -EBUSY after canceling dlm locking requests
gfs2: gfs2_setattr_size error path fix
gfs2: assign rgrp glock before compute_bitstructs
Linus Torvalds [Thu, 31 Mar 2022 22:49:36 +0000 (15:49 -0700)]
Merge tag 'netfs-prep-20220318' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull netfs updates from David Howells:
"Netfs prep for write helpers.
Having had a go at implementing write helpers and content encryption
support in netfslib, it seems that the netfs_read_{,sub}request
structs and the equivalent write request structs were almost the same
and so should be merged, thereby requiring only one set of
alloc/get/put functions and a common set of tracepoints.
Merging the structs also has the advantage that if a bounce buffer is
added to the request struct, a read operation can be performed to fill
the bounce buffer, the contents of the buffer can be modified and then
a write operation can be performed on it to send the data wherever it
needs to go using the same request structure all the way through. The
I/O handlers would then transparently perform any required crypto.
This should make it easier to perform RMW cycles if needed.
The potentially common functions and structs, however, by their names
all proclaim themselves to be associated with the read side of things.
The bulk of these changes alter this in the following ways:
- Rename struct netfs_read_{,sub}request to netfs_io_{,sub}request.
- Rename some enums, members and flags to make them more appropriate.
- Adjust some comments to match.
- Drop "read"/"rreq" from the names of common functions. For
instance, netfs_get_read_request() becomes netfs_get_request().
- The ->init_rreq() and ->issue_op() methods become ->init_request()
and ->issue_read(). I've kept the latter as a read-specific
function and in another branch added an ->issue_write() method.
The driver source is then reorganised into a number of files:
fs/netfs/buffered_read.c Create read reqs to the pagecache
fs/netfs/io.c Dispatchers for read and write reqs
fs/netfs/main.c Some general miscellaneous bits
fs/netfs/objects.c Alloc, get and put functions
fs/netfs/stats.c Optional procfs statistics.
and future development can be fitted into this scheme, e.g.:
fs/netfs/buffered_write.c Modify the pagecache
fs/netfs/buffered_flush.c Writeback from the pagecache
fs/netfs/direct_read.c DIO read support
fs/netfs/direct_write.c DIO write support
fs/netfs/unbuffered_write.c Write modifications directly back
Beyond the above changes, there are also some changes that affect how
things work:
- Make fscache_end_operation() generally available.
- In the netfs tracing header, generate enums from the symbol ->
string mapping tables rather than manually coding them.
- Add a struct for filesystems that uses netfslib to put into their
inode wrapper structs to hold extra state that netfslib is
interested in, such as the fscache cookie. This allows netfslib
functions to be set in filesystem operation tables and jumped to
directly without having to have a filesystem wrapper.
- Add a member to the struct added above to track the remote inode
length as that may differ if local modifications are buffered. We
may need to supply an appropriate EOF pointer when storing data (in
AFS for example).
- Pass extra information to netfs_alloc_request() so that the
->init_request() hook can access it and retain information to
indicate the origin of the operation.
- Make the ->init_request() hook return an error, thereby allowing a
filesystem that isn't allowed to cache an inode (ceph or cifs, for
example) to skip readahead.
- Switch to using refcount_t for subrequests and add tracepoints to
log refcount changes for the request and subrequest structs.
- Add a function to consolidate dispatching a read request. Similar
code is used in three places and another couple are likely to be
added in the future"
Link: https://lore.kernel.org/all/[email protected]/
* tag 'netfs-prep-20220318' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Maintain netfs_i_context::remote_i_size
netfs: Keep track of the actual remote file size
netfs: Split some core bits out into their own file
netfs: Split fs/netfs/read_helper.c
netfs: Rename read_helper.c to io.c
netfs: Prepare to split read_helper.c
netfs: Add a function to consolidate beginning a read
netfs: Add a netfs inode context
ceph: Make ceph_init_request() check caps on readahead
netfs: Change ->init_request() to return an error code
netfs: Refactor arguments for netfs_alloc_read_request
netfs: Adjust the netfs_failure tracepoint to indicate non-subreq lines
netfs: Trace refcounting on the netfs_io_subrequest struct
netfs: Trace refcounting on the netfs_io_request struct
netfs: Adjust the netfs_rreq tracepoint slightly
netfs: Split netfs_io_* object handling out
netfs: Finish off rename of netfs_read_request to netfs_io_request
netfs: Rename netfs_read_*request to netfs_io_*request
netfs: Generate enums from trace symbol mapping lists
fscache: export fscache_end_operation()
Randy Dunlap [Mon, 28 Mar 2022 22:04:17 +0000 (15:04 -0700)]
riscv: cpu.c: don't use kernel-doc markers for comments
Repair kernel-doc build warnings caused by using "/**" kernel-doc
markers for comments that are not in kernel-doc format:
cpu.c:89: warning: cannot understand function prototype: 'struct riscv_isa_ext_data isa_ext_arr[] = '
cpu.c:114: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Linus Torvalds [Thu, 31 Mar 2022 21:51:34 +0000 (14:51 -0700)]
Merge tag 'random-5.18-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator fixes from Jason Donenfeld:
- If a hardware random number generator passes a sufficiently large
chunk of entropy to random.c during early boot, we now skip the
"fast_init" business and let it initialize the RNG.
This makes CONFIG_RANDOM_TRUST_BOOTLOADER=y actually useful.
- We already have the command line `random.trust_cpu=0/1` option for
RDRAND, which let distros enable CONFIG_RANDOM_TRUST_CPU=y while
placating concerns of more paranoid users.
Now we add `random.trust_bootloader=0/1` so that distros can
similarly enable CONFIG_RANDOM_TRUST_BOOTLOADER=y.
- Re-add a comment that got removed by accident in the recent revert.
- Add the spec-compliant ACPI CID for vmgenid, which Microsoft added to
the vmgenid spec at Ard's request during earlier review.
- Restore build-time randomness via the latent entropy plugin, which
was lost when we transitioned to using a hash function.
* tag 'random-5.18-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
random: mix build-time latent entropy into pool at init
virt: vmgenid: recognize new CID added by Hyper-V
random: re-add removed comment about get_random_{u32,u64} reseeding
random: treat bootloader trust toggle the same way as cpu trust toggle
random: skip fast_init if hwrng provides large chunk of entropy
Linus Torvalds [Thu, 31 Mar 2022 21:14:03 +0000 (14:14 -0700)]
Merge tag 'linux-watchdog-5.18-rc1' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- add support for BCM4908
- renesas_wdt: add R-Car Gen4 support
- improve watchdog_dev function documentation
- sp5100_tco: replace the cd6h/cd7h port I/O with MMIO accesses during
initialization
- several other small improvements and fixes
* tag 'linux-watchdog-5.18-rc1' of git://www.linux-watchdog.org/linux-watchdog:
Watchdog: sp5100_tco: Enable Family 17h+ CPUs
Watchdog: sp5100_tco: Add initialization using EFCH MMIO
Watchdog: sp5100_tco: Refactor MMIO base address initialization
Watchdog: sp5100_tco: Move timer initialization into function
watchdog: ixp4xx: Implement restart
watchdog: orion_wdt: support pretimeout on Armada-XP
watchdog: allow building BCM7038_WDT for BCM4908
watchdog: renesas_wdt: Add R-Car Gen4 support
dt-bindings: watchdog: renesas-wdt: Document r8a779f0 support
watchdog: Improve watchdog_dev function documentation
watchdog: aspeed: add nowayout support
watchdog: rti-wdt: Add missing pm_runtime_disable() in probe function
watchdog: imx2_wdg: Alow ping on suspend
Linus Torvalds [Thu, 31 Mar 2022 21:05:05 +0000 (14:05 -0700)]
Merge tag 'auxdisplay-for-linus-v5.18-rc1' of https://github.com/ojeda/linux
Pull auxdisplay updates from Miguel Ojeda:
"A few auxdisplay lcd2s improvements from Andy Shevchenko"
* tag 'auxdisplay-for-linus-v5.18-rc1' of https://github.com/ojeda/linux:
auxdisplay: lcd2s: Use array size explicitly in lcd2s_gotoxy()
auxdisplay: lcd2s: Switch to i2c ->probe_new()
auxdisplay: lcd2s: use module_i2c_driver to simplify the code
auxdisplay: lcd2s: make use of device property API
auxdisplay: lcd2s: Fix multi-line comment style
Linus Torvalds [Thu, 31 Mar 2022 20:57:15 +0000 (13:57 -0700)]
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- vdpa generic device type support
- more virtio hardening for broken devices (but on the same theme,
revert some virtio hotplug hardening patches - they were misusing
some interrupt flags and had to be reverted)
- RSS support in virtio-net
- max device MTU support in mlx5 vdpa
- akcipher support in virtio-crypto
- shared IRQ support in ifcvf vdpa
- a minor performance improvement in vhost
- enable virtio mem for ARM64
- beginnings of advance dma support
- cleanups, fixes all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (33 commits)
vdpa/mlx5: Avoid processing works if workqueue was destroyed
vhost: handle error while adding split ranges to iotlb
vdpa: support exposing the count of vqs to userspace
vdpa: change the type of nvqs to u32
vdpa: support exposing the config size to userspace
vdpa/mlx5: re-create forwarding rules after mac modified
virtio: pci: check bar values read from virtio config space
Revert "virtio_pci: harden MSI-X interrupts"
Revert "virtio-pci: harden INTX interrupts"
drivers/net/virtio_net: Added RSS hash report control.
drivers/net/virtio_net: Added RSS hash report.
drivers/net/virtio_net: Added basic RSS support.
drivers/net/virtio_net: Fixed padded vheader to use v1 with hash.
virtio: use virtio_device_ready() in virtio_device_restore()
tools/virtio: compile with -pthread
tools/virtio: fix after premapped buf support
virtio_ring: remove flags check for unmap packed indirect desc
virtio_ring: remove flags check for unmap split indirect desc
virtio_ring: rename vring_unmap_state_packed() to vring_unmap_extra_packed()
net/mlx5: Add support for configuring max device MTU
...
random: mix build-time latent entropy into pool at init
Prior, the "input_pool_data" array needed no real initialization, and so
it was easy to mark it with __latent_entropy to populate it during
compile-time. In switching to using a hash function, this required us to
specifically initialize it to some specific state, which means we
dropped the __latent_entropy attribute. An unfortunate side effect was
this meant the pool was no longer seeded using compile-time random data.
In order to bring this back, we declare an array in rand_initialize()
with __latent_entropy and call mix_pool_bytes() on that at init, which
accomplishes the same thing as before. We make this __initconst, so that
it doesn't take up space at runtime after init.
Fixes: 6e8ec2552c7d ("random: use computational hash for entropy extraction") Reviewed-by: Dominik Brodowski <[email protected]> Reviewed-by: Theodore Ts'o <[email protected]> Signed-off-by: Jason A. Donenfeld <[email protected]>
Tony Lindgren [Thu, 31 Mar 2022 17:17:37 +0000 (20:17 +0300)]
ARM: OMAP2+: Fix regression for smc calls for vmap stack
Commit 9c46929e7989 ("ARM: implement THREAD_INFO_IN_TASK for uniprocessor
systems") started triggering an issue with smc calls hanging on boot as
VMAP_STACK is now enabled by default.
Based on discussions on the #armlinux irc channel, Arnd noticed that omaps
are using __pa() for stack for smc calls. This does not work with vmap
stack.
Let's fix the issue by changing the param arrays to use static param[5] for
each function for __pa() to work. This consumes a bit more memory compared
to adding a single static buffer, but avoids potential races with the smc
calls initializing the shared buffer. For omap_secure_dispatcher(), we need
to use a cpu specific buffer as there's nothing currently ensuring it only
gets called from cpu0.
Linus Torvalds [Thu, 31 Mar 2022 20:08:13 +0000 (13:08 -0700)]
Merge tag 'acpi-5.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These are fixes and cleanup on top of the previously merged ACPI
material.
Specifics:
- Avoid out-of-bounds access when parsing _CPC data (Rafael Wysocki)
- Change default error code and clean up debug messages in ACPI CPPC
probe (Rafael Wysocki)
- Replace usage of found with dedicated list iterator variable in the
ACPI IPMI driver (Jakob Koschel)
- Clean up variable name confusion in APEI (Jakob Koschel)
- Make LAPIC_ADDR_OVR address readable in a message parsed during
MADT parsing (Vasant Hegde)"
* tag 'acpi-5.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: CPPC: Change default error code and clean up debug messages in probe
ACPI: CPPC: Avoid out of bounds access when parsing _CPC data
ACPI: tables: Make LAPIC_ADDR_OVR address readable in message
ACPI: IPMI: replace usage of found with dedicated list iterator variable
ACPI, APEI: Use the correct variable for sizeof()
Linus Torvalds [Thu, 31 Mar 2022 19:10:42 +0000 (12:10 -0700)]
Merge tag 'docs-5.18-2' of git://git.lwn.net/linux
Pull more documentation updates from Jonathan Corbet:
"Some late-arriving documentation improvements.
This is mostly build-system fixes from Mauro and Akira; I also took
the liberty of dropping in my 'messy diffstat' document"
* tag 'docs-5.18-2' of git://git.lwn.net/linux:
docs: Add a document on how to fix a messy diffstat
docs: sphinx/requirements: Limit jinja2<3.1
Documentation: kunit: Fix cross-referencing warnings
scripts/kernel-doc: change the line number meta info
scripts/get_abi: change the file/line number meta info
docs: kernel_include.py: add sphinx build dependencies
docs: kernel_abi.py: add sphinx build dependencies
docs: kernel_feat.py: add build dependencies
scripts/get_feat.pl: allow output the parsed file names
docs: kfigure.py: Don't warn of missing PDF converter in 'make htmldocs'
Documentation: Fix duplicate statement about raw_spinlock_t type
Linus Torvalds [Thu, 31 Mar 2022 18:59:03 +0000 (11:59 -0700)]
Merge tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
additional flags to be passed to user-space programs.
- Fix missing fflush() bugs in Kconfig and fixdep
- Fix a minor bug in the comment format of the .config file
- Make kallsyms ignore llvm's local labels, .L*
- Fix UAPI compile-test for cross-compiling with Clang
- Extend the LLVM= syntax to support LLVM=<suffix> form for using a
particular version of LLVm, and LLVM=<prefix> form for using custom
LLVM in a particular directory path.
- Clean up Makefiles
* tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Make $(LLVM) more flexible
kbuild: add --target to correctly cross-compile UAPI headers with Clang
fixdep: use fflush() and ferror() to ensure successful write to files
arch: syscalls: simplify uapi/kapi directory creation
usr/include: replace extra-y with always-y
certs: simplify empty certs creation in certs/Makefile
certs: include certs/signing_key.x509 unconditionally
kallsyms: ignore all local labels prefixed by '.L'
kconfig: fix missing '# end of' for empty menu
kconfig: add fflush() before ferror() check
kbuild: replace $(if A,A,B) with $(or A,B)
kbuild: Add environment variables for userprogs flags
kbuild: unify cmd_copy and cmd_shipped
Tom Rix [Thu, 31 Mar 2022 18:54:58 +0000 (11:54 -0700)]
blk-wbt: remove wbt_track stub
cppcheck returns this warning
[block/blk-wbt.h:104] -> [block/blk-wbt.c:592]:
(warning) Function 'wbt_track' argument order different:
declaration 'rq, flags, ' definition 'rqos, rq, bio'
In commit c1c80384c8f4 ("block: remove external dependency on wbt_flags")
wbt_track was removed for the real declaration, its stub should
have been as well.
Linus Torvalds [Thu, 31 Mar 2022 18:43:01 +0000 (11:43 -0700)]
Merge tag 'hardening-v5.18-rc1-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"This addresses an -Warray-bounds warning found under a few ARM
defconfigs, and disables long-broken HARDENED_USERCOPY_PAGESPAN"
* tag 'hardening-v5.18-rc1-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
ARM/dma-mapping: Remove CMA code when not built with CMA
usercopy: Disable CONFIG_HARDENED_USERCOPY_PAGESPAN
Andrew Price [Tue, 22 Mar 2022 19:05:51 +0000 (19:05 +0000)]
gfs2: Make sure FITRIM minlen is rounded up to fs block size
Per fstrim(8) we must round up the minlen argument to the fs block size.
The current calculation doesn't take into account devices that have a
discard granularity and requested minlen less than 1 fs block, so the
value can get shifted away to zero in the translation to fs blocks.
The zero minlen passed to gfs2_rgrp_send_discards() then allows
sb_issue_discard() to be called with nr_sects == 0 which returns -EINVAL
and results in gfs2_rgrp_send_discards() returning -EIO.
Make sure minlen is never < 1 fs block by taking the max of the
requested minlen and the fs block size before comparing to the device's
discard granularity and shifting to fs blocks.
Fixes: 076f0faa764ab ("GFS2: Fix FITRIM argument handling") Signed-off-by: Andrew Price <[email protected]> Signed-off-by: Andreas Gruenbacher <[email protected]>
Linus Torvalds [Thu, 31 Mar 2022 18:23:31 +0000 (11:23 -0700)]
Merge tag 'net-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull more networking updates from Jakub Kicinski:
"Networking fixes and rethook patches.
Features:
- kprobes: rethook: x86: replace kretprobe trampoline with rethook
Current release - regressions:
- sfc: avoid null-deref on systems without NUMA awareness in the new
queue sizing code
Current release - new code bugs:
- vxlan: do not feed vxlan_vnifilter_dump_dev with non-vxlan devices
- eth: lan966x: fix null-deref on PHY pointer in timestamp ioctl when
interface is down
Previous releases - always broken:
- openvswitch: correct neighbor discovery target mask field in the
flow dump
- wireguard: ignore v6 endpoints when ipv6 is disabled and fix a leak
- rxrpc: fix call timer start racing with call destruction
- rxrpc: fix null-deref when security type is rxrpc_no_security
- can: fix UAF bugs around echo skbs in multiple drivers
Misc:
- docs: move netdev-FAQ to the 'process' section of the
documentation"
* tag 'net-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
vxlan: do not feed vxlan_vnifilter_dump_dev with non vxlan devices
openvswitch: Add recirc_id to recirc warning
rxrpc: fix some null-ptr-deref bugs in server_key.c
rxrpc: Fix call timer start racing with call destruction
net: hns3: fix software vlan talbe of vlan 0 inconsistent with hardware
net: hns3: fix the concurrency between functions reading debugfs
docs: netdev: move the netdev-FAQ to the process pages
docs: netdev: broaden the new vs old code formatting guidelines
docs: netdev: call out the merge window in tag checking
docs: netdev: add missing back ticks
docs: netdev: make the testing requirement more stringent
docs: netdev: add a question about re-posting frequency
docs: netdev: rephrase the 'should I update patchwork' question
docs: netdev: rephrase the 'Under review' question
docs: netdev: shorten the name and mention msgid for patch status
docs: netdev: note that RFC postings are allowed any time
docs: netdev: turn the net-next closed into a Warning
docs: netdev: move the patch marking section up
docs: netdev: minor reword
docs: netdev: replace references to old archives
...
Kees Cook [Wed, 9 Mar 2022 17:37:31 +0000 (09:37 -0800)]
ARM/dma-mapping: Remove CMA code when not built with CMA
The MAX_CMA_AREAS could be set to 0, which would result in code that would
attempt to operate beyond the end of a zero-sized array. If CONFIG_CMA
is disabled, just remove this code entirely. Found when building arm
on GCC 10.x for several defconfigs (e.g. axm55xx_defconfig) under
-Warray-bounds:
Eric Dumazet [Wed, 30 Mar 2022 19:46:43 +0000 (12:46 -0700)]
vxlan: do not feed vxlan_vnifilter_dump_dev with non vxlan devices
vxlan_vnifilter_dump_dev() assumes it is called only
for vxlan devices. Make sure it is the case.
BUG: KASAN: slab-out-of-bounds in vxlan_vnifilter_dump_dev+0x9a0/0xb40 drivers/net/vxlan/vxlan_vnifilter.c:349
Read of size 4 at addr ffff888060d1ce70 by task syz-executor.3/17662
Jakub Kicinski [Thu, 31 Mar 2022 15:36:17 +0000 (08:36 -0700)]
Merge tag 'linux-can-fixes-for-5.18-20220331' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2022-03-31
The first patch is by Oliver Hartkopp and fixes MSG_PEEK feature in
the CAN ISOTP protocol (broken in net-next for v5.18 only).
Tom Rix's patch for the mcp251xfd driver fixes the propagation of an
error value in case of an error.
A patch by me for the m_can driver fixes a use-after-free in the xmit
handler for m_can IP cores v3.0.x.
Hangyu Hua contributes 3 patches fixing the same double free in the
error path of the xmit handler in the ems_usb, usb_8dev and mcba_usb
USB CAN driver.
Pavel Skripkin contributes a patch for the mcba_usb driver to properly
check the endpoint type.
The last patch is by me and fixes a mem leak in the gs_usb, which was
introduced in net-next for v5.18.
* tag 'linux-can-fixes-for-5.18-20220331' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: gs_usb: gs_make_candev(): fix memory leak for devices with extended bit timing configuration
can: mcba_usb: properly check endpoint type
can: mcba_usb: mcba_usb_start_xmit(): fix double dev_kfree_skb in error path
can: usb_8dev: usb_8dev_start_xmit(): fix double dev_kfree_skb() in error path
can: ems_usb: ems_usb_start_xmit(): fix double dev_kfree_skb() in error path
can: m_can: m_can_tx_handler(): fix use after free of skb
can: mcp251xfd: mcp251xfd_register_get_dev_id(): fix return of error value
can: isotp: restore accidentally removed MSG_PEEK feature
====================
drivers/pci/controller/pci-hyperv.c:769:13: error: ‘hv_set_msi_entry_from_desc’ defined but not used [-Werror=unused-function]
769 | static void hv_set_msi_entry_from_desc(union hv_msi_entry *msi_entry,
The arm64 implementation of hv_set_msi_entry_from_desc() is not used after d06957d7a692 ("PCI: hv: Avoid the retarget interrupt hypercall in
irq_unmask() on ARM64"), so remove it.
Paulo Alcantara [Tue, 29 Mar 2022 19:20:06 +0000 (16:20 -0300)]
cifs: fix NULL ptr dereference in smb2_ioctl_query_info()
When calling smb2_ioctl_query_info() with invalid
smb_query_info::flags, a NULL ptr dereference is triggered when trying
to kfree() uninitialised rqst[n].rq_iov array.
This also fixes leaked paths that are created in SMB2_open_init()
which required SMB2_open_free() to properly free them.
Paulo Alcantara [Tue, 29 Mar 2022 19:20:05 +0000 (16:20 -0300)]
cifs: prevent bad output lengths in smb2_ioctl_query_info()
When calling smb2_ioctl_query_info() with
smb_query_info::flags=PASSTHRU_FSCTL and
smb_query_info::output_buffer_length=0, the following would return
0x10
rather than a valid pointer thus making IS_ERR() check fail. This
would then cause a NULL ptr deference in @buffer when accessing it
later in smb2_ioctl_query_ioctl(). While at it, prevent having a
@buffer smaller than 8 bytes to correctly handle SMB2_SET_INFO
FileEndOfFileInformation requests when
smb_query_info::flags=PASSTHRU_SET_INFO.
Here is a small C reproducer which triggers a NULL ptr in @buffer when
passing an invalid smb_query_info::flags
Steve French [Mon, 28 Mar 2022 22:45:55 +0000 (17:45 -0500)]
smb3: fix ksmbd bigendian bug in oplock break, and move its struct to smbfs_common
Fix an endian bug in ksmbd for one remaining use of
Persistent/VolatileFid that unnecessarily converted it (it is an
opaque endian field that does not need to be and should not
be converted) in oplock_break for ksmbd, and move the definitions
for the oplock and lease break protocol requests and responses
to fs/smbfs_common/smb2pdu.h
Also move a few more definitions for various protocol requests
that were duplicated (in fs/cifs/smb2pdu.h and fs/ksmbd/smb2pdu.h)
into fs/smbfs_common/smb2pdu.h including:
- various ioctls and reparse structures
- validate negotiate request and response structs
- duplicate extents structs
Zhang Wensheng [Thu, 10 Mar 2022 09:32:24 +0000 (17:32 +0800)]
nbd: fix possible overflow on 'first_minor' in nbd_dev_add()
When 'index' is a big numbers, it may become negative which forced
to 'int'. then 'index << part_shift' might overflow to a positive
value that is not greater than '0xfffff', then sysfs might complains
about duplicate creation. Because of this, move the 'index' judgment
to the front will fix it and be better.
In light of the recent controversy surrounding the (lack of)
maintenance of the in-tree DRBD driver, we have decided to add myself
as co-maintainer. This allows us to better distribute the workload and
reduce the chance of patches getting lost.
I will be keeping an eye on the mailing list in order to ensure that all
patches get the attention they need.
Randy Dunlap [Sat, 12 Mar 2022 06:36:09 +0000 (07:36 +0100)]
ARM: 9187/1: JIVE: fix return value of __setup handler
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) argument or environment
strings. Also, error return codes don't mean anything to
obsolete_checksetup() -- only non-zero (usually 1) or zero.
So return 1 from jive_mtdset().
Masahiro Yamada [Thu, 31 Mar 2022 08:47:09 +0000 (09:47 +0100)]
ARM: 9189/1: decompressor: fix unneeded rebuilds of library objects
Since commit 251cc826be7d ("ARM: 9154/1: decompressor: do not copy source
files while building"), the following three are rebuilt every time.
AS arch/arm/boot/compressed/lib1funcs.o
AS arch/arm/boot/compressed/ashldi3.o
AS arch/arm/boot/compressed/bswapsdi2.o
Move the "OBJS += ..." line up so these objects are added to 'targets'.
Fixes: 251cc826be7d ("ARM: 9154/1: decompressor: do not copy source files while building") Reported-by: Russell King (Oracle) <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]> Signed-off-by: Russell King (Oracle) <[email protected]>
Xiaolong Huang [Wed, 30 Mar 2022 14:22:14 +0000 (15:22 +0100)]
rxrpc: fix some null-ptr-deref bugs in server_key.c
Some function calls are not implemented in rxrpc_no_security, there are
preparse_server_key, free_preparse_server_key and destroy_server_key.
When rxrpc security type is rxrpc_no_security, user can easily trigger a
null-ptr-deref bug via ioctl. So judgment should be added to prevent it
When splitting a value entry, we may need to add the new nodes to the LRU
list and remove the parent node from the LRU list. The WARN_ON checks
in shadow_lru_isolate() catch this oversight. This bug was latent
until we stopped splitting folios in shrink_page_list() with commit 820c4e2e6f51 ("mm/vmscan: Free non-shmem folios without splitting them").
That allows the creation of large shadow entries, and subsequently when
trying to page in a small page, we will split the large shadow entry
in __filemap_add_folio().
Jakob Koschel [Thu, 31 Mar 2022 09:12:18 +0000 (11:12 +0200)]
block: use dedicated list iterator variable
To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.
To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable instead of a
found boolean [1].
David Howells [Wed, 30 Mar 2022 14:39:16 +0000 (15:39 +0100)]
rxrpc: Fix call timer start racing with call destruction
The rxrpc_call struct has a timer used to handle various timed events
relating to a call. This timer can get started from the packet input
routines that are run in softirq mode with just the RCU read lock held.
Unfortunately, because only the RCU read lock is held - and neither ref or
other lock is taken - the call can start getting destroyed at the same time
a packet comes in addressed to that call. This causes the timer - which
was already stopped - to get restarted. Later, the timer dispatch code may
then oops if the timer got deallocated first.
Fix this by trying to take a ref on the rxrpc_call struct and, if
successful, passing that ref along to the timer. If the timer was already
running, the ref is discarded.
The timer completion routine can then pass the ref along to the call's work
item when it queues it. If the timer or work item where already
queued/running, the extra ref is discarded.
Guangbin Huang [Wed, 30 Mar 2022 13:45:06 +0000 (21:45 +0800)]
net: hns3: fix software vlan talbe of vlan 0 inconsistent with hardware
When user delete vlan 0, as driver will not delete vlan 0 for hardware in
function hclge_set_vlan_filter_hw(), so vlan 0 in software vlan talbe should
not be deleted.
Fixes: fe4144d47eef ("net: hns3: sync VLAN filter entries when kill VLAN ID failed") Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
Yufeng Mo [Wed, 30 Mar 2022 13:45:05 +0000 (21:45 +0800)]
net: hns3: fix the concurrency between functions reading debugfs
Currently, the debugfs mechanism is that all functions share a
global variable to save the pointer for obtaining data. When
different functions concurrently access the same file node,
repeated release exceptions occur. Therefore, the granularity
of the pointer for storing the obtained data is adjusted to be
private for each function.
Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process") Signed-off-by: Yufeng Mo <[email protected]> Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
====================
docs: update and move the netdev-FAQ
A section of documentation for tree-specific process quirks had
been created a while back. There's only one tree in it, so far,
the tip tree, but the contents seem to answer similar questions
as we answer in the netdev-FAQ. Move the netdev-FAQ.
Take this opportunity to touch up and update a few sections.
v3: remove some confrontational? language from patch 7
v2: remove non-git in patch 3
add patch 5
====================
Jakub Kicinski [Wed, 30 Mar 2022 04:24:54 +0000 (21:24 -0700)]
docs: netdev: move the patch marking section up
We want people to mark their patches with net and net-next in the subject.
Many miss doing that. Move the FAQ section which points that out up, and
place it after the section which enumerates the trees, that seems like
a pretty logical place for it. Since the two sections are together we
can remove a little bit (not too much) of the repetition.
v2: also remove the text for non-git setups, we want people to use git.
can: gs_usb: gs_make_candev(): fix memory leak for devices with extended bit timing configuration
Some CAN-FD capable devices offer extended bit timing information for
the data bit timing. The information must be read with an USB control
message. The memory for this message is allocated but not free()ed (in
the non error case). This patch adds the missing free.
Pavel Skripkin [Sun, 13 Mar 2022 10:09:03 +0000 (13:09 +0300)]
can: mcba_usb: properly check endpoint type
Syzbot reported warning in usb_submit_urb() which is caused by wrong
endpoint type. We should check that in endpoint is actually present to
prevent this warning.
Found pipes are now saved to struct mcba_priv and code uses them
directly instead of making pipes in place.
Hangyu Hua [Fri, 11 Mar 2022 08:02:08 +0000 (16:02 +0800)]
can: mcba_usb: mcba_usb_start_xmit(): fix double dev_kfree_skb in error path
There is no need to call dev_kfree_skb() when usb_submit_urb() fails
because can_put_echo_skb() deletes original skb and
can_free_echo_skb() deletes the cloned skb.
Hangyu Hua [Fri, 11 Mar 2022 08:06:14 +0000 (16:06 +0800)]
can: usb_8dev: usb_8dev_start_xmit(): fix double dev_kfree_skb() in error path
There is no need to call dev_kfree_skb() when usb_submit_urb() fails
because can_put_echo_skb() deletes original skb and
can_free_echo_skb() deletes the cloned skb.
Hangyu Hua [Mon, 28 Feb 2022 08:36:39 +0000 (16:36 +0800)]
can: ems_usb: ems_usb_start_xmit(): fix double dev_kfree_skb() in error path
There is no need to call dev_kfree_skb() when usb_submit_urb() fails
beacause can_put_echo_skb() deletes the original skb and
can_free_echo_skb() deletes the cloned skb.
can: m_can: m_can_tx_handler(): fix use after free of skb
can_put_echo_skb() will clone skb then free the skb. Move the
can_put_echo_skb() for the m_can version 3.0.x directly before the
start of the xmit in hardware, similar to the 3.1.x branch.
Tom Rix [Sat, 19 Mar 2022 15:31:28 +0000 (08:31 -0700)]
can: mcp251xfd: mcp251xfd_register_get_dev_id(): fix return of error value
Clang static analysis reports this issue:
| mcp251xfd-core.c:1813:7: warning: The left operand
| of '&' is a garbage value
| FIELD_GET(MCP251XFD_REG_DEVID_ID_MASK, dev_id),
| ^ ~~~~~~
dev_id is set in a successful call to mcp251xfd_register_get_dev_id().
Though the status of calls made by mcp251xfd_register_get_dev_id() are
checked and handled, their status' are not returned. So return err.
In commit 42bf50a1795a ("can: isotp: support MSG_TRUNC flag when
reading from socket") a new check for recvmsg flags has been
introduced that only checked for the flags that are handled in
isotp_recvmsg() itself.
This accidentally removed the MSG_PEEK feature flag which is processed
later in the call chain in __skb_try_recv_from_queue().
Add MSG_PEEK to the set of valid flags to restore the feature.
Niklas Cassel [Tue, 8 Mar 2022 13:28:05 +0000 (14:28 +0100)]
riscv: dts: canaan: Fix SPI3 bus width
According to the K210 Standalone SDK Programming guide:
https://canaan-creative.com/wp-content/uploads/2020/03/kendryte_standalone_programming_guide_20190311144158_en.pdf
Section 15.4.3.3:
SPI0 and SPI1 supports: standard, dual, quad and octal transfers.
SPI3 supports: standard, dual and quad transfers (octal is not supported).
In order to support quad transfers (Quad SPI), SPI3 must have four IO wires
connected to the SPI flash.
Update the device tree to specify the correct bus width.
Tested on maix bit, maix dock and maixduino, which all have the same
SPI flash (gd25lq128d) connected to SPI3. maix go is untested, but it
would not make sense for this k210 board to be designed differently.
The LLVM make variable allows a developer to quickly switch between the
GNU and LLVM tools. However, it does not handle versioned binaries, such
as the ones shipped by Debian, as LLVM=1 just defines the tool variables
with the unversioned binaries.
There was some discussion during the review of the patch that introduces
LLVM=1 around versioned binaries, ultimately coming to the conclusion
that developers can just add the folder that contains the unversioned
binaries to their PATH, as Debian's versioned suffixed binaries are
really just symlinks to the unversioned binaries in /usr/lib/llvm-#/bin:
However, that can be cumbersome to developers who are constantly testing
series with different toolchains and versions. It is simple enough to
support these versioned binaries directly in the Kbuild system by
allowing the developer to specify the version suffix with LLVM=, which
is shorter than the above suggestion:
$ make ... LLVM=-14
It does not change the meaning of LLVM=1 (which will continue to use
unversioned binaries) and it does not add too much additional complexity
to the existing $(LLVM) code, while allowing developers to quickly test
their series with different versions of the whole LLVM suite of tools.
Some developers may build LLVM from source but not add the binaries to
their PATH, as they may not want to use that toolchain systemwide.
Support those developers by allowing them to supply the directory that
the LLVM tools are available in, as it is no more complex to support
than the version suffix change above.
$ make ... LLVM=/path/to/llvm/
Update and reorder the documentation to reflect these new additions.
At the same time, notate that LLVM=0 is not the same as just omitting it
altogether, which has confused people in the past.
Masahiro Yamada [Sat, 5 Mar 2022 12:56:05 +0000 (21:56 +0900)]
kbuild: add --target to correctly cross-compile UAPI headers with Clang
When you compile-test UAPI headers (CONFIG_UAPI_HEADER_TEST=y) with
Clang, they are currently compiled for the host target (likely x86_64)
regardless of the given ARCH=.
In fact, some exported headers include libc headers. For example,
include/uapi/linux/agpgart.h includes <stdlib.h> after being exported.
The header search paths should match to the target we are compiling
them for.
Pick up the --target triple from KBUILD_CFLAGS in the same ways as
commit 7f58b487e9ff ("kbuild: make Clang build userprogs for target
architecture").
Masahiro Yamada [Sun, 6 Mar 2022 07:25:35 +0000 (16:25 +0900)]
fixdep: use fflush() and ferror() to ensure successful write to files
Currently, fixdep checks the return value from (v)printf(), but it does
not ensure the complete write to the .cmd file.
printf() just writes data to the internal buffer, which usually succeeds.
(Of course, it may fail for another reason, for example when the file
descriptor is closed, but that is another story.)
When the buffer (4k?) is full, an actual write occurs, and printf() may
really fail. One of typical cases is "No space left on device" when the
disk is full.
The data remaining in the buffer will be pushed out to the file when
the program exits, but we never know if it is successful.
One straight-forward fix would be to add the following code at the end
of the program.
ret = fflush(stdout);
if (ret < 0) {
/* error handling */
}
However, it is tedious to check the return code in all the call sites
of printf(), fflush(), fclose(), and whatever can cause actual writes
to the end device. Doing that lets the program bail out at the first
failure but is usually not worth the effort.
Instead, let's check the error status from ferror(). This is 'sticky',
so you need to check it just once. You still need to call fflush().
Randy Dunlap [Wed, 30 Mar 2022 01:20:25 +0000 (18:20 -0700)]
net: sparx5: uses, depends on BRIDGE or !BRIDGE
Fix build errors when BRIDGE=m and SPARX5_SWITCH=y:
riscv64-linux-ld: drivers/net/ethernet/microchip/sparx5/sparx5_switchdev.o: in function `.L305':
sparx5_switchdev.c:(.text+0xdb0): undefined reference to `br_vlan_enabled'
riscv64-linux-ld: drivers/net/ethernet/microchip/sparx5/sparx5_switchdev.o: in function `.L283':
sparx5_switchdev.c:(.text+0xee0): undefined reference to `br_vlan_enabled'
Jakub Kicinski [Thu, 31 Mar 2022 02:14:11 +0000 (19:14 -0700)]
Merge branch 'wireguard-patches-for-5-18-rc1'
Jason A. Donenfeld says:
====================
wireguard patches for 5.18-rc1
Here's a small set of fixes for the next net push:
1) Pipacs reported a CFI violation in a cleanup routine, which he
triggered using grsec's RAP. I haven't seen reports of this yet from
the Android/CFI world yet, but it's only a matter of time there.
2) A small rng cleanup to the self test harness to make it initialize
faster on 5.18.
3) Wang reported and fixed a skb leak for CONFIG_IPV6=n.
4) After Wang's fix for the direct leak, I investigated how that code
path even could be hit, and found that the netlink layer still
handles IPv6 endpoints, when it probably shouldn't.
====================
wireguard: socket: ignore v6 endpoints when ipv6 is disabled
The previous commit fixed a memory leak on the send path in the event
that IPv6 is disabled at compile time, but how did a packet even arrive
there to begin with? It turns out we have previously allowed IPv6
endpoints even when IPv6 support is disabled at compile time. This is
awkward and inconsistent. Instead, let's just ignore all things IPv6,
the same way we do other malformed endpoints, in the case where IPv6 is
disabled.
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
In function wg_socket_send_buffer_as_reply_to_skb() or wg_socket_send_
buffer_to_peer(), the semantics of send6() is required to free skb. But
when CONFIG_IPV6 is disable, kfree_skb() is missing. This patch adds it
to fix this bug.
Signed-off-by: Wang Hai <[email protected]> Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
The seed_rng() function was written to work across lots of old kernels,
back when WireGuard used a big compatibility layer. Now that things have
evolved, we can vastly simplify this, by just marking the RNG as seeded.
projects / linux.git / log